Automotive

Selection Guide
Amplifiers
Audio
Comparators
Data Converters
Embedded Processors
Interface
Microcontrollers
Power Management
3Q 2009 www.ti.com/automotive
Automotive Selection Guide Texas Instruments 3Q 2009
Analog Automotive Guide
Table of Contents
2

Operational Amplifiers/Comparators
Current-Shunt Monitors 3
Precision/Low-Voltage Operational Amplifiers 3-4
Low-Power/Wide-Voltage-Range Operational Amplifiers 5
High-Speed/General-Purpose Operational Amplifiers 6
Comparators 7
Power Management
Low-Dropout Regulators (LDOs) 8-9
DC/DC Controllers and Converters 10
LED Drivers 12
PWM Power Supply Controllers 13
USB Power Switches 13
Supervisors 14
References 14
Power and Control 15
Interface
CAN/LIN 16
Isolation 17
Level Translation 17
LVDS 17
RS-485/422/232 17-18
Data Converters/Audio 18-19
Microcontrollers/Embedded Processors
TMS320C2000
TM
Microcontrollers 20-21
DaVinci
TM
Processors 22
Design Support 23
Texas Instruments Commitment to Automotive
Texas Instruments (TI) is committed to providing superior
cost-effective solutions to the automotive market along
with benchmark service in terms of excellent product
documentation, on-time delivery and conformance to
specifications
Availability/Commitment
TI supports the requirements defined by the automotive
industry, and continues to add to our automotive portfolio
With more than 30 years of experience serving customers
with demanding requirements, TI enables customers to
achieve the quality, reliability and cost goals needed to
succeed in todays marketplace
TI Automotive Capabilities
TS16949certified
Automotivetemperaturerange
Automotivequalification
Sixmonthproductchange
notification
TI Worldwide Technical Support
Internet
TI Semiconductor Product Information Center Home Page
support.ti.com
TI Semiconductor KnowledgeBase Home Page
support.ti.com/sc/knowledgebase
Product Information Centers
Americas Phone +1(972) 644-5580
Brazil Phone 0800-891-2616
Mexico Phone 0800-670-7544
Fax +1(972) 927-6377
Internet/Email support.ti.com/sc/pic/americas.htm
Europe, Middle East, and Africa
Phone
European Free Call 00800-ASK-TEXAS
(00800 275 83927)
International +49 (0) 8161 80 2121
Russian Support +7 (4) 95 98 10 701
Note: The European Free Call (Toll Free) number is not active in all countries. If you have tech-
nical difficulty calling the free call number, please use the international number above.
Fax +(49) (0) 8161 80 2045
Internet support.ti.com/sc/pic/euro.htm
Japan
Fax
International +81-3-3344-5317 Domestic 0120-81-0036
Internet/Email
International support.ti.com/sc/pic/japan.htm
Domestic www.tij.co.jp/pic
Asia
Phone
International +91-80-41381665
Domestic Toll-Free Number Toll-Free Number
Australia 1-800-999-084 Malaysia 1-800-80-3973
China 800-820-8682 New Zealand 0800-446-934
Hong Kong 800-96-5941 Philippines 1-800-765-7404
India 1-800-425-7888 Singapore 800-886-1028
Indonesia 001-803-8861-1006 Taiwan 0800-006800
Korea 080-551-2804 Thailand 001-800-886-0010
Fax +886-2-2378-6808 Email [email protected]
Internet support.ti.com/sc/pic/asia.htm [email protected]
C093008
Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described
herein are sold subject to TIs standard terms and conditions of sale. Customers are advised to obtain the most
current and complete information about TI products and services before placing orders. TI assumes no liability for
applications assistance, customers applications or product designs, software performance, or infringement of
patents. The publication of information regarding any other companys products or services does not constitute
TIs approval, warranty or endorsement thereof.
Safe Harbor Statement: This publication may contain forward-looking statements that involve a number of
risks and uncertainties. These forward-looking statements are intended to qualify for the safe harbor from
liability established by the Private Securities Litigation Reform Act of 1995. These forward-looking statements
generally can be identified by phrases such as TI or its management believes, expects, anticipates,
foresees, forecasts, estimates or other words or phrases of similar import. Similarly, such statements herein
that describe the company's products, business strategy, outlook, objectives, plans, intentions or goals also are
forward-looking statements. All such forward-looking statements are subject to certain risks and uncertainties
that could cause actual results to differ materially from those in forward-looking statements. Please refer to TI's
most recent Form 10-K for more information on the risks and uncertainties that could materially affect future
results of operations. We disclaim any intention or obligation to update any forward-looking statements as a
result of developments occurring after the date of this publication.
Trademarks in this issue: The platform bar, SWIFT, TMS320C2000, C64x+, VLYNQ, eLab, PowerPAD, Piccolo,
Delfino, TMS320, C28x, FlatLink and DaVinci are trademarks of Texas Instruments. All other trademarks are the
property of their respective owners.
2009 Texas Instruments Incorporated
The new OPA2333 zero-drift amplifier achieves precision performance at 1/10th the
power of the nearest competition Featuring ultra-low offset, ultra-low quiescent current,
miniature packages and operation down to 18V, the OPA333 targets demanding
applications in medical instrumentation, temperature measurement, test equipment,
security and consumer systems
V+
OUT B
OUT B
+ IN B
1
2
3
4
8
7
6
5
0.1-Hz to 10-Hz Noise
1 s/Div
5
0
0

n
V
/
D
i
v
Texas Instruments 3Q 2009 Automotive Selection Guide
New Section Head
Current-Shunt Monitors
3

Operational Amplifiers/Comparators 3

Current-Shunt Monitors Selection Guide

Device Description Gain V/V
Common
Mode Input
Range (min)
(V)
Input
Offset ()
(max) (mV)
Input
Offset
Drift ()
(typ)
(V/C)
CMRR
(min)
(dB)
Small Signal
Bandwidth
(typ) (MHz)
Quiescent
Current
() (typ)
(mA)
VS
(min)
(V)
VS
(max)
(V)
Auto
Qual
(Q1)
INA193A/4A/5A Wide common mode 20, 50, 100 16 to 80 2 2.5 100 0.5, 0.3, 0.2 0.37 2.7 18 Y
INA196A/7A/8A Wide common mode 20, 50, 100 16 to 80 2 2.5 100 0.5, 0.3, 0.2 0.37 2.7 18 Y
INA21xA Voltage output, high/low-side measurement,
bi-directional zero-drift series
50, 100, 200,
500, 1000
0.3 to 26 .035, .06,
0.1
0.5 105 0.014 0.065 2.7 26 Y
INA138 Current output 1 to 100 2.7 to 36 2 1 100 0.8 0.025 2.7 36 Y
INA139 Current output 1 to 100 2.7 to 36 2 1 100 0.44 0.06 2.7 40 Y
INA168 Current output, wide supply range 1 to 100 2.7 to 60 2 1 100 0.8 0.025 2.7 60 Y
INA169 Current output, wide supply range 1 to 100 2.7 to 60 2 1 100 0.44 0.06 2.7 60 Y
INA148 Common mode diff amp 1 200 to 200 5 100 70 0.1 0.6 2.7 36 Y
Precision/Low-Voltage Operational Amplifiers

1
x indicates: 0 = single with shutdown, 1 = single, 2 = dual, 3 = dual with shutdown, 4 = quad, 5 = quad with shutdown. y indicates: no character = single, 2 = dual, 3 = triple, 4 = quad.
Precision Operational Amplifers (V
IO
1mV) Selection Guide
Device
1
Description Ch.
VS
(min)
(V)
VS
(max)
(V)
Iq per
Ch.
(max)
(mA)
GBW
(typ)
(MHz)
Slew
Rate
(typ)
(V/s)
VIO
(25C)
(max)
(mV)
Offset
Drift
(typ)
(V/C)
IB
(25C)
(max)
(pA)
CMRR
(min)
(dB)
VN at
1 kHz
(typ)
(nV/ Hz)
Single
Supply
Rail-
to-
Rail
Auto
Qual
(Q1)
OPA2333 Zero drift 1, 2 1.8 5.5 0.017 0.35 0.16 0.01 0.02 200 106 1.1 Y I/O Y
TLE2037A High speed, reduced V
IO
1 8.0 38 5.3 50 7.5 0.025 0.2 90000 117 2.5 N N Y
TLE2037 High speed 1 8.0 38 5.3 50 7.5 0.1 0.4 90000 100 2.5 N N Y
TLE202xA Wide voltage range, reduced V
IO
1, 2, 4 4.0 40 0.3 1.2 0.5 0.4 2 70000 82, 85, 87 17 Y Y
TLE202x Wide voltage range 1, 2, 4 4.0 40 0.3 1.2 0.5 0.6 2 70000 85, 80 17 Y Y
TLC225xA Power, rail-to-rail output,
reduced V
IO
2, 4 4.4 16 0.0625 0.2 0.12 0.85 0.5 60 70 19 Y Out Y
TLV225xA Low voltage, rail-to-rail
output, reduced V
IO
2, 4 2.7 16 0.0625 0.2 0.1 0.85 0.5 60 65 19 Y Out Y
TLC226xA Rail-to-rail output, reduced V
IO
2, 4 4.4 16 0.25 0.71 0.55 0.95 2 800 70 12 Y Out Y
TLV226xA Rail-to-rail output, reduced V
IO
2, 4 2.7 8 0.25 0.67 0.55 0.95 2 60 65 12 Y Out Y
TLC227xA Low noise, reduced V
IO
2, 4 4.4 16 1.5 2.2 3.6 0.95 2 60 70 9 Y Out Y
TLV2422A Low voltage, reduced V
IO
2 2.7 10 0.075 0.052 0.02 0.95 2 60 70 23 Y Out Y
TLV243xA RRIO, reduced V
IO
2, 4 2.7 10 0.125 0.5 0.25 0.95 2 60 70 18 Y I/O Y
TLV244xA Reduced V
IO
2, 4 2.7 10 1.1 1.75 1.3 0.95 2 260 65 18 Y Out Y
Key Features
2Voffset
0.02V/Cdrift
1.2V
PP
noise
17Aquiescentcurrent
350kHzgainbandwidth
Rail-to-railinputandoutput
1.8Vto5.5Vsupplyvoltage
Packaging:MSOP,SOIC,SON
(miniature)
Zero-Drift Amplifier
OPA2333-Q1
Getsamplesanddatasheetsat:www.ti.com/sc/device/OPA2333-Q1
Automotive Selection Guide Texas Instruments 3Q 2009
Operational Amplifiers/Comparators
Precision/Low-Voltage Operational Amplifiers
4

Low-Voltage Operational Amplifers (V

S
2.7V) Selection Guide
Device
1
Description Ch. SHDN
VS
(min)
(V)
VS
(max)
(V)
Iq per
Ch.
(max)
(mA)
GBW
(typ)
(MHz)
Slew
Rate
(typ)
(V/s)
VIO
(25C)
(max)
(mV)
Offset
Drift
(typ)
(V/C)
IB
(max)
(pA)
VN at
1 kHz
(typ)
(nV/ Hz)
Rail-
to-
Rail
Auto
Qual
(Q1)
OPAy333 Zero drift 1, 2 N 1.8 5.5 0.017 0.35 0.16 0.01 0.02 200 1.1 I/O Y
LMV93x 1.8V with RRIO 1, 2, 4 N 1.8 5.5 0.185 1.4 0.35 4 5.5 65000 60 I/O Y
OPAy348 1MHz, 45A, RRIO 1, 2, 4 N 2.1 5.5 0.065 1 0.5 5 2 10 35 I/O Y
TLV277x High slew rate 1, 2, 4 Y 2.5 6.0 2 5.1 2.7 2.5 2 60 21 Out Y
TLV240x Wide voltage range,
sub-Power, RRIO
1, 2, 4 N 2.5 16 0.00095 0.0055 0.0025 1.2 3 300 I/O Y
LMV34x Rail-to-rail output 1, 2, 4 Y 2.5 5.5 0.17 1 1 4 1.7 120 40 Out Y
LMV82x Wide bandwidth 1, 2, 4 N 2.5 5.5 0.3 5 2.5 6 1 90000 45 Out Y
TLV2422 Low power, rail-to-rail output 2 N 2.7 10 0.075 0.052 0.02 2 2 60 23 Out Y
TLV237x Wide voltage range, 3MHz 1, 2, 4 Y 2.7 16 0.66 3 2.4 4.5 2 60 39 I/O Y
TLV244x Rail-to-rail output 2, 4 N 2.7 10 1.1 1.75 1.3 2 2 260 18 Out Y
TLV246x Low noise, wide bandwidth,
25-mA drive
1, 2, 4 Y 2.7 6.0 0.575 6.4 1.6 2 2 14000 11 I/O Y
TLV246xA Low noise, wide bandwidth,
25-mA drive
1, 2, 4 Y 2.7 6.0 0.575 6.4 1.6 1.5 2 14000 11 I/O Y
TLV247x Low bias current, 35mA drive 1, 2, 4 Y 2.7 6.0 0.75 6.4 1.4 2.2 0.4 50 15 I/O Y
TLV225x Wide voltage range 2, 4 N 2.7 16 0.0625 0.187 0.1 1.5 0.5 60 19 Out Y
LMV324/
LMV358
Low power 2, 4 N 2.7 5.5 0.25 1 1 7 5 250000 39 Out Y
TLV27x Wide voltage range, 3MHz 1, 2, 4 N 2.7 16 0.66 3 2.4 5 2 60 39 Out Y
TL97x Very low noise 1, 2, 4 N 2.7 12 3.2 12 5 6 5 750000 4 Out Y
TLV226xA Rail-to-rail output, reduced V
IO
2, 4 N 2.7 8 0.25 0.67 0.55 0.95 2 60 12 Out Y
1
x indicates: 0 = single with shutdown, 1 = single, 2 = dual, 3 = dual with shutdown, 4 = quad, 5 = quad with shutdown. y indicates: no character = single, 2 = dual, 3 = triple, 4 = quad.
Texas Instruments 3Q 2009 Automotive Selection Guide
Operational Amplifiers/Comparators
Low-Power/Wide-Voltage-Range Operational Amplifiers
5

