Forming and Shoring Catalog
Uploaded by
lucnewarchiForming and Shoring Catalog
Uploaded by
lucnewarchiFORMING AND SHORING SYSTEMS
OvER 90 YEARS OF ExPERIENCE AND qUALITY PRODUCTS
MASCO
MAS ONS S U P P L Y
MASONS SUPPLY COMPANY | WWW.MASCO.NET Oregon (800) 537-3407 Washington (800) 537-6216
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland Port Orchard | Ridgefield | Salem | Seattle | Tacoma | Wilsonville | Woodinville
OVER 90 YEARS
OF EXPERIENCE AND QUALITY PRODUCTS...
MASCO
TABLE OF CONTENTS
M ASO NS SUPPLY
DETAIL & DRAFTING ......................................... 2-3 vERTICAL FORMING SYSTEMS....................... 4-31 FRAMAX XLIFE ...................................................4-5 FRAMI .................................................................6-7 MF 240 CLIMBING FORMWORK .......................8-9 ALISPLY.........................................................10-13 STEEL PLY ......................................................14-15 ALUMINUM BEAM GANGS ................................16 WONDERWALE SYSTEM ................................17-19 ELEVATOR SHAFT FORMING .........................20-21 FLEX-FORM ...................................................22-23 ADJUSTABLE RADIUS WALER .............................24 FORM LINER ........................................................25 MAX-A-FORM ..............................................26-27 ROLL BACK .........................................................28 JOB BUILT ............................................................29 BRACES ...............................................................30 TILT-UP .................................................................31 HORIZONTAL FORMING AND SHORING SYSTEMS ............................. 32-41 DECKFAST ....................................................32-33 HV-DECK/PANEL SYSTEM .............................34-35 MEGA SHORE ................................................36-37 SHORING STEEL ..................................................38 POST SHORES......................................................38 SOLDIER BEAM ...................................................39 OVERHANG BRACKETS .....................................40 SAFETY RAIL BRACKETS ......................................41 COLUMN FORMING .................................... 42-47 STEEL PLY ...........................................................42 ADJUSTABLE STEEL..............................................43 MAX-A-FORM ...................................................44 CIRCULAR STEEL .................................................45 LOCKFAST COLUMN CLAMP ............................46 LOK'N SQUARE COLUMN CLAMP ....................47 CUSTOM MANUFACTURING ............................. 48 PRE-ASSEMBLY ................................................... 49 PRODUCT INFORMATION .................................. 50 FORMING FACILITIES ......................................... 51
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
MASCO
M A SO NS SUPPLY
WE SERVE PROFESSIONAL TRADES ONLY
Masons Supply Company offers the largest inventory of concrete and masonry accessories in the Northwest. With the addition of concrete forming systems, for sale and rent, Masons is the source for all your concrete needs. Masons has two major distribution facilities located in Portland, Oregon and Woodinville, Washington. We also have twelve warehouse outlets and one large multi-function concrete forming and shoring facility in Ridgefield, WA. Our forming and shoring facilities offer and stock the best selection of concrete forming and shoring systems in the western United States. Modular hand set panels, all steel faced panels, all steel round and radius forms, aluminum beam, European clamp systems, ply wood faced gang forms for straight and radius walls. All steel or aluminum tube frame shoring systems. Hand set plywood forming systems are also available. Masons has forming systems for all heavy and light requirements. Our forming department can also manufacture custom tailored forms and accessories to fit any job requirements. Our two full service distribution centers make it possible to pre-assemble forming systems for delivery anywhere in North America, Canada, Alaska, Mexico and the Pacific Rim. Masons provides products to contain and enhance the designed properties of liquid concrete while it hardens. We also provide products and technical service for the repair, restoration and protection of existing concrete with the most efficient economical and technologically advanced products and services available. Today Masons is the premier specialty company for concrete and masonry product in the Northwest. Our only business is servicing professional contractors on all commercial, industrial and infrastructure projects. Masons Supply Company, a locally owned and operated business, is growing with the Northwest to better serve our customers. Were proud of our history and reputation for excellence.
MASONS SUPPLY
EXPERTISE
PROBLEM SOLVING
MULTIPLE LOCATIONS
FAST DELIVERY
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
DETAIL & DRAFTING
Having top quality products is only part of Masons story. We have the service and expertise to help you get your job done on time and on budget. Masons factory trained specialists work with your project personnel every step of the way. When you need building materials and forming systems, Masons can help you select the best products for your requirements and offer on-site technical assistance, as well as specialized equipment. Our experienced drafting and sales staff, complete with multiple autocad stations, are available to prepare clear and accurate computer generated sales lay-out and detail drawings to fit your projects' requirements. Before you turn the first shovelful of dirt, Masons can be on site, unloading geotextile fabric and safety fence. Our forming department can put the final drawing together on your concrete forming layouts. Masons delivers only the best nationally recognized products, and we get it to you on time. Masons has made the investment in distribution facilities, inventory and trucks to ensure you get what you need when you need it. Masons is committed to supplying professional contractors with the best service and products available.
