KM26 Magnetic Liquid Level Gauge

CONFIGURATION GUIDE

K-TEK 18321 Swamp Road Prairieville, Louisiana 70769 USA Telephone: (1) 225-673-6100 Fax: (1) 225-673-2525

KM26-0202-1 Rev E (07-2005) For latest version of this configuration guide, visit www.ktekcorp.com.

Email: [email protected] Website: www.ktekcorp.com

KM26 Magnetic Level Gauge Configuration Guide

To request a quotation for a KM26 Magnetic Level Gauge: 1. Complete the Quotation Request Form on pages 31 and 32 or 2. Use this Configuration Guide to Select a Model Number and provide additional information such as process pressure, temperature, and specific gravity. Submit Request to K-Tek Corporation via e-mail to [email protected] or via fax to 225-673-2525. An online request is available on K-TEKs website (www.ktekcorp.com).
QuikShip Program: K-TEK can provide KM26S Magnetic Level Gauges in sixteen (16) different custom configurations ready for shipment within 15 working days ARO. These custom configurations can be supplied with a measuring length up to 18 feet (216) with transmitter and switch accessories.

NEW

Use the QuikShip chart below to select the model that best fits your application, then specify accessories (indicator type, transmitter, switches, etc) on the applicable QS drawing(s) that have been provided in the subsequent pages.

QuikShip #
QS1 QS2 QS3 QS4 QS5 QS6 QS7 QS8 QS9 QS10 QS11 QS12 QS13 QS14 QS15 QS16

Connection Size
2 150# RF WN Flange 2 150# RF WN Flange 2 150# RF WN Flange 2 150# RF WN Flange 2 300# RF WN Flange 2 300# RF WN Flange 2 300# RF WN Flange 2 300# RF WN Flange 1 MNPT Nipple 1 MNPT Nipple 1 MNPT Nipple 1 MNPT Nipple 1 MNPT Nipple 1 MNPT Nipple 1 MNPT Nipple 1 MNPT Nipple

Specific Gravity Range

> 0.70 > 0.70 > 0.50 > 0.50 > 0.80 > 0.80 > 0.57 > 0.57 > 0.70 > 0.70 > 0.50 > 0.50 > 0.80 > 0.80 > 0.52 > 0.52

Material Type
304SS 316SS 304SS 316SS 304SS 316SS 304SS 316SS 304SS 316SS 304SS 316SS 304SS 316SS 304SS 316SS

Page #
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Example: Application Requirements: Total level, Oil, Min SG of 0.6, Flange Process Connections, 150# / 300F operating pressure/temperature, customer requests 316SS KTEK Recommended QS Model: QS4 Very Important: QuikShip drawings are available in this document and on K-TEKs website (www.ktekcorp.com) and should be completed via fax (225-673-2525) or email ([email protected]) for immediate processing. 2

DWG NO. KM26QS1

SPECIFY EACH OF THE FOLLOWING: _______________ = MEASURING LENGTH (ML); (18'-0" Max.) _______________ = OPERATING SPECIFIC GRAVITY (0.70 Min.) _______________ = OPERATING TEMPERATURE (F) _______________ = OPERATING PRESSURE (PSIG) 1/2" NPT VENT PLUG _______________________ = FLUID TYPE 2" 150# RF WN FLANGE 6-1/2" INDICATOR TYPE (WITH GLASS TUBE): _____ FLUORESCENT ORANGE SHUTTLE (STD.) _____ YELLOW / BLACK MAGNETIC BAR GRAPH _____ RED / WHITE MAGNETIC BAR GRAPH SCALE / RULER INDICATION: _____ FEET / INCHES WITH 1/2" DIVISIONS (STD.) _____ METERS / CENTIMETERS WITH 1 CM DIVISIONS ML _______________________ = TAG NO. MAX TEMP/PRESS. LIMITS: 275 PSIG @ 100F 235 PSIG @ 200F 215 PSIG @ 300F

3-13/16" 3-5/8"

SCALE ASSEMBLY CAN BE ROTATED AS REQUIRED

TOP VIEW

KM26 QuikShip Drawing #1

2-5/8"

3
10" 2" 150# RF SLIP ON FLANGE 1/2" NPT DRAIN PLUG SIDE VIEW 2" 150# RF BLIND FLANGE

2" 150# RF WN FLANGE

ACCESSORIES: TRANSMITTER: _____ AT200 or _____AT600 (16 foot maximum ML on AT600) Check transmitter options (available for AT200 or AT600): _____ BOTTOM or _____ TOP CONNECTED ELECTRONIC HOUSING _____ FACTORY MUTUAL/CSA or ______ CENELEC APPROVAL Check additional transmitter options for AT200 only: _____ LCD INDICATOR _____ HART or _____ HONEYWELL DE or _____ FOUNDATION FIELDBUS

FRONT VIEW

SWITCH (SPECIFY QTY) _____ MS-30 (1 AMP, SPDT, NEMA 4X HOUSING) _____ MS-30/EX (1 AMP, SPDT, EXPLOSION PROOF HOUSING) _____ MS-40 (10 AMP, DPDT, NEMA 4X HOUSING) _____ MS-40/EX (10 AMP, DPDT, EXPLOSION PROOF HOUSING) _____ MS-41/S/F7/X (10 AMP, DPDT, NEMA 4X HOUSING) _____ PS-35 (PNEUMATIC; 15-100 PSIG SUPPLY, NEMA 4X HOUSING) _____ PS-45 (PNEUMATIC; 1-100 PSIG SUPPLY, NEMA 4X HOUSING)

PROCESS CONDITIONS: - LEVEL GAUGE PRESSURE RATINGS: 275 PSIG @ 100F, 235 PSIG @ 200F, 215 PSIG @ 300F (NOT RATED FOR CRYOGENIC TEMPERATURES) - MIN. SPECIFIC GRAVITY: 0.70 MATERIAL SPECIFICATIONS: - CHAMBER & FLANGES: 2" SCH 10 SA-312 TP 304 SS CHAMBER, SA-182 F304 SS RF FLANGES - FLOAT MATERIAL TYPE: 316 SS - STUDS: A193-B7, NUTS: A194 2H; BOTH CADMIUM PLATED, YELLOW DICHROMATE DIPPED - GASKET: 1/16" THICK, FLEXIBLE GRAPHITE WITH 316/316L SS INSERT - SCALE ASSEMBLY: 316 SS CHANNEL, RULER & CLAMPS

DIMENSIONAL DRAWING FOR KM26S MLG QUIKSHIP FIGURE 1

KM26QS1

DWG NO. KM26QS2

SPECIFY EACH OF THE FOLLOWING: _______________ = MEASURING LENGTH (ML); (18'-0" Max.) _______________ = OPERATING SPECIFIC GRAVITY (0.70 Min.) _______________ = OPERATING TEMPERATURE (F) _______________ = OPERATING PRESSURE (PSIG) 1/2" NPT VENT PLUG _______________________ = FLUID TYPE 2" 150# RF WN FLANGE 6-1/2" INDICATOR TYPE (WITH GLASS TUBE): _____ FLUORESCENT ORANGE SHUTTLE (STD.) _____ YELLOW / BLACK MAGNETIC BAR GRAPH _____ RED / WHITE MAGNETIC BAR GRAPH SCALE / RULER INDICATION: _____ FEET / INCHES WITH 1/2" DIVISIONS (STD.) _____ METERS / CENTIMETERS WITH 1 CM DIVISIONS ML _______________________ = TAG NO. MAX TEMP/PRESS. LIMITS: 275 PSIG @ 100F 235 PSIG @ 200F 215 PSIG @ 300F

3-13/16" 3-5/8"

SCALE ASSEMBLY CAN BE ROTATED AS REQUIRED

TOP VIEW

KM26 QuikShip Drawing #2

2-5/8"

4
10" 2" 150# RF SLIP ON FLANGE 1/2" NPT DRAIN PLUG SIDE VIEW 2" 150# RF BLIND FLANGE

2" 150# RF WN FLANGE

ACCESSORIES: TRANSMITTER: _____ AT200 or _____AT600 (16 foot maximum ML on AT600) Check transmitter options (available for AT200 or AT600): _____ BOTTOM or _____ TOP CONNECTED ELECTRONIC HOUSING _____ FACTORY MUTUAL/CSA or ______ CENELEC APPROVAL Check additional transmitter options for AT200 only: _____ LCD INDICATOR _____ HART or _____ HONEYWELL DE or _____ FOUNDATION FIELDBUS

FRONT VIEW

SWITCH (SPECIFY QTY) _____ MS-30 (1 AMP, SPDT, NEMA 4X HOUSING) _____ MS-30/EX (1 AMP, SPDT, EXPLOSION PROOF HOUSING) _____ MS-40 (10 AMP, DPDT, NEMA 4X HOUSING) _____ MS-40/EX (10 AMP, DPDT, EXPLOSION PROOF HOUSING) _____ MS-41/S/F7/X (10 AMP, DPDT, NEMA 4X HOUSING) _____ PS-35 (PNEUMATIC; 15-100 PSIG SUPPLY, NEMA 4X HOUSING) _____ PS-45 (PNEUMATIC; 1-100 PSIG SUPPLY, NEMA 4X HOUSING)
K-TEK LLC 18321 SWAMP ROAD PRAIRIEVILLE, LA 70769 USA

DIMENSIONAL DRAWING FOR KM26S MLG QUIKSHIP FIGURE 2

CUSTOMER: K-TEK JOB NO.: DRAWING NO.: KM26QS2

PROCESS CONDITIONS: - LEVEL GAUGE PRESSURE RATINGS: 275 PSIG @ 100F, 235 PSIG @ 200F, 215 PSIG @ 300F (NOT RATED FOR CRYOGENIC TEMPERATURES) - MIN. SPECIFIC GRAVITY: 0.70 MATERIAL SPECIFICATIONS: - CHAMBER & FLANGES: 2" SCH 10 SA-312 TP 316 SS CHAMBER, SA-182 F316 SS RF FLANGES - FLOAT MATERIAL TYPE: 316 SS - STUDS: A193-B7, NUTS: A194 2H; BOTH CADMIUM PLATED, YELLOW DICHROMATE DIPPED - GASKET: 1/16" THICK, FLEXIBLE GRAPHITE WITH 316/316L SS INSERT - SCALE ASSEMBLY: 316 SS CHANNEL, RULER & CLAMPS

DWG NO. KM26QS3

SPECIFY EACH OF THE FOLLOWING: _______________ = MEASURING LENGTH (ML); (18'-0" Max.) _______________ = OPERATING SPECIFIC GRAVITY (0.50 Min.) _______________ = OPERATING TEMPERATURE (F) _______________ = OPERATING PRESSURE (PSIG) 1/2" NPT VENT PLUG _______________________ = FLUID TYPE 2" 150# RF WN FLANGE 6-1/2" INDICATOR TYPE (WITH GLASS TUBE): _____ FLUORESCENT ORANGE SHUTTLE (STD.) _____ YELLOW / BLACK MAGNETIC BAR GRAPH _____ RED / WHITE MAGNETIC BAR GRAPH SCALE / RULER INDICATION: _____ FEET / INCHES WITH 1/2" DIVISIONS (STD.) _____ METERS / CENTIMETERS WITH 1 CM DIVISIONS ML _______________________ = TAG NO.

