QGIS - Open Source GIS
QGIS - Open Source GIS
Preamble
This document is the original user guide of the described software Quantum GIS. The software and hardware described in this document are in most cases registered trademarks and are therefore subject to the legal requirements. Quantum GIS is subject to the GNU General Public License. Find more information on the Quantum GIS Homepage http://www.qgis.org. The details, data, results etc. in this document have been written and veried to the best of knowledge and responsibility of the authors and editors. Nevertheless, mistakes concerning the content are possible. Therefore, all data are not liable to any duties or guarantees. The authors, editors and publishers do not take any responsibility or liability for failures and their consequences. Your are always welcome to indicate possible mistakes.
A A This document has been typeset with LTEX. It is available as LTEX source code via subversion and online as PDF document via http://qgis.osgeo.org/documentation/manuals.html. Translated versions of this document can be downloaded via the documentation area of the QGIS project as well. For more information about contributing to this document and about translating it, please visit: http://www.qgis.org/wiki/
Links in this Document This document contains internal and external links. Clicking on an internal link moves within the document, while clicking on an external link opens an internet address. In PDF form, internal links are shown in blue, while external links are shown in red and are handled by the system browser. In HTML form, the browser displays and handles both identically.
User, Installation and Coding Guide Authors and Editors: Tara Athan Otto Dassau Anne Ghisla Magnus Homann Werner Macho Claudia A. Engel Jrgen E. Fischer Gary E. Sherman Radim Blazek Martin Dobias Stephan Holl K. Koy Carson J.Q. Farmer Brendan Morely Marco Hugentobler Tim Sutton Godofredo Contreras Peter Ersts N. Horning Lars Luthman Tyler Mitchell David Willis Gavin Macaulay
With thanks to Bertrand Masson for the layout, to Tisham Dhar for preparing the initial msys (MS Windows) environment documentation, to Tom Elwertowski and William Kyngesburye for help in the MAC OSX Installation Section and to Carlos Dvila, Paolo Cavallini and Christian Gunning for revisions. If we have neglected to mention any contributors, please accept our apologies for this oversight. Copyright c 2004 - 2011 Quantum GIS Development Team Internet : http://www.qgis.org
ii
Contents
Preamble License of this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table of Contents List of Figures List of Tables List of QGIS Tips Foreword Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conventions GUI Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Text or Keyboard Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Platform-specic instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction To GIS 1.1 Why is all this so new? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.1 Raster Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.2 Vector Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Getting Started 2.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Sample Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3 Sample Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features at a Glance 3.1 Starting and Stopping QGIS . . . . . 3.1.1 Command Line Options . . . 3.2 QGIS GUI . . . . . . . . . . . . . . . 3.2.1 Menu Bar . . . . . . . . . . . 3.2.2 Toolbars . . . . . . . . . . . . 3.2.3 Map Legend . . . . . . . . . 3.2.4 Map View . . . . . . . . . . . 3.2.5 Map Overview . . . . . . . . 3.2.6 Status Bar . . . . . . . . . . . 3.2.7 Keyboard shortcuts . . . . . . 3.2.8 Context help . . . . . . . . . 3.3 Rendering . . . . . . . . . . . . . . . 3.3.1 Scale Dependent Rendering 3.3.2 Controlling Map Rendering . 3.4 Measuring . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
iii
3.10
3.4.1 Measure length, areas and angles 3.4.2 Select and deselect features . . . Projects . . . . . . . . . . . . . . . . . . . Output . . . . . . . . . . . . . . . . . . . . GUI Options . . . . . . . . . . . . . . . . . Annotation Tools . . . . . . . . . . . . . . 3.8.1 Form annotations . . . . . . . . . . Spatial Bookmarks . . . . . . . . . . . . . 3.9.1 Creating a Bookmark . . . . . . . . 3.9.2 Working with Bookmarks . . . . . 3.9.3 Zooming to a Bookmark . . . . . . 3.9.4 Deleting a Bookmark . . . . . . . . Live GPS tracking . . . . . . . . . . . . . . 3.10.1 Position coordinates . . . . . . . . 3.10.2 GPS signal strength . . . . . . . . 3.10.3 GPS polar window . . . . . . . . . 3.10.4 GPS options . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
26 26 26 27 28 31 31 33 33 33 33 33 33 34 34 34 34 37 37 37 38 39 39 39 40 41 42 42 43 44 45 45 45 47 50 50 52 54 56 58 58 58 61 61 62 63 64 65 68 71 73 74
4 Working with Vector Data 4.1 ESRI Shapeles . . . . . . . . . . . . . . . . . . . . . . . . . 4.1.1 Loading a Shapele . . . . . . . . . . . . . . . . . . 4.1.2 Improving Performance . . . . . . . . . . . . . . . . 4.1.3 Loading a MapInfo Layer . . . . . . . . . . . . . . . 4.1.4 Loading an ArcInfo Binary Coverage . . . . . . . . . 4.2 PostGIS Layers . . . . . . . . . . . . . . . . . . . . . . . . . 4.2.1 Creating a stored Connection . . . . . . . . . . . . . 4.2.2 Loading a PostGIS Layer . . . . . . . . . . . . . . . 4.2.3 Some details about PostgreSQL layers . . . . . . . . 4.2.4 Importing Data into PostgreSQL . . . . . . . . . . . 4.2.5 Improving Performance . . . . . . . . . . . . . . . . 4.2.6 Vector layers crossing 180 longitude . . . . . . . . 4.3 SpatiaLite Layers . . . . . . . . . . . . . . . . . . . . . . . . 4.4 The Vector Properties Dialog . . . . . . . . . . . . . . . . . . 4.4.1 Style Tab . . . . . . . . . . . . . . . . . . . . . . . . 4.4.2 Working with the New Generation Symbology . . . . 4.4.3 Style Manager to manage symbols and color ramps 4.4.4 Old Symbology . . . . . . . . . . . . . . . . . . . . . 4.4.5 Labels Tab . . . . . . . . . . . . . . . . . . . . . . . 4.4.6 New Labeling . . . . . . . . . . . . . . . . . . . . . . 4.4.7 Attributes Tab . . . . . . . . . . . . . . . . . . . . . . 4.4.8 General Tab . . . . . . . . . . . . . . . . . . . . . . . 4.4.9 Metadata Tab . . . . . . . . . . . . . . . . . . . . . . 4.4.10 Actions Tab . . . . . . . . . . . . . . . . . . . . . . . 4.4.11 Joins Tab . . . . . . . . . . . . . . . . . . . . . . . . 4.4.12 Diagram Tab . . . . . . . . . . . . . . . . . . . . . . 4.5 Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5.1 Setting the Snapping Tolerance and Search Radius 4.5.2 Zooming and Panning . . . . . . . . . . . . . . . . . 4.5.3 Digitizing an existing layer . . . . . . . . . . . . . . . 4.5.4 Advanced digitizing . . . . . . . . . . . . . . . . . . . 4.5.5 Creating a new Shapele and Spatialite layer . . . . 4.5.6 Working with the Attribute Table . . . . . . . . . . . . 4.6 Query Builder . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iv
4.7
Field Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
76 79 79 79 80 80 81 82 82 83 83 83 83 84 85 85 85 85 85 86 88 89 89 89 90 90 93 93 93
5 Working with Raster Data 5.1 What is raster data? . . . . 5.2 Loading raster data in QGIS 5.3 Raster Properties Dialog . . 5.3.1 Style Tab . . . . . . 5.3.2 Transparency Tab . 5.3.3 Colormap . . . . . . 5.3.4 General Tab . . . . . 5.3.5 Metadata Tab . . . . 5.3.6 Pyramids Tab . . . . 5.3.7 Histogram Tab . . . 5.4 Raster Calculator . . . . . . 5.5 Raster Analysis . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
6 Working with OGC Data 6.1 What is OGC Data . . . . . . . . . 6.2 WMS Client . . . . . . . . . . . . . 6.2.1 Overview of WMS Support 6.2.2 Selecting WMS Servers . . 6.2.3 Loading WMS Layers . . . 6.2.4 Server-Search . . . . . . . 6.2.5 Layer Order . . . . . . . . . 6.2.6 Tilesets . . . . . . . . . . . 6.2.7 Using the Identify Tool . . . 6.2.8 WMS Client Limitations . . 6.3 WFS and WFS-T Client . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
7 QGIS Server 7.1 Sample installation on Debian Squeeze . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.2 Creating a WMS from a QGIS project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Working with Projections 8.1 Overview of Projection Support . . . . 8.2 Specifying a Projection . . . . . . . . . 8.3 Dene On The Fly (OTF) Projection . . 8.4 Custom Coordinate Reference System
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
97 . 97 . 97 . 98 . 100 101 101 101 102 102 104 104 105 106 106 108 108 109 109 112
9 GRASS GIS Integration 9.1 Starting the GRASS plugin . . . . . . . . . . . . . 9.2 Loading GRASS raster and vector layers . . . . . 9.3 GRASS LOCATION and MAPSET . . . . . . . . . 9.3.1 Creating a new GRASS LOCATION . . . 9.3.2 Adding a new MAPSET . . . . . . . . . . 9.4 Importing data into a GRASS LOCATION . . . . . 9.5 The GRASS vector data model . . . . . . . . . . 9.6 Creating a new GRASS vector layer . . . . . . . . 9.7 Digitizing and editing a GRASS vector layer . . . 9.8 The GRASS region tool . . . . . . . . . . . . . . . 9.9 The GRASS toolbox . . . . . . . . . . . . . . . . 9.9.1 List of graphical GRASS Toolbox modules 9.9.2 Working with GRASS modules . . . . . . 9.9.3 GRASS module examples . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
9.9.4 9.9.5
Working with the GRASS LOCATION browser . . . . . . . . . . . . . . . . . . . . . . . 116 Customizing the GRASS Toolbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 119 120 120 121 122 122 124 124 125 126 127 128 128 128 129 130 130 130 133 133 133 134 134 136 137 139 139 139 140 140 141 142 143 144 147 148 153 157 157 157 159 162 165 165 166 166 166 167
10 Print Composer 10.1 Open a new Print Composer Template . . . . . . . . . . . . . . . . . . . 10.2 Using Print Composer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.3 Adding a current QGIS map canvas to the Print Composer . . . . . . . . 10.3.1 Map item tab - Map and Extents dialog . . . . . . . . . . . . . . . 10.3.2 Map item tab - Grid and General options dialog . . . . . . . . . . 10.4 Adding other elements to the Print Composer . . . . . . . . . . . . . . . 10.4.1 Label item tab - Label and General options dialog . . . . . . . . . 10.4.2 Image item tab - Picture options and General options dialog . . . 10.4.3 Legend item tab - General, Legend items and Item option dialog 10.4.4 Scalebar item tab - Scalebar and General options dialog . . . . . 10.5 Navigation tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.6 Revert and Restore tools . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.7 Add Basic shape and Arrow . . . . . . . . . . . . . . . . . . . . . . . . . 10.8 Add attribute table values . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.9 Raise, lower and align elements . . . . . . . . . . . . . . . . . . . . . . . 10.10 Creating Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.11 Saving and loading a print composer layout . . . . . . . . . . . . . . . . 11 QGIS Plugins 11.1 Managing Plugins . . . . . . . . . . . . . . . . . 11.1.1 Loading a QGIS Core Plugin . . . . . . 11.1.2 Loading an external QGIS Plugin . . . . 11.1.3 Using the QGIS Python Plugin Installer 11.2 Data Providers . . . . . . . . . . . . . . . . . . 12 Using QGIS Core Plugins 12.1 Coordinate Capture Plugin . . . . . . . . . . . 12.2 Decorations Plugins . . . . . . . . . . . . . . . 12.2.1 Copyright Label Plugin . . . . . . . . . 12.2.2 North Arrow Plugin . . . . . . . . . . . 12.2.3 Scale Bar Plugin . . . . . . . . . . . . 12.3 Delimited Text Plugin . . . . . . . . . . . . . . 12.4 Dxf2Shp Converter Plugin . . . . . . . . . . . 12.5 eVis Plugin . . . . . . . . . . . . . . . . . . . . 12.5.1 Event Browser . . . . . . . . . . . . . 12.5.2 Event ID Tool . . . . . . . . . . . . . . 12.5.3 Database connection . . . . . . . . . . 12.6 fTools Plugin . . . . . . . . . . . . . . . . . . . 12.7 GDAL Tools Plugin . . . . . . . . . . . . . . . 12.7.1 What is GDALTools? . . . . . . . . . . 12.7.2 The GDAL Library . . . . . . . . . . . 12.7.3 Examples . . . . . . . . . . . . . . . . 12.8 Georeferencer Plugin . . . . . . . . . . . . . . 12.9 GPS Plugin . . . . . . . . . . . . . . . . . . . 12.9.1 What is GPS? . . . . . . . . . . . . . . 12.9.2 Loading GPS data from a le . . . . . 12.9.3 GPSBabel . . . . . . . . . . . . . . . . 12.9.4 Importing GPS data . . . . . . . . . . 12.9.5 Downloading GPS data from a device
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
vi
12.9.6 Uploading GPS data to a device 12.9.7 Dening new device types . . . . 12.10 Interpolation Plugin . . . . . . . . . . . . 12.11 MapServer Export Plugin . . . . . . . . . 12.11.1 Creating the Project File . . . . . 12.11.2 Creating the Map File . . . . . . 12.11.3 Testing the Map File . . . . . . . 12.12 Ofine Editing Plugin . . . . . . . . . . . 12.13 Oracle GeoRaster Plugin . . . . . . . . . 12.13.1 Managing connections . . . . . . 12.13.2 Selecting a GeoRaster . . . . . . 12.13.3 Displaying GeoRaster . . . . . . 12.14 OpenStreetMap Plugin . . . . . . . . . . 12.14.1 Installation . . . . . . . . . . . . 12.14.2 Basic user interface . . . . . . . 12.14.3 Loading OSM data . . . . . . . . 12.14.4 Viewing OSM data . . . . . . . . 12.14.5 Editing basic OSM data . . . . . 12.14.6 Editing relations . . . . . . . . . 12.14.7 Downloading OSM data . . . . . 12.14.8 Uploading OSM data . . . . . . . 12.14.9 Saving OSM data . . . . . . . . . 12.14.10Import OSM data . . . . . . . . . 12.15 Raster Terrain Modelling Plugin . . . . . 12.16 Road Graph Plugin . . . . . . . . . . . . 12.17 Spatial Query Plugin . . . . . . . . . . . 12.18 SQL Anywhere Plugin . . . . . . . . . . 13 Help and Support 13.1 Mailinglists . 13.2 IRC . . . . . 13.3 BugTracker . 13.4 Blog . . . . 13.5 Wiki . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
167 167 168 169 169 170 172 172 173 173 174 175 175 177 177 178 179 179 181 182 183 183 184 185 186 187 188 191 191 192 192 192 192
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
A GNU General Public License 193 A.1 Quantum GIS Qt exception for GPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 B GNU Free Documentation License 197
vii
List of Figures
2.1 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 4.19 4.20 4.21 4.22 4.23 4.24 4.25 4.26 4.27 4.28 4.29 A Simple QGIS Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 17 24 26 30 31 32 34 35 38 39 40 44 44 46 48 49 50 51 52 53 54 54 55 56 56 57 57 58 60 61 62 63 64 66 69 71 71
QGIS GUI with Alaska sample data (KDE) Dene shortcut options (KDE) . . . . . . . . . . . . . . . . . Measure tools in action Proxy-settings in QGIS . . . . . . . . . . . . . . . . . . . . . Annotation text dialog Customized qt designer annotation form . Live GPS tracking . . . . . . . . . . . . . . . . . . . . GPS tracking options window
. . . . . . . . . . . . . . . . . . . . . . . . . Add Vector Layer Dialog Open an OGR Supported Vector Layer Dialog . . . . . . . . . . . . QGIS with Shapele of Alaska loaded . . . . . . . . . . . . . . . . . Map in lat/lon crossing the 180 longitude line . . . . . . . . . . . . . longitude applying the ST_Shift_Longitude function Map crossing 180 Vector Layer Properties Dialog . . . . . . . . . . . . . . . . . . . . . Single Symbolizing options . . . . . . . . . . . . . . . . . . . . . . . Categorized Symbolizing options . . . . . . . . . . . . . . . . . . . . . . . . . Example of custom gradient color ramp with multiple stops Graduated Symbolizing options . . . . . . . . . . . . . . . . . . . . . Rule-based Symbolizing options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Point displacement dialog Dening symbol properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Style Manager to manage symbols and color ramps . . . . . . . . . . . . . . . . . . . . . . . . Old Symbolizing Options Smart labeling of vector point layers . . . . . . . . . . . . . . . . . . Smart labeling of vector line layers . . . . . . . . . . . . . . . . . . . Smart labeling of vector polygon layers . . . . . . . . . . . . . . . . Dialog to change label engine settings . . . . . . . . . . . . . . . . . Dialog to select an edit widget for an attribute column . . . . . . . . Select feature and choose action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Join an attribute table to an existing vector layer Vector properties dialog with diagram tab . . . . . . . . . . . . . . . Diagram from temperature data overlayed on a map . . . . . . . . . Edit snapping options on a layer basis . . . . . . . . . . . . . . . . . Enter Attribute Values Dialog after digitizing a new vector feature . . Redo and Undo digitizing steps . . . . . . . . . . . . . . . . . . . . . Rotate Point Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . Creating a new Shapele layer Dialog . . . . . . . . . . . . . . . . .
viii
4.30 4.31 4.32 4.33 5.1 5.2 6.1 6.2 6.3 7.1 7.2 7.3 8.1 8.2 8.3 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 9.10 9.11 9.12 9.13 9.14
Creating a New Spatialite layer Dialog . . Attribute Table for Alaska layer . . . . . . . . . . . . . . . . . . . . . Query Builder Field Calculator . . . . . . . . . . . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
72 73 75 76 81 84 87 88 91 94 94 95
Raster Layers Properties Dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Raster Calculator Dialog for adding a WMS server, showing its available layers . . . . . . . . . . . . . . . . . Dialog for searching WMS servers after some keywords . . . . . . . . . . . . . . . . . . . . Adding a WFS layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard WMS with USA boundaries included in the qgis server . . . . . . . . . . . . . . . Denitions for a qgis project WMS server . . . . . . . . . . . . . . . . . . . . . . . . . . . . QGIS WMS Server based on a qgis project . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 CRS tab in the QGIS Options Dialog Projection Dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Custom CRS Dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 GRASS data in the alaska LOCATION (adapted from Neteler & Mitasova 2008 [4]) Creating a new GRASS LOCATION or a new MAPSET in QGIS . . . . . . . . . GRASS Digitizing Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GRASS Digitizing Category Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GRASS Digitizing Settings Tab GRASS Digitizing Symbolog Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . GRASS Digitizing Table Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GRASS Toolbox and searchable Modules List . . . . . . . . . . . . . . . . . . . GRASS Toolbox Module Dialogs . . . . . . . . . . . . . . . . . . . . . . . . . . . GRASS Toolbox r.contour module . . . . . . . . . . . . . . . . . . . . . . . . . . GRASS module v.generalize to smooth a vector map . . . . . . . . . . . . . . . The GRASS shell, r.shaded.relief module . . . . . . . . . . . . . . . . . . . . . . Displaying shaded relief created with the GRASS module r.shaded.relief . . . . GRASS LOCATION browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 104 106 108 109 109 110 110 111 113 114 115 116 117 120 122 123 124 125 126 127 128 129 129 131 131
10.1 Print Composer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.2 Print Composer map item tab - Map and Extents dialog . . . . . . . . . . . . . 10.3 Print Composer map item tab - Grid and General options dialog . . . . . . . . 10.4 Print composer label item tab - Label options and General options dialog . . . 10.5 Print composer image item tab - Picture options and General options . . . . . 10.6 Print composer legend item tab - General, Legend items and Item option dialog 10.7 Print composer scalebar item tab - Scalebar and General options dialog . . . . 10.8 Command history in the Print Composer . . . . . . . . . . . . . . . . . . . . . 10.9 Print composer basic shape and arrow item tab - Shape and Arrow options dialog 10.10 Print composer attribute table item tab - Table and General options dialog . . . 10.11 Print Composer with map view, legend, scalebar, coordinates and text added . 10.12 Composer Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
11.1 Plugin Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 11.2 Installing external python plugins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
ix
12.1 Coordinate Cature Plugin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.2 Copyright Label Plugin 12.3 North Arrow Plugin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4 Scale Bar Plugin 12.5 Delimited Text Dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.6 Dxf2Shape Converter Plugin 12.7 The eVis display window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.8 The eVis Options window 12.9 The eVis External Applications window . . . . . . . . . . . . 12.10 The eVis Database connection window . . . . . . . . . . . . 12.11 The eVis SQL query tab . . . . . . . . . . . . . . . . . . . . 12.12 The eVis Perdened queries tab . . . . . . . . . . . . . . . . 12.13 The GDALTools menu list . . . . . . . . . . . . . . . . . . . . 12.14 The Information dialog window . . . . . . . . . . . . . . . . . 12.15 The Contours dialog window . . . . . . . . . . . . . . . . . . 12.16 The resulting contours layer . . . . . . . . . . . . . . . . . . . 12.17 The GDAL warp dialog window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.18 Georeferencer Plugin Dialog 12.19 Add points to the raster image . . . . . . . . . . . . . . . . . 12.20 Dening the georeferencer transformation settings . . . . . . 12.21 The GPS Tools dialog window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.22 The download tool 12.23 Interpolation Plugin . . . . . . . . . . . . . . . . . . . . . . . 12.24 Interpolation of elevp data using TIN method . . . . . . . . . 12.25 Arrange raster and vector layers for QGIS project le . . . . . . . . . . . . . . . . . . . . . . . . 12.26 Export to MapServer Dialog 12.27 Test PNG created by shp2img with all MapServer Export layers 12.28 Create an ofine project from PostGIS or WFS layers . . . . 12.29 Create Oracle connection dialog . . . . . . . . . . . . . . . . 12.30 Select Oracle GeoRaster dialog . . . . . . . . . . . . . . . . 12.31 OpenStreetMap data in the web . . . . . . . . . . . . . . . . 12.32 OSM plugin user interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.33 Load OSM data dialog 12.34 Changing an OSM feature tag . . . . . . . . . . . . . . . . . 12.35 OSM point creation message . . . . . . . . . . . . . . . . . . 12.36 OSM download dialog . . . . . . . . . . . . . . . . . . . . . . 12.37 OSM upload dialog . . . . . . . . . . . . . . . . . . . . . . . 12.38 OSM saving dialog . . . . . . . . . . . . . . . . . . . . . . . . 12.39 OSM import message dialog . . . . . . . . . . . . . . . . . . 12.40 Import data to OSM dialog . . . . . . . . . . . . . . . . . . . 12.41 Raster Terrain Modelling Plugin . . . . . . . . . . . . . . . . . 12.42 Dene settings for the road graph plugin . . . . . . . . . . . . 12.43 Road Graph Plugin . . . . . . . . . . . . . . . . . . . . . . . 12.44 Spatial Query analysis - regions contain airports . . . . . . . 12.45 SQL Anywhere dialog . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
139 140 140 141 142 143 144 145 146 149 150 151 159 160 160 161 161 163 163 164 166 167 168 169 170 171 172 173 174 174 176 177 178 179 180 182 183 184 184 185 185 186 187 188 189
List of Tables
4.1 4.2 4.3 4.4 6.1 9.1 PostGIS Connection Parameters . . . Vector layer basic editing toolbar . . . Vector layer advanced editing toolbar . List of operators for the eld calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 65 69 78 86
10.1 Print Composer Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 12.1 26 QGIS Core Plugins . . . . . . . . . . . . . . . . . . . . . . 12.2 Example format using absolute path, relative path, and a URL 12.3 The XML tags read by eVis . . . . . . . . . . . . . . . . . . . 12.4 fTools Analysis tools . . . . . . . . . . . . . . . . . . . . . . . 12.5 fTools Research tools . . . . . . . . . . . . . . . . . . . . . . . 12.6 fTools Geoprocessing tools . . . . . . . . . . . . . . . . . . . . 12.7 fTools Geometry tools . . . . . . . . . . . . . . . . . . . . . . . 12.8 fTools Data management tools . . . . . . . . . . . . . . . . . . 12.9 List of GDAL tools . . . . . . . . . . . . . . . . . . . . . . . . . 12.10 Georeferencer Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 147 152 154 154 155 155 156 157 162
xi
QGIS Tips
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 U P - TO - DATE D OCUMENTATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E XAMPLE U SING COMMAND LINE ARGUMENTS . . . . . . . . R ESTORING TOOLBARS . . . . . . . . . . . . . . . . . . . . . Z OOMING THE M AP WITH THE M OUSE W HEEL . . . . . . . . PANNING THE M AP WITH THE A RROW K EYS AND S PACE B AR C ALCULATING THE CORRECT S CALE OF YOUR M AP C ANVAS U SING P ROXIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 16 21 23 23 23 31 38 38 41 42 42 43 45 62 65 66 66 68 68 68 74 75 81 83 86 87 87 88 88 90 90 92 98 99 102 105 106 106 108
L AYER C OLORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L OAD LAYER AND PROJECT FROM MOUNTED EXTERNAL DRIVES ON OS X QGIS U SER S ETTINGS AND S ECURITY . . . . . . . . . . . . . . . . . . . P OST GIS L AYERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E XPORTING DATASETS FROM P OST GIS . . . . . . . . . . . . . . . . . . . I MPORTING S HAPEFILES C ONTAINING P OSTGRE SQL R ESERVED W ORDS S PATIA L ITE DATA MANAGEMENT P LUGIN . . . . . . . . . . . . . . . . . . . C ONCURRENT E DITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S AVE R EGULARLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ATTRIBUTE VALUE T YPES . . . . . . . . . . . . . . . . . . . . . . . . . . . V ERTEX M ARKERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C ONGRUENCY OF PASTED F EATURES . . . . . . . . . . . . . . . . . . . . F EATURE D ELETION S UPPORT . . . . . . . . . . . . . . . . . . . . . . . . DATA I NTEGRITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M ANIPULATING ATTRIBUTE DATA . . . . . . . . . . . . . . . . . . . . . . . C HANGING THE L AYER D EFINITION . . . . . . . . . . . . . . . . . . . . . .
