Scribd
Upload
895 views

Copying Process

The document summarizes the basic photocopier theory and process used in Canon OPC copiers. It involves 6 main steps: 1) The photosensitive drum is uniformly charged. 2) An original document is exposed onto the drum, discharging areas exposed to light. 3) Toner is attracted to the charged areas of the drum to form an electrostatic image. 4) The image is transferred to paper by applying a counter charge. 5) The image is fixed to the paper by heat and pressure. 6) Residual toner is cleaned from the drum surface to prepare for the next copy cycle. The photosensitive drum plays a key role, changing conductivity when exposed to light to form the latent electrostatic image.

Uploaded by

tltl1987
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
895 views

Copying Process

The document summarizes the basic photocopier theory and process used in Canon OPC copiers. It involves 6 main steps: 1) The photosensitive drum is uniformly charged. 2) An original document is exposed onto the drum, discharging areas exposed to light. 3) Toner is attracted to the charged areas of the drum to form an electrostatic image. 4) The image is transferred to paper by applying a counter charge. 5) The image is fixed to the paper by heat and pressure. 6) Residual toner is cleaned from the drum surface to prepare for the next copy cycle. The photosensitive drum plays a key role, changing conductivity when exposed to light to form the latent electrostatic image.

Uploaded by

tltl1987
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Photocopier Theory

The information presented here is specifically for Canon OPC copiers but most of the theory can be applied to any mono component copier. The indirect electro-static copying machine was invented by C.F.Carlson in 1938 it is regarded as the Carlson Method. The Canon OPC copying method was invented in 1982.

Basic Copy Process

The Basic copy process is made up of six steps: 1. 2. 3. 4. 5. 6. Primary Corona Charging Image Exposure Developing Transfer Fixing Drum Cleaning

Photosensitive Drum
The drum is a tubular aluminum cylinder whose surface is coated with a photoconductive layer. What this means is that if light is reflected onto the drum surface then the conductive layer will change resistance. If the drum is exposed to light, then the surface will be conductive and the resistance will be low. If no light is exposed to the drum, then the surface is not conductive and the resistance is high.

What is meant by "Charging"


A metallic wire called a corona wire is stretched parallel to the drum and subjected to a high voltage. This causes a corona discharge to occur from the wire. The discharge exposes the drum surface with positive and negative charges.

1.Primary Corona Charging

During the Primary Charging phase a corona unit exposes the drum surface with a uniform negative potential. This causes the surface of the drum to have a negative potential. Positive charges occur in the base of the drum to balance the negative charges on the surface.

2.Image Exposure

The light from a lamp exposes an original and the light reflected strikes the drum surface via a lens and mirrors. When light strikes a black color on the original the light is absorbed and not reflected back to the drum. When the light strikes a white area the light is reflected back to the drum. When light strikes other colors or grays the intensity of the light reflected back to the drum varies. When light strikes the photosensitive drum the resistance of the drum surface is lowered and becomes conductive which allows the positive and negative charges in those lighted areas to cancel out. The area where the light did not hit the drum, negative charges remain on the surface. At this point in the process there is an electrostatic image on the drum. 3.Developing

As the drum turns the electrostatic image passes the developer unit which contains positively charged toner particles. Where there is a negative charge on the drum the positive charged toner particle will attract to it. This now forms a visible image on the drum surface.

4.Transfer

The transfer stage is performed by another negatively charged corona unit. The corona subjects the back side of the paper to a very strong negative charge which causes the positive toner to attract to the paper. At this point the image is now on the paper and is held there by static charges.

5.Fixing

The fixing stage is typically done by running the paper threw to heated pressure rollers thereby melting the toner and pressing it into the paper fibers. The image is now permanent on the paper.

6.Drum Cleaning

Drum cleaning is done by a mylar blade that rest on the drum surface. As the drum rotates the excess toner that was left on the drum is cleaned off. The amount of excess toner is based on the design of the machine. Most copiers today have at least 90% toner transfer to the paper.

You might also like