Thursday

CCNA 2 - Module 9 Exam Answers

1. In which of the following tables does the EIGRP DUAL algorithm store the
primary route to a destination? (Choose two.)
routing
topology

2. On a router running EIGRP, what database would maintain a list of

feasible successors?
topology table

3. Refer to the exhibit. Network 192.168.0.0/28 goes down. What type of

packet does Router2 immediately send to Router1 and Router3?
unicast update packets to 192.168.1.1 and 192.168.2.1

4. What two actions will the EIGRP DUAL FSM take if a link to a network
goes down? (Choose two.)
query neighbors for a new route
search topology table for a feasible successor

<!--[if !supportLineBreakNewLine]--> <!--[endif]-->

5. In the command router eigrp 20, what is the purpose of the number 20?
identifies the autonomous system number this EIGRP process will
advertise

6. Refer to the exhibit. This is the debug output from 2 directly connected
EIGRP routers. They are not forming an adjacency. What is the cause?
network 192.168.1.64 0.0.0.3
7. Refer to the exhibit. Based on the output of show ip eigrp neighbors, what
are two possible problems with adjacencies between Router1 and Router2?
(Choose two.)
The routers are configured with different EIGRP process IDs.
The serial interfaces for both routers are in different networks.

8. By default, which two metrics are used by EIGRP to determine the best
path between networks?
delay
bandwidth

9. What information is maintained in the EIGRP topology database for a

destination route? (Choose three.)
the routing protocol
the feasible distance of the route
the route cost as advertised by the neighboring router

10. Which of the following statements describes the bounded updates used
by EIGRP?
Partial updates are sent only to routers that need the information.

11. Refer to the exhibit. What is indicated by the P at the beginning of the
topology entry?
the route is in a stable state

12. Which of the following types of routes will be denoted by EX in EIGRP

routing table entries? (Choose two.)
routes learned from other routing protocols
EIGRP routes that originate in different autonomous systems

13. Host 192.168.1.66 in the network illustrated is unable to ping host

192.168.1.130. How must EIGRP be configured to enable connectivity
between the two hosts? (Choose two.)
R1(config-router)# no auto-summary
R2(config-router)# no auto-summary

14. Which two statements describe characteristics of EIGRP? (Choose two.)

EIGRP is a distance vector routing protocol.
EIGRP supports classless routing and VLSM.

15. Refer to the exhibit. In the topology table, what do the numbers
3011840 and 3128695 represent?
the total metric for that network as advertised by the EIGRP
neighbor

16. Refer to the exhibit. EIGRP is the only routing protocol enabled on this
network. No static routes are configured on this router. What can be
concluded about network 198.18.1.0/24 from the exhibited output?
Packets that are destined for 198.18.1.0/24 will be forwarded to
198.18.10.6.

17. Refer to the exhibit. All interfaces have been configured with the
bandwidths that are shown in the exhibit. Assuming that all routers are
using a default configuration of EIGRP as their routing protocol, what path
will packets take from the 172.16.1.0/16 network to the 192.168.200.0/24
network?
A,B,E

<!--[if !supportLineBreakNewLine]--> <!--[endif]-->

18. What administrative distance would a router assign to a default route in

EIGRP that is learned from a source external to the autonomous system?
170

19. Refer to the exhibit. The company is using EIGRP with an autonomous
system number of 10. Pings between hosts on networks that are connected
to router A and those that are connected to router B are successful.
However, users on the 192.168.3.0 network are unable to reach users on
the 192.168.1.32 network. What is the most likely cause of this problem?
The routers are not configured in the same EIGRP routing domain.

20. The show ip eigrp topology command output on a router displays a

successor route and a feasible successor route to network 192.168.1.0/24.
In order to reduce processor utilization, what does EIGRP do when the
primary route to this network fails?
The backup route to network 192.168.1.0/24 is installed in the
routing table.

