TOOLS WITH CHARACTER !

Edition 2008

Visible and tangible quality!

PROXXON precision electrical tools are made for those who work and enjoy miniature and engineering tools. We specialise in manufacturing high-quality tools offered at reasonable prices. All machines and tools produced have been individually tested, item by item. Our aim is to sell products of the highest quality. We take great pride in our product and technical knowledge. If you wish to order spare parts or require further information please

e-mail call visit

[email protected] +49 - 6575 - 78-0 www. proxxon.com

Page/Pages

Handheld tools 230V

3 11

Handheld tools 12V and mains adaptors

12 17

Accessories for handheld tools (drill stand, flexishaft, etc.)

16 / 18 19

Other precision tools and equipment for delicate work

20 21

Bits and cutters of industrial and dental (rotating) quality

22 27

Lightweight bench tools (with equipment-related accessories)

28 35

Middleweight bench tools (with equipment-related accessories)

36 43

Lathe and milling systems

44 53

Mill/drill system with 43mm-spindle neck

54

Accessories for mill/drill units with 43mm-spindle neck

55

Professional literature for model builders

11

The tools depicted in the contents represent the variety of PROXXON tools.
2

Multiversatile equipment for delicate projects. Precise and quiet. With quick change chuck for 0.3 3.2mm shanks.

Precision drill/grinder FBS 240/E Strength lies in calm!

For drilling, milling, grinding, polishing, cleaning, carving and engraving. The maximum speed of 20,000rpm is continuously variable down to 5,000rpm. The full wave electronic speed control results in virtually constant torque, even at lower speeds, in turn facilitating micro drilling, cleaning and polishing. The spindle runs in a precision ball bearing and is lifted with a lock button. The 20mm collar fits MICROMOT drill stands and vices. The machine is fitted with a special, balanced, low noise DC motor with high life expectancy. Stable housing of glass-fibre reinforced POLYAMIDE with soft components in the finger grip area. Complete with 43 quality inserts in a sturdy plastic case. Technical data: 5,000 20,000rpm. Maximum power consumption 100W, 220 - 240V. Length 200mm. Weight 450g. Insulated according to class 2 requirements. Keyless chuck with 0.3 3.2mm capacity. NO 28 472

Stable housing of glass-fibre reinforced POLYAMIDE with soft components in the finger grip area.

Note: The FBS 240/E may also be fitted with the optional MICROMOT steel collets (see page 22).

Complete with 43 high-quality bits and cutters in a durable polypropylene case.

Precision electrical tools. Genuine single handed use. Elektro-Feinwerkzeuge. Echte Einhandgerte. Mit GehuseWith die-cast aluminium Leise, Quiet, und effizient! kopf aus Alu-Druckguss. heads.prziseprecise and efficient!

Professional drill/grinder IB/E

For drilling, milling, grinding, polishing, cleaning, cutting, carving, engraving and signing. For precision mechanics, model builders, jewellers, opticians, artists and electronic enthusiasts.

Ball bearing spindle of ground steel with lock button for rapid cutter changing.

Quiet, powerful 100W motor with full wave electronics for speeds between 5,000 and 20,000rpm.

Streamlined head of die-cast aluminium for exact bearing seats and optimal stability.

Quality without compromise: isolation according to class 2 requirements.

With 34 bits and cutters of industrial quality, all shafts 2.35mm. Complete with six triple slit steel collets covering 1.0 to 3.2mm (see page 22).

High concentric accuracy (maximum runout 3/100mm). No runout in your bits and cutters.
This high-revving, special balanced, low noise DC motor has full-wave electronic speed control. The ground steel spindle runs in a ball bearing. Six high concentricity MICROMOT collets, (1.0 1.5 2.0 2.4 3.0 and 3.2mm and closure nut) are included. Technical data : Speed 5,000 to 20,000rpm. Power consumption (max) 100W, 220 240V. Stable head of die-cast aluminium and main housing of glass-fibre reinforced POLYAMIDE. Length 230mm. Weight approx. 500g. Insulated to class 2. The 20mm MICROMOT collar allows fitting of optional drill stands, horizontal stands, etc. Supplied with 34 bits and cutters in a stable plastic case. NO 28 481

Note:
MICROMOT steel collets are hardened and thus have a high, consistent flexibility. 1 They also maintain prolonged accuracy, even after regular use (these collets should not be compared with unhardened, four-slit collets of brass and aluminium). The triple slit collet is substan1 tially more difficult to manufacture than the fourslit type, 2 but offers a better load-bearing 2 3 surface. 3 This is especially important for cutters with small shaft diameters. Also see page 22.

Note:The equipment offered is supplied in a new storage case made from highgrade polypropylene. It is attractive, extremely stable and sufficiently large to enable the machine to be replaced in it after completion of the work without fiddly refitting. A clear label on the side identifies the contents.

Problem solution: unit with long and slender spindle neck for working in tough-to-reach areas (also in hollow objects).

Long neck angle milling/drilling unit WB 220/E

With a set of gears running on several ball bearings in a stable, die-cast aluminium housing head. Also suitable for right-angled separation of rods. With a special balanced, powerful, quiet and long-lasting DC motor. Infinitely variable rpm (full wave electronics). Main housing is made of glass-fibre reinforced POLYAMIDE. Safely stored in an attractive and extremely stable case made from high-grade polypropylene, as described on the left.

With MICROMOT hardened steel collets (1.0 1.5 2.0 2.4 3.0 and 3.2mm). Technical data: 220 - 240V. 100W. 3,000 - 15,000rpm. Length 270mm. Weight 550g. Insulated to class 2. NO 28 492

Long neck straight drill/grinder LB/E

Head of die-cast aluminium with 100mm long spindle neck (and 20mm MICROMOT collar). Ideal for internal grinding and the use in slots and channels. Special balanced, powerful, quiet and long-lasting DC motor. Variable (full wave) electronic speed control; main housing of glass-fibre reinforced POLYAMIDE. MICROMOT collets (1.0 1.5 2.0 2.4 3.0 and 3.2mm). Well presented in a plastic case.

Safely stored in an attractive and extremely stable case made from high-grade polypropylene, as described on the left. Technical data: 220 240V 100W. 5,000 20,000/min.Length 300mm. Weight 630g. Insulated to class 2. NO 28 485

Pocket drilling machine COLT 2

Tough and durable special balanced, powerful, quiet and long-lasting DC motor. Quiet planetary gear gearbox of die-cast aluminium (main housing made of glass-fibre reinforced POLYAMIDE). Handy switch with integrated electronic speed control and lock. The RHM chuck allows the precision removal of the inserts. Safely stored in an attractive and extremely stable case made from high-grade polypropylene, as described on the left. Technical data: 220 240V. 100W. 0 3,000rpm. RHM chuck capacity 0.5 6mm. Capacity in steel 5mm. Length 225mm. Weight 900g. Insulated to class 2. NO 28 490
5

The long, slim head of die-cast aluminium makes the LWS ideal in numerous applications, even parting.

Long neck angle grinder LWS

For working steel, non-ferrous metals, glass, ceramics, wood and plastic. For cutting, rough-machining, grinding, precision polishing, fine polishing and carving wood. Special balanced, powerful, quiet and long-lasting DC motor. Stable head mad of glass-fibre reinforced POLYAMIDE. A corundum grinding disc (grit 60), a fan sanding disc (grit 100) and a reinforced cutting disc are included. Safely stored in an attractive and extremely stable case made from polypropylene.

Technical data: 220 240V. 100W. 13,000rpm. Disc diameter 50mm with 10mm interval. Length 270mm. Weight 550g. Run down time less than 1 second. Insulated to class 2.

NO 28 547

Backing disc for LWS Self-adhesive type, for use with corundum bound sanding discs and san-ding fleece. 50mm. NO 28 548 1 piece

Corundum grinding disc for LWS Used for de-burring, grinding, sharpening and de-rusting steel and non-ferrous metals. 50mm. NO 28 585 60 grit NO 28 586 36 grit Silicon carbide grinding discs for LWS Used on hard materials such as glass, stone, ceramics and even hardened steel. 50mm NO 28 587 60 grit Corundum fan sander for LWS For grinding tempe-red cast iron, cast iron, stainless steel, non-ferrous metals, wood and plastic. Low wear-resistant. 50mm. NO 28 590 100 grit NO 28 591 150 grit Corundum bound cutting disc for LWS With woven reinforcement,50 x 1 x 10mm. For cutting steel, non-ferrous metals, plastic and wood. 50mm. NO 28 154

Corundum sanding discs for LWS Self-adhesive type, used on flat and convex surfaces. 50mm. NO 28 549 80 grit 12 pieces NO 28 550 120 grit 12 pieces NO 28 551 180 grit 12 pieces NO 28 552 240 grit 12 pieces Sanding fleece for LWS Self-adhesive type, used for cleaning, matting and sanding of steel, stainless steel and non-ferrous metals. Also used for paint removal. 50mm. NO 28 554 medium 5 piece NO 28 555 fine 5 piece

Rasp plate with metal burrs made from wolfram carbide for LWS EW

For model-making, cleaning and smoothing of wood, plastics and glass-fibre reinforced objects. No expenditure of effort is needed, easy and precise handling. Not suitable for metal processing. NO 29 050
6

The equipment offered is supplied in a new storage case made from high-grade polypropylene. It is attractive, extremely stable and sufficiently large to enable the machine to be replaced in it after completion of the work without having to fiddle. A label on the side identifies the contents.

Small, torque resistant, solid and versatile Die-cast aluminium heads for high stability !

Belt sander BSL 220/E

For shape finishing, mortising, fine polishing (flat surfaces). Also for deburring metal, paint removal and fine finishing. Head of die-cast aluminium for high stability and precise ball bearing fitting. Main housing made of glass-fibre reinforced POLYAMIDE. Variable (full wave) electronic speed control. The head rotates through 60. Complete with 2 off 80 and 2 off 180 grit belts. Safely stored in an attractive and extremely stable case made from high-grade polypropylene, as described on the left.
VA 12 VA 12
- 12 VA
- 12 VA

V sdgb d dgfd 12 dgj lg

djfk dlg,d dlfida

Technical data 220 240V. 100W. Belt size 10 x 330mm (usable sanding area 10 x 110mm). Belt speed 300 700rpm. Length 350mm. Weight 650g. Insulated to class 2. NO 28 536

VA 12 VA 12

3 VA dfjd g sgj f

3 VA

kgfjk

V sdgb d dgfdl 12 dgj lg

3 VA dfjd g sgj l f

3 VA

kgfjk

djfk dlg,d dlfida

jd

jd

Replacement belts for BSL 220/E

Corundum on tear-resistant, woven backing. Sands metal, non-ferrous metals, wood and plastics efficiently. 10 x 330mm. NO 28 583 NO 28 582 NO 28 581 80 grit 120 grit 180 grit 5 pieces 5 pieces 5 pieces

The head rotates through 60.

Identical with the foregoing item, but with burrs made from silicon carbide for grinding and de-burring of glass and ceramics. Also suitable for grinding brass, steel and cast iron. NO 28 579 180 grit 5 pieces

Super jig saw SS 230/E

Note: The alternative 12V jig saw STS 12/E is described on page 14.

This unit offers fantastic and precise cutting capacity. Stable head of die-cast zinc for precise fitting. The housing head is made of glass-fibre reinforced POLYAMIDE. Special balanced, low noise DC motor with high life expectancy. The stroke speed is variable by means of full wave electronic speed control. Footplate adjustable up to 45 for mitre cuts. Ideal for tight curves in wood (up to 12mm), PC cards to 5mm and non-ferrous metals to 3mm. Complete with 4 super-cut sawing blades of various pitches for wood, plastic and metal. Safely stored in an attractive and extremely stable case made from high-grade polypropylene, as described on the left. Technical data: 220 240V. 100W. Stroke speed of 2,000 4,500/min. Length 230mm. Weight 700g. Insulated to class 2. NO 28 530

Jig saw blades made of special steel Pitch of 1.06mm, teeth ground and set. Usable on hard and soft woods, plywood, fibreglass reinforced sheets as well as soft plastics. Fits SS 230/E and STS 12/E. NO 28 054 Pack of 2

Jig saw blades made of HSS Tooth pitch of 1.5mm, with teeth set and ground. Usable on metals, nonferrous metals, aluminium and softer alloys, fibreglass, Plexiglass and insulating materials. Fits SS 230/E and STS 12/E. NO 28 056 Pack of 2

Oscillating motion far better than conventional orbital motion. Hence suitable for cutting and precision carving.

Delta sander OZI 220/E

Head of die-cast zinc, ensuring exact and stable housing for the moving parts. Allows precise and stable storage of moving parts. The oscillating motion ensures lack of vibration and kickback and allows the fitting of cutting blades too!

Sanding area 65 x 65 x 65mm with gummed pads allows quick changing. The OZI 220/E and BBS/S are also supplied in a new storage case made from high-grade polypropylene.

Small yet efficient sander! For grinding surfaces in very tight spots, e.g. corners, sides and inaccessible areas. The oscillating motion ensures quiet operation and also facilitates cut-ting. Insert and file! The variable speed facility ensures the correct speed for every material. Special, balanced, low noise DC motor with high life expectancy. Main housing of glass-fibre reinforced POLYAMIDE. Complete with 4 sanding discs (2x 80 grit, 1x 150 grit and 1x 240 grit). In an attractive case, as described on the right. Technical data: 220 240V. 100W. Sanding frequency of 3,000 10,000rpm. Length 230mm. Weight 550g. Insulated to class 2. NO 28 520

Diamond files for OZI

NEW

The OZI cuts in those cases where a rotating saw blade can no longer be used (in this case using the HSS separation blade, see p. 9).

For precision square excavations, are now available HSS immersion saw blades with an 8 and 14mm width of cut.

