Scribd
Upload
539 views

WWW - Hobby Hour - Com Electronics Resistorcalculator - PHP

Resistor color code calculator will display the value, the tolerance and perform a simple check to verify if the calculated resistance matches one of the EIA standard values. Select the first 3 or 4 bands for 20%, 10% or 5% resistors and all 5 bands for precision (2% or less), 5-band resistors. If you want to find out the color bands for a value, use the tool on the left. Enter the value, select the multiplier (, k or M), the desired precision and hit

Uploaded by

Antonio Tomba Chavez Somoza
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
539 views

WWW - Hobby Hour - Com Electronics Resistorcalculator - PHP

Resistor color code calculator will display the value, the tolerance and perform a simple check to verify if the calculated resistance matches one of the EIA standard values. Select the first 3 or 4 bands for 20%, 10% or 5% resistors and all 5 bands for precision (2% or less), 5-band resistors. If you want to find out the color bands for a value, use the tool on the left. Enter the value, select the multiplier (, k or M), the desired precision and hit

Uploaded by

Antonio Tomba Chavez Somoza
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Electronics Sitemap Home

Ho b b y Elec t r o nic s Res is t o r c o lo r c o d es SMD r es is t o r c alc ulat o r T es t ing s emic o nd uc t o r s LED r es is t o r c alc ulat o r Ho b b y p r o jec t s Met al d et ec t o r s Wir eles s mic r o p ho ne Po wer aud io amp lif ier s Ho b b y elec t r o nic kit s Dig it al and analo g mult imet er s

Resistor color code calculator


2.7
1. ba nd Se le c t b and s 4 and 5 band resistor color code calculator 2. ba nd 3. ba nd

5% (4 bands)
Displa y re sistor

2.7 5%

The calculator above will display the value, the tolerance and performs a simple check to verify if the calculated resistance matches one of the EIA standard values. Select the first 3 or 4 bands for 20%, 10% or 5% resistors and all 5 bands for precision (2% or less), 5-band resistors. Hover above the tolerance for min. and max. range values. If you want to find out the color bands for a value, use the tool on the left. Enter the value, select the multiplier (, K or M), the desired precision and hit 'Display resistor' or ENTER. You can also type in resistor values in shorthand notation like 1k5, 4M7 or 100R.

Capacit ance, Impedance &


Inductance in Laminated Bus Assemblies
www.s to rmc o p p e r.c o m

Red, violet, gold, gold.


St a nda rd 5% ( E24 ) value.

PDFmyURL.com

Digi- Key
Distributo r o f Quality Electro nic Pro ducts. Order fro m Digi-Key .
www.d ig ike y.c o m

Int roducing Nexus 7


The 7" tablet that brings yo u the best o f Go o gle. Preo rder no w
p lay.g o o g le .c o m/s to re /d e vic e s /

nikkohm resist ors


po wer resisto r, precisio n resisto r micro wave co mpo nents
www.nikko hm.c o m

Standard EIA Decade Resistor Values:


E6 series: (20% tolerance) 10, 15, 22, 33, 47, 68 E12 series: (10% tolerance) 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, 82 E24 series: (5% tolerance) 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, 91 E4 8 series: (2% tolerance) 100, 105, 110, 115, 121, 127, 133, 140, 147, 154, 162, 169, 178, 187, 196, 205, 215, 226, 237, 249, 261, 274, 287, 301, 316, 332, 348, 365, 383, 402, 422, 442, 464, 487, 511, 536, 562, 590, 619, 649, 681, 715, 750, 787, 825, 866, 909, 953 E96 series: (1% tolerance) 100, 102, 105, 107, 110, 113, 154, 158, 162, 165, 169, 174, 237, 243, 249, 255, 261, 267, 365, 374, 383, 392, 402, 412, 562, 576, 590, 604, 619, 634, 866, 887, 909, 931, 959, 976 115, 178, 274, 422, 649, 118, 182, 280, 432, 665, 121, 187, 287, 442, 681, 124, 191, 294, 453, 698, 127, 196, 301, 464, 715, 130, 200, 309, 475, 732, 133, 205, 316, 487, 750, 137, 210, 324, 491, 768, 140, 215, 332, 511, 787, 143, 221, 340, 523, 806, 147, 226, 348, 536, 825, 150, 232, 357, 549, 845,

