Notes :

CPWD DELHI ANALYSIS OF RATES -2012 (WITH FORMULAS)

01. This entire work is done by me alone and every item is compared with DSR-2012 and DAR-2012
02. At the end of each item the DSR-2012 rate is shown, so that it is easy to compare both the rates.
03. DSR rate in 'Green' means it is tallied with Analysed rate.
04. DSR rate in 'Red' means it is not tallied with Analysed rate but the analysed rate is tallied with that of DAR-2012.
05. Where sub analysis is involved the analysed rate will not tally exactly to that of DAR-2012 because, in DAR every
rate is rounded-off. But in this analysis, I have not rounded-off to nearest 5 np. But both the rates are very close.
06. Where ever there is an error in DAR (only a few items this time) it is mentioned in the item it self.
07. Please let me know, if I am violating any copy right, so that I can delete the post from internet.
If any one want to share some thing about this analysis with me, they are welcome! Please do mail me on
[email protected]. Even a small comment will boost my enthusiasm to work more.
Sincerely yours
Rambabu Jalli,
SDE(Civil), BSNL,
Hyderabad.

DSR-12

Page 1 of 2298

ANALYSIS OF RATES BASED ON DAR-2012

Sub-Data Analysis - without water charges and without CP & OH
Item Code : 16.052.X
Code

0773
1980
0982
2208
2262
2203

0114
0101
9999
9999

Description

Details of Cost for : 1.00 Cum

Unit
Quantity

Sub Analysis - X
Details of cost for 1 cum of lime Flyash mortar
1:2:3 (lime:2 flyash:3 coarse sand).
MATERIALS:
Unslaked lime
quint
Flyash
cum
Coarse sand
cum
Carriage of Unslaked lime
cum
Carriage of Flyash
cum
Carriage of Coarse sand
cum
Labour for slaking the lime making, lime putty, grinding,
measuring, carrying, depositing and mixing.
Beldar
Day
Bhishti
Day
Running and upkeep of mortar mile
L.S.
Sundries
L.S.

Rate per One Cum :

1.52
0.48
0.72
0.24
0.48
0.72

Beldar
Bhisti
Cost of running and upkeeping of mortar mill
Sundries

Day
Day
L.S.
L.S.

Rate per One Cum :

300.00
7.75
1120.00
87.60
87.60
87.60

0.90
247.00
0.45
260.00
26.91
1.49
13.52
1.49
Cost for 1.00 Cum
Rs 1791.80

Item Code : 3.19

Mortar in lime , surkhi ( 50% red and 50% light yellow) and marble dust 1:1.5:0.5
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIAL:
(0.475 cum of lime putty = 3.01 q of unslaked lime)
1182
Surkhi
Cum
0.7125
0773
Unslaked lime
quint
3.01
0784
Marble dust/ powder
cum
0.24
LABOUR :
For slaking lime, making lime putty, grinding and carrying
0114
0101
9999
9999

Rate

Rate

700.00
300.00
1000.00

0.90
247.00
0.45
260.00
10.35
1.49
5.20
1.49
Cost for 1.00 Cum
Rs 2004.22

Item Code : 3.10

Cement mortar 1:5 (1 cement : 5 coarse sand)
Code

0367
2209
0982
2203

DSR-12

Description
MATERIALS
(0.214cum. of cement = 0.31 tonne)
Cement
Carriage of Cement
Coarse sand
Carriage of Coarse sand
LABOUR

Details of Cost for : 1.00 Cum

Unit
Quantity

tonne
tonne
cum
cum

0.31
0.31
1.07
1.07

Rate

5000.00
77.87
1120.00
87.60

Page 2 of 2298

0114
0101
9999
9999

For measuring, carrying, depositing and mixingBeldar

Bhisti
Hire and running charges of mechanical mixer
Sundries

Day
Day
L.S.
L.S.

Rate per One Cum :

0.75
247.00
0.07
260.00
26.91
1.49
13.52
1.49
Cost for 1.00 Cum
Rs 3129.96

Item Code : 3.7

Cement mortar 1:2 (1 cement : 2 coarse)
Code

0367
2209
0982
2203

0114
0101
9999
9999

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS
(0.476 cum. of cement = 0.68 tonne)
Cement
Carriage of Cement
Coarse sand
Carriage of Coarse sand
LABOUR
For measuring, carrying, depositing and mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries

tonne
tonne
cum
cum

Day
Day
L.S.
L.S.

Rate per One Cum :

0.68
0.68
0.95
0.95

Rate

5000.00
77.87
1120.00
87.60

0.75
247.00
0.07
260.00
26.91
1.49
13.52
1.49
Cost for 1.00 Cum
Rs 4863.86

Item Code : 18.041.01-A

Cost of sand filling for 10m pipe as Fig 'A" marked under item no.18.41.1
Code
6501
2335
0114
0115

Description
MATERIALS:
Fine sand
Carriage of fine sand
LABOUR:
Beldar
Coolie

Details of Cost for : 1.00 Cum

Unit
Quantity

Rate

cum
cum

1.00
1.00

Day
Day

0.09
247.00
0.11
247.00
Cost for 1.00 Cum

Rate per One Cum :

500.00
87.60

Rs 637.00

Item Code : 1681-PY

Plants and Labour required for sub anlaysis 16.81Y for item 16.81
Code
1215
0102
0103
0100
0114
9999
0116
0103

DSR-12

Description
Welding by electric plant
Cutting, assembling and erection charges
Blacksmith 1st class
Blacksmith 2nd class
Bandhani
Beldar
Sundries
Labour for riveting / bolting / cutting etc.
Fitter (grade 1)
Blacksmith 2nd class

Details of Cost for : 1.00 job

Unit
Quantity
cm
165.00

Rate
1.50

Day
Day
Day
Day
L.S.

0.115
0.115
0.11
0.83
12.10

301.00
273.00
260.00
247.00
1.49

Day
Day

0.41
0.54

301.00
273.00

Page 3 of 2298

0100
0114
0139
9999

Bandhani
Beldar
Skilled Beldar
Sundries

Day
Day
Day
L.S.

Rate per One Job :

0.70
260.00
0.54
247.00
0.81
260.00
12.10
1.49
Cost for 1.00 job
Rs 1380.00

Item Code : 1681-P

Cost materials in sub-analysis of 16.81X for item 16.81
Code

Details of Cost for : 1.00 No.

Unit
Quantity

Description

Rate

MATERIALS:
M.S. Sheet 1.63mm thick = 1x2.50x2.00 = 5.00 sqm @ 12.80
kg/sqm = 64.00 kg
wastage @ 5%= 3.20 kg
Total = 67.20 kg
1013

1007

Mild steel sheets for tanks

MS Angle - 40 x 40 x 6 mm
Out frame=2x(2.50+2.00)=9.00 m
Vertical extra = 2x0.300 = 0.60 m
Horizontal = 1x2.50 =2.50 m
Bracing = 1x3.20 = 3.20 m
Bracing at bottom = 2x0.50 = 1.00 m
Total = 16.30 m @ 3.50 kg/m = 57.05 kg +
wastage @ 5% = 2.85 kg
Total = 59.90 kg
Structural steel such as tees, angles channels and R.S. joists

quint

0.672

4600.00

quint

0.599

4250.00

quint

0.0599

4250.00

quint
tonne

0.1449
4200.00
0.148
77.87
Cost for 1.00 No.

M.S. Channel =
2x0.50 =1.00 m @ 5.70 kg/m = 5.70 kg+
wastage @ 5% = 0.29 kg
Total = 5.99 kg
1007

Structural steel such as tees, angles channels and R.S. joists

M.S. Flat 30x5 mm
Horizontal = 3x2.50 = 7.50 m
Vertical = 2x2.00 = 4.00 m
Total = 11.50 m @1.20 kg/m = 13.80 kg +
wastage @ 5% = 0.69 kg
Total = 14.49 kg

1008
2205

Flats up to 10 mm in thickness
Carraige of Steel

Rate per Each :

Rs 6511.63

Item Code : 16.052.Y

Code

16.052.X

DSR-12

Description
Sub Analysis - Y
Details of cost for 1 cum. of cement concrete
MATERIALS:
Lime Flyash mortar
Sub-Analysis - X For item 16.52

Details of Cost for : 1.00 Cum

Unit
Quantity

Cum

0.40

Rate

1791.80

Page 4 of 2298

0295
0297
2202
0114
0115
0101
0123
0124
0128
9999
9999
9999

Stone aggregate 20mm nominal size

Stone aggregate 10mm nominal size
Carriage of stone aggregate
Labour:
Beldar
Coolie
Bhishti
Mason 1st class
Mason 2nd class
Mate
Hire and running charges of mixer
Sundries
Hire charges of steel moulds, table vibrators,
rammers, bolts, nuts and washers etc.

cum
cum
cum

0.64
0.21
0.85

1050.00
1050.00
87.60

Day
Day
Day
Day
Day
Day
L.S.
L.S.
L.S.

0.65
0.60
0.27
0.05
0.05
0.04
26.91
13.52
53.82

247.00
247.00
260.00
301.00
273.00
260.00
1.49
1.49
1.49

Cost for 1.00 Cum

Rate per One Cum :

Rs 2242.16

Item Code : 1643-B

ANNEXURE-B for item No. 16.43_x000D_
Code

Details of Cost for : 8.50 Cum

Unit
Quantity

Description

Rate

Part-1 Cost of materials :

Assuming that pavement 30m long 22.5m wide and 0.30m
deep having panel size 6.15x4.6lx0.30m or 8.50cum laid in a
day of 8 hrs. Hence form work to be provided for 2 days.
Material for 61.5m long 46.10m wide pavement
22x30.75 = 676.50
2x46.10 = 92.20
Total = 768.70m.
768.70 @ 83.10 kg/ m = 25.44 M.T.
Assuming that channel will become unserviceable after use
for 5000 slab (100 times) and salvage value of steel shall fetch

1007
2205

0103
0114
0114

20% of its basic cost.

Steel 254.44 qx4/5x 1/5000 = 0.0407104 q
Carriage of steel 25.44x4/5x1/5000=
0.00407104 tonne
Part-II Labour for assembling, errection, dismetelling and
cleaning the shuttering.
Assuming that 255 labour for steel shuttering shall be
required as compared to timber shuttering. Contact area of 50
slabs of steel shuttering.
Long channel = 11x20x0.30 = 66.00
= 2x45.10x0.30 = 27.06
Total= 93.06
Blacksmith 2nd class
Beldar =
Carriage of steel for extra lead of runway
Beldar =

quint
tonne

0.0407
0.00407

4250.00
77.87

Day
Day

2.86
2.86

273.00
247.00

Day

5.73
247.00
Cost for 8.50 Cum

Rate per One Cum :

Rs 361.86

Item Code : 14.072Y

Cost of materials for scaffolding in item no. 14.72X for main item 14.72
Details of Cost for : 1.00 No.

DSR-12

Page 5 of 2298

Code
7397

Description
Base Jack
(7x2 = 14 Nos)
40mm dia MS tube :
Vertical standards 2.5m length =7x2x9x2.5 =315m
Bracing ledger 1.50m length = 7x2x9x2.5= 513m (?)
Side support 6m length =3x2x6 =36m
Horizontal support 3.00m length
=18x3x3.00m = 162m
Total = 1026m @ 3.67 kg/m =3765.42kg

4009
7387

Mild steel tubes hot finished welded type

kilog
Spigot for standard jointing
Kg
7x2x9 =126 Nos
126 Nos x 0.40m length =50.4 m @ 2.46kg/m
=123.98 kg
Bolts and nuts up to 300 mm in length
quint
2x7x2x9 = 252 Nos @ 0.15 kg/each =37.80 kg
or Say 0.378 qtl
Clamps / Couplers for clamps for fixing M.S tube with
scaffolding = (2x3x2 +2x18x3) = 120 Nos

1034

Unit
Nos

Quantity
14.00

Rate
180.00

3765.42
123.98

48.00
45.00

0.378

5400.00

7346

Double coupler
Challies 3 Nos x 18 line = 54 Nos
Two level plate challies =2x18 line =36 nos
=90 Nos

each

120.00

55.00

7398

Challies
Cup Locks for :
Vertical Standards - 5x7x2x9 = 630 Nos
2x18x19 = 694 Nos
Total = 1314 Nos

Nos

90.00

800.00

7399

Cup locks

Nos

Rate per Each :

1314.00
75.00
Cost for 1.00 No.
Rs 368030.46

Item Code : 3.6

Cement mortar 1:6 (1 cement : 6 fine sand)
Code

0367
2209
0983
2261

0114
0101
9999
9999

Description
MATERIALS
(0.178 cum. of cement = 0.25 tonne)
Cement
Carriage of Cement
Fine sand
Carriage of fine sand
LABOUR
For measuring, carrying, depositing and mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity

tonne
tonne
cum
cum

Day
Day
L.S.
L.S.

Rate per One Cum :

DSR-12

0.25
0.25
1.07
1.07

Rate

5000.00
77.87
640.00
87.60

0.75
247.00
0.07
260.00
26.91
1.49
13.52
1.49
Cost for 1.00 Cum
Rs 2311.69

Page 6 of 2298

Item Code : 3.3

Cement mortar 1:3 (1 cement : 3 fine sand)
Code

0367
2209
0983
2261

0114
0101
9999
9999

Description
MATERIALS
(0.375 cum. of cement = 0.51 tonne)
Cement
Carriage of Cement
Fine sand
Carriage of fine sand
LABOUR
For measuring, carrying, depositing and mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity

tonne
tonne
cum
cum

Day
Day
L.S.
L.S.

Rate per One Cum :

0.51
0.51
1.07
1.07

Rate

5000.00
77.87
640.00
87.60

0.75
247.00
0.07
260.00
26.91
1.49
13.52
1.49
Cost for 1.00 Cum
Rs 3631.93

Item Code : 3.4

Cement mortar 1:4 (1 cement : 4 fine sand)
Code

0367
2209
0983
2261

0114
0101
9999
9999

Description
MATERIALS
(0.268 cum. of cement = 0.38 tonne)
Cement
Carriage of Cement
Fine sand
Carriage of fine sand
LABOUR
For measuring, carrying, depositing and mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity

tonne
tonne
cum
cum

Day
Day
L.S.
L.S.

Rate per One Cum :

0.38
0.38
1.07
1.07

Rate

5000.00
77.87
640.00
87.60

0.75
247.00
0.07
260.00
26.91
1.49
13.52
1.49
Cost for 1.00 Cum
Rs 2971.81

Item Code : 3.2

Cement mortar 1:2 (1Cement : 2 fine sand)
Code
0367
2209
0983
2261
0114
0101
9999
9999

Description
(0.475 cum. of cement = 0.68 tonne)
Cement
Carriage of cement
Fine sand
Carriage of fine sand
(For measuring, carrying, depositing and mixing)
Beldar
Bhisthi
Hire and running charges of mechanical mixer
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity
tonne
tonne
cum
cum
Day
Day
L.S.
L.S.

Rate per One Cum :

DSR-12

0.68
0.68
0.95
0.95

Rate
5000.00
77.87
640.00
87.60

0.75
247.00
0.07
260.00
26.91
1.49
13.52
1.49
Cost for 1.00 Cum
Rs 4407.86

Page 7 of 2298

Item Code : 3.16

White Cement Mortar 1:3 (1 white cement : 3 marble dust)
Code

Description

Details of Cost for : 1.00 Cum

Unit
Quantity

Rate

MATERIALS :
(0.357 cum. of white cement = 0.51 tonne)
0368
2209
0114
0784
0101
2268
9999

White cement
Carriage of cement
Beldar
Marble dust
Bhisthi
Carriage of Marble dust
Hire and running charges of mechanical mixer
For measuring, carrying, depositing and mixing
LABOUR :

tonne
tonne
Day
cum
Day
cum
L.S.

0.51
0.51
0.75
1.07
0.07
1.07
40.43

12000.00
77.87
247.00
1000.00
260.00
87.60
1.49

Cost for 1.00 Cum

Rate per One Cum :

Rs 7587.13

Item Code : 3.12

Cement Mortar 1:2 (1 cement : 2 stone dust)
Code
0367
2209
0101
1159
9999
2267
9999
0114

Description
MATERIALS :
Cement
(0.475 cum. of cement = 0.68 tonne)
Carriage of cement
Bhisthi
Stone dust
Hire and running charges of mechanical mixer
Carraige of Stone dust
Sundries
For measuring, carrying, depositing and mixing
Beldar
LABOUR :

Details of Cost for : 1.00 Cum

Unit
Quantity

Rate

tonne

0.68

5000.00

tonne
Day
cum

0.68
0.07
0.95

77.87
260.00
925.00

L.S.
cum
L.S.

26.91
0.95
13.52

1.49
87.60
1.49

Day

0.75

247.00

Cost for 1.00 Cum

Rate per One Cum :

Rs 4678.61

Item Code : 3.11

Cement mortar 1:6 (1 cement : 6 coarse sand).
Code

0367
2209
0982
2203

0114
0101
9999
9999

DSR-12

Description
MATERIALS
(0.178 cum. of cement = 0.25 tonne)
Cement
Carriage of Cement
Coarse sand
Carriage of Coarse sand
LABOUR
For measuring, carrying, depositing and mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity

tonne
tonne
cum
cum

Day
Day
L.S.
L.S.

Rate

0.25
0.25
1.07
1.07

5000.00
77.87
1120.00
87.60

0.75
0.07
26.91
13.52

247.00
260.00
1.49
1.49

Page 8 of 2298

Cost for 1.00 Cum

Rate per One Cum :

Rs 2825.29

Item Code : 05.009.12-A

Cost of centring and shuttering materials for using once in item 5.9.12 - well steining
Details of Cost for : 1.00 times
Code
Description
Unit
Quantity
Rate
Surface area
Outside area =22/7x4.40x1.00 - 13.82sqm.
= 26.39 sqm.
Assuming that the timber will become unserviceable after
being used 8 times
Planks 38 mm (Seconti class kail wood)
26.39x0.038= 1.00cum.
Wastage 20% = 0.20cum.
= 1.20cum. or 1200 cudm.
1198
Second class kail wood in planks
cum
0.15
25000.00
2nd class kail wood battens
Inside = 2x25x0.50x0.075x0.038 = 0.0712cum.
Outside = 2x28x0.50x0.075x0.038 = 0.0798cum.
= 0.1510cum.
Wastage 5% = 0.0076 cum.
= 0.1586cum. or 158.60 cudm
1197
Second class kail wood in scantling
cum
0.00002
25000.00
Safeda bailies 125mm dia.
Inside: 25x1.00 = 25.00m
Outside: 28x1.00 = 28.00m
= 53.00m
0302
Safeda ballies 125 mm diameter
metre
6.625
37.00
Cost for 1.00 times
Rate per One Time :

Rs 3995.63

Item Code : 3.9

Cement mortar 1:4 (1 cement : 4 coarse sand).
Code

0367
2209
0982
2203

0114
0101
9999
9999

Description
MATERIALS
(0.214 cum. of cement = 0.31 tonne)
Cement
Carriage of Cement
Coarse sand
Carriage of Coarse sand
LABOUR
For measuring, carrying, depositing and mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity

tonne
tonne
cum
cum

Day
Day
L.S.
L.S.

Rate per One Cum :

0.38
0.38
1.07
1.07

Rate

5000.00
77.87
1120.00
87.60

0.75
247.00
0.07
260.00
26.91
1.49
13.52
1.49
Cost for 1.00 Cum
Rs 3485.41

Item Code : 3.8

Cement mortar 1:3 (1 cement : 3 coarse sand)
Details of Cost for : 1.00 Cum

DSR-12

Page 9 of 2298

Code

0367
2209
0982
2203

0114
0101
9999
9999

Description
MATERIALS
(0.357 cum. of cement = 0.51 tonne)
Cement
Carriage of Cement
Coarse sand
Carriage of Coarse sand
LABOUR
For measuring, carrying, depositing and mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries

Unit

tonne
tonne
cum
cum

Day
Day
L.S.
L.S.

