Certified Oilfield Rentals TECHNICAL SPECIFICATIONS

COR HANDLED TUBULARS

DRILLPIPE

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

6-5/8 OD, S-135, 27.7 lb./ft

PIPE: Manufacturer Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Polar Section Modulus Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating

: Mannesmann : 6.625 x 5.900 : S-135, range 2 : 27.72 lb./ft, IEU : 0.362 : 7.1226 sq. in : 21.156 cu in : 4,611 psi (Premium) : 11,802 psi (Premium) : 760,352 lb. (Premium) : 108,343 ft/lb. (Premium) : 31.35 ft : TK-34

TOOL JOINTS: Tool Joint OD/ID Tool Joint Length Connection Hardfacing Tensile Yield Torsional Yield Optimum Make Up Torque Max Make Up Torque Drift Diameter

: 8 x 5 : 10 Pin x 11 Box : 6-5/8 FH : Arnco 200XT : 1,448,405 lb. (New) : 73,660 ft/lb. (New) : 36,830 ft/lb. (New) : 44,200 ft/lb. (New) : 4.875

Saga/Hydro/Statoil spec. 50-030

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

6-5/8 OD, S-135, 25.2 lb./ft

PIPE (Premium): Manufacturer Pipe OD/ID Grade & Range Nominal Weight & Upset Adjusted Weight Wall Thickness Section Area body of Pipe Polar Section Modulus Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : Grant Prideco : 6.625 x 5.965 : S-135, range 2 : 25.20 lb./ft, IEU : 27.15 lbs./ft : 0.330 : 6.526 sq. in (new) : 9.786 cu in (new) : 3,429 psi (Premium) : 10,759 psi (Premium) : 697,438 lb. (Premium) : 100,379 ft/lb. (Premium) : 31.35 ft : TK-34

TOOL JOINTS: Tool Joint OD/ID Tool Joint Length Connection Hardfacing Tensile Yield Torsional Yield Optimum Make Up Torque Max Make Up Torque Drift Diameter

: 8 x 5 : 10 Pin x 11 Box : 6-5/8 FH : Arnco 200XT : 1,448,416 lb. (New) : 73,661 ft/lb. (New) : 36,830 ft/lb. (New) : 44,200 ft/lb. (New) : 4.875

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

5-7/8 OD, S-135, 26.30 lb./ft

PIPE (Premium): Manufacturer Pipe OD/ID Grade & Range Nominal Weight & Upset Wall Thickness Section Area body of Pipe Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : Grant Prideco : 5.7/8 : S-135, range 2 : 26.30 lb./ft, IEU : 0.415 : 9.083 sq. in (new) : 9,368 psi (Premium) : 15,258 psi (Premium) : 757,100 lb. (Premium) : 74,000 ft/lb. (Premium) : 31.00 ft : TK-34

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Tensile Yield Torsional Yield Optimum Make Up Torque Max Make Up Torque Drift Diameter

: 7 x 4-1/4 : XT-57 : Tuboscope TCS Titanium 3./32 : 1,208,700 lb. (New) : 94,300 ft/lb. (New) : 56,600 ft/lb. (New) : 33,800 ft/lb. (New) : 4.125

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

5-1/2 OD, S-135, 24.70 lbs./ft, 5-1/2 FH-DSTJ

PIPE: Manufacturer Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Polar Section Modulus Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint : NKK : 5.5 x 4.670 : S-135, range 2 : 24.70 lb./ft, IEU : 0.415 : 6.629 sq. in : 7.844 cu in : 17,023 psi (New) : 17,826 psi (New) : 894,999 lb. (New) : 101,833 ft/lb. (New) : 31.6 ft

TOOL JOINTS: Tool Joint OD/ID Tool Joint Length Connection Hardfacing Tensile Yield Torsional Yield Minimum Make Up Torque Optimum Make Up Torque Maximum Make Up Torque Drift Diameter

: 7 x 4 : 10 Pin x 12 Box : 5-1/2 FH DSTJ High Torque : Arnco 300XT : 1,371,300 lb.(New) : 75,020 ft/lb.(New) : 33,200 ft/lb : 41,500 ft/lb. : 52,500 ft/lb : 3.875

