Scribd
Upload
1K views

4

This summary provides the questions asked in four multiple choice questions, the answers selected, and the correct answers. In the first question, the selected answer stated to attach the tug through the center lead ahead, while the correct answer was to attach astern. The second question asked about tug power distribution for sideways ship movement, and the selected answer was equal power while the correct answer specified more power to the forward tug. The third question was about VHF channels for intership communications, and 16 was selected while 13 was correct. The fourth question asked about testing intervals for lifting appliances, and annually was selected instead of the correct answer of 5 years.

Uploaded by

Palmas4
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

4

This summary provides the questions asked in four multiple choice questions, the answers selected, and the correct answers. In the first question, the selected answer stated to attach the tug through the center lead ahead, while the correct answer was to attach astern. The second question asked about tug power distribution for sideways ship movement, and the selected answer was equal power while the correct answer specified more power to the forward tug. The third question was about VHF channels for intership communications, and 16 was selected while 13 was correct. The fourth question asked about testing intervals for lifting appliances, and annually was selected instead of the correct answer of 5 years.

Uploaded by

Palmas4
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Wrong answer summary

Question asked (369): A large tanker is proceeding slowly up a narrow channel, using its own engines and assisted by the use of one tug. Where should the tug be connected to assist the ship in maintaining its course in the centre of the channel?

Selected answer: Made fast on a line through the centre lead ahead. Correct answer: Made fast on a line through the centre lead astern.

Question asked (833): In the situation illustrated, what should be the distribution of the power requirements from the tugs, if the ship is to be moved sideways without changing the heading? Both tugs have similar bollard pull and are of conventional propulsion.

Selected answer: Equal power required by both tugs, but monitor the gyro heading to ensure sideward movement only

Correct answer: Much greater power on the forward tug than on the after tug while monitoring the gyro heading Question asked (1903):

Which VHF channel should be used for intership navigation safety communications? Selected answer: Ch.16 Correct answer: Ch.13

Question asked (2067): At what calendar interval must lifting appliances on board a vessel be suitably tested by a competent person?

Selected answer: Annually. Correct answer: 5 years.

Question asked (2262):

Page 1/8

You might also like