Rate per One Cum :

Quantity

Rate

0.51
0.51
1.07
1.07

5000.00
77.87
1120.00
87.60

0.75
247.00
0.07
260.00
26.91
1.49
13.52
1.49
Cost for 1.00 Cum
Rs 4145.53

Item Code : 3.18

Code

0811
0114
0101
9999

Description
Detail of cost for one cum
MATERIALS
Mud (dry)
LABOUR
Beldar
Bhisti
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity

cum
Day
Day
L.S.

Rate per One Cum :

1.08

Rate

50.00

0.63
247.00
0.315
260.00
6.45
1.49
Cost for 1.00 Cum
Rs 301.12

Item Code : 3.15

White cement mortar 1:2 (1 white cement : 2 marble
Code

0368
2209
0784
2268

0114
0101
9999
9999

Description
MATERIALS
(0.475 cum. of white cement = 0.68 tonne)
White Cement
Carriage of White Cement
Marble dust
Carriage of Marble dust
LABOUR
For measuring, carrying, depositing and mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity

tonne
tonne
cum
cum

Day
Day
L.S.
L.S.

Rate per One Cum :

0.68
0.68
0.95
0.95

Rate

12000.00
77.87
1000.00
87.60

0.75
247.00
0.07
260.00
26.91
1.49
13.52
1.49
Cost for 1.00 Cum
Rs 9509.86

Item Code : 1681-Y

Sub-analysis item for fabication charges in item no. 16.81
Code
1681-PY

DSR-12

Details of Cost for : 2.50 m

Description
Unit
Quantity
Plants and Labour required for sub anlaysis 16.81Y for item job
1.00
16.81

Rate
1380.00

Page 10 of 2298

1681-PY

Plants and Labour required for sub anlaysis 16.81Y for item job
16.81

0.10

1380.00

Cost for 2.50 m

Rate per One Metre :

Rs 607.20

Item Code : 1681-S

Cost of material for using once in item code 1681-X (sub analysis for 16.81)
Code
1681-P
1681-P
1681-P

Description
Cost materials in sub-analysis of 16.81X for item 16.81
Cost materials in sub-analysis of 16.81X for item 16.81
Cost materials in sub-analysis of 16.81X for item 16.81

Details of Cost for : 40.00 times

Unit
Quantity
Rate
m
1.00
6511.63
m
0.10
6511.63
m
-0.50
6511.63
Cost for 40.00 times

Rate per One Time :

Rs 97.67

Item Code : 14.72X

Cost of scaffolding materials for using once in the item code 14.72
Code
14.072Y
14.072Y
14.072Y

Details of Cost for : 40.00 Nos

Description
Unit
Quantity
Rate
Cost of materials for scaffolding in item no. 14.72X for main Nos
1.00
368030.46
item 14.72
Cost of materials for scaffolding in item no. 14.72X for main Nos
0.10
368030.46
item 14.72
Cost of materials for scaffolding in item no. 14.72X for main Nos
-0.25
368030.46
item 14.72
Cost for 40.00 Nos
Rate per Each :

Rs 7820.65

Item Code : 1681-X

Sub analysis item for material component of Item No. 16.81
Code
1681-S

Description

Details of Cost for : 2.50 m

Unit
Quantity

MATERIALS:
Cost of material for using once in item code 1681-X (sub times
analysis for 16.81)

1.00

Rate
97.67

Cost for 2.50 m

Rate per One Metre :

DSR-12

Rs 39.07

Page 11 of 2298

Analysis for SCHEDULE MAIN ITEMS : With water charges (1%) and with CP & OH (15%)
Item Code: 2.1.1
E/W in surface excavation .. All kinds of soil
Code
0114
0115

Description
LABOUR:
Beldar
Coolie

Details of Cost for : 100.00 Sqm

Unit
Quantity
Day
Day

7.20
6.00

Add water charges @ 1% on

Rate
247.00
247.00
Total:
3260.40

Add C.P & OH @15% on

3293.00
Cost for 100.00 Sqm
Rate per 100 Sqm:
Rate as per DSR-12:

Rs 3786.95
Rs 3786.95

Item Code: 2.2.1

E/W in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, .. .., lead upto 50 m and lift upto 1.5 m :
All kinds of soil
Details of Cost for : 10.00 Cum
Code
Description
Unit
Quantity
Rate
LABOUR :
Roller charges (one roller does 1850 sqm. of consolidation per
day)
0114
Beldar
Day
5.90
247.00
0115
Coolie
Day
3.60
247.00
0101
Bhisthi
Day
0.40
260.00
0113
Chowkidar
Day
0.008
247.00
0003
Hire charges of road roller
Day
0.008
1500.00
1235
Diesel
litre
0.144
41.29
2342
Carriage of diesel
quint
0.0014
8.76
9999
Sundries
L.S.
2.73
1.49
Total:
Add water charges @ 1% on
2474.51
Add C.P & OH @15% on
2499.26
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 287.42
Rs 287.40

Item Code: 2.3.1

Banking excavated earth . All kinds of soils
Code
0114
0115
0101

0003
0113
1235
2342
9999

DSR-12

Description
LABOUR :
Beldar
Coolie
Bhisthi
Roller Charges :
(one roller does 1850 sqm of consolidation per day )
Hire charges of road roller
Chowkidar
Diesel
Carriage of diesel
Sundries

Details of Cost for : 10 cum

Unit
Quantity
Day
Day
Day

Day
Day
litre
quint
L.S.

Rate

2.20
3.60
0.40

247.00
247.00
260.00

0.008
0.008
0.144
0.0014
2.73

1500.00
247.00
41.29
8.76
1.49

Page 12 of 2298

Add water charges @ 1% on

Total:
1560.61

Add C.P & OH @15% on

1576.22
Cost for 10cum
Rate per One Cum :
Rate as per DSR-12:

Rs 181.27
Rs 181.25

Item Code: 2.4

Deduct for not rolling with power roller.
Code
0113
0003
1235
2342
9999

Description
LABOURChokidar
Roller charges & Hire Charges
Diesel
Carriage of diesel
Sundries

Details of Cost for : -10.00 Cum

Unit
Quantity
Day
Day
litre
quint
L.S.

0.008
0.008
0.144
0.0014
1.82

Add water charges @ 1% on

Rate
247.00
1500.00
41.29
8.76
1.49
Total:
22.65

Add C.P & OH @15% on

22.88
Cost for -10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

-Rs 2.63
-Rs 2.65

Item Code: 2.5

Deduct for not watering the excavated earth for banking.
Code
0101

Description
LABOURBhishti

Details of Cost for : -10.00 Cum

Unit
Quantity
Day

0.40

Add water charges @ 1% on

Rate
260.00
Total:
104.00

Add C.P & OH @15% on

105.04
Cost for -10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

-Rs 12.08
-Rs 12.10

Item Code: 2.6.1

E/W in excavation over areas (exceeding 30cm in depth. 1.5m in width 10sqm on plan) - All kinds of soil
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Average output of Hydraulic Excavator per hour = 30cum.

0020
0018
0128
0115

MACHINERY :
Hydraulic Excavator (3D) with driver and fuel
Hire and running charges of loader.
Mate
Coolie
(beldar / coolie)

Day
Day
Day
Day

0.04125
0.04125
0.40
2.00

Rate

7500.00
5000.00
260.00
247.00
Total:

DSR-12

Page 13 of 2298

Add water charges @ 1% on

1113.63

Add C.P & OH @15% on

1124.77
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 129.35
Rs 129.35

Item Code: 2.7.1

E/W in excavation over areas (exceeding 30cm in depth. 1.5m in width 10sqm on plan) - Ordinary rock
Details of Cost for : 10.00 Cum
Code
Description
Unit
Quantity
MACHINERY
0020
Hydraulic Excavator (3D) with driver and fuel.
Day
0.0625
0017
Hire and running charges of tipper
Day
0.0625
0132
Excavators
Day
0.705
0133
Breakers
Day
1.59
0134
Hole driller
Day
0.355
0114
Beldar
Day
0.50
0115
Coolie
Day
1.35
9999
Sundries
L.S.
10.79
Add water charges @ 1% on

Rate
7500.00
1700.00
247.00
247.00
247.00
247.00
247.00
1.49
Total:
1702.59

Add C.P & OH @15% on

1719.62
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 197.76
Rs 197.75

Item Code: 2.7.2

E/W in over areas (exceeding 30 cm in depth, 1.5m in width , 10sqm on plan) - Hard rock (requiring blasting)

Code
0020
0017
0132
0133
0134
0114
0115
0325
0326
9999

Description
MACHINERY
Hydraulic Excavator (3D) with driver and fuel.
Hire and running charges of tipper
Rock Excavator
Rock Breaker
Rock Hole Driller
Beldar
Coolie
Blasting powder
Blasting fuse (fuse wire)
Sundries

Details of Cost for : 10.00 Cum

Unit
Quantity
Day
Day
Day
Day
Day
Day
Day
kilog
each
L.S.

0.125
0.125
1.06
2.825
0.885
0.45
1.35
3.93
4.00
16.12

Add water charges @ 1% on

Rate
7500.00
1700.00
247.00
247.00
247.00
247.00
247.00
35.00
15.00
1.49
Total:
2994.37

Add C.P & OH @15% on

3024.31
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 347.80
Rs 345.20

Item Code: 2.7.3

E/W in over areas (exceeding 30cm depth, 1.5m in width , 10sqm on plan) - Hard rock (blasting prohibited)

DSR-12

Page 14 of 2298

Code
0020
0017
0132
0133
0135
0103
0114
0115
9999

Description
MACHINERY:
Hydraulic Excavator (3D) with driver and fuel
Hire and running charges of tipper
Excavators
Breakers
Stone Chisellers
Black smith 2nd class
Beldar
Coolie
Sundries

Details of Cost for : 10.00 Cum

Unit
Quantity
Day
Day
Day
Day
Day
Day
Day
Day
L.S.

0.125
0.125
2.47
6.00
1.06
0.175
0.75
1.80
16.12

Add water charges @ 1% on

Rate
7500.00
1700.00
247.00
247.00
260.00
273.00
247.00
247.00
1.49
Total:
4219.34

Add C.P & OH @15% on

4261.53
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 490.08
Rs 490.10

Item Code: 2.8.1

E/W excavation in foundation trenches .. .. All kinds of soil.
Code
0020
0018
0128
0115

Description
MACHINERY:
Hydraulic Excavator (3D) with driver and fuel
Hire and running charges of loader.
Mate
Coolie

Details of Cost for : 10.00 Cum

Unit
Quantity
Day
Day
Day
Day

0.04125
0.04125
0.40
2.05

Add water charges @ 1% on

Rate
7500.00
5000.00
260.00
247.00
Total:
1125.98

Add C.P & OH @15% on

1137.24
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 130.78
Rs 130.80

Item Code: 2.9.1

E/W excavation in foundation trenches .. .. Ordinary rok
Code
0020
0017
0132
0134
0134
0114
0115
9999

Description
MACHINERY:
Hydraulic Excavator (3D) with driver and fuel
Hire and running charges of tipper
LABOUR:
Excavators
Hole drillers
Hole drillers
Beldar
Coolie
Sundries

Details of Cost for : 10.00 Cum

Unit
Quantity

Rate

Day
Day

0.0625
0.0625

7500.00
1700.00

Day
Day
Day
Day
Day
L.S.

0.885
1.765
0.53
0.50
1.30
13.52

247.00
247.00
247.00
247.00
247.00
1.49
Total:
1825.21

Add water charges @ 1% on

Add C.P & OH @15% on

1843.46
Cost for 10.00 Cum

DSR-12

Page 15 of 2298

Rate per One Cum:

Rate as per DSR-12:

Rs 212.00
Rs 212.00

Item Code: 2.9.2

E/W excavation in foundation trenches .. .. Hard rock (requiring blasting)
Code
0020
0017
0132
0133
0134
0114
0115
0325
0326
9999

Details of Cost for : 10.00 Cum

Unit
Quantity

Description
MACHINERY :
Hydraulic Excavator (3D) with driver and fuel
Hire and running charges of tipper
LABOUR:
Excavators
Breakers
Hole drillers
Beldar
Coolie
Blasting powder
Blasting fuse
Sundries

Rate

Day
Day

0.125
0.125

7500.00
1700.00

Day
Day
Day
Day
Day
kilog
each
L.S.

1.24
3.00
1.06
0.50
1.30
6.42
7.00
18.85

247.00
247.00
247.00
247.00
247.00
35.00
15.00
1.49
Total:
3261.49

Add water charges @ 1% on

Add C.P & OH @15% on

3294.10
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 378.82
Rs 378.80

Item Code: 2.9.3

E/W excavation in foundation trenches .. .. Hard rock (blasting prohibited)
Code
0020
0017
0132
0133
0135
0103
0114
0115
9999

Description
MACHINERY
Hydraulic Excavator (3D) with driver and fuel.
Hire and running charges of tipper
LABOURExcavators
Breakers
Chisellers
Black smith II class
Beldar
Coolie
Sundries

Details of Cost for : 10.00 Cum

Unit
Quantity

Rate

Day
Day

0.125
0.125

7500.00
1700.00

Day
Day
Day
Day
Day
Day
L.S.

2.65
6.175
1.06
0.175
0.75
1.50
17.94

247.00
247.00
260.00
273.00
247.00
247.00
1.49
Total:
4235.64

Add water charges @ 1% on

Add C.P & OH @15% on

4278.00
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 491.97
Rs 491.95

Item Code: 2.10.1.1

Excavating trenches for pipes, cables, etc - All kinds of soil - Pipes, cables etc, not exceeding 80 mm dia.
Details of Cost for : 180.00 m

DSR-12

Page 16 of 2298

Code

Description
Slope assumed 1 in 200.
Earth work and fillingMinimum depth of trench 60cm.
Average depth = (0.6+1.50)/2 = 1.05
Width for this depth 0.45 cm
180x0.45xl.05 = 85.05 cum

Unit

Quantity

Rate

02.008.01

E/W excavation in foundation trenches .. .. All kinds of soil.

Cum

85.05

130.78

02.025

Filling available excavated earth (excluding rock) .. ..

Cum

85.05

83.80
Total:
0.00

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

0.00
Cost for 180.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 101.39
Rs 101.40

Item Code:
Excavating trenches for pipes, cables, etc - All kinds of soil - Pipes, cables etc, exceeding 80 mm dia upto 300mm

Code

Details of Cost for : 110.00 m

Unit
Quantity

Description

Rate

Slope assumed 1 in 200.

Earth work and fillingMinimum depth of trench = 0.75+0.20 = 0.95m
Average depth = (1.50+0.95)/2 = 1.225M
Width = 0.40 + 0.20 = 0.60 m
110x0.60x1.225 = 80.85 cum
5% for collars = 4.04 cum
Total = 84.89 cum
02.008.01

E/W excavation in foundation trenches .. .. All kinds of soil.

Cum

84.89

130.78

02.025

Filling available excavated earth (excluding rock) .. ..

Cum

84.89

83.80
Total:
0.00

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

0.00
Cost for 110.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 165.60
Rs 165.60

Item Code: 2.10.1.3

Excavating trenches All kinds of soil Pipes 300 to 600 mm.
Code

DSR-12

Details of Cost for : 60.00 m

Description
Unit
Quantity
Details of cost for 60m length of a pipe of an average dia. say
450mm.
Slope assumed 1 in 200.
Earth work and fillingMinimum depth of trench 0.75+0.45= 1.20m
Average depth = (1.50+1.20)/2 =1.35
Width = 0.40 + 0.45 = 0.85 m
60x0.85xl.35 = 68.85 cum

Rate

Page 17 of 2298

02.008.01

5% for collars = 3.44 cum

Total = 72.29 cum
E/W excavation in foundation trenches .. .. All kinds of soil.

72.29

130.78

02.025

Filling available excavated earth (excluding rock) .. ..

72.29

83.80
Total:
0.00

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

0.00
Cost for 60.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 258.53
Rs 258.55

Item Code: 2.13.1.1

Excavating trenches for pipes, cables, etc - Ordinary rock - Pipes, cables etc, not exceeding 80 mm dia.
Details of Cost for : 180.00 m
Code
Description
Unit
Quantity
Slope assumed 1 in 200
ExcavationQuantity same as in item No.2.10.1.1
02.009.01 E/W excavation in foundation trenches .. .. Ordinary rok
85.05
Refilling, ramming and watering
02.025
Filling available excavated earth (excluding rock) .. ..
85.05
Extra labour for ramming of rock
0114
Beldar (A)
Day
2.00
Add water charges @ 1% except on [A]+[B] i.e on

Rate

212.00
83.80
247.00
Total:
494.00

Add C.P & OH @15% except on [A]+[B] i.e on

498.94
Cost for 180.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 142.95
Rs 142.95

Item Code: 2.13.1.2

Excavating trenches for pipes, cables, etc - Ordinary rock - Pipes, cables etc, exceeding 80mm dia not exceeding 300mm

Code

02.009.01
02.025
0114

Details of Cost for : 80.00 m

Description
Unit
Quantity
Details of cost for 80 m length of pipe of an average dia. Say
200mm.
Slope assumed 1 in 200
ExcavationMinimum depth of trench.
0.75+0.15+0.20 = 1.10m
Average depth = ( 1.10 + 1.50)/2 = 1.30m
Minimum width of trench = 0.90m
80x0.90x1.30 = 93.60 cum.

