Scribd
Upload
4K views

Comparison of Ev2 and Evd

This document provides correlations between static deformation modulus (Ev2) measured via plate loading tests and dynamic deformation modulus (Evd) measured via light drop weight testing on road construction layers. It also suggests limit values for Evd based on requirements for Ev2 in local regulations. Tables show standard values for assigning compaction levels and deformation moduli to different soil types at various construction depths.

Uploaded by

wolf0880
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views

Comparison of Ev2 and Evd

This document provides correlations between static deformation modulus (Ev2) measured via plate loading tests and dynamic deformation modulus (Evd) measured via light drop weight testing on road construction layers. It also suggests limit values for Evd based on requirements for Ev2 in local regulations. Tables show standard values for assigning compaction levels and deformation moduli to different soil types at various construction depths.

Uploaded by

wolf0880
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Only for information, specification without guarantee

Correlations Ev2 / Evd Ev2 - deformation modulus (static plate loading test) Evd - dynamic deformation modulus (Light Drop Weigth tester) Requirement of the ZTVE-StB76 E v 2 in MN / m 180 150 120 100 80 60 45 20 Suggestion for new limit values E v d in MN / m 80 70 55 45 40 30 25 15

Appendix to the regulation "ZTVE-StB94, Abschn 3,4,7,2, dec. 94" The requirements mentioned refer to the 10% minimum quantile of the dynamic deformation modulus, if no other object-oriented correlations are present for the static deformation modulus Ev2: For road superstructure of the building class SV, I to IV on nonfreezing subgrade or substructure a dynamic deformation modulus of at least Evd = 60 MN/m with the building class V and VI Evd = 50 MN/m is on the subgrade level required. If these requirements can be fulfilled only by compacting the subgrade layers, for a building class SV or I to IV on the subgrade level a dynamic deformation modulus of at least Evd = 50 MN/m and with a building class V and VI Evd = 40 MN/m is sufficient. In the case of doubt the dynamic deformation modulus is measured on the subgrade level after installation of the road base in boreholes or in dig holes. With frost-sensitive sub-layers a dynamic deformation modulus of at least Evd = 25 MN/m is on the subgrade level required (in case of soil exchange, with the appropriate response time in mind: Evd = 30 MN/m )

Only for information, specification without guarantee

Bearing capacity checks suggested appendix to Regulation: "Roads and earthwork ZTV E-STB 76" Construction layer Subgrade level (planum) Condition Ev2 (MN/m) >45 >45..20 <2,0 <3,0 <4,0 Ev1/Ev2 Evd Dpr % Proctor

generally fine-grained mix-grained Rock pourings Gravel GW (far graduated) Gravel GI (intermittently) Gravel GE (narrow graduated) Sand SE-SW-SI

>25 >25..15

coarse grained soils

>120

>55

>103

>100 >80 >80

>45 >40 >40

>100 >97 >100

>60 >45

>30 >25

>97 >95

Standard values for the assignment of compaction level Dpr (Proctor) and deformation modulus Ev2 sub layers Level of compaction Dpr in % 100 98 97 100 98 97 Evd Deformation modulus Ev2 in MN/m MN/m 100 > 80 > 70 80 70 60 45 40 35 40 35 30 Ev2/Ev1

GW, GI

2,3 2,5 2,6

GE, SE, SW, SI

requirement of the ZTVE STB 76 Ev2 in MN/m 180 150 120 100 80 60 45 20

Limit values Evd in MN/m 80 70 55 45 40 30 25 15

Only for information, specification without guarantee

Baustoff und Bodenpruefstelle Wetzlar Fill from Quality assurance of Light drop in accordance with line ditches the compaction with the weight tester TP BF StB part of 8.3

sub-layer

DIN 18196 GW, GI (e.g. stone soil or mineral mixture 0/32) GE, SE, SW, SI

Reference values for the relation of Degree of compaction (Proctor) Dpr Dynamic deformation modulus Evd 1)Suggestion for Appoximate values Required the relation of for the relation compaction in Evd to Ev2 to Dpr different levels (in accordance (ZTVE StB 94 of depth with FGSV working Tab. 8) (ZTVT StB 95 *) group "testing (ZTVE StB 94) devices", status Okt.96) Degree of Deformation Deformation compaction modulus modulus Dpr Ev2 Evd % MN/m MN/m 103 100 98 97 100 98 97 100 97 95 120 100 80 70 80 70 60 45 30 20 60 50 40 35 40 35 32 25 15 10

mixed- and finegrained soils

1) These reference values are approximate values for the proof of the achieved compaction in accordance with. ZTVE StB 94, exp. 14.2.5.. These reference values can be agreed upon between contractors and orderers.

You might also like