Scribd
Upload
105 views

BlueControl Datasheet

The BlueControl module is a wireless Bluetooth solution in a small package. It provides RS-232 serial communication with up to 100m range and includes all necessary Bluetooth software. Additional features include digital I/O, optional I2C interface, and PCM audio codec interface. The module can be used for wireless control, measurement, and communication applications in industries such as industrial automation, medical devices, and more.

Uploaded by

Siti Nikmatilah
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
105 views

BlueControl Datasheet

The BlueControl module is a wireless Bluetooth solution in a small package. It provides RS-232 serial communication with up to 100m range and includes all necessary Bluetooth software. Additional features include digital I/O, optional I2C interface, and PCM audio codec interface. The module can be used for wireless control, measurement, and communication applications in industries such as industrial automation, medical devices, and more.

Uploaded by

Siti Nikmatilah
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

PRELIMINARY

BlueControl
Wireless RS232 Interface Key Features
/

/ / / / / / / / / / /

Complete wireless solution including all Bluetooth protocol software components. Bluetooth Class 1, up to 100 meter range. Bluetooth Serial Port Profile Transparent operation, no software modifications or programming needed RS232 interface with 3.3 V level Up to 6 digital I/Os BlueControl Evaluation Board with BlueControl Optional I2C master interface PCM codec interface Internal or external antenna Regulated (3.3 Volt) or unregulated (4..10 Volt) power supply. Can supply regulated 3.3 Volt to external devices. DIL 28 standard package

Typical Applications 0 0 0 0 0 0 0 0 0 Commercial Systems, POS, Barcodescanner, printers, POS, CreditCard terminals Sensors and measurement devices, building technology Computer peripherals (Modem, ISDN, DSL, serial printer, Plotter, mobile phones + PDA) Industrial control, robotics, access control, parking lot control, signal controls Medical technology, analyses (Glukometer, Breathcontrol aso.) Military technology, save, non disturbish data/voice, target control systems, Telemetrics Embedded Systems, Mainboards, lock systems, Navigation systems Technical Service, system configuration (ex. phone/PBX systems, Diagnostic systems) Automotive, car diagnostics, CAN-Bus control

General Description
The BlueControl CLI module is the perfect solution for your wireless control and measurement application. It integrates a complete Bluetooth wireless solution in an easy to use dual in line package. An RS232 type serial port, digital I/Os, an optional I2C master interface and a PCM codec interface for voice applications are available. In normal operation mode one RFCOMM channel is used to transfer data to / from the serial port. This is transparent to the application. A second RFCOMM channel can be used to control the digital I/Os and / or I2C operation. Future firmware releases may also support other protocols (like the HID protocol). To configure the module for a specific application a developers kit is available. It comes with an easy to use software for configuration and evaluation of the BlueControl module. The developers kit is also compatible with industry standard software for advanced applications.

October 2004 - Preliminary Specifications are subject to change without notice

HANTZ + PARTNER The Upgrade Company! www.hantz.com


Signal Description
No. 1 2 3 4 Name NC NC RESET MISO Type Description Not connected Not connected Reset input, active high SPI data out Only used for firmware download and configuration with development kit. Leave unconnected for normal operation. SPI chip select Only used for firmware download and configuration with development kit. Le ave unconnected for normal operation. SPI clock Only used for firmware download and configuration with development kit. Leave unconnected or connect to GND for normal operation. SPI data in. Only used for firmware download and configration with development kit. Leave u unconnected or connect to GND for normal operation. UART CTS UART transmit data UART RTS UART receive data USB D+ (note 1) Connect to GND if not used USB D- (note 1) Connect to GND if not used System ground Regulated 3.3 Volt power input or output. Connect to VCC if used as input. PCM data out (note 2) PCM sync (note 2) PCM data in (note 2) PCM clock (note 2) I2C Data or general purpose I/O I2C clock output or general purpose I/O UART DTR output or general purpose I/O UART DCD input / output or general purpose I/O UART DSR input or general purpose I/O UART RI input / output or general purpose I/O Not connected Not connected Unregulated power supply. Connect to VCC3 if a regulated .3 V power supply is 3 used. external antenna connector 50 Ohm Connector type MMCX