4-1/16" 4-1/4"

SCALE ASSEMBLY CAN BE ROTATED AS REQUIRED

TOP VIEW

MAX TEMP/PRESS. LIMITS: 275 PSIG @ 100F 235 PSIG @ 200F 215 PSIG @ 300F

KM26 QuikShip Drawing #3

2-5/8"

5
10" 2-1/2" 150# RF SLIP ON FLANGE 1/2" NPT DRAIN PLUG SIDE VIEW 2-1/2" 150# RF BLIND FLANGE

2" 150# RF WN FLANGE

ACCESSORIES: TRANSMITTER: _____ AT200 or _____AT600 (16 foot maximum ML on AT600) Check transmitter options (available for AT200 or AT600): _____ BOTTOM or _____ TOP CONNECTED ELECTRONIC HOUSING _____ FACTORY MUTUAL/CSA or ______ CENELEC APPROVAL Check additional transmitter options for AT200 only: _____ LCD INDICATOR _____ HART or _____ HONEYWELL DE or _____ FOUNDATION FIELDBUS SWITCH (SPECIFY QTY) _____ MS-30 (1 AMP, SPDT, NEMA 4X HOUSING) _____ MS-30/EX (1 AMP, SPDT, EXPLOSION PROOF HOUSING) _____ MS-40 (10 AMP, DPDT, NEMA 4X HOUSING) _____ MS-40/EX (10 AMP, DPDT, EXPLOSION PROOF HOUSING) _____ MS-41/S/F7/X (10 AMP, DPDT, NEMA 4X HOUSING) _____ PS-35 (PNEUMATIC; 15-100 PSIG SUPPLY, NEMA 4X HOUSING) _____ PS-45 (PNEUMATIC; 1-100 PSIG SUPPLY, NEMA 4X HOUSING)

FRONT VIEW

PROCESS CONDITIONS: - LEVEL GAUGE PRESSURE RATINGS: 275 PSIG @ 100F, 235 PSIG @ 200F, 215 PSIG @ 300F (NOT RATED FOR CRYOGENIC TEMPERATURES) - MIN. SPECIFIC GRAVITY: 0.50 MATERIAL SPECIFICATIONS: - CHAMBER & FLANGES: 2-1/2" SCH 10 SA-312 TP 304 SS CHAMBER, SA-182 F304 SS RF FLANGES - FLOAT MATERIAL TYPE: GRADE 2 TITANIUM - STUDS: A193-B7, NUTS: A194 2H; BOTH CADMIUM PLATED, YELLOW DICHROMATE DIPPED - GASKET: 1/16" THICK, FLEXIBLE GRAPHITE WITH 316/316L SS INSERT - SCALE ASSEMBLY: 316 SS CHANNEL, RULER & CLAMPS

DIMENSIONAL DRAWING FOR KM26S MLG QUIKSHIP FIGURE 3

KM26QS3

DWG NO. KM26QS4

SPECIFY EACH OF THE FOLLOWING: _______________ = MEASURING LENGTH ( ML); (18'-0" Max.) _______________ = OPERATING SPECIFIC GRAVITY (0.50 Min.) _______________ = OPERATING TEMPERATURE (F) _______________ = OPERATING PRESSURE (PSIG) 1/2" NPT VENT PLUG _______________________ = FLUID TYPE 2" 150# RF WN FLANGE 6-1/2" INDICATOR TYPE (WITH GLASS TUBE): _____ FLUORESCENT ORANGE SHUTTLE (STD.) _____ YELLOW / BLACK MAGNETIC BAR GRAPH _____ RED / WHITE MAGNETIC BAR GRAPH SCALE / RULER INDICATION: _____ FEET / INCHES WITH 1/2" DIVISIONS (STD.) _____ METERS / CENTIMETERS WITH 1 CM DIVISIONS ML _______________________ = TAG NO. MAX TEMP/PRESS. LIMITS: 275 PSIG @ 100F 235 PSIG @ 200F 215 PSIG @ 300F

4-1/16" 4-1/4"

SCALE ASSEMBLY CAN BE ROTATED AS REQUIRED

TOP VIEW

KM26 QuikShip Drawing #4

2-5/8"

6
10" 2-1/2" 150# RF SLIP ON FLANGE 1/2" NPT DRAIN PLUG SIDE VIEW 2-1/2" 150# RF BLIND FLANGE

2" 150# RF WN FLANGE

ACCESSORIES: TRANSMITTER: _____ AT200 or _____AT600 (16 foot maximum ML on AT600) Check transmitter options (available for AT200 or AT600): _____ BOTTOM or _____ TOP CONNECTED ELECTRONIC HOUSING _____ FACTORY MUTUAL/CSA or ______ CENELEC APPROVAL Check additional transmitter options for AT200 only: _____ LCD INDICATOR _____ HART or _____ HONEYWELL DE or _____ FOUNDATION FIELDBUS SWITCH (SPECIFY QTY) _____ MS-30 (1 AMP, SPDT, NEMA 4X HOUSING) _____ MS-30/EX (1 AMP, SPDT, EXPLOSION PROOF HOUSING) _____ MS-40 (10 AMP, DPDT, NEMA 4X HOUSING) _____ MS-40/EX (10 AMP, DPDT, EXPLOSION PROOF HOUSING) _____ MS-41/S/F7/X (10 AMP, DPDT, NEMA 4X HOUSING) _____ PS-35 (PNEUMATIC; 15-100 PSIG SUPPLY, NEMA 4X HOUSING) _____ PS-45 (PNEUMATIC; 1-100 PSIG SUPPLY, NEMA 4X HOUSING)

FRONT VIEW

PROCESS CONDITIONS : - LEVEL GAUGE PRESSURE RATINGS: 275 PSIG @ 100F, 235 PSIG @ 200F, 215 PSIG @ 300F (NOT RATED FOR CRYOGENIC TEMPERATURES) - MIN. SPECIFIC GRAVITY: 0.50 MATERIAL SPECIFICATIONS : - CHAMBER & FLANGES: 2-1/2" SCH 10 SA-312 TP 316 SS CHAMBER, SA-182 F316 SS RF FLANGES - FLOAT MATERIAL TYPE: GRADE 2 TITANIUM - STUDS: A193-B7, NUTS: A194 2H; BOTH CADMIUM PLATED, YELLOW DICHROMATE DIPPED - GASKET: 1/16" THICK, FLEXIBLE GRAPHITE WITH 316/316L SS INSERT - SCALE ASSEMBLY: 316 SS CHANNEL, RULER & CLAMPS

DIMENSIONAL DRAWING FOR KM26S MLG QUIKSHIP FIGURE 4

KM26QS4

DWG NO. KM26QS5

SPECIFY EACH OF THE FOLLOWING : _______________ = MEASURING LENGTH ( ML); (18'-0" Max.) _______________ = OPERATING SPECIFIC GRAVITY (0.80 Min.) _______________ = OPERATING TEMPERATURE (F) _______________ = OPERATING PRESSURE (PSIG) 1/2" NPT VENT PLUG _______________________ = FLUID TYPE 2" 300# RF WN FLANGE 6-1/2" INDICATOR TYPE (WITH GLASS TUBE) : _____ FLUORESCENT ORANGE SHUTTLE (STD.) _____ YELLOW / BLACK MAGNETIC BAR GRAPH _____ RED / WHITE MAGNETIC BAR GRAPH SCALE / RULER INDICATION : _____ FEET / INCHES WITH 1/2" DIVISIONS (STD.) _____ METERS / CENTIMETERS WITH 1 CM DIVISIONS ML _______________________ = TAG NO. MAX TEMP/PRESS. LIMITS: 720 PSIG @ 100F 620 PSIG @ 200F 560 PSIG @ 300F

4-1/16" 3-15/16"

SCALE ASSEMBLY CAN BE ROTATED AS REQUIRED

TOP VIEW

KM26 QuikShip Drawing #5

2-7/8"

7
10" 2" 300# RF SLIP ON FLANGE 1/2" NPT DRAIN PLUG SIDE VIEW 2" 300# RF BLIND FLANGE

2" 300# RF WN FLANGE

ACCESSORIES: TRANSMITTER : _____ AT200 or _____AT600 (16 foot maximum ML on AT600) Check transmitter options (available for AT200 or AT600): _____ BOTTOM or _____ TOP CONNECTED ELECTRONIC HOUSING _____ FACTORY MUTUAL/CSA or ______ CENELEC APPROVAL Check additional transmitter options for AT200 only: _____ LCD INDICATOR _____ HART or _____ HONEYWELL DE or _____ FOUNDATION FIELDBUS

FRONT VIEW

SWITCH (SPECIFY QTY) _____ MS-30 (1 AMP, SPDT, NEMA 4X HOUSING) _____ MS-30/EX (1 AMP, SPDT, EXPLOSION PROOF HOUSING) _____ MS-40 (10 AMP, DPDT, NEMA 4X HOUSING) _____ MS-40/EX (10 AMP, DPDT, EXPLOSION PROOF HOUSING) _____ MS-41/S/F7/X (10 AMP, DPDT, NEMA 4X HOUSING) _____ PS-35 (PNEUMATIC; 15-100 PSIG SUPPLY, NEMA 4X HOUSING) _____ PS-45 (PNEUMATIC; 1-100 PSIG SUPPLY, NEMA 4X HOUSING)

PROCESS CONDITIONS : - LEVEL GAUGE PRESSURE RATINGS: 720 PSIG @ 100F, 620 PSIG @ 200F, 560 PSIG @ 300F (NOT RATED FOR CRYOGENIC TEMPERATURES) - MIN. SPECIFIC GRAVITY: 0.80 MATERIAL SPECIFICATIONS : - CHAMBER & FLANGES: 2" SCH 10 SA-312 TP 304 SS CHAMBER, SA-182 F304 SS RF FLANGES - FLOAT MATERIAL TYPE: 316 SS - STUDS: A193-B7, NUTS: A194 2H; BOTH CADMIUM PLATED, YELLOW DICHROMATE DIPPED - GASKET: 1/16" THICK, FLEXIBLE GRAPHITE WITH 316/316L SS INSERT - SCALE ASSEMBLY: 316 SS CHANNEL, RULER & CLAMPS

DIMENSIONAL DRAWING FOR KM26S MLG QUIKSHIP FIGURE 5

KM26QS5

DWG NO. KM26QS6

SPECIFY EACH OF THE FOLLOWING: _______________ = MEASURING LENGTH (ML); (18'-0" Max.) _______________ = OPERATING SPECIFIC GRAVITY (0.80 Min.) _______________ = OPERATING TEMPERATURE (F) _______________ = OPERATING PRESSURE (PSIG) 1/2" NPT VENT PLUG _______________________ = FLUID TYPE 2" 300# RF WN FLANGE 6-1/2" INDICATOR TYPE (WITH GLASS TUBE): _____ FLUORESCENT ORANGE SHUTTLE (STD.) _____ YELLOW / BLACK MAGNETIC BAR GRAPH _____ RED / WHITE MAGNETIC BAR GRAPH SCALE / RULER INDICATION: _____ FEET / INCHES WITH 1/2" DIVISIONS (STD.) _____ METERS / CENTIMETERS WITH 1 CM DIVISIONS ML _______________________ = TAG NO. MAX TEMP/PRESS. LIMITS: 720 PSIG @ 100F 620 PSIG @ 200F 560 PSIG @ 300F

4-1/16" 3-15/16"

SCALE ASSEMBLY CAN BE ROTATED AS REQUIRED

TOP VIEW

KM26 QuikShip Drawing #6

2-7/8"

8
10" 2" 300# RF SLIP ON FLANGE 1/2" NPT DRAIN PLUG SIDE VIEW 2" 300# RF BLIND FLANGE

2" 300# RF WN FLANGE

ACCESSORIES: TRANSMITTER: _____ AT200 or _____AT600 (16 foot maximum ML on AT600) Check transmitter options (available for AT200 or AT600): _____ BOTTOM or _____ TOP CONNECTED ELECTRONIC HOUSING _____ FACTORY MUTUAL/CSA or ______ CENELEC APPROVAL Check additional transmitter options for AT200 only: _____ LCD INDICATOR _____ HART or _____ HONEYWELL DE or _____ FOUNDATION FIELDBUS