For dulling, de-burring and post-processing of glass, porcelain and ceramics. For grinding and de-burring of hardened and unhardened steel. A radius on one side makes it possible to work at round, recessed spots. Width 25mm. Immersion depth 20mm. NO 28 906 120 grit NO 28 907 180 grit

HSS immersion saw blades for OZI

For exact square excavations and other forms. For making hatchways and windows in ship and aircraft models. Cuts wood, plywood, plastics and aluminium. Max. immersion depth 16mm. NO 28 897 Saw blade width 8mm NO 28 898 Saw blade width 14mm
8

NEW

Compact, light and well balanced. Now with an extra powerful drive for a high material removal capacity.
Sanding pads for OZI 220/E

Belt sander BBS/S

NEW
High durability corundum (aluminium oxide) pads. Grain fil-led with special filler to prevent premature clogging. Deposited on special backing paper. Self-adhesive. Standard packing NO 28 880 80 grit 5 pieces NO 28 882 150 grit 5 pieces NO 28 886 240 grit 5 pieces Bulck packing NO 28 891 80 grit NO 28 893 150 grit NO 28 895 240 grit 25 pieces 25 pieces 25 pieces

HSS cutting blade for OZI

Oscillates, making it ideal for cutting metal, wood, PC cards, plastics, plaster of Paris and many other materials. The segment cut facilitates exact cutting right into corners. NO 28 900 65mm

Powerful special DC motor, quiet and long-lasting. Left-justified band grinder, making it possible to process surfaces right to the corner. Fine adjustment of rollers prevents lateral rolling off. Easy replacement of bands by means of a spring tension system without the use of tools. Housing is made of glass-fibre reinforced POLYAMIDE. Complete with screw clamp and with 5 x 120 grit and 240 grit grinding bands. Supplied in a practical case as described on page 8. Technical data: 220 240V. 150W. Grinding band 40 x 265mm. Grinding surface 60 x 40mm, band speed 160m/min. Length 175mm. Weight 700g. Class 2 insulation.. NO 28 526 The BBS/S is also tionary use. included. intended for staA screw clamp is

Diamond cutting blade for OZI

Operation as described above for the HSS blade. Cuts marble, bricks, dry walling and many other materials. Ideal for interior finishing and sanitary and electrical installation. NO 28 902 65mm

Grinding bands made from high-quality corundum (aluminium oxide)

Mounted on a high-performance support. For the grinding of metal, non-ferrous metals, wood and plastics. 40 x 265mm. NO 28 922 80 grit 5 pieces NO 28 924 120 grit 5 pieces NO 28 926 180 grit 5 pieces NO 28 928 240 grit 5 pieces

MICROMOT tool holder

Flexible spatula made from spring steel for OZI
For stationary use of MICROMOT electrical precision tools with metal head in combination with a vise. Especially suited for industrial drill/grinder IB/E, belt sander BSL 220/E, longneck angle grinder LWS, super jig saw SS 230/E and delta sander OZI 220/E. Made of glass-fibre reinforced POLYAMIDE. Suitable for the removal of paint, adhesive residues (tile adhesive), for digging out old silicone from joints, but also for treating cars (abrasion of tar and underbody protection). 50 x 70mm. NO 28 904
9

NO 28 410

For joiners, model makers and wood carvers. Now with die-cast aluminium gear head.

Motor-driven carving device MOS

NEW

3 Japanese knife inserts made from bimetal are included.

For the carving of all types of wood. For the restoration of furniture. For the restoration of antiques. For linocuts and precision paint removal. It is also possible to process plaster. Special, balanced, low noise DC motor with extreme high life expectancy. Gear hear made of die-cast aluminium. Main housing of glass-fibre reinforced POLYAMIDE. Three high-grade Japanese knife inserts made from bimetal (U-form, V-form ad flat blade) are included. In an attractive and extremely stable case made of high-grade polypropylene.

Technical data: 220 240V. 50W. Stroke speed 10,000rpm. Length 230mm. Weight 680g. Class 2 insulation. NO 28 644

The MOS offered is supplied in a new storage case made from high-grade polypropylene. It is attractive, extremely stable and sufficiently large to enable the machine to be replaced in it after completion of the work without having to fiddle. A label on the side identifies the contents.

Replacement carving knife inserts for MOS

Super-quality of bimetal (made in Japan). One each V-form, large and small roundingoff, flat with a straight and a rounded end. NO 28 572

New for wood processing: insertion tools with wolfram carbide burrs for model-making, cleaning and smoothing of wood and glass fibre reinforced synthetics. Not suitable for metals!
Extremely sharp and easy to handle; material is removed in a controlled manner, without the application of force, working along or against wood grain. High resistance and easy to clean, using a Bunsen burner. Also suitable for rubber, plastic foam and silicone. For working at 5,000- to 20,000rpm. Shafts 3,2mm. NO 29 062 Cone 8,0 x 12mm NO 29 060 Cylinder with round head 7,5 x 12mm NO 29 064 Taper 4,0 x 19mm

Multiform grindstone
For the aforementioned carving blades. Preprofiled. A pure oilstone for knife-sharp cutting.

NEW

NO 28 578

100 x 63 x 15mm

Note: The new wolfram carbide rasp plate is ideal for woodcarvers and as a supplement for a motorised carving machine (material as described earlier) in connection with our LWS long-neck corner grinder. Details on page 6.

10

Small, handy, precise and particularly easy to handle. Main housing of die-cast aluminium.

MICRO router MOF

Lock button for depth. Practical spindle lock button eases bit changing. Parallel and circle jig (with centring pin) of diecast aluminium. Support columns set back to optimise viewing of cut.

Dust collector with a 300mm long suction tube and adaptor for use in combination with a regular vacuum cleaner. We recommend for that purpose our vacuum cleaner controller AS/E (page 33).

Ideal for slotting, rounding over, counter boring and stock removal in wood, plastic, acrylic plastic, MDF, URIOL, ceilings and many more. Powerful universal AC motor. Base housing of die-cast aluminium and face of smooth gliding synthetic material. Main housing of glass-fibre reinforced POLYAMIDE. With MICROMOT collets (1.0 1.5 2.0 2.4 3.0 and 3.2mm). Parallel and circle jig and fitted with a dust collector. Technical data: 220 240V. 130W. Footprint 70 x 100mm.Total height 180mm. Weight 1,400g. Class 2 insulation. NO 28 568

Manual for creative model-makers

Over 280 pages of information and tips from all areas of model building. All illustrations in colour. Attractively produced, this book affords a good insight into the areas of materials and their application possibilities. It describes tools and work techniques in general and gives comprehensive technical explanations concern-ing MICROMOT devices and available accessories. A large portion is devoted to practical tips and a clear appendix of useful tables completes the contents of this helpful manual. German only!

Note: Wood router cutters are offered on page 27.

NO 28 996

11

Precision milling/drilling machines MICROMOT 50 and 50/E. Ball bearing spindle and high-quality collets for efficient insertion of tools.

MICROMOT 50 and 50/E

For milling, drilling, grinding, polishing, brushing, cleaning, de-rusting, cutting, engraving, signing. For working steel, precious metals, glass, ceramics, plastics and precious stones.

12 VOLT
Ideal for electronic hobbyists, model-builders, mechanics, jewellers, opticians, artists, chiropodists, dental technicians, tool and casting makers, etc. 12V supply allows the safe use of coolant (wet grinding and cutting).

Stable housing of glass-fibre reinforced POLYAMIDE. With soft component in the finger grip area for extended use.

The MICROMOT standard 20mm collar allows use in the drill stand MB 140/S, universal holders UHV and UHZ and angle adapter WS 90.

The tens of thousands of these units in use speak for themselves: they are a joy to use!
The diameter of only 35mm makes it easy to handle. The weight of 230g, quietness and effortless drive via the balanced motor with ground spindle and collar bearing all contribute to the ergonomic design. The high-quality MICROMOT steel collets (see page 4) ensure accurate clamping of the cutters, without rattling or thumping of bits and cutters. The size of the machine dictates a 12V drive system, use of a trans-former is thus required. MICROMOT transformers of at least 1.0A are recommended.

Mill/drill unit MICROMOT 50/E

High precision: ball bearing spindle. Special balanced, low noise DC motor with high life expectancy. Variable electronic speed control with feedback effect (high engine power in the lower revolutions area). Housing of glassfibre reinforced POLYAMIDE with soft component in the finger grip area. 20mm-collar for fitting MICROMOT accessories. Six MICROMOT collets (1.0 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm) are supplied. Technical data: Direct voltage 12 - 18V. Power consumption is 40W max. Stroke speed from 5,000 to 20,000rpm. Length 220mm. Weight 230g. NO 28 510

Multiway adapter MF 5 for 12 Volt tools

With mounting holes. Fitted with 150cm spiral cable, 4 MICROMOT sockets and one pair of standard 4mm banana sockets. The LED indicates power availability. NO 28 994

Mill/drill unit MICROMOT 50

As MICROMOT 50/E, except that no electronic speed control is fitted. No load speed is 20,000rpm. NO 28 500

MICROMOT extension cord (12 Volt)

Handy spiral cable with coded plug and socket to prevent polarity reversal. Length 300cm. Not illustrated. NO 28 992

12

The new 50/EF with quick-action chuck. Practical for use with different shaft diameters.

MICROMOT 50/EF
Note: The MICROMOT 50/EF can also be used with MICROMOT steel clamping devices. This is recommended when milling continuously at high lateral pressure. This makes it impossible for the shafts to become loosened after prolonged working. Using clamping devices makes true running better than using the quick-action chuck.
Quick-action chuck of 0.3 3.2mm. Primarily advantageous when working with HSS borers of different power, complying with DIN 338.

12 VOLT

20mm-system adaptation. For flange mounting of MICROMOT accessories.

NEW

Stable housing made of glass-fibre reinforced POLYAMIDE. With a pleasantly soft handle.

Footswitch FS For free-hand precision work .

For all machines with a Euro plug (class 2 insulation) and maximum power absorption of 500W. Ideal for both portable and stationary machines. Housing of glass-fibre reinforced NYLON. The connecting cord (230V) is 250cm in length and the output cord 50cm. The transformer is connected to the FS when using 12V machines. NO 28 700

Slim, easily handled and light. Quick-action chuck and electronic revolutions adjustment, with feedback effect (high engine power in the lower revolutions area). Special, balanced, low noise DC motor with high life expectancy. A transformer is required for operation. We recommend MICROMOT network devices from 1.0A.. Technical data: Direct voltage 12 18V. Power absorption up to 40W. 5,000 20,000/min. Length 220mm. Weight 230g. NO 28 512

Model building and engraving set. Complete with MICROMOT drill/grinder 50/E, mains adapter and 34 bits and cutters of dental quality.
MICROMOT drill/grinder 50/E (as described on the left). The set includes 34 industrial respectively dental quality bits and cutters: 1 diamond grinding bit, 1 fine miller, 0.5 and 1.0mm micro-drills, 1 brass brush, 4 high-grade corundum grinding bits (cylinder, sphere, disc and cone shaped), 1 saw blade, 4 grinding wheels (2 corundum, 2 silicon carbide), 20 cutting discs and 1 arbor. The 6 MICROMOT collets ranging from 1.0 3.2mm (description on page 4) are also included. With mains adaptor for 220 240V operation (12V, 1.0A). NO 28 515

Both sets are packed in an attractive plastic case, with 34 industrial respectively dental quality bits and cutters.
13

Superfine sander with linear (not rotary) sanding motion.

Pensander PS 13
Ideal for working on surfaces in recesses, slots and small corners. Linear (not rotating) stroke. Long-lasting special DC motor. Housing of glass-fibre reinforced POLYAMIDE. Four sanding arbors with straight shanks and four angled (all different shapes) as well as three sheets of pre-profiled self-adhesive sanding pads are included. The sheets are of grits 180, 240 and 400 with 5 of each shape per sheet. Technical data: Direct voltage 12 - 18V. 8,000 linear strokes/min.(2.5mm stroke length). Length 160mm. Weight 130g. NO 28 594 Additional sandpaper for PS 13 Three sheets, each with 20 pads in different shapes. Silicon carbide, selfadhesive. NO 28 822 180 grit NO 28 824 240 grit NO 28 826 400 grit

12 VOLT

Note: A mains adaptor of at least 1.0A at 12-18VDC is required. We recommend PROXXON power supplies NG 2(E) or NG 5/E.

Jig saw STS 12/E

Ideal for curved and intricate sawing of wood (up to 10mm), printed circuit cards (up to 3mm) and non-ferrous metal (up to 2.5mm). Powerful special low noise DC motor with high life expectancy. Variable speed control with feedback effect (high engine power in the lower revolutions area). Housing of glass-fibre reinforced POLYAMIDE.Includes 2 blades (coarse and fine). Can now also be used in combination with a ball adaptor for working convex and concave surfaces. We recommend the use of MICROMOT mains adaptors of at least 2.0A. Technical data: Direct voltage 12 18V. Maximum power absorption 100W. Stroke 6mm (adjustable from 2,000 5,000/min.). Length 180mm. Weight 480g. NO 28 534

Orbital sander SL 12/E

Shaping, rough and fine sanding of flat surfaces and sides. Flat sanding of primers and finish-polishing. Use on 12VDC (safety voltage) and low speeds allow wet sanding! The easy to use paper clamp allows the use of any commercial sand paper (no special curves required). Sanding area 80 x 58mm has no overhanging parts, allowing sanding into corners. Housing of glass-fibre reinforced POLYAMIDE. We recommend the use of MICROMOT mains adaptors of at least 2.0A. Technical data: Direct voltage 12 18V. Maximum power absorption 100W. Stroke 1,000 5,000/min. Height 160mm. Weight 480g. NO 28 542

12 VOLT

Jig saw blades can be found on page 7.

14

Power and precision also when wet grinding. Includes keyless chuck (capacity 0.3 3.2mm).

Precision drill grinder FBS 12/E

For precision drilling, milling, sanding, polishing, brushing, de-rusting, engraving, chiselling and cutting. Includes keyless chuck (capacity 0.3 - 3.2mm). A precision ball bearing minimises spindle side play. Spindle lock button for bit changing obviates the need for spanners. Recessed spindle head for inserting MICROMOT steel collets (see page 4). Special, balanced, low noise DC motor with high life expectancy. Variable speed control with feedback effect (high engine power in the lower revolutions area). Housing of glass fibre-reinforced POLYAMIDE. Technical data: Direct voltage 12 18V. Maximum power consumption 100W. Stroke 3,000 - 15,000rpm. Length 185mm. Weight 450g. We recommended the use of MICROMOT transformers of at least 2.0A (see page 17). NO 28 462 Speed control with feed-back effect for speeds of 3,000 15,000rpm.

12 VOLT
20mm MICROMOT standard collar. Efficient forced ventilation cooling for extended periods of use without power loss.

High-quality DC motor with high torque.