E/W excavation in foundation trenches .. .. Ordinary rok

Refilling, ramming and watering
Filling available excavated earth (excluding rock) .. ..
Extra labour for ramming of rock
Beldar

Cum

93.60

212.00

Cum

93.60

83.80

Day

2.20

247.00
Total:
543.40

Add water charges @ 1% except on [A]+[B] i.e on

DSR-12

Rate

Page 18 of 2298

Add C.P & OH @15% except on [A]+[B] i.e on

548.83
Cost for 80.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 353.98
Rs 353.95

Item Code: 2.13.1.3

Excavating trenches Ordinary rocks : Pipes 300 to 600 mm.
Code

02.009.01
02.025
0114

Details of Cost for : 30.00 m

Description
Unit
Quantity
Details of cost for 30 m. length of a pipe of an average dia. say
450mm.
Slope assumed 1 in 200.
ExcavationMinimum depth of trench 0.75+0.15+0.15= 1.35m.
Average depth = (1.35+ 1.50)/2 = 1.425 m.
Width of trench = 0.90 m.
30x0.90x1.425 =30.475 cum.
5% for collors = 1.924 cum
40.399 cum
E/W excavation in foundation trenches .. .. Ordinary rok
40.399
Refilling, ramming and watering
Filling available excavated earth (excluding rock) .. ..
40.399
Beldar
Day
0.94
Add water charges @ 1% except on [A]+[B] i.e on

Rate

212.00
83.80
247.00
Total:
232.18

Add C.P & OH @15% except on [A]+[B] i.e on

234.50
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 407.32
Rs 407.30

Item Code: 2.13.2.1

Excavating trenches Hard rock (requi blasting) : Pipes, upto 80 mm dia.
Code

02.009.02

02.025
0114

Details of Cost for : 180.00 m

Description
Unit
Quantity
Details of cost for 180 m length of a pipe of a average dia. say
40mm.
Slope assumed 1 in 200
ExcavationQuantity same as in item No.2.10.1.1
E/W excavation in foundation trenches .. .. Hard rock
85.05
(requiring blasting)
Refilling, ramming and watering
Filling available excavated earth (excluding rock) .. ..
85.05
Extra labour for ramming of rock
Beldar
Day
2.50
Add water charges @ 1% except on [A]+[B] i.e on

Rate

378.82

83.80
247.00
Total:
617.50

Add C.P & OH @15% except on [A]+[B] i.e on

623.68
Cost for 180.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 222.57
Rs 222.55

Page 19 of 2298

Item Code: 2.13.2.2

Excavating trenches Hard rock (requi blasting) : Pipes 80 mm to 300 mm dia.
Details of Cost for : 80.00 m
Code
Description
Unit
Quantity
Details of cost for 80 m length of a pipe of an average dia. say
200mm.
Slope assumed 1 in 200
ExcavationQuantity same as in item No.2.13.1.2
02.009.02 E/W excavation in foundation trenches .. .. Hard rock
93.60
(requiring blasting)
Refilling, ramming and watering
02.025
Filling available excavated earth (excluding rock) .. ..
93.60
Extra labour for ramming of rock
0114
Beldar
Day
2.75
Add water charges @ 1% except on [A]+[B] i.e on

Rate

378.82

83.80
247.00
Total:
679.25

Add C.P & OH @15% except on [A]+[B] i.e on

686.04
Cost for 80.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 551.13
Rs 549.80

Item Code: 2.13.2.3

Excavating trenches Hard rock (requi blasting) : Pipes 300 to 600 mm.
Code

02.009.02

02.025
0114

Details of Cost for : 30.00 m

Description
Unit
Quantity
Details of cost for 30 m length of a pipe of an average dia. Say
450mm.
Slope assumed 1 in 200
ExcavationQuantity same as in item No.2.13.1.3
E/W excavation in foundation trenches .. .. Hard rock
40.399
(requiring blasting)
Refilling, ramming and watering
Filling available excavated earth (excluding rock) .. ..
40.399
Extra labour for ramming of rock
Beldar
Day
1.17
Add water charges @ 1% except on [A]+[B] i.e on

Rate

378.82

83.80
247.00
Total:
288.99

Add C.P & OH @15% except on [A]+[B] i.e on

291.88
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 634.17
Rs 634.15

Item Code: 2.13.3.1

Excavating trenches Hard rock (blasting prohi) : Pipes upto 80 mm dia.
Code

DSR-12

Details of Cost for : 180.00 m

Description
Unit
Quantity
Details of cost for 180 m length of a pipe of a average dia. say
40mm.
Slope assumed 1 in 200
ExcavationQuantity same as in item No.2.10.1.1

Rate

Page 20 of 2298

02.009.03

02.025
0114

E/W excavation in foundation trenches .. .. Hard rock (blasting

prohibited)
Refilling, ramming and watering
Filling available excavated earth (excluding rock) .. ..
Extra labour for ramming of rock
Beldar
Day

85.05

491.97

85.05

83.80

2.50

247.00
Total:
617.50

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

623.68
Cost for 180.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 276.04
Rs 276.05

Item Code: 2.13.3.2

Excavating trenches Hard rock (blasting prohi) : Pipes 80 mm to 300 mm dia.
Details of Cost for : 80.00 m
Code
Description
Unit
Quantity
Details of cost for 80 m length of a pipe of an average dia. say
200mm.
Slope assumed 1 in 200
ExcavationQuantity same as in item No.2.13.1.2
02.009.03 E/W excavation in foundation trenches .. .. Hard rock (blasting
93.60
prohibited)
Refilling, ramming and watering
02.025
Filling available excavated earth (excluding rock) .. ..
93.60
Extra labour for ramming of rock
0114
Beldar
Day
2.75
Add water charges @ 1% except on [A]+[B] i.e on

Rate

491.97

83.80
247.00
Total:
679.25

Add C.P & OH @15% except on [A]+[B] i.e on

686.04
Cost for 80.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 683.51
Rs 683.50

Item Code: 2.13.3.3

Excavating trenches Hard rock (blasting prohi) : Pipes 300 to 600 mm.
Code

02.009.03

02.025
0114

DSR-12

Details of Cost for : 30.00 m

Description
Unit
Quantity
Details of cost for 30 m length of a pipe of an average dia. say
450mm.
Slope assumed 1 in 200
ExcavationQuantity same as in item No. 2.13.1.3
E/W excavation in foundation trenches .. .. Hard rock (blasting
40.399
prohibited)
Refilling, ramming and watering
Filling available excavated earth (excluding rock) .. ..
40.399
Extra labour for ramming of rock
Beldar
Day
1.17

Rate

491.97

83.80

Add water charges @ 1% except on [A]+[B] i.e on

247.00
Total:
288.99

Add C.P & OH @15% except on [A]+[B] i.e on

291.88

Page 21 of 2298

Cost for 30.00 m

Rate per One Metre:
Rate as per DSR-12:

Rs 786.54
Rs 786.50

Item Code: 2.16.1

Close timbering in trenches :- Depth not exceeding 1.5 mtr.
Code

1198

1197

0302

2204
0112
0114
9999

Description
Details of cost for a trench 30m long and 1.5m deep area
2x30x1.5=90 sqmMATER1ALS
The Material can be used four times on the same work and
after use of material credit is given @ 75% of cost
Poling boards of 2nd class Kail wood planks:
90x0.038 = 3.42 cum = 3420 dm
Qty taken for cost of using once after deducting for credit =
3420xx = 213.75 dm
Wallings l00mmx 100mm of 2nd class kail
wood in scantling: 4x30x0.10x0.10 = 1.20cum
= 1200 dm
Qty taken for cost of using once after deducting for credit =
1200xx = 75 dm
Safeda Balli struts (12.5mm dia and 1.5m long): 2x17x1.50 =
51m
Qty taken for cost of using once after deducting for credit =
51 xx = 3.1875 m
CARRIAGE
Poling boards = 3.42 cum
Walling =1.20 cum.
Balli struts: 3.14/4x(0.125) x51 = 0.63 cum
Total of carriage = 5.25x = 1.3125 cum.
Carpenter llnd class
Beldar
Sundries

Details of Cost for : 90.00 Sqm

Unit
Quantity

Rate

cum

0.21375

25000.00

cum

0.075

25000.00

metre

3.1875

37.00

cum
Day
Day
L.S.

1.3125
0.50
1.00
26.91

100.11
273.00
247.00
1.49
Total:
7891.68

Add water charges @ 1% on

Add C.P & OH @15% on

7970.60
Cost for 90.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 101.85
Rs 101.85

Item Code: 2.16.2

Close timbering in trenches :- Depth from 1.5 to 3 mtr.
Code

1198

1197

DSR-12

Details of Cost for : 90.00 Sqm

Description
Unit
Quantity
Rate
Details of cost for a trench 30m long and 1.5m deep area
2x30x 1.50=90.00 sqmMATERIALS
The Material can be used four times on the same work and
after use of material credit is given @ 75% of cost
Poling boards of 2nd class Kail wood planks:
cum
0.21375
25000.00
90x0.038 = 3.42 cum = 3420 dm
Qty taken for cost of using once after
deducting for credit = 3420xx = 213.75 cudm
Walings 100 mmx 100mm of 2nd class kail
cum
0.075
25000.00

Page 22 of 2298

0302

2204
0112
0114
9999

wood in scantling: 4x30x0.10x0.10 = 1.20cum

= 1200 cudm
Qty taken for cost of using once after deducting for credit =
1200xx = 75 dm
Safeda Balli struts (12.5mm dia and 1.50m
metre
long): 2x17x1.50 = 51m
Qty taken for cost of using once after
deducting for credit = 51
CARRIAGE
Poling boards = 3.42 cum
Walling =1.20 cum.
Balli struts: 3.14/4x(0.125)^3 x51 =0.63 cum
Total of carriage = 5.25x/4 = 1.3125 cum.
cum
Carpenter Ilnd class
Day
Beldar
Day
Sundries
L.S.

3.1875

37.00

1.3125
0.75
2.00
40.43

100.11
273.00
247.00
1.49
Total:
8227.07

Add water charges @ 1% on

Add C.P & OH @15% on

8309.34
Cost for 90.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 106.17
Rs 106.20

Item Code: 2.16.3

Close timbering in trenches :- Depth from 3 to 4.5 mtr.
Code

1198

1197

0302

2204
0112
0114
9999

Description
Details of cost for a trench 30m long and 1.50m deep area
2x30x 1.5=90 sqmMATERIALS
The Material can be used four times on the same work and
after use of material credit is given @ 75% of cost
Poling boards of 2nd class Kail wood planks :
90x0.038 = 3.42 cum = 340 cudm
Qty taken for cost of using once after deducting for credit =
3420xx = 213.75 cudm
Wallings 100mmx 100mm of 2nd class kail
wood in scantling: 4x30x0.10x0.10 = I.20cum
= 1200 cudm
Qty taken for cost of using once after
deducting for credit = 1200xx = 75 cudm
Safeda Balli struts (12.5mm dia and 1.5m long): 2x17x1.5 =
51m
Qty taken for cost of using once after
deducting for credit = 51xx = 3.1875 m
CARRIAGE
Poling boards = 3.42 cum
Walling - = 1.20 cum.
Balli struts: 3.14/4x(0.125)^3 x51 =0.63 cum
Total of carriage = 5.25x = 1.3125 cum.
LABOUR
CarpenferTmd class
Beldar
Sundries

Details of Cost for : 90.00 Sqm

Unit
Quantity

cum

0.21375

25000.00

cum

0.075

25000.00

metre

3.1875

37.00

cum

1.3125

100.11

Day
Day
L.S.

1.50
4.00
80.73

273.00
247.00
1.49
Total:
8985.87

Add water charges @ 1% on

DSR-12

Rate

Page 23 of 2298

Add C.P & OH @15% on

9075.73
Cost for 90.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 115.97
Rs 115.95

Item Code: 2.17.1

Close timbering in case of shafts,wells,cesspits,manholes Depth not exceeding 1.5 mtr.
Details of Cost for : 6.60 Sqm
Code
Description
Unit
Quantity
Details of cost for a manhole 1.2m x 1.0m x1.5m- Surface
area: 2x(1.2+1.0)x1.5 = 6.6sqm
MATERIALS
The Material can be used four times on the same work and
after use of material credit is given @ 75% of cost
1198
Poling boards of 2nd class Kail wood planks:
cum
0.01568
6.60x0.038 = 0.251 cum = 251 cudm
Qty taken for cost of using once after
deducting for credit = 251 x x = 15.6875 cudm
1197
Walling of 2nd class kail wood scantling
cum
0.00512
2x2x1.124x0.10x0.10 =0.045 cum
2x2x0.924x0.10x0.10 = 0.037 cum.
Total Kail wood = 0.082 cum. = 82dm
Qty taken for cost of using once after
deducting for credit = 82xx = 5.125 cudm
0302
Safeda Balli struts (125mm dia and 1.50m long)
metre
0.4118
2x2x0.924 = 3.696
2x2x0.724 = 2.896
Total of balli = 6.592m
Qty taken for cost of using once after
deducting for credit = 6.592xx = 0.1035 m
2204
CARRIAGE
cum
0.1035
Poling boards = 0.251 cum
Walling =0.082 cum.
Balli struts 3.14/4x(0.125)^2 x6.59 = 0.081 cum.
Total of carriage = 0.414 cum = 0.1035 cum.
LABOUR:
0112
Carpenter Ilnd class
Day
0.06
0114
Beldar
Day
0.12
9999
Sundries
L.S.
2.73
Add water charges @ 1% on

Rate

25000.00

25000.00

37.00

100.11

273.00
247.00
1.49
Total:
595.69

Add C.P & OH @15% on

601.65
Cost for 6.60 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 104.83
Rs 104.90

Item Code: 2.17.2

Close timbering in case of shafts,wells,cesspits,manholes Depth exceeding 1.5 m to 3 m.
Details of Cost for : 6.60 Sqm
Code
Description
Unit
Quantity
Details of cost for a manhole 1.2m x 1.0m x1.5m- Surface
area: 2x(1.20+1.0)x1.50 = 6.6 sqm
MATERIALS
The Material can be used four times on the same work and
after use of material credit is given @ 75% of cost

DSR-12

Rate

Page 24 of 2298

1198

1197

0302

2204

0112
0114
9999

Poling boards of 2nd class Kail wood planks:

6.6x0.038 = 0.251 cum = 251 cudm
Qty taken for cost of using once after
deducting for credit = 251 x x = 15.6875 cudm
Walling of 2nd class kail wood scantling
2x2x1.124x0.10x0.10 = 0.045 cum
2x2x0.924x0.10x0.10 = 0.037 cum.
Total Kail wood = 0.082 cum. = 82 cudm
Qty taken for cost of using once after
deducting for credit = 82xx = 5.125 cudm
Safeda Balli struts (125mm dia and 1.5m long)
2x2x0.924 = 3.696
2x2x0.724 = 2.896
Total of balli = 6.592m
Qty taken for cost of using once after
-deducting for credit = 6.592xx = 0.1035 m
CARRIAGE
Poling boards = 0.251 cum
Walling = 0.082 cum.
Balli struts 3.14/4x(0.125)^2 x6.59 = 0.081 cum.
Total of carriage = 0.414 cum x = 0.1035 cum
LABOUR:
Carpenter Ilnd class
Beldar
Sundries

cum

0.01569

25000.00

cum

0.00513

25000.00

metre

0.4118

37.00

cum

0.1035

100.11

Day
Day
L.S.

0.12
0.25
5.46

273.00
247.00
1.49
Total:
648.75

Add water charges @ 1% on

Add C.P & OH @15% on

655.24
Cost for 6.60 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 114.17
Rs 114.15

Item Code: 2.17.3

Close timbering in case of shafts,wells,cesspits,manholes Depth exceeding 3 m to 4.5 m.
Details of Cost for : 6.60 Sqm
Code
Description
Unit
Quantity
Details of cost for a manhole 1.2m x 1.0m x 1.5m- Surface
area: 2x( 1.2+1.0)x 1.5 = 6.6sqm
MATERIALS
The Material can be used four times on the same work and
after use of material credit is given @ 75% of cost
1198
Poling boards of 2nd class Kail wood planks:
cum
0.01569
6.6x0.038 = 0.251 cum = 251 cudm
Qty taken for cost of using once after
deducting for credit = 251xx = 15.6875 cudm
1197
Walling of 2nd class kail wood scantling
cum
0.00512
2x2x1.124x0.10x0.10 = 0.045 cum
2x2x0.924x0.10x0.10 = 0.037 cum.
Total Kail wood = 0.082 cum. = 82 cudm
Qty taken for cost of using once after
deducting for credit = 82xx = 5.125 cudm
0302
Safeda Balli struts (12.5mm dia and 1.50m long)
metre
0.4118
2x2x0.924 = 3.696
2x2x0.724 = 2.896
Total of balli = 6.592m
Qty taken for cost of using once after
-deducting for credit = 6.592xx = 0.1035 m

DSR-12

Rate

25000.00

25000.00

37.00

Page 25 of 2298

2204

0112
0114
9999

CARRIAGE
Poling boards = 0.251 cum
Walling = 0.082 cum.
Balli struts 3.14/4x(0.125)^2 x6.59 = 0.081 cum.
Total of carriage = 0.414 cum x = 0.1035 cum
LABOUR:
Carpenter Ilnd class
Beldar
Sundries

cum

0.1035

100.11

Day
Day
L.S.

0.19
0.38
8.06

273.00
247.00
1.49
Total:
703.59

Add water charges @ 1% on

Add C.P & OH @15% on

710.63
Cost for 6.60 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 123.82
Rs 123.85

Item Code: 2.18.1

Close timbering over areas :- Depth not exceeding 1.5 mtr.
Code

1198

1197

0302

2204

0112
0114
9999

Description
Details of cost for an area 30m long and 1.50m deep-Area 30x1.50m = 45 sqm.
MATERIALS
The Material can be used four times on the same work and
after use of material credit is given @ 75% of cost
Poling boards of 2nd class Kail wood planks
250x38mm : 45x0.038 = 1.71 cum = 1.710 cudm
Qty taken for cost of using once after deducting for credit =
1710xx = 106.875 cudm
Walling of Ilnd class kail wood in scantling
100x100mm : 30x0.10x0.10 = 0.30cum = 300 cudm
Qty taken for cost of using once after deducting for credit =
300xx = 18.75 cudm
Raking struts Safeda balleis 12mm dia : 17 x
1.50 =25.5m
Qty taken for cost of using once after deducting for credit =
25.5xx = 1.59 m
CARRIAGE
Poling boards = 1.71 cum
Walling = 0.30cum:
Rakingstruts3.14/4x(0.125)2 = 0.313cum
Total of carriage = 2.323 cum x = 0.581 cum
LABOUR:
Carpenter Ilnd class
Beldar
Sundries

Details of Cost for : 45.00 Sqm

Unit
Quantity

Rate

cum

0.10688

25000.00

cum

0.01875

25000.00

1.59

37.00

cum

0.581

100.11

Day
Day
L.S.

0.25
0.50
31.46

273.00
247.00
1.49
Total:
3496.37

metre

Add water charges @ 1% on

Add C.P & OH @15% on

3531.33
Cost for 45.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 90.25
Rs 90.25

Item Code: 2.18.2

DSR-12

Page 26 of 2298

Close timbering over areas :- Depth from 1.5 to 3 mtr.

Code

1198

1197

0302

2204

0112
0114
9999

Description
Details of cost for an area 30m long and 1.5m deep-Area -30x
1,5m = 45 sqm.
MATERIALS
The Material can be used four times on the same work and
after use of material credit is given @ 75% of cost
Poling boards of 2nd class Kail wood planks
250x38mm : 45x0.038 = 1.71 cum =1710 cudm
Qty taken for cost of using once after deducting for credit =
1710xx = 106.875 cudm
Walling of Ilnd class kail wood in scantling
100x100mm : 30x0.10x0.10 = 0.30cum = 300 cudm
Qty taken for cost of using once after deducting for credit =
300xx = 18.75 cudm
Raking struts Safeda balleis 12mm dia : 17 x 1.5 = 25.5m
Qty taken for cost of using once after deducting for credit =
25.5xx = 1.59 m
CARRIAGE
Poling boards = 1.71 cum
Walling = 0.30 cum
Raking struts 3.14/4x(0.125)^2 = 0.313 cum
Total of carriage = 2.323 cum x = 0.581 cum
LABOUR:
Carpenter Ilnd class
Beldar
Sundries

Details of Cost for : 45.00 Sqm

Unit
Quantity

Rate

cum

0.10688

25000.00

cum

0.01875

25000.00

1.59

37.00

cum

0.581

100.11

Day
Day
L.S.

0.50
1.00
34.06

273.00
247.00
1.49
Total:
3691.99

metre

Add water charges @ 1% on

Add C.P & OH @15% on

3728.91
Cost for 45.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 95.29
Rs 95.30

Item Code: 2.18.3

Close timbering over areas :- Depth from 3 to 4.5 mtr.
Code

1198

1197

0302

2204

DSR-12

Description
Details of cost for an area 30m long and 1.5m deep-Area -30x
1.5m = 45 sqm.
MATERIALS
The Material can be used four times on the same work and
after use of material credit is given @ 75% of cost
Poling boards of 2nd class Kail wood planks
250x38mm : 45x0.038 = 1.71 cum = 1710 cudm
Qty taken for cost of using once after deducting for credit =
1710xx = 106.875 cudm
Walling of Ilnd class kail wood in scantling
100x100mm : 30x0.10x0.10 = 0.30cum =300 cudm
Qty taken for cost of using once after
deducting for credit = 300xx = 18.75 cudm
Raking struts Safeda balleis 12mm dia : 17 x 1.50 = 25.5m
Qty taken for cost of using once after deducting for credit =
25.5xx = 1.59 m
CARRIAGE
Poling boards = 1.71 cum

Details of Cost for : 45.00 Sqm

Unit
Quantity

Rate

cum

0.10688

25000.00

cum

0.01875

25000.00

1.59

37.00

0.581

100.11

metre

cum

Page 27 of 2298

0112
0114
9999

Walling =0.30 cum.

Raking struts 3.14/4x(0.125)^2 = 0.313 cum
Total of carriage = 2.323 cum x = 0.581 cum
LABOUR:
Carpenter Ilnd class
Beldar
Sundries

Day
Day
L.S.

