Scribd
Upload
533 views1 page

17-05 Dimensional Control

This 3 sentence summary provides the key details from the construction assessment checklist document: The document is a construction assessment checklist for dimensional control of GRE/FRP/HDPE piping during the experimental programme onshore processing facility subproject of the Kashagan development project by Agip KCO. It outlines 7 items to check including verifying safe work areas, dimensional measurement procedures and tools, dimensional data recording, certification of tools if required, fabrication stage, satisfaction of drawings, and sign off of the dimensional control data form. The checklist is for contractor and subcontractor representatives to accept or reject completed dimensional control work.

Uploaded by

Ryan Gillespie
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
533 views1 page

17-05 Dimensional Control

This 3 sentence summary provides the key details from the construction assessment checklist document: The document is a construction assessment checklist for dimensional control of GRE/FRP/HDPE piping during the experimental programme onshore processing facility subproject of the Kashagan development project by Agip KCO. It outlines 7 items to check including verifying safe work areas, dimensional measurement procedures and tools, dimensional data recording, certification of tools if required, fabrication stage, satisfaction of drawings, and sign off of the dimensional control data form. The checklist is for contractor and subcontractor representatives to accept or reject completed dimensional control work.

Uploaded by

Ryan Gillespie
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Company: Project: Subproject:

Agip KCO KashaganDevelopmentExperimentalProgramme OnshoreProcessingFacility

Construction Assessment Checklist


Checklist No: 17-05 Revision: 0 Activity: DIMENSIONAL CONTROL Discipline: 17 GRE/FRP/HDPE Piping

Site/Location: Contractor: Subcontractor:


Item Action

Report Number: Date: Component:


Results Accepted Yes No

!
1 2 3

Before commencing this surveillance. check the area is safe. If working at height does the scaffold have a green tag Record the Isometric number and spool drawing number Check that acceptable measuring procedures, devices, tools and qualified inspection personnel are being used Check that the dimensional data recorded is correct and legible, plus identified satisfactorily Check that the any tool requiring certification is certified Identify stage of survey ( prepared, bonded, assembled Check that the Spool piece satisfies the drawing Check that the fabricator signs off the dimensional control data form Accepted Rejected Completed by: Witnessed by:
(Contractor or Subcontractor Representative)

4 5 6 7

Date: Date:

(Explain below)

Deficiency Description: (What's wrong and why did it happen?)

Checklist No: 17-05

Activity DIMENSIONAL CONTROL

Page 1 of 1 01-Sept-08

You might also like