Scribd
Upload
255 views

How Generate Graphical Reporter

This document provides instructions for generating a graphical report in 15 steps: 1) Import a CAD model and align it in the viewer 2) Measure elements and define nominal values from the CAD data 3) Click the report icon and select the reporter option to open the report dialog box 4) Select the file, format, and status, then add the report to the program text 5) Select report view, name the page, and insert program instructions to define the page

Uploaded by

Joshua Morris
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
255 views

How Generate Graphical Reporter

This document provides instructions for generating a graphical report in 15 steps: 1) Import a CAD model and align it in the viewer 2) Measure elements and define nominal values from the CAD data 3) Click the report icon and select the reporter option to open the report dialog box 4) Select the file, format, and status, then add the report to the program text 5) Select report view, name the page, and insert program instructions to define the page

Uploaded by

Joshua Morris
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

HOW to generate a GRAPHICAL REPORTER

This example its make with the ARCOCAD 3.1 1- Import a CAD data of the part 2- Align the part and sincronize it on the graphical viewer 3- Measure some element (with the definition of the nominal value by the CAD data)

4 Click on this ICON for open the dialog box OPTION

5 Select the ratio button ARCOCAD Reporter for operate witn the new Reporter

6 Conferm with OK

7 Open from the Quick programmer the Input/output page

8 Select the option STANDARD

9 Select to OPEN

10 Select the device FILE

11 Select the format VENDOR

12 On this list box select GRAPHV

13 Select the ADD button 14 Verify if the GRAPHV fomat and the status OPEN appear on the interface 15 Conferm with OK On the Part program area appear the command DISPLY/STOR,V(GRAPHV)

16 Select on Program Text icon

17 Select REPORT VIEW

18 Insert the name of the first report page 19 Select from this list the kind of report , for the test select CAD model landscape.XMLT Inj the part program are write the following instruction: TEXT/VIEWDEF,'FIRST PAGE OF MY REPORT'

20 Conferm with APPLY

21 From the Quick programmer select again the Iput/Output page

22 Select on the Icon Feature Output

23 Select the feature you would like to send to the reporteron the Icon Feature Output

24 Insert here the value of upper and lower tolerance 25 Push Apply to Confirme the elemente and the tolerance.

26 Repeat the Otput for all the elements request on the Graphical Report 27- Exit with Cancel from the REPORT dialog box

28 Select on Quick Programmer the Input/Output page

29 Select the STANDARD Option

30 Select Close All on the Status area 31 Select to ADD on the Report Setting area 32 Verify if is present in this area the command CLOSE ALL 33 Confirm with OK Inside the part program must be write DISPLY/OFF

34 Click on the Reporter ICON

35 On the ARCOCAD interface will appear this Dialog Box 36 Select with the graphical tool the best position of the part inside the CAD area

37 When the position of the part inside the CAD area its fine, push the button ACCEPT VIEW and wait some seconds

38 - The Report will be generate automatically

39 Its possible to print the Report 39 Its possible to save aPDF file

40 Select FILE

41 Select EXIT

42 In this Working Area its possible to modify the position the font and all the other function of the Reporter

42 Click on the product logo for open the following dialog box

43 Click on the preview for see again the report page modify

44 Click on the PDF save

45 Insert the name of the PDF files

46 Click on File

47 Select Exit

48 Click on the product logo for open the following dialog box

49 Click on the SAVE for save the report format on the ARCOCAD project

50 Exit from the Reporter project

51 Your reporter project will be save inside the ARCOCAD project and execute automatically at the end or the part program run.

You might also like