0.75
1.50
47.58

Add water charges @ 1% on

273.00
247.00
1.49
Total:
3903.88

Add C.P & OH @15% on

3942.92
Cost for 45.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 100.76
Rs 100.75

Item Code: 2.19

Extra for planking, strutting and packing materials for cavities (in close timbering):
Details of Cost for : 90.00 Sqm
Code
Description
Unit
Quantity
Rate
1198
Polling Boards of Second class kail wood in planks
90x0.038 = 3.42cum
Less @ 1/8 of qty
cum
2.9925
25000.00
1197
Walling 100mmx100mm : 4x30m x0.1mx 0.1m = 1.20 cum
Less @ 1/8 of Qty as timber is suppose
cum
1.05
25000.00
0302
Safeda ballies 125 mm diameter and 1.5m long) :
2x17x1.5=51m
Less @ 1/8 of Qty as tim
metre
44.63
37.00
2204
CARRIAGE
Polling boards = 3.42cum
Waling = 1.20 cum
Balli struts 3.14x4x(0
cum
2.675
100.11
Total:
Add water charges @ 1% on
102981.60
Add C.P & OH @15% on
104011.42
Cost for 90.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1329.03
Rs 1329.05

Item Code: 2.20.1

Open timbering in trenches including strutting and shoring complete. - Depth not exceeding 1.5 m
Details of Cost for : 90.00 Sqm
Code
Description
Unit
Quantity
MATERIALS:
The material can be used for four times on the same work and
after use of material credit is given @ 75% of cost

1198

1197

DSR-12

Poling board of
Second class kail wood in planks
1.50mx0.25mx0.038m
2x40x1.5x0.25x0.038 = 1.14cum = 1140 cudm
Qty taken for cost of using once after deducting credit
1140x0.25x0.25=71.25 cudm or 0.07125 cum
Second class kail wood in scantling

Rate

cum

0.07125

25000.00

cum

0.075

25000.00

Page 28 of 2298

Walling 100mmx100m : 4x30mx0.10mx0.10m =1.20cum or

1200 cudm
Qty taken for cost of using once after deducting credit
=1200 x 0.25 x 0.25 = 75 cudm or 0.075 cum

0302

2204
0112
0114
9999

Struts of Safeda ballies 125 mm diameter

2x17x1.50m=51m
Qty taken for cost of using once after deducting credit
51x0.25x0.25 = 3.18m
CARRIAGE :
Poling board : 1.14 cum
Walling : 1.20 cum
Ballies struts - 3.14/4x(0.125)^2 : 0.63 cum
Total of carriage = 2.97 x 1 / 4 = 0.74 cum
Carraige of Timber
LABOUR:
Carpenter 2nd class
Beldar
Sundries

metre

3.18

37.00

cum

0.74

100.11

Day
Day
L.S.

0.25
0.50
19.76

273.00
247.00
1.49
Total:
4069.18

Add water charges @ 1% on

Add C.P & OH @15% on

4109.87
Cost for 90.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 52.52
Rs 52.50

Item Code: 2.20.2

Open timbering in trenches including strutting and shoring complete. - Depth exceeding 1.5 m but not exceeding 3 m

Code

Description

Details of Cost for : 90.00 Sqm

Unit
Quantity

Rate

MATERIALS:
The material can be used for four times on the same work and
after use of material credit is given @ 75% of cost

1198

1197

0302

DSR-12

Poling board of
Second class kail wood in planks
cum
1.50mx0.25mx0.038m
2x40x1.5x0.25x0.038 = 1.14cum = 1140 cudm
Qty taken for cost of using once after deducting credit
1140x0.25x0.25=71.25 cudm or 0.07125 cum
Second class kail wood in scantling
cum
Walling 100mmx100m : 4x30mx0.10mx0.10m =1.20cum or
1200 cudm
Qty taken for cost of using once after deducting credit
=1200 x 0.25 x 0.25 = 75 cudm or 0.075 cum

Struts of Safeda ballies 125 mm diameter

2x17x1.50m=51m
Qty taken for cost of using once after deducting credit
51x0.25x0.25 = 3.18m
CARRIAGE :

metre

0.07125

25000.00

0.075

25000.00

3.18

37.00

Page 29 of 2298

2204
0112
0114
9999

Poling board : 1.14 cum

Walling : 1.20 cum
Ballies struts - 3.14/4x(0.125)^2 : 0.63 cum
Total of carriage = 2.97 x 1 / 4 = 0.74 cum
Carraige of Timber
LABOUR:
Carpenter 2nd class
Beldar
Sundries

cum

0.74

100.11

Day
Day
L.S.

0.50
1.00
33.15

273.00
247.00
1.49
Total:
4280.88

Add water charges @ 1% on

Add C.P & OH @15% on

4323.69
Cost for 90.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 55.25
Rs 55.25

Item Code: 2.20.3

Open timbering in trenches including strutting and shoring complete. - Depth exceeding 3 m but not exceeding 4.5 m

Code

Details of Cost for : 90.00 Sqm

Unit
Quantity

Description

Rate

MATERIALS:
The material can be used for four times on the same work and
after use of material credit is given @ 75% of cost

1198

1197

0302

2204
0112
0114
9999

Poling board of
Second class kail wood in planks
cum
1.50mx0.25mx0.038m
2x40x1.5x0.25x0.038 = 1.14cum = 1140 cudm
Qty taken for cost of using once after deducting credit
1140x0.25x0.25=71.25 cudm or 0.07125 cum
Second class kail wood in scantling
cum
Walling 100mmx100m : 4x30mx0.10mx0.10m =1.20cum or
1200 cudm
Qty taken for cost of using once after deducting credit
=1200 x 0.25 x 0.25 = 75 cudm or 0.075 cum

Struts of Safeda ballies 125 mm diameter

2x17x1.50m=51m
Qty taken for cost of using once after deducting credit
51x0.25x0.25 = 3.18m
CARRIAGE :
Poling board : 1.14 cum
Walling : 1.20 cum
Ballies struts - 3.14/4x(0.125)^2 : 0.63 cum
Total of carriage = 2.97 x 1 / 4 = 0.74 cum
Carraige of Timber
LABOUR:
Carpenter 2nd class
Beldar
Sundries

0.07125

25000.00

0.075

25000.00

metre

3.18

37.00

cum

0.74

100.11

Day
Day
L.S.

1.00
1.75
46.67

273.00
247.00
1.49
Total:
4622.78

Add water charges @ 1% on

DSR-12

Page 30 of 2298

Add C.P & OH @15% on

4669.01
Cost for 90.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 59.66
Rs 59.65

Item Code: 2.21.1

Open timbering in case of shafts, wells, cesspits, manholes and the like including strutting and shoring complete. - Depth not
exceeding 1.5 m
Details of Cost for : 6.60 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
The material can be used for four times on the same work and
after use of material credit is given @ 75% of cost

1198

Poling board of
Second class kail wood in planks
250mm wide and 38mm thick
6x0.25x1.50mx0.038m = 0.086 cum or 86 cudm
Qty taken for cost of using once after deducting credit
86x0.25x0.25=5.3755 cudm or 0.0053755 cum

cum

0.00538

25000.00

0.003

25000.00

0.40

37.00

cum

0.053

100.11

Day
Day
L.S.

0.03
0.06
1.82

273.00
247.00
1.49
Total:
255.33

1197

Second class kail wood in scantling

Walling 100mmx100m :
4x1.20mx0.10mx0.10m = 0.048cum or 48 cudm
Qty taken for cost of using once after deducting credit
=48 x 0.25 x 0.25 = 3 cudm or 0.003 cum

cum

0302

Safeda ballies 125 mm diameter

(4x1.0=4.0m) +(2x1.2=2.4) = 6.4m
Qty taken for cost of using once after deducting credit
6.4x0.25x0.25 = 0.40m
CARRIAGE :

metre

2204
0112
0114
9999

Poling board : 0.086 cum

Walling : 0.048 cum
Ballies struts - 3.14/4x(0.125)^2x6.4=0.079 cum
Total of carriage = 0.213 x 1 / 4 = 0.053 cum
Carraige of Timber
LABOUR:
Carpenter 2nd class
Beldar
Sundries

Add water charges @ 1% on

Add C.P & OH @15% on

257.88
Cost for 6.60 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 44.93
Rs 44.90

Item Code: 2.21.2

Open timbering in case of shafts, wells, cesspits, manholes and the like including strutting and shoring complete. - Depth exceeding
1.5 m but not exceeding 3 m
Details of Cost for : 6.60 Sqm

DSR-12

Page 31 of 2298

Code

1198

Description
Unit
MATERIALS:
The material can be used for four times on the same work and
after use of material credit is given @ 75% of cost

Poling board of
Second class kail wood in planks
250mm wide and 38mm thick
6x0.25x1.50mx0.038m = 0.086 cum or 86 cudm
Qty taken for cost of using once after deducting credit
86x0.25x0.25=5.3755 cudm or 0.0053755 cum

Quantity

Rate

cum

0.00538

25000.00

0.003

25000.00

0.40

37.00

cum

0.053

100.11

Day
Day
L.S.

0.06
0.12
2.73

273.00
247.00
1.49
Total:
279.70

1197

Second class kail wood in scantling

Walling 100mmx100m :
4x1.20mx0.10mx0.10m = 0.048cum or 48 cudm
Qty taken for cost of using once after deducting credit
=48 x 0.25 x 0.25 = 3 cudm or 0.003 cum

cum

0302

Safeda ballies 125 mm diameter

(4x1.0=4.0m) +(2x1.2=2.4) = 6.4m
Qty taken for cost of using once after deducting credit
6.4x0.25x0.25 = 0.40m
CARRIAGE :

metre

2204
0112
0114
9999

Poling board : 0.086 cum

Walling : 0.048 cum
Ballies struts - 3.14/4x(0.125)^2x6.4=0.079 cum
Total of carriage = 0.213 x 1 / 4 = 0.053 cum
Carraige of Timber
LABOUR:
Carpenter 2nd class
Beldar
Sundries

Add water charges @ 1% on

Add C.P & OH @15% on

282.50
Cost for 6.60 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 49.22
Rs 49.20

Item Code: 2.21.3

Open timbering in case of shafts, wells, cesspits, manholes and the like including strutting and shoring complete. - Depth exceeding
3 m but not exceeding 4.5 m
Details of Cost for : 6.60 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
The material can be used for four times on the same work and
after use of material credit is given @ 75% of cost

1198

DSR-12

Poling board of
Second class kail wood in planks
250mm wide and 38mm thick
6x0.25x1.50mx0.038m = 0.086 cum or 86 cudm
Qty taken for cost of using once after deducting credit

cum

0.00538

25000.00

Page 32 of 2298

86x0.25x0.25=5.3755 cudm or 0.0053755 cum

1197

Second class kail wood in scantling

Walling 100mmx100m :
4x1.20mx0.10mx0.10m = 0.048cum or 48 cudm
Qty taken for cost of using once after deducting credit
=48 x 0.25 x 0.25 = 3 cudm or 0.003 cum

cum

0302

Safeda ballies 125 mm diameter

(4x1.0=4.0m) +(2x1.2=2.4) = 6.4m
Qty taken for cost of using once after deducting credit
6.4x0.25x0.25 = 0.40m
CARRIAGE :

metre

2204
0112
0114
9999

Poling board : 0.086 cum

Walling : 0.048 cum
Ballies struts - 3.14/4x(0.125)^2x6.4=0.079 cum
Total of carriage = 0.213 x 1 / 4 = 0.053 cum
Carraige of Timber
LABOUR:
Carpenter 2nd class
Beldar
Sundries

0.003

25000.00

0.40

37.00

cum

0.053

100.11

Day
Day
L.S.

0.10
0.20
3.64

273.00
247.00
1.49
Total:
311.73

Add water charges @ 1% on

Add C.P & OH @15% on

314.85
Cost for 6.60 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 54.86
Rs 54.85

Item Code: 2.22.1

Open timbering over areas including strutting, shoring etc. complete.. - Depth not exceeding 1.5 m
Details of Cost for : 45.00 Sqm
Code
Description
Unit
Quantity
MATERIALS:
The material can be used for four times on the same work and
after use of material credit is given @ 75% of cost

1198

0302

2204

DSR-12

Poling board of
Second class kail wood in planks
250mm wide and 38mm thick
40x1.50x0.25xx0.038 = 0.57 cum or 570 cudm
Qty taken for cost of using once after deducting credit
570x0.25x0.25=35.625 cudm or 0.035265 cum
Safeda ballies 125 mm diameter
40x1.50 = 60m
Qty taken for cost of using once after deducting credit
60x0.25x0.25 = 3.75m
CARRIAGE :
Poling board : 0.57 cum
Ballies struts - 40x 3.14/4x(0.125)^2=0.40 cum
Total of carriage = 1.31 x 1 / 4 = 0.3275 cum
Carraige of Timber

cum

metre

cum

Rate

0.03563

25000.00

3.75

37.00

0.3275

100.11

Page 33 of 2298

0112
0114
9999

LABOUR:
Carpenter 2nd class
Beldar
Sundries

Day
Day
L.S.

0.12
0.25
19.76

Add water charges @ 1% on

273.00
247.00
1.49
Total:
1186.24

Add C.P & OH @15% on

1198.10
Cost for 45.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 30.62
Rs 30.60

Item Code: 2.22.2

Open timbering over areas including strutting, shoring etc. complete.. - Depth exceeding 1.5 m but not exceeding 3 m

Code

Details of Cost for : 45.00 Sqm

Unit
Quantity

Description

Rate

MATERIALS:
The material can be used for four times on the same work and
after use of material credit is given @ 75% of cost

1198

0302

2204
0112
0114
9999

Poling board of
Second class kail wood in planks
250mm wide and 38mm thick
40x1.50x0.25xx0.038 = 0.57 cum or 570 cudm
Qty taken for cost of using once after deducting credit
570x0.25x0.25=35.625 cudm or 0.035265 cum
Safeda ballies 125 mm diameter
40x1.50 = 60m
Qty taken for cost of using once after deducting credit
60x0.25x0.25 = 3.75m
CARRIAGE :
Poling board : 0.57 cum
Ballies struts - 40x 3.14/4x(0.125)^2=0.40 cum
Total of carriage = 1.31 x 1 / 4 = 0.3275 cum
Carraige of Timber
LABOUR:
Carpenter 2nd class
Beldar
Sundries

cum

0.03563

25000.00

3.75

37.00

cum

0.3275

100.11

Day
Day
L.S.

0.25
0.50
33.15

273.00
247.00
1.49
Total:
1303.43

metre

Add water charges @ 1% on

Add C.P & OH @15% on

1316.46
Cost for 45.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 33.64
Rs 33.65

Item Code: 2.22.3

Open timbering over areas including strutting, shoring etc. complete.. -Depth exceeding 3 m but not exceeding 4.5 m

Code

DSR-12

Description

Details of Cost for : 45.00 Sqm

Unit
Quantity

Rate

Page 34 of 2298

MATERIALS:
The material can be used for four times on the same work and
after use of material credit is given @ 75% of cost

1198

0302

2204
0112
0114
9999

Poling board of
Second class kail wood in planks
250mm wide and 38mm thick
40x1.50x0.25xx0.038 = 0.57 cum or 570 cudm
Qty taken for cost of using once after deducting credit
570x0.25x0.25=35.625 cudm or 0.035265 cum
Safeda ballies 125 mm diameter
40x1.50 = 60m
Qty taken for cost of using once after deducting credit
60x0.25x0.25 = 3.75m
CARRIAGE :
Poling board : 0.57 cum
Ballies struts - 40x 3.14/4x(0.125)^2=0.40 cum
Total of carriage = 1.31 x 1 / 4 = 0.3275 cum
Carraige of Timber
LABOUR:
Carpenter 2nd class
Beldar
Sundries

cum

0.03563

25000.00

3.75

37.00

cum

0.3275

100.11

Day
Day
L.S.

0.50
0.88
47.58

273.00
247.00
1.49
Total:
1487.04

metre

Add water charges @ 1% on

Add C.P & OH @15% on

1501.91
Cost for 45.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 38.38
Rs 38.40

Item Code: 2.23

Extra for planking and strutting in open timbering if required to be left permanently in position.
Details of Cost for : 90.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
Poling board of
1198
Second class kail wood in planks
cum
0.9975
25000.00
1.50mx0.25mx0.038m
2x40x1.5x0.25x0.038 = 1.14cum = 1140 cudm
Less @ 1/8 of Qty as timber is supposed to be used once
before
1140 - 142.50 = 997.50 cudm or 0.9975 cum

1197

0302

DSR-12

Walling 100mmx100mm :
Second class kail wood in scantling
cum
4x30mx0.10mx0.10m =1.20cum or 1200 cudm
Less @ 1/8 of Qty as timber is supposed to be used once
before
=1200 - 150 = 1050 cudm or 1.05 cum

Struts of Safeda ballies 125 mm diameter

2x17x1.50m=51m

metre

1.05

25000.00

44.63

37.00

Page 35 of 2298

Less @ 1/8 of Qty as timber is supposed to be used once

before
=51 - 6.37 = 44.63m
CARRIAGE :

2204

Poling board : 1.14 cum

Walling : 1.20 cum
Ballies struts - 3.14/4x(0.125)^2 : 0.63 cum
Total of carriage = 2.97
Taking half = 2.97 / 2 = 1.485 cum
Carraige of Timber
LABOUR:

cum

1.485

100.11

Add water charges @ 1% on

Total:
52987.47

Add C.P & OH @15% on

53517.34
Cost for 90.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 683.83
Rs 683.85

Item Code: 2.25

Filling available excavated earth (excluding rock) .. ..
Code
0128
0115
0101

Details of Cost for : 10.00 Cum

Unit
Quantity

Description
LABOUR:
Mate
Coolie
Bhisthi

Day
Day
Day

0.20
2.50
0.20

Add water charges @ 1% on

Rate
260.00
247.00
260.00
Total:
721.50

Add C.P & OH @15% on

728.72
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 83.80
Rs 83.80

Item Code: 2.26.1

Extra for every additional lift of 1.5 m or part thereof in: All kinds of soil.
Code
0128
0114

Description
LABOUR:
Mate
Beldar

Details of Cost for : 10.00 Cum

Unit
Quantity
Day
Day

0.10
1.10

Add water charges @ 1% on

Rate
260.00
247.00
Total:
297.70

Add C.P & OH @15% on

300.68
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 34.58
Rs 34.60

Item Code: 2.26.2

Extra for every additional lift of 1.5 m or part thereof in: Ordinary / hard rock
Details of Cost for : 10.00 Cum

DSR-12

Page 36 of 2298

Code
0128
0114

Description
LABOUR:
Mate
Beldar

Unit

Quantity

Rate

Day
Day

0.20
1.95

260.00
247.00
Total:
533.65

Add water charges @ 1% on

Add C.P & OH @15% on

538.99
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 61.98
Rs 62.00

Item Code: 2.27

S/F in plinth with river sand under floors .. ..
Code
6501
2335
0114
0115
0101

Description
MATERIALS:
Jamuna sand
Carriage of Jamuna sand
LABOUR:
Beldar
Coolie
Bhishti

Details of Cost for : 10.00 Cum

Unit
Quantity

Rate

cum
cum

10.00
10.00

500.00
87.60

Day
Day
Day

0.89
1.07
0.35

247.00
247.00
260.00
Total:
6451.12

Add water charges @ 1% on

Add C.P & OH @15% on

6515.63
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 749.30
Rs 749.30

Item Code: 2.28.1

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish,
lead up to 50m and lift upto 1.5m All kinds of soil.

Code
0114
0115

Description
LABOUR:
Beldar
Coolie

Details of Cost for : 100.00 Sqm

Unit
Quantity
Day
Day

1.97
1.29

Add water charges @ 1% on

Rate
247.00
247.00
Total:
805.22

Add C.P & OH @15% on

813.27
Cost for 100.00 Sqm
Rate per 100 Sqm:
Rate as per DSR-12:

Rs 935.26
Rs 935.25

Item Code: 2.29.1

Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. - All kinds of soil
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
LABOUR:
0114
Beldar
Day
2.75

DSR-12

Rate
247.00

Page 37 of 2298

0101

Bhisti

Day

0.50

Add water charges @ 1% on

260.00
Total:
809.25

Add C.P & OH @15% on

817.34
Cost for 100.00 Sqm
Rate per 100 Sqm:
Rate as per DSR-12:

Rs 939.94
Rs 939.95

Item Code: 2.30.1

Excavating holes more than 0.10 cum & upto 0.5 cum then returning the soil as required in layers -All kinds of soil.

Code

02.008.01

Description
Details of cost for 10 holes
Earth work 10 x 0.30 (Avge) = 3.00cum
Rate as per Item 2.8.1
E/W excavation in foundation trenches .. .. All kinds of soil.

9999

Extra labour for ramming

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

Cum

3.00

130.78

L.S.

