USER'S GUIDE

2 3 4-5 6 6-16 17-19 20 21

42U7, 18Z7 SERIES 220-240V

Thank You Safety Instructions Product View Assembly Operations Maintenance and Care Troubleshooting Replacement Parts Accessories Warranty Consumer Services

22 23 24

Thanks for buying a BISSELL CleanView Deep Clean

Were glad you purchased a BISSELL CleanView Deep Clean heated formula deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL CleanView Deep Clean is well made, and we back it with a limited five year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, youll receive fast, considerate assistance. My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your BISSELL CleanView Deep Clean. Thanks again, from all of us at BISSELL.

Mark J. Bissell Chairman, President & CEO

www.bissell.com

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including the following:

Remove plug from electrical outlet before

cleaning or maintaining the appliance

Read all instructions before using your deep cleaner.

Always connect to a properly Earthed outlet. Unplug from outlet when not in use and before conducting maintenance or troubleshooting.

Not intended for use by persons (including

To reduce the risk of fire, electric shock, or injury:

Use indoors only Do not immerse; use only on surfaces
moistened by cleaning process

WARNING:

Do not leave machine when it is plugged in Do not service machine when it is plugged in If the supply cord is damaged, it must

be replaced by the manufacturer or its service agent in order to avoid a hazard Do not use machine if it has been dropped, damaged, left outdoors or dropped into water Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces Do not carry the appliance while in use Do not unplug by pulling on cord; unplug by grasping plug not the cord Do not handle plug or appliance with wet hands Do not put any object into appliance openings, use with blocked opening or restrict air flow Do not expose hair, loose clothing, fingers or body parts to openings or moving parts Do not pick up hot or burning objects Do not pick up flammable or combustible materials (lighter fluid, petrol, kerosene, etc.) or use in the presence of explosive liquids or vapours Do not use appliance in an enclosed space filled with vapours given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapours Do not operate the appliance unless the belt door is securely assembled in the location provided

This model is for household use only.

SAVE THESE INSTRUCTIONS FOR FUTURE USE

children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Young children should be supervised to ensure that they do not play with the appliance Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, petrol, etc.) Do not modify the Earthed plug Do not use for any purpose other than described in this Users Guide Use only manufacturers recommended attachments Use only cleaning products formulated by BISSELL for use in this appliance to prevent internal component damage Keep openings free of dust, lint, hair, etc. Keep appliance on a level surface Turn off all controls before unplugging Be extra careful when cleaning stairs Pay close attention when working around children

This appliance WARNING: must be Earthed. IMPORTANT FOR OPERATION ON A 220-240 VOLT
A.C. 50/60 Hz POWER SUPPLY ONLY. If your appliance is fitted with a nonrewireable BS 1363 plug it must not be used unless a 13 amp (ASTA approved to BS 1362) fuse is fitted in the carrier contained in the plug. (Spares may be obtained from your BISSELL supplier). If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard should it be inserted into a 13 amp socket.

www.bissell.com

Product view
CleanShot Trigger Tough Stain Brush Spray Trigger

Custom Clean Dial Heater Switch

Power Switch Extra Long Power Cord

Flex Hose Upper Handle

Easy Carry Handle Heat Indicator Light

Tank Carry Handle ReadyTools Dial 2-in-1 Water Tank CleanShot Lower Base Dry Aire Easy To Remove Nozzle Edge Sweep Brushes

www.bissell.com

Product view
Spray Trigger

Upper Hose Rack

Hose secure Latch

Crevice Tool Holder Lower Hose Rack

WARNING: To reduce the risk of fire and

Detent Pedal Formula Tank electric shock due to internal component damage, use only BISSELL cleaning formulas intended for use with the deep cleaner. Non-BISSELL cleaning formulas may harm the machine and void the warranty.

Cleaning formula:
Keep plenty of genuine BISSELL 2X cleaning formula on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning formulas may harm the machine and will void the warranty.

