Scribd
Upload
1K views

Student's Project Inventor

The document contains instructions for three Autodesk Inventor student projects. The first project tasks the student with creating and assembling components of a Screw Clamp, including various views and dimensions. The second project tasks the student with creating and assembling components of a Tool Head of Shaping Machine, including various views, a parts list, and dimensions. The third project tasks the student with creating and assembling components of a Radial Engine Subassembly, including various views, dimensions, and a parts list.

Uploaded by

Satish Bollam
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

Student's Project Inventor

The document contains instructions for three Autodesk Inventor student projects. The first project tasks the student with creating and assembling components of a Screw Clamp, including various views and dimensions. The second project tasks the student with creating and assembling components of a Tool Head of Shaping Machine, including various views, a parts list, and dimensions. The third project tasks the student with creating and assembling components of a Radial Engine Subassembly, including various views, dimensions, and a parts list.

Uploaded by

Satish Bollam
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Students Project - Autodesk Inventor

Create the components of the Screw Clamp (Medium Size) and then assemble them as shown in Figure 1 and Figure 2. Figures 3 through Figure 6 displays dimensions of all the components of the Screw Clamp assembly. For missing dimensions, refer to the other components of the assembly.

Figure 1 Screw Clamp assembly

Figure 2 Screw Clamp assembly

For information about Engineering Services offered by CADCIM, visit www.cadcim.com

Students Project 1

Students Projects - Autodesk Inventor

For getting training on high-end CAD/CAM packages, visit www.cadcim.com

Figure 3 Top view of the body

Figure 5 Dimensions of the components

Figure 4 Front view of the body

Figure 6 Dimensions of the components

Students Project 2
Create and assemble all the components of the Tool Head of Shaping Machine shown in Figure 7 and Figure 8. After creating the assembly, generate the following drawing views: 1. 2. 3. 4. Top View Front View Right-side View Isometric View

Add the parts list similar to the one shown in Figure 9. The dimensions of the individual components are shown in Figure 10 through Figure 26.

Students Project - Autodesk Inventor

Figure 7 Assembled view of Tool Head of Shaping Machine

Figure 8 Various components in the assembly

For information about Engineering Services offered by CADCIM, visit www.cadcim.com

Students Projects - Autodesk Inventor

For getting training on high-end CAD/CAM packages, visit www.cadcim.com

Figure 9 Parts list for the assembly

Figure 10 3D view of Vertical Slide

Figure 11 Top view of Vertical Slide

Figure 12 Side view of Vertical Slide

Figure 13 Sectioned front view of Vertical Slide

Students Project - Autodesk Inventor

Figure 14 Front view of Back Plate

Figure 15 Side view of Back Plate

Figure 16 3D view of Back Plate

Figure 17 Dimensions for Tool Holder

Figure 18 Dimensions for Handle

Figure 19 Dimensions for Handle Bar

For information about Engineering Services offered by CADCIM, visit www.cadcim.com

Students Projects - Autodesk Inventor

For getting training on high-end CAD/CAM packages, visit www.cadcim.com

Figure 20 Top view of Swivel Plate

Figure 21 Top view of Drag Plate

Figure 22 Front view of Swivel Plate

Figure 23 Front view of Drag Plate

Figure 24 Dimensions of the components

Figure 25 Dimensions of the components

Students Project - Autodesk Inventor

Figure 26 Dimensions of the components

Students Project 3
Create and assemble all the components of the Radial Engine Subassembly shown in Figure 27 and Figure 28. After creating the assembly, generate the following drawing views of the assembly: 1. 2. 3. 4. Top view. Front view. Left-side view. Isometric view of the front view.

The dimensions of the components of the assembly are shown in Figure 29 through Figure 36. The parts list of the assembly is shown in Figure 37.

For information about Engineering Services offered by CADCIM, visit www.cadcim.com

Students Projects - Autodesk Inventor

For getting training on high-end CAD/CAM packages, visit www.cadcim.com

Figure 27 Assembled view of Radial Engine Subassembly

Figure 28 Exploded view of Radial Engine Subassembly

Students Project - Autodesk Inventor

Figure 29 Dimensions for Piston

Figure 30 Dimensions for Piston

Figure 31 Top view of Master Rod

Figure 33 Top view of Articulated Rod

Figure 32 Front view of Master Rod

Figure 34 Front view of Articulated Rod

For information about Engineering Services offered by CADCIM, visit www.cadcim.com

10

Students Projects - Autodesk Inventor

For getting training on high-end CAD/CAM packages, visit www.cadcim.com

Figure 35 Dimensions of the components

Figure 36 Dimensions of the components

Figure 37 Parts list of the assembly

You might also like