<<Contents>> <<Index>>

General Specications
GS 36J02A10-01E

NTPF100 Exaopc OPC Interface Package

GENERAL

Alarms & Events (A&E) Server Function (*1)

The A&E Server provides alarms and events from plants that occur asynchronously. The following messages are available from Yokogawa CENTUM Integrated Production Control Systems: - System alarm messages - Process alarm messages - Mode/status change messages - Sequence messages - Operation guide messages - Engineering maintenance messages - Operation record messages - Server internal errors

As data sharing between information systems increases, the requirement to efciently access and use plant information to meet business needs in a timely manner also increases. Within the process industry, the control room contains valuable information that has previously been inaccessible. Exaopc was created to provide an open OPC (Open Product Connectivity) interface bridge between the control room and the outside world. Exaopc is an OPC server running on a Microsoft Windows platform which can be connected to a variety of PCSs (Process Control Systems) providing OPC clients with process data and alarm events. This GS contains the specication for the Exaopc OPC Server Interface Package.

Batch Server Function (*2) [VP Batch, CS Batch 3000]

The Exaopc batch server function (Exaopc/Batch) reads and writes batch data and its related information with VP Batch and CS Batch 3000.

FUNCTIONAL SPECIFICATIONS
Data Access (DA) Server Function

Exaopc supports the following OPC specications:

OPC Security Interface

Exaopc provides security by using an OPC Securitycompliant interface whenever an OPC Client uses the DA, A&E, HDA and/or Batch servers.
*1: *2: Alarms & Events function does not support for Consolidated Alarm Management Software (CAMS) for HIS. OPC client is dedicated to Exaquantum/Batch.

The DA Server reads and writes process data using item IDs as identiers.

Historical Data Access (HDA) Server Function

Exaopc automatically saves instantaneous values acquired from the DA Server and A&E Server, to an HDA historical database. The OPC client can access historical data by rst connecting to the HDA Server.

GENERAL CONFIGURATION
OPC Client Exaopc <Server Common> Exaopc DA Server Exaopc DA Server Common Exaopc HDA Server Historical Database Exaopc A&E Server Exaopc A&E Server Common Exaopc Batch Server Exaopc Batch Server Common

DA I/O Cassette <I/O Cassette>

A&E I/O Cassette

Batch I/O Cassette

PCS OPC Interface Event Process Data Batch Data/Batch Information Engineering Data PCS: Process Control System
F01E.ai

Yokogawa Electric Corporation 2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 Japan Tel.: 81-422-52-6375 Fax.: 81-422-52-5994

GS 36J02A10-01E Copyright June 1999 (YK) 31st Edition Nov. 30, 2012 (YK)

<<Contents>> <<Index>>

FEATURES
Major Applications
The Exaopc OPC Interface can be used in a wide variety of OPC client applications. - Yokogawa packages, including Exaquantum PIMS and Exapilot (Operation Efciency Improvement Package) - OPC standard compliant general-purpose applications - User applications created using VB or VC++

CENTUM Security [CENTUM VP/CS 3000/CS 1000/CS]

Exaopc security (account, scope of monitoring, operation ID, operator console group and access level) is dependent on the CENTUM.

Trafc Control
When an OPC client attempts to access a large volume of data from a CENTUM CS system loading problems may occur (load concentration on control stations and control buses, in particular). To prevent problems, access from OPC clients are restricted to avoid the maximum accessible data rate being exceeded.

Compliance with OPC Specications

The Exaopc package supports OPC standard interface functions (DA/A&E/HDA, Batch, Security) specied by the OPC Foundation, and additional functions such as data item browsing.

Exaopc supports Compliance Test Tool (CTT) [CENTUM VP/CS 3000/CS 1000]
Exaopc supports Compliance Test Tool (CTT) provided by the OPC Foundation. (Custom Interface for DA3.0, DA2.05a, A&E1.10, or HDA1.20)
Note: On CTT Compliance mode, some functions of Exaopc R3.21 or earlier version may not operate. If OPC client is Exaquantum, Exapilot, Exasmoc, or Exarqe, the conventional mode should be used. When use DA3.0, the CTT Compliance mode should be used.

