PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION 25 lx = ly = 500 4248

CRB AT DELHI FIRST FLOOR SLAB DESIGN N/mm

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

CONCRETE GRADE STEEL GRADE Length along short direction Length along long direction Span / Depth Ratio Assumed Cover for reinforcement Overall depth required Overall depth provided Dia of Bar (Short Dir.) Dia of Bar (Long Dir.) Effective depth of slab DEAD LOAD Self weight Ceiling load if any Additional Dead loads Floor finish Services TOTAL Factored Dead load LIVE LOAD Load (kN/m2) LIVE LOAD TOTAL Factored Live load Ratio (lx / ly) 1.5 1.12 1.5

N/mm mm Two Way 4725 mm 26 15 mm 147 mm 150 mm 8 mm 8 mm dx = 131 dy = 123 Load (kN/m ) 3.75 0 3.6 0 0 7.35 11.025 kN/m2
2

SAFE IN DEPTH IN SHORT DIRECTION AS PER DEFLECTION CRITERIA

mm

` 5 5 7.5 kN/m2 kN/m

Case
ly / lx ax -ve ax +ve Short Span Coeff 1.12 0.044 0.0328

2 Long Span Coeff 1.12 0.037 0.028

Table 26, Page 91. IS 456-2000 ly / lx ay -ve ay +ve

ALONG SHORT DIRECTION

DEAD LOAD LIVE LOAD

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar(required) Spacing of bar

0.044 0.033 8.754 179 8

0.044 0.033 5.955 121 Ast Min 180 Ast red 300 Ast pro 335 165 150 Ast pro 223 255 225 kN-m mm2 mm mm kN-m mm2 mm mm

6.526 117 8

4.439 79

168 Spacing Provided= Ast Min Ast red 180 196 257 Spacing Provided=

PROTHIOUS ENGINEERING SERVICES PVT. LTD. ALONG LONG DIRECTION

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN DEAD LOAD LIVE LOAD

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar Spacing of bar CHECK FOR DEFLECTION: Fs 290 Modification factor : = Required depth = CHECK FOR SHEAR: Average Effective Depth = Vu
=

0.037 0.028 7.361 151 8

0.037 0.028 5.008 102 Ast Min 180 Ast req 253 Astpro 287 195 175 Astpro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

2.842 54 8

3.790 72

199 Spacing Provided= Ast Min Ast req 180 180 279 Spacing Provided=

% steel 0.26 1.28 128

ReferFig 4. page 38 IS 456-2000 SAFE mm

tv = tc = b= b= tc*k =

=( 131+123 ) / 2 deff.avg. Wu (0.5Lx clear span -deff.avg.) =( 11.025+7.5 ) x ( 0.5x4.248-0.127) = 36.99 kN-m 36994.425/ (1000X127) = 0.29 N/mm2 0.85 x (0.80fck) ( 1+5b-1)/(6b) (0.8*fck)/(6.89pt)or 1 whichever is greter 17.02 tc = 0.31 0.4 > tv DL+ LL

127

k= SAFE

1.3

MAXIMUM SHORT TERM DEFLECTION: Mcr = fcr X Igr/ ( 0.5 X D ) fcr 0.7 X fck Igr = = 3.50 MPa = = Mcr = 13.125 > 7.310 Mcr > M Hence Ieff = Igr maximum short term deflection 5 ML2 48 EIeff 2.18 mm =

As per Is 456:2000 Annex C

b X D^3/12 281250000.00 MPa KNm/m

(Uncracked Section)

DEFLECTION DUE TO SHRINKAGE: k3 k4 ecs L2/D Where K3 = 0.063 for fully continuous 0.72 X pt = K4 = 0.297 ecs = 0.0005 clause 6.2.4 and IS :1343 0.063 X 0.297 x 0.0005 X 4248 X 4248 / 150 1.13 mm =

Type < 1

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN q 2.2 1.6 1.1 = 20.80 = 0.036 = 0.233 = 30.52 mm 56390958.18 281250000 0.707

DEFLECTION DUE TO CREEP: Considered For days 28 Ece = Ec /( 1+ q ) = 5000 X 25/ ( 1 + 1.6) 9615.38 MPa m= Es / Ece =200000 / 9615.38 $I$54*1e-02/($D$13*10) x 20.8 rm = 2 (rm ) + (rm )^2 - (rm ) k= 0.233 X 131 kd = b(kd)^3/3 + mAst(d-kd)^2 Icr = Igr = 1000 x D^3/12 Igr > Icr h = j ( 1- k ) ( bw / b ) Ieff. = Icr 1.2-(Mcr/MD+L) h Igr > Ieff
i+cp

DATE DESIGNED BY CHECKED BY Age Of Loading For days 7 For days 28 For days 365

7-Feb-2012 D.M P.B.G

= 79975830.630

5 MD L2 48 Ece Ieff

= 10.63 mm = 6.87 mm

D+L

WDL WDL+WLL
i+cp

D+L

= 4.09 mm

cp

6.54 + 1.13

= 6.54 mm 7.67 mm 16.99 mm

Total Deflection = Allowable Deflection =

LX / 250

SAFE

Short Span Middle Strip = 3/4 ly= Long Span Middle Strip = 3/4 lx= REQUIRED DIAMETER & SACING OF BAR: SHORT SPAN 8 8

3543.75 3186

mm mm

Short Span Edge Strip = 1/8 ly= Long Span Edge Strip = 1/8 lx=

591 531

mm mm

Ast TOP Ast BOT

150 225

LONG SPAN 8 8

175 225

TWOWAY SLAB THICKNESS = 150 MM PROVIDE 8@150 MM C/C AS TOP REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@175 MM C/C AS TOP REINFORCEMENT ALONG LONG DIMENSION PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG LONG DIMENSION

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION 25 lx = ly = 500 4248

CRB AT DELHI FIRST FLOOR SLAB DESIGN N/mm

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

CONCRETE GRADE STEEL GRADE Length along short direction Length along long direction Span / Depth Ratio Assumed Cover for reinforcement Overall depth required Overall depth provided Dia of Bar (Short Dir.) Dia of Bar (Long Dir.) Effective depth of slab DEAD LOAD Self weight Ceiling load if any Additional Dead loads Floor finish Services TOTAL Factored Dead load LIVE LOAD Load (kN/m2) LIVE LOAD TOTAL Factored Live load Ratio (lx / ly) 1.5 1.04 1.5

N/mm mm Two Way 4400 mm 26 15 mm 136 mm 150 mm 8 mm 8 mm dx = 131 dy = 123 Load (kN/m ) 3.75 0 3.6 0 0 7.35 11.025 kN/m2
2

SAFE IN DEPTH IN SHORT DIRECTION AS PER DEFLECTION CRITERIA

mm

` 5 5 7.5 kN/m2 kN/m

Case
ly / lx ax -ve ax +ve Short Span Coeff 1.04 0.034 0.0256

1 Long Span Coeff 1.04 0.032 0.024

Table 26, Page 91. IS 456-2000 ly / lx ay -ve ay +ve

ALONG SHORT DIRECTION

DEAD LOAD LIVE LOAD

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar(required) Spacing of bar

0.034 0.026 6.764 138 8

0.034 0.026 4.602 93 Ast Min 180 Ast red 231 Ast pro 251 215 200 Ast pro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

5.093 91 8

3.465 61

218 Spacing Provided= Ast Min Ast red 180 180 279 Spacing Provided=

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN DEAD LOAD LIVE LOAD

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

ALONG LONG DIRECTION

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar Spacing of bar CHECK FOR DEFLECTION: Fs 290 Modification factor : = Required depth = CHECK FOR SHEAR: Average Effective Depth = Vu
=

0.032 0.024 6.366 130 8

0.032 0.024 4.331 88 Ast Min 180 Ast req 218 Astpro 251 230 200 Astpro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

2.436 46 8

3.248 61

230 Spacing Provided= Ast Min Ast req 180 180 279 Spacing Provided=

% steel 0.2 1.4 117

ReferFig 4. page 38 IS 456-2000 SAFE mm

tv = tc = b= b= tc*k =

=( 131+123 ) / 2 deff.avg. Wu (0.5Lx clear span -deff.avg.) =( 11.025+7.5 ) x ( 0.5x4.248-0.127) = 36.99 kN-m 36994.425/ (1000X127) = 0.29 N/mm2 0.85 x (0.80fck) ( 1+5b-1)/(6b) (0.8*fck)/(6.89pt)or 1 whichever is greter 17.02 tc = 0.31 0.4 > tv DL+ LL

127

k= SAFE

1.3

MAXIMUM SHORT TERM DEFLECTION: Mcr = fcr X Igr/ ( 0.5 X D ) fcr 0.7 X f Igr = ck = 3.50 MPa = = Mcr = 13.125 > 5.705 Mcr > M Hence Ieff = Igr maximum short term deflection 5 ML2 48 EIeff 1.71 mm =

As per Is 456:2000 Annex C

b X D^3/12 281250000.00 MPa KNm/m

(Uncracked Section)

DEFLECTION DUE TO SHRINKAGE: k3 k4 ecs L2/D Where K3 = 0.063 for fully continuous 0.72 X pt = K4 = 0.297 ecs = 0.0005 clause 6.2.4 and IS :1343 0.063 X 0.297 x 0.0005 X 4248 X 4248 / 150 1.13 mm =

Type < 1

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

DEFLECTION DUE TO CREEP: Considered For days 28 Ece = Ec /( 1+ q ) = 5000 X 25/ ( 1 + 1.6) 9615.38 MPa m= Es / Ece =200000 / 9615.38 $I$54*1e-02/($D$13*10) x 20.8 rm = 2 (rm ) + (rm )^2 - (rm ) k= 0.233 X 131 kd = b(kd)^3/3 + mAst(d-kd)^2 Icr = Igr = 1000 x D^3/12 Igr > Icr h = j ( 1- k ) ( bw / b ) Ieff. = Icr 1.2-(Mcr/MD+L) h Igr > Ieff
i+cp

Age Of Loading q 2.2 For days 7 1.6 For days 28 1.1 For days 365 = 20.80 = 0.036 = 0.233 = 30.52 mm 56390958.18 281250000 0.707 = 79975830.630

5 MD L2 48 Ece Ieff

= 8.30 mm = 5.36 mm

D+L

WDL WDL+WLL
i+cp

D+L

= 3.19 mm

cp

5.11 + 1.13

= 5.11 mm 6.24 mm 16.99 mm

Total Deflection = Allowable Deflection =

LX / 250

SAFE

Short Span Middle Strip = 3/4 ly= Long Span Middle Strip = 3/4 lx= REQUIRED DIAMETER & SACING OF BAR: SHORT SPAN 8 8

3300 3186

mm mm

Short Span Edge Strip = 1/8 ly= Long Span Edge Strip = 1/8 lx=

550 531

mm mm

Ast TOP Ast BOT

200 225

LONG SPAN 8 8

200 225

TWOWAY SLAB THICKNESS = 150 MM PROVIDE 8@200 MM C/C AS TOP REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@200 MM C/C AS TOP REINFORCEMENT ALONG LONG DIMENSION PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG LONG DIMENSION

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION 25 lx = ly = 500 6536

CRB AT DELHI FIRST FLOOR SLAB DESIGN N/mm

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

CONCRETE GRADE STEEL GRADE Length along short direction Length along long direction Span / Depth Ratio Assumed Cover for reinforcement Overall depth required Overall depth provided Dia of Bar (Short Dir.) Dia of Bar (Long Dir.) Effective depth of slab DEAD LOAD Self weight Ceiling load if any Additional Dead loads Floor finish Services TOTAL Factored Dead load LIVE LOAD Load (kN/m2) LIVE LOAD TOTAL Factored Live load Ratio (lx / ly) 1.5 1.37 1.5

N/mm mm Two Way 8890 mm 26 15 mm 234 mm 250 mm 10 mm 8 mm dx = 230 dy = 221 Load (kN/m ) 6.25 0 3.6 0 0 9.85 14.775 kN/m2
2

SAFE IN DEPTH IN SHORT DIRECTION AS PER DEFLECTION CRITERIA

mm

` 5 5 7.5 kN/m2 kN/m

Case
ly / lx ax -ve ax +ve Short Span Coeff 1.37 0.0612 0.0461

3 Long Span Coeff 1.37 0.037 0.028

Table 26, Page 91. IS 456-2000 ly / lx ay -ve ay +ve

ALONG SHORT DIRECTION

DEAD LOAD LIVE LOAD

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar(required) Spacing of bar

0.061 0.046 38.628 439 10

0.061 0.046 19.608 218 Ast Min 300 Ast red 657 Ast pro 785 115 100 Ast pro 449 175 175 kN-m mm2 mm mm kN-m mm2 mm mm