V IEWING A S INGLE B AND OF A M ULTIBAND R ASTER . . . . . . . . . . . . . . . . . . . . . . . . G ATHERING R ASTER S TATISTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O N WMS S ERVER URL S . . . . . . I MAGE E NCODING . . . . . . . . . . WMS L AYER O RDERING . . . . . . . WMS L AYER T RANSPARENCY . . . . WMS P ROJECTIONS . . . . . . . . . ACCESSING SECURED OGC- LAYERS QGIS WMS M APSERVER . . . . . . F INDING WFS S ERVERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CRS IN THE M AP L EGEND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P ROJECT P ROPERTIES D IALOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GRASS DATA L OADING . . . . . . . . . . . . . . . . . . . . . L EARNING THE GRASS V ECTOR M ODEL . . . . . . . . . . . C REATING AN ATTRIBUTE TABLE FOR A NEW GRASS VECTOR D IGITIZING POLYGONS IN GRASS . . . . . . . . . . . . . . . C REATING AN ADDITIONAL GRASS LAYER WITH QGIS . . . . . . . . . . . . . LAYER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
xiii
41 42 43 44 45 46 47 48 49
GRASS E DIT P ERMISSIONS . D ISPLAY RESULTS IMMEDIATELY T HE SIMPLIFY TOOL . . . . . . OTHER USES FOR R . CONTOUR
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
C RASHING P LUGINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 A DD MORE REPOSITORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 U SING EXPERIMENTAL PLUGINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 P LUGINS S ETTINGS S AVED TO P ROJECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 C REATING A VECTOR LAYER FROM A M ICROSOFT E XCEL W ORKSHEET . . . . . . . . . . . . . . 152
xiv
Foreword
Welcome to the wonderful world of Geographical Information Systems (GIS)! Quantum GIS (QGIS) is an Open Source Geographic Information System. The project was born in May of 2002 and was established as a project on SourceForge in June of the same year. Weve worked hard to make GIS software (which is traditionally expensive proprietary software) a viable prospect for anyone with basic access to a Personal Computer. QGIS currently runs on most Unix platforms, Windows, and OS X. QGIS is developed using the Qt toolkit (http://qt.nokia.com) and C++. This means that QGIS feels snappy to use and has a pleasing, easy-to-use graphical user interface (GUI). QGIS aims to be an easy-to-use GIS, providing common functions and features. The initial goal was to provide a GIS data viewer. QGIS has reached the point in its evolution where it is being used by many for their daily GIS data viewing needs. QGIS supports a number of raster and vector data formats, with new format support easily added using the plugin architecture. QGIS is released under the GNU General Public License (GPL). Developing QGIS under this license means that you can inspect and modify the source code, and guarantees that you, our happy user, will always have access to a GIS program that is free of cost and can be freely modied. You should have received a full copy of the license with your copy of QGIS, and you also can nd it in Appendix A. QGIS Tip 1 U P - TO - DATE D OCUMENTATION The latest version of this document can always be found at http://download.osgeo.org/qgis/doc/manual/, or in the documentation area of the QGIS website at http://www.qgis.org/en/documentation
Features
QGIS offers many common GIS functionalities provided by core features and plugins. As a short summary they are presented in six categories to gain a rst insight. View data You can view and overlay vector and raster data in different formats and projections without conversion to an internal or common format. Supported formats include: spatially-enabled tables using PostGIS and SpatiaLite, vector formats supported by the installed OGR library, including ESRI shapeles, MapInfo, SDTS, GML and many more. Raster and imagery formats supported by the installed GDAL (Geospatial Data Abstraction Library) library, such as GeoTiff, Erdas Img., ArcInfo Ascii Grid, JPEG, PNG and many more. SpatiaLite databases (see Section 4.3) GRASS raster and vector data from GRASS databases (location/mapset), see Section 9, Online spatial data served as OGC-compliant Web Map Service (WMS) or Web Feature Service (WFS), see Section 6, OpenStreetMap data (see Section 12.14). Explore data and compose maps You can compose maps and interactively explore spatial data with a friendly GUI. The many helpful tools available in the GUI include:
Foreword on the y projection map composer overview panel spatial bookmarks identify/select features edit/view/search attributes feature labeling change vector and raster symbology add a graticule layer - now via fTools plugin decorate your map with a north arrow scale bar and copyright label save and restore projects Create, edit, manage and export data You can create, edit, manage and export vector maps in several formats. Raster data have to be imported into GRASS to be able to edit and export them into other formats. QGIS offers the following: digitizing tools for OGR supported formats and GRASS vector layer create and edit shapeles and GRASS vector layers geocode images with the Georeferencer plugin GPS tools to import and export GPX format, and convert other GPS formats to GPX or down/upload directly to a GPS unit (on Linux, usb: has been added to list of GPS devices) visualize and edit OpenStreetMap data create PostGIS layers from shapeles with the SPIT plugin improved handling of PostGIS tables manage vector attribute tables with the new attribute table (see Section 4.5.6) or Table Manager plugin save screenshots as georeferenced images Analyse data You can perform spatial data analysis on PostgreSQL/PostGIS and other OGR supported formats using the fTools Python plugin. QGIS currently offers vector analysis, sampling, geoprocessing, geometry and database management tools. You can also use the integrated GRASS tools, which include the complete GRASS functionality of more than 400 modules (See Section 9). Publish maps on the Internet QGIS can be used to export data to a maple and to publish them on the Internet using a webserver with UMN MapServer installed. QGIS can also be used as a WMS or WFS client, and as WMS server. Extend QGIS functionality through plugins QGIS can be adapted to your special needs with the extensible plugin architecture. QGIS provides libraries that can be used to create plugins. You can even create new applications with C++ or Python! Core Plugins 1. Add Delimited Text Layer (Loads and displays delimited text les containing x,y coordinates) 2. Coordinate Capture (Capture mouse coordinates in different CRS) 3. Decorations (Copyright Label, North Arrow and Scale bar) 4. Diagram Overlay (Placing diagrams on vector layer) 5. Displacement Plugin (Handle point displacement in case points have the same position)
Features 6. Dxf2Shp Converter (Convert DXF to Shape) 7. GPS Tools (Loading and importing GPS data) 8. GRASS (GRASS GIS integration) 9. GDALTools (Integrate GDAL Tools into QGIS) 10. Georeferencer GDAL (Adding projection information to raster using GDAL) 11. Interpolation plugin (interpolate based on vertices of a vector layer) 12. Load PostGIS raster to QGIS 13. Mapserver Export (Export QGIS project le to a MapServer map le) 14. Ofine Editing (Allow ofine editing and synchronizing with database) 15. OpenStreetMap plugin (Viewer and editor for openstreetmap data) 16. Oracle Spatial GeoRaster support 17. Plugin Installer (Download and install QGIS python plugins) 18. QSpatiaLite (SpatiaLite GUI for SpatiaLite) 19. Random HR - Animove (Randomization of home ranges within a study area) 20. Raster terrain analysis (Raster based terrain analysis) 21. Road graph plugin (Shortest Path network analysis) 22. SPIT (Import Shapele to PostgreSQL/PostGIS) 23. SQL Anywhere Plugin (Store vector layers within a SQL Anywhere database) 24. Spatial Query Plugin (make spatial queries on vector layers) 25. WFS Plugin (Add WFS layers to QGIS canvas) 26. eVIS (Event Visualization Tool) 27. fTools (Tools for vector data analysis and management) 28. Python Console (Access QGIS environment) External Python Plugins QGIS offers a growing number of external python plugins that are provided by the community. These plugins reside in the ofcial PyQGIS repository, and can be easily installed using the Python Plugin Installer (See Section 11).
Whats new in version 1.7.0 Please note that this is a release in our cutting edge release series. As such it contains new features and extends the programmatic interface over QGIS 1.0.x and QGIS 1.6.0. We recommend that you use this version over previous releases. This release includes over 277 bug xes and many new features and enhancements. Symbology labels and diagrams New symbology now used by default! Diagram system that uses the same smart placement system as labeling-ng Export and import of styles (symbology-ng). Labels for rules in rule-based renderers. Font marker can have an X,Y offset. Line symbology: Option to put marker on the central point of a line.
Foreword Option to put marker only on rst/last vertex of a line. Allow the marker line symbol layer to draw markers on each vertex. Polygon symbology: Rotation for svg lls. Added centroid ll symbol layer which draws a marker on polygons centroid. Allow the line symbol layers to be used for outline of polygon (ll) symbols. Labels Ability to set label distance in map units. Move/rotate/change label edit tools to interactively change data dened label properties. New Tools Added GUI for gdaldem. Added eld calculator with functions like $x, $y and $perimeter. Added Lines to polygons tool to vector menu. Added voronoi polygon tool to Vector menu. User interface updates Allow managing missing layers in a list. Zoom to group of layers. Tip of the day on startup. You can en/disable tips in the options panel. Better organisation of menus, separate database menu added. Add ability to show number of features in legend classes. Accessible via right-click legend menu. General clean-ups and usability improvements. CRS Handling Show active crs in status bar. Assign layer CRS to project (in the legend context menu). Select default CRS for new projects. Allow setting CRS for multiple layers at once. Default to last selection when prompting for CRS. Rasters Added AND and OR operator for raster calculator On-the-y reprojection of rasters added! Proper implementation of raster providers. Added raster toolbar with histogram stretch functions. Providers and Data Handling New SQLAnywhere vector provider. Table join support Feature form updates Make NULL value string representation congurable. Fix feature updates in feature form from attribute table. Add support for NULL values in value maps (comboboxes). Use layer names instead of ids in drop down list when loading value maps from layers.
Features Support feature form expression elds: line edits on the form which name prex expr_ are evaluated. Their value is interpreted as eld calculator string and replaced with the calculated value. Support searching for NULL in attribute table. Attribute editing improvements Improved interactive attribute editing in table (adding/deleting features, attribute update). Allow adding of geometryless features. Fixed attribute undo/redo. Improved attribute handling. Optionally re-use entered attribute values for next digitized feature. Allow merging/assigning attribute values to a set of features. Allow OGR save as without attributes (for eg. DGN/DXF). Api and Developer Centric Refactored attribute dialog calls to QgsFeatureAttribute. Added QgsVectorLayer::featureAdded signal. Layer menu function added. Added option to load c++ plugins from user specied directories. Requires application restart to activate. Completely new geometry checking tool for fTools. Signicantly faster, more relevant error messages, and now supports zooming to errors. See the new QgsGeometry.validateGeometry function QGIS Server Ability to specify wms service capabilities in the properties section of the project le (instead of wms_metadata.xml le). Support for wms printing with GetPrint-Request. Plugins Support for icons of plugins in the plugin manager dialog. Removed quickprint plugin - use easyprint plugin rather from plugin repo. Removed ogr convertor plugin - use save as context menu rather. Printing Undo/Redo support for the print composer
Conventions
This section describes a collection of uniform styles throughout the manual. The conventions used in this manual are as follows:
GUI Conventions
The GUI convention styles are intended to mimic the appearance of the GUI. In general, the objective is to use the non-hover appearance, so a user can visually scan the GUI to nd something that looks like the instruction in the manual. Menu Options: Layer or Settings Tool: Toolbars Add a Raster Layer
Digitizing
Botton : Save as Default Dialog Box Title: Tab: General Toolbox : Checkbox: Radio Button: nviz - Open 3D-View in NVIZ Render Postgis SRID EPSG ID Layer Properties
Select a Number: Hue 60 Select a String: Outline style Browse for a File: . . . Select a Color: Outline color Slider: Transparency 10% lakes.shp 020mm Solid Line
Conventions
Platform-specic instructions
GUI sequences and small amounts of text can be formatted inline: Click { close QGIS. File QGIS} Quit to
This indicates that on Linux, Unix and Windows platforms, click the File menu option rst, then Quit from the dropdown menu, while on Macintosh OSX platforms, click the QGIS menu option rst, then Quit from the dropdown menu. Larger amounts of text may be formatted as a list:
or as paragraphs. Do this and this and this. Then do this and this and this and this and this and this and this and this and this. Do that. Then do that and that and that and that and that and that and that and that and that and that and that and that and that and that and that. Screenshots that appear throughout the user guide have been created on different platforms; the platform is indicated by the platform-specic iconsat the end of the gure caption.
1. Introduction To GIS
A Geographical Information System (GIS) ([3]1 ) is a collection of software that allows you to create, visualize, query and analyze geospatial data. Geospatial data refers to information about the geographic location of an entity. This often involves the use of a geographic coordinate, like a latitude or longitude value. Spatial data is another commonly used term, as are: geographic data, GIS data, map data, location data, coordinate data and spatial geometry data. Applications using geospatial data perform a variety of functions. Map production is the most easily understood function of geospatial applications. Mapping programs take geospatial data and render it in a form that is viewable, usually on a computer screen or printed page. Applications can present static maps (a simple image) or dynamic maps that are customised by the person viewing the map through a desktop program or a web page. Many people mistakenly assume that geospatial applications just produce maps, but geospatial data analysis is another primary function of geospatial applications. Some typical types of analysis include computing: 1. distances between geographic locations 2. the amount of area (e.g., square meters) within a certain geographic region 3. what geographic features overlap other features 4. the amount of overlap between features 5. the number of locations within a certain distance of another 6. and so on... These may seem simplistic, but can be applied in all sorts of ways across many disciplines. The results of analysis may be shown on a map, but are often tabulated into a report to support management decisions. The recent phenomena of location-based services promises to introduce all sorts of other features, but many will be based on a combination of maps and analysis. For example, you have a cell phone that tracks your geographic location. If you have the right software, your phone can tell you what kind of restaurants are within walking distance. While this is a novel application of geospatial technology, it is essentially doing geospatial data analysis and listing the results for you.
chapter is by Tyler Mitchell (http://www.oreillynet.com/pub/wlg/7053) and used under the Creative Commons License. Tyler is the author of Web Mapping Illustrated, published by OReilly, 2005.
1.1. Why is all this so new? How is geospatial data stored? In a nutshell, there are two types of geospatial data in widespread use today. This is in addition to traditional tabular data that is also widely used by geospatial applications.
10
2. Getting Started
This chapter gives a quick overview of installing QGIS, some sample data from the QGIS web page and running a rst and simple session visualizing raster and vector layers.
2.1. Installation
Installation of QGIS is very simple. Standard installer packages are available for MS Windows and Mac OS X. For many avors of GNU/Linux binary packages (rpm and deb) or software repositories to add to your installation manager are provided. Get the latest information on binary packages at the QGIS website at http://download.qgis.org. Installation from source If you need to build QGIS from source, please refer to the coding and compiling guide available at http: //www.qgis.org/en/documentation/manuals.html. The installation instructions are also distributed with the QGIS source code. Installation on external media QGIS allows to dene a congpath option that overrides the default path (e.g. /.qgis under Linux) for user conguration and forces QSettings to use this directory, too. This allows users to e.g. carry a QGIS installation on a ash drive together with all plugins and settings.
11
2.3. Sample Session AUTHORITY["EPSG","7008"]], TOWGS84[-3,142,183,0,0,0,0], AUTHORITY["EPSG","6267"]], PRIMEM["Greenwich",0, AUTHORITY["EPSG","8901"]], UNIT["degree",0.0174532925199433, AUTHORITY["EPSG","9108"]], AUTHORITY["EPSG","4267"]], PROJECTION["Albers_Conic_Equal_Area"], PARAMETER["standard_parallel_1",55], PARAMETER["standard_parallel_2",65], PARAMETER["latitude_of_center",50], PARAMETER["longitude_of_center",-154], PARAMETER["false_easting",0], PARAMETER["false_northing",0], UNIT["us_survey_feet",0.3048006096012192]] If you intend to use QGIS as graphical frontend for GRASS, you can nd a selection of sample locations (e.g. Spearsh or South Dakota) at the ofcial GRASS GIS website http://grass.osgeo.org/download/data.php.
Load raster and vector layers from the sample dataset 1. Click on the Load Raster icon.
2. Browse to the folder qgis_sample_data/raster/, select the ERDAS Img le landcover.img and click Open . 3. If the le is not listed, check if the Filetype combobox at the bottom of the dialog is set on the right type, in this case "Erdas Imagine Images (*.img, *.IMG)" 4. Now click on the 5. File Load Vector icon. Add Vector Layer dialog. Now click
Browse to select the vector layer. 6. Browse to the folder qgis_sample_data/gml/, select "GML" from the letype combobox, then select the GML le lakes.gml and click Open , then in Add Vector dialog click OK . 7. Zoom in a bit to your favorite area with some lakes.
12
8. Double click the lakes layer in the map legend to open the Properties dialog. 9. Click on the Style tab and select a blue as ll color. 10. Click on the Labels tab and check the Display labels checkbox to enable labeling. Choose
NAMES eld as eld containing label. 11. To improve readability of labels, you can add a white buffer around them, by clicking Buffer in the list on the left, checking Buffer labels? and choosing 3 as buffer size.
12. Click Apply , check if the result looks good and nally click OK . You can see how easy it is to visualize raster and vector layers in QGIS. Lets move on to the sections that follow to learn more about the available functionality, features and settings and how to use them.
13
3. Features at a Glance
After a rst and simple sample session in Section 2 we now want to give you a more detailed overview of the features of QGIS. Most features presented in the following chapters will be explained and described in own sections later in the manual.
Assuming that QGIS is installed in the PATH, you can start QGIS by typing: qgis at a command prompt or by double clicking on the QGIS application link (or shortcut) on the desktop or in the application menu. Start QGIS using the Start menu or desktop shortcut, or double click on a QGIS project le. Double click the icon in your Applications folder. If you need to start QGIS in a shell, run /path-toinstallation-executable/Contents/MacOS/Qgis. File QGIS} Quit, or use the shortcut Ctrl+Q .
15
QGIS Tip 2 E XAMPLE U SING COMMAND LINE ARGUMENTS You can start QGIS by specifying one or more data les on the command line. For example, assuming you are in the qgis_sample_data directory, you could start QGIS with a vector layer and a raster le set to load on startup using the following command: qgis ./raster/landcover.img ./gml/lakes.gml
Command line option -snapshot This option allows you to create a snapshot in PNG format from the current view. This comes in handy when you have a lot of projects and want to generate snapshots from your data. Currently it generates a PNG-le with 800x600 pixels. This can be adapted using the -width and -height command line arguments. A lename can be added after -snapshot. Command line option -lang Based on your locale QGIS, selects the correct localization. If you would like to change your language, you can specify a language code. For example: -lang=it starts QGIS in italian localization. A list of currently supported languages with language code and status is provided at http://www.qgis.org/wiki/ GUI_Translation_Progress Command line option -project Starting QGIS with an existing project le is also possible. Just add the command line option -project followed by your project name and QGIS will open with all layers loaded described in the given le. Command line option -extent To start with a specic map extent use this option. You need to add the bounding box of your extent in the following order separated by a comma: --extent xmin,ymin,xmax,ymax Command line option -nologo This command line argument hides the splash screen when you start QGIS. Command line option -noplugins If you have trouble at startup with plugins, you can avoid loading them at startup. They will still be available in Plugins Manager afterwards. Command line option -optionspath You can have multiple congurations and decide which one to use when starting QGIS using this option. See 3.7 to check where does the operating system save the settings les. Presently there is no way to specify in which le where to write the settings, therefore you can create a copy of the original settings le and rename it. Command line option -configpath This option is similar to the one above, but furthermore overrides the default path ( /.qgis) for user conguration and forces QSettings to use this directory, too. This allows users to e.g. carry QGIS installation on a ash drive together with all plugins and settings
16
(KDE)
Note: Your window decorations (title bar, etc.) may appear different depending on your operating system and window manager. The QGIS GUI is divided into six areas: 1. Menu Bar 4. Map View 2. Tool Bar 5. Map Overview 3. Map Legend 6. Status Bar These six components of the QGIS interface are described in more detail in the following sections. Two more sections present keyboard shortcuts and context help.
File New Project Open Project Open Recent Projects Save Project Ctrl+N Ctrl+O see Section 3.5 see Section 3.5 see Section 3.5 see Section 3.5 File
using the Congure Shortcuts
File File
I
Ctrl+S
1 Keyboard shortcuts can now be congured manually (shortcuts presented in this section are the defaults),
17
Save Project As Save as Image New Print Composer Composer manager Print Composers Exit
Ctrl+Shift+S
File
Ctrl+P
File File
I
Ctrl+Q
see Section 10
Edit Undo Redo Cut Features Copy Features Paste Features Move Feature Delete Selected Simplify Feature Add Ring Add Part Delete Ring Delete Part Reshape Features Split Features Merge selected Features Merge attributes of selected Features Node Tool Rotate Point Symbols Ctrl+Z Ctrl+Shift+Z Ctrl+X Ctrl+C Ctrl+V see Section 4.5.4 see Section 4.5.4 see Section 4.5.3 see Section 4.5.3 see Section 4.5.3 see Section 4.5.3 see Section 4.5.3 see Section 4.5.4 see Section 4.5.4 see Section 4.5.4 see Section 4.5.4 see Section 4.5.4 see Section 4.5.4 see Section 4.5.4 see Section 4.5.4 see Section 4.5.4 see Section 4.5.3 see Section 4.5.4 Advanced Digitizing Advanced Digitizing Digitizing Digitizing Digitizing Digitizing Digitizing Advanced Digitizing Advanced Digitizing Advanced Digitizing Advanced Digitizing Advanced Digitizing Advanced Digitizing Advanced Digitizing Advanced Digitizing Advanced Digitizing Digitizing Advanced Digitizing
After activating
Toggle editing mode for a layer, you will nd a capture feature icon in the Edit
18
Ctrl++ Ctrl+-
Map Navigation Map Navigation see Section 3.4.2 Attributes Attributes see Section 3.4 Attributes Map Navigation Map Navigation
I
Ctrl-Shift-I
Identify Features Measure Zoom Full Zoom To Layer Zoom To Selection Zoom Last Zoom Next Zoom Actual Size Map Tips New Bookmark Show Bookmarks Refresh Tile scale slider Live GPS tracking
I
Ctrl-Shift-F
Ctrl+J
Layer New
I
Ctrl+Shift+V Ctrl+Shift+R Ctrl+Shift+D Ctrl+Shift+L Ctrl+Shift+W
see Section 4.5.5 see Section 4 see Section 5 see Section 4.2 see Section 4.3 see Section 6.2
Manage Layers Manage Layers Manage Layers Manage Layers Manage Layers Manage Layers Attributes Digitizing Digitizing
Add Vector Layer Add Raster Layer Add PostGIS Layer Add SpatiaLite Layer Add WMS Layer Open Attribute Table Save edits Toggle editing Save as... Save selection as vector le... Remove Layer Set CRS of Layer(s) Set project CRS from Layer Properties Query... Labeling
19
Add to Overview Add All To Overview Remove All From Overview Show All Layers Hide All Layers
Ctrl+Shift+O
Manage Layers
Ctrl+Shift+U Ctrl+Shift+H
Settings Panels I Toolbars I Toggle Full Screen Mode Project Properties Custom CRS Style Manager Congure shortcuts Options Snapping Options
Plugins - (Futher menu items are added by plugins as they are loaded.) Manage Plugins Python Console Raster Raster calculator Help Help Contents API Documentation QGIS Home Page Check QGIS Version About QGIS Sponsors Ctrl+H F1 Help see Section 5.4 see Section 11.1 Plugins
Note: The Menu Bar items listed above are the default ones in KDE window manager. In GNOME, Settings menu is missing and its items are to be found there: Project Properties Options Congure Shortcuts Style Manager Custom CRS File menu Edit Edit Edit Edit
20
3.2.2. Toolbars
Panels Toolbars
I I
Toggle Full Screen Mode Tile scale slider Live GPS tracking
3.2.2. Toolbars
The toolbars provide access to most of the same functions as the menus, plus additional tools for interacting with the map. Each toolbar item has popup help available. Hold your mouse over the item and a short description of the tools purpose will be displayed. Every menubar can be moved around according to your needs. Additionally every menubar can be switched off using your right mouse button context menu holding the mouse over the toolbars. QGIS Tip 3 R ESTORING
TOOLBARS
If you have accidentally hidden all your toolbars, you can get them back by choosing menu option Settings Toolbars
Zoom to best scale (100%) Show in overview Remove Properties Rename Add Group Expand all
I I
I I I
21
I I I
I I I I I I I
Save selection as Query Properties Rename Add Group Expand all Collapse all
I I
Set group CRS Rename Add Group Expand all Collapse all
I I I I
It is possible to select more than one Layer or Group at the same time by holding down the CTRL -Key while selecting the Layers with the left mouse button. You can than move all selected Layers to a new Group at the same time. You are also able to delete more than one Layer or Group at once by selecting several Layers with the CTRL -Key and pressing Layerlist. CTRL-D afterwards. This way all selected Layers or Groups will be removed from the
22
3.2.5. Map Overview QGIS Tip 4 Z OOMING THE M AP WITH THE M OUSE W HEEL You can use the mouse wheel to zoom in and out on the map. Place the mouse cursor inside the map area and roll the wheel forward (away from you) to zoom in and backwards (towards you) to zoom out. The mouse cursor position is the center where the zoom occurs. You can customize the behavior of the mouse wheel Options I menu. zoom using the Map tools tab under the Settings QGIS Tip 5 PANNING THE M AP WITH THE A RROW K EYS AND S PACE B AR You can use the arrow keys to pan in the map. Place the mouse cursor inside the map area and click on the right arrow key to pan East, left arrow key to pan West, up arrow key to pan North and down arrow key to pan South. You can also pan the map using the space bar: just move the mouse while holding down space bar.
icon in the lower right-hand corner of the statusbar. In the last case, the
units are set to what the project projection species, e.g. +units=m.
23
3.3. Rendering
(KDE)
Conguration is very simple. Just select a feature from the list and click on Change , Set none
or
Set default . Once you have found your conguration, you can save it as XML le and load it to another QGIS installation.
3.3. Rendering
By default, QGIS renders all visible layers whenever the map canvas must be refreshed. The events that trigger a refresh of the map canvas include:
Adding a layer Panning or zooming Resizing the QGIS window Changing the visibility of a layer or layers
24
Render box is not checked, QGIS does not redraw the canvas in response to any of the events described in Section 3.3. Examples of when you might want to suspend rendering include:
Add many layers and symbolize them prior to drawing Add one or more large layers and set scale dependency before drawing Add one or more large layers and zoom to a specic view before drawing Any combination of the above
Checking the Render box enables rendering and causes and immediate refresh of the map canvas. b) Setting Layer Add Option You can set an option to always load new layers without drawing them. This means the layer will be added to the map, but its visibility checkbox in the legend will be unchecked by default. To set this option, choose menu Options I and click on the Rendering tab. Uncheck the option Settings By default new layers added to the map should be displayed checkbox. Any layer added to the map will be off (invisible) by default. c) Updating the Map Display During Rendering You can set an option to update the map display as features are drawn. By default, QGIS does not display any features for a layer until the entire layer has been rendered. To update the display as features are read Options I click on the Rendering tab. Set from the datastore, choose menu option Settings the feature count to an appropriate value to update the display during rendering. Setting a value of 0 disables update during drawing (this is the default). Setting a value too low will result in poor performance as the map canvas is continually updated during the reading of the features. A suggested value to start with is 500. d) Inuence Rendering Quality To inuence the rendering quality of the map you have 3 options. Choose menu option Settings Options
Make lines appear less jagged at the expense of some drawing performance Fix problems with incorrectly lled polygons
3.4. Measuring
Measuring works within projected coordinate systems only (e.g., UTM). If the loaded map is dened with a geographic coordinate system (latitude/longitude), the results from line or area measurements will be incorrect. To x this you need to set an appropriate map coordinate system (See Section 8). All measuring modules also use the snapping settings from the digitizing module. This is useful, if you want to measure along lines or areas in vector layers. To select a measure tool click on and select the tool you want to use.
25
3.5. Projects
Select features Select features by rectangle Select features by polygon Select features by freehand Select features by radius To deselect all selected features click on .
3.5. Projects
The state of your QGIS session is considered a Project. QGIS works on one project at a time. Settings are either considered as being per-project, or as a default for new projects (see Section 3.7). QGIS can save the state of your workspace into a project le using the menu options File Save Project As . Save Project or File
26
Load saved projects into a QGIS session using File Open Recent Project
If you wish to clear your session and start fresh, choose File New Project . Either of these menu options will prompt you to save the existing project if changes have been made since it was opened or last saved. The kinds of information saved in a project le include:
Layers added Layer properties, including symbolization Projection for the map view Last viewed extent
The project le is saved in XML format, so it is possible to edit the le outside QGIS if you know what you are doing. The le format was updated several times compared to earlier QGIS versions. Project les from older QGIS versions may not work properly anymore. To be made aware of this, in the General tab under Settings Options
Promt to save project changes when required Warn when opening a project le saved with an older version of QGIS Project Properties In the properties window for the project under Project Properties
File
Project Properties
or
Settings
In the The
General tab the project title, selection and background color, layer units, precision, and the option to save relative paths to layers can be dened. You can dene the layer units (only used when CRS transformation is disabled) and the precision of decimal places to use.
CRS Coordinate Reference System tab enables you to choose the CRS for this project, and to enable on-the-y reprojection of raster and vector layers when displaying layers from a different CRS. Identiable layers tab you set (or disable) which layers will respond to the identify tool. (See the Map tools paragraph from the 3.7 section to enable identifying of multiple layers.) WMS Server allows to dene information about the QGIS mapserver Service Capabilities, the Add WKT geometry to feature info response will
Extend and the CRS Restrictions. Activating the allow to query the WMS layers.
3.6. Output
There are several ways to generate output from your QGIS session. We have discussed one already in Section 3.5: saving as a project le. Here is a sampling of other ways to produce output les:
Menu option
Menu option
Save as Image opens a le dialog where you select the name, path and type of image (PNG or JPG format). A world le with extension PNGW or JPGW saved in the same folder georeferences the image. New Print Composer opens a dialog where you can layout and print the current map canvas (see Section 10).
27
Some basic options for QGIS can be selected using the Settings General Tab
Options
Options . The tabs where you can optmize your options are:
Promt to save project changes when required Warn when opening a project le saved with an older version of QGIS Change Selection and background Color Change the icon theme (choose between default, classic, gis and newgis) Change icon size between 16, 24 and 32 pixel. Dene double click action in legend (choose between open layer properties and open ) attribute table. Capitalise layer names in legend Display classication attribute names in legend Create raster icons in legend Hide splash screen at startup Open identify results in a dock window (QGIS restart required) Open snapping options in a dock window (QGIS restart required) Open attribute table in a dock window Add PostGIS layers with double click and select in extended mode Add new layers to selected group Attribute table behavior (choose between Show all features (default), Show selected features, show features in current canvas) Dene representation for NULL values Add path(s) to search for additional C++ plugin libraries. By default new layers added to the map should be displayed Dene number of features to draw before updating the display. Use render caching where possible to speed up redraws Make lines appear less jagged at the expense of some drawing performance Fix problems with incorrectly lled polygons Use new generation symbology for rendering Add/remove path(s) to search for Scalable Vector Graphics (SVG) symbols
Project Properties menu.
Rendering Tab
Additionally you can dene wether to save the path for svg textures absolute or relative in the General tab of the Settings
28
The Mode setting determines which layers will be shown by the Identify tool. By switching to Top down or Open feature form, if a single feature is identied Dene search radius for identifying and displaying map tips as a percentage of the map width Dene ellipsoid for distance calculations Dene rubberband color for measure tools Dene decimal places Keep base unit Dene preferred measurement units (meters or feet) Dene preferred angle units (Degrees, Radians or Gon) Dene Mouse wheel action (Zoom, Zoom and recenter, Zoom to mouse cursor, Nothing) Dene Zoom factor for wheel mouse
Top down, stop at first instead of Current layer attributes for all identiable layers (see the Project properties section under: 3.5 to set which layers are identiable) will be shown with the Identify tool.
Overlays Tab
Dene placement algorithm for labels (choose between central point (standard), chain, popmusic tabu
chain, popmusic tabu and popmusic chain)
Digitizing Tab
Dene Rubberband line color and line width Dene default snap mode (to vertex, to segment, to vertex and segment) Dene default snapping tolerance in map units or pixel Dene search radius for vertex edits in map units or pixel Show markers only for selected features Dene vertex marker style (cross (default), semi transparent circle or none) and vertex marker size. Reuse last entered attribute values Suppress attributes pop-up windows after each created feature Select a CRS and always start new projects with this CRS. Enable on the y reprojecion by default
Prompt for Coordinate Reference System (CRS) Project wide default Coordinate Reference System (CRS) will be used Global default Coordinate Reference System (CRS) displayed below will be used
CRS Tab The CRS tab is devided in two areas. The rst area allows to dene the default CRS for new projects.
The second area allows to dene the action, when a new layer is created, or when a layer without CRS is loaded.
Locale Tab
Overwrite system locale and use dened locale instead Information about active system locale
29
Use proxy for web access and dene host, port, user, and password. Set the Proxy type I according to your needs
Default Proxy : Generic proxy for any kind of connection. Supports TCP, UDP, binding to Socks5Proxy a port (incoming connections) and authentication.