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

5-1/2 OD, G-105, 24.70 lbs./ft, 5-1/2 NKK-DSTJ

PIPE: Manufacturer Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Polar Section Modulus Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint : NKK : 5.5 x 4.670 : G-105, range 2 : 24.70 lb./ft, IEU : 0.415 : 6.629 sq. in : 7.844 cu in : 14,013 psi (New) : 13,865 psi (New) : 696,111 lb. (New) : 79,204 ft/lb. (New) : 31.6 ft

TOOL JOINTS: Tool Joint OD/ID Tool Joint Length Connection Hardfacing Tensile Yield Torsional Yield Minimum Make Up Torque Optimum Make Up Torque Maximum Make Up Torque Drift Diameter

: 7 x 4 : 10 Pin x 12 Box : 5-1/2 NKK-DSTJ : Tuboscope TCS Ti : 1,371,300 lb. (New) : 75,020 ft/lb. (New) : 33,200 ft/lb : 41,500 ft/lb. : 52,500 ft/lb. : 3.875

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

5-1/2 OD, G-105, 24.70 lbs./ft, 5-1/2 Tuff Torque

PIPE: Manufacturer Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Polar Section Modulus Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint : OMSCO : 5.5 x 4.670 : G-105, range 2 : 24.70 lb./ft, IEU : 0.415 : 6.629 sq. in : 7.844 cu in : 14,013 psi (New) : 13,865 psi (New) : 696,111 lb. (New) : 79,204 ft/lb. (New) : 31.6 ft

TOOL JOINTS: Tool Joint OD/ID Tool Joint Length Connection Hardfacing Tensile Yield Torsional Yield Minimum Make Up Torque Optimum Make Up Torque Maximum Make Up Torque Drift Diameter

: 7 x 4 : 10 Pin x 12 Box : 5-1/2 Omsco Tuff Torque : Arnco 100XT : 1,371,300 lb. (New) : 75,020 ft/lb. (New) : 33,200 ft/lb : 41,500 ft/lb. : 52,500 ft/lb. : 3.875

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

5-1/2 OD, S-135, 21.90 lbs/ft, Hydril WT-56

PIPE: Manufacturer Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Polar Section Modulus Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : Mannesmann : 5.5 x 4.778 : S-135, range 2 : 21.9 lb. /ft, IEU : 0.361 : 5.8282 sq. in : 14.062 cu in : 7,496 psi (Premium) : 14,177 psi (Premium) : 620,604 lb. (Premium) : 71,754 ft/lb. (Premium) : 31.5 ft : TK-34

TOOL JOINTS: Tool Joint OD/ID Tool Joint Length Connection Hardfacing Tensile Yield Torsional Yield Min Make Up Torque Recommended Make Up Torque Max Make Up Torque Drift Diameter

: 7 x 4-1/2 : 10 Pin x 15 Box : Hydril WT-56 : Arnco 200XT on Box Tool Joints : 1,473,000 lb. (New) : 126,000 ft/lb. (New) : 20,000 ft/lb. (New) : *24,000 ft/lb. : 99,000 ft/lb. : 4.375

Pipe manufactured according to API Spec 5D, Group 3 in connection with Statoil Spec. KP10-K300, plus Tool Joints configuration as per Hydril Spec. * Since additional torque does not produce additional tensile stress in the pin, downhole make-up will not create excessive stress in the tool joint. For this reason, using a lower make-up torque while tolerating subsequent downhole make-up is recommended.

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

5-1/2 OD, S-135, 21.90 lbs/ft, Grant HT-55-375

PIPE: Manufacturer Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Polar Section Modulus Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : Grant Prideco : 5.5 x 4.778 : S-135, range 2 : 21.9 lb. /ft, IEU : 0.361 : 5.8282 sq. in : 14.062 cu in : 7,496 psi (Premium) : 14,177 psi (Premium) : 620,604 lb. (Premium) : 71,754 ft/lb. (Premium) : 31.5 ft : TK-34

TOOL JOINTS:

Tool Joint OD/ID Tool Joint Length Connection Hardfacing Tensile Yield Torsional Yield Min Make Up Torque Max Make Up Torque Drift Diameter Capacity Open End Displacement Closed End Displacement

: 7 x 3-7/8 : 10 Pin x 15 Box : Grant HT55-375 : ARNCO 200XT on Box Tool Joints : 1,358,600 lb. (new) : 84,600 ft/lb. (new) : 35,900 ft/lb. : 50,700 ft/lb. : 3.750 : 11.29 ltr./mtr : 4.79 ltr. / mtr : 16.08 ltr./ mtr

Pipe is manufactured to Norsok specification M-CR-702, plus Grant Prideco spec. for High Torque configuration.