Expanded Test Functions [CENTUM VP/CS 3000/CS 1000]

By connecting to the Expanded Test Functions on CENTUM VP/CS 3000/CS 1000, users can access the FCS simulator on a station with CENTUM VP/CS 3000/ CS 1000 engineering functions. Therefore, users can perform engineering and testing OPC clients without using actual FCSs.

Multiple Project Connection [CENTUM VP/CS 3000]

On Exaopc, users can use Multiple Project Connection functions for CENTU VP/CS 3000, which enables integrated monitoring of multiple projects. This allows users the ability to handle CENTUM VP/CS 3000/CS 1000/CS project data on Exaopc as well as the data from their own project. To use these functions, the supervisory CENTUM VP/ CS 3000 system requires a Multiple Project Connection Package. Function specications, restrictions, and the operational environment for these functions are the same as for CENTUM VP/CS 3000. See GS 33K05K20-50E/GS 33M05K20-40E/GS 33Q02S10-31E LHS5450/ LHS4450 Multiple Project Connection Package for further information.

Connectivity with CENTUM Systems

Exaopc can be connected to Yokogawa CENTUM VP/CS 3000/CS 1000/CS DCSs.

Automatic Backup
The process data acquired by the DA server is automatically saved and stored in the historical database as backup data. Access to the stored data is enabled by the HDA server function.

Equalization [CENTUM VP/CS 3000/CS 1000/CS]

A list of tags in CENTUM can be equalized by Exaopc. When function blocks (tags) are added, deleted or changed in the FCS (Field Control Station) builder and they are loaded, a change notication is sent to Exaopc. Exaopc will then update function block data based on the received data.

Viewer Function and Tool Function

These functions provide various kinds of viewer and tool to check and monitor Exaopc operation status. Software Conguration Viewer, Station Viewer, OPC Connection Conrm, Exaopc Server Monitor

Browsing [CENTUM VP/CS 3000/CS 1000/CS]

Users can view the content of the OPC server from OPC client. The OPC client can access CENTUM tag list Exaopc acquired by Equalization functions.

IT Security support
A user can select suitable security level out from standard and legacy types. This IT security level is common through Yokogawa system products, and Exaopc is able to have the same IT security as CENTUM system.

Exaopc Product Security Function

In order to tighten the security for accessing the CENTUM system, access to the CENTUM data is blocked until after the user authentication is done by logging on to the OPC client.

All Rights Reserved. Copyright 1999, Yokogawa Electric Corporation

GS 36J02A10-01E Nov. 30, 2012-00

<<Contents>> <<Index>>

3
Connection Method Vnet/IP or V net (*1) V net V net V net VL net

CONNECTED SYSTEMS
System CENTUM VP (Including Entry Class) R5.01 or later CENTUM VP (Including Entry Class) R4 CENTUM CS 3000 CENTUM CS CENTUM CS 1000 *1: Vnet/IP is supported on Exaopc R3.70 or later.

SYSTEM CONFIGURATION
Server/Client Composition
The following two client/server congurations can be used: - The OPC client exists on a PC with Exaopc installed. - The OPC client exists on a supervisory computer (Windows PC).

Multiple Clients
A single Exaopc can be accessed from multiple OPC clients.

Multiple Servers
Users can access multiple Exaopcs from a single OPC client.

