Scribd
Upload
232 views

2011-10-05 Section Analysis Program Response 2000

Response 2000 is a section analysis program that can predict the load-deformation behavior of reinforced concrete sections subjected to shear, moment and axial loads. It allows the user to define material properties, concrete section geometry, reinforcement layout, and applied loads. The program then solves for the load-deformation response and allows viewing the results through various plots and diagrams. An example demonstration is provided to analyze the behavior of a rectangular reinforced concrete beam.

Uploaded by

adc26
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
232 views

2011-10-05 Section Analysis Program Response 2000

Response 2000 is a section analysis program that can predict the load-deformation behavior of reinforced concrete sections subjected to shear, moment and axial loads. It allows the user to define material properties, concrete section geometry, reinforcement layout, and applied loads. The program then solves for the load-deformation response and allows viewing the results through various plots and diagrams. An example demonstration is provided to analyze the behavior of a rectangular reinforced concrete beam.

Uploaded by

adc26
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

BEHAVIOUR & NUMERICAL MODELLING OF REINFORCED CONCRETE STRUCTURES (CIVIL - 710)

SECTION ANALYSIS PROGRAM RESPONSE 2000


DESCRIPTION
Response-2000 is a user friendly sectional analysis program that can be used to predict the complete load-deformation response of a reinforced or prestressed concrete cross-section subjected to the combined actions of shear, moment, and axial load. Program Response-2000 is made freely available from the following web site: www.ecf.utoronto.ca/~bentz At this web site you will also find numerous examples and other program resources. Once you have downloaded, installed, and started Response, a menu will appear at the top of the screen. The components of each menu item are listed below.
File
New Open Close Save Save As Print Preview Print Print Setup MRU List Exit

Define
Quick Define Edit General Material Properties Concrete Section Transverse Reinf. Longitudinal Reinf. Tendons

Loads
Loads Time Dep. Effects Detail T&S Strains Strain Discontinuity Full Member Properties

Solve
Full-Response More-Detail Member Response One Load 2-Strain 1-Strain M-N Interaction M-V Interaction N-V Interaction Stop Analysis

View
Cross Section 1 Cross Section Plot 9 Cross Section Plots Next Load Stage Previous Load Stage Load-Deformation Plot Pushover Results

Options

Help

Preferences Contents Print in Color Using Help Object Options About Insert Text Box Insert Beam Graphic Insert Chart Delect Selection

The menu sub-headings shown in italics are common to most windows program and considered self-explanatory The menu sub-headings shown in bold font, are further described below. The menu sub-headings shown in normal text are additional or supplemental features.

Define-Material Properties: In this menu, the user selects basic material properties (f c,fy, fpu). By clicking a Detailed sub-option, the user may define these parameters in greater detail such as by selecting the shape of the compressive response relationship. Define-Concrete Section: In this menu, the user defines the shape of the concrete cross-section by using one of many predefined section shapes or by defining their own section. Note the menu of shapes that are available. Define-Transverse Reinforcement, Longitudinal Reinforcement, and Tendons: In selecting reinforcement, you must first define a name for the layer being defined, select the reinforcement, and then click Add. Loads-Loads: This enables the user to specify the loading (Axial Load, Moment, and Shear) as a constant + an increment.

EDCE FALL SEMESTER 2011

BEHAVIOUR & NUMERICAL MODELLING OF REINFORCED CONCRETE STRUCTURES (CIVIL - 710)

Solve-Section Response: Clicking this causes the program to solve for the load deformation response of the defined section subjected to the specified loading. Solve-2 Strain: This allows the user to specify the strain distribution over the depth. The program will find the corresponding moment and axial load. Solve-1 Strain: This finds the deformation state corresponding to the defined loading ratios with one strain defined. Solve Member Response: This will predict the response of a longitudinal section of the member. To use this feature, it is necessary to first define the longitudinal section properties in the Loads Full Member Properties menu. View-Cross Section: This shows the cross-section, material and reinforcing properties. View-1 Section Plot: This shows one selected load-deformation plot View-9 Section Plot: This shows 9 graphical images including moment-curvature response. This is the recommended View to understand the experimental response. View-Load Deformation Plot: This allows the user to create whatever plot they wish. Options-Preferences: In this sub-heading, the user selects which system of units to use.

EDCE FALL SEMESTER 2011

BEHAVIOUR & NUMERICAL MODELLING OF REINFORCED CONCRETE STRUCTURES (CIVIL - 710)

OVERVIEW OF IN-CLASS DEMONSTRATION


This is a summary of keystrokes used to examine the response of a rectangular beam (b = 300 [mm], h = 900 [mm], fc = 35 [MPa], and As = 4 22 bars that are located 60 [mm] from the bottom of the member). The underlined items shown in this example are menu selections. Use your mouse to navigate through the menu options. Options-Preferences : Select SI Metric Units and click OK Define-Material Properties : Change Concrete Cylinder Strength to 35 [MPa] and click OK Define-Concrete Section : Select the rectangular shape by clicking on it. Choose b = 300 [mm], h = 900 [mm] and click OK Define Longitudinal Reinforcement : Name = layer1 Number of Bars = 4 Selection Type : click on Select by area Bar Area = 380 [mm2] ( 22) Distance from Bottom = 60 [mm] Select Add and Click OK Loads Loads : Select Moment Increment = 1 [kNm] and set others equal to zero, Select OK Solve Sectional-Response : Once the analysis is complete, click on the control plot (lower left figure with shaded background). Page-Up and Page-Down are used move along the control plot. The figures on the right describe the response at each corresponding load step. Clicking the right Mouse button will allow the user to view the numerical results. Solve MN Interaction : Observe curve being created Press Page-Down key to illustrate condition along MN boundary

EDCE FALL SEMESTER 2011

BEHAVIOUR & NUMERICAL MODELLING OF REINFORCED CONCRETE STRUCTURES (CIVIL - 710)

Load Full Member Properties : Select the length subject to shear equal to 2500 [mm]. The default settings are for the analysis of the left side of a simply supported beam that supports a center point load. Click OK. Solve Member-Response : Press Page-Down and Page-Up to view response of longitudinal section over range of loading

EDCE FALL SEMESTER 2011

BEHAVIOUR & NUMERICAL MODELLING OF REINFORCED CONCRETE STRUCTURES (CIVIL - 710)

INPUT

OUTPUT

EDCE FALL SEMESTER 2011

You might also like