I I
I : Implemented using the "CONNECT" command, supports only outgoing TCP HttpProxy connections; supports authentication. I : Implemented using normal HTTP commands, it is useful only in the HttpCachingProxy context of HTTP requests I
Dene Cache settings (path and size) Dene WMS search adress, default is http://geopole.org/wms/search?search=%1&type=rss Dene timeout for network requests in ms - default is 60000
Excluding some URLs can be added to the textbox below the proxy-settings (see g. 3.4) by pressing the Add -button. After that double-click into the just created URL-eld and enter the URL you would like to exclude from using the proxy. Obviously the button Remove removes the selected entry. If you need more detailed information about the different proxy-settings, please refer to the manual of the unterlaying QT-library-documentation at http://doc.trolltech.com/4.5/qnetworkproxy.html# ProxyType-enum.
30
QGIS Tip 7 U SING P ROXIES Using proxies can sometimes be tricky. It is useful to trial and error the above proxy types and check if they succeed in your case.
You can modify the options according to your needs. Some of the changes may require a restart of QGIS before they will be effective.
settings are saved in a texle: $HOME/.cong/QuantumGIS/qgis.conf you can nd your settings in: $HOME/Library/Preferences/org.qgis.qgis.plist settings are stored in the registry under: \\HKEY\CURRENT_USER\Software\QuantumGIS\qgis
Figure 3.5.: Annotation text dialog Double click on the item opens a dialog with various options. There is the text editor to enter the formated text and other item settings. E.g. there is the choice of having the item placed on a map position (displayed by a marker symbol) or to have the item on a screen position (not related to the map). The item can be moved by map position (drag the map marker) or by moving only the balloon. The icons are part of gis theme, and are used by default in the other themes too. The move annotation tool allows to move the annotation on the map canvas.
31
3.8. Annotation Tools for the identify tool, but displayed in an annotation item. Also see QGIS blog http://blog.qgis.org/node/ 143 for more information.
Figure 3.6.: Customized qt designer annotation form Note: If you press Ctrl-T while an annotation tool is active (move annotation, text annotation, form annotation), the visibility states of the items are inverted.
32
or press Ctrl-B .
3. Enter a descriptive name for the bookmark (up to 255 characters). 4. Click OK to add the bookmark or Cancel to exit without adding the bookmark. Note that you can have multiple bookmarks with the same name.
. The
Geospatial Bookmarks dialog allows you to zoom to or delete a bookmark. You can not edit the bookmark name or coordinates.
. You will
There are 4 possible screens in this GPS tracking window (see Figure 3.7 and Figure 3.8). (a) (b) (c) (d) GPS position coordinates and for manually entering Vertices and Features GPS signal strength of satellite connections GPS polar screen showing number and polar position of satellites GPS options screen (see Figure 3.8).
With a plugged in GPS receiver (has to be supported by your operating system) a simple click on Connect connects the GPS to QGIS. A second click (now Disconnect disconnects the GPS-Reciever from you Computer. For GNU/Linux gpsd support is integrated to support connection to most GPS receivers. Therefore you rst have to congure gpsd properly to connect QGIS to it. [ IMPORTANT ]: If you want to record your position to the canvas you have to create a new vector layer rst and switch it to editable status to be able to record your track.
33
and select the path/port your GPS receiver is connected to. A click on Connect again initiates the connection to the GPS receiver. With the slider GPS Cursor Size 10% you can shrink and grow the position cursor on
the canvas. Activating Auto-add vertices within GPS digitizing your track will automatically be recorded in the active vector layer (of course the layer has to be in edit mode). With GPS map recenter you can decide in which way the canvas will be updated if your recorded coordinates start either to move out of canvas or there is any change at all. Track color and width sets the color of and the width of your drawn track. If you want to set a feature manually you have to go back to Add feature . Position Coordinates and click on
34
35
Ctrl-Shift-V . This will bring up a new window (see Figure 4.1). From the available options check
1 GRASS
File . Click on Browse . That will bring up a standard open le dialog (see Figure 4.2) which allows you to navigate the le system and load a shapele or other supported
vector and PostgreSQL support is supplied by native QGIS data provider plugins.
37
...
You can also select the Encoding type for the shapele if desired. Selecting a shapele from the list and clicking Open loads it into QGIS. Figure 4.3 shows QGIS after loading the alaska.shp le. QGIS Tip 8 L AYER C OLORS When you add a layer to the map, it is assigned a random color. When adding more than one layer at a time, different colors are assigned to each layer. Once loaded, you can zoom around the shapele using the map navigation tools. To change the style of a layer, open the Layer Properties dialog by double clicking on the layer name or by right-clicking on the name in the legend and choosing Properties information on setting symbology of vector layers. QGIS Tip 9 L OAD
OS X
On OS X, portable drives that are mounted besides the primary hard drive do not show up under File Open Project as expected. We are working on a more OSX-native open/save dialog to x this. As a workaround you can type /Volumes in the File name box and press return. Then you can navigate to external drives and network mounts.
38
To load a MapInfo layer, click on the , change the le type lter to Files of Type .TAB or .tab layer you want to load.
Add Vector Layer toolbar bar button or type Ctrl-Shift-V [OGR] MapInfo (*.mif *.tab *.MIF *.TAB) and select the
To load an ArcInfo binary coverage, click on the type Type it. Ctrl-Shift-V to open the Add Vector Layer dialog.
Directory
. Navigate to the directory that contains the coverage les and select
Similarly, you can load directory based vector les in the UK National Transfer Format as well as the raw TIGER Format of the US Census Bureau.
39
The rst time you use a PostGIS data source, you must create a connection to the PostgreSQL database that contains the data. Begin by clicking on the Add PostGIS Layer... Add Vector Layer option from the Layer Add PostGIS Layer menu or typing toolbar button, selecting the . You can also open the dialog will be dis-
Ctrl-Shift-D
Database . The
played. To access the connection manager, click on the New button to display the Create a New PostGIS Connection dialog. The parameters required for a connection are shown in table 4.1. Optional you can activate follwing checkboxes:
Save Username Save Password Only look in the geometry_columns table Only look in the public schema Also list tables with no geometry Use estimated table metadata
Once all parameters and options are set, you can test the connection by clicking on the Test Connect button.
40
Table 4.1.: PostGIS Connection Parameters Name Service Host A name for this connection. Can be the same as Database. Service parameter to be used alternatively to hostname/port (and potentially database). This can be dened in pg_service.conf Name of the database host. This must be a resolvable host name the same as would be used to open a telnet connection or ping the host. If the database is on the same computer as QGIS, simply enter localhost here. Port number the PostgreSQL database server listens on. The default port is 5432. Name of the database. How the SSL connection will be negotiated with the server. These are the options:
disable: only try an unencrypted SSL connection; allow: try a non-SSL connection, if that fails, try an SSL connection; prefer (the default): try an SSL connection, if that fails, try a non-SSL con require: only try an SSL connection.
nection;
Username Password
Note that massive speedups in PostGIS layer rendering can be achieved by disabling SSL in the connection editor. User name used to login to the database. Password used with Username to connect to the database.
AND
Your customized settings for QGIS are stored based on the operating system.
, the settings are stored in the registry. Depending on your computing your home directory in .QGIS/. environment, storing passwords in your QGIS settings may be a security risk.
Once you have one or more connections dened, you can load layers from the PostgreSQL database. Of course this requires having data in PostgreSQL. See Section 4.2.4 for a discussion on importing data into the database. To load a layer from PostGIS, perform the following steps: If the Add PostGIS Table(s) dialog is not already open, click on the bar button. Choose the connection from the drop-down list and click Connect . Select or unselect Optionally use some Also list tables with no geometry Search Options to dene which features to load from the layer or use the Add PostGIS Layer tool-
Build query icon to start the Query builder dialog. Find the layer(s) you wish to add in the list of available layers. Select it by clicking on it. You can select multiple layers by holding down the shift key while clicking. See Section 4.6 for information on using the PostgreSQL Query Builder to further dene the layer. Click on the Add button to add the layer to the map.
41
4.2. PostGIS Layers QGIS Tip 11 P OST GIS L AYERS Normally a PostGIS layer is dened by an entry in the geometry_columns table. From version 1.6.0 on, QGIS can load layers that do not have an entry in the geometry_columns table. This includes both tables and views. Dening a spatial view provides a powerful means to visualize your data. Refer to your PostgreSQL manual for information on creating views.
SPIT Plugin QGIS comes with a plugin named SPIT (Shapele to PostGIS Import Tool). SPIT can be used to load multiple shapeles at one time and includes support for schemas. To use SPIT, open the Plugin Manager from the Plugins menu, check the box next to the SPIT plugin and click OK . The SPIT icon will be added to the plugin toolbar. To import a shapele, click on the SPIT tool in the toolbar to open the
SPIT - Shapele to PostGIS Import Tool dialog. Select the PostGIS database you want to connect to and
42
4.2.5. Improving Performance click on Connect . If you want, you can dene or change some import options. Now you can add one or more les to the queue by clicking on the Add button. To process the les, click on the OK button. The progress of the import as well as any errors/warnings will be displayed as each shapele is processed. QGIS Tip 13 I MPORTING S HAPEFILES C ONTAINING P OSTGRE SQL R ESERVED W ORDS If a shapele is added to the queue containing elds that are reserved words in the PostgreSQL database a dialog will popup showing the status of each eld. You can edit the eld names prior to import and change any that are reserved words (or change any other eld names as desired). Attempting to import a shapele with reserved words as eld names will likely fail. ogr2ogr Beside shp2pgsql and SPIT there is another tool for feeding geodata in PostGIS: ogr2ogr. This is part of your GDAL installation. To import a shapele into PostGIS, do the following: ogr2ogr -f "PostgreSQL" PG:"dbname=postgis host=myhost.de user=postgres \ password=topsecret" alaska.shp This will import the shapele alaska.shp into the PostGIS-database postgis using the user postgres with the password topsecret on host myhost.de. Note that OGR must be built with PostgreSQL to support PostGIS. You can see this by typing ogrinfo --formats | grep -i post If you like to use PostgreSQLs COPY-command instead of the default INSERT INTO method you can export the following environment-variable (at least available on export PG_USE_COPY=YES ogr2ogr does not create spatial indexes like shp2pgsl does. You need to create them manually using the normal SQL-command CREATE INDEX afterwards as an extra step (as described in the next section 4.2.5). and ):
2 GiST
43
4.2. PostGIS Layers \q to quit gis_data=# CREATE INDEX sidx_alaska_lakes ON alaska_lakes gis_data-# USING GIST (the_geom GIST_GEOMETRY_OPS); CREATE INDEX gis_data=# VACUUM ANALYZE alaska_lakes; VACUUM gis_data=# \q gsherman@madison:~/current$
Figure 4.4.: Map in lat/lon crossing the 180 longitude line A workaround is to transform the longitude values using PostGIS and the ST_Shift_Longitude 3 function. This function reads every point/vertex in every component of every feature in a geometry, and if the longitude coordinate is < 0 adds 360 to it. The result would be a 0 - 360 version of the data to be plotted in a 180 centric map.
Figure 4.5.: Map crossing 180 longitude applying the ST_Shift_Longitude function Usage Import data to PostGIS (4.2.4) using for example the PostGIS Manager plugin or the SPIT plugin Use the PostGIS command line interface to issue the following command (this is an example where "TABLE" is the actual name of your PostGIS table) gis_data=# update TABLE set the_geom=ST_shift_longitude(the_geom);
3 http://postgis.refractions.net/documentation/manual-1.4/ST_Shift_Longitude.html
44
If everything went right you should receive a conrmation about the number of features that were updated, then youll be able to load the map and see the difference (Figure 4.5)
Layer menu or by typing L . This will bring up a window, which will allow you to either connect to a SpatiaLite database already known to QGIS, which you can choose from the dropdown menu or to dene a new connection to a new database. To dene a new connection, click on New and use the le browser to point to your SpatiaLite database, which is a le with a .sqlite extension. If you want to save a vector layer to SpatiaLite format you can do this by right clicking the layer in the legend. Then click on Save as I , dene the name of the output le, sqlite as format and the CRS and then add SPATIALITE=YES in the OGR data source creation option eld. This tells OGR to create a SpatiaLite database. See also http://www.gdal.org/ogr/drv_sqlite.html. Creating a new SpatiaLite layer If you want to create a new SpatiaLite layer, please refer to section 4.5.5. QGIS Tip 14 S PATIA L ITE DATA MANAGEMENT P LUGIN For SpatiaLite data management you can also use the Python Plugin QspatiaLite from the QGIS Contributed Repository. It can be downloaded and integrated with the Python Plugin Installer and provides QGIS integration (import QGIS layers, View Spatial Tables and Queries in QGIS) a SQL editor with syntax highlighting and autocompletion and a SQL Query Builder to build complex queries plus further functionality.
45
Available symbol layer types Point layers Font marker: Rendering with a font. Simple marker: Rendering with a hardcoded marker. SVG marker: Rendering with a SVG picture. Line layers Line decoration: Add a line decoration, e.g an arrow to indicate line direction. Marker line: A line rendered by repeating a marker symbol. Simple line: Usual rendering of a line (with specied width, color and pen style). Polygon layers Centroid ll: Fill a polygon centroid with a hardcoded marker. SVG ll: Fill a polygon with a SVG symbol. Simple ll: Usual rendering of a polygon (with dened ll color, ll pattern and outline). Outline: Line decoration: Add a line decoration, e.g an arrow to indicate line direction. Outline: Marker line: Use a hardcoded marker as area outline. Outline: Simple line: Dene width, color and pen style as area outline. Color ramps Color ramps are used to dene a range of colors that can be used during the creation of renderers. The symbols color will be set from the color ramp. There are three types of color ramps: Gradient: Linear gradient from one color to some other.
46
4.4.2. Working with the New Generation Symbology Random: Randomly generated colors from a specied area of color space. ColorBrewer: Create color area from a color shema and a dened number of color classes. Color ramps can be dened in the Color ramp tab of the Style Manager (see Section 4.4.3) by clicking the Add button and then choosing a color ramp type. Styles A style groups a set of various symbols and color ramps. You can dene your prefered or frequently used symbols, and can use it without having to recreate it everytime. Style items (symbols and color ramps) have always a name by which they can be queried from the style. There is at least one default style in QGIS (modiable) and the user can add further styles. Renderers The renderer is responsible for drawing a feature together with the correct symbol. There are four types of renderers: single symbol, categorized (called unique color in the old symbology), graduated and rule-based. There is no continuous color renderer, because it is in fact only a special case of the graduated renderer. The categorized and graduated renderer can be created by specifying a symbol and a color ramp - they will set the colors for symbols appropriately.
47
selected attributes together, including the symbols that will be rendered. The example in gure 4.8 shows the category rendering dialog used for the rivers layer of the QGIS sample dataset. You can create a custom color ramp choosing New color ramp... from the Color ramp dropdown menu. A dialog will prompt for the ramp type: Gradient, Random, ColorBrewer, then each one has options for number of steps and/or multiple stops in the color ramp. See 4.9 for an example of custom color ramp. Graduated Renderer The Graduated Renderer is used to render all the features from a layer, using a single user-dened symbol, whose color reects the classication of a selected features attribute to a class. Like Categorized Renderer, it allows to dene rotation and size scale from specied columns. Analogue to the categorized rendered, the Style tab allows you to select: The attribute (using the Column listbox) The symbol (using the Symbol Properties button) The colors (using the Color Ramp list) Additionally, you can specify the number of classes and also the mode how to classify features inside the classes (using the Mode list). The available modes are:
Equal Interval Quantile Natural Breaks (Jenks) Standard Deviation Pretty Breaks
The listbox in the bottom part of the Style tab lists the classes together with their ranges, labels and symbols
48
that will be rendered. The example in gure 4.10 shows the graduated rendering dialog for the rivers layer of the QGIS sample dataset. Rule-based rendering The rule-based renderer is used to render all the features from a layer, using rule based symbols, whose color reects the classication of a selected features attribute to a class. The rules are based on SQL statements. You can also use the Query Builder to create them. The dialog allows rule grouping by lter or scale and you can decide if you want to enable symbol levels or use only rst matched rule. The example in gure 4.11 shows the rule-based rendering dialog for the rivers layer of the QGIS sample dataset. Point displacement The point displacement renderer is only available, if you load the Displacement plugin in the QGIS Plugin Manager. It offers to visualize all features of a point layer, even if they have the same location. To do this, the symbols of the points are placed on a displacement circle around a center symbol. Symbol Properties The symbol properties dialog allows the user to specify different properties of the symbol to be rendered. In the top left part of the dialog, you nd a preview of the current symbol as it will be displayed in the map canvas. Below the preview is the list of symbol layers. To start the symbol properties dialog, click the button in the Style tab of the Layer Properties dialog. The control panels allow adding or removing layers, changing the position of layers, or locking layers for color changes. In the right part of the dialog, there are shown the settings applicable to the single symbol layer selected in the symbol layer list. The most important is the Symbol Layer Type combo box, which allows you to choose the layer type. The available options depend on the layer type (Point, Line, Polygon). Symbol layer type options for point layers SimpleMarker: Border color, Fill color, Size, Angle, Offset X,Y Properties
49
Figure 4.9.: Example of custom gradient color ramp with multiple stops
SvgMarker: Size, Angle, Offset X,Y, SVG Image Symbol layer type options for line layers LineDecoration: Color MarkerLine: Marker, Marker Interval, Rotate marker, Line offset SimpleLine: Color, Pen width, pen style, Offset, Join style and Cap style Symbol layer type options for polygon layers SimpleFill: Color, Fill style, Border color, Border style, Border width
The old QGIS symbology supports the following renderers: Single symbol - a single style is applied to every object in the layer. Graduated symbol - objects within the layer are displayed with different symbols classied by the values of a particular eld. Continuous color - objects within the layer are displayed with a spread of colours classied by the numerical values within a specied eld. Unique value - objects are classied by the unique values within a specied eld with each value having a different symbol.
50
To change the symbology for a layer, simply double click on its legend entry and the vector Layer Properties dialog will be shown. Style Options Within this dialog you can style your vector layer. Depending on the selected rendering option you have the possibility to also classify your mapfeatures. At least the following styling options apply for nearly all renderers: Fill options Fill style - Style for lling. Beside the given brushes you can select Fill style ? Texture
and click the . . . button for selecting your own texture le. Currently the leformats *.jpeg, *.xpm, and *.png are supported. Fill color - ll-color of your features. Outline options Outline style - pen-style for your outline of your feature. You can also set this to no pen. Outline color - color of the ouline of your feature. Outline width - width of your features. Once you have styled your layer you also could save your layer-style to a separate le (with *.qml-ending). To do this, use the button Save Style . . . . No need to say that Load Style . . . loads your saved layer-style-le. If you wish to always use a particular style whenever the layer is loaded, use the Save As Default button to make your style the default. Also, if you make changes to the style that you are not happy with, use the Restore Default Style button to revert to your default style. Vector transparency QGIS allows to set a transparency for every vector layer. Transparency 10% laying several vector layers. This can be done with the slider inside the Style tab (see g. 4.16a). This is very useful for over-
51
7. Choose the eld to label with. Well use Field containing label
8. Enter a default for lakes that have no name. The default label will be used each time QGIS encounters a lake with no value in the NAMES eld. 9. If you have labels extending over several lines, check Multiline labels? . QGIS will check for a true line return in your label eld and insert the line breaks accordingly. A true line return is a single character \n, (not two separate characters, like a backlash \ followed by the character n). To insert line returns in an attribute eld congure the edit widget to be text edit (not line edit). 10. Click Apply . Now we have labels. How do they look? They are probably too big and poorly placed in relation to the marker symbol for the lakes.
52
Figure 4.12.: Point displacement dialog Select the Font entry and use the Font and Color buttons to set the font and color. You can also change the angle and the placement of the text-label. To change the position of the text relative to the feature: 1. Click on the Font entry. 2. Change the placement by selecting one of the radio buttons in the Placement group. To x our labels, choose the Right radio button. Points or Map units .
4. Click Apply to see your changes without closing the dialog. Things are looking better, but the labels are still too close to the marker. To x this we can use the options on the Position entry. Here we can add offsets for the X and Y directions. Adding an X offset of 5 will move our labels off the marker and make them more readable. Of course if your marker symbol or font is larger, more of an offset will be required. The last adjustment well make is to Buffer the labels. This just means putting a backdrop around them to make them stand out better. To buffer the lakes labels: 1. Click the Buffer Labels? checkbox to enable buffering.
2. Choose a size for the buffer using the spin box. 3. Choose a color by clicking on Color and choosing your favorite from the color selector. You can also set some transparency for the buffer if you prefer. 4. Click Apply to see if you like the changes. If you arent happy with the results, tweak the settings and then test again by clicking Apply . A buffer of 1 points seems to give a good result. Notice you can also specify the buffer size in map units if that works out better for you. The remaining entries inside the Label tab allow you control the appearance of the labels using attributes
53
stored in the layer. The entries beginning with Data dened allow you to set all the parameters for the labels using elds in the layer. Not that the Label tab provides a preview-box where your selected label is shown.
and only requires a few parameters. This new application will replace the current QGIS labeling, described in section 4.4.5 and also supports on-the-y transformated layers. Using new labeling 1. Start QGIS and load a vector point, line or polygon layer. 2. Activate the layer in the legend and click on the Labeling icon in the QGIS toolbar menu.
54
Labeling point layers First step is to activate the Label this layer checkbox and select an attribute column to use for labeling. After that you can dene the label placement and text style, labeling priority, scale-based visibility, if every part of multipart feature is to be labeled and if features act as obstacles for labels or not (see Figure 4.16). Labeling line layers First step is to activate the Label this layer checkbox and select an attribute column to use for labeling. After that you can dene the label placement, orientation, distance to feature, text style, labeling priority, scalebased visibility, if every part of a multipart line is to be labeled, if lines shall be merged to avoid duplicate labels and if features act as obstacles for labels or not (see Figure 4.17). Labeling polygon layers First step is to activate the Label this layer checkbox and select an attribute column to use for labeling. After that you can dene the label placement, distance and text style, labeling priority, scale-based visibility, if every part of multipart feature is to be labeled and if features act as obstacles for labels or not (see Figure 4.18). Change engine settings Additionally you can click the Engine settings button and select the search method, used to nd the best label placement. Available is Chain, Popmusic Tabu, Popmusic Chain, Popmusic Tabu Chain and FALP. Furthermore the number of candidates can be dened for point, line and polygon features, and you can dene
55
whether to show all labels (including colliding labels) and label candidates for debugging. Keywords to use in attribute columns for labeling There is a list of supported key words, that can be used for the placement of labels in dened attribute colums? For horizontal alignment: left, center, right For vertical alignment: bottom, base, half, top Colors can be specied in svg notation, e.g. #ff0000 for bold, underlined, strikeout and italic: 0 = false 1 = true A combination of key words in one column also works, e.g.: base right or bottom left.
56
edit widget Within the Attributes tab you also nd an edit widget column. This column can be used to dene values or a range of values that are allowed to be added to the specic attribute table column. If you click on the edit widget button, a dialog opens, where you can dene different widgets. These widgets are: Line edit: an edit eld which allows to enter simple text (or restrict to numbers for numeric attributes). Classication: Displays a combo box with the values used for classication, if you have chosen unique value as legend type in the Style tab of the properties dialog. Range: Allows to set numeric values from a specic range. The edit widget can be either a slider or a spin box. Unique values: The user can select one of the values already used in the attribute table. If editable is activated, a line edit is shown with autocompletion support, otherwise a combo box is used. File name: Simplies the selection by adding a le chooser dialog. Value map: a combo box with predened items. The value is stored in the attribute, the description is shown in the comboo box. You can dene values manually or load them from a layer or a CSV le. Enumeration: Opens a combo box with values that can be used within the columns type. This is currently only supported by the postgres provider. Immutable: The immutable attribute column is read-only. The user is not able to modify the content. Hidden: A hidden attribute column is invisible. The user is not able to see its content. Checkbox: Displays a checkbox and you can dene what attribute is added to the column when the checkbox is activated or not. Text edit: This opens a text edit eld that allows multiple lines to be used. Calendar: Opens a calendar widget to enter a date. Column type must be text.
57
58
4.4.10. Actions Tab Dening Actions Attribute actions are dened from the vector Layer Properties dialog. To dene an action, open the vector Layer Properties dialog and click on the Actions tab. Provide a descriptive name for the action. The action itself must contain the name of the application that will be executed when the action is invoked. You can add one or more attribute eld values as arguments to the application. When the action is invoked any set of characters that start with a % followed by the name of a eld will be replaced by the value of that eld. The special characters %% will be replaced by the value of the eld that was selected from the identify results or attribute table (see Using Actions below). Double quote marks can be used to group text into a single argument to the program, script or command. Double quotes will be ignored if preceded by a backslash. If you have eld names that are substrings of other eld names (e.g., col1 and col10) you should indicate so, by surrounding the eld name (and the % character) with square brackets (e.g., [%col10]). This will prevent the %col10 eld name being mistaken for the %col1 eld name with a 0 on the end. The brackets will be removed by QGIS when it substitutes in the value of the eld. If you want the substituted eld to be surrounded by square brackets, use a second set like this: [[%col10]]. The Identify Results dialog box includes a (Derived) item that contains information relevant to the layer type. The values in this item can be accessed in a similar way to the other elds by using preceeding the derived eld name by (Derived).. For example, a point layer has an X and Y eld and the value of these can be used in the action with %(Derived).X and %(Derived).Y. The derived attributes are only available from the Identify Results dialog box, not the Attribute Table dialog box. Two example actions are shown below: konqueror http://www.google.com/search?q=%nam konqueror http://www.google.com/search?q=%% In the rst example, the web browser konqueror is invoked and passed a URL to open. The URL performs a Google search on the value of the nam eld from our vector layer. Note that the application or script called by the action must be in the path or you must provided the full path. To be sure, we could rewrite the rst example as: /opt/kde3/bin/konqueror http://www.google.com/search?q=%nam. This will ensure that the konqueror application will be executed when the action is invoked. The second example uses the %% notation which does not rely on a particular eld for its value. When the action is invoked, the %% will be replaced by the value of the selected eld in the identify results or attribute table. Using Actions Actions can be invoked from either the Identify Results dialog or an Attribute Table dialog (recall that these dialogs can be opened by clicking Identify Features or Open Attribute Table ). To invoke
an action, right click on the record and choose the action from the popup menu. Actions are listed in the popup menu by the name you assigned when dening the actions. Click on the action you wish to invoke. If you are invoking an action that uses the %% notation, right-click on the eld value in the Identify Results dialog or the Attribute Table dialog that you wish to pass to the application or script. Here is another example that pulls data out of a vector layer and inserts them into a le using bash and the echo command (so it will only work or perhaps ). The layer in question has elds for a species name taxon_name, latitude lat and longitude long. I would like to be able to make a spatial selection of a localities and export these eld values to a text le for the selected record (shown in yellow in the QGIS map area). Here is the action to achieve this: bash -c "echo \"%taxon_name %lat %long\" >> /tmp/species_localities.txt" After selecting a few localities and running the action on each one, opening the output le will show something like this: Acacia mearnsii -34.0800000000 150.0800000000 Acacia mearnsii -34.9000000000 150.1200000000
59
4.4. The Vector Properties Dialog Acacia mearnsii -35.2200000000 149.9300000000 Acacia mearnsii -32.2700000000 150.4100000000 As an exercise we create an action that does a Google search on the lakes layer. First we need to determine the URL needed to perform a search on a keyword. This is easily done by just going to Google and doing a simple search, then grabbing the URL from the address bar in your browser. From this little effort we see that the format is: http://google.com/search?q=qgis, where QGIS is the search term. Armed with this information, we can proceed: 1. Make sure the lakes layer is loaded. 2. Open the Layer Properties dialog by double-clicking on the layer in the legend or right-click and
choose Properties
3. Click on the Actions tab. 4. Enter a name for the action, for example Google Search. 5. For the action, we need to provide the name of the external program to run. In this case, we can use Firefox. If the program is not in your path, you need to provide the full path. 6. Following the name of the external application, add the URL used for doing a Google search, up to but not included the search term: http://google.com/search?q= 7. The text in the Action eld should now look like this: firefox http://google.com/search?q= 8. Click on the drop-down box containing the eld names for the lakes layer. Its located just to the left of the Insert Field button. 9. From the drop-down box, select Field containing label 10. Your action text now looks like this: firefox http://google.com/search?q=%NAMES 11. Fo nalize the action click the Insert action button. This completes the action and it is ready to use. The nal text of the action should look like this: firefox http://google.com/search?q=%NAMES We can now use the action. Close the Layer Properties dialog and zoom in to an area of interest. Make sure the lakes layer is active and identify a lake. In the result box youll now see that our action is visible: NAMES and click Insert Field .
Figure 4.21.: Select feature and choose action When we click on the action, it brings up Firefox and navigates to the URL http://www.google.com/search? q=Tustumena. It is also possible to add further attribute elds to the action. Therefore you can add a + to the
60
4.4.11. Joins Tab end of the action text, select another eld and click on Insert Field . In this example there is just no other eld available that would make sense to search for. You can dene multiple actions for a layer and each will show up in the Identify Results dialog. You can think of all kinds of uses for actions. For example, if you have a point layer containing locations of images or photos along with a le name, you could create an action to launch a viewer to display the image. You could also use actions to launch web-based reports for an attribute eld or combination of elds, specifying them in the same way we did in our Google search example.
Figure 4.22.: Join an attribute table to an existing vector layer Additionally the add vector join dialog allows to: Cache join layer in virtual memory Create attribute index on the join eld
61
4.5. Editing
Load Vector icon, browse to the QGIS sample dataset folder and load the two
vector shape layers alaska.shp and climate.shp. 2. Double click the climate layer in the map legend to open the Layer Properties dialog. 3. Click on the Diagram Overlay and select Pie chart as Diagram type. 4. In the diagram we want to display the values of the three columns T_F_JAN, T_F_JUL and T_F_MEAN. First select T_F_JAN as Attributes and click the green + button, then T_F_JUL and nally T_F_MEAN. 5. For linear scaling of the diagram size we dene T_F_JUL as classication attribute. 6. Now click on Find maximum value , choose 10 as size value and click Apply to display the diagram in the QGIS main window. 7. You can now adapt the chart size, or change the attribute colors double clicking on the color values in the attribute eld. Figure 4.24 gives an impression. 8. Finally click Ok .