Low-Power Operational Amplifers (Iq 1mA) Selection Guide

Device
1
Description Ch. SHDN
VS
(min)
(V)
VS
(max)
(V)
Iq per
Ch.
(max)
(mA)
GBW
(typ)
(MHz)
Slew Rate
(typ)
(V/s)
VIO
(25C)
(max)
(mV)
Offset
Drift
(typ)
(V/C)
IB
(max)
(pA)
VN at
1 kHz
(typ)
(nV/ Hz)
Rail-
to-
Rail
Auto
Qual
(Q1)
TLV240x Wide voltage range, sub-Power, RRIO 1, 2, 4 N 2.5 16 0.00095 0.0055 0.0025 1.2 3 300 I/O Y
OPAy333 Zero drift 1, 2 N 1.8 5.5 0.017 0.35 0.16 0.01 0.02 200 1.1 I/O Y
TLV225x Wide voltage range 2, 4 N 2.7 16 0.0625 0.187 0.1 1.5 0.5 60 19 Out Y
TLC225x Power, rail-to-rail output 2, 4 N 4.4 16 0.0625 0.2 0.12 1.5 0.5 60 19 Out Y
OPAy348 1MHz, 45A, RRIO 1, 2, 4 N 2.1 5.5 0.065 1 0.5 5 2 10 35 I/O Y
TLV243x RRIO 2, 4 N 2.7 10 0.125 0.5 0.25 2 2 300 18 I/O Y
TLV2422 Low power, rail-to-rail output 2 N 2.7 10 0.075 0.052 0.02 2 2 60 23 Out Y
LMV93x 1.8V with RRIO 1, 2, 4 N 1.8 5.5 0.185 1.4 0.35 4 5.5 65000 60 I/O Y
LMV34x Rail-to-rail output 1, 2, 4 N 2.5 5.5 0.2 1 1 4 1.7 120 40 Out Y
LMV358 Low power 2 N 2.7 5.5 0.2 1 1 7 5 250000 46 Out Y
TLC226x Rail-to-rail output 2, 4 N 4.4 16 0.25 0.82 0.55 2.5 2 100 12 Out Y
TLV226xA Rail-to-rail output, reduced V
IO
2, 4 N 2.7 8 0.25 0.67 0.55 0.95 2 60 12 Out Y
LMV32x Low power 1, 2, 4 N 2.7 5.5 0.25 1 1 7 5 250000 39 Out Y
TLE202x Wide voltage range 1, 2, 4 N 4.0 40 0.3 1.2 0.5 0.6 2 70000 17 N Y
LMV82x Wide bandwidth 1, 2, 4 N 2.5 5.5 0.3 5 2.5 6 1 90000 45 Out Y
TLV246x Low noise, wide bandwidth,
25-mA drive
1, 2, 4 Y 2.7 6.0 0.575 6.4 1.6 2 2 14000 11 I/O Y
TLV237x Wide voltage range, 3MHz 1, 2, 4 Y 2.7 16 0.66 3 2.4 4.5 2 60 39 I/O Y
TLV27x Wide voltage range, 3MHz 1, 2, 4 N 2.7 16 0.66 3 2.4 5 2 60 39 Out Y
TLV247x Low bias current, 35-mA drive 1, 2, 4 Y 2.7 6.0 0.75 2.8 1.4 2.2 0.4 50 15 I/O Y
Wide-Voltage-Range Operational Amplifers (V
S
15V) Selection Guide
Device
1
Description Ch.
VS
(min)
(V)
VS
(max)
(V)
Iq per
Ch.
(max)
(mA)
GBW
(typ)
(MHz)
Slew
Rate
(typ)
(V/s)
VIO
(25C)
(max)
(mV)
Offset
Drift
(typ)
(V/C)
IB
(max)
(pA)
CMRR
(min)
(dB)
VN at
1 kHz
(typ)
(nV/ Hz)
Single
Supply
Rail-
to-
Rail
Auto
Qual
(Q1)
TLE202x Precision, single supply, low
power
1, 2, 4 4.0 40 0.3 1.2 0.5 0.6 2 70000 85 17 Y N Y
TLE207x Low noise, high speed,
JFET-input
1, 2 4.5 38 1.8 10 45 6 2.4 175 80 14 N N Y
TLE2037 Low noise, high speed,
precision
1 8.0 38 5.3 50 7.5 0.1 0.4 90000 100 2.5 N N Y
TL347x Enhanced general purpose 2, 4 4.0 36 4.5 4 13 12 10 500000 65 49 Y N Y
TL08x JFET input, general purpose 1, 2, 4 7.0 36 2.8 3 13 15 18 400 70 18 N N Y
TLV240x Sub-Power, RRIO 1, 2, 4 2.5 16 0.00095 0.0055 0.0025 1.2 3 300 63 Y I/O Y
TLV225x Low power, rail-to-rail output 2, 4 2.7 16 0.0625 0.2 0.1 1.5 0.5 60 65 19 Y Out Y
TLV27x 550A/ch, 3MHz, rail-to-rail
output
1, 2, 4 2.7 16 0.66 3 1.4 5 2 60 58 39 Y Out Y
TLV237x 550A, 3MHz 1, 2, 4 2.7 16 0.66 3 2.4 4.5 2 60 57 39 Y I/O Y
TLC225x Low power, rail-to-rail output 2, 4 4.4 16 0.0625 0.2 0.1 1.5 0.5 60 70 19 Y Out Y
TLC227x Low noise, rail-to-rail output 2, 4 4.4 16 1.5 2.2 3.6 2.5 2 60 70 9 Y Out Y
TLC226x Low power, rail-to-rail output 2, 4 4.4 16 0.25 0.82 0.55 2.5 2 800 70 12 Y Out Y
TLC07x Low noise, high drive 1, 2, 4 4.5 16 2.5 10 16 1.9 1.2 50 100 7 Y N Y
TLC08x Low noise, high drive, input
range including GND
1, 2, 4 4.5 16 2.5 10 16 1.9 1.2 50 70 8.5 Y N Y
1
x indicates: 0 = single with shutdown, 1 = single, 2 = dual, 3 = dual with shutdown, 4 = quad, 5 = quad with shutdown. y indicates: no character = single, 2 = dual, 3 = triple, 4 = quad.
1
x indicates: 0 = single with shutdown, 1 = single, 2 = dual, 3 = dual with shutdown, 4 = quad, 5 = quad with shutdown. y indicates: no character = single, 2 = dual, 3 = triple, 4 = quad.
Automotive Selection Guide Texas Instruments 3Q 2009
Operational Amplifiers/Comparators
High-Speed/General-Purpose Operational Amplifiers
6

High-Speed Operational Amplifers (GBW 10MHz) Selection Guide

Device
1
Description Ch.
VS
(min)
(V)
VS
(max)
(V)
Iq per
Ch.
(max)
(mA)
GBW
(typ)
(MHz)
Slew
Rate
(typ)
(V/s)
VIO
(25C)
(max)
(mV)
Offset
Drift
(typ)
(V/C)
IB
(max)
(pA)
CMRR
(min)
(dB)
VN at
1 kHz
(typ)
(nV/ Hz)
Single
Supply
Rail-
to-
Rail
Auto
Qual
(Q1)
THS4509 Wideband fully differential 1 3.0 5.5 38 3000 6600 1 2.6 13000 90 1.9 N N Y
OPAy356A 2.5V, 200MHz GBW,
CMOS single op amp
1, 2 2.5 5.5 14 200 360 9 7 50000 66 5.8 Y Out Y
THS4041 165MHz C-stable,
high-output drive
1 9.0 32 10 165 400 13 10 70 14 N N Y
TLE2037 Low noise, precision,
wide voltage range
1 8.0 38 5.3 50 7.5 0.1 0.4 90000 100 2.5 N N Y
LM218 Wide voltage range 1 10 40 8 15 70 10 250000 80 N N Y
TL97x Low voltage, low noise 1, 2, 4 2.7 12 3.2 12 5 6 5 750000 60 4 Y Out Y
TLE207x Low noise, JFET input 1, 2, 4 4.5 38 1.8 10 45 6 2.4 175 80 14 N N Y
TLC07x Low noise, high drive 1, 2, 4 4.5 16 2.5 10 16 1.9 1.2 50 95 7 Y N Y
TLC08x Low noise, high drive,
input range including GND
1, 2, 4 4.5 16 2.5 10 16 1.9 1.2 50 70 8.5 Y N Y
General-Purpose Operational Amplifers Selection Guide
Device
1
Description Ch.
VS
(min)
(V)
VS
(max)
(V)
Iq per
Ch.
(max)
(mA)
GBW
(typ)
(MHz)
Slew
Rate
(typ)
(V/s)
VIO
(25C)
(max)
(mV)
Offset
Drift
(typ)
(V/C)
IB
(max)
(pA)
CMRR
(min)
(dB)
VN at
1 kHz
(typ)
(nV/ Hz)
Single
Supply
Auto
Qual
(Q1)
LM218 High-speed op amp 1 10 40 8 15 70 10 250000 80 N Y
LM2902 General purpose 4 3.0 26 0.3 1.2 0.5 7 7 250000 50 35 Y Y
LM2902KV Voltage enhanced, 2-kV ESD 4 3.0 32 0.3 1.2 0.5 7 7 250000 50 35 Y Y
LM-
2902KAV
Voltage enhanced, 2-kV
ESD, reduced V
IO
4 3.0 32 0.3 1.2 0.5 2 7 250000 50 35 Y Y
LM2904 General purpose 2 3.0 26 0.6 0.7 0.3 7 7 250000 50 40 Y Y
LM2904AV Voltage enhanced, reduced V
IO
2 3.0 32 0.6 0.7 0.3 2 7 250000 65 40 Y Y
LM2904V Voltage enhanced 2 3.0 32 0.6 0.7 0.3 7 7 250000 65 40 Y Y
LMV32x Low voltage, rail-to-rail
output
1, 2, 4 2.7 5.5 0.25 1 1 7 5 250000 50 39 Y Y
LMV34x Rail-to-rail output 1, 2, 4 2.5 5.5 0.2 1 1 4 1.7 120 56 40 Y Y
LMV358 Low voltage, rail-to-rail
output
2 2.7 5.5 0.2 1 1 7 5 250000 46 39 Y Y
LMV82x Low voltage, low power,
rail-to-rail output
1, 2, 4 2.5 5.5 0.3 5 2.5 6 1 90000 45 42 Y Y
LMV93x 1.8V with RRIO 1, 2, 4 1.8 5.5 0.185 1.4 0.35 4 5.5 65000 60 60 Y Y
TL08x Low noise, JFET input 1, 2, 4 7.0 36 2.8 3 13 15 18 400 70 18 N Y
TL347x Enhanced general purpose 2, 4 4.0 36 4.5 4 13 12 10 500000 65 49 Y Y
TLC227x Low noise, rail-to-rail output 2, 4 4.4 16 1.5 2.18 3.6 2.5 2 250000 80 9 Y Y
TLV27x 550A/ch 3MHz rail-to-rail
output
1, 2, 4 2.7 16 0.66 3 1.4 5 2 60 58 39 Y Y
1
x indicates: 0 = single with shutdown, 1 = single, 2 = dual, 3 = dual with shutdown, 4 = quad, 5 = quad with shutdown. y indicates: no character = single, 2 = dual, 3 = triple, 4 = quad.
1
x indicates: 0 = single with shutdown, 1 = single, 2 = dual, 3 = dual with shutdown, 4 = quad, 5 = quad with shutdown. y indicates: no character = single, 2 = dual, 3 = triple, 4 = quad.
Texas Instruments 3Q 2009 Automotive Selection Guide
Operational Amplifiers/Comparators
Comparators
7

