Scribd
Upload
243 views

SimulatorHW MidSize dSPACE Catalog 2008

The dSPACE Simulator Mid-Size is a hardware-in-the-loop simulator for testing automotive electronic control units mounted in a 19-inch desktop rack. It uses DS2202 or DS2211 input/output boards and additional modules to generate and measure signals, simulate loads and failures. The simulator can be expanded with extra I/O boards and signal conditioning modules and is controlled via a connected host PC running dSPACE software.

Uploaded by

Ram Krishan Sharma
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
243 views

SimulatorHW MidSize dSPACE Catalog 2008

The dSPACE Simulator Mid-Size is a hardware-in-the-loop simulator for testing automotive electronic control units mounted in a 19-inch desktop rack. It uses DS2202 or DS2211 input/output boards and additional modules to generate and measure signals, simulate loads and failures. The simulator can be expanded with extra I/O boards and signal conditioning modules and is controlled via a connected host PC running dSPACE software.

Uploaded by

Ram Krishan Sharma
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Simulator Hardware

dSPACE Simulator Mid-Size1)


Standardized, off-the-shelf HIL simulator based on DS2202 or DS2211 HIL I/O Board

Key Features

Installation in a compact 19 desktop rack Signal conditioning with DS2202 or DS2211 HIL I/O Board Load cards 1- or 2-voltage system

Failure insertion units for electrical failure simulation Expandable with additional I/O boards and signal conditioning Expandable to multiprocessor and multirack systems

Description

Hardware Details dSPACE Simulator Mid-Size is a ready-to-use, standard hardware-in-the-loop (HIL) simulator for systematically and automatically testing automotive ECUs. The hardware of dSPACE Simulator Mid-Size is mounted in a 19 desktop rack (height: 6 12 HU). The simulation model runs on the processor board. dSPACE Simulator Mid-Size generates and measures I/O signals via the DS2202 or DS2211 HIL I/O Board, which also performs the signal conditioning. Additional I/O and signal conditioning can be added on request.

Typical Fields of Application Engine, transmission, vehicle dynamics and body electronics HIL Open-loop or closed-loop environment Realistic software system tests/unit tests Function integration tests Acceptance tests on diagnostic functions Automated testing

Connection to Host PC All dSPACE software (p. 127) for experiment setup and control or test automation runs on your PC or notebook. The dSPACE Simulator hardware is connected to your PC via link boards (ISA, PCMCIA, or PCI, p. 426).

1)

Devices connected to the dSPACE HIL system, for example, electronic control units, can feed in high currents and high voltages (voltages over 60 V DC or 30 V ACRMS), which can be dangerous for the user. This can happen, for example, in systems for piezoelectric or hybrid applications. Such currents and voltages can result in property damage, personal injury, or death. Under all circumstances, you must observe all the safety precautions described in the documentation. Please contact dSPACE for additional safety-related equipment, such as electrically safe interface cables.

460
2008 Catalog 2008 dSPACE Technologiepark 25 33100 Paderborn Germany [email protected] www.dspace.com

dSPACE Simulator Mid-Size

Hardware Summary
Hardware Form factor Processor hardware I/O hardware Further I/O hardware Signal conditioning Substitute loads Real-load connector Failure insertion unit for actuator signals Failure insertion unit for sensor signals Integration of additional signal conditioning Integration of third-party hardware, e.g., load panels ECU connectors Break-out box OBDII diagnostic connector / connection to diagnostic tools Truck-application-capable (24 V/36 V) 42 V-capable Power supply (remote-controlled)
included

Description
19 desktop rack DS1005 PPC Board or DS1006 Processor Board DS2202 HIL I/O Board or DS2211 HIL I/O Board