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

5-1/2 OD, S-135, 21.90 lbs/ft, 5-1/2 FH-DSTJ

PIPE: Manufacturer Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Polar Section Modulus Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint : NKK : 5.5 x 4.778 : S-135, range 2 : 21.9 lb./ft, IEU : 0.361 : 5.8282 sq. in : 14.062 cu in : 7,496 psi (Premium) : 14,177 psi (Premium) : 620,604 lb. (Premium) : 71,754 ft/lb. (Premium) : 31.6 ft

TOOL JOINTS: Tool Joint OD/ID Tool Joint Length Connection Hardfacing Tensile Yield Torsional Yield Min Make Up Torque Optimum Make Up Torque Max Make Up Torque Drift Diameter

: 7 x 3-1/2 : 10 Pin x 12 Box : 5-1/2 FH DSTJ High Torque : Arnco 100XT : 1,758,800 lb.(New) : 80,980 ft/lb.(New) : 33,200 ft/lb. : 46,560 ft/lb. : 73,500 ft/lb. : 3.375

10

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

5-1/2 OD, S-135, 21.90 lbs./ft, 5-1/2 FH-DSTJ

PIPE: Manufacturer Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Polar Section Modulus Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint : NKK : 5.5 x 4.778 : S-135, range 2 : 21.9 lb./ft, IEU : 0.361 : 5.8282 sq. in : 14.062 cu in : 12,679 psi (New) : 15,507 psi (New) : 786,809 lb. (New) : 91,278 ft/lb. (New) : 31.6 ft

TOOL JOINTS: Tool Joint OD/ID Tool Joint Length Connection Hardfacing Tensile Yield Torsional Yield Minimum Make Up Torque Optimum Make Up Torque Maximum Make Up Torque Drift Diameter

: 7 x 4 : 10 Pin x 12 Box : 5-1/2 FH DSTJ High Torque : Arnco 100XT : 1,371,300 lb.(New) : 75,020 ft/lb.(New) : 33,200 ft/lb : 41,500 ft/lb. : 52,500 ft/lb : 3.875

11

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

5-1/2 OD, G-105, 21.90 lbs./ft, 5-1/2 FH-DSTJ

PIPE: Manufacturer Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Polar Section Modulus Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint : NKK : 5.5 x 4.778 : G-105, range 2 : 21.9 lb./ft, IEU : 0.361 : 5.8282 sq. in : 14.062 cu in : 10,753 psi (New) : 12,061 psi (New) : 611,963 lb. (New) : 70,994 ft/lb. (New) : 31.6 ft

TOOL JOINTS: Tool Joint OD/ID Tool Joint Length Connection Hardfacing Tensile Yield Torsional Yield Minimum Make Up Torque Optimum Make Up Torque Maximum Make Up Torque Drift Diameter

: 7 x 4 : 10 Pin x 12 Box : 5-1/2 FH DSTJ High Torque : Arnco 100XT : 1,371,300 lb.(New) : 75,020 ft/lb.(New) : 33,200 ft/lb : 41,500 ft/lb. : 52,500 ft/lb. : 3.875

12

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

5 OD, C-120, 25.6 lbs/ft

Size Grade Weight Tensile Collapse Burst Connections Tool Joint Tool Joint OD Tool Joint ID Pipe ID Wall Thickness Drift Diameter Yield Pipe Make Up Torque Internal Coating Hardbanding : 5 : C-120 NKK Sour Service : 25.6 lb./ft (Actual 27.8 lb./ft) : 848,000 lbs : 21,600 psi : 21,000 psi : 4-1/2 IF (NC-50) : 18 Taper : 6-5/8 : 3-1/4 : 4.000 : 0.500 : 3.125 : 83,600 ft/lbs : 25,700 ft/lbs : Tubescope TK34 Plastic Coating : Smooth Type X Hardbanding on Box Tool Joints

