Specifications

DL-101C/102C
ELECTRONIC DIGITAL LEVEL
Faster Automatic Measurement
DL-101C DL-102C
When used with TOPCON’s unique patterned staff, height
TELESCOPE
and distance can be automatically determined digitally by

DL-101C/102C
Magnification 32× 30×
the DL-101C/102C. Objective Aperture 45mm
You just aim the staff, focus, and press the measurement Field of view 1°20’
button. It’s that simple! The results appear in the clearly Resolving power 3”
COMPENSATOR
visible display window after about three seconds.
Working Range
Setting Accuracy
±12’
±0.3”
±15’
±0.5”
ELECTRONIC DIGITAL LEVEL
HEIGHT MEASUREMENT
Accuracy (Standard deviation for 1km doubie-run levelling)
Electronic reading 0.4mm w/Invar staff 1.0mm w/Fiberglass staff
Optical reading 1.0mm 1.5mm
Least Count 0.1mm/0.01mm 1mm/0.1mm
DISTANCE MEASUREMENT
Least Count 1cm/1mm 1cm
Accuracy 1cm to 5cm
MEASURING RANGE 2m to 100m : Fiberglass staff
2m to 60m : Invar staff
MEASURING TIME Approx. 3 sec.
CIRCULAR LEVEL SENSITIVITY 8’/2mm 10’/2mm
Highly Accurate Measurements OTHERS
The fully automatic measuring ability and digital display of Display 2-line, 8-digit per line. Dot matrix LCD with backlight
the DL-101C/102C excludes any reading errors, writing Data Storage Compact Flash card(TYPE I) Maximam Capacity : 2GB
Internal memory approx. 6,000 data
mistakes in the field book, and other possible human-made
Data Ttansmission RS-232C port provided
errors. Consequently, the electronic measurement data is Keyboard Alphanumeric input
always more precise and more reliable as compared to the Timer Built-in timer
conventional visual measurement. Horizontal Circle 360°or 400gon
Power Supply Rechargeable Battery BT-31Q
[Option: AA size dry cell battery holder DB-3]
Operating Time 12 hours (BT-31Q Rechargeable Battery)
[12 hours (Dry cell – Alkaline)]
Ambient Temperature Range –20°C to +50°C [–4°F to +122°F]
Dimensions 237(D)×196(W)×141(H)mm
Weight 2.8 kg [6.16 lbs] (including on-board battery)
Data Card based on Conpact Flash

• Designs and specifications herein are subject to change without notice.

Important：In order to obtain the best results with this instrument,
please be sure to review all user instructions prior to operation.
Onboard Software
BF-FB Measurement
In DL101C/102C in addition to the general procedure of
Backsight→Foresight, it corresponds to the observation Barcode Staff
procedure of BF-FB and BB-FF measurement.
Inverse Staff Mode
When heights of elevated points are required to be measured
eg. For ceiling heights, or in tunnels etc., the DL-101C/102C Aluminum staff SA-5M Length: 5.0m (Telescopic, 3 sections)

TheRTKからDGPSまで
Fiberglass staff SG-3M Length: 3.0m (1.5m × 2 pcs.)
can measure the height from the ceiling points with staff
Reverse face Graduation: 1cm with 5mm pattern “Electronic Eye” Makes
inverted, using the “reverse reading” mode.
Invar staff SI-3 Length: 3.0m 観測フィールドを選ばない
Error-Free Measurements,
Increases Speed, Accuracy
ハンドヘルドGNSS受信機
and Productivity!!

TOPCON CORPORATION
• Faster Automatic Measurement
75-1 Hasunuma-cho, Itabashi-ku, Tokyo 174-8580, Japan
Phone: (+81)3-3558-2993/2947 Fax: (+81)3-3960-4214
• Highly AccurateMeasurements
www.topcon.co.jp
• CF Memory Card System
<Contact to>
SG-5M SG-3M SI-3
TOPCON CORPORATION DUBAI OFFICE • On-board software
L.I.U.unit# J-12, Dubai Airport Free Zone
P.O.Box 293705, Dubai, U.A.E. Your local Authorized Topcon Dealer is:
Phone: +971-4-299-5900 Fax: +971-4-299-5901
• Screen Backlight
Middle East & Africa
Email : [email protected]
Web : www.topcon.co.jp (Corporate Info) www.topconmembers.com/a email: [email protected] • Bar-code staff
www.topconpositioning.com (Product Info)

Specifications subject to change without notice

©2009 Topcon Corporation All rights reserved.
Printed in Japan 2009 06 P-00-1 Dubai