Three 90-pin connectors Additional connectors for additional I/O optional

Sub-D connector with optional CARB adapter CAN connector

optional

Examples of Enclosure Variants


dSPACE Simulator Mid-Size DS1005 PPC Board or DS1006 Processor Board DS2202 HIL I/O Board or DS2211 HIL I/O Board Failure insertion units for actuator signals Load cards Power supply Second power supply Free ISA slots for expansion Height units
included optional not available

Small Variant (6 HU)

Standard Variant (12 HU)

(1 x)

1 (PX5 version, only for

(2 x)
2 (PX10 version) 12

DS1005 PPC Board) 6

461
Catalog 2008 dSPACE Technologiepark 25 33100 Paderborn Germany [email protected] www.dspace.com 2008

Simulator Hardware

Hardware Components

Signal Conditioning On-board for DS2202/DS2211 HIL I/O Board signals Up to two spare slots for additional signal conditioning (e.g., current measurement for diesel and stratied injection applications, lambda probe simulation or signal conditioning for additional I/O boards)

Load Capabilities Five load cards (per load/FIU unit), 10 single-ended loads or 5 double-ended loads each Connection of electrically equivalent loads or low-power resistor loads (2 W maximum continuous power per load) 6 A maximum load current per pin (real loads) LED indicators displaying current load states (display mode selectable) Front connector for measurement or connection of real loads

Unit with FIUs, load cards, external connection of real loads Spare slot for additional signal conditioning Modular hardware: processor board and I/O board with signal conditioning

ECU connectors Adapter for OBDII connector Remote-controlled power supply (battery simulation)

Power Supply Simulation of car battery Programmable switched-mode power supply Remote-controlled 42 V and truck-capable: 0 50 V voltage range Three switched battery rails for each battery voltage, e.g., main relay, ECU-controlled high rail 16 A maximum current for each rail of rst battery voltage 6 A maximum current for each rail of second battery voltage

VBAT Jacks Provides power voltage of both power supplies for external devices (e.g., external test or diagnostic devices) 4 mm sockets

462
2008 Catalog 2008 dSPACE Technologiepark 25 33100 Paderborn Germany [email protected] www.dspace.com

dSPACE Simulator Mid-Size

Other Hardware Components Break-out box (optional)

Hardware Components

Expandability Up to two HIL I/O Boards Integration of additional dSPACE I/O board possible Signal conditioning for additional I/O boards

Inclusion of real loads, additional, or

customer-specic signal conditioning


Customer-specic modications/

extensions possible

Failure Insertion Units A standard dSPACE Simulator Mid-Size supports electrical failure simulation on all ECU output pins connected to the HIL I/O Board. A hardware extension allows electrical failures to be simulated on ECU inputs as well. The host PC controls both types of failure simulation via an RS232 interface. ECU outputs (per load/FIU unit): Five DS791 failure insertion units (FIUs) with 10 channels, connected to all 50 actuator channels. (If no FIU is required, it can optionally be replaced with ve DS792 Fuse Cards.) ECU inputs: optional, via hardware extension (DS793 Base Board and DS794 FIU Modules)

Remote-controlled with ControlDesk

Failure Simulation and automated with AutomationDesk Cable break simulation (open wire) Simulation of short circuits: from ECU pins to ground or battery voltages Simulation of cross-wired short circuits between ECU pins via common fail planes Simultaneous activation of multiple failures (latch mode) dSPACE Simulator Mid-Size is also available without FIU cards on request.

Failure Simulation Overview


Actuator-FIU FIU cards No. of cards per load/FIU unit No. of channels per card Switch type Max. continuous current Possible failure types Cable break Short circuit to ground Short circuit to battery voltage VBAT1 or VBAT2 Short circuit to another ECU pin via common plane Simulation of loose contact or switch bouncing
included not available

Sensor-FIU (Optional)
DS793/DS794 Up to 2 Up to 81 CMOS switch 0.5 A

DS791 5 10 Relay 6A

463
Catalog 2008 dSPACE Technologiepark 25 33100 Paderborn Germany [email protected] www.dspace.com 2008

You might also like