29.097 299 10

14.770 150

119 Spacing Provided= Ast Min Ast red 300 448 175 Spacing Provided=

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN DEAD LOAD LIVE LOAD

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

ALONG LONG DIRECTION

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar Spacing of bar CHECK FOR DEFLECTION: Fs 290 Modification factor : = Required depth = CHECK FOR SHEAR: Average Effective Depth = Vu
=

0.037 0.028 23.354 258 8

0.037 0.028 11.855 130 Ast Min 300 Ast req 388 Astpro 402 125 125 Astpro 335 165 150 kN-m mm2 mm mm kN-m mm2 mm mm

6.728 70 8

8.971 94

130 Spacing Provided= Ast Min Ast req 300 300 168 Spacing Provided=

% steel 0.35 1.175 214

ReferFig 4. page 38 IS 456-2000 SAFE mm

tv = tc = b= b= tc*k =

=( 230+221 ) / 2 deff.avg. Wu (0.5Lx clear span -deff.avg.) =( 14.775+7.5 ) x ( 0.5x6.536-0.2255) = 67.77 kN-m 67771.6875/ (1000X225.5) = 0.30 N/mm2 0.85 x (0.80fck) ( 1+5b-1)/(6b) (0.8*fck)/(6.89pt)or 1 whichever is greter 14.88 tc = 0.33 0.36 > tv DL+ LL

225.5

k= SAFE

1.1

MAXIMUM SHORT TERM DEFLECTION: Mcr = fcr X Igr/ ( 0.5 X D ) fcr 0.7 X f Igr = ck = 3.50 MPa = = Mcr = 36.458 > 29.245 Mcr > M Hence Ieff = Igr maximum short term deflection 5 ML2 48 EIeff 4.47 mm =

As per Is 456:2000 Annex C

b X D^3/12 1302083333.33 MPa KNm/m

(Uncracked Section)

DEFLECTION DUE TO SHRINKAGE: k3 k4 ecs L2/D Where K3 = 0.063 for fully continuous 0.72 X pt = K4 = 0.318 ecs = 0.0005 clause 6.2.4 and IS :1343 0.063 X 0.318 x 0.0005 X 6536 X 6536 / 250 1.71 mm =

Type < 1

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

DEFLECTION DUE TO CREEP: Considered For days 28 Ece = Ec /( 1+ q ) = 5000 X 25/ ( 1 + 1.6) 9615.38 MPa m= Es / Ece =200000 / 9615.38 $I$54*1e-02/($D$13*10) x 20.8 rm = 2 (rm ) + (rm )^2 - (rm ) k= 0.247 X 230 kd = b(kd)^3/3 + mAst(d-kd)^2 Icr = Igr = 1000 x D^3/12 Igr > Icr h = j ( 1- k ) ( bw / b ) Ieff. = Icr 1.2-(Mcr/MD+L) h Igr > Ieff
i+cp

Age Of Loading q 2.2 For days 7 1.6 For days 28 1.1 For days 365 = 20.80 = 0.041 = 0.247 = 56.81 mm 341117525.3 1302083333 0.691 = 476221590.580

5 MD L2 48 Ece Ieff

= 18.85 mm 300 = 10.93 mm

D+L

WDL WDL+WLL
i+cp

D+L

= 7.25 mm

cp

11.6 + 1.71

= 11.60 mm 13.31 mm 26.14 mm

Total Deflection = Allowable Deflection =

LX / 250

SAFE

Short Span Middle Strip = 3/4 ly= Long Span Middle Strip = 3/4 lx= REQUIRED DIAMETER & SACING OF BAR: SHORT SPAN 10 10

6667.5 4902

mm mm

Short Span Edge Strip = 1/8 ly= Long Span Edge Strip = 1/8 lx=

1111 817

mm mm

Ast TOP Ast BOT

100 175

LONG SPAN 8 8

125 150

TWOWAY SLAB THICKNESS = 250 MM PROVIDE 10@100 MM C/C AS TOP REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@125 MM C/C AS TOP REINFORCEMENT ALONG LONG DIMENSION PROVIDE 10@175 MM C/C AS BOTTOM REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@150 MM C/C AS BOTTOM REINFORCEMENT ALONG LONG DIMENSION

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION 25 lx = ly = 500 3330

CRB AT DELHI FIRST FLOOR SLAB DESIGN N/mm

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

CONCRETE GRADE STEEL GRADE Length along short direction Length along long direction Span / Depth Ratio Assumed Cover for reinforcement Overall depth required Overall depth provided Dia of Bar (Short Dir.) Dia of Bar (Long Dir.) Effective depth of slab DEAD LOAD Self weight Ceiling load if any Additional Dead loads Floor finish Services TOTAL Factored Dead load LIVE LOAD Load (kN/m2) LIVE LOAD TOTAL Factored Live load Ratio (lx / ly) 1.5 1.38 1.5

N/mm mm Two Way 4570 mm 26 15 mm 119 mm 150 mm 8 mm 8 mm dx = 131 dy = 123 Load (kN/m ) 3.75 0 3.6 0 0 7.35 11.025 kN/m2
2

SAFE IN DEPTH IN SHORT DIRECTION AS PER DEFLECTION CRITERIA

mm

` 5 5 7.5 kN/m2 kN/m

Case
ly / lx ax -ve ax +ve Short Span Coeff 1.38 0.0792 0.0594

7 Long Span Coeff 1.38 0 0.043

Table 26, Page 91. IS 456-2000 ly / lx ay -ve ay +ve

ALONG SHORT DIRECTION

DEAD LOAD LIVE LOAD

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar(required) Spacing of bar

0.079 0.059 9.683 199 8

0.079 0.059 6.587 134 Ast Min 180 Ast red 333 Ast pro 335 150 150 Ast pro 251 230 200 kN-m mm2 mm mm kN-m mm2 mm mm

7.262 130 8

4.940 88

151 Spacing Provided= Ast Min Ast red 180 218 231 Spacing Provided=

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN DEAD LOAD LIVE LOAD

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

ALONG LONG DIRECTION

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar Spacing of bar CHECK FOR DEFLECTION: Fs 290 Modification factor : = Required depth = CHECK FOR SHEAR: Average Effective Depth = Vu
=

0 0.043 0.000 0 8

0 0.043 0.000 0 Ast Min 180 Ast req 180 Astpro 251 275 200 Astpro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

2.682 51 8

3.576 68

279 Spacing Provided= Ast Min Ast req 180 180 279 Spacing Provided=

% steel 0.26 1.28 100

ReferFig 4. page 38 IS 456-2000 SAFE mm

tv = tc = b= b= tc*k =

=( 131+123 ) / 2 deff.avg. Wu (0.5Lx clear span -deff.avg.) =( 11.025+7.5 ) x ( 0.5x3.33-0.127) = 28.49 kN-m 28491.45/ (1000X127) = 0.22 N/mm2 0.85 x (0.80fck) ( 1+5b-1)/(6b) (0.8*fck)/(6.89pt)or 1 whichever is greter 15.13 tc = 0.32 0.42 > tv DL+ LL

127

k= SAFE

1.3

MAXIMUM SHORT TERM DEFLECTION: Mcr = fcr X Igr/ ( 0.5 X D ) fcr 0.7 X f Igr = ck = 3.50 MPa = = Mcr = 13.125 > 8.135 Mcr > M Hence Ieff = Igr maximum short term deflection 5 ML2 48 EIeff 1.49 mm =

As per Is 456:2000 Annex C

b X D^3/12 281250000.00 MPa KNm/m

(Uncracked Section)

DEFLECTION DUE TO SHRINKAGE: k3 k4 ecs L2/D Where K3 = 0.063 for fully continuous 0.72 X pt = K4 = 0.315 ecs = 0.0005 clause 6.2.4 and IS :1343 0.063 X 0.315 x 0.0005 X 3330 X 3330 / 150 0.73 mm =

Type < 1

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

DEFLECTION DUE TO CREEP: Considered For days 28 Ece = Ec /( 1+ q ) = 5000 X 25/ ( 1 + 1.6) 9615.38 MPa m= Es / Ece =200000 / 9615.38 $I$54*1e-02/($D$13*10) x 20.8 rm = 2 (rm ) + (rm )^2 - (rm ) k= 0.245 X 131 kd = b(kd)^3/3 + mAst(d-kd)^2 Icr = Igr = 1000 x D^3/12 Igr > Icr h = j ( 1- k ) ( bw / b ) Ieff. = Icr 1.2-(Mcr/MD+L) h Igr > Ieff
i+cp

Age Of Loading q 2.2 For days 7 1.6 For days 28 1.1 For days 365 = 20.80 = 0.040 = 0.245 = 32.10 mm 62157758.92 281250000 0.693 = 86946088.845

5 MD L2 48 Ece Ieff

= 6.69 mm = 4.32 mm

D+L

WDL WDL+WLL
i+cp

D+L

= 2.57 mm

cp

4.12 + 0.73

= 4.12 mm 4.85 mm 13.32 mm

Total Deflection = Allowable Deflection =

LX / 250

SAFE

Short Span Middle Strip = 3/4 ly= Long Span Middle Strip = 3/4 lx= REQUIRED DIAMETER & SACING OF BAR: SHORT SPAN 8 8

3427.5 2497.5

mm mm

Short Span Edge Strip = 1/8 ly= Long Span Edge Strip = 1/8 lx=

571 416

mm mm

Ast TOP Ast BOT

150 200

LONG SPAN 8 8

200 225

TWOWAY SLAB THICKNESS = 150 MM PROVIDE 8@150 MM C/C AS TOP REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@200 MM C/C AS TOP REINFORCEMENT ALONG LONG DIMENSION PROVIDE 8@200 MM C/C AS BOTTOM REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG LONG DIMENSION

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION 25 lx = ly = 500 3410

CRB AT DELHI FIRST FLOOR SLAB DESIGN N/mm

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

CONCRETE GRADE STEEL GRADE Length along short direction Length along long direction Span / Depth Ratio Assumed Cover for reinforcement Overall depth required Overall depth provided Dia of Bar (Short Dir.) Dia of Bar (Long Dir.) Effective depth of slab DEAD LOAD Self weight Ceiling load if any Additional Dead loads Floor finish Services TOTAL Factored Dead load LIVE LOAD Load (kN/m2) LIVE LOAD TOTAL Factored Live load Ratio (lx / ly) 1.5 1.35 1.5

N/mm mm Two Way 4578 mm 26 15 mm 113 mm 150 mm 8 mm 8 mm dx = 131 dy = 123 Load (kN/m ) 3.75 0 3.6 0 0 7.35 11.025 kN/m2
2

SAFE IN DEPTH IN SHORT DIRECTION AS PER DEFLECTION CRITERIA

mm

` 5 5 7.5 kN/m2 kN/m

Case
ly / lx ax -ve ax +ve Short Span Coeff 1.35 0.053 0.04

2 Long Span Coeff 1.35 0.037 0.028

Table 26, Page 91. IS 456-2000 ly / lx ay -ve ay +ve

ALONG SHORT DIRECTION

DEAD LOAD LIVE LOAD

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar(required) Spacing of bar

0.053 0.040 6.795 138 8

0.053 0.040 4.622 93 Ast Min 180 Ast red 232 Ast pro 251 215 200 Ast pro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

5.128 91 8

3.488 62

217 Spacing Provided= Ast Min Ast red 180 180 279 Spacing Provided=

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN DEAD LOAD LIVE LOAD

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

ALONG LONG DIRECTION

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar Spacing of bar CHECK FOR DEFLECTION: Fs 290 Modification factor : = Required depth = CHECK FOR SHEAR: Average Effective Depth = Vu
=

0.037 0.028 4.743 96 8

0.037 0.028 3.227 65 Ast Min 180 Ast req 180 Astpro 251 275 200 Astpro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

