Scribd
Upload
436 views

KDT

This document provides information on the Kirloskar 'KDT+' Series Two Stage Pumps including: 1. The pumps have a head capacity ranging from 8-102 metres and flow rate ranging from 0.4-19.5 litres per second, powered by motors from 0.75 kW to 15 kW. 2. Standard materials of construction include cast iron for the impeller and delivery casing, carbon steel for the motor body, and bronze for the shaft sleeve. 3. Performance specifications and models are listed for pumps operating at various voltages, frequencies, and power ratings.

Uploaded by

apandey070273
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
436 views

KDT

This document provides information on the Kirloskar 'KDT+' Series Two Stage Pumps including: 1. The pumps have a head capacity ranging from 8-102 metres and flow rate ranging from 0.4-19.5 litres per second, powered by motors from 0.75 kW to 15 kW. 2. Standard materials of construction include cast iron for the impeller and delivery casing, carbon steel for the motor body, and bronze for the shaft sleeve. 3. Performance specifications and models are listed for pumps operating at various voltages, frequencies, and power ratings.

Uploaded by

apandey070273
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Kirloskar 'KDT+' Series Two Stage Pumps

High Speed, Horizontal, Centrifugal, Monobloc with Volute Type Delivery Casing.

Range
Head Capacity Power Rating : : : 8-102 metres. 19.5-0.4 litres per second. 0.75 kW to 15.0 kW (1.0 HP to 20.0 HP)

Material of Construction
Standard Supply Impeller Delivery Casing Motor Body Shaft Shaft Sleeve : Cast Iron : Cast Iron : Cast Iron : Carbon Steel : Bronze

KDT +
Monobloc Pumps
48 50 RATED VOLTAGE (VOLTS) 210 400 400 415 400 400 415 415 415 415 415 415 415

Enriching Lives

Direction of Rotation
Anticlockwise, when viewed from suction side.

Optional Supply Impeller Shaft Shaft Sleeve : Bronze : Stainless Steel : Chrome Steel
CM/L-0803240 IS : 9079

Approximate performance of 'KDT+' series, 2 pole, monobloc pumps at rated voltage, 50Hz, Three Phase, A.C. power supply
POWER RATING kW HP 1.0 5.0 7.5 10.0 5.0 7.5 10.0 12.5 12.5 PIPE SIZE (mm) SUC. DEL. 40 65 80 80 50 65 65 65 65 65 65 80 65 32 50 65 65 34 KDT-568+ KDT-864+ 3.7 5.5 40 50 50 50 65 50 65 65 19.5 18.6 17.8 16.7 15.6 14.3 12.8 10.8 12.8 12.3 11.7 11.2 10.5 9.8 9.0 8.0 7.0 5.5 38 42 46 50 54 58 62 4.4 4.2 3.9 3.5 3.1 2.7 2.3 1.7 7.5 7.1 6.7 6.3 5.8 5.2 4.6 3.6 7.9 7.6 7.2 6.9 6.4 5.9 5.2 4.4 3.3 7.0 6.7 6.3 5.9 5.5 5.0 4.5 3.8 11.4 10.8 10.3 9.8 9.2 8.6 8.0 7.4 6.7 5.8 4.8 3.2 7.2 6.8 6.5 6.1 5.7 5.3 4.8 4.2 8 10 12 14 16 18 20 22 TOTAL HEAD IN METRES 24 26 28 30 32 34 36 38 40 42 44 46

PUMP MODEL

CAPACITY IN LITRES PER SECOND 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.6 0.5 0.4 7.1 6.8 6.5 6.2 5.9 5.6 5.2 4.8 4.2 3.5 13.0 12.6 12.2 11.8 11.3 10.9 10.4 10.0 9.5 9.0 8.3 7.5 14.4 14.1 13.8 13.5 13.2 12.8 12.4 12.0 11.5 11.0 10.5 9.8 9.2 8.5 66 70 74 78 82 86 90 94 98 102

KDT-135+* 0.75 KDT-544+ KDT-844+ 3.7 5.5

KDT-1050+ 7.5

KDT-1078+ 7.5 KDT-1372+ 9.3 KDT-1388+ 9.3

65 11.8 11.2 10.7 10.1 9.5 8.9 8.1 7.4 6.5 5.3 3.7

KDT-1580+ 11.0 15.0 KDT-1598+ 11.0 15.0 KDT-2070+ 15.0 20.0 KDT-2095+ 15.0 20.0

*KDT-135+ is supplied for single phase A.C. power supply. However, it can also be supplied for three phase A.C. power supply against the requirement. All pumpsets except KDT-568+ and KDT-844+ are ISI marked. Note : Performance applicable to liquid of specific gravity 1 and viscosity as of water.

Regd. Office : Udyog Bhavan, Tilak Road, Pune - 411 002. Tel. : (020) 4444444. Fax : (020) 4444198. Works : Ujjain Road, Opp. Railway Station, Dewas - 455 001. Tel. : (07272) 27310-27312 Fax : (07272) 28747. E-mail : [email protected]

As we are constantly endeavouring to improve the performance of our products / equipment, we reserve the right to make alterations from time to time, and so, our products/equipment may differ from that detailed in this publication. For latest information, you may get in touch with us.

Features n Withstand wide voltage fluctuations: From 180-240 Volts (For single phase), From 300-440 Volts (For three phase). n Suction lift upto 7.5 metres. n Top flat efficiency curve: minimum variation in efficiency in entire operating range. n Higher overall efficiency as compared to equivalent single stage pump. n Back to back mounting of impellers results in zero axial thrust and hence longer bearing life. n Models are with IP-44 protection. Models with IP-55 protection are also available on request. n Class of insulation 'B' ('F' class for 9.3 kW and 11.0 kW rating). n Dynamically balanced rotating parts ensure minimum vibrations. n Replaceable wearing parts and hence longer life. n Designed to prevent overloading and motor burning. n Designed for automatic air release during priming. Applications n Sprinkler / conventional irrigation. n Industries, for clear water supply at high pressure. n Water supply for domestic use in Apartments, Building and Hotels. n Refrigeration and air-conditioning systems.

Area Offices/ Phones : t Ahmedabad/ 6583258 t Bangalore/ 3619914 t Bhubaneshwar/ 535371 t Kolkata/ 2827619 t Chennai/ 8156546 t Indore/ 436567, 68 t Jaipur/ 361434 t Kochi/ 206651 t Lucknow/ 226494 t Mumbai/ 5289320 t Nagpur/ 238178 t New Delhi/ 3361485 t Pune/ 5412475 t Ranchi/ 308184 t Secunderabad/ 7894595
KDT+-080200

You might also like