MASCO
MASON S S UPPL Y
DETAIL & DRAFTING
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
MASCO
M A SO NS SUPPLY
FRAMAX XLIFE
Framax Xlife is a framed formwork system that was developed specially to meet US formwork requirements. It is used for gang forming using the crane. Framax Xlife assembles using only a hammer and two lightweight clamps. Gang assembly can easily approach 100 sq. ft. per man-hour. Xlife plywood gives an excellent finish and lasts two times longer then all birch plywood. Modular and symmetrical panels ensure the best possible utilization of formwork. The special pattern of holes makes these panels ideal for the economical forming of outside corners, wall connections, bulkheads & columns.
VERTICAL FORMING SYSTEMS
FRAMAx xLIFE
Straight comparison shows that Framax Xlife nails much better than conventional formwork panels.
COLUMN FORMWORK MADE UP OF FRAMAx xLIFE UNIvERSAL PANELS
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
VERTICAL FORMING SYSTEMS
CASCADE GRAIN ETHANOL PLANT CLATSKANIE, OR
CLIFFSIDE MODERNIZATION PLANT, NORTH CAROLINA
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
MASCO
M A SO NS SUPPLY
FRAMI
Frami is a lightweight clamp system designed in feet and inches. It is comprised of high-performance safety and workplace accessories. It is the complete system for walls, columns and footings. The Frami panels are lightweight and easy to handle, so they can be erected very quickly by hand. Frami lets you form extremely quickly and economically, without the use of a crane. On sites with a crane, it is also possible to lift several panels at a time, in a gang-form. The ingenious modular design (with six different widths and three different heights of panel) makes for optimum adaptability to all job site conditions. The ingenious modular design gives you unlimited possible combinations, in both width and height. You can use the panels either upright or horizontal, and the 6" increment together with the steel fillers (2", 1", 1") gives you optimum adaptability of the formwork to the dimensions of the structure, at all times.
VERTICAL FORMING SYSTEMS
FRAMI TIE HOLE PROTECTION
FRAMI TIES
Frami uses a lightweight high strength taper tie 1"-" with " ends.
STURDY, TORSION-RESISTANT STEEL FRAMES
FRAMI CAN BE USED FOR COLUMNS
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
VERTICAL FORMING SYSTEMS
QUICK PANEL CONNECTION
Save time in assembly with only 3 lightweight Frami clamps per 9 ft. vertical joint. Just one blow with a hammer and the panels are jointed and aligned.
GRAND MOUNT WASTEWATER TREATMENT PLANT WASHINGTON
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
MASCO
M A SO NS SUPPLY
MF 240 CLIMBING FORMWORK
The MF 240 is the crane-lifted climbing formwork for structures of any shape and any angle of inclination. Designed with a high load-bearing capacity, it is built for precision construction and efficient operations on all high-rise building and high wall applications. Components are available to accomodate any angle of wall inclination. Formwork and climbing scaffold are connected to each other, so the entire unit can be raised in a single crane lift, reducing crane time to an absolute minimum. The MF 240 Climbing Formwork is ideal for all residential and industrial high-rise projects, bridge piers, silos, and any high multi lift structures.
VERTICAL FORMING SYSTEMS
RIvERPLACE - CHICAGO, ILLINOIS
WORKING WITH MF 240
Strong and durable anchor components ensure the secure connection between structure and climbing formwork.
Caption
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
MF 240 CLIMBING FORMWORK
1
MF TRAvELING UNITS
The main operating deck platform is 8' wide for safe and convenient formwork operations. The formwork can roll back 2'-6" for easy cleaning of the formwork and for working on the reinforcement.
VERTICAL FORMING SYSTEMS
MF CLIMBING BRACKETS
Combines with all DOKA wall formwork systems. High load-bearing capacity 11,250 lbs. per climbing bracket. Accessories available to accomodate an angle of inclination 15 from vertical. Enables climbing formwork to pass concrete lips projecting up to 9-".
WORKING PLATFORM BRACKETS
Modular principle for versatility: These brackets can be used as pouring, intermediate and suspension platform brackets.
ADJUSTABLE ANGLE OF INCLINATION
On structures with vertical walls, the MF 240 climbing bracket permits pouring sections up to 20' high. Pressure spindles are available to enable the MF 240 climbing formwork to adjust to structures with an angle of inclination that changes for each lift. When the structure's angle of inclination is constant, pressure struts keep the formwork at exactly the right angle up to 15 when using the vertical profile MF 160.