Load balancer FZ 300

Load capacity 300 600g, cord length up to 180cm. Housed in a sheet steel case with plastic outer cover. Weight 400g. Ideal for assembly lines and work benches. NO 28 699

MICRO screwdriver MIS 1

With pre-selectable torques of 0.35 - 2.0Nm. Small, light and easy to handle. An ideally positioned rocker switch provides on/off/reverse. A RHM chuck facilitates acceptance of all bit shanks of up to 6.5mm (also for standard 1/4" bits). Housing of glass fibre-reinforced POLYAMIDE. Complete with 16 inserts of chrome molybdenum steel. Technical data: Direct voltage 12 18V. Maximum power consumption 50W. Torques of 0.35 - 1.0Nm (the sixth stage bypasses the clutch and yields approx. 2Nm). Length 200mm. Weight 415g. We recommend the use of MICROMOT mains adaptors of at least 2.0A. NO 28 690

Slot: 0,3 x 1,5 / 0,35 x 2,0 / 0,4 x 2,5 mm Philips: Siye 0 and 1 Torx: T 6, T 8, T 10 Allen key, internal: 3,0 - 3,5 - 4,0 - 4,5 - 5,0 mm Allen key, external: 1,5 - 2,0 and 2,5 mm

Note:

The MICRO screwdriver MIS 1 is eminently suitable to cut threads!

Note: The bit holder shown here (50 x 76 x 15mm 2 pieces without bits), usable for holding rotating bits with shaft of 2.35 3.0 and 3.2mm is available as No 28 359.
15

The ideal complete starter kit including the tried and tested engraving tool GG 12 !

Complete engraving kit with trial glass

Engraving kit GG12 with special balanced, powerful, quiet and long-lasting DC motor. Housing of glass fibre-reinforced POLYAMIDE. Plus mains adaptor, trial glass, motifs and instruction booklet as well as all necessary bits: 1.0 and 1.8mm diamond grinding bits with spherical head for engraving and line work, silicon carbide grinding bits in both conical and bullet shape for frosting glass as well as one corundum grinding bit in ball and cylinder shape for grinding and engraving. Every component is securely packed in an attractive plastic case. Technical data for GG 12: Direct voltage 12 18V. Length 145mm. Weight 50g. NO 28 635

12 VOLT

Engraving tool GG 12, available individually

Includes 1 diamond bit (spherical head, 1.8mm). NO 28 592

Every piece has its own place in the attractive, extremely stable plastic storage case.

Flexishaft MICROMOT 110/P with triple ball bearings, up to 25,000rpm.

Aluminium precision handheld tool with two steel ball bearings. Ball bearing in the drive shaft end. Highly flexible core (no heating up when bent tightly). For holding steel MICROMOT collets. Length 100cm. The flexishaft comes with 6 steel MICROMOT collets (1.0 1.5 2.0 2.4 3.0 and 3.2mm). The UHV universal holder shown is described on page 19.
16

NO 28 620

MICROMOT mains adaptors: safe and efficient power sources for MICROMOT low-voltage tools.

MICROMOT mains adaptor NG 2/E

Note: Power consumption of portable machine tools is measured according to the internationally accepted ICE-745-1 specification. The current drawn is measured, not the power consumption with a hot motor just before stalling. In practice, this condition seldom appears, if ever. All PROXXON mains adaptors are suitably dimensioned for the recommended purposes. The adaptors do not include the illustrated drills/grinders.

NORYL casing (heat resistant a necessity for transformer enclosures). Polarised socket for MICROMOT plug. Red LED indicates readiness for use. PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down. the mains plug should be disconnected briefly to reset the adaptor. With holes for storing bits. Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready. Variable speed control with feedback effect for adjusting bit speed to suit the job, as well as providing high torque at low speeds.

Technical data: 220 240V. Supplies 2.0A at 16 Volt open circuit and 12 Volt under load. Weight 1,000g. Class 2 insulation. NO 28 707

MICROMOT mains adaptor NG 2/S

Without electronic speed control, otherwise exactly as mains adaptor NG 2/E. NO 28 706

MICROMOT mains adaptor NG 5/E

With superior capacity of 5A. In compact NORYL casing (heat resistant recommended for transformers). Variable speed control with feedback effect for optimum tool speed and high torque at low speeds. Three polarised sockets for MICROMOT machines. A pair of sockets for standard banana plugs (4mm diameter) is also supplied. Master switch for turning off the transformer without needing to unplug. Red LED indicates ready. PTC (Positive temperature coefficient) protection against overload (plugged in machine will not restart automatically. After cooling down, the mains plug should briefly be unplugged to reset the adapter). With storage holes for tools with 2.35mm and 3mm shafts. Foldable tool rest for the MICROMOT tool. Technical data: 220 240V. Supplies 5.0A at 16 Volt open circuit and 12 Volt under load. Weight 2,000g. Class 2 insulation. NO 28 704

17

The KT 70, small and accurate. Ideal for drill stand MB 140/S and drill press TBM 220.

MICRO compound table KT 70

Made of solid aluminium with surface treatment and fitted with adjustable dovetail gibs and three T-slots of the MICROMOT standard (12 x 6 x 5mm). Adjustable ruler eases workpiece positioning. Both handwheels have zeroresettable dials with graduations indicating 1 revolution = 1.0mm and 1 division = 0.05mm. The clamps and securing bolts for the MB 140/S and TBM are included. Other technical data: Table size 200 x 70mm. X travel 134mm and Y travel 46mm, maximum height 43mm. NO 27 100

Step clamps made of steel

The step clamps set is supplied with the KT 70, but can also be ordered separately. Set consists of 2 stepped blocks and clamps, Tslot nuts of the MICROMOT standard (11.5 x 11 x 4mm), bolts. This set also fits the mill/lathe systems PD 230/E and PD 400. NO 24 256

Two step clamps are included. Moveable ruler eases workpiece positioning.

Table of 200 x 70mm with 3 T-slots.

Handwheels with adjustable dials (1 revolution = 1.0mm, 1 division = 0.05mm).

Precision vise FMZ with integrated clamp

Rotates in all directions. Made of die-cast zinc. Easily clamps to workbenches and tables of up to 60mm. Alternatively, use 2 standard screws to secure to the work surface. Ball and socket: rotates in all directions (even downwards). 75mm jaws with protective covers (for delicate workpieces). Maximum clamping width 70mm and weight 1.6kg. NO 28 608

Precision vise FMS 75

As detailed above, but without clamp. A strong suction cup facilitates instantaneous fixing to any smooth, flat surface. NO 28 602
18

The MB 140/S offers fine feed via the drive disc and ball-bearing drive.

MICROMOT drill stand MB 140/S

The 120 x 220mm table is milled and fitted with a fence and scale. The solid column (280 x 20mm) is made of steel. The headstock is of die-cast aluminium, offering a throat capacity of 140mm and 30mm travel. A chromed feed lever operates via drive disc and ball bearing system, offering a sensitive feed set-up. Slotted guides and fits and pinch screws allow simple height adjustment as well as the fixing of the mill/drill units (20mm bore fitting). The mill/drill collar, with scale, tilts through 90 in both directions. A depth stop as well as drilled, tapped holes for securing the MICRO compound table KT 70 and holes to fix the drill stand itself are also provided. NO 28 606

Note: Our technicians prefer the use of die-cast aluminium as it is clean and stable. All fittings and feeds are machined on our ultra-modern CNC machines, i.e. milling, turning, etc. Pure precision!

Machine vise MS 4
Die-cast zinc. With three machined sides. The slot fits the adjustable fence of the drill stand MB 140/S and bench drill TBM 220. Horizontal and vertical V-slots in jaw. Jaw width 50mm and height 10mm. Maximum clamping width 34mm.

NO 28 132

Universal holder UHZ

Rotates in all directions. Made of die-cast zinc. Easily clamps to workbenches and tables of up to 60mm. Alternatively, use 2 standard screws to secure to the work surface. Otherwise exactly as universal holder UHV. NO 28 610

Universal holder UHV

With suction cap for rapid attachment on flat and smooth surfaces. The ball joint may be swivelled in all directions. The 20mm bore accepts all MICROMOT drills and grinders, e.g. FBS 240/E, IB/E, LB/E, MICROMOT 50, 50/E and 50/EF, FBS 12/E. NO 28 603
19

Complete value for money kit for model-makers and DIYers.

MICRO-compressor MK 240, complete with airbrush AB 100

Note: The airbrush AB 100 is exclusively for use with acrylics.

MICRO-compressor MK 240 The set is light, small and quiet. With adaptor and 200cm hose to connect to the AB 100, as well as 2 paint containers. The single action airbrush AB 100 is ideal for the beginner. Plastic hand piece with adjustable nozzle.

Technical data (compressor): 220 240V. 50/60Hz. 85W. Compressor capacity 12 l/minute, maximum pressure of 2.0bar. Dimensions: 140 x 120 x 95mm. Weight 1,300g. For airbrush purposes only! NO 27 120

MICROFLAME burner MFB/E

Used for soldering, de-soldering, brazing, heating of workpieces, tinning. Individually controllable gas and air supply. Super fine flame shape with temperature attaining 1,300 C. Ideal for precision work. Fitted with an electronic piezo crystal lighter.

Soldering iron EL 12
Extremely short heating time of approx. 10 sec. PTC (positive temperature coefficient) technology ensures exact tip temperature of 310 C. Ideal for working on electronic components. Prevents damage to sensitive electronic components such as transistors and ICs (with temperatures of over 350 C). Lockable on/off switch. Light for illuminating working area. Operates off 12 - 14V DC. Complete with spiral cable and standard MICROMOT jack plug (from 1.0A). NO 28 140

The tank contents of 50ml is sufficient for approximately 120 minutes operation with normal flame. Rechargeable with standard butane cartridges used for lighters. NO 28 146

12 VOLT

Soldering tip
EL 12. Easy to replace by loosening the clamping screw. NO 28 141
20

Precision screwdriver for electronic engineers, camera builders, watchmakers, jewellers, precision mechanics and model makers.

MICRO screwdrivers
Shafts of high alloy nickel-chrome-molybdenum (SAE 8660) for maximum hardness and toughness. Chromed with brinelled tip. The ergonomically formed plastic handles are oil and impact resistant. The revolving top and finger mould improve ease of use. Slot: 1,0 x 40, 2,0 x 40, 3,0 x 40 Philips: PH 0-3 x 40, PH 0 x 40, PH 1-2 x 40 Torx: T 5 x 40, T 6 x 40, T 8 x 40, T 10 x 40, T 15 x 40 Allan key: 1,5 x 40, 2,0 x 40, 2,5 x 40, 3,0 x 40 NO 28 148 15 pieces in a stand

Fixed place for each item in the practical holder. May be used as desktop stand or fixed to a wall.

Note: It is important to use the MICRO screwdrivers with care and feel. The brute force associated with larger screwdrivers is best left for other tools. The revolving top and finger mould improve ease of use.

MICROMOT glue gun HKP 220

Quick and reliable gluing of metal, wood, plastic (including Plexiglass), glass, ceramics, stoneware, cardboard, leather, polystyrene foams and textiles. The adhesive sets in about 2 minutes, allowing positional corrections (which is impossible with instant glues). The 7mm glue sticks are perfect for delicate work such as model build-ing, toy and jewellery making, dried flower arrangements, etc. Sensitive mechanical feed ensures correct glue quantity delivery. Integral stand positions gun on worktop when not in use. Short heating time.

Technical data: 220 240V. PTC controlled element for exact temperature of 200 C. Four glue sticks 7 x 100mm and 3 interchangeable metal nozzles are included in the set. NO 28 192

Replacement glue sticks for HKP 220

For metal, wood, plastic, ceramics, cardboard, leather, polystyrene foams and textiles. 7mm. Length 100mm. Colourless. NO 28 194 12 pieces

Including 3 interchangeable metal nozzles.

21

Bits and cutters for MICROMOT drills and mills of industrial

MICROMOT keyless chuck and collets HSS drill bits
0,5 6 44 6 0,8 44 8 1,0 44

NO 28 941 Three jaw keyless chuck Used on all MICROMOT machines, excluding GG 12, IB/E, LB/E and COLT 2. Capacity is 0.3 3.2mm.

NO 28 940 MICROMOT steel collets Fits all MICROMOT handheld machines (excluding GG 12 and COLT 2). One of each 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm, closure nut and holder are included. See also the note on page 4.

NO 28 864

NO 28 852

NO 28 854

HSS drill bits HSS drill bits. Selected steel quality. Purpose-made one-piece blank. High hardness for optimum life expectancy and Work speeds: soft materials approx. 8,000rpm, hard materials

Milling bits
3,0 5,0 10,0 6,0 6,0 4,0 8,0 5,0 5,0

6,0 3,0 3,0 2,35 2,35 2,35 2,35 2,35

NO 28 722

NO 28 727

NO 28 725

NO 28 724

NO 28 723

NO 28 726

NO 28 720

Wolfram vanadium steel milling bits Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling and slotting. use of MICROMOT steel collets as described above.

Tungsten carbide drills and milling bits

1,0 1,5 2,0 1,0 u. 1,2 8 38 8 38 8 38 30 3 30 3 5,0 5,0 0,6 u. 0,8 2,3 2,3 2,3 2,3

2,35

NO 28 324

NO 28 326

NO 28 328

NO 28 320

NO 28 321

NO 28 750 Tungsten carbide millers Made of wear-resistant avoiding accidents. milling of PC cards.

Tungsten carbide drills Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6, Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft 3.0mm. With ideal cutting angle of 6.

Tungsten carbide milling drills (spear drills) For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft 2.35mm.

Grinding bits
2,5 2,5 7,0 7,0 6,0 6,0 5,0 5,0 8,0 13 2,35 5 p. 5 p. 5 p. 5 p. 3 p. 3,0 3 p. 3 p. 9,0 13

NO 28 774

NO 28 778

NO 28 776

NO 28 772

NO 28 770

NO 28 781

NO 28 782

NO 28 783

NO 28 780

High quality corundum grinding bits. Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of 2.35 or 3.0mm ensure maximum concentricity. Grinding rule: soft materials = hard grinding bits; hard materials = soft grinding bits! 22

and dental quality.

d1 1,2 8 44 10 1,6 44 10 2,1 44
l1 d1

Note: All measures are in mm.

50 28
l2

3,0

NO 28 856

NO 28 858

NO 28 862

NO 28 874 HSS twist drill set to DIN 338 One each of 0.3-0. -0.8-1.0-1.2-1.5-2.0-2.5-3.03.2mm diameter. For drilling non-ferrous metals, steel, high-quality steel. 10 pieces.

NO 28 876 HSS twist drill set with centring pin 1.5-2.0-2.5-3.0 - 3.5 4.0mm. For precision tapping of wood and plastic. The titanium coating reduces friction and increases life expectancy. shanks 0.3mm. 6 pieces.

stable construction with high concentricity. Shaft and bit are manufactured from a elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. approx. 3,000rpm. shanks 2.35mm.

