Workshop Equipment Jacks

Hydraulic car jack

model HWH KS
PROLINE
Lifting loads from 2 t up to 30 t
For lifting vehicles on one side (the lifted load must be se-
cured mechanically with supporting stands, for example).

Features
• Versions with hydraulic piston and mechanical spindle
drive or with 2 hydraulic pistons.
• With carrying bracket from load capacity 20 t.
• Extremely low design with model HWH 2K/D
(incl. 1 pressure section for lift extension).
• With integrated pressure control valve for a longer
service life of the jack.
• Integrated seat valve for controlled lowering of the load.

476
Workshop Equipment Jacks

Technical data model HWH KS PROLINE 2 pistons

Model Art.-No. Capacity Weight

kg kg
HWH 2K 3,0 032301016 3000 4.87
HWH 2K 5,0 032304001 5000 6.3
HWH 2KS 10,0 032304002 10000 8.8
HWH 2KS 12,0 032307014 12000 11.0
HWH 2K NB 10,0** 032306034 10000 7.9
HWH 2K/D 10,0* 032304003 10000 6.5
*with replaceable pressure section (height 45 mm)
**horizontal pump unit

Dimensions model HWH KS PROLINE 2 pistons

Model HWH 2K HWH 2K HWH 2KS HWH 2KS HWH 2K NB HWH 2K/D
3,0 5,0 10,0 12,0 10,0** 10,0*
H min., mm 185 215 200 230 175 120
H max., mm 400 520 530 570 385 230
h1, mm 110 145 130 130 104 54
h2, mm 105 160 132 125 106 56
hTr, mm – – 68 85 – –
Ø k, mm 60 x 35 43 40 48 43 38
I, mm 115 134 116 53 136 112
m, mm 80 90 116 133 116 116
Tr, mm – – 32 x 5 40 x 6 – –
Ø z1, mm 32 39 52.58 61.5 52.5 52.5
Ø z2, mm 23 29 39.5 48.5 39.5 39.5
*with replaceable pressure section (height 45 mm)
**horizontal pump unit

Technical data model HWH KS PROLINE piston/spindle

Model Art.-No. Capacity Weight

kg kg
HWH KS 2,0 032300002 2000 2.9
HWH KS 3,5 032302004 3500 2.9
HWH KS 5,0 032303000 5000 3.9
HWH KS 8,0 032305003 8000 5.7
HWH KS 10,0 032306026 10000 5.7
HWH KS 12,0 032307006 12000 7.1
HWH KS 15,0 032308002 15000 8.3
HWH KS 20,0 032309009 20000 10.7
HWH KS 25,0 032310007 25000 13.1
HWH KS 30,0 032311003 30000 14.5

Dimensions model HWH KS PROLINE piston/spindle

Model HWH KS HWH KS HWH KS HWH KS HWH KS HWH KS HWH KS HWH KS HWH KS HWH KS
2,0 3,5 5,0 8,0 10,0 12,0 15,0 20,0 25,0 30,0
H min., mm 170 170 212 220 220 230 230 240 240 240
H max., mm 377 377 462 480 480 497 495 505 515 482
h1, mm 115 115 150 150 150 157 155 155 157 142
hTr, mm 92 92 100 110 110 110 110 110 118 100
Ø k, mm 28 28 40 48 48 48 60 60 65 65
I, mm 113 113 113 116 116 116 116 116 120 116
m, mm 58 58 65 80 80 90 95 116 133 133
Tr, mm 20 x 4 20 x 4 24 x 5 32 x 5 32 x 5 35 x 6 40 x 6 45 x 6 48 x 6.35 48 x 6.35
Ø z1, mm 24.9 24.9 29.9 39.5 39.5 43.5 48.5 54.5 59.5 61.5

477
 Workshop Equipment Jacks

Universal jacks
model JH
Capacity 2 - 50 t
Universal jacks supply high forces for general operations
like lifting, pushing, moving, supporting of all kind of
loads.

Features
• Robust, long life design.
• Pressure relief valve
• Precise controlled lowering.
• Additional screw extension of the piston (up to 20 t).
• Grooved saddle.
• Large base plates for increased stability.
• Model JH-50-2 with two-stage pump.
• Incl. operating lever.

JH-50-2

Technical data model JH

Model EAN-No. Capacity Lift Additional screw Closed height Base plate Pump Weight
4025092* extension
t mm mm mm mm kg
JH-2 A *162722 2 115 50 181 90 x 95 1st stage 2.7
JH-4 A *162739 4 126 60 205 115 x 110 1st stage 3.7
JH-6 A *162746 6 130 75 219 115 x 110 1st stage 4.7
JH-8 A *162753 8 152 70 225 120 x 120 1st stage 5.7
JH-12 A *162760 12 153 80 240 140 x 130 1st stage 8.0
JH-20 A *162777 20 153 80 240 160 x 155 1st stage 11.0
JH-30 *154352 30 180 – 280 210 x 180 1st stage 22.0
JH-50-2 *154376 50 178 – 305 255 x 190 2nd stage 53.0

478
Workshop Equipment Jacks

Machine jack
model MH
For lifting heavy machinery and other loads.

