DFSORT: ICETOOL Mini-User Guide

October, 2010

Frank L. Yaeger DFSORT Team IBM Systems Software Development San Jose, California Internet: [email protected]

DFSORT Web Site For papers, online books, news, tips, examples and more, visit the DFSORT home page at URL: http://www.ibm.com/storage/dfsort

ii

DFSORT/ICETOOL

Abstract
This paper is a mini-user guide for DFSORT's versatile ICETOOL data processing and reporting utility. The major features of ICETOOL for z/OS DFSORT V1R10 (used for z/OS 1.10 and z/OS 1.11) and z/OS DFSORT V1R12 (used for z/OS 1.12), including its JCL and control statements, are discussed at length using many examples. The objective is to show you how to use DFSORT's ICETOOL to accomplish complex tasks.

Abstract

iii

iv

DFSORT/ICETOOL

Contents
ICETOOL Mini-User Guide 1 Introduction 1 Additional Sources for ICETOOL Examples 1 What Can ICETOOL Do? 2 General ICETOOL Job Format 4 Required JCL Statements 4 ICETOOL Operator Statement Syntax 4 Operator Statements 4 Comment Statements 5 Blank Statements 5 ICETOOL Return Codes 5 ICETOOL Job with all Operators 6 COPY Operator Details 11 Syntax 11 Function 11 Examples 11 Required Operands 12 Optional Operands 12 Note 12 Example of TOOLMSG Output for COPY 12 COUNT Operator Details 13 Syntax 13 Function 13 Examples 13 Required Operand 14 Optional Operands 14 Symbols 14 Notes 15 Example of TOOLMSG Output for COUNT 15 Example of Using COUNT to Set RC=12 or RC=0 15 Example of Using COUNT to Set RC=4 or RC=0 15 DATASORT Operator Details 16 Syntax 16 Function 16 Examples 16 Required Operands 16 Optional Operands 16 Symbols 17 Notes 17 Example of TOOLMSG Output for DATASORT 17 DEFAULTS Operator Details 18 Syntax 18 Function 18 Examples 18 Required Operand 18 Optional Operands 19 Notes 19 Example of TOOLMSG Output for DEFAULTS 19 Example of List Output for DEFAULTS 19 DISPLAY Operator Details 20
Contents

Syntax 20 Function 20 Examples 21 Required Operands 22 Optional Operands 24 Symbols 25 Notes 26 Example of TOOLMSG Output for DISPLAY 27 Example of List Output for DISPLAY 27 Example using OUTFIL Lookup and Change with DISPLAY Example of Lookup and Change with DISPLAY Output 28 Example of Plain and Fancy Reports 29 Example of Plain Report Output 30 Example of Fancy Report Output 30 MERGE Operator Details 31 Syntax 31 Function 31 Example 31 Required Operands 31 Optional Operands 31 Note 31 Example of TOOLMSG Output for MERGE 32 MODE Operator Details 32 Syntax 32 Function 32 Examples 32 Required Operand 32 Note 32 Example of TOOLMSG Output for MODE 32 OCCUR Operator Details 34 Syntax 34 Function 34 Examples 35 Required Operands 35 Optional Operands 37 Symbols 38 Notes 38 Example of TOOLMSG Output for OCCUR 40 Example of List Output for OCCUR 40 Example of HIGHER with OCCUR 40 Example of HIGHER with OCCUR Output 40 RANGE Operator Details 41 Syntax 41 Function 41 Examples 41 Required Operands 41 Optional Operand 42 Symbols 42 Note 42 Example of TOOLMSG Output for RANGE 42 RESIZE Operator Details 43 Syntax 43 Function 43 Examples 43

28

vi

DFSORT/ICETOOL

Required Operands 43 Optional Operand 43 Notes 43 Example of TOOLMSG Output SELECT Operator Details 44 Syntax 44 Function 44 Examples 44 Required Operands 45 Optional Operands 45 Symbols 46 Notes 46 Example of TOOLMSG Output SORT Operator Details 47 Syntax 47 Function 47 Examples 47 Required Operands 48 Optional Operands 48 Notes 48 Example of TOOLMSG Output SPLICE Operator Details 49 Syntax 49 Function 49 Examples 49 Required Operands 50 Optional Operands 50 Symbols 51 Notes 51 Example of TOOLMSG Output STATS Operator Details 52 Syntax 52 Function 52 Examples 52 Required Operands 52 Optional Operand 52 Symbols 53 Note 53 Example of TOOLMSG Output SUBSET Operator Details 54 Syntax 54 Function 54 Examples 54 Required Operands 54 Optional Operands 55 Symbols 55 Notes 55 Example of TOOLMSG Output UNIQUE Operator Details 56 Syntax 56 Function 56 Examples 56 Required Operands 56 Optional Operands 56

for RESIZE

43

for SELECT

46

for SORT

48

for SPLICE

51

for STATS

53

for SUBSET

55

Contents

vii

Symbols 56 Notes 57 Example of TOOLMSG Output for UNIQUE VERIFY Operator Details 58 Syntax 58 Function 58 Examples 58 Required Operands 58 Optional Operands 58 Symbols 58 Notes 59 Example of TOOLMSG Output for VERIFY Symbol Processing 60 Calling ICETOOL from a Program 61

57

59

Appendix A. Edit Masks for DISPLAY and OCCUR Formatting

63

viii

DFSORT/ICETOOL

ICETOOL Mini-User Guide

Introduction
ICETOOL, a versatile data set processing and reporting utility, provides an easy-to-use batch front-end for DFSORT. ICETOOL combines new features with previously available DFSORT features to perform complex sorting, copying, merging, reporting and analytical tasks using multiple data sets in a single job step. ICETOOL was first introduced in DFSORT Release 11.1 and was significantly enhanced in each subsequent DFSORT release. The many enhancements to ICETOOL through October, 2010 are reflected in this paper. This paper is a mini-user guide for ICETOOL. The major features of ICETOOL for z/OS DFSORT V1R10 (used for z/OS 1.10 and z/OS 1.11) and z/OS DFSORT V1R12 (used for z/OS 1.12), including its JCL and control statements, are discussed at length using many examples. The objective is to show you how to use DFSORT's ICETOOL to accomplish complex tasks. Complete information on ICETOOL's JCL, control statements, restrictions, and calling program interface can be found in DFSORT Application Programming Guide (SC26-7523). "Examples of DFSORT Job Streams" in DFSORT Application Programming Guide contains a sample ICETOOL job that shows how ICETOOL can be used to perform complex tasks using multiple operations and data sets in a single step, along with a complete explanation of the job. Complete information on ICETOOL's messages and return codes can be found in DFSORT Messages, Codes and Diagnosis Guide (SC26-7525). Complete information on the newest features of ICETOOL can be found in the User Guide for DFSORT PTFs UK90025 and UK90026 paper. You can access all of these documents online by clicking the Publications link on the DFSORT home page at URL: http://www.ibm.com/storage/dfsort

Additional Sources for ICETOOL Examples

The DFSORT home page on the World Wide Web at URL: http://www.ibm.com/storage/dfsort DFSORT Application Programming Guide (SC26-7523) DFSORT: Getting Started (SC26-7527) z/OS DFSMSrmm Reporting (SC26-7406) z/OS DFSMShsm Data Recovery Scenarios (GC35-0419) z/OS SecureWay Security Server RACF Auditor's Guide (SA22-7684) z/OS SecureWay Security Server RACF Security Administrator's Guide (SA22-7683) RACFICE2 describes a technique for analyzing RACF data using ICETOOL. You can obtain RACFICE2 at: www.ibm.com/systems/z/os/zos/features/racf/downloads/racfice.html

ICETOOL Mini-User Guide

The DFSORT product tape contains a set of illustrative examples of interest to Storage Administrators and others who analyze data created by DFHSM, DFSMSrmm, DCOLLECT and SMF. The source for the following examples are available in sample job ICESTGEX: DCOLEX1 - DCOLLECT Example 1: VSAM report DCOLEX2 - DCOLLECT Example 2: Conversion reports DCOLEX3 - DCOLLECT Example 3: Capacity planning analysis and reports DFHSMEX1 - DFHSM Example 1: Deciphering Activity Logs DFHSMEX2 - DFHSM Example 2: Recover a DFHSM CDS with a broken index RMMEX1 - DFSMSrmm Example 1: SMF audit report RMMEX2 - DFSMSrmm Example 2: Create ADDVOLUME commands ICESTGEX is also available via anonymous FTP from: ftp.software.ibm.com/storage/dfsort/mvs/

What Can ICETOOL Do?

ICETOOL is a versatile DFSORT utility that allows you to perform multiple operations on one or more data sets in a single job step. ICETOOL uses the capabilities of DFSORT to perform the operations you request, calling DFSORT for each operation with the particular DFSORT control statements and options required. The 17 ICETOOL operators, each of which can be used one or more times in a single run, allow you to perform a variety of functions such as: Displaying statistical information for selected numeric fields, such as minimum, maximum, average, total, count of values within a range and count of unique values. This makes it easy to extract frequently used analytical data. Displaying list data sets showing character (up to 4000 bytes) and numeric fields in a variety of report formats, allowing control of title, date, time, page numbers, carriage control characters, headings, lines per page, field formats, and total, maximum, minimum, average and count values for the columns of numeric data. This makes it easy to create simple, tailored and sectioned reports. Identifying and displaying invalid decimal values and their locations in a data set. This makes it easy to avoid using invalid fields for other operations or steps. Creating multiple copies of sorted, merged, edited, or unedited data sets. This makes it easy to create several identical data set copies. Sorting records between headers and trailers. This makes it easy to keep headers and trailers in place while sorting the data records between them. Creating output data sets containing different subsets or field arrangements of input data sets. This makes it easy to view data in many different ways. Creating a larger record from multiple shorter records, or multiple shorter records from a larger record. This makes it easy to "resize" fixed length records. Displaying a list data set showing the DFSORT installation defaults selected at your site. This makes it easy to determine the options selected and accepted for all eight installation environments.

DFSORT/ICETOOL

Creating output data sets and displaying list data sets for records with duplicate values, non-duplicate values, or values that occur n times, less than n times, or more than n times. This makes it easy to view data according to occurrences of values. Creating list data sets showing unique values for selected character and numeric fields and the number of times each occurs, in a variety of report formats. This makes it easy to obtain reports based on occurrences of values. Creating output data sets with information spliced together from two or more input records with duplicate values. The information in the input records can originate from different data sets. This makes it easy to perform various file "join" and "match" operations. Displaying the count of records in a data set, or creating an output data set containing an output record with text and the count of records. This makes it easy to determine the number of records in a data set or in a subset of a data set. Setting RC=12, RC=8, RC=4 or RC=0 based on the count of records in a data set. This makes it easy to avoid using data sets that are empty, not empty or contain a certain number of records, for other operations or steps. Allowing operations to be performed or suppressed based on the success or failure of previous operations. This makes it easy to group operations according to the action to be taken after an error. You can use ICETOOL for SORT, COPY and MERGE applications. ICETOOL can be called directly or from a program. Operators can be supplied in a data set. Alternatively, operators can be supplied by a calling program parameter list, in which case ICETOOL returns information for each operation in the parameter list. In either case, ICETOOL prints messages and gives a return code for each operation. The 17 ICETOOL operators are: COPY, COUNT, DATASORT, DEFAULTS, DISPLAY, MERGE, MODE, OCCUR, RANGE, RESIZE, SELECT, SORT, SPLICE, STATS, SUBSET, UNIQUE and VERIFY. By using combinations of these 17 operators, you can easily create applications that perform many complex tasks. By supplying these operators in a parameter list, you can use the information returned by ICETOOL in your program.

ICETOOL Mini-User Guide

General ICETOOL Job Format

Here's a representation of an ICETOOL job: //EXAMP JOB ... //TOOL EXEC PGM=ICETOOL //TOOLMSG DD SYSOUT=A //DFSMSG DD SYSOUT=A //TOOLIN DD * <ICETOOL statements go here> /* <Additional JCL statements go here>

Required JCL Statements

EXEC PGM=ICETOOL - to use ICETOOL directly. TOOLMSG - ICETOOL message data set. This data set has the same attributes as the DFSORT SYSOUT data set. DFSMSG - DFSORT message data set. This data set has the same attributes as the DFSORT SYSOUT data set. TOOLIN - ICETOOL statements. This data set has the same attributes as the DFSORT SYSIN data set. Additional JCL - as required for operators you specify.

ICETOOL Operator Statement Syntax

Operator Statements
Each ICETOOL operator statement describes a task you want ICETOOL to perform. Any number of operators can be specified and in any order. The general format for all ICETOOL statements is: operator operand ... operand Example: COPY FROM(IN) TO(OUT1,OUT2) operator is one of the sixteen ICETOOL operator names. operand is keyword or keyword(parameter,...) One or more blanks can be used before the operator and between operands. Columns 1-72 are scanned; columns 73-80 are ignored. Continuation can be indicated by a dash (-) after the operator or any operand. Each operand must be completely specified on one line. Example: SORT FROM(IN1) TO(OUT1,OUT2,OUT3) USING(ABCD)

DFSORT/ICETOOL

Comment Statements
Asterisk (*) in column 1 indicates a comment statement. Comment statements are printed with other ICETOOL statements, but otherwise ignored.

Blank Statements
Blank in columns 1-72 indicates a blank statement. Blank statements are ignored since ICETOOL prints blank lines where appropriate.

ICETOOL Return Codes

ICETOOL sets a return code for each operation it performs. For the step, ICETOOL sets the return code to the highest operator return code. The return codes are: 0 - Successful completion. No errors were detected. 4 - Successful completion. DFSORT detected one or more warning conditions, or RC4 was used for COUNT and the criteria was met. 8 - Unsuccessful completion. RC8 was used for COUNT and the criteria was met. 12 - Unsuccessful completion. ICETOOL detected one or more errors, or RC12 was used (or defaulted) for COUNT and the criteria was met. 16 - Unsuccessful completion. DFSORT detected one or more errors. 20 - Message data set error. The TOOLMSG DD statement was not present or the TOOLMSG data set was not opened. 24 - Unsupported operating system. This operating system is not supported by this release of DFSORT.

ICETOOL Mini-User Guide

ICETOOL Job with all Operators

Here's a sample ICETOOL job that briefly explains the function of each ICETOOL operator and shows a simple example of its use. Later pages explain each operator in the job and its parameters (required and optional), and show the TOOLMSG messages produced for each operator.