Comparators Selection Guide

Device
1
Description Ch.
VS
(min)
(V)
VS
(max)
(V)
Iq per
Ch.
(max)
(mA)
VIO
(25C)
(max)
(mV)
tRESP
Low-to-High (s)
Output
Current
(min)
(mA)
Output
Type
Auto
Qual
(Q1)
High Speed t
RESP
0.2s
LM211 High speed, strobed 1 3.5 30 6 3 0.115 Open drain Y
LMV331 Low voltage 1 2.7 5.5 0.1 7 0.2 10 Open drain Y
LMV393 Low voltage 2 2.7 5.5 0.1 7 0.2 5 Open drain Y
Low Power I
q
< 0.5mA
TLV370x Nanopower, push-pull, RRIO 1, 2, 4 2.5 16 0.0008 5 36 Push pull Y
TLC370x Fast, low power 2, 4 4.0 16 0.02 5 1 4 Push pull Y
TLC393 General purpose, low power 2 4.0 16 0.02 5 1 6 Open drain Y
LMV331 General purpose, low voltage 1 2.7 5.5 0.1 7 0.2 10 Open drain Y
LMV393 General purpose, low voltage 2 2.7 5.5 0.1 7 0.2 5 Open drain Y
LP2901 General purpose, low power 4 3.0 30 0.5 5 1.3 6 Open drain Y
Wide Voltage Range VS 16V
LM2901V Voltage enhanced 4 2.0 32 0.625 7 0.3 6 Open drain Y
LM2901AV Voltage enhanced, reduced V
IO
4 2.0 32 0.625 2 0.3 6 Open drain Y
LM2903V Voltage enhanced 2 2.0 32 0.5 7 0.3 6 Open drain Y
LM2903AV Voltage enhanced, reduced V
IO
2 2.0 32 0.5 2 0.3 6 Open drain Y
LM2901 General purpose 4 2.0 30 0.625 7 0.3 6 Open drain Y
LP2901 General purpose, low power 4 3.0 30 0.5 5 1.3 6 Open drain Y
LM239A General purpose 4 2.0 30 0.5 2.5 0.3 6 Open drain Y
LM2903 General purpose 2 2.0 30 0.5 7 0.3 6 Open drain Y
TLC370x Fast, low power 2, 4 4.0 16 0.02 5 1.1 4 Push pull Y
TLC393 General purpose, low power 2 4.0 16 0.02 5 1.1 6 Open drain Y
TLV370x Nanopower, push-pull, RRIO 1, 2, 4 2.5 16 0.0008 5 36 Push pull Y
1
x indicates: 0 = single with shutdown, 1 = single, 2 = dual, 3 = dual with shutdown, 4 = quad, 5 = quad with shutdown. y indicates: no character = single, 2 = dual, 3 = triple, 4 = quad.
Automotive Selection Guide Texas Instruments 3Q 2009
Power Management
Low-Dropout Regulators (LDOs)
8

Dual-Output LDOs Selection Guide

Device Description
I01
(mA)
I02
(mA)
VD01
at I01
(mV)
VD02
at
I02
(mV)
Iq
at
I0
(A)
Voltage
(V)
Accuracy
(%)
V0
(min)
(V)
V0
(max)
(V)
Features
Auto
Qual
(Q1) /EN SVS Seq
Low
Noise
VIN
(min)
(V)
VIN
(max)
(V)
TPS767D3xx Dual-output, fast LDO
with integrated SVS
1000 1000 350 125 3.3/2.5,
3.3/1.8,
3.3/Adj
2 1.2 5 4 4 2.7 10 Y
TPS70175 Dual-output LDO
with power-up
sequencing for split-
voltage DSP systems
500 250 170 190 2.5/5.0 2 4 4 4 4 2.7 6 Y
High Voltage LDO
TPS798xx-Q1
Getsamplesanddatasheetsat:www.ti.com/sc/device/TPS79801-Q1 or www.ti.com/sc/device/TPS79850-Q1
Key Features
Wide-inputvoltagerange:3Vto80V
Low-quiescentcurrent:40A(Typ)
Low-dropoutvoltage:300mV(Typ)
Outputcurrent:50mA
Adjustableoutputfrom1.26Vto28V
Packaging:MSOP-8,PowerPAD
Standard Linear Voltage Regulators Selection Guide
Device
V0UT
(nom)
(V)
V0UT/ VREF
Tolerance
Over Temp.
(%)
I0UT
(max)
(mA)
Min I0UT
for
Regulation
(mA)
Iq
(max)
(mA)
VD0
(typ)
(V)
VD0
(max)
(V)
VIN
(max)
(V)
VIN-VOUT
(max)
(V)
Auto
Qual
(Q1)
LM317M Adj. (1.2 to 37) 0.7 500 3.5 3 40 Y
UA78Mxx 3.3, 5, 10 5 500 6 2 2 to 2.5 25 to 30 Y
The TPS798xx is the first device in a line of 80-V high-voltage micropower low-dropout
(LDO) linear regulators This device is capable of supplying 50-mA output current with a
dropout voltage of only 300mV Designed for low quiescent current high voltage (80V)
applications,40Aoperatingand1AinshutdownmakestheTPS798xxanidealchoicefor
battery-powered or high-voltage systems

Thermal
Shutdown
Current
Limit
Bandgap
GND
OUT
SENSE
IN
EN
Internal
Supply
TPS798xx-Q1 fxed voltage output functional block diagram.
Texas Instruments 3Q 2009 Automotive Selection Guide
Power Management
Low-Dropout Regulators (LDOs)
9

1
V = wide voltage, LD = load dump, PG = power good, /EN = active high enable, SVS = supply voltage supervisor, RST = reset.
LDOs Selection Guide
Device Description
I0
(mA)
VD0
at I0
(typ)
(mV)
Iq at I0
Full Load
(A)
Voltage
(V) Adj.
VIN
(min)
(V)
VIN
(max)
(V)
Accuracy
(%) Features
1
Package(s)
Auto
Qual
(Q1)
TPS797xx Low-quiescent current 10 110 5 1.8, 3, 3.3 1.8 5.5 5, 4, 4 PG SC-70 Y
TPS715xx Low-quiescent current 50 415 3.2 2.5, 3, 3.3, 5 2.5 24 4 SC-70 Y
TPS770xx Low-quiescent current 50 48 17 1.2, 1.5, 1,8, 2.5,
2.7, 2.8, 3, 3.3, 5
4 2.7 10 3 /EN SOT-23 Y
TPS798xx Wide Input V range,
low-quiescent current
50 300 40 5, Adj. 4 3 80 1.5 /EN MSOP Y
TPS769xx Low cost 100 70 17 1.2, 1.5, 1.8, 2.5,
2.7, 2.8, 3, 3.3, 5
4 2.7 10 3 /EN SOT-23 Y
TPS791xx RF low noise; high PSRR 100 38 170 1.8, 3.3, 4.7 4 2.7 5.5 2 /EN SOT-23 Y
TPS763xx Low cost 150 300 85 1.6, 1.8, 2.5, 2.7,
2.8, 3, 3.3, 3.8, 5
4 2.7 10 3 /EN SOT-23 Y
TPS765xx Low-quiescent current 150 85 33 1.5, 1.8, 2.5, 2.7,
2.8, 3, 3.3, 5, Adj.
4 2.7 10 3 /EN SO-8 Y
TPS771xx Fast transient response 150 265 125 1.5, 1.8, 2.7,
2.8, 3.3, 5
4 2.7 10 2 PG, /EN MSOP Y
TPS793xx RF low noise, high PSRR 200 100 170 1.8, 2.5, 2.8,
2.85, 3, 3.3, 4.75
4 2.7 5.5 2 EN SOT-23,
MSOP,
SOT-223
Y
TPS799xx High PSRR 200 100 40 1.2 to 6 4 2.7 6.5 2 /EN SOT-23 Y
TPS732xx Reverse current protection,
cap free
250 40 400 1.2, 1.5, 1.6, 1.8,
2.5, 3, 3.3, 5
4 1.7 5.5 1 /EN SOT-23 Y
TLE4275 Automotive LDO 450 500 150 5 5.5 45 2 V, LD, RST DDPAK Y
TL760Mxx Automotive LDO, TLE4274
alternative
500 500 1.8, 2.5, 3.3 3 45 2 V, LD DDPAK Y
TPS71Hxx Fast transient response 500 150 285 3.3, 4.85, 5 4 4.3 10 2 PG PWP Y
TPS775xx Fast transient response 500 169 85 1.5, 1.6, 1.8,
2.5, 3.3
4 2.7 10 2 SVS SO-8, PWP Y
TPS776xx Fast transient response 500 169 85 1.5, 1.8, 2.5,
2.8, 3.3, Adj.
4 2.7 10 2 PG SO-8, PWP Y
TL720Mxx Reverse polarity protection 450 500 5 5.5 42 2 V TO263,
TO252
Y
TL750Mxx Automotive LDO, TLE4275
alternative
750 600 5, 8, 12 6, 9, 13 60 3 V, LD DDPAK Y
TL751Mxx Automotive LDO 750 600 5, 8, 12 6, 9, 13 60 3 V, LD, /EN DDPAK Y
TPS737xx Reverse current protection 1000 130 300 1.9, 3.3 2.2 5.5 3 /EN SO Y
TPS767xx Fast transient response 1000 230 85 1.5, 1.8, 2.5, 2.7,
2.8, 3, 3.3, 5
4 2.7 10 2 SVS SO-8, PWP Y
TPS768xx Fast transient response 1000 230 85 1.5, 1.8, 2.5, 2.7,
2.8, 3, 3.3, 5, Adj.
4 2.7 10 2 PG SO-8, PWP Y
TPS753xx Fast transient response 1500 160 75 1.5, 1.8, 2.5, 3.3 4 2.7 5 2 /EN, SVS PWP Y
TPS752xx Fast transient response 2000 210 75 1.5, 1.8, 2.5, 3.3, Adj. 4 2.7 5 2 /EN, SVS PWP Y
TPS798xx-Q1 fxed voltage output functional block diagram.
Automotive Selection Guide Texas Instruments 3Q 2009
Power Management
DC/DC Controllers and Converters
10

