DENMARK

PASSENGER SHIP SAFETY CERTIFICATE

This certificate shall be supplemented by a Record of Equipment (Form P) an 1 for international voyage a short Issued under the provisions of the INTERNATIONAL CONVENTION FOR THE SAFETY OF LIFE AT SEA, 1974, as modified by the Protocol of 1988 relating thereto under the authority of the Government of The Kingdom of Denmark by Particulars of ship 2 Name of ship Distinctive number or letters Port of registry Gross tonnage Sea areas in which ship is certified to operate (regulation IV/2) IMO Number 3 Date of build: Date of building contract Date on which keel was laid or ship was at similar stage of construction Date of delivery Date on which work for a conversion or an alteration or modification of a major character was commenced (where applicable) DANISH MARITIME AUTHORITY

All applicable dates shall be completed.

1 2

Delete as appropriate. Alternatively, the particulars of the ship may be placed horizontally in boxes. 3 In accordance with IMO ship identification number scheme adopted by the Organization by resolution A.600(15).

THIS IS TO CERTIFY: 1. That the ship has been surveyed in accordance with the requirements of regulation I/7 of the Convention. That the survey showed that: 2.1 the ship complied with the requirements of the Convention as regards: .1 the structure, main and auxiliary machinery, boilers and other pressure vessels; .2 the watertight subdivision arrangements and details; .3 the following subdivision load lines;
Subdivision load lines assigned and marked on the ship's side at amidships (regulations II-1/18 4 ) To apply when the spaces in which passengers are carried include the following alternative spaces

2.

Freeboard

P.1 P.2 P.3

2.2 the ship complied with the requirements of the Convention as regards structural fire protection, fire safety systems and appliances and fire control plans; 2.3 the life-saving appliances and the equipment of the lifeboats, liferafts and rescue boats were provided in accordance with the requirements of the Convention; 2.4 the ship was provided with a line-throwing appliance and radio installations used in life-saving appliances in accordance with the requirements of the Convention; 2.5 the ship complied with the requirements of the Convention as regards radio installations;

For ships constructed before 1 January 2009, the applicable subdivision notation C.1, C.2 and C.3 should be used.

2.6 the functioning of the radio installation used in life-saving appliances complied with the requirements of the Convention; 2.7 the ship complied with the requirements of the Convention as regards shipborne navigational equipment, means of embarkation for pilots and nautical publications; 2.8 the ship was provided with lights, shapes, means of making sound signals and distress signals, in accordance with the requirements of the Convention and the International Regulations for Preventing Collisions at Sea in force; 2.9 in all other respects the ship complied with the relevant requirements of the Convention; 2.10 the ship was/was not 5 subjected to an alternative design and arrangements in pursuance of regulation(s) II-1/55 / II-2/17 / III/385 of the Convention; 2.11 a Document of approval of alternative design and arrangements for machinery and electrical installations/fire protection/life-saving appliances and arrangements5 is/is not5 appended to this Certificate. 3. That an Exemption Certificate has/has5 not been issued.

This certificate is valid until

Completion date of the survey on which this certificate is based

(dd/mm/yyyy)

Issued at
(Place of issue of certificate)

(Date of issue)

(Signature of authorized official issuing the certificate)

Delete as appropriate.

(Seal or stamp of the issuing authority, as appropriate)

Endorsement where the renewal survey has been completed and regulation I/14(d) applies The ship complies with the relevant requirements of the Convention, and this certificate shall, in accordance with regulation I/14(d) of the Convention, be accepted as valid until

Signed:
(Signature of authorized official)

Place:

Date:
(Seal or stamp of the issuing authority, as appropriate)

Endorsement to extend the validity of the certificate until reaching the port of survey or for a period of grace where regulation I/14(e) or I/14(f) applies This certificate shall, in accordance with regulation I/14(e)/I/14(f)1 of the Convention, be accepted as valid until

Signed:
(Signature of authorized official)

Place:

Date:
(Seal or stamp of the issuing authority, as appropriate)

DENMARK RECORD OF EQUIPMENT FOR THE PASSENGER SHIP SAFETY CERTIFICATE (Form P) This Record shall be permanently attached to the Passenger Ship Safety Certificate

RECORD OF EQUIPMENT FOR COMPLIANCE WITH THE INTERNATIONAL CONVENTION FOR THE SAFETY OF LIFE AT SEA, 1974 as modified by the Protocol of 1988 relating thereto
1 Particulars of ship

Name of ship Distinctive number or letters Number of passengers for which certified Minimum number of persons with required qualifications to operate the radio installations 2 1 Details of life-saving appliances Total number of persons for which life-saving appliances are provided Port side 2 2.1 2.2 Total numbers of lifeboats Total numbers of persons accommodated by them Number of partially enclosed lifeboats (regulation III/2 1 and LSA Code, section 4.5) 2.3 Number of totally enclosed lifeboats (regulation III/2 1 and LSA Code, section 4.6) 2.4 Other lifeboats 2.4.1 Number 2.5.2 Type Starboard side