DFSORT/ICETOOL

//EXAMP JOB ... //* JCL REQUIRED FOR ALL ICETOOL JOBS //TOOL EXEC PGM=ICETOOL //TOOLMSG DD SYSOUT=A //DFSMSG DD SYSOUT=A //TOOLIN DD * * ICETOOL Operators - brief explanations and simple examples * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * COPY - copies a data set to one or more output data sets. Multiple output is handled using a single pass over the input. Example: copy the N data set to the DASD, PRINT and TAPE data sets. COPY FROM(N) TO(DASD,PRINT,TAPE) COUNT - prints a message in TOOLMSG containing the count of records in a data set. Can also be used to create an output data set containing text and the count, or to set RC=12, RC=8, RC=4 or RC=0 based on the count of records in a data set. Example: print a count of the number of records in the IN2 data set. COUNT FROM(IN2) DATASORT - sorts data records between header and trailer records in a data set to an output data set. Example: sort the IN3 data set to the SRT1 data set keeping the header record and two trailer records in place. Uses the DFSORT SORT statement in the SRT1CNTL data set to sort the data records. DATASORT FROM(IN3) TO(SRT1) HEADER TRAILER(2) USING(SRT1) DEFAULTS - prints the DFSORT installation defaults in a separate list data set. Example: print the JCL, INV, TSO, TSOINV, TD1, TD2, TD3 and TD4 installation defaults selected, in the INSTDEF data set DEFAULTS LIST(INSTDEF) DISPLAY - prints the values and characters of specific numeric and character fields in a separate list data set. Simple, tailored or sectioned reports can be produced. Maximums, minimums, totals, averages and counts can be produced. Example: print a tailored report showing values from the three IN2 data set ON fields, with title, heading lines, maximum, minimum and count, in the DOUT data set. DISPLAY FROM(IN2) LIST(DOUT) BLANK TITLE('IN2 Data Set Report') PAGE DATE TIME HEADER('Store') ON(50,15,CH) HEADER('Profit/(Loss)') ON(26,8,ZD,E1) HEADER('Employees') ON(2,3,ZD) MAXIMUM('Largest') MINIMUM('Smallest') COUNT('Number of stores') EDCOUNT(U03)

ICETOOL Mini-User Guide

* * * * * * * * * * * * * * * * *

MERGE - merges one or more data sets to one or more output data sets. Example: merge the IN01, IN02 and IN03 data sets to the MRGOUT output data set using the DFSORT control statements in the MRG1CNTL data set. MERGE FROM(IN01,IN02,IN03) TO(MRGOUT) USING(MRG1) MODE - specifies the error checking and actions after error detection to be performed for a group of operators. Example: continue processing operators whether or not an error is detected. MODE CONTINUE OCCUR - prints each unique value for specified numeric and character fields and how many times it occurs in a separate list data set. Simple or tailored reports can be produced. The values printed can be limited to those for which the value meets specified criteria (e.g. only duplicate values). Example: print a report showing values from the IN1 data set ON field, with the number of times each value occurs, in the LIST1 data set. OCCUR FROM(IN1) LIST(LIST1) TITLE('Dep''t Counts') ON(35,3,CH) ON(VALCNT) RANGE - prints a message in TOOLMSG containing the count of values in a specified range for a specified numeric field in a data set. Example: print a count of the values in the IN2 data set ON field that are higher than -50, but lower than +100. RANGE FROM(IN2) ON(20,2,PD) HIGHER(-50) LOWER(100) RESIZE - creates larger records from smaller records, or smaller records from larger records. Example: create 40 byte output records from 10 byte input records. RESIZE FROM(L10) TO(L40) TOLEN(40) SELECT - selects records from a data set for inclusion in an output data set based on meeting criteria for the number of times specified numeric or character field values occur (e.g. only duplicate values). Records that are not selected can be saved in a separate output data set. Example: selects records from the IN1 data set, for the SEL1 data set, whose ON field occurs only once (i.e, only records with no duplicate ON field values). SELECT FROM(IN1) TO(SEL1) ON(30,2,PD) NODUPS SORT - sorts a data set to one or more output data sets. Multiple output is handled using a single pass over the input. Example: sort the IN1 data set to the OUT1 data set using the DFSORT control statements in the CTL1CNTL data set. SORT FROM(IN1) TO(OUT1) USING(CTL1)

* * * * * * * * * * * * * * * * * * * * * * *

DFSORT/ICETOOL

* * * * * * * * * * * * * * * * * * * * * * * * * *

SPLICE - splices together specified fields from records that have the same specified numeric or character field values (i.e., duplicate values), but different information. Specified fields from two or more records can be combined to create an output record. The fields to be spliced can originate from records in different data sets, so various "join" and "match" operations can be performed. Example: for ON fields that occur more than once (i.e., duplicate ON field values) in the CONCT data set, splices the WITH field from the last duplicate record into the first duplicate record. SPLICE FROM(CONCT) TO(COMBINE) ON(11,5,CH) WITH(41,20) STATS - prints messages in TOOLMSG containing the minimum, maximum, average, and total for specified numeric fields in a data set. Example: print the minimum, maximum, average and total values for the three VLRIN data set ON fields. For variable-length records, ON(VLEN) gives statistics about the length of the records. STATS FROM(VLRIN) ON(VLEN) ON(12,2,ZD) ON(18,5,FS) SUBSET - selects records from a data set based on keeping or removing header records (the first n records), relative records, or trailer records (the last n records). Records that are not selected can be saved in a separate output data set. Example: Copies records 5, 21 and 31-33 from the IN1 data set to the SUB1 data set. SUBSET FROM(IN1) TO(SUB1) INPUT KEEP RRN(5) RRN(21) RRN(31,33) UNIQUE - prints a message in TOOLMSG containing the count of unique values for a specified numeric or character field. Example: print the count of unique values in the OUT1 data set ON field. UNIQUE FROM(OUT1) ON(30,2,PD) VERIFY - examines specified decimal fields in a data set and prints a message in TOOLMSG identifying each invalid value found for each field. Example: identify all values in the two IN2 data set decimal ON fields that have invalid digits (A-F) and/or invalid signs (0-9). VERIFY FROM(IN2) ON(10,2,ZD) ON(41,6,PD)

* * * * * * * * * *

/* //* JCL REQUIRED FOR THE SPECIFIED OPERATORS //N DD DSN=Y897797.NAMES,DISP=SHR //DASD DD DSN=Y897797.OUT.COPY,DISP=OLD //PRINT DD SYSOUT=A

ICETOOL Mini-User Guide

//TAPE DD DSN=TAPE1,UNIT=3490,DISP=(,KEEP),VOL=SER=VOL001, // LABEL=(,SL) //INSTDEF DD SYSOUT=A //IN2 DD DSN=Y897797.FIXED2.IN,DISP=SHR //IN3 DD DSN=Y897797.FIXED3.IN,DISP=SHR //L10 DD DSN=Y897797.FIXED.L10,DISP=SHR //SRT1 DD DSN=&&SRT1,DISP=(,PASS),SPACE=(TRK,(5,5)),UNIT=SYSDA //SRT1CNTL DD * SORT FIELDS=(11,10,CH,A) /* //DOUT DD SYSOUT=A //IN1 DD DSN=Y897797.FIXED1.IN,DISP=SHR //LIST1 DD SYSOUT=A //SEL1 DD DSN=&&SEL1,DISP=(,PASS),SPACE=(TRK,(5,5)),UNIT=SYSDA //L40 DD DSN=Y897797.FIXED.L40,DISP=OLD //OUT1 DD DSN=&&TEMP,DISP=(,PASS),SPACE=(TRK,(5,5)),UNIT=SYSDA //CTL1CNTL DD * SORT FIELDS=(35,3,CH,A) OMIT COND=(35,3,SS,EQ,C'J82,D54') /* //CONCT DD DSN=Y897797.BASE.IN,DISP=SHR // DD DSN=Y897797.OVERLAY.IN,DISP=SHR //COMBINE DD DSN=Y897797.COMBINE.OUT,DISP=(NEW,CATLG,DELETE), // SPACE=(CYL,(5,5)),UNIT=SYSDA //VLRIN DD DSN=Y897797.VARIABLE.IN,DISP=SHR //SUB1 DD DSN=&&SUB1,DISP=(,PASS),SPACE=(TRK,(5,5)),UNIT=SYSDA //IN01 DD DSN=Y897797.MERGEIN1,DISP=SHR //IN02 DD DSN=Y897797.MERGEIN2,DISP=SHR //IN03 DD DSN=Y897797.MERGEIN3,DISP=SHR //MRGOUT DD SYSOUT=A //MRG1CNTL DD * OPTION EQUALS MERGE FIELDS=(21,4,CH,A) /*

10

DFSORT/ICETOOL

COPY Operator Details

Syntax
COPY FROM(indd) TO(outdd,...) USING(xxxx) VSAMTYPE(x) JKFROM LOCALE(name) SERIAL LOCALE(CURRENT) LOCALE(NONE)

Function
Copies the indd data set to the outdd data sets (up to 10). The DFSORT control statements in xxxxCNTL are used if USING(xxxx) is specified. DFSORT control statements and options can be used to copy a subset of the input records (INCLUDE or OMIT statement; SKIPREC and STOPAFT options; OUTFIL INCLUDE, OMIT, SAVE, STARTREC, ENDREC, ACCEPT, SAMPLE, SPLIT, SPLITBY and SPLIT1R operands), reformat records for output (INREC, OUTREC and OUTFIL), and so on. See DFSORT Application Programming Guide for complete details of DFSORT control statements and options.

Examples
COPY FROM(IN1) TO(NEW,BACKUP) USING(CTL1) COPY FROM(VSAMIN) TO(VSAMOUT) VSAMTYPE(V) COPY FROM(MASTER) USING(OUTF) COPY JKFROM TO(JOUT) USING(CTL2) CTL1CNTL might contain the following: //CTL1CNTL DD * OMIT COND=(28,5,PD,NE,NUM) /* Note the use of DFSORT's non-numeric test feature to OMIT records with invalid PD values. Complete details on this feature of INCLUDE/OMIT can be found in DFSORT Application Programming Guide. OUTFCNTL might contain the following: //OUTFCNTL DD * OUTFIL FNAMES=FMT1,BUILD=(C'SUB1',32,15,2Z,1,3,PD) OUTFIL FNAMES=FMT2,BUILD=(C'SUB2',16,2,BI,M1,C'**',32,15) /* Note that DFSORT's OUTFIL BUILD feature is used here to create two output data sets with different field arrangements using a single pass over the input data set. Complete details on this feature of OUTFIL as well as its many other features can be found in DFSORT Application Programming Guide. CTL2CNTL might contain the following:

ICETOOL Mini-User Guide

11

//CTL2CNTL JOINKEYS JOINKEYS REFORMAT /*

DD * F1=IN1,FIELDS=(5,12,A) F2=IN2,FIELDS=(11,12,A) FIELDS=(F1:4,40,F2:15,20)

Note the use of JKFROM to indicate a JOINKEYS application for the COPY operator (JOINKEYS and REFORMAT in CTL2CNTL). Complete details on JOINKEYS applications can be found in DFSORT Application Programming Guide.

Required Operands
FROM or JKFROM FROM - the ddname of the input data set. You must supply a DD statement for the ddname you specify. JKFROM - used for a JOINKEYS application. You must provide a USING(xxxx) operand. In xxxxCNTL, you must provide a JOINKEYS statement with F1=ddname1 for the F1 file and a JOINKEYS statement with F2=ddname2 for the F2 file, as well as JOIN and REFORMAT statements as needed. TO - the ddnames of 1 to 10 output data sets. You must supply DD statements for the ddnames you specify. TO, USING, or TO and USING must be specified. USING - the first 4 characters of the ddname (xxxxCNTL) for the DFSORT control statement data set. You must supply a DD statement for xxxxCNTL if you specify USING(xxxx). TO, USING, or TO and USING must be specified.

Optional Operands
VSAMTYPE - the record format for a VSAM input data set (F or V). LOCALE - overrides the installation default for locale processing. SERIAL - causes OUTFIL processing not to be used for multiple outdd data sets. SERIAL is not recommended because it imposes data set restrictions and can degrade performance.

Note
If you use OUTFIL statements in xxxxCNTL to specify your output data sets, you do not need to specify TO.

Example of TOOLMSG Output for COPY

COPY - copies a data set to one or more output data sets. Multiple output is handled using a single pass over the input. Example: copy the N data set to the DASD, PRINT and TAPE data sets. COPY FROM(N) TO(DASD,PRINT,TAPE) ICE627I 0 DFSORT CALL 0001 FOR COPY FROM N TO OUTFIL COMPLETED ICE602I 0 OPERATION RETURN CODE: 00 Note that DFSORT's OUTFIL multiple output feature is used automatically to create the three output data sets with a single pass over the input data set. * * * * *

12

DFSORT/ICETOOL

COUNT Operator Details

Syntax
COUNT FROM(indd) USING(xxxx) VSAMTYPE(x) LOCALE(name) LOCALE(CURRENT) LOCALE(NONE) EMPTY RC4 SUB(q) WRITE(countdd) TEXT('string') NOTEMPTY RC8 ADD(r) HIGHER(x) RC12 LOWER(y) EQUAL(v) NOTEQUAL(w) DIGITS(d) WIDTH(n) EDCOUNT(formatting)

Function
Prints a message in TOOLMSG containing the count of records in the indd data set. The DFSORT control statements in xxxxCNTL are used if USING(xxxx) is specified. The INCLUDE or OMIT statement can be used to count a subset of the input records. COUNT can also be used to: subtract a value from the count add a value to the count create an output data set containing text and the count, or just the count set RC=12, RC=8 or RC=4 if the record count meets specified criteria (that is, empty, not empty, n records, not n records, more than n records or less than n records), or RC=0 if the record count does not meet specified criteria.

Examples
COUNT FROM(IN1) COUNT FROM(INPUT5) EMPTY COUNT FROM(MASTER) HIGHER(50000) RC4 COUNT FROM(UPDATE2) NOTEMPTY SUB(2) COUNT FROM(IN1) USING(PDAT) WRITE(CT) TEXT('Count is') DIGITS(6) PDATCNTL might contain the following: //PDATCNTL DD * INCLUDE COND=(15,7,CH,EQ,DATE3-1) /* Note the use of DFSORT's past date feature to INCLUDE records with yesterday's date in the form yyyyddd. Complete details on this feature of INCLUDE/OMIT can be found in DFSORT Application Programming Guide.
ICETOOL Mini-User Guide

13

Required Operand
FROM - the ddname of the input data set. You must supply a DD statement for the ddname you specify.