Duplicated OPC Server Conguration

Exaopc-RD (installed on the OPC client machine) supports OPC Server redundancy by monitoring two Exaopc servers and automatically switching from the Master to the Standby Exaopc server if the Master becomes unavailable. Please contact Yokogawa for additional information.
Client PC OPC Client (*1)
OPC Interface Process Data Acquire/Setting

OPC Server Redundancy Function (Redundant DA, Redundant A&E, Redundant HDA)
Ethernet OPC Server 1 Exaopc (DA, A&E, HDA) Redundant Ethernet OPC Server 2 Exaopc (DA, A&E, HDA) Control Network

Master

Standby

CENTUM
F04E.ai

*1:

OPC client is exclusively used for Exaquantum or Exapilot.

Figure: Conguration Example for Duplicated OPC Server

All Rights Reserved. Copyright 1999, Yokogawa Electric Corporation

GS 36J02A10-01E Nov. 30, 2012-00

<<Contents>> <<Index>>

CENTUM VP/CS 3000/CS 1000 and CENTUM CS System Conguration

- Exaopc is directly connected to the DCS control buses using the VF702/VF701/VI702 Control Bus Interface Card to communicate with control stations. This provides Exaopc with the ability to read and write tag data and receive process messages. - Exaopc automatically equalizes engineering data from the CENTUM ENG/EWS Engineering Station. - Multiple Exaopc servers can be connected to one CENTUM system. Those servers are counted as control bus stations equivalent to Human interface station (HIS) /Information Command Station (ICS) on the system. - Please congure the entire system considering the CPU loading of the control stations and the bus loads of the control buses. - Exaopc for VP Batch and CS Batch 3000 can be connected to VP Batch and CS Batch 3000 packages. - Connection to CENTUM VP Entry Class and CS 3000 Entry Class is similar to that of CENTUM VP/CS 3000. .
Application PC (OPC Client)

Ethernet HIS ENG

Control Network LFCS LFCS

Exaopc (OPC Server)

OPC Interface Process data Engineering data

F02E.ai

Figure: Conguration Example for CENTUM VP/CS 3000

All Rights Reserved. Copyright 1999, Yokogawa Electric Corporation

GS 36J02A10-01E Aug. 26, 2011-00

<<Contents>> <<Index>>

APPLICATION CAPACITY
OPC Server function Item A number of clients (A number of server objects) A number of groups (A number of group objects) DA Server A number of Item IDs Cache update period (Data gathering period) Max. throughput of data access (*1) A number of clients (A number of server objects) Max. number of event-registered objects (Max. number of event subscription objects) A number of clients (A number of server objects) A number of browser (A number of browser objects) A number of item IDs Max. historical data save period (*4) A number of clients (A number of server objects) A number of groups (A number of group objects) A number of item IDs *1: *2: *3: *4: *5: Application capacity 100 clients 1000 groups 10000 item IDs/group 100000 item IDs/all groups 1 to 3600 sec 2000 item IDs/sec or 4000 item IDs/sec (*5) 100 clients 1000 objects 100 clients 100 browser/server object 10000 browser/all server objects 100000 item IDs/server object Not restricted (Depends on disk capacity, its area is dened with a Record parameter) 100 clients 1000 groups 10000 item IDs/group 100000 item IDs/all groups

A&E Server (*2)

HDA Server (*3)

Batch Server

It depends on the conditions of the project and the application. On Exaopc, process alarms are treated as condition events. A table is provided to manage process alarm occurrence, ACK and recovery events. In case of overow on the table due to numerous process alarms, the OPC client will receive the process alarm occurrence events only. DCS will receive a system alarm to notify the overow situation on the table. If the data requests for a HDA are more than 20000 ItemIDs (2880 default recodes per each ItemIDs), the response may take a long time. It may be necessary to use one or more Exaopc. (Example: the phenomenon may occur when using the catch up function of Exaquantum.) The PC performance may be inuenced when the number of records increases from the default value. In order to achieve 4000 item ID/sec throughput, all of the following conditions must be met. - The system uses CENTUM VP R5.01 or later and Exaopc R3.70 or later. - All the FCS in the domain must be congured only with FFCS-V (models: AFV30/AFV40). Even if a UGS is deployed in the conguration, throughput ratio of 4000 item-ID/second can be realized. [Supplement] In case any one or more of SCS, AVR10D, SIOS, or GSGW are included in the conguration, the throughput ratio becomes 2000 item-ID/second. In case there are multiple domains in a CENTUM project, all the domains must meet the environmental conditions of CENTUM station deployment as described above to fulll 4000 item-ID/second. (If in case any of the domains in the project does not fulll the above mentioned conditions, the throughput ratio becomes 2000 item-ID/second for all the domains.) UGS : Unied Gateway Station SCS : Safety Control Station AVR10D : Duplexed Vnet Router SIOS : System Integration OPC Station GSGW : Generic Subsystem Gateway