1.831 34 8

2.442 46

279 Spacing Provided= Ast Min Ast req 180 180 279 Spacing Provided=

% steel 0.2 1.4 94

ReferFig 4. page 38 IS 456-2000 SAFE mm

tv = tc = b= b= tc*k =

=( 131+123 ) / 2 deff.avg. Wu (0.5Lx clear span -deff.avg.) =( 11.025+7.5 ) x ( 0.5x3.41-0.127) = 29.23 kN-m 29232.45/ (1000X127) = 0.23 N/mm2 0.85 x (0.80fck) ( 1+5b-1)/(6b) (0.8*fck)/(6.89pt)or 1 whichever is greter 17.02 tc = 0.31 0.4 > tv DL+ LL

127

k= SAFE

1.3

MAXIMUM SHORT TERM DEFLECTION: Mcr = fcr X Igr/ ( 0.5 X D ) fcr 0.7 X f Igr = ck = 3.50 MPa = = Mcr = 13.125 > 5.744 Mcr > M Hence Ieff = Igr maximum short term deflection 5 ML2 48 EIeff 1.11 mm =

As per Is 456:2000 Annex C

b X D^3/12 281250000.00 MPa KNm/m

(Uncracked Section)

DEFLECTION DUE TO SHRINKAGE: k3 k4 ecs L2/D Where K3 = 0.063 for fully continuous 0.72 X pt = K4 = 0.297 ecs = 0.0005 clause 6.2.4 and IS :1343 0.063 X 0.297 x 0.0005 X 3410 X 3410 / 150 0.73 mm =

Type < 1

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

DEFLECTION DUE TO CREEP: Considered For days 28 Ece = Ec /( 1+ q ) = 5000 X 25/ ( 1 + 1.6) 9615.38 MPa m= Es / Ece =200000 / 9615.38 $I$54*1e-02/($D$13*10) x 20.8 rm = 2 (rm ) + (rm )^2 - (rm ) k= 0.233 X 131 kd = b(kd)^3/3 + mAst(d-kd)^2 Icr = Igr = 1000 x D^3/12 Igr > Icr h = j ( 1- k ) ( bw / b ) Ieff. = Icr 1.2-(Mcr/MD+L) h Igr > Ieff
i+cp

Age Of Loading q 2.2 For days 7 1.6 For days 28 1.1 For days 365 = 20.80 = 0.036 = 0.233 = 30.52 mm 56390958.18 281250000 0.707 = 79975830.630

5 MD L2 48 Ece Ieff

= 5.38 mm = 3.48 mm

D+L

WDL WDL+WLL
i+cp

D+L

= 2.07 mm

cp

3.31 + 0.73

= 3.31 mm 4.04 mm 13.64 mm

Total Deflection = Allowable Deflection =

LX / 250

SAFE

Short Span Middle Strip = 3/4 ly= Long Span Middle Strip = 3/4 lx= REQUIRED DIAMETER & SACING OF BAR: SHORT SPAN 8 8

3433.5 2557.5

mm mm

Short Span Edge Strip = 1/8 ly= Long Span Edge Strip = 1/8 lx=

572 426

mm mm

Ast TOP Ast BOT

200 225

LONG SPAN 8 8

200 225

TWOWAY SLAB THICKNESS = 150 MM PROVIDE 8@200 MM C/C AS TOP REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@200 MM C/C AS TOP REINFORCEMENT ALONG LONG DIMENSION PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG LONG DIMENSION

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION 25 lx = ly = 500 3410

CRB AT DELHI FIRST FLOOR SLAB DESIGN N/mm

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

CONCRETE GRADE STEEL GRADE Length along short direction Length along long direction Span / Depth Ratio Assumed Cover for reinforcement Overall depth required Overall depth provided Dia of Bar (Short Dir.) Dia of Bar (Long Dir.) Effective depth of slab DEAD LOAD Self weight Ceiling load if any Additional Dead loads Floor finish Services TOTAL Factored Dead load LIVE LOAD Load (kN/m2) LIVE LOAD TOTAL Factored Live load Ratio (lx / ly) 1.5 1.30 1.5

N/mm mm Two Way 4427 mm 26 15 mm 113 mm 150 mm 8 mm 8 mm dx = 131 dy = 123 Load (kN/m ) 3.75 0 3.6 0 0 7.35 11.025 kN/m2
2

SAFE IN DEPTH IN SHORT DIRECTION AS PER DEFLECTION CRITERIA

mm

` 5 5 7.5 kN/m2 kN/m

Case
ly / lx ax -ve ax +ve Short Span Coeff 1.30 0.047 0.036

1 Long Span Coeff 1.30 0.032 0.024

Table 26, Page 91. IS 456-2000 ly / lx ay -ve ay +ve

ALONG SHORT DIRECTION

DEAD LOAD LIVE LOAD

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar(required) Spacing of bar

0.047 0.036 6.025 122 8

0.047 0.036 4.099 83 Ast Min 180 Ast red 205 Ast pro 251 245 200 Ast pro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

4.615 82 8

3.140 56

245 Spacing Provided= Ast Min Ast red 180 180 279 Spacing Provided=

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN DEAD LOAD LIVE LOAD

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

ALONG LONG DIRECTION

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar Spacing of bar CHECK FOR DEFLECTION: Fs 290 Modification factor : = Required depth = CHECK FOR SHEAR: Average Effective Depth = Vu
=

0.032 0.024 4.102 83 8

0.032 0.024 2.791 56 Ast Min 180 Ast req 180 Astpro 251 275 200 Astpro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

1.570 29 8

2.093 39

279 Spacing Provided= Ast Min Ast req 180 180 279 Spacing Provided=

% steel 0.2 1.4 94

ReferFig 4. page 38 IS 456-2000 SAFE mm

tv = tc = b= b= tc*k =

=( 131+123 ) / 2 deff.avg. Wu (0.5Lx clear span -deff.avg.) =( 11.025+7.5 ) x ( 0.5x3.41-0.127) = 29.23 kN-m 29232.45/ (1000X127) = 0.23 N/mm2 0.85 x (0.80fck) ( 1+5b-1)/(6b) (0.8*fck)/(6.89pt)or 1 whichever is greter 17.02 tc = 0.31 0.4 > tv DL+ LL

127

k= SAFE

1.3

MAXIMUM SHORT TERM DEFLECTION: Mcr = fcr X Igr/ ( 0.5 X D ) fcr 0.7 X f Igr = ck = 3.50 MPa = = Mcr = 13.125 > 5.170 Mcr > M Hence Ieff = Igr maximum short term deflection 5 ML2 48 EIeff 1.00 mm =

As per Is 456:2000 Annex C

b X D^3/12 281250000.00 MPa KNm/m

(Uncracked Section)

DEFLECTION DUE TO SHRINKAGE: k3 k4 ecs L2/D Where K3 = 0.063 for fully continuous 0.72 X pt = K4 = 0.297 ecs = 0.0005 clause 6.2.4 and IS :1343 0.063 X 0.297 x 0.0005 X 3410 X 3410 / 150 0.73 mm =

Type < 1

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

DEFLECTION DUE TO CREEP: Considered For days 28 Ece = Ec /( 1+ q ) = 5000 X 25/ ( 1 + 1.6) 9615.38 MPa m= Es / Ece =200000 / 9615.38 $I$54*1e-02/($D$13*10) x 20.8 rm = 2 (rm ) + (rm )^2 - (rm ) k= 0.233 X 131 kd = b(kd)^3/3 + mAst(d-kd)^2 Icr = Igr = 1000 x D^3/12 Igr > Icr h = j ( 1- k ) ( bw / b ) Ieff. = Icr 1.2-(Mcr/MD+L) h Igr > Ieff
i+cp

Age Of Loading q 2.2 For days 7 1.6 For days 28 1.1 For days 365 = 20.80 = 0.036 = 0.233 = 30.52 mm 56390958.18 281250000 0.707 = 79975830.630

5 MD L2 48 Ece Ieff

= 4.85 mm = 3.13 mm

D+L

WDL WDL+WLL
i+cp

D+L

= 1.86 mm

cp

2.98 + 0.73

= 2.98 mm 3.71 mm 13.64 mm

Total Deflection = Allowable Deflection =

LX / 250

SAFE

Short Span Middle Strip = 3/4 ly= Long Span Middle Strip = 3/4 lx= REQUIRED DIAMETER & SACING OF BAR: SHORT SPAN 8 8

3320.25 2557.5

mm mm

Short Span Edge Strip = 1/8 ly= Long Span Edge Strip = 1/8 lx=

553 426

mm mm

Ast TOP Ast BOT

200 225

LONG SPAN 8 8

200 225

TWOWAY SLAB THICKNESS = 150 MM PROVIDE 8@200 MM C/C AS TOP REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@200 MM C/C AS TOP REINFORCEMENT ALONG LONG DIMENSION PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG LONG DIMENSION

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION 25 lx = ly = 500 4462

CRB AT DELHI FIRST FLOOR SLAB DESIGN N/mm

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

CONCRETE GRADE STEEL GRADE Length along short direction Length along long direction Span / Depth Ratio Assumed Cover for reinforcement Overall depth required Overall depth provided Dia of Bar (Short Dir.) Dia of Bar (Long Dir.) Effective depth of slab DEAD LOAD Self weight Ceiling load if any Additional Dead loads Floor finish Services TOTAL Factored Dead load LIVE LOAD Load (kN/m2) LIVE LOAD TOTAL Factored Live load Ratio (lx / ly) 1.5 1.06 1.5

N/mm mm Two Way 4710 mm 26 15 mm 149 mm 150 mm 8 mm 8 mm dx = 131 dy = 123 Load (kN/m ) 3.75 0 3.6 0 0 7.35 11.025 kN/m2
2

SAFE IN DEPTH IN SHORT DIRECTION AS PER DEFLECTION CRITERIA

mm

` 5 5 7.5 kN/m2 kN/m

Case
ly / lx ax -ve ax +ve Short Span Coeff 1.06 0.0412 0.031

3 Long Span Coeff 1.06 0.037 0.028

Table 26, Page 91. IS 456-2000 ly / lx ay -ve ay +ve

ALONG SHORT DIRECTION

DEAD LOAD LIVE LOAD

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar(required) Spacing of bar

0.041 0.031 9.043 185 8

0.041 0.031 6.152 125 Ast Min 180 Ast red 310 Ast pro 314 160 160 Ast pro 251 245 200 kN-m mm2 mm mm kN-m mm2 mm mm

6.805 122 8

4.629 82

162 Spacing Provided= Ast Min Ast red 180 204 246 Spacing Provided=

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN DEAD LOAD LIVE LOAD

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

ALONG LONG DIRECTION

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar Spacing of bar CHECK FOR DEFLECTION: Fs 290 Modification factor : = Required depth = CHECK FOR SHEAR: Average Effective Depth = Vu
=

0.037 0.028 8.122 167 8

0.037 0.028 5.525 113 Ast Min 180 Ast req 280 Astpro 287 175 175 Astpro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

3.136 59 8

4.181 79

180 Spacing Provided= Ast Min Ast req 180 180 279 Spacing Provided=

% steel 0.24 1.32 130

ReferFig 4. page 38 IS 456-2000 SAFE mm

tv = tc = b= b= tc*k =

=( 131+123 ) / 2 deff.avg. Wu (0.5Lx clear span -deff.avg.) =( 11.025+7.5 ) x ( 0.5x4.462-0.127) = 38.98 kN-m 38976.6/ (1000X127) = 0.31 N/mm2 0.85 x (0.80fck) ( 1+5b-1)/(6b) (0.8*fck)/(6.89pt)or 1 whichever is greter 15.13 tc = 0.32 0.42 > tv DL+ LL

127

k= SAFE

1.3

MAXIMUM SHORT TERM DEFLECTION: Mcr = fcr X Igr/ ( 0.5 X D ) fcr 0.7 X f Igr = ck = 3.50 MPa = = Mcr = 13.125 > 7.622 Mcr > M Hence Ieff = Igr maximum short term deflection 5 ML2 48 EIeff 2.51 mm =

As per Is 456:2000 Annex C

b X D^3/12 281250000.00 MPa KNm/m

(Uncracked Section)

DEFLECTION DUE TO SHRINKAGE: k3 k4 ecs L2/D Where K3 = 0.063 for fully continuous 0.72 X pt = K4 = 0.315 ecs = 0.0005 clause 6.2.4 and IS :1343 0.063 X 0.315 x 0.0005 X 4462 X 4462 / 150 1.32 mm =