Optional Operands
USING - the first 4 characters of the ddname (xxxxCNTL) for the DFSORT control statement data set. You must supply a DD statement for xxxxCNTL if you specify USING(xxxx). VSAMTYPE - the record format for a VSAM input data set (F or V). LOCALE - overrides the installation default for locale processing. EMPTY, NOTEMPTY, HIGHER, LOWER, EQUAL, NOTEQUAL - defines the criteria against which the record count is to be matched. If the criteria is met, ICETOOL sets RC=4 if RC4 is specified, RC=8 if RC8 is specified, or RC=12 if RC12 is specified or by default. If the criteria is not met, ICETOOL sets RC=0 for this COUNT operator. x, y, v, and w must be specified as n or +n where n can be 0 to 562949953421310. RC4 - sets RC=4 if the criteria is met (overriding the default of RC=12). RC8 - sets RC=8 if the criteria is met (overriding the default of RC=12). RC12 - sets RC=12 if the criteria is met (same as the default of RC=12). SUB - subtracts a value from the record count. If SUB reduces the record count below 0, the record count is set to 0. q must be specified as n or +n where n can be 1 to 999. ADD - adds a value to the record count. r must be specified as n or +n where n can be 1 to 999. WRITE - the ddname of the count data set. You must supply a DD statement for the ddname you specify. TEXT - a string to be printed before the count in the count data set (overriding the default of just printing the count). The string can be 1 to 50 characters. DIGITS - the number of digits for the count in the count data set (overriding the default of 15). d can be 1 to 15. EDCOUNT - specifies how the count is to be formatted for printing. The following formatting items can be used (see DFSORT Application Programming Guide for complete details): mask, E'pattern', L'string', F'string', T'string', LZ and Udd. WIDTH - the record length and LRECL for the count data set. n can be 1 to 32760. If the WIDTH specified is greater than the calculated record length, ICETOOL pads the count record on the right with blanks to the specified record length. If the WIDTH specified is less than the calculated record length, ICETOOL terminates the operation. If WIDTH is not specified, the calculated record length is used as the record length and LRECL for the count data set.

Symbols
A symbol for a character constant can be used instead of 'string' in the TEXT operand. Symbols for decimal constants can be used instead of n and +n in the HIGHER, LOWER, EQUAL, NOTEQUAL, SUB and ADD operands.

14

DFSORT/ICETOOL

Notes
The record count is also printed for the DISPLAY, OCCUR, RANGE, SELECT, STATS, UNIQUE, and VERIFY operators. You can use COUNT to set RC=12 or RC=8 based on the record count to stop other operations or steps from executing. When you specify one of the criteria operands, ICETOOL does not print the record count, and it uses DFSORT's STOPAFT option to process the minimum number of records required to determine whether or not the criteria is met. RECFM=FB is used for the count data set. SUB(q) and ADD(r) are useful for input data sets with header or trailer records.

Example of TOOLMSG Output for COUNT

COUNT - prints a message in TOOLMSG containing the count of records in a data set. Can also be used to create an output data set containing text and the count, or to set RC=12, RC=8, RC=4 or RC=0 based on the count of records in a data set. Example: print a count of the number of records in the IN2 data set. COUNT FROM(IN2) ICE627I 0 DFSORT CALL 0002 FOR COPY FROM IN2 TO E35 EXIT COMPLETED ICE628I 0 RECORD COUNT: 000000000000008 ICE602I 0 OPERATION RETURN CODE: 00 * * * * * * *

Example of Using COUNT to Set RC=12 or RC=0

COUNT FROM(IN5) EMPTY TOOLMSG Output if IN5 is empty ICE646A 0 RECORD COUNT MEETS CRITERIA - RC=12 SET ICE602I 0 OPERATION RETURN CODE: 12 TOOLMSG Output if IN5 is not empty ICE647I 0 RECORD COUNT DOES NOT MEET CRITERIA - RC=0 SET ICE602I 0 OPERATION RETURN CODE: 00

Example of Using COUNT to Set RC=4 or RC=0

COUNT FROM(IN5) HIGHER(5) RC4 TOOLMSG Output if IN5 has 6 or more records ICE651A 0 RECORD COUNT MEETS CRITERIA - RC=4 SET ICE602I 0 OPERATION RETURN CODE: 04 TOOLMSG Output if IN5 has 5 or less records ICE647I 0 RECORD COUNT DOES NOT MEET CRITERIA - RC=0 SET ICE602I 0 OPERATION RETURN CODE: 00

ICETOOL Mini-User Guide

15

DATASORT Operator Details

Syntax
DATASORT FROM(indd) TO(outdd) USING(xxxx) HEADER FIRST HEADER(u) FIRST(u) TRAILER VSAMTYPE(x) LAST TRAILER(v) LAST(v)

Function
Copies one or more header records and/or one or more trailer records to the outdd data set in their original indd record order, while sorting the indd data records between the header and trailer records to the outdd data set. Thus, the first n records (header records) and/or last n records (trailer records) are kept in place and the data records between them are sorted. You must supply a DFSORT SORT statement in xxxxCNTL to indicate the control fields for sorting the data records. Additional DFSORT control statements in xxxxCNTL are used if specified.

Examples
DATASORT FROM(INPUT) TO(OUTPUT) HEADER TRAILER USING(CTL1) DATASORT FROM(FILE1) TO(FILE2) LAST(5) USING(CTL1) DATASORT FROM(IN1) TO(OUT1) HEADER(3) TRAILER(2) USING(CTL1) CTL1CNTL might contain the following: SORT FIELDS=(11,5,CH,A,21,6,SFF,D)

Required Operands
FROM - the ddname of the input data set. You must supply a DD statement for the ddname you specify. TO - the ddname of the output data set for the sorted records. You must supply a DD statement for the ddname you specify. USING - the first 4 characters of the ddname (xxxxCNTL) for the DFSORT control statement data set. You must supply a DD statement for xxxxCNTL. You must supply a DFSORT SORT statement in xxxxCNTL. See z/OS DFSORT Application Programming Guide for details of the other DFSORT control statements you can use with SUBSET. HEADER, FIRST, TRAILER, LAST - defines the number of header records (first u records) and/or trailer records (last v records) to be kept in place. u and v must be specified as n or +n where n can be 1 to 1000000.

Optional Operands
VSAMTYPE - the record format for a VSAM input data set (F or V).

16

DFSORT/ICETOOL

Symbols
Symbols for decimal constants can be used instead of n and +n in the HEADER, FIRST, TRAILER and LAST operands.

Notes
The DFSORT DYNALLOC option is used to ensure that work space is available for the sort performed for the DATASORT operation. Tape work data sets cannot be used with ICETOOL.

Example of TOOLMSG Output for DATASORT

DATASORT - sorts data records between header and trailer records in a data set to an output data set. Example: sort the IN3 data set to the SRT1 data set keeping the header record and two trailer records in place. Uses the DFSORT SORT statement in the SRT1CNTL data set to sort the data records. DATASORT FROM(IN3) TO(SRT1) HEADER TRAILER(2) USING(SRT1) ICE606I 0 DFSORT CALL 0003 FOR SORT FROM IN3 TO SRT1 USING SRT1CNTL COMPLETED ICE602I 0 OPERATION RETURN CODE: 00 * * * * * *

ICETOOL Mini-User Guide

17

DEFAULTS Operator Details

Syntax
DEFAULTS LIST(listdd) LISTSDB LISTNOSDB

Function
Prints, in the listdd data set, the DFSORT installation defaults. DFSORT lets you maintain eight separate sets of installation defaults for eight different installation environments as follows: JCL (ICEAM1) - batch JCL directly invoked installation environment INV (ICEAM2) - batch program invoked installation environment TSO (ICEAM3) - TSO directly invoked installation environment TSOINV (ICEAM4) - TSO program invoked installation environment TD1 (ICETD1) - first time-of-day installation environment TD2 (ICETD2) - second time-of-day installation environment TD3 (ICETD3) - third time-of-day installation environment TD4 (ICETD4) - fourth time-of-day installation environment Each installation default has two or more possible values; DFSORT is shipped with a set of IBM-supplied defaults that can be modified using ICEPRMxx members of PARMLIB or the ICEMAC macro. The DEFAULTS operator provides an easy way to determine the installation default values to be used at run-time. DEFAULTS produces a three-part report showing: 1. The merged PARMLIB/ICEMAC installation default values for ICEAM1-4 and ICETD1-4 that will be used at run-time. 2. The specified PARMLIB ICEPRMxx member option values for ICEAM1-4 and ICETD1-4 (for reference). 3. The ICEMAC installation default values for ICEAM1-4 and ICETD1-4 (for reference). See z/OS DFSORT Installation and Customization for a complete discussion of ICEPRMxx members in PARMLIB, the ICEMAC macro, the eight installation environments, the installation default values and the DEFAULTS report.

Examples
DEFAULTS LIST(SHOWDEF) DEFAULTS LIST(DFLTS) LISTSDB

Required Operand
LIST - the ddname of the list data set. You must supply a DD statement for the ddname you specify.

18

DFSORT/ICETOOL

Optional Operands
LISTSDB - uses SDB for the list data set (overrides installation value SDBMSG=NO). LISTNOSDB - does not use SDB for the list data set (overrides installation value SDBMSG=YES).

Notes
The control character occupies the first byte of each record in the list data set. RECFM=FBA and LRECL=121 are used for the list data set.

Example of TOOLMSG Output for DEFAULTS

DEFAULTS - prints the DFSORT installation defaults in a separate list data set. Example: print the JCL, INV, TSO, TSOINV, TD1, TD2, TD3 and TD4 installation defaults selected, in the INSTDEF data set DEFAULTS LIST(INSTDEF) ICE603I 0 INFORMATION PRINTED IN INSTDEF DATA SET ICE602I 0 OPERATION RETURN CODE: 00 * * * * *

Example of List Output for DEFAULTS

Here's an example of the output that would appear in INSTDEF: Z/OS DFSORT V1R12 MERGED PARMLIB/ICEMAC DEFAULTS - 1 -

* IBM-SUPPLIED DEFAULT (ONLY SHOWN IF DIFFERENT FROM THE SPECIFIED DEFAULT) ITEM ---------ENABLE ABCODE ALTSEQ ARESALL ARESINV CFW CHALT . . . JCL (ICEAM1) -------------------NONE MSG SEE BELOW 0 NOT APPLICABLE YES YES * NO . . . INV (ICEAM2) -------------------TD1 99 * MSG SEE BELOW 0 0 YES YES * NO . . . ... ... ... ... ... ... ... ... ... ... ... ... ... ...

ICETOOL Mini-User Guide

19

DISPLAY Operator Details

Syntax
DISPLAY FROM(indd) LIST(listdd) ON(p,m,f) ... ON(p,m,f,formatting) ON(p,m,HEX) ON(VLEN) ON(VLEN,formatting) ON(NUM) ON(NUM,formatting) TITLE('string1') ... TLEFT TFIRST TITLE('string1','string2') TITLE('string1','string2','string3') PAGE DATE TIME NOCC DATE(abcd) TIME(abc) DATENS(abc) TIMENS(ab) YDDD(abc) YDDDNS(ab) HEADER('string1') ... LINES(n) BLANK HEADER('string1','string2') PLUS HEADER('string1','string2','string3') HEADER(NONE) NOHEADER TOTAL('string') MAXIMUM('string') MINIMUM('string') AVERAGE('string') COUNT('string') EDCOUNT(formatting) LIMIT(n) VSAMTYPE(x) WIDTH(n) BREAK(p,m,f) BTITLE('string') BTOTAL('string') BREAK(p,m,f,formatting) BMAXIMUM('string') BMINIMUM('string') BAVERAGE('string') BCOUNT('string') EDBCOUNT(formatting) INDENT(n) BETWEEN(n) TBETWEEN(n) STATLEFT UZERO LISTSDB

Function
Prints, in the listdd data set, the values or characters of specified numeric and/or character fields. The fields are printed in columns in the same order in which they are specified. From 1 to 50 ON fields can be specified as long as the resulting list data set line length does not exceed the limit specified by the WIDTH operand or 8192 bytes. Simple, tailored or sectioned reports can be produced: Up to three title lines can appear at the top of each page, or only at the top of the first page. The first title line can consist of a title string, the page number, the date and/or the time, in any order specified. The second title line consists of a specified title string. The third title line consists of a specified title string. The title strings can be centered or left-justified with respect to each other.

20

DFSORT/ICETOOL

Carriage control characters can be printed or suppressed. One, two or three line headings can be printed to identify each specified field. Overall statistics (total, maximum, minimum, average, and/or count) can be produced. Column widths are adjusted automatically according to the operands specified and the length of the fields. Alternate formats for date and time can be specified. Numeric fields, consisting of a sign and up to 31 digits in various formats, and counts can be edited with separators, decimal points, patterns, division, and leading, trailing and floating signs. A break field can be used to produce sections with their own break title and break statistics (total, maximum, minimum, average and/or count).

