Scribd
Upload
15 views1 page

Uf of

This document summarizes an under/over frequency relay. The relay has solid state circuitry, low power consumption, and adjustable time delay. It can operate automatically or manually and provides LED indicators. Frequency thresholds can be set independently from 45-55Hz. The relay trips the main breaker when the line frequency exceeds or falls below the thresholds. It is used to protect generators, captive power plants, and other equipment from under or over frequency conditions.

Uploaded by

Huda Azam
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
15 views1 page

Uf of

This document summarizes an under/over frequency relay. The relay has solid state circuitry, low power consumption, and adjustable time delay. It can operate automatically or manually and provides LED indicators. Frequency thresholds can be set independently from 45-55Hz. The relay trips the main breaker when the line frequency exceeds or falls below the thresholds. It is used to protect generators, captive power plants, and other equipment from under or over frequency conditions.

Uploaded by

Huda Azam
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Under/Over Frequency Relay

Solid state circuitry. Low Power Consumption. Fixed or variable time delay. Auto / manual reset operation. Fail safe system. LED indication for healthy and fault. Accurate, reliable and tropicalized design.

SPECIFICATIONS
System voltage : 415 VAC 50 Hz + 20% Auxillary voltage : 110/230/415 VAC 50 Hz Contacts : 1 c/o contacts (Potential free) fail safe system Contact Rating :5 Amps / 230 VAC / 28 VDC Type : Independent / Combined 1)Under voltage:45-50Hz(steps of 1 HZ) 2)Over voltage : 51-55Hz(steps of 1HZ) Trip time delay: 1-15seconds Mounting : Din / surface

DESCRIPTION
The Under/Over frequency limits are set to requirements with independent dip switches provided on the front panel of the relay. When the line frequency shoots above or falls below the set limit the relay contacts chane over and in turn trip the main breaker. This is a comparator based product.

APPLICATIONS
Protection for generators & captive power plants. Over frequency relay applied as back-up protection to mechanical over-speed devices to avoid damages to primemover. Under frequency relay applied to protect field windings from excessive current or voltage regulator from over load. Servo controlled and invertors Used in monitoring generator or network frequency

You might also like