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
MASCO
M A SO NS SUPPLY
ALISPLY
The Alisply system is a high strength concrete forming system designed for fastpaced gangform operations. The clamp style connections make setting up gangs fast and efficient. Alisply has a long service life and reduces your total applied forming costs. Alisply forms can be oriented horizontally or vertically, even within the same gang. Alisply panels and fillers provide strength, durability and the finish needed for most gangforming applications.
VERTICAL FORMING SYSTEMS
FORT LEWIS, WA
90 DEGREE CORNERS
CAPITAL MALL - SALEM, OR
10
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
VERTICAL FORMING SYSTEMS
MCGUIRE RESERvOIR - CARLTON, OR
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
11
MASCO
M A SO NS SUPPLY
VERTICAL FORMING SYSTEMS
SEATAC, WA
AS HIGH WALL POURS
EASTSIDE C.S.O. - SWAN ISLAND
12
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
ALISPLY (continued)
VERTICAL FORMING SYSTEMS
EASTSIDE C.S.O. - SWAN ISLAND
3' - 3" (LM)
9' - 10" (3M)
100x300
100x300
HAWKS PRAIRIE WWTP - LACEY, WA
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
13
MASCO
M A SO NS SUPPLY
HAND SET
STEEL-PLY
VERTICAL FORMING SYSTEMS
Steel-Ply is today's superior handset. The reusable, modular, high-carbon reinforced steel frame means edges stay straight and corners stay square, so panels are quickly aligned and easily stacked. The system is sold and rented for use in the forming of concrete walls and columns. All these factors combine to create a 1,000 psf rated system that will save you time in setup, last longer and give you better results. Panels and Fillers There are 80 sizes available for fast erection of virtually any layout by combining panel and filler sizes for erecting vertically or horizontally. This eliminates the sawing, drilling, measuring and nailing common with job-built forming. Steel-Ply provides quick and easy handling, no tops, bottoms, lefts or rights making for improved labor productivity.
FOUNDATION - ALBANY, OR
HANDSET WALL FORMING
RETAINING WALL - BEAvERTON, OR
DETENTION vAULT - WOODINvILLE, WA
SHEAR WALL - TROUTDALE, OR
14
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
GANGED STEEL-PLY
The versatility of the Steel-Ply system lends itself to gang forming crane set applications using wood, steel or aluminum channels for waling and threaded rod or round wire tie systems for tieing.
MASCO
MASON S S UPPL Y
VERTICAL FORMING SYSTEMS
PULP MILL - LONGvIEW, WA
CONCRETE TANKS & RINGWALLS
RING WALL - ANACORTES, WA
The productivity of the system for forming round radius tanks and walls is unmatched both in speed and weight as well as ease of erection and stripping.
WWTP - LYNDEN, WA
PUMP STATION - ISSAqUAH, WA
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
15
MASCO
M A SO NS SUPPLY
ALUMINUM BEAM GANGS
VERTICAL FORMING SYSTEMS
The Aluminum Beam Gang Form System offers unsurpassed forming versatility and a host of unique features, benefits and advantages. At the heart of this system is our computeroptimized aluminum beam featuring an extremely high strength-to-weight ratio. The Aluminum Beams or Joists are fastened to steel or aluminum walers by means of our unique beam attachment clamps. A suitable plywood is attached to the resulting rigid, compact and lightweight lattice to create the basic gang form. The use of any of the accessories available enhance the versatility of the Aluminum Beam Gang Form to achieve a wide range of forming conditions. Because Masons has several aluminum beam and waler sizes and three capacities of ties available for use on the Aluminum Beam Gang Form, a wide variety of beam spacings and tie patterns can be utilized.
MIDDLE SCHOOL - SALEM, OR
DAM - BONNEvILLE, WA
DIGESTER TANK - vANCOUvER, WA
HIGH SCHOOL - vANCOUvER, WA
16
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
WONDERWALE SYSTEM
The system that bridges the gap between all-wood forms and all-steel panels combines the best of both worlds into one modular package. The system merges the versatility of dimensional lumber, aluminum joists, or LVL lumber. In addition, it is lighter weight per square foot and it has simplicity of on site modification, large tie spacing, modularity and ease of accessory attachment of steel forms. The welded end plate and 6 bolt full moment connection eliminates loose splice channels and reduces hardware. The double 6" channel webs are punched on 3" centers, and the flanges are drilled on 12" centers to provide for positive connections and accessory attachments.
