10CTQ150
Uploaded by
tarpino10CTQ150
Uploaded by
tarpino10CTQ150
Vishay High Power Products
Schottky Rectifier, 2 x 5 A
FEATURES
Base 2 common cathode
175 C TJ operation Center tap configuration Low forward voltage drop High frequency operation
High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance
Anode Anode 2 1 Common 3 cathode
TO-220AB
Guard ring for enhanced ruggedness and long term reliability Designed and qualified for industrial level
DESCRIPTION PRODUCT SUMMARY
IF(AV) VR 2x5A 150 V
This center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 s sine 5 Apk, TJ = 125 C (per leg) Range CHARACTERISTICS Rectangular waveform VALUES 10 150 620 0.73 - 55 to 175 UNITS A V A V C
VOLTAGE RATINGS
PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM 10CTQ150 150 UNITS V
ABSOLUTE MAXIMUM RATINGS
PARAMETER Maximum average forward current See fig. 5 per leg IF(AV) per device 5 s sine or 3 s rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR Following any rated load condition and with rated VRRM applied 50 % duty cycle at TC = 155 C, rectangular waveform 10 620 A 115 6.75 0.30 mJ A SYMBOL TEST CONDITIONS VALUES 5 A UNITS
Maximum peak one cycle non-repetitive surge current per leg See fig. 7 Non-repetitive avalanche energy per leg Repetitive avalanche current per leg
TJ = 25 C, IAS = 0.30 A, L = 150 mH Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical
Document Number: 93194 Revision: 22-Aug-08
For technical questions, contact: [email protected]
www.vishay.com 1
This datasheet has been downloaded from http://www.digchip.com at this page
10CTQ150
Vishay High Power Products Schottky Rectifier, 2 x 5 A
ELECTRICAL SPECIFICATIONS
PARAMETER SYMBOL 5A Maximum forward voltage drop per leg See fig. 1 VFM
(1)
TEST CONDITIONS TJ = 25 C
VALUES 0.93 1.10 0.73 0.86 0.05 7 0.468 28 200 8.0 10 000
UNITS
10 A 5A 10 A
TJ = 125 C VR = Rated VR
Maximum reverse leakage current per leg See fig. 2 Threshold voltage Forward slope resistance Maximum junction capacitance per leg Typical series inductance per leg Maximum voltage rate of change Note (1) Pulse width < 300 s, duty cycle < 2 %
IRM (1) VF(TO) rt CT LS dV/dt
TJ = 25 C TJ = 125 C TJ = TJ maximum
mA V m pF nH V/s
VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 C Measured lead to lead 5 mm from package body Rated VR
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case per leg Maximum thermal resistance, junction to case per package Typical thermal resistance, case to heatsink (only for TO-220) Approximate weight minimum maximum Case style TO-220AB SYMBOL TJ, TStg TEST CONDITIONS VALUES - 55 to 175 3.50 RthJC DC operation 1.75 RthCS Mounting surface, smooth and greased 0.50 2 0.07 6 (5) 12 (10) g oz. kgf cm (lbf in) C/W UNITS C
Mounting torque Marking device
10CTQ150
www.vishay.com 2
For technical questions, contact: [email protected]
Document Number: 93194 Revision: 22-Aug-08
10CTQ150
Schottky Rectifier, 2 x 5 A
Vishay High Power Products
100
100
IF - Instantaneous Forward Current (A)
IR - Reverse Current (mA)
10 1 0.1 0.01 0.001 0.0001
TJ = 175 C TJ = 150 C TJ = 125 C TJ = 100 C TJ = 75 C TJ = 50 C TJ = 25 C
10
TJ = 175 C TJ = 125 C TJ = 25 C
1 0 0.5 1.0 1.5 2.0 2.5 3.0
25
50
75
100
125
150
VFM - Forward Voltage Drop (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg)
VR - Reverse Voltage (V)
Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg)
1000
CT - Junction Capacitance (pF)
100 TJ = 25 C
10
20
40
60
80
100
120
140
160
VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg)
ZthJC - Thermal Impedance (C/W)
10
1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Single pulse (thermal resistance) 0.001 0.00001
PDM t1 t2
0.1
0.01
Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.001 0.01 0.1 1 10
.
100
0.0001
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
Document Number: 93194 Revision: 22-Aug-08
For technical questions, contact: [email protected]
www.vishay.com 3
10CTQ150
Vishay High Power Products Schottky Rectifier, 2 x 5 A
180 5
Allowable Case Temperature (C)
170 160 150 140 130 See note (1) 120 0 2 4 Square wave (D = 0.50) 80 % rated VR applied
Average Power Loss (W)
DC
D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS limit DC
0 6 8 0 1 2 3 4 5 6 7 8
IF(AV) - Average Forward Current (A)
Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg)
IF(AV) - Average Forward Current (A)
Fig. 6 - Forward Power Loss Characteristics (Per Leg)
IFSM - Non-Repetitive Surge Current (A)
1000
At any rated load condition and with rated VRRM applied following surge
100
10
100
1000
10 000
tp - Square Wave Pulse Duration (s)
Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg)
L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V
D.U.T.
IRFP460 Rg = 25
Current monitor
Fig. 8 - Unclamped Inductive Test Circuit Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 10 V
www.vishay.com 4
For technical questions, contact: [email protected]
Document Number: 93194 Revision: 22-Aug-08
10CTQ150
Schottky Rectifier, 2 x 5 A
Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
10
1 1 2 3 4 5 6 -
C
2
T
3
Q
4
150
5
Current rating (10 = 10 A) Circuit configuration C = Common cathode
Package T = TO-220
Schottky Q series Voltage rating (150 = 150 V) None = Standard production PbF = Lead (Pb)-free
Tube standard pack quantity: 50 pieces
LINKS TO RELATED DOCUMENTS Dimensions Part marking information http://www.vishay.com/doc?95222 http://www.vishay.com/doc?95225
Document Number: 93194 Revision: 22-Aug-08
For technical questions, contact: [email protected]
www.vishay.com 5
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishays terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1