4.5. Editing
QGIS supports various capabilities for editing OGR, PostGIS and Spatialite vector layers. Note - the procedure for editing GRASS layers is different - see Section 9.7 for details. QGIS Tip 15 C ONCURRENT E DITS This version of QGIS does not track if somebody else is editing a feature at the same time as you. The last person to save their edits wins.
62
Mac: go to QGIS Preferences, on Linux: Edit Options .) In the Digitizing tab you can select between to vertex, to segment or to vertex and segment as default snap mode. You can also dene a default snapping tolerance and a search radius for vertex edits. The tolerance an be set either in map units or in pixels. The advantage of choosing pixels, is that the snapping tolerance doesnt have to be changed after zoom operations. In our small digitizing project (working with the Alaska dataset), we dene the snapping units in feet. Your results may vary, but something on the order of 300ft should be ne at a scale of 1:10 000 should be a reasonable setting. 2. A layer based snapping tolerance can be dened by choosing Snapping options. . . ure 4.25). Settings (or File )
to enable and adjust snapping mode and tolerance on a layer basis (see Fig-
Note that this layer based snapping overrides the global snapping option set in the Digitizing tab. So if you need to edit one layer, and snap its vertices to another layer, then enable snapping only on the snap to layer, then decrease the global snapping tolerance to a smaller value. Furthermore, snapping will never occur to a layer which is not checked in the snapping options dialog, regardless of the global snapping tolerance. So be sure to mark the checkbox for those layers that you need to snap to.
63
4.5. Editing
Search radius Search radius is the distance QGIS uses to search for the closest vertex you are trying to move when you click on the map. If you arent within the search radius, QGIS wont nd and select any vertex for editing and it will pop up an annoying warning to that effect. Snap tolerance and search radius are set in map units or pixels, so you may nd you need to experiment to get them set right. If you specify too big of a tolerance, QGIS may snap to the wrong vertex, especially if you are dealing with a large number of vertices in close proximity. Set search radius too small and it wont nd anything to move. The search radius for vertex edits in layer units can be dened in the Digitizing tab under Settings
Options . The same place where you dene the general, project wide snapping tolerance.
navigating can also be done with the mouse wheel, spacebar and the arrow keys. Zooming and panning with the mouse wheel While digitizing you can press the mouse wheel to pan inside of the main window and you can roll the mouse wheel to zoom in and out on the map. For zooming place the mouse cursor inside the map area and roll it forward (away from you) to zoom in and backwards (towards you) to zoom out. The mouse cursor position will be the center of the zoomed area of interest. You can customize the behavior of the mouse wheel zoom using Options I menu. the Map tools tab under the Settings Panning with the arrow keys Panning the Map during digitizing is possible with the arrow keys. Place the mouse cursor inside the map area and click on the right arrow key to pan east, left arrow key to pan west, up arrow key to pan north and down arrow key to pan south. You can also use the spacebar to temporarily cause mouse movements to pan then map. The PgUp and PgDown keys on your keyboard will cause the map display to zoom in or out without interrupting your digitising session.
Topological editing Besides layer based snapping options you can also dene some topological functionalities in the Snapping options . . . dialog in the Settings (or File ) menu. Here you can dene Enable topological editing and/or for polygon layers you can activate the column avoids intersection of new polygons. Avoid Int. which
64
4.5.3. Digitizing an existing layer Enable topological editing The option Enable topological editing is for editing and maintaining common boundaries in polygon mosaics. QGIS detects a shared boundary in a polygon mosaic and you only have to move the vertex once and QGIS will take care about updating the other boundary. Avoid intersections of new polygons The second topological option in the Avoid Int. column, called Avoid intersections of new polygons avoids overlaps in polygon mosaics. It is for quicker digitizing of adjacent polygons. If you already have one polygon, it is possible with this option to digitise the second one such that both intersect and QGIS then cuts the second polygon to the common boundary. The advantage is that users dont have to digitize all vertices of the common boundary.
All editing sessions start by choosing the Toggle editing after right clicking on the legend entry for that layer. Alternately, you can use the
Toggle editing button from the digitizing toolbar to start or stop the editing
mode. Once the layer is in edit mode, markers will appear at the vertices, and additional tool buttons on the editing toolbar will become available. QGIS Tip 16 S AVE R EGULARLY Remember to changes. Save Edits regularly. This will also check that your data source can accept all the
Adding Features You can use the Capture point , Capture line or Capture polygon icons on the toolbar
65
4.5. Editing For each feature, you rst digitize the geometry, then enter its attributes. To digitize the geometry, left-click on the map area to create the rst point of your new feature. For lines and polygons, keep on left-clicking for each additional point you wish to capture. When you have nished adding points, right-click anywhere on the map area to conrm you have nished entering the geometry of that feature. The attribute window will appear, allowing you to enter the information for the new feature. Figure 4.26 shows setting attributes for a ctitious new river in Alaska. In the Digitising tab under the Settings Options
menu, you can also activate Reuse last entered attribute values .
Figure 4.26.: Enter Attribute Values Dialog after digitizing a new vector feature With the Move Feature icon on the toolbar you can move existing features.
QGIS Tip 17 ATTRIBUTE VALUE T YPES At least for shapele editing the attribute types are validated during the entry. Because of this, it is not possible to enter a number into the text-column in the dialog Enter Attribute Values or vica versa. If you need to do so, you should edit the attributes in a second step within the Attribute table dialog.
Node Tool For both PostgreSQL/PostGIS and shapele-based layers, the Node Tool provides manipulation capabilites of feature vertices similar to CAD programs. It is possible to simply select multiple vertices at once and to move, add or delete them alltogether. The node tool also works with on the y projection turned on and supports the topological editing feature. This tool is, unlike other tools in Quantum GIS, persistent, so when some operation is done, selection stays active for this feature and tool. If the node tool couldnt nd any features, a warning will be displayed. Important is to set the property Settings Options Digitizing Search Radius 10 to a
number greater than zero. Otherwise QGIS will not be able to tell which vertex is being edited. QGIS Tip 18 V ERTEX M ARKERS The current version of QGIS supports three kinds of vertex-markers - Semi transparent circle, Cross and None. To change the marker style, choose Options from the Settings menu and click on the Digitizing tab and select the appropriate entry.
66
4.5.3. Digitizing an existing layer Basic operations Start by activating the Node Tool and selecting a feature by clicking on it. Red boxes will appear at
each vertex of this feature. Note that to select a polygon you must click one of its vertices or edges; clicking inside it will produce an error message. Once a feature is selected the following functionalities are available: Selecting vertices: You can select vertices by clicking on them one at a time, by clicking on an edge to select the vertices at both ends, or by clicking and dragging a rectangle around some vertices. When a vertex is selected its color changes to blue. To add more vertices to the current selection, hold down the Ctrl key while clicking. Hold down Ctrl Shift when clicking to toggle the selection state of vertices (vertices that are currently unselected will be selected as usual, but also vertices that are already selected will become unselected). Adding vertices: To add a vertex simply double click near an edge and a new vertex will appear on the edge near to the cursor. Note that the vertex will appear on the edge, not at the cursor position, therefore it has to be moved if necessary. Deleting vertices: After selecting vertices for deletion, click the not use the Node Tool Delete key. Note that you can-
number of vertices for the feature type you are working on. To delete a complete feature use the Delete Selected tool. Moving vertices: Select all the vertices you want to move. Click on a selected vertex or edge and drag in the direction you wish to move. All the selected vertices will move together. If snapping is enabled, the whole selection can jump to the nearest vertex or line. Each change made with the node tool is stored as a separate entry in the undo dialog. Remember that all operations support topological editing when this is turned on. On the y projection is also supported, and the node tool provides tooltips to identify a vertex by hovering the pointer over it. Cutting, Copying and Pasting Features Selected features can be cut, copied and pasted between layers in the same QGIS project, as long as destination layers are set to Toggle editing beforehand.
Features can also be pasted to external applications as text: That is, the features are represented in CSV format with the geometry data appearing in the OGC Well-Known Text (WKT) format. However in this version of QGIS, text features from outside QGIS cannot be pasted to a layer within QGIS. When would the copy and paste function come in handy? Well, it turns out that you can edit more than one layer at a time and copy/paste features between layers. Why would we want to do this? Say we need to do some work on a new layer but only need one or two lakes, not the 5,000 on our big_lakes layer. We can create a new layer and use copy/paste to plop the needed lakes into it. As an example we are copying some lakes to a new layer: 1. Load the layer you want to copy from (source layer) 2. Load or create the layer you want to copy to (target layer) 3. Start editing for target layer 4. Make the source layer active by clicking on it in the legend 5. Use the 6. Click on the Select tool to select the feature(s) on the source layer Copy Features tool
7. Make the destination layer active by clicking on it in the legend 8. Click on the Paste Features tool
9. Stop editing and save the changes What happens if the source and target layers have different schemas (eld names and types are not the same)? QGIS populates what matches and ignores the rest. If you dont care about the attributes being
67
4.5. Editing copied to the target layer, it doesnt matter how you design the elds and data types. If you want to make sure everything - feature and its attributes - gets copied, make sure the schemas match. QGIS Tip 19 C ONGRUENCY OF PASTED F EATURES If your source and destination layers use the same projection, then the pasted features will have geometry identical to the source layer. However if the destination layer is a different projection then QGIS cannot guarantee the geometry is identical. This is simply because there are small rounding-off errors involved when converting between projections.
Deleting Selected Features If we want to delete an entire polygon, we can do that by rst selecting the polygon using the regular Select Features set, use the The use the tool. You can select multiple features for deletion. Once you have the selection
Delete Selected tool to delete the features. Cut Features tool on the digitizing toolbar can also be used to delete features. This effectively
deletes the feature but also places it on a spatial clipboard". So we cut the feature to delete. We could then paste tool to put it back, giving us a one-level undo capability. Cut, copy, and paste work on the currently selected features, meaning we can operate on more than one at a time. QGIS Tip 20 F EATURE D ELETION S UPPORT When editing ESRI shapeles, the deletion of features only works if QGIS is linked to a GDAL version 1.3.2 or greater. The OS X and Windows versions of QGIS available from the download site are built using GDAL 1.3.2 or higher.
Saving Edited Layers When a layer is in editing mode, any changes remain in the memory of QGIS. Therefore they are not committed/saved immediately to the data source or disk. If you want to save edits to the current layer but want to continue editing without leaving the editing mode, you can click the editing mode off with the Save Edits button. When you turn
Toggle editing (or quit QGIS for that matter), you are also asked if you want
to save your changes or discard them. If the changes cannot be saved (e.g. disk full, or the attributes have values that are out of range), the QGIS in-memory state is preserved. This allows you to adjust your edits and try again. QGIS Tip 21 DATA I NTEGRITY It is always a good idea to back up your data source before you start editing. While the authors of QGIS have made every effort to preserve the integrity of your data, we offer no warranty in this regard.
68
To use the undo/redo history widget simply click to select an operation in the history list; all features will be reverted to the state they were in after the selected operation.
Simplify Feature The Simplify Feature tool allows to reduce the number of vertices of a feature, as long as the geometry
doesnt change. You need to select a feature, it will be highlighted by a red rubber band and a slider appears. Moving the slider, the red rubber band is changing its shape to show how the feature is being simplied. Clicking OK the new, simplied geometry will be stored. If a feature cannot be simplied (e.g. MultiPolygons), a message shows up. Add Ring You can create ring polygons using the Add Ring icon in the toolbar. This means inside an existing
area it is possible to digitize further polygons, that will occur as a hole, so only the area in between the boundaries of the outer and inner polygons remain as a ring polygon.
69
4.5. Editing Add Part You can add part polygons to a selected multipolygon. The new part polygon has to be digitized outside the selected multipolygon. Delete Ring The Delete Ring tool allows to delete ring polygons inside an existing area. This tool only works with
polygon layers. It doesnt change anything when it is used on the outer ring of the polygon. This tool can be used on polygon and mutli-polygon features. Before you select the vertices of a ring, adjust the vertex edit tolerance. Delete Part The Delete Part tool allows to delete parts from multifeatures (e.g. to delete polygons from a multipolygon feature). It wont delete the last part of the feature, this last part will stay untouched. This tool works with all multi-part geometries point, line and polygon. Before you select the vertices of a part, adjust the vertex edit tolerance. Reshape Features You can reshape line and polygon features using the Reshape Features icon on the toolbar. It re-
places the line or polygon part from the rst to the last intersection with the original line. With polygons this can sometimes lead to unintended results. It is mainly useful to replace smaller parts of a polygon, not major overhauls and the reshapeline is not allowed to cross several polygon rings as this would generate an invalid polygon. For example, you can edit the boundary of a polygon with this tool. First, click in the inner area of the polygon next to the point where you want to add a new vertex. Then, cross the boundary and add the vertices outside the polygon. To nish, right-click in the inner area of the polygon. The tool will automatically add a node where the new line crosses the border. It is also possible to remove part of the area from the polygon, starting the new line outside the polygon, adding vertices inside, and ending the line outside the polygon with a right click. Note: The reshape tool may alter the starting position of a polygon ring or a closed line. So the point that is represented twice will not be the same any more. This may not be a problem for most applications, but it is something to consider. Split Features You can split features using the you want to split. Merge selected features The Merge Selected Features tool allows to merge features that have common boundaries and the Split Features icon on the toolbar. Just draw a line across the feature
same attributes. Merge attributes of selected features The Merge Attributes of Selected Features tool allows to merge attributes of features with common
boundaries and attributes without merging their boundaries. Rotate Point Symbols The Rotate Point Symbols tool is currently only supported by the old symbology engine. It allows
to change the rotation of point symbols in the map canvas, if you have dened a rotation column from the attribute table of the point layer in the Style tab of the Layer Properties . Otherwise the tool is inactive. To change the rotation, select a point feature in the map canvas and rotate it holding the left mouse button pressed. A red arrow with the rotation value will be visualized (see Figure 4.28). When you release the left
70
Figure 4.28.: Rotate Point Symbols mouse button again, the value will be updated in the attribute table. Note: If you hold the Ctrl key pressed, the rotation will be done in 15 degree steps.
menu. The New Vector Layer dialog will be displayed as shown in Figure 4.29. Choose the type of layer (point, line or polygon) and the CRS (Coordinate Reference System).
Figure 4.29.: Creating a new Shapele layer Dialog Note that QGIS does not yet support creation of 2.5D features (i.e. features with X,Y,Z coordinates) or measure features. At this time, only shapeles can be created. In a future version of QGIS, creation of any OGR or
71
4.5. Editing PostgreSQL layer type will be supported. To complete the creation of the new Shapele layer, add the desired attributes by clicking on the Add button and specifying a name and type for the attribute. A rst id column is added as default but can be removed, if not wanted. Only Type real , Type integer , and Type string attributes are
supported. Additionally and according to the attribute type you can also dene the width and precision of the new attribute column. Once you are happy with the attributes, click OK and provide a name for the shapele. QGIS will automatically add a .shp extension to the name you specify. Once the layer has been created, it will be added to the map and you can edit it in the same way as described in Section 4.5.3 above. Creating a new SpatiaLite layer To create a new SpatiaLite layer for editing, choose new New SpatiaLite Layer from the Layer
menu. The New SpatiaLite Layer dialog will be displayed as shown in Figure 4.30.
First step is to select an existing Spatialite database or to create a new Spatialite database. This can be done with the browse ... button to the right of the database eld. Then add a name for the new layer and dene the layer type and the EPSG SRID. If desired you can select to create an autoincrementing primary key . To dene an attribute table for the new Spatialite layer, add the names of the attribute columns you want to create with the according column type and click on the Add to attribute list button. Once you are happy with the attributes, click OK . QGIS will automatically add the new layer to the legend and you can edit it in the same way as described in Section 4.5.3 above. The spatialite creation dialog allows to create multiple layers without closing the dialog when you click Apply .
72
This will open a new window which displays the feature attributes in the layer (gure 4.31). The number of features and the number of selected features are shown in the attribute table title.
Selecting features in an attribute table Each selected row in the attribute table displays the attributes of a selected feature in the layer. If the set of features selected in the main window is changed, the selection is also updated in the attribute table. Likewise, if the set of rows selected in the attribute table is changed, the set of features selected in the main window will be updated. Rows can be selected by clicking on the row number on the left side of the row. Multiple rows can be marked by holding the Ctrl key. A continuous selection can be made by holding the Shift key and clicking on several row headers on the left side of the rows. All rows between the current cursor position and the clicked row are selected. Moving the cursor position in the attribute table, by clicking a cell in the table, does not change the row selection. Changing the selection in the main canvas does not move the cursor position in the attribute table. The table can be sorted by any column, by clicking on the column header. A small arrow indicates the sort order (downward pointing means descending values from the top row down, upward pointing means ascending values from the top row down). For a simple search by attributes on only one column the Look for eld can be used. Select the eld (column) from which the search should be performed from the dropdown menu and hit the Search button. The matching rows will be selected and the total number of matching rows will appear in the title bar of the attribute table, and in the status bar of the main window. For more complex searches use the Advanced search ... , which will launch the Search Query Builder described in Section 4.6.
73
4.6. Query Builder To show selected records only, use the checkbox Show selected only . To search selected records only,
use the checkbox Search selected only . The Case sensitive checkbox allows to select case sensitive. The other buttons at the bottom left of the attribute table window provide following functionality: Unselect all also with Ctrl-U Move selected to top also with Ctrl-T Invert selection also with Ctrl-S Copy selected rows to clipboard also with Ctrl-C Zoom map to the selected rows also with Ctrl-J Toggle editing mode to edit single values of attribute table and to enable functionalities de-
scribed below also with Ctrl-E Delete selected features also with Ctrl-D New Column Ctrl-W Delete Column only for PostGIS layers yet also with Ctrl-L Open eld calculator also with Ctrl-I for PostGIS layers and for OGR layers with GDAL version >= 1.6 also with
Save selected features as new layer The selected features can be saved as any OGR supported vector format and also transformed into another Coordinate Reference System (CRS). Just open the right mouse menu of the layer and click on Save selection as I to dene the name of the output le, its format and CRS (see Section 3.2.3). It is also possible to specify OGR creation options within the dialog. QGIS Tip 22 M ANIPULATING ATTRIBUTE DATA Currently only PostGIS layers are supported for adding or dropping attribute columns within this dialog. In future versions of QGIS, other datasources will be supported, because this feature was implemented in GDAL/OGR > 1.6.0 Working with non spatial attribute tables QGIS allows also to load non spatial tables. This includes currently tables supported by OGR, delimited text and the PostgreSQL provider. The tables can be used for eld lookups or just generally browsed and edited using the table view. When you load the table you will see it in the legend eld. It can be opened e.g. with the Open Attribute Table tool and is then editable like any other layer attribute table. As an example you can use columns of the non spatial table to dene attribute values or a range of values that are allowed to be added to a specic vector layer during digitizing. Have a closer look at the edit widget in section 4.4.7 to nd out more.
74
100000 in the SQL box of the query builder. Figure 4.32 shows an example of the query builder populated with data from a PostGIS layer with attributes stored in PostgreSQL. The Fields, Values and Operators sections help the user to construct the SQL-like
The Fields list contains all attributes of the attribute table to be searched. To add an attribute to the SQL where clause eld, double click its name in the Fields list. Generally you can use the various elds, values and operators to construct the query or you can just type it into the SQL box. The Values list lists the values of an attribute. To list all possible values of an attribute, select the attribute in the Fields list and click the All button. To list all values of an attribute that are present in the sample table, select the attribute in the Fields list and click the Sample button. To add a value to the SQL where clause eld, double click its name in the Values list. The Operators section contains all usable operators. To add an operator to the SQL where clause eld, click the appropriate button. Relational operators ( = , > , . . . ), string comparison operator ( LIKE ), logical operators ( AND , OR , . . . ) are available. The Test button shows a message box with the number of features satisfying the current query, which is usable in the process of query construction. The Clear button clears the text in the SQL where clause text eld. The Save and Load button allow to save and load SQL queries. The OK button closes the window and selects the features satisfying the query. The Cancel current selection. button closes the window without changing the
QGIS Tip 23 C HANGING THE L AYER D EFINITION You can change the layer denition after it is loaded by altering the SQL query used to dene the layer. To do this, open the vector Layer Properties dialog by double-clicking on the layer in the legend and click on the Query Builder button on the General tab. See Section 4.4 for more information.
75
4.7. Field Calculator Select by query With QGIS it is possible also to select features using a similar query builder interface to that used in 4.6. In the above section the purpose of the query builder is to only show features meeting the lter criteria as a virtual layer / subset. The purpose of the select by query function is to highlight all features that meet a particular criteria. Select by query can be used with all vector data providers. To do a select by query on a loaded layer, click on the button Open Table to open the attribute table
of the layer. Then click the Advanced... button at the bottom. This starts the Query Builder that allows to dene a subset of a table and display it as described in Section 4.6. Save selected features as new layer The selected features can be saved as any OGR supported vector format and also transformed into another Coordinate Reference System (CRS). Just open the right mouse menu of the layer and click on Save selection as I to dene the name of the output le, its format and CRS (see Section 3.2.3). It is also possible to specify OGR creation options within the dialog.
attribute values or dened functions, e.g to calculate length or area of geometry features. The results can be written to a new attribute column or it can be used to update values in an already existing column. The creation of new attribute elds is currently only possible in PostGIS and with OGR formats, if GDAL version is >= 1.6.0. You have to bring the vector layer in editing mode, before you can click on the eld calculator icon to open the dialog (see Figure 4.33). In the dialog you rst have to select whether you want to update an existing eld, only update selected features or create a new attribute eld, where the results of the calculation will be added.
Figure 4.33.: Field Calculator If you choose to add a new eld, you need to enter a eld name, a eld type (integer, real or string), the total
76
eld width, and the eld precision. For example, if you choose a eld width of 10 and a eld precision of 3 it means you have 6 signs before the dot, then the dot and another 3 signs for the precision. The Fields list contains all attributes of the attribute table to be searched. To add an attribute to the Field calculator expression eld, double click its name in the Fields list. Generally you can use the various elds, values and operators to construct the calculation expression or you can just type it into the box. The Values list lists the values of an attribute eld. To list all possible values, select the attribute eld in the Fields list and click the All button. To list all values of an attribute eld that are present in the sample table, select the attribute in the Fields list and click the Sample button. The procedure is the same as for the Query Builder. To add a value to the Field calculator expression box, double click its name in the Values list. The Operators section contains all usable operators. To add an operator to the Field calculator expression box, click the appropriate button. Mathematical calculations ( + , - , * . . . ), trigonometric functions ( sin, cos, tan, . . . ), extract geometric information ( length and area ) are available, together with concatenator (||) and row counter. Stay tuned for more operators to come! A short example illustrates how the eld calculator works. We want to calculate the length of the railroads layer from the QGIS _example_dataset: 1. Load the Shapele railroads.shp in QGIS and open the Attribute Table dialog. 2. Click on 3. Unselect the Toggle editing mode and open the Field Calculator dialog.
4. Add length as output eld name, real as output eld type and dene output eld width 10 and a precision of 3. 5. Now click on Operator length to add it as $length into the eld calculator expression box and click Ok . Due to limited space screeen, not all the operators are available through the buttons. They are all listed in the following table.
List of operators supported by the eld calculator String NULL sqrt(a) sin(a) cos(a) tan(a) asin(a) acos(a) atan(a) to int(a) to real(a) to string(a) lower(a) See next page Literal string value null value square root sinus of a cosinus of b tangens of a arcussinus of a arcuscosinus of a arcustangens of a convert string a to integer convert string a to real convert number a to string convert string a to lower case
77
Literal string value convert string a to upper case length of string a arcustangens of y/x using the signs of the two arguments to determine the quadrant of the result. replace replacethis with withthat in string a
replace(a, replacethis, withthat) substr(a,from,len) a || b $rownum $area $perimeter $length $id $x $y a^b a*b a/b a+b a-b +a -a
len characters of string a starting from from (rst character index is 1) concatenate strings a and b number current row area of polygon perimeter of polygon area of line feature id x coordinate of point y coordinate of point a raised to the power of b a multiplied by b a divided by b a plus b a minus b positive sign negative value of a
78
More than one layer can be loaded at the same key and clicking on multiple items in the dialog
Open a GDAL Supported Raster Data Source . Once a raster layer is loaded in the map legend you can click on the layer name with the right mouse button to select and activate layer specic features or to open a dialog to set raster properties for the layer. Right mouse button menu for raster layers Zoom to layer extent
I I I I
Zoom to best scale (100%) Show in overview Remove Set layer CRS
1 GRASS
79
5.3. Raster Properties Dialog Set project CRS from layer Properties Rename Add Group Expand all Collapse all
I I I I I
80
QGIS can restrict the data displayed to only show cells whose values are within a given number of standard deviations of the mean for the layer. This is useful when you have one or two cells with abnormally high values in a raster grid that are having a negative impact on the rendering of the raster. This option is only available for pseudocolor and freak out images. Three band color This selection offers you a wide range of options to modify the appearance of your rasterlayer. For example you could switch color-bands from the standard RGB-order to something else. Also scaling of colors are available. QGIS Tip 24 V IEWING A S INGLE B AND OF A M ULTIBAND R ASTER If you want to view a single band (for example Red) of a multiband image, you might think you would set the Green and Blue bands to Not Set. But this is not the correct way. To display the Red band, set the image type to grayscale, then select Red as the band to use for Gray.
81
with the
An even more exible way to customize the transparency can be done in the Custom transparency options section. The transparency of every pixel can be set in this tab. As an example we want to set the water of our example rasterle landcover.tif to a transparency of 20%. The following steps are neccessary: 1. Load the rasterle landcover 2. Open the properties dialog by double-clicking on the rasterle-name in the legend or by right-clicking and choosing Properties 3. select the Transparency tab 4. Click the Add values manually button. A new row will appear in the pixel-list.
5. enter the raster-value (we use 0 here) and adjust the transparency to 20% 6. press the Apply button and have a look at the map You can repeat the steps 4 and 5 to adjust more values with custom transparency. As you can see this is quite easy to set custom transparency, but it can be quite a lot of work. Therefore you can use the button Export to le to save your transparency-list to a le. The button Import from le loads your transparency-settings and applies them to the current rasterlayer.
5.3.3. Colormap
The Colormap tab is only available, when you have selected a single-band-rendering within the Style tab (see chapt. 5.3.1). Three ways of color interpolation are available: Discrete Linear Exact The button Add Entry adds a color to the individual color-table. Delete Entry deletes a color from the individual color-table and the Sort sorts the color table according to the pixel values in the value column. Double-Clicking on the value-column lets you inserting a specic value. Double clicking on the color-column opens the dialog Select color where you can select a color to apply on that value. Further you can also add labels for each color but this value wont be displayed when you use the identify feature tool. Alternatively you can click on the button the band (if it has any). The block Generate new color map allows you to create newly categorized colormaps. need to select the number of classes 15 Classication mode Equal Interval and press the button Classify . is supported. You only Currently only one Load colormap from Band , which tries to load the table from
82
5.3.5. Metadata Tab Also the coordinate reference system (CRS) is printed here as a PROJ.4-string. This can be modied by hitting the Specify button.
Please note that building pyramids may alter the original data le and once created they cannot be removed. If you wish to preserve a non-pyramided version of your raster, make a backup copy prior to building pyramids.
automaticaly when you open Histogram the list box at the bottom left of the tab.
QGIS Tip 25 G ATHERING R ASTER S TATISTICS To gather statistics for a layer, select pseudocolor rendering and click the Apply button. Gathering statistics for a layer can be time consuming. Please be patient while QGIS examines your data!
83
With the Result to project checkbox the result layer will automatically added to the legend area and can be visualized.
84
85
6.2. WMS Client The dialog Add Layer(s) from a Server for adding layers from the WMS server pops up. Fortunately you can add some servers to play with by clicking the Add default servers button. This will add at least three WMS servers for you to use, including the NASA (JPL) WMS server. To dene a new WMS server in the Layers , select New . Then enter the parameters to connect to your desired WMS server, as listed in table 6.1: Name A name for this connection. This name will be used in the Server Connections drop-down box so that you can distinguish it from other WMS Servers. URL of the server providing the data. This must be a resolvable host name; the same format as you would use to open a telnet connection or ping a host. Username to access a secured WMS-server. This parameter is optional Password for a basic authenticated WMS-server. This parameter is optional. Ignore GetMap URI reported in capabilities , use given URI from URL-eld above Ignore GetFeatureInfo URI reported in capabilities , use given URI from URL-eld above Table 6.1.: WMS Connection Parameters If you need to set up a proxy-server to be able to receive WMS-services from the internet, you can add your proxy-server in the options. Choose menu Settings Options and click on the Network & Proxy tab. There you can add your proxy-settings and enable them by setting the Make sure that you select the correct proxy-type from the Proxy type Use proxy for web access . dropdown menu.
URL
Once the new WMS Server connection has been created, it will be preserved for future QGIS sessions. QGIS Tip 26 O N WMS S ERVER URL S Be sure, when entering in the WMS server URL, that you have the base URL. For example, you shouldnt have fragments such as request=GetCapabilities or version=1.0.0 in your URL.
86
Figure 6.1.: Dialog for adding a WMS server, showing its available layers QGIS Tip 27 I MAGE E NCODING You will typically nd that a WMS server offers you the choice of JPEG or PNG image encoding. JPEG is a lossy compression format, whereas PNG faithfully reproduces the raw raster data. Use JPEG if you expect the WMS data to be photographic in nature and/or you dont mind some loss in picture quality. This trade-off typically reduces by 5 times the data transfer requirement compared to PNG. Use PNG if you want precise representations of the original data, and you dont mind the increased data transfer requirements.