VERTICAL FORMING SYSTEMS
WWTP - SEATTLE, WA
TACOMA NARROWS BRIDGE
LIBRARY - CORvALLIS, OR
SHEAR WALL - PORTLAND, OR
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
17
MASCO
M A SO NS SUPPLY
WONDERWALE SYSTEM
VERTICAL FORMING SYSTEMS
TACOMA NARROWS BRIDGE - TACOMA, WA
18
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
VERTICAL FORMING SYSTEMS
ANCHOR BLOCK FORMWORK - TACOMA NARROWS BRIDGE - TACOMA,WA
6 EACH " 2" SPEED BOLT AND NUT
DBL. C6 PAFCO WALE PAFCO C6 WALE CONNECTION
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
19
MASCO
M A SO NS SUPPLY
ELEVATOR SHAFT FORMING
VERTICAL FORMING SYSTEMS
The retractable inside corners will allow the four inside forms of a stair or elevator shaft to move as one unit. The Safety-Platform will support the weight of the forms and workmen while the stripping procedure is completed. The collapsed inside shaft forms and platform are moved up together to the next lift position in one unit. When the platform locks into place at the next lift position, the crane can be released. The workmen can then expand the inside form at the collapsible inside corner.
HORIZON HOUSE - SEATTLE, WA
20
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
VERTICAL FORMING SYSTEMS
COURTHOUSE - EUGENE,OR
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
21
MASCO
M A SO NS SUPPLY
FLEX-FORM
Flex-Form is a system designed to meet engineers specific needs for concrete placement. Flex-Form gives you all the strength and versatility you need. Having 4" deep vertical stiffeners with a 3/16" steel skin plate provides a 1,000 psf system that handles any radius 5' and over. Pre-Rolled Steel Ribs Set the Radius Factory-rolled top and bottom ribs bolt to flexible panels to shape and securely hold the form in the radius you require. Panels conform precisely to the radius of the ribs - this design assures that you'll get the correct radius every time. And with a straight rib, you can produce a straight wall if needed. Fast and Simple Erection Panels are delivered to the job site pre-assembled to your required radius. There are no expensive templates to build; no need to torque bolts; just begin erection labor.
HIGH SCHOOL - SEATTLE, WA
VERTICAL FORMING SYSTEMS
INDUSTRIAL TANK BASE - ALBANY, OR
DIGESTER TANK - CORvALLIS, OR
22
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
VERTICAL FORMING SYSTEMS
DIGESTER TANK - CORvALLIS, OR
WWTP - WOODBURN, OR
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
23
MASCO
M A SONS SUP PLY
PRE-ROLLED ADJUSTABLE STEEL WALERS
ADJUSTABLE RADIUS WALER
VERTICAL FORMING SYSTEMS
The Pre-Rolled Adjustable Steel Walers used horizontally with vertical aluminum joists or wood joists to form round tanks and curved walls. Features: Pre-Rolled to 45'-0 radius Adjusts down to 30'-0 radius Adjusts out to 80'-0 radius All Hardware ATTACHED
CLARIFIER TANK - WILSONvILLE, OR
24
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MAS O N S SU P P L Y
FORM LINER
Masons offers a complete line of Form Liner, including plastic and elastomeric products for use in the forming of textured surfaces in concrete.
VERTICAL FORMING SYSTEMS
TRANSIT CENTER - BEAvERTON, OR
SPS PLASTIC
SPS Plastic
Dura-Tex Dura-Tex Form Liner is a medium use elastomeric form liner. It possesses all the qualities of premium elastomeric form liner, but is slightly less durable. Dura-Tex Form Liner is ideal for projects that require about 40 reuses. The ruggedness and tear strength of Dura-Tex Form Liner allows stripping from complex designs without causing damage to the form liner material or the architectural concrete. Elasto-Tex
SPS Plastic Form Liner is manufactured from polystyrene plastic and thermoformed to provide the contractor with an inexpensive alternative for single use applications. It provides a textured concrete surface, in a limited application, at an affordable price. SPS Plastic Form Liner has been particularly useful in tilt-up construction because a major portion of the work calls for a single use material. ABS Plastic
DURA-TEX
ABS Plastic Form Liner is made from premium quality ABS material that provides superb durability and excellent overall performance. ABS Plastic Form Liner exhibits good impact resistance and contains an ultraviolet shielding compound to reduce the damaging effects of prolonged sunlight. ABS Plastic Form Liners are available in patterns that provide wood, rib, fractured rib, brick and many other textures.
ABS PLASTIC
ELASTO-TEX
Elasto-Tex Liner is a pure urethane material that provides consistent pattern reproduction, even after many uses. The applied cost of Elasto-Tex Form Liner becomes a distinct advantage for those projects that require 100 uses and more.
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
25
MASCO
M A SO NS SUPPLY
WALL & COLUMN FORMING
MAX-A-FORM
VERTICAL FORMING SYSTEMS
The all steel, self-spanning, forming system for bridge pier cap applications. The Max-A-Form system combines a 3/16" steel face with heavy duty steel crossmembers to support higher pour rates. Panels up to 8' wide are rated at 1,500 psf, 9' and 10' are 1,200 psf and 12' wide panels at 1,000 psf. The strength of this design virtually eliminates the need for walers and dramatically reduces tie requirements.