FRONT VIEW

SWITCH (SPECIFY QTY) _____ MS-30 (1 AMP, SPDT, NEMA 4X HOUSING) _____ MS-30/EX (1 AMP, SPDT, EXPLOSION PROOF HOUSING) _____ MS-40 (10 AMP, DPDT, NEMA 4X HOUSING) _____ MS-40/EX (10 AMP, DPDT, EXPLOSION PROOF HOUSING) _____ MS-41/S/F7/X (10 AMP, DPDT, NEMA 4X HOUSING) _____ PS-35 (PNEUMATIC; 15-100 PSIG SUPPLY, NEMA 4X HOUSING) _____ PS-45 (PNEUMATIC; 1-100 PSIG SUPPLY, NEMA 4X HOUSING)

PROCESS CONDITIONS: - LEVEL GAUGE PRESSURE RATINGS: 720 PSIG @ 100F, 620 PSIG @ 200F, 560 PSIG @ 300F (NOT RATED FOR CRYOGENIC TEMPERATURES) - MIN. SPECIFIC GRAVITY: 0.80 MATERIAL SPECIFICATIONS: - CHAMBER & FLANGES: 2" SCH 10 SA-312 TP 316 SS CHAMBER, SA-182 F316 SS RF FLANGES - FLOAT MATERIAL TYPE: 316 SS - STUDS: A193-B7, NUTS: A194 2H; BOTH CADMIUM PLATED, YELLOW DICHROMATE DIPPED - GASKET: 1/16" THICK, FLEXIBLE GRAPHITE WITH 316/316L SS INSERT - SCALE ASSEMBLY: 316 SS CHANNEL, RULER & CLAMPS

DIMENSIONAL DRAWING FOR KM26S MLG QUIKSHIP FIGURE 6

KM26QS6

DWG NO. KM26QS7

SPECIFY EACH OF THE FOLLOWING: _______________ = MEASURING LENGTH (ML); (18'-0" Max.) _______________ = OPERATING SPECIFIC GRAVITY (0.52 Min.) _______________ = OPERATING TEMPERATURE (F) _______________ = OPERATING PRESSURE (PSIG) 1/2" NPT VENT PLUG _______________________ = FLUID TYPE 2" 300# RF WN FLANGE 6-1/2" INDICATOR TYPE (WITH GLASS TUBE): _____ FLUORESCENT ORANGE SHUTTLE (STD.) _____ YELLOW / BLACK MAGNETIC BAR GRAPH _____ RED / WHITE MAGNETIC BAR GRAPH SCALE / RULER INDICATION: _____ FEET / INCHES WITH 1/2" DIVISIONS (STD.) _____ METERS / CENTIMETERS WITH 1 CM DIVISIONS ML _______________________ = TAG NO.

4-5/16" 4-1/2"

SCALE ASSEMBLY CAN BE ROTATED AS REQUIRED

TOP VIEW

MAX TEMP/PRESS. LIMITS: 720 PSIG @ 100F 620 PSIG @ 200F 560 PSIG @ 300F

KM26 QuikShip Drawing #7

2-7/8"

9
11" 2-1/2" 300# RF SLIP ON FLANGE 1/2" NPT DRAIN PLUG SIDE VIEW 2-1/2" 300# RF BLIND FLANGE

2" 300# RF WN FLANGE

ACCESSORIES: TRANSMITTER: _____ AT200 or _____AT600 (16 foot maximum ML on AT600) Check transmitter options (available for AT200 or AT600): _____ BOTTOM or _____ TOP CONNECTED ELECTRONIC HOUSING _____ FACTORY MUTUAL/CSA or ______ CENELEC APPROVAL Check additional transmitter options for AT200 only: _____ LCD INDICATOR _____ HART or _____ HONEYWELL DE or _____ FOUNDATION FIELDBUS SWITCH (SPECIFY QTY) _____ MS-30 (1 AMP, SPDT, NEMA 4X HOUSING) _____ MS-30/EX (1 AMP, SPDT, EXPLOSION PROOF HOUSING) _____ MS-40 (10 AMP, DPDT, NEMA 4X HOUSING) _____ MS-40/EX (10 AMP, DPDT, EXPLOSION PROOF HOUSING) _____ MS-41/S/F7/X (10 AMP, DPDT, NEMA 4X HOUSING) _____ PS-35 (PNEUMATIC; 15-100 PSIG SUPPLY, NEMA 4X HOUSING) _____ PS-45 (PNEUMATIC; 1-100 PSIG SUPPLY, NEMA 4X HOUSING)

FRONT VIEW

DIMENSIONAL DRAWING FOR KM26S MLG QUIKSHIP FIGURE 7

PROCESS CONDITIONS: - LEVEL GAUGE PRESSURE RATINGS: 720 PSIG @ 100F, 620 PSIG @ 200F, 560 PSIG @ 300F (NOT RATED FOR CRYOGENIC TEMPERATURES) - MIN. SPECIFIC GRAVITY: 0.52 MATERIAL SPECIFICATIONS: - CHAMBER & FLANGES: 2-1/2" SCH 10 SA-312 TP 304 SS CHAMBER, SA-182 F304 SS RF FLANGES - FLOAT MATERIAL TYPE: GRADE 2 TITANIUM - STUDS: A193-B7, NUTS: A194 2H; BOTH CADMIUM PLATED, YELLOW DICHROMATE DIPPED - GASKET: 1/16" THICK, FLEXIBLE GRAPHITE WITH 316/316L SS INSERT - SCALE ASSEMBLY: 316 SS CHANNEL, RULER & CLAMPS

KM26QS7

DWG NO. KM26QS8

SPECIFY EACH OF THE FOLLOWING: _______________ = MEASURING LENGTH ( ML); (18'-0" Max.) _______________ = OPERATING SPECIFIC GRAVITY (0.52 Min.) _______________ = OPERATING TEMPERATURE (F) _______________ = OPERATING PRESSURE (PSIG) 1/2" NPT VENT PLUG _______________________ = FLUID TYPE 2" 300# RF WN FLANGE 6-1/2" INDICATOR TYPE (WITH GLASS TUBE): _____ FLUORESCENT ORANGE SHUTTLE (STD.) _____ YELLOW / BLACK MAGNETIC BAR GRAPH _____ RED / WHITE MAGNETIC BAR GRAPH SCALE / RULER INDICATION: _____ FEET / INCHES WITH 1/2" DIVISIONS (STD.) _____ METERS / CENTIMETERS WITH 1 CM DIVISIONS ML _______________________ = TAG NO. MAX TEMP/PRESS. LIMITS: 720 PSIG @ 100F 620 PSIG @ 200F 560 PSIG @ 300F

4-5/16" 4-1/2"

SCALE ASSEMBLY CAN BE ROTATED AS REQUIRED

TOP VIEW

KM26 QuikShip Drawing #8

2-7/8"

10
11" 2-1/2" 300# RF SLIP ON FLANGE 1/2" NPT DRAIN PLUG SIDE VIEW 2-1/2" 300# RF BLIND FLANGE

2" 300# RF WN FLANGE

ACCESSORIES: TRANSMITTER: _____ AT200 or _____AT600 (16 foot maximum ML on AT600) Check transmitter options (available for AT200 or AT600): _____ BOTTOM or _____ TOP CONNECTED ELECTRONIC HOUSING _____ FACTORY MUTUAL/CSA or ______ CENELEC APPROVAL Check additional transmitter options for AT200 only: _____ LCD INDICATOR _____ HART or _____ HONEYWELL DE or _____ FOUNDATION FIELDBUS SWITCH (SPECIFY QTY) _____ MS-30 (1 AMP, SPDT, NEMA 4X HOUSING) _____ MS-30/EX (1 AMP, SPDT, EXPLOSION PROOF HOUSING) _____ MS-40 (10 AMP, DPDT, NEMA 4X HOUSING) _____ MS-40/EX (10 AMP, DPDT, EXPLOSION PROOF HOUSING) _____ MS-41/S/F7/X (10 AMP, DPDT, NEMA 4X HOUSING) _____ PS-35 (PNEUMATIC; 15-100 PSIG SUPPLY, NEMA 4X HOUSING) _____ PS-45 (PNEUMATIC; 1-100 PSIG SUPPLY, NEMA 4X HOUSING)
K-TEK LLC 18321 SWAMP ROAD PRAIRIEVILLE, LA 70769 USA

FRONT VIEW

DIMENSIONAL DRAWING FOR KM26S MLG QUIKSHIP FIGURE 8

CUSTOMER: K-TEK JOB NO.: DRAWING NO.: KM26QS8

PROCESS CONDITIONS: - LEVEL GAUGE PRESSURE RATINGS: 720 PSIG @ 100F, 620 PSIG @ 200F, 560 PSIG @ 300F (NOT RATED FOR CRYOGENIC TEMPERATURES) - MIN. SPECIFIC GRAVITY: 0.52 MATERIAL SPECIFICATIONS: - CHAMBER & FLANGES: 2-1/2" SCH 10 SA-312 TP 316 SS CHAMBER, SA-182 F316 SS RF FLANGES - FLOAT MATERIAL TYPE: GRADE 2 TITANIUM - STUDS: A193-B7, NUTS: A194 2H; BOTH CADMIUM PLATED, YELLOW DICHROMATE DIPPED - GASKET: 1/16" THICK, FLEXIBLE GRAPHITE WITH 316/316L SS INSERT - SCALE ASSEMBLY: 316 SS CHANNEL, RULER & CLAMPS

DWG NO. KM26QS9

SPECIFY EACH OF THE FOLLOWING: _______________ = MEASURING LENGTH (ML); (18'-0" Max.) _______________ = OPERATING SPECIFIC GRAVITY (0.70 Min.) _______________ = OPERATING TEMPERATURE (F) _______________ = OPERATING PRESSURE (PSIG) 1/2" NPT VENT PLUG _______________________ = FLUID TYPE 1" SCH 40 MNPT NIPPLE 6-1/2" INDICATOR TYPE (WITH GLASS TUBE): _____ FLUORESCENT ORANGE SHUTTLE (STD.) _____ YELLOW / BLACK MAGNETIC BAR GRAPH _____ RED / WHITE MAGNETIC BAR GRAPH SCALE / RULER INDICATION: _____ FEET / INCHES WITH 1/2" DIVISIONS (STD.) _____ METERS / CENTIMETERS WITH 1 CM DIVISIONS ML _______________________ = TAG NO.