Approximate:
Total Displacement Pipe Displacement : 1.443 Gallons Per Foot 0.034 BBLS Per Foot : 0.359 Gallons Per Foot 0.008 BBLS Per Foot

Actual
Capacity Displacement Upsets Per Pair Tool Joints : 0.687 Gallons Per Linear Foot 0.016 BBLS Per Linear Foot : 2.8240 Linear Foot Per Gallon : 7.86 Per Gallon :.66 Per Gallon

13

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

5 OD, S-135, 25.6 lbs/ft

PIPE

Manufacturer
Size Grade Weight Tensile Collapse Burst Torsional Strength

: NKK
: 5 : S-135 : 25.6 lb./ft (Actual 27.8 lb./ft) : 746,443 lbs (Premium) : 20,510 psi (premium) : 21,600 psi (premium) : 72,979 ft/lbs (premium)

TOOL JOINTS Connections Tool Joint Tool Joint OD Tool Joint ID Pipe ID Wall Thickness Drift Diameter Yield Pipe Torsional Strength Make Up Torque Internal Coating Hardbanding

: 4-1/2 IF (NC-50) : 18 Taper : 6-5/8 : 2-3/4 : 4.000 : 0.500 : 2.625 : 850,000 lbs : 63,400 ft/lbs : 38,034 ft/lbs : Tubescope TK34 Plastic Coating : Smooth Type X Hardbanding on Box Tool Joints

14

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

5 OD, S-135, 19.5 lb./ft, Hydril WT-50

PIPE: Pipe OD/ID/Wall Thickness Manufacturer Grade & Range Weight / Upset Section area body of pipe Polar Section Modulus Tensile Yield Collapse Pressure Internal Yield Pressure Torsional Yield Internal Plastic Coating Average Length Per Joint Quantity : 5 x 4.276 x 0.362 : Mannesmann : S-135, Range II : 19.5 lb./ft / IEU : 5.2746 sq. in. : 11.415 cu in. : 560,764 lb. (Premium) : 10,029 psi (Premium) : 15,638 psi (Premium) : 58,113 ft/lb. (Premium) : TK-34 : 31.3 ft : 15,300 ft

TOOL JOINTS: Tool Joint OD/ID Tool Joint Tong Space Connection Hard Facing Tensile Yield Torsional Yield Recommended Make-Up Torque Maximum Make-Up Torque Drift Diameter Capacity Open End Displacement Closed End Displacement

: 6-5/8 x 3-5/8 : 10 Pin x 15 Box : Hydril WT-50 : ARNCO 200XT On Box Tool Joints. : 1,710,000 lb.(New) : 110,000 ft/lb.(New) : 45,000 ft/lb. : 86,000 ft/lb. : 3-1/2 : 8.96 lt./mtr : 4.47 lt./mtr : 13.43 lt./mtr

*Since additional torque does not produce additional tensile stress in the pin, downhole make-up will not create excessive stress in the tool joint. For this reason, using a lower make-up torque can be considered if subsequent downhole make-up torque is acceptable. Pipe is manufactured to API specs and Statoil Spec. KP10-K300, and Hydril spec for tool joint configuration and threads.

15

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

5OD, S-135, 19.5 lb./ft

PIPE Pipe OD/ID/Wall Thickness Manufacturer Grade & Range Weight / Upset Section area body of pipe Polar Section Modulus Tensile Yield Collapse Pressure Internal Yield Pressure Torsional Yield Internal Plastic Coating Average Length Per Joint : 5 x 4.276 x 0.362 : Mannesmann : S-135, Range II : 19.5 lb./ft / IEU : 5.2746 sq. in. : 11.415 cu in. : 560,764 lbs (premium) : 10,029 psi (premium) : 15,638 psi (premium) : 58,113 ft/lb.(premium) : TK-34 : 31.3 ft

TOOL JOINTS: Tool Joint OD/ID Tool Joint Tong Space Connection Hard Facing Tensile Yield Torsional Yield Recommended Make-Up Torque Drift Diameter