Diamond tools
0,8 u. 1,2 2,3 2,3 3,1 2,3 5 2,3 44 1,8 1,8 5,0 5,0
5,0

5,0

1,0 d1

1,8 d1

NO 28 710 ensure best life expectancy. Ideal for free-hand precision work. For clean and powerful fitting of the milling bits we recommend the

NO 28 255 Diamond twist drills For drilling holes in (semi) precious stones, etc. Shaft 2.35mm.

NO 28 240

NO 28 250

NO 28 212

NO 28 222

Diamond grinding bits With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts 2.35mm.
3,2

1,0
1,2

1,2

2,3 2,3 12 l2
2,1

d1

2,0
d1

3,0
d1 5,0

5,0

22 50

4,0 4,0

12 l2

12 l2

2,1 44l 1 44l 1 3,0 1 p. 1 p. 3,0 1 p. 44l 1 2,35 1 p. 3,2 1 p.

2,35

3,0

NO 28 752

NO 28 758

NO 28 759

NO 28 761

NO 28 760

NO 28 757 Rasp cutter For cutting and milling tiles, stoneware, wood and plastics. Spare cutter for FEX.

highly compressed fine-granular tungsten. Used for vibration-free milling of high accuracy dimensions. It is advisable to secu-re workpieces well, For milling steel, cast steel, non-ferrous metals, plastics and extremely hard materials. May be used for technical work, for engraving and Shafts 3.0 or 2.35mm. Here also we recommend the use of MICROMOT steel collets.

22
2,0 7 2,5 5 2,5

22

8,0 8,0

44

10 p.

10 p.

5 p.

NO 28 270

NO 28 272

NO 28 302

NO 28 304

NO 28 815 Spare arbors Shaft 2.35 x 44mm.

Silicon carbide grinding bits Fine particles of consistent hardness for engraving and frosting of glass, ceramics and stellites. Also for grinding tungsten carbide, chilled cast iron and other hard steel alloys. Shafts 2.35mm.

High quality corundum and silicon carbide grinding wheel Wheels for free-hand and stationary grinding, sharpening, de-burring and smoothening of various metals and materials.

23

Selected cutting, sanding and polishing bits for professional use

Holders for storage of bits and cutters High-polishing
8 7 16 3 15 15 22

2 p.

2 p.

2 p.

10 p.

NO 28 359 Small holders Two tablets 50 x 76 x 15mm for clean storage of bits and cutters such as drills, grinding bits, brushes and other tools with shafts of 2.35, 3.0 and 3.2mm (the last mentioned shaft corresponds to a 1.8 shaft). Insert tools not included.

NO 28 801 NO 28 802 NO 28 803

NO 28 800

NO 28 798

Felt polishers and felt discs Various forms and profiles for multifunctional use. For pre- or high-polishing and aluminium when using the polishing paste. Also suitable for mould construction and tool 2.35mm. When polishing always work at a low rotational speed to prevent the burning of materials and or slightly warm up hard polishing paste containing oil.

Cleaning, polishing
8 13 8 13 22

2 p.

2 p.

5 p.

2 p.

2 p.

5 p.

NO 28 951

NO 28 953

NO 28 952

NO 28 961

NO 28 963

NO 28 962

Steel brushes, cups and wheels High quality components for best operation. For cleaning, removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic, stone and wood. Shaft of 2.35mm.

Brass brushes, cups and wheels Ideal for working on brass, brass alloys, copper, precious metals, semiprecious stones, plastic and wood. For cleaning of electronic components and circuit boards. Shaft of 2.35mm.

Sanding
18 18 13 9 13 9 10

10

5 p. grit 120 5 p. grit 150

10 p. grit 120 10 p. grit 150

5 p. grit 80 5 p. grit 150

5 p. grit 80 5 p. grit 150

10 p. grit 150

NO 28 982

NO 28 983

NO 28 987

NO 28 989

NO 28 980

Sanding discs, caps and bands made of standard corundum. The compounds are of tough consistency and different grits for different sanding stages. Shafts of 3.0mm. Extremely sanding. Steel high, wood medium and plastic low rotational speed. For sanding, smoothening and polishing malleable cast iron, grey cast iron, high quality steel, non-ferrous metals, wood used,

Cutting discs
22 22 1,8 1,8 1,8
1,8

38 38

38

22 22 1,8 1,8

10 p.

50 p.

5 p.

10 p.

50 p.

NO 28 810

NO 28 812

NO 28 820

NO 28 808

NO 28 809

Corundum cutting discs Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of 2.35mm. 24

Aluminium oxide cutting discs with reinforcement The cutting discs are available in 22 x 0.8mm and 38 x 1.0mm. stock. Will cut alloyed, standard and stainless steels, non-ferrous plastic. Arbor shaft of 2.35mm.

and longest life expectancy !

22 22 22

Note: All measures are in mm.

2 p.

2 p.

2 p.

NO 28 297 metal, gold, silver, brass manufacture. Shafts of tools. Also always soften

NO 28 298

NO 28 299

NO 28 291

NO 28 292 Polishing paste Essential for polishing metal and plastic.

Cotton, leather and felt polishers For high gloss finishes on metal, gold, silver, non--ferrous metals, brass, aluminium, ceramics and porcelain when using polishing paste. Can also be used on lacquered wood and plastics. Shafts of 2.35mm. High-gloss French polish needs several operating cycles at medium rotational speed. 5 22 15 3 12 14

Fine polishing
22 3

22

6
10 p.

10 p.

5 p.

4 p.

NO 28 293

NO 28 294

NO 28 288

NO 28 295

NO 28 296

Flexible silicon discs, wheels and bullets Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of 2.35mm. 14 10 13 10 13 14 20 20

Flexible polishing pad set Especially suitable for working gold, platinum, silver as well as for tool making and castings. Shafts of 2.35mm.

20 10 10

30

10 p. grit 150

10 p. grit 120

10 p. grit 120

grit 120

grit 120

NO 28 981

NO 28 978

NO 28 979

NO 28 282 Nylon fleece brushes Used for cleaning, frosting and sanding steel, high quality steel, non-ferrous metals, etc. Shaft of 2.35mm.

NO 28 984

NO 28 985

strong. Different forms for different areas of application. Must be adjusted to the material that needs and plastic. Also for sanding edges. The rotational speed at which the sanding discs and caps are

Flapwheels. These flapwheels are elastic and take on the shape of the workpiece. Ideal for sanding in inaccessible spots. Shaft of 3.0mm.

16 1,8 38 38 1,8 1,8 1,8

38

38 20 19

1,8 5 p.

22

NO 28 818

NO 28 830 Cutting blades made of spring steel 0.1mm thick. For plastic, wood and nonferrous metals. Shaft of 2.35mm.

NO 28 840

NO 28 842

Nearly unbreakable, making them usable to remove metals and even wood and

Diamond cutting disc Only 0.6mm thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of 2.35mm. 25

Selected sets for various applications.

Glass working Electronic technician set Complete polishing set

Four piece set consisting of: 2 diamond grinding bits and 2 silicon carbide grinding bits. For engraving, grinding and frosting glass. Diamond bit 1: ball 1.0mm, diamond bit 2: ball 1.8mm. Silicon carbide bit cone 3/2 x 5mm and cylinder 2/2.5 x 7mm. All shafts of 2.35mm. NO 28 920

Nine piece set For drilling, milling and cutting of circuit boards. Contents: 3 micro drills in sizes 0.5, 0.8 and 1.0mm, 2 milling bits ball shape sizes 0.5 and 2.3mm, 3 cutting discs 22mm with arbor. All shafts of 2.35mm. NO 28 930

Jewellery set

Modeller's set

Seven piece set for working jewellery For jewellers and goldsmiths. Contents: 3 ball milling bits with hole (for milling fittings for pearls etc.) in sizes 3, 4 and 5mm. 1 double cone miller for milling bases for stones with 1.4mm diameter. 1.0 and 1.4mm millers with concave heads (for rounding off wires etc.). 1.0mm hardened spear drill made of tungsten carbide for pearls and stones included. All shafts 2.35mm. NO 28 911

13 piece set for model makers For cutting, milling, polishing and drilling. Contents: 1 fine milling bit each ball shape and cylinder 2.3mm, 1 corundum grinding bit each ball and cone shape 5.0mm. 1 micro drill each 1.0 and 2.3mm. 5 cutting discs 22mm, 1 saw blade 22mm and 1 arbor 2.35mm.

Complete 10 piece polishing set For polishing metal, glass, high quality metal, porcelain and pla-stic. Consists of 3 felt polishing bits (cylinder, cone, wheel), 3 silicon polishing bits (bullet, cylinder and wheel). Cotton wool polishing wheel; chamois buffing wheel and polishing paste (incl. of 2.35mm arbor). NO 28 285

NO 28 910

New for woodworking: rasp cutter with wolfram carbide burrs.

Great for sculpting, cleaning and smoothening of wood and fibre glass. For precision working on and refining of flutes, grooves and furrows. Extremely sharp and very easy to handle: the material can be worked without physical effort no matter whether it is cut with or against the grain. High stability and easy to clean with a Bunsen burner. Also for use on rubber, foam and silicone. RPM: 5,000 20,000. Shaft 3.2mm. Do not use on metal!!!

Ball nose cylinder 7.5 x 12mm

NO 29 060

Flame 8 x 12mm
NO 29 062

Taper 4 x 19mm
NO 29 064 Note: Ideal for wood cutters: rasp disc made of the same material in combination with the MICROMOT long neck angle grinder LWS. See page 6.

Note: The depicted rotary tool is not included.

Tile cutting attachment FEX

Ideal for small cuts in wall tiles, wood and dry wall. drill/grinder FBS 240/E, the MICROMOT 50, 50/E and 50/EF or the professional drill/grinder IB/E. Made of glass-fibre reinforced POLYAMIDE. With depth adjustment and scale. With the 20mm standard fit, it takes only seconds to screw the FEX to the precision . NO 28 756 Complete with 3.2mm rasp cutter of tungsten carbide

Spare cutter for tile cutting attachment FEX

Made of tungsten carbide. With 3,2mm shaft. Ideal for wall tiles. NO 28 757
26

Tungsten carbide wood router cutters, inverse relief ground for cleaner cuts
Slot cutter 3,2mm NO 29 024 Slot cutter 5,0mm NO 29 026 Slot cutter 6,5mm NO 29 028 Rounding over cutter 6,4mm NO 29 030 V-slot cutter 6,5mm NO 29 032 Combi cutter 6,5/2,5mm NO 29 034 Core box bit R 3,2mm NO 29 036 Rebating cutter 6,4mm NO 29 038 Edge cutter with pin 5,0mm NO 29 040 Half round cutter 13mm NO 29 042 Used in the manufacture of picture frames, for slotting, cutting radii and other profiles. Shaft 3.2mm.

10 piece wood router cutter set

A set with one each of the described cutters neatly arranged in a wooden box. NO 29 020

Attention! These router cutters should only be used in machines or accessories with safety mechanism such as the MICRO router MOF (page 11) or the MICRO shaper MT 300 (page 37).

MICROMOT quick change grinding system

The discs with different grit are easy to change and can be used several times.

Spare grinding discs ( 25mm)

Aluminium oxide for steel NO 28 786 grit 40 5 pieces NO 28 787 grit 80 5 pieces NO 28 788 grit 180 5 pieces Zirconium-corundum for high-alloy steel and high-quality steel NO 28 789 grit 50 5 pieces NO 28 790 grit 80 5 pieces NO 28 791 grit 120 5 pieces Grinding fleece for cleaning and finishing NO 28 792 coarse 5 pieces NO 28 793 fine 5 pieces NO 28 794 very fine 5 pieces

Quick change by turning the blocked shaft slightly to the left.

Angle adapter WS 90
With adaptor (that fits to the angle milling/drilling unit WB 220/E, the professional drill/grinder IB/E, the long neck straight drill/grinder LB/E, the precision drill/grinder FBS 240/E and FBS 12/E and to the mill/drill units MM50, MM 50/E and MM 50/EF), three aluminium oxide discs for working steel (grit 40, 80 and 180), three zirconium-corundum discs for working high-quality and high-alloy steel (grit 50, 80 and 120), three grinding fleeces for cleaning, finishing and removing of annealing colours (coarse, fine, very fine). NO 28 785 Complete set Facilitates working in otherwise difficult areas. May also be used for parting metal profiles such as model railroad tracks and as angle grinder. With 20mm MICROMOT collar and extra collets and adaptor (that fits all MICROMOT tools with 20mm spindle neck). Transmission ratio 1:1. Four ball bearing drive. Housing of glass-fibre reinfoced POLYAMIDE. NO 28 405

27

Centre distance 250mm and 40mm swing. Variable speed control covering 1,000 5,000rpm.

MICRO woodturning lathe DB 250

Turning in miniature is a pleasing hobby. One can make glasses, cups, saucers, vases and columns for a doll house. In model trains, one can make lighting
The electronic speed control assists in the lower range in a semi-automated painting process.

masts, windows, tanks. Limbs for marionettes and hundreds of classical miniature turning tasks may be carried out with ease.
Technical data: Centre distance of 250mm, 40mm swing. 25mm swing over support. Motor 220 240V, 150W, 50/60Hz. Variable speed control covering between 1,000 and 5,000rpm. Headstock spindle bore of 10mm. Tail-stock travel 20mm. Includes 6 collets (2 3 4 6 8 10mm), drive centre, live centre and face plate. NO 27 020

Work pieces are secured by means of collets (1 each of 2 3 4 6 - 8 and 10mm are included). Ball bearing spindle is bored through at 10mm. For series production of small parts. Square carrier with back centre and 10mm shaft. Tailstock with quill travel. The stable tool rest is adjustable in all directions.

Powerful drive motor with speed control between 1,000 and 5,000rpm.

The bed is made from stable, thick-walled aluminium profile.

A face plate for turning larger items is included.

Five piece HSS chisel set

Highest quality set with the most frequently used chisels: tube chisel, flat chisel, pointed chisel, anvil chisel and finishing chisel. Neatly packed in a wooden box. NO 27 023

Drill chuck with sliding sleeve for the tailstock of the DB 250
Clamps up to 5.0mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock. NO 27 028

Independent four jaw chuck for the DB 250

With individually adjustable jaws. Used to clamp asymmetrical pieces such as rectangles. The reversible jaws clamp from 1.5 35mm (inside) and from 14 - 67mm (outside). The DB 250 headstock spindle of thread M16 x 1 screws directly into the chuck. NO 27 024

Three jaw chuck for the lathe DB 250

Used for concentric clamping. Made from die-cast zinc and offering 1.5 to 32mm and 12 to 65mm when reversing the jaws. The chuck has a M16 x 1 thread for fitting directly to the DB 250 headstock spindle. NO 27 026
28

Used to cut styrofoam and thermoplastic materials, both freehand and with stencils.