WMS server. Layer Order The Layer Order tab lists the selected layers available from the current connected WMS server. You may notice that some layers are expandible, this means that the layer can be displayed in a choice of image styles. You can select several layers at once, but only one image style per layer. When several layers are selected, they will be combined at the WMS Server and transmitted to QGIS in one go. QGIS Tip 28 WMS L AYER O RDERING In this version of QGIS, WMS layers rendered by a server are overlaid in the order listed in the Layers section, from top to bottom of the list. If you want to change the overlay order, you can use the Layer Order tab.
Transparency In this version of QGIS, the transparency setting is hard-coded to be always on, where available. Coordinate Reference System A Coordinate Reference System (CRS) is the OGC terminology for a QGIS Projection. Each WMS Layer can be presented in multiple CRSs, depending on the capability of the WMS server. You may notice that the x changes in the Coordinate Reference System (x available) header as you select and deselect layers from the Layers section. To choose a CRS, select Change. . . and a dialog similar to Figure 8.2 in Section 8.3 will appear. The main
87
6.2. WMS Client QGIS Tip 29 WMS L AYER T RANSPARENCY The availability of WMS image transparency depends on the image encoding used: PNG and GIF support transparency, whilst JPEG leaves it unsupported.
difference with the WMS version of the screen is that only those CRSs supported by the WMS Server will be shown. QGIS Tip 30 WMS P ROJECTIONS For best results, make the WMS layer the rst layer you add to your project. This allows the project projection to inherit the CRS you used to render the WMS layer. On-the-y projection (see Section 8.2) can then be used to t any subsequent vector layers to the project projection. In this version of QGIS, if you add a WMS layer later, and give it a different CRS to the current project projection, unpredictable results can occur.
6.2.4. Server-Search
Within QGIS you can search for WMS-servers. Figure 6.2 shows the newly created search -tab with the Add Layer(s) from a Server -dialog.
Figure 6.2.: Dialog for searching WMS servers after some keywords As you can see it is possible to enter a search-string in the texteld an hit the Search button. After a short while the search result will be populated into the tab below the texteld. Browse the result list and inspect your searchresults within the table. To visualize the results, select an table entry, press the Add selected row to WMS-list button and change back to the server tab. QGIS automatically has updated your server list and the selected searchresult is already enabled in the list of saved WMS-servers. You only need to request the list of layers by clicking the Connect button. This option is quite handy when you want to search maps by specic keywords. Basically this option is a frontend to the API of http://geopole.org.
88
6.2.6. Tilesets
When using WMS-C (Cached WMS) Services like http://labs.metacarta.com/wms-c/Basic.py you are able to browse through the tiles -tab given by the server. Additional information like tilesize, formats and supported CRS are listed in this table. In combination with this feature you can use the tile scale slider from the View , which gives you the available scales from the tileserver with nice slider docked in. tile scale slider
Viewing Properties Once you have added a WMS server, you can view its properties by right-clicking on it in the legend, and selecting Properties . Metadata Tab The Metadata tab displays a wealth of information about the WMS server, generally collected from the Capabilities statement returned from that server. Many denitions can be gleaned by reading the WMS standards [6], [7], but here are a few handy denitions: Server Properties WMS Version - The WMS version supported by the server. Image Formats - The list of MIME-types the server can respond with when drawing the map. QGIS supports whatever formats the underlying Qt libraries were built with, which is typically at least image/png and image/jpeg. Identity Formats - The list of MIME-types the server can respond with when you use the Identify tool. Currently QGIS supports the text-plain type. Layer Properties Selected - Whether or not this layer was selected when its server was added to this project. Visible - Whether or not this layer is selected as visible in the legend. (Not yet used in this version of QGIS.) Can Identify - Whether or not this layer will return any results when the Identify tool is used on it. Can be Transparent - Whether or not this layer can be rendered with transparency. This version of QGIS will always use transparency if this is Yes and the image encoding supports transparency . Can Zoom In - Whether or not this layer can be zoomed in by the server. This version of QGIS assumes all WMS layers have this set to Yes. Decient layers may be rendered strangely.
89
6.3. WFS and WFS-T Client Cascade Count - WMS servers can act as a proxy to other WMS servers to get the raster data for a layer. This entry shows how many times the request for this layer is forwarded to peer WMS servers for a result. Fixed Width, Fixed Height - Whether or not this layer has xed source pixel dimensions. This version of QGIS assumes all WMS layers have this set to nothing. Decient layers may be rendered strangely. WGS 84 Bounding Box - The bounding box of the layer, in WGS 84 coordinates. Some WMS servers do not set this correctly (e.g. UTM coordinates are used instead). If this is the case, then the initial view of this layer may be rendered with a very zoomed-out appearance by QGIS. The WMS webmaster should be informed of this error, which they may know as the WMS XML elements LatLonBoundingBox, EX_GeographicBoundingBox or the CRS:84 BoundingBox. Available in CRS - The projections that this layer can be rendered in by the WMS server. These are listed in the WMS-native format. Available in style - The image styles that this layer can be rendered in by the WMS server.
A workaround is to delete the layer completely and start again. WMS Servers Requiring Authentication Currently public accessible and secured WMS-services are supported. The secured WMS-servers can be accessed by public authentication. You can add the (optional) credentials when you add a WMS-server. See section 6.2.2 for details. QGIS Tip 31 ACCESSING SECURED OGC- LAYERS If you need to access secured layers with other secured methods than basic authentication, you could use InteProxy as a transparent proxy, which does supports several authentication methods. More information can be found at the InteProxy-manual found on the website http://inteproxy.wald.intevation.org.
QGIS Tip 32 QGIS WMS M APSERVER Note that with the Version 1.7.0 QGIS brings its own implementation of a WMS 1.3.0 Mapserver. Read more about this at chapter ??.
adding a WFS layer is very similar to the procedure used with WMS. The difference is there are no default servers dened, so we have to add our own.
90
Loading a WFS Layer As an example we use the DM Solutions WFS server and display a layer. The URL is: http://www2.dmsolutions.ca/cgi-bin/mswfs_gmap 1. Make sure the WFS plugin is loaded; if not, open the Plugin Manager and load it 2. Click on the 3. Click on New 4. Enter Name DM Solutions as the name Add WFS Layer tool on the plugins toolbar
5. Enter the URL (see previous page) 6. Click OK 7. Choose Server Connections 8. Click Connect 9. Wait for the list of layers to be populated 10. Click on the Parks layer 11. Click Ok to add the layer to the map 12. Wait patiently for the features to appear Note that the WFS-plugin also recognizes the proxy-settings you have set in your preferences. DM Solutions from the drop-down box
Figure 6.3.: Adding a WFS layer Without using the checkbox Only request features overlapping the current view extent QGIS fetches all features from the WFS-server. If you only want to have a small selection based on your extent, zoom to the area of interest, request the WFS-layer again and make sure you have checked the checkbox mentioned above. Basically this addes the BBOX-parameter with the values from you current extent to the WFS-query. This is extremly usefull when you only want to request some features from a huge WFS-dataset. Youll notice the download progress is visualized in the left bottom of the QGIS main window. Once the layer is loaded, you can identify and select a province or two and view the attribute table. Remember this plugin works best with MapServer WFS servers. It still could be, that you might experience random behavior and crashes. You can look forward to improvements in a future version of the plugin. This means that only WFS 1.0.0 is supported. At this point there have not been many test against WFS versions implemented in other WFS-servers. If you encounter problems with any other WFS-server, please do not hesitate to contacting the development team. Please refer to Section 13 for further information about the mailinglists.
91
QGIS Tip 33 F INDING WFS S ERVERS You can nd additional WFS servers by using Google or your favorite search engine. There are a number of lists with public URLs, some of them maintained and some not.
92
7. QGIS Server
QGIS Server is an open source WMS 1.3 implementation which, in addition, implements advanced cartographic features for thematic mapping. The QGIS Server is a FastCGI/CGI (Common Gateway Interface) application written in C++ that works together with a webserver (e.g. Apache, Lighttpd). It is funded by the EU projects Orchestra, Sany and the city of Uster in Switzerland. It uses QGIS as backend for the GIS logic and for map rendering. Furthermore the Qt library is used for graphics and for platform independent C++ programming. In contrast to other WMS software, the QGIS Server uses cartographic rules in SLD/SE as a conguration language, both for the server conguration and for the user-dened cartographic rules. Moreover, the QGIS Server project provides the Publish to Web plugin, a plugin for QGIS desktop which exports the current layers and symbology as a web project for QGIS Server (containing cartographic visualisation rules expressed in SLD). As QGIS desktop and QGIS Server use the same visualization libraries, the maps that are published on the web look the same as in desktop GIS. The Publish to Web plugin currently supports basic symbolization, with more complex cartographic visualisation rules introduced manually. As the conguration is performed with the SLD standard and its documented extensions, there is only one standardised language to learn, which greatly simplies the complexity of creating maps for the Web. In one of the following manuals we will provide a sample conguration to set up a QGIS Server. But for now we recommend to read one of the following URLs to get more information:
93
Figure 7.1.: Standard WMS with USA boundaries included in the qgis server
Project Properties and not already done. In a next step open the WMS Server tab under Settings dene the elds Service Capabilities, Coordinate System Restrictions and Advertised Extend. Additionally you can enable the checkbox Add WKT geometry to feature into response to make the layers queryable (see gure 7.2). Now save the session in a project le alaska_airports.qgs.
Figure 7.2.: Denitions for a qgis project WMS server To provide the project as a WMS, we create a new folder /usr/lib/cgi-bin/project with admin privileges and add the project le alaska_airports.qgs and a copy of the qgis_mapserv.fcgi le - thats all. Now we test our project WMS, add the WMS with the URL http://localhost/cgi-bin/project/qgis_mapserv.fcgi as described in section 6.2.2 to QGIS and load the WMS, see gure 7.3.
94
95
If you want to dene the coordinate reference system for a certain layer without CRS information, you can also do that in the General tab of the raster (Section 5.3.4) and vector (Section 4.4.8) properties dialog. If your layer already has a CRS dened, it will be displayed as shown in Figure 4.6.
97
Figure 8.1.: CRS tab in the QGIS Options Dialog QGIS Tip 34 CRS IN THE M AP L EGEND Right clicking on a layer in the Map Legend (Section 3.2.3) provides two CRS short cuts.
takes you directly to the Coordinate Reference System Selector dialog. Which
you also get to by the Select button on the General tab of the layer properties dialog. Set project CRS from Layer
There are three ways to achieve this end: 1. Select Project Properties from the Edit (Gnome, OSX) or Settings (KDE, Windows) menu. CRS status icon in the lower right-hand corner of the statusbar. tab of the Options dialog and selecting
2. Click on the
3. Turn OTF on by default, by selecting the CRS Enable on the y reprojection by default
If you have already loaded a layer, and want to enable OTF projection, the best practice is to open the Coordinate Reference System tab of the Project Properties dialog, select the a CRS, and activate the Enable on the y projection checkbox. The CRS status icon will no longer be greyed-out and
all layers will be OTF projected to the CRS shown next to the icon. The Coordinate Reference System tab of the Project Properties dialog contains ve important components as shown in Figure 8.2 and described below.
98
1. Enable on the y projection - this checkbox is used to enable or disable OTF projection. When off, each layer is drawn using the coordinates as read from the data source. When on, the coordinates in each layer are projected to the coordinate reference system dened for the map canvas. 2. Coordinate Reference System - this is a list of all CRS supported by QGIS, including Geographic, Projected and Custom coordinate reference systems. To use a CRS, select it from the list by expanding the appropriate node and selecting the CRS. The active CRS is preselected. 3. Proj4 text - this is the CRS string used by the Proj4 projection engine. This text is read-only and provided for informational purposes. 4. Search - if you know the EPSG code, the identier or the name for a Coordinate Reference System, you can use the search feature to nd it. Enter the identier and click on Find . Use the Hide deprecated CRSs checkbox to show only the currently valid projections. 5. Recently used CRS - if you have certain CRS that you frequently use in your everyday GIS work, these will be displayed in the table at the bottom of the Projection Dialog. Click on one of these buttons to select the associated CRS.
QGIS Tip 35 P ROJECT P ROPERTIES D IALOG If you open the Project Properties dialog from the Edit (Gnome, OSX) or Settings (KDE, Windows)
menu, you must click on the Coordinate Reference System tab to view the CRS settings. Opening the dialog from the CRS status icon will automatically bring the Coordinate Reference System tab to the front.
99
Figure 8.3.: Custom CRS Dialog Dening a custom CRS in QGIS requires a good understanding of the Proj.4 projection library. To begin, refer to the Cartographic Projection Procedures for the UNIX Environment - A Users Manual by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990 (available at ftp://ftp.remotesensing. org/proj/OF90-284.pdf). This manual describes the use of the proj.4 and related command line utilities. The cartographic parameters used with proj.4 are described in the user manual, and are the same as those used by QGIS. The Custom Coordinate Reference System Denition user CRS: 1. a descriptive name and 2. the cartographic parameters in PROJ.4 format. To create a new CRS, click the New button and enter a descriptive name and the CRS parameters. Save . dialog requires only two parameters to dene a
After that you can save your CRS by clicking the button
Note that the Parameters must begin with a +proj=-block, to represent the new coordinate reference system. You can test your CRS parameters to see if they give sane results by clicking on the Calculate button inside the Test block and pasting your CRS parameters into the Parameters eld. Then enter known WGS 84 latitude and longitude values in North and East elds respectively. Click on Calculate and compare the results with the known values in your coordinate reference system.
100
and click OK .
You can now start loading raster and vector layers from an existing GRASS LOCATION (see Section 9.2). Or you create a new GRASS LOCATION with QGIS (see Section 9.3.1) and import some raster and vector data (see Section 9.4) for further analysis with the GRASS Toolbox (see Section 9.9).
101
9.3. GRASS LOCATION and MAPSET 3. If not already done in a previous QGIS session, load the GRASS plugin clicking on Plugins Manage Plugins and selecting GRASS 4. In the GRASS toolbar, click the
5. For Gisdbase browse and select or enter the path to the newly created folder grassdata. 6. You should now be able to select the LOCATION alaska and the MAPSET demo. 7. Click OK . Notice that some previously disabled tools in the GRASS toolbar are now enabled. 8. Click on Add GRASS raster layer , choose the map name gtopo30 and click OK . The elevation
layer will be visualized. 9. Click on Add GRASS vector layer , choose the map name alaska and click OK . The alaska
boundary vector layer will be overlayed on top of the gtopo30 map. You can now adapt the layer properties as described in chapter 4.4, e.g. change opacity, ll and outline color. 10. Also load the other two vector layers rivers and airports and adapt their properties. As you see, it is very simple to load GRASS raster and vector layers in QGIS. See following Sections for editing GRASS data and creating a new LOCATION. More sample GRASS LOCATIONs are available at the GRASS website at http://grass.osgeo.org/download/data.php. QGIS Tip 36 GRASS DATA L OADING If you have problems loading data or QGIS terminates abnormally, check to make sure you have loaded the GRASS plugin properly as described in Section 9.1.
4. Select an existing GRASS database (GISDBASE) folder grassdata or create one for the new LOCATION using a le manager on your computer. Then click Next . 5. We can use this wizard to create a new MAPSET within an existing LOCATION (see Section 9.3.2) or to create a new LOCATION altogether. Click on the radio button
1 This
(see Figure
is not strictly true - with the GRASS modules r.external and v.external you can create read-only links to external GDAL/OGRsupported data sets without importing them. But because this is not the usual way for beginners to work with GRASS, this functionality will not be described here.
102
Figure 9.1.: GRASS data in the alaska LOCATION (adapted from Neteler & Mitasova 2008 [4])
9.2). 6. Enter a name for the LOCATION - we used alaska and click Next 7. Dene the projection by clicking on the radio button Projection to enable the projection list
8. We are using Albers Equal Area Alaska (feet) projection. Since we happen to know that it is represented by the EPSG ID 2964, we enter it in the search box. (Note: If you want to repeat this process for another LOCATION and projection and havent memorized the EPSG ID, click on the lower right-hand corner of the status bar (see Section 8.3)). 9. Click Find to select the projection 10. Click Next 11. To dene the default region, we have to enter the LOCATION bounds in north, south, east, and west direction. Here we simply click on the button Set current QGIS extent , to apply the extend of the loaded layer alaska.shp as the GRASS default region extend. 12. Click Next 13. We also need to dene a MAPSET within our new LOCATION. You can name it whatever you like - we used demo. 2 14. Check out the summary to make sure its correct and click Finish 15. The new LOCATION alaska and two MAPSETs demo and PERMANENT are created. The currently opened working set is MAPSET demo, as you dened. 16. Notice that some of the tools in the GRASS toolbar that were disabled are now enabled. If that seemed like a lot of steps, its really not all that bad and a very quick way to create a LOCATION. The LOCATION alaska is now ready for data import (see Section 9.4). You can also use the already existing vector and raster data in the sample GRASS LOCATION alaska included in the QGIS alaska dataset 2.2 and move on to Section 9.5. a
2 When
creating a new LOCATION, GRASS automatically creates a special MAPSET called PERMANENT designed to store the core data for the project, its default spatial extend and coordinate system denitions (Neteler & Mitasova 2008 [4]).
103
3. Select the GRASS database (GISDBASE) folder grassdata with the LOCATION alaska, where we want to add a further MAPSET, called test. 4. Click Next . 5. We can use this wizard to create a new MAPSET within an existing LOCATION or to create a new LOCATION altogether. Click on the radio button Select location (see Figure 9.2) and click Next .
6. Enter the name text for the new MAPSET. Below in the wizard you see a list of existing MAPSETs and its owners. 7. Click Next , check out the summary to make sure its all correct and click Finish
3. Select as GRASS database the folder grassdata in the QGIS alaska dataset, as LOCATION alaska, as MAPSET demo and click OK . 4. Now click the Open GRASS tools icon. The GRASS Toolbox (see Section 9.9) dialog appears.
104
5. To import the raster map landcover.img, click the module r.in.gdal in the Modules Tree tab. This GRASS module allows to import GDAL supported raster les into a GRASS LOCATION. The module dialog for r.in.gdal appears. 6. Browse to the folder raster in the QGIS alaska dataset and select the le landcover.img. 7. As raster output name dene landcover_grass and click Run . In the Output tab you see the currently running GRASS command r.in.gdal -o input=/path/to/landcover.img output=landcover_grass. 8. When it says Succesfully nished click View output . The landcover_grass raster layer is now imported into GRASS and will be visualized in the QGIS canvas. 9. To import the vector GML le lakes.gml, click the module v.in.ogr in the Modules Tree tab. This GRASS module allows to import OGR supported vector les into a GRASS LOCATION. The module dialog for v.in.ogr appears. 10. Browse to the folder gml in the QGIS alaska dataset and select the le lakes.gml as OGR le. 11. As vector output name dene lakes_grass and click Run . You dont have to care about the other options in this example. In the Output tab you see the currently running GRASS command v.in.ogr -o dsn=/path/to/lakes.gml output=lakes_grass. 12. When it says Succesfully nished click View output . The lakes_grass vector layer is now imported into GRASS and will be visualized in the QGIS canvas.
3 Although
it is possible to mix geometry elements, it is unusual and even in GRASS only used in special cases such as vector network analysis. Normally you should prefere to store different geometry elements in different layers.
105
toolbar icon. Enter a name in the text box and you can start digitizing point, line or polygon geometries, following the procedure described in Section 9.7. In GRASS it is possible to organize all sort of geometry types (point, line and area) in one layer, because GRASS uses a topological vector model, so you dont need to select the geometry type when creating a new GRASS vector. This is different from Shapele creation with QGIS, because Shapeles use the Simple Feature vector model (see Section 4.5.5). QGIS Tip 38 C REATING AN ATTRIBUTE TABLE FOR A NEW GRASS VECTOR LAYER If you want to assign attributes to your digitized geometry features, make sure to create an attribute table with columns before you start digitizing (see Figure 9.7).
on the toolbar. Make sure you have loaded a GRASS vector and it is the selected layer in the legend before clicking on the edit tool. Figure 9.4 shows the GRASS edit dialog that is displayed when you click on the edit tool. The tools and settings are discussed in the following sections. QGIS Tip 39 D IGITIZING POLYGONS IN GRASS If you want to create a polygon in GRASS, you rst digitize the boundary of the polygon, setting the mode to No category. Then you add a centroid (label point) into the closed boundary, setting the mode to Next not used. The reason is, that a topological vector model links attribute information of a polygon always to the centroid and not to the boundary. Toolbar In Figure 9.3 you see the GRASS digitizing toolbar icons provided by the GRASS plugin. Table 9.1 explains the available functionalities.
Figure 9.3.: GRASS Digitizing Toolbar Category Tab The Category tab allows you to dene the way in which the category values will be assigned to a new geometry element. Mode: what category value shall be applied to new geometry elements. Next not used - apply next not yet used category value to geometry element. Manual entry - manually dene the category value for the geometry element in the Category-entry eld. No category - Do not apply a category value to the geometry element. This is e.g. used for area boundaries, because the category values are connected via the centroid. Category - A number (ID) is attached to each digitized geometry element. It is used to connect each geometry element with its attributes. Field (layer) - Each geometry element can be connected with several attribute tables using different GRASS geometry layers. Default layer number is 1.
106
Icon
Tool New Point New Line New Boundary New Centroid Move vertex Add vertex Delete vertex
Purpose Digitize new point Digitize new line (nish by selecting new tool) Digitize new boundary (nish by selecting new tool) Digitize new centroid (label existing area) Move one vertex of existing line or boundary and identify new position Add a new vertex to existing line Delete vertex from existing line (conrm selected vertex by another click) Move selected boundary, line, point or centroid and click on new position Split an existing line to 2 parts Delete existing boundary, line, point or centroid (conrm selected element by another click) Edit attributes of selected element (note that one element can represent more features, see above) Close session and save current status (rebuilds topology afterwards) Table 9.1.: GRASS Digitizing Tools
Edit attributes
Close
Settings Tab The Settings tab allows you to set the snapping in screen pixels. The threshold denes at what distance new points or line ends are snapped to existing nodes. This helps to prevent gaps or dangles between boundaries. The default is set to 10 pixels. Symbology Tab The Symbology tab allows you to view and set symbology and color settings for various geometry types and their topological status (e.g. closed / opened boundary). Table Tab The Table tab provides information about the database table for a given layer. Here you can add new columns to an existing attribute table, or create a new database table for a new GRASS vector layer (see Section 9.6).
107
Figure 9.4.: GRASS Digitizing Category Tab QGIS Tip 40 C REATING AN ADDITIONAL GRASS LAYER WITH QGIS If you would like to add more layers to your dataset, just add a new number in the Field (layer) entry box and press return. In the Table tab you can create your new table connected to your new layer.
the symbology of the GRASS region rectangle in the QGIS canvas. Type in the new region bounds and resolution and click OK . It also allows to select a new region interactively with your mouse on the QGIS canvas. Therefore click with the left mouse button in the QGIS canvas, open a rectangle, close it using the left mouse button again and click OK . The GRASS module g.region provide a lot more parameters to dene an appropriate region extend and resolution for your raster analysis. You can use these parameters with the GRASS Toolbox, described in Section 9.9.
lected GRASS LOCATION and MAPSET. To use the GRASS toolbox you need to open a LOCATION and MAPSET where you have write-permission (usually granted, if you created the MAPSET). This is necessary, because new raster or vector layers created during analysis need to be written to the currently selected LOCATION and MAPSET. The GRASS Shell inside the GRASS Toolbox provides access to almost all (more than 330) GRASS modules through a command line interface. To offer a more user friendly working environment, about 200 of the available GRASS modules and functionalities are also provided by graphical dialogs within the GRASS plugin Toolbox.
108
109
QGIS Tip 41 GRASS E DIT P ERMISSIONS You must be the owner of the GRASS MAPSET you want to edit. It is impossible to edit data layers in a MAPSET that is not yours, even if you have write permissions.
110
111
9.9. The GRASS toolbox Options The Options tab provides a simplied module dialog where you can usually select a raster or vector layer visualized in the QGIS canvas and enter further module specic parameters to run the module. The provided module parameters are often not complete to keep the dialog clear. If you want to use further module parameters and ags, you need to start the GRASS Shell and run the module in the command line. A new feature in QGIS 1.7.0 is the support for a show advanced options button below the simplied module dialog in the Options tab. At the moment it is only added to the module v.in.ascii as an example use, but will probably be part of more / all modules in the GRASS toolbox in future versions of QGIS. This allows to use the complete GRASS module options without the need to switch to the GRASS Shell. Output The Output tab provides information about the output status of the module. When you click the Run
button, the module switches to the Output tab and you see information about the analysis process. If all works well, you will nally see a Successfully finished message. Manual The Manual tab shows the HTML help page of the GRASS module. You can use it to check further module parameters and ags or to get a deeper knowledge about the purpose of the module. At the end of each module manual page you see further links to the Main Help index, the Thematic index and the Full index. These links provide the same information as if you use the module g.manual QGIS Tip 42 D ISPLAY RESULTS IMMEDIATELY If you want to display your calculation results immediately in your map canvas, you can use the View Output button at the bottom of the module tab.
Now load the gtopo30 elevation raster by clicking gtopo30 raster from the demo location. Now open the Toolbox with the
Now a single click on the tool r.contour will open the tool dialog as explained above 9.9.2. The gtopo30 gtopo30 . raster should appear as the Name of input raster Type into the Increment between Contour levels at intervals of 100 meters.) Type into the Name for output vector map 100 the value 100. (This will create contour lines the name ctour_100.
ctour_100
Click Run to start the process. Wait for several moments until the message Successfully finished appears in the output window. Then click View Output and close .
112
Figure 9.10.: GRASS Toolbox r.contour module Since this is a large region, it will take a while to display. After it nishes rendering, you can open the layer properties window to change the line color so that the contours appear clearly over the elevation raster, as in 4.4. Next zoom in to a small mountainous area in the center of Alaska. Zooming in close you will notice that the contours have sharp corners. GRASS offers the v.generalize tool to slightly alter vector maps while keeping their overall shape. The tool uses several different algorithms with different purposes. Some of the algorithms (i.e. Douglas Peuker and Vertex reduction) simplify the line by removing some of the vertices. The resulting vector will load faster. This process will be used when you have a highly detailed vector, but you are creating a very small scale map, so the detail is unnecessary. QGIS Tip 43 T HE
SIMPLIFY TOOL
Note that the QGIS fTools plugin has a Simplify geometries v.generalize Douglas-Peuker algorithm.
However, the purpose of this example is different. The contour lines created by r.contour have sharp angles that should be smoothed. Among the v.generalize algorithms there is Chaikens which does just that (also Hermite splines). Be aware that these algorithms can add additional vertices to the vector, causing it to load even more slowly. Open the GRASS toolbox and double click the categories Vector then click on the v.generalize module to open its options window. Develop map ctour_100 . Generalization,
Check that the ctour_100 vector appears as the Name of input vector
From the list of algorithms choose Chaikens. Leave all other options at their default, and scroll down to ctour_100_smooth , and click Run . the last row to enter the Name for output vector map The process takes several moments. Once Successfully finished appears in the output windows,
113
9.9. The GRASS toolbox click View output and then close . You may change the color of the vector to display it clearly on the raster background and to contrast with the original contour lines. You will notice that the new contour lines have smoother corners than the original while staying faithful to the original overall shape.
Figure 9.11.: GRASS module v.generalize to smooth a vector map QGIS Tip 44 OTHER USES FOR R . CONTOUR The procedure described above can be used in other equivalent situations. If you have a raster map of precipitation data, for example, then the same method will be used to create a vector map of isohyetal (constant rainfall) lines Creating a Hillshade 3D effect Several methods are used to display elevation layers and give a 3D effect to maps. The use of contour lines as shown above is one popular method often chosen to produce topographic maps. Another way to display a 3D effect is by hillshading. The hillshade effect is created from a DEM (elevation) raster by rst calculating the slope and aspect of each cell, then simulating the suns position in the sky and giving a reectance value to each cell. Thus you get sun facing slopes lighted and the slopes facing away from the sun (in shadow) are darkened. Begin this example by loading the gtopo30 elevation raster. Start the GRASS toolbox and under the Raster category double click to open Spatial analysis Terrain analysis. Then click r.shaded.relief to open the module. Change the azimuth angle click run . 270 to 315. Enter gtopo30_shade for the new hillshade raster, and
When the process completes, add the hillshade raster to the map. You should see it displayed in grayscale.
114
9.9.3. GRASS module examples To view both the hill shading and the colors of the gtopo30 together shift the hillshade map below the I window of gtopo30, switch to gtopo30 map in the table of contents, then open the Properties the transparency tab and set its transparency level to about 25%. You should now have the gtopo30 elevation with its colormap and transparency setting displayed above the grayscale hillshade map. In order to see the visual effects of the hillshading, turn off the gtopo30_shade map, then turn it back on. Using the GRASS shell The GRASS plugin in QGIS is designed for users who are new to GRASS, and not familiar with all the modules and options. As such, some modules in the toolbox do not show all the options available, and some modules do not appear at all. The GRASS shell (or console) gives the user access to those additional GRASS modules that do not appear in the toolbox tree, and also to some additional options to the modules that are in the toolbox with the simplest default parameters. This example demonstrates the use of an additional option in the r.shaded.relief module that was shown above.