: 6-5/8 x 3-1/4 : In Accordance with DSI Category 4 : NC 50 Pin x Box : None : 750,000 lbs (premium) : 47,280 ft/lbs (premium) : 28,370 ft/lbs : 3.125

Capacity Open End Displacement Closed End Displacement

: 8.96 lt./mtr : 4.47 lt./mtr : 13.43 lt./mtr

16

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

5OD, G-105, 19.5 lb./ft

PIPE: Pipe OD/ID/Wall Thickness Manufacturer Grade & Range Weight / Upset Section area body of pipe Polar Section Modulus Tensile Yield Collapse Pressure Internal Yield Pressure Torsional Yield Internal Plastic Coating Average Length Per Joint : 5 x 4.276 x 0.362 : Grant Prideco : G-105, Range II : 19.5 lb./ft / IEU : 5.2746 sq. in. : 11.415 cu in. : 436,150 lbs (premium) : 8,765 psi (premium) : 12,163 psi (premium) : 45,199 ft/lb.(premium) : None : 31.3 ft

TOOL JOINTS: Tool Joint OD/ID Tool Joint Tong Space Connection Hard Facing Tensile Yield Torsional Yield Recommended Make-Up Torque Drift Diameter

: 6-3/8 x 3-1/4 : In Accordance with DSI Category 4 : NC 50 Pin x Box : ARNCO 200XT : 750,000 lbs (premium) : 47,280 ft/lbs (premium) : +/- 21,920 ft/lbs : 3.125

Capacity Open End Displacement Closed End Displacement

: 8.96 lt./mtr : 4.47 lt./mtr : 13.43 lt./mtr

17

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

4 OD, S-135, 14.0 lb./ft Grant XT-39

PIPE: Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : 4.000 x 3.340 : S-135, Range 2 : 14.00 lb./ft, IEU : 0.330 : 3.805 sq. in : 13,836 psi (Premium) : 18,428 psi (Premium) : 403,500 lbs (Premium) : 32,800 ft/lbs (Premium) : 31.50 ft : Tubescope TK-34

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Tensile Yield Torsional Yield Minimum Make Up Torque Optimum Make Up Torque Maximum Make Up Torque Drift Diameter

: 4-7/8 x 2-9/16 : Grant XT-39 Pin x Box : ARNCO 100 XT, Box & Pin : 726,400 lbs : 30,400 ft/lbs : 12,278 ft/lbs : 17,760 ft/lbs : 22,200 ft/lbs : 2.438

18

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

4 OD, S-135T, 14.0 lb./ft Grant XTF-39

PIPE: Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : 4.000 x 3.340 : S-135T, Range 2 : 14.00 lb./ft, IEU : 0.330 : 3.805 sq. in : 13,836 psi (Premium) : 18,428 psi (Premium) : 403,500 lbs (Premium) : 32,800 ft/lbs (Premium) : 31.50 ft : Tubescope TK-34

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Tensile Yield Torsional Yield Minimum Make Up Torque Optimum Make Up Torque Maximum Make Up Torque Drift Diameter

: 5 x 2-9/16 : Grant XTF-39 Pin x Box : Tuboscope TCSTi : 726,400 lbs : 30,400 ft/lbs : 12,278 ft/lbs : 17,760 ft/lbs : 22,200 ft/lbs : 2.438

19

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

4 OD, XD-105, 14.0 lb./ft Grant XT-39

PIPE: Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : 4.000 x 3.340 : XD-105, Range 2 : 14.00 lb./ft, IEU : 0.330 : 3.805 sq. in : 15,896 psi (New) : 15,159 psi (New) : 399,500 lbs. (New) : 32,600 /lbs. (New) : 31.50 ft : Tuboscope TK-34

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Tensile Yield Torsional Yield Minimum Make Up Torque Optimum Make Up Torque Maximum Make Up Torque Drift Diameter

: 4-7/8 x 2-9/16 : Grant XT-39 Pin x Box : ARNCO 100 XT : 635,300 lbs. : 32,300 ft/lbs. : 12,200 ft/lbs. : 17,760 ft/lbs : 22,200 ft/lbs. : 2.438

