Days Theory

Topics Covers

Introduction to Structural Anlysis. DAY 01

What is Structural Analysis Role of Structural Analysis in Civil Engineering Projects. Classification of Structures. Analytical Models

Practical DAY 02

How to see Architectural Drawings-Plan Views and Elevation Views. What are the other requirements of the project other disciplines interferences.

Theory

Introduction to Staad and its components Creation of Geometry.

Day 03

Practical

Creating Basic Geometry (Beams/Columns) in Architectural Drawing Entering Coordinates

Theory

Basic Geometry Continued Snap/Node Beam

Day 04 Practical

Creating some Geometry parts (Beams/Columns) in Architectural Drawing by Snap/Node Beam Command.

Theory

Modifying Geometry of Members

Day 05 Practical

Creating Geometry of Structures using Split Beam and

Stretching of Members

Theory

Use of Bracings in Structure Placement of Bracings in Structure. Geometry of Bracings in Structure.

Day 06 Practical

Creating Geometry of Vertical and Horizontal Bracings in the Structure

Theory

Use of Shear wall in Structure Placement of Shear Wall in Structure. Geometry of Shear Wall in Structure.

Day 07 Practical

Introduction to Plate Elements Creating Geometry of Shear Wall in the Structure

Theory

Day 08

Miscellaneous Geometry in the Structure - Curved Beams , Solids. Revision of Geometry of Structure as in Architectural Drawing.

Practical

Creating Geometry of Curved Beams/Solids in the Structure

Practical Day 09

Selection of Members Creating Group of Members.

Theory

Meaning of Property of Members Steel and Concrete.

Day 10

Practical

Assigning of Property to Members For Steel Members Using Section Database. For Concrete Members Using Define Tab

Practical Day 11

Assigning Property to Members (Continued) Creating User Table Using Section Wizard

Theory

Day 12

Releases in members. Meaning of Connections in Steel members. Concrete Joints and Connections. Truss, Tension and Compression members Use of Master/Slave Joints.

Practical

Day 13

Using Specification Commands in members- beam Using Specification Command as Truss, Tension and Compression members. Using Master/Slave Command in Staad

Theory

Introduction to various types of Supports- Fixed, Pinned, Fixed But and Enforced but Supports.

Day 14

Practical

Creating Different types of Supports in Staad using Create Support Command.

Theory

Various Types of Loadings. Basics of Dead Load, Live Load and Snow Load.

Day 15

Practical

Applying Different types of Loads Dead, Live and Snow Load in Structure using Staad

Theory

Various Types of Loadings- Continued Basics of Seismic Load ,Wind Load and Miscellaneous Loading

Day 16 Practical

Applying Different types of Loads-Seismic Load, Wind Load and Miscellaneous Load in Structure using Staad

Theory

What is Load Combinations? How is Load Combinations Created?

Day 17 Practical

Creating Various Load Combinations in Staad.

Theory Day 18

What is Analysis of Structure? Various types of Structural Analysis methods

Practical

Pre-Print and Post-Print analysis command in Staad Various types of Perform Analysis in Staad. Performing Analysis in Staad

Theory

Introduction to Design of Structures. Familiarity with Different codes

Day 19

Practical

Assigning Code to Structure. Assigning Various Parameters to Structure

Practical

Day 20

Parameters to Structures Continued Slenderness and Unsupported Length Commands. Assigning Commands to Structure Performing Analysis after Design Working with Editor Input file of Staad Familiarity with Various Commands used in Staad Input File.

Theory

Support Reactions, Bending Moment, Shear force diagram Deflection and Utility Check basics

Day 21 Practical

Using Post Processing Command in the Structure Analyzing various Analysis Results at various members and Joints.

Practical Day 22

Viewing Staad Output File Design File of Structure Generation of Project Report Revision of Concepts of Super Structure.

Theory

Introduction to Foundation Design-Isolated, Combined and Mat Footings Introduction to Finite Plate Elements

Day 23 Practical

Creating Geometry from the Architectural Drawing Using Finite Element meshing in Staad to create geometry

Practical Day 24

Assigning Property to Plate Elements Defining Supports for Foundations Assigning Loads to Sub Structure from Super Structure

Practical Day 25

Assigning Additional Loads to Structure Defining Load Combinations of Sub -Structure Performing Analysis of Structure.

Theory

Introduction to Base Pressures, Plate Stresses and Bending Stresses.

Day 26 Practical

Analyzing Post Processing Results of Super Structure

Theory

What are Design Sheets in Software and Excel?

Day 27 Practical

Using Staad results in Design Sheet and Designing the Structure.

Practical Day 28

Generation of Project report for Sub Structure

Day 29 Queries & Doubts Day 30 Certificate Distribution Cum Farewell Ceremony KIT CONTENTS : KIT CONTENTS Complete Course Content showing Step by Step of doing Structural Analysis and Design using Staad Pro CDs Containing Advanced Course Content in form of Video Tutorials. Complete Project Report of all the Projects Staad Pro Software- Full Version Various types of Concrete Design Sheets in Excel Connection Design Templates Base Plate Design Templates. PROJECTS : PROJECTS LIST FOR ADVANCE MODULE 1. 2. Super Structure Design Covers both Steel and Concrete Members. Sub Structure Design Covers Foundation Design Concrete

Why Structural Analysis & Desing using MatLab Training from RoboSpecies Technologies ? Lot of Major Projects will be covered in this Training. 1.

1 major project is covered in Basic Module 1+1 project is covered in Advanced Module 1+1+3 project is covered in Ultra Module

2. Prepares you well for job placement in design oriented industries 3. 4. Familiarity with global design codes mainly Indian, American, British and Canadian Codes. Our syllabus is professionally designed to cover Basic as well as Advance aspects of Structural Analysis and Design.

Each day of our training is well planned to provide you the Theoretical as well as Practical Knowledge of the module Each day will come up with New Practicals which makes the training 6. interesting and exciting. 5. 7. 8. 9. Time to time Practical Assignments will be provided to the students, which will help them in doing practice at home. Revision Time & Query Sessions are provided to the students which help them in clearing their all previous doubts. Exam will be conducted at the end of Basic as well as Advance module to test the knowledge level of the students. Pre - Requisites 1. Basic knowledge of Structural Analysis and Design. 2. Basics of Civil Engineering. 3. Eagerness to learn new innovative things. Who Could Attend this Training ?

Students from B.E/B.Tech/M.Tech/Diploma (Civil Engineering) can join this training. Anyone who have interest in this field and have pre-requisite knowledge.