1.5 L 2X Wash & Protect Professional Formula w/ Scotchgard Protector #81L5-E

1.5 L 2X Wash & Protect Pet Stain & Odour Formula w/ Scotchgard Protector #66W9-E

1.5 L 2X Wash & Protect Fresh Fragrance Formula w/ Scotchgard Protector #92F4-E

Note: Additional BISSELL formula options may be available at your local retailer.
www.bissell.com

1.5 L 2X Wash & Protect Spring Breeze Fragrance Formula w/ Scotchgard Protector #12W4-E

1.5 L 2X Wash & Protect Lavender Fragrance Formula w/ Scotchgard Protector #33D2-E

473 mL 2X Hard Floor Solutions #56L9-E

651 mL Tough Stain Precleaner #0400-E

Assembly
Your CleanView Deep Clean comes in three, easy to assemble components: Upper Handle Lower Handle Tool Caddy The only thing you will need to assemble your cleaner is a Phillips head screwdriver. 1. Slide upper handle onto lower handle. 2. Screw 3 screws into the marked holes. 3. Place upper hose rack onto back of upper handle, and secure with screw. 4. Place lower hose rack onto back of upper handle by pushing in and sliding down until it snaps into place. 5. Snap tools into the tool caddy. 6. Wrap power cord and flex hose. 7. Keep flex hose snugly in place by using the hose secure latch.
7. 1. 2.

3.

4.

Hose Secure Latch

Operations
Special features
Your BISSELL CleanView Deep Clean is a home cleaning system that uses the power of heat, brushes and cleaning formula to get the deep down dirt for a maximum clean. Not only does it come with a lot of unique features, it has been designed with you, the customer, in mind.

Built-in-heater feature
BISSELL CleanView Deep Clean models all feature a patented built-in heater which will heat the hand hot tap water you put in up to 14 C hotter to safely optimise cleaning effectiveness. The heater will never allow the temperature to exceed 82 C. The heater switch on the front of the machine controls the heater so you have the option to turn off the heat if you are cleaning delicate wool or oriental rugs.

www.bissell.com

Operations
Custom Clean
The Custom Clean feature automatically mixes hand hot tap water with the BISSELL 2X formula. Simply choose one of the 4 settings (heavy traffic, normal clean, light clean, or water rinse) and the CleanView Deep Clean will adjust the right amount of cleaning solution to mix with the heated water to fit your cleaning need.

CleanShot
The CleanShot feature gives you the ability to tackle tough stains with the push of a button. Cleaning solution is sprayed in a concentrated stream, penetrating the stain and allowing for better cleaning focus. Simply spray and suction and the stain is gone! CleanShot is especially effective for spots and stains that would otherwise take a lot of deep cleaning cycles to remove. It allows the cleaning formula and machine to do the work for you.

(located on upper handle) Flow Indicator

DryAire
The Dry Aire system spreads hot air across the carpet to aid in drying. The feature runs while your machine is powered.

Flow indicator
The flow indicator is located on the rear cover of your unit. When the unit runs out of water or solution the flow indicator will instantly let you know

CleanShot

2-in-1 water tank

Our 2-in-1 water tank full capacity system is designed with a heavy duty bladder inside for clean water. As you clean, the clean water in the bladder will empty and mix with the cleaning formula. Dirty water pulled out of your carpets will collect around the outside of the bladder so that clean and dirty water are always kept separate. This allows the user to only carry one tank to and from the sink for emptying and filling.

Dry Aire

Microban antibacterial protection

Microban antibacterial protection helps prevent the growth of harmful common household bacteria including E. coli, Salmonella and Staph. a. It helps to keep the unit fresher and cleaner between uses.

www.bissell.com

Operations
ReadyTools dial
This provides either floor cleaning or above floor cleaning with the turn of a knob. Choose "TOOLS" setting for stairs, upholstery and hard to reach areas and "FLOOR CLEANING" for carpets area rugs and bare floors.

Scotchgard Protector
Carpet protection applied at the mill typically wears down over time from heavy foot traffic and everyday cleaning, including deep cleaning. To help restore this important protection, only BISSELL offers deep cleaning formulas with Scotchgard protector. This offers extra protection against dirt and tough stains to keep your carpets looking good longer.

www.bissell.com

Operations
Before you clean
1. Move furniture to another area if cleaning an entire room (optional). 2. Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning. 3. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit. 4. Pretreating (optional) Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryways and hallways. Option A: BISSELL Tough Stain Precleaner A. Spray the BISSELL Tough Stain Precleaner formula onto heavy traffic areas, soiled areas, or stains. B. Allow to penetrate for at least 3 minutes. C. Clean as normal, using the BISSELL CleanView Deep Clean machine on the high traffic setting, following the instructions below. Option B: CleanShot Follow instructions on page 12.
EXIT
BRUSH SUCTION

12

11
6

10
7

9
1

2
3

ATTENTION: Some Berber carpets have a

tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggravate this condition. Please see Stain Removal instructions on page 15 .

