Scribd
Upload
233 views

Piping Materials

This document provides material recommendations for different pipe systems in a power plant. It recommends stainless steel and rubber lined steel for demineralized water pipes up to 50mm in size. For condensate and feedwater systems up to 50mm, it recommends carbon steel. For steam piping systems, it recommends different grades of steel and stainless steel depending on the operating temperature range, with higher grades specified for higher temperatures from 400-595 degrees C.

Uploaded by

libid_raj
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
233 views

Piping Materials

This document provides material recommendations for different pipe systems in a power plant. It recommends stainless steel and rubber lined steel for demineralized water pipes up to 50mm in size. For condensate and feedwater systems up to 50mm, it recommends carbon steel. For steam piping systems, it recommends different grades of steel and stainless steel depending on the operating temperature range, with higher grades specified for higher temperatures from 400-595 degrees C.

Uploaded by

libid_raj
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Service condition

Pipe Size range upto 50 NB

Recommended pipe material ASTM A 312 TP 304/TP316 IS 1239 Heavy class and lined with rubber of 3mm thickness IS 3589 Fe410 + 3 mm rubber lining or fabricated from IS 2062 Gr. E250

Recommended flange material

Recommended fitting material (bend, reducer, tee etc.) Upto 50 NB A182 Gr. F 304

Recommended valve material

DM WATER SYSTEM

65 to 150 NB >150 NB

65 to 200 NB - A 105 > 200 NB - fab. from IS 2062 Gr. E 250 plate

>65 NB-ASTM A234 Gr. WPB

> 65 NB - ASTM A216 Gr. WCB

Upto 50 NB - A 105 CONDENSATE SYSTEM (upto feed pump suction) All sizes ASTM A106 Gr. B All sizes - A 105 > 65 NB A234 Gr. WPB

> 65 NB - A216 Gr. WCB

Upto 50 NB - A 105 FEED WATER SYSTEM (from feed pump discharge to boiler) All sizes ASTM A106 Gr. B (for discharge pr. upto 150 kgf/cm2) ASTM A106 Gr. C (for discharge pr. more than 150 kgf/cm2)

All sizes - A 105

> 65 NB A234 Gr. WPB (for Gr. B pipe) or WPC (for Gr. C pipe);

> 65 NB - A216 Gr. WCB (for Gr. B pipe) or WCC (for Gr. C pipe)

Upto 400oc: A106 Gr. B

All sizes - A 105

Upto 50 NB - A 105; >65 NB-A234 Gr. WPB > 65 NB - A216 Gr. WCB > 65 NB - A 217 Gr. WC6 > 65 NB- A 217 Gr. WC9 > 65 NB - A 217 Gr. C12 A

STEAM PIPING SYSTEMS (main steam piping, extraction steam piping, hot and cold reheat piping)

400-510oc: A335 P11 All sizes 510-550oc: A335 P22

All sizes-A 182 Gr. F 11 All sizes-A 182 Gr. F 22 All sizes-A 182 Gr. F 91

Upto 50 NB A 182 Gr. F 11; > 65 NB- A 234 Gr. WP 11 > 65 NB- A 234 Gr. WP 22 > 65 NB- A 234 Gr. WP 91

Upto 50 NB A 182 Gr. F 22;

Upto 50 NB A 182 Gr. F 91;

550-595oc: A335 P91

You might also like