Examples
DISPLAY FROM(DATA) LIST(SHOWIT) ON(10,44,CH) ON(5,4,FS) DISPLAY FROM(VLR) LIST(RDWLIST) INDENT(10) BETWEEN(5) TBETWEEN(4) TITLE('Record Length Report') DATE TITLE('for VB data set') HEADER('Record','number') ON(NUM,U04) HEADER('Record','length') ON(VLEN,U05) HEADER(,'RDW in Hex') ON(1,4,HEX) TOTAL('Total') AVERAGE('Average') MINIMUM('Minimum') MAXIMUM('Maximum') COUNT('Number of records ') EDCOUNT(U06) DISPLAY FROM(MASTER) LIST(DENMARK) LINES(50) PAGE TITLE('Report for Denmark') DATE(DM4-) BTITLE('Division:') BREAK(23,10,CH) HEADER('Part') ON(15,6,CH) HEADER('Completed') ON(3,4,ZD,A2) HEADER('Value (kr)') ON(38,12,SFF,C2) BMINIMUM('Lowest in this Division:') BMAXIMUM('Highest in this Division:') BAVERAGE('Average in this Division:') BTOTAL('Total for this Division:') AVERAGE('Average for all Divisions:') DISPLAY FROM(DATA1) LIST(KBDATA) WIDTH(150) NOHEADER NOCC ON(15,44,CH) ON(8,4,PD,/KB,T' KB') DISPLAY FROM(SMF14) LIST(SMF14RPT) TITLE('SMF Type-14 Records') DATENS(4MD) LISTSDB HEADER('Date') ON(11,4,DT1,E'9999/99/99') HEADER('Time') ON(7,4,TM1,E'99:99:99') HEADER('Sys') ON(15,4,CH) HEADER('Jobname') ON(19,8,CH) HEADER('Datasetname') ON(69,44,CH)

ICETOOL Mini-User Guide

21

Required Operands
FROM - the ddname of the input data set. You must supply a DD statement for the ddname you specify. LIST - the ddname of the list data set. You must supply a DD statement for the ddname you specify. ON - a field to be used for this operation. From 1 to 50 ON fields can be specified. (p,m,f) gives the position, length and format of a numeric or character field. A field must not extend beyond position 32752 or the end of the record. (p,m,f,formatting) gives the position, length and format of a numeric or character field and specifies how the data for this field is to be formatted for printing. A field must not extend beyond position 32752 or the end of the record. The following formatting items can be used (see DFSORT Application Programming Guide for complete details): Mask - an edit mask to be applied to the numeric data. Thirty-nine pre-defined edit masks are available, encompassing many of the numeric notations throughout the world with respect to separators, decimal point, decimal places, signs and so on. See "Appendix A" for complete descriptions and examples of all thirty-nine masks. The attributes of each group of masks is shown below. Decimal Places 0 0 1 2 3 0 2 4 Positive Sign blank blank blank blank blank blank blank blank Negative Sign () () -

Masks A0 A1-A5 B1-B6 C1-C6 D1-D6 E1-E4 F1-F5 G1-G6

Separators No Yes Yes Yes Yes Yes Yes Yes

E'pattern' - an edit pattern (1 to 44 characters) to be applied to the numeric data. Each 9 in the pattern (up to 31) is replaced by a corresponding digit (0-9) from the numeric value. Other characters in the pattern appear as specified. E'pattern' can be used for formatting unsigned numeric data such as telephone numbers, dates, and so on. L'string' - a leading string to appear at the beginning of the character or numeric data column. Each string can be 1 to 10 characters. F'string' - a floating string to appear to the left of numeric data. Each string can be 1 to 10 characters. T'string' - a trailing string to appear at the end of the character or numeric data column. Each string can be 1 to 10 characters. LZ - used with an edit mask to print leading zeros for the numeric field (overriding the default of suppressing leading zeros). NOST - used to suppress specified statistics for the numeric field (overriding the default of printing specified statistics). Ndd - use dd digits for the numeric field where dd is greater than the calculated number of digits. dd must be a two-digit number from 01 to 31.

22

DFSORT/ICETOOL

 Udd - use dd digits for the numeric field where dd is greater than or less than the calculated number of digits. dd must be a two-digit number from 01 to 31. /x - used to divide numeric data before formatting. /x indicates a division factor as follows: /D: 10 /C: 100 /K: 1000 /KB: 1024 /DK: 10*1000 /CK: 100*1000 /M: 1000*1000 /MB: 1024*1024 /G: 1000*1000*1000 /GB: 1024*1024*1024 (p,m,HEX) gives the position and length of a character field to be printed in hexadecimal format. A field must not extend beyond position 32752 or the end of the record. VLEN is equivalent to ON(1,2,BI) and for variable-length records, represents the record length for each record. The following formatting items can be used with VLEN: mask, E'pattern', L'string', F'string', T'string', LZ, NOST, Ndd, Udd and /x. NUM specifies that the record number is to be printed starting at 1 and incrementing by 1 for each record. The following formatting items can be used with NUM: mask, E'pattern', L'string', F'string', T'string', LZ, Ndd and Udd. A description of each type of field is given below.
Format Code BI FI PD ZD CH FL CSF/FS UFF SFF DT1 DT2 DT3 DC1 DC2 DC3 Length 1-8 bytes 1-8 bytes 1-16 bytes 1-31 bytes 1-4000 bytes 4 or 8 bytes 1-32 bytes 1-44 bytes 1-44 bytes 4 bytes 4 bytes 4 bytes 8 bytes 8 bytes 8 bytes Description Unsigned binary Signed fixed-point Signed packed decimal Signed zoned decimal Character Signed hexadecimal floating-point as integer Floating sign Unsigned free form numeric Signed free form numeric SMF date as Z'yyyymmdd' SMF date as Z'yyyymm' SMF date as Z'yyyyddd' TOD date as Z'yyyymmdd' TOD date as Z'yyyymm' TOD date as Z'yyyyddd'

ICETOOL Mini-User Guide

23

Format Code DE1 DE2 DE3 TM1 TM2 TM3 TM4 TC1 TC2 TC3 TC4 TE1 TE2 TE3 TE4 HEX VLEN NUM

Length 8 bytes 8 bytes 8 bytes 4 bytes 4 bytes 4 bytes 4 bytes 8 bytes 8 bytes 8 bytes 8 bytes 8 bytes 8 bytes 8 bytes 8 bytes 1-2000 bytes n/a n/a

Description ETOD date as Z'yyyymmdd' ETOD date as Z'yyyymm' ETOD date as Z'yyyyddd' SMF time as Z'hhmmss' SMF time as Z'hhmm' SMF time as Z'hh' SMF time as Z'hhmmssxx' TOD time as Z'hhmmss' TOD time as Z'hhmm' TOD time as Z'hh' TOD time as Z'hhmmssxx' ETOD time as Z'hhmmss' ETOD time as Z'hhmm' ETOD time as Z'hh' ETOD time as Z'hhmmssxx' Character printed as hexadecimal Record length for VLR (1,2,BI) Relative record number

Optional Operands
TITLE, PAGE, DATE, DATENS, YDDD, YDDDNS, TIME and TIMENS - the elements to appear in the title lines at the top of each page. Only specified elements appear and in the order given. Each title string can consist of up to three individual strings. The page, date and time appear in the first title line with the first title string. The second title string appears in the second title line. The third title string appears in the third title line. A string can be 1 to 50 characters; the maximum length for each title string can be 50 characters. Alternate formats for date and time can be specified. TLEFT - title strings are left-justified with respect to each other (overriding the default of centering title strings with respect to each other). TFIRST - the title lines are only printed on the first page (overriding the default of printing the title lines on every page). NOCC - suppresses carriage control characters (overriding the default of printing carriage control characters). HEADER - a one, two or three line heading to be printed for the corresponding ON field (overriding the "standard" one line heading of "(p,m,f)"). A heading string can be 1 to 50 characters. NONE can be used to suppress the heading for the corresponding ON field. NOHEADER - suppresses the heading line. LINES - the number of lines per page (overriding the default of 58). n can be 10 to 999. BLANK and PLUS - causes the column widths to be dynamically adjusted as needed (overriding the standard fixed column widths) and suppresses leading zeros for numeric fields. BLANK causes a blank, rather than a + to be used for the positive sign.

24

DFSORT/ICETOOL

TOTAL, MAXIMUM, MINIMUM, AVERAGE and COUNT - the overall statistics to appear after the columns of data for the report. Only the specified statistics appear and in the order given. Each string can be 1 to 50 characters. EDCOUNT - specifies how the overall count is to be formatted for printing. The following formatting items can be used (see DFSORT Application Programming Guide for complete details): mask, E'pattern', L'string', F'string', T'string', LZ and Udd. LIMIT - a limit for the number of invalid decimal values (overriding the default of 200). If n invalid decimal values are for an explanation of invalid decimal values. VSAMTYPE - the record format for a VSAM input data set (F or V). WIDTH - the line length and LRECL for the list data set. n can be 121 to 8192 (or 121 to 8191 if NOCC is specified). If the WIDTH specified is less than the calculated line length, ICETOOL terminates the operation. If WIDTH is not specified, the calculated line length (subject to a minimum of 121, or 120 if NOCC is specified), is used as the line length and LRECL for the list data set. LONGLINE - if WIDTH(n) is not specified, allows the calculated line length to be up to 8192 bytes (overriding the default of 2048 bytes). BREAK - the break field to be used to divide the report into sections. Each set of sequential input records with the same break field value is treated as a section in the report. Each section starts on a new page with its own section title and section statistics. The following formatting items can be used with BREAK: mask, E'pattern', L'string', F'string', T'string', LZ and Udd. BTITLE - a string to appear in the section title. The break field and string appear in the section title in the order given. The string can be 1 to 50 characters. BTOTAL, BMAXIMUM, BMINIMUM, BAVERAGE and BCOUNT - the section statistics to appear after the columns of data for each section. Only the specified statistics appear for each section and in the order given. Each string can be 1 to 50 characters. EDBCOUNT - specifies how the section count is to be formatted for printing. The following formatting items can be used (see DFSORT Application Programming Guide for complete details): mask, E'pattern', L'string', F'string', T'string', LZ and Udd. INDENT - the number of blanks used to indent the report (overriding the default of 0). n can be 0 to 50. BETWEEN - the number of blanks used between the columns of data (overriding the default of 3). n can be 0 to 50. TBETWEEN - the number of blanks used between title elements (overriding the default of 8). n can be 0 to 50. STATLEFT - places the statistics strings to the left of the first column of data (overriding the default of placing the strings in the first column). UZERO - causes -0 to be treated as unsigned, that is, as +0. LISTSDB - uses SDB for the list data set (overrides installation value SDBMSG=NO). LISTNOSDB - does not use SDB for the list data set (overrides installation value SDBMSG=YES).

Symbols
Symbols for fields can be used instead of p,m,f and p,m in the ON and BREAK operands. Symbols for character constants can be used instead of 'string' in the TITLE, HEADER, TOTAL, MAXIMUM, MINIMUM, AVERAGE, COUNT, BTITLE, BTOTAL, BMAXIMUM, BMINIMUM, BAVERAGE and BCOUNT operands.

ICETOOL Mini-User Guide

25

Notes
The control character occupies the first byte of each record in the list data set unless NOCC is specified. By default, the first column starts in the second byte of each record in the list data set (or in the first byte if NOCC is specified). INDENT(n) or STATLEFT can be used to override this default. By default, three blanks appear between columns in the list data set. BETWEEN(n) can be used to override this default. By default, eight blanks appear between title elements in the list data set. TBETWEEN(n) can be used to override this default. RECFM=FBA is used for the list data set if NOCC is not specified. RECFM=FB is used for the list data set if NOCC is specified. Specifying LONGLINE can enable you to include more fields in your report, up to a maximum of 50.

26

DFSORT/ICETOOL

Example of TOOLMSG Output for DISPLAY

* * * * * * * * DISPLAY - prints the values and characters of specific numeric and character fields in a separate list data set. Simple, tailored or sectioned reports can be produced. Maximums, minimums, totals, averages and counts can be produced. Example: print a tailored report showing values from the three IN2 data set ON fields, with title, heading lines, maximum, minimum and count, in the DOUT data set. DISPLAY FROM(IN2) LIST(DOUT) BLANK TITLE('IN2 Data Set Report') PAGE DATE TIME HEADER('Store') ON(50,15,CH) HEADER('Profit/(Loss)') ON(26,8,ZD,E1) HEADER('Employees') ON(2,3,ZD) MAXIMUM('Largest') MINIMUM('Smallest') COUNT('Number of stores') EDCOUNT(U03) DFSORT CALL 0004 FOR COPY FROM IN2 TO E35 EXIT COMPLETED INFORMATION PRINTED IN DOUT DATA SET RECORD COUNT: 000000000000008 OPERATION RETURN CODE: 00

ICE627I ICE603I ICE628I ICE602I

0 0 0 0

Example of List Output for DISPLAY

Here's an example of the output that would appear in DOUT: IN2 Data Set Report Store --------------San Jose Morgan Hill Palo Alto Sunnyvale San Francisco San Diego Los Altos Gilroy Largest Smallest Number of stores - 1 02/28/05 Employees --------123 71 101 166 27 102 123 152 166 27 13:15:19

Profit/(Loss) ------------72,345,678 10,273 (52,766,111) 92,378,566 12 (64,832,715) 43,343,732 89,348,399 92,378,566 (64,832,715) 8

ICETOOL Mini-User Guide

27

Example using OUTFIL Lookup and Change with DISPLAY

COPY FROM(IN) USING(OUTF) DISPLAY FROM(TEMP) LIST(EMPCT) BLANK TITLE('Employees by Function') YDDD(4D-) HEADER(,'Function') HEADER('Number of','Employees') ON(1,25,CH) ON(30,4,ZD) OUTFCNTL contains: OUTFIL FNAMES=TEMP, BUILD=(1:9,2,CHANGE=(25, C'MN',C'Manufacturing', C'RD',C'Research and Development', C'FN',C'Finance', C'MR',C'Marketing', C'IS',C'Information Systems'), 30:4,4)

Example of Lookup and Change with DISPLAY Output

Below is an example of the output that would appear in EMPCT. Employees by Function Function ------------------------Manufacturing Marketing Research and Development Information Systems Finance 2005-059 Number of Employees --------486 21 55 123 33

Note that the 2-character division codes at position 9 have been replaced by meaningful phrases using DFSORT's OUTFIL lookup and change feature. Complete details on this feature of OUTFIL as well as its many other features can be found in DFSORT Application Programming Guide.

28

DFSORT/ICETOOL

Example of Plain and Fancy Reports

* Produce a plain report DISPLAY FROM(ACCTS) LIST(PLAIN) TITLE('Accounts Report for First Quarter') DATE(MD4/) BLANK HEADER('Amount') ON(12,6,ZD) HEADER('Id') ON(NUM) HEADER('Acct#') ON(31,3,PD) HEADER('Date') ON(1,4,ZD) TOTAL('Total for Q1') AVERAGE('Average for Q1') * Produce a fancy report by using INDENT, * BETWEEN, STATLEFT and formatting items * to improve its appearance DISPLAY FROM(ACCTS) LIST(FANCY) TBETWEEN(16) TITLE('Accounts Report for First Quarter') DATE(MD4/) BLANK HEADER('Amount') ON(12,6,ZD,C1,N08) HEADER('Id') ON(NUM,N02) HEADER('Acct#') ON(31,3,PD,NOST,LZ) HEADER('Date') ON(1,4,ZD,E'99/99',NOST) INDENT(2) BETWEEN(5) STATLEFT TOTAL('Total for Q1') AVERAGE('Average for Q1')

ICETOOL Mini-User Guide

29

Example of Plain Report Output

Accounts Report for First Quarter Amount ---------------93271 137622 83147 183261 76389 920013 Total for Q1 1493703 Average for Q1 248950 Id --------------1 2 3 4 5 6 04/17/2006 Acct# ---------------15932 187 15932 2158 187 15932 50328 8388 Date ---------------106 128 212 217 305 319 1287 214

Example of Fancy Report Output

Accounts Report for First Quarter Amount ----------932.71 1,376.22 831.47 1,832.61 763.89 9,200.13 Total for Q1 Average for Q1 14,937.03 2,489.50 Id --1 2 3 4 5 6 Acct# -----15932 00187 15932 02158 00187 15932 04/17/2006 Date ----01/06 01/28 02/12 02/17 03/05 03/19

30

DFSORT/ICETOOL

MERGE Operator Details

Syntax
MERGE FROM(indd,...) ... USING(xxxx) TO(outdd,...) VSAMTYPE(x) LOCALE(name) SERIAL LOCALE(CURRENT) LOCALE(NONE)

Function
Merges the indd data sets (up to 50 in up to 10 FROM operands) to the outdd data sets (up to 10) using the DFSORT control statements in xxxxCNTL. You must supply a DFSORT MERGE statement in xxxxCNTL to indicate the control fields for the MERGE. The records in each input data set to be merged must already be in sorted order as specified by the control field in the supplied DFSORT MERGE statement. Additional DFSORT control statements and options can be used to merge a subset of the input records (INCLUDE or OMIT statement; OUTFIL INCLUDE, OMIT, SAVE, STARTREC, ENDREC, ACCEPT, SAMPLE, SPLIT, SPLITBY and SPLIT1R operands), reformat records for output (INREC, OUTREC and OUTFIL statements), and so on. See z/OS DFSORT Application Programming Guide for complete details of DFSORT control statements and options.

