Scribd
Upload
139 views

Tricast Sales Data Sheet en

Tricast range of dry type cast resin transformers complies with all your distribution transformer requirements. Self-extinguishing, it provides an effective solution for use in industrial installations susceptible to fire hazards. With ratings up to 25MVA and 52 kV, 50 / 60 Hz, it offers an cooling for continuous indoor service and normal or reduced losses.

Uploaded by

Duy Nguyen
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
139 views

Tricast Sales Data Sheet en

Tricast range of dry type cast resin transformers complies with all your distribution transformer requirements. Self-extinguishing, it provides an effective solution for use in industrial installations susceptible to fire hazards. With ratings up to 25MVA and 52 kV, 50 / 60 Hz, it offers an cooling for continuous indoor service and normal or reduced losses.

Uploaded by

Duy Nguyen
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Tricast

Cast resin dry type transformer up to 25 MVA - 52 kV

PM102297

01

Tricast Key transformer features

Around the world, customers are demanding eco-friendly solutions for their transmission networks that are not only safe for their personnel but that are also safe for the environment. With todays focus on improving environmental impact and preserving the earths natural resources, Schneider Electrics contribution is to manufacture safe and environmentally friendly equipment : Tricast

PM102289

CUSTOMER BENEFITS
Self-extinguishing Designed for wet or highly polluted environments and areas with high electrical disturbance Excellent load and short-circuit performance Low noise level Space optimization Environmentally friendly E2, C2, F1 Almost zero maintenance (occasional cleaning and recommended checks only)

High quality and reliability make Tricast cast resin transformers the perfect solution for infrastructure projects such as transmission and distribution substations, public buildings and high-rise developments. As Tricast is self-extinguishing, it provides an effective solution for use in industrial installations susceptible to fire hazards. In addition, it meets the needs of special applications such as wind farms and it is the perfect replacement for PCB transformers.

Tricast, the safe eco-friendly solution

Our Tricast range of dry type cast resin transformers complies with all your distribution transformer requirements. Tricast is available as single and three-phase units. With ratings up to 25MVA and 52 kV, 50/60 Hz, it offers AN cooling for continuous indoor service (with AF and outdoor options), and normal or reduced losses.

Tricast meets the following standards:


IEC 60076-11 EN 60726 NF EN 60076-11 and NF C 52-115 VDE 0532 part 6 DIN 42523 ANSI C57.12.01

Quality assurance

All our transformer production sites are certified ISO 9001 or ISO 14001.

02

Tricast Key transformer features

(continued)

Safety & reliability first

To ensure total compliance with the most relevant national and international standards, Tricast transformers have been put through the most stringent series of tests. Tricast is one of few transformers having successfully passed these tests and is characterized by the following features: C2 Insensitive to thermal shocks. Withstands overloads and frequent changes in loading. Dielectric tests of standard. Very resistant to polluted environments and humidity. E2; Immune to corrosive environments. Reduced flammability and self-extinguishing. Excellent classification according to IEC 60076-11 standard: F1 Fire behaviour. Tricast is your best solution for public safety. Whether for industrial plants susceptible to fire hazards or use in public buildings and high rise developments that are occupied or visited by thousands of people per day.

Tricast

Eco-friendly

Because preserving the environment is one of the most important issues today, we have designed our products to help you meet the latest environmental protection guidelines and regulations introduced by national and international governments and institutions. Tricast dry-type cast resin transformers are not only self-extinguishing, they are also free of any risk of leakage of flammable or contaminating substances. Using non-toxic high quality materials, Tricast components are designed to enable the maximum amount to be recycled. Tricast is the best solution to replace existing PCB transformers.

PM102290

Tricast tests
Electrical and routine tests Winding resistance Voltage ratio and coupling No-load losses and no-load current Short circuit impedance Load losses Dielectric tests Partial discharge testing (acceptable level: 10 pC at 1.30 Ur) Type tests
In addition to the routine tests, the following type tests can be performed on request in Schneider Electric laboratories: Impulse voltage test and temperature rise test.

Specific tests
Noise level test (this test can be performed on request in our laboratories). Short circuit withstand test.

Tests in accordance with IEC 60076-11


The tests to prove compliance with class E2 - C2 - F1 shall be performed on the same unit.

Tricast for a modern world

Minimizing space requirements and associated civil work costs is a major factor in most building projects today. Whether it is for a new city center office block, an expansion in the capacity of an industrial process or a wind farm project, the compact design of Tricast provides a costeffective solution. The exclusive casting system and advanced technology used in its HV windings give Tricast transformers the reliability and operating characteristics needed in the high-technology applications which demand maximum availability and maximum quality of electrical supplies.

Smoke classification
During a fire, the smoke alone can have considerable impact on people, property and the environment. The effect of smoke may include: Opacity: no orientation. Emission of corrosive gases which produces damage far from he fire zone and increases repair costs and downtime. Emission of noxious gases which present a health and safety hazard.

03

Tricast Specifications

Tricast
with hot polymerized resin. If necessary,
PM102292

developed in our laboratories. This system comprises 2 main components: Epoxy resin, A hydrid hardener. When polymerized, the epoxy resins

ventilation ducts can be added. A choice of copper coils and casting is also available depending on the specific application requirement.

HV winding
The HV winding is an insulated aluminium
PM102291

associated with the hardener forms a stable three-dimensional network. These systems have better properties than most of plastics. Their use in transformers is justified owing to their: Excellent resistance to thermal aging, Remarkable adherence to almost all known materials. Exceptional performance renders the windings resistant to many chemicals. Mechanical strength and high-thermal conductivity are achieved by incorporating selected mineral fillers, thus enabling heat to be evacuated during use, improved fire resistance and a dramatically reduced quantity of combustible materials. The solid insulation is obtained by vacuum casting in pre-heated moulds, followed by a hardening period under controlled temperature. After hardening by polymerization, this casting system becomes permanent. It offers excellent fire behavior and immediate self-extinction well beyond rated conditions of use.

(or copper) conductor cast under vacuum in moulds. Strong fiber glass reinforcement dramatically improves and enhances the mechanical stability and shock with standability during thermal overload.

HV/LV column assembly


The columns are assembled concentrically. The LV winding is secured directly to the core. The HV winding is blocked between

Magnetic core
The magnetic core consists of oblique cut, grain- oriented steel sheets insulated by carlite, made for low losses. It is protected on the surface with a flash-proof varnish (non-static insulation) in order to prevent the sheet from corroding and to improve the noise level.

two frames by wedges with rubber cushions that also serve as expansion absor bers. This arrangement ensure minimal movement during handling.

Exclusive casting system


In the face of increasingly strict regulations with regard to the risk of fire and pollution, Schneider Electric practices a policy of permanent research on the fire behavior of insulating materials. This has led to the exclusive class F casting system (temperature of insulation system: 155C)

LV winding
The LV winding generally consists of aluminium foils isolated between layers by a pre-impregnated insulating material

Schneider Electric Industries SAS


35, rue Joseph Monier CS 30323 F - 92506 Rueil Malmaison Cedex (France) Tl. : +33 (0)1 41 29 70 00 RCS Nanterre 954 503 439 Capital social 896 313 776 www.schneider-electric.com NRJED111053EN As standards, specifications and designs change from time to time, please ask for confirmation of the information given in this publication. Design: Schneider Electric Industries SAS Photos: Schneider Electric Industries SAS
This document has been printed on recycled paper

05-2011

2011 Schneider Electric. All rights reserved.

You might also like