20

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

4 OD, S-135, 14.0 lb./ft

PIPE: Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : 4.000 x 3.340 : S-135, Range 2 : 14.00 lb./ft, IEU : 0.330 : 3.805 sq. in : 13,836 psi (Premium) : 17,820 psi (Premium) : 403,527 lbs (Premium) : 32,752 ft/lbs (Premium) : 31.50 ft : Tubescope TK-34 (some)

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Torsional Yield Optimum Make Up Torque Drift Diameter

: 5-1/8 x 2-13/16 : 4 FH Pin x Box : ARNCO 200 XT, Box only : 23,350 ft/lbs : 14,010 ft/lbs : 2.688

21

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

3-1/2 OD, S-135, 15.5 lb./ft

PIPE: Manufacturer Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : : 3.500 x 2.602 : S-135, range 2 : 15.50 lb./ft, IEU : 0.449 : 4.304 sq. in : 26,049 psi (premium) : 27,710 psi (premium) : 451,115 lbs (premium) : 29,063 ft/lbs (premium) : 31.00 ft : TK-34

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Tensile Yield Torsional Yield Optimum Make Up Torque Drift Diameter

: 4-3/4 x 2-9/16 : NC 38 Pin x Box : None : 350,000 lbs (new) : 19,170 ft/lbs (new) : 11,500 ft/lbs (new) : 2.500

22

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

3-1/2 OD, S-135, 15.5 lb./ft

PIPE: Manufacturer Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : : 3.500 x 2.602 : S-135, range 2 : 15.50 lb./ft, IEU : 0.449 : 4.304 sq. in : 26,049 psi (premium) : 27,710 psi (premium) : 451,115 lbs (premium) : 29,063 ft/lbs (premium) : 31.00 ft : TK-34

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Tensile Yield Torsional Yield Optimum Make Up Torque Drift Diameter

: 5 x 2-9/16 : DSTJ-NC 38 Pin x Box : None : lbs (new) : ft/lbs (new) : ft/lbs (new) : 2.500

NKK DSTJ is totally Interchangeable with Standard 3-1/2IF (NC-38) Connections

23

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

3-1/2 OD, S-135, 15.50 lb./ft

PIPE: Manufacturer Pipe OD/ID Grade & Range Nominal Weight & Upset Wall Thickness Section Area body of Pipe Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : Baoshan China : 3.500 x 2.602 : S-135, range 2 : 15.50 lb./ft, IEU : 0.449 : 4.304 sq. in (new) : 26,049 psi (Premium) : 27,710 psi (Premium) : 451,115 lb. (Premium) : 29,063 ft/lb. (Premium) : 31.00 ft : TK-34

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Tensile Yield Torsional Yield Optimum Make Up Torque Max Make Up Torque Drift Diameter

: 5 x 2-9/16 : BGDS/DSTJ : None : 350,000 lb. (New) : 26,930 ft/lb. (New) : 18,900 ft/lb. (New) : 13,230 ft/lb. (New) : 2.500

Connection is fully Interchangeable with API 3-1/2IF (NC-38)

24

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

3-1/2 OD, G-105, 15.50 lb./ft GPDS38

PIPE: Pipe OD/ID Grade & Range Nominal Weight & Upset Wall Thickness Section Area body of Pipe Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : 3.500 x 2.764 : G-105, range 2 : 15.50 lb./ft, EU : 0.368 : 3.621 sq. in (new) : psi : psi : : : 31.50 ft : TK-34

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Tensile Yield Torsional Yield Minimum Make Up Torque Optimum Make Up Torque Max Make Up Torque Drift Diameter

: 5 x 2-9/16 : (NC-38) BGDS : ARNCO 300XT : 560,000 lb. (Premium) : 26,930 ft/lb. (Premium) : 12,200 ft/lb (Premium) : 14,900 ft/lb. (Premium) : 18,900 ft/lb. (Premium) : 2.500

Baoshan BGDS is fully Interchangeable with Standard 3-1/2 IF (NC-38) Connections

25

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

3-1/2 OD, S-135, 13.30 lb./ft GPDS38

PIPE (Premium): Manufacturer Pipe OD/ID Grade & Range Nominal Weight & Upset Wall Thickness Section Area body of Pipe Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : Grant Prideco : 3.500 : S-135, range 2 : 13.30 lb./ft, IEU : 0.368 : 5.144 sq. in (new) : 25,404 psi (Premium) : 24,840 psi (Premium) : 488,800 lb. (Premium) : 33,400 ft/lb. (Premium) : 31.00 ft : TK-34