4-3/16" 3-5/8"

SCALE ASSEMBLY CAN BE ROTATED AS REQUIRED

TOP VIEW

MAX TEMP/PRESS. LIMITS: 275 PSIG @ 100F 235 PSIG @ 200F 215 PSIG @ 300F

KM26 QuikShip Drawing #9

3"

11
10" 2" 150# RF SLIP ON FLANGE 1/2" NPT DRAIN PLUG SIDE VIEW 2" 150# RF BLIND FLANGE

1" SCH 40 MNPT NIPPLE

ACCESSORIES: TRANSMITTER: _____ AT200 or _____AT600 (16 foot maximum ML on AT600) Check transmitter options (available for AT200 or AT600): _____ BOTTOM or _____ TOP CONNECTED ELECTRONIC HOUSING _____ FACTORY MUTUAL/CSA or ______ CENELEC APPROVAL Check additional transmitter options for AT200 only: _____ LCD INDICATOR _____ HART or _____ HONEYWELL DE or _____ FOUNDATION FIELDBUS

FRONT VIEW

SWITCH (SPECIFY QTY) _____ MS-30 (1 AMP, SPDT, NEMA 4X HOUSING) _____ MS-30/EX (1 AMP, SPDT, EXPLOSION PROOF HOUSING) _____ MS-40 (10 AMP, DPDT, NEMA 4X HOUSING) _____ MS-40/EX (10 AMP, DPDT, EXPLOSION PROOF HOUSING) _____ MS-41/S/F7/X (10 AMP, DPDT, NEMA 4X HOUSING) _____ PS-35 (PNEUMATIC; 15-100 PSIG SUPPLY, NEMA 4X HOUSING) _____ PS-45 (PNEUMATIC; 1-100 PSIG SUPPLY, NEMA 4X HOUSING)

PROCESS CONDITIONS: - LEVEL GAUGE PRESSURE RATINGS: 275 PSIG @ 100F, 235 PSIG @ 200F, 215 PSIG @ 300F (NOT RATED FOR CRYOGENIC TEMPERATURES) - MIN. SPECIFIC GRAVITY: 0.70 MATERIAL SPECIFICATIONS: - CHAMBER, NIPPLES & FLANGES: 2" SCH 10 SA-312 TP 304 SS CHAMBER & SCH 40 NIPPLES, SA-182 F304 SS RF FLANGES - FLOAT MATERIAL TYPE: 316 SS - STUDS: A193-B7, NUTS: A194 2H; BOTH CADMIUM PLATED, YELLOW DICHROMATE DIPPED - GASKET: 1/16" THICK, FLEXIBLE GRAPHITE WITH 316/316L SS INSERT - SCALE ASSEMBLY: 316 SS CHANNEL, RULER & CLAMPS

DIMENSIONAL DRAWING FOR KM26S MLG QUIKSHIP FIGURE 9

KM26QS9

DWG NO. KM26QS10

SPECIFY EACH OF THE FOLLOWING: _______________ = MEASURING LENGTH (ML); (18'-0" Max.) _______________ = OPERATING SPECIFIC GRAVITY (0.70 Min.) _______________ = OPERATING TEMPERATURE (F) _______________ = OPERATING PRESSURE (PSIG) 1/2" NPT VENT PLUG _______________________ = FLUID TYPE 1" SCH 40 MNPT NIPPLE 6-1/2" INDICATOR TYPE (WITH GLASS TUBE): _____ FLUORESCENT ORANGE SHUTTLE (STD.) _____ YELLOW / BLACK MAGNETIC BAR GRAPH _____ RED / WHITE MAGNETIC BAR GRAPH SCALE / RULER INDICATION: _____ FEET / INCHES WITH 1/2" DIVISIONS (STD.) _____ METERS / CENTIMETERS WITH 1 CM DIVISIONS ML _______________________ = TAG NO. MAX TEMP/PRESS. LIMITS: 275 PSIG @ 100F 235 PSIG @ 200F 215 PSIG @ 300F

4-3/16" 3-5/8"

SCALE ASSEMBLY CAN BE ROTATED AS REQUIRED

TOP VIEW

KM26 QuikShip Drawing #10

3"

12
10" 2" 150# RF SLIP ON FLANGE 1/2" NPT DRAIN PLUG SIDE VIEW 2" 150# RF BLIND FLANGE

1" SCH 40 MNPT NIPPLE

ACCESSORIES: TRANSMITTER: _____ AT200 or _____AT600 (16 foot maximum ML on AT600) Check transmitter options (available for AT200 or AT600): _____ BOTTOM or _____ TOP CONNECTED ELECTRONIC HOUSING _____ FACTORY MUTUAL/CSA or ______ CENELEC APPROVAL Check additional transmitter options for AT200 only: _____ LCD INDICATOR _____ HART or _____ HONEYWELL DE or _____ FOUNDATION FIELDBUS

FRONT VIEW

SWITCH (SPECIFY QTY) _____ MS-30 (1 AMP, SPDT, NEMA 4X HOUSING) _____ MS-30/EX (1 AMP, SPDT, EXPLOSION PROOF HOUSING) _____ MS-40 (10 AMP, DPDT, NEMA 4X HOUSING) _____ MS-40/EX (10 AMP, DPDT, EXPLOSION PROOF HOUSING) _____ MS-41/S/F7/X (10 AMP, DPDT, NEMA 4X HOUSING) _____ PS-35 (PNEUMATIC; 15-100 PSIG SUPPLY, NEMA 4X HOUSING) _____ PS-45 (PNEUMATIC; 1-100 PSIG SUPPLY, NEMA 4X HOUSING)

PROCESS CONDITIONS: - LEVEL GAUGE PRESSURE RATINGS: 275 PSIG @ 100F, 235 PSIG @ 200F, 215 PSIG @ 300F (NOT RATED FOR CRYOGENIC TEMPERATURES) - MIN. SPECIFIC GRAVITY: 0.70 MATERIAL SPECIFICATIONS: - CHAMBER, NIPPLES & FLANGES: 2" SCH 10 SA-312 TP 316 SS CHAMBER & SCH 40 NIPPLES, SA-182 F316 SS RF FLANGES - FLOAT MATERIAL TYPE: 316 SS - STUDS: A193-B7, NUTS: A194 2H; BOTH CADMIUM PLATED, YELLOW DICHROMATE DIPPED - GASKET: 1/16" THICK, FLEXIBLE GRAPHITE WITH 316/316L SS INSERT - SCALE ASSEMBLY: 316 SS CHANNEL, RULER & CLAMPS

DIMENSIONAL DRAWING FOR KM26S MLG QUIKSHIP FIGURE 10

KM26QS10

DWG NO. KM26QS11

SPECIFY EACH OF THE FOLLOWING: _______________ = MEASURING LENGTH (ML); (18'-0" Max.) _______________ = OPERATING SPECIFIC GRAVITY (0.50 Min.) _______________ = OPERATING TEMPERATURE (F) _______________ = OPERATING PRESSURE (PSIG) 1/2" NPT VENT PLUG _______________________ = FLUID TYPE 1" SCH 40 MNPT NIPPLE 6-1/2" INDICATOR TYPE (WITH GLASS TUBE): _____ FLUORESCENT ORANGE SHUTTLE (STD.) _____ YELLOW / BLACK MAGNETIC BAR GRAPH _____ RED / WHITE MAGNETIC BAR GRAPH SCALE / RULER INDICATION: _____ FEET / INCHES WITH 1/2" DIVISIONS (STD.) _____ METERS / CENTIMETERS WITH 1 CM DIVISIONS ML _______________________ = TAG NO.

4-7/16" 4-1/4"

SCALE ASSEMBLY CAN BE ROTATED AS REQUIRED

TOP VIEW

MAX TEMP/PRESS. LIMITS: 275 PSIG @ 100F 235 PSIG @ 200F 215 PSIG @ 300F

KM26 QuikShip Drawing #11

3"

13
10" 2-1/2" 150# RF SLIP ON FLANGE 1/2" NPT DRAIN PLUG SIDE VIEW 2-1/2" 150# RF BLIND FLANGE

1" SCH 40 MNPT NIPPLE

ACCESSORIES: TRANSMITTER: _____ AT200 or _____AT600 (16 foot maximum ML on AT600) Check transmitter options (available for AT200 or AT600): _____ BOTTOM or _____ TOP CONNECTED ELECTRONIC HOUSING _____ FACTORY MUTUAL/CSA or ______ CENELEC APPROVAL Check additional transmitter options for AT200 only: _____ LCD INDICATOR _____ HART or _____ HONEYWELL DE or _____ FOUNDATION FIELDBUS SWITCH (SPECIFY QTY) _____ MS-30 (1 AMP, SPDT, NEMA 4X HOUSING) _____ MS-30/EX (1 AMP, SPDT, EXPLOSION PROOF HOUSING) _____ MS-40 (10 AMP, DPDT, NEMA 4X HOUSING) _____ MS-40/EX (10 AMP, DPDT, EXPLOSION PROOF HOUSING) _____ MS-41/S/F7/X (10 AMP, DPDT, NEMA 4X HOUSING) _____ PS-35 (PNEUMATIC; 15-100 PSIG SUPPLY, NEMA 4X HOUSING) _____ PS-45 (PNEUMATIC; 1-100 PSIG SUPPLY, NEMA 4X HOUSING)

FRONT VIEW

PROCESS CONDITIONS: - LEVEL GAUGE PRESSURE RATINGS: 275 PSIG @ 100F, 235 PSIG @ 200F, 215 PSIG @ 300F (NOT RATED FOR CRYOGENIC TEMPERATURES) - MIN. SPECIFIC GRAVITY: 0.50 MATERIAL SPECIFICATIONS: - CHAMBER, NIPPLES & FLANGES: 2-1/2" SCH 10 SA-312 TP 304 SS CHAMBER & SCH 40 NIPPLES, SA-182 F304 SS RF FLANGES - FLOAT MATERIAL TYPE: GRADE 2 TITANIUM - STUDS: A193-B7, NUTS: A194 2H; BOTH CADMIUM PLATED, YELLOW DICHROMATE DIPPED - GASKET: 1/16" THICK, FLEXIBLE GRAPHITE WITH 316/316L SS INSERT - SCALE ASSEMBLY: 316 SS CHANNEL, RULER & CLAMPS

DIMENSIONAL DRAWING FOR KM26S MLG QUIKSHIP FIGURE 11

KM26QS11

DWG NO. KM26QS12

SPECIFY EACH OF THE FOLLOWING: _______________ = MEASURING LENGTH ( ML); (18'-0" Max.) _______________ = OPERATING SPECIFIC GRAVITY (0.50 Min.) _______________ = OPERATING TEMPERATURE (F) _______________ = OPERATING PRESSURE (PSIG) 1/2" NPT VENT PLUG _______________________ = FLUID TYPE 1" SCH 40 MNPT NIPPLE 6-1/2" INDICATOR TYPE (WITH GLASS TUBE): _____ FLUORESCENT ORANGE SHUTTLE (STD.) _____ YELLOW / BLACK MAGNETIC BAR GRAPH _____ RED / WHITE MAGNETIC BAR GRAPH SCALE / RULER INDICATION: _____ FEET / INCHES WITH 1/2" DIVISIONS (STD.) _____ METERS / CENTIMETERS WITH 1 CM DIVISIONS ML _______________________ = TAG NO. MAX TEMP/PRESS. LIMITS: 275 PSIG @ 100F 235 PSIG @ 200F 215 PSIG @ 300F

4-7/16" 4-1/4"

SCALE ASSEMBLY CAN BE ROTATED AS REQUIRED

TOP VIEW

KM26 QuikShip Drawing #12

3"

14
1" SCH 40 MNPT NIPPLE 10" 2-1/2" 150# RF SLIP ON FLANGE 1/2" NPT DRAIN PLUG SIDE VIEW 2-1/2" 150# RF BLIND FLANGE

ACCESSORIES: TRANSMITTER: _____ AT200 or _____AT600 (16 foot maximum ML on AT600) Check transmitter options (available for AT200 or AT600): _____ BOTTOM or _____ TOP CONNECTED ELECTRONIC HOUSING _____ FACTORY MUTUAL/CSA or ______ CENELEC APPROVAL Check additional transmitter options for AT200 only: _____ LCD INDICATOR _____ HART or _____ HONEYWELL DE or _____ FOUNDATION FIELDBUS SWITCH (SPECIFY QTY) _____ MS-30 (1 AMP, SPDT, NEMA 4X HOUSING) _____ MS-30/EX (1 AMP, SPDT, EXPLOSION PROOF HOUSING) _____ MS-40 (10 AMP, DPDT, NEMA 4X HOUSING) _____ MS-40/EX (10 AMP, DPDT, EXPLOSION PROOF HOUSING) _____ MS-41/S/F7/X (10 AMP, DPDT, NEMA 4X HOUSING) _____ PS-35 (PNEUMATIC; 15-100 PSIG SUPPLY, NEMA 4X HOUSING) _____ PS-45 (PNEUMATIC; 1-100 PSIG SUPPLY, NEMA 4X HOUSING)

