Scribd
Upload
69 views

End Term - Ans, Engineering Mechanics

This document contains exam questions and answers related to kinematics. It provides descriptive questions from Section B and C for a Kinematics exam. Section B asks to draw velocity and acceleration diagrams for a slider crank mechanism and find the velocity of slider B and angular accelerations of links AB and CD. Section C provides two optional questions on steering mechanisms, instantaneous centers of rotation in a slider crank mechanism, Paucellier straight line mechanism, compound epicyclic gear trains, relative acceleration equation for rigid bodies, and differences between rotary and radial engines.

Uploaded by

loverto1988
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views

End Term - Ans, Engineering Mechanics

This document contains exam questions and answers related to kinematics. It provides descriptive questions from Section B and C for a Kinematics exam. Section B asks to draw velocity and acceleration diagrams for a slider crank mechanism and find the velocity of slider B and angular accelerations of links AB and CD. Section C provides two optional questions on steering mechanisms, instantaneous centers of rotation in a slider crank mechanism, Paucellier straight line mechanism, compound epicyclic gear trains, relative acceleration equation for rigid bodies, and differences between rotary and radial engines.

Uploaded by

loverto1988
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Department of Mechanical Engineering, Rajiv Gandhi University of Knowledge Technologies, AP-IIIT-Nuzvid Campus, Krishna Dist., A. P.

KOM End Exam Descriptive Paper Answers:

Section B Time: 30 minutes Answer the following question.

Max. Marks: 10

1) Draw the velocity and acceleration diagrams for the given Fig.11. The link lengths of various links are: OA= 250 mm; AB = 1000 mm; OC=100 mm; CD=450 mm and QB = 600 mm. When the crank OA rotates in the clockwise direction at a uniform speed of 300 rpm; Find 1. Velocity of slider B, and 2. Angular accelerations of link AB and CD. [10 M]

Department of Mechanical Engineering, Rajiv Gandhi University of Knowledge Technologies, AP-IIIT-Nuzvid Campus, Krishna Dist., A. P.

Department of Mechanical Engineering, Rajiv Gandhi University of Knowledge Technologies, AP-IIIT-Nuzvid Campus, Krishna Dist., A. P. Section C Time: 30 minutes This section contains two questions. Answer any one. 2a) What is the condition for correct steering action for an automobile? Derive the condition for correct steering in the Davis Steering Gear Mechanism. [4M] Ans. Condition for correct steering action- 1M Derive the condition for correct steering in the Davis Steering Gear Mechanism3M Ans. Page No. 98 Kinematics by J S Rao Max. Marks: 10

2b) In a slider crank mechanism, the crank is 50 mm long and the connecting rod is 200 mm long. The crank makes an angle 450 with the inner dead centre. The crank is rotating with 1400 rpm in anticlockwise direction. Locate all the possible instantaneous centres of rotation for this. Find out the velocity of piston, angular velocity of connecting rod by instantaneous centre method. Also, find the velocity of centre of gravity of connecting rod which lies at 140 mm from small end of it. [4M]

Department of Mechanical Engineering, Rajiv Gandhi University of Knowledge Technologies, AP-IIIT-Nuzvid Campus, Krishna Dist., A. P.

Department of Mechanical Engineering, Rajiv Gandhi University of Knowledge Technologies, AP-IIIT-Nuzvid Campus, Krishna Dist., A. P.

2c) Show that Paucellier mechanism is an exact straight motion mechanism. [2 M] Ans. page No. 87 Kinematics by J S Rao For correct Mechanism Representation and Stating Exact straight motion condition 1M Equations and derivation 1M

3 a) In a compound epicyclic gear train as shown in the figure, has gears A and an annular gears D & E free to rotate on the axis P. B and C is a compound gear rotate about axis Q. Gear A rotates at 90 rpm CCW and gear D rotates at 450 rpm CW.

Department of Mechanical Engineering, Rajiv Gandhi University of Knowledge Technologies, AP-IIIT-Nuzvid Campus, Krishna Dist., A. P. Find the speed and direction of rotation of arm F and gear E. Gears A, B and C are having 18, 45 and 21 teeth respectively. All gears having same module and pitch. [5 M]

Department of Mechanical Engineering, Rajiv Gandhi University of Knowledge Technologies, AP-IIIT-Nuzvid Campus, Krishna Dist., A. P.

Department of Mechanical Engineering, Rajiv Gandhi University of Knowledge Technologies, AP-IIIT-Nuzvid Campus, Krishna Dist., A. P.

OR

Department of Mechanical Engineering, Rajiv Gandhi University of Knowledge Technologies, AP-IIIT-Nuzvid Campus, Krishna Dist., A. P.

Department of Mechanical Engineering, Rajiv Gandhi University of Knowledge Technologies, AP-IIIT-Nuzvid Campus, Krishna Dist., A. P. 3 b) Derive relative acceleration equation of two points on a rigid body? Ans. page No. 60 Kinematics by J S Rao 3c) Explain the differences between rotatory engine and radial engine? Ans. Page No. 30 Kinematics by J S Rao [2M] [3 M]

You might also like