Scribd
Upload
109 views

Honam Honam: Description

This document provides general information about J-570S, a polypropylene random copolymer for injection molding applications. It has high transparency, good mechanical balance, high gloss, high flow and low smell. It is designed to be processed in conventional injection molding equipment. Some key physical properties include a melt flow index of 28 g/10min, density of 0.9 g/cm3, tensile stress of 300 kg/cm2, tensile strain of more than 100%, and flexural modulus of 13,000 kg/cm2. It can be used for applications such as food containers, stationery, disposable syringes, and CD/DVD cases.

Uploaded by

sirartur5
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
109 views

Honam Honam: Description

This document provides general information about J-570S, a polypropylene random copolymer for injection molding applications. It has high transparency, good mechanical balance, high gloss, high flow and low smell. It is designed to be processed in conventional injection molding equipment. Some key physical properties include a melt flow index of 28 g/10min, density of 0.9 g/cm3, tensile stress of 300 kg/cm2, tensile strain of more than 100%, and flexural modulus of 13,000 kg/cm2. It can be used for applications such as food containers, stationery, disposable syringes, and CD/DVD cases.

Uploaded by

sirartur5
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 1

HONAM

SEETEC

P ETROCHEMICAL CORP .

October, 2011

J-570S
General Information

PP RANDOM COPOLYMER

Description
J-570S is a nucleated random copolymer for injection molding applications using the spheripol process licensed by Basell. This grade is designed to be processed in conventional injection molding equipment and offers high transparency, good mechanical balance, high gloss, high flow and low smell.

Applications
Food container, Stationery, Disposable syringe, CD/DVD case High transparency TWIM parts Physical Properties1
Physical Melt Flow Index Density Mechanical Tensile Stress (Yield) Tensile Strain (Break) Flexural Modulus Rockwell Hardness Impact Notched Izod Impact Strength (23) Notched Izod Impact Strength (-10) Thermal Heat Deflection Temperature (4.6kgf/cm2) ASTM D648 95 ASTM D256 ASTM D256 5.0 3.0 kgfcm/cm kgfcm/cm 49 29 J/m J/m ASTM D638 ASTM D638 ASTM D790 ASTM D785 300 >100 13,000 95 kgf/cm2 % kgf/cm2 R 29 >100 1,270 MPa % MPa Test Method ASTM D1238 ASTM D792 28 0.9 Nominal Values g/10min g/cm3

NOTE
1

ISO 9001, 14001

Physical Properties : these are not to be construed as specifications www.hpc.co.kr

You might also like