Figure 9.12.: The GRASS shell, r.shaded.relief module The module r.shaded.relief can take a parameter zmult which multiplies the elevation values relative to the X-Y coordinate units so that the hillshade effect is even more pronounced. Load the gtopo30 elevation raster as above, then start the box and click on the GRASS shell. In the shell window type r.shaded.relief map=gtopo30 shade=gtopo30_shade2 azimuth=315 zmult=3 and press Enter . GRASS toolthe command:
After the process nishes shift to the Browse tab and double click on the new gtopo30_shade2 raster to display in QGIS. As explained above, shift the shaded relief raster below the gtopo30 raster in the Table of Contents, then check transparency of the colored gtopo30 layer. You should see that the 3D effect stands out more
115
9.9. The GRASS toolbox strongly compared to the rst shaded relief map.
Figure 9.13.: Displaying shaded relief created with the GRASS module r.shaded.relief Raster statistics in a vector map The next example shows how a GRASS module can aggregate raster data and add columns of statistics for each polygon in a vector map. Again using the Alaska data, refer to 9.4 to import the trees shapele from the shapefiles directory into GRASS. Now an intermediary step is required: centroids must be added to the imported trees map to make it a complete GRASS area vector (including both boundaries and centroids). From the toolbox choose Vector Enter as the output vector map Manage features, and open the module v.centroids. forest_areas and run the module.
Now load the forest_areas vector and display the types of forests - deciduous, evergreen, mixed - in I window, symbology tab, choose different colors: In the layer Properties Legend type Unique value and set the Classication eld VEGDESC to VEGDESC.
(Refer to the explanation of the symbology tab 4.4.1 in the vector section). Next reopen the GRASS toolbox and open Vector Vector update by other maps. Click on the v.rast.stats module. Enter gtopo30, and forest_areas. Only one additional parameter is needed: Enter column prex elev , and click run . This is a computationally heavy operation which will run for a long time (probably up to two hours). Finally open the forest_areas attribute table, and verify that several new columns have been added including elev_min, elev_max, elev_mean etc. for each forest polygon.
116
9.9.5. Customizing the GRASS Toolbox In the left browser windows you can browse through all MAPSETs inside the current LOCATION. The right browser window shows some meta information for selected raster or vector layers, e.g. resolution, bounding box, data source, connected attribute table for vector data and a command history.
Figure 9.14.: GRASS LOCATION browser The toolbar inside the Browser tab offers following tools to manage the selected LOCATION: The Add selected map to canvas Copy selected map Rename selected map Delete selected map Set current region to selected map Refresh browser window Rename selected map and Delete selected map only work with maps inside your currently
selected MAPSET. All other tools also work with raster and vector layers in another MAPSET.
117
9.9. The GRASS toolbox <!DOCTYPE qgisgrassmodule SYSTEM "http://mrcc.com/qgisgrassmodule.dtd"> <qgisgrassmodule label="Vector buffer" module="v.buffer"> <option key="input" typeoption="type" layeroption="layer" /> <option key="buffer"/> <option key="output" /> </qgisgrassmodule> The parser reads this denition and creates a new tab inside the toolbox when you select the module. A more detailed description for adding new modules, changing the modules group, etc. can be found on the QGIS wiki at http://wiki.qgis.org/qgiswiki/Adding_New_Tools_to_the_GRASS_Toolbox.
118
Icon
Purpose Load from template Export to an image format Export print composition to SVG Zoom to full extend Zoom out Revert last change Add new map from QGIS map canvas Add new map from QGIS map canvas Add label to print composition Add new scalebar to print composition Add arrow to print composition Select/Move item in print composition Group items of print composition Raise selected items Move selected items to top Align selected items left Align selected items center Align selected items top
Icon
Purpose Save as template Export as PDF Print or export as Postscript Zoom in Refresh view Restore last change Add Image to print composition Add Image to print composition Add new legend to print composition Add basic shape to print composition Add attribute table to print composition Move content within an item Ungroup items of print composition Lower selected items Move selected items to bottom Align selected items right Align selected items center vertical Align selected items bottom
to SVG supported, but it is not working properly with some recent QT4 versions. You should try and check individual on your system
119
10.2. Using Print Composer All Print Composer tools are availabe in menus and as icons in a toolbar. The toolbar can be switched off and on using the right mouse button holding the mouse over the toolbar.
Figure 10.1.: Print Composer Opening the print composer provides you with a blank canvas to which you can add the current QGIS map canvas, legend, scalebar, images, basic shapes, arrows and text. Figure 10.1 shows the initial view of the print composer with an activated Snap to grid mode but before any elements are added. The print composer
120
provides two tabs: The General tab allows you to set paper size, orientation, the print quality for the output le in dpi Snap to grid feature
only works, if you dene a grid resolution > 0. Furthermore you can also activate the Print as raster checkbox. This means all elements will be rastered before printing or saving as Postscript of PDF. The Item tab displays the properties for the selected map element. Click the Select/Move item
icon to select an element (e.g. legend, scalebar or label) on the canvas. Then click the Item tab and customize the settings for the selected element. The Command history tab displays a history of all changes applied to the print composer layout. With a mouse click it is possible to undo and redo layout steps back and forth to a certain status. You can add multiple elements to the composer. It is also possible to have more than one map view or legend or scalebar in the print composer canvas. Each element has its own properties and in the case of the map, its own extent. If you want to remove an elements from the composer canvas. you can do that with the delete or the backspace key.
composer toolbar and drag a rectangle on the composer canvas with the left mouse button to add the map. To display the current map, you can choose between three different modes in the map Item tab: Preview Rectangle is the default setting. It only displays an empty box with a message "Map
will be printed here". Preview Cache renders the map in the current screen resolution. If case you zoom in or out
the composer window, the map is not rendered again but the image will be scaled. Preview Render means, that if you zoom in or out the composer window, the map will be
rendered again, but for space reasons, only up to a maximum resolution. Cache is default preview mode for newly added print composer maps. You can resize the map element by clicking on the Select/Move item button, selecting the element,
and dragging one of the blue handles in the corner of the map. With the map selected, you can now adapt more properties in the map Item tab. To move layers within the map element select the map element, click the Move item content icon and
move the layers within the map element frame with the left mouse button. After you found the right place for an element, you can lock the element position within the print composer canvas. Select the map element and click on the right mouse button to lock the map element also activating the Item tab. lock the element position and again to unlock the element. You can Lock layers for map item checkbox in the Map dialog of the Map
Note: QGIS 1.7.0 is now able to show labels from the new labeling plugin also in the map composer, but it is not yet scaled correctly. So it might be necessary to switch back to the standard labeling in some cases.
121
Figure 10.2.: Print Composer map item tab - Map and Extents dialog
dinate frame can only be added with the default value 0. Furthermore you can enable the checkboxes Lock layers for map items and
If you change the view on the QGIS map canvas by zooming or panning or changing vector or raster properties, you can update the print composer view selecting the map element in the print composer and clicking the Update preview button. Extents dialog The Extents dialog of the map item tab provides following functionalities (see Figure 10.2b)): The Map extent area allow to specify the map extent using Y and X min/max values or clicking the Set to map canvas extent button. If you change the view on the QGIS map canvas by zooming or panning or changing vector or raster properties, you can update the print composer view selecting the map element in the print composer and clicking the Update preview button in the map Item tab (see Figure 10.2a)).
122
Figure 10.3.: Print Composer map item tab - Grid and General options dialog
to use solid line or cross. Furthermore you can dene an interval in X and Y direction, an X and Y offset, and the width used for cross or line grid type. The Draw annotation checkbox allows to add coordinates to the map frame. The annotation can be drawn inside or outside the map frame. The annotation direction can be dened as horizontal, vertical, horizontal and vertical, or boundary direction. And nally you can dene the grid color, the annotation font, the annotation distance from the map frame and the precision of the drawn coordinates. General options dialog The General options dialog of the map item tab provides following functionalities (see Figure 10.3b)): Here you can dene color and outline width for the element frame, set a background color and opacity for the map canvas. The Position button opens the Set items position dialog and allows to set the map canvas position using reference points or coordinates. Furthermore you can select or unselect to display the element frame with the Show frame checkbox.
123
composer canvas and position and customize their appearance in the label item tab.
Figure 10.4.: Print composer label item tab - Label options and General options dialog
Label dialog The Label dialog of the label item tab provides following functionalities (see Figure 10.4a)): The Label dialog offers to add text labels to the composer canvas. You can dene the horizontal and vertical alignment, select font and fontcolor for the text and it is possible to dene a text margin im mm. General options dialog The General options dialog of the label item tab provides following functionalities (see Figure 10.4b)): Here you can dene color and outline width for the element frame, set a background color and opacity for the label. The Position button opens the Set items position dialog and allows to set the map canvas position using reference points or coordinates. Furthermore you can select or unselect to display the element frame with the Show frame checkbox.
124
10.4.2. Image item tab - Picture options and General options dialog
10.4.2. Image item tab - Picture options and General options dialog
To add an image, click the Add image icon, place the element with the left mouse button on the print
composer canvas and position and customize their appearance in the image item tab.
Figure 10.5.: Print composer image item tab - Picture options and General options
Picture options dialog The Picture options dialog of the image item tab provides following functionalities (see Figure 10.5a)): The Search directories area allows to add and remove directories with images in SVG format to the picture database. The Preview eld then shows all pictures stored in the selected directories. The Options area shows the current selected picture and allows to dene width, height and clockwise rotation of the picture. It is also possible to add a user specic SVG path. Activating the Sync from map checkbox synchronizes the rotation of a picture in the qgis map canvas (i.e. a rotated north arrow) with the appropriate print composer image. General options dialog The General options dialog of the image item tab provides following functionalities (see Figure 10.5b)): Here you can dene color and outline width for the element frame, set a background color and opacity for the picture. The Position button opens the Set items position dialog and allows to set the map canvas position using reference points or coordinates. Furthermore you can select or unselect to display the element frame with the Show frame checkbox.
125
10.4.3. Legend item tab - General, Legend items and Item option dialog
To add a map legend, click the Add new legend icon, place the element with the left mouse button on
the print composer canvas and position and customize their appearance in the legend item tab.
Figure 10.6.: Print composer legend item tab - General, Legend items and Item option dialog General dialog The General dialog of the legend item tab provides following functionalities (see Figure 10.6a)): Here you can adapt the legend title. You can change the font of the legend title, layer and item name. You can change width and height of the legend symbol and you can add layer, symbol, icon label and box space. Legend items dialog The Legend items dialog of the legend item tab provides following functionalities (see Figure 10.6b)): The legend items window lists all legend items and allows to change item order, edit layer names, remove and restore items of the list. After changing the symbology in the QGIS main window you can click on Update to adapt the changes in the legend element of the print composer. The item order can be changed using the Up and Down buttons or with Drag and Drop functionality. Item options dialog The Item options dialog of the legend item tab provides following functionalities (see Figure 10.6c)): Here you can dene color and outline width for the element frame, set a background color and opacity for the legend. The Position button opens the Set items position dialog and allows to set the map
126
10.4.4. Scalebar item tab - Scalebar and General options dialog canvas position using reference points or coordinates. Furthermore you can select or unselect to display the element frame with the Show frame checkbox.
the print composer canvas and position and customize their appearance in the scalebar item tab.
Figure 10.7.: Print composer scalebar item tab - Scalebar and General options dialog
Scalebar dialog The Scalebar dialog of the scalebar item tab provides following functionalities (see Figure 10.7a)): The scalebar dialog allows to dene the segment size of the scalebar in map units, the map units used per bar units, and how many left and right segments units from 0 should be used. You can dene the scalebar style, available is single and double box, line ticks middle, up and down and a numeric style. Furthermore you can dene height, line width, label and box space of the scale bar. Add a unit label and dene the scalebar font and color. General options dialog The General options dialog of the scalebar item tab provides following features (see Figure 10.7b)): Here you can dene color and outline width for the element frame, set a background color and opacity for the scalebar. The Position button opens the Set items position dialog and allows to set the map canvas position using reference points or coordinates. Furthermore you can select or unselect to display the element frame with the Show frame checkbox.
127
or by mouse click within the Command history tab (see gure 10.8).
128
Figure 10.9.: Print composer basic shape and arrow item tab - Shape and Arrow options dialog
The Shape dialog allows to draw an ellipse, rectangle, or triangle in the print composer canvas. You can dene its outline and ll color, the outline width and a clockwise rotation. The Arrow dialog allows to draw an arrow in the print composer canvas. You can dene color, outline and arrow width and it is possible to use a default marker and no marker and a SVG marker. For the SVG marker you can additionally add a SVG start and end marker from a directory on your computer.
Figure 10.10.: Print composer attribute table item tab - Table and General options dialog
129
10.11. Saving and loading a print composer layout Table dialog The Table dialog of the attribute table item tab provides following functionalities (see Figure 10.10a)): The Table dialog allows to select the vector layer and columns of the attribute table. Attribute columns can be sorted and you can dene to show its values ascending or descending. You can dene the maximum number of rows to be displayed and if attributes are only shown for visible features of the current composer canvas. Additionally you can dene the grid characteristics of the table and the header and content font. General options dialog The General options dialog of the attribute table item tab provides following functionalities (see Figure 10.10b)): Here you can dene color and outline width for the element frame, set a background color and opacity for the table. The Position button opens the Set items position dialog and allows to set the map canvas position using reference points or coordinates. Furthermore you can select or unselect to display the element frame with the Show frame checkbox.
Choose an element on the print composer canvas and select the matching functionality to raise or lower the selected element compared to the other elements (see table 10.1). There are several alignment functionalities available within the Align selected items pulldown menu
(see table 10.1). To use an alignment functionality , you rst select some elements and then click on the matching alignment icon. All selected will then be aligned within to their common bounding box.
installed printer drivers. The Export as image icon exports the composer canvas in several image formats such as PNG,
BPM, TIF, JPG, . . . The The Export as PDF saves the dened print composer canvas directly as a PDF. Export as SVG icon saves the print composer canvas as a SVG (Scalable Vector Graphic).
Note: Currently the SVG output is very basic. This is not a QGIS problem, but a problem of the underlaying Qt library. This will hopefully be sorted out in future versions.
print composer session as a *.qpt template and load the template again in another session.
130
Figure 10.11.: Print Composer with map view, legend, scalebar, coordinates and text added
The
Composer Manager
Composer Manager
allows to
131
Figure 11.1.: Plugin Manager The Plugin Manager lists all the available plugins and their status (loaded or unloaded), including all core
133
11.1. Managing Plugins plugins and all external plugins that have been installed and automatically activated using the Python Plugin Installer (see Section ??). Those plugins that are already loaded have a check mark to the left of their name. Figure 11.1 shows the Plugin Manager dialog. To enable a particular plugin, click on the checkbox to the left of the plugin name, and click OK . When you exit the application, a list of loaded plugins is retained, and the next time you run QGIS these plugins are automatically loaded. QGIS Tip 45 C RASHING P LUGINS If you nd that QGIS crashes on startup, a plugin may be at fault. You can stop all plugins from loading by editing your stored settings le (see 3.7 for location). Locate the plugins settings and change all the plugin values to false to prevent them from loading. For example, to prevent the Delimited text plugin from loading, the entry in $HOME/.cong/QuantumGIS/qgis.conf on Linux should look like this: Add Delimited Text Layer=false. Do this for each plugin in the [Plugins] section. You can then start QGIS and add the plugins one at a time from the Plugin Manager to determine which plugin is causing the problem.
Fetch Python Plugins... . The Plugin Installer window will appear (gure 11.2) with the tab Plugins ,
1 Updates 2 fTools,
of core plugins may be available in this repository as external overlays. Mapserver Export, and the Plugin Installer are Python plugins, but they are also part of the QGIS sources, and are automatically loaded and enabled inside the QGIS Plugin Manager (see Section 11.1.2).
134
containing a list of all locally installed Python plugins, as well as plugins available in remote repositories. Each plugin can be either: not installed - this means the plugin is available in the repository, but is not installed yet. In order to install it, select the plugin from the list and click the Install plugin button. new - this means that the plugin is newly available in the repository. installed - this indicates that the plugin is already installed. If it is also available in any repository the Reinstall plugin button will be enabled. If the available version is older than the installed version, the Downgrade plugin button will appear instead. upgradeable - this means that the plugin is installed, but there is an updated version available. In this case, the Upgrade plugin and Upgrade all buttons will be enabled. invalid - this means that the plugin is installed, but is unavailable or broken. The reason will be explained in the plugin description eld. Plugins tab To install a plugin, select it from the list and click the Install plugin button. The plugin is then activated and installed in its own directory. Linux and other unices: ./share/qgis/python/plugins /home/$USERNAME/.qgis/python/plugins Mac OS X: ./Contents/MacOS/share/qgis/python/plugins /Users/$USERNAME/.qgis/python/plugins Windows: C:\Program Files\QGIS\python\plugins C:\Documents and Settings\$USERNAME\.qgis\python\plugins
If the installation is successful, a conrmation message will appear. If the installation fails, the reason for the failure will be displayed in a warning dialog. Most often, errors are the result of connection problems and/or missing Python modules. In the former case you will likely need to wait before trying the install again, in the latter case, you should install the missing modules relevant to
135
your operating system prior to using the plugin. via a package manager.
For install instructions in Windows visit the module home page. If you are using a proxy, you may need to congure it under Edit Options (Gnome, OSX) or Settings Options (KDE, Windows) on the Proxy tab. The Uninstall plugin button is enabled only if the selected plugin is installed and is not a core plugin. Note
that if you have installed an update to a core plugin, you can uninstall this update with the Uninstall plugin and revert to the version shipped with Quantum GIS. This default version however, cannot be uninstalled. Repositories tab The second tab Repositories , contains a list of plugin repositories available for the Plugin Installer. By default, only the QGIS Ofcial Repository is enabled. You can add several user-contributed repositories, including the central QGIS Contributed Repository and other external repositories by clicking the Add 3rd party repositories button. The added repositories contain a large number of useful plugins which are not maintained by the QGIS Development Team. As such, we cannot take any responsibility for them. You can also manage the repository list manually, that is add, remove, and edit the entries. Temporarily disabling a particular repository is possible by clicking the Edit... button. Options tab The Options tab is where you can congure the settings of the Plugin Installer. The
checkbox tells QGIS to automatically look for plugin updates and news.
By default, if this feature is enabled all repositories listed and enabled in the Repositories tab are checked for updates each time the program is started. The frequency of update checking can be adjusted using the dropdown menu, and may be adjusted from once a day right up to once a month. If a new plugin or update is available for one of the installed plugins, a notication will appear in the Status Bar. If the checkbox is disabled, looking for updates and news is performed only when the Plugin Installer is manually launched from the menu. Although the plugin installer update can handle ports different from 80, some internet connections will cause problems when attempting to automatically check for updates. In these cases, a Looking for new plugins... indicator will remain visible in the Status Bar during your entire QGIS session, and may cause a program crash when exiting. In this case please disable the checkbox. In addition, you may specify the type of plugins that are displayed by the Python Plugin Installer. Under Allowed plugins, you can specify whether you would like to: Only show plugins from the ofcial repository, Show all plugins except those marked as experimental, or Show all plugins, even those marked as experimental. QGIS Tip 47 U SING EXPERIMENTAL PLUGINS Experimental plugins are generally unsuitable for production use. These plugins are in the early stages of development, and should be considered incomplete or proof of concept tools. The QGIS development team does not recommend installing these plugins unless you intend to use them for
136
137
Icon
Description Download and install python plugins Compute slope, aspect, ruggedness and total curvature of DEMs Solve shortest path problem Shapele to Postgres/PostGIS Import Tool Store vector layers within a SQL anywhere database Draws a scale bar Make spatial queries on vector layers Add WFS layers to the QGIS canvas
Road graph Plugin SPIT SQL Anywhere plugin Scalebar Spatial Query WFS Plugin
Chapter 12.16 Chapter 4.2.4 Chapter 12.18 Chapter 12.2.3 Chapter 12.17 Chapter 6.3
138
Figure 12.1.: Coordinate Cature Plugin 1. Start QGIS, select Project Properties from the Settings (KDE, Windows) or File (Gnome, OSX) projector
menu and click on the Projection tab. As an alternative you you can also click on the icon in the lower right-hand corner of the statusbar.
2. Click on the Enable on the y projection checkbox and select a projected coordinate system of your choice (see also Section 8). 3. Load the coordinate capture plugin in the Plugin Manager (see Section 11.1.1) and ensure that the dialog is visible by going to View > Panels I and ensuring that The cordinate capture dialog appears as shown in Figure 12.1. Coordinate Capture is enabled.
4. Click on the
Click to the select the CRS to use for coordinate display icon and select a different
CRS from the one you selected above. 5. To start capturing coordinates, click on Start capture . You can now click anywhere on the map canvas and the plugin will show the coordinates for both of your selected CRS. 6. To enable mouse coordinate tracking click the mouse tracking icon.
Copyright Label
or
use
the
Copyright Label button from the Toolbar. 3. Enter the text you want to place on the map. You can use HTML as shown in the example 4. Choose the placement of the label from the Placement Bottom Right drop-down box
139
In the example above (default) places a copyright symbol followed by the date in the lower right hand corner of the map canvas.
140
Decorations
Scale Bar
or use the
Scale Bar
button
2. Choose the placement from the Placement 3. Choose the style from the Scale bar style 4. Select the color for the bar Color of bar
5. Set the size of the bar and its label Size of bar 30 degrees 6. Make sure the Enable scale bar checkbox is checked
7. Optionally choose to automatically snap to a round number when the canvas is resized Automatically snap to round number on resize 8. Click OK
Figure 12.4.: Scale Bar Plugin QGIS Tip 48 P LUGINS S ETTINGS S AVED TO P ROJECT When you save a .qgs project, any changes you have made to NorthArrow, ScaleBar and Copyright plugins will be saved in the project and restored nexttime you load the project.
141
12.4. Dxf2Shp Converter Plugin Some items of note about the text le are: 1. The example text le uses ; as delimiter. Any character can be used to delimit the elds. 2. The rst row is the header row. It contains the elds X, Y and ELEV. 3. No quotes (") are used to delimit text elds. 4. The x coordinates are contained in the X eld. 5. The y coordinates are contained in the Y eld. Using the Plugin To use the plugin you must rst enable it as described in Section 11.1. Click the new toolbar icon gure 12.5. Add Delimited Text Layer to open the Delimited Text dialog as shown in
Figure 12.5.: Delimited Text Dialog First select the le (e.g., qgis_sample_data/csv/elevp.csv) to import by clicking on the Browse button. Once the le is selected, the plugin attempts to parse the le using the last used delimiter, in this case a semi-colon (;). To properly parse the le, it is important to select the correct delimiter. To change the delimiter to tab use t (this is a regular expression for the tab character).
Once the le is parsed, choose the X and Y elds from the drop down lists and if available also the WKT eld for the CRS information. Finally enter a Layer name (e.g., elevp ) as shown in Figure 12.5. T o add the layer to the map, click OK . The delimited text le now behaves as any other map layer in QGIS.
Input DXF le: Enter path to the DXF le to be converted Output Shp le: Enter desired name of the Shapele to be created
142
Output le type: Specify the geometry type of the output Shapele. Currently supported types are polyline, polygon, and point. Export text labels: When this checkbox is enabled, an additional Shapele point layer will be created,
and the associated dbf table will contain information about the "TEXT" elds found in the dxf le, and the text strings themselves.
Using the Plugin 1. Start QGIS, load the Dxf2Shape plugin in the Plugin Manager (see Section 11.1.1) and click on the Dxf2Shape Converter icon which appears in the QGIS toolbar menu. The Dxf2Shape plugin dialog appears as shown in Figure 12.6. 2. Enter input DXF le, a name for the output Shapele and the Shapele type. 3. Enable the 4. Click Ok . Export text labels checkbox if you want to create an extra point layer with labels.
section is derived from Horning, N., K. Koy, P. Ersts. 2009. eVis (v1.1.0) Users Guide. American Museum of Natural History, Center for Biodiversity and Conservation. Available from http://biodiversityinformatics.amnh.org/, and released under the GNU FDL.
143
The Generic Event Browser window has three tabs displayed at the top of the window. The Display tab is used to view the photograph and its associated attribute data. The Options tab provides a number of settings that can be adjusted to control the behavior of the eVis plugin. Lastly, the Congure External Applications tab is used to maintain a table of le extensions and their associated application to allow eVis to display documents other than images. Understanding the Display window To see the Display window click on the Display tab in the Generic Event Browser window. The Display window is used to view geocoded photographs and their associated attribute data.
144
12.5.1. Event Browser Display window: A window where the photograph will appear. Increase zoom button: Zoom in to see more detail. If the entire image cannot be displayed in the display window, scroll bars will appear on the left and bottom sides of the window to allow you to pan around the image. Reduce zoom button: Zoom out to see more area. Zoom to full extent button: Displays the full extent of the photograph. Attribute information window: All of the attribute information for the point associated with the photograph being viewed is displayed here. If the le type being referenced in the displayed record is not an image but is of a le type dened in the Congure External Applications tab then when you double-click on the value of the eld containing the path to the le the application to open the le will be launched to view or hear the contents of the le. If the le extension is recognized the attribute data will be displayed in green. Navigation buttons: Use the Previous and Next buttons to load the previous or next feature when more than one feature is selected. Feature indicator: This heading indicates which feature is being displayed and how many features are available for display. Understanding the Options window
Figure 12.8.: The eVis Options window File location: A dropdown list to specify the attribute eld that contains the directory path or URL for the photographs or other documents being displayed. If the location is a relative path then the checkbox to the right of the dropdown menu must be clicked. The base path for a relative path can be entered in
145
12.5. eVis Plugin the Base Path text box below. Information about the different options for specifying the le location are noted in the section 12.5.1 below. Compass bearing display eld: A dropdown list to specify the attribute eld that contains the compass bearing associated with the photograph being displayed. If compass bearing information is available it is necessary to click the checkbox to the left of the dropdown menu title. Compass offset setting: Compass offsets can be used to compensate for declination (adjust bearings collected using magnetic bearings to true north bearings). Click the Manual radio-button to enter the offset in the text box or click the From Attribute radio-button to select the attribute eld containing the offsets. For both of these options east declinations should be entered using positive values and west declinations should use negative values. Directory base path: The base path onto which the relative path dened in Figure 12.8 (A) will be appended. Replace path: If this check-box is checked, only the le name from the A will be appended to the Base Path. Apply rule to all documents: If checked, the same path rules that are dened for photographs will be used for non-image documents such as movies, text documents, and sound les. If not checked the path rules will only apply to photographs and other documents will ignore the Base Path parameter. Save settings: If the check-box is checked the values for the associated parameters will be saved for the next session when the window is closed or when the Save button below is pressed. Reset values: Resets the values on this line to the default setting. Restore faults: This will reset all of the elds to their default settings. It has the same effect as clicking all of the Reset buttons. Save: This will save the settings without closing the Options pane. Understanding the Congure External Applications window
File reference table: A table containing le types that can be opened using eVis. Each le type needs a le extension and the path to an application that can open that type of le. This provides the capability of opening a broad range of les such as movies, sound recordings, and text documents instead of only images. Add new le type: Add a new le type with a unique extension and the path for the application that can open the le. Delete current row: Delete the le type highlighted in the table and dened by a le extension and a path to an associated application. Specifying the location and name of a photograph The location and name of the photograph can be stored using an absolute or relative path or a URL if the photograph is available on a web server. Examples of the different approaches are listed in Table 12.2.
146
Table 12.2.: Example format using absolute path, relative path, and a URL X 780596 780596 780819 780596 Y 1784017 1784017 1784015 1784017 FILE BEARING C:\Workshop\eVis_Data\groundphotos\DSC_0168.JPG 275 /groundphotos/DSC_0169.JPG 80 http://biodiversityinformatics.amnh.org/evis_test_data/DSC_0170.JPG10 pdf:http://www.testsite.com/attachments.php?attachment_id-12 76
Specifying the location and name of a other supporting documents Supporting documents such as text documents, videos, and sound clips can also be displayed or played by eVis. To do this it is necessary to add an entry in the le reference table that can be accessed from the Congure External Applications window in the Generic Event Browser that matches the le extension to an application that can be used to open the le. It is also necessary to have the path or URL to the le in the attribute table for the vector layer. One additional rule that can be used for URLs that dont contain a le extension for the document you want to open is to specify the le extension before the URL. The format is - le extension:URL. The URL is preceded by the le extension and a colon, and is particularly useful for accessing documents from Wikis and other web sites that use a database to manage the web pages (see Table 12.2). Using the Generic Event Browser When the Event Browser window opens a photograph will appear in the display window if the document referenced in the vector le attribute table is an image and if the le location information in the Options window is properly set. If a photograph is expected and it does not appear it will be necessary to adjust the parameters in the Options window. If a supporting document (or an image that does not have a le extension recognized by eVis) is referenced in the attribute table the eld containing the le path will be highlighted in green in the attribute information window if that le extension is dened in the le reference table located in the Congure External Applications window. To open the document double-click on the green-highlighted line in the attribute information window. If a supporting document is referenced in the attribute information window and the le path is not highlighted in green then it will be necessary to add an entry for the les lename extension in the Congure External Applications window. If the le path is highlighted in green but does not open when double-clicked it will be necessary to adjust the parameters in the Options window so the le can be located by eVis. If no compass bearing is provided in the Options window a red asterisk will be displayed on top of the vector feature that is associated with the photograph being displayed. If a compass bearing is provided then an arrow will appear pointing in the direction indicated by the value in the compass bearing display eld in the Generic Event Browser window. The arrow will be centered over the point that is associated with the photograph or other document. To close the Generic Event Browser window click on the Close button from the Display window.
147
12.5. eVis Plugin the Previous and Next buttons. The other controls are described in the Event Browser section of this guide.
