Scribd
Upload
166 views

NULEC rl2

Auto-recloser

Uploaded by

gosalhs9395
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
166 views

NULEC rl2

Auto-recloser

Uploaded by

gosalhs9395
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

RL-Series pole mounted load break switch

Introduction and Features


The RL-Series pole mounted gas insulated load break switch is available in manual and a remotely controlled switch. These switches provide the features of traditional load break switches, plus the benefits of an up to date design optimised for remote control.
After carefully evaluating customers needs, the RL-Series gas insulated load break switch was developed to achieve optimum performance and reliability, making use of the latest in available technology in SF6 arc interruption. The result is a competitive world-class product of which we are justly proud. By using this technologically advanced equipment, operating costs will be reduced, revenue will be increased through reduced outages and capital works can be deferred through better management of existing plant.

Reduced Purchase Cost


A modular design provides an easy upgrade path. It is possible to upgrade the basic manually operated model to a motorised remotely controlled switch.

Reduced Installation Costs


A cross arm mounting bracket is provided in the standard package. The 27kV model is supplied with a 400 amp insulated cable tail kit. Cables are not included with the 15kV bare terminal model.

Reduced Operating Costs


Long lifetime, low maintenance equipment reduces lifetime cost.

Increased Revenue
Supply can be quickly restored to unaffected areas, resulting in less outage time and therefore increased revenue.

Deferred Capital Works


Remotely controlled load break switches provide better system control. Feeder and substation load can then be remotely managed improving utilisation of existing plant. Purchase of new plant can then most likely be deferred for a considerable period of time.

RL-Series

Nu-Lec Industries

Gas Insulated Switch Overview and Operation


The RL-Series gas insulated pole mounted load break switch can be upgraded to an automated unit with communications.
The switch is designed around puffer interrupters contained in a fully welded and sealed 316 grade stainless steel enclosure filled with SF6 gas. The SF6 gas as the insulating and arc quenching media together with the puffing principle ensure the positive breaking of small currents, mainly active load currents, cable charging current, magnetising current, etc. The extremely short arcing times (within half a cycle) plus tulip type contacts with arc resistant material ensure the long switching life and extended short circuit making capability. The interrupters are ganged together and driven by an over-centering spring mechanism. This is operated either manually or by a DC motor in a motor compartment below the tank. All switches are fitted with a manual operating arm that allows hookstick operation from ground level. By pulling on the appropriate side of the arm the load break switch can be tripped or closed. The mechanism is "operator independent" so that it does not matter how fast or slow the arm is moved by the operator. A motor mechanism is used in feeder automation schemes to facilitate remote control. The motor is fitted to the switch and its power is supplied from batteries installed in the pole mounted control and communications cubicle. This cubicle also houses the mechanism control and battery charging unit. A detachable control cable is used to connect the cubicle to the switch. The tulip contact with arc resistant material (Cu-W) ensures the long contact life and high short circuit making capability.

Modular design

Safe design
In the event of an internal arc fault, a vent on the side of the load break switch ruptures to vent the over-pressure. This eliminates the risk of explosion or detachment from the power pole and since the unit is not oil filled, a major fire hazard is eliminated.
Load Break Switch with optional motor

A low pressure locking device locks the manual operating handle if the pressure drops below a pre-set threshold.

Easy Installation
High voltage connections are made with insulated cable terminated on epoxy bushings. The cable and bushings are covered by a gripping elastomeric boot that is filled with silicone grease to form an insulated system on the 27kV model. The 15kV model is provided with bare terminals instead of the covered assemblies. The switch is installed using the standard cross arm mounting bracket.

SF6 switch Motor Control Cubicle Mechanism control Battery charging unit
Motor and Control is Optional

Motor Option
An optional motor pack can be purchased which then allows the switch to be interfaced to Nu-Lec Industries or third party control cubicles to provide local and/or remote control.

RTU and modem

Nu-Lec Industries

RL-Series

Pole Mounting Details

Surge Arresters always earthed to tank, even if mounted separately Surge Arrester

Earth Stud

Antenna (if fitted) earthed to tank

Two M20 bolts for timber pole mounting (not supplied) or Two clamp bands for concrete pole mounting (optional)

Motor

Control Cable

Main Earth Bond

Tee Off

User supplied Control Cubicle

Control Cubicle Earth

Earth stud

Pole mounted installation showing the load break swithc with motorised remote control

Note:
1. Details given in this illustration are subject to change without notice. For full details refer the separate Technical Manual.