Features
• Can be used in every position.
• Lifting by means of a hand pump.
• Lowering by means of a precision lowering valve.
• With carrying handle for models MH 50 and MH 100.
• With carriage for model MH 250.
• Pressure control valve for a longer service life
of the jack.
• Integrated lifting limitation.
• Low application height of the claw.
• Slewing claw (models MH 50 and MH 100)
• Large base plate for a high level of stability.
• Stable construction with hard-chromium plated
piston rod.

Technical data model MH

Model Art.-No. Capacity Lift Application height Application height Pump lever force Weight
min. with claw min. with head with full load
kg mm mm mm daN kg
MH 50 040014771 5000 205 ≤ 25 ≤ 368 38 25
MH 100 040014772 10000 230 ≤ 25 ≤ 420 40 35
MH 250 040014773 25000 215 ≤ 58 ≤ 505 40 109

Dimensions model MH

Model MH 50 MH 100 MH 250

A, mm 393 449 –
B, mm 320 325 459
C, mm 213 205 420
D, mm 115 120 220
E, mm 53 55 90
G, mm 25 30 58
H, mm 368 420 505
H1, mm 573 650 720
H2, mm 205 230 215
J, mm 77 74.5 142.5
K, mm 93 108 175
L, mm 520 520 920/840
M, mm 740 745 1305/1225
N, mm 140 170 210/283
Ø Z, mm 76 91 155

479
 Workshop Equipment Workshop presses

Workshop press
with hydraulic hand pump
model HWPHP
Pressing power 15 - 50 t
Suitable for pressing bearings and bushes in and out,
pressing and bending components, for straightening
shafts and alignment work.

Features
• Versions for 15 t and 20 t with supporting plate, prism
set and centering device (accessories optional for
higher tonnages).
• Fitted with 2-level hand pump.
• With manometer as standard.
• With hand cable winch for table adjustment
(from model HWPHP 30).

Technical data model HWPHP

Model HWPHP 15 HWPHP 20 HWPHP 30 HWPHP 40 HWPHP 50

Art.-No. 040012730 040012731 040012732 040012733 040012734
Pressing power, t 15 20 30 40 50
Operating pressure, bar 240 320 250 330 330
Lifting height, mm 190 190 190 190 190
Total height A, mm 1870 1870 1920 2010 2030
Total depth B, mm 500 500 600 780 850
Total width C, mm 940 940 1260 1335 1350
Clear working width D, mm 550 550 700 775 775
Clear working height E, mm 940 940 1000 1125 1155
Table width F, mm 185 185 245 258 304
Weight, kg 160 160 250 310 420
Intended use: A workshop press/straightening press is a press with a slow closing speed of 10 mm/sec.
and a maximum pressing capacity of 10 full load/full lift presses per hour.

480
Workshop Equipment Workshop presses & Accessories

Accessories for workshop presses

with hydraulic hand pump
model HWPHP

Technical data model HWPHP Accessories - Supporting plate

Art.-No. suitable for Length Width Bore hole

workshop press diameter
mm mm mm
– 15/20 t* 240 200 20/25/35
040005478 30/40 t 265 200 20/25/35
040005479 50 t 350 300 20/25/35
040005480 100 t 420 300 20/25/35
*included in scope of delivery

Technical data model HWPHP Accessories - Prism set

Art.-No. suitable for Length Width

workshop press mm mm
– 15/20 t* 195 110
040005482 30/40 t 265 140
040005483 50 t 300 160
040005484 100 t 425 240
*included in scope of delivery

Technical data model HWPHP Accessories - Centering device

Art.-No. suitable for Length

workshop press mm
– 15/20 t* 650
040005485 30 t 650
040005486 40/50 t 900
040005487 100 t 1200
*included in scope of delivery

Technical data model HWPHP Accessories - Pressing pin set

Art.-No. suitable for Version Diameter

workshop press mm
040005488 15 - 40 t 6-part 12, 14, 16, 18, 20, 22
040005489 15 - 40 t 8-part 12, 14, 16, 18, 20, 22, 25, 30

481
 Workshop Equipment Service jacks

Hydraulic service jack

model HRH P
PROLINE
For lifting vehicles on one side (the lifted load must be se-
cured mechanically with supporting stands, for example)
and for lifting vehicles with a small ground clearance.

Features
• Quick-lift function as standard
• Controlling, lifting and lowering via the draw bar
• Integrated pressure control valve for a longer service
life of the jack.