13.52

1.49
Total:
20.14

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

20.34
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 41.57
Rs 41.60

Item Code: 2.30.2

Excavating holes more than 0.10 cum & upto 0.5 cum then returning the soil as required in layers Ordinary Rock

Code

02.009.01
9999

Description
Details of cost for 10 holes
Earth work 10 x 0.30 (Avge) = 3.00cum
Rate as per Item 2.8.1
E/W excavation in foundation trenches .. .. Ordinary rok
Extra labour for ramming

Details of Cost for : 10.00 Nos

Unit
Quantity

Cum
L.S.

3.00
13.52

Add water charges @ 1% except on [A] i.e on

Rate

212.00
1.49
Total:
20.14

Add C.P & OH @15% except on [A] i.e on

20.34
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 65.94
Rs 65.85

Item Code: 2.30.3

Excavating holes more than 0.10 cum & upto 0.5 cum then returning the soil as required in layers - Hard rock (Requiring blasting)

Code

DSR-12

Description
Details of cost for 10 holes
Earth work 10 x 0.30 (Avge) = 3.00cum
Rate as per Item 2.8.1

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

Page 38 of 2298

02.009.02
9999

E/W excavation in foundation trenches .. .. Hard rock Cum

(requiring blasting)
Extra labour for ramming
L.S.

3.00

378.82

13.52

1.49
Total:
20.14

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

20.34
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 115.99
Rs 116.00

Item Code: 2.30.4

Excavating holes more than 0.10 cum & upto 0.5 cum then returning the soil as required in layers - Hard rock blasting prohibited

Code

02.009.03
9999

Details of Cost for : 10.00 Nos

Description
Unit
Quantity
Details of cost for 10 holes
Earth work 10 x 0.30 (Avge) = 3.00cum
Rate as per Item 2.8.1
E/W excavation in foundation trenches .. .. Hard rock (blasting Cum
3.00
prohibited)
Extra labour for ramming
L.S.
13.52
Add water charges @ 1% except on [A] i.e on

Rate

491.97
1.49
Total:
20.14

Add C.P & OH @15% except on [A] i.e on

20.34
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 149.93
Rs 149.90

Item Code: 2.31

Clearing jungle including uprooting of rank vegetation...girth upto 30cm measured ..removal of rubbish..
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
0114
Beldar
Day
1.08
0115
Coolie
Day
0.60
Add water charges @ 1% on

Rate
247.00
247.00
Total:
414.96

Add C.P & OH @15% on

419.11
Cost for 100.00 Sqm
Rate per 100 Sqm:
Rate as per DSR-12:

Rs 481.98
Rs 482.00

Item Code: 2.32

Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.

Code
0114
0115
9999

DSR-12

Description
LABOUR:
Beldar
Coolie
Sundries

Details of Cost for : 100.00 Sqm

Unit
Quantity
Day
Day
L.S.

0.60
0.25
1.82

Rate
247.00
247.00
1.49
Total:

Page 39 of 2298

Add water charges @ 1% on

212.66

Add C.P & OH @15% on

214.79
Cost for 100.00 Sqm
Rate per 100 Sqm:
Rate as per DSR-12:

Rs 247.01
Rs 247.00

Item Code: 2.33.1

Felling of trees of the girth (measured at a height of 1m above ground level) including cutting of trunks and branches removing the
roots and stacking of serviceable material and disposal of unserviceable material Beyond 30 cm girth up to and including .

Code

0114
0115
9999

Details of Cost for : 1.00 No.

Unit
Quantity

Description
Details of cost of tree of 15cm.
in. dia. Ht. = av. 3m
quantity of wood3.14/4x0.15x0.15x3 = 0.053 cum.
Add 20% for branches = 0.011 cum.
Total = 0.064 cum.
Labour for cutting in trees removing
the roots from the soil and then filling
in Pit and depresions.
Beldar
Coolie
Sundries

Day
Day
L.S.

0.33
0.17
2.73

Add water charges @ 1% on

Rate

247.00
247.00
1.49
Total:
127.57

Add C.P & OH @15% on

128.85
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 148.18
Rs 148.20

Item Code: 2.33.2

Felling of trees of the girth (measured at a height of 1m above ground level) including cutting of trunks and branches removing the
roots and stacking of serviceable material and disposal of unserviceable material Beyond 60 cm girth upto and including ..

Code

0114
0115
9999

Description
Details of cost of a tree- of av. girth = 90cm of av. dia. = 0.3m
and length = 5m
(22x0.3x0.3x5)/7x4 = 0.35 cum
20% branches = 0.07 cum
Total = 0.42 cum
Labour for cutting the trees and removing in roots from the
soil filling in pit and the depresions
Beldar
Coolie
Sundries

Details of Cost for : 1.00 No.

Unit
Quantity

Day
Day
L.S.

1.50
0.75
5.46

Add water charges @ 1% on

Rate

247.00
247.00
1.49
Total:
563.89

Add C.P & OH @15% on

569.53
Cost for 1.00 No.

DSR-12

Page 40 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 654.96
Rs 654.95

Item Code: 2.33.3

Felling of trees of the girth (measured at a height of 1m above ground level) including cutting of trunks and branches removing the
roots and stacking of serviceable material and disposal of unserviceable material Beyond 120 cm girth upto and including 2

Code

0114
0115
9999

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for a tree- avg. girth = 180cm and avg. length =
7m
(22x0.6x0.6x7)/7x4 = 1.98 cum.+ 20% branches = 0.40 cum.
Total = 2.38 cum.
Labour for cutting the trees and removing in roots from the
soil filling in pit and the depresions
Beldar
Day
Coolie
Day
Sundries
L.S.

7.00
3.50
8.06

Add water charges @ 1% on

Rate

247.00
247.00
1.49
Total:
2605.51

Add C.P & OH @15% on

2631.57
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 3026.31
Rs 3026.30

Item Code: 2.33.4

Felling trees of the girth - Above 240 cm girth
Code

0114
0115
9999

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for a tree of average girth 300cm, average dia
1.00m and length 10m
LABOUR :
Quantity of wood (22 x 1 x 1 x 10)/7 x 4 = 7.86 cum
20% branches = 1.57 cum
Total = 9.43 cum
Labour for cutting for cutting the tree and removing in roots
from the soil filling in pit and the depressions
Beldar
Coolie
Sundries

Day
Day
L.S.

14.00
7.00
26.91

Add water charges @ 1% on

Rate

247.00
247.00
1.49
Total:
5227.10

Add C.P & OH @15% on

5279.37
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 6071.28
Rs 6071.30

Item Code: 2.34.1

DSR-12

Page 41 of 2298

Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate
of 20%
Details of Cost for : 100.00 Ltr
Code
Description
Unit
Quantity
Rate
7022
Chlorpyriphos 20% E.C. / Lindane 20% E.C.
litre
100.00
160.00
2342
Carraige of Solvent (Chlorpyriphos)
quint
1.00
8.76
Total:
Add water charges @ 1% on
16008.76
Add C.P & OH @15% on
16168.85
Cost for 100.00 Ltr
Rate per One Litre:
Rate as per DSR-12:

Rs 185.94
Rs 185.95

Item Code: 2.35.1.1

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment - Along external wall - With
Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
Chlorpyriphos 1% EC
=10.0x0.30x7.5 =22.50 litres
Chlorpyriphos 20% EC required = 22.50 / 20 = 1.125 ltres (To
be supplied at free of cost)
0114
Beldar
Day
0.33
247.00
(For excavating channel ) rodding in chemical spraying the
emulsion and refilling the same
9999
Sundries and rent for sprayer etc.,
L.S.
13.52
1.49
Total:
Add water charges @ 1% on
101.65
Add C.P & OH @15% on
102.67
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 11.81
Rs 11.80

Item Code: 2.35.2.1

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment - Along the external wall below
concrete or masonry - With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Code

0114
9999

Description

Details of Cost for : 10.00 m

Unit
Quantity

Chlorpyriphos 1% EC
=10.0x2.25 =22.50 litres
Chlorpyriphos 20% EC required = 22.50 / 20 = 1.125 ltres (To
be supplied at free of cost)
Beldar
Day
(for drilling holes and injecting chemical)
Sundries and rent for sprayer, cost of mortart and making L.S.
good the holes etc.,

Rate

0.40

247.00

35.88

1.49

Add water charges @ 1% on

Total:
152.26

Add C.P & OH @15% on

153.78
Cost for 10.00 m
Rate per One Metre:

DSR-12

Rs 17.69

Page 42 of 2298

Rate as per DSR-12:

Rs 17.70

Item Code: 2.35.3.1

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment - Treatment of soil under existing
floors - With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Code

0114
0124
9999

Details of Cost for : 9.00 Sqm

Description
Unit
Quantity
Details of cost for 9sqm (3.00m x 3.00 m) , No. of holes - 100
nos.

Chlorpyriphos 1% EC
=100x1 =100 litres
Chlorpyriphos 20% EC required = 100 / 20 = 5 ltres (To be
supplied at free of cost)
LABOUR:
Beldar
Day
(For MAKING HOLES and spraying)
Mason (brick layer) 2nd class
Day
Sundries and rent for sprayer and cost of mortar etc.,
L.S.

Rate

2.00

247.00

0.50
35.88

273.00
1.49
Total:
683.96

Add water charges @ 1% on

Add C.P & OH @15% on

690.80
Cost for 9.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 88.27
Rs 88.25

Item Code: 2.35.4.1

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment - Treatment of existing masonry - With
Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Code

0114

0124
9999

Details of Cost for : 10.00 m

Description
Unit
Quantity
No. of holes 10/0.3 +1 = 34.33 say 34 holes
Chlorpyriphos 1% EC
=34x1 = 34 litres
Chlorpyriphos 20% EC required = 34 / 20 = 1.70 ltres (To be
supplied at free of cost)
LABOUR:
Beldar
Day
0.30
(For MAKING HOLES at 45 degrees and spraying the emulsion)
Mason (brick layer) 2nd class
Sundries and rent of pump etc.,

Day
L.S.

0.05
17.94

Add water charges @ 1% on

Rate

247.00

273.00
1.49
Total:
114.48

Add C.P & OH @15% on

115.62
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 13.30
Rs 13.30

Item Code: 2.35.5

DSR-12

Page 43 of 2298

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment - Treatment at points of contact of
wood work by chemical_x000D_
emulsion Chlorpyriphos/ Lindane (in oil or kerosene based_x000D_
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
No. of holes 10/0.15 +1 = 67.67 say 68 holes
Chlordane 1% EC required
=68x0.5 = 34 litres
Chlorpyriphos 20% EC required = 34 / 20 = 1.70 ltres (To be
supplied at free of cost)
KEROSENE OIL REQUIRED = 34 - 1.7 = 32.30 LITRES
0771
Kerosene oil
litre
32.30
30.00
0112
Carpenter 2nd class
Day
0.20
273.00
(For making holes and plugging the same)
0114
Beldar
Day
0.20
247.00
(For injecting the chemical)
9999
Sundries and rent of pump etc.,
L.S.
17.94
1.49
Total:
Add water charges @ 1% on
1099.73
Add C.P & OH @15% on
1110.73
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 127.73
Rs 127.75

Item Code: 2.36

Deduct not levelled and nealty dressed.
Code
0128
0115

Details of Cost for : 10.00 Cum

Unit
Quantity

Description
LABOURMate
Beldar/Coolie

Day
Day

-0.08
-0.80

Add water charges @ 1% on

Rate
260.00
247.00
Total:
-218.40

Add C.P & OH @15% on

-220.58
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

-Rs 25.37
-Rs 25.35

Item Code: 2.37

Supply and stacking of Fly ash conforming to IRC- 58 at site, including carriage, loading , unloading & stacking up to any lead

Code

Description
Ref : Based on DAR item No. : 1.1.1 A ii) Labour and carriage

1980
2262

Fly ash
Carraige of Fly ash

Details of Cost for : 1.00 Cum

Unit
Quantity

cum
cum

1.00
1.00

Add water charges @ 1% on

Rate

7.75
87.60
Total:
95.35

Add C.P & OH @15% on

96.30
Cost for 1.00 Cum
Rate per One Cum:

DSR-12

Rs 110.75

Page 44 of 2298

Rate as per DSR-12:

Rs 110.75

Item Code: 2.38

Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm),

Code

0128
0115
0101

Description
Ref : Based on DAR Item No. 2.25
LABOUR :
Mate
Coolie
Bhisti

Details of Cost for : 10.00 Cum

Unit
Quantity

Day
Day
Day

0.20
2.50
0.20

Add water charges @ 1% on

Rate

260.00
247.00
260.00
Total:
721.50

Add C.P & OH @15% on

728.72
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 83.80
Rs 83.80

Item Code: 4.1.1

P/L CC excluding centering - All work up to plinth level: _x000D_
Code
0295
0297
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999

Description
MATERIALS:
Stone aggregate 20mm
Stone aggregate 10mm
Carriage of 20mm aggregate
Coarse sand
Carriage of coarse sand
Cement
(Qty of cement : 0.425 cum)
Carriage of cement
LABOUR:
Mason (avge)
Beldar
Bhisthi
Hire running charges of concrete mixer
Vibrator (Hire charges)
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity

Rate

cum
cum
cum
cum
cum
tonne

0.64
0.21
0.85
0.425
0.425
0.61

1050.00
1050.00
87.60
1120.00
87.60
5000.00

tonne

0.61

77.87

0.10
1.63
0.70
0.07
0.07
14.30

287.00
247.00
260.00
800.00
300.00
1.49
Total:
5289.31

Day
Day
Day
Day
Day
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

5342.20
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 6143.53
Rs 6143.55

Item Code: 4.1.2

P/L CC excluding centering - All work up to plinth level: 1:1:3 - Coarse sand, 20mmstone aggregate.. ..
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS :
0295
Stone aggregate 20mm
cum
0.57
0297
Stone aggregate 10mm
cum
0.28

DSR-12

Rate
1050.00
1050.00

Page 45 of 2298

2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999

Carriage of aggregate
Coarse sand
Carriage of coarse sand
Cement (0.2833 cum)
Carriage of cement
LABOUR:
Mason
Beldar
Bhishti
Mixer
Vibrator
Sundries

cum
cum
cum
tonne
tonne

0.85
0.425
0.425
0.40
0.40

87.60
1120.00
87.60
5000.00
77.87

Day
Day
Day
Day
Day
L.S.

0.10
1.63
0.70
0.07
0.07
14.30

287.00
247.00
260.00
800.00
300.00
1.49
Total:
4222.96

Add water charges @ 1% on

Add C.P & OH @15% on

4265.19
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4904.97
Rs 4904.95

Item Code: 4.1.3

P/L CC excluding centering - All work up to plinth level: 1:2:4 - Coarse sand, 20mmstone aggregate.. ..
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS:
0295
Stone aggregate 20mm
cum
0.67
0297
Stone aggregate 10 mm
cum
0.22
2202
Carriage of aggregate
cum
0.89
0982
Coarse sand
cum
0.445
2203
Carriage of coarse sand
cum
0.445
0367
Cement (0.2833 cum)
tonne
0.32
2209
Carriage of cement
tonne
0.32
LABOUR:
0155
Mason
Day
0.10
0114
Beldar
Day
1.63
0101
Bhishti
Day
0.70
0002
Mixer
Day
0.07
0012
Vibrator
Day
0.07
9999
Sundries
L.S.
14.30
Add water charges @ 1% on

Rate
1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87
287.00
247.00
260.00
800.00
300.00
1.49
Total:
3886.38

Add C.P & OH @15% on

3925.24
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4514.03
Rs 4514.05

Item Code: 4.1.4

P/L CC excluding centering - All work up to plinth level: 1:2:4 - Coarse sand, 40mmstone aggregate.. ..
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS :
0293
Stone aggregate 40mm (one size) (0.56-7.5% for voids) i.e. cum
0.52
0.04 = 0.52 cum)
0295
Stone aggregate 20mm (one size)
cum
0.22
0297
Stone aggregate 10mm (one size)
cum
0.11

DSR-12

Rate
950.00
1050.00
1050.00

Page 46 of 2298

2206
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999

Carriage of aggregate 40mm

Carriage of aggregate below 40mm size cum
Coarse sand
Carriage of coarse sand
Cement (0.2225 cum)
Carriage of cement
LABOUR:
Mason
Beldar
Bhishti
Mixer
Vibrator
Sundries

cum
cum
cum
cum
tonne
tonne

0.52
0.33
0.445
0.445
0.32
0.32

95.22
87.60
1120.00
87.60
5000.00
77.87

Day
Day
Day
Day
Day
L.S.

0.10
1.63
0.70
0.07
0.07
13.52

287.00
247.00
260.00
800.00
300.00
1.49
Total:
3791.67

Add water charges @ 1% on

Add C.P & OH @15% on

3829.59
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4404.03
Rs 4404.05

Item Code: 4.1.5

P/L CC excluding centering - All work up to plinth level: 1:3:6 - Coarse sand, 20mmstone aggregate.. ..
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS :
0295
Stone aggregate 20mm
cum
0.70
0297
Stone aggregate 10 mm
cum
0.24
2202
Carriage of aggregate
cum
0.94
0982
Coarse sand
cum
0.47
2203
Carriage of coarse sand
cum
0.47
0367
Cement (0.15674 cum)
tonne
0.22
2209
Carriage of cement
tonne
0.22
LABOUR:
0155
Mason
Day
0.10
0114
Beldar
Day
1.63
0101
Bhishti
Day
0.70
0002
Mixer
Day
0.07
0012
Vibrator
Day
0.07
9999
Sundries
L.S.
13.52
Add water charges @ 1% on

Rate
1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87
287.00
247.00
260.00
800.00
300.00
1.49
Total:
3464.49

Add C.P & OH @15% on

3499.13
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4024.00
Rs 4024.00

Item Code: 4.1.6

P/L CC excluding centering - All work up to plinth level: 1:3:6 - Coarse sand, 40mmstone aggregate.. ..
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS :
0293
Stone aggregate 40mm (one size) (0.70
cum
0.65
cum-7.5% for voids i.e. 0.05 = 0.65 cum
0295
Stone aggregate 20mm
cum
0.24

DSR-12

Rate
950.00
1050.00

Page 47 of 2298

2206
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999

Carriage of aggregate 40mm

Carriage of aggregate 20mm
Coarse sand
Carriage of coarse sand
Cement (0.15674 cum)
Carriage of cement
LABOUR:
Mason
Beldar
Bhishti
Mixer
Vibrator
Sundries

cum
cum
cum
cum
tonne
tonne
Day
Day
Day
Day
Day
L.S.

0.65
0.24
0.47
0.47
0.22
0.22

95.22
87.60
1120.00
87.60
5000.00
77.87

0.10
1.63
0.70
0.07
0.07
13.52

287.00
247.00
260.00
800.00
300.00
1.49
Total:
3347.56

Add water charges @ 1% on

Add C.P & OH @15% on

3381.04
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3888.20
Rs 3888.20

Item Code: 4.1.7

P/L CC excluding centering - All work up to plinth level: 1:3:6 - Fine sand, 40mmstone aggregate.. ..
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS :
0293
Stone aggregate 40mm (one size) (0.70 cum-7.5% for voids cum
0.65
i.e. 0.05 = 0.65 cum
0295
Stone aggregate 20 mm (one size)
cum
0.24
2206
Carriage of aggregate 40mm
cum
0.65
2202
Carriage of aggregate 20mm
cum
0.24
0983
Fine sand
cum
0.47
2261
Carriage of fine sand
cum
0.47
0367
Cement (0.15674 cum)
tonne
0.22
2209
Carriage of cement
tonne
0.22
LABOUR:
0155
Mason
Day
0.10
0114
Beldar
Day
1.63
0101
Bhishti
Day
0.70
0002
Mixer
Day
0.07
0012
Vibrator
Day
0.07
9999
Sundries
L.S.
13.52
Add water charges @ 1% on

Rate
950.00
1050.00
95.22
87.60
640.00
87.60
5000.00
77.87
287.00
247.00
260.00
800.00
300.00
1.49
Total:
3121.96

Add C.P & OH @15% on

3153.18
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3626.16
Rs 3626.15

Item Code: 4.1.8

P/L CC excluding centering - All work up to plinth level: 1:4:8 - Coarse sand, 40mmstone aggregate.. ..
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS :

DSR-12

Rate

Page 48 of 2298

0293
0295
2206
2202
0982
2261
0367
2209
0155
0114
0101
0002
0012
9999

Stone aggregate 40mm (one size) (0.70 cum-7.5% for voids cum
i.e. 0.05 = 0.65 cum
Stone aggregate 20 mm
cum
Carriage of aggregate 40mm
cum
Carriage of aggregate 20mm
cum
Corase sand
cum
Carriage of coarse sand
cum
Cement (0.1175 cum)
tonne
Carriage of cement
tonne
LABOUR:
Mason
Day
Beldar
Day
Bhishti
Day
Mixer
Day
Vibrator
Day
Sundries
L.S.