ER RT E 4'

S H TA

3'

www.bissell.com

Operations
Carpet cleaning
1. Fill the 2-in-1 Water Tank. Remove the tank from the base of the machine by lifting up the tank carry handle. Carry like a bucket to the sink. 1a. Unlatch the top of the tank from the bottom by lifting up on the tank latch located on the back of the tank. 1b. Remove the top of the tank by lifting up 1b. on the handle.
Note how the lip on the top tank separates from the groove in the bottom tank. This placement is important when putting the tank back together.
1c. 1. 1a.

1c. Fill the heavy duty bladder with clean hand hot tap water. *Do not boil or microwave water 1d. as it can destroy the bladder. 1d. Leaving the filled bottom of the tank on a flat surface, only maneuver the top of the tank. To attach the top part of the tank to the bottom, carefully hook the lip on the top tank into the groove on the bottom tank. 1e. Fasten tanks together by securing the latch in the back.
2.

1e.

Note: Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank.

3.

2. Remove formula tank from back of machine. 3. Fill the formula tank by first unscrewing the cap and insert. Always use genuine BISSELL 2X formulas to maximize cleaning and for the safety of your machine. Fill with water to WATER line and then fill up to FORMULA line with BISSELL 2X formula. Replace formula tank. 4. Set Custom Clean Dial. Simply choose one of the 4 settings (heavy traffic, normal clean, light clean, or water rinse). 5. Set ReadyTools Dial to the floor cleaning setting.
4. 5.

10

www.bissell.com

Operations
Carpet cleaning continued
6. Plug into a proper outlet and turn the power and heater switches to the ON ( I ) position. Allow 1 minute for the built-in heater to warm-up before cleaning. The CleanView Deep Clean will be fully warmed and will provide optimal performance after a minute of continuous heated cleaning. 7. Cleaning Strokes. While pressing the trigger, make one slow forward wet pass and another one back. Caution: Do not overwet. Take care not to run over loose objects or edges of area rugs. Stalling brush may result in premature belt failure.
Note: Your machine is equipped with a circuit breaker that will automatically shut off the brush if a large or loose object is caught in the brush roll. If that happens, be sure to unplug your machine, remove the foreign object, and then plug the machine back in to reset the circuit breaker.
6.

Power Switch

Heater Switch

WARNING: To reduce the risk of due to internal

component damage, use only BISSELL cleaning formulas intended for use with the deep cleaner.

Release the trigger and make one slow forward and backward pass over the same area to remove any residual dirty water and aid in drying. Repeat cleaning passes until solution being pulled up appears clean. Continue passes without pressing the trigger until you cant see any more water being pulled up. 8. Remove the tank from the base of the 8. machine by lifting up on the tank carry handle. Carry like a bucket to a utility sink or outside where you will dispose of the dirty water. 8a. Unlatch the top of the tank from the bottom by lifting up on the tank latch located on the back of the tank. 8b. Remove the top of the tank by lifting up on the handle.
Note how the lip on the top tank separates from the groove in the bottom tank. This placement is important when putting the tank back together.

8a.

8b.

www.bissell.com

11

Operations
Carpet cleaning continued
8c. Lift the bottom portion of the tank; pour out dirty water in the sink through the triangular shaped opening in the corner of the tank.
Note: You may notice hair & debris deposits on the carpet or in the tank that were loosened by the cleaning action. This debris should be picked up and thrown away.

Keep plenty of genuine BISSELL 2X formula on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning formulas may harm the machine and void the warranty.

8d. Fill the heavy duty bladder with clean 8c. hand hot tap water, following instructions 1c through 1e on page 10.
Note: Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank. Always check the level of cleaning formula in the formula tank at the same time, and refill as needed.

