Scribd
Upload
59 views

Methods For Producing Tetrahydrofuran

There are 5 main methods for producing tetrahydrofuran described in the document: 1. The furfural method which involves decarbonylation of furan and hydrogenation to furan. 2. Catalytic hydrogenation of maleic anhydride over a nickel catalyst which allows control of product ratios. 3. 1,4-butanediol dehydration cyclization using sulfuric acid as a catalyst which yields over 99% tetrahydrofuran but uses corrosive chemicals. 4. The 1,4-dichlorobutene method involving hydrolysis and hydrogenation to yield tetrahydrofuran with simple operation. 5. Butadiene oxidation and subsequent hydrogen

Uploaded by

frankieyouyouran
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as EHTML, PDF, TXT or read online on Scribd
59 views

Methods For Producing Tetrahydrofuran

There are 5 main methods for producing tetrahydrofuran described in the document: 1. The furfural method which involves decarbonylation of furan and hydrogenation to furan. 2. Catalytic hydrogenation of maleic anhydride over a nickel catalyst which allows control of product ratios. 3. 1,4-butanediol dehydration cyclization using sulfuric acid as a catalyst which yields over 99% tetrahydrofuran but uses corrosive chemicals. 4. The 1,4-dichlorobutene method involving hydrolysis and hydrogenation to yield tetrahydrofuran with simple operation. 5. Butadiene oxidation and subsequent hydrogen

Uploaded by

frankieyouyouran
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as EHTML, PDF, TXT or read online on Scribd
You are on page 1/ 2

Methods for producing tetrahydrofuran Tetrahydrofuran is a class of heterocyclic organic compounds.

It is one of the strongest polar ethers, it is used as a middle polarity solvent in chemical reaction and extraction. It is a colorless volatile liquid, similar to the ether, it soluble in water, alcohol, ether, acetone, benzene, most organic solvents. Tetrahydrofuran use widely in chemical industry, but do you know how to produce tetrahydrofuran? Now, I will show you 5 Methods for producing tetrahydrofuran. 1. Furfural method At first, furan is from furfural decarbonylation, than plus hydrogen into furan, after than we can get tetrahydrofuran. This is one of the earliest methods for industrial production of tetrahydrofuran. Furfural are mainly made of corn cob and other agricultural and sideline products by hydrolysis. This method pollute the environment seriously, it is not conducive to large-scale production, so it has been eliminated gradually now. 2.Catalytic hydrogenation of maleic anhydride Maleic anhydride and hydrogen pure into the interior of nickel catalyst from the bottom of the reactor, The ratio of tetrahydrofurans and gammabutyrolactones production can be controlled by adjusting the operating parameters. Reaction products and the raw material of hydrogen get into the bottom of the washing tower when they cool down to 50 . The unreacted hydrogen and gaseous separate from the liquid product, the unreacted hydrogen and the gaseous product are recycled to the reactor after washing. Tetrahydrofuran product will be distilled by the liquid product. The process can be in 0 ~ (5 1) within arbitrary adjustment of the ratio of butyrolactone and <a href=" http://www.guidechem.com/reference/dic2173.html ">tetrahydrofuran</a>, the conversion rate of maleic anhydride can be 100%, and the tetrahydrofuran selectivity can be 85% ~ 95%. The content of the product can reach 99.97%. The process has the characteristics of simple process, catalyst performance, less investment. 3.1,4- butanediol dehydration cyclization method This method is that inject the 22% concentration of sulfuric acid solution into 1, 4-butanediol in h igh-speed, then getting the aqueous tetrahydrofuran. This process of tetrahydrofuran yield can reach more than 99%, sulfuric acid as important catalyst in the reaction. This technology is mature, the process is simple, low reaction temperature, high yield of tetrahydrofuran, but sulfuric acid corrosive equipment, pollution of the environment. 4.1,4 two chlorobutene method The raw material is 1, 4- two chloride butene, first getting the butylene glycol through the hydrolysis, then getting the tetrahydrofuran from butylene glycol by catalytic hydrogenation. This method has the advantages of simple operation, mild condition, high yield, low catalyst consumption and continuous use. 5. Butadiene oxidation method The raw material is butadiene, first getting furan through the oxidation of butadiene and then hydrogenation of the product, so that we can obtain tetrahydrofuran. Now ,this method has been industrialized in foreign countries. In the article I have shown you 5 methods for producing tetrahydrofuran, I hope my

words will give you a little help. Thank you

Frankie is the freelance writer for e-commerce website in the chemistry. <a href="http://guidechem.com">Guidechem.com</a> is just a place for you to look for some chemicals. Our guidechem provide the most convenient conditions for the international buyers and let these leads benefit all the business people. Guidechem chemical B2B network provides information on china and global chemical market quotation and relative chemical Information. Guidechem Chemical Network providing the most complete information of the chemical industry.

You might also like