10

10

10

Switching DC/DC Converters Selection Guide

Device Description VIN (V) V0 (max) (V) V0 (min) (V) VREF Tol (%) Driver Current (A) Auto Qual (Q1)
TPS54362 Buck mode 3.6 to 60 18 0.9 1.5 3 Y
MC33063A 1.5A peak boost/buck/inverting switching regulator 3 to 40 40 1.25 2 1.5 Y
TPIC74100 Buck/boost switch-mode regulator 1.5 to 40 5 5 2 1 Y
TPS55065 Buck/boost switch-mode regulator 1.5 to 40 5 5 2 0.5 Y
TPS61040 Boost mode, LED driver 1.8 to 6.0 28 V
IN
0.09 Y
TPS61041 Boost mode 1.8 to 6.0 28 V
IN
0.05 Y
1
Current levels of this magnitude and beyond can be supported.
2
OCP = over-current protection; UVLO = under-voltage lockout; SCP = short-circuit protection; PG = power good; OVP = over-voltage protection.
Buck-Converter
TPS54362-Q1
Getsamplesanddatasheetsat:www.ti.com/sc/device/TPS54362-Q1
Key Features
Wide-inputvoltagerangeupto60V
High-switchingfrequencyupto2.2MHz
Ultra-lowquiescentcurrentof65A
Integratedvoltagesupervisor
Smallerlow-capacityoutputfilters
Switching DC/DC Controllers Selection Guide
Device Description
VIN
(V)
V0 (max)
(V)
V0 (min)
(V)
VREF Tol
(%)
Driver
Current
(A)
Output
Current (A)
1
Multiple
Outputs Protection
2
Auto
Qual
(Q1)
TPS40050 Wide input range sync buck, source only 8 to 40 30 0.7 1 1 20 No OCP, UVLO Y
TPS40051 Wide input range sync buck, source/sink except SS 8 to 40 30 0.7 1 1 20 No OCP, UVLO Y
TPS40053 Wide input range sync buck, source/sink 8 to 40 30 0.7 1 1 20 No OCP, UVLO Y
TPS40057 Wide input range sync buck, source/sink with prebias 8 to 40 35 0.7 1 1 20 No SCP, UVLO Y
TPS40090 Multiphase, current mode, programmable switching buck 4.5 to 15 3.3 0.7 1 120 No PG Y
TPS5130 Triple synchronous buck controller with LDO controller 4.5 to 28 8.5 0.9 1.5 1.2 Yes OCP, UVLO, PG, OVP Y
TPS5120 Dual 180 degree out-of-phase operation 4.5 to 28 5.5 0.9 1.5 1.5 15 (each) Yes OCP, UVLO, PG, OVP Y
TPS40200 Wide input, non-synchronous buck DC/DC controller 4.5 to 52 46 0.7 2 0.2 Depends on
FET driver
No Y
TPS40210/11 Wide input, current-mode, boost 4.5 to 52 9 7 1 0.4 6 No OCP Y
TL1451A Dual PWM buck/boost 3.6 to 50 50 2.5 4 0.02 Depends on
FET driver
Yes UVLO, SCP Y
TL5001A PWM buck/boost 3.6 to 40 50 1 3 0.02 Depends on
FET driver
No UVLO, SCP Y
Power Management Multi-Channel IC (PMIC) Solutions Selection Guide
Device Description VIN (V)
# DC-DC
Converters # LDOs
Driver Current
(A)
LDO IO
(mA) Auto Qual (Q1)
6-channel power management IC with 3DC/DCs, 3 LDOs, I
2
C
interface and DVS, optimized for DaVinci
TM
DSPs
2.5
to 6
3 3 1.0, 1.2, 1.5 1x30, 2x200 Y
CB
EN
FB
RST
R
SLEW
V
SWD
V
IN
LPM
SYNC
C
DLY
V
REG
V
SUPPLY
V
REG
R
OSC
L
V
SWS
C
SS
ERR
RST_TH
OV_TH
V
REG
TPS54362
The TPS54362-Q1 is an automotive-
qualified DC/DC step-down converter
that offers a leading combination of high
voltage up to 60V, a switching frequency
up to 22MHz and ultra-low quiescent
currentof65Ainasmall,monolithic
package The TPS54362-Q1 converts
an unregulated input voltage to a
fixed lower output voltage to power
automotive applications,
such as infotainment,
navigation systems
and power supply for
electronic control units
The TPS54362-Q1 allows designers
to reduce overall solution size, cost
and
design complexity
when compared to
discrete solutions
Texas Instruments 3Q 2009 Automotive Selection Guide
Power Management
DC/DC Controllers and Converters
11

SWIFT
TM
Step-Down Converters Selection Guide
Device VIN (V) Output Current (A) V0UT (V) Package Auto Qual (Q1)
TPS62000/1/2/3/4/5/6/7/8 2.0 to 5.5 0.6 Adj., 0.9, 1.0, 1.2, 1.5, 1.8, 1.9, 2.5, 3.3 10/MSOP Y
TPS54110 3.0 to 6.0 1.5 0.9 to 4.5 20/HTSSOP Y
TPS5420 5.5 to 36 2 Adj. 8/SO Y
TPS5430 5.5 to 36 3 Adj. 8/HSO Y
TPS54310/1/2/3/4/5/6 3.0 to 6.0 3 Adj., 0.9, 1.2, 1.5, 1.8, 2.5, 3.3 20/HTSSOP Y
TPS54380 3.0 to 6.0 3 0.9 to 4.5 20/HTSSOP Y
TPS5450 5.5 to 36 5 Adj. 8/HSO Y
TPS54372 3.0 to 6.0 6 0.2 to 4.5 20/HTSSOP Y
TPS54610/1/2/3/4/5/6 3.0 to 6.0 6 Adj., 0.9, 1.2, 1.5, 1.8, 2.5, 3.3 28/HTSSOP Y
TPS54680 3.0 to 6 6 0.9 to 4.5 28/HTSSOP Y
Inductorless DC/DC Regulators (Charge Pumps) Selection Guide
Device IOUT (mA)
VIN
(V)
VOUT Adj.
(V)
Effciency
(%)
Switching Frequency
(max) (kHz)
Quiescent Current
(typ) (A)
Auto Qual
(Q1)
TPS60400 60 1.6 to 5.5 (1.6 to 5.5) 99 375 125 Y
TPS60401 60 1.6 to 5.5 (1.6 to 5.5) 99 30 65 Y
TPS60402 60 1.6 to 5.5 (1.6 to 5.5) 99 75 120 Y
TPS60403 60 1.8 to 5.25 (1.8 to 5.25) 90 325 425 Y
LCD/LED Display Bias Solutions Selection Guide
Device
VIN
(min)
(V)
VIN
(max)
(V)
No. of
Regulated
Outputs
Minimum Switch
Current Limit
(A) LDO
DC/DC
Converter
Charge
Pump
Operating
Temp Range
(C) Package
Auto Qual
(Q1)
TPS65100 2.7 6.0 4 2.3 1 1 2 40 to 125 24/HTSSOP Y
TPS65140 2.7 5.8 4 1.6 1 1 2 40 to 85 24/HTSSOP Y
TPS65145 2.7 5.8 4 0.96 1 1 2 40 to 85 24/HTSSOP Y
Automotive Selection Guide Texas Instruments 3Q 2009
Power Management
LED Drivers
12

12

12

12

1
May be via ENABLE pin, CONTROL pin, analog feedback network or programmable per serial interface.
2
SS = soft start; UVLO = under-voltage lockout; OC = over current; OT = over temperature; IL = current limit.
16-Channel Constant-Current Sink, LED Driver
TLC5941-Q1
Getsamplesanddatasheetsat:www.ti.com/sc/device/TLC5941-Q1
Key Features
16channels
12-bit(4096steps)grayscale
PWM control
Dotcorrection6-bit(64steps)
Drivecapability(constant-current
sink) 0mA to 80mA
LEDpowersupplyvoltageupto17V
V
CC
= 30V to 55V
30-MHzdata
transfer rate
The TLC5941 is a 16-channel, constant-current sink, LED driver Each channel has an
individuallyadjustable4096-stepgrayscalePWMbrightnesscontrolanda64-step
constant-current sink (dot correction)
LED Drivers Selection Guide
Device Description
VIN
(V) Type
V0UT
(max)
(V)
LED
Confguration
No. of
Channels
Max
Current
(mA)

Dimming
1
Serial
Interface Diagnostics
2
Protection
2
Package(s)
Auto
Qual
(Q1)
TPS61040 DC/DC boost converter
for white LEDs
1.8 to 6.0 Inductive 28 Series 1 400 Y N SS, UVLO SOT-23 Y
TPS61041 DC/DC boost converter
for white LEDs
1.8 to 6.0 Inductive 28 Series 1 250 Y N SS, UVLO SOT-23 Y
TPIC6C595/6 Power logic
multichannel switch
4.5 to 5.5 Switch 33 Parallel 8 250 Y Y OC 16/TSSOP,
16/SO
Y
TPIC2810 Power logic
multichannel switch
3.0 to 5.5 Switch 40 Parallel 8 210 Y Y OT, IL 16/SO Y
TLC5916 Linear multichannel
constant current sink
3.0 to 5.5 Linear 20 Parallel 8 120 Y Y OL, OT OT 16/TSSOP,
16/SO
Y
TLC5917 Linear multichannel
constant current sink
3.0 to 5.5 Linear 20 Parallel 8 120 Y Y OL, OT, SC OT 16/TSSOP,
16/SO
Y
TLC5941 Linear multichannel
constant current sink,
DC, GS
3.0 to 5.5 Linear 18 Parallel 16 90 Y Y OL, OT OT 28/HTSSOP Y

Delay
x0
Constant-Current
Driver
Temperature
(TEF)
Delay
x1
Constant-Current
Driver
Delay
x15
Constant-Current
Driver
OUT0
OUT1
OUT15
SOUT
SIN SCLK
IREF
XLAT
GSCLK
BLANK
GND V
CC
MODE
MODE
11 0
5
MODE
0
192
96
0 1
0 1
0 1
CNT
CNT
CNT
CNT
96
96
192
V
REF
=1.24 V
XERR
GS Register
DC Register
Error Flag
Input
Shift
Register
96
191
Detection
(LOD)
LED Open
Status
Information:
LOD,
0
191
DC Data
TED,
Current
Max. OUTn
GS Counter
Input
Shift
Register
0
95
23 12
95 90
6 11
GS Register
DC Register
DC Register
191 180
GS Register 12-Bit Grayscale
PWM Control
LED Open Detection
LED Open Detection
6-Bit Dot Correction
6-Bit Dot Correction
12-Bit Grayscale
PWM Control
LED Open Detection
6-Bit Dot Correction
12-Bit Grayscale
PWM Control
TLC5941-Q1 block diagram.
Texas Instruments 3Q 2009 Automotive Selection Guide
Power Management
PWM Power Supply Controllers/USB Power Switches
13

PWM Power Supply Controllers Selection Guide

Device
1
Typical
Power
Level
(W)
Max
Practical
Frequency
Start-
Up
Current
Operating
Current
Supply
Voltage
(V)
UVLO:
On/Off
(V)
VREF
(V)
VREF
Tol.
(%)
Max
Duty
Cycle
(%)
Soft
Start E/A Shutdown
Output
Voltage
Feed-
Forward
Leading
Edge
Blanking
Auto Qual
(Q1)
Peak Current Mode Controllers
UCC2800 10 to 200 1MHz 100A 500A 7.2 to 15 7.2/6.9 5 1.5 100 Yes Yes No No 100 ns Y
UCC2801 10 to 200 1MHz 100A 500A 9.4 to 15 9.4/7.4 5 1.5 50 Yes Yes No No 100 ns Y
UCC2802 10 to 200 1MHz 100A 500A 12.5 to 15 12.5/8.3 5 1.5 100 Yes Yes No No 100 ns Y
UCC2803 10 to 200 1MHz 100A 500A 4.1 to 15 4.1/3.6 4 1.5 100 Yes Yes No No 100 ns Y
UCC2804 10 to 200 1MHz 100A 500A 12.5 to 15 12.5/8.3 5 1.5 50 Yes Yes No No 100 ns Y
UCC2805 10 to 200 1MHz 100A 500A 4.1 to 15 4.1/3.6 4 1.5 50 Yes Yes No No 100 ns Y
UCC2808A-1/A-2 50 to 500 1MHz 130A 1mA 4.3 to 15 12.5/8.34/4.1 Prog Yes Yes No No No Y
UCC2813-0 10 to 200 1MHz 100A 500A 7.2 to 15 7.2/6.9 5 1.5 100 Yes Yes No No 100 ns Y
UCC2813-1 11 to 200 1MHz 100A 500A 9.4 to 15 9.4/7.4 5 1.5 50 Yes Yes No No 100 ns Y
UCC2813-2 12 to 200 1MHz 100A 500A 12.5 to 15 12.5/8.3 5 1.5 100 Yes Yes No No 100 ns Y
UCC2813-3 13 to 200 1MHz 100A 500A 4.1 to 15 4.1/3.6 4 1.5 100 Yes Yes No No 100 ns Y
UCC2813-4 14 to 200 1MHz 100A 500A 12.5 to 15 12.5/8.3 5 1.5 100 Yes Yes No No 100 ns Y
UCC2813-5 15 to 200 1MHz 100A 500A 4.1 to 15 4.1/3.6 4 1.5 100 Yes Yes No No 100 ns Y
UCC2895 1MHz 150A 5mA 9 to 17 11/9 5 1.2 100 Yes Yes No No No Y
UCC28220 2MHz 200A 3.5mA 8 to 14.5 10/8 90 Yes No No No No Y
UC2825A 1MHz 100A 22 16/10 5 1 50 Yes Yes No No Yes Y
UC2842A 30 to 350 500kHz 0.3mA 11mA 10 to 30 16/10 5 1.5 100 No Yes No Yes No N
UC2843A 30 to 350 500kHz 0.mA 11mA 7.8 to 30 8.5/7.9 5 1.5 100 No Yes No Yes No Y
UC2844A 30 to 350 500kHz 0.3mA 11mA 10 to 30 16/10 5 1.5 50 No Yes No Yes No N
UC2845A 30 to 350 500kHz 0.3mA 11mA 7.8 to 30 8.5/7.9 5 1.5 50 No Yes No Yes No N
UC2856 1MHz 18mA 7.7 to 40 7.7 5 1 50 Yes Yes Yes No No Y
USB Transient Voltage Suppressor Selection Guide
Device
Supply
Voltage
(V)
Number of
USB
Ports
Peak Power
Dissipation
(W)
Stand-Off
Voltage (min)
(V)
Operating
Temp Range
(C) Package
Auto Qual
(Q1)
SN65220
1
3.3 1 60 6 40 to 85 6/SOT-23 Y
USB Power Switches Selection Guide
Device
VIN
(min)
(V)
VIN
(max)
(V)
rDS(on) per
FET(typ)
(m) Package
Operating
Temp Range
(C)
Continuous
Current (max)
(A)
Current Limit
(typ)
(A)
Number of
Switches Enable
Auto Qual
(Q1)
TPS2021 2.7 5.5 33 8/SO 40 to 85 0.6 0.9 1 Low Y
TPS2022 2.7 5.5 33 8/SO 40 to 85 1 1.5 1 Low Y
TPS2024 2.7 5.5 33 8/SO 40 to 85 2 3 1 Low Y
TPS2030 2.7 5.5 33 8/SO 40 to 85 0.2 0.3 1 High Y
TPS2042B 2.7 5.5 70 8/SO 40 to 125 0.5 1 2 Low Y
TPS2051B 2.7 5.5 70 8/SO 40 to 125 0.5 1 1 High Y
TPS2551 2.5 6.5 85 8/SOT-23 40 to 125 1.1 Adj. to 1.1 1 Yes Y
1
The extra C in UCC means BiCMOS technology; therefore, UC2842 is bipolar and UCC2800 is BiCMOS.
1
USB 1.1 compatible.
Automotive Selection Guide Texas Instruments 3Q 2009
Power Management
Supervisors/References
14