Type < 1

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

DEFLECTION DUE TO CREEP: Considered For days 28 Ece = Ec /( 1+ q ) = 5000 X 25/ ( 1 + 1.6) 9615.38 MPa m= Es / Ece =200000 / 9615.38 $I$54*1e-02/($D$13*10) x 20.8 rm = 2 (rm ) + (rm )^2 - (rm ) k= 0.245 X 131 kd = b(kd)^3/3 + mAst(d-kd)^2 Icr = Igr = 1000 x D^3/12 Igr > Icr h = j ( 1- k ) ( bw / b ) Ieff. = Icr 1.2-(Mcr/MD+L) h Igr > Ieff
i+cp

Age Of Loading q 2.2 For days 7 1.6 For days 28 1.1 For days 365 = 20.80 = 0.040 = 0.245 = 32.10 mm 62157758.92 281250000 0.693 = 86946088.845

5 MD L2 48 Ece Ieff

= 11.25 mm = 7.27 mm

D+L

WDL WDL+WLL
i+cp

D+L

= 4.33 mm

cp

6.93 + 1.32

= 6.93 mm 8.25 mm 17.85 mm

Total Deflection = Allowable Deflection =

LX / 250

SAFE

Short Span Middle Strip = 3/4 ly= Long Span Middle Strip = 3/4 lx= REQUIRED DIAMETER & SACING OF BAR: SHORT SPAN 8 8

3532.5 3346.5

mm mm

Short Span Edge Strip = 1/8 ly= Long Span Edge Strip = 1/8 lx=

589 558

mm mm

Ast TOP Ast BOT

160 200

LONG SPAN 8 8

175 225

TWOWAY SLAB THICKNESS = 150 MM PROVIDE 8@160 MM C/C AS TOP REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@175 MM C/C AS TOP REINFORCEMENT ALONG LONG DIMENSION PROVIDE 8@200 MM C/C AS BOTTOM REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG LONG DIMENSION

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION 25 lx = ly = 500 4427

CRB AT DELHI FIRST FLOOR SLAB DESIGN N/mm

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

CONCRETE GRADE STEEL GRADE Length along short direction Length along long direction Span / Depth Ratio Assumed Cover for reinforcement Overall depth required Overall depth provided Dia of Bar (Short Dir.) Dia of Bar (Long Dir.) Effective depth of slab DEAD LOAD Self weight Ceiling load if any Additional Dead loads Floor finish Services TOTAL Factored Dead load LIVE LOAD Load (kN/m2) LIVE LOAD TOTAL Factored Live load Ratio (lx / ly) 1.5 1.11 1.5

N/mm mm Two Way 4885 mm 26 15 mm 144 mm 150 mm 8 mm 8 mm dx = 131 dy = 123 Load (kN/m ) 3.75 0 3.6 0 0 7.35 11.025 kN/m2
2

SAFE IN DEPTH IN SHORT DIRECTION AS PER DEFLECTION CRITERIA

mm

` 5 5 7.5 kN/m2 kN/m

Case
ly / lx ax -ve ax +ve Short Span Coeff 1.11 0.0376 0.0284

1 Long Span Coeff 1.11 0.032 0.024

Table 26, Page 91. IS 456-2000 ly / lx ay -ve ay +ve

ALONG SHORT DIRECTION

DEAD LOAD LIVE LOAD

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar(required) Spacing of bar

0.038 0.028 8.124 166 8

0.038 0.028 5.527 112 Ast Min 180 Ast red 278 Ast pro 287 180 175 Ast pro 251 270 200 kN-m mm2 mm mm kN-m mm2 mm mm

6.136 110 8

4.174 74

181 Spacing Provided= Ast Min Ast red 180 184 274 Spacing Provided=

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN DEAD LOAD LIVE LOAD

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

ALONG LONG DIRECTION

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar Spacing of bar CHECK FOR DEFLECTION: Fs 290 Modification factor : = Required depth = CHECK FOR SHEAR: Average Effective Depth = Vu
=

0.032 0.024 6.914 142 8

0.032 0.024 4.704 96 Ast Min 180 Ast req 237 Astpro 251 210 200 Astpro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

2.646 50 8

3.528 67

212 Spacing Provided= Ast Min Ast req 180 180 279 Spacing Provided=

% steel 0.22 1.36 125

ReferFig 4. page 38 IS 456-2000 SAFE mm

tv = tc = b= b= tc*k =

=( 131+123 ) / 2 deff.avg. Wu (0.5Lx clear span -deff.avg.) =( 11.025+7.5 ) x ( 0.5x4.427-0.127) = 38.65 kN-m 38652.4125/ (1000X127) = 0.30 N/mm2 0.85 x (0.80fck) ( 1+5b-1)/(6b) (0.8*fck)/(6.89pt)or 1 whichever is greter 15.13 tc = 0.32 0.42 > tv DL+ LL

127

k= SAFE

1.3

MAXIMUM SHORT TERM DEFLECTION: Mcr = fcr X Igr/ ( 0.5 X D ) fcr 0.7 X f Igr = ck = 3.50 MPa = = Mcr = 13.125 > 6.874 Mcr > M Hence Ieff = Igr maximum short term deflection 5 ML2 48 EIeff 2.23 mm =

As per Is 456:2000 Annex C

b X D^3/12 281250000.00 MPa KNm/m

(Uncracked Section)

DEFLECTION DUE TO SHRINKAGE: k3 k4 ecs L2/D Where K3 = 0.063 for fully continuous 0.72 X pt = K4 = 0.315 ecs = 0.0005 clause 6.2.4 and IS :1343 0.063 X 0.315 x 0.0005 X 4427 X 4427 / 150 1.30 mm =

Type < 1

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

DEFLECTION DUE TO CREEP: Considered For days 28 Ece = Ec /( 1+ q ) = 5000 X 25/ ( 1 + 1.6) 9615.38 MPa m= Es / Ece =200000 / 9615.38 $I$54*1e-02/($D$13*10) x 20.8 rm = 2 (rm ) + (rm )^2 - (rm ) k= 0.245 X 131 kd = b(kd)^3/3 + mAst(d-kd)^2 Icr = Igr = 1000 x D^3/12 Igr > Icr h = j ( 1- k ) ( bw / b ) Ieff. = Icr 1.2-(Mcr/MD+L) h Igr > Ieff
i+cp

Age Of Loading q 2.2 For days 7 1.6 For days 28 1.1 For days 365 = 20.80 = 0.040 = 0.245 = 32.10 mm 62157758.92 281250000 0.693 = 86946088.845

5 MD L2 48 Ece Ieff

= 9.99 mm = 6.46 mm

D+L

WDL WDL+WLL
i+cp

D+L

= 3.84 mm

cp

6.15 + 1.3

= 6.15 mm 7.45 mm 17.71 mm

Total Deflection = Allowable Deflection =

LX / 250

SAFE

Short Span Middle Strip = 3/4 ly= Long Span Middle Strip = 3/4 lx= REQUIRED DIAMETER & SACING OF BAR: SHORT SPAN 8 8

3663.75 3320.25

mm mm

Short Span Edge Strip = 1/8 ly= Long Span Edge Strip = 1/8 lx=

611 553

mm mm

Ast TOP Ast BOT

175 200

LONG SPAN 8 8

200 225

TWOWAY SLAB THICKNESS = 150 MM PROVIDE 8@175 MM C/C AS TOP REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@200 MM C/C AS TOP REINFORCEMENT ALONG LONG DIMENSION PROVIDE 8@200 MM C/C AS BOTTOM REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG LONG DIMENSION

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION 25 lx = ly = 500 4500

CRB AT DELHI FIRST FLOOR SLAB DESIGN N/mm

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

CONCRETE GRADE STEEL GRADE Length along short direction Length along long direction Span / Depth Ratio Assumed Cover for reinforcement Overall depth required Overall depth provided Dia of Bar (Short Dir.) Dia of Bar (Long Dir.) Effective depth of slab DEAD LOAD Self weight Ceiling load if any Additional Dead loads Floor finish Services TOTAL Factored Dead load LIVE LOAD Load (kN/m2) LIVE LOAD TOTAL Factored Live load Ratio (lx / ly) 1.5 1.02 1.5

N/mm mm Two Way 4575 mm 26 15 mm 148 mm 150 mm 8 mm 8 mm dx = 131 dy = 123 Load (kN/m ) 3.75 0 3.6 0 0 7.35 11.025 kN/m2
2

SAFE IN DEPTH IN SHORT DIRECTION AS PER DEFLECTION CRITERIA

mm

` 5 5 7.5 kN/m2 kN/m

Case
ly / lx ax -ve ax +ve Short Span Coeff 1.02 0.0384 0.029

3 Long Span Coeff 1.02 0.037 0.028

Table 26, Page 91. IS 456-2000 ly / lx ay -ve ay +ve

ALONG SHORT DIRECTION

DEAD LOAD LIVE LOAD

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar(required) Spacing of bar

0.038 0.029 8.573 175 8

0.038 0.029 5.832 118 Ast Min 180 Ast red 294 Ast pro 296 170 170 Ast pro 251 255 200 kN-m mm2 mm mm kN-m mm2 mm mm

6.474 116 8

4.404 78

171 Spacing Provided= Ast Min Ast red 180 194 259 Spacing Provided=

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN DEAD LOAD LIVE LOAD

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

ALONG LONG DIRECTION

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar Spacing of bar CHECK FOR DEFLECTION: Fs 290 Modification factor : = Required depth = CHECK FOR SHEAR: Average Effective Depth = Vu
=

0.037 0.028 8.260 170 8

0.037 0.028 5.619 115 Ast Min 180 Ast req 285 Astpro 287 175 175 Astpro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

3.189 60 8

4.253 81

176 Spacing Provided= Ast Min Ast req 180 180 279 Spacing Provided=

% steel 0.23 1.34 129

ReferFig 4. page 38 IS 456-2000 SAFE mm

tv = tc = b= b= tc*k =

=( 131+123 ) / 2 deff.avg. Wu (0.5Lx clear span -deff.avg.) =( 11.025+7.5 ) x ( 0.5x4.5-0.127) = 39.33 kN-m 39328.575/ (1000X127) = 0.31 N/mm2 0.85 x (0.80fck) ( 1+5b-1)/(6b) (0.8*fck)/(6.89pt)or 1 whichever is greter 15.13 tc = 0.32 0.42 > tv DL+ LL

127

k= SAFE

1.3

MAXIMUM SHORT TERM DEFLECTION: Mcr = fcr X Igr/ ( 0.5 X D ) fcr 0.7 X f Igr = ck = 3.50 MPa = = Mcr = 13.125 > 7.253 Mcr > M Hence Ieff = Igr maximum short term deflection 5 ML2 48 EIeff 2.43 mm =

As per Is 456:2000 Annex C

b X D^3/12 281250000.00 MPa KNm/m

(Uncracked Section)

DEFLECTION DUE TO SHRINKAGE: k3 k4 ecs L2/D Where K3 = 0.063 for fully continuous 0.72 X pt = K4 = 0.315 ecs = 0.0005 clause 6.2.4 and IS :1343 0.063 X 0.315 x 0.0005 X 4500 X 4500 / 150 1.34 mm =

Type < 1

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

DEFLECTION DUE TO CREEP: Considered For days 28 Ece = Ec /( 1+ q ) = 5000 X 25/ ( 1 + 1.6) 9615.38 MPa m= Es / Ece =200000 / 9615.38 $I$54*1e-02/($D$13*10) x 20.8 rm = 2 (rm ) + (rm )^2 - (rm ) k= 0.245 X 131 kd = b(kd)^3/3 + mAst(d-kd)^2 Icr = Igr = 1000 x D^3/12 Igr > Icr h = j ( 1- k ) ( bw / b ) Ieff. = Icr 1.2-(Mcr/MD+L) h Igr > Ieff
i+cp

Age Of Loading q 2.2 For days 7 1.6 For days 28 1.1 For days 365 = 20.80 = 0.040 = 0.245 = 32.10 mm 62157758.92 281250000 0.693 = 86946088.845

5 MD L2 48 Ece Ieff

= 10.89 mm = 7.04 mm

D+L

WDL WDL+WLL
i+cp

D+L

= 4.19 mm

cp

6.7 + 1.34

= 6.70 mm 8.04 mm 18.00 mm

Total Deflection = Allowable Deflection =

LX / 250

SAFE

Short Span Middle Strip = 3/4 ly= Long Span Middle Strip = 3/4 lx= REQUIRED DIAMETER & SACING OF BAR: SHORT SPAN 8 8