UNIvERSITY - SALEM, OR
PIER CAPS
LIGHT RAIL - PORTLAND, OR
INTERCHANGE - BELLEvUE, WA
26
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
BRIDGE & HIGHWAY COLUMN FORMS
MASCO
MASON S S UPPL Y
MAX-A-FORM (continued)
MAX-A-FORM is a gang form system that allows faster placement, pours and resetting. The strong, all-steel design allows forms to be set in larger units. Fewer crane picks are necessary and cycling time is optimized on repetitious pouring applications. Gang size is limited only by available crane capacity.
BRIDGE PIER - TACOMA, WA
VERTICAL FORMING SYSTEMS
INTERCHANGE - BELLEvUE, WA
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
27
MASCO
M A SO NS SUPPLY
ROLL BACK
VERTICAL FORMING SYSTEMS
Productive Roll Back system for mid-rise and high-rise concrete structures and shear walls. Roll Back is an engineered "jump form" system designed for use on elevated concrete forming applications. The system supports any gang form system, including Steel-Ply, MAX-A-FORM, and Aluminum Beam Gang. The Roll Back system consists of a frame and carriage assembly suspended from jump shoes and anchored in the concrete. The carriage allows the gang form to be retracted and cleaned without any crane assistance.
MEDICAL BUILDING - PORTLAND, OR
28
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
JOB BUILT
Masons offers for rent or purchase a comprehensive line of on site job assembled concrete forming systems for construction of walls - straight, round, curved or battered and beams and columns. Utilize " plyform, 2x or 4x studs and wales can achieve architecturally smooth concrete surfaces.
VERTICAL FORMING SYSTEMS
RETAINING WALL - SALEM, OR
FOUNDATION - SEATTLE, WA
Masons offers a complete package of thru wall connecting tie systems; pencil rod and rod clamps, loop ties and cam locks, taper ties and wing nuts, or snap ties and Jahn brackets. Each system has its own unique features and benefits.
TIE SYSTEMS
SNAP TIES
For quick turn around time, Masons manufactures its own snap ties ranging in wall thickness from 4" to 128". Available with 1" setback plastic cones for easy break back and an optional waterseal neoprene washer. All Masons snap ties are manufactured to demanding tolerances, with thorough testing from raw material to finish product.
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
29
MASCO
M A SO NS SUPPLY
ADJUSTABLE PIPE BRACES
BRACES
VERTICAL FORMING SYSTEMS
Masons offers a complete line of inserts, lifting hardware and adjustable pipe braces used in the tilt-up method of construction. Telescoping heavy steel braces are available in several sizes to provide 76" to 320" adjustment in length. Ductile cast iron brackets at both ends of the brace are slotted to receive a 3/4" diameter bolt. A positive stop at the slotted hole prevents the brace from moving sideways.
HIGH TECH BUILDING - CAMAS, WA
30
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
TILT UP
Concrete elements are formed on a building site for their given thickness. These elements are usually formed on a slab of concrete that is the building floor or a temporary concrete casting surface near the building footprint. The elements (generally wall panels) are allowed to cure and then are tilted from horizontal to vertical with a crane and braced into position. The Tilt-Up Lifting System is a quality high strength, economical method for lifting, handling and placing tilt-up wall panels.
TILT UP LIFTING SYSTEM
OFFICE BUILDING - ARLINGTON, WA
PUBLIC STORAGE - KENMORE, WA
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
31
MASCO
M A SO NS SUPPLY
DECK FAST
DeckFast, formerly Topec Deck System, is a modular slab formwork system used for commercial and industrial applications. The system will support slabs up to 22" and heights up to 19' above the floor or ground. The basic DeckFast system consists of tubular post shores that are adjustable to 18', bearing supports and modular forming panels. The uniqueness of this system lies with bearing supports that capture and support corner clusters of four panels. When the bearing supports are fastened to flat top post shores, the panels and post shores can be erected individually from below, simplifying the erection process.
COLUMN FILLER DETAIL
HORIZONTAL FORMING & SHORING SYSTEMS
RETIREMENT CENTER - vANCOUvER, WA
STUDENT HOUSING - PORTLAND, OR
32
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
HORIZONTAL FORMING & SHORING SYSTEMS
BREWERY BLOCK 3 - PORTLAND, OR
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
33
MASCO
M A SO NS SUPPLY
HV-DECK/PANEL SYSTEM
The HV decking system provides a rapid, versatile and efficient means of casting on-site concrete decks in a wide variety of applications. Lightweight and easy to use, HV comprises of just four main components and can be erected and dismantled by a team of two operatives without the need for special tools, making it one of the least labor intensive systems on the market. Hv Components The HV panel decking system comprises 4 main components: 1. HV Prop 2. Drop Head 3. Primary Beams 4. Secondary Beams
CONDOMINIUM BUILDING - PORTLAND, OR
HORIZONTAL FORMING & SHORING SYSTEMS
CONDOMINIUM BUILDING W/ Hv PANELS
TITAN Hv - MAIN BEAM & SECONDARY BEAM
34
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
PANEL HANDLING RACK
PANEL TO PLYWOOD TRANSITIONAL
HORIZONTAL FORMING & SHORING SYSTEMS
Hv MAIN BEAM / SECONDARY BEAM
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
35
MASCO
M A SONS SUP PLY
MEGA SHORE
The MEGA SHORE Support System is designed to decrease labor costs, improve safety and meet the demands of structural requirements. The system has been designed to combine maximum flexibility in use with a minimum number of components. Legs, frames, and beams are the only 3 components used for basic application. Mega Shore can support loads up to 22,000 lbs per leg. Legs are available in three sizes, each with continuous vertical slots to allow ledger frames to be fitted at the optimum height. Screw jacks can be fitted top and bottom for vertical adjustment up to 8 feet.
