Scribd
Upload
799 views

FS 608 Spec Guide V8

The document provides specifications for the Konica Minolta bizhub C451 Booklet Finisher accessory. It has three output trays and can finish jobs by sorting, grouping, stapling, half-folding, center staple folding, and tri-folding paper sizes from 5.5x8.5 inches to 12x18 inches. The finisher supports a variety of paper types and has a large stacking capacity in the first tray. It draws power from the main unit and has optional punching available.

Uploaded by

Irfan Ice
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
799 views

FS 608 Spec Guide V8

The document provides specifications for the Konica Minolta bizhub C451 Booklet Finisher accessory. It has three output trays and can finish jobs by sorting, grouping, stapling, half-folding, center staple folding, and tri-folding paper sizes from 5.5x8.5 inches to 12x18 inches. The finisher supports a variety of paper types and has a large stacking capacity in the first tray. It draws power from the main unit and has optional punching available.

Uploaded by

Irfan Ice
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Konica Minolta bizhub C451

Specication & Installation Guide


7
Component Considerations (continued)
FS-608 BOOKLET FINISHER
Type Booklet Finisher
Output Trays Finishing Tray 1, Finishing Tray 2, Finishing Tray 3
Support Paper Type FINISHING TRAY 1 AND FINISHING TRAY 2: Plain Paper (17 lb. bond
to 24 lb. bond), Thick Paper 1/1+/2/3/4 (24.25 lb. bond to 79.75 lb. bond),
Overhead transparencies, postcards, envelopes, label sheets, letterhead
Punch Settings: Plain Paper (17 lb. bond to 24 lb. bond),
Thick Paper (24.25 lb. bond to 34 lb. bond)
Sort and Staple Settings: Plain Paper (17 lb. bond to 24 lb. bond),
Thick Paper 1/1+/2 (24.25 lb. bond to 55.5 lb. bond)
FINISHING TRAY 3: Plain Paper (17 lb. bond to 24 lb. bond)
Support Paper Size FINISHING TRAY 1: 12" x 18" to 5.5" x 8.5", 12.25" x 18", 8" x 13"
Staple Settings: 12" x 18" to 5.5" x 8.5", 12.25" x 18, 8" x 13"
*1

FINISHING TRAY 2: 12" x 18" to 5.5" to 8.5", 12.25" x 18", 8" x 13"
*1

FINISHING TRAY 3: Half-Fold: 11" x 17", 8.5" x 14", 8.5" x 11, 12.25" x 18"
Center Staple and Fold: 11" x 17", 8.5" x 14", 8.5" x 11", 12.25" x 18"
Tri-Fold: 8.5" x 11"
Mode Sort, Group, Sort/Offset, Group/Offset, Sort and Staple, Half-Fold,
Center Staple and Fold and Tri-Fold
Stacking Capacity FINISHING TRAY 1: Plain Paper (21.25 lb. bond) 2,500 sheets of
8.5" x 11" or smaller; 1,500 sheets of 8" x 13" or larger; Index cards,
wide paper and non-standard -size paper: 1,500 sheets; Thick Paper
(21.25 lb. bond to 55.5 lb. bond): 750 sheets; Thick Paper (55.75 lb.
bond to 79.75 lb. bond): 500 Sheets; Envelopes: 10 sheets
FINISHING TRAY 2: Plain Paper (21.25 lb. bond): 100 sheets
FINISHING TRAY 3: Center Staple & Fold (5 bound sheets):
15 to 20 sets or less
Half-Fold (3 sheets): 25 to 33 sets or less
Tri-Fold (1 sheet): 50 sets or less
Maximum Number Staple: Plain Paper (17 lb. bond to 21.25 lb. bond): 50 sheets
of Bound Sheets (21.5 lb. bond to 24 lb. bond): 16 sheets.
Center Staple Plain Paper (17 lb. bond to 21.25 lb. bond): 20 sheets
and Fold: (equivalent to 80-page booklets);
(21.25 lb. bond to 24 lb. bond): 16 sheets
(equivalent to 64-page booklets)
Staple Mode Corner, 2-Position (Top/Side), Center (Booklet)
Punch Settings By optional Punch Kit
Available Option PK-512 Punch Kit (2/3-hole Punch)
Power Requirements Supplied from Main Unit
Max. Power Consumption 80 W or less
Dimensions W x D x H 26.25" (31")* x 25.75" x 40.5" *with paper tray pulled out
Weight Approx. 149.75 lb.
Consumables SK-602 Staples (5,000 Staples x 3)
* There are ve Foolscap sizes: 220 x 330 mm, 8.5" x 13", 8.25" x 13", 8.5" x 13.25" and 8" x 13". Any one of these sizes can be
selected. For details, contact the technical representative.

You might also like