3431.25 3375

mm mm

Short Span Edge Strip = 1/8 ly= Long Span Edge Strip = 1/8 lx=

572 563

mm mm

Ast TOP Ast BOT

170 200

LONG SPAN 8 8

175 225

TWOWAY SLAB THICKNESS = 150 MM PROVIDE 8@170 MM C/C AS TOP REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@175 MM C/C AS TOP REINFORCEMENT ALONG LONG DIMENSION PROVIDE 8@200 MM C/C AS BOTTOM REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG LONG DIMENSION

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION 25 lx = ly = 500 4300

CRB AT DELHI FIRST FLOOR SLAB DESIGN N/mm

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

CONCRETE GRADE STEEL GRADE Length along short direction Length along long direction Span / Depth Ratio Assumed Cover for reinforcement Overall depth required Overall depth provided Dia of Bar (Short Dir.) Dia of Bar (Long Dir.) Effective depth of slab DEAD LOAD Self weight Ceiling load if any Additional Dead loads Floor finish Services TOTAL Factored Dead load LIVE LOAD Load (kN/m2) LIVE LOAD TOTAL Factored Live load Ratio (lx / ly) 1.5 1.63 1.5

N/mm mm Two Way 7000 mm 26 15 mm 148 mm 175 mm 8 mm 8 mm dx = 156 dy = 148 Load (kN/m ) 4.375 0 3.6 0 0 7.975 11.9625 kN/m2
2

SAFE IN DEPTH IN SHORT DIRECTION AS PER DEFLECTION CRITERIA

mm

` 5 5 7.5 kN/m2 kN/m

Case
ly / lx ax -ve ax +ve Short Span Coeff 1.63 0.06064 0.04608

2 Long Span Coeff 1.63 0.037 0.028

Table 26, Page 91. IS 456-2000 ly / lx ay -ve ay +ve

ALONG SHORT DIRECTION

DEAD LOAD LIVE LOAD

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar(required) Spacing of bar

0.061 0.046 13.413 226 8

0.061 0.046 8.409 140 Ast Min 210 Ast red 367 Ast pro 402 135 125 Ast pro 251 200 200 kN-m mm2 mm mm kN-m mm2 mm mm

10.192 153 8

6.390 95

137 Spacing Provided= Ast Min Ast red 210 249 202 Spacing Provided=

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN DEAD LOAD LIVE LOAD

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

ALONG LONG DIRECTION

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar Spacing of bar CHECK FOR DEFLECTION: Fs 290 Modification factor : = Required depth = CHECK FOR SHEAR: Average Effective Depth = Vu
=

0.037 0.028 8.184 137 8

0.037 0.028 5.131 85 Ast Min 210 Ast req 222 Astpro 251 225 200 Astpro 223 235 225 kN-m mm2 mm mm kN-m mm2 mm mm

2.912 46 8

3.883 61

226 Spacing Provided= Ast Min Ast req 210 210 239 Spacing Provided=

% steel 0.26 1.28 129

ReferFig 4. page 38 IS 456-2000 SAFE mm

tv = tc = b= b= tc*k =

=( 156+148 ) / 2 deff.avg. Wu (0.5Lx clear span -deff.avg.) =( 11.9625+7.5 ) x ( 0.5x4.3-0.152) = 38.89 kN-m 38886.075/ (1000X152) = 0.26 N/mm2 0.85 x (0.80fck) ( 1+5b-1)/(6b) (0.8*fck)/(6.89pt)or 1 whichever is greter 18.02 tc = 0.3 0.38 > tv DL+ LL

152

k= SAFE

1.25

MAXIMUM SHORT TERM DEFLECTION: Mcr = fcr X Igr/ ( 0.5 X D ) fcr 0.7 X f Igr = ck = 3.50 MPa = = Mcr = 17.865 > 11.055 Mcr > M Hence Ieff = Igr maximum short term deflection 5 ML2 48 EIeff 2.13 mm =

As per Is 456:2000 Annex C

b X D^3/12 446614583.33 MPa KNm/m

(Uncracked Section)

DEFLECTION DUE TO SHRINKAGE: k3 k4 ecs L2/D Where K3 = 0.063 for fully continuous 0.72 X pt = K4 = 0.289 ecs = 0.0005 clause 6.2.4 and IS :1343 0.063 X 0.289 x 0.0005 X 4300 X 4300 / 175 0.96 mm =

Type < 1

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

DEFLECTION DUE TO CREEP: Considered For days 28 Ece = Ec /( 1+ q ) = 5000 X 25/ ( 1 + 1.6) 9615.38 MPa m= Es / Ece =200000 / 9615.38 $I$54*1e-02/($D$13*10) x 20.8 rm = 2 (rm ) + (rm )^2 - (rm ) k= 0.228 X 156 kd = b(kd)^3/3 + mAst(d-kd)^2 Icr = Igr = 1000 x D^3/12 Igr > Icr h = j ( 1- k ) ( bw / b ) Ieff. = Icr 1.2-(Mcr/MD+L) h Igr > Ieff
i+cp

Age Of Loading q 2.2 For days 7 1.6 For days 28 1.1 For days 365 = 20.80 = 0.034 = 0.228 = 35.57 mm 90819380.34 446614583.3 0.713 = 129575375.002

5 MD L2 48 Ece Ieff

= 10.50 mm = 6.57 mm

D+L

WDL WDL+WLL
i+cp

D+L

= 4.04 mm

cp

6.46 + 0.96

= 6.46 mm 7.42 mm 17.20 mm

Total Deflection = Allowable Deflection =

LX / 250

SAFE

Short Span Middle Strip = 3/4 ly= Long Span Middle Strip = 3/4 lx= REQUIRED DIAMETER & SACING OF BAR: SHORT SPAN 8 8

5250 3225

mm mm

Short Span Edge Strip = 1/8 ly= Long Span Edge Strip = 1/8 lx=

875 538

mm mm

Ast TOP Ast BOT

125 200

LONG SPAN 8 8

200 225

TWOWAY SLAB THICKNESS = 175 MM PROVIDE 8@125 MM C/C AS TOP REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@200 MM C/C AS TOP REINFORCEMENT ALONG LONG DIMENSION PROVIDE 8@200 MM C/C AS BOTTOM REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG LONG DIMENSION

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION 25 lx = ly = 500 4150

CRB AT DELHI FIRST FLOOR SLAB DESIGN N/mm

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

CONCRETE GRADE STEEL GRADE Length along short direction Length along long direction Span / Depth Ratio Assumed Cover for reinforcement Overall depth required Overall depth provided Dia of Bar (Short Dir.) Dia of Bar (Long Dir.) Effective depth of slab DEAD LOAD Self weight Ceiling load if any Additional Dead loads Floor finish Services TOTAL Factored Dead load LIVE LOAD Load (kN/m2) LIVE LOAD TOTAL Factored Live load Ratio (lx / ly) 1.5 1.14 1.5

N/mm mm Two Way 4700 mm 26 15 mm 150 mm 150 mm 8 mm 8 mm dx = 131 dy = 123 Load (kN/m ) 3.75 0 3.6 0 0 7.35 11.025 kN/m2
2

SAFE IN DEPTH IN SHORT DIRECTION AS PER DEFLECTION CRITERIA

mm

` 5 5 7.5 kN/m2 kN/m

Case
ly / lx ax -ve ax +ve Short Span Coeff 1.14 0.0558 0.042

4 Long Span Coeff 1.14 0.047 0.035

Table 26, Page 91. IS 456-2000 ly / lx ay -ve ay +ve

ALONG SHORT DIRECTION

DEAD LOAD LIVE LOAD

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar(required) Spacing of bar

0.056 0.042 10.595 218 8

0.056 0.042 7.208 147 Ast Min 180 Ast red 365 Ast pro 372 135 135 Ast pro 251 205 200 kN-m mm2 mm mm kN-m mm2 mm mm

7.975 143 8

5.425 97

138 Spacing Provided= Ast Min Ast red 180 240 210 Spacing Provided=

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN DEAD LOAD LIVE LOAD

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

ALONG LONG DIRECTION

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar Spacing of bar CHECK FOR DEFLECTION: Fs 290 Modification factor : = Required depth = CHECK FOR SHEAR: Average Effective Depth = Vu
=

0.047 0.035 8.924 184 8

0.047 0.035 6.071 124 Ast Min 180 Ast req 308 Astpro 335 160 150 Astpro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

3.391 64 8

4.521 86

163 Spacing Provided= Ast Min Ast req 180 180 279 Spacing Provided=

% steel 0.29 1.22 131

ReferFig 4. page 38 IS 456-2000 SAFE mm

tv = tc = b= b= tc*k =

=( 131+123 ) / 2 deff.avg. Wu (0.5Lx clear span -deff.avg.) =( 11.025+7.5 ) x ( 0.5x4.15-0.127) = 36.09 kN-m 36086.7/ (1000X127) = 0.28 N/mm2 0.85 x (0.80fck) ( 1+5b-1)/(6b) (0.8*fck)/(6.89pt)or 1 whichever is greter 15.13 tc = 0.32 0.42 > tv DL+ LL

127

k= SAFE

1.3

MAXIMUM SHORT TERM DEFLECTION: Mcr = fcr X Igr/ ( 0.5 X D ) fcr 0.7 X f Igr = ck = 3.50 MPa = = Mcr = 13.125 > 8.933 Mcr > M Hence Ieff = Igr maximum short term deflection 5 ML2 48 EIeff 2.55 mm =

As per Is 456:2000 Annex C

b X D^3/12 281250000.00 MPa KNm/m

(Uncracked Section)

DEFLECTION DUE TO SHRINKAGE: k3 k4 ecs L2/D Where K3 = 0.063 for fully continuous 0.72 X pt = K4 = 0.315 ecs = 0.0005 clause 6.2.4 and IS :1343 0.063 X 0.315 x 0.0005 X 4150 X 4150 / 150 1.14 mm =

Type < 1

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

DEFLECTION DUE TO CREEP: Considered For days 28 Ece = Ec /( 1+ q ) = 5000 X 25/ ( 1 + 1.6) 9615.38 MPa m= Es / Ece =200000 / 9615.38 $I$54*1e-02/($D$13*10) x 20.8 rm = 2 (rm ) + (rm )^2 - (rm ) k= 0.245 X 131 kd = b(kd)^3/3 + mAst(d-kd)^2 Icr = Igr = 1000 x D^3/12 Igr > Icr h = j ( 1- k ) ( bw / b ) Ieff. = Icr 1.2-(Mcr/MD+L) h Igr > Ieff
i+cp

Age Of Loading q 2.2 For days 7 1.6 For days 28 1.1 For days 365 = 20.80 = 0.040 = 0.245 = 32.10 mm 62157758.92 281250000 0.693 = 86946088.845

5 MD L2 48 Ece Ieff

= 11.41 mm = 7.37 mm

D+L

WDL WDL+WLL
i+cp

D+L

= 4.39 mm

cp

7.02 + 1.14

= 7.02 mm 8.16 mm 16.60 mm

Total Deflection = Allowable Deflection =

LX / 250

SAFE

Short Span Middle Strip = 3/4 ly= Long Span Middle Strip = 3/4 lx= REQUIRED DIAMETER & SACING OF BAR: SHORT SPAN 8 8

3525 3112.5

mm mm

Short Span Edge Strip = 1/8 ly= Long Span Edge Strip = 1/8 lx=

588 519

mm mm

Ast TOP Ast BOT

135 200

LONG SPAN 8 8

150 225

TWOWAY SLAB THICKNESS = 150 MM PROVIDE 8@135 MM C/C AS TOP REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@150 MM C/C AS TOP REINFORCEMENT ALONG LONG DIMENSION PROVIDE 8@200 MM C/C AS BOTTOM REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG LONG DIMENSION

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION 25 lx = ly = 500 3050

CRB AT DELHI FIRST FLOOR SLAB DESIGN N/mm

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

CONCRETE GRADE STEEL GRADE Length along short direction Length along long direction Span / Depth Ratio Assumed Cover for reinforcement Overall depth required Overall depth provided Dia of Bar (Short Dir.) Dia of Bar (Long Dir.) Effective depth of slab DEAD LOAD Self weight Ceiling load if any Additional Dead loads Floor finish Services TOTAL Factored Dead load LIVE LOAD Load (kN/m2) LIVE LOAD TOTAL Factored Live load Ratio (lx / ly) 1.5 1.64 1.5