<!--[if !supportLineBreakNewLine]--> <!--[endif]-->

21. Which term defines a collection of networks under the administrative control of a single
entity that presents a common routing policy to the Internet?
autonomous system
Posted by ccna4exam at 7:37 AM 0 comments
Labels: CCNA, CCNA 2 - Module 9 Exam Answers, CCNA 2, Cisco

CCNA 2 - Module 8 Exam Answers

1.Refer to the exhibit. How many routes in this output qualify for use as ultimate routes?
7
<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->

2.The following entry is displayed in the routing table:

R 192.168.8.0/24 [120/2] via 192.168.4.1, 00:00:26, Serial0/0/1
What type of route is this?
a level 1 ultimate network route

3.Refer to the exhibit. A packet destined for host 128.107.0.5/16 is processed by the JAX router.
After finding the static route in the routing table that matches the destination network for this
packet, what does the router do next?
performs a recursive lookup to find the exit interface used to forward the packet

<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->

4.Refer to the exhibit. What can be determined from this output?

All of the routes listed are network routes.

5.Refer to the exhibit. Router1 is running IOS version 12.2. What will the network administrator
need to do so that packets for unknown child routes of 172.16.0.0/24 will not be dropped?
do nothing, ip classless is on by default

<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->
6.Refer to the exhibit. Router B receives a packet with a destination address of 10.16.1.97. What
will router B do?
use the default route

<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->

7.Refer to the exhibit. What parent network will automatically be included in the routing table
when the three subnets are configured on Router1?
172.16.0.0/16

8.Refer to the exhibit. Which statement correctly describes this network?

There is at least one parent and one child route
<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->

9.Refer to the exhibit. Router1 has been issued the ip classless command. What happens to
packets destined to host 172.16.3.10?
forward out interface Serial0/0/1

10.Refer to the exhibit. The network administrator has discovered that packets destined for
servers on the 172.16.254.0 network are being dropped by Router2. What command should the
administrator issue to ensure that these packets are sent out the gateway of last resort, Serial
0/0/1?
ip classless
<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->

11.Refer to the exhibit. With the ip classless command issued, what will router R2 do with a
packet destined for host 172.16.4.234?
send packet out Serial 0/0/1
<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->

12.A network is converged and the routing tables are complete. When a packet needs to be
forwarded, what is the first criterion used to determine the best path in the routing table?
the route with the longest address and mask match to the destination

13.What determines if the router implements a classless route lookup process?

Multiple routes with different masks to the same destination are in the routing table.
<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->

14.What occurs when no ip classless is implemented on the router?

The router will assume it has knowledge of all subnets in the network and will not search
beyond child routes for a better match.

<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->

15.Refer to the exhibit. The graphic contains partial contents of the routing table on router E.
Router E is running version 12.3 of the IOS and is configured for default routing behavior.
Router E receives a packet to forward. Which route in the routing table will be searched
first and why?
172.16.0.0/25 because it is the first level 1 route

16.Refer to the exhibit. What protocol was used to distribute the routing information for the
network 172.16.1.4?
RIPv2
<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->

17.A route to a destination network is learned from multiple routing protocols. What is used by a
Cisco router to select the preferred route to the destination that will be installed in the routing
table?
administrative distance

18.Refer to the exhibit. What subnet mask will Router1 apply to child routes of the 172.16.0.0/24
network?
255.255.255.0

19.A router has the following entries in its routing table:

S 192.168.0.0/24 [1/0] via 192.168.128.2
O 192.168.0.0/25 [110/2175] via 172.16.1.1, 00:02:15, FastEthernet0/1
D 192.168.0.0/25 [90/22455] via 172.16.2.2, 00:12:15, Serial0/0/0
R 192.168.0.0/26 [120/2] via 172.16.3.3, 00:00:15, Serial0/0/1
The router receives a packet that is destined for a host with the address 192.168.0.58. Which
route would this router use to forward the packet?
the RIP route