Hot wire cutter THERMOCUT

Note: Styrofoam is a cheap material compared to others and does not harm the environment. It is easily available in art, craft, hobby and similar shops.

The working surface is of aluminium cobond compound. This eases the pushing of work pieces. A printed grid and protractor are applied to the base.

Ideal for architectural models, designers, decorators, artists, teaching too, prototypes as well as classical railroad, plane and boat model building.
Note: The unit's double wound transformer and insulation to class 2 ensure the cutter is absolutely safe. The cutting wire operates at 10V, 1A. The large base with 390 x 280mm table with surface of aluminium cobond compound ensures smooth and easy movement of the workpiece. The printed grid and protractor ease division and cutting. The solid aluminium overarm has a 350mm throat and offers 140mm capacity in height. The holder and wire coil (30m, 0.2mm diameter is included) may be shifted along the overarm to enable mitre cutting. A LED indicates operation and prevents burnt fingers (the cutting wire heats to maximum in less than 1 second). Note: The correct temperature, being material type and thickness dependent, is easily learnt. Optimum profiles are cut at lower temperatures and cutting force. Other technical data: 220 240V, 50/60Hz. Transformer secondary max. 10V, 1A. Cutting wire temperature with 0.2mm diameter is variable between approx. 100 and 200 C. Weight approx. 3kg. Insulated to class 2 requirements. NO 27 080 Double function fence with lockable feed bar (German Patent 100 00 102.5).

Spare cutting wire

Used on the THERMOCUT and other similar units. Made of NiCr 8020. Spool of 30m x 0.2mm. NO 28 080 Crosscuts are achieved by means of a simple yet efficient solution: secure drawing-pin to table by means of tape, it serves as a fixed centre.
29

For perfect straight cuts in wood, non-ferrous metals, plastic and PC cards.
Crosscut super-cut blade 58mm diameter (10mm bore). 80 alternately set teeth. Ideal for hard and soft wood as well as plastic and Pertinax. For fast, clean cuts. Teeth are individually set and sharpened. Superior cutting power! NO 28 014 Solid carbide saw blade 50mm diameter (10mm bore) 0.5mm thick. Fine toothed: ideal for cutting fibreglass sheets up to 3mm, non-ferrous metals, duro-plastics and other difficult materials. NO 28 011 HSS saw blade 50mm diameter (10 mm bore), fine teeth. Designed for precision cutting. NO 28 020 Tungsten tipped saw blades 50mm x 1.1mm (10mm bore).10 teeth. Used to cut hard and soft woods, PC cards, PERTINAX and aluminium. NO 28 016 Diamond blade. 50mm diameter (10mm bore). With 0,5mm layer of class D107 diamond for cutting ceramics, as well as fibreglass sheets. Total thickness 0.7mm. NO 28 012

Bench circular saw KS 230

The 58mm diameter super-cut blade cuts soft woods up to 8mm. The 85W VDE tested motor is quiet, operates off 220 - 240V and has a prolonged life expectancy. Cutting performance: in wood up to 8mm, plas-tics (Pertinax too) to approx. 3mm, non-ferrous metals to approx. 1.5mm. Even fibreglass reinforced PC cards could be cut with the tungsten blade. The side door allows easy sawdust removal. Overall size approx. 240 x 180 x 80mm. Weight approx. 1.8kg. NO 27 006

Important! Power transmission by toothed belt via ball bearings, housed in sturdy casing, ensures the right blade speed for the job (approx. 5,000rpm) with a doubling of torque (approx.). Above all, it ensures good cutting depth.

50mm x 1,1mm (10mm bore). 20 teeth. For extremely clean cuts of balsa, plywood. Can also be used for cutting PC cards and POLYCARBONATE. NO 28 017

Note: The larger version of the circular saw KS 230 (model FKS/E) is described on page 38.

Super-cut blade 58mm diameter, 80 teeth, individually set and sharpened, is included.

Adjustable fence with scale.

Graduated mitre stop.

Machined, die-cast aluminium table of 160 x 160mm.

Quiet, high performance VDE approved motor for prolonged use.

Base of ABS with a sawdust door on the right.

Very important when sawing: use our vacuum cleaner adaptor for a cleaner work environment.
30

Cuts aluminium, wood, PC cards and plastics with standard fret saw blades. With electronically controllable stroke rate.

Scroll saw DS 230/E

Note: Please also see the scroll saw DSH/E (page 36). The new blade clamping system enables the use of the saw blades (without pin) described below.

Adjustable head (patent EP 09783341) offers many advantages (see description below). DM/040788.

Use the vacuum cleaner adaptor to keep your work area cleaner.

The ideal machine for that delicate project: model building, toy making and precision work. Cuts soft wood up to 40mm, hard wood up to approx. 10mm, plastic (including PC cards) up to approx. 4mm and non-ferrous metals up to 2mm. Very stable ribbed die-cast aluminium saw frame with 300mm throat. Blade guide with integrated blower. Height adjustable head (3 positions) offering two advantages: Blade usage is improved as the head may be lowered in two steps, making new blade teeth available. This effectively triples blade life. The lowest head position still allows blades, shortened by 60mm, to be used. Machined worktable of die-cast aluminium, 160 x 160mm. ABS plastic body with side sliding panel for removal of saw dust. VDE approved 220 240V motor (85W) for pro-longed, low noise performance. Quiet, wear-resistant toothed belt drive running in a ball bearing. Electronically controllable stroke rate from approx. 150 2,500/min. Adjustable mitre fence and stop with scale. NO 27 088

Super-Cut scroll saw blades

High quality steel for extended use and prolonged cutting capacity in hard and soft woods, plastic, Perspex and soft non-ferrous metal. Standard version (without pin). Hard and soft woods, plastic, Perspex and soft non-ferrous metal. Coarse-toothed blades (14 teeth per 25mm): NO 28 110 130 x 1.50 x 0.48mm 6 pieces Standard-toothed blades (17 teeth per 25mm): NO 28 108 130 x 1.20 x 0.38 mm 6 pieces Fine-toothed blades (25 teeth per 25mm): NO 28 107 130 x 0,77 x 0.30 mm 6 pieces Hard materials such as steel and PERTINAX. Fine-toothed blades (28 teeth per 25mm): NO 28 104 130 x 1.10 x 0.50 mm 6 pieces Very fine-toothed blades (41 teeth per 25mm): NO 28 106 130 x 0.74 x 0.36 mm 6 pieces
31

For 50mm discs and brushes. With electronic speed control from 8 to 24m/sec.

Grinding and polishing machine SP/E

The dust collector and vacuum cleaner adaptor can be used.

The slim housing facilitates the grinding of long workpieces and includes an adapter to connect a vacuum cleaner to the unit. The tool rests and eye guards are both adjustable. A spindle lock eases the changing of wheels and discs. Supplied with a 50 x 13mm corundum (grade N) and silicon carbide (soft compound) wheel for general grinding/sharpening and hard materials respectively. The right hand spindle accepts the polishing arbor, which is supplied as standard equipment. Technical data: 220 - 240 V. 3,000 - 9,000rpm. Wheels 50 x 13 x 12.7mm. Grinding speed 8 24m/sec. Weight approx. 1,200g. Size approx. 250 x 130 x 100mm. NO 28 030

Polishing set
Steel wire brush for de-rusting and cleaning steel and non-ferrous metals. Brass wire brush to polish non-ferrous metals and precious metals. Felt wheel is used on painted surfaces and the chamois and cotton wheels provide a high gloss finish on non-ferrous metals and precious metals. NO 28 312 Complete set

Spare discs for the SP/E and BSG 220 (50 x 13mm)
Corundum (grade N) with 12.7mm bore NO 28 308 Silicon carbide with 12.7mm bore. Soft compound for very hard materials. NO 28 310

Cut off saw KG 50 Accurately cuts small items of metal, wood and plastic.
Table moveable through 45, allowing mitre cuts. Workpiece is fastened tightly and accurately by means of the integrated clamping device. Clamp jaws 27mm wide and maximum workpiece diameter 20mm. Depth of cut to 13mm. A special slot is provided to clamp HO model tracks. The fence accepts lengths up to 140mm. Five ceramic cutting discs 50 x 1.0 x 10mm are also included suitable for cutting steel, non-ferrous metals as well as wooden or plastic rods. Technical Data: 220 240V. 85W. 50/60Hz. Peripheral speed 20m/sec. Weight approx. 1.5kg. NO 27 150

Replacement cutting discs

Made of ceramic compound: 50% aluminium oxide and 50% silicon carbide. Suitable for cutting steel, non-ferrous metal as well as small wood and ceramic bars. NO 28 152
32

Easy sharpening of drill bits from 3 to 13mm diameter, standard angle of 118.

Drill sharpener BSG 220

Note: The Proxxon Drill Sharpener comes complete with full instructions to ensure even a novice can sharpen drill bits. These instructions will help get good results every time.

The sharpening operation is controlled exactly by means of the movable carriage. This moves from left to right and also rotates the drill bit on its own axis. This operation yields the correct relief angle. The carriage is fitted with a feed screw for fine feed. A dressing stone, ensuring a sharp cutting surface, is also fitted. Other technical data: Corundum grinding disc size 50 x 13mm. 220 -240V, 85W. ABS housing with fixing holes. Weight 1.7kg. An easy to understand operating manual and replacement disc accompany the unit. For further spare discs see page 32. NO 21 200

Adaptors for sharpening of small drill bits

These adapters extend the BSG 220s range to cover 1.5 - 3mm. One each adapter for sizes 1.5 - 1.6 - 2.0 - 2.4 2.5 and 3.0mm. Neatly packed in a wooden box with sliding lid. NO 21 232

Vacuum cleaner controller AS/E Switches your dust extractor or vacuum cleaner on and off.
The controller supplies the power tool (either portable or stationary) and vacuum cleaner with power. It switches on the vacuum cleaner while the power tool is operational. Once the power tool is switched off, a 3 second run-down period ensures the workplace is properly vacuumed. Additional switch positions switch the vacuum cleaner on or off perma-nently. Usable with power tools of 25 - 500W and vacuum cleaners of up to 1,500W. NO 27 032

Tip: Using a wooden block can easily position your extraction to where you are working.

33

For precision work: even 0.5mm holes may be drilled. With three step pulleys for easy speed change.

Bench drill machine TBM 220

Note: The optional MICRO compound table to shown is described on page 18.

Fully adjustable depth gauge.

Machine vice MS 4 made of die-cast zinc is an invaluable accessory and is described in detail on page 19.

Machined worktop of high quality, ribbed die-cast aluminium (220 x 120mm). Adjustable fence with scale. Solid, hard-chromed steel column, 340mm high, 20mm diameter. Super stable die-cast head with VDE approved 220 - 240V motor. Very quiet and of long life expectancy type. Power transmission by aluminium pulleys and flat belt. Three spindle speeds (triple torque at low speeds). Feed lever with adjustable depth scale. Technical data: 220 240V 85W. 50 60Hz. Spindle speeds of 1,800, 4,700 and 8,500 rpm. Extremely high rotational accuracy, 30mm feed. Throat depth (column to drill spindle) 140mm. Six triple slit precision collets for shaft sizes 1.0 1.5 2.0 2.4 3.0 3.2mm are included. 3/8 thread. Weight 3.3kg. NO 28 128

Dividing head for MICRO miller MF 70 and MICRO compound table KT 70

This accessory is used to drill offset holes, holes with equal spacing as well as milling key surfaces in 4 sided, 6 sided, etc materials. Graduated on the base. The chuck jaws may be reversed to yield 1.5 - 32mm (inside) and 12 65mm (outside) and bore of 11mm. This through hole allows long items to be clamped vertically in the chuck. Mounting holes to secure the unit vertically or horizontally are provided. T-nuts, complying with the MICROMOT norm, as well as mounting screws are included for mounting on the MICRO miller MF 70 and MICRO compound table KT 70. Size 72 x 64 x 38mm. Supplied in wooden box with sliding lid. NO 24 264

RHM-Chuck
For drill shank sizes 0.5 to 6.0mm. Max. speed 10,000rpm. Industrial quality with extra high speed accuracy. With 3/8" thread for MICROMOT bench drill TBM 220. NO 28 122

34

Small and beautiful: the accurate miller for lab technicians, optician, jeweller, electronic/model builder.

MICRO miller MF 70

Handwheels with zero adjustable scales, 1 revolution = 1.0mm, 1 division = 0.05mm.

Tungsten milling cutters

Two flute cutters and a fishtail profile ensure cutting to the centre, allowing boring. Usable on grey cast iron, hardened cast iron, steel, cast steel, brass, aluminium, glass en even plastics and car-bon fibre. One each of 1.0 2.0 and 3.0mm. 3.0mm shaft diameter. Can also be ordered separately. NO 27 116 3 pieces Cutter clamping in MICROMOT system collets. Now supplied complete with stepped clamp blocks of steel. These are shown on page 18 (offered separately). Continuously variable speed from 5,000 20,000rpm, perfect for even the smallest milling cutter.

Table of stable aluminium. Both axes are fitted with adjustable dovetail slides.

MICROMOT steel collets, triple slit and hardened, from 1.0 to 3.2mm. Stable cast iron base.

For work with extremely small cutters.

Base of grey cast iron. Including both vertical column and compound table of treated, quality aluminium. All axes are play-free and have adjustable gibs. Headstock of die-cast aluminium contains the 24 pole special (balanced) motor is super stable even at high operating speeds. This stability facilitates the use of the finest cutters. The triple slit, hardened steel MICROMOT collets cover 1.0 1.5 2.0 2.35 3.0 3.2mm. The table is fitted with 3 T-slots of the 12 x 6 x 5mm MICROMOT norm. An adjustable ruler scale eases the positioning of the workpiece. All handwheels are zero adjustable with 1 revolution = 1.0mm, 1 division = 0.05mm. Technical data: 220 - 240V, 100W, 50/60Hz. Spindle speeds 5,000 - 20,000rpm. Table 200 x 70mm with X- Y travel of 134 and 46mm respectively, with vertical travel 80mm. Footprint size 130 x 225mm and overall height 370mm. Weight approx. 7kg. The clamping blocks depicted are included too, but not the workpiece! NO 27 110 NO 24 260
35

Precision steel vise PM 40

Milled from Steel for precision. Completely angular. Jaw width 46mm, clamping capacity 34mm. Total length 70mm. Especially suited for filigree and accurate working with the MICRO miller MF 70 or the compound table KT 70. Sliding blocks and fixing screws included. Comes in a wooden box.