N/mm mm Two Way 5000 mm 26 15 mm 105 mm 150 mm 8 mm 8 mm dx = 131 dy = 123 Load (kN/m ) 3.75 0 3.6 0 0 7.35 11.025 kN/m2
2

SAFE IN DEPTH IN SHORT DIRECTION AS PER DEFLECTION CRITERIA

mm

` 5 5 7.5 kN/m2 kN/m

Case
ly / lx ax -ve ax +ve Short Span Coeff 1.64 0.08004 0.05992

4 Long Span Coeff 1.64 0.047 0.035

Table 26, Page 91. IS 456-2000 ly / lx ay -ve ay +ve

ALONG SHORT DIRECTION

DEAD LOAD LIVE LOAD

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar(required) Spacing of bar

0.080 0.060 8.209 168 8

0.080 0.060 5.584 113 Ast Min 180 Ast red 281 Ast pro 287 175 175 Ast pro 223 270 225 kN-m mm2 mm mm kN-m mm2 mm mm

6.145 110 8

4.181 74

179 Spacing Provided= Ast Min Ast red 180 184 273 Spacing Provided=

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN DEAD LOAD LIVE LOAD

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

ALONG LONG DIRECTION

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar Spacing of bar CHECK FOR DEFLECTION: Fs 290 Modification factor : = Required depth = CHECK FOR SHEAR: Average Effective Depth = Vu
=

0.047 0.035 4.820 98 8

0.047 0.035 3.279 66 Ast Min 180 Ast req 180 Astpro 251 275 200 Astpro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

1.831 34 8

2.442 46

279 Spacing Provided= Ast Min Ast req 180 180 279 Spacing Provided=

% steel 0.22 1.36 86

ReferFig 4. page 38 IS 456-2000 SAFE mm

tv = tc = b= b= tc*k =

=( 131+123 ) / 2 deff.avg. Wu (0.5Lx clear span -deff.avg.) =( 11.025+7.5 ) x ( 0.5x3.05-0.127) = 25.90 kN-m 25897.95/ (1000X127) = 0.20 N/mm2 0.85 x (0.80fck) ( 1+5b-1)/(6b) (0.8*fck)/(6.89pt)or 1 whichever is greter 17.02 tc = 0.31 0.4 > tv DL+ LL

127

k= SAFE

1.3

MAXIMUM SHORT TERM DEFLECTION: Mcr = fcr X Igr/ ( 0.5 X D ) fcr 0.7 X f Igr = ck = 3.50 MPa = = Mcr = 13.125 > 6.884 Mcr > M Hence Ieff = Igr maximum short term deflection 5 ML2 48 EIeff 1.06 mm =

As per Is 456:2000 Annex C

b X D^3/12 281250000.00 MPa KNm/m

(Uncracked Section)

DEFLECTION DUE TO SHRINKAGE: k3 k4 ecs L2/D Where K3 = 0.063 for fully continuous 0.72 X pt = K4 = 0.297 ecs = 0.0005 clause 6.2.4 and IS :1343 0.063 X 0.297 x 0.0005 X 3050 X 3050 / 150 0.58 mm =

Type < 1

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

DEFLECTION DUE TO CREEP: Considered For days 28 Ece = Ec /( 1+ q ) = 5000 X 25/ ( 1 + 1.6) 9615.38 MPa m= Es / Ece =200000 / 9615.38 $I$54*1e-02/($D$13*10) x 20.8 rm = 2 (rm ) + (rm )^2 - (rm ) k= 0.233 X 131 kd = b(kd)^3/3 + mAst(d-kd)^2 Icr = Igr = 1000 x D^3/12 Igr > Icr h = j ( 1- k ) ( bw / b ) Ieff. = Icr 1.2-(Mcr/MD+L) h Igr > Ieff
i+cp

Age Of Loading q 2.2 For days 7 1.6 For days 28 1.1 For days 365 = 20.80 = 0.036 = 0.233 = 30.52 mm 56390958.18 281250000 0.707 = 79975830.630

5 MD L2 48 Ece Ieff

= 5.16 mm = 3.34 mm

D+L

WDL WDL+WLL
i+cp

D+L

= 1.99 mm

cp

3.18 + 0.58

= 3.18 mm 3.76 mm 12.20 mm

Total Deflection = Allowable Deflection =

LX / 250

SAFE

Short Span Middle Strip = 3/4 ly= Long Span Middle Strip = 3/4 lx= REQUIRED DIAMETER & SACING OF BAR: SHORT SPAN 8 8

3750 2287.5

mm mm

Short Span Edge Strip = 1/8 ly= Long Span Edge Strip = 1/8 lx=

625 381

mm mm

Ast TOP Ast BOT

175 225

LONG SPAN 8 8

200 225

TWOWAY SLAB THICKNESS = 150 MM PROVIDE 8@175 MM C/C AS TOP REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@200 MM C/C AS TOP REINFORCEMENT ALONG LONG DIMENSION PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG LONG DIMENSION

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION 25 lx = ly = 500 3450

CRB AT DELHI FIRST FLOOR SLAB DESIGN N/mm

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

CONCRETE GRADE STEEL GRADE Length along short direction Length along long direction Span / Depth Ratio Assumed Cover for reinforcement Overall depth required Overall depth provided Dia of Bar (Short Dir.) Dia of Bar (Long Dir.) Effective depth of slab DEAD LOAD Self weight Ceiling load if any Additional Dead loads Floor finish Services TOTAL Factored Dead load LIVE LOAD Load (kN/m2) LIVE LOAD TOTAL Factored Live load Ratio (lx / ly) 1.5 1.02 1.5

N/mm mm Two Way 3500 mm 26 15 mm 114 mm 150 mm 8 mm 8 mm dx = 131 dy = 123 Load (kN/m ) 3.75 0 3.6 0 0 7.35 11.025 kN/m2
2

SAFE IN DEPTH IN SHORT DIRECTION AS PER DEFLECTION CRITERIA

mm

` 5 5 7.5 kN/m2 kN/m

Case
ly / lx ax -ve ax +ve Short Span Coeff 1.02 0.0384 0.029

3 Long Span Coeff 1.02 0.037 0.028

Table 26, Page 91. IS 456-2000 ly / lx ay -ve ay +ve

ALONG SHORT DIRECTION

DEAD LOAD LIVE LOAD

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar(required) Spacing of bar

0.038 0.029 5.039 102 8

0.038 0.029 3.428 69 Ast Min 180 Ast red 180 Ast pro 251 275 200 Ast pro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

3.806 68 8

2.589 46

279 Spacing Provided= Ast Min Ast red 180 180 279 Spacing Provided=

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN DEAD LOAD LIVE LOAD

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

ALONG LONG DIRECTION

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar Spacing of bar CHECK FOR DEFLECTION: Fs 290 Modification factor : = Required depth = CHECK FOR SHEAR: Average Effective Depth = Vu
=

0.037 0.028 4.855 99 8

0.037 0.028 3.303 67 Ast Min 180 Ast req 180 Astpro 251 275 200 Astpro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

1.875 35 8

2.500 47

279 Spacing Provided= Ast Min Ast req 180 180 279 Spacing Provided=

% steel 0.2 1.4 95

ReferFig 4. page 38 IS 456-2000 SAFE mm

tv = tc = b= b= tc*k =

=( 131+123 ) / 2 deff.avg. Wu (0.5Lx clear span -deff.avg.) =( 11.025+7.5 ) x ( 0.5x3.45-0.127) = 29.60 kN-m 29602.95/ (1000X127) = 0.23 N/mm2 0.85 x (0.80fck) ( 1+5b-1)/(6b) (0.8*fck)/(6.89pt)or 1 whichever is greter 17.02 tc = 0.31 0.4 > tv DL+ LL

127

k= SAFE

1.3

MAXIMUM SHORT TERM DEFLECTION: Mcr = fcr X Igr/ ( 0.5 X D ) fcr 0.7 X f Igr = ck = 3.50 MPa = = Mcr = 13.125 > 4.263 Mcr > M Hence Ieff = Igr maximum short term deflection 5 ML2 48 EIeff 0.84 mm =

As per Is 456:2000 Annex C

b X D^3/12 281250000.00 MPa KNm/m

(Uncracked Section)

DEFLECTION DUE TO SHRINKAGE: k3 k4 ecs L2/D Where K3 = 0.063 for fully continuous 0.72 X pt = K4 = 0.297 ecs = 0.0005 clause 6.2.4 and IS :1343 0.063 X 0.297 x 0.0005 X 3450 X 3450 / 150 0.74 mm =

Type < 1

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

DEFLECTION DUE TO CREEP: Considered For days 28 Ece = Ec /( 1+ q ) = 5000 X 25/ ( 1 + 1.6) 9615.38 MPa m= Es / Ece =200000 / 9615.38 $I$54*1e-02/($D$13*10) x 20.8 rm = 2 (rm ) + (rm )^2 - (rm ) k= 0.233 X 131 kd = b(kd)^3/3 + mAst(d-kd)^2 Icr = Igr = 1000 x D^3/12 Igr > Icr h = j ( 1- k ) ( bw / b ) Ieff. = Icr 1.2-(Mcr/MD+L) h Igr > Ieff
i+cp

Age Of Loading q 2.2 For days 7 1.6 For days 28 1.1 For days 365 = 20.80 = 0.036 = 0.233 = 30.52 mm 56390958.18 281250000 0.707 = 79975830.630

5 MD L2 48 Ece Ieff

= 4.09 mm = 2.64 mm

D+L

WDL WDL+WLL
i+cp

D+L

= 1.57 mm

cp

2.52 + 0.74

= 2.52 mm 3.26 mm 13.80 mm

Total Deflection = Allowable Deflection =

LX / 250

SAFE

Short Span Middle Strip = 3/4 ly= Long Span Middle Strip = 3/4 lx= REQUIRED DIAMETER & SACING OF BAR: SHORT SPAN 8 8

2625 2587.5

mm mm

Short Span Edge Strip = 1/8 ly= Long Span Edge Strip = 1/8 lx=

438 431

mm mm

Ast TOP Ast BOT

200 225

LONG SPAN 8 8

200 225

TWOWAY SLAB THICKNESS = 150 MM PROVIDE 8@200 MM C/C AS TOP REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@200 MM C/C AS TOP REINFORCEMENT ALONG LONG DIMENSION PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG LONG DIMENSION

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION 25 lx = ly = 500 2250

CRB AT DELHI FIRST FLOOR SLAB DESIGN N/mm

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

CONCRETE GRADE STEEL GRADE Length along short direction Length along long direction Span / Depth Ratio Assumed Cover for reinforcement Overall depth required Overall depth provided Dia of Bar (Short Dir.) Dia of Bar (Long Dir.) Effective depth of slab DEAD LOAD Self weight Ceiling load if any Additional Dead loads Floor finish Services TOTAL Factored Dead load LIVE LOAD Load (kN/m2) LIVE LOAD TOTAL Factored Live load Ratio (lx / ly) 1.5 1.55 1.5

N/mm mm Two Way 3485 mm 26 15 mm 81 mm 150 mm 8 mm 8 mm dx = 131 dy = 123 Load (kN/m ) 3.75 0 3.6 0 0 7.35 11.025 kN/m2
2

SAFE IN DEPTH IN SHORT DIRECTION AS PER DEFLECTION CRITERIA

mm

` 5 5 7.5 kN/m2 kN/m

Case
ly / lx ax -ve ax +ve Short Span Coeff 1.55 0.0768 0.0574

4 Long Span Coeff 1.55 0.047 0.035

Table 26, Page 91. IS 456-2000 ly / lx ay -ve ay +ve

ALONG SHORT DIRECTION

DEAD LOAD LIVE LOAD

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar(required) Spacing of bar

0.077 0.057 4.287 87 8

0.077 0.057 2.916 59 Ast Min 180 Ast red 180 Ast pro 251 275 200 Ast pro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

3.204 57 8

2.179 38

279 Spacing Provided= Ast Min Ast red 180 180 279 Spacing Provided=

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN DEAD LOAD LIVE LOAD

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

ALONG LONG DIRECTION

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar Spacing of bar CHECK FOR DEFLECTION: Fs 290 Modification factor : = Required depth = CHECK FOR SHEAR: Average Effective Depth = Vu
=