PDFmyURL.com

E192 series: (0.5, 0.25, 0.1 and 0.05% tolerance) 100, 101, 102, 104, 105, 106, 107, 109, 110, 111, 113, 124, 126, 127, 129, 130, 132, 133, 135, 137, 138, 140, 154, 156, 158, 160, 162, 164, 165, 167, 169, 172, 174, 191, 193, 196, 198, 200, 203, 205, 208, 210, 213, 215, 237, 240, 243, 246, 249, 252, 255, 258, 261, 264, 267, 294, 298, 301, 305, 309, 312, 316, 320, 324, 328, 332, 365, 370, 374, 379, 383, 388, 392, 397, 402, 407, 412, 453, 459, 464, 470, 475, 481, 487, 493, 499, 505, 511, 562, 569, 576, 583, 590, 597, 604, 612, 619, 626, 634, 698, 706, 715, 723, 732, 741, 750, 759, 768, 777, 787, 866, 876, 887, 898, 909, 920, 931, 942, 953, 965, 976,

114, 142, 176, 218, 271, 336, 417, 517, 642, 796, 988

115, 143, 178, 221, 274, 340, 422, 523, 649, 806,

117, 145, 180, 223, 277, 344, 427, 530, 657, 816,

118, 147, 182, 226, 280, 348, 432, 536, 665, 825,

120, 149, 184, 229, 284, 352, 437, 542, 673, 835,

121, 150, 187, 232, 287, 357, 442, 549, 681, 845,

123, 152, 189, 234, 291, 361, 448, 556, 690, 856,

FAQs
I have a 6-band resistor. How can I calculate its value?
Ent er t he first five colors. Resistors with 6 bands are basically 5-band resistors with an additional ring indicating the reliability or the temperature coefficient .

The resistor has only 3 bands


You don't have t o ent er t he 4 t h band, as 20% resistors don't have a tolerance ring. They will be calculated using the 4 band rule (digit, digit, multiplier). Examples: Red, red, brown is a 220 ohm, 20% resistor Brown, black, orange is a 10k, 20% resistor

Which band is the first?


The short answer: you'll know that from experience! But there are some rules you can follow: 1.) Some resistors have the color bands grouped t oget her and/or close to one end. Hold the resistor with the closely grouped bands to your left and read t he resist or from t he left t o t he right . 2.) With 5% and 10% resistors the procedure is simple: hold the resistor with the silver or gold band t o t he right and read t he resist or from t he left t o t he right . 3.) T he first band can't be silver or gold, so if you hold such a resistor you'll know instantly where to start. Also, the 3rd color for 4-band resistors will be blue (10 6 ) or less and the 4th color for 5 band resistors will be green (10 5) or less, as basic resistor values range from 0.1 Ohm to 10 Mohms.
PDFmyURL.com

What happens, if I start reading from the wrong end?


You should always attempt to work out the value, then check your result against a resist or value chart to see if it's listed there. If it isn't, then try reading it again starting from the other end and check again. This is a necessary step especially with five and six banded metal film resistors. Our color code calculat or runs this check automatically for you, and if the result is not a standard value, it will display a small tip. The warnings are there for your information only and do not always imply that the resistor is was read the wrong way -- see the notes below.

Notes
1.) The resistor color code and the EIA preferred values are internationally accepted standards, but some manufacturers have their own way of doing things. For example, many resistor manufacturers make every single value on the E24 list in 1% and 2% tolerance even though the practice makes little mathematical sense. 2.) Although the program was tested rigorously, it still may have a few bugs. Therefore, when in doubt (and when it's possible) don't hesitate to use your trusted, old friend -- the multimeter -- to double-check the critical components.

Examples
3 bands : Yellow, violet , black --> 47 ohm 20% Orange, orange, brown --> 330 ohm 20% Brown, black, red --> 1k 20% 4 bands : Green, blue, red, gold --> 5.6kohm 5% Red, yellow, orange, gold --> 24kohm 5% Blue, gray, yellow, silver --> 680k 10% More 4 band resistor color code examples: E12 and E24 series. 5 bands :
PDFmyURL.com

Red, yellow, orange, black, brown --> 243 ohms, 1% precision 5-band resistor Yellow, violet , gold, gold, yellow --> 4.7 ohms, 5% - this resistor is calculated with the 4band rule (the yellow band is ignored). Orange, black, black, brown, brown --> 3.00 k ohms, 1% - note: this is a non-standard 1% (E96) resistor, but some manufacturers make every value from the E24 series with 1% tolerance! More: 5 band E48 (2%) series resistor color code examples. 6 bands : Red, red, brown, brown, brown, red --> 2.21k, 1% 50ppm/C Whit e, black, whit e, brown, red, red --> 9.09k, 2% 50ppm/C - do not enter the last band (red in the two examples above)

Hobby Electronics -> Resistor color code table -> Resistor color code calculator
www.ho bby-ho ur.c o m

PDFmyURL.com

You might also like