0.65

950.00

0.24
0.65
0.24
0.47
0.47
0.17
0.17

1050.00
95.22
87.60
1120.00
87.60
5000.00
77.87

0.10
1.63
0.70
0.07
0.07
13.52

287.00
247.00
260.00
800.00
300.00
1.49
Total:
3093.67

Add water charges @ 1% on

Add C.P & OH @15% on

3124.61
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3593.30
Rs 3593.30

Item Code: 4.1.9

P/L in position CC all work upto plinth 1:4:8, 40 mm stone agg with fine sand
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS :
0293
Stone aggregate 40mm (one size) (0.70 cum-7.5% for voids cum
0.65
i.e. 0.05 = 0.65 cum
0295
Stone aggregate 20 mm (One size)
cum
0.24
2206
Carriage of aggregate 40mm
cum
0.65
2202
Carriage of aggregate 20mm
cum
0.24
0983
Fine sand
cum
0.47
2261
Carriage of fine sand
cum
0.47
0367
Cement (0.1175 cum)
tonne
0.17
2209
Carriage of cement
tonne
0.17
LABOUR:
0155
Mason
Day
0.10
0114
Beldar
Day
1.63
0101
Bhishti
Day
0.70
0002
Mixer
Day
0.07
0012
Vibrator
Day
0.07
9999
Sundries
L.S.
13.52
Add water charges @ 1% on

Rate
950.00
1050.00
95.22
87.60
640.00
87.60
5000.00
77.87
287.00
247.00
260.00
800.00
300.00
1.49
Total:
2868.07

Add C.P & OH @15% on

2896.75
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3331.26
Rs 3331.25

Item Code: 4.1.10

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Coarse sand, 40mmstone aggregate.. ..
Details of Cost for : 1.00 Cum

DSR-12

Page 49 of 2298

Code
0293
0295
2206
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999

Description
Unit
MATERIALS :
Stone aggregate 40mm (one size) (0.70 cum-7.5% for voids cum
i.e. 0.05 = 0.65 cum
Stone aggregate 20 mm (One size)
cum
Carriage of aggregate 40mm
cum
Carriage of aggregate 20mm
cum
Coarse sand
cum
Carraige of Coarse sand
cum
Cement (0.2225 cum)
tonne
Carriage of cement
tonne
LABOUR:
Mason
Day
Beldar
Day
Bhishti
Day
Mixer
Day
Vibrator
Day
Sundries
L.S.

Quantity

Rate

0.65

950.00

0.24
0.65
0.24
0.47
0.47
0.13
0.13

1050.00
95.22
87.60
1120.00
87.60
5000.00
77.87

0.10
1.63
0.70
0.07
0.07
13.52

287.00
247.00
260.00
800.00
300.00
1.49
Total:
2890.55

Add water charges @ 1% on

Add C.P & OH @15% on

2919.46
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3357.38
Rs 3357.40

Item Code: 4.1.11

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Fine sand, 40mmstone aggregate.. ..
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS :
0293
Stone aggregate 40mm (one size) (0.70
cum
0.65
cum-7.5% for voids i.e. 0.05 = 0.65 cum
0295
Stone aggregate 20 mm (One size)
cum
0.24
2206
Carriage of aggregate 40mm
cum
0.65
2202
Carriage of aggregate 20mm
cum
0.24
0983
Fine sand
cum
0.47
2261
Carriage of fine sand
cum
0.47
0367
Cement (0.2225 cum)
tonne
0.13
2209
Carriage of cement
tonne
0.13
LABOUR:
0155
Mason
Day
0.10
0114
Beldar
Day
1.63
0101
Bhishti
Day
0.70
0002
Mixer
Day
0.07
0012
Vibrator
Day
0.07
9999
Sundries
L.S.
8.97
Add water charges @ 1% on

Rate
950.00
1050.00
95.22
87.60
640.00
87.60
5000.00
77.87
287.00
247.00
260.00
800.00
300.00
1.49
Total:
2658.18

Add C.P & OH @15% on

2684.76
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3087.47
Rs 3087.45

Item Code: 4.1.12

DSR-12

Page 50 of 2298

P/L in position CC all work upto plinth 1:2:3.5:9, fly ash, cs, 40 mm stone aggregate
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS:
0293
Stone aggregate 40mm (one size) (0.70 cum-7.5% for voids cum
0.65
i.e. 0.05-0.65 cum)
0295
Stone aggregate 20 mm (one size)
cum
0.24
2206
Carriage of aggregate 40 mm
cum
0.65
2202
Carriage of agregate 20 mm
cum
0.24
0982
Coarse sand
cum
0.37
2203
Carriage of coarse sand
cum
0.37
1980
Fly ash
cum
0.21
2262
Carriage of fly ash
cum
0.21
0367
Cement
tonne
0.17
2209
Carriage of cement
tonne
0.17
LABOUR:
0155
Mason
Day
0.10
0114
Beldar
Day
1.63
0101
Bhishti
Day
0.70
0002
Mixer
Day
0.07
0012
Vibrator
Day
0.07
9999
Sundries
L.S.
14.30
Add water charges @ 1% on

Rate
950.00
1050.00
95.22
87.60
1120.00
87.60
7.75
87.60
5000.00
77.87
287.00
247.00
260.00
800.00
300.00
1.49
Total:
2994.11

Add C.P & OH @15% on

3024.05
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3477.66
Rs 3477.65

Item Code: 4.1.13

P/L in position CC all work upto plinth 1:2.5:4:11, fly ash, cs, 40 mm stone aggregate
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS :
0293
Stone aggregate 40mm (one size) (0.70 cum-7.5% for voids cum
0.65
i.e. 0.05 - 0.65 cum)
0295
Stone aggregate 20 mm (one size)
cum
0.24
2206
Carriage of aggregate 40mm
cum
0.65
2202
Carriage of aggregate 20mm
cum
0.24
0982
Coarse sand
cum
0.34
2203
Carriage of coarse sand
cum
0.34
1980
Fly ash
cum
0.21
2262
Carriage of fly ash
cum
0.21
0367
Cement
tonne
0.13
2209
Carriage of cement
tonne
0.13
LABOUR:
0155
Mason
Day
0.10
0114
Beldar
Day
1.63
0101
Bhishti
Day
0.70
0002
Mixer
Day
0.07
0012
Vibrator
Day
0.07
9999
Sundries
L.S.
14.30
Add water charges @ 1% on

Rate
950.00
1050.00
95.22
87.60
1120.00
87.60
7.75
87.60
5000.00
77.87
287.00
247.00
260.00
800.00
300.00
1.49
Total:
2754.76

Add C.P & OH @15% on

2782.31
Cost for 1.00 Cum

DSR-12

Page 51 of 2298

Rate per One Cum:

Rate as per DSR-12:

Rs 3199.66
Rs 3199.65

Item Code: 4.2.1

P/L CC walls, columns, string courses, coping, bed blocks, window sills etc. up to floor five level excluding centering, shuttering
finishing : 1:1:2 (Coarse sand - stone aggregate 20mm)

Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Stone aggregate 20mm
Stone aggregate 10 mm
Carriage of aggregate 20mm and 10 mm
Coarse sand
Carriage of coarse sand
Cement (0.425 cum)
Carriage of cement
Labour:
Beldar
Coolie
Bhishti
Mason 1st class
Mason Ilnd class
Mixer
Vibrator
Scaffolding
Sundries
(Extra labour for lifting of materials up to floor five level)

cum
cum
cum
cum
cum
tonne
tonne

Rate

0.64
0.21
0.85
0.425
0.425
0.61
0.61

1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87

0.90
0.78
0.70
0.06
0.06
0.07
0.07
114.40
14.30
1.88

247.00
247.00
260.00
301.00
273.00
800.00
300.00
1.49
1.49
247.00

Add water charges @ 1% on

Total:
5942.22

Day
Day
Day
Day
Day
Day
Day
L.S.
L.S.
Day

Add C.P & OH @15% on

6001.64
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 6901.89
Rs 6901.90

Item Code: 4.2.2

P/L CC walls, coping, bed blocks, window sills etc. up to floor five level excluding centering, shuttering finishing : 1:1:3 (Coarse
sand - stone aggregate 20mm)
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
0295
20mm stone aggregate
cum
0.57
1050.00
0297
Stone aggregate 10mm
cum
0.28
1050.00
2202
Carriage of aggregate
cum
0.85
87.60
0982
Coarse sand
cum
0.425
1120.00
2203
Carriage of coarse sand
cum
0.425
87.60
0367
Cement (0.2833 cum)
tonne
0.40
5000.00
2209
Carriage of cement
tonne
0.40
77.87
LABOUR:
0114
Beldar
Day
0.90
247.00
0115
Coolie
Day
0.78
247.00
0101
Bhishti
Day
0.70
260.00
0123
Mason 1st class
Day
0.06
301.00
0124
Mason Ilnd class
Day
0.06
273.00

DSR-12

Page 52 of 2298

0002
0012
9999
9999
0115

Mixer
Vibrator
Scaffolding
Sundries
(Extra labour for lifting.material upto floor

Day
Day
L.S.
L.S.
Day

0.07
0.07
114.40
14.30
1.88

Add water charges @ 1% on

800.00
300.00
1.49
1.49
247.00
Total:
4875.87

Add C.P & OH @15% on

4924.63
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5663.32
Rs 5663.30

Item Code: 4.2.3

P/L CC walls string courses, coping, bed blocks, window sills ,etc. up to floor five level : 1:2:4 (Coarse sand - stone aggregate 20mm)

Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Stone aggregate 20 mm
Stone aggregate 10 mm
Carriage of aggregate
Coarse sand
Carriage of coarse sand
Cement (0.2833 cum)
Carriage of cement
LABOUR:
Beldar
Coolie
Bhishti
Mason 1st class
Mason Ilnd class
Mixer
Vibrator
Scaffolding
Sundries
Coolie
Extra labour for lifting material upto floor V level = 0.75 x 2.50
= 1.88

cum
cum
cum
cum
cum
tonne
tonne

Rate

0.67
0.22
0.89
0.445
0.445
0.32
0.32

1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87

Day
Day
Day
Day
Day
Day
Day
L.S.
L.S.

0.90
0.78
0.70
0.06
0.06
0.07
0.07
114.40
14.30

247.00
247.00
260.00
301.00
273.00
800.00
300.00
1.49
1.49

Day

1.88

247.00

Add water charges @ 1% on

Total:
4539.29

Add C.P & OH @15% on

4584.68
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5272.38
Rs 5272.40

Item Code: 4.2.4

P/L CC walls, columns, string courses, coping, bed blocks, window sills etc. up to floor five level excluding centering, shuttering
finishing : 1:2:4 (Coarse sand - stone aggregate 40mm)

Code
0293

DSR-12

Description

Details of Cost for : 1.00 Cum

Unit
Quantity

MATERIALS:
Stone aggregate 40 mm (one size) (0.56-7.5% for voids i.e. cum
0.04 = 0.52 cum)

0.52

Rate
950.00

Page 53 of 2298

0295
0297
2206
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115

Stone aggregate 20 mm (one zize)

Stone aggregate 10 mm (one size)
Carriage of aggregate 40 mm
Carriage of aggregate 20 mm and 10 mm
Coarse sand
Carriage of coarse sand
Cement (0.2225 cum)
Carriage of cement
LABOUR:
Beldar
Coolie
Bhishti
Mason 1st class
Mason Ilnd class
Mixer
Vibrator
Scaffolding
Sundries
Coolie
(Extra labour for lifting.material upto floor V level = 0.75 x 2.5)

cum
cum
cum
cum
cum
cum
tonne
tonne

0.22
0.11
0.52
0.33
0.445
0.445
0.32
0.32

1050.00
1050.00
95.22
87.60
1120.00
87.60
5000.00
77.87

Day
Day
Day
Day
Day
Day
Day
L.S.
L.S.

0.90
0.78
0.70
0.06
0.06
0.07
0.07
114.40
13.52

247.00
247.00
260.00
301.00
273.00
800.00
300.00
1.49
1.49

Day

1.88

247.00

Add water charges @ 1% on

Total:
4444.58

Add C.P & OH @15% on

4489.03
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5162.38
Rs 5162.40

Item Code: 4.2.5

P/L CC walls, columns, string courses, coping, bed blocks, window sills etc. up to floor five level excluding centering, shuttering
finishing : 1:3:6 (Coarse sand - stone aggregate 20mm)

Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115

DSR-12

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Stone aggregate 20 mm
Stone aggregate
Carriage of aggregate
Coarse sand
Carrage of Coarse sand
Cement
Carriage of cement
LABOUR:
Beldar
Coolie
Bhishti
Mason 1st class
Mason Ilnd class
Mixer
Vibrator
Scaffolding
Sundries
Coolie
(Extra labour for lifting.material upto floor V level = 0.75 x 2.5)

cum
cum
cum
cum
cum
tonne
tonne

Rate

0.70
0.24
0.94
0.47
0.47
0.22
0.22

1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87

Day
Day
Day
Day
Day
Day
Day
L.S.
L.S.

0.90
0.78
0.70
0.06
0.06
0.07
0.07
114.40
13.52

247.00
247.00
260.00
301.00
273.00
800.00
300.00
1.49
1.49

Day

1.88

247.00

Add water charges @ 1% on

Total:
4117.40

Page 54 of 2298

Add C.P & OH @15% on

4158.57
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4782.36
Rs 4782.35

Item Code: 4.2.6

P/L CC in retaining walls, columns, string, bad, coping upto floor 5 level 1 : 3 : 6 - 40 mm stone agg. with coarse sand.

Code
0293
0295
2206
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Stone aggregate 40 mm (one size) (0.70 cum 7.5% for voids
i.e. 0.05 = 0.65 cum)
Stone aggregate 20 mm (One size)
Carriage of aggregate 40 mm
Carriage of aggregate 20 mm
Coarse sand
Carriage of coarse sand
Cement (0.15674 cum)
Carriage of cement
LABOUR:
Beldar
Coolie
Bhishti
Mason 1st class
Mason Ilnd class
Mixer
Vibrator
Scaffolding
Sundries
Coolie
(Extra labour for lifting.material upto floor V level = 0.75 x 2.5)

Rate

cum

0.65

950.00

cum
cum
cum
cum
cum
tonne
tonne

0.24
0.65
0.24
0.47
0.47
0.22
0.22

1050.00
95.22
87.60
1120.00
87.60
5000.00
77.87

Day
Day
Day
Day
Day
Day
Day
L.S.
L.S.

0.90
0.78
0.70
0.06
0.06
0.07
0.07
114.40
13.52

247.00
247.00
260.00
301.00
273.00
800.00
300.00
1.49
1.49

Day

1.88

247.00

Add water charges @ 1% on

Total:
4000.47

Add C.P & OH @15% on

4040.47
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4646.54
Rs 4646.55

Item Code: 4.2.7

P/L CC in retaining walls, columns, string, bad, coping upto floor 5 level 1 : 3 : 6 - 40 mm stone agg. with fine sand.

Code
0293
0295
2206
2202
0983
2261
0367

DSR-12

Description
MATERIALS:
Stone aggregate 40 mm(one size) (0.70 cum 7.5% for voids i.e.
0.05 = 0.65 cum)
Stone aggregate 20 mm
Carriage of aggregate 40 mm
Carriage of aggregate 20 mm
Fine sand
Carriage of fine sand
Cement (0.15674 cum)

Details of Cost for : 1.00 Cum

Unit
Quantity

Rate

cum

0.65

950.00

cum
cum
cum
cum
cum
tonne

0.24
0.65
0.24
0.47
0.47
0.22

1050.00
95.22
87.60
640.00
87.60
5000.00

Page 55 of 2298

2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115

Carriage of cement
LABOUR:
Beldar
Coolie
Bhishti
Mason 1st class
Mason Ilnd class
Mixer
Vibrator
Scaffolding
Sundries
Coolie
(Extra labour for lifting.material upto floor V level = 0.75 x 2.5)

tonne

0.22

77.87

Day
Day
Day
Day
Day
Day
Day
L.S.
L.S.

0.90
0.78
0.70
0.06
0.06
0.07
0.07
114.40
13.52

247.00
247.00
260.00
301.00
273.00
800.00
300.00
1.49
1.49

Day

1.88

247.00

Add water charges @ 1% on

Total:
3774.87

Add C.P & OH @15% on

3812.62
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4384.51
Rs 4384.50

Item Code: 4.2.8

P/L CC in retaining walls, columns, string, bad, coping upto floor 5 level 1 : 5 : 10 - 40 mm stone agg. with fine sand.

Code
0293
0295
2206
2202
0982
2261
0367
2209
0114
0115
0101
0123
0002
0012
9999
9999
0115

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Stone aggregate 40 mm(one size) (0.70 cum 7.5% for voids i.e.
0.05 = 0.65 cum)
Stone aggregate 20 mm
Carriage of aggregate 40 mm
Carriage of aggregate 20 mm
Coarse sand (zone III)
Carriage of fine sand
Cement (0.15674 cum)
Carriage of cement
LABOUR:
Beldar
Coolie
Bhishti
Mason 1st class
Hire charges of Concrete Mixer 0.14 cubic metre
Vibrator (Needle type 40mm)
Scaffolding
Sundries
Coolie
(Extra labour for lifting.material upto floor V level = 0.75 x 2.5)

Rate

cum

0.65

950.00

cum
cum
cum
cum
cum
tonne
tonne

0.24
0.65
0.24
0.47
0.47
0.13
0.13

1050.00
95.22
87.60
1120.00
87.60
5000.00
77.87

Day
Day
Day
Day
Day
Day
L.S.
L.S.

0.90
0.78
0.70
0.10
0.07
0.07
114.40
14.30

247.00
247.00
260.00
301.00
800.00
300.00
1.49
1.49

Day

1.88

247.00

Add water charges @ 1% on

Total:
3540.29

Add C.P & OH @15% on

3575.69
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

DSR-12

Rs 4112.04
Rs 4112.05

Page 56 of 2298

Item Code: 4.3.1

C/S i/c strutting for Foundation, footing etc
Code

7319
7326
7327
7328
7329
7330
9999
9999
0116
0114
9999
9999

Details of Cost for : 10.80 Sqm

Description
Unit
Quantity
Details of cost for footing size
2.7mx2.7mxl.00m
Contact area = 10.8 sqm.
MATERIAL:
Assuming shuttering material will become unserviceable after
use of 40 times
Adding for maintenance @ 10% of cost
Taking salvage value after full use of material @ 25% of cost
Wall form panel 1250x500mm
Qty taken for cost of using once = 16x0.85/40 = 0.34
Corner angle (1.5m long)
Qty taken for cost of using once = 4x0.85/40 = 0.085
100mm channel shoulders 2.5m long
Qty taken for cost of using once = 8x0.85/40= 0.17
Double clip (bridge clip)
Qty taken for cost of using once = 16x0.85/40 = 0.34
Single clip
Qty taken for cost of using once = 8x0.85/40 = 0.17
MS tube 40mm - 4x2.7m = 10.8m
Qty taken for cost of using once = 10.8x0.85/40 = 0.2295
Assembly nuts & bolts
Carriage
LABOUR:
Fitter Grade-I
Beldar
Shuttering oil
Sundries

Rate

each

0.34

1050.00

each

0.085

300.00

each

0.17

1160.00

each

0.34

97.00

each

0.17

77.00

0.2295

280.00

L.S.
L.S.

22.10
78.00

1.49
1.49

Day
Day
L.S.
L.S.