Super-quiet! With electronic speed control from 200 1,400 strokes per minute. Smooth cuts without the need to finish.

Scroll saw DSH/E

Simple quick release lever for quick blade changes (essential when cutting internally).

The DSH/E and DSH are fitted with a vacuum system adaptor, used to keep the working area dust-free.

Note: Scroll saw DS 230/E, which is the ideal machine for delicate projects, is offered on page 31.

The perfect machine model building, toy repairs, puzzles, architectural work, prototypes and for tool and die making. scroll saw blades without pin ends.
Super cutting capacity (wood 50mm, plastics 30mm, non-ferrous metals 10mm) and yet runs with only a hum. Perspex, PC fig.1 cards, foam, rubber, leather and cork are easily cut. Free moving blade chucks accept both pin and plain end blades. The slender overarm facilitates a clear view of the workpiece. The photo (fig. 1) shows the superb quick change lever, used especially with internal cuts. Air blower with adjustable nozzle provides clear visibility of workpiece and cutting line. Machine base of cast iron with rubber feet for vibration-free operation and stability, may also be screwed down. The sturdy table 360 x 270mm tilts up to 45 for mitre sawing (fig. 2). Channel for the connection of a vacuum cleaner. Complete with 5 each coarse and fine blades. fig.2 Other technical data: 220 - 240V. 50/60Hz. The special motor draws 200W and the electronic speed control yields constant speeds under load from 200 to 1,400/min. Stroke 19mm. 400mm throat with 50mm maximum depth of cut or 25mm at 45 table tilt. Length 53cm, height 30cm, width 27cm. Weight approx. 20kg.

2-speed scroll saw DSH

NO 27 090
36

Technology, range, cutting power and other properties as described on the left for the DSH/E, but without continuous number of strokes adjustment and without a quick action saw blade arrangement (chuck lever, T-screw) on the overarm. A somewhat narrower table (360 x 180mm, instead of 360 x 270mm). Technical data: 220 240 V. Powerful brushless 2-speed motor (205 W), stroke 990 or 1,500/minute, to choice. Stroke 19mm. 400mm throat with 50mm maximum depth of cut or 25mm at 45 table tilt. Length 53cm, height 30cm, width 27cm. Weight approx. 20kg. NO 28 092

For difficult work with wood and specialist plastics.

MICRO shaper MT 300

The MT 300 is fitted with a dust collection channel and vacuum adaptor.

For standard scroll saw blades with pin ends as well as for
Standard scroll saw blades with pin ends. 127mm:
Coarse pin end blades (10 TPI): ideal for cutting soft and hard wood, plastics as well as soft and above all also thicker material. NO 28 740 127 x 2.61 x 0.51 mm 6 blades Fine pin end blades (18 TPI): ideal for cutting thin materials, soft and hard wood as well as plastics. NO 28 742 127 x 1.86 x 0.24 mm 6 blades Very fine pin end blades (25 TPI): ideal for cutting non-ferrous metals, PC cards, plastics, perspex and wood. NO 28 744 127 x 1.76 x 0.25 mm 6 blades

Used to profile, slot, route, chamfer, trim and cut. Also used for precision details on sides and long sections, e.g. doors, flaps and housing components. Powerful, dust protected motor with toothed belt drive. Double ball bearing spindle. Cutters fitted in triple slit collets (1 each 2.4 - 3.0 and 3.2mm) are supplied. Cutter height adjusted by means of handwheel, zero adjustable with 1 revolution = 1.0mm and 1 division = 0.05mm. Stable aluminium table with mitre gauge and parallel fence, as well as cutter guard and hold-down. Housing of ABS. Adaptor for vacuum cleaner, fits standard household appliances. Technical data: 220 240V. 100W. 50/60Hz, 25,000rpm. Table 300 x 150mm. Weight approx. 2.0kg. NO 27 050

Super-cut scroll saw blades without pins. 130mm.

For cutting soft and hard woods, plastics, Perspex, soft non-ferrous metals: Coarse-toothed blades (14 TPI): NO 28 110 130 x 1.50 x 0.48 mm Normal toothed blades, (17 TPI): NO 28 108 130 x 1.20 x 0.38 mm Fine-toothed blades (25 TPI): NO 28 107 130 x 0.77 x 0.30 mm6 blades 6 blades

Wood router cutter set, 10 pieces

A set with one each of the single cutters , neatly arranged in a wooden box. NO 29 020

6 blades

For hard metals like iron or PERTINAX: Fine toothed blades (28 TPI): NO 28 104 130 x 1.10 x 0.50 mm 6 blades Extremely fine toothed blades (41 TPI): NO 28 106 130 x 0.74 x 0.36 mm 6 blades

Note: These wood router cutters can be ordered separately. See the description on page 27.

Spiral blade. 125mm long with plain ends (without pins).

These blades cut all directions and obviate the turning of the workpiece (advantageous, especially with bigger workpieces). A 1.5 mm hole is required. Ideal for plastic, hard and soft woods. NO 28 746 125 x 1.2 mm 6 blades

37

Accurate, straight cuts are easy. Standard with height adjustment and 45 tilting saw blade.

Table saw FKS/E

Note: The smaller bench circular saw KS 230 is described on page 30.

EL

TRONIS EK

HE C

ZA

HLREGE

The FKS/E is fitted with a dust extractor adaptor, to keep the working area dust-free.

The ideal machine for straight, mitre and compound cuts. Usable on all wood types, non-ferrous metals, plastics (ABS, perspex, PC cards, foam) as well as rubber, cork and many other materials.
Even the smallest items may be cut cleanly, obviating subsequent finishing: a table indicates the recommended speeds for various materials. Very stable construction with load bearing parts of die-cast aluminium. Machined aluminium top measures 295 x 240mm. A mitre slot and fence are provided. An extension wing is housed integrally and pulled out to increase effective table width to 500mm. Drive is effected via a special, quiet motor with optibelt toothed belt. The blade arbor runs in a ball bearing and is fitted with a tungsten carbide blade (80 x 1.5 x 10mm (24 tooth. No 28 734) as standard. Depth of cut is adjustable from 1 22mm and the blade may be tilted through 45. Technical data: 220 240V, 50/60Hz. Electronic speed control, with feedback effect, for speeds of 4,400 6,800rpm. Overall size: 300 x 262 x 170mm (without extension wing). Weight approx. 5.2kg. Table size: 295 x 240mm. Depth of cut: 1 22mm, uses all blades 50 - 85mm diameter with 10mm bore. NO 28 070

Dado head set

The dado set consists of a guard and tungsten saw blade. 50 x 2 x 10mm. Used to cut slots (dados) in drawers, picture frames, etc. Slot depth max. 8mm. Easy set-up. NO 28 736

Super cut 85 x 0.5 x 10mm. 80 teeth. Use on hard and soft woods, plastics.

NO 28 731
38

Tungsten carbide tipped 80 x 1.5 x 10mm. 36 teeth. Use to cut balsa, plywood, hard and soft woods, POLYCARBONATE, plastic, aluminium and PC cards. NO 28 732

Tungsten carbide tipped 80 x 1.5 x 10mm. 24 teeth. Use on aluminium, hard wood, laminates, plastics.

Diamond coated 85 x 0.7 x 10mm. Use on stone and tiles.

NO 28 734

NO 28 735

LU

DRE
H

NG

The smallest and cutest in the world: 40 x 80mm capacity!

Thicknesser DH 40

Load bearing components are all made of die-cast aluminium, with milled seats for bearings and spindles. These characteristics are essential for vibration-free, smooth thicknessing of hard and soft woods. The result: a highgrade, very smooth surface. The triple spindled table is made from die-cast aluminium and milled to close tolerances. The handwheel (zero adjustable) allows adjustments to 0.1mm. Auto feed is fitted as standard, as well as an anti-kickback device. The infeed roller is riffled and spring loaded to assist in feeding uneven materials. The outfeed roller is rubber coated to prevent marking the newly planed wood.

The cutter block is fitted with two HSS knives. The on/off switch is dust protected and fitted with a no-volt release.

Technical data: 220 240V. 200W. 50/60Hz. Thicknessing to 80mm wide and 40mm thick. Maximum depth of cut 0.8mm. Cutter speed 6,000rpm and feed rate 4.8 m/min. Table length 232mm. Overall machine dimensions 280 x 230 x 235mm. Weight approx. 8kg. NO 27 040

Note: Minute splinters can influence the usefulness of planed wood. Precision is even more important when working in miniature. The thicknesser DH 40 allows clean thicknessing as from 1.0mm material (in combination with an under-layer and double-sided adhesive tape).

Spare blades
For thicknesser DH 40. Made of HSS. Length 82mm. NO 27 042 1 pair
39

Perfect cuts in steel, non-ferrous metals, wood and plastic. Even cuts glass and ceramics with diamond blade.

MICRO bandsaw MBS 240/E

Solid, ribbed die-cast aluminium housing (not a tubular or sheet metal construction). Double ball bearing aluminium pulleys. Sturdy, machined table with slot for mitre gauge as well as coolant trough. Triple ball bearing system with blade guides. Adjustable for different widths of saw blades and with feed pipe for coolant when used with the diamond blade. Table tilts through 45 for accurate mitre sawing. Low noise 220V motor (high quality, for quiet, prolonged use) with optibelt toothed belt. Electronically controlled speed for exceptionally accurate cutting (no subsequent finishing necessary). A table indicates the recommended MBS230/E MBS 240/E speed for practically all materials. The blade size (5.0 x 0.4mm) is ideal for fine work, allowing cutting of small radii.
Diamantiertes Sgeband
Steine, Halbedelsteine

Stahlsgeband

GFK (glasfaserverstrkt)

Aluminium

Weichholz

Polystyrol

Acrylglas

Kupfer

Messing

Hartholz

Keramik

Fliesen

Stahl

Glas

ABS

PVC

Technical data: 220 240V. Blade speed adjustment from 180 to 330m/min (feedback effect). Throat 150mm, maximum height 80mm. Table 200 x 200mm (tiltable from 0 to 45). One blade 1,065 x 5.0 x 0.4mm (14 TPI) is included. NO 27 172

Blade guides separately (see figure above)

Triple ball bearing system with feed pipe for coolant when used with the diamond blade. Can also be used in conjunction with normal blades. NO 28 187

Blades for MBS 240/E

Swedish steel. 1,065 x 5.0 x 0.4mm. Fine toothed (24 TPI). For steel and brass. NO 28 174 As above, but coarse toothed (14 TPI). For wood and plastics. NO 28 176 As above, but of special tempered steel, with induction-hardened teeth. Extra narrow for tight curves (1,065 x 3.5 x 0.5mm). Coarse toothed (14 TPI). For aluminium and plastic. NO 28 180

Diamond blade for MBS 240/E

For cutting stone, ceramics, glass and PC cards. 1,065 x 3.0 x 0.3mm. Must be used in conjunction with coolant system! NO 28 186

Note: TPI stands for the number of teeth per inch (25mm) per band saw blade.

40

Regelstufe

6 5 4 3 2 1

With adjustable grinding speeds between 250 and 750rpm. Ideal for wet sanding.

Disc sander TG 250/E

Coolant system for wet sanding of glass, stone, tiles and steel.

Sands long edges, end sections, radii, mitres, and, by turning the workpiece over accurate flat surfaces at right angles. Used on soft and hard woods, non-ferrous metals, steel, plastics (perspex and PC cards), cork and rubber. A simple chart indicates the recommended speeds on different materials. Sturdy construction: Main body of ribbed die-cast aluminium (not a steel tube or sheet metal construction). Machined backing disc, driven by a twin ball bearing spindle. Self-adhesive sanding discs fix firmly and can be replaced quickly. A dust collection adaptor for attaching a vacuum cleaner or dust extractor is included. Technical data: 220 240V with drive via optibelt toothed belt (reduction ratio 7.3:1). Electronic speed control approx. 250 750m/min. Disc diameter 250mm. Maximum sanding height 135mm, table 275 x 105mm (tilts 15 in, 45 out). Overall size without table 330 x 280 x 230mm. Complete with mitre gauge and 2 each sanding discs of 80 grit and 240 grit. NO 28 060

250mm-sanding disc machined with diamond tools. Double ball bearing.

The band saw and disc sander are equipped with vacuum cleaner adaptors: work in a clean, dust-free environment.

Self-adhesive corundum sanding discs for TG 250/E

Industrial quality. For sanding soft and hard woods, laminates, non-ferrous metals, steel, plastics, cork, rubber and minerals. 250mm. NO 28 970 80 grit 5 discs NO 28 972 150 grit 5 discs NO 28 974 240 grit 5 discs

Accessories for wet sanding and cutting of glass, stone and tiles in conjunction with bandsaw MBS 240/E and disc sander TG 250/E. Coolant container
Made of plastic. With stop cock and regulator. 100cm tubing as well as 2 nipples for the MBS 240/E table and mounting bracket (incl. screws). Holds 1 litre. NO 28 188

Self-adhesive silicon carbide sanding discs for TG 250/E

For sanding non-ferrous metals, steel, glass, PC cards, plastics and ceramics. May also be used with the coolant option. 250mm. NO 28 976 320 grit 5 discs

Self-adhesive silicone film for quick change of sanding discs ( 250mm)

The film is attached to the sanding disc of the TG 250/E. The silicone surface allows that the attached sanding discs can easily be removed after completion of the work. Four square silicone films for re-using the used sanding discs are included. NO 28 968
41

Coolant collection tray

Size 420 x 310 x 15mm. Includes gasket for sealing the fixing holes of the machine. With 50cm discharge tube and nipple for the band saw table. The tray is not drilled and may be used on other machines too. NO 28 189

For clean, safe cutting to length of non-ferrous metals, plastic and wood.

Cut off/mitre saw KGS 80

Note: Cut off saw KG 50 the baby among the KGS 80 cut off/mitre saws (weighs only 1.5 instead of 6.0kg) is described on page 32. Optional blades for the KGS 80 are offered on page 38 in combination with our table saw FKS/E. Comfortable grip with built-in switch and saw head release button.

Laterally moving saw head to minimize the distance between the vice holding the workpiece and the kerf. For cutting without vibration and chattering!

The blade guard, made of POLYCARBONATE, is raised automatically. Tungsten carbide blade for non-ferrous metals, wood and plastic. Direct drive via a toothed belt.

Fence adjustable to 300mm.

Round table made of die-cast aluminium, rotates 45 left and right. Positive stops in 15 increments.

Integrated clamping system with fixed jaws. V-slot for round workpieces. Front side slot allows thin pieces to be clamped.