FRONT VIEW

PROCESS CONDITIONS: - LEVEL GAUGE PRESSURE RATINGS: 275 PSIG @ 100F, 235 PSIG @ 200F, 215 PSIG @ 300F (NOT RATED FOR CRYOGENIC TEMPERATURES) - MIN. SPECIFIC GRAVITY: 0.50 MATERIAL SPECIFICATIONS: - CHAMBER, NIPPLES & FLANGES: 2-1/2" SCH 10 SA-312 TP 316 SS CHAMBER & SCH 40 NIPPLES, SA-182 F316 SS RF FLANGES - FLOAT MATERIAL TYPE: GRADE 2 TITANIUM - STUDS: A193-B7, NUTS: A194 2H; BOTH CADMIUM PLATED, YELLOW DICHROMATE DIPPED - GASKET: 1/16" THICK, FLEXIBLE GRAPHITE WITH 316/316L SS INSERT - SCALE ASSEMBLY: 316 SS CHANNEL, RULER & CLAMPS

DIMENSIONAL DRAWING FOR KM26S MLG QUIKSHIP FIGURE 12

KM26QS12

DWG NO. KM26QS13

SPECIFY EACH OF THE FOLLOWING: _______________ = MEASURING LENGTH (ML); (18'-0" Max.) _______________ = OPERATING SPECIFIC GRAVITY (0.80 Min.) _______________ = OPERATING TEMPERATURE (F) _______________ = OPERATING PRESSURE (PSIG) 1/2" NPT VENT PLUG _______________________ = FLUID TYPE 1" SCH 40 MNPT NIPPLE 6-1/2" INDICATOR TYPE (WITH GLASS TUBE): _____ FLUORESCENT ORANGE SHUTTLE (STD.) _____ YELLOW / BLACK MAGNETIC BAR GRAPH _____ RED / WHITE MAGNETIC BAR GRAPH SCALE / RULER INDICATION: _____ FEET / INCHES WITH 1/2" DIVISIONS (STD.) _____ METERS / CENTIMETERS WITH 1 CM DIVISIONS ML _______________________ = TAG NO.

4-3/16" 3-15/16"

SCALE ASSEMBLY CAN BE ROTATED AS REQUIRED

TOP VIEW

MAX TEMP/PRESS. LIMITS: 720 PSIG @ 100F 620 PSIG @ 200F 560 PSIG @ 300F

KM26 QuikShip Drawing #13

3"

15
10" 2" 300# RF SLIP ON FLANGE 1/2" NPT DRAIN PLUG SIDE VIEW 2" 300# RF BLIND FLANGE

1" SCH 40 MNPT NIPPLE

ACCESSORIES: TRANSMITTER: _____ AT200 or _____AT600 (16 foot maximum ML on AT600) Check transmitter options (available for AT200 or AT600): _____ BOTTOM or _____ TOP CONNECTED ELECTRONIC HOUSING _____ FACTORY MUTUAL/CSA or ______ CENELEC APPROVAL Check additional transmitter options for AT200 only: _____ LCD INDICATOR _____ HART or _____ HONEYWELL DE or _____ FOUNDATION FIELDBUS

FRONT VIEW

SWITCH (SPECIFY QTY) _____ MS-30 (1 AMP, SPDT, NEMA 4X HOUSING) _____ MS-30/EX (1 AMP, SPDT, EXPLOSION PROOF HOUSING) _____ MS-40 (10 AMP, DPDT, NEMA 4X HOUSING) _____ MS-40/EX (10 AMP, DPDT, EXPLOSION PROOF HOUSING) _____ MS-41/S/F7/X (10 AMP, DPDT, NEMA 4X HOUSING) _____ PS-35 (PNEUMATIC; 15-100 PSIG SUPPLY, NEMA 4X HOUSING) _____ PS-45 (PNEUMATIC; 1-100 PSIG SUPPLY, NEMA 4X HOUSING)
K-TEK LLC 18321 SWAMP ROAD PRAIRIEVILLE, LA 70769 USA

DIMENSIONAL DRAWING FOR KM26S MLG QUIKSHIP FIGURE 13

CUSTOMER: K-TEK JOB NO.: DRAWING NO.: KM26QS13

PROCESS CONDITIONS: - LEVEL GAUGE PRESSURE RATINGS: 720 PSIG @ 100F, 620 PSIG @ 200F, 560 PSIG @ 300F (NOT RATED FOR CRYOGENIC TEMPERATURES) - MIN. SPECIFIC GRAVITY: 0.80 MATERIAL SPECIFICATIONS: - CHAMBER, NIPPLES & FLANGES: 2" SCH 10 SA-312 TP 304 SS CHAMBER & SCH 40 NIPPLES, SA-182 F304 SS RF FLANGES - FLOAT MATERIAL TYPE: 316 SS - STUDS: A193-B7, NUTS: A194 2H; BOTH CADMIUM PLATED, YELLOW DICHROMATE DIPPED - GASKET: 1/16" THICK, FLEXIBLE GRAPHITE WITH 316/316L SS INSERT - SCALE ASSEMBLY: 316 SS CHANNEL, RULER & CLAMPS

DWG NO. KM26QS14

SPECIFY EACH OF THE FOLLOWING: _______________ = MEASURING LENGTH (ML); (18'-0" Max.) _______________ = OPERATING SPECIFIC GRAVITY (0.80 Min.) _______________ = OPERATING TEMPERATURE (F) _______________ = OPERATING PRESSURE (PSIG) 1/2" NPT VENT PLUG _______________________ = FLUID TYPE 1" SCH 40 MNPT NIPPLE 6-1/2" INDICATOR TYPE (WITH GLASS TUBE): _____ FLUORESCENT ORANGE SHUTTLE (STD.) _____ YELLOW / BLACK MAGNETIC BAR GRAPH _____ RED / WHITE MAGNETIC BAR GRAPH SCALE / RULER INDICATION: _____ FEET / INCHES WITH 1/2" DIVISIONS (STD.) _____ METERS / CENTIMETERS WITH 1 CM DIVISIONS ML _______________________ = TAG NO. MAX TEMP/PRESS. LIMITS: 720 PSIG @ 100F 620 PSIG @ 200F 560 PSIG @ 300F

4-3/16" 3-15/16"

SCALE ASSEMBLY CAN BE ROTATED AS REQUIRED

TOP VIEW

KM26 QuikShip Drawing #14

3"

16
10" 2" 300# RF SLIP ON FLANGE 1/2" NPT DRAIN PLUG SIDE VIEW 2" 300# RF BLIND FLANGE

1" SCH 40 MNPT NIPPLE

ACCESSORIES: TRANSMITTER: _____ AT200 or _____AT600 (16 foot maximum ML on AT600) Check transmitter options (available for AT200 or AT600): _____ BOTTOM or _____ TOP CONNECTED ELECTRONIC HOUSING _____ FACTORY MUTUAL/CSA or ______ CENELEC APPROVAL Check additional transmitter options for AT200 only: _____ LCD INDICATOR _____ HART or _____ HONEYWELL DE or _____ FOUNDATION FIELDBUS

FRONT VIEW

SWITCH (SPECIFY QTY) _____ MS-30 (1 AMP, SPDT, NEMA 4X HOUSING) _____ MS-30/EX (1 AMP, SPDT, EXPLOSION PROOF HOUSING) _____ MS-40 (10 AMP, DPDT, NEMA 4X HOUSING) _____ MS-40/EX (10 AMP, DPDT, EXPLOSION PROOF HOUSING) _____ MS-41/S/F7/X (10 AMP, DPDT, NEMA 4X HOUSING) _____ PS-35 (PNEUMATIC; 15-100 PSIG SUPPLY, NEMA 4X HOUSING) _____ PS-45 (PNEUMATIC; 1-100 PSIG SUPPLY, NEMA 4X HOUSING)
K-TEK LLC 18321 SWAMP ROAD PRAIRIEVILLE, LA 70769 USA

DIMENSIONAL DRAWING FOR KM26S MLG QUIKSHIP FIGURE 14

CUSTOMER: K-TEK JOB NO.: DRAWING NO.: KM26QS14

PROCESS CONDITIONS : - LEVEL GAUGE PRESSURE RATINGS: 720 PSIG @ 100F, 620 PSIG @ 200F, 560 PSIG @ 300F (NOT RATED FOR CRYOGENIC TEMPERATURES) - MIN. SPECIFIC GRAVITY: 0.80 MATERIAL SPECIFICATIONS : - CHAMBER, NIPPLES & FLANGES: 2" SCH 10 SA-312 TP 316 SS CHAMBER & SCH 40 NIPPLES, SA-182 F316 SS RF FLANGES - FLOAT MATERIAL TYPE: 316 SS - STUDS: A193-B7, NUTS: A194 2H; BOTH CADMIUM PLATED, YELLOW DICHROMATE DIPPED - GASKET: 1/16" THICK, FLEXIBLE GRAPHITE WITH 316/316L SS INSERT - SCALE ASSEMBLY: 316 SS CHANNEL, RULER & CLAMPS

DWG NO. KM26QS15

SPECIFY EACH OF THE FOLLOWING : _______________ = MEASURING LENGTH ( ML); (18'-0" Max.) _______________ = OPERATING SPECIFIC GRAVITY (0.52 Min.) _______________ = OPERATING TEMPERATURE (F) _______________ = OPERATING PRESSURE (PSIG) 1/2" NPT VENT PLUG _______________________ = FLUID TYPE 1" SCH 40 MNPT NIPPLE 6-1/2" INDICATOR TYPE (WITH GLASS TUBE) : _____ FLUORESCENT ORANGE SHUTTLE (STD.) _____ YELLOW / BLACK MAGNETIC BAR GRAPH _____ RED / WHITE MAGNETIC BAR GRAPH SCALE / RULER INDICATION : _____ FEET / INCHES WITH 1/2" DIVISIONS (STD.) _____ METERS / CENTIMETERS WITH 1 CM DIVISIONS ML _______________________ = TAG NO. MAX TEMP/PRESS. LIMITS: 720 PSIG @ 100F 620 PSIG @ 200F 560 PSIG @ 300F

4-7/16" 4-1/2"

SCALE ASSEMBLY CAN BE ROTATED AS REQUIRED

TOP VIEW

KM26 QuikShip Drawing #15

3"

17
11" 2-1/2" 300# RF SLIP ON FLANGE 1/2" NPT DRAIN PLUG SIDE VIEW 2-1/2" 300# RF BLIND FLANGE

1" SCH 40 MNPT NIPPLE

ACCESSORIES: TRANSMITTER: _____ AT200 or _____AT600 (16 foot maximum ML on AT600) Check transmitter options (available for AT200 or AT600): _____ BOTTOM or _____ TOP CONNECTED ELECTRONIC HOUSING _____ FACTORY MUTUAL/CSA or ______ CENELEC APPROVAL Check additional transmitter options for AT200 only: _____ LCD INDICATOR _____ HART or _____ HONEYWELL DE or _____ FOUNDATION FIELDBUS SWITCH (SPECIFY QTY) _____ MS-30 (1 AMP, SPDT, NEMA 4X HOUSING) _____ MS-30/EX (1 AMP, SPDT, EXPLOSION PROOF HOUSING) _____ MS-40 (10 AMP, DPDT, NEMA 4X HOUSING) _____ MS-40/EX (10 AMP, DPDT, EXPLOSION PROOF HOUSING) _____ MS-41/S/F7/X (10 AMP, DPDT, NEMA 4X HOUSING) _____ PS-35 (PNEUMATIC; 15-100 PSIG SUPPLY, NEMA 4X HOUSING) _____ PS-45 (PNEUMATIC; 1-100 PSIG SUPPLY, NEMA 4X HOUSING)
K-TEK LLC 18321 SWAMP ROAD PRAIRIEVILLE, LA 70769 USA