Example
MERGE FROM(INPUT1,INPUT2,INPUT3,INPUT4,INPUT5)FROM(INPUT6,INPUT7) USING(CTL1) CTL1CNTL might contain the following: //CTL1CNTL DD * MERGE FIELDS=(52,8,UFF,D) OUTFIL FNAMES=OUT1,INCLUDE=(15,3,SS,EQ,C'D21,D33') OUTFIL FNAMES=OUT2,SAVE

Required Operands
FROM - the ddnames of 1 to 50 input data sets. You must supply DD statements for the ddnames you specify. USING - the first 4 characters of the ddname (xxxxCNTL) for the DFSORT control statement data set. You must supply a DD statement for xxxxCNTL. You must supply a DFSORT MERGE statement in xxxxCNTL.

Optional Operands
TO - the ddnames of 1 to 10 output data sets. You must supply DD statements for the ddnames you specify. VSAMTYPE - the record format for a VSAM input data set (F or V). LOCALE - overrides the installation default for locale processing. SERIAL - causes OUTFIL processing not to be used for multiple outdd data sets. SERIAL is not recommended because it imposes data set restrictions and can degrade performance.

Note
If you use OUTFIL statements in xxxxCNTL to specify your output data sets, you do not need to specify TO.

ICETOOL Mini-User Guide

31

Example of TOOLMSG Output for MERGE

MERGE - merges one or more data sets to one or more output data sets. Example: merge the IN01, IN02 and IN03 data sets to the MRGOUT output data set using the DFSORT control statements in the MRG1CNTL data set. MERGE FROM(IN01,IN02,IN03) TO(MRGOUT) USING(MRG1) ICE606I 0 DFSORT CALL 0005 FOR MERGE FROM MERGEIN TO MRGOUT USING MRG1CNTL COMPLETED ICE602I 0 OPERATION RETURN CODE: 00 * * * * *

MODE Operator Details

Syntax
MODE STOP CONTINUE SCAN

Function
Specifies one of three modes to control error checking and actions after error detection. A MODE operator affects the processing of the group of operators which follow it, up to the next MODE operator (if any). Dependent operators (those for which a failure of one should stop execution of the rest) can be grouped with MODE STOP. Independent operators (those for which a failure of one should not affect execution of the rest) can be grouped with MODE CONTINUE. Operators to be checked for errors only can be grouped with MODE SCAN.

Examples
MODE CONTINUE <independent operator group> MODE STOP <dependent operator group>

Required Operand
STOP, CONTINUE or SCAN. STOP - If an operation fails, stops processing the remaining operators in the group, but continues to check for errors in ICETOOL statements. STOP mode is the default set at the beginning of an ICETOOL run. CONTINUE - If an operation fails, continues processing the remaining operators in the group. SCAN - Checks for errors in ICETOOL statements without processing the operators. Set automatically if an error is detected while in STOP mode.

Note
The return codes for one group of operators does not affect the other groups of operators.

Example of TOOLMSG Output for MODE

32

DFSORT/ICETOOL

MODE - specifies the error checking and actions after error detection to be performed for a group of operators. Example: continue processing operators whether or not an error is detected. MODE CONTINUE ICE630I 1 MODE IN EFFECT: CONTINUE ICE602I 1 OPERATION RETURN CODE: 00

* * * *

ICETOOL Mini-User Guide

33

OCCUR Operator Details

Syntax
OCCUR FROM(indd) LIST(listdd) ON(p,m,f) ... OCCURS ON(p,m,f,formatting) ON(p,m,HEX) ON(VLEN) ON(VLEN,formatting) ON(VALCNT) ON(VALCNT,formatting) TITLE('string1') ... TLEFT TFIRST TITLE('string1','string2') TITLE('string1','string2','string3') PAGE DATE TIME NOCC DATE(abcd) TIME(abc) DATENS(abc) TIMENS(ab) YDDD(abc) YDDDNS(ab) HEADER('string1') ... LINES(n) BLANK HEADER('string1','string2') PLUS HEADER('string1','string2','string3') HEADER(NONE) NOHEADER ALLDUPS NODUPS HIGHER(x) LOWER(y) EQUAL(v) VSAMTYPE(x) WIDTH(n)

INDENT(n) BETWEEN(n) TBETWEEN(n) UZERO LISTSDB LISTNOSDB

Function
Prints, in the listdd data set, each unique value for specified numeric and/or character fields and how many times it occurs. From 1 to 10 ON fields can be specified as long as the resulting list data set line length does not exceed the limit specified by the WIDTH operand or 8192 bytes. All ON fields specified are used to determine whether a record contains a unique value. A single list data set record is printed for each unique value with the fields printed in columns in the same order in which they are specified. Simple or tailored reports can be produced. Up to three title lines can appear at the top of each page or only at the top of the first page. The first title line can consist of a title string, the page number, the date and/or the time, in any order specified. The second title line consists of a specified title string. The third title line consists of a specified title string. The title strings can be centered or left-justified with respect to each other. Carriage control characters can be printed or suppressed. One, two or three line headings can be printed to identify each specified field.

34

DFSORT/ICETOOL

Column widths are adjusted automatically according to the operands specified and the length of the fields. Alternate formats for date and time can be specified. Numeric fields, consisting of a sign and up to 31 digits in various formats, can be edited with separators, decimal points, patterns, and leading, trailing and floating signs. The ON values printed can be limited to only duplicates, non-duplicates or those that occur less than, equal to or more than n times.

Examples
OCCUR OCCUR FROM(SOURCE) LIST(VOLSERS) ON(40,6,CH) ON(VALCNT) FROM(FAILURES) LIST(CHECKIT) LISTNOSDB DATE(YMD.) TITLE('Possible System Intruders') TIME(12.) TITLE('based on logon failures') TFIRST HEADER(' Userid ') ON(23,8,CH) HEADER(' Logon Failures ') ON(VALCNT) HIGHER(4) BLANK

Required Operands
FROM - the ddname of the input data set. You must supply a DD statement for the ddname you specify. LIST - the ddname of the list data set. You must supply a DD statement for the ddname you specify. ON - a field to be used for this operation. From 1 to 10 ON fields can be specified. (p,m,f) gives the position, length and format of a numeric or character field. A field must not extend beyond position 32752 or the end of the record. (p,m,f,formatting) gives the position, length and format of a numeric or character field and specifies how the data for this field is to be formatted for printing. A field must not extend beyond position 32752 or the end of the record. The following formatting items can be used (see DFSORT Application Programming Guide for complete details): Mask - an edit mask to be applied to the numeric data. Thirty-nine pre-defined edit masks are available, encompassing many of the numeric notations throughout the world with respect to separators, decimal point, decimal places, signs and so on. See "Appendix A" for complete descriptions and examples of all thirty-nine masks. The attributes of each group of masks is shown below.

ICETOOL Mini-User Guide

35

Masks A0 A1-A5 B1-B6 C1-C6 D1-D6 E1-E4 F1-F5 G1-G6

Separators No Yes Yes Yes Yes Yes Yes Yes

Decimal Places 0 0 1 2 3 0 2 4

Positive Sign blank blank blank blank blank blank blank blank

Negative Sign () () -

E'pattern' - an edit pattern (1 to 44 characters) to be applied to the numeric data. Each 9 in the pattern (up to 31) is replaced by a corresponding digit (0-9) from the numeric value. Other characters in the pattern appear as specified. E'pattern' can be used for formatting unsigned numeric data such as telephone numbers, dates, and so on. L'string' - a leading string to appear at the beginning of the character or numeric data column. Each string can be 1 to 10 characters. F'string' - a floating string to appear to the left of numeric data. Each string can be 1 to 10 characters. T'string' - a trailing string to appear at the end of the character or numeric data column. Each string can be 1 to 10 characters. LZ - used with an edit mask to print leading zeros for the numeric field (overriding the default of suppressing leading zeros). Ndd - use dd digits for the numeric field where dd is greater than the calculated number of digits. dd must be a two-digit number from 01 to 31. Udd - use dd digits for the numeric field where dd is greater than or less than the calculated number of digits. dd must be a two-digit number from 01 to 31. (p,m,HEX) gives the position and length of a character field to be printed in hexadecimal format. A field must not extend beyond position 32752 or the end of the record. VLEN is equivalent to ON(1,2,BI) and for variable-length records, represents the record length for each record. The following formatting items can be used with VLEN: mask, E'pattern', L'string', F'string', T'string', LZ, Ndd and Udd. VALCNT causes the count of occurrences for each value to be printed. The following formatting items can be used with VALCNT: mask, E'pattern', L'string', F'string', T'string', LZ, Ndd and Udd. A description of each type of field is given below.
Format Code BI FI PD ZD CH Length 1-8 bytes 1-8 bytes 1-16 bytes 1-31 bytes 1-4000 bytes Description Unsigned binary Signed fixed-point Signed packed decimal Signed zoned decimal Character

36

DFSORT/ICETOOL

Format Code CSF/FS UFF SFF DT1 DT2 DT3 DC1 DC2 DC3 DE1 DE2 DE3 TM1 TM2 TM3 TM4 TC1 TC2 TC3 TC4 TE1 TE2 TE3 TE4 HEX VLEN VALCNT

Length 1-32 bytes 1-44 bytes 1-44 bytes 4 bytes 4 bytes 4 bytes 8 bytes 8 bytes 8 bytes 8 bytes 8 bytes 8 bytes 4 bytes 4 bytes 4 bytes 4 bytes 8 bytes 8 bytes 8 bytes 8 bytes 8 bytes 8 bytes 8 bytes 8 bytes 1-2000 bytes n/a n/a

Description Floating sign Unsigned free form numeric Signed free form numeric SMF date as Z'yyyymmdd' SMF date as Z'yyyymm' SMF date as Z'yyyyddd' TOD date as Z'yyyymmdd' TOD date as Z'yyyymm' TOD date as Z'yyyyddd' ETOD date as Z'yyyymmdd' ETOD date as Z'yyyymm' ETOD date as Z'yyyyddd' SMF time as Z'hhmmss' SMF time as Z'hhmm' SMF time as Z'hh' SMF time as Z'hhmmssxx' TOD time as Z'hhmmss' TOD time as Z'hhmm' TOD time as Z'hh' TOD time as Z'hhmmssxx' ETOD time as Z'hhmmss' ETOD time as Z'hhmm' ETOD time as Z'hh' ETOD time as Z'hhmmssxx' Character printed as hexadecimal Record length for VLR (1,2,BI) Value count

Optional Operands
TITLE, PAGE, DATE, DATENS, YDDD, YDDDNS, TIME and TIMENS - the elements to appear in the title lines at the top of each page. Only specified elements appear and in the order given. Each title string can consist of up to three individual strings. The page, date and time appear in the first title line with the first title string. The second title string appears in the second title line. The third title string appears in the third title line. A string can be 1 to 50 characters; the maximum length for each title string can be 50 characters. Alternate formats for date and time can be specified. TLEFT - title strings are left-justified with respect to each other (overriding the default of centering title strings with respect to each other). TFIRST - the title lines are only printed on the first page (overriding the default of printing the title lines on every page).

ICETOOL Mini-User Guide

37

NOCC - suppresses carriage control characters (overriding the default of printing carriage control characters). HEADER - a one, two or three line heading to be printed for the corresponding ON field (overriding the "standard" one line heading of "(p,m,f)"). A heading string can be 1 to 50 characters. NONE can be used to suppress the heading for the corresponding ON field. NOHEADER - suppresses the heading line. LINES - the number of lines per page (overriding the default of 58). n can be 10 to 999. BLANK and PLUS - causes the column widths to be dynamically adjusted as needed (overriding the standard fixed column widths) and suppresses leading zeros for numeric fields. BLANK causes a blank, rather than a + to be used for the positive sign. ALLDUPS, NODUPS, HIGHER, LOWER, EQUAL - limits the values to be printed to those whose occurences meet the given criteria. x, y, and v must be specified as n or +n where n can be 1 to 15 decimal digits. VSAMTYPE - the record format for a VSAM input data set (F or V). WIDTH - the line length and LRECL for the list data set. n can be 121 to 8192 (or 121 to 8191 if NOCC is specified). If the WIDTH specified is less than the calculated line length, ICETOOL terminates the operation. If WIDTH is not specified, the calculated line length (subject to a minimum of 121, or 120 if NOCC is specified), is used as the line length and LRECL for the list data set. LONGLINE - if WIDTH(n) is not specified, allows the calculated line length to be up to 8192 bytes (overriding the default of 2048 bytes). INDENT - the number of blanks used to indent the report (overriding the default of 0). n can be 0 to 50. BETWEEN - the number of blanks used between the columns of data (overriding the default of 3). n can be 0 to 50. TBETWEEN - the number of blanks used between title elements (overriding the default of 8). n can be 0 to 50. UZERO - causes -0 to be treated as unsigned, that is, as +0. LISTSDB - uses SDB for the list data set (overrides installation value SDBMSG=NO). LISTNOSDB - does not use SDB for the list data set (overrides installation value SDBMSG=YES).

Symbols
Symbols for fields can be used instead of p,m,f and p,m in the ON operand. Symbols for character constants can be used instead of 'string' in the TITLE and HEADER operands. Symbols for decimal constants can be used instead of n and +n in the HIGHER, LOWER and EQUAL operands.