9. Water rinse (optional). Rinsing is an option- 8d. al step that can be done during the cleaning process or after the carpeted area has been completed. Switch to the water rinse setting, on the Custom Clean dial and follow the same path as you did for cleaning. Take care to do a forward (wet) stroke by depressing the trigger, and a backward (wet) stroke, followed by a forward and backward (dry) stroke, releasing the trigger. Continue this until the water you see coming up the nozzle is clear. 10. CleanShot. CleanShot is an optional feature that can be used to fight tough stains. It can be used as either a tough stain pre-treat 10B. or can be used during the deep cleaning process itself. To use CleanShot either as a pre-treat or during deep cleaning, follow the instructions below. A. Set Custom Clean for the desired setting. B. Press the CleanShot button and aim the focused stream onto the stain. Allow the formula to soak in for 30 seconds. C. Run the machine over the stain to extract. Repeat as needed until the stain is gone. D. Rinse if desired.

9.

CleanShot

12

www.bissell.com

Operations
Cleaning with attachments
Your CleanView Deep Clean machine comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more. 1. Important! If using to clean upholstery, check upholstery tags. A. Check manufacturers tag before cleaning. W or WS on the tag means you can use your deep cleaner. If the tag is coded with an X or an S (with a diagonal stripe through it), or says Dry Clean Only, do not proceed with any deep cleaning machine. Do not use on velvet or silk. If manufacturers tag is missing or not coded, check with your furniture dealer. B. Check for colourfastness in an inconspicuous place. C. If possible, check upholstery stuffing. Coloured stuffing may bleed through fabric when wet. D. Plan activities to allow upholstery time to dry. E. Vacuum thoroughly to pick up loose debris and pet hair. Use a vacuum with a brush attachment and a crevice tool to clean in fabric folds. 2. Follow the instructions on page 10 for filling the 2-in-1 water tank and the formula tank. 3. Set ReadyTools dial to the "TOOLS" setting. This will allow spray and suction from the hose. 4. Set custom clean dial for heavy traffic, normal clean, light clean, or water rinse as desired. 5. Attach the cleaning tool to the end of the hose. 6. Plug in and turn on the power switch and heater (if desired). 7. Clean by pressing the spray trigger to spray solution onto the area to be To cleaned. Slowly move the tool back and reduce the risk of injury, be extra forth over the soiled surface. Release careful when cleaning stairs. Make the spray trigger to suction soiled water. sure machine is secure and level. Continue to clean in the area, working in small sections, until no more dirt can be removed. Rinse (optional) and suction as needed. Caution: Do no overwet.
www.bissell.com

Manufacturers tag

bvh g kvh gh j j h d b lg fd hn l kl sd jkn f h Ad bj jh b j cv hh gcg

5.

WARNING:

13

Operations
Cleaning with attachments continued
8. Remove and rinse tools in clean, running water. Dry and replace in the tool caddy. 9. It is recommended that you suction clean water from a bowl to rinse out the hose. 10. Before replacing lift end of hose and stretch out to ensure all water is cleared from hose. 11. Coil flex hose around the tool caddy. 12. Empty 2-in-1 water tank and rinse out, following the instructions on pages 11 through 12. 13. Return ReadyTools dial to floor setting. Cleaning with Deep Reach Tool (select models only) 1. 1. Set tool on soiled surfaces and press the spray trigger to spray solution onto the soiled area to be cleaned. 2. Slowly move the tool back and forth over the soiled surface, keeping the tool in contact with the carpet. Release spray trigger and move tool slowly over the soiled area to suction up water and dirt. 4. Continue to clean the area, working in small sections, until no more dirt can be removed.
10.

3.

14

www.bissell.com

Operations
Stain removal
Do Not Delay! Attending to an accident soon after it occurs ensures the most optimal clean. Leaving it for an extended period of time may cause it to set and become permanent. 1. Blot up liquids with an absorbent cloth or paper towels. White materials are recommended because certain dyes may bleed and make the stain worse. 2. Gently scrape up any semi-solids with a spoon or spatula. Do not use a knife or other utensil with sharp edges because it could damage the carpet or upholstery. 3. If the area has dried, remove the remaining semi-solids and residue with a sweeper or vacuum. 4. Be sure to test any spot removal formulas in an inconspicuous area first. This is important as some dyes and materials could be damaged or discolored by cleaning solvents. If such a change should occur, try a different solution or call a professional. 5. If cleaning on Berber carpeting, gently run your machine over a hidden area. If no fuzzing occurs, continue cleaning in soiled area. 6. Using the BISSELL Tough Stain Precleaner, spray evenly over soiled area. Do not overwet. Wait 3-5 minutes. Gently work the solution by blotting area with a clean, damp, color safe cloth. 7. CleanShot. CleanShot is an optional feature that can be used to fight tough stains. It can be used as either a tough stain pre-treat or can be used during the deep cleaning process itself (see page 12). 8. Clean using either the FLOOR CLEANING, or TOOLS setting on the ReadyTools dial.

