CAED June 2012
Uploaded by
Prasad C MCAED June 2012
Uploaded by
Prasad C MFor More Question Papers Visit - http://pediawikiblog.blogspot.
com
USN
I I I I I I I I I I I
COMPUTER AIDED ENGINEERING DRAWING
10CED14 I 24
First I Second Semester B. E. Degree Examination, May I June 2012
Time: 3 Hours
(COMMON TO All BRANCHES)
Max. Marks: 100
Note: l.Answer three full questions 3. Draw to actual scale
2. Use A4 sheets supplied 4. Missing data, if any, may be suitably assumed
Q 1. i) A point P is 15mm above HP and 25mm in front of VP. Another point Q is 25mm behind VP and 40mm below HP. Draw their projections when the distance between their projectors parallel to the X-Y line is zero mm. Add the right side view of point Q only. [ l 0 Marks] ii) The top view of a 75mm long line AB, measures 65mm while the front view is 50mm. Irs one end A is in the HP and l2mm in front ofthe VP. Draw the projections of AB and detenninc its inclination with HP and the VP. [20 Marks]
OR
Ql. A rectangular lamina of35mm X 20mm rests on HP on one of its shorter edges. The lam ina is rotated about the edge on which it rests till it appears as a square in the top view. The edge on which the lamina rests is inclined at 30 to VP. Draw its projections and find its inclination with HP. [30 Marks] Q2 . A hexagonal pyramid 25mm sides of base and 50mm axis length rests on HP on one or its Slant edges. Draw the projections of the pyramid when the axis is inclined at 45 to VP. [40 Marksl QJ. A funnel is to be made of sheet metal. The funnel tapers from 40mm to 20mm diameter to a height of 20rnm and from 20rnrn to 15mm diameter for the next 20mm height. The bottom of the funnel is beveled off to a plane inclined at 45 to the axis. Draw the development of the funnel. [30 Marks]
OR
Q3. A rectangular pyramid of base 40mm X 25mm and height 50mm is centrally placed on a cylindrical slab of diameter IOOmm and thickness 30mm. Draw the isometric projection of the combination of solids. [30 Marks]