PANELIZED DECK TABLES
HORIZONTAL FORMING & SHORING SYSTEMS
POWER PLANT PEDESTAL - CLATSKANIE, OR
36
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MAS O N S SU P P L Y
MULTI-USE BUILDING - PORTLAND, OR
HORIZONTAL FORMING & SHORING SYSTEMS
MEGA SHORE PERIMETER DECK TABLES.
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
37
MASCO
M A SO NS SUPPLY
10K - STEEL SHORE FRAMES
10K Steel Shore Frames are available in 4', 5' and 6' heights and either 2' or 4' widths. The wide range of frame sizes together with the post shore staffs and staff attachments enable the system to be utilized for a variety of job-site applications.
SHORING PROJECT - EvERETT, WA
HORIZONTAL FORMING & SHORING SYSTEMS
AUTO DEALERSHIP - TACOMA, WA
OFFICE BUILDING - PORTLAND, OR
POST SHORES
Steel Post Shores are an economic and popular method of shoring and re-shoring in the construction market today. They are ideally suited to all kinds of building construction and repair.
SHOPPING MALL - SEATTLE, WA
38
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
SOLDIER BEAM
Soldiers are a strong, light weight construction beam system with unlimited application possibilities. They are truly the "next generation" because of their unique hole patterns, which make them adaptable to almost any configuration. Soldiers are compatible with all forming systems. They can be the waler and strongback system for Steel-Ply or Aluminum Beam Gang. They can be the one-sided bracing or catilever stiffbacks for MAX-A-FORM; they can be the truss and shoring for custom applications. Soldiers are double, 9", specially formed channels of 10 gauge, high strength steel. The end plates are perpendicular to the channels. When bolted together endto-end with four " 2" Speed Bolts, the Soldiers become a straight, continuous beam which develops its full strength through the connection.
ONE SIDED WALL FORMING
HORIZONTAL FORMING & SHORING SYSTEMS
Soldiers are lightweight and strong. They are as light as double 5" channels and as strong as double 8" channels. The engineering data confirms the impressive strength-toweight ratio of Soldiers.
HOSPITAL - PORTLAND, OR
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
39
MASCO
M A SO NS SUPPLY
HOv ExPANSION EvERETT
OVERHANG BRACKETS
Overhang Brackets are designed for maximum adjustment and strength to meet the rigors of heavy cantilever/ overhang applications. They can be mounted to steel beams, precast concrete beams and concrete box beams with the appropriate hanger devices. Both of the bracket models can be easily and quickly preset on the ground and then set in place as needed.
HORIZONTAL FORMING & SHORING SYSTEMS
PULP MILL - LONGvIEW, WA
STADIUM - SEATTLE, WA
40
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
CONDOMINIUM PROJECTS - PORTLAND, OR
SAFETY RAIL BRACKETS
A strong clamp-on post opens wide and tightens quickly on slabs of any thickness from 0"-29", allowing for application to practically any project. Simple to install with a top adjusting wing nut, utilizing a hammer or wrench from a standing position. Galvanized for durability, it is designed to withstand the toughest handling. The captive inner member extends to 29", preventing the bottom piece from falling out.
HORIZONTAL FORMING & SHORING SYSTEMS
OFFICE BUILDLING - PORTLAND, OR
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
41
MASCO
M A SO NS SUPPLY
STEEL-PLY
Any size column up to 24" wide can be formed without ties by using standard Steel-Ply panels or fillers. Columns can be handset with standard outside corners. Handsetting forms is productive for projects with just a few columns or columns with varying dimensions. Columns can also be gangformed with a column hinge and a release corner for greater productivity. Quick column hardware is used in combination with the column hinge to provide a quick closure and release. This method of column forming with Steel-Ply virtually eliminates lost hardware and also provides maximum forming productivity, though you need a crane to move the equipment.
