Scribd
Upload
129 views1 page

6922-520-XZ-DS-6019 - Rev A

MEDIUM voltage SQUIRREL CAGE INDUCTION motor PURCHASER's DATA 1 2 3 4 5 6 7 8 9 10 11 12 13 Rating: Manufacturer: BkW at full load: kW at end of curve: Speed: Rotation viewed from coupling end: kW kW RPM 9 torque required, starting: maximum: including flywheel: excluding flywheel: kg mkg 2 kgm kgm2 kg kg Driven equipment

Uploaded by

kanchithalai
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
129 views1 page

6922-520-XZ-DS-6019 - Rev A

MEDIUM voltage SQUIRREL CAGE INDUCTION motor PURCHASER's DATA 1 2 3 4 5 6 7 8 9 10 11 12 13 Rating: Manufacturer: BkW at full load: kW at end of curve: Speed: Rotation viewed from coupling end: kW kW RPM 9 torque required, starting: maximum: including flywheel: excluding flywheel: kg mkg 2 kgm kgm2 kg kg Driven equipment

Uploaded by

kanchithalai
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MEDIUM VOLTAGE SQUIRREL CAGE INDUCTION MOTOR PURCHASER's DATA

A. Site conditions 1 Ambient temperature, minimum: maximum: design: 45 46.1 1 85 C C C % 3 4 5 6

Datasheet No. 6922-520-XZ-DS-6019 Rev : A Page 1 of 1

Atmospheric condition: Humid & highly corrosive < 1000 m Altitude: Location: Outdoor

2 B. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Relative humidity: Technical particulars Motor tag no.: Driven equipment name: Voltage: Phase: Frequency: Fault level: Method of starting: Winding connection: No.of terminals: Cable size: Cable type: Temperature rise: Cooling: Insulation class:

415 V 10%

50 Hz

Three 3% 50 kA DOL Delta 6

Hazardous area classification: Gas group: Type of explosion protection: Type of ingress protection: Color shade: Required 21 Thermisters: Required 22 RTD:
Required 23 BTD: 24 RTD/BTD monitoring device:

16 17 18 19 20

IP 55 632 as per IS 5
Not required Not required

mm Cu/Al cond. PVC insulated C B / F with temp rise limited to Class B.

Not required Required


Not required

Make: EIL spec. 6-51-0032 25 Applicable specification: 26

DRIVEN EQUIPMENT MANUFACTURER's DATA


1 2 3 4 5 6 7 8 Suggested motor rating: Manufacturer: BkW at full load: kW at end of curve: Speed: Rotation viewed from coupling end: Driven equipment: Coupling type: kW kW kW RPM 9 Torque required, starting: maximum: including flywheel: excluding flywheel: mkg mkg 2 kgm kgm2 kg kg

10 GD2 of eqpt eqpt., 11 Thrust,

up: down: 12 Starting condition:

MOTOR MANUFACTURER's DATA


1 2 3 4 5 6 7 8 9 10 11 12 13 Rating: Manufacturer: No. of poles: Frame designation: Full load speed: Mounting: Full load torque (FLT): Starting torque: Break down or pull out torque: Full load current (FLC): Starting current at 100% voltage: Rotation viewed from coupling end: 75% voltage: Starting time at, 100% voltage: 14 Locked rotor withstand time (cold/hot) at, 75% voltage: 100% voltage: 15 Space heater - voltage & power: 75% voltage: 100% voltage: 17 Power factor at, starting: 100% load: RPM 18 Moment of inertia, GD 2: 19 NDE bearing type & no.: mkg 20 DE bearing type & no.: % of FLT 21 Type of lubrication: % 22 Weight of motor: A 23 Thermisters, quantity: % of FLC make: type: 24 RTD, quantity: sec. make: type: sec. 25 BTD, quantity: make: type: sec. 26 Shaft voltage: sec. 27 Critical speed, 1st/2nd stage: 28 Canopy for outdoor motors: Required kW 16 Efficiency at, % %

kgm2

kg no. no. no. V RPM

Not required

1. Recommended list of maintenance spares for two years operation shall include the follwing as minimum: a) Bearing DE/NDE - one set b) Terminal box cover with screws c) Fan d) Terminal block 2. Starting time calculations shall be based on operating conditions specified on Material Requisition eg. open valve ccondition/ closed valve condition, at no load/full load, as applicable.

3. All unfilled data shall be filled by contractor/ vendor.

A Rev. No.

26.05.2008 Date

ISSUED FOR BIDS Purpose

MHR Prepared by

PB Checked by

PB Approved by

Format No. 1650-687 Rev.3

Copyrights EIL - All rights reserved

You might also like