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Tensile Yield Torsional Yield Optimum Make Up Torque Max Make Up Torque Drift Diameter

: 5 x 2-9/16 : GPSD38 : Tuboscope TCS Titanium 3./32 : 649,200 lb. (New) : 25,800 ft/lb. (New) : 15,500 ft/lb. (New) : 12,200 ft/lb. (New) : 2.438

Connection is fully Interchangeable with API 3-1/2IF (NC-38)

26

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

3-1/2 OD, S-135, 13.3 lb./ft

PIPE: Manufacturer Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : NKK : 3.500 x 2.764 : S-135, range 2 : 13.30 lb./ft, IEU : 0.368 : 3.621 sq. in : 21,626 psi (premium) : 23,708 psi (premium) : 381,900 lbs (premium) : 25,900 ft/lbs (premium) : 31.5 ft : TK-34

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Tensile Yield Torsional Yield Maximum Make Up Torque Drift Diameter

: 5 x 2-9/16 : NC-38 Pin x Box : ARNCO 200XT : 300,000 lbs (premium) : 20,140 ft/lbs (premium) : 12,220 ft/lbs (premium) : 2.500

27

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

3-1/2 OD, S-135, 13.3 lb./ft HT-38

PIPE: Manufacturer Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : Grant Prideco : 3.500 x 2.764 : S-135, range 2 : 13.30 lb./ft, IEU : 0.368 : 3.621 sq. in : 21,626 psi (premium) : 23,708 psi (premium) : 381,900 lbs (premium) : 25,900 ft/lbs (premium) : 31.5 ft : TK-34

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Tensile Yield Torsional Yield Maximum Make Up Torque Drift Diameter

: 5 x 2-9/16 : Grant HT-38 Pin x Box : Smooth X : 649,400 lbs (premium) : 29,600 ft/lbs (premium) : 17,800 ft/lbs (premium) : 2.500

28

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

3-1/2 OD, S-135, 9.50 lb./ft HT-38

PIPE: Manufacturer Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : Grant Prideco : 3.500 x 2.992 : S-135, range 2 : 9.50 lb./ft, IEU : 0.254 : 2.590 sq. in : 10,093 psi (premium) : 15,675 psi (premium) : 275,363 lbs (premium) : 19,968 ft/lbs (premium) : 31.5 ft : TK-34

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Tensile Yield Torsional Yield Maximum Make Up Torque Drift Diameter

: 4-3/4 x 2-11/16 : Grant HT-38 Pin x Box : Smooth X : 587,600 lbs (premium) : 25,300 ft/lbs (premium) : 15,200 ft/lbs (premium) : 2.500

29

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

3-1/2 OD, G-105, 13.3 lb./ft

PIPE: Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Ave Length per Joint Internal Plastic Coating : 3.500 x 2.764 : G-105, Range 2 : 13.30 lb./ft, IEU : 0.368 : 3.621 sq. in : 19,758 psi (New) : 19,320 psi (New) : 380,197 lbs (New) : 25,972 ft/lbs (New) : 31.5 ft : TK-34

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Tensile Yield Torsional Yield Minimum Make Up Torque Recommended Make Up Torque Maximum Make Up Torque Drift Diameter

: 5 x 2-9/16 : (NC-38) DSTJ : Flush : 560,000 lbs (premium) : 26,930 ft/lbs (premium) : 12,200 ft/lbs (premium) : 14,900 ft/lbs (premium) : 18,900 ft/lbs (premium) : 2.500

NKK DSTJ is totally Interchangeable with Standard 3-1/2IF (NC-38) Connections

30

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

2-7/8 OD, S-135, 10.4 lb./ft, Hydril WT-23

PIPE: Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Hook Load (new) Section Area body of Pipe Polar Sectional modulus Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Internal Plastic Coating : 2-7/8 x 2.151 : S-135, range 2 : 10.4 lb./ft, IEU : 0.362 : 385,820 lbs : 2.8579 sq. in : 3.204 cu. in. : 25,602 psi (Premium) : 27,197 psi (Premium) : 299,764 lb.(Premium) : 15,945 ft/lb. (Premium) : Nil

