Scribd
Upload
49 views

Gehr Kynar Halar

The document discusses two fluoropolymers, Kynar (PVDF) and Halar (ECTFE). It provides information on their characteristics, applications, available stock sizes, and properties. Kynar has high strength and chemical resistance while Halar has high impact strength at low temperatures.

Uploaded by

Elambarithi Kalyanakumar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
49 views

Gehr Kynar Halar

The document discusses two fluoropolymers, Kynar (PVDF) and Halar (ECTFE). It provides information on their characteristics, applications, available stock sizes, and properties. Kynar has high strength and chemical resistance while Halar has high impact strength at low temperatures.

Uploaded by

Elambarithi Kalyanakumar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Kynar / Halar

GEHR PVDF (Kynar)


Polyvinylidene fluoride shows a higher tensile strength, pressure resistance and dimensional stability than the related PTFE, but friction and insulation properties are lower. PVDF has a high mechanical strength and toughness at lower temperature and its self-extinguishing. The temperature ranges from -22 F to +300 F. Characteristics: high tensile strength high mechanical strength high chemical resistance low water absorption good friction and wear and tear values self-extinguishing high UVresistance toxic fumes when burned can not be solvent cemented FDA compliant excellent radiation resistance excellent barrier properties material of choice for high purity fluid handling

Applications: Pumps, rotation disks, valves, fittings, glide tracks, cog wheels, chemical processing.

PVDF ECTFE

GEHR ECTFE (Halar)


Ethylen-Chlortrifluorethylene exhibits an extraordinary impact strength at temperatures ranging from -104 F to +302 F. A great part of the product properties attributes to the very smooth surface and differentiates HALAR from other fluoropolymers. Due to the fact that E-CTFE is very pure, this material is being used to process chemicals and ultrapure water for the semiconductor industry. Also the permeation resistance to oxygen, carbon dioxide, chlorine gas and hydrochlorid acid is 10 to 100 times better than PTFE. Characteristics: extremely high impact strength (up to -105 F) no break on notched or unnotched IZOD impact test good insulation properties very good weather resistance high resistance to radiation very high chemical resistance self-extinguishing very good sliding properties food safe high density limited protection against stress cracking at temperatures > 284 F Applications: Parts which come in contact with aggressive materials (machinery building industry), lining of tanks, pumps, flanges, fittings, parts in centrifuges and control engineering industry etc...

20

Kynar / Halar
GEHR-Round Rods

Kynar
Stock Lengths: 1/4 - 2 = 8 ft 2 1/8 - 8 = 4 ft 9 and above = 1 meter Lengths: + tolerances
inch 1/4 3/8 1/2 5/8 3/4 7/8 1 1 1/8 1 1/4 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/8 2 1/4 2 1/2 2 3/4 3 3 1/4 3 1/2 3 3/4 4 4 1/4 4 1/2 5 6 0.250 0.375 0.500 0.625 0.750 0.875 1.000 1.125 1.250 1.500 1.625 1.750 1.875 2.000 2.125 2.250 2.500 2.750 3.000 3.250 3.500 3.750 4.000 4.250 4.500 5.000 6.000 7.000 8.000 10.000 12.000 Tol. -0 + 0.010 + 0.015 + 0.020 + 0.025 + 0.030 + 0.035 + 0.040 + 0.045 + 0.050 + 0.060 + 0.065 + 0.070 + 0.075 + 0.080 + 0.085 + 0.090 + 0.100 + 0.110 + 0.120 + 0.130 + 0.140 + 0.150 + 0.160 + 0.170 + 0.180 + 0.200 + 0.240 + 0.280 + 0.320 + 0.400 + 0.500 GEHR Kynar PVDF lbs/ft 0.039 0.085 0.151 0.237 0.341 0.464 0.606 0.767 0.947 1.360 1.605 1.860 2.137 2.420 2.745 3.090 3.790 4.580 5.410 6.422 7.420 8.550 9.800 10.982 12.290 15.150 21.820 30.000 40.000 89.500 61.000 + 0.135 + 0.150 11.460 14.720 + 0.120 9.420 + 0.105 7.960 + 0.090 6.500 + 0.067 + 0.075 3.250 3.830 + 0.060 2.750 + 0.052 2.180 + 0.037 + 0.045 1.250 1.450 + 0.030 0.608 + 0.023 0.342 + 0.015 0.147 Tol. -0 GEHR Halar ECTFE lbs/ft

Halar/ECTFE
Stock Lengths: 1/2 - 5 = 4 ft Lengths: + tolerances Colors: natural

available ex stock

7 8 10

Custom extrusion - time of delivery on request

12

Centerless grinding possible

GEHR-Sheets
Tol.

Stock Lengths: 620 mm: 1000 mm 1000 mm: 40 mm: 1000/2000 mm 50 mm: 1000 mm Lengths: + tolerances Colors: natural
1/4 3/8 1/2 5/8 3/4 7/8 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 3 1/4
All indicated weights base on average production weights.

inch 0.250 0.375 0.500 0.625 0.750 0.875 1.000 1.250 1.500 1.750 2.000 2.250 2.500 2.750 3.000 3.250 3.500 3.750 4.000

-0

lbs/ft 3.734 5.586 7.448

+ 0.025

9.310 11.172 14.896 18.620 22.344 26.068 29.792 33.516 37.240 40.964 44.688 48.411 52.135 55.859 59,583 13.034

+ 0.050

3 1/2 3 3/4 4

+ 0.075

21

PEEK

Polysulfone ULTEM

GEHR Kynar-PVDF 24 x 48

PVDF ECTFE

Acetal

ABS/Noryl

Acrylic

Polyolefins

PVC

You might also like