0.047 0.035 2.623 53 8

0.047 0.035 1.785 36 Ast Min 180 Ast req 180 Astpro 251 275 200 Astpro 223 275 225 kN-m mm2 mm mm kN-m mm2 mm mm

0.997 19 8

1.329 25

279 Spacing Provided= Ast Min Ast req 180 180 279 Spacing Provided=

% steel 0.2 1.4 62

ReferFig 4. page 38 IS 456-2000 SAFE mm

tv = tc = b= b= tc*k =

=( 131+123 ) / 2 deff.avg. Wu (0.5Lx clear span -deff.avg.) =( 11.025+7.5 ) x ( 0.5x2.25-0.127) = 18.49 kN-m 18487.95/ (1000X127) = 0.15 N/mm2 0.85 x (0.80fck) ( 1+5b-1)/(6b) (0.8*fck)/(6.89pt)or 1 whichever is greter 17.02 tc = 0.31 0.4 > tv DL+ LL

127

k= SAFE

1.3

MAXIMUM SHORT TERM DEFLECTION: Mcr = fcr X Igr/ ( 0.5 X D ) fcr 0.7 X f Igr = ck = 3.50 MPa = = Mcr = 13.125 > 3.589 Mcr > M Hence Ieff = Igr maximum short term deflection 5 ML2 48 EIeff 0.30 mm =

As per Is 456:2000 Annex C

b X D^3/12 281250000.00 MPa KNm/m

(Uncracked Section)

DEFLECTION DUE TO SHRINKAGE: k3 k4 ecs L2/D Where K3 = 0.063 for fully continuous 0.72 X pt = K4 = 0.297 ecs = 0.0005 clause 6.2.4 and IS :1343 0.063 X 0.297 x 0.0005 X 2250 X 2250 / 150 0.32 mm =

Type < 1

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

DEFLECTION DUE TO CREEP: Considered For days 28 Ece = Ec /( 1+ q ) = 5000 X 25/ ( 1 + 1.6) 9615.38 MPa m= Es / Ece =200000 / 9615.38 $I$54*1e-02/($D$13*10) x 20.8 rm = 2 (rm ) + (rm )^2 - (rm ) k= 0.233 X 131 kd = b(kd)^3/3 + mAst(d-kd)^2 Icr = Igr = 1000 x D^3/12 Igr > Icr h = j ( 1- k ) ( bw / b ) Ieff. = Icr 1.2-(Mcr/MD+L) h Igr > Ieff
i+cp

Age Of Loading q 2.2 For days 7 1.6 For days 28 1.1 For days 365 = 20.80 = 0.036 = 0.233 = 30.52 mm 56390958.18 281250000 0.707 = 79975830.630

5 MD L2 48 Ece Ieff

= 1.46 mm = 0.95 mm

D+L

WDL WDL+WLL
i+cp

D+L

= 0.56 mm

cp

0.9 + 0.32

= 0.90 mm 1.22 mm 9.00 mm

Total Deflection = Allowable Deflection =

LX / 250

SAFE

Short Span Middle Strip = 3/4 ly= Long Span Middle Strip = 3/4 lx= REQUIRED DIAMETER & SACING OF BAR: SHORT SPAN 8 8

2613.75 1687.5

mm mm

Short Span Edge Strip = 1/8 ly= Long Span Edge Strip = 1/8 lx=

436 281

mm mm

Ast TOP Ast BOT

200 225

LONG SPAN 8 8

200 225

TWOWAY SLAB THICKNESS = 150 MM PROVIDE 8@200 MM C/C AS TOP REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@200 MM C/C AS TOP REINFORCEMENT ALONG LONG DIMENSION PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@225 MM C/C AS BOTTOM REINFORCEMENT ALONG LONG DIMENSION

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION 20 lx = ly = 415 1750

CRB AT DELHI FIRST FLOOR SLAB DESIGN N/mm

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

CONCRETE GRADE STEEL GRADE Length along short direction Length along long direction Span / Depth Ratio Assumed Cover for reinforcement Overall depth required Overall depth provided Dia of Bar (Short Dir.) Dia of Bar (Long Dir.) Effective depth of slab DEAD LOAD Self weight Ceiling load if any Additional Dead loads Floor finish Services TOTAL Factored Dead load LIVE LOAD LIVE LOAD TOTAL Factored Live load Ratio (lx / ly) 1.5 1.09 1.5

N/mm mm Two Way 1900 mm 20 20 mm 86 mm 100 mm 8 mm 8 mm dx = 76 dy = 68 Load (kN/m ) 2.5 0 1 0 0 3.5 5.25 kN/m2
2

SAFE IN DEPTH IN SHORT DIRECTION AS PER DEFLECTION CRITERIA

mm

Load (kN/m2) 0.75 0.75 1.125

` kN/m2 kN/m
2

Case
ly / lx ax -ve ax +ve Short Span Coeff 1.09 0 0.0632

9 Long Span Coeff 1.09 0 0.056

Table 26, Page 91. IS 456-2000 ly / lx ay -ve ay +ve

ALONG SHORT DIRECTION

DEAD LOAD LIVE LOAD

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar(required) Spacing of bar

0.000 0.063 0.000 0 8

0.000 0.063 0.000 0 Ast Min 120 Ast red 120 Ast pro 251 225 200 Ast pro 251 225 200 kN-m mm2 mm mm kN-m mm2 mm mm

1.016 37 8

0.218 8

228 Spacing Provided= Ast Min Ast red 120 120 228 Spacing Provided=

PROTHIOUS ENGINEERING SERVICES PVT. LTD.

JOB NO. JOB DESCRIPTION

CRB AT DELHI FIRST FLOOR SLAB DESIGN DEAD LOAD LIVE LOAD

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

ALONG LONG DIRECTION

ALPHA at continuous edge ALPHA at mid-span Negative moment at continuous edge Ast per meter width Diameter of bar Spacing of bar Positive moment at mid-span Ast per meter width Diameter of bar Spacing of bar CHECK FOR DEFLECTION: Fs 240 Modification factor : = Required depth = CHECK FOR SHEAR: Average Effective Depth = Vu
=

0 0.056 0.000 0 8

0 0.056 0.000 0 Ast Min 120 Ast req 120 Astpro 251 225 200 Astpro 251 225 200 kN-m mm2 mm mm kN-m mm2 mm mm

0.965 40 8

0.193 8

228 Spacing Provided= Ast Min Ast req 120 120 228 Spacing Provided=

0.34 % steel 0.34 1.41 62

ReferFig 4. page 38 IS 456-2000 SAFE mm

tv = tc = b= b= tc*k =

=( 76+68 ) / 2 deff.avg. Wu (0.5Lx clear span -deff.avg.) =( 5.25+1.125 ) x ( 0.5x1.75-0.072) = 5.12 kN-m 5119.125/ (1000X72) = 0.07 N/mm2 0.85 x (0.80fck) ( 1+5b-1)/(6b) (0.8*fck)/(6.89pt)or 1 whichever is greter 7.02 tc = 0.4 0.52 > tv DL+ LL b X D^3/12 83333333.33 MPa KNm/m

72

k= SAFE

1.3

MAXIMUM SHORT TERM DEFLECTION: Mcr = fcr X Igr/ ( 0.5 X D ) fcr 0.7 X fck Igr = = 3.13 MPa = = Mcr = 5.217 > 0.823 Mcr > M Hence Ieff = Igr maximum short term deflection 5 ML2 48 EIeff 0.14 mm =

As per Is 456:2000 Annex C

(Uncracked Section)

DEFLECTION DUE TO SHRINKAGE: k3 k4 ecs L2/D Where K3 = 0.063 for fully continuous 0.72 X pt = K4 = 0.414 ecs = 0.0005 clause 6.2.4 and IS :1343 0.063 X 0.414 x 0.0005 X 1750 X 1750 / 100

Type < 1

PROTHIOUS ENGINEERING SERVICES PVT. LTD. =

JOB NO. JOB DESCRIPTION 0.40 mm

CRB AT DELHI FIRST FLOOR SLAB DESIGN

DATE DESIGNED BY CHECKED BY

7-Feb-2012 D.M P.B.G

DEFLECTION DUE TO CREEP: Considered For days 28 Ece = Ec /( 1+ q ) = 5000 X 20/ ( 1 + 1.6) 8600.26 MPa m= Es / Ece =200000 / 8600.26 $I$54*1e-02/($D$13*10) x 23.26 rm = 2 (rm ) + (rm )^2 - (rm ) k= 0.323 X 76 kd = b(kd)^3/3 + mAst(d-kd)^2 Icr = Igr = 1000 x D^3/12 Igr > Icr h = j ( 1- k ) ( bw / b ) Ieff. = Icr 1.2-(Mcr/MD+L) h Igr > Ieff
i+cp

Age Of Loading q 2.2 For days 7 1.6 For days 28 1.1 For days 365 = 23.26 = 0.077 = 0.323 = 24.55 mm 20406745.2 83333333.33 0.604 = 26256748.839

5 MD L2 48 Ece Ieff

= 0.96 mm = 0.45 mm

D+L

WDL WDL+WLL
i+cp

D+L

= 0.37 mm

cp

0.59 + 0.4

= 0.59 mm 0.99 mm 7.00 mm

Total Deflection = Allowable Deflection =

LX / 250

SAFE

Short Span Middle Strip = 3/4 ly= Long Span Middle Strip = 3/4 lx= REQUIRED DIAMETER & SACING OF BAR: SHORT SPAN 8 8

1425 1312.5

mm mm

Short Span Edge Strip = 1/8 ly= Long Span Edge Strip = 1/8 lx=

238 219

mm mm

Ast TOP Ast BOT

200 200

LONG SPAN 8 8

200 200

TWOWAY SLAB THICKNESS = 100 MM PROVIDE 8@200 MM C/C AS TOP REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@200 MM C/C AS TOP REINFORCEMENT ALONG LONG DIMENSION PROVIDE 8@200 MM C/C AS BOTTOM REINFORCEMENT ALONG SHORT DIMENSION. PROVIDE 8@200 MM C/C AS BOTTOM REINFORCEMENT ALONG LONG DIMENSION

SHORT SPAN COEFFICIENTS ax ax -ve ax +ve ax -ve ax +ve ax -ve ax +ve ax -ve ax +ve ax -ve ax +ve ax -ve ax +ve ax -ve ax +ve ax -ve ax +ve ax -ve ax +ve 1 0.032 0.024 0.037 0.028 0.037 0.028 0.047 0.035 0.045 0.035 0 0.035 0.057 0.043 0 0.043 0 0.056 1.1 0.037 0.028 0.043 0.032 0.044 0.033 0.053 0.04 0.049 0.037 0 0.043 0.064 0.048 0 0.051 0 0.064 1.2 0.043 0.032 0.048 0.036 0.052 0.039 0.06 0.045 0.052 0.04 0 0.051 0.071 0.053 0 0.059 0 0.072 1.5 0.053 0.041 0.057 0.044 0.067 0.051 0.075 0.056 0.06 0.045 0 0.068 0.084 0.064 0 0.076 0 0.089 1.75 0.06 0.045 0.064 0.048 0.077 0.059 0.084 0.063 0.065 0.049 0 0.08 0.091 0.069 0 0.087 0 0.1 2 0.065 0.049 0.068 0.052 0.085 0.065 0.091 0.069 0.069 0.052 0 0.088 0.097 0.073 0 0.096 0 0.107

1 Interior Punels: 2 One Short Edge Continuous: 3 One long Edge Discontinuous: 4 Two Adjucent Edges Discontinuous: 5 Two Short Edges Discontinuous: 6 Two Long Edges Discontinuous: 7 Three Edges Discontinuous - L 8 Three Edges Discontinuous - S 9 Four-Edges Discontinuous: SHORT SPAN COEFFICIENTS ax Case ly/lx ax -ve ax +ve 1 1 0.032 0.024

F:\USER\RAM\3990\137698677.xls.ms_office

RR/ST

4/3/2013

LONG SPAN COEFFICIENTS ay

0.032 0.024 0.037 0.028 0.037 0.028 0.047 0.035 0 0.035 0.045 0.035 0 0.043 0.057 0.043 0 0.056 LONG SPAN COEFFICIENTS ay 1 1 0.032 0.024

F:\USER\RAM\3990\137698677.xls.ms_office

RR/ST

4/3/2013

Pt 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.17 0.18 0.19 0.20 0.21 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 0.50 0.51 0.52 0.53 0.54 0.55 0.56 0.57 0.58 0.59 0.60