All Rights Reserved. Copyright 1999, Yokogawa Electric Corporation

GS 36J02A10-01E Nov. 30, 2012-00

<<Contents>> <<Index>>

OPERATING ENVIRONMENT
Hardware
Machine: IBM PC/AT Compatible (DOS/V)
OS (As for detail, refer to the Software Operating Environment.) Specication Item Required CPU Main memory Disk capacity Drive *1: Recommended Required Required Recommended Required Windows Vista, Windows Server 2008 (32bit) Pentium 4 2.84 GHz or faster Core 2 Duo 2.66 GHz or faster 2 GB or more (*1) 10 GB or more 40 GB or more DVD-ROM Drive 40 GB or more Windows 7 (64bit) Core 2 Duo 2.13 GHz or faster Xeon Dual Core 2.0 GHz or faster Windows Server 2008 R2 (64bit) Xeon Dual Core 2.93 GHz or faster

4 GB or more 20 GB or more 50 GB or more

1 GB of main memory is supported for revision up from R3.60 or earlier versions of Exaopc.

Exaopc OPC Server Redundancy (Exaopc-RD) is required below environment.

OS (As for detail, refer to the Software Operating Environment.) Windows Server 2008 (32bit) CPU Main memory Disk capacity Required Recommended Required Required Recommended Pentium 4 2.84 GHz or faster Core 2 Duo 2.66 GHz or faster 2 GB or more 20 GB or more 40 GB or more Windows Server 2008 R2 (64bit) Xenon Dual Core 2.93 GHz or faster 4 GB or more 20 GB or more 50 GB or more

Specication Item

Communication device:
System OPC clients (Including SBP product) CENTUM VP/CS 3000/CS 1000/CENTUM CS CENTUM VP R5.01 or later Compatibility of communication device Ethernet-ready network card VF702/VF701 Control Bus Interface Card VF702/VF701 Control Bus Interface Card, and VI702 Vnet/IP Interface Card

All Rights Reserved. Copyright 1999, Yokogawa Electric Corporation

GS 36J02A10-01E Aug. 26, 2011-00

<<Contents>> <<Index>>

Software
The following lists the software requirements for Exaopc and the OPC Client connected to Exaopc according to the Exaopc release numbers.
Exaopc release number R3.01 R3.10, R3.11, R3.20 Windows (Exaopc, OPC Client) Windows 2000 Professional or Windows 2000 Server Windows XP Professional Windows 2000 Professional or Windows 2000 Server Windows XP Professional Windows Server 2003 Standard Edition Windows 2000 Professional or Windows 2000 Server Windows XP Professional Windows Server 2003 Standard Edition Windows Server 2003 R2 Standard Edition Windows Vista Business Edition Windows XP Professional Windows Server 2003 Standard Edition Windows Server 2003 R2 Standard Edition Windows Vista Business Edition Windows XP Professional Windows Server 2003 Standard Edition Windows Server 2003 R2 Standard Edition Windows Server 2008 Standard Edition Windows 7 Professional (64 bit) (*1) Windows Vista Business Edition (32 bit) Windows Server 2008 Standard Edition (32 bit) Windows Server 2008 R2 Standard Edition (64 bit) Service Pack (Exaopc) 4 1, 2 4 1, 2 1 4 2 1, 2 2 1 2, 3 2 2 1, 2 2, 3 2 2 2 1 2 2 1

R3.21

R3.50

R3.60

R3.70, R3.71

Note: Only the latest version of Exaopc is available for sale. Exaopc package and its Windows operating system (OS) must share the same language environment. Exaopc for OPC server redundancy function (Exaopc-RD) is operable on Windows Server 2008/2008 R2. *1: 32-bit OS is supported only for OPC client connected to Exaopc R3.71.