www.bissell.com

15

Operations
Hard floor cleaning
Your CleanView Deep Clean model may have come with a hard floor tool and 2X Hard Floor Solutions Formula. The hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors. Caution: Do not use on unsealed hardwood floors. 1. Vacuum or sweep thoroughly to pick up any loose debris and pet hair. 2. Move any furniture, if needed. 3. Fill the formula tank to "WATER" line with water. Fill to "FORMULA" line with BISSELL 2X Hard Floor Solutions. 4. Fill the 2-in-1 water tank with hot tap water and set aside. 5. Attach the hard floor tool onto the bottom of the machine by hooking it into the nozzle and swinging it down until it clicks into place. 6. Set ReadyTools dial to the "FLOOR CLEANING" setting. 7. Set the Custom Clean dial to normal clean. 8. Plug into an outlet and turn the power switch and heater ON ( I ). 9. Slowly move the machine forward and back over hard floor surface one time while depressing spray trigger. Caution: Do not overwet. 10. Repeat the motion without pressing the spray trigger using the hard floor tool to squeegee and suction up the dirty water. 11. Allow adequate time for floors to dry. 12. Remove hard floor tool, rinse and dry before storing. 13. Rinse out the formula tank.

WARNING:

To reduce the risk of fire and electric shock- when cleaning a hard floor, the BISSELL hard floor tool 203-6692 must be used and it must only be used with BISSELL Hard Floor Solutions or BISSELL 2X Hard Floor Solutions cleaning formula intended for use with this appliance.

WARNING : To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.
5.

16

www.bissell.com

Maintenance and care

Machine storage
Once your cleaning is complete, make sure the 2-in-1 water tank is emptied, rinsed out, and dried before the next use. The formula tank can remain filled and ready to go.
Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty.

WARNING: To reduce the risk of

fire, electric shock or injury unplug from outlet before servicing.

Machine care
For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete. 1. Flush your machine of any remaining residual solution. A. Fill the 2-in-1 clean water tank with clean hot tap water. B. Plug your machine into a proper outlet and set the Custom Clean dial to the rinse setting. Turn the power on by pressing the power button. C. Recline the handle and press the spray trigger for 15 seconds while making forward and backward passes on carpet. Release the trigger to suction. Repeat for another 15 seconds. Continue without pressing the trigger until there is no more water being suctioned. 2. Turn power and heater switches OFF (O). Unplug the machine and wrap the power cord. Empty the 2-in-1 water tank. 3. Rinse out 2-in-1 water tank, with running hot tap water, taking care to clean underneath the heavy duty bladder, and all around it. 4. The top half of the tank can be rinsed clean through the nozzle area. Also, pop out the red filter underneath the top half of the tank and rinse out. Replace before putting the top and bottom halves of the tank together. 5. Before you place the cleaned 2-in-1 water tank back onto the machine, simply unscrew the floor nozzle using a Phillips head screwdriver. This can be rinsed out at the faucet. Then replace back onto the machine by starting from the bottom of the nozzle and hooking the tabs into the holes on the bottom sides of the machine. Secure into place with the screw.
www.bissell.com

Tip:
3&4

Let all parts dry completely before storing

Filter

17

Maintenance and care

Machine care continued
6. The inside of the end caps by the brush rolls can be wiped out with a clean paper towel, or, if a more thorough cleaning is desired, the end caps can be taken off using a Phillips head screwdriver and rinsed clean. Replace after cleaning. 7. Any loose hair or debris can be pulled from the brush rolls and thrown away. For the most thorough clean before storage, follow directions on pages 18 & 19 for removal and replacement of the brush rolls and belts. 8. To clean attachments that may have been used, remove from hose and rinse under clean, running water. Dry and replace attachment in the tool caddy. Clean the hose by suctioning clean water from the tap. Before replacing, lift end of hose and stretch out to ensure all water is cleared from hose. Refer to page 14. 9. After carpet is dry, vacuum again to remove hair and fuzz.

WARNING: To reduce the risk of fire, electric

shock, or injury,turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.

2.