FRONT VIEW

DIMENSIONAL DRAWING FOR KM26S MLG QUIKSHIP FIGURE 15

CUSTOMER: K-TEK JOB NO.: DRAWING NO.: KM26QS15

PROCESS CONDITIONS: - LEVEL GAUGE PRESSURE RATINGS: 720 PSIG @ 100F, 620 PSIG @ 200F, 560 PSIG @ 300F (NOT RATED FOR CRYOGENIC TEMPERATURES) - MIN. SPECIFIC GRAVITY: 0.52 MATERIAL SPECIFICATIONS: - CHAMBER, NIPPLES & FLANGES: 2-1/2" SCH 10 SA-312 TP 304 SS CHAMBER & SCH 40 NIPPLES, SA-182 F304 SS RF FLANGES - FLOAT MATERIAL TYPE: GRADE 2 TITANIUM - STUDS: A193-B7, NUTS: A194 2H; BOTH CADMIUM PLATED, YELLOW DICHROMATE DIPPED - GASKET: 1/16" THICK, FLEXIBLE GRAPHITE WITH 316/316L SS INSERT - SCALE ASSEMBLY: 316 SS CHANNEL, RULER & CLAMPS

DWG NO. KM26QS16

SPECIFY EACH OF THE FOLLOWING : _______________ = MEASURING LENGTH ( ML); (18'-0" Max.) _______________ = OPERATING SPECIFIC GRAVITY (0.52 Min.) _______________ = OPERATING TEMPERATURE (F) _______________ = OPERATING PRESSURE (PSIG) 1/2" NPT VENT PLUG _______________________ = FLUID TYPE 1" SCH 40 MNPT NIPPLE 6-1/2" INDICATOR TYPE (WITH GLASS TUBE) : _____ FLUORESCENT ORANGE SHUTTLE (STD.) _____ YELLOW / BLACK MAGNETIC BAR GRAPH _____ RED / WHITE MAGNETIC BAR GRAPH SCALE / RULER INDICATION : _____ FEET / INCHES WITH 1/2" DIVISIONS (STD.) _____ METERS / CENTIMETERS WITH 1 CM DIVISIONS ML _______________________ = TAG NO. MAX TEMP/PRESS. LIMITS: 720 PSIG @ 100F 620 PSIG @ 200F 560 PSIG @ 300F

4-7/16" 4-1/2"

SCALE ASSEMBLY CAN BE ROTATED AS REQUIRED

TOP VIEW

KM26 QuikShip Drawing #16

3" 1" SCH 40 MNPT NIPPLE

18
11" 2-1/2" 300# RF SLIP ON FLANGE 1/2" NPT DRAIN PLUG SIDE VIEW 2-1/2" 300# RF BLIND FLANGE

ACCESSORIES: TRANSMITTER: _____ AT200 or _____AT600 (16 foot maximum ML on AT600) Check transmitter options (available for AT200 or AT600): _____ BOTTOM or _____ TOP CONNECTED ELECTRONIC HOUSING _____ FACTORY MUTUAL/CSA or ______ CENELEC APPROVAL Check additional transmitter options for AT200 only: _____ LCD INDICATOR _____ HART or _____ HONEYWELL DE or _____ FOUNDATION FIELDBUS SWITCH (SPECIFY QTY) _____ MS-30 (1 AMP, SPDT, NEMA 4X HOUSING) _____ MS-30/EX (1 AMP, SPDT, EXPLOSION PROOF HOUSING) _____ MS-40 (10 AMP, DPDT, NEMA 4X HOUSING) _____ MS-40/EX (10 AMP, DPDT, EXPLOSION PROOF HOUSING) _____ MS-41/S/F7/X (10 AMP, DPDT, NEMA 4X HOUSING) _____ PS-35 (PNEUMATIC; 15-100 PSIG SUPPLY, NEMA 4X HOUSING) _____ PS-45 (PNEUMATIC; 1-100 PSIG SUPPLY, NEMA 4X HOUSING)
K-TEK LLC 18321 SWAMP ROAD PRAIRIEVILLE, LA 70769 USA

FRONT VIEW

DIMENSIONAL DRAWING FOR KM26S MLG QUIKSHIP FIGURE 16

CUSTOMER: K-TEK JOB NO.: DRAWING NO.: KM26QS16

PROCESS CONDITIONS : - LEVEL GAUGE PRESSURE RATINGS: 720 PSIG @ 100F, 620 PSIG @ 200F, 560 PSIG @ 300F (NOT RATED FOR CRYOGENIC TEMPERATURES) - MIN. SPECIFIC GRAVITY: 0.52 MATERIAL SPECIFICATIONS : - CHAMBER, NIPPLES & FLANGES: 2-1/2" SCH 10 SA-312 TP 316 SS CHAMBER & SCH 40 NIPPLES, SA-182 F316 SS RF FLANGES - FLOAT MATERIAL TYPE: GRADE 2 TITANIUM - STUDS: A193-B7, NUTS: A194 2H; BOTH CADMIUM PLATED, YELLOW DICHROMATE DIPPED - GASKET: 1/16" THICK, FLEXIBLE GRAPHITE WITH 316/316L SS INSERT - SCALE ASSEMBLY: 316 SS CHANNEL, RULER & CLAMPS

MODEL NUMBER CONFIGURATION KM26 a/b/c/d/e/f/g/h/i

/a Orientation of the KM26 type in reference to mounting to the vessel
S T B Side Mounting Top Mounting Bottom Mounting 321 SS 304 / 304L SS 316 / 316L SS 317 / 317L SS 904L SS Hastelloy C-276 Hastelloy B-3 Titanium (Grade 2) Polypropylene3 KYNAR (PVDF)3 PVC3 CPVC3 Epoxy Resin Fiberglass Vinyl Ester Fiberglass Teflon S Coated 304/304L SS1, 5 Teflon S Coated 316/316L SS1, 5 Halar Coated 304 SS2, 4, 6 Halar Coated 316 SS2, 4, 6 Tefzel Coated 304 SS2, 4, 6 Tefzel Coated 316 SS2, 4, 6 Alloy 20 Incoloy 600 Incoloy 625 Incoloy 800 Incoloy 825 Aluminum Zirconium 702

/b

Chamber Material
SS1 SS4 SS6 SS7 SS9 HSC HSB TI PP PVD PVC CPV EPF VEF TN4 TN6 HL4 HL6 TF4 TF6 A20 IN600 IN625 IN800 IN825 ALU ZI2

Notes:
1 2 3 4 5 6

To minimize friction for optimal float travel - max. temp = 425F (218C). For Increased Corrosion Resistance - max. temp = 300F (149C). Maximum measuring length is 18 feet (5.48 meters). Tefzel or Halar coated units must not have any FNPT, Vent or Drain options. Maximum measuring length 14 feet (4.27 meters). Maximum measuring length 13 feet (3.96 meters).

/c
Note:

Chamber Configuration1,2 (Select code from Table 1 on pages 21 & 22) (example /W2FEFEB2)
1

If more than 2 process connections are required add the code for each in the chamber configuration code (example /W2FEFEFEB2 or /W2(3)FEB2 for 3 process connections). 2 CST: Carbon Steel and DUP: Duplex Stainless Steel are available as KM26T stilling wells and KM26 flange type materials.

/d

Connection Size / Rating1,2 - (Select code from Table 2 on page 26) (example /SR21 )

1 Note: Flange sizes are available in ASME, DIN, HG , Gost and customer specified sizes. Consult factory for special requirements. 2 CST: Carbon Steel and DUP: Duplex Stainless Steel are available as KM26T stilling wells and KM26 flange type materials.

/e

Indicator Type
S1P S1G S2G M1P M2P M1G M2G CM1A CM2A CM1B CM2B CM1C CM2C X Fluorescent Shuttle w/ Permanently Sealed Lexan Tube (200F/93C max)1 Fluorescent Shuttle w/ Hermetically Sealed Glass Tube (350F/176C max)1 High Temp (Red) Shuttle w/ Hermetically Sealed Glass Tube (1000F/538C max)1 Yellow/Black MBG w/ Permanently Sealed Lexan Tube (200F/93C max)2 Red/White MBG w/ Permanently Sealed Lexan Tube (200F/93C max)2 Yellow/Black MBG w/ Hermetically Sealed Glass Tube (650F/343C max)3 Red/White MBG w/ Hermetically Sealed Glass Tube (650F/343C max)3 Yellow/Black MBG w/ Lexan Frost Extension for -100F/-73C min (2" thick insulation)4 Red/White MBG w/ Lexan Frost Extension for -100F/-73C min (2" thick insulation)4 Yellow/Black MBG w/ Lexan Frost Extension for -200F/-129C min (3" thick insulation)4 Red/White MBG w/ Lexan Frost Extension for -200F/-129C min (3" thick insulation)4 Yellow/Black MBG w/ Lexan Frost Extension for -320F/-195C min (4" thick insulation)4 Red/White MBG w/ Lexan Frost Extension for -320F/-195C (4" thick insulation)4 None

Notes:
1 2

Not available when a transmitter is used for total & interface level combined. Add H to the indicator type to include insulation pad behind the indicator and raise the maximum temperature to 300F / 149C. 3 Add HS to the indicator type to include insulation pad and TEMPKOAT behind the indicator and raise the maximum temperature to 1000F / 538C. 4 Cryogenic unit indicator types are NOT field accessible.

19

MODEL NUMBER CONFIGURATION

/f Indicator Scale/Ruler
N A B C D E F G H
Notes:
1 2

No indicator housing (must select X for Indicator Type on previous page) SS housing; no scale SS housing; SS scale marked in ft / inches w/ 1/2" divisions (from 0 to 48 ft. standard3) SS housing; SS scale marked in meters/centimeters w/ 1 cm divisions 1 SS housing; SS scale marked in running inches w/ 1/2" divisions 2 SS housing; SS scale marked in running inches w/ 1/8" divisions 2 SS housing; custom SS scale (%, gallons, liters, etc.) SS housing; custom plastic scale (%, gallons, liters, etc.) 200F (93C) max with no insulation SS housing; dual scale; specify types

Standard rulers begin with 0 cm but can be specified from 100 cm to 10 meters. Standard rulers begin with 0 inches but can be specified from: 1/2 divisions: -48 to 216 OR 1/8 divisions: -48 to 144 3 Custom rulers available (Consult Factory - Choose /F or /G).