Connecting with CENTUM Systems The table below shows the software connectability between Exaopc revisions and CENTUM VP/CENTUM CS 3000/ CS1000 versions/revisions.
CENTUM CS 1000/CENTUM CS 3000 Exaopc R3.01 R3.10 R3.11 R3.20 R3.21 R3.50 R3.60 R3.70 R3.71 XX: X: NC: *1: *2: *3: *4: *5: *6: R3.01 R3.02 R3.03 XX (*3) XX (*4) XX (*4) XX (*4) XX (*4) XX (*5) XX (*5) XX (*5) XX (*5) R3.04 R3.05 X (*2) XX (*4) XX (*4) XX (*4) XX (*4) XX (*5) XX (*5) XX (*5) XX (*5) R3.06 X (*2) X (*2) XX (*4) XX (*4) XX (*4) XX (*5) XX (*5) XX (*5) XX (*5) R3.07 X (*2) X (*2) X (*2) XX (*4) XX (*4) XX (*5) XX (*5) XX (*5) XX (*5) R3.08 X (*2) X (*2) X (*2) X (*2) XX (*4) XX (*5) XX (*5) XX (*5) XX (*5) R3.09 X (*2) X (*2) X (*2) X (*2) X (*2) X (*2) (*5) XX (*5) XX (*5) XX (*5) R4.01 NC NC NC NC NC XX XX XX XX CENTUM VP (*1) R4.02 NC NC NC NC NC X (*2) XX XX XX R4.03 NC NC NC NC NC X (*2) X (*6) XX XX R5.01 NC NC NC NC NC X (*2) X (*2) (*6) XX XX R5.02 NC NC NC NC NC X (*2) X (*2) (*6) X (*2) XX

Connectable. Exaopcs Expanded Test Functions can be used only with this combination. Connectable but without Exaopcs Expanded Test Functions. Not Connectable CENTUM VP R4.01 or later Some of the CENTUM new functions are not available because the release of these Exaopc was preceded to the CENTUM systems. Install Windows XP SP2 for Exaopc when the Exaopc extended test function is operated on Windows XP environment. Install the latest service packs that each Exaopc release number requires when the Exaopc extended test function works is operated on Windows Server 2003 or Windows XP. User Account setting is required on CENTUM HIS. Install Exaopc R3.60.06 patch version when the Windows user authentication mode is applied for authentication setting.
GS 36J02A10-01E Nov. 30, 2012-00

All Rights Reserved. Copyright 1999, Yokogawa Electric Corporation

<<Contents>> <<Index>> Connecting with CENTUM CS The table below shows the software connectability between Exaopc revisions and CENTUM CS revisions.
Exaopc R3.01, R3.10, R3.11, R3.20, R3.21 R3.50, R3.60, R3.70, R3.71 X: -: NC: Connectable Connectable but with limitations Not Connectable CENTUM CS R2.09 R2.10 or later X NC X

Connectability between Exaopc Batch Server and VP Batch/CS Batch 3000/CS Batch 1000 The table below shows the software connectability between Exaopc/Batch revisions and Vp Batch/CS Batch 3000/CS Batch 1000 versions/revisions.
Exaopc/Batch R3.01 R3.10 R3.11 R3.20 R3.21 R3.50 R3.60 R3.70 R3.71 X: -: NC: Note: CENTUM CS Batch 3000/CS Batch 1000 R3.01 R3.02 NC NC NC NC NC NC NC NC NC R3.03 R3.04 X R3.05 X R3.06 R3.07 X R3.08 X X R3.09 X X X R4.01 X X X R4.02 NC NC NC NC NC X X X VP Batch R5.01 R4.03 R5.02 NC NC NC NC NC NC NC NC NC NC NC X X X X X

Connectable Connectable but with limitations Not Connectable Exaopc Batch Server does not support multiple project connection function.