CONDOMINIUM PROJECT - PORTLAND, OR
COLUMN FORMING
MIx-USE BUILDING - SEATTLE, WA
42
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
ADJUSTABLE STEEL
Adjustable column form is one of the most versatile and productive forming systems for forming square and rectangular columns. From 9" x 16" up to 48" square, the system embraces a phenomenal range of civil and commercial column sizes. This extremely adaptable system is also highly regarded for the excellent, consistent concrete finish produced every pour.
BELLINGHAM, WA
MIxED USE BUILDING - SEATTLE, WA
COLUMN FORMING
STUDENT HOUSING - PORTLAND, OR
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
43
MASCO
M A SO NS SUPPLY
MAX-A-FORM
MAX-A-FORM combines the laborsaving benefits of modular forming with the strength of an all-steel design. The structurally welded frame and steel face can support concrete loads over long spans without the need for shoring. It is ideal for gang forming walls, large columns or bridge piers. The MAX-A-FORM concrete forming system combines a 3/16" steel face with heavy duty steel crossmembers to support higher pour rates. Panels up to 8' wide are rated at 1,500 psf, 9' and 10' wide panels at 1,200 psf. The strength of this design virtually eliminates the need for walers and dramatically reduces tie requirements. The MAX-A-FORM system consists of more than 100 standard panel sizes that can be engineered for the most demanding concrete forming conditions. This system provides exceptional productivity for large structural applications.
FREEWAY - PORTLAND, OR
COLUMN FORMING
44
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
CIRCULAR STEEL
FREEWAY - MAPLE vALLEY, WA
Heavy duty, all-steel Circular Forms provide consistently round, smooth concrete columns for building and bridge construction. A 3,000 psf pressure rating allows for fast pour rates. Wide variety of standard sizes available for rental or purchase. Sizes include: Diameters: 24", 30", 36", 42", 48", 54", 60", 72", 84" & 96" Lengths: 1', 2', 4', 8' and 10' (bolt together for desired height)
HOOD CANAL, WA
COLUMN FORMING
BRIDGE COLUMNS - EvERETT, WA
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
45
MASCO
M A SO NS SUPPLY
LOCKFAST COLUMN CLAMP
LockFast Column Clamps have these advantages; they are job-built and gang formed. There are no loose pieces and they have minimum labor costs. They are designed for rapid locking action and fast placement of concrete.
HOTEL - LAS vEGAS, Nv
COLUMN FORMING
GARAGE - HILLSBORO, OR
46
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
LOK'N SQUARE COLUMN CLAMP
LOK'N Square Column Clamps are job-built and gang formed. They have the advantage of no loose pieces, and they have proven to keep labor costs at a minimum. They are designed for rapid locking action and fast placement of concrete.
COLUMN FORMING
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
47
MASCO
M A SO NS SUPPLY
RIDGEFIELD FORM YARD
CUSTOM MANUFACTURING
Masons' forming & shoring facility is complete with covered assembly space and ten plus acres of yard. The Ridgefield facility will help to supply your special needs from simple plate washers to custom forming components.
CUSTOM HIGHWAY BARRIERS
CUSTOM POURED IN PLACE PARAPET AND SLAB EDGE FORMS
CUSTOM STEEL BRIDGE DECK SOFFIT FORM UTILIZING STANDARD STEEL SHORING
48
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
PRE-ASSEMBLY
Panel Pre-Assembly includes design and layout drawings to determine required panel sizes, attachment of plywood to rental components, (ie. aluminum joists, steel walers) pre-drilling of tie holes, piece marking and loading on trucks.
PRE-ASSEMBLY
TIE TIE
TIE TIE
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
49
MASCO
M A SO NS SUPPLY
THE BEST PRODUCTS AVAILABLE
Masons has the largest inventory of masonry specialties, concrete forms, and accessories in the Northwest. With over 90 years of experience, Masons knows what works and offers only the best products available. We have everything you need to complete your project. Masons comprehensive inventory includes:
MASONS SUPPLY
CONCRETE CHEMICALS AND POWDERS Concrete Admixtures Curing and Sealing Compounds Epoxy Adhesives and Coatings Grouts and Hardeners Patching Materials Sealant and Waterproofing Surface Retarders CONCRETE FORMING SYSTEMS AND ACCESSORIES Column and Form Treatments Form Releases Forming Systems Tieing and Handset Slab and Horizontal Tilt-Up Inserts Plastic Accessories
MASONRY SPECIALISTS Cement and Mortars Color and Admixtures Flashing and Waterproofing Seismic Ties for New and Retrofit Seismic Anchors - Chemical and Mechanical Wall Ties and Reinforcing SUBGRADE PRODUCTS Drainage Boards Geotextile Fabric and Silt Fence Safety Fence Sheet Membrane Vapor Barrier TOOLS Concrete Placing and Finishing Masonry Placing and Finishing Power Trowels, Screeds, Mixers and Saws Safety Supplies
RENTAL AND SALES OF: Adjustable Radius Walers Aluminum Beams Column Forms Crane Set Forms Euro Clamp Wall Forms Euro Drop Head Deck Forms Handset Forms Overhang Brackets Safety Rail Post She Bolts and Taper Ties Shoring Soldier Beam Snap Ties and Accessories Steel Column Forms Steel Forms Steel Ply Ties Tilt-Up Braces and Accessories Walers
NEW CONSTRUCTION PROJECTS
Masons has the products to meet your concrete and masonry needs for every stage of your project. Masons carries a full line of products, such as chemicals, admixtures, waterproofing and tools. We offer forming products such as modular wood faced forming, standard steel forming, aluminum beam gang, heavy duty forming, bridge deck forming, precast curb and gutter forms, and architectural form liners. We can supply all your vertical and horizontal forming needs.
