Scribd
Upload
3K views

Conversion of Gas Flow From m3 To Nm3

The document describes how to convert gas flow measurements from cubic meters (m3) to normal cubic meters (Nm3). It lists the site elevation, air pressure, temperature corrections, and static pressure used to calculate a total correction factor. It then applies this factor to convert an input gas flow of 3890 m3/hr to an output of 3522.7 Nm3/hr. A second example shows converting 45 kg of Cao (calcium oxide) to CaCo3 (calcium carbonate) by calculating the molecular weights and masses.

Uploaded by

vvijaybhan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
3K views

Conversion of Gas Flow From m3 To Nm3

The document describes how to convert gas flow measurements from cubic meters (m3) to normal cubic meters (Nm3). It lists the site elevation, air pressure, temperature corrections, and static pressure used to calculate a total correction factor. It then applies this factor to convert an input gas flow of 3890 m3/hr to an output of 3522.7 Nm3/hr. A second example shows converting 45 kg of Cao (calcium oxide) to CaCo3 (calcium carbonate) by calculating the molecular weights and masses.

Uploaded by

vvijaybhan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Calculation of gas Flow from m3 to Nm3

Site height MSL m AIR PRESSURE, m bar HEIGHT CORRECTION TEMPERATURE OF MEDIUM C TEMPERATURE CORRECTION FACTOR C STATIC PRESSURE ,m bar PRESSURE CORRECTION FACTOR TOTAL CORRECTION FLOW IN ,M3/HR FLOW OF GAS .NM3/HR 10 1011.799 1.0012 40 1.15 40 0.962 1.104 3890 3522.7

Convert Cao into Caco3

Cao Ca CaCo3

45 32.157

CaO CaCo3

80.3925

56 100 1.79

45 80.357

You might also like