Notes
The control character occupies the first byte of each record in the list data set unless NOCC is specified. By default, the first column starts in the second byte of each record in the list data set (or in the first byte if NOCC is specified). INDENT(n) can be used to override this default. By default, three blanks appear between columns in the list data set. BETWEEN(n) can be used to override this default. By default, eight blanks appear between title elements in the list data set. TBETWEEN(n) can be used to override this default.

38

DFSORT/ICETOOL

RECFM=FBA is used for the list data set if NOCC is not specified. RECFM=FB is used for the list data set if NOCC is specified. The DFSORT DYNALLOC option is used to ensure that work space is available for the sort performed for the OCCUR operation. Tape work data sets cannot be used with ICETOOL. Specifying LONGLINE can enable you to include more fields in your report, up to a maximum of 10.

ICETOOL Mini-User Guide

39

Example of TOOLMSG Output for OCCUR

* * * * * * * * ICE627I ICE603I ICE628I ICE638I ICE602I 0 0 0 0 0 OCCUR - prints each unique value for specified numeric and character fields and how many times it occurs in a separate list data set. Simple or tailored reports can be produced. The values printed can be limited to those for which the value meets specified criteria (e.g. only duplicate values). Example: print a report showing values from the IN1 data set ON field, with the number of times each value occurs, in the LIST1 data set. OCCUR FROM(IN1) LIST(LIST1) TITLE('Dep''t Counts') ON(35,3,CH) ON(VALCNT) DFSORT CALL 0006 FOR SORT FROM IN1 TO E35 EXIT COMPLETED INFORMATION PRINTED IN LIST1 DATA SET RECORD COUNT: 000000000000072 NUMBER OF RECORDS RESULTING FROM CRITERIA: 000000000000005 OPERATION RETURN CODE: 00

Example of List Output for OCCUR

Here's an example of the output that would appear in LIST1: Dep't Counts (35,3,CH) D54 J69 J82 L92 M27 VALUE COUNT 000000000000012 000000000000009 000000000000020 000000000000017 000000000000014

Example of HIGHER with OCCUR

OCCUR FROM(CALLERS) LIST(CALLRPT) DATENS(4MD) TITLE('Large Call Volume') INDENT(5) BETWEEN(10) HEADER('Phone Number') ON(7,10,ZD,E'(999)-999-9999')HEADER('Calls') ON(VALCNT,A1,N06)HIGHER(1000)

Example of HIGHER with OCCUR Output

20050228 Phone Number -------------(037)-325-1807 (216)-721-5530 (856)-003-3008 Large Call Volume Calls -------3,521 2,100 12,163

40

DFSORT/ICETOOL

RANGE Operator Details

Syntax
RANGE FROM(indd) ON(p,m,f) HIGHER(x) VSAMTYPE(x) ON(VLEN) LOWER(y) EQUAL(v) NOTEQUAL(w)

Function
Prints a message in TOOLMSG containing the count of values in a specified range for a specific numeric field. The range can be specified as higher than x, lower than y, higher than x and lower than y, equal to v, or not equal to w, where x, y, v, and w are signed or unsigned decimal values.

Examples
RANGE FROM(DATA1) ON(VLEN) HIGHER(52) RANGE FROM(DATA2) ON(31,18,ZD) EQUAL(-123456789012345678) RANGE FROM(DATA2) ON(25,3,PD) HIGHER(-20) LOWER(+15)

Required Operands
FROM - the ddname of the input data set. You must supply a DD statement for the ddname you specify. ON - a field to be used for this operation. (p,m,f) gives the position, length and format of a numeric field. A field must not extend beyond position 32752 or the end of the record. VLEN is equivalent to ON(1,2,BI) and for variable-length records, represents the record length for each record. A description of each type of field is given below.
Format Code BI FI PD ZD CSF/FS UFF SFF VLEN Length 1-8 bytes 1-8 bytes 1-16 bytes 1-31 bytes 1-32 bytes 1-44 bytes 1-44 bytes n/a Description Unsigned binary Signed fixed-point Signed packed decimal Signed zoned decimal Floating sign Unsigned free form numeric Signed free form numeric Record length for VLR (1,2,BI)

HIGHER, LOWER, EQUAL, NOTEQUAL - defines the range for the values to be counted. HIGHER and LOWER may be used together or separately. EQUAL and NOTEQUAL must be used separately. x, y, v, and w must be specified as n, +n, or -n where n can be 1 to 31 digits.

ICETOOL Mini-User Guide

41

Optional Operand
VSAMTYPE - the record format for a VSAM input data set (F or V).

Symbols
Symbols for fields can be used instead of p,m,f and p,m in the ON operand. Symbols for decimal constants can be used instead of n, +n and -n in the HIGHER, LOWER, EQUAL and NOTEQUAL operands.

Note
If the range is specified as HIGHER(x) LOWER(y), it must be a valid range. For example, HIGHER(5) LOWER(6) is not a valid range since there is no integer value that satisfies the criteria.

Example of TOOLMSG Output for RANGE

* * * * * ICE627I ICE628I ICE631I ICE602I 0 0 0 0 RANGE - prints a message in TOOLMSG containing the count of values in a specified range for a specified numeric field in a data set. Example: print a count of the values in the IN2 data set ON field that are higher than -50, but lower than +100. RANGE FROM(IN2) ON(20,2,PD) HIGHER(-50) LOWER(100) DFSORT CALL 0007 FOR COPY FROM IN2 TO E35 EXIT COMPLETED RECORD COUNT: 000000000000008 NUMBER OF VALUES IN RANGE FOR (20,2,PD) : 000000000000004 OPERATION RETURN CODE: 00

42

DFSORT/ICETOOL

RESIZE Operator Details

Syntax
RESIZE FROM(indd) TO(outdd) TOLEN(n) USING(xxxx)

Function
Produces fixed length output records of a specified length from fixed length input records of a different length. If the input length is smaller than the specified length, multiple smaller input records are combined into one larger output record. If the input length is larger than the specified length, each larger input record is broken up into multiple smaller output records. The DFSORT control statements in xxxxCNTL are used if USING(xxxx) is specified.

Examples
RESIZE FROM(LARGE) TO(SMALL) TOLEN(25) RESIZE FROM(OLD) TO(NEW) TOLEN(120) USING(CTL1) CTL1CNTL might contain the following: OMIT COND=(1,30,CH,EQ,C' ') SORT FIELDS=(1,30,CH,A)

Required Operands
FROM - the ddname of the input data set. You must supply a DD statement for the ddname you specify. TO - the ddname of the output data set. You must supply a DD statement for the ddname you specify. TOLEN - the record length you want ICETOOL to use for the resized output records. n can be 1 to 32760.

Optional Operand
USING - the first 4 characters of the ddname (xxxxCNTL) for the DFSORT control statement data set. You must supply a DD statement for xxxxCNTL if you specify USING(xxxx). See z/OS DFSORT Application Programming Guide for details of the DFSORT control statements you can use with RESIZE.

Notes
The value of n you specify for TOLEN must not be equal to the input record length. If you specify a DFSORT SORT statement in xxxxCNTL, the DFSORT DYNALLOC option is used to ensure that work space is available for the sort performed for the RESIZE operation. Tape work data sets cannot be used with ICETOOL.

Example of TOOLMSG Output for RESIZE

ICETOOL Mini-User Guide

43

* RESIZE - creates larger records from smaller records, or * smaller records from larger records. * Example: create 40 byte output records from 10 byte input * records. RESIZE FROM(L10) TO(L40) TOLEN(40) ICE627I 0 DFSORT CALL 0008 FOR COPY FROM L10 TO L40 COMPLETED ICE659I 0 RECORDS RESIZED FROM 00010 BYTES TO 00040 BYTES ICE602I 0 OPERATION RETURN CODE: 00

SELECT Operator Details

Syntax
SELECT FROM(indd) TO(outdd) ON(p,m,f) ... DISCARD(savedd) ON(VLEN) ALLDUPS VSAMTYPE(x) UZERO USING(xxxx) NODUPS HIGHER(x) LOWER(y) EQUAL(v) FIRST FIRST(u) LAST FIRSTDUP FIRSTDUP(w) LASTDUP

Function
Selects records from the indd data set for inclusion in the outdd data set based on meeting criteria for the number of times specified numeric and/or character field values occur. From 1 to 10 ON fields can be specified. All ON fields are used to determine the value count (that is, the number of times the ON values occur) to be matched against the criteria. The records selected can be limited to those with duplicate values, non-duplicate values, values that occur less than, equal to or more than n times, or the first, first n, or last record with each unique or duplicate value. DISCARD(savedd) can be used to save the records which do not meet the criteria (that is, the discarded records), in the savedd data set. DISCARD(savedd) may be used with or without TO(outdd). The DFSORT control statements in xxxxCNTL are used if USING(xxxx) is specified.

Examples
SELECT FROM(INPUT) TO(DUPS) ON(11,8,CH) ON(30,44,CH) ALLDUPS SELECT FROM(IN) TO(OUT1) ON(29,5,FS) HIGHER(3) SELECT FROM(DATAX) TO(NEWEST) ON(135,20,ZD) LASTDUP USING(CTL1) SELECT FROM(BOOKS) TO(PUBLISHR) ON(29,10,UFF) FIRST(3) DISCARD(SAVEREST)

44

DFSORT/ICETOOL

Required Operands
FROM - the ddname of the input data set. You must supply a DD statement for the ddname you specify. TO - the ddname of the output data set for the selected records. You must supply a DD statement for the ddname you specify. DISCARD - the ddname of the output data set for the records which are not selected. You must supply a DD statement for the ddname you specify. TO(outdd) and DISCARD(savedd) may be used together or separately. ON - a field to be used for this operation. From 1 to 10 ON fields can be specified. (p,m,f) gives the position, length and format of a numeric or character field. A field must not extend beyond position 32752 or the end of the record. VLEN is equivalent to ON(1,2,BI) and for variable-length records, represents the record length for each record. A description of each type of field is given below.
Format Code BI FI PD ZD CH CSF/FS UFF SFF VLEN Length 1-1500 bytes 1-256 bytes 1-16 bytes 1-31 bytes 1-4000 bytes 1-32 bytes 1-44 bytes 1-44 bytes n/a Description Unsigned binary Signed fixed-point Signed packed decimal Signed zoned decimal Character Floating sign Unsigned free form numeric Signed free form numeric Record length for VLR (1,2,BI)

ALLDUPS, NODUPS, HIGHER, LOWER, EQUAL, FIRST, LAST, FIRSTDUP, LASTDUP - defines the criteria against which the value counts are to be matched. x, y, v, u and w must be specified as n or +n where n can 0 to 99.

Optional Operands
VSAMTYPE - the record format for a VSAM input data set (F or V). UZERO - causes -0 to be treated as unsigned, that is, as +0. USING - the first 4 characters of the ddname (xxxxCNTL) for the DFSORT control statement data set. You must supply a DD statement for xxxxCNTL if you specify USING(xxxx). If used, the xxxxCNTL data set should only contain one or more of these statements: INCLUDE or OMIT - deleted records are not processed by SELECT. INREC - the reformatted records are processed by SELECT. SORT - additional sort fields can be specified after p,m,f,A fields corresponding to ON(p,m,f) fields. The additional sort fields are used for sorting, but not for selecting. OPTION - for optional parameters like MAINSIZE. OUTFIL - the selected records are processed by OUTFIL. With TO(outdd), use a corresponding OUTFIL statement with FNAMES=outdd. With DISCARD(savedd), use a corresponding OUTFIL statement with
ICETOOL Mini-User Guide

45

FNAMES=savedd. With TO(outdd) and DISCARD(savedd), use corresponding OUTFIL statements with FNAMES=outdd and FNAMES=savedd.

Symbols
Symbols for fields can be used instead of p,m,f and p,m in the ON operand. Symbols for decimal constants can be used instead of n and +n in the HIGHER, LOWER, EQUAL, FIRST and FIRSTDUP operands.

Notes
The DFSORT DYNALLOC option is used to ensure that work space is available for the sort performed for the SELECT operation. Tape work data sets cannot be used with ICETOOL.

Example of TOOLMSG Output for SELECT

* * * * * * * * * ICE627I ICE628I ICE638I ICE602I 0 0 0 0 SELECT - selects records from a data set for inclusion in an output data set based on meeting criteria for the number of times specified numeric or character field values occur (e.g. only duplicate values). Records that are not selected can be saved in a separate output data set. Example: selects records from the IN1 data set, for the SEL1 data set, whose ON field occurs only once (i.e, only records with no duplicate ON field values). SELECT FROM(IN1) TO(SEL1) ON(30,2,PD) NODUPS DFSORT CALL 0009 FOR SORT FROM IN1 TO SEL1 COMPLETED RECORD COUNT: 000000000000072 NUMBER OF RECORDS RESULTING FROM CRITERIA: 000000000000013 OPERATION RETURN CODE: 00

46

DFSORT/ICETOOL

SORT Operator Details

Syntax
SORT FROM(indd) USING(xxxx) TO(outdd,...) VSAMTYPE(x) JKFROM LOCALE(name) SERIAL LOCALE(CURRENT) LOCALE(NONE)

Function
Sorts the indd data set to the outdd data sets (up to 10) using the the DFSORT control statements in xxxxCNTL. You must supply a DFSORT SORT statement in xxxxCNTL to indicate the control fields for the sort. Additional DFSORT control statements and options can be used to sort a subset of the input records (INCLUDE or OMIT statement; SKIPREC and STOPAFT options; OUTFIL INCLUDE, OMIT, SAVE, STARTREC, ENDREC, ACCEPT, SAMPLE, SPLIT, SPLITBY and SPLIT1R operands), reformat records for output (INREC, OUTREC and OUTFIL statements), and so on. See z/OS DFSORT Application Programming Guide for complete details of DFSORT control statements and options.

