Ip6 Standard
Ip6 Standard
The ratings first digit e.g. IP65 relates to the ingress protection against dust (6 means dust tight, see the table below) The second digit e.g. IP65 relates to the ingress protection against water (5 means protected against water jets, see the table below) Protection against solid objects 1st Description Digit Non-protected 0 1 2 3 4 5 6 Protected against solid objects greater than 50 mm Protected against solid objects greater than 12 mm Protected against solid objects greater than 2.5 mm Protected against solid objects greater than 1.0 mm Dust protected Dust-tight
Definition No special protection A large surface of the body such as the hand (no protection against deliberate access). Solid objects exceeding 50mm diameter Fingers or other objects not exceeding 80 mm in length. Solid objects exceeding 12 mm diameter Tools, wires, etc of diameter or thickness greater than 2.5 mm. Solid objects exceeding 2.5 mm diameter. Wires or strips of thickness greater than 1.0 mm. Solid objects exceeding 1.0 mm Ingress of dust is not totally prevented but dust does not enter in sufficient quantity to interfere with satisfactory operation of the equipment No ingress of dust
Protection against liquids 2nd Description Digit Non-protected 0 1 2 3 4 5 6 7 Protected against dripping water Protected against dripping water when tilted up to 15
Vertically dripping water shall have no harmful effect when the enclosure is tilted at any angle up to 15 from its normal position Water falling as spray at an angle up to 60 from the Protected against spraying water vertical shall have no harmful effect Water splashed against the enclosure from any direction Protected against splashing water shall have no harmful effect Water projected from a nozzle against the enclosure Protected against water jets from any direction shall have no harmful effect Water from heavy seas or water projected in powerful Protected against heavy seas jets shall not enter the enclosure in harmful quantities Ingress of water in a harmful quantity shall not be Protected against the effects of possible when the enclosure is immersed in water under immersion defined conditions of pressure and time
The equipment is suitable for continuous submersion in water under conditions, which shall be specified by the manufacturer