Small belt removal and replacement

Occasional replacement of one or both belts may become necessary. If that is needed, please follow the instructions below. 1. Turn off the machine, and unplug it from the outlet. 2. Remove both the 2-in-1 water tank and the formula tank. Set aside. 3. Unscrew the front nozzle and remove it. Set aside. 4. Turn the machine on its side. IMPORTANT: cord side down. 5. Remove the clear end cap by unscrewing the 2 black screws. Take care not to drop the screws into the unit. 6. Remove 1 silver screw. 7. Remove pivot arm by gently lifting up. 8. Remove small brush belt. 9. Replace small brush belt, and reverse steps above.
8. 9. 7. 3.

4.

5.

6.

18

www.bissell.com

Maintenance and care

Brush removal and large belt replacement
Brushes can be removed for cleaning or replacement as needed. 1. Follow small belt removal Instructions on page 18. 2. Remove brush rolls by pulling them off of the metal rods. 3. Place cleaned or new brush rolls back onto the rods. Make sure one washer is on each end of the rollers prior to sliding onto the rod. Be sure to let the rod slide through the bushing to insure proper fit. 4. Re-attach the long belt on the bottom to the cogs of the small roller brushes. 5. Place small belt over back roller and metal cog. 6. Place pivot arm in place and screw in place using the silver screw. 7. Re-attach clear end cap by tightening with the (2) black screws. 8. Return front nozzle to front of unit, by latching from underneath and then securing with a screw. If you have any questions or are having trouble installing or replacing your belt(s) or brushes, please call BISSELL Consumer Services.
4. 5. 2.

WARNING: To reduce the risk of fire,

electric shock or injury, unplug from the outlet before servicing.
3.

6.

7.

8.

www.bissell.com

19

Troubleshooting
Built-in heater ready light does not illuminate
Possible causes
1. The heater switch is not turned ON ( I )

Remedies
1. Turn the heater switch ON ( I )

2. The power switch is not turned ON ( I ) 2. Both switches must be ON ( I ) to activate the heater ready light

Reduce Spray or No Spray

Possible causes
1. Water tank may be empty

Remedies
1. Fill heavy duty bladder with hot tap water

2. Formula tank may be empty 2. Fill formula tank with BISSELL 2X formula for cleaning 3. Water tank may not be seated completely 3. Turn power OFF (0). Remove and reseat tank 4. Pump may have lost prime. 4. Turn power OFF (0) and then back ON (I). Wait one minute, then depress trigger

DirtLifter PowerBrush does not turn

Possible causes Remedies
1. The belt is off or broken 1. Turn power OFF ( O ) and unplug unit from outlet. Follow instructions on page 19 2. The unit is in the upright position 2. Brushes only rotate when unit is reclined using the detent pedal 3. Circuit breaker on machine may have tripped 3. Turn the machine OFF ( O ) and unplug from outlet. Check to see if foreign object is caught in brush roll. Remove object. Plug machine in to reset circuit breaker

Cleaner not picking up solution

Possible causes
1. ReadyTools dial may be at wrong setting

Remedies
1. Set ReadyTools dial to either FLOOR CLEANING or TOOLS setting

2. Water tank may not be seated properly 2. Pick up both the 2-in-1 water tank and formula tank and reseat them so they fit snugly on the unit 3. Water tank may not be assembled properly 3. Check to make sure the "lip" of the nozzle is securely hooked into the groove on bottom of Tank (see page 10) 4. Solution or 2-in-1 water tank is empty 4. Check fluid levels in heavy duty bladder and formula tank. 5. 2-in-1 water tank has picked up maximum dirty water 5. Empty 2-in-1 water tank. Refill heavy duty bladder with and red float door has closed. clean hot tap water and replace. 6. Red float "door" in the tank may have closed as a result of bumping 6. an object or moving machine back and forth too quickly Turn the machine OFF ( O ), allowing red float door to release into the open position. Turn unit back ON ( I ) to continue cleaning. Be sure your forward and backward strokes are done at a slower pace.

Other maintenance or service not included in the manual should be performed by an authorized service representative.

Thank you for selecting a BISSELL product.

Please do not return this product to the store.

20

www.bissell.com

Replacement parts
Item
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 203-8107 203-8108 203-8109 203-6675 203-6676 203-6677 203-8111 203-6679 203-6845 203-6680 203-6682 203-6685 203-6686 203-6688 203-6804 203-6689 203-6690 203-8112

Part No.