This machine is ideal for mitre cuts: the round worktable with clamped work piece rotates, not the headstock!
The laterally moving headstock (patent DP 103.18.479.1) eliminates any possibility of the blade and clamping system colliding. The minimum spacing between the kerf and clamping system ensures cutting with a minimum of chatter and vibration! The fence and 45 mitre capability ensure identical lengths for picture frames. Powerful, quiet DC motor. Power transmission takes place via a toothed belt. The tungsten tipped saw blade (80 x 1.6 x 10mm, 24 teeth) cuts non-ferrous metals, wood and plastic. Other technical data: 220 240V. 200W. 50/60 Hz. 6,000/min. Base with round table of highly stable, die-cast aluminium, with CNC milled fittings and slides. Table size 230 x 230mm. Weight 6kg. Consult the table for cutting capacities.

Cutting capacity at 90 (right angle cut)

Material size (in mm) Max. material width (in mm) Round material (in mm)

Cutting capacity at 45 (mitre cut)

Material size (in mm) Max. material width (in mm) Round material (in mm)

10 18 21 25

65 50 40 25 max. 25

5 10 15 20

36 30 25 18 max. 20

Cutting disc with reinforcement, 80 x 1.0 x 10mm

Corundum compound, used for cutting steel, non-ferrous metal, plastic and wood. NO 28 729

Tungsten tipped crosscut saw blade, 80 x 1.6 x 10mm, 36 tpi

The high tooth count yields clean cuts when cutting a variety of materials, e.g. balsa, plywood, soft wood and PC cards. May also be used on hard wood, POLYCARBONATE, plastic and aluminium. Fits the table saw FKS/E as well. NO 28 732

NO 27 160

42

Sublime precision tool. Ideal for the lab, workshop and delicate operations.

Drill press TBH

Made of highly stable die-cast iron parts with CNC milled fittings and slides.
The height adjustment is easily altered by means of the headstock crank and lock lever. The table features a ribbed base, milled work area with T-slots. Powerful, long life 220 - 240V motor. The quill is driven via a polyV belt and three step pulleys. This yields a torque multiplication of as much as 6x at the lowest speed. Practical depth gauge with adjustable depth stop. Sliding quill for delicate works. Drill spindle with precision bearing. Spindle head with 1/2" thread accepts the RHM chuck (industrial quality), as well as the optional collets.

Note: The smaller version of the TBH the bench drill machine TBM 220 is described on page 34.

Ideal also for jig boring with the compound table KT 150 (page 54). Technical data: 220 240V motor with spindle speeds 1,080, 2,400 and 4,500rpm. Quill travel 63mm, headstock travel via the crank 70mm. Throat of 140mm. Maximum drill bit size 10mm, which is also the capability in steel. The optional collets offer a capability to 6mm. Useable table size 200 x 200mm. Column 45 x 500mm. Weight 10kg. NO 28 124

The height adjustment is easily altered by means of the headstock crank and lock lever .

Collet set for drill press TBH

Triple slit and hardened. One each of 2.35 3.0 3.2 4.0 5.0 and 6.0mm. Also includes the collet closure nut (M17). Neatly packed in wooden box with sliding lid. NO 28 200

T-nut set for PRIMUS vises

Two T-nuts and cap screws with washers. Used on the drill table of BFB 2000, KT 150 and drill press TBH. NO 20 394

Smooth-running precision vises. Ease of operation and accuracy.

PRIMUS 75
Base made of special cast iron with CNC machined ways. Fitted with interchangeable, hardened jaws. Both jaws are slotted at the top, facilitating gripping of flat work pieces. The feed screw features a rolled thread which ensures ease of movement even with high axial loads. Jaw width of 75mm, opening to 65mm. Distance between centres of fixing slots is 100mm. Slot size 80 x 11mm. Weight 2.5kg. NO 20 392

PRIMUS 100
Jaw width of 100mm, opening to 75mm. Distance between centres of fixing slots is 135mm. Slot size 105 x 15mm. Weight 5.0kg. Other details as for the PRIMUS 75. NO 20 402
43

Expandable lathe/milling system made in Europe. Visible and tangible constant precision.

Lathe PD 230/E
Usable on materials such as steel, brass and aluminium and plastic. Complete with automatic feed, thread cutting capability, headstock chuck, live centre and top slide for taper turning. Used to part, machine stock and cut tapers. The numerous optional accessories allow one to drill, mill and slot.

Headstock spindle Main switch with with 10.5mm bore and MK1 emergency stop function and restart protection. taper.

Three jaw chuck, 2 - 68mm capacity.

The top slide, used for taper turning, and the tool holder are included as standard!

Gear casing with table showing the appropriate speed for the material and diameter.

Combination of three speeds (attained by swapping drive belt position) and electronic speed control yield speeds of 100 to 3,000rpm.

Enclosed lead screw for automatic feed of 0.05 or 0.1mm/revolution.

Cast iron bed with ground prism for tool rest and tailstock ensures minimal deflection, even at high loads.

Technical data: Centre distance of 230mm, swing 52mm. Height over cross slide 28mm. Cross slide travel 60mm and top slide 45mm. Steel tool holder accepts 8 x 8mm cutters. The MK1 (short) spindle has a 10.5mm bore. It runs in precision ball bearings, yielding an accuracy of 0.01mm with-out chuck. The thread cutting capability covers the most important pitches of 0.5 0.625 0.7 0.75 0.8 1.0 1.25 and 1.5mm. Spindle speeds are changed by means of a belt and offers 300, 900 and 3,000rpm. The electronic speed control further extends the speed range down from
44

100rpm (which is important when cutting threads) to 3,000rpm. The automatic feed offers 0.05 or 0.1mm per revolution. The tailstock spindle has a MK1 (short) bore and 30mm travel. The quiet 220 - 240V motor is fitted with a forward/reverse switch. The three jaw chuck offers 2 35mm capacity (internal jaws) and 24 68mm (external jaws). The handwheels are fitted with zero adjustable scales. One revolution equals 1mm feed (40 divisions) and hence 0.025mm/division. Weight approx. 10kg and dimensions approx. 530 x 250 x 150mm. NO 24 004

Accessories for the lathe PD 230/E (also compatible with its predecessor PD 210).
Collet set covering 2.0 10mm for concentric accuracy better than 0.02mm. For accurate use on round com-ponents. The col-lets are mounted in the place of the headstock chuck. Eight collets (one each 2.0 - 2.5 - 3.0 - 4.0 - 5.0 - 6.0 - 8.0 and 10mm) are included. Supplied in a wooden box with sliding lid. NO 24 042

Four jaw chuck. The 4 jaws are adjusted independently, thus clamping unsymmetrical pieces, ovals, squares and oddshaped work pieces. Capacity of 80mm. NO 24 030

MK 1 live centre included as standard.

Centre turning attachment. Used for highest accuracy with high rotational precision. One face plate, 2 fixed MK 1 (short) centres and 1 drive dog are included. Supplied in wooden box with sliding lid. NO 24 070

Practical handwheels with zero adjustable scales. 1 division = 0.025mm, 1 revolution = 1mm.

Gear chuck Capacity to 10mm, with key and MK1, for tailstock. NO 24 020 As above, but with 10mm arbor. for mill/drill unit. NO 24 110

Quick change tool post for PD 230/E Easy to use! Enables quick tool changes and easy height adjustments. Including 2 tool holders for lathe tools up to 10 x 10mm. NO 24 022 Additional quick change tool holder (separately) Can be used with the above mentioned quick change tool post. NO 24 024 piece Fixed steady Used when turning long, slender pieces, capacity up to 40mm (). Also used when the tailstock cannot be utilised. NO 24 080 45

Lathe system PD 230/E. Versatile and expandable. Precision made in Europe.

Splash guard and chip collecting tray for PD 230/E

Made from 1.5 mm thick sheet metal, powder coated. Bevelled edges at the front and back allow slight cleaning. Mounting hole and raised base to secure lathe are pre-drilled. Length 495mm, width 215mm, height 150mm. The depicted lathe is not included in the offer. NO 24 006

Dividing attachment TA 230 For lathe PD 230/E, micro miller PF 230 and FF 230
Facilitates the machining of gear teeth and non-concentric patterns. Supplied with two dividing discs (40 and 48 teeth), enabling standard divisions of 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 40 and 48. The spindle of the attachment is identical to that of the lathe PD 230/E. The 3 (can be ordered separately under No 24 028, see below) and 4 jaw chuck (No 24 030, see page 45) may therefore be fitted to it as well (the chuck is an optional accessory). May be fitted to the lathes cross slide or to the bed. Supplied in a wooden box with sliding lid. The 3 jaw chuck depicted here is not included in the offer. NO 24 131

Self-centering 3 jaw chuck

Identical to the chuck of lathe PD 230/E. Radius 2 68mm (with reversing chucks). Body of steel. Suitable for lathe PD 230/E and the above described dividing attachment No 24 131. NO 24 028

Mill/drill head PF 230 Converts the lathe PD 230/E into a complete machining centre.
Set includes column (35 x 400mm), mounting bracket and bolts. The mounting position on the PD 230/E is already milled. The lathes top slide is replaced with the table (supplied) of 110 x 70mm, with 3 T-slots 12 x 6 x 6mm. The lathe now functions as a compound table, with X-Y travel being longitudinally and cross-wise respectively. The mill/drill head is identical to the micro miller FF 230 (see page 47). Three collets of sizes 6, 8 and 10mm are included. NO 24 104

46

A small, high accuracy machining system to mill, drill and bore.

MICRO miller FF 230

Handwheel serves as both height adjustment and mill fine feed. The headstock swivels through 360, indicated on a scale. Height is adjusted via a zero adjustable handwheel, also used as fine feed when milling (one revolution equals 1mm travel). The quill and headstock may be locked in position, essential when milling. The powerful motor effects drive via a poly-v belt, yielding high torques, especially at lower speeds. Collets of 6, 8 and 10mm are included. The solid table is T-slotted to the MICROMOT norm of 12 x 6 x 5mm. Other technical data: 220 240V. 140W. 50/60Hz. Spindle speeds of 280, 550, 870, 1,200, 1,500 and 2,200rpm.. 30mm travel. Table size 270 x 80mm, column 35 x 400mm long. X-Y- travel is 170 x 65mm. Maximum height 180mm and depth 130mm. Overall height approx. 500mm. Weight approx. 17.0kg. NO 24 108

Poly-V drive system offers 6 speeds between 280 and 2,200rpm.

The fine step feed is not included.

The clamps (not included) are described on page 53.

Note: For more lathe and milling accessories and bits and cutters, see pages 52/53.

Important! For clean milling we recommend to clamp the quill as well as the headstock onto the column. With the FF 230 this is easily done with the clamp.

Handwheels with zero adjustable scale (1 rev = 1mm, 1 division = 0.05mm).

Compound table KT 230

As described above, but excluding headstock and column. 35mm bore. Fits the PF 230 and PF 210. Weight approx. 11 kg. NO 24 106

Fine feed for milling machine PF 230 and MICRO miller FF 230
Easily installed in a few seconds. The feed may be used via either the height feed (vertical) or the fine feed in the tilted position. The graduated scale may be zero reset. One revolution is equivalent to 1.5mm spindle travel (1 division = 0.05mm).

Five piece collet set for PF 230 and FF 230

Includes 1 each of 2.4 - 3.0 - 3.2 - 4.0 and 5.0mm, for milling cutters. Supplied in a wooden box with sliding lid.

NO 24 140 NO 24 144
47

Accuracy and versatility made in Europe. DIN 8606. With gearbox.

Note: Accessories and insertion tools for the PD 400 system, see pages 50-53.

Complete with change gears to cut threads (in 19 steps from 0.2 to 3.0mm). Clearly positioned and easy to change.

Main switch with auto-start protection and emergency off. RHM precision feed ( 100mm).

Powerful capacitor motor with 550W output power.

Selector for auto-feed.

Apron handwheel.

Quick-change tool post with 2 holders (with stop and height adjustability).

Switch for clockwise, off and counter-clockwise rotation.

Lathe PD 400 is the heart of a multifunctional and expandable system and is unequalled in its class !
Ideal for straight and cross cuts, taper turning, internal and external thread cutting, slotting, etc. Useable on materials such as steel, non-ferrous metals, aluminium and alloys. Negligible tolerances even under heavy loads. The wide range of accessories complements the lathes functions. The bed is already equipped with a milled and tapped surface for securing mill/drill PF 400. Technical data: Distance between centres 400 mm and cross slide travel 85mm, over the top slide is 116mm. Solid, ribbed bed is made from quality cast iron with ground and hardened ways. Oversized spindle with 2 adjustable taper bearings, MK3 taper and 20.5mm bore. Run-out, without chuck, 5/1,000mm. Includes the precision 3 jaw chuck, 100mm diameter. Six spindle speeds are provided via belt drive: stage 1: 80, 330, 1 ,400rpm and stage 2: 160, 660, 2,800rpm. Powerful, quiet motor with 550W power output. All adjusting wheels fitted with scales that may be zeroed.
48

One division = 0.05mm. The auto feed has speeds of 0.07 or 0.14mm/rev. An integrated gearbox, for LH and RH threads, with change gears provides 19 metric pitches: 0.2 - 0.25 - 0.3 - 0.35 0.4 - 0.45 -- 0.5 - 0.6 - 0.7 - 0.75 - 0.8 0.9 -1.0 - 1.25 - 1.5 - 1.75 - 2.0 - 2.5 - 3.0mm. Imperial threads of 10 - 48 TPI are also possible. A rotating centre MK 2 and tailstock chuck of 10mm capacity. B12 taper, are included. Lead screw with acme thread 12 x 1.5., top slide 52mm and adjustable to turn tapers, with graduations up to 45. Tailstock with MK 2, 24mm diameter and 40mm travel (with graduations). Overall size approx. 900 x 400 x 300mm

Insertion tools and additional accessories for the PD 400 system are described on pages 50, 52 and 53.
Tool post
Including two holders. Provides quick tool changes with easy height adjustment. NO 24 415

Individual quick-change holder

A tool holder with two adjustable inserts is included as standard. Fits the tool post of PD 400. NO 24 416

With rotating centre MK 2 and tailstock chuck .

Large aluminium handwheels and adjustable steel scale 1 division = 0.05mm.

4 jaw chuck with independent jaws

Used to mount irregularly and asymmetrically shaped objects. Each jaw is adjusted individually and centering is thus achieved manually. Hardened, reversible jaws. Chuck diameter 100mm. NO 24 410

Cross-braced cast iron bed, wide-legged shape, and prism slides for apron and tailstock.