Database Connection
The window has three tabs: Predened Queries , Database Connection , and SQL Query . The Output Console window at the bottom of the window displays the status of actions initiated by the different sections of this module. Connect to a database Click on the Database Connection Database Type I dropdown menu to select the type of database that you want to connect to. If a password or username is required, that information can be entered in the Username and Password textboxes. Enter the database host in the Database Host textbox. This option is not available if you selected MSAccess as the database type. If the database resides on your desktop you should enter localhost. Enter the name of the database in the Database Name textbox. If you selected ODBC as the database type, you need to enter the data source name. When all of the parameters are lled in, click on the Connect button. If the connection is successful, a message will be written in the Output Console window stating that the connection was established. If a connection was not established you will need to check that the correct parameters were entered above. Database Type: A dropdown list to specify the type of database that will be used. Database Host: The name of the database host. Port The port number if a MYSQL or PostgreSQL database type is selected. Database Name The name of the database. Connect A button to connect to the database using the parameters dened above. Output Console The console window where messages related to processing are displayed. Username: Username for use when a database is password protected. Password: Password for use when a database is password protected. Predened Queries: Tab to open the Predened Queries window. Database Connection: Tab to open the Database Connection window. SQL Query: Tab to open the SQL Query window. Help: Displays the on line help. OK: Close the main Database Connection window. Running SQL queries SQL queries are used to extract information from a database or ODBC resource. In eVis the output from these queries is a vector layer added to the QGIS map window. Click on the SQL Query tab to display the SQL query interface. SQL commands can be entered in this text window. A helpful tutorial on SQL commands is available at http://www.w3schools.com/sql/. For example, to extract all of the data from a worksheet in an Excel le, select * from [sheet1$] wheresheet1 is the name of the worksheet. Click on the Run Query button to execute the command. If the query is successful a Database File Selection tab to open the database connection interface. Next, click on the
148
Figure 12.10.: The eVis Database connection window window will be displayed. If the query is not successful an error message will appear in the Output Console widow. In the Database File Selection window, enter the name of the layer that will be created from the results of the query in the Name of New Layer textbox. SQL Query Text Window: A screen to type SQL queries. Run Query: Button to execute the query entered in the SQL Query Window. Console Window: The console window where messages related to processing are displayed. Help: Displays the on line help. OK: Closes the main Database Connection window. Use the X Coordinate I and Y Coordinate I dropdown menus to select the eld from the database that store the X (or longitude) and Y (or latitude) coordinates. Clicking on the OK button causes the vector layer created from the SQL query to be displayed in the QGIS map window. To save this vector le for future use, you can use the QGIS Save as... command that is accessed by right clicking on the layer name in the QGIS map legend and then selecting Save as shapele. Running predened queries With predened queries you can select previously written queries stored in XML format in a le. This is particularly helpful if you are not familiar with SQL commands. Click on the Predened Queries tab to
149
display the predened query interface. Open File icon. This opens the Open File window To load a set of predened queries click on the which is used to locate the le containing the SQL queries. When the queries are loaded their titles, as Open File icon, the dened in the XML le, will appear in the dropdown menu located just below the full description of the query is displayed in the text window under the dropdown menu. Select the query you want to run from the dropdown menu and then click on the SQL Query tab to see that the query has been loaded into the query window. If it is the rst time you are running a predened query or are switching databases, you need to be sure to connect to the database. Click on the Run Query button in the SQL Query tab to execute the command. If the query is successful a Database File Selection window will be displayed. If the query is not successful an error message will appear in the Output Console window. Open Query File: Launches the Open File le browser to search for the XML le holding the predened queries. Predened Queries: A dropdown list with all of the queries dened by the predened queries XML le. Query description: A short description of the query. This description is from the predened queries XML le. Console Window: The console window where messages related to processing are displayed.
150
151
12.5. eVis Plugin QGIS Tip 49 C REATING A VECTOR LAYER FROM A M ICROSOFT E XCEL W ORKSHEET When creating a vector layer from a Microsoft Excel Worksheet you might see that unwanted zeros (0) have been inserted in the attribute table rows beneath valid data.This can be caused by deleting the values for these cells in Excel using the backspace key. To correct this problem you need to open the Excel le (youll need to close QGIS if there if you are connected to the le to allow you to edit the le) and then use Edit Delete to remove the blank rows from the le. To avoid this problem you can simply delete several rows in the Delete before saving the le. Excel Worksheet using Edit
Help: Displays the on line help. OK: Closes the main Database Connection window. XML format for eVis predened queries Table 12.3.: The XML tags read by eVis Tag query shortdescription description databasetype databaseport databasename databaseusername databasepassword sqlstatement autoconnect Description Denes the beginning and end of a query statement. A short description of the query that appears in the eVis dropdown menu. A more detailed description of the query displayed in the Predened Query text window. The database type as dened in the Database Type dropdown menu in the Database Connection tab. The port as dened in the Port textbox in the Database Connection tab. The database name as dened in the Database Name textbox in the Database Connection tab. The database username as dened in the Username textbox in the Database Connection tab. The database password as dened in the Password textbox in the Database Connection tab. The SQL command. A ag (true or false) to specify if the above tags should be used to automatically connect to database without running the database connection routine in the Database Connection tab.
A complete sample XML le with three queries is displayed below: <?xml version="1.0"?> <doc> <query> <shortdescription>Import all photograph points</shortdescription> <description>This command will import all of the data in the SQLite database to QGIS </description> <databasetype>SQLITE</databasetype> <databasehost /> <databaseport /> <databasename>C:\textbackslash Workshop/textbackslash eVis\_Data\textbackslash PhotoPoints.db</databasename> <databaseusername /> <databasepassword /> <sqlstatement>SELECT Attributes.*, Points.x, Points.y FROM Attributes LEFT JOIN Points ON Points.rec_id=Attributes.point_ID</sqlstatement> <autoconnect>false</autoconnect> </query> <query> <shortdescription>Import photograph points "looking across Valley"</shortdescription> <description>This command will import only points that have photographs "looking across
152
a valley" to QGIS</description> <databasetype>SQLITE</databasetype> <databasehost /> <databaseport /> <databasename>C:\Workshop\eVis_Data\PhotoPoints.db</databasename> <databaseusername /> <databasepassword /> <sqlstatement>SELECT Attributes.*, Points.x, Points.y FROM Attributes LEFT JOIN Points ON Points.rec_id=Attributes.point_ID where COMMENTS=Looking across valley</sqlstatement> <autoconnect>false</autoconnect> </query> <query> <shortdescription>Import photograph points that mention "limestone"</shortdescription> <description>This command will import only points that have photographs that mention "limestone" to QGIS</description> <databasetype>SQLITE</databasetype> <databasehost /> <databaseport /> <databasename>C:\Workshop\eVis_Data\PhotoPoints.db</databasename> <databaseusername /> <databasepassword /> <sqlstatement>SELECT Attributes.*, Points.x, Points.y FROM Attributes LEFT JOIN Points ON Points.rec_id=Attributes.point_ID where COMMENTS like %limestone% </sqlstatement> <autoconnect>false</autoconnect> </query> </doc>
153
Icon
Tool Distance Matrix Sum line length Points in polygon List unique values Basic statistic Nearest Neighbor analysis Mean coordinate(s) Line intersections
Analysis tools available via the fTools plugin Purpose Measure distances between two point layers, and output results as a) Square distance matrix, b) Linear distance matrix, or c) Summary of distances. Can limit distances to the k nearest features. Calculate the total sum of line lengths for each polygon of a polygon vector layer. Count the number of points that occur in each polygon of an input polygon vector layer. List all unique values in an input vector layer eld. Compute basic statistics (mean, std dev, N, sum, CV) on an input eld. Compute nearest neighbour statistics to assess the level of clustering in a point vector layer. Compute either the normal or weighted mean center of an entire vector layer, or multiple features based on a unique ID eld. Locate intersections between lines, and output results as a point shapele. Useful for locating road or stream intersections, ignores line intersections with length > 0. Table 12.4.: fTools Analysis tools
Icon
Tool Random selection Random selection within subsets Random points Regular points Vector grid Select by location Polygon from layer extent
Research tools available via the fTools plugin Purpose Randomly select n number of features, or n percentage of features Randomly select features within subsets based on a unique ID eld. Generate pseudo-random points over a given input layer. Generate a regular grid of points over a specied region and export them as a point shapele. Generate a line or polygon grid based on user specied grid spacing. Select features based on their location relative to another layer to form a new selection, or add or subtract from the current selection. Create a single rectangular polygon layer from the extent of an input raster or vector layer. Table 12.5.: fTools Research tools
154
Icon
Tool Convex hull(s) Buffer(s) Intersect Union Symetrical ence Clip Difference Dissolve
Geoprocessing tools available via the fTools plugin Purpose Create minimum convex hull(s) for an input layer, or based on an ID eld. Create buffer(s) around features based on distance, or distance eld. Overlay layers such that output contains areas where both layers intersect. Overlay layers such that output contains intersecting and non-intersecting areas. Overlay layers such that output contains those areas of the input and difference layers that do not intersect. Overlay layers such that output contains areas that intersect the clip layer. Overlay layers such that output contains areas not intersecting the clip layer. Merge features based on input eld. All features with indentical input values are combined to form one single feature. Table 12.6.: fTools Geoprocessing tools
differ-
Icon
Tool Check geometry Export/Add geometry columns Polygon centroids Delaunay triangulation Voronoi Polygons Simplify geometry Multipart to singleparts Singleparts to multipart Polygons to lines Lines to polygons Extract nodes
Geometry tools available via the fTools plugin Purpose Check polygons for intersections, closed-holes, and x node ordering. Add vector layer geometry info to point (XCOORD, YCOORD), line (LENGTH), or polygon (AREA, PERIMETER) layer. Calculate the true centroids for each polygon in an input polygon layer. Calculate and output (as polygons) the delaunay triangulation of an input point vector layer. Calculate voronoi polygons of an input point vector layer. Generalise lines or polygons with a modied Douglas-Peucker algorithm. Convert multipart features to multiple singlepart features. Creates simple polygons and lines. Merge multiple features to a single multipart feature based on a unique ID eld. Convert polygons to lines, multipart polygons to multiple singlepart lines. Convert lines to polygons, multipart lines to multiple singlepart polygons. Extract nodes from line and polygon layers and output them as points. Table 12.7.: fTools Geometry tools
155
Icon
Tool
Data management tools available via the fTools plugin Purpose Project features to new CRS and export as new shapele. Specify the CRS for shapeles whose CRS has not been dened. Join additional attributes to vector layer based on spatial relationship. Attributes from one vector layer are appended to the attribute table of another layer and exported as a shapele Split input layer into multiple separate layers based on input eld. Merge several shapeles within a folder into a new shapele based on the layer type (point, line, area) Table 12.8.: fTools Data management tools
Export to projection Dene projection Join attributes by location Split vector layer Merge shapeles
156
Table 12.9.: List of GDAL tools Build Virtual Raster This program builds a VRT (Virtual Dataset) that is a mosaic of the list of input gdal datasets. This program generates a vector contour le from the input raster elevation model (DEM). This program burns vector geometries (points, lines and polygons) into the raster band(s) of a raster image. Vectors are read from OGR supported vector formats. Note that the vector data must in the same coordinate system as the raster data; on the y reprojection is not provided. This utility creates vector polygons for all connected regions of pixels in the raster sharing a common pixel value. Each polygon is created with an attribute indicating the pixel value of that polygon. The utility will create the output vector datasource if it does not already exist, defaulting to ESRI shapele format. This utility will automatically mosaic a set of images. All the images must be in the same coordinate system and have a matching number of bands, but they may be overlapping, and at different resolutions. In areas of overlap, the last image will be copied over earlier ones. The gdal_sieve.py script removes raster polygons smaller than a provided threshold size (in pixels) and replaces replaces them with the pixel value of the largest neighbour polygon. The result can be written back to the existing raster band, or copied into a new le. The gdal_proximity.py script generates a raster proximity map indicating the distance from the center of each pixel to the center of the nearest pixel identied as a target pixel. Target pixels are those in the source raster for which the raster pixel value is in the set of target pixel values. This utility will scan an image and try to set all pixels that are nearly black (or nearly white) around the edge to exactly black (or white). This is often used to "x up" lossy compressed aerial photos so that color pixels can be treated as transparent when mosaicing.
Contour
Rasterize
Polygonize
Merge
Sieve
Proximity
Near Black
157
Warp
The gdalwarp utility is an image mosaicing, reprojection and warping utility. The program can reproject to any supported projection, and can also apply GCPs stored with the image if the image is "raw" with control information. This program creates regular grid (raster) from the scattered data read from the OGR datasource. Input data will be interpolated to ll grid nodes with values, you can choose from various interpolation methods. The gdal_translate utility can be used to convert raster data between different formats, potentially performing some operations like subsettings, resampling, and rescaling pixels in the process. The gdalinfo program lists various information about a GDAL supported raster dataset. The gdalwarp utility is an image mosaicing, reprojection and warping utility. The program can reproject to any supported projection, and can also apply GCPs stored with the image if the image is "raw" with control information. -s_srs srs def: source spatial reference set. The coordinate systems that can be passed are anything supported by the OGRSpatialReference.SetFromUserInput() call, which includes EPSG PCS and GCSes (ie. EPSG:4296), PROJ.4 declarations (as above), or the name of a .prf le containing well known text. -t_srs srs_def: target spatial reference set. The coordinate systems that can be passed are anything supported by the OGRSpatialReference.SetFromUserInput() call, which includes EPSG PCS and GCSes (ie. EPSG:4296), PROJ.4 declarations (as above), or the name of a .prf le containing well known text. The gdaladdo utility can be used to build or rebuild overview images for most supported le formats with one of several downsampling algorithms. This utility will automatically mosaic a set of images. All the images must be in the same coordinate system and have a matching number of bands, but they may be overlapping, and at different resolutions. In areas of overlap, the last image will be copied over earlier ones. -ul_lr ulx uly lrx lry: The extents of the output le. If not specied the aggregate extents of all input les will be used. This utility will compute an optimal pseudo-color table for a given RGB image using a median cut algorithm on a downsampled RGB histogram. Then it converts the image into a pseudo-colored image using the color table. This conversion utilizes Floyd-Steinberg dithering (error diffusion) to maximize output image visual quality. This utility will convert a pseudocolor band on the input le into an output RGB le of the desired format. This program builds a shapele with a record for each input raster le, an attribute containing the lename, and a polygon geometry outlining the raster. Tools to analyze and visualize DEMs. It can create a shaded relief, a slope, an aspect, a color relief, a Terrain Ruggedness Index, a Topographic Position Index and a roughness map from any GDAL-supported elevation raster.
Grid
Translate
Information
Assign Projection
Build Overviews
Clipper
RGB to PCT
PCT to RGB
Tile Index
158
12.7.3. Examples
12.7.3. Examples
Below are some examples of use of the tools. Getting information about a raster Creating contour lines This example will create contour lines from an SRTM elevation tile. and the result: Using GDALwarp to reproject a raster Heres the dialog window for reprojecting a landcover image, originally in the Albers Equal Area projection for Alaska (from the QGIS sample dataset) into Lon/Lat WGS84 (EPSG:4326).
159
160
12.7.3. Examples
161
Icon
Purpose
Icon
Purpose
Open raster
Start georeferencing
Transformation settings
Add Point
Delete Point
Pan
Zoom in
Zoom out
Zoom to layer
Zoom Last
Zoom Next
Usual procedure As X and Y coordinates (DMS (dd mm ss.ss), DD (dd.dd) or projected coordinates (mmmm.mm) which correspond with the selected point on the image, two alternative procedures can be used: 1. The raster itself sometimes provides crosses with coordinates written on the image. In this case you can enter the coordinates manually. 2. Using already georeferenced layers, this can be either vector or raster data that contain the same objects/features that you have on the image that you want to georeference and the projection you want to have your image. In this case you can enter the coordinates by clicking on the reference dataset loaded in QGIS map canvas. The usual procedure for georeferencing an image involves selecting multiple points on the raster, specifying their coordinates, and choosing a relevant transformation type. Based on the input parameters and data, the plugin will compute the world le parameters. The more coordinates you provide, the better the result will be. The rst step is to start QGIS, load the Georeferencer Plugin (see Section 11.1.1) and click on the Georeferencer icon which appears in the QGIS toolbar menu. The Georeferencer Plugin dialog
162
appears as shown in Figure 12.18. For this example, we are using a topo sheet of South Dakota from SDGS. It can later be visualized together with the data from the GRASS spearsh60 location. You can download the topo sheet here: http://grass. osgeo.org/sampledata/spearfish_toposheet.tar.gz
Entering ground control points (GCPs) 1. To start georeferencing an unreferenced raster, we must load it using the button. The raster will show up in the main working area of the dialog. Once the raster is loaded, we can start to enter reference points. 2. Using the Add Point button, add points to the main working area and enter their coordinates
(See Figure 12.19). For this procedure you have two options: a) Click on a point in the raster image and enter the X and Y coordinates manually b) Click on a point in the raster image and choose the button from map canvas to add the X
and Y coordinates with the help of a georeferenced map already loaded in the QGIS map canvas. c) With the button, you can move the GCPs in both windows, if they are at the wrong place.
3. Continue entering points. You should have at least 4 points, and the more coordinates you can provide, the better the result will be. There are additional tools on the plugin dialog to zoom and pan the working area in order to locate a relevant set of GCP points.
163
12.8. Georeferencer Plugin The points that are added to the map will be stored in a separate text le ([lename].points) usually together with the raster image. This allows us to reopen the Georeferencer plugin at a later date and add new points or delete existing ones to optimize the result. The points le contains values of the form: mapX, mapY, pixelX, Load GCP Points and Save GCP Points buttons to manage the les. pixelY. You can use the Within the GCP table you can click on a column header and therewith enable e.g. numerical sorting. The GCP list is automatically updated. Dening the transformation settings After you have added your GCPs to the raster image, you need to dene the transformation settings for the georeferencing process.
Figure 12.20.: Dening the georeferencer transformation settings Available Transformation algorithms Depending on how many ground control point you have captured, you may want to use different transformation algorithms. Choice of transformation algorithm is also dependent on the type and quality of input data and the amount of geometric distortion that you are willing to introduce to nal result. Currently, following algorithms are available: The Linear algorithm is used to create a world-le, and is different from the other algorithms, as it does not actually transform the raster. This algorithm likely wont be sufcient if you are dealing with scanned material. The Helmert transformation performs simple scaling and rotation transformations. The Polynomial algorithms 1-3 are among the most widely used algorithms for georeferencing, and each one differs by the degree of distortion introduced to match source and destination ground control points. The most widely used polynomial algorithm is the second order polynomial transformation, which allows some curvature. First order polynomial transformation (afne) preserves colliniarity and allows scaling, translation and rotation only. The Thin plate spline (TPS) algorithm is a more modern georeferencing method, which is able to introduce local deformations in the data. This algorithm is useful when very low quality originals are being georeferenced. The Projective transformation is a linear rotation and translation of coordinates. Dene the Resampling method The type of resampling you choose will likely depending on your input data and the ultimate objective of the exercise. If you dont want to change statistics of the image, you might want to choose Nearest neighbour, whereas a Cubic resampling will likely provide a more smoothed result. It is prossible to choose between ve different resampling methods. 1. Nearest neighbour 2. Linear
164
3. Cubic 4. Cubic Spline 5. Lanczos Dene the transformation settings There are several options that need to be dened for the georeferenced output raster. The checkbox Create world le is only available, if you decide to use the linear transformation type, because this means that the raster image actually wont be transformed. In this case, the eld Output raster is not activated, because only a new world-le will be created. For all other transformation type you have to dene an Output raster. As default a new le ([lename]_modied) will be created in the same folder together with the original raster image. As a next step you have to dene the Target SRS (Spatial Reference System) for the georeferenced raster (see section 8). If you like, you can generate a pdf map and also a pdf report. The report ncludes information about the used transformation parameters. An image of the residuals and a list with all GCPs and their RMS errors. Furthermore you can activate the Set Target Resolution checkbox and dene pixel resolution of the output raster. Default horizontal and vertical resolution is 1, The Use 0 for transparency when needed can be activated, if pixels with the value 0 shall be visualized transparent. In our example toposheet all white areas would be transparent. Finally Load in QGIS when done when the transformation is done. Show and adapt raster properties Clicking on the Raster properties dialog in the Settings layer that you want to georeference. Congure the georeferencer You can dene if you want to show GCP coordiniates and/or IDs. As residual units pixels and map units can be chosen. For the PDF report a left and right margin can be dened and you can also set the paper size for the PDF map. Finally you can activate to Running the transformation After all GCPs have been collected and all transformation settings are dened, just press the button georeferencing to create the new georeferenced raster. Start show georeferencer window docked . loads the output raster automatically into the QGIS map canvas
165
12.9. GPS Plugin point layers while routes and tracks are displayed in linestring layers.
2. Browse to the folder qgis_sample_data/gps/, select the GPX le national_monuments.gpx and click Open .
Figure 12.21.: The GPS Tools dialog window Use the browse button . . . to select the GPX le, then use the checkboxes to select the feature types you want to load from that GPX le. Each feature type will be loaded in a separate layer when you click OK . The le national_monuments.gpx only includes waypoints.
12.9.3. GPSBabel
Since QGIS uses GPX les you need a way to convert other GPS le formats to GPX. This can be done for many formats using the free program GPSBabel, which is available at http://www.gpsbabel.org. This program can also transfer GPS data between your computer and a GPS device. QGIS uses GPSBabel to do these things, so it is recommended that you install it. However, if you just want to load GPS data from GPX les you will not need it. Version 1.2.3 of GPSBabel is known to work with QGIS, but you should be able to use later versions without any problems.
166
Figure 12.22.: The download tool The device type you select in the GPS device menu determines how GPSBabel tries to communicate with your GPS device. If none of the available types work with your GPS device you can create a new type (see section 12.9.7). The port may be a le name or some other name that your operating system uses as a reference to the physical port in your computer that the GPS device is connected to. It may also be simply usb, for usb enabled GPS units. COM2. On Linux this is something like /dev/ttyS0 or /dev/ttyS1 and on Windows its COM1 or
When you click OK the data will be downloaded from the device and appear as a layer in QGIS.
167
12.10. Interpolation Plugin %type will be replaced by -w if you are downloading waypoints, -r if you are downloading routes and -t if you are downloading tracks. These are command line options that tell GPSBabel which feature type to download. %in will be replaced by the port name that you choose in the download window and %out will be replaced by the name you choose for the GPX le that the downloaded data should be stored in. So if you create a device type with the download command gpsbabel %type -i garmin -o gpx %in %out (this is actually the download command for the predened device type GPS device: Garmin serial )and then use it to
download waypoints from port /dev/ttyS0 to the le output.gpx, QGIS will replace the keywords and run the command gpsbabel -w -i garmin -o gpx /dev/ttyS0 output.gpx. The upload command is the command that is used to upload data to the device. The same keywords are used, but %in is now replaced by the name of the GPX le for the layer that is being uploaded, and %out is replaced by the port name. You can learn more about GPSBabel and its available command line options at http://www.gpsbabel.org Once you have created a new device type it will appear in the device lists for the download and upload tools.
Number of columns/rows: Specify the number row and colums for the output raster le. Output le: Specify a name for the output raster le.
168
Using the plugin 1. Start QGIS and load an point vector layer (e.g., elevp.csv). 2. Load the Interpolation plugin in the Plugin Manager (see Section 11.1.1) and click on the icon which appears in the QGIS toolbar menu. The Interpolation plugin dialog appears as shown in Figure 12.23. 3. Select an input layer (e.g., elevp 4. Select an interpolation method (e.g. ... ) and column (e.g. ELEV) for interpolation. ... ), and specify a cellsize of Interpolation
Triangular interpolation
5000 as well as the raster output lename (e.g., elevation_tin). 5. Click Ok . 6. For the current example, double click elevation_tin in the layer list to open the Raster Layer Properties dialog and select Pseudocolor ... as Color Map in the Symbology tab. Or you can dene a
new color table as described in Section 5.3. In Figure 12.24 you see the TIN interpolation result with a 998 cols x 812 rows (5 km) resolution for the elevp.csv data visualized using the Pseudocolor color table. The processing only takes a few minutes, and covers the northern part of Alaska.
169
12.11. MapServer Export Plugin before you start using the MapServer Export Plugin, you need to arrange the raster and vector layers you want to use in MapServer and save this status in a QGIS project le.
Figure 12.25.: Arrange raster and vector layers for QGIS project le In this example, we demonstrate the four steps required to create a simple project le which can be used to create the MapServer map le. We use raster and vector les from the QGIS sample dataset 2.2. 1. Add the raster layer landcover.tif clicking on the Add Raster Layer icon.
2. Add the vector Shapeles lakes.shp, majrivers.shp and airports.shp from the QGIS sample dataset clicking on the Add Vector Layer icon.
3. Change the colors and symbolize the data as you like (For example see Figure ??) 4. Save a new project named mapserverproject.qgs using File Save Project .
170
Map Height Height of the output image in pixels. Map Units Units of measure used for output Image type Format for the output image generated by MapServer Web Template Full path to the MapServer template le to be used with the map le Web Header Full path to the MapServer header le to be used with the map le Web Footer Full path to the MapServer footer le to be used with the map le Only the Map file and QGIS project file inputs are required to create a map le, however by omitting the other parameters, you may end up creating a non-functional map le, depending on your intended use. Although QGIS is good at creating a map le from your project le, it may require some tweaking to get the results you want. For this example, we will create a map le using the project le mapserverproject.qgs we just created (see Figure 12.26): 1. Start the MapServer dialog (see Figure 12.26) by clicking the toolbar menu. 2. Enter the name (e.g., qgisproject.map) for your new map le. 3. Browse and nd the QGIS project le (e.g., mapserverproject.qgs) you previously saved. 4. Enter a name (e.g., MyMap) for the map. 5. Enter the width and height (e.g., 600 for the width and 400 for the height) for your output image. 6. For this example, the layers are in meters, so we change the units to meters. 7. Choose png for the image type. 8. Click OK to generate the new map le qgisproject.map. QGIS displays the success of your efforts. You can view the map le in any text editor or visualizer. If you take a look, youll notice that the export tool adds the metadata needed to enable our map le for WMS. MapServer Export icon in the
171
Figure 12.27.: Test PNG created by shp2img with all MapServer Export layers If you plan to use the map le to serve WMS requests, you probably dont have to tweak anything. If you plan to use it with a mapping template or a custom interface, you may have a bit of manual work to do. To see how easy it is to go from QGIS to serving maps on the web, take a look at Christopher Schmidts 5 minute ash video. He used an older version of QGIS (version 0.8), but the demo applies equally well to newer versions. 2
(usually PostGIS or WFS-T) to a spatialite database and storing the ofine edits to dedicated tables. After being connected to the network again, it is possible to apply the ofine edits to the master dataset. Using the plugin
Open some vector layers, e.g. from a PostGIS or WFS-T datasource Save it as a project Press the Convert to ofine project button and select the layers to save. The content of the layers is saved to spatialite tables. Edit the layers ofine. After being connected again, upload the changes with the Synchronize button.
2 http://openlayers.org/presentations/mappingyourdata/
172
cle Spatial GeoRaster dialog window. Click on New to open the dialog window, and specify the connection parameters (See Figure 12.29): Name: Enter a name for the database connection. Database instance: Enter the name of the database that you will connect to. Username: Specify your own username that you will use to access the database. Password: The password associated with your username that is required to access the database. Now, back on the main Oracle Spatial GeoRaster dialog window (See Figure 12.30), use the drop-down list to choose one connection, and use the Connect button to establish a connection. You may also Edit the connection by opening the previous dialog and making changes to the connection information, or use the Delete button to remove the connection from the drop-down list.
173
174
12.13.3. Displaying GeoRaster The Selection data entry can also be used to enter a Where clause at the end of the identication string, e.g., geor:scott/tiger@orcl,gdal_import,raster,geoid=. See http://www.gdal.org/frmt_georaster.html for more information.
175
OSM data primitive is an object class that can be stored via the API in the server. The three supported types of data are: Node, Way and Relation. A node is a latitude/longitude pair of coordinates. It is used as building a block for other features and as a feature itself (Points Of Interest), if they are tagged as required. A way is a list of at least two nodes that describe a linear feature such as a street, or similar. Nodes can be members of multiple ways. A relation is a group of zero or more primitives with associated roles. It is used to specify relationships between objects, and may also model an abstract object. Several different logical features in a common map (Point Of Interest, Street, Tram Line, Bus Stop etc.) are dened by these primitives. Map features are well-known in the OSM community and are stored as tags, based on a key and a value. OSM is usually distributed in XML format. XML payload is used for the communication with the OSM server as well. QGIS - OSM Connection The rst part of this section describes how OSM data primitives are displayed in QGIS vector layers. As previously mentioned, OSM data consists of Nodes, Ways and Relations. In QGIS, they are displayed in three different layer types: Point layer, Line layer and Polygon layer. It is not possible to remove any of these layers and work with the other ones. A Point layer displays all features of type Node that stands alone. That means that only Nodes that are not included in any Way belongs to the Point layer. A Line layer displays those OSM features of type Way that are not closed. That means, none of these Ways starts and ends with the same Node. A Polygon layer displays all Ways that are not included in Line layer. OpenStreetMap has one more data primitive in addition to the three mentioned above. This is called Relation. There is purposely no vector layer to display Relations. A Relation denes a connection between any number of data primitives. After a Point, Line or Polygon is identied on a map, the plugin shows a list of all relations which the identied feature is part of. It was challenging to design the connection between OSM data and the standard QGIS editing tools. These tools are made to edit a single vector layer at a time, no matter of what feature types it displays. This means that if OSM data are loaded to QGIS through the plugin, you could (theoretically) edit the Point layer, Line layer or Polygon layer with these standard tools separately. A Line layer consists of two different types of OSM features, Ways and Nodes. In OSM format, a Way is composed of Nodes. If you start editing a Line layer and change the shape of some line, your action affects not only the OSM Way, but also the OSM Nodes that are part of it.
176
12.14.1. Installation QGIS standard editing tools cannot tell the OSM provider, which members of which line has changed and how. It can tell only whats the new geometry of which line, and thats not enough to propagate changes to the OSM database correctly. The Line layer does also not know the identiers of the line members. The same problem occurs when you try to edit the Polygon layer. For this reason, the OSM plugin need its own tools for editing OSM data. While they are used, the OSM layers can be changed correctly. The Plugin editing tools consists of tools for Point, Line, Polygon and Relation creation, deletion and moving. Note: To create a connection between the OSM plugin and standard editing tools, changes in QuantumGIS core code would be necessary.