TOOL JOINTS: Tool Joint Manufacturer Material Tool Joint OD/ID Tool Joint Length Connection Hardfacing Bevel Diameter Tensile Yield Torsional Yield Make Up Torque Drift Diameter

: OMSCO Industries Ltd. : 4137 mod. : 3-1/8 x 1-1/2 : 9 Pin x 11 Box : Hydril WT-23 : Arnco 200XT Type J : 2-15/16 : 387,000 lb.(New) : 10,400 ft/lb.(New) : 5,500 ft/lb. : 1.375

31

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

2-7/8 OD, S-135, 10.4 lb./ft, PAC DS

PIPE: Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Hook Load (new) Section Area body of Pipe Polar Sectional modulus Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Internal Plastic Coating : 2-7/8 x 2.151 : S-135, range 2 : 10.4 lb./ft, IEU : 0.362 : 385,820 lbs : 2.8579 sq. in : 3.204 cu. in. : 25,602 psi (Premium) : 27,197 psi (Premium) : 299,764 lb.(Premium) : 15,945 ft/lb. (Premium) : Nil

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Tensile Yield Torsional Yield Make Up Torque Drift Diameter

: 3-1/8 x 1-1/2 : PAC DS (Double Shoulder) : Nil : 273,200 lbs (New) : 9,001 ft/lb.(New) : 5,401 ft/lb. : 1.375

32

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

2-7/8 OD, S-135, 10.4 lb./ft, PAC DSI

PIPE: Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Hook Load (new) Section Area body of Pipe Polar Sectional modulus Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Internal Plastic Coating : 2-7/8 x 2.151 : S-135, range 2 : 10.4 lb./ft, IEU : 0.362 : 385,820 lbs : 2.8579 sq. in : 3.204 cu. in. : 25,602 psi (Premium) : 27,197 psi (Premium) : 299,764 lb.(Premium) : 15,945 ft/lb. (Premium) : TK-34

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Tensile Yield Torsional Yield Make Up Torque Drift Diameter

: 3-1/8 x 1-1/2 : PAC DSI (Double Shoulder) : ARNCO 200XT : 273,200 lbs (New) : 9,001 ft/lb.(New) : 5,401 ft/lb. : 1.375

33

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

2-7/8 OD, E-75, 10.4 lb./ft, PAC

PIPE: Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Polar Sectional modulus Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Internal Plastic Coating : 2-7/8 x 2.151 : Grade E-75, range 2 : 10.4 lb./ft, IEU : 0.362 : 2.8579 sq. in : 3.204 cu. in. : 14,223 psi (Premium) : 15,110 psi (Premium) : 166,535 lb. (Premium) : 8,858 ft/lb. (Premium) : Nil

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Bevel Diameter Tensile Yield Torsional Yield Make Up Torque Drift Diameter

: 3-1/8 x 1-1/2 : American PAC : Nil : 2-15/16 : 269,470 lb.(New) : 5,800 ft/lb.(New) : 2,900 ft/lb. : 1.375

34

Certified Oilfield Rentals

Middle East Far East Africa Australia
www.cor.com.sg

Drillpipe Specifications

2-3/8 OD, E-75, 6.65 lb./ft

PIPE: Pipe OD/ID Grade & Range Weight & Upset Wall Thickness Section Area body of Pipe Polar Sectional modulus Collapse Pressure Internal Yield Pressure Tensile Yield Torsional Yield Internal Plastic Coating : 2-3/8 x 1.815 : Grade E-75, Range 2 : 6.65 lb./ft, IEU : 0.280 : 2.587 sq. in : 0.867 cu. in. : 13,378 psi (Premium) : 14,147 psi (Premium) : 107,616 lbs. (Premium) : 4,811 ft/lb. (Premium) : Nil

TOOL JOINTS: Tool Joint OD/ID Connection Hardfacing Tensile Yield Torsional Yield Make Up Torque Drift Diameter

: 3-3/8 x 1-3/4 : NC 26 (2-3/8 IF) : Nil : 155,000 lbs (New) : 6,880 ft/lb. (New) : 4,130 ft/lb. : 1.625

35