14

14

14

Supervisors Selection Guide

Device
Number of
Supervisors
Supervised
Voltages
IDO
(typ)
(A)
Time
Delay
(ms)
Manual
Reset
Input/MR
Active-High
Reset Output
Watchdog
Timer
WDI
Package
Auto
Qual
(Q1)
TLC77xx 1 Adj./2.5/3.3/5.0 9 Prog
4 8/TSSOP Y
TPS3306 2 1.5/1.8/2.0/2.5/3.3 15 100
4 8/SO Y
TPS3307 3 1.8/2.5/3.3 40 200 4
4 8/SO Y
TPS3803 1 Adj./1.5 3 0.0055 4
5/SC-70 Y
TPS3805 2 Adj./3.3 3 0.0055 4
5/SC-70 Y
TPS3808 1 Adj./1.2/1.8/3.0/3.3/5.0 3 Prog 4
SOT-23 Y
TPS3809 1 2.5/3.0/3.3/5.0 9 200
3/SOT-23 Y
TPS3813 1 2.25/2.64/2.93/3.3/4.55 9 25
4 4 6/SOT-23 Y
TPS3820/8-xx 1 3.3/5.0 15 25/200 4
4 5/SOT-23 Y
TPS3823 1 2.5/3.0/3.3/5.0 15 200 4
4 5/SOT-23 Y
TPS3824-xx 1 2.5/3.0/3.3/5.0 15 200
4 4 5/SOT-23 Y
TPS3825-xx 1 3.3/5.0 15 200 4
4 5/SOT-23 Y
TPS3836/8 1 1.8/2.5/3.0/3.3 0.25 10/200 4
4 5/SOT-23 Y
TPS3837 1 1.8/2.5/3.0/3.3 0.25 10/200 4
5/SOT-23 Y
UCC2946 1 Adj. 12 Prog 4
4 8/TSSOP Y

References Selection Guide
Device
V0
(V)
Initial Accuracy
at 25C
(%)
Temp Coeff
(max)
(ppm/C)
I0UT/IZ
(max)
(mA)
Iq
(max)
(A)
V1
(min)
(V)

V1
(max)
(V)
Operating
Temp Range
(C) Package(s)
Auto
Qual
(Q1)
Low-Noise, Very Low-Drift, Precision Series Voltage References
REF5020A 2.048 0.01 8 10 1000 2.7
18 40 to 125 8/SO Y
REF5025A 2.5 0.01 8 10 1000 2.7
18 40 to 125 8/SO Y
REF5045A 4.5 0.01 8 10 1000 4.7
18 40 to 125 8/SO Y
TL1431 2.5 to 36 0.4 100 2 2.49
2.51 40 to 125 8/SO Y
TL431A 2.5 to 36 1 0.5 2.47
2.52 40 to 125 3/SOT-23,
5/SOT-23
Y
TL431B 2.5 to 36 0.5 0.5 2.48
2.51 40 to 125 3/SOT-23 Y
TL432A 2.5 to 36 1 100 0.5 2.47
2.52 40 to 125 SOT-23-3 Y
TL432B 2.5 to 36 0.5 100 0.5 2.48
2.51 40 to 125 SOT-23-3 Y
TL4050B 2.048 to 10 0.2 50 15
40 to 125 5/SC70 Y
TL4050C 2.048 to 10 0.5 50 15
40 to 125 SOT-23-3 Y
TLV431B 1.24 to 6 0.5 15
40 to 125 SOT-23-3,
SOT-23-5
Y
All devices feature an Active-Low Reset Output, except TPS3837.
Battery Management Selection Guide
Device
#
Series
Cells
Charge
Current
(max)
(A)
Charge
Status
Outputs
Control
Topology
VIN (max)
(V)
Battery
Charge
Volt
(V)

Operating
Temp Range
(C)
Package
Auto
Qual
(Q1)
Low-Noise, Very Low-Drift, Precision Series Voltage References
bq24030 1 1.5 2 Linear 18 4.2
40 to 85 QFN-20 Y
bq24031 1 1.5 2 Linear 18 4.1
40 to 85 QFN-20 Y
Texas Instruments 3Q 2009 Automotive Selection Guide
Power Management
Power and Control
15

Peripheral Drivers and Actuators Selection Guide

Device Description
Output
Voltage
(max) (V)
Switching
Voltage
(V)
Peak Output
Current
(mA)
Drivers
per
Package
Input
Compatibility
Delay Time
Compatibility
(typ) (ns)
Operating
Temp Range
(C) Package
Auto Qual
(Q1)
ULQ2003A High-voltage, high-current
darlington transistor array
50 50 500 7 CMOS, TTL 1000 40 to 125 16/SO Y
ULQ2004A High-voltage, high-current
darlington transistor array
50 50 500 7 CMOS 1000 40 to 105 16/SO Y
1
Fault protection and diagnosis.
2
Fault protection.
Power and Logic: 8-Bit Devices Selection Guide
Device Description VDS (max) (V) ICC (typ) (A)
IO
(A)
IPEAK
(A)
rDS (on) (typ)
(W)
EAS (max)
(mJ)
tPLH (typ)
(ns)
ESD (max)
(kV) Package(s)
TPIC6259 Addressable latch 45 15 0.25 0.75 1.3 75 625 3 20/SO (DW), 20/PDIP (N)
TPIC6273 D-type latch 45 15 0.25 0.75 1.3 75 625 3 20/SO (DW), 20/PDIP (N)
TPIC6595 Shift register 45 15 0.25 0.75 1.3 75 650 3 20/SO (DW), 20/PDIP (N)
TPIC6596 Shift register 45 15 0.25 0.75 1.3 75 650 3 20/SO (DW), 20/PDIP (N)
TPIC6A259
1
Addressable latch 50 500 0.35 1.1 1 75 125 2.5 24/SO (DW), 20/PDIP (NE)
TPIC6A595
1
Shift register 50 500 0.35 1.1 1 75 125 2.5 24/SO (DW), 20/PDIP (NE)
TPIC6B259
2
Addressable latch 50 20 0.15 0.5 5 30 150 2.5 20/SO (DW), 20/PDIP (N)
TPIC6B273
2
D-type latch 50 20 0.15 0.5 5 30 150 2.5 20/SO (DW), 20/PDIP (N)
TPIC6B595
2
Shift register 50 20 0.15 0.5 5 30 150 2.5 20/SO (DW), 20/PDIP (N)
TPIC6B596
2
Shift register 50 20 0.15 0.5 5 30 150 2.5 20/SO (DW), 20/PDIP (N)
TPIC6C595
2
Sift register 33 20 0.1 0.25 7 30 80 2.5 16/SO (D), 16/PDIP (N),
16/TSSOP (PW)
TPIC6C596
2
Shift register 33 20 0.1 0.25 7 30 80 2.5 16/SO (D), 16/PDIP (N),
16/TSSOP (PW)
TPIC2810
2
Shift register 40 620 0.1 0.21 5 1150 3 16/SO (D)
Device Description VCC Range (V) VIT (HL) Range (mA) I(LGX/UGX) (typ) (mA) fPWM (typ) (kHz) fOSC/ fOSC1 (max) (MHz) Package
TPIC43T01
2
Three-phase DC brushless motor RPM controller 18 to 28 4 to 12 10 22.7 10/10 38/TSSOP (DA)
TPIC43T02
2
Three-phase DC brushless motor RPM controller 18 to 28 4 to 12 10 22.7 10/10 38/TSSOP (DA)

Device Description VBAT Range (V) VGATE Range (V)
IBAT (typ) (mA) fSCLK (max) (mHz)
Package
TPIC44H01
1
4-channel serial/parallel high-side FET pre-driver 8 to 24
V
BAT
+4 to V
BAT
+18
4 5
38/TSSOP (DA)
TPIC44LO1
1
4-channel serial/parallel low-side FET pre-driver 8 to 24
7 to 13.5
0.5 10
24/SSOP (DB)
TPIC44LO2
1
4-channel serial/parallel low-side FET pre-driver 8 to 24
7 to 13.5
0.5 10
24/SSOP (DB)
TPIC44L03
1
4-channel serial/parallel low-side FET pre-driver 8 to 24
7 to 13.5
0.5 10
24/SSOP (DB)
TPIC46L01
1
6-channel serial/parallel low-side FET pre-driver 8 to 24
7 to 13.5
0.5 10
24/SSOP (DB)
TPIC46L02
1
6-channel serial/parallel low-side FET pre-driver 8 to 24
7 to 13.5
0.5 10
24/SSOP (DB)
TPIC46L03
1
6-channel serial/parallel low-side FET pre-driver 8 to 24
7 to 13.5
0.5 10
24/SSOP (DB)
1
Fault protection and diagnosis.
2
Fault protection.
Mixed-Signal Power + Control Selection Guide
Device Description
VBAT Range
(V)
VOS (max)
(V)
ID/ IPEAK
(A)
rDS (on) (typ)
(W)
Freq
(kHz) Package(s)
TPIC2603
1
6-channel serial interface low-side controller 5.5 to 25 68 0.35/2.25 0.7 4000 20/PDIP (NE), 24/SO (DW)

MOSFET Drivers Selection Guide
Device Description
No.
Outputs
Driver
Confg.
V
CC
(min) (V)
V
CC
(max) (V)
Peak Output
Current (A)
Prop
Delay (ns)
Operating Temp
Range (C) Package
Auto Qual
(Q1)
UCC2720x 120-V boot, 3-A peak, high frequency,
high-side/low-side driver
2 Non-inverting 8 20 3 20 40 to 125 HSO-8 Y
UCC27324 Dual 4-A high-speed low-side power
MOSFET driver
2 Non-inverting 4 15 4 35 40 to 125 SO-8 Y
UCC27423 Dual 4-A high-speed low-side MOSFET
drivers with enable
2 Inverting 4 15 4 35 40 to 125 SO-8 Y
UCC27424 Dual 4-A high-speed low-side MOSFET
drivers with enable
2 Non-inverting 4 15 4 35 40 to 125 SO-8 Y
Key Features
Meetsorexceedstherequirements
of ISO 11898-5
GIFT/ICTcompliant
ESDprotectionimproved:


