0% found this document useful (0 votes)
241 views

Chap 4Lesson05Device Driver

A device driver is software that allows an operating system and applications to interact with hardware devices. It contains routines that control the device, send commands, communicate data, and handle interrupts. Device drivers provide a generic interface so programmers can access devices without knowing hardware details. They use interrupt service routines to run code in response to device events and implement device functions like reading, writing, and configuration.

Uploaded by

reneeshcz
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
241 views

Chap 4Lesson05Device Driver

A device driver is software that allows an operating system and applications to interact with hardware devices. It contains routines that control the device, send commands, communicate data, and handle interrupts. Device drivers provide a generic interface so programmers can access devices without knowing hardware details. They use interrupt service routines to run code in response to device events and implement device functions like reading, writing, and configuration.

Uploaded by

reneeshcz
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

DEVICE DRIVERS AND INTERRUPTS SERVICE MECHANISM

Lesson-5: Device Driver

2008

Chapter-4 L05: "Embedded Systems - " , Raj Kamal, Publs.: McGraw-Hill Education

Device driver definition


A device driver has a set of routines (functions) used by a high-level language programmer, which does the interaction with the device hardware, sends control commands to the device, communicates data to the device and runs the codes for reading device data.

2008

Chapter-4 L05: "Embedded Systems - " , Raj Kamal, Publs.: McGraw-Hill Education

Device driver routine Each device in a system needs devicedriver routine with number of device functions. An ISR relates to a device driver command (device-function). The device driver uses SWI to call the related ISR (device-function routine) The device driver also responds to device hardware interrupts.
Chapter-4 L05: "Embedded Systems - " , Raj Kamal, Publs.: McGraw-Hill Education

2008

Device driver generic commands


A programmer uses generic commands for device driver for using a device. The operating system provides these generic commands. Each command relates to an ISR. The device driver command uses an SWI to call the related ISR device-function routine)

2008

Chapter-4 L05: "Embedded Systems - " , Raj Kamal, Publs.: McGraw-Hill Education

Generic functions
Generic functions used for the commands to the device are device create ( ), open ( ), connect ( ), bind ( ), read ( ), write ( ), ioctl ( ) [for IO control], delete ( ) and close ( ).

2008

Chapter-4 L05: "Embedded Systems - " , Raj Kamal, Publs.: McGraw-Hill Education

Device driver code


Different in different operating system. Same device may have different code for the driver when system is using different operating system

2008

Chapter-4 L05: "Embedded Systems - " , Raj Kamal, Publs.: McGraw-Hill Education

Device driver
Does the interrupt service for any event related to the device and use the system and IO buses required for the device service. Device driver can be considered software layer between an application program and the device

2008

Chapter-4 L05: "Embedded Systems - " , Raj Kamal, Publs.: McGraw-Hill Education

Interrupt service routines


An Interrupt service routine (ISR) accesses a device for service (configuring, initializing, activating, opening, attaching, reading, writing, resetting, deactivating or closing). Interrupt service routines thus implements the device functions of the device driver

2008

Chapter-4 L05: "Embedded Systems - " , Raj Kamal, Publs.: McGraw-Hill Education

First level ISR and second level IST approach to handle the device hardware interrupts followed by software interrupt Device driver command 1 Run short code Signal ISR 1 Device driver command 2 Run short code Signal ISR 2 Interrupt (signal) ISR 1 Run codes of device function 1

Command c1 Interrupt Interrupt Command c2 device event e3 Interrupt


2008

Interrupt (signal) ISR 2 Run codes of device function 2


9

Chapter-4 L05: "Embedded Systems - " , Raj Kamal, Publs.: McGraw-Hill Education

Example (Contd.)
Application program commands to write on the display screen of a mobile the contact names from the contact database. It sends an SWI to call LCD display device-driver The driver run short code and executes another SWI to call the ISR related to write function at the LCD
2008 Chapter-4 L05: "Embedded Systems - " , Raj Kamal, Publs.: McGraw-Hill Education 10

Example
The device-driver does that without the application programmer knowing how does LCD device interface in the system, what are the addresses by which it is used, what and where and how used are the control (command) registers and status registers in that

2008

Chapter-4 L05: "Embedded Systems - " , Raj Kamal, Publs.: McGraw-Hill Education

11

Summary

2008

Chapter-4 L05: "Embedded Systems - " , Raj Kamal, Publs.: McGraw-Hill Education

12

We learnt
A device driver has a set of routines (functions) used by a high-level language programmer, which using the software interrupt instructions, does the interaction with the device hardware, sends control commands to the device, communicates data to the device and runs the codes for reading device data and also provide ISRs for the device hardware interrupts.
2008 Chapter-4 L05: "Embedded Systems - " , Raj Kamal, Publs.: McGraw-Hill Education 13

End of Lesson 5 of Chapter 4

2008

Chapter-4 L05: "Embedded Systems - " , Raj Kamal, Publs.: McGraw-Hill Education

14

You might also like