Technical data model HRH P PROLINE

Model Art.-No. Quick lift Capacity Height min. Height max. Dimensions max Weight
LxWxH
kg mm mm mm kg
HRH P 1,5 H 032349002* X 1500 98 800 1095 x 440 x 169 48
HRH P 2,0 032345006 X 2000 80 500 730 x 340 x 160 36
HRH P 2,0 L 032345005 X 2000 90 500 950 x 340 x 126 41
HRH P 3,0 H 032346028* X 3000 130 860 1620 x 460 x 210 88
HRH P 4,0 032346001 X 4000 145 560 1270 x 465 x 200 70
HRH P 6,0 032347016 X 6000 155 570 1395 x 470 x 210 90
HRH P 8,0 H 040016051* X 8000 180 960 1830 x 475 x 350 160
HRH P 10,0 032348004 X 10000 170 670 1700 x 470 x 280 136
HRH P 15,0 032349019 X 15000 200 600 1790 x 475 x 325 162
*Lift-up jack

482
Workshop Equipment Service jacks

Hydraulic service jack

model HRH S
SILVERLINE
For lifting vehicles on one side (the lifted load must be se-
cured mechanically with supporting stands, for example).

Features
• Quick-lift function as standard
(except model HRH S 2,0 K)
• Model HRH S 2,0 K with handy plastic case for ease of
transport.
• Integrated pressure control valve for a longer service
life of the jack.
• Version L – lockable pump lever.

Technical data model HRH S SILVERLINE

Model Art.-No. Quick lift Capacity Height min. Height max. Dimensions max Weight
LxWxH
kg mm mm mm kg
HRH S 2,0 K* 040008530 – 2000 125 385 532 x 220 x 140 12
HRH S 2,0 L* 040008532 X 2000 140 800 1350 x 430 x 190 75
HRH S 2,5 K** 040008531 X 2500 140 440 640 x 240 x 150 20
HRH S 3,0 L* 040008533 X 3000 125 605 1310 x 320 x 185 70
HRH S 5,0 L* 040008534 X 5000 145 560 1420 x 350 x 198 95
*K = short; L = long
**K = with additional lift extension

483
 Workshop Equipment Supporting stand & Hydraulic repair set

Supporting stand
model UB
Lifting loads 1500 - 8000 kg
For mechanical support of lifted loads and for jacking-up
loads which must be held for a long period of time.

Features
• Stamp with 5 height adjustments, locking with pin and
cotter pin.
• High level of stability.

Technical data model UB

Model Art.-No. Capacity Height min. Height max. Lifting height Adjusting range Spread angle Weight
kg mm mm mm mm kg
UB 3F P 1,5 040014700 1500 260 450 190 47.5 3 x 120 4.8
UB 3F P 1,5 H** 040014701 1500 420 750 330 82.5 3 x 120 9.5
UB 3F P 3 040014702 3000 320 530 210 52.5 3 x 120 8.0
UB 3F P 5 040014703 5000 365 590 225 56.5 3 x 120 12.0
UB 3F P 5 N* 040014704 5000 235 340 105 52.5 3 x 120 8.0
UB 3F P 8 040014705 8000 360 590 230 57.5 3 x 120 18.0
UB 3F P 8 H** 040014706 8000 580 950 370 92.5 3 x 120 39.5
*special for low-floor buses
**high version

Hydraulic repair set

model HAW S
Pressing power 4000 and 10000 kg
A useful tool for repairs on car/truck bodies for quick
planishing, spreading and pressing with high loads.

Features
• Available in two versions for 4 t and 10 t.
• All parts are packed in a stable plastic case.

Technical data model HAW

Model Art.-No. Pressing Cylinder Weight

power stroke
kg mm kg
HAW S 4,0 032453025 4000 127 20.5
HAW S 10,0 032457050 10000 152 34.5

484
Workshop Equipment Workshop cranes

Hydraulic workshop crane

model HWK KL S
SILVERLINE
Capacity 500 and 1000 kg
For fitting and removing engines and for loading
and unloading pallets.

Features
• With slewing hydraulic system and
sensitive lowering valve, as standard.
• With folding device for space-saving
storage of the crane.
• Chassis variants: V-shaped or parallel.
• With speed increasing ratio

Technical data model HWK KL S SILVERLINE

Model HWK KLS 0,5 HWK KLS 0,5 HWK KLS 1,0 HWK KLS 1,0
Art.-No. 040008514 040008515 040008516 040008517
Chassis form II V II V
Capacity with crane arm length A1, kg/mm 500/1130 500/1130 1000/1130 1000/1130
Capacity with crane arm length A2, kg/mm 400/1230 400/1230 800/1230 800/1230
Capacity with crane arm length A3, kg/mm 350/1330 350/1330 700/1330 700/1330
Capacity with crane arm length A4, kg/mm 250/1430 250/1430 500/1430 500/1430
Hook height at max. outermost position B, mm 2200 2200 2200 2200
Hook height at max. innermost position C, mm 2080 2080 2080 2080
Hook height at max. outermost position E, mm 770 770 770 770
Hook height at max. innermost position D, mm 940 940 940 940
Lifting height per pump stroke with/without load, mm 20/80 20/80 20/80 20/80
Operating pressure, bar 150 150 290 290
Hand effort at WLL, daN 16 16 32 32
Drive-through height G, mm 1680 1680 1680 1680
Underclearance height M, mm 160 160 160 160
Chassis length, total H, mm 1820 1820 1820 1820
Chassis width, inside/outside I/J, mm 990/850 990/850 990/850 990/850
Weight, kg 138 132 156 150

485