Scribd
Upload
191 views

Lab 1.2 Troubleshooting PPP (2.5.3)

CCNA Exploration Accessing the WAN: PPP lab 2.5.3: Troubleshooting PPP Configuration. Using your knowledge of PPP and standard testing methods, find and correct network errors. Make sure that all of the serial links use PPP CHAP authentication.

Uploaded by

Miguel Jimenéz
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
191 views

Lab 1.2 Troubleshooting PPP (2.5.3)

CCNA Exploration Accessing the WAN: PPP lab 2.5.3: Troubleshooting PPP Configuration. Using your knowledge of PPP and standard testing methods, find and correct network errors. Make sure that all of the serial links use PPP CHAP authentication.

Uploaded by

Miguel Jimenéz
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Lab 2.5.

3: Troubleshooting PPP Configuration


Topology Diagram

Addressing Table Device Interface


Fa0/1 R1 S0/0/0 S0/0/1 Lo0 R2 S0/0/0 S0/0/1 R3 Fa0/1

IP Address
10.0.0.1 172.16.0.1 172.16.0.9 209.165.200.161 172.16.0.2 172.16.0.5 10.0.0.129

Subnet Mask
255.255.255.128 255.255.255.252 255.255.255.252 255.255.255.224 255.255.255.252 255.255.255.252 255.255.255.128

Default Gateway
N/A N/A N/A N/A N/A N/A N/A
Page 1 of 6

All contents are Copyright 19922007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

CCNA Exploration Accessing the WAN: PPP

Lab 2.5.3: Troubleshooting PPP Configuration

S0/0/0 S0/0/1 PC1 PC3 NIC NIC

172.16.0.10 172.16.0.6 10.0.0.10 10.0.0.139

255.255.255.252 255.255.255.252 255.255.255.128 255.255.255.128

N/A N/A 10.0.0.1 10.0.0.129

Learning Objectives
To complete this lab: Cable a network according to the topology diagram Erase the startup configuration and reload a router to the default state Load routers with scripts Find and correct network errors Document the corrected network

Scenario
The routers at your company were configured by an inexperienced network engineer. Several errors in the configuration have resulted in connectivity issues. Your boss has asked you to troubleshoot and correct the configuration errors and document your work. Using your knowledge of PPP and standard testing methods, find and correct the errors. Make sure that all of the serial links use PPP CHAP authentication, and that all of the networks are reachable.

Task 1: Load Routers with the Supplied Scripts


R1 enable configure terminal ! hostname R1 ! ! enable secret class ! ! ! no ip domain lookup ! username R2 password 0 cisco ! ! ! interface FastEthernet0/0 ip address 10.0.0.1 255.255.255.128 shutdown duplex auto speed auto ! interface FastEthernet0/1 duplex auto
All contents are Copyright 19922007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 6

CCNA Exploration Accessing the WAN: PPP

Lab 2.5.3: Troubleshooting PPP Configuration

speed auto ! interface Serial0/0/0 ip address 172.16.0.1 255.255.255.248 no fair-queue clockrate 64000 ! interface Serial0/0/1 ip address 172.16.0.9 255.255.255.252 encapsulation ppp ppp authentication pap ! router ospf 1 log-adjacency-changes network 10.0.0.0 0.0.0.127 area 0 network 172.16.0.4 0.0.0.3 area 0 network 172.16.0.8 0.0.0.3 area 0 ! ip classless ! ip http server ! ! control-plane ! banner motd ^CUnauthorized access strictly prohibited and prosecuted to the full extent of the law^C ! line con 0 exec-timeout 0 0 password cisco logging synchronous login line aux 0 line vty 0 4 password cisco login ! end R2 enable configure terminal ! hostname R2 ! ! enable secret class ! ! no ip domain lookup ! username R11 password 0 cisco username R3 password 0 class ! !
All contents are Copyright 19922007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 6

CCNA Exploration Accessing the WAN: PPP

Lab 2.5.3: Troubleshooting PPP Configuration

! interface Loopback0 ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1 ip address 209.165.200.161 255.255.255.224 shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 172.16.0.2 255.255.255.252 encapsulation ppp no fair-queue ppp authentication chap ! interface Serial0/0/1 ip address 172.16.0.5 255.255.255.252 ! router ospf 1 log-adjacency-changes network 172.16.0.0 0.0.0.3 area 0 network 172.16.0.4 0.0.0.3 area 0 network 209.165.200.128 0.0.0.31 area 0 ! ip classless ! ip http server ! ! control-plane ! banner motd ^CUnauthorized access strictly prohibited and prosecuted to the full extent of the law^C ! line con 0 exec-timeout 0 0 password cisco logging synchronous login line aux 0 line vty 0 4 password cisco login ! end R3 enable configure terminal !
All contents are Copyright 19922007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 6

CCNA Exploration Accessing the WAN: PPP

Lab 2.5.3: Troubleshooting PPP Configuration

hostname R3 ! ! enable secret class ! ! no ip domain lookup ! username R1 password 0 cisco username R3 password 0 ciscco ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1 ip address 10.0.0.129 255.255.255.0 duplex auto speed auto ! interface Serial0/0/0 ip address 172.16.0.10 255.255.255.252 no fair-queue clockrate 64000 ! interface Serial0/0/1 encapsulation ppp ppp authentication pap ! router ospf 1 log-adjacency-changes network 10.0.0.128 0.0.0.127 area 0 network 192.16.0.4 0.0.0.3 area 0 network 192.16.0.8 0.0.0.3 area 0 ! ip classless ! ip http server ! ! control-plane ! banner motd ^CUnauthorized access strictly prohibited and prosecuted to the full extent of the law^C ! line con 0 exec-timeout 0 0 password cisco logging synchronous login line aux 0 line vty 0 4 password cisco login
All contents are Copyright 19922007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 6

CCNA Exploration Accessing the WAN: PPP

Lab 2.5.3: Troubleshooting PPP Configuration

! end

Task 2: Find and Correct Network Errors Task 3: Document the Corrected Network
Now that you have corrected all errors and tested connectivity throughout the network, document the final configuration for each device.

Task 4: Clean Up
Erase the configurations and reload the routers. Disconnect and store the cabling. For PC hosts that are normally connected to other networks, such as the school LAN or the Internet, reconnect the appropriate cabling and restore the TCP/IP settings.

All contents are Copyright 19922007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Page 6 of 6

You might also like