12.14.1. Installation
The OpenStreetMap plugin is a core plugin inside QGIS. If you have python support enabled, the OpenStreetMap plugin can be selected in the Plugin Manager as described in section 11.1.1).
OSM Features widget The OSM Feature widget helps to identify OSM features. It shows basic information on the feature type and identier as well as information on who has changed a feature, and when. The OSM Feature widget also provides all editing tools (in the top part of it). More information on those tools can be found in the sections below. The widget is initially disabled. It activates itself after successful loading some OSM data. OSM Undo/Redo widget This Undo/Redo widget is used to undo and redo edit actions. It consists not only a classic Undo and Redo button, but also shows a list with a brief description of the edit actions that were done. The OSM Undo/Redo widget is initially closed. You can show it using a button on the OSM Feature widget. Toolbar menu icons Load OSM from le : is used to load data from a special OpenStreetMap XML le. Show/Hide OSM Feature Manager is used to show or hide the OSM Feature widget. The OSM
Feature widget is a panel that helps with OSM feature identication and with OSM data editing.
177
Download OSM data is used to download data from the OpenStreetMap server. Upload OSM data is used to upload changes (on current data). Import data from a layer is used to import data from a vector layer. At least one vector layer must be loaded and current OSM data must be selected. Save OSM to le is used to save OSM data back to an XML le. More detailed information on all the widgets, buttons and dialogs can be found in appropriate sections of this plugin section according to their functionality (editing, identication, etc.).
disabled OpenStreetMap toolbar in your QGIS installation. You can enable it again selecting Settings Toolbars OpenStreetMap
Figure 12.33.: Load OSM data dialog The purpose of its elements is explained below. OpenStreetMap le to load: Click on the button to select the .osm le you want to load data from. Add columns for tags: This option determines a connection between OSM and QGIS data. Each feature of OSM data has some tags (pairs of key and value), that dene the feature properties. Each feature of a QGIS vector layer also has its attributes (key and value). With this option you can dene which properties of OSM objects should be visible when displaying detailed information about QGIS features. Replace current data: Checking this option means that new data should replace current data the user is working with. Layers of current data will be removed and new ones will be loaded. When loading OSM data for the rst time, this option is not active, because there is nothing to replace. Use custom renderer: This option determines how many details of the map will be used. There are three pre-dened OSM styles for map displaying. Use Small scale if you want to view OSM data at low level, to see all details and to edit something. If not you can use Medium scale or Large scale . QGIS 1.7.0 doesnt support changing the renderer style dynamically. Click Ok to load your data. If this is the rst time the OSM le is loaded, the plugin must rst parse the
178
12.14.4. Viewing OSM data database. This may take few seconds or minutes - it depends on the amount of loaded data.
button on the top-left of the OSM Feature widget. Using this tool you can easily
explore all map objects. When the mouse cursor is placed over an object, you can see all information on it directly in the OSM Feature widget. There is also a dynamic rubberband displayed on the map so that the user is able to determine which feature is currently identied. The Properties tab of the widget contains of all feature tags. Clicking on the Relation tab shows you a list of all relations connected with identied feature. If you want to hold a feature for a while to be able to read its properties and relations, move the mouse cursor at the same time, try left-clicking while you are over the feature. Identication process will stop until next left-clicking. Sometimes there is more than one feature at a point where left-clicking was performed. This happens especially when clicking on cross-roads or if you did not zoom enough into the map. In this situation only one of such features is identied (and marked with the rubberband) but the plugin remembers all of them. Then (still in the pause mode) you can cycle through the identied features by right-clicking.
Figure 12.34.: Changing an OSM feature tag If you want to change a tag value, just double-click in the appropriate row of column Value and type, or select
179
12.14. OpenStreetMap Plugin a new value. If you want to remove a tag, click in the relevant row, then use the button Remove selected tags on the right bottom under the table. To add new tags just type the key and value into the last row of the table where <next tag value> is written. Notice that you cannot change the key of an existing tag pair. Conveniently, there are some combo boxes of all existing tag keys and their typical values. Point creation For point creation there is a Create point button on the OSM Feature widget. To create some points,
just click on the button and start clicking on the map. If your cursor is over some map feature, the feature is marked/identied immediately. If you click on the map when a line or polygon is marked, a new point is created directly on such line or polygon as its new member. If your cursor is over an existing point, a new point cannot be created. In such case the OSM plugin will show following message:
Figure 12.35.: OSM point creation message The mechanism of helping a user to hit the line or polygon is called snapping and is enabled by default. If you want to create a point very close to some line (but not on it) you must disable snapping by holding the Ctrl key rst. Line creation For line creation, there is a Create line button on the OSM Feature widget. To create a line just click
the button and start left-clicking on the map. Each of your left-clicks is remembered as a vertex of the new line. Line creation ends when the rst right-click is performed. The new line will immediately appear on the map. Note: A Line with less than two members cannot be created. In such case the operation is ignored. Snapping is performed to all map vertices - points from the Point vector layer and all Line and Polygon members. Snapping can be disabled by holding the Ctrl key. Polygon creation For polygon creation there is a Create polygon button on the OSM Feature widget. To create a
polygon just click the button and start left-clicking on the map. Each of your left-clicks is remembered as a member vertex of the new polygon. The Polygon creation ends when rst right-click is performed. The new polygon will immediately appear on the map. Polygon with less than three members cannot be created. In such case operation is ignored. Snapping is performed to all map vertexes - points (from Point vector layer) and all Line and Polygon members. Snapping can be disabled by holding the Ctrl key. Map feature moving If you want to move a feature (no matter what type) please use the Move feature button from the OSM
Feature widget menu. Then you can browse the map (features are identied dynamically when you go over them) and click on the feature you want to move. If a wrong feature is selected after your click, dont move it from the place. Repeat right-clicking until the correct feature is identied. When selection is done and you move the cursor, you are no more able to change your decision what to move. To conrm the move, click on the left mouse button. To cancel a move, click another mouse button. If you are moving a feature that is connected to another features, these connections wont be damaged. Other features will just adapt themselves to a new position of a moved feature. Snapping is also supported in this operation, this means:
180
12.14.6. Editing relations When moving a standalone (not part of any line/polygon) point, snapping to all map segments and vertices is performed. When moving a point that is a member of some lines/polygons, snapping to all map segments and vertices is performed, except for vertices of point parents. When moving a line/polygon, snapping to all map vertices is performed. Note that the OSM Plugin tries to snap only to the 3 closest-to-cursor vertices of a moved line/polygon, otherwise the operation would by very slow. Snapping can be disabled by holding Ctrl key during the operation. Map feature removing If you want to remove a feature, you must identify it rst. Remove this feature To remove an identied feature, use the When removing a line/polygon, the button on the OSM Feature widget.
line/polygon itself is deleted, so are all its member points that doesnt belong to any other line/polygon. When removing a point that is member of some lines/polygons, the point is deleted and the geometries of parent lines/polygons are changed. The new parent geometry has less vertices than the old one. If the parent feature was a polygon with three vertexes, its new geometry has only two vertexes. And because there cannot exist polygon with only two vertices, as described above, the feature type is automatically changed to Line. If the parent feature was a line with two vertexes, its new geometry has only one vertex. And because there cannot exist a line with only one vertex, the feature type is automatically changed to Point.
2. You can create it from the Relation tab of OSM Feature widget using the
In both cases a dialog will appear. For the second case, the feature that is currently identied is automatically considered to be the rst relation member, so the dialog is prelled a little. When creating a relation, please select its type rst. You can select one of predened relation types or write your own type. After that ll the relation tags and choose its members. If you have already selected a relation type, try using the Generate tags button. It will generate typical identify tool and clicking on
tags to your relation type. Then you are expected to enter values to the keys. Choosing relation members can be done either by writing member identiers, types and roles or using the map.
Finally when type, tags and members are chosen, the dialog can be submitted. In such case the plugin creates a new relation for you.
181
12.14. OpenStreetMap Plugin Changing relation If you want to change an existing relation, identify it rst (follow steps written above in Section Examining relation). After that click on the Edit relation button. You will nd it on the OSM Feature widget. A new dialog appears, nearly the same as for the create relation action. The dialog is pre-lled with information on given relations. You can change relation tags, members or even its type. After submitting the dialog your changes will be committed.
such button, the OSM toolbar may be disabled in your QGIS instalation. You can enable it again at Settings Toolbars functionalities: OpenStreetMap
Figure 12.36.: OSM download dialog Extent: Species an area to download data from intervals of latitude and longitude degrees. Because there is some restriction of OpenStreetMap server on how much data can be downloaded, the intervals must not be too wide. More detailed info on extent specication can is shown after clicking the button on the right. Download to: Here you are expected to write a path to the le where data will be stored. If you cant remember the structure of your disk, dont panic. The browse button will help you. Open data automatically after download: Determines, if the download process should be followed by loading the data process or not. If you prefer not to load data now, you can do it later by using the Load OSM from le button. Replace current data: This option is active only if Open data automatically after download is help
checked. Checking this option means that downloaded data should replace current data we are working with now. Layers of the current data will be removed and new ones will be loaded. When starting QGIS and downloading OSM data for the rst time, this option is initially inactive, because there is nothing to replace. Use custom renderer: This option is active only if the Open data automatically after download
checkbox is checked. It determines how many details will be in the map. There are three predened OSM styles for map displaying. Use Small scale if you want to view OSM data at low level, to see all details and to edit something. If not you can use Medium scale not support changing the renderer style dynamically. Click the Download button to start the download process. or Large scale . QGIS 1.7.0 does
182
12.14.8. Uploading OSM data A progress dialog will continuously inform you about how much of data is already downloaded. When an error occurs during the download process, a dialog tells you why. When action nishes successfully both the progress dialog and download dialog will close themselves.
button, OSM toolbar in your QGIS installation is disabled. You can enable it again in Settings OpenStreetMap
Figure 12.37.: OSM upload dialog At the top of the dialog you can check, if you are uploading the correct data. There is a short name of a current database. In the table you nd information on how many changes will be uploaded. Statistics are displayed separately for each feature type. In the Comment on your changes box you can write brief information on meaning of your upload operation. Just write in brief what data changes youve done or let the box empty. Fill OSM account arrays so that the server could authenticate you. If you dont have an account on the OSM server, its the best time to create one at http://www.openstreetmap.org. Finally use Upload to start an upload operation.
is no such button, the OSM toolbar in your QuantumGIS installation is probably disabled. You can enable it OpenStreetMap I . After clicking on the button a new dialog again in Settings Toolbars appears.
183
Figure 12.38.: OSM saving dialog Select features you want to save into XML le and the le itself. Use the Ok button to start the operation. The process will create an XML le, in which OSM data from your current map extent are represented. The OSM version of the output le is 0.6. Elements of OSM data (<node>, <way>, <relation>) do not contain information on their changesets and uids. This information are not compulsory yet, see DTD for OSM XML version 0.6. In the output le OSM elements are not ordered. Notice that not only data from the current extent are saved. Into the output le the whole polygons and lines are saved even if only a small part of them is visible in the current extent. For each saved line/polygon all its member nodes are saved too.
Figure 12.39.: OSM import message dialog In such case there is no vector layer currently loaded. The import must be d one from a loaded layer - please load a vector layer from which you want to import data. After a layer is opened, your second try should give you a better result (dont forget to mark the current OSM layer again): Use the submit dialog to start the process of OSM data importing. Reject it if you are not sure you want to import something.
184
Figure 12.41.: Raster Terrain Modelling Plugin Using the plugin 1. Start QGIS and load a DEM raster layer.
185
12.16. Road Graph Plugin 2. Load the Raster Terrain Modelling plugin in the Plugin Manager (see Section 11.1.1) and click on the Raster Terrain Modelling icon which appears in the QGIS toolbar menu. The Raster Terrain Modelling plugin dialog appears as shown in Figure 12.41. 3. Select an analysis method (e.g. Slope
).
points on any polyline layer and plots this path over the road network. Main features:
calculate path, its length and travel time optimize by length or by travel time export path to a vector layer highlight roads directions (this is slow and used mainly for debug purposes and for the settings testing)
As a roads layer you can use any polyline vector layer in any QGIS supported format. Two lines with a common point are considered connected. Please note, it is required to use layer CRS as project CRS while editing roads layer. This is due to the fact that recalculation of the coordinates between different CRS introduce some errors that can result in discontinuities, even when snapping is used. In the layer attribute table the following elds can be used:
speed on road section numeric eld; direction any type, that can be casted to string. Forward and reverse directions are correspond to the
one-way road, both directions two-way road.
If some elds dont have any value or do not exists default values are used. You can change defaults and some plugin settings in plugin settings dialog. Usage After plugin activation you will see additional panel on the left side of the main QGIS window. Now make some Road Graph I . denitions to the road graph plugin settings dialog in the menu Plugins
Figure 12.42.: Dene settings for the road graph plugin Select a Start and a Stop point in the road network layer and click on calculate .
186
ence to another layer. The functionality is based on the GEOS library and depends on the selected source feature layer. Possible operator are: Crosses Intersects Is disjoint Touches Within Polygon layers do not provide the Touches and Crosses operator. How to use the plugin As an example we want to nd regions in the Alaska dataset that contain airports. Following steps are necessary: 1. Start QGIS and load the vector layers regions.shp and airports.shp. 2. Load the Spatial Query plugin in the Plugin Manager (see Section 11.1.1) and click on the Spatial Query shown in Figure 12.44. 3. Select layer regions as source layer and airports as reference feature layer. 4. Select Contains as operator and click Apply . Now you get a list of feature IDs from the query and you have several options. Click on the Create layer with list of items icon which appears in the QGIS toolbar menu. The plugin dialog appears as
187
Select the Remove from current selection in the eld And use the result to. Additionally you can Zoom to item or display Log messages .
gin allows to connect to this SQL Anywhere. The Add SQL Anywhere layer dialog is similar in functionality to the dialogs for PostGIS and SpatiaLite.
188
189
191
13.5. Wiki qgis-edu This list deals with QGIS education efforts. If you like to work on qgis education materials, this list is a good starting point to ask your questions. You can subscribe to this list at: http://lists.osgeo.org/mailman/listinfo/qgis-edu qgis-psc This list is used to discuss Steering Committee issues related to overall management and direction of Quantum GIS. You can subscribe to this list at: http://lists.osgeo.org/mailman/listinfo/qgis-psc You are welcome to subscribe to any of the lists. Please remember to contribute to the list by answering questions and sharing your experiences. Note that the qgis-commit and qgis-trac are designed for notication only and not meant for user postings.
13.2. IRC
We also maintain a presence on IRC - visit us by joining the #qgis channel on irc.freenode.net. Please wait around for a response to your question as many folks on the channel are doing other things and it may take a while for them to notice your question. Commercial support for QGIS is also available. Check the website http://qgis.org/en/commercial-support.html for more information. If you missed a discussion on IRC, not a problem! We log all discussion so you can easily catch up. Just go to http://logs.qgis.org and read the IRC-logs.
13.3. BugTracker
While the qgis-users mailing list is useful for general how do I do xyz in QGIS type questions, you may wish to notify us about bugs in QGIS. You can submit bug reports using the QGIS bug tracker at http: //hub.qgis.org/projects/quantum-gis/issues. When creating a new ticket for a bug, please provide an email address where we can request additional information. Please bear in mind that your bug may not always enjoy the priority you might hope for (depending on its severity). Some bugs may require signicant developer effort to remedy and the manpower is not always available for this. Feature requests can be submitted as well using the same ticket system as for bugs. Please make sure to select the type enhancement. If you have found a bug and xed it yourself you can submit this patch also. Again, the lovely trac ticketsystem at http://hub.qgis.org/projects/quantum-gis/issues has this type as well. Select patch from the typemenu. Someone of the developers will review it and apply it to QGIS. Please dont be alarmed if your patch is not applied straight away - developers may be tied up with other committments.
13.4. Blog
The QGIS-community also runs a weblog at http://www.qgis.org/planet which has some interesting articles for users and developers as well provided by other blogs in the community. You are invited to contribute your own QGIS blog!
13.5. Wiki
Lastly, we maintain a WIKI web site at http://www.qgis.org/wiki where you can nd a variety of useful information relating to QGIS development, release plans, links to download sites, message translation-hints and so on. Check it out, there are some goodies inside!
192
193
13.5. Wiki
a) You must cause the modied les to carry prominent notices stating that you changed the les and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modied program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modied work as a whole. If identiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface denition les, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and
194
this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program species a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
195
Preamble
The purpose of this License is to make a manual, textbook, or other functional and useful document free in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modications made by others. This License is a kind of copyleft, which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software. We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference.
197
A.1. Quantum GIS Qt exception for GPL A Transparent copy of the Document means a machine-readable copy, represented in a format whose specication is available to the general public, that is suitable for revising the document straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent le format whose markup, or absence of markup, has been arranged to thwart or discourage subsequent modication by readers is not Transparent. An image format is not Transparent if used for any substantial amount of text. A copy that is not Transparent is called Opaque. Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML, PostScript or PDF designed for human modication. Examples of transparent image formats include PNG, XCF and JPG. Opaque formats include proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML, PostScript or PDF produced by some word processors for output purposes only. The Title Page means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, Title Page means the text near the most prominent appearance of the works title, preceding the beginning of the body of the text. The publisher means any person or entity that distributes copies of the Document to the public. A section Entitled XYZ means a named subunit of the Document whose title either is precisely XYZ or contains XYZ in parentheses following text that translates XYZ in another language. (Here XYZ stands for a specic section name mentioned below, such as Acknowledgements, Dedications, Endorsements, or History.) To Preserve the Title of such a section when you modify the Document means that it remains a section Entitled XYZ according to this denition. The Document may include Warranty Disclaimers next to the notice which states that this License applies to the Document. These Warranty Disclaimers are considered to be included by reference in this License, but only as regards disclaiming warranties: any other implication that these Warranty Disclaimers may have is void and has no effect on the meaning of this License.
2. VERBATIM COPYING
You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3. You may also lend copies, under the same conditions stated above, and you may publicly display copies.
3. COPYING IN QUANTITY
If you publish printed copies (or copies in media that commonly have printed covers) of the Document, numbering more than 100, and the Documents license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and BackCover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects. If the required texts for either cover are too voluminous to t legibly, you should put the rst ones listed (as many as t reasonably) on the actual cover, and continue the rest onto adjacent pages. If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a
198
computer-network location from which the general network-using public has access to download using publicstandard network protocols a complete Transparent copy of the Document, free of added material. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public. It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document.
4. MODIFICATIONS
You may copy and distribute a Modied Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modied Version under precisely this License, with the Modied Version lling the role of the Document, thus licensing distribution and modication of the Modied Version to whoever possesses a copy of it. In addition, you must do these things in the Modied Version: A. Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of previous versions (which should, if there were any, be listed in the History section of the Document). You may use the same title as a previous version if the original publisher of that version gives permission. B. List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modications in the Modied Version, together with at least ve of the principal authors of the Document (all of its principal authors, if it has fewer than ve), unless they release you from this requirement. C. State on the Title page the name of the publisher of the Modied Version, as the publisher. D. Preserve all the copyright notices of the Document. E. Add an appropriate copyright notice for your modications adjacent to the other copyright notices. F. Include, immediately after the copyright notices, a license notice giving the public permission to use the Modied Version under the terms of this License, in the form shown in the Addendum below. G. Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Documents license notice. H. Include an unaltered copy of this License. I. Preserve the section Entitled History, Preserve its Title, and add to it an item stating at least the title, year, new authors, and publisher of the Modied Version as given on the Title Page. If there is no section Entitled History in the Document, create one stating the title, year, authors, and publisher of the Document as given on its Title Page, then add an item describing the Modied Version as stated in the previous sentence. J. Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the History section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission. K. For any section Entitled Acknowledgements or Dedications, Preserve the Title of the section, and preserve in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given therein. L. Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles. M. Delete any section Entitled Endorsements. Such a section may not be included in the Modied Version. N. Do not retitle any existing section to be Entitled Endorsements or to conict in title with any Invariant Section. O. Preserve any Warranty Disclaimers. If the Modied Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modied Versions license notice. These titles must be distinct from any other section titles.
199
A.1. Quantum GIS Qt exception for GPL You may add a section Entitled Endorsements, provided it contains nothing but endorsements of your Modied Version by various partiesfor example, statements of peer review or that the text has been approved by an organization as the authoritative denition of a standard. You may add a passage of up to ve words as a Front-Cover Text, and a passage of up to 25 words as a BackCover Text, to the end of the list of Cover Texts in the Modied Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one. The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modied Version.
5. COMBINING DOCUMENTS
You may combine the Document with other documents released under this License, under the terms dened in section 4 above for modied versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodied, and list them all as Invariant Sections of your combined work in its license notice, and that you preserve all their Warranty Disclaimers. The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work. In the combination, you must combine any sections Entitled History in the various original documents, forming one section Entitled History; likewise combine any sections Entitled Acknowledgements, and any sections Entitled Dedications. You must delete all sections Entitled Endorsements.
6. COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects. You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document.
8. TRANSLATION
Translation is considered a kind of modication, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original
200
versions of these Invariant Sections. You may include a translation of this License, and all the license notices in the Document, and any Warranty Disclaimers, provided that you also include the original English version of this License and the original versions of those notices and disclaimers. In case of a disagreement between the translation and the original version of this License or a notice or disclaimer, the original version will prevail. If a section in the Document is Entitled Acknowledgements, Dedications, or History, the requirement (section 4) to Preserve its Title (section 1) will typically require changing the actual title.
9. TERMINATION
You may not copy, modify, sublicense, or distribute the Document except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, or distribute it is void, and will automatically terminate your rights under this License. However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and nally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder noties you of the violation by some reasonable means, this is the rst time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, receipt of a copy of some or all of the same material does not give you any rights to use it.
11. RELICENSING
Massive Multiauthor Collaboration Site (or MMC Site) means any World Wide Web server that publishes copyrightable works and also provides prominent facilities for anybody to edit those works. A public wiki that anybody can edit is an example of such a server. A Massive Multiauthor Collaboration (or MMC) contained in the site means any set of copyrightable works thus published on the MMC site. CC-BY-SA means the Creative Commons Attribution-Share Alike 3.0 license published by Creative Commons Corporation, a not-for-prot corporation with a principal place of business in San Francisco, California, as well as future copyleft versions of that license published by that same organization. Incorporate means to publish or republish a Document, in whole or in part, as part of another Document. An MMC is eligible for relicensing if it is licensed under this License, and if all works that were rst published under this License somewhere other than this MMC, and subsequently incorporated in whole or in part into the MMC, (1) had no cover texts or invariant sections, and (2) were thus incorporated prior to November 1, 2008. The operator of an MMC Site may republish an MMC contained in the site under CC-BY-SA on the same site at any time before August 1, 2009, provided the MMC is eligible for relicensing.
201
202
Index
%%, 59 Actions, 58 actions dening, 59 examples, 59 using, 59 advanced digitizing an existing layer, 68 Allow Editing, 65 Analysis tools, 154 annotations, 31 Arc/Info ASCII Grid, 79 Arc/Info Binary Grid, 79 Attributes, 56 bookmarks, 33 command line options, 15 Context help, 24 coordinate reference system, 87 crashes, 134 CRS, 87 data sample, 11 Data management tools, 156 data providers, 136 digitizing an existing layer, 65 documentation, 1 editing, 62 copying features, 67 creating a new shapele layer, 71 creating a new shape layer, 71 creating a new spatialite layer, 72 cutting features, 67 icons, 65 pasting features, 67 save selection as new layer, 74 saving changes, 68 working with non spatial tables, 74 working with the attribute table, 73 Erdas Img., 79 ESPG, 97 ESRI shapeles, 37 Field Calculator getting all values, 77 eld calculator OGR, 76 PostGIS, 76 PostgreSQL, 76 Field Calcultor generating sample list, 77 form annotation, seeannotations31 GDAL, 97 Geometry tools, 155 Geoprocessing tools, 155 Georeferencer tools, 162 GeoTIFF, 79 GRASS, 101 attribute linkage, 105 attribute storage, 105 category settings, 106 digitizing, 105 digitizing tools, 106, 107 display results, 112, 113 edit permissions, 110 loading data, 101 region, 108 display, 108 editing, 108 snapping tolerance, 107 starting QGIS, 101 symbology settings, 107 table editing, 107 toolbox, 108, 109, 112, 114 Browser, 116 customize, 117 grapical modules, 109 topology, 105 vector data model, 105 identify WMS, 89 IGNF, 97 installation, 11 Keyboard shortcuts, 23 layer visibility, 21 layers initial visibility, 25
203
Index layout toolbars, 21 legend, 21 license exception, 195 FDL, 197 GPL, 193 main window, 16 map overview, 23 view, 22 MapInfo MIF les, 37 TAB les, 37 measure, 25 measure:angles, 26 measure:areas, 26 measure:line length, 26 menus, 17 Metadata, 58 MIF les, 37 New labeling, 54 OGC Authentication, 90 coordinate reference system, 87 CRS, 87 introduction, 85 search, 88 WMS client, 85 WMS1.3.0, 90 OGR, 37 eld calculator, 76 pan arrow keys, 23 plugin georeferencer, 137 grass toolbox, 137 plugins, 133 coordinate capture, 137 copyright, 137 core, 137 delimited text, 137 diagram, 137 DXF2Shape, 137 evis, 147, 152 ftools, 137 gdaltools, 137 georaster, 137 gps, 137 installing, 134 Interpolation, 137 manager, 133 managing, 133 MapServer Export, 137 north arrow, 137 Plugin Installer, 138 point displacement, 137 Python Plugin Installer, 134 Raster Terrain Modelling, 138 road graph, 138 scalebar, 138 spit, 138 SQL anywhere, 138 types, 133 upgrading, 134 plugins settings, 141 PostGIS Exporting, 42 eld calculator, 76 layers, 39 spatial index, 43 GiST, 43 SPIT, 42 editing eld names, 43 importing data, 42 loading, 42 reserved words, 43 PostgreSQL connection, 40 testing, 40 connection manager, 40 connection parameters, 41 database, 41 eld calculator, 76 host, 41 layer details, 42 loading layers, 41 password, 41 port, 41 sslmode, 41 username, 41 Print composer tools, 119 Projections coordinate reference system, 87 CRS, 87 custom, 100 enabling, 99 specifying, 97 SRS, 87 WMS, 87 working with, 97 projects, 26 Query Builder, 74 changing layer denitions, 75 generating sample list, 75 getting all values, 75 save selection as new layer, 76 Raster raster analysis, 84 raster calculator, 83
204
Index Raster analysis, 84 Raster calculator, 83 raster layer classify, 82 raster layers, 79 context menu, 80 denition, 79 georeferenced, 79 histogram, 83 loading, 79 metadata, 83 properties, 82 pyramids, 83 resolution pyramids, 83 standard deviation, 81 statistics, 83 supported channels, 80 transparency, 81 rasters metadata, 89 properties, 89 WMS, 85 rendering, 24 options, 25 quality, 25 scale dependent, 24 suspending, 25 update during drawing, 25 Research tools, 154 scale, 24 calculate, 23 security, 41 settings, 41 shapele format, 37 loading, 37 specication, 37 shapeles, 37 SHP les, 37 spatial bookmarks, seebookmarks33 spatial index shapeles, 38 SpatiaLite Data management, 45 layers, 45 SpatiaLite layers properties dialog, 45 SRS, 87 symbology changing, 51 TAB les, 37 text annotation, seeannotations31 Toggle Editing, 65 toolbars, 21 vector layers, 37 add part, 70 ring, 69 adding feature, 65 advanced digitizing, 68 advanced editing tools, 69 ArcInfo Binary Coverage, 39 basic editing tools, 65 copy feature, 67 crossing, 44 cut feature, 67 delete part, 70 ring, 70 deleting feature, 68 diagram, 61 digitizing, 65 ESRI shapeles, 37 joins, 61 MapInfo, 39 merge attributes of features, 70 features, 70 move feature, 65 node tool, 66 Node Tool, 67 old symbology, 50 paste feature, 67 PostGIS, see PostGIS properties dialog, 45 redo, 68 renderers continuous color, 50 graduated symbol, 50 single symbol, 50 unique value, 50 reshape feature, 70 rotate symbol, 70 simplify, 69 SpatlaLIte, see SpatiaLite split feature, 70 styles, 51 symbology, 45 transparency, 51 undo, 68 WFS
205
Index remote server, 92 Transactional, 90 WFS-T, 90 WKT, 97 WMS authentication, 86 capabilites, 89 client, 85 about, 85 connection parameters, 86 layers, 86 limits, 90 coordinate reference system, 87 CRS, 87 GetFeatureInfo, 89 identify, 89 image encoding, 87 layerorder, 89 layer settings editing, 90 layer transparency, 88 metadata, 89 properties, 89 QGISmapserver, 90 QGIS Server, 93 remote server authentication, 90 basic authentication, 90 layer ordering, 87 selection, 85 URL, 86 search, 88 secured layers, 90 serversearch, 88 tileset, 89 URL, 86 WMS-C, 89 zoom mouse wheel, 23
206
M ITASOVA , H. Open source gis: A grass gis approach, 2008. http:// http://
[5] OGR-S OFTWARE -S UITE. Geospatial data abstraction library. http://www.gdal.org/ogr, 2011. [6] O PEN -G EOSPATIAL -C ONSORTIUM. Web map service (1.1.1) implementation specication. portal.opengeospatial.org, 2002. [7] O PEN -G EOSPATIAL -C ONSORTIUM. Web map service (1.3.0) implementation specication. portal.opengeospatial.org, 2004. [8] P OST GIS-P ROJECT. Spatial support for postgresql. http://postgis.refractions.net/, 2011.
207