2 3 3.1 4. 4.1 5 5.1

Details of life-saving appliances (continued) Number of motor lifeboats included in the total lifeboats shown above Number of lifeboats fitted with searchlights Number of rescue boats Number of boats which are included in the total lifeboats shown above

Liferafts Those for which approved launching appliances are required 5.1.1 Number of liferafts 5.1.2 Number of persons accommodated by them 5.2 Those for which approved launching appliances are not required 5.2.1 Number of liferafts 5.2.2 Number of persons accommodated by them 6 6.1 6.2 7 8 9 9.1 9.2 10 11 Buoyant apparatus Number of apparatus Number of persons capable of being supported Number of lifebuoys Number of lifejackets Immersion suits Total number Number of suits complying with the requirements for lifejackets Number of thermal protective aids 1 Radio installations used in life-saving appliances

11.1 Number of search and rescue locating devices 11.1.1 Radar search and rescue transponders (SART) 11.1.2 AIS search and rescue transmitters (AIS-SART) 11.2 Number of two-way VHF radiotelephone apparatus

Excluding those required by LSA Code paragraphs 4.1.5.1.24, 4.4.8.31 and 5.1.2.2.13.

Bilag 1A 7

Details of radio facilities Item Actual provision

1 1.1 1.1.1 1.1.2 1.1.3 1.2 1.2.1 1.2.2 1.2.3 1.3

Primary systems VHF radio installation DSC encoder DSC watch receiver Radiotelephony MF radio installation DSC encoder DSC watch receiver Radiotelephony MF/HF radio installation

1.3.1 DSC encoder 1.3.2 DSC watch receiver 1.3.3 Radiotelephony 1.3.4 Direct-printing radiotelegraphy 1.4 2 3 3.1 3.2 3.3 4 4.1 4.2 5 6 6.1 6.2 INMARSAT ship earth station Secondary means of alerting Facilities for reception of maritime safety information NAVTEX receiver EGC receiver HF direct-printing radiotelegraph receiver Satellite EPIRB COSPASS-SARSAT INMARSAT VHF EPIRB Ships search and rescue locating device Radar search and rescue transponder (SART) AIS search and rescue transmitter (AIS-SART)

Bilag 1A 8

4 4.1 4.2 4.3

Methods used to ensure availability of radio facilities (regulations IV/15.6 and 15.7) Duplication of equipment Shore-based maintenance At-sea maintenance capability

Details of navigational systems and equipment Item Actual provision

1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.1 2.2 2.3 2.4 3.1 3.2 3.3 3.4 3.5 3.6 3.7 4.1 4.2
1

Standard magnetic compass 1 Spare magnetic compass1 Gyro-compass1 Gyro-compass heading repeater1 Gyro-compass bearing repeater1 Heading or track control system1 Pelorus or compass bearing device1 Means of correcting heading and bearings Transmitting heading device (THD)1 Nautical charts/Electronic chart display and information system (ECDIS) 2, 1 Back-up arrangements for ECDIS Nautical publications Back-up arrangements for electronic nautical publications Receiver for a global navigation satellite system/terrestrial radionavigation system2, 1 9 GHz radar1 Second radar (3 GHz/9 GHz2) 1 Automatic radar plotting aid (ARPA)1 Automatic tracking aid Second automatic tracking aid Electronic plotting aid1 Automatic identification system (AIS) Long-range identification and tracking system

Alternative means of meeting this requirement are permitted under regulation V/19. In case of other means they shall be specified. Delete as appropriate.

Bilag 1A 9

Details of navigational systems and equipment (continued) Item Actual provision

5 6.1 6.2 7 8.1 8.2 9 10 11 12 13 14

Voyage data recorder (VDR) Speed and distance measuring device (through the water) 1 Speed and distance measuring device (over the ground in the forward and athwartship direction)1 Echo-sounding device1 Rudder, propeller, thrust, pitch and operational mode indicator1 Rate-of-turn indicator1 Sound reception system1 Telephone to emergency steering position1 Daylight signaling lamp1 Radar reflector1 International Code of Signals Bridge navigational watch alarm system (BNWAS)

THIS IS TO CERTIFY that this Record is correct in all respects Issued at

(Place of issue of the Record)

(Date of issue)

(Signature of authorized official issuing the Record) (Seal or stamp of the issuing authority, as appropriate)

Alternative means of meeting this requirement are permitted under regulation V/19. In case of other means they shall be specified.

Bilag 1A 10