INDUSTRIAL PROJECTS
With Masons experience, knowledge and large inventory of dependable products and supplies, we can meet your immediate requirements for emergencies, shut-downs and additions. Our expert personnel can work with your engineering, construction and maintenance departments and get you into production. Our specialists are experts in emergency repairs on floors, walls, ceilings, and machinery bases.
RENOvATION PROJECTS
90 years of experience working with manufacturers and supplying construction materials has given us the knowledge to work with architects, engineers and contractors. We can provide the materials to restore buildings and other structures to their original appearance and structural integrity.
CIvIL PROJECTS
CALL AND ASK TO GET ANY OF OUR OTHER CATALOGS:
Concrete Forming and Accessories Concrete and Masonry Tools for the Trades Construction Liquid and Powder
ALSO AVAILABLE ON CD & ONLINE
Masons can support you on your road, bridge, dam, water-treatment, reservoir, and other concrete structural projects. Whether new construction or repair, Masons has the products you need, delivered when you need them. Our expertise is backed by over 90 years of serving the Northwest. Whether you are in the planning, building or construction phase, keep your job on schedule with innovative ideas and proven products at competitive prices.
50
MASONS SUPPLY COMPANY
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASCO
MASON S S UPPL Y
FORMING FACILITIES
masons RIDGEFIELD FoRmInG & sHoRInG FaCILITY RIDGEFIELD, Wa
masons WooDInvILLE FoRm YaRD WooDInvILLE, Wa
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville
Oregon (800) 537-3407 Washington (800) 537-6216
MASONS SUPPLY COMPANY
51
LOCATIONS
OREGON
PORTLAND DISTRIBUTION CENTER 2637 SE 12TH AVE PORTLAND, OR 97202 TEL (503) 234-4321 WATTS (800) 537-3407 FAx (503) 234-5606 CLACKAMAS BRANCH 14670 SE 82ND DR CLACKAMAS, OR 97015 TEL (503) 722-1528 FAx (503) 722-1569 EUGENE BRANCH 1485 GLENWOOD BLVD EUGENE, OR 97403 TEL (541) 744-6696 WATTS (888) 537-1227 FAx (541) 744-2302 WEST EUGENE BRANCH 555 COMMERCIAL ST, Ste A EUGENE, OR 97402 TEL (541) 683-1408 FAx (541) 683-1956 HILLSBORO BRANCH 21535 NW CHERRY LANE HILLSBORO, OR 97124 TEL (503) 533-0107 FAx (503) 533-0407 MEDFORD BRANCH 2036 LARS WAY MEDFORD, OR 97501 TEL (541) 772-6161 FAx (541) 772-4752 SALEM BRANCH 2430 MCGILCHRIST ST SE SALEM, OR 97302 TEL (503) 585-5504 WATTS (800) 655-0773 FAx (503) 585-6732 WILSONvILLE BRANCH 10955 SW COMMERCE CIRCLE, Ste E WILSONVILLE, OR 97070 TEL (503) 582-9320 FAx (503) 582-8324
WASHINGTON
WOODINvILLE DISTRIBUTION CENTER 6018-234TH ST SE, Ste A WOODINVILLE, WA 98072 TEL (425) 487-6161 WATTS (800) 537-6216 FAx (425) 402-3676 PORT ORCHARD 1525 VIVIAN COURT, Ste 150 PORT ORCHARD, WA 98367 TEL (360) 876-6372 FAx (360) 876-6373 RIDGEFIELD FORM/SHORE/CUSTOM FAB 7707 S. UNION RIDGE PKWY RIDGEFIELD, WA 98642 TEL (360) 887-4777 FAx (360) 887-3048 SEATTLE BRANCH 115 S. DAWSON ST. SEATTLE, WA 98108 TEL (206) 767-4645 FAx (206) 767-4696 TACOMA BRANCH 2506-104TH ST CT S, STE H LAKEWOOD, WA 98499 TEL (253) 581-6161 FAx (253) 588-4272
LOCALLY OWNED FOR OvER 90 YEARS
MASCO
MA SON S SU PPL Y