/g

Other Options
IH1 IH1D IH2 IH2D IH3 IH3D IL1 IL2 IL3 TT1 SJ ET1xx ET2x ET3x IV DV VV RD G GR S High Temp. Insulation; Float Chamber Only; 1/2" thick; 250F (121C) max2 High Temp. Insulation; Float Chamber & Vent / Drain Flanges; 1/2" thick; 250F (121C) max2 High Temp. Insulation; Float Chamber Only; 1" thick; 500F (260C) max2 High Temp. Insulation; Float Chamber & Vent / Drain Flanges; 1" thick; 500F (260C) max2 High Temp. Insulation; Float Chamber Only; 2" thick; 900F (482C) max1,2 High Temp. Insulation; Float Chamber & Vent / Drain Flanges; 2" thick; 900F (482C) max1,2 Cryogenic Insulation; 2" thick; single layer; -100F (-73C) minimum Cryogenic Insulation; 3" thick; double layer; -200F (-129C) minimum Cryogenic Insulation; 4" thick; double layer; -320F (-196C) minimum Steam Trace Tubing Steam / Water Jacket Electric Tracing; Class I, Div. 2, Gp BCD; 221F max (105C); fixed setpoint control3 Electric Tracing; Class I, Div. 2, Gp BCD; 400F max (204C); adjustable setpoint control3 Electric Tracing; Class I, Div. 1, Gp CD; 800F max (427C); adjustable setpoint control3 Isolation Valve (Specify valve manufacturer and model) Drain Valve (Specify valve manufacturer and model) Vent Valve (Specify valve manufacturer and model) Switch Mount Rod (High Temperature option for KM26 Switches) (Consult data sheet for temperature specifics.) Gussets on process connections Oversized chamber with guide rods for flashing Special (Consult factory)

Notes:

1. Insulation is 1 thick when a level transmitter and / or level switch is used regardless of maximum temperature. 2. K-TEK recommends chamber insulation for personnel safety. 3. Specify power supply 1) 110, 2) 220, 3) 277 OR 4) 440 VAC) (ex. ET21= ET2 with 110VAC power supply). For ET1xx series only, specify setpoint A) 35, B) 45, C) 60, D) 90 or E) 185F (1.7, 7.2, 15.6, 32.2, or 85C) (ex. ET11A = ET1 with 110VAC power supply and a setpoint of 35F)

/h /i

Center to Center / Face to Face

(specify in inches or mm)

B B

Measuring Length
(specify in inches or mm, only if different than the center to center dimensions)
FACE FACE ML TO ML TO FACE FACE

IMPORTANT NOTE: The information above is provided for the customer to indicate specific requirements. Only those requirements need to be specified. Other sizing & ratings not specified will be selected by the factory based on standard design & manufacturing practices using temperature, pressure & specific gravity data.

A A

Face to Face = A + B + ML * ML depends on the process conditions.

20

CHAMBER CONFIGURATION
Table 1 - Code Options / Definitions
B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 C0 C0L C0E C1 C1L C2 D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 FE F0 F0E F1 F2 F3E F3 F4 GE G G1 G3E G4 H0 H1 H2 H3 Blind Flange, with Float Stop Spring and Matching Slip-On Flange B0 with FNPT (see Note 2); 1/2 FNPT standard B0 with Plug (see Note 5); 1/2 Standard B0 with Socket Weld Coupling B0 with FNPT Coupling B0 with Nipple, for Socket Welding (Flat) B0 with Nipple, for Butt Welding (37.5 bevel) B0 with Nipple, MNPT B0 with Top Mount Indicator B0 with Reducing Spool Piece and Flange (see Note 7) B0 with Socket Weld Bore (see Note 3); 1/2 SW standard FNPT Coupling Sock-o-let (Min. SCH 40 Chamber) FNPT Coupling Connected via Extruded Outlet (See Note 4) Socket Weld Coupling Thread-o-let (Min. SCH 40 Chamber) C0 with plug Blind Flange with Float Stop Spring and a Mating Weld Neck Flange D0 with FNPT (see Note 2); 1/2 FNPT standard D0 with Plug (see Note 5); 1/2 standard D0 with Socket Weld Coupling D0 with FNPT Coupling D0 with Nipple, for Socket Welding (flat) D0 with Nipple, for Butt Welding (37.5 Bevel) D0 with Nipple, MNPT D0 with Top Mount Indicator D0 with Reducing Spool and Flange (See Note 7) D0 with Socket Weld Bore (see Note 3); 1/2 SW Standard Weld Neck Flange connected to chamber via Extruded Outlet (see Note 4) Weld Neck Flange (see Note 1) FE with Pipe Between Chamber & Weld Neck Flange (See Note 4) Weld Neck Flange with Weld-o-let (Min. SCH 40 Chamber) Weld Neck Flange with Weld-o-let and Concentric Reducer (Min. SCH 40 Chamber) Weld Neck Flange with Concentric Reducer connected to chamber via Extruded Outlet (see Note 4) Weld Neck Flange with Concentric Reducer Weld Neck Flange with Butt Weld Tee Slip-On Flange connected to chamber via Extruded Outlet (see Note 4) Slip-On Flange (See Note 1) Slip-On Flange with Weld-o-let and Pipe Nipple Slip-On Flange with Concentric Reducer connected to chamber via Extruded Outlet (See Note 4) Slip-On Flange with Butt Weld Tee and Pipe Nipple Indicator with Blind Flange Indicator with Blind Flange and removable Stilling Well Indicator with MNPT Plug Indicator with MNPT Plug with integral Stilling Well

21

CHAMBER CONFIGURATION
Table 1 - Code Options / Definitions
L LE L4 N0E N0 N2E N2 N3E N3 N6 S0 S1 S2 SW SWE T0 T2 T3 T4 T5 T6 T7 T9 W0 W1 W2 W3 W4 W5 W6 W7 W9 W10 X Stub End with Loose (Lap Joint) Flange Stub End with Loose (Lap Joint) Flange connected to chamber via Extruded Outlet (see Note 4) Stub End with Lap Joint Flange and Butt Weld Tee Branch Nipple for Socket Weld (Flat) connected to chamber via Extruded Outlet (see Note 4) Branch Nipple for Socket Weld (Flat) Branch Nipple for Butt Welding (37.5 Bevel) connected to chamber via Extruded Outlet (see Note 4) Branch Nipple for Butt Welding (37.5 Bevel) MNPT Branch Nipple connected to chamber via Extruded Outlet (see Note 4) MNPT Branch Nipple Weld-o-let for Butt Welding (Min. SCH 40 Chamber) Screwed Pipe Cap with Float Stop Spring (Min. SCH 40 Chamber) S0 with FNPT (see Note 2); 1/2 FNPT Standard (Min. SCH 40 Chamber) S0 with Plug (Min. SCH 40 Chamber) Socket Weld flange (see note 1) Socket Weld flange connected to chamber via Extruded outlet (see note 4) Butt Welded Dome Pipe Cap T0 with FNPT Coupling and Plug T0 with Socket Weld Coupling T0 with FNPT Coupling T0 with Nipple, for Socket Welding (Flat) T0 with Nipple, for Butt Welding (37.5 Bevel) T0 with Nipple, MNPT T0 with Nipple and Flange (See Note 7) Welded Flat Pipe Cap with Float Stop Spring W0 with FNPT (See Note 2); 1/2 FNPT standard W0 with Plug (See Note 5); 1/2 Standard W0 with Socket Weld Coupling W0 with FNPT Coupling W0 with Nipple, for Socket Welding (Flat) W0 with Nipple, for Butt Welding (37.5 Bevel) W0 with Nipple, MNPT W0 with Nipple and Flange (See Note 7) W0 with Socket Weld Bore (see Note 3); 1/2 SW Standard No Connection

Note 1: When a Weld Neck Flange (F0), a Fixed Flange (G) or (SW) option is a process connection on either end of the chamber as shown in the configuration tables these will be provided with a float stop bar or disk and spring to keep the float confined in the chamber. Note 2: 1/2 FNPT Standard; Optional FN7 (3/4) or FN1 (1). Specify after option D. Note 3: 1/2 SW Standard; Optional SW7 (3/4). Specify after option D. COUPLING SIZES Note 4: Extruded outlet can be utilized as follows FLANGES & NIPPLES Stainless Steel: Sch. 10 chambers with 1, 1-1/2 & 2 connections 3/4, 1, 1 1/4 1 1/4 Sch. 40 chambers with 1-1/2 & 2 connections 6 Alloy 20: Sch. 10 chambers with 1-1/2 & 2 connections 1 1/4 Hastelloy: Sch. 10 chambers with 1-1/2 & 2 connections 1 1/4 Note 5: 1/2 plug Standard; see Table 2 (Page 26) for additional sizes. Note 6: Cannot extrude SCH 40 seamless pipe. Note 7: Select B9, D9, T9 or W9 when flange connections are smaller than the chamber size at either the top and / or bottom of KM26.

22

CHAMBER CONFIGURATONS

TOP
Table 1 - Code Options / Graphics B0 B1 B2 B3 B4 B5 B6

B7

B9

B10

D0

D1

D2

D3

D4

D5

D6

D7

D9

D10

F0

S0

S1

S2

T0

T2

T3

T4

T5

T6

T7

T9

W0

W1

OR

W2

W3

W4

W5

W6

W7

W9
OR

W10

23

CHAMBER CONFIGURATONS

SIDE
Table 1 - Code Options / Graphics C0 C0L C0E C1 C1L C2 FE

F0

F0E

F1

F2

F3

F3E

GE

G1

G3E

LE

L4

N0E

NO

N2E

N2

N3E

N3

N6

SW

SWE

24

CHAMBER CONFIGURATONS

BOTTOM
Table 1 - Code Options / Graphics B0 B1 B2 B3 B4 B5 B6

B7

B9

B10

D0

D1

D2

D3

D4

D5

D6

D7

D9

D10

F0

S0

S1

S2

T0

T2

T3

T4

T5

T6

T7

T9
OR

W0

W1

W2

W3

W4

W5

W6

W7

W9
OR

W10

25

CONNECTION SIZES & RATINGS

Table 2
Flanged Connections Slip on Flanges: Size 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4 1 1 1 1 1-1/2 1-1/2 1-1/2 1-1/2 2 2 2 2 2-1/2 2-1/2 2-1/2 2-1/2 3 3 3 3 3 4 4 NOTES: Pressure Rating 150# 300# 600# 1500# 150# 300# 600# 1500# 150# 300# 600# 1500# 150# 300# 600# 1500# 150# 300# 600# 1500# 150# 300# 600# 1500# 150# 300# 600# 900# 1500# 150# 300# Loose Raised Flange Face L51 L53 L56 L515 L71 L73 L76 L715 L11 L13 L16 L115 L151 L153 L156 L1515 L21 L23 L26 L215 L251 L253 L256 L2515 L31 L33 L36 L39 L315 L41 L43 SR51 SR53 SR56 SR515 SR71 SR73 SR76 SR715 SR11 SR13 SR16 SR115 SR151 SR153 SR156 SR1515 SR21 SR23 SR26 SR215 SR251 SR253 SR256 SR2515 SR31 SR33 SR36 SR39 SR315 SR41 SR43 RTJ SJ51 SJ53 SJ56 SJ515 SJ71 SJ73 SJ76 SJ715 SJ11 SJ13 SJ16 SJ115 SJ151 SJ153 SJ156 SJ1515 SJ21 SJ23 SJ26 SJ215 SJ251 SJ253 SJ256 SJ2515 SJ31 SJ33 SJ36 SJ39 SJ315 SJ41 SJ43 Tongue & Groove ST51 ST53 ST56 ST515 ST71 ST73 ST76 ST715 ST11 ST13 ST16 ST115 ST151 ST153 ST156 ST1515 ST21 ST23 ST26 ST215 ST251 ST253 ST256 ST2515 ST31 ST33 ST36 ST39 ST315 ST41 ST43 Male / Female SM51 SM53 SM56 SM515 SM71 SM73 SM76 SM715 SM11 SM13 SM16 SM115 SM151 SM153 SM156 SM1515 SM21 SM23 SM26 SM215 SM251 SM253 SM256 SM2515 SM31 SM33 SM36 SM39 SM315 SM41 SM43 Socket Weld Weld Neck Flanges: Flanges: Raised Face SWR51 SWR53 SWR56 SWR515 SWR71 SWR73 SWR76 SWR715 SWR11 SWR13 SWR16 SWR115 SWR151 SWR153 SWR156 SWR1515 SWR21 SWR23 SWR26 SWR215 SWR251 SWR253 SWR256 SWR2515 SWR31 SWR33 SWR36 SWR39 SWR315 SWR41 SWR43 Raised Face WR51 WR53 WR56 WR515 WR71 WR73 WR76 WR715 WR11 WR13 WR16 WR115 WR151 WR153 WR156 WR1515 WR21 WR23 WR26 WR215 WR251 WR253 WR256 WR2515 WR31 WR33 WR36 WR39 WR315 WR41 WR43 RTJ WJ51 WJ53 WJ56 WJ515 WJ71 WJ73 WJ76 WJ715 WJ11 WJ13 WJ16 WJ115 WJ151 WJ153 WJ156 WJ1515 WJ21 WJ23 WJ26 WJ215 WJ251 WJ253 WJ256 WJ2515 WJ31 WJ33 WJ36 WJ39 WJ315 WJ41 WJ43 Tongue & Groove WT51 WT53 WT56 WT515 WT71 WT73 WT76 WT715 WT11 WT13 WT16 WT115 WT151 WT153 WT156 WT1515 WT21 WT23 WT26 WT215 WT251 WT253 WT256 WT2515 WT31 WT33 WT36 WT39 WT315 WT41 WT43 Male / Female WM51 WM53 WM56 WM515 WM71 WM73 WM76 WM715 WM11 WM13 WM16 WM115 WM151 WM153 WM156 WM1515 WM21 WM23 WM26 WM215 WM251 WM253 WM256 WM2515 WM31 WM33 WM36 WM39 WM315 WM41 WM43

