Scribd
Upload
575 views

Kommando RCVR

The document contains technical drawings of a mechanical part, showing its dimensions, tolerances, and materials specifications. Key details include outer diameters of 1.375 and 1.273 inches for a steel tubing component, lengths ranging from 0.23 to 13.06 inches for various features, and a note specifying the material as 1022 drawn over mandrel steel tubing. Tolerances are provided for most dimensional measurements.

Uploaded by

Mike Nichlos
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
575 views

Kommando RCVR

The document contains technical drawings of a mechanical part, showing its dimensions, tolerances, and materials specifications. Key details include outer diameters of 1.375 and 1.273 inches for a steel tubing component, lengths ranging from 0.23 to 13.06 inches for various features, and a note specifying the material as 1022 drawn over mandrel steel tubing. Tolerances are provided for most dimensional measurements.

Uploaded by

Mike Nichlos
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

6.

16 in

Ø0.5 in

0.23 in

0.812 in 2.875 in 0.687 in 1.562 in 0.75 in


5.062 in
13.06 in
A B 1.25 in
2.314 in 1 in

0.25 in
Thread 1 3/8 - 12

0.787 in 0.625 in 0.787 in 0.968 in

A B .250" X .312" Pin Material: 4130 or 4140


Typical

R0.05 in Typical

0.125 in

5.2 in 2.537 in

Material: 1.375 OD x 1.273 ID 1022 DOM Steel Tubing

Tab
0.312 in

R0.1 in Typical
0.562 in

No Interior
0.75 in Weld
Typical

Ø1.375 in
Tab Thickness .093 Ø1.273 in
Material: 4130 or 4140
Section A - A
Rotated CCW 90 Deg
Section B - B
Rotated CCW 90 Deg
A K-100

You might also like