Tank Assembly (complete) Tank Lid Tank Bottom Cap and Insert for Water Tank Formula Tank (includes Cap & Insert for Formula Tank) Cap and Insert for Formula Tank Front Nozzle (includes gasket) Autoload Gasket (fits both Water and Formula Tank) Float Door Tank Filter (Lint Screen) Cord Wrap (Black) Clear End Cap w/Edge Brushes (2 pack, includes screws) Brush Roll 6 row (includes 1 brush, axle, 2 swivel arms) Small Brush Belt (non-cord side) Large Brush Belt (cord side) Hose Secure Latch Hose Rack Assembly (Top/Bottom Hose Rack, Screws) CleanShot Cover

Part Name

10

11

12

13

14

15

16

17

18

www.bissell.com

21

Accessories
While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired. 1 203-6651 3 Tough Stain Tool 2 203-6652 Powered TurboBrush Hand Tool 3 203-6653 4 Upholstery Tool 4 203-6654 6 Stair Tool 5 203-6655 Spraying Crevice Tool 6 203-6692 Bare Floor Tool 7 203-8113 Deep Reach Tool 8 81L5-E 1.5 L 2X Wash & Protect Professional Formula w/ Scotchgard Protector 11 66W9-E 1.5 L 2X Wash & Protect Pet Stain & Odour Formula w/ Scotchgard Protector 12 92F4-E 1.5 L 2X Wash & Protect Fresh Fragrance Formula w/ Scotchgard Protector 13 12W4-E 1.5 L 2X Wash & Protect Spring Breeze Fragrance Formula w/ Scotchgard Protector 14 33D2-E 1.5 L 2X Wash & Protect Lavender Fragrance Formula w/ Scotchgard Protector 15 56L9-E 473 mL 2X Hard Floor Solutions 16 0400-E 651 mL Tough Stain Precleaner

Item Part No. Part Name

10

11

12

13

14

Note: Additional BISSELL formula options may be available at your local retailer.

22

www.bissell.com

Warranty - BISSELL CleanView Deep Clean

This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by telephone, or regular post as described below, or contact your local in country distributor.

Limited Five Year Warranty

Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, BISSELL Homecare, Inc., will replace (with new or remanufactured components), at BISSELLs option, free of charge from the date of purchase by the original purchaser, for five years any defective or malfunctioning part do to manufacturers defect. This warranty applies to product used for personal, and not commercial or rental service. This warranty does not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negligence, abuse, or use not in accordance with the Users Guide is not covered.

For UK inquiries: Monday - Thursday 9 am 5 pm Friday 9 am 4 pm BISSELL Homecare (Overseas) Ground Floor 226 Berwick Avenue Slough Berkshire, SL1 4QT United Kingdom Telephone: 0844-888-6644

For all other inquiries: Monday - Friday 8 am 4 pm BISSELL Homecare, Inc. PO Box 1888 Grand Rapids, Michigan 49501 USA Telephone: 01-616-453-4451 Fax: 01-616-453-1383

BISSELL HOMECARE INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELLS LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT. *EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE FIVE YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.

www.bissell.com

23

BISSELL consumer services

If your BISSELL product should require service:
Call BISSELL Consumer Services at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area. If you have questions about your warranty or need replacement parts please contact the numbers below.

For UK inquiries: Monday - Thursday 9 am 5 pm Friday 9 am 4 pm BISSELL Homecare (Overseas) Ground Floor 226 Berwick Avenue Slough Berkshire, SL1 4QT United Kingdom Telephone: 0844-888-6644

For all other inquiries: Monday - Friday 8 am 4 pm BISSELL Homecare, Inc. PO Box 1888 Grand Rapids, Michigan 49501 USA Telephone: 01-616-453-4451 Fax: 01-616-453-1383

Or visit the BISSELL website - www.BISSELLdirect.co.uk

When contacting BISSELL, have model number of cleaner available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim. See Warranty on page 23 for details.

24

2012 BISSELL Homecare, Inc Grand Rapids, Michigan All rights reserved. Printed in China Part Number 120-4411 Rev 9/11 Visit our website at: www.bissell.com Scotchgard is a trademark of 3M Microban is a registered trademark of Microban Products Company

www.bissell.com