12kV (HBM) on bus pins

System level (IBEE Zwickau

IEC61000-4-2):10kV
Withstandsvoltagetransients
according to ISO7637
Low-currentstandbymodewith
wake-up, 5A typical
Bus-faultprotectionof27Vto40V
TXDdominanttimeoutprotection
Thermalshutdownprotection
Power-up/downglitch-freebus
inputs and outputs
HighinputimpedancewithlowV
CC
Monotonicoutputsduring
power cycling
DigitalInputs3.3Vcompatible
(TXD,STB)
Enhancedforvoltagetransientscaused
by common-mode choke during bus
short-circuit events
Improveddropinreplacementforthe
TJA1040

Automotive Selection Guide Texas Instruments 3Q 2009
Interface
CAN/LIN
16

16

16

16

16

CAN/LIN Selection Guide

Device
CAN/LIN
Physical
Layer
Standard
Maximum
Signaling
Rate
Supply
Voltage
(V)
Maximum
Junction
Temp
TJ (C)
HBM
Bus Pin
ESD
(kV)
Maximum
Loop
Delay
(ns)
Bus Pin
Standoff
Voltage (V)
Bus
Wake-
Up
Typical ICC
in Low-Power
Mode
(A)
Package
Auto
Qual
(Q1)
SN65HVD1040A-Q1 ISO-11898-5 1Mbps
5
150 12 230
27 to +40 Y 6 8/SO (D) Y
SN65HVD1050A-Q1 ISO-11898-2 1Mbps
5
150 12 230
27 to +40 N/A N/A 8/SO (D) Y
SN65HVD251-Q1 ISO-11898-2 1Mbps
5
150 9 150
36 N 190 8/SO (D) Y
SN65HVD230Q-Q1 ISO-11898-2 1Mbps
3.3
150 15 135
2 to +7 Y 370 8/SO (D) Y
SN65HVD231Q-Q1 ISO-11898-2 1Mbps
3.3
150 15 135
2 to +7 N 0.1 8/SO (D) Y
SN65HVD232Q-Q1 ISO-11898-2 1Mbps
3.3
150 15 135
2 to +7 N/A N/A 8/SO (D) Y
TPIC1021A LIN 2.0 / 2.1 20kbps
V
BAT
150 12 N/A
40 to +40 Y 20 8/SO (D) Y
High speed CAN transceiver
SN65HVD1040A-Q1
Getsamplesanddatasheetsat:www.ti.com/sc/device/SN65HVD1040A-Q1
V
CC
V
CC
RXD
CANH
SPLIT
CANL
TXD
STB
V
IN
V
OUT
5 V
Low IQ*
LDO
5 V C
1040A-Q1 XVR
GND
GND
V
BATTERY
SPLIT
CANL
CANH
STB
RXD
V
CC
GND
TXD
x2*
x2* = Low-power wake-up receiver
5-V system with 1040A-Q1 type transceiver
normal and low-power standby (with CAN wake) modes.
_
+
+
_
OSC
+
PWM
BIAS POR
Filter
Pulse Width
Demodulation
Carrier Detect
Input
+
Filter
Data MUX
AC Detect
3-State
Output Buffer
IN
Isolation Barrier
DC Channel
AC Channel
OUT
V
ref
POR
_
+
+
_
V
ref
Texas Instruments 3Q 2009 Automotive Selection Guide
Interface
LVDS, MLVDS, RS-485/422/232
17

Voltage Level Translation - Dual Supply Selection Guide

Device
VCCA
Range (V)
VCCB
Range (V)
No. of
Bits
Signaling
Rate (max)
(Mbps)
ESDA
(kV)
ESDB
(kV)
Operating
Temp Range
(C) Package
Auto
Qual
(Q1)
TXB0104 1.2 to 3.6 1.65 to 5.5 4 100 2.5 15 40 to 125 QFN-14 Y
SN74AVC8T245 1.2 to 3.6 1.2 to 3.6 8 320 8 8 40 to 125 TVSOP-24 Y
SN74AVC16T245 1.2 to 3.6 1.2 to 3.6 16 380 8 8 40 to 125 TVSOP-48 Y
Digital Isolators Selection Guide
Device
No. of
Channels
Channel
Confguration
Insulation
Rating
(V
RMS
)
Supply
Voltage
(V)
Data Rate
(Mbps)
ESD
(kV)
Operating
Temp Range
(C) Package
Auto
Qual
(Q1)
ISO721-Q1 1 1/0 2500 3.3, 5.0 100 4 40 to 125 8/SO Y
ISO722x-Q1 2 2/0, 1/1 2500 3.3, 5.0 1, 5, 25 4 40 to 125 8/SO Y
ISO724x-Q1 4 4/0, 3/1, 2/2 2500 3.3, 5.0 1, 25 4 40 to 125 16/SO Y
Key Features
4000-V(peak)isolation

o
UL 1577, IEC 60747-5-2
(VDE 0884,rev 2), IEC 61010-1

o
50-kV/s transient immunity (typ)
Signalingrate0Mbpsto150Mbps

o
Low propagation delay

o
Low pulse skew
(pulse-width distortion)
Low-powersleepmode
Highelectromagneticimmunity
Low-inputcurrentrequirement
Drop-inreplacementformostoptical
and magnetic isolators
Digital Isolator
ISO721-Q1
Getsamplesanddatasheetsat:www.ti.com/sc/device/ISO721-Q1
The ISO721 is a digital isolator with a logic input and output buffer separated by a silicon
oxide (SiO2) insulation barrier This barrier provides galvanic isolation of up to 4000V Used
inconjunctionwithisolatedpowersupplies,thisdevicepreventsnoisecurrentsonadata
bus or other circuits from entering the local ground, and interfering with or damaging
sensitive circuitry
LVDS Selection Guide
Device Description
No.
of
Tx
No.
of
Rx
Input
Signal
Output
Signal
Signal
Rate
(Mbps)
TX tPd
(typ)
(ns)
RX tPd
(typ)
(ns)
ICC
(max)
(mA)
ESD
HBM
(kV)
Supply
Voltage
(V)
Auto
Qual
(Q1)
SN65LVDS1 Single LVDS transmitter 1 LVTTL LVDS 630 1.7 8 15 3.3 N
SN65LVDS2 Single LVDS receiver 1 LVDS LVTTL 400 2.6 7 15 3.3 N
SN65LVDS180 Single full-duplex LVDS
transceiver
1 1 LVTTL, LVDS LVTTL, LVDS 400 1.7 3.7 12 12 3.3 Y
SN65LVDS051 Dual LVDS transmitter/receiver 2 2 LVDS, LVTTL LVDS, LVTTL 400 1.7 3.7 20 12 3.3 Y
SN65LVDS84A FlatLink transmitter 3 LVDS LVDS 197 4.5 35 4 3.3 Y
SN65LVDS86A FlatLink receiver 3 LVDS LVDS 163 5 68 4 3.3 Y
SN65LVDS95 LVDS SerDes transmitter 3 LVDS LVDS 170 4.2 110 6 3.3 Y
MLVDS
SN65LVDM050 Dual LVDM transmitter/
receiver
2 2 LVTTL,
LVDM
LVTTL, LVDM 500 1.7 3.7 27 12 3.3 Y
SN65LVDM051 Dual LVDM transmitter/
receiver
2 2 LVTTL,
LVDM
LVTTL, LVDM 500 1.7 3.7 27 12 3.3 Y
Analog Automotive Guide Texas Instruments 3Q 2009
Interface
LVDS, MLVDS, RS-485/422/232
18

RS-485/422/232 Selection Guide

Temperature
Prefx Device
No. of
Tx
No. of
Rx
Supply
Voltage
(V)
Signaling
Rate
(Mbps)
ICC (max)
(mA)
ESD
(kV) Footprint
Auto
Qual
(Q1)
SN75 176A 1 1 5 10 50 2 SN75176 N
SN65, SN75 176B 1 1 5 10 70 2 SN75176 N
SN75 178B 1 1 5 10 70 2 SN75176 N
SN75 179B 1 1 5 10 70 2 SN75179 N
SN55, SN65,
SN75
LBC176 1 1 5 10 1.5 2 SN75176 Y
SN65, SN75 LBC176A 1 1 5 30 15 12 SN65176 N
SN65, SN75 LBC179 1 1 5 10 5 2 SN75179 N
SN65, SN75 LBC179A 1 1 5 30 15 16 SN75179 N
SN65, SN75 LBC180 1 1 5 10 5 2 SN75LBC180 Y
SN65, SN75 LBC180A 1 1 5 30 15 12 SN75180 N
SN65 C3221 1 1 3.3 or 5 1 1 15 SN75C3221 Y
TRS3223 2 2 3 to 5.5 0.25 1 15 Y
TRS3232 2 2 3 to 5.5 0.25 1 15 Y
Data Converters/Audio
Data Converters/Audio

Key Features
2.5-Vto5.25-Voperation
Internal2.5-Vreference
Directbatterymanagement
(05V to 6V)
On-chiptemperaturemeasurement
Touch-pressuremeasurement
I
2
Cinterfacesupports:standard,fast,
and high-speed modes
Packaging:TSSOP-16andVFBGA-48
Digital Isolator
TSC2003-Q1
Getsamplesanddatasheetsat:www.ti.com/sc/device/TSC2003-Q1
The TSC2003 is a 4-wire resistive touch screen controller It also features direct
measurement of two batteries, two auxiliary analog inputs, temperature measurement,
and touch-pressure measurement The TSC2003 has an on-chip 25-V reference that can
be utilized for the auxiliary inputs, battery monitors, and temperature-measurement modes
The reference can also be powered down when not used to conserve power The internal
reference will operate down to 27-V supply voltage while monitoring the battery voltage
from 05V to 6V The TSC2003 is available in the small TSSOP-16 and VFBGA-48 packages
and is specified over the 40C to +85C temperature range
CDAC
SAR
Comparator
MUX
I C
Interface
and
Control
Logic
2
SCL
SDA
A0
A1
Internal
Clock
Internal
2.5-V REF
TEMP0
TEMP1
PENIRQ
Channel Select
V
DD
V
DD
X+
X
Y+
Y
V
BAT1
V
BAT2
V
REF
IN1
IN2
Texas Instruments 3Q 2009 Automotive Selection Guide
Data Converters/Audio
Data Converters/Audio
19

ADCs Selection Guide

Device
Resolution
(Bits)
Sample
Rate
(max) Architecture
No. of
Input
Channels
(SE)
Power
Consumption
(typ)
(mW)
DNL
(max)
(LSB)
INL
(max)
(LSB)
No
Missing
Codes
(Bits)
Analog
Voltage
AV/DD
(min)
(V)
Analog
Voltage
AV/DD
(max)
(V)
Logic
Voltage
DV/DD
(min)
(V)
Logic
Voltage
DV/DD
(max)
(V)
Input
Type Package(s)
Auto
Qual
(Q1)
ADS5204 10 40MSPS Pipeline 2 275 1 1.5 10 0 3.6 0 3.6 Voltage 48/TQFP Y
ADS7822 12 200kSPS SAR 1 0.6 0.75 0.75 12 2.7 5.25 2.7 5.25 Voltage 8/MSOP Y
ADS7828 12 40kSPS SAR 8 0.675 1 1 12 2.7 5.25 2.7 5.25 Voltage 16/TSSOP Y
ADS7841 12 200kSPS SAR 4 0.84 1 1 12 2.7 5.25 2.7 5.25 Voltage 16/SSOP Y
TLC2543 12 66kSPS SAR 11 5 1 1 12 4.5 5.5 4.5 5.5 Voltage 20/SOP Y
TLV1548 10 85kSPS SAR 8 1 1 10 2.7 5.5 2.7 5.5 Voltage 20/SOP Y
TLV2553 12 200kSPS SAR 11 2.43 1 1 12 2.7 5.5 2.7 5.5 Voltage 20/SO,
20/TSSOP
Y
TLV5535 8 35MSPS Pipeline 1 106 2.4 2.4 3 3.6 3 3.6 Voltage 28/TSSOP Y