290 1.6 1.58 1.56 1.54 1.52 1.5 1.48 1.46 1.44 1.42 1.40 1.38 1.36 1.34 1.32 1.3 1.28 1.26 1.24 1.22 1.20 1.20 1.19 1.19 1.18 1.18 1.17 1.17 1.16 1.16 1.15 1.14 1.13 1.12 1.11 1.10 1.09 1.08 1.07 1.06 1.05 1.04 1.03 1.03 1.02 1.01 1.00 0.99 0.99 0.98 0.97

240 2 1.97 1.94 1.91 1.88 1.85 1.82 1.79 1.76 1.73 1.70 1.68 1.65 1.63 1.60 1.58 1.55 1.53 1.50 1.48 1.45 1.44 1.43 1.42 1.41 1.40 1.39 1.38 1.37 1.36 1.35 1.34 1.32 1.31 1.29 1.28 1.26 1.25 1.23 1.22 1.2 1.20 1.19 1.19 1.18 1.18 1.17 1.17 1.16 1.16 1.15

190 2 2 2 2 2 2 2 2 2 2 2 1.98 1.96 1.94 1.92 1.90 1.88 1.86 1.84 1.82 1.8 1.79 1.78 1.77 1.76 1.75 1.74 1.73 1.72 1.71 1.7 1.68 1.66 1.64 1.62 1.60 1.58 1.56 1.54 1.52 1.5 1.49 1.48 1.47 1.46 1.45 1.44 1.43 1.42 1.41 1.4

145 2 2 2 2 2 2 2 2 2 2 2 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2 2.00 1.99 1.99 1.98 1.98 1.97 1.97 1.96 1.96 1.95 1.94 1.92 1.91 1.89 1.88 1.86 1.85 1.83 1.82 1.8

120 2 2 2 2 2 2 2 2 2 2 2 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2

290 0.945

0.61 0.62 0.63 0.64 0.65 0.66 0.67 0.68 0.69 0.70 0.71 0.72 0.73 0.74 0.75 0.76 0.77 0.78 0.79 0.80 0.81 0.82 0.83 0.84 0.85 0.86 0.87 0.88 0.89 0.90 0.91 0.92 0.93 0.94 0.95 0.96 0.97 0.98 0.99 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12

0.97 0.97 0.96 0.96 0.96 0.96 0.96 0.95 0.95 0.95 0.95 0.94 0.94 0.93 0.93 0.92 0.92 0.91 0.91 0.9 0.90 0.89 0.89 0.89 0.89 0.88 0.88 0.88 0.87 0.87 0.87 0.87 0.86 0.86 0.86 0.86 0.86 0.85 0.85 0.85 0.85 0.85 0.84 0.84 0.84 0.84 0.84 0.83 0.83 0.83 0.83 0.83

1.15 1.14 1.14 1.13 1.13 1.12 1.12 1.11 1.11 1.1 1.10 1.09 1.09 1.08 1.08 1.07 1.07 1.06 1.06 1.05 1.05 1.04 1.04 1.04 1.04 1.03 1.03 1.03 1.02 1.02 1.02 1.02 1.01 1.01 1.01 1.01 1.01 1.00 1.00 1 1.00 1.00 0.99 0.99 0.99 0.99 0.99 0.98 0.98 0.98 0.98 0.97

1.40 1.39 1.39 1.38 1.38 1.37 1.37 1.36 1.36 1.35 1.35 1.34 1.34 1.33 1.33 1.32 1.32 1.31 1.31 1.3 1.30 1.29 1.29 1.28 1.28 1.27 1.27 1.26 1.26 1.25 1.25 1.24 1.24 1.23 1.23 1.22 1.22 1.21 1.21 1.2 1.20 1.19 1.19 1.18 1.18 1.17 1.17 1.16 1.16 1.15 1.15 1.14

1.79 1.77 1.76 1.74 1.73 1.71 1.70 1.68 1.67 1.65 1.64 1.63 1.62 1.61 1.60 1.59 1.58 1.57 1.56 1.55 1.55 1.54 1.54 1.53 1.53 1.52 1.52 1.51 1.51 1.5 1.49 1.48 1.47 1.46 1.45 1.44 1.43 1.42 1.41 1.4 1.40 1.39 1.39 1.39 1.39 1.38 1.38 1.38 1.37 1.37 1.37 1.36

2.00 1.99 1.99 1.98 1.98 1.97 1.97 1.96 1.96 1.95 1.94 1.92 1.91 1.89 1.88 1.86 1.85 1.83 1.82 1.8 1.79 1.78 1.77 1.76 1.75 1.74 1.73 1.72 1.71 1.7 1.69 1.68 1.67 1.66 1.65 1.64 1.63 1.62 1.61 1.6 1.60 1.59 1.59 1.58 1.58 1.57 1.57 1.56 1.56 1.55 1.55 1.54

1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.21 1.22 1.23 1.24 1.25 1.26 1.27 1.28 1.29 1.30 1.31 1.32 1.33 1.34 1.35 1.36 1.37 1.38 1.39 1.40 1.41 1.42 1.43 1.44 1.45 1.46 1.47 1.48 1.49 1.50 1.51 1.52 1.53 1.54 1.55 1.56 1.57 1.58 1.59 1.60 1.61 1.62 1.63 1.64

0.82 0.82 0.82 0.82 0.82 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.80 0.80 0.80 0.80 0.8 0.80 0.80 0.79 0.79 0.79 0.79 0.79 0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.77 0.77 0.77 0.77 0.77 0.77 0.77 0.76 0.76 0.76 0.76 0.76 0.75 0.75 0.75 0.75 0.74 0.74 0.74

0.97 0.97 0.97 0.96 0.96 0.96 0.95 0.95 0.95 0.94 0.94 0.94 0.94 0.93 0.93 0.93 0.92 0.92 0.92 0.92 0.91 0.91 0.91 0.91 0.91 0.90 0.90 0.9 0.90 0.90 0.89 0.89 0.89 0.89 0.89 0.88 0.88 0.88 0.88 0.88 0.87 0.87 0.87 0.87 0.87 0.86 0.86 0.86 0.86 0.86 0.86 0.86

1.14 1.14 1.14 1.13 1.13 1.13 1.12 1.12 1.12 1.12 1.11 1.11 1.11 1.11 1.11 1.10 1.10 1.1 1.10 1.10 1.09 1.09 1.09 1.09 1.09 1.08 1.08 1.08 1.08 1.07 1.07 1.07 1.07 1.06 1.06 1.06 1.05 1.05 1.05 1.04 1.04 1.04 1.04 1.03 1.03 1.03 1.02 1.02 1.02 1.02 1.01 1.01

1.36 1.36 1.36 1.35 1.35 1.35 1.34 1.34 1.34 1.33 1.33 1.32 1.32 1.32 1.31 1.31 1.30 1.3 1.30 1.29 1.29 1.28 1.28 1.27 1.27 1.26 1.26 1.25 1.25 1.24 1.24 1.24 1.24 1.23 1.23 1.23 1.22 1.22 1.22 1.22 1.21 1.21 1.21 1.21 1.21 1.20 1.20 1.2 1.20 1.20 1.19 1.19

1.54 1.53 1.53 1.52 1.52 1.51 1.51 1.5 1.50 1.49 1.49 1.48 1.48 1.47 1.47 1.46 1.46 1.45 1.45 1.44 1.44 1.43 1.43 1.42 1.42 1.41 1.41 1.4 1.40 1.40 1.39 1.39 1.39 1.39 1.39 1.38 1.38 1.38 1.38 1.37 1.37 1.36 1.36 1.36 1.35 1.35 1.34 1.34 1.34 1.33 1.33 1.32

1.65 1.66 1.67 1.68 1.69 1.70 1.71 1.72 1.73 1.74 1.75 1.76 1.77 1.78 1.79 1.80 1.81 1.82 1.83 1.84 1.85 1.86 1.87 1.88 1.89 1.90 1.91 1.92 1.93 1.94 1.95 1.96 1.97 1.98 1.99 2.00 2.01 2.02 2.03 2.04 2.05 2.06 2.07 2.08 2.09 2.10 2.11 2.12 2.13 2.14 2.15 2.16

0.74 0.73 0.73 0.73 0.72 0.72 0.72 0.72 0.72 0.72 0.72 0.72 0.72 0.72 0.72 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.71 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70

0.86 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.83 0.83 0.83 0.83 0.83 0.83 0.83

1.01 1.01 1.01 1.00 1.00 1 1.00 1.00 1.00 1.00 1.00 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.98 0.98 0.98 0.98 0.98 0.98 0.98 0.98 0.98 0.98 0.98 0.97 0.97 0.97 0.97 0.97 0.97 0.97 0.97 0.97 0.97 0.96 0.96 0.96 0.96 0.96 0.96 0.96 0.96 0.96

1.19 1.19 1.19 1.18 1.18 1.18 1.18 1.18 1.18 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.16 1.16 1.16 1.16 1.16 1.16 1.16 1.16 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.14 1.14 1.14 1.14 1.14 1.14 1.14 1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.12 1.12 1.12 1.12 1.12 1.12 1.12

1.32 1.32 1.31 1.31 1.30 1.3 1.30 1.30 1.30 1.29 1.29 1.29 1.29 1.29 1.29 1.29 1.28 1.28 1.28 1.28 1.28 1.28 1.28 1.28 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.26 1.26 1.26 1.26 1.26 1.26 1.26 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.24 1.24 1.24 1.24 1.24 1.24 1.24

2.17 2.18 2.19 2.20 2.21 2.22 2.23 2.24 2.25 2.26 2.27 2.28 2.29 2.30 2.31 2.32 2.33 2.34 2.35 2.36 2.37 2.38 2.39 2.40 2.41 2.42 2.43 2.44 2.45 2.46 2.47 2.48 2.49 2.50 2.51 2.52 2.53 2.54 2.55 2.56 2.57 2.58 2.59 2.60 2.61 2.62 2.63 2.64 2.65 2.66 2.67 2.68

0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.69 0.68 0.68 0.68 0.68 0.68 0.68 0.68 0.68 0.68 0.68 0.68 0.68 0.68 0.68 0.68 0.68 0.68 0.68 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67 0.67

0.83 0.83 0.83 0.83 0.83 0.83 0.83 0.83 0.83 0.83 0.83 0.83 0.83 0.83 0.83 0.83 0.83 0.83 0.83 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.82 0.81 0.81 0.81 0.81 0.81 0.81 0.81

0.96 0.96 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.94 0.93 0.93 0.93 0.93 0.93 0.93 0.93 0.93 0.93 0.93 0.93 0.92 0.92 0.92 0.92 0.92 0.92 0.92 0.92 0.92 0.92 0.92 0.91 0.91 0.91 0.91 0.91 0.91

1.11 1.11 1.11 1.11 1.11 1.11 1.11 1.11 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.09 1.09 1.09 1.09 1.09 1.09 1.09 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.05 1.05 1.05 1.05 1.05 1.05 1.05 1.04

1.23 1.23 1.23 1.23 1.23 1.23 1.23 1.23 1.22 1.22 1.22 1.22 1.22 1.22 1.22 1.21 1.21 1.21 1.21 1.21 1.21 1.21 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.18 1.18 1.18 1.18 1.18 1.18 1.18 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.16

2.69 2.70 2.71 2.72 2.73 2.74 2.75 2.76 2.77 2.78 2.79 2.80 2.81 2.82 2.83 2.84 2.85 2.86 2.87 2.88 2.89 2.90 2.91 2.92 2.93 2.94 2.95 2.96 2.97 2.98 2.99 3.00

0.67 0.67 0.67 0.67 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.66 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65

0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.8

0.91 0.91 0.91 0.91 0.90 0.90 0.90 0.90 0.90 0.90 0.90 0.90 0.90 0.90 0.90 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.88 0.88 0.88 0.88 0.88 0.88

1.04 1.04 1.04 1.04 1.04 1.04 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.01 1.01 1.01 1.01 1.01 1.01 1.01 1.00 1.00 1.00 1

1.16 1.16 1.16 1.16 1.16 1.16 1.15 1.15 1.15 1.15 1.15 1.15 1.15 1.14 1.14 1.14 1.14 1.14 1.14 1.14 1.14 1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.12 1.12 1.12 1.12

0.71