Examples
SORT FROM(A) TO(B,C,D) USING(DEPT) SORT FROM(VSAMIN) TO(VSAMOUT1) USING(VSAM) VSAMTYPE(F) LOCALE(DA_DK) SORT FROM(MASTER) USING(MULT) DEPTCNTL might contain the following: //DEPTCNTL DD * SORT FIELDS=(15,3,A,27,4,D),FORMAT=PD INREC OVERLAY=(22:5,8,SQZ=(SHIFT=LEFT)) /* VSAMCNTL might contain the following: //VSAMCNTL DD * SORT FIELDS=(27,12,CH,A) /* MULTCNTL might contain the following: //MULTCNTL DD * SORT FIELDS=(18,3,ZD,A,43,2,BI,D) OUTFIL FNAMES=DEPT1,INCLUDE=(5,3,CH,EQ,C'D01') OUTFIL FNAMES=DEPT2,INCLUDE=(5,3,CH,EQ,C'D02') OUTFIL FNAMES=DEPT3,INCLUDE=(5,3,CH,EQ,C'D03') OUTFIL FNAMES=REST,SAVE /* Note that DFSORT's OUTFIL INCLUDE and SAVE features are used here to create four different subset data sets using a single pass over the input data set. SAVE allows you to easily include the records that are not included in

ICETOOL Mini-User Guide

47

any other OUTFIL data set. Complete details on this feature of OUTFIL as well as its many other features can be found in DFSORT Application Programming Guide.

Required Operands
FROM or JKFROM FROM - the ddname of the input data set. You must supply a DD statement for the ddname you specify. JKFROM - used for a JOINKEYS application. You must provide a USING(xxxx) operand. In xxxxCNTL, you must provide a JOINKEYS statement with F1=ddname1 for the F1 file and a JOINKEYS statement with F2=ddname2 for the F2 file, as well as JOIN and REFORMAT statements as needed. USING - the first 4 characters of the ddname (xxxxCNTL) for the DFSORT control statement data set. You must supply a DD statement for xxxxCNTL. You must supply a DFSORT SORT statement in xxxxCNTL.

Optional Operands
TO - the ddnames of 1 to 10 output data sets. You must supply DD statements for the ddnames you specify. VSAMTYPE - the record format for a VSAM input data set (F or V). LOCALE - overrides the installation default for locale processing. SERIAL - causes OUTFIL processing not to be used for multiple outdd data sets. SERIAL is not recommended because it imposes data set restrictions and can degrade performance.

Notes
If you use OUTFIL statements in xxxxCNTL to specify your output data sets, you do not need to specify TO. The DFSORT DYNALLOC option is used to ensure that work space is available for the sort. Tape work data sets cannot be used with ICETOOL.

Example of TOOLMSG Output for SORT

SORT - sorts a data set to one or more output data sets. Multiple output is handled using a single pass over the input. Example: sort the IN1 data set to the OUT1 data set using the DFSORT control statements in the CTL1CNTL data set. SORT FROM(IN1) TO(OUT1) USING(CTL1) ICE606I 0 DFSORT CALL 0010 FOR SORT FROM IN1 TO OUT1 USING CTL1CNTL COMPLETED ICE602I 0 OPERATION RETURN CODE: 00 * * * * *

48

DFSORT/ICETOOL

SPLICE Operator Details

Syntax
SPLICE FROM(indd) TO(outdd) ON(p,m,f) ... WITH(p,m) ... WITHALL KEEPNODUPS KEEPBASE VSAMTYPE(x) UZERO USING(xxxx) WITHANY WITHEACH VLENMAX VLENOVLY

Function
Splices together specified fields from records with matching numeric or character field values (that is, duplicate values), but different information. This makes it possible to join fields from different types of input records to create an output record with information from two or more records. From 1 to 10 ON fields can be specified. All ON fields are used to determine if records match. Typically, you will want to reformat the records from two or more data sets to a temporary MOD data set, and use that temporary MOD data set as input to the SPLICE operator. By default, the first duplicate is spliced with all of the WITH fields from the last duplicate. From 1 to 50 WITH fields can be specified. WITHALL can be used to splice the first duplicate with all of the WITH fields from the second and subsequent duplicates. WITHANY can be used to splice the first duplicate with nonblank WITH fields from the second and subsequent duplicates. WITHEACH can be used to splice the first duplicate with one WITH field from the second and subsequent duplicates in turn. By default, non-matching records are not kept. KEEPNODUPS can be used to keep non-matching records. By default, the base record is not kept. KEEPBASE can be used to keep the base record. By default, for variable-length records, the length of the base record is used as the length of the spliced record. VLENMAX can be used to set the length of the spliced record to the maximum length of the base record or overlay record. VLENOVLY can be used to set the length of the spliced record to the length of the overlay record. The DFSORT control statements in xxxxCNTL are used if USING(xxxx) is specified.

Examples
SPLICE FROM(T1) TO(OUT1) ON(11,8,CH) ON(30,44,CH) WITH(1,100) SPLICE FROM(T2) TO(OUT2) ON(11,8,CH) WITHALL WITH(51,50) WITH(101,75) KEEPNODUPS USING(CTL1) SPLICE FROM(ROWS) TO(OUTPUT) ON(15,5,ZD) WITHANY WITH(21,20) WITH(41,20) WITH(61,20)

ICETOOL Mini-User Guide

49

Required Operands
FROM - the ddname of the input data set. You must supply a DD statement for the ddname you specify. TO - the ddname of the output data set for the spliced records. You must supply a DD statement for the ddname you specify. ON - a field to be used for this operation. From 1 to 10 ON fields can be specified. (p,m,f) gives the position, length and format of a numeric or character field. A field must not extend beyond position 32752 or the end of the record. A description of each type of field is given below.
Format Code BI FI PD ZD CH CSF/FS UFF SFF Length 1-1500 bytes 1-256 bytes 1-16 bytes 1-31 bytes 1-4000 bytes 1-32 bytes 1-44 bytes 1-44 bytes Description Unsigned binary Signed fixed-point Signed packed decimal Signed zoned decimal Character Floating sign Unsigned free form numeric Signed free form numeric

WITH(p,m) - a field to be spliced from the second or subsequent duplicate record to the first duplicate record. From 1 to 50 WITH fields can be specified. (p,m) gives the position and length of the field.

Optional Operands
WITHALL - the first duplicate is spliced with all of the specified WITH fields from the second duplicate, and then from each subsequent duplicate in turn (overriding the default of splicing the first duplicate with all of the specified WITH fields from the last duplicate). WITHANY - the first duplicate is spliced with all of the specified nonblank WITH fields from each subsequent duplicate (overriding the default of splicing the first duplicate with all of the specified WITH fields from the last duplicate). WITHEACH - the first duplicate is spliced with one specified WITH field from each subsequent duplicate (overriding the default of splicing the first duplicate with all of the specified WITH fields from the last duplicate). KEEPNODUPS - non-duplicates are kept (unchanged) along with the spliced records (overriding the default of deleting non-duplicates). KEEPBASE - the base records are kept (unchanged) along with the spliced records (overriding the default of deleting the base records). VSAMTYPE - the record format for a VSAM input data set (F or V). UZERO - causes -0 to be treated as unsigned, that is, as +0. USING - the first 4 characters of the ddname (xxxxCNTL) for the DFSORT control statement data set. You must supply a DD statement for xxxxCNTL if you specify USING(xxxx). If used, the xxxxCNTL data set should only contain one or more of these statements: INCLUDE or OMIT - deleted records are not processed by SPLICE.

50

DFSORT/ICETOOL

 INREC - the reformatted records are processed by SPLICE. OPTION - for optional parameters like MAINSIZE. OUTFIL - the selected records (spliced records, and unspliced records if KEEPNODUPS or KEEPBASE is specified) are processed by OUTFIL. With TO(outdd), use a corresponding OUTFIL statement with FNAMES=outdd. VLENMAX - for variable-length records, the length of the spliced record is set to the maximum length of the base record or overlay record (overriding the default of setting the length of the spliced record to the length of the base record). VLENOVLY - for variable-length records, the length of the spliced record is set to the length of the overlay record (overriding the default of setting the length of the spliced record to the length of the base record).

Symbols
Symbols for fields can be used instead of p,m,f and p,m in the ON operand and instead of p,m in the WITH operand.

Notes
The DFSORT DYNALLOC option is used to ensure that work space is available for the sort performed for the SPLICE operation. Tape work data sets cannot be used with ICETOOL.

Example of TOOLMSG Output for SPLICE

* * * * * * * * * * * * ICE627I ICE628I ICE638I ICE602I 0 0 0 0 SPLICE - splices together specified fields from records that have the same specified numeric or character field values (i.e., duplicate values), but different information. Specified fields from two or more records can be combined to create an output record. The fields to be spliced can originate from records in different data sets, so various "join" and "match" operations can be performed. Example: for ON fields that occur more than once (i.e., duplicate ON field values) in the CONCT data set, splices the WITH field from the last duplicate record into the first duplicate record. SPLICE FROM(CONCT) TO(COMBINE) ON(11,5,CH) WITH(41,20) DFSORT CALL 0011 FOR SORT FROM CONCT TO COMBINE COMPLETED RECORD COUNT: 000000000000019 NUMBER OF RECORDS RESULTING FROM CRITERIA: 000000000000007 OPERATION RETURN CODE: 00

ICETOOL Mini-User Guide

51

STATS Operator Details

Syntax
STATS FROM(indd) ON(p,m,f) VSAMTYPE(x) LMSG ON(VLEN)

Function
Prints messages in TOOLMSG containing the minimum, maximum, average and total for up to 10 specified numeric fields. The average is calculated by dividing the total by the record count and rounding down to the nearest integer.

Examples
STATS FROM(DATA1) ON(VLEN) ON(15,4,ZD) STATS FROM(VSAMIN) ON(5,8,BI) ON(20,2,PD) ON(12,6,FS) ON(47,3,FI) VSAMTYPE(F)

Required Operands
FROM - the ddname of the input data set. You must supply a DD statement for the ddname you specify. ON - a field to be used for this operation. (p,m,f) gives the position, length and format of a numeric field. A field must not extend beyond position 32752 or the end of the record. VLEN is equivalent to ON(1,2,BI) and for variable-length records, represents the record length for each record. A description of each type of field is given below.
Format Code BI FI PD ZD CSF/FS UFF SFF VLEN Length 1-8 bytes 1-8 bytes 1-16 bytes 1-31 bytes 1-32 bytes 1-44 bytes 1-44 bytes n/a Description Unsigned binary Signed fixed-point Signed packed decimal Signed zoned decimal Floating sign Unsigned free form numeric Signed free form numeric Record length for VLR (1,2,BI)

Optional Operand
VSAMTYPE - the record format for a VSAM input data set (F or V). LMSG - the minimum, maximum, average and total for all numeric fields are printed using messages that display 31 digits (overriding the default of printing messages that display 15 digits when possible).

52

DFSORT/ICETOOL

Symbols
Symbols for fields can be used instead of p,m,f and p,m in the ON operand.

Note
If the total for a field overflows, ICETOOL continues processing, but prints asterisks for the average and total for that field.

Example of TOOLMSG Output for STATS

* * * * * * * ICE627I ICE628I ICE607I ICE608I ICE609I ICE607I ICE608I ICE609I ICE607I ICE608I ICE609I ICE602I 0 0 0 0 0 0 0 0 0 0 0 0 STATS - prints messages in TOOLMSG containing the minimum, maximum, average, and total for specified numeric fields in a data set. Example: print the minimum, maximum, average and total values for the three VLRIN data set ON fields. For variable-length records, ON(VLEN) gives statistics about the length of the records. STATS FROM(VLRIN) ON(VLEN) ON(12,2,ZD) ON(18,5,FS) DFSORT CALL 0012 FOR COPY FROM VLRIN TO E35 EXIT COMPLETED RECORD COUNT: 000000000000017 STATISTICS FOR (VLEN) : MINIMUM: +000000000000058, MAXIMUM: +000000000000079 AVERAGE: +000000000000068, TOTAL : +000000000001171 STATISTICS FOR (12,2,ZD) : MINIMUM: -000000000000064, MAXIMUM: +000000000000082 AVERAGE: +000000000000010, TOTAL : +000000000000177 STATISTICS FOR (18,5,FS) : MINIMUM: -000000000003892, MAXIMUM: +000000000018723 AVERAGE: +000000000001127, TOTAL : +000000000019168 OPERATION RETURN CODE: 00

ICETOOL Mini-User Guide

53

SUBSET Operator Details

Syntax
SUBSET FROM(indd) TO(outdd) KEEP INPUT DISCARD(savedd) REMOVE OUTPUT HEADER FIRST HEADER(u) FIRST(u) TRAILER RRN(q) ... LAST RRN(q,r) TRAILER(v) RRN(q,*) LAST(v)

USING(xxxx) VSAMTYPE(x)

Function
Selects input or output records from the indd data set for inclusion in the outdd data set based on meeting criteria for keeping or removing the first n records, specific relative record numbers, and/or the last n records. From 1 to 300 relative records or ranges of relative records can be specified. DISCARD(savedd) can be used to save the records which do not meet the criteria (that is, the discarded records). DISCARD(savedd) may be used with or without TO(outdd). The DFSORT control statements in xxxxCNTL are used if USING(xxxx) is specified.

Examples
SUBSET FROM(INPUT) TO(OUTPUT) REMOVE INPUT HEADER TRAILER SUBSET FROM(FILE1) TO(FILE2) REMOVE INPUT RRN(8) RRN(21,25) RRN(5001,*) SUBSET FROM(IN1) TO(OUT1) REMOVE OUTPUT LAST(5) USING(SRT1) SRT1CNTL might contain the following: SORT FIELDS=(11,5,CH,A,21,6,SFF,D)

Required Operands
FROM - the ddname of the input data set. You must supply a DD statement for the ddname you specify. TO - the ddname of the output data set for the selected records (the records that are kept or not removed according to the specified criteria). You must supply a DD statement for the ddname you specify. DISCARD - the ddname of the output data set for the records which are not selected. You must supply a DD statement for the ddname you specify. TO(outdd) and DISCARD(savedd) may be used together or separately. KEEP, REMOVE - indicates whether the records that meet the criteria are kept or removed. INPUT, OUTPUT - indicates whether the criteria are to be applied to the input records or output records.

54

DFSORT/ICETOOL

Optional Operands
HEADER, FIRST, TRAILER, LAST, RRN - specifies the header records (first u records), trailer records (last v records) and/or relative records (relative record q, or relative records q to r) to be kept or removed. RRN(q,*) can be used to specify relative records q through the last record. From 1 to 300 RRN operands can be specified. u, v, q and r must be specified as n or +n where n can be 1 to 999999999999999. USING - the first 4 characters of the ddname (xxxxCNTL) for the DFSORT control statement data set. You must supply a DD statement for xxxxCNTL if you specify USING(xxxx). See z/OS DFSORT Application Programming Guide for details of the DFSORT control statements you can use with SUBSET. VSAMTYPE - the record format for a VSAM input data set (F or V).

Symbols
Symbols for decimal constants can be used instead of n and +n in the HEADER, FIRST, TRAILER, LAST and RRN operands.

