Scribd
Upload
140 views

What Is HUB

A hub is a common connection point for devices in a network that copies packets arriving at one port to all other ports so all network segments can see all packets. Intelligent hubs can monitor and configure port traffic while switching hubs forward packets only to the correct port based on the destination address. A switch is a networking device that connects network segments and processes and routes data at the data link layer, forwarding messages only to the device for which the message is intended. Switches play an integral role in modern Ethernet LANs, with many offices using multiple linked managed switches to access broadband internet services. A router is a device that forwards data packets between different networks using headers and forwarding tables to determine the best path

Uploaded by

anon_292580296
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
140 views

What Is HUB

A hub is a common connection point for devices in a network that copies packets arriving at one port to all other ports so all network segments can see all packets. Intelligent hubs can monitor and configure port traffic while switching hubs forward packets only to the correct port based on the destination address. A switch is a networking device that connects network segments and processes and routes data at the data link layer, forwarding messages only to the device for which the message is intended. Switches play an integral role in modern Ethernet LANs, with many offices using multiple linked managed switches to access broadband internet services. A router is a device that forwards data packets between different networks using headers and forwarding tables to determine the best path

Uploaded by

anon_292580296
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

What is HUB? A common connection point for devices in a network. Hubs are commonly used to connect segments of a LAN.

A hub contains multiple ports. When apacket arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets. A passive hub serves simply as a conduit for the data, enabling it to go from one device (or segment) to another. So-called intelligent hubs include additional features that enables an administrator to monitor the traffic passing through the hub and to configure each port in the hub. Intelligent hubs are also called manageable hubs. A third type of hub, called a switching hub, actually reads the destination address of each packet and then forwards the packet to the correct port.

What is switch? A network switch or switching hub is a computer networking device that connects network segments or network devices. The term commonly refers to a multiport network bridge that processes and routes data at the data link layer (layer 2) of the OSI model. Switches that additionally process data at the network layer (layer 3) and above are often referred to as layer-3 switches or multilayer switches. A switch is a telecommunication device which receives a message from any device connected to it and then transmits the message only to that device for which the message was meant. This makes the switch a more intelligent device than a hub (which receives a message and then transmits it to all the other devices on its network.) The network switch plays an integral part in most modern Ethernet local area networks (LANs). Mid-to-large sized LANs contain a number of linked managed switches. Small office/home office (SOHO) applications typically use a single switch, or an all-purpose converged device such as a residential gateway to access small office/home broadband services such as DSL or cable internet. In most of

these cases, the end-user device contains a router and components that interface to the particular physical broadband technology. User devices may also include a telephone interface for VoIP.

What is Router? A device that forwards data packets along networks. A router is connected to at least two networks, commonly two LANs or WANs or a LAN and its ISPs network. Routers are located at gateways, the places where two or more networks connect. Routers use headers and forwarding tables to determine the best path for forwarding the packets, and they use protocols such as ICMP to communicate with each other and configure the best route between any two hosts. Very little filtering of data is done through routers.

You might also like