1. Extruded Outlets are full bore up to a maximum of 2 See Note 4, Table 1 on page 23. 2. 1/2 to 2 1/2 flanges use 1500# if 900# is specified. 3. Flat face flanges can be supplied with the (SF) or (WF) designator. (i.e. For a 150# flat face slip-on. . . SF51) Nipples: Sch. 40 Std. Plugs: 1/2 Std. N54 N58 N51 N74 N78 N71 N14 N18 N11 1/2 3/4 1 2 3 4 6 P5 P7 P1 P2 P3 P4 P6

Threaded Couplings:
1/2 3/4 1 3000# 3000# 3000# C53 C73 C13

Socket Weld Couplings:

1/2 3/4 1 3000# 3000# 3000# SC53 SC73 SC13

1/2 1/2 1/2 3/4 3/4 3/4 1 1 1

Sch. 40 Sch. 80 Sch. 160 Sch. 40 Sch. 80 Sch. 160 Sch. 40 Sch. 80 Sch. 160 Screw-On Caps:

Sock-o-lets S23 S253 S33 S43 1/2 3/4 1 1-1/2 2 3000# 3000# 3000# 3000# 3000# S05 S07 S10 S15 S20 1/2 3/4 1 1-1/2 2 1/2 3/4 1 1-1/2 2

Thread-o-lets: 3000# 3000# 3000# 3000# 3000# 6000# 6000# 6000# 6000# 6000# T053 T073 T103 T153 T203 T056 T076 T106 T156 T206

2 2-1/2 3 4

3000# 3000# 3000# 3000#

26

TRANSMITTER & SWITCH ACCESSORIES

Magnetostrictive Level Transmitters AT200 AT600 Refer to AT200-0202-1 Data Sheet for Ordering Information Refer to AT600-0202-1 Data Sheet for Ordering Information

Magnetic Level Gauge Switches MS30 MS40 MS41 PS35 PS45 Refer to MS30-0202-1 Data Sheet for Ordering Information Refer to MS40-0202-1 Data Sheet for Ordering Information Refer to MS41-0202-1 Data Sheet for Ordering Information Refer to PS35-0202-1 Data Sheet for Ordering Information Refer to PS45-0202-1 Data Sheet for Ordering Information

Vibrating Level Switch RS80 RS85 Refer to RS80-0202-1 Data Sheet for Ordering Information Refer to RS85-0202-1 Data Sheet for Ordering Information

Thermal Dispersion Switch TX Refer to TX-0202-1 Data Sheet for Ordering Information

All Data Sheets are available on the K-TEK website at www.ktekcorp.com

Sample Accessories
KM26 with AT200 & MS41 KM26 with (2) MS40EXs KM26 with (1) TX & (1) RS80

27

EXAMPLE APPLICATIONS
C B

Top Process from side and Bottom Process from bottom of KM26 Example: KM26S/SS4/W0FEXG/WR-21-SR21/S1P/B/58/48 Top: Flat Pipe Cap w/ Float Stop Spring Side: Top RFWN w/ Extruded Outlet Bottom: No Process Connection Bottom: RF Slip-On Flange w/ Float Stop Spring

M L

M L

Top Process and Bottom Process from top and bottom of KM26 Example: KM26S/SS6/GXXG/SR21/S1P/B/64.5/48 Top: RF Slip-On Flange w/ Float Stop Spring Side: Top None Bottom: None Bottom: RF Slip-On Flange w/ Float Stop Spring

Top and Bottom Process Connection from side of KM26 Example: Top: Side: Bottom: KM26S/SS6/W0FEFEB0/WR21/S1P/B/48 Flat Pipe Cap w/ Float Stop Spring 2 ea. RFWN w/ Extruded Outlets Blind Flange w/ Float Stop Spring and Matching Slip-On Flange -total level -crude oil -0.80 s.g. at operating conditions -100 psig operating, 200 psig maximum -150F operating, 175F maximum -center to center 48 -measuring length 48
B

M L

28

EXAMPLE APPLICATIONS
Top Process from top and Bottom Process from bottom side of KM26 Example: KM26S/SS6/G(3)GEB0/SR251-SR21/S1P/42.5/36 Top: RF Slip-On Flange w/ Float Stop Spring Side: Top: RF Slip-On Flange Middle: RF Slip-On Flange Bottom: RF Slip-On Flange Bottom: Slip-On Flange w/ Float Stop Spring -interface level -oil / water -oil s.g. 0.80 @ operating conditions; water s.g. 1.00 @ operating conditions -100 psig operating, 200 psig maximum -150F operating, 175F maximum -center to face 42.5 -measuring length 36

Dual Level Application Example: Top: Side: KM26S/SS6/W0(3)FEB0/WR21/M1P/M2P/B/48 Flat Pipe Cap w/ Float Stop Spring Top: RFWN w/ Extruded Outlet Middle: RFWN w/ Extruded Outlet Bottom: RFWN w/ Extruded Outlet Blind Flange w/ Float Stop Spring and Matching Slip-On Flange -upper fluid level (yellow/black MBG-M1P) & interface level (red/white MBG-M2P) -crude oil & water -oil s.g. = 0.80 @ operating conditions; water s.g. 1.0 @ operating conditions -100 psig operating, 200 psig maximum -150F operating temperature, 175F maximum -center to center 48 -measuring length 48
B

Bottom:

M L

29

EXAMPLE APPLICATIONS
KM26T TOP MOUNT UNITS
Tank with Top Opening and with Stilling Well. Example: KM26T/SS6/H1/SR41/S1P/B/45/34 Top: Indicator with Blind Flange mounted on tank with existing stilling well

ML ML

54" 45

54"

ML ML

KM26T CONFIGURATION OPTIONS

H0 and H2 options are designed to be mounted on tanks with pre-existing stilling wells or on tanks with insertion lengths less than or equal to 24 with non-turbulent conditions. The minimum level that can be indicated with a top mount unit will depend on the specific gravity of the fluid and the process connection size. NOTE: A stilling well is recommended for insertion lengths (IL) greater than 24 or if turbulent conditions exist. KM26T options using a stilling well are available with maximum insertion lengths (IL) to 10 feet (120 inches). Consult factory for longer lengths

H0

H1

H2

H3

ML

ML

ML

ML

IL

IL

IL

IL

Top Mounted Indicators

If required by the application, the KM26 indicator with scale can be mounted on the top of the KM26 chamber. These options are called out as B8 and D8. Example: KM26S/B8FEFEB0/WR21/S1P/ B/48 Top: Blind flange with float spring and matching slipon flange top mount indicator Side: 2 ea. RFWN w/ Extruded Outlets Bottom: Blind Flange w/ Float Stop Spring and Matching Slip-On Flange -total level -crude oil -0.80 s.g. at operating conditions -100 psig operating, 200 psig maximum -150F operating, 175F maximum -center to center 48 -measuring length 48
X 6 X 6

3 in 0

3 in 0

B8

D8

30

QUOTATION REQUEST - KM26T-Top Mount

Tel: Fax: (1) 225-673-6100 / 800-735-5835 (1) 225-673-2525 E-mail: [email protected]
Contact: Fax #: Rep. Firm: Phone #: E-mail: Customer: Phone #: E-mail Process Conditions: Qty: KM26T Application for (circle one): Total Level Interface Level

Contact: Fax:

Upper fluid ______________Upper fluid specific gravity at operating conditions ___________ Range _________ Lower fluid _____________Lower fluid specific gravity at operating conditions ___________ Range__________ Operating Temp Chamber & Float Details: Chamber Material Max Temp Stilling Well Material (for H1 and H3 options) Process Connection Type: Diameter Operating Press Max Press Float Material

Process Connection Material

Insertion Length (IL) Nozzle Y or N

Size Schedule

Rating

If yes, Height

Indicator Details: Shuttle Yellow/Black MBG Red/White MBG Scale: Feet/Inch Meter/cm Custom Running In. (1/2 Div.) Running In. (1/8 Div.) Foundation Fieldbus HART LCD Honeywell DE

Special Requirements Accessories Required: (Circle all that apply.) Switches (Specify) Transmitter AT200 or AT600

Area Classification, Ratings or Approvals required: Circle the appropriate configuration below or attach a sketch: Note: Insertion length will always be greater than measuring length (ML). Please specify available insertion length (IL) and required measure length (ML). KM26T insertion lengths (IL) >24 require a stilling well. KM26T Configuration Options Option #1: $ ea.

H0
ML

H1
ML

H2
ML

H3
Option #2:
ML

$ $

ea. ea.

Option #3:

Option #4:
IL IL IL IL

ea.

Additional Notes or Comments:

31

QUOTATION REQUEST - KM26S-Side Mount

Tel: Fax: (1) 225-673-6100 / 800-735-5835 (1) 225-673-2525 E-mail: [email protected]
Contact: Fax #: Rep. Firm: Phone #: E-mail: Customer: Phone #: E-mail Process Conditions: Qty: KM26 Application for (circle one): Total Level

Contact: Fax:

Interface Level

Total & Interface

Operating Sp. Gravity: Fluid(s):

Min. Sp. Gravity:

Second Specific Gravity (Interface):

Operating Temp Max Temp Operating Press High Vibration Environment (Compressor Etc.) YES or NO (circle) Chamber & Float Details: Chamber Material Process Connection Type: Center to Center/Measuring Length Indicator Details: Shuttle Yellow/Black MBG Red/White MBG Scale: Float Material Size

Max Press

Flange Material Rating Vent/Drain Type & Size

Feet/Inch Meter/cm Custom Running In. (1/2 Div.) Running In. (1/8 Div.)

Special Requirements Accesssories Required (circle all that apply): Chamber Electric Heat Steam or Steam Specialty Magnetic Switches Transmitter Insulation Tracing* Water Jacket Tracing Process Particle (Specify) AT200 or AT600 * Specify Type:___________________________ Connection Traps (Specify) Area Classification, Ratings or Approvals required: Circle the appropriate configuration below or attach a sketch: Foundation FB HART LCD Honeywell DE Select Orientation: Indicator A B C Transmitter A B C Switch(es) A B C

FIG. A

FIG. B

FIG. C

FIG. D

FIG. E

FIG. F

FIG. G

A B

Note: Overall length will always be greater than measuring length (ML). Please specify if a max overall length is required.

Additional Notes or Comments:

Completed by K-TEK: KM26 p/n: Option #1: $

Quotation#:____________________By:__________Date:__________

Option #2: 32