Notes
If you specify a DFSORT SORT statement in xxxxCNTL, the DFSORT DYNALLOC option is used to ensure that work space is available for the sort performed for the SUBSET operation. Tape work data sets cannot be used with ICETOOL.

Example of TOOLMSG Output for SUBSET

SUBSET - selects records from a data set based on keeping or removing header records (the first n records), relative records, or trailer records (the last n records). Records that are not selected can be saved in a separate output data set. Example: Copies records 5, 21 and 31-33 from the IN1 data set to the SUB1 data set. SUBSET FROM(IN1) TO(SUB1) INPUT KEEP RRN(5) RRN(21) RRN(31,33) ICE627I 0 DFSORT CALL 0013 FOR COPY FROM IN1 TO SUB1 COMPLETED ICE602I 0 OPERATION RETURN CODE: 00 * * * * * * *

ICETOOL Mini-User Guide

55

UNIQUE Operator Details

Syntax
UNIQUE FROM(indd) ON(p,m,f) VSAMTYPE(x) UZERO ON(VLEN)

Function
Prints a message in TOOLMSG containing the count of unique values for a specified numeric or character field.

Examples
UNIQUE FROM(INPUT) ON(20,40,CH) UNIQUE FROM(DATA) ON(5,3,ZD)

Required Operands
FROM - the ddname of the input data set. You must supply a DD statement for the ddname you specify. ON - a field to be used for this operation. (p,m,f) gives the position, length and format of a numeric field. A field must not extend beyond position 32752 or the end of the record. VLEN is equivalent to ON(1,2,BI) and for variable-length records, represents the record length for each record. A description of each type of field is given below.
Format Code BI FI PD ZD CH CSF/FS UFF SFF VLEN Length 1-256 bytes 1-256 bytes 1-32 bytes 1-32 bytes 1-4000 bytes 1-32 bytes 1-44 bytes 1-44 bytes n/a Description Unsigned binary Signed fixed-point Signed packed decimal Signed zoned decimal Character Floating sign Unsigned free form numeric Signed free form numeric Record length for VLR (1,2,BI)

Optional Operands
VSAMTYPE - the record format for a VSAM input data set (F or V). UZERO - causes -0 to be treated as unsigned, that is, as +0.

Symbols
Symbols for fields can be used instead of p,m,f and p,m in the ON operand.

56

DFSORT/ICETOOL

Notes
The DFSORT DYNALLOC option is used to ensure that work space is available for the sort performed for the UNIQUE operation. Tape work data sets cannot be used with ICETOOL.

Example of TOOLMSG Output for UNIQUE

* * * * ICE627I ICE628I ICE610I ICE602I 0 0 0 0 UNIQUE - prints a message in TOOLMSG containing the count of unique values for a specified numeric or character field. Example: print the count of unique values in the OUT1 data set ON field. UNIQUE FROM(OUT1) ON(30,2,PD) DFSORT CALL 0014 FOR SORT FROM OUT1 TO E35 EXIT COMPLETED RECORD COUNT: 000000000000040 NUMBER OF UNIQUE VALUES FOR (30,2,PD) : 000000000000011 OPERATION RETURN CODE: 00

ICETOOL Mini-User Guide

57

VERIFY Operator Details

Syntax
VERIFY FROM(indd) ON(p,m,f) NOSIGN LIMIT(n) VSAMTYPE(x)

Function
Examines up to 10 specified decimal fields in a data set and prints a message in TOOLMSG identifying each invalid value found for each field. A decimal value is considered invalid under one of the following circumstances: it contains A-F as a digit (example: a PD field of 00AF) it contains 0-9 as a sign and the NOSIGN operand is not specified (example: a ZD field of F235).

Examples
VERIFY FROM(NEW) ON(22,16,PD) ON(7,9,PD) VERIFY FROM(DATA) ON(28,5,PD) ON(28000,18,ZD) ON(4,7,PD) NOSIGN LIMIT(10)

Required Operands
FROM - the ddname of the input data set. You must supply a DD statement for the ddname you specify. ON - a field to be used for this operation. (p,m,f) gives the position, length and format of a numeric field. A field must not extend beyond position 32752 or the end of the record. A description of each type of field is given below.
Format Code PD ZD Length 1-16 bytes 1-18 bytes Description Signed packed decimal Signed zoned decimal

Optional Operands
NOSIGN - the sign of the decimal values is not to be checked for validity. LIMIT - a limit for the number of invalid decimal values (overriding the default of 200). If n invalid decimal values are found, ICETOOL terminates the operation. VSAMTYPE - the record format for a VSAM input data set (F or V).

Symbols
Symbols for fields can be used instead of p,m,f and p,m in the ON operand.

58

DFSORT/ICETOOL

Notes
Values with invalid digits are also identified for the DISPLAY, OCCUR, RANGE, and STATS operators. For each invalid digit found, ICETOOL identifies the relative record number in which the field appears and the value of the field (in hexadecimal). The DISPLAY operator can be used to print a report identifying the relative record number, hexadecimal value and associated fields for each invalid (and valid) decimal value. See DFSORT Application Programming Guide, under "DISPLAY Operator", for an example.

Example of TOOLMSG Output for VERIFY

* * * * * * ICE618A 0 ICE618A 0 ICE618A 0 ICE627I 0 ICE628I 0 ICE602I 0 VERIFY - examines specified decimal fields in a data set and prints a message in TOOLMSG identifying each invalid value found for each field. Example: identify all values in the two IN2 data set decimal ON fields that have invalid digits (A-F) and/or invalid signs (0-9). VERIFY FROM(IN2) ON(10,2,ZD) ON(41,6,PD) INVALID (10,2,ZD) VALUE - RECORD: 000000000000003, HEX VALUE FAF2 INVALID (10,2,ZD) VALUE - RECORD: 000000000000006, HEX VALUE F134 INVALID (41,6,PD) VALUE - RECORD: 000000000000007, HEX VALUE 000000105739 DFSORT CALL 0015 FOR COPY FROM IN2 TO E35 EXIT COMPLETED RECORD COUNT: 000000000000008 OPERATION RETURN CODE: 12

ICETOOL Mini-User Guide

59

Symbol Processing
A DFSORT symbol is a name (preferably something meaningful) that represents a field or a constant. Sets of symbols, also called mappings, can be used to describe a group of related fields and constants such as the information in a particular type of record. Such mappings allow you to refer to fields and constants by their symbols, freeing you from having to know the position, length and format of a field or the value of a constant you want to use. DFSORT's symbol processing feature gives you a powerful, simple and flexible way to create symbol mappings for your own frequently used data. In addition, you can obtain IBM-created symbol mappings and sample jobs for data associated with RACF, DFSMSrmm and DCOLLECT. For details, visit the DFSORT home page at URL: http://www.ibm.com/storage/dfsort DFSORT symbols can be up to 50 characters, are case-sensitive and can include underscores and hyphens. Thus, you can create meaningful, descriptive names for your symbols, such as Price_of_Item (or Price-of-Item), making them easy to remember, use and understand. You can define and use a symbol for any field or constant in the following ICETOOL operators: COUNT, DATASORT, DISPLAY, OCCUR, RANGE, SELECT, SPLICE, STATS, SUBSET, UNIQUE and VERIFY. You can also use symbols in the DFSORT control statements you specify for an ICETOOL run. Two DD statements are used for symbol processing as follows: SYMNAMES: activates symbols processing and defines the symbol data sets to be used. SYMNOUT: can be used to define a data set in which the original symbols and the symbol table built by ICETOOL will be displayed. Here's a sample ICETOOL job that shows how symbols can be used for ICETOOL operators and DFSORT control statements. See DFSORT Application Programming Guide for a complete explanation of DFSORT Symbols. //TOOLSYM JOB ... //DOIT EXEC PGM=ICETOOL //TOOLMSG DD SYSOUT=* //DFSMSG DD SYSOUT=* //SYMNAMES DD DSN=MY.CUSTOMER.SYMBOLS,DISP=SHR //SYMNOUT DD SYSOUT=* //IN DD DSN=MY.CUSTOMER.INPUT,DISP=SHR //OUT DD DSN=&O,UNIT=SYSDA,SPACE=(CYL,(5,5),RLSE), // DISP=(,PASS) //LIST1 DD SYSOUT=* //TOOLIN DD * RANGE FROM(IN) ON(Customer_Balance) LOWER(Stop_Check) SORT FROM(IN) TO(OUT) USING(CTL1) DISPLAY FROM(OUT) LIST(LIST1) BLANK WIDTH(133) TITLE(Title) DATE(4MD/) PAGE HEADER(Head1) ON(Customer_Name) HEADER(Head2) ON(Customer_Balance,C1) HEADER(Head3) ON(Customer_Flags,HEX) /* //CTL1CNTL DD * SORT FIELDS=(Customer_Balance,D,Customer_Name,A) INCLUDE COND=((Dept_Code,EQ,Research,OR, Dept_Code,EQ,Marketing), AND,Customer_Balance,GT,Gift)

60

DFSORT/ICETOOL

Calling ICETOOL from a Program

ICETOOL can be called from an assembler program using LINK, ATTACH, or XCTL, and standard linkage conventions. When all operators have been processed, ICETOOL returns to the calling program with register 15 (R15) set to the highest operation return code encountered. Two different interfaces are available: TOOLIN Interface: You supply ICETOOL statements in the TOOLIN data set. ICETOOL prints messages in the TOOLMSG data set, but does not return information directly to your program. Parameter List Interface You supply ICETOOL statements in a parameter list. ICETOOL prints messages in the TOOLMSG data set and also returns information in the parameter list for use by your program. For complete details of ICETOOL's calling program interface, see DFSORT Application Programming Guide.

ICETOOL Mini-User Guide

61

62

DFSORT/ICETOOL

Appendix A. Edit Masks for DISPLAY and OCCUR Formatting

The table below describes the available masks and shows how the values 12345678 and -1234567 would be printed for each mask. In the pattern: d is used to represent a decimal digit (0-9) w is used to represent a leading sign that will be blank for a positive value or - for a negative value x is used to represent a trailing sign that will be blank for a positive value or - for a negative value y is used to represent a leading sign that will be blank for a positive value or ( for a negative value z is used to represent a trailing sign that will be blank for a positive value or ) for a negative value Mask A0 A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 B6 C1 C2 C3 C4 C5 C6 D1 D2 D3 D4 D5 D6 Pattern wddddddddddddddddddddddddddddddd wd,ddd,ddd,ddd,ddd,ddd,ddd,ddd,ddd,ddd,ddd wd.ddd.ddd.ddd.ddd.ddd.ddd.ddd.ddd.ddd.ddd wd ddd ddd ddd ddd ddd ddd ddd ddd ddd ddd wd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd d ddd ddd ddd ddd ddd ddd ddd ddd ddd dddx wddd,ddd,ddd,ddd,ddd,ddd,ddd,ddd,ddd,ddd.d wddd.ddd.ddd.ddd.ddd.ddd.ddd.ddd.ddd.ddd,d wddd ddd ddd ddd ddd ddd ddd ddd ddd ddd,d wddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd.d wddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd,d ddd ddd ddd ddd ddd ddd ddd ddd ddd ddd,dx wdd,ddd,ddd,ddd,ddd,ddd,ddd,ddd,ddd,ddd.dd wdd.ddd.ddd.ddd.ddd.ddd.ddd.ddd.ddd.ddd,dd wdd ddd ddd ddd ddd ddd ddd ddd ddd ddd,dd wdd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd.dd wdd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd,dd dd ddd ddd ddd ddd d ddd ddd ddd ddd,ddx wd,ddd,ddd,ddd,ddd,ddd,ddd,ddd,ddd,ddd.ddd wd.ddd.ddd.ddd.ddd.ddd.ddd.ddd.ddd.ddd,ddd wd ddd ddd ddd ddd ddd ddd ddd ddd ddd,ddd wd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd.ddd wd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd,ddd d ddd ddd ddd ddd ddd ddd ddd ddd ddd,dddx 12345678 12345678 12,345,678 12.345.678 12 345 678 12'345'678 12 345 678 1,234,567.8 1.234.567,8 1 234 567,8 1'234'567.8 1'234'567,8 1 234 567,8 123,456.78 123.456,78 123 456,78 123'456.78 123'456,78 123 456,78 12,345.678 12.345,678 12 345,678 12'345.678 12'345,678 12 345,678 -1234567 -1234567 -1,234,567 -1.234.567 -1 234 567 -1'234'567 1 234 567-123,456.7 -123.456,7 -123 456,7 -123'456.7 -123'456,7 123 456,7-12,345.67 -12.345,67 -12 345,67 -12'345.67 -12'345,67 12 345,67-1,234.567 -1.234,567 -1 234,567 -1'234.567 -1'234,567 1 234,567-

Appendix A. Edit Masks for DISPLAY and OCCUR Formatting

63

Mask E1 E2 E3 E4 F1 F2 F3 F4 F5 G1 G2 G3 G4 G5 G6

Pattern yd,ddd,ddd,ddd,ddd,ddd,ddd,ddd,ddd,ddd,dddz yd.ddd.ddd.ddd.ddd.ddd.ddd.ddd.ddd.ddd.dddz yd ddd ddd ddd ddd ddd ddd ddd ddd ddd dddz yd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'dddz ydd,ddd,ddd,ddd,ddd,ddd,ddd,ddd,ddd,ddd.ddz ydd.ddd.ddd.ddd.ddd.ddd.ddd.ddd.ddd.ddd,ddz ydd ddd ddd ddd ddd ddd ddd ddd ddd ddd,ddz ydd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd.ddz ydd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd,ddz wddd,ddd,ddd,ddd,ddd,ddd,ddd,ddd,ddd.dddd wddd.ddd.ddd.ddd.ddd.ddd.ddd.ddd.ddd,dddd wddd ddd ddd ddd ddd ddd ddd ddd ddd,dddd wddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd.dddd wddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd'ddd,dddd ddd ddd ddd ddd ddd ddd ddd ddd ddd,ddddx

12345678 12,345,678 12.345.678 12 345 678 12'345'678 123,456.78 123.456,78 123 456,78 123'456.78 123'456,78 1,234.6678 1.234,5678 1 234,5678 1'234.5678 1'234,5678 1 234,5678

-1234567 (1,234,567) (1.234.567) (1 234 567) (1'234'567) (12,345.67) (12.345,67) (12 345,67) (12'345.67) (12'345,67) -123.4567 -123,4567 -123,4567 -123.4567 -123,4567 123,4567-

64

DFSORT/ICETOOL