0.75
1.50
52.00
26.00

301.00
247.00
1.49
1.49
Total:
1551.65

metre

Add water charges @ 1% on

Add C.P & OH @15% on

1567.17
Cost for 10.80 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 166.88
Rs 166.90

Item Code: 4.3.2

Code

7319
7327
7328

DSR-12

Details of Cost for : 15.80 Sqm

Description
Unit
Quantity
Details for 7.9m long and 1.00m high wall
Area of contact 2x7.9x1.0 = 15.8 sqm.
Materials:
Assuming shuttering material will be unsevicea- ble after use
of times
Adding for maintenance @ 10% of cost
Taking salvage value after full use of material @ 25% of cost
Wall form Panel (1.25x0.5) 2x3x2x2 = 24 Nos
Qty taken for cost of using once = 24x0.85/40 =0.51
100mm channel shoulder 2.5m long, 4x2 = 8
Qty taken for cost of using once = 8x0.85/40 = 0.17
Bridge clip 2x6x2 = 24
Qty taken for cost of using once = 24x0.85/40 =0.51

Rate

each

0.51

1050.00

each

0.17

1160.00

each

0.51

97.00

Page 57 of 2298

7329
7330
9999
9999
0116
0114
9999
9999

Single clip 2x3x2 = 12

Qty taken for cost of using once = 12x0.85/40 =0.255
M.S. Tube 40mm 2x2x8m = 32m
Qty taken for cost of using once = 32x0.85/40=0.68
Nut & Bolts
Carriage
LABOUR:
Fitter Grade-I
Beldar
Shuttering oil
Sundries

each

0.255

77.00

metre

0.68

280.00

L.S.
L.S.

27.62
78.00

1.49
1.49

Day
Day
L.S.
L.S.

3.50
6.00
78.00
52.00

301.00
247.00
1.49
1.49
Total:
3878.78

Add water charges @ 1% on

Add C.P & OH @15% on

3917.57
Cost for 15.80 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 285.14
Rs 285.15

Item Code: 4.3.3

Code

7331
7332
7333
7334
9999
9999
0116
0114
9999
9999

Details of Cost for : 4.50 Sqm

Unit
Quantity

Description
Detail of cost for Size of column 450x450mm and 2.5m high
Area of contact = 4x0.45x2.5 = 4.5 sqm.
Assuming shuttering will become unserviceable after use of
40 times
Add maintenance charges @ 10% of cost of Material
Less salvage value of material after full use @ 25% of cost of
material
Wall form panel (1250x450)
Qty taken for cost of using once = 8x0.85/40 = 0.17
Corner angle 2.5m long
Qty taken for cost of using once = 4x0.85/40 = 0.085
Column clamp (450-1070mm)
Qty taken for cost of using once = 5x0.85/40 = 0.1063
Prop. 2m (2.0-3.5m)
Qty taken for cost of using once = 4x0.85/40 = 0.085
Assembly nut & bolt
Carriage
LABOUR
Fitter Grade-I
Beldar
Shuttering oil
Carriage

Rate

each

0.17

1040.00

each

0.085

340.00

each

0.1063

1220.00

each

0.085

830.00

L.S.
L.S.

27.62
52.00

1.49
1.49

Day
Day
L.S.
L.S.

1.00
2.00
39.00
26.00

301.00
247.00
1.49
1.49
Total:
1416.42

Add water charges @ 1% on

Add C.P & OH @15% on

1430.58
Cost for 4.50 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 365.59
Rs 365.60

Item Code: 4.4.1

P/L C.C. in kerb at near ground level: 1 :2 :4 coarse sand, 20 mm stone agg.
Details of Cost for : 6.00 Cum

DSR-12

Page 58 of 2298

Code

04.001.03

Description
Unit
Details of cost for kerb :
Type the text here!
100m x 30m x 0.20m = 6.00 cum.
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
(Rate as per item no 4.1.3)

Quantity

Rate

6.00

4514.03

Add water charges @ 1% except on [A] i.e on

Total:
0.00

Add C.P & OH @15% except on [A] i.e on

0.00
Cost for 6.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4514.03
Rs 4514.05

Item Code: 4.4.2

P/L C.C. in kerb at near ground level: 1 :3 :6 coarse sand, 20 mm sote agg.
Code

04.001.05

Details of Cost for : 6.00 Cum

Unit
Quantity

Description
Details of cost for kerb :
100m long 20cm deep and 30cm wide
100m x 30m x 0.20m = 6.00 cum.
P/L CC excluding centering - All work up to plinth level: 1:3:6 Coarse sand, 20mmstone a
(Rate as per item no 4.1.5)

Rate

6.00

4024.00

Add water charges @ 1% except on [A] i.e on

Total:
0.00

Add C.P & OH @15% except on [A] i.e on

0.00
Cost for 6.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4024.00
Rs 4024.00

Item Code: 4.5.1

P/F upto floor five level pre- cast C.C. string or lacing courses, copings, bed plates, anchor blocks, plain window sills,
shelves,louvers, steps, stair cases, etc. :- 1 : 1.5 : 3 - 20 mm stone agg. with coarse sand.

Code

04.001.02

0115

DSR-12

Details of Cost for : 0.45 Cum

Description
Unit
Quantity
Details of cost for Plain window sill 15 nos.
15x1m x 0.20m x 0.15m = 0.45cum.
MATERIALS :
Cement concrete 1:1.5:3
P/L CC excluding centering - All work up to plinth level: 1:1:3
0.45
- Coarse sand, 20mmstone
Extra labour for lifting
0.45x0.45x2.5 = 0.51

Coolie
Centering and shuttering
(1) Mould
(i) Plate 3mm thick(2x1xO.15)+(2xO.15xO.2O) = 0.36 sqm. @
23.55kg/m2 = 8.48 kg.
(ii) Flat 10x5mm

Day

0.51

Rate

4904.97

247.00

Page 59 of 2298

10.001

11.001.02

11.007
9999

4x1.0 = 4.0m
8x0.2 = 1.6m
4x0.15 = 0.60m
Handle 2x0.25 = 0.5m
=6.70 m @ 0.4kg/m = 2.68 kg.
Total = 11.16kg. or 0.112 qtl.
Assuming shuttering will become unserviceable after use of
40 times and taking 75% credit.
Qty taken for cost of using once =
Structural steel work in single section fixed with or without
connecting plate including a
(Rate as per item no.10.1 S.H. steel work)
2. Moulding Platform
Assuming platform will become unserviceable after use of 40
times,
(i) Brick on edge flooring cement mortar 1-:6
1x2.0x2.0m = 4 sqm. Qty taken for cost of
using once = 4/40 = 0.1 sqm
Brick on edge flooring with 75 class designation bricks in
cement mortar : 1:6- coarse san
(ii) 25mm thick cement concrete 1:2:4 in pavement
2.00x2.00x0.025 = 0.10cum
Qty taken for cost of using once = 0.100/40
= 0.0025 cum
CC pavement with 1:2:4 with 20mm nominal size stone Cum
aggregate ....
(G) Mortar and labour for hoisting and finishing
L.S.

0.21

59.90

0.10

455.91

0.0025

4725.94

36.30

1.49
Total:
180.06

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

181.86
Cost for 0.45 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5525.24
Rs 5528.25

Item Code: 4.5.2

P/F upto floor five level pre- cast C.C. string or lacing courses, copings, bed plates, anchor blocks, plain window sills,
shelves,louvers, steps, stair cases, etc. :- 1 : 2 : 4 - 20 mm stone agg. with coarse sand.

Code

04.001.03

DSR-12

Details of Cost for : 0.45 Cum

Description
Unit
Quantity
Details of cost for Plain window sill 15 nos.
15x1m x 0.20m x 0.15m = 0.45cum.
MATERIALS :
Cement concrete 1:2:4
P/L CC excluding centering - All work up to plinth level: 1:2:4 - Cum
0.45
Coarse sand, 20mmstone a
Centering and shuttering
(1) Mould
(i) Plate 3mm thick
(2x1x0.15)+(2x0.15x0.20) = 0.36 sqm. @
23.55kg/m2 = 8.48 kg.
(ii) Flat 10x5mm
4x1.0 = 4.0m
8x0.2 = 1.6m
4x0.15 = 0.60m
Handle 2x0.25 = 0.5m
=6.70m@ 0.4kg/m = 2.68 kg.

Rate

4514.03

Page 60 of 2298

Total = 11.16kg. or 0.112 qtl.

Assuming shuttering will become unserviceable after use of
40 times and taking 75% credit.
Qty taken for cost of using once = 0.112x0.75/40 = 0.0021 qtl
10.001

Structural steel work in single section fixed with or without

connecting plate including a
Extra labour for lifting of material
0.45x0.45x2.50=0.51

0.21

59.90

0115

Coolie
Day
2. Moulding Platform
Assuming platform will become unserviceable after use of 40
times,
(i) Brick on edge flooring cement mortar1:6
1x2.0x2.0m = 4 sqm Qty taken for cost of
using once = 4/40 =0.1 sqm
Brick on edge flooring with 75 class designation bricks in
cement mortar : 1:6- coarse san
(ii) 25mm thick cement concrete 1:2:4 in pavement
2.00 x2.00x0.025 = 0.1
Qty taken for cost of using once = 0.100/40 = 0.0025 cum
CC pavement with 1:2:4 with 20mm nominal size stone Cum
aggregate ....
(G) Mortar and labour for hoisting and finishing
L.S.

0.51

247.00

0.10

455.91

0.0025

4725.94

36.30

1.49
Total:
180.06

11.001.02

11.007
9999

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

181.86
Cost for 0.45 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5134.29
Rs 5137.35

Item Code: 4.5.3

P/F upto floor five level pre- cast C.C. string or lacing courses, copings, bed plates, anchor blocks, plain window sills,
shelves,louvers, steps, stair cases, etc. :- 1 : 3 : 6 - 20 mm stone agg. with coarse sand.

Code

04.001.05

DSR-12

Details of Cost for : 0.45 Cum

Description
Unit
Quantity
Details of cost for Plain window sill 15 nos.
15x1m x 0.20m x 0.15m = 0.45cum.
MATERIALS :
Cement concrete 1:3:6
P/L CC excluding centering - All work up to plinth level: 1:3:6 - Cum
0.45
Coarse sand, 20mmstone a
Centering and shuttering
(1) Mould
(i) Plate 3mm thick
(2x1x0.15)+(2x0.15x0.20) = 0.36 sqm. @
23.55kg/m2 = 8.48 kg.
(ii) Flat 10x5mm
4x1.0 = 4.0m
8x0.2 = 1.6m
4x0.15 = 0.60m
Handle 2x0.25 = 0.5m
=6.70m@ 0.4kg/m = 2.68 kg.
Total = 11.16kg. or 0.112 qtl.

Rate

4024.00

Page 61 of 2298

Assuming shuttering will become unserviceable after use of

40 times and taking 75% credit.
Qty taken for cost of using once = 0.112x0.75/40 = 0.0021 qtl
10.001

Structural steel work in single section fixed with or without

connecting plate including a
Extra labour for lifting of material
0.45x0.45x2.50=0.51

0.21

59.90

0115

Coolie
Day
2. Moulding Platform
Assuming platform will become unserviceable after use of 40
times,
(i) Brick on edge flooring cement mortar1:6
1x2.0x2.0m = 4 sqm Qty taken for cost of
using once = 4/40 =0.1 sqm
Brick on edge flooring with 75 class designation bricks in
cement mortar : 1:6- coarse san
(ii) 25mm thick cement concrete 1:2:4 in pavement
2.00 x2.00x0.025 = 0.1
Qty taken for cost of using once = 0.100/40 = 0.0025 cum
CC pavement with 1:2:4 with 20mm nominal size stone Cum
aggregate ....
(G) Mortar and labour for hoisting and finishing
L.S.

0.51

247.00

0.10

455.91

0.0025

4725.94

36.30

1.49
Total:
180.06

11.001.02

11.007
9999

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

181.86
Cost for 0.45 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4644.27
Rs 4323.50

Item Code: 4.6.1

P/L C.C. 1 :2 :4 in kerb at ground level .
Code

Description

Details of Cost for : 0.60 Cum

Unit
Quantity

Rate

Finishing
0.4(0.3+0.2+0.20)=0.28x25 = 7.0sqm.

DSR-12

13.016.01
04.001.03

6 mm CP of mix : 1:3 (1 cement: 3 fine sand)

Sqm
P/L CC excluding centering - All work up to plinth level: 1:2:4 - Cum
Coarse sand, 20mmstone a
Centering and shuttering
(1) Mould
(i) Plate 3mm thick
0.28 sqm. @ 23.55kg/m2 = 6.59 kg.
(ii) Flat 10x5mm
Handle
2x0.25 x0.4 = @ 0.4kg/m = 0.20 kg.
= 6.79kg. or 0.068 qtl.
Assuming shuttering will become
unserviceable after use of 40 times and
taking 75% credit.
Qty taken for cost of using once
= 0.068x0.75/40 = 0.001275 qtl

10.001

Structural steel work in single section fixed with or without Kg

connecting plate including a

0.00
0.60

101.02
4514.03

0.1275

59.90

Page 62 of 2298

2. Moulding Platform
Assuming platform will become
unserviceable after use of 40 times.
(i) Brick on edge flooring cement mortar 1:6
1x2.0x2.0m = 4 sqm.
Qty taken for cost of using once = 4/40
= 0.1 sqm
11.001.02

Brick on edge flooring with 75 class designation bricks in Sqm

cement mortar : 1:6- coarse san
(ii) 25mm thick cement concrete 1:2:4 in
pavement
2.00x2.00x0.025 = 0.10
Qty taken for cost of using once = 0.100/40
= 0.0025 cum

0.10

455.91

11.007

CC pavement with 1:2:4 with 20mm nominal size stone Cum

aggregate ....
(G) Mortar and labour for finishing
L.S.

0.0025

4725.94

30.54

1.49
Total:
45.50

9999

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E] i.e on

45.96
Cost for 0.60 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4710.52
Rs 4712.80

Item Code: 4.7.1

P/F upto floor five level pre- cast C.C. solid block i/c hoisting and setting with C.M. 1 : 3 : 1 : 2 : 4 - 20 mm stone agg. with coarse
sand.
Details of Cost for : 0.60 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for 25 no blocks,
40x20x30cm
=25 no x 0.40m x 0.30m x 0.20m = 0.60 cum
MATERIALS:
Cement concrete 1:2:4
04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.60
4514.03
Coarse sand, 20mmstone a
Centering and shuttering
(1) Mould
(i) Plate 3mm thick
0.28 sqm. @ 23.55kg/m2 = 6.59 kg.
(ii) Flat 10x5mm
Handle
2x0.25 x0.4 = @ 0.4kg/m = 0.20 kg.
= 6.79kg. or 0.068 qtl.
Assuming shuttering will become unserviceable after use of
40 times and taking 75% credit.
Qty taken for cost of using once =
0.068x0.75/40 = 0.001275 qtl
10.001
Structural steel work in single section fixed with or without
0.1275
59.90
connecting plate including a
2. Moulding Platform
Assuming platform will become unserviceable after use of 40
times,
(i) Brick on edge flooring cement mortar 1:6

DSR-12

Page 63 of 2298

11.001.02

11.007

03.008

0115
0123
0114

1x2.0x2.0m = 4 sqm.
Qty taken for cost of using once = 4/40 = 0.1 sqm
Rate as per item no. 11.1.2 S.H.: Flooring
Brick on edge flooring with 75 class designation bricks in
cement mortar : 1:6- coarse san
(ii) 25mm thick cement concrete 1:2:4 in
pavement
2.00x2.00x0.025 = 0.10
Qty taken for cost of using once = 0.100/40
= 0.0025 cum
CC pavement with 1:2:4 with 20mm nominal size stone
aggregate ....
Mortar 1:3 for Fixing
(D) 0.202/100x25=0.051
Cement mortar 1:3 (1 cement : 3 coarse sand)
Extra for Labour for fixing
(27/100x25=0.675 or 0.68)
(D) Coolie
Day
Labour for hoisting and setting in position
(D) Mason 1st class
Day
(D) Beldar
Day

0.10

455.91

0.0025

4725.94

0.051

4145.53

0.68

247.00

0.60
3.60

301.00
247.00
Total:
1449.18

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

1463.67
Cost for 0.60 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 7427.80
Rs 7758.85

Item Code: 4.7.2

P/F upto floor five level pre- cast C.C. solid block i/c hoisting and setting with C.M. 1 : 3 : 1 : 3 : 6 - 20 mm stone agg. with coarse
sand.
Details of Cost for : 0.60 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for 25 no blocks, 40x20x30cm =25 no x 0.40m x
0.30m x 0.20m = 0.6 cum
MATERIALS:
(A) Cement concrete 1:3:6
04.001.05 P/L CC excluding centering - All work up to plinth level: 1:3:6 0.60
4024.00
Coarse sand, 20mmstone a
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.051
4145.53
(Rate as per item no. 3.8)
Centering and shuttering
(1) Mould
(i) Plate 3mm thick.
0.28 sqm. @ 23.55kg/m2 = 6.59 kg.
(ii) Flat 10x5mm Handle
2x0.25 xO.4 = @ 0.4kg/m = 0.20 kg.
= 6.79kg. or 0.068 qtl.
Assuming shuttering will become unserviceable after use of
40 times and taking 75% credit.
Qty taken for cost of using once
= 0.068x0.75/40 = 0.001275 qtl
10.001
Structural steel work in single section fixed with or without
0.1275
59.90
connecting plate including a
2. Moulding Platform
Assuming platform will become unserviceable after use of 40
times,

DSR-12

Page 64 of 2298

11.001.02

11.007

0115
0123
0114

(i) Brick on edge flooring cement mortar 1:6

1x2.0x2.0m = 4 sqm.
Qty taken for cost of using once = 4/40 = 0.1 sqm
Rate as per item no. 11.1.2 S.H.: Flooring
Brick on edge flooring with 75 class designation bricks in
cement mortar : 1:6- coarse san
(ii) 25mm thick cement concrete 1:2:4 in pavement
2.00x2.00x0.025 = 0.100
Qty taken for cost of using once = 0.100/40 = 0.0025 cum
CC pavement with 1:2:4 with 20mm nominal size stone
aggregate ....
Extra Labour for lifting material upto floor V level
(C) Labour
Coolie
Day
(C) Labour for hoisting and setting in position
Mason 1st class
Day
Beldar
Day

0.10

455.91

0.0025

4725.94

0.68

247.00

0.60
3.60

301.00
247.00
Total:
1449.18

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

1463.67
Cost for 0.60 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 6937.77
Rs 6940.05

Item Code: 4.8.1

P/F upto floor five level pre- cast C.C. hollow block i/c hoisting and setting with C.M. 1 : 3. 1 : 2 : 4 - 20 mm stone agg. with coarse
sand.
Details of Cost for : 0.05 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for one block of overall size 1m x 0.50m and
0.10m thick having 6 vertical hollows, 40x20x30cm finished
contents = 1mx0.5mx0.1m = 0.05cum
MATERIALS:
Cement concrete 1:2:4
04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.023
4514.03
Coarse sand, 20mmstone a
= 0.023cum (Rate as per Item no. 4.1.3)
9999
(B) Centering and shuttering including T&P charges, hire L.S.
26.91
1.49
charges of steel mould, table vib
(C) Extra Labour for lifting material upto floor V level
0115
Coolie
Day
0.056
247.00
(C) Labour for hoisting and setting in position
0123
Mason 1st class
Day
0.05
301.00
0114
Beldar
Day
0.30
247.00
03.007
Cement mortar 1:2 (1 cement : 2 coarse)
0.002
4863.86
(Rate as per item No. 3.7)
Total:
Add water charges @ 1% except on [A] i.e on
152.81
Add C.P & OH @15% except on [A] i.e on
154.34
Cost for 0.05 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5626.20
Rs 5626.20

Item Code: 4.8.2

DSR-12

Page 65 of 2298

P/F upto floor five level pre- cast C.C. hollow block i/c hoisting and setting with C.M. 1 : 3. 1 : 2 : 4 - 20 mm stone agg. with coarse
sand.
Details of Cost for : 0.05 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for one block of overall size 1m x 0.50m and
0.10m thick having 6 vertical hollows, 40x20x30cm finished
contents = lmx0.5mx0.lm = 0.05cum
MATERIALS :
Cement concrete 1:3:6
04.001.05 P/L CC excluding centering - All work up to plinth level: 1:3:6 0.023
4024.00
Coarse sand, 20mmstone a
= 0.023cum (Rate as per Item no. 4.1.5 )
9999
(B) Centering and shuttering including T&P charges, hire L.S.
26.91
1.49
charges of steel mould, table vib
(D) Extra Labour for lifting material upto floor V level
0115
Coolie
Day
0.056
247.00
(D) Labour for hoisting and setting in position
0123
Mason 1 st class
Day
0.05
301.00
0114
Beldar
Day
0.30
247.00
03.007
Cement mortar 1:2 (1 cement : 2 coarse)
0.002
4863.86
(Rate as per item No. 3.7)
Total:
Add water charges @ 1% except on [A] i.e on
152.81
Add C.P & OH @15% except on [A] i.e on
154.34
Cost for 0.05 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5400.80
Rs 5400.80

Item Code: 4.9

Precasting and Placing 125 mm dia. Bollards 600 mm high i/c providing MS Pipe Sleeve 50 mm ,300mm long in the Bollard and MS
pipe 40 mm, 450mm long with 150x150 x 6 mm MS plate welded at bottom.