4 jaw chuck, self-centering

The jaws are not independently adjustable, i.e. they are self-centering.High accuracy. Chuck diameter 100mm. Note: Lathe PD 400 is now also available in CNC version with spindles running in ball bearings, stepping motor, control unit and easy to use WINDOWS compatible software. A special brochure is available. Feel free to ask for a copy. NO 24 408

Protected lead screw with 12 x 1.5 Acme thread.

(L x W x H). Weight approx. 45kg. Uses cutting tools 10 x 10mm.

Faceplate and clamps

This accessory is used in the place of the standard chuck and mounts larger and asymmetrical workpieces. Diameter of 150mm, with 2 through T-slots, as well as mounting clamps. NO 24 412 49

NO 24 400

Carefully thought-out accessories for the PD 400 lathe system solve milling and turning problems.

Fixed steady Splash guard and chip collecting tray for lathe PD 400 Made from 1.5mm steel plate, powder coated. A welded cover protects the motor. Mounting holes and raised base to secure the lathe are pre-drilled. Seeping through of coolant is impossible. Length 800 x width 270 x height 290mm. NO 24 402
Used on the PD 400 when turning long, slender work. Fitted directly to the bed-ways and is used when the tailstock support is inadequate. Maximum 50mm. NO 24 404

Collet set
For accurate use on round components. One each 2.0 3.0 4.0 5.0 6.0 8.0 10, 12 and 14mm are included. Concentric accuracy better than 0,002mm, much better than a chuck. One soft collet for making a custom size yourself. The included collet attachment is mounted in the place of the headstock chuck. Supplied in a wooden box.

Travelling steady
NO 24 419 Collets only Fitted to the carriage of the lathe. Indispensable when turning long, slender pieces. Maximum 50mm. NO 24 406

Mill/drill PF 400
Kit also includes the mounting flange and screws (the mounting surface on the PD 400 is already machined). Identical to the MICRO miller FF 400 (page 51), except that no compound table is supplied. Instead, a work surface of steel (150 x 110mm), with 3 milled T-slots for the standard T-nuts, is supplied. Two screws secure the work surface to the cross slide. NO 24 304

Centre turning accessory for the PD 400

Ideal when turning with highest possible accuracy. Supplied with 2 dead centres (MK2 and MK3), drive/face plate with 30mm bore as well as reducing bushes 30/20mm and 30/15mm. A threaded drive pin screws into the headstock flange and the drive plate. NO 24 414

Gear tooth chuck (10mm) with adaptor

Industrial quality, however not as accurate as the collets. With 10mm adaptor which fits into the 10mm collet. Includes the chuck key.

NO 24 110 50

Micro miler for precision work to 0.05mm accuracy ! Quiet, looking good and multifunctional.

MICRO miller FF 400

6 spindle speeds from 140 2,470rpm are achieved by means of a poly-V belt and pulleys.

Powerful, quiet capacitor motor (400W). Large handwheel and dial for height adjustment.

Headstock with scale, tilts and locks in position. The lockable quill has a 30mm travel. Switch for CW or CCW rotation.

Quill accepts collets (one each of 6 8 10 and 12mm are included).

Machined table (400 x 125mm), with 3 T-slots. Large handwheels with adjustable scales. 1 rev = 2.0mm, 1 coarse division = 0.1mm, 1 fine division = 0.02mm.

Important! Both the headstock and spindle can be locked in position when milling.

Clamps, cutters and workpiece are not included.

The headstock swivels through 360 indicated on a scale. The lockable quill has a travel of 30mm (via the handle and scale) and the throat distance is 100mm. Six spindle speeds of between 140 and 2,470rpm are achieved by means of pulleys and a poly-V belt. Cutting tools are secured in the 6, 8, 10 and 12mm collets provided. The headstock height is adjusted via the handwheel and dial (1 rev = 2.0mm) The solid, milled compound table has 3 T-slots for the 8 standard T-nuts. Other technical data: 220 240V, 400W, 50/60Hz. Spindle speeds of 140, 310, 480, 730, 1,140 and 2,470rpm. Column 45 x 500mm and table 400 x 125mm. X and Y travel amount to 225 and 80mm respectively. Footprint size 370 x 350mm. Overall height approx. 600mm. Weight approx. 47kg. Complete with KT 400. NO 24 308

Five piece collet set for millers PF 400 and FF 400

Includes 1 each of diameter 2.4 - 3.0 - 3.2 - 4.0 und 5.0mm, for milling cutters. Supplied in wooden box. NO 24 252

Fine feed for accurate adjustments

Quick and easy to install. The clutch system enables feed via either the drill handle or the handwheel. The handwheel has 0.025 graduations and may be set to zero. 1 division = 0.05mm. NO 24 254 51

Compound table KT 400

As described above but excluding the column and headstock. The 45mm bore also fits the precision drill stand BFB 2000. Weight 23kg. NO 24 303

Lathe accessories for PD 230/E and PD 400.

Nearly all the components are supplied in sturdy wooden boxes.

Universal dividing table UT 400
Facilitates the manufacture of odd-shaped objects. The table may be fixed horizontally or vertically. Drive takes place via the worm drive and in its 360 travel yields nearly all the divisions below 100. Supplied with 4 index plates: 27/42, 33/40, 34/39 and 36/38. Used to manufacture sprockets, gearboxes and drives, ratchets, cams, etc. The faceplate is not included. The taper is identical to the head spindle of the lathe. Supplied in wooden box with sliding lid. NO 24 421

Tool holder for rotary tools. For use on lathe machines.

Die holder for round dies, threads M 3 to M 10

Precision V-blocks

Made of steel 30 x 10 x 65 mm. This holder allows mounting of our rotary tool LB/E or IB/E to the tool post of the lathes PD 230/E and PD 400 for grinding or polishing purposes. MICROMOT collar size 20mm. Shaft 8 x 10mm for tool holders PD 230/E and PD 400. NO 24 098

Sizes: M 3 4 5 6 8 10. The straight shaft fits the holder 10mm when mounted in the tailstock of the PD 230/E or PD 400. The holder is held by hand while cutting the threads. Comes in a wooden box. NO 24 082

Used to clamp various work pieces. Made from hardened steel, precision ground in pairs. Four different depths of prism incisions V, all at 90. Size 50 x 30 x 30mm. The solid clamp and knurled knob ensure superb securing of the workpiece. Supplied in a wooden box with sliding lid. NO 24 262 2 pieces

Lathe practice for model makers

An interesting book by Tilman Wallroth, in which all important lathe components and working stages are dealt with in a practical manner. Included are many easily understood examples, clear and informative illustrations and many tips for use. Highly scientific advice was deliberately omitted. 230 pages, written without reference to trademarks. German only! NO 24 999

Radius cutting attachment

Precision vise

Usable on both the PD 230 and PD 400 systems is mounted on the cross slide in place of the tool holder. Cuts convex and concave shapes to depth of 1.0mm in steel as well as in non-ferrous metals and plastics. Radii or 3/4 spheres of diameter up to max. 32mm are possible Comes with one finishing cutter 8 x 8 X 80mm in a wooden box with sliding lid. NO 24 061

Milled in steel. May be used on its side and back. Jaw width of 60 mm, clamping capacity 42mm. Complete with securing bolts and packed in a wooden box with sliding lid. NO 24 255

52

Milling cutter set (2 - 5mm)

All cutters with 6mm shaft. Cutters of 2, 3, 4 and 5mm. Double fluted according to DIN 327. Made of HSS. Supplied in wooden box with sliding lid. NO 24 610

thick. May be used with PD 230/E, PF/FF 230, PD 400, PF/FF 400, face plate 24 412 and KT 150. Supplied in wooden box with sliding lid. For description of the smaller version No 24 256, see page 18. NO 24 257

Cutter set with tungsten inserts for PD 230/E and PD 400

Milling cutter set (6 - 10mm)

4 cutters 6, 7, 8 and 10mm. Four flute design according to DIN 844. Shafts 6.0 and 10.0mm respectively. Made of HSS. Supplied in wooden box with sliding lid. NO 24 620

Cutting tools of high quality cobalt HSS steel, ground.

Five piece set

One each roughing out, parting, finishing cut, left and right cutter. Supplied in wooden box with sliding lid. 8 x 8 x 80mm (for PD 230/E). NO 24 530 10 x 10 x 80mm (for PD 400) NO 24 550

Three piece centre drill set

Three holders (90mm long) 1. for roughing out; 2. for longitudinal work; 3. for 90mm boring bar, holes from 12mm. Standard tungsten inserts, 55, plated (commercially available version). Three additional inserts securing screw and key TX 8 are included. NO 24 555 8 x 8mm (for PD 230/E) NO 24 556 10 x 10mm (for PD 400) Tungsten disposable tips For the holders as described above. NO 24 557 Ten piece set.

Made of HSS steel. Din 333 (type A) 60. Complete set centre drills with sizes of 2.0 - 2.5 and 3.15mm. NO 24 630

Three piece thread cutting set

Arbor (A)
A B For HSS gear cutters. 16mm-fitting. Cylindrical shaft 10mm. NO 24 425 One cutter for external thread (ground to 60, metric) one for internal thread, one general cutting. Supplied in wooden box with sliding lid. 8 x 8 x 80mm (for PD 230/E). NO 24 540 10 x 10 x 80mm (for PD 400) NO 24 552

HSS boring tool set, 6 pieces

HSS gear cutters (B)

Module 0.5 bore. NO 24 426 NO 24 427 NO 24 428 NO 24 429 NO 24 430 NO 24 431 x 40mm outside diameter. 16mm No 1 (12-13 teeth) No 2 (14-16 teeth) No 3 (17-20 teeth) No 4 (21-25 teeth) No 5 (26-34 teeth) No 6 (35-54 teeth)

One each cutter for 60 degree (metric) and 55 degree (Whitworth) inside threads, 1.3mm 2.65mm and 4mm. Shaft of 6mm. Length 95 mm. The cutters are held by a tool holder that mounts to the tool post of either the PD 230/E or PD 400. Comes in a wooden box. NO 24 520

Parting tool holder and tool

Used in the PD 400 quickchange system. Used to part stock and cut slots. The 12 x 3 x 85mm HSS tool contains cobalt..

Edge finder set

Step clamp set, milled steel

NO 24 417

Spare tool for parting tool holder

Consists of 2 step blocks and 2 clamps, 2 nuts, 2 T slot nuts (B = 7mm, E = 12mm, D = 4mm, C = 7.2mm). Secures objects to approx. 35mm As described above. NO 24 554

Used for fast and accurate location of starting point of workpieces with respect to the machine spindle on milling machines. Size 6 x 6 x 50mm and 6 x 5 x 75mm. Neatly packed in a wooden box. NO 24 434
53

Complete work centre for milling and drilling: mill/drill unit BFB 2000, compound table KT 150 and mill/drill system BFW 40/E.

Mill/drill system BFW 40/E, with controller for speeds of 900 6,000rpm.
The triple ball bearing armature provides direct drive (no gearing). This yields virtually vibration-free operation and extremely high spindle accuracy. Die-cast aluminium head with spindle neck of 43mm (European standard). Large, easy to use switch with emergency function. Chart indicates optimum speeds for milling and drilling of various materials. Other technical data: Control unit with full wave electronics for 220 240V, 40VDC secondary voltage. Power consumption up to max. 250W. Spindle speed infinitely variable between 900 and 6,000rpm. Complete with triple slit. hardened collets covering 2.35 3.0 3.2 4.0 5.0 and 6.0mm. as well as 2 spanners. NO 20 165

Note: The motor operates at 40V, supplied from the power pack/controller. At this level, the control characteristics are ideal and yield high torque, even at lower speeds. (The compound table, drill stand and step clamps are not included.)

Die-cast aluminium compound table KT 150

With precision milled dovetail slides, thus also suitable for metal work. For routing, milling, slotting of steel, non-ferrous metal, plastic and wood. Each slide provided with locking screws. Dovetail fittings/gib strips adjustable to eliminate play. Feed adjustments by means of 2 handwheels with adjustable, graduated dials (one revolution = 2 mm, one graduation = 0.05mm). Machined table, 3 T-slots for fastening machine vices and clamping kits. Fence supplied with pre-drilled positioning holes, including 45, fastening screws and clamp used for routing. Table 200 x 200mm. Maximum travel 150 x 150mm. Overall height 75mm. Weight 4.9kg. The clamp shoes right in the illustration are not included. NO 20 150

BFB 2000, see page 55

54

High strength precision die-cast aluminium, with precision milled dovetail slides.

Mill/drill unit BFB 2000 For standard drills with 43mm spindle neck.
With scale Horizontal application

Head feed adjustable to fine feed by means of lever

Head may be tilted through 90

e.g. for slot milling

Head with precision milled dovetail slide and may be tilted through 90 to give all-round versatility: diagonal drilling, versatile without need of special milling bits, milling diagonal slots. Fine feed selectable, allowing fine head feed for milling. With dial and depth scale. Geared rack and pinion feed for effortless drilling. 45mm diameter drill column, 500mm long. Approx. 140mm throat (column outside to tool centre). 65mm stroke. Machined, solid base plate approx. 200 x 200mm. All drills with standard 43mm spindle collars may be utilised directly: BOSCH, AEG, FEIN, METABO, KRESS, BLACK & DECKER, SKIL. Weight approx. 6.5kg. NO 20 000

Adjustable zero position for fine feed.

Milled, adjustable dovetail slide.

Selectable fine feed with lever.

HSS milling cutter set (2 - 5mm) Ideal for mill/drill system BFW 40/E
HSS, all with 6 mm cylindrical shaft. Consists of cutters of 2, 3, 4 and 5mm diameter. Double fluted, according to DIN 327. Made of HSS. Supplied in wooden box with sliding lid. NO 24 610

Clear, easily legible depth scale.

Steel step clamp set

Consists of 2 step blocks and 2 clamps, 2 nuts, 2 T-slot nuts. For securing objects to approx. 35 mm high. May be used with compound table KT 150 and millers PF 400 and FF 400. Neatly packed in a wooden box with sliding lid. 45mm diameter column, 500mm long. Stable, machined work top with T-slots.

NO 24 257

For more accessories, see page 53!

55

PROXXON GmbH Im Spanischen 18 24 D-54518 Niersbach/Germany Tel. +49-6575-78-0 Fax +49-6575-78-105 e-mail: [email protected] www.proxxon.com

We reserve the right to modify any technical specification as a result of improvement.

Steinicke, Wittlich

by PROXXON S.A., L-6868 WECKER

NO 95 310/PR210207220.5J