RL-Series

Nu-Lec Industries

Cable Terminations

Factory fitted Bare Terminal

Standard Lug

Bare Terminal 15kV 630A

Bushing

Threaded End Silicone Grease

Clamp Ring

Boot

Cable terminated with threaded end (630A)

Palm factory fitted to bushing

Standard Lug Silicone Grease

Bushing Clamp Ring Cable terminated with standard lug (250&400A) Boot

Nu-Lec Industries

RL-Series

RL-Series specifications
15kV 12.5kA
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15kV .630A .12.5kA .31.5kA .3000 .600 .12.5kA

Ratings
Maximum System Voltage . . . Rated Continuous Current . . . Fault Make Capacity (RMS) . . Fault Make Capacity (Peak) . . Mechanical Operations . . . . . Rated Full Load Operations . . Short Time Current (4s RMS)

15kV 16kA
15kV 630A 16kA 40kA 3000 600 16kA

27kV 12.5kA
27kV 630A 12.5kA 31.5kA 3000 600 12.5kA

27kV 16kA
27kV 630A 16kA 40kA 3000 600 16kA

Breaking Capacity
Mainly Active (0.7pf) . . . . . . . . . . . . . . . . . . . .630A Cable Charging . . . . . . . . . . . . . . . . . . . . . . . .25A Transformer Magnetising . . . . . . . . . . . . . . . . .22A 630A 25A 22A 630A 25A 22A 630A 25A 22A

Impulse Insulation Level


Phase to Phase . . Phase to Earth . . . Across Interrupter On Loss of SF6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125kV .125kV .145kV .50kV 125kV 125kV 145kV 50kV 150kV 150kV 170kV 70kV 150kV 150kV 170kV 70kV

Power Frequency Insulation Level


Phase to Earth . . . . . . . . . . . . . . . . . . . . . . . . .40kV Across Interrupter . . . . . . . . . . . . . . . . . . . . . .50kV 40kV 50kV 60kV 60kV 60kV 60kV

Environmental
Ambient Temperature Radiation (Max) . . . . . Humidity . . . . . . . . . . Altitude (Max) (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-30 to +50C .1.1kW/m2 .0 to 100% .3000m -30 to +50C 1.1kW/m2 0 to 100% 3000m -30 to +50C 1.1kW/m2 0 to 100% 3000m -30 to +50C 1.1kW/m2 0 to 100% 3000m

Net Weights
Load break switch
(2)

. . . . . . . . . . . . . . . . . . . .95kg

95kg

95kg

95kg

Crate Dimensions
Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W=1200mm D=1150mm H=755mm

1 2

For altitudes above 1000m, derate in accordance with ANSI C37.63 For Gross Weights add 75kg

RL-Series

Nu-Lec Industries

Ordering Information
The RL-Series LBS ordering information comprises one part number. The load break switch part number includes a Model Identifier and fields describing the Automation Status, Insulation Medium, System Voltage, Fault Make Capacity, Insulation Level and Cable Rating. The part number does not include measurement units and is constructed using only one option per field in the selection chart below. A part number example is shown below: Nu-Lec-RL27-LBS-RC-SF6-27-16-150-400 Nu-Lec RL27-LBS 2

- SF6 -

Field descriptions
1. Model: RL27 is the current model

RL-Series LBS

RL27-LBS

RL27-LBS

2. Automation Status: MR = Manual, excl. motor RC = Remote, incl. motor

MR RC

MR RC

3. Insulation Medium: SF6 gas insulated load break switch 4. System Voltage: 15 = 15kV, 27 = 27kV

SF6

SF6

15 27

5. Fault Make Capacity: 12 = 12.5kA 16 = 16kA

12 16

12 16

6. Insulation Level: 125 = 125kV 150 = 150kV

125 150

7. Cable Rating: 250 = 250A, 400 = 400A 630 = 630A 630-BT = 630A Bare Terminal (BT) (15kV max.)

250 400 630 630-BT


15kV

250 400 630

Nu-Lec Industries

RL-Series

Distributor:

Brochure Part Number:

N00-598

CORPORATE OFFICE & FACTORY 35-37 South Street, Lytton, 4178 Queensland, Australia PO Box 761, Edith Street Wynnum, Queensland, 4178 Telephone (07) 3249 5444 Intl +61 7 3249 5444 Facsimile (07) 3249 5888 Intl +61 7 3249 5888 E-mail: [email protected] http://www.nulec.com.au

UK OFFICE Unit 9, Kings Meadow Ferry Hinksey Road Oxford OX2 0DP United Kingdom Telephone (01865) 209 999 Intl +44 1865 209 999 Facsimile (01865) 209 900 Intl +44 1865 209 900 E-mail: [email protected] http://www.nulec.co.uk

USA OFFICE 1252 Old Alpharetta Road Alpharetta, Georgia 30005-3986 United States of America Telephone (770) 521 2000 Intl +1770 521 2000 Facsimile (770) 521 2100 Intl +1770 521 2100 E-mail: [email protected] http://www.nulec.com

SOUTH AFRICA OFFICE Cnr. Bekker & Montrose Rds, Midrand, South Africa Postal address: Private Bag X139, Halfway House, 1685 Telephone (011) 254 6400 Intl +27 11 254 6400 Facsimile (011) 254 6925 Intl +27 11 254 6925 E-mail: [email protected] http://www.nulec.co.za

Copyright 2001 Nu-Lec Industries Pty Ltd. No responsibility for loss incurred by any person acting or refraining from action in reliance upon any material in this brochure can be accepted by Nu-Lec Industries Pty Ltd.

You might also like