Code

05.001.03

05.009.01

10.001

02.008.01

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for one bollard
MATERIALS :
Cement concrete 1:2:4
P/L specified grade of RCC excluding centering, shuttering,
0.007
finishing and reinforcement Rate as per Item no. 5.1.3 SH : RCC )
Centering and shuttering
Centering & shuttering including strutting, propping etc. 0.24
Foundations, footings, bases o
(Rate as per Item no. 5.9.1 SH : RCC)
M.S. pipes (medium class)
50 mm dia sleeve =1x0.30x5.10=1.53 kg
40 mm dia pipe =1x0.45x3.61 =1.62 kg
M.S. plate 3mm thick =(0.15x0.15)x23.55
=0.53 kg
Structural steel work in single section fixed with or without
3.68
connecting plate including a
(Rate as per Item no. 10.1 SH : Steel work)
Excavation
E/W excavation in foundation trenches .. .. All kinds of soil.
0.03

Rate

4703.91

166.88

59.90

130.78

(Rate as per Item no. 2.8.1 SH : Earth work)

DSR-12

Page 66 of 2298

04.001.05

05.023

9999

P/L CC excluding centering - All work up to plinth level: 1:3:6 Coarse sand, 20mmstone a
(Rate as per Item no. 4.1.5 SH : Cement concrete)
Smooth finishing of exposed surface in RCC work with 6 mm
CM 1:3.
(Rate as per Item no. 5.23)
Carriage and fixing charges
L.S.

0.03

4024.00

0.25

101.02

13.00

1.49
Total:
19.37

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

19.56
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 465.80
Rs 465.80

Item Code: 4.10

P/L damp-proof course 40mm thick with CC 1:2:4 - Coarse sand - stone aggregate 12.5mm size.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Qty of CC 1:2:4 :
10.00 x 0.04 = 0.40 cum
04.001.03

P/L CC excluding centering - All work up to plinth level: 1:2:4 - Cum

Coarse sand, 20mmstone a
Add Dedut for diffence of cost between 20mm size and
12.5mm size

0295
0296
0123
0124
9999

Stone aggregate 20mm

Stone aggregate 12.5mm (one size)
Mason I class
Mason II class
Sundries - Form work etc.,

Rate

0.40

4514.03

cum
cum
Day
Day

0.27
-0.27
0.40
0.40

1050.00
1050.00
301.00
273.00

L.S.

1.95

1.49
Total:
232.51

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

234.84
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 207.57
Rs 207.55

Item Code: 4.11

P/L damp-proof course 40mm thick with CC 1:2:4 - Coarse sand - stone aggregate 20mm size.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Qty of Cement concrete 1:2:4 = 10x0.05 = 0.50 cum
04.001.03

P/L CC excluding centering - All work up to plinth level: 1:2:4 - Cum

Coarse sand, 20mmstone a
Add for delay :

0123
0124
9999

Mason I class
Mason II class
Sundries (Form work etc.)

Day
Day
L.S.

0.50

4514.03

0.40
0.40
13.52

301.00
273.00
1.49
Total:
249.74

Add water charges @ 1% except on [A] i.e on

DSR-12

Rate

Page 67 of 2298

Add C.P & OH @15% except on [A] i.e on

252.24
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 254.71
Rs 254.70

Item Code: 4.12

Extra for mixing water proofing material in CC work @ 1 kg per 50kg of cement.
Details of Cost for : 1.00 units
Code
Description
Unit
Quantity
1213
Water proofing material
kilog
1.00
(Approved water proofingmaterials according to the
recommended proportions)
9999
Carriage of water proofing material and labour for mixing etc. L.S.
3.64

Add water charges @ 1% on

Rate
25.00

1.49
Total:
30.42

Add C.P & OH @15% on

30.72
Cost for 1.00 units
Rate per Units:
Rate as per DSR-12:

Rs 35.33
Rs 35.35

Item Code: 4.13

Applying a coat of residual petroleum bitumen of penetration 80/100 on damp proof course .. ..
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
0309
Paving bitumen S-90 of approved quality
tonne
0.017
37000.00
0771
Kerosene oil
litre
1.23
30.00
0370
Fuel (steam coal)
quint
0.035
400.00
2211
Carraige of Tar bitumen
tonne
0.017
87.60
Cleaning surface and applying kerosene oil
0114
0115

0131
9999

Beldar
Coolie
LABOUR:
(For heating the material)
Painter
(For Spreading hot tar over damp proof course)
Sundries (Carriage of kerosene, steam coal, brushes, T&P etc.)

Day
Day

0.12
0.07

247.00
247.00

Day

0.20

273.00

L.S.

33.15

1.49

Add water charges @ 1% on

Total:
832.31

Add C.P & OH @15% on

840.63
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 96.67
Rs 96.65

Item Code: 4.14

Extra for concrete work in SS above floor V
Code

DSR-12

Description

Details of Cost for : 1.00 Cum

Unit
Quantity

Rate

Page 68 of 2298

0115

Extra labour element required for lifting of materials

(0.75x2.00 = 1.50)
Coolie
Day

1.50

Add water charges @ 1% on

247.00
Total:
370.50

Add C.P & OH @15% on

374.21
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 430.34
Rs 539.35

Item Code: 4.15

Extra for laying concrete in or under water and/or liquid mud
Code

0011
0114

Details of Cost for : 4.20 unit

Description
Unit
Quantity
Details of cost for depth of water 0.30 m.
Quantity of concrete = 14 cum.
pumping hours = 3 hrs. or 0.75 day.
Cost of pumping water with 3636.8 litres per hour capacity Day
0.375
pump
Beldar for cleaning slush
Day
4.00
Add water charges @ 1% on

Rate

500.00
247.00
Total:
1175.50

Add C.P & OH @15% on

1187.26
Cost for 4.20 unit
Rate per Units:
Rate as per DSR-12:

Rs 325.08
Rs 325.10

Item Code: 4.16

Extra for CC in or under foul position
Code
0123
0124
0114
0115

Description
Extra labour due to slow progressMason 1st class
Mason 2nd class
Beldar
Coolie

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day
Day
Day

0.02
0.02
0.25
0.15

Add water charges @ 1% on

Rate
301.00
273.00
247.00
247.00
Total:
110.28

Add C.P & OH @15% on

111.38
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 128.09
Rs 128.10

Item Code: 4.17

Making plinth protection 50mm thick of CC 1:3:6 - Coarse sand - stone aggregate 20mm -over 75mm bed by dry brick ballast 40mm.

Code
0287
2260

DSR-12

Description
MATERIALS
Brick aggregate 40 mm size
Carriage of brick aggregate

Details of Cost for : 10.00 Sqm

Unit
Quantity
cum
cum

0.75
0.75

Rate
500.00
95.22

Page 69 of 2298

0983
2261

Fine sand 60 cu.dm. per 10 sqm

Carriage of fine sand
Dressing the gound including cutting and filling upto 15cm

0114
0115

Beldar
Day
Coolie
Day
Cement concrete 1:3:6 Qty. of cement concrete 1:3:6 on 10
sqm. area = 0.5cum.
Materials (for C.C 1:3:6)
Stone aggregate 20 mm nominal size
cum
Stone aggregate 10 mm nominal size
cum
Carriage of stone aggregate
cum
Coarse sand
cum
Carriage of coarse sand
cum
Cement
tonne
Carriage of cement
tonne
Labour (for C.C 1:3:6)
Beldar
Day
Mason 1st class
Day
Bhisti
Day
Hire and runing charges of mechanical mixer
L.S.
Sundries
L.S.
LABOUR
Mason
Day
Beldar
Day
Coolie
Day

0295
0297
2202
0982
2203
0367
2209
0114
0123
0101
9999
9999
0155
0114
0115

cum
cum

0.06
0.06

640.00
87.60

0.16
0.11

247.00
247.00

0.35
0.12
0.47
0.23
0.23
0.11
0.11

1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87

1.00
0.05
0.33
13.39
6.76

247.00
301.00
260.00
1.49
1.49

0.27
1.08
1.08

287.00
247.00
247.00
Total:
2916.64

Add water charges @ 1% on

Add C.P & OH @15% on

2945.81
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 338.77
Rs 338.75

Item Code: 4.18

Extra for addition of synthetic polyester triangular fibre in cement concrete/ RCC/ Flooring /water retaining structures etc.,

Code
8732

Description

Details of Cost for : 1.00 units

Unit
Quantity

MATERIALS:
Synthetic Polyester triangular fibre of length 12 mm, i/c kg
labour for mixing.

Rate

0.125

365.00

Add water charges @ 1% on

Total:
45.63

Add C.P & OH @15% on

46.09
Cost for 1.00 units
Rate per Units:
Rate as per DSR-12:

Rs 53.00
Rs 53.00

Item Code: 4.19.1.1

Providing and laying in position RMC using flyash and cement manufactured in automated plant including pumping of RMC and
admixtures - All work upto plinth level - M15
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:

DSR-12

Page 70 of 2298

0293
0295
2206
2202
0982
2203
1980
2262
0367
2209
7318

0004
0029
0009

0155
0114
0101
0012
9999

Stone Aggregate (Single size) : 40 mm nominal size

(0.70% - 7.5% for voids i.e 0.05 = 0.65 cum)
Stone Aggregate (Single size) : 20 mm nominal size
Carraige of Stone aggregate 40 mm nominal size and above

cum

0.65

950.00

cum
cum

0.24
0.65

1050.00
95.22

Carraige of Stone aggregate below 40 mm nominal size

Coarse sand (zone III)
Carraige of Coarse sand
Fly ash
Carraige of Fly ash
Portland Cement
Carraige of Cement
Plasticizer / super plasticizer
Production cost, Carriage to site, pumping to respective floors
and laying in position.
Production cost of concrete by batch mix plant.
Carriage of concrete by transit mixer.
Pumping charges of concrete including Hire charges of pump,
piping work & accessories etc.
LABOUR :
For pouring, consolidating and curing
Mason (average)
Beldar
Bhisti
Vibrator (Needle type 40mm)
Sundries

cum
cum
cum
cum
cum
tonne
tonne
kilog

0.24
0.37
0.37
0.21
0.21
0.24
0.24
1.20

87.60
1120.00
87.60
7.75
87.60
5000.00
77.87
36.50

cum
km/ c
cum

1.00
10.00
1.00

350.00
30.00
130.00

Day
Day
Day
Day
L.S.

0.17
2.00
0.90
0.07
13.00

287.00
247.00
260.00
300.00
1.49
Total:
4278.90

Add water charges @ 1% on

Add C.P & OH @15% on

4321.69
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4969.94
Rs 4969.95

Item Code: 4.19.1.2

Providing and laying in position RMC using flyash and cement manufactured in automated plant including pumping of RMC and
admixtures - All work upto plinth level - M10 grade
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
0293
Stone Aggregate (Single size) : 40 mm nominal size
cum
0.65
950.00
(0.70% - 7.5% for voids i.e 0.05 = 0.65 cum)
0295
Stone Aggregate (Single size) : 20 mm nominal size
cum
0.24
1050.00
2206
Carraige of Stone aggregate 40 mm nominal size and above
cum
0.65
95.22
2202
0982
2203
1980
2262
0367
2209
7318

0004
0029

DSR-12

Carraige of Stone aggregate below 40 mm nominal size

Coarse sand (zone III)
Carraige of Coarse sand
Fly ash
Carraige of Fly ash
Portland Cement
Carraige of Cement
Plasticizer / super plasticizer
Production cost, Carriage to site, pumping to respective floors
and laying in position.
Production cost of concrete by batch mix plant.
Carriage of concrete by transit mixer.

cum
cum
cum
cum
cum
tonne
tonne
kilog

0.24
0.37
0.37
0.21
0.21
0.22
0.22
1.10

87.60
1120.00
87.60
7.75
87.60
5000.00
77.87
36.50

cum
km/ c

1.00
10.00

350.00
30.00

Page 71 of 2298

0009

0155
0114
0101
0012
9999

Pumping charges of concrete including Hire charges of pump,

piping work & accessories etc.
LABOUR :
For pouring, consolidating and curing
Mason (average)
Beldar
Bhisti
Vibrator (Needle type 40mm)
Sundries

cum

1.00

130.00

Day
Day
Day
Day
L.S.

0.17
2.00
0.90
0.07
13.00

287.00
247.00
260.00
300.00
1.49
Total:
4173.69

Add water charges @ 1% on

Add C.P & OH @15% on

4215.43
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4847.74
Rs 4847.75

Item Code: 4.19.2.1

Providing and laying in position RMC using flyash and cement manufactured in automated plant including pumping of RMC and
admixtures - All work above plinth level to floor V level- M15

Code
0293
0295
2206
2202
0982
2203
1980
2262
0367
2209
7318

0004
0029

0155
0114
0101
0012
9999

0115

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Stone Aggregate (Single size) : 40 mm nominal size
(0.70% - 7.5% for voids i.e 0.05 = 0.65 cum)
Stone Aggregate (Single size) : 20 mm nominal size
Carraige of Stone aggregate 40 mm nominal size and above
Carraige of Stone aggregate below 40 mm nominal size
Coarse sand (zone III)
Carraige of Coarse sand
Fly ash
Carraige of Fly ash
Portland Cement
Carraige of Cement
Plasticizer / super plasticizer
Production cost, Carriage to site, pumping to respective floors
and laying in position.
Production cost of concrete by batch mix plant.
Carriage of concrete by transit mixer.
LABOUR :
For pouring, consolidating and curing
Mason (average)
Beldar
Bhisti
Vibrator (Needle type 40mm)
Sundries
Extra labour for lifting of material upto floor five level = 0.75 x
2.5 = 1.88
Coolie

Rate

cum

0.65

950.00

cum
cum

0.24
0.65

1050.00
95.22

cum
cum
cum
cum
cum
tonne
tonne
kilog

0.24
0.37
0.37
0.21
0.21
0.24
0.24
1.20

87.60
1120.00
87.60
7.75
87.60
5000.00
77.87
36.50

cum
km/ c

1.00
10.00

350.00
30.00

Day
Day
Day
Day
L.S.

0.17
2.00
0.90
0.07
13.00

287.00
247.00
260.00
300.00
1.49

Day

1.88

247.00
Total:
4613.26

Add water charges @ 1% on

Add C.P & OH @15% on

4659.39
Cost for 1.00 Cum
Rate per One Cum:

DSR-12

Rs 5358.30

Page 72 of 2298

Rate as per DSR-12:

Rs 5358.30

Item Code: 4.19.2.2

Providing and laying in position RMC using flyash and cement manufactured in automated plant including pumping of RMC and
admixtures - All work above plinth level to floor V level- M10

Code
0293
0295
2206
2202
0982
2203
1980
2262
0367
2209
7318

0004
0029

0155
0114
0101
0012
9999

0115

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Stone Aggregate (Single size) : 40 mm nominal size
(0.70% - 7.5% for voids i.e 0.05 = 0.65 cum)
Stone Aggregate (Single size) : 20 mm nominal size
Carraige of Stone aggregate 40 mm nominal size and above
Carraige of Stone aggregate below 40 mm nominal size
Coarse sand (zone III)
Carraige of Coarse sand
Fly ash
Carraige of Fly ash
Portland Cement
Carraige of Cement
Plasticizer / super plasticizer
Production cost, Carriage to site, pumping to respective floors
and laying in position.
Production cost of concrete by batch mix plant.
Carriage of concrete by transit mixer.
LABOUR :
For pouring, consolidating and curing
Mason (average)
Beldar
Bhisti
Vibrator (Needle type 40mm)
Sundries
Extra labour for lifting of material upto floor five level = 0.75 x
2.5 = 1.88
Coolie

Rate

cum

0.65

950.00

cum
cum

0.24
0.65

1050.00
95.22

cum
cum
cum
cum
cum
tonne
tonne
kilog

0.24
0.37
0.37
0.21
0.21
0.22
0.22
1.10

87.60
1120.00
87.60
7.75
87.60
5000.00
77.87
36.50

cum
km/ c

1.00
10.00

350.00
30.00

Day
Day
Day
Day
L.S.

0.17
2.00
0.90
0.07
13.00

287.00
247.00
260.00
300.00
1.49

Day

1.88

247.00
Total:
4508.05

Add water charges @ 1% on

Add C.P & OH @15% on

4553.13
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5236.10
Rs 5236.10

Item Code: 4.20.1.1

Providing and laying in position RMC manufactured in automated plant including pumping of RMC and admixtures - All work upto
plinth level - M15
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
0293
Stone Aggregate (Single size) : 40 mm nominal size
cum
0.65
950.00
(0.70% - 7.5% for voids i.e 0.05 = 0.65 cum)
0295
Stone Aggregate (Single size) : 20 mm nominal size
cum
0.24
1050.00
2206
Carraige of Stone aggregate 40 mm nominal size and above
cum
0.65
95.22
2202
0982

DSR-12

Carraige of Stone aggregate below 40 mm nominal size

Coarse sand (zone III)

cum
cum

0.24
0.47

87.60
1120.00

Page 73 of 2298

2203
0367
2209
7318

0004
0029
0009

0155
0114
0101
0012
9999

Carraige of Coarse sand

Portland Cement
Carraige of Cement
Plasticizer / super plasticizer
Production cost, Carriage to site, pumping to respective floors
and laying in position.
Production cost of concrete by batch mix plant.
Carriage of concrete by transit mixer.
Pumping charges of concrete including Hire charges of pump,
piping work & accessories etc.
LABOUR :
For pouring, consolidating and curing
Mason (average)
Beldar
Bhisti
Vibrator (Needle type 40mm)
Sundries

cum
tonne
tonne
kilog

0.47
0.24
0.24
1.20

87.60
5000.00
77.87
36.50

cum
km/ c
cum

1.00
10.00
1.00

350.00
30.00
130.00

Day
Day
Day
Day
L.S.

0.17
2.00
0.90
0.07
13.00

287.00
247.00
260.00
300.00
1.49
Total:
4379.63

Add water charges @ 1% on

Add C.P & OH @15% on

4423.43
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5086.94
Rs 5086.95

Item Code: 4.20.1.2

Providing and laying in position RMC manufactured in automated plant including pumping of RMC and admixtures - All work upto
plinth level - M10 PCC
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
0293
Stone Aggregate (Single size) : 40 mm nominal size
cum
0.65
950.00
(0.70% - 7.5% for voids i.e 0.05 = 0.65 cum)
0295
Stone Aggregate (Single size) : 20 mm nominal size
cum
0.24
1050.00
2206
Carraige of Stone aggregate 40 mm nominal size and above
cum
0.65
95.22
2202
0982
2203
0367
2209
7318

0004
0029
0009

0155
0114
0101
0012
9999

Carraige of Stone aggregate below 40 mm nominal size

Coarse sand (zone III)
Carraige of Coarse sand
Portland Cement
Carraige of Cement
Plasticizer / super plasticizer
Production cost, Carriage to site, pumping to respective floors
and laying in position.
Production cost of concrete by batch mix plant.
Carriage of concrete by transit mixer.
Pumping charges of