Scribd
Upload
28 views

Employment Office (EOF) Employment Office (EOF) Employment Office (EOF) Employment Office (EOF)

The EOF Zone is intended for office and employment uses combined with limited residential and commercial uses. Density is calculated as a floor area ratio between 0.5 to 4.0 and height limits range from 35 to 200 feet. Residential uses are generally limited to 30% of total allowed density. Development standards differ under the standard and optional method, with the optional method allowing greater density and flexibility if additional public benefits are provided. The EOF zone will be mapped showing the specific maximum density and height allowed for each property.

Uploaded by

Planning Docs
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
28 views

Employment Office (EOF) Employment Office (EOF) Employment Office (EOF) Employment Office (EOF)

The EOF Zone is intended for office and employment uses combined with limited residential and commercial uses. Density is calculated as a floor area ratio between 0.5 to 4.0 and height limits range from 35 to 200 feet. Residential uses are generally limited to 30% of total allowed density. Development standards differ under the standard and optional method, with the optional method allowing greater density and flexibility if additional public benefits are provided. The EOF zone will be mapped showing the specific maximum density and height allowed for each property.

Uploaded by

Planning Docs
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Employment Of fice (EOF)

Intent
The EOF Zone is intended for office and employment activity combined with limited residential and neighborhood commercial uses. Building form standards allow flexibility in building, circulation, and parking lot layout. Residential uses are generally limited to 30% of the total allowed density in a given area. Transit options often include light rail and bus.

Overview of Development Standards Density and Height Limits


Density in the EOF zones is calculated as an allowed floor area ratio (FAR). FAR is the ratio of the total floor area of buildings on a property to the size of that property. Each EOF zone has a unique sequence of maximum total FAR and maximum height (H) subject to the limits specified in the table below.
Zone EOF Total FAR (max.) 0.5 to 4.0 Height (max.) 35 to 200 Height (max.) Residential Uses (max. % of permitted FAR) Building Coverage (max. % of lot area) Public Use Space (min. % of site area) Site Plan Required Public Benefits Required

The EOF zone has different development standards under the Standard and Optional Method. Standard Method is limited as indicated in the table below, or as indicated on the zoning map, whichever is less. Optional method is limited to the density and height indicated on the map.
Development Standard
Total FAR (max.)

Standard Method
The greater of 1.0 or 10,000sf of GFA 35 to 200' 30%

Optional Method
0.5 to 4.0 35 to 200' 30%

Neighborhood Compatibility
When an EGR property abuts an Agricultural, Rural Residential, or Residential Detached property that is not improved with a commercial, industrial, or utility use, any building must: 1. Have a setback at least equal to the setback required by the abutting zone or the buffer width required for the applicable building type, whichever is greater

90% (for select building types) 10% (for select building types with lot area >10,000sf) Yes, if various conditions apply No

90% (for select building types) 0 to 10% (plus incentives for additional space ) Yes, plus a Sketch Plan Yes

Mapping the EOF Zone


The EOF zone will be applied on the Zoning Map that will show, for each property classified, its zone, maximum density and maximum height. For example, an EOF zone with a maximum total FAR of 3.5 and a maximum height of 140 feet would be mapped as the following:
EOF-3.5 H-140

2. Not project beyond a 45 degree angular plane over the subject property measured from the height allowed in the abutting zone at the setback line Example determined above Proposal based on September 2012 Staff Draft

www.zoningmontgomery.org

You might also like