Design and Analysis of RF Microwave Systems For Communications
Design and Analysis of RF Microwave Systems For Communications
Pradell Cara, Lluis A.Aguasca, I.Corbella, N.Duffo, J.O'Callaghan, J. Mateu, L. Pradell, F. Torres
- Electromagnetic theory : wave equation, TEM, TE and TM propagation, boundary conditions, concepts of energy and power, lossless and lossy media, good conductor - Transmision line parameters - Transmision line analysis under sinusoidal steady-state condition - Smith Chart applied to the calculation of transmision line impedances/admitances and reflection coefficients Requisits - Circuit theory (or equivalent) - Electromagnetic theory (or equivalent) - Radiation & guided waves (or equivalent) Metodologies docents - Individual resolution of theoretical exercises. - Group project consisting of design, implementation and measure of a microwave circuit/system such as an amplifier, using ADS/Momentum and da2 software tools. - Laboratory practice performed by groups. Objectius d'aprenentatge de l'assignatura - Introduction to specific techniques for the analysis of microwave circuits (S parameters) - Application to various passive and active subsystems, such as divider/combiner networks, filters, small-signal, largesignal and broadband amplifiers, oscillators and mixers - Introduction and application of software tools, such as ADS, to the analysis of microwave circuits. - Design, implementation (fabrication) and measurement of passive and active circuit examples - Theory and practical utilisation of basic laboratory instruments: network analyzer, spectrum analyzer and noise analyzer.
Continguts
1/6
1.1 Transmission line basic concepts and Microwave circuit analysis techniques
Descripci: Incident and reflected waves. Loads. Reflection coefficient. Power flow. Smith Chart Planar transmission lines. S-parameters. Generators: definition and properties. Biports: input reflection coefficient, gain. Other descriptions: ABCD and T parameters. Noise.
Descripci: Lumped elements, distributed elements, broadband networks, quarter-wave transformers, tapers
Descripci: Harmonic balance, system parameters (dynamic range, -1 dB compression point, third-order intermodulation, third-order interception point)
2. Passive networks
2/6
2.1 Filters
Descripci: Characteristic polynomials and scattering parameters, Synthesis circuit approach, synthesis of the coupling matrix, circuit transformation. Element transformation and frequency transformation. Design of Filters: Resonators, general theory of couplings, conventional topologies (Parallel connected resonators, combline filter, transmission line filters etc ), cross-coupled filters (cascaded quadruplets, triplets, folded topologies) Examples of planar filters. Multiplexers.
2.4 Microwave CAD (ADS): basics and passive circuit analysis (I)
Descripci: Basic analysis for passive networks.
2.5 Microwave CAD (ADS): basics and passive circuit analysis (II)
Descripci: Electromagnetic analysis
3/6
3. Active networks
4/6
Descripci: Noise analyzer: Basic operation and calibration Spectrum analyzer: Basic operation. Measurements: power, frequency, harmonics, intermodulation distortion and phase noise
4.3 Laboratory practice: network analyzer, noise Dedicaci: 2h analyzer spectrum analyzer Classes laboratori: 2h
5/6
Bibliografia Bsica:
Pozar, D.M. Microwave engineering. 3rd ed. John Wiley, 2005. ISBN 0471448788. Gonzlez, G. Microwave transistor amplifiers: analysis and design. 2nd ed. Prentice-Hall, 1997. ISBN 0132543354.
Complementria:
Bahl, I.; Bhartia, P. Microwave solid state circuit design. 2nd ed. John Wiley, 2003. ISBN 9780471207559. R. J. Cameron, R. Mansour, Ch. M. Kudsia. Microwave Filters for Communication Systems: Fundamentals, Design and Applications. John Wiley, 2007.
Altres recursos: Course notes and presentations corresponding to the different topics covered. Course notes are delivered to students registered in the course through the UPC Atenea digital campus (http://atenea.upc.edu:8080/moodle/ )
6/6