All Rights Reserved. Copyright 1999, Yokogawa Electric Corporation

GS 36J02A10-01E Nov. 30, 2012-00

<<Contents>> <<Index>>

Installation of Multiple Exaopc

Only one Exaopc can be installed in one PC. Two or more Exaopc can not be installed in one PC.

Limitations in coexistence with Solution-based software packages (SBP)

In case one or more SBP products (*1) and the Exaopc reside in a single PC, it is called coexistent. The applicable combination of a server and client(s) for Exaopc and other SBP products is as shown below. Use the latest release numbers of the SBP products at the release of Exaopc R3.71.
*1: Exaopc, Exaquantum, Exaquantum/Batch, Exapilot, Exasmoc, and Exarqe

The combination of SBP Products and Exaopc to be coexistent is as show below.

Exapilot (R3.95) Exaopc (R3.71) OK: OK Applicable N/A: Exaquantum (R2.70) OK (*1) Not Applicable Exaquantum /Batch N/A Exaplog (R3.40) OK Exasmoc (R4.03) OK (*2) Exarqe (R4.03) OK (*2)

Note: When Exaopc resides with other SBP products, all the IT Security models must be identical. Note: Please contact Yokogawa when Exaopc resides with other revisions. *1: *2: Set Exaopc IT Security to Legacy model. Exasmoc/Exarqe patch (Modication module) is required.

Remarks when connecting Exaopc with other SBP products via network
Please consider to set the IT security level of each SBP products as the same level as the security model when it is resided with Exaopc, even when it is connected via network.

Document Browser
Adobe Reader 9.5, 10.1 or later.
Note: It is necessary to install Adobe Reader to read document of Exaopc.

All Rights Reserved. Copyright 1999, Yokogawa Electric Corporation

GS 36J02A10-01E Nov. 30, 2012-00

<<Contents>> <<Index>>

10

SUPPORTED OPC SPECIFICATIONS

DA Server

The Exaopc package provides the OPC client with an interface with the following specications:

- OPC Data Access Custom Interface Specication Version 2.05a/3.0 - OPC Data Access Automation Specication Version 2.0 - OPC Security Custom Interface Specication Version 1.0

A&E Server
- OPC Alarms and Events Version 1.10 (Exaopc R3.10 or later) (*1) - OPC Alarms and Events Automation Specication Version 1.0 (draft) - OPC Security Custom Interface Specication Version 1.0
*1: OPC Alarms and Events Version 1.0 had been supported by Exaopc R3.01.50 or earlier. The specication range of the severity for the SetFilter method is changed from 0 to 1000 (A&E1.0) to 1 to 1000 (A&E1.10). When severity=0 value is set for the SetFilter method to Exaopc A&E1.10 OPC server, an error code will be returned by Exaopc because it is out of range. Be sure to use A&E version compatible with both Exaopc and an OPC client accordingly.

HDA Server
- OPC Historical Data Access Custom Interface Version 1.2 - OPC Historical Data Access Automation Interface Version 1.0 (draft) - OPC Security Custom Interface Specication Version 1.0

Batch Server
- OPC Batch Custom Interface Specication Version 1.0 - OPC Batch Automation Specication Version 1.0 - OPC Security Custom Interface Specication Version 1.0 Visit the web site of OPC Foundation at http://www.opcfoundation.org for OPC interfaces. When OPC client program that accesses Exaopc DA/A&E/HDA Server is congured with the VB application, it is recommended to use the Exaopc Client Library of Yokogawa Solutions Corporation (model: NTPT900) for VB programmer. The Library provides OPC connection functionality with the ActiveX component.

ANNUAL MAINTENANCE CONTRACT

The product is supplied without the manufacturers warranty costs. Users are required to enter into an annual maintenance contract to receive maintenance service from the rst year of the purchase onward. For more details of the maintenance service, please refer to Maintenance Services for Solution-Based Software Package [GS 36J20A10-01E].

All Rights Reserved. Copyright 1999, Yokogawa Electric Corporation

GS 36J02A10-01E Nov. 30, 2012-00

<<Contents>> <<Index>>

11

MODEL AND SUFFIX CODE

Exaopc OPC Interface Package
Model NTPF100 -S 1 2 3 A B C X 1 /Y-QTM /Y-PLT /Y-SMC /Y-RQE /Y-OMS /Y-CTM /Y-CLB /Y-TRF /Y-OTH Description Exaopc OPC Interface Package Basic Software License (with media) For CENTUM VP/CS 3000, CENTUM VP/CS 3000 Entry Class (DA, A&E, HDA Server Functions) For CENTUM CS 1000 (DA, A&E, HDA Server Functions) For CENTUM CS (DA, A&E, HDA Server Functions) For general-purpose system (*1) For VP Batch, CENTUM CS Batch 3000 (DA, A&E, HDA, Batch Server Functions; Exaopc/Batch) (*2) For CENTUM CS Batch 1000 (DA, A&E, HDA, Batch Server Functions; Exaopc/Batch) (*2) For OPC Server Redundancy (Exaopc-RD) (*3) English version For Yokogawa OPC Clients: Exaquantum For Yokogawa OPC Clients: Exapilot (*4) For Yokogawa OPC Clients: Exasmoc For Yokogawa OPC Clients: Exarqe For Yokogawa OPC Clients: Exaoms For Yokogawa OPC Clients: CENTUM Optional-Software For Yokogawa OPC Clients: Exaopc Client Library (for NTPT900) For Yokogawa OPC Clients: TriFellows For Yokogawa OPC Clients: Other products

Sufx Codes

Option Codes

*1: *2: *3: *4:

Consult with Yokogawa to use this Sufx Code. Exclusively used for Exaquantum/Batch. Exclusively used for Exaquantum or Exapilot. AAASuite (Advanced Alarm Administrator) Alarm Rationalization Assistance Package is included. Description Maintenance Service for Exaopc Annual Contract For CENTUM VP/CENTUM CS 3000 For CENTUM CS 1000 For CENTUM CS For general-purpose system For CENTUM VP/CENTUM CS 3000 (Exaopc/Batch) For CENTUM CS 1000 (Exaopc/Batch) For OPC Server Redundancy (Exaopc-RD) Always 1

Maintenance Service for Exaopc

Model NTMF100 -S 1 2 3 A B C X 1

Sufx Codes

ORDERING INFORMATION
Specify model and sufx codes.

TRADEMARK

- Exaopc, Exapilot, Exaquantum, Exaplog, Exasmoc and Exarqe are registered trademarks of Yokogawa Electric Corporation. - CENTUM is a registered trademark of Yokogawa Electric Corporation. - Windows, ActiveX, Visual Basic, Visual C++ are registered trademarks of Microsoft Corporation. - Ethernet is a registered trademark of XEROX Corporation. - Pentium, Core 2 Duo and Xeon are registered trademarks of Intel Corporation. - Adobe Reader is either registered trademakrs or trademarks of Adobe Systems Incorporated in the United States and/or other countries. - All other company and product names in this GS are registered trademarks or trademarks of respective companies.

All Rights Reserved. Copyright 1999, Yokogawa Electric Corporation Subject to change without notice.

GS 36J02A10-01E Nov. 30, 2012-00