Class-D Audio Amplifers Selection Guide
Device Description
Output
Power
(W)
Supply
(V)
Half Power THD + N
at 1 kHz (%)
(kHz)
Iq per Channel
(typ) (mA)
ISD
(A)
PSRR
(dB)
Operating
Temp Range
(C)
Package(s)
Auto
Qual
(Q1)
TPA2000D1 Mono flter-free class-D audio amplifer 2
2.7 to 5.5
0.2 4 0.05
77 40 to 105 16/TSSOP Y
TPA2005D1 1.4-W mono flter-free class-D audio
power amplifer
1.18
2.5 to 5.5
0.2 2.8 0.5
75 40 to 85 8/SON,
8/MSOP
Y
TPA3100D2 20-W stereo class-D audio power
amplifer
20
10 to 26
0.11 18 80
70 40 to 85 48/QFN Y
TAS5414A Quad class-D audio amplifer, SE inputs 45
8 to 22
0.04 20 2
75 40 to 105 PSOP-36,
QFP-64
Y
TAS5424A Quad class-D audio amplifer, diff inputs 45
8 to 22
0.04 20 2
75 40 to 105 PSOP-44,
QFP-64
Y
TAS5412 Stereo class-D audio amplifer, SE inputs 100
6 to 24
0.06 20 2
75 40 to 105 QFP-64 Y
TAS5422 Stereo class-D audio amplifer, diff inputs 100
6 to 24
0.06 20 2
75 40 to 105 QFP-64 Y
Sample Rate Converters Selection Guide
Device Description
No. of
SRC
Channels
Sampling
Rate (max)
(kHz)
Resolution
(Bits)
Dynamic
Range
(dB)
THD+N
(dbB)
Digital
Audio
Interface
Control
Interface
Digital
Supply
(V)
Operating
Temp Range
(C) Package
Auto
Qual
(Q1)
SRC4190 192-kHz stereo asynchronous
sample rate converters
2 212 24 128 125 L, R, I
2
S,
TDM
H/W 3.3 40 to 85 28/SSOP Y
Codecs Selection Guide
Device Description
No. of
DACs/
ADCs
Sampling
Rate
(max) (kHz)
Resolution
(Bits)
SNR DAC/
ADC (typ)
(dB)
Digital
Audio
Interface
Control
Interface
PD
(typ)
(mW)
Analog
Supply
(V)
Digital
Supply
(V)
Operating
Temp Range
(C) Package
Auto
Qual
(Q1)
TLV320AIC23B Stereo audio codec, 8 to 96kHz,
with integrated headphone amp
2/2 96 24 100 / 90 L, R, I
2
S,
DSP
SPI, I
2
C 23 2.7 to
3.6
1.42 to 3.6 40 to 85 28/TSSOP Y
TWL1103T Voice-band audio processor
(VBAP)
15 I
2
C 2.7 to
3.3
2.7 to 3.3 40 to 105 32/TQFP Y
IF Interface for Digital Radio Selection Guide
Device Description
Resolution
(Bits)
Analog Input
BW (MHz)
No. of
Supplies
Analog Voltage
AV/DD
(min) (V)
Sample
Rate
(max) (MSPS)
Logic Voltage
DV/DD
(max) (V)
Power
Consumption
(typ) (mW)
Logic Voltage
DV/DD
(min) (V)
Analog Voltage
AV/DD
(max) (V)
Serial SPI
InterfacePackage
Auto
Qual
(Q1)
AFE8221 Dual IF interface
for digital radio
12 100 3 3.2 75 2 700 1.6 3.6 Yes 144/
HTQFP
Y
Touch Screen Controller Selection Guide
Device Description Interface
Touch
Panel
SAR ADC
Resolution
(Bits)
Supply
Voltage
(Analog) (min)
Vref
(Int/
Ext)
Supply Voltage
(Analog)
(max)
SAR
Sample Rate
(max) (kSPS)
Multi-
Channel
Single-
Ended
Input
Internal
Reference Package
Auto
Qual
(Q1)
TSC2003 I
2
C touch screen controller I
2
C Serial 4-Wire 12 2.7 Int 5.25 125 Yes Yes Yes 16TSSOP Y
19

Analog Automotive Guide Texas Instruments 3Q 2009

Microcontrollers/Embedded Processors
TMS320C2000
TM
Microcontrollers
20

20

20

20

20

20

20

The automotive industry is constantly looking for new ways to make their cars safer, more reliable, and more efficient The powerful
PWM modules and analog ADC integrated in C2000 devices can be used in applications like collision avoidance and electronically
controlled interfaces
The industry is also looking at a shift towards hybrid and fully electric vehicles, and C2000 provides a low-cost solution to many
aspects of HEV/EV operation With a powerful DSP-based core, a variety of communication protocols including LIN and CAN, and
automotive AEC-Q100 qualification (-40C to 125C), C2000 works to complete your automotive designs

Witha32-bitarchitecture,advancedperipherals,analogintegrationandpackagessizesfrom32to256pins,theC2000MCUfamily
enables real-time control in a variety of applications The C28x
TM
32-bit core features a single-cycle 32x32-bit hardware multiplier
and single-cycle atomic instruction execution The controlCARD-based tools and software libraries help to dramatically shorten
development time Explore our wide range of products and configurations to find the solution for your designs
Piccolo
TM
: 32-bit microcontrollers, small package, big performance
The new TMS320F2802x/F2803x Piccolo family of C2000 MCUs provides a low-cost, high-integration solution to help drive processor
intensive real-time control into cost-sensitive applications Initial F2802/F2803x devices will include 40- to 60-MHz variations and up
to 128 KB of flash memory along with a host of integrated modules such as a powerful ADC, dedicated high-resolution PWMs, high-
precision on-chip oscillators, analog comparators, power-on reset, and brown-out protection A floating-point Control Law Accelerator
(CLA) can run control loops independent of the core Available in multiple package options starting at 38 pins, the Piccolo family is
the ultimate combination of performance, integration, size and low cost www.ti.com/piccolo
Delfino
TM
MCU: floating-point development at your finger tips
With the Delfino microcontroller, TI offers two flavors of floating-point MCUs with unparalleled performance F2833x devices operate
at 150 MHz with 300 MFLOPS of performance The F283xx MCUs offer a 50% performance boost, on average, over current C2000
MCUs while operating at the same 150-MHz clock rate Built on the standard C28x MCU architecture, they are 100% software
compatible with all current F28xx MCUs
The new C2834x Delfino MCUs push the limits even further, offering 600 MFLOPS of performance The C2834x platform allows up
to 52% code reduction and 70% reduction in memory access time over current C2000 MCUs Additionally, the high-resolution PWM
offers 65-ps resolution New speeds enable greater intelligence and efficiency in high-end real-time control applications
www.ti.com/delfino
Automotive Applications

Key Applications
Automotiveradarand
collision avoidance
Electricpowersteering
Drive-by-wire
Powerconversion
HybridElectricVehicle/Electric
Vehicle (HEV/EV)

Off-line battery charger

DC/DC power conversion

Battery management system

Electric motor inverter

Device Nomenclature Decoder

TMS320 F 28027 ZGM A
Device family
TMS320 = TMS320
TM
MCU Family
Technology
F = Flash EEPROM
C = ROM/RAM
Device number
280x/281x/282x = Fixed point series
2802x/2803x = Piccolo series
283x = Delfino floating-point series
Package type
Temperature range
A = 40C to 85C
T = 40C to 105C
S = 40C to 125C
Q = 40C to 125C (AEC-Q100)
C2000 Microcontrollers
Device
Speed
(MHz) DMA CLA
RAM
(KB)
Flash
(KB)
ROM
(KB)

PWM
Channels
HiRes
PWM
Quadrature
Encoder
Event
Captures Timers*
12-Bit ADC
Channels/
Conversion
Time (ns) McBSP I
2
C
UART/
SCI SPI Lin CAN
External
Memory
Bus
(bit)
Core
Supply
(Volts)
GPIO
Pins
On-Chip
Oscillator/
Regulator Package
Piccolo MCUs
TMS320F28022DAQ 40 12 32 Boot 9 4 1 9 7/ 325 1 1 1 3.3 20 Yes / Yes 38TSSOP
TMS320F28022PTQ 40 12 32 Boot 9 4 1 9 13/ 325 1 1 1 3.3 22 Yes / Yes 48LQFP
TMS320F28023DAQ 40 12 64 Boot 9 4 1 9 7/ 325 1 1 1 3.3 20 Yes / Yes 38TSSOP
TMS320F28023PTQ 40 12 64 Boot 9 4 1 9 13/ 325 1 1 1 3.3 22 Yes / Yes 48LQFP
TMS320F28026DAQ 60 12 32 Boot 9 4 1 9 7/217 1 1 1 3.3 20 Yes / Yes 38TSSOP
TMS320F28026PTQ 60 12 32 Boot 9 4 1 9 13/217 1 1 1 3.3 22 Yes / Yes 48LQFP
TMS320F28027DAQ 60 12 64 Boot 9 4 1 9 7/217 1 1 1 3.3 20 Yes / Yes 38TSSOP
TMS320F28027PTQ 60 12 64 Boot 9 4 1 9 13/217 1 1 1 3.3 22 Yes / Yes 48LQFP
TMS320F28030PAGQ 60 12 32 Boot 13 1 1 11 14/ 500 1 1 1 1 1 3.3 33 Yes / Yes 64TQFP
TMS320F28030PNQ 60 12 32 Boot 15 1 1 12 16/ 500 1 1 2 1 1 3.3 45 Yes / Yes 80LQFP
TMS320F28031PAGQ 60 16 64 Boot 13 1 1 11 14/ 500 1 1 1 1 1 3.3 33 Yes / Yes 64TQFP
TMS320F28031PNQ 60 16 64 Boot 15 1 1 12 16/ 500 1 1 2 1 1 3.3 45 Yes / Yes 80LQFP
TMS320F28032PAGQ 60 20 64 Boot 13 6 1 1 11 14/217 1 1 1 1 1 3.3 33 Yes / Yes 64TQFP
TMS320F28032PNQ 60 20 64 Boot 15 7 1 1 12 16/217 1 1 2 1 1 3.3 45 Yes / Yes 80LQFP
TMS320F28034PAGQ 60 20 128 Boot 13 6 1 1 11 14/217 1 1 1 1 1 3.3 33 Yes / Yes 64TQFP
TMS320F28034PNQ 60 20 128 Boot 15 7 1 1 12 16/217 1 1 2 1 1 3.3 45 Yes / Yes 80LQFP
TMS320F28033PAGQ 60 Yes 20 64 Boot 13 6 1 1 11 14/217 1 1 1 1 1 3.3 33 Yes / Yes 64TQFP
TMS320F28033PNQ 60 Yes 20 64 Boot 15 7 1 1 12 16/217 1 1 2 1 1 3.3 45 Yes / Yes 80LQFP
TMS320F28035PAGQ 60 Yes 20 128 Boot 13 6 1 1 11 14/217 1 1 1 1 1 3.3 33 Yes / Yes 64TQFP
TMS320F28035PNQ 60 Yes 20 128 Boot 15 7 1 1 12 16/217 1 1 2 1 1 3.3 45 Yes / Yes 80LQFP
C2834x Delfno (Floating-Point) MCUs
TMS320C28346ZEPQ 300 Yes 516 Boot 24 9 3 6 19 2 1 3 2 2 16 / 32 1.2 88 256GBA
TMS320C28345ZEPQ 200 Yes 516 Boot 24 9 3 6 19 2 1 3 2 2 16 / 32 1.1 88 256GBA
TMS320C28344ZEPQ 300 Yes 260 Boot 24 9 3 6 19 2 1 3 2 2 16 / 32 1.2 88 256GBA
TMS320C28343ZEPQ 200 Yes 260 Boot 24 9 3 6 19 2 1 3 2 2 16 / 32 1.1 88 256GBA
TMS320C28342ZEPQ 300 Yes 196 Boot 16 6 2 4 14 1 1 3 2 2 16 / 32 1.2 88 256GBA
TMS320C28341ZEPQ 200 Yes 196 Boot 16 6 2 4 14 1 1 3 2 2 16 / 32 1.1 88 256GBA
F2833x Delfno (Floating-Point) MCUs
TMS320F28335ZJZQ 150 Yes 68 512 Boot 18 6 2 6 16 16 /80 2 1 3 1 2 16 / 32 1.9 88 179BGA
TMS320F28334ZJZQ 150 Yes 68 256 Boot 16 6 2 4 14 16 /80 2 1 3 1 2 16 / 32 1.9 88 179BGA
TMS320F28332ZJZQ 100 Yes 52 128 Boot 16 4 2 4 14 16 /80 1 1 2 1 2 16 / 32 1.9 88 179BGA
F28x Fixed-Point MCUs
TMS320F28235ZJZQ 150 Yes 68 512 Boot 18 6 2 6 16 16 /80 2 1 3 1 2 16 / 32 1.9 88 179BGA
TMS320F28234ZJZQ 150 Yes 68 256 Boot 16 6 2 4 14 16 /80 2 1 3 1 2 16 / 32 1.9 88 179BGA
TMS320F28232ZJZQ 100 Yes 52 128 Boot 16 4 2 4 14 16 /80 1 1 2 1 2 16 / 32 1.9 88 179BGA
TMS320F2812GHHQ 150 36 256 Boot 16 2 6 8 16 /80 1 2 1 1 16 1.9 56 179BGA
TMS320F2812PGFQ 150 36 256 Boot 16 2 6 8 16 /80 1 2 1 1 16 1.9 56 176LQFP
TMS320F2811PBKQ 150 36 256 Boot 16 2 6 8 16 /80 1 2 1 1 1.9 56 128LQFP
TMS320F2810PBKQ 150 36 128 Boot 16 2 6 8 16 /80 1 2 1 1 1.9 56 128LQFP
TMS320F2809PZQ 100 36 256 Boot 16 6 2 4 14 16 /80 1 2 4 2 1.8 35 100LQFP
TMS320F2808PZQ 100 36 128 Boot 16 4 2 4 14 16 /160 1 2 4 2 1.8 35 100LQFP
TMS320F2806PZQ 100 20 64 Boot 16 4 2 4 14 16 /160 1 2 4 1 1.8 35 100LQFP
TMS320F2802PZQ 100 12 64 Boot 8 3 1 2 9 16 /160 1 1 2 1 1.8 35 100LQFP
TMS320F2801PZQ 100 12 32 Boot 8 3 1 2 9 16 /160 1 1 2 1 1.8 35 100LQFP
TMS320F28016PZQ 60 12 32 Boot 10 4 2 10 16 /267 1 1 1 1 1.8 35 100LQFP
TMS320F28015PZQ 60 12 32 Boot 10 4 2 10 16 /267 1 1 1 1.8 35 100LQFP
C28x ROM MCUs
TMS320C2812PGFQ 150 36 256 16 2 6 8 16 /80 1 2 1 1 16 1.9 56 176LQFP
TMS320C2811PBKQ 150 36 256 16 2 6 8 16 /80 1 2 1 1 1.9 56 128LQFP
TMS320C2802PZQ 100 12 64 8 3 1 2 9 16 /160 1 1 2 1 1.8 35 100LQFP
TMS320C2801PZQ 100 12 32 8 3 1 2 9 16 /160 1 1 2 1 1.8 35 100LQFP
All devices available in Pb-Free/Green packaging.
*Timers include CPU timers, PWM timers, eCAP timers, and Watchdog timers.
Texas Instruments 3Q 2009 Automotive Selection Guide
Microcontrollers/Embedded Processors
TMS320C2000
TM
Microcontrollers
21