IN OUT

CSB

IN

CLK

IN

MOSI

IN

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 A Notes: 1 2

CTS TXD RTS RXD USBDUSBD+ GND VCC3 PCMOUT PCMSYNC PCMIN PCMCLK SDA/PIO7 SCL/PIO6 DTR/PIO5 DCD/PIO4 DSR/PIO3 RI/PIO2 NC NC VCC A

IN OUT OUT IN I/O I/O Power Power OUT I/O IN I/O I/O I/O I/O I/O I/O I/O

Power Analogue

USB operation is subject to firmware support Codec operation is subject to firmware suppo rt

Device Pin Out


28 27 26 25 24 23 22 21 20 19 18 17 16 15

Mechanical Dimensions

PCMSYNC

DSR/PIO3

SCL/PIO6

SDA/PIO7

PCMOUT

PCMCLK

RI/PIO2

PCMIN

DCD/PIO4

DTR/PIO5

USBD+

RESET

USBD-

MOSI

MISO

10

12

13

BLUETOOTH is a trademark by the Bluetooth SIG Inc. Windows is a registered trademark of Microsoft.

14

11

GND

RXD

TXD

CLK

CSB

CTS

RTS

NC

NC

TM October 2004 - Preliminary Specifications are subject to change without notice

VCC3

VCC

NC

NC

HANTZ + PARTNER The Upgrade Company! www.hantz.com


Electrical Characteristics
Absolute maximum ratings Stresses above those listed here can cause permanent damage to the device. Supply Voltage (VCC) Supply Voltage (VCC3) Storage temperature 20 V 3.6 V -40 ... +85 C

Recommended Operation Conditions Item Min


Operating Voltage VCC Operating Voltage VCC3 Operation Temperature 4 3.2 -40

Typ.
3.3

Max
10 3.4 +70

Unit
V V C

Notes

DC Electrical Characteristics Item


Digital Terminals (except USB) VIL Input Low Voltage VIH Input High Voltage VOL Output Low Voltage (IO=4mA) VOH Output High Voltage (IO= -4mA) USB Terminals VIL Input Low Voltage VIH Input High Voltage VOL Output Low Voltage (IO=4mA) VOH Output High Voltage (IO= -4mA) Power Consumption Operation Current Tx active at maximum power Device Idle

Min
-0.4 0.7VCC3 VCC3-0.2

Typ.

Max
0.8 VCC3+0.4 0.2

Unit
V V V V V V V V mA mA

Notes
1 1

0.3VCC3 0.7VCC3 0 2.8 110 tbd 0.2 VCC3 150

1 1

Notes: 1) VCC3 is 3.3 Volt typical when internal voltage regulator is used.

Radio Characteristics Item


Carrier Frequency RF Antenna Impedance RF Output Power RF Receiver Sensitivity

Min
2402 11

Typ.
50 14 -80

Max
2480 17 -70

Unit
MHz Ohm dBm dBm

Notes

0.1% BER

Application Information
Serial Port The BlueControl serial port supports all Bluetooth defined standard baud rates between 2400 bps and 230400 bps. By default RTS/CTS hardware handshake is used. Antenna When the internal antenna options is used make sure not to place any copper traces or ground plane underneath the antenna because this can severely degrade the RF performance of the device.

HANTZ + PARTNER The Upgrade Company! www.hantz.com


No traces within this area

Deutschland: Tel.: 0761 / 59 21 00 Fax: 0761 / 58 52 28

Schweiz: Tel.: 061 / 27 311 - 31 Fax: 061 / 27 311 - 39

sterreich: Tel.: 01 / 58 55 430 Fax: 01 / 58 55 460

You might also like