0% found this document useful (0 votes)
121 views4 pages

Teori Dasar (SUDUT 90º) : LF L1 + L2 + Ba - L1 D2 - (R + T) L2 D1 - (R + T) BA Phi. A (R+K.T) /180

The document discusses the theory of 90 degree bends in sheet metal, providing a formula to calculate the total length (LF) which is the sum of the straight lengths (L1 and L2) and the bend allowance (BA). It gives an example calculation for a part with specified dimensions and thickness and shows how to model the bend in Solidworks to verify the manual calculation.

Uploaded by

BANGGA
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
121 views4 pages

Teori Dasar (SUDUT 90º) : LF L1 + L2 + Ba - L1 D2 - (R + T) L2 D1 - (R + T) BA Phi. A (R+K.T) /180

The document discusses the theory of 90 degree bends in sheet metal, providing a formula to calculate the total length (LF) which is the sum of the straight lengths (L1 and L2) and the bend allowance (BA). It gives an example calculation for a part with specified dimensions and thickness and shows how to model the bend in Solidworks to verify the manual calculation.

Uploaded by

BANGGA
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Teori Dasar (SUDUT 90)

LF = L1 + L2 + BA -- > L1 = D2 ( R + T) L2 = D1 (R + T) BA = phi. A (R+K.T)/180 LF= Long Full (Total Length) BA= Length of Bend Allowance phi= 3.14 A= Angle R= Bend Radius K= Neutral Axis Offset _*(K-fACTOR) t/T K = 0.33 Jika R < 2T 0.40 Jika R = 2T s/d 4T 0.50 Jika R > 4T T= Thickness of Material

Contoh Soal:

Perhitungan Manual: Dik: T= 0.8 mm L1

R = 1.2 mm maka K= 0.33

L2

BA

= D2 ( R + T) = 60 ( 1.2 + 0.8) = 58 mm = D1 (R + T) = 40 (1.2 + 0.8) = 38 mm = phi. A (R+K.T)/180 = phi. 90 (1.2 + 0.33 * 0.8) / 180 = 2.3 mm

Jadi LF = L1 + L2 + BA = 58 + 38 +2.3 = 98.3 mm Jika diambil garis tengah

L1 = 58 + *2.3 = 59.15 mm L2 = 38 + *2.3 = 39.15 mm

Perhitungan Di Solidworks Buat sketch

Klik Sheet Metal > Base Flange/Tab, masukkan data sesuai parameter

3.

Klik Flatten, untuk menunjukkan bentangan

Klik Tool > Measure, untuk mengukur dimensi

Kemudian klik garis yg ingin diketahui ukurannya

You might also like