Automotive Selection Guide Texas Instruments 3Q 2009

Microcontrollers and Embedded Processors
DaVinci
TM
Processors
22

22

22

22

22

22

DaVinci
TM
Processors (DM648) Selection Guide
Device
1
CPU
Frequency
(MHz)
L1 P/L1 D
SRAM
(Bytes)

L2/
SRAM
(Bytes)
ROM
(Bytes)
External
Memory
I/F
EDMA
(Ch)
Video Ports
(Confgurable)
Serial
I/F
Connectivity
I/F
3
Program/
Data
Storage
Voltage
Core (V) I/O Package
TMS320DM648ZUTQ7 C64x+,
DaVinci
Video
720 32K/32K 512K 64K 1 16-/
8-bit
64 3 video ports 2 I
2
C, PCI/HPI, Async
SRAM,
1.2 1.8/
3.3
529 nFBGA
19 19
mm
TMS320DM648ZUTQ8 C64x+,
DaVinci
Video
800 32K/32K 1.4M 64K EMIFA
2
,
1 32-/
16-bit
DDR2
5 video ports
(each confgurable
as dual capture,
single capture, dis-
play, TSI capture)
1 SPI, 1
UART, 1
McASP
2 TSIP
VLYNQ,
10/100/1000
3-pt Ethernet
Switch Subsys
w/ 2 SGMII Pts
DDR2
SDRAM,
NAND
Flash,
NOR Flash
1.2 1.8/
3.3
529 nFBGA
19 19
mm
1
Q designates AEC-Q100 automotive grade.
2
EMIFA does not support SDRAM.
3
HPI is selectable, 32-bit or 16-bit.
DaVinci
TM
Processors (DM643x) Selection Guide
Device
1
CPU
Frequency
(MHz)
L1 P/L1
D (3)
SRAM
(Bytes)

L2/
SRAM
(Bytes)
ROM
(Bytes)
External
Memory
I/F
EDMA
(Ch)
Video Ports
(Hardware
support)
Serial
I/F
Connectivity
I/F
Program/Data
Storage
Voltage
Core
(V) I/O Package
TMS320DM6431ZWTQ3 C64x+,
DaVinci
Video
300 32 K/32
K
64 K 64 K 1 8-bit EMIFA,
1 16-bit DDR2
64 1 Input - 10 bit McASP, I
2
C,
1 UART,
1 McBSP,
1 HECC
10/100 EMAC Async SRAM,
DDR2 SDRAM,
NAND Flash
1.2 1.8/
3.3
361 PBGA,
16 16
mm
TMS320DM6431ZDUQ3 C64x+,
DaVinci
Video
300 32 K/32
K
64 K 64 K 1 8-bit EMIFA,
1 16-bit DDR2
64 1 Input - 10 bit McASP, I
2
C,
1 UART,
1 McBSP,
1 HECC
10/100 EMAC Async SRAM,
DDR2 SDRAM,
NAND Flash
1.2 1.8/
3.3
376 BGA,
23 x 23 mm
TMS320DM6435ZWTQ4 C64x+,
DaVinci
Video
400 32 K/80
K
64 K 64 K 1 8-bit EMIFA,
1 16-/32- bit
DDR2
64 1 Input - 16 bit McASP, I
2
C,
1 McBSP,
2 UARTs,
1 HECC
VLYNQ,
10/100 EMAC
16-bit HPI
Async SRAM,
DDR2 SDRAM,
NAND Flash
1.05/
1.2
1.8/
3.3
361 PBGA,
16 16
mm
TMS320DM6435ZWTQ5 C64x+,
DaVinci
Video
500 32 K/80
K
128 K 64 K 1 8-bit EMIFA,
1 16-/32- bit
DDR2
64 1 Input - 16 bit McASP, I
2
C,
1 McBSP,
2 UARTs,
1 HECC
VLYNQ,
10/100 EMAC
16-bit HPI
Async SRAM,
DDR2 SDRAM,
NAND Flash
1.05/
1.2
1.8/
3.3
361 PBGA,
16 16
mm
TMS320DM6435ZWTQ6 C64x+,
DaVinci
Video
660 32 K/80
K
128 K 64 K 1 8-bit EMIFA,
1 16-/32- bit
DDR2
64 1 Input - 16 bit McASP, I
2
C,
1 McBSP,
2 UARTs,
1 HECC
VLYNQ,
10/100 EMAC
16-bit HPI
Async SRAM,
DDR2 SDRAM,
NAND Flash
1.05/
1.2
1.8/
3.3
361 PBGA,
16 16
mm
TMS320DM6435ZDUQ4 C64x+,
DaVinci
Video
400 32 K/80
K
128 K 64 K 1 8-bit EMIFA,
1 16-/32- bit
DDR2
64 1 Input - 16 bit McASP, I
2
C,
1 McBSP,
2 UARTs,
1 HECC
VLYNQ,
10/100 EMAC
16-bit HPI
Async SRAM,
DDR2 SDRAM,
NAND Flash
1.05/
1.2
1.8/
3.3
376 BGA,
23 x 23 mm
TMS320DM6435ZDUQ5 C64x+,
DaVinci
Video
500 32 K/80
K
128 K 64 K 1 8-bit EMIFA,
1 16-/32- bit
DDR2
64 1 Input - 16 bit McASP, I
2
C,
1 McBSP,
2 UARTs,
1 HECC
VLYNQ,
10/100 EMAC
16-bit HPI
Async SRAM,
DDR2 SDRAM,
NAND Flash
1.05/
1.2
1.8/
3.3
376 BGA,
23 x 23 mm
TMS320DM6435ZDUQ6 C64x+,
DaVinci
Video
660 32 K/80
K
128 K 64 K 1 8-bit EMIFA,
1 16-/32- bit
DDR2
64 1 Input - 16 bit McASP, I
2
C,
1 McBSP,
2 UARTs,
1 HECC
VLYNQ,
10/100 EMAC
16-bit HPI
Async SRAM,
DDR2 SDRAM,
NAND Flash
1.05/
1.2
1.8/
3.3
376 BGA,
23 x 23 mm
TMS320DM6437ZWTQ4 C64x+,
DaVinci
Video
400 32 K/80
K
128 K 64 K 1 8-bit EMIFA,
1 16-/32- bit
DDR2
64 1 Input - 16 bit
1 Output
(digital/analog)
McASP, I
2
C,
1 HECC
2 McBSPs
2
,
2 UARTs,
32-bit PCI,
VLYNQ,
10/100 EMAC
16-bit HPI
Async SRAM,
DDR2 SDRAM,
NAND Flash
1.05/
1.2
1.8/
3.3
361 PBGA,
16 16
mm
TMS320DM6437ZWTQ5 C64x+,
DaVinci
Video
500 32 K/80
K
128 K 64 K 1 8-bit EMIFA,
1 16-/32- bit
DDR2
64 1 Input - 16 bit
1 Output
(digital/analog)
McASP,
I
2
C,
1 HECC
2 McBSPs
2
,
2 UARTs,
32-bit PCI,
VLYNQ,
10/100 EMAC
16-bit HPI
Async SRAM,
DDR2 SDRAM,
NAND Flash
1.05/
1.2
1.8/
3.3
361 PBGA,
16 16
mm
TMS320DM6435ZWTQ6 C64x+,
DaVinci
Video
660 32 K/80
K
128 K 64 K 1 8-bit EMIFA,
1 16-/32- bit
DDR2
64 1 Input - 16 bit
1 Output
(digital/analog)
McASP, I
2
C,
1 HECC
2 McBSPs
2
,
2 UARTs,
32-bit PCI,
VLYNQ,
10/100 EMAC
16-bit HPI
Async SRAM,
DDR2 SDRAM,
NAND Flash
1.05/
1.2
1.8/
3.3
361 PBGA,
16 16
mm
TMS320DM6437ZDUQ4,
Q5, Q6
C64x+,
DaVinci
Video
400/500
/600
32 K/80
K
128 K 64 K 1 8-bit EMIFA,
1 16-/32- bit
DDR2
64 1 Input - 16 bit
1 Output
(digital/analog)
McASP,
I
2
C,
1 HECC
2 McBSPs
2
,
2 UARTs,
32-bit PCI,
VLYNQ,
10/100 EMAC
16-bit HPI
Async SRAM,
DDR2 SDRAM,
NAND Flash
1.05/
1.2
1.8/
3.3
376 BGA,
23 x 23 mm
1
Q designates AEC-Q100 automotive grade.
2
McBSP can be configured as SPI peripheral.
Texas Instruments 3Q 2009 Automotive Selection Guide
Design Support 23

23

23

Receive Updates on TIs Solutions

for Automotive Applications
By registering with my.TI
and telling us your areas
of interest by application,
product, etc, you
can receive the latest
information valuable to
you To receive automotive
updates, be sure to select
Automotive under
Edit Areas of Interest
TIs Analog eLab Design Center
Can Help You with All Your Design Needs
LEARN from TI experts to solve your real-world design problems
SELECT the right TI product for your design using tools to narrow
your choices based on your criteria
DESIGN circuits quickly using recommendations for circuit topologies
and TIs reference designs
SIMULATE using downloadable SPICE and IBIS models for a working
simulation environment
SAMPLE various analog products and
receive within 24 hours
Texas Instruments
Design Center
Analog
TM
www.ti.com/analogelab
SGZB002E
PRSRT STD
US POSTAGE
PAID
DALLAS,TEXAS
PERMIT NO
2758
14950 FAA Blvd
Fort Worth, Texas 76155
Address service requested
Amplifier and Data Converter
Analog Switch
Clocks and Timing
DSP
Interface
Logic
Low-Power RF
MSP430
Power Management
Todownloadtheseguides,pleasevisit:
www.ti.com/selection