Scribd
Upload
204 views

Experiment 1 Pre-Lab of Engineering Material

It provides information on how to perform ASTM calculations on a microscopic graph of a metal. The aim to get the average grain size.

Uploaded by

R-wah Larounette
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
204 views

Experiment 1 Pre-Lab of Engineering Material

It provides information on how to perform ASTM calculations on a microscopic graph of a metal. The aim to get the average grain size.

Uploaded by

R-wah Larounette
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 29

Experiment # 1

Microstructure of Materials

Exp. 1A: Metals

Exp. 1B: Composite Materials

Eng. Rihab K. Hamza

Experiment 1-A
Metallic Materials Microstructure

Eng. Rihab K. Hamza

Objectives
The objective of this experiment is to prepare a specimen cut from the cross section of a steel bar for micro structural examination in order to determine the following: 1. The average grain size number n-ASTM 2. The average grain size in mm. 3. The average aspect ratio of the grains AAR.

Eng. Rihab K. Hamza

Theory
Microstructure examination of metallic materials is used to reveal the grain size as well as different phases existing within the microstructure of the metal. Material microstructure has a great influence on different material properties.
Grain Size Different phases
Eng. Rihab K. Hamza

Apparatus
1. Cutting machine: to acquire a specimen sample. 2. Phenolic powder: to facilitate the handling (Glue). 3. Rotary grinder & Grinding papers :to grind the specimen surface . rough: 240-400,fine: 600-2400 4. Polishing machine: to polish the specimen surface. Polishing machine and diamond paste 5. Etching solution: to reveal the grain boundaries. 2% natal (2% nitric acid and 98% Ethanol ) 6. Optical microscope to examine the specimen. 7. Digital camera: to capture image. 8. Computer: to save image.
Eng. Rihab K. Hamza

Procedure
Specimen preparation

Microscopic Examination

Data Analysis

Eng. Rihab K. Hamza

Specimen preparation

Eng. Rihab K. Hamza

Specimen preparation
1. Sampling: Specimens are cut carefully from the steel bar in a way that it does not affect the material microstructure. 2. Mounting: It is achieved to facilitate the handling of the specimen. Phenolic powder (thermoplastic resin) is used to form a mount around the steel specimen by the hot pressing technique. 3. Grinding: Rough and fine sand grinding papers are used to grind the specimen surface. Water and alcohol are used to clean and remove the debris. 4. Polishing: Diamond pastes with diamond particles having diameters of 1 m and 0.25 m are used to polish the specimen surface. 5. Etching: 2% natal solution is used to reveal the grain boundaries of the specimen.
Eng. Rihab K. Hamza

Microscopic Examination
1. Place the mounted steel specimen on the microscope stage. 2. Turn on the microscope illumination and the digital camera. 3. Adjust the focus of the microscope and the camera to include enough clear number of grains. 4. Activate the camera and save the image on a floppy disk. 5. Record the magnification factor of the microscope and the zoom factor of the camera. 6. Display the saved image using the image processing software. 7. Calculate the magnification factor by multiplying the magnification factors of the microscope, the camera zoom factor, and the enlargement factor of the image processing software.

Eng. Rihab K. Hamza

Magnification factor=

Microscope magnification factors

Camera Zoom factor

Software Enlargement factor

Eng. Rihab K. Hamza

Data Analysis
1. The average grain size number:
Draw 3 squares of 1 X 1 (25.4x25.4 mm) frame on the saved image Count the number of grains included within the frame, Nmag do not include an uncompleted grains within the frame.

Eng. Rihab K. Hamza

ASTM grain size number (n)


The number of grains counted in step2 should be at a magnification of 100 X. the number of grains at 100X magnification can be calculated from: Actual No. of grains at real magnification
N
100

mag

mag 100

Magnification factor

No. of grains at 100X magnification according to ASTM

Eng. Rihab K. Hamza

Therefore, the specimen grain size number, n, can be calculated from: N100= 2 n-1 Where, N100: number of grains at 100 X per square inch n: ASTM grain size number (integer). Now, Calculate n for three different 1X1 and take the average value.

Eng. Rihab K. Hamza

2.The average grain size (AGS)

Eng. Rihab K. Hamza

2.The average grain size (AGS)


Determine the average grain size (AGS) of the specimen by counting the number of grains a long a 1(25.4 mm) line in the frame as:
1 magnificat ion AGS number of grains a long 1" line

Calculate AGS for three different lines and take the average value.
Eng. Rihab K. Hamza

Eng. Rihab K. Hamza

Eng. Rihab K. Hamza

Experiment 1-B:
Microstructure of Composite Materials

Eng. Rihab K. Hamza

Eng. Rihab K. Hamza

Theory
Definition: A composite is a multiphase material that can be artificially made. Two or more different materials are combined together to form a composite material. Various metals, ceramics, and polymers can be employed in designing composite materials. One example of the composite materials is glass-fiber reinforced composite in which very thin glass fibers are contained within a polymer matrix. Glass-fiber reinforced composites are widely employed in several important industrial applications as automobile and marine bodies and storage containers.
Eng. Rihab K. Hamza

Eng. Rihab K. Hamza

Eng. Rihab K. Hamza

Eng. Rihab K. Hamza

Eng. Rihab K. Hamza

Data Analysis:
Since the examined specimen is a continuous fiber composite, the ratio of the total fiber volume to the composite volume (FVF) is equivalent to the ratio of the total fiber area to the composite cross sectional area as follows:
Total fiber cross sectional area FVF Total cross sectional area of the frame [1 in 2 ]

Eng. Rihab K. Hamza

Eng. Rihab K. Hamza

Data Analysis:
FVF calculation steps: 1. Draw a (1 * 1) frame on the saved image which should look similar to that given in figure 1. 2. Count the number of fibers within the frame. Do not consider uncompleted fibers within the frame. 3. Measure the diameter of each fiber within the frame in two perpendicular directions. Record the measurements in a table similar to the following table. 4. Calculate the average diameter and actual average diameter (taking into account the magnification factor) for each fiber. 5. Calculate the FVF of the examined glass fiber composite specimen.

Eng. Rihab K. Hamza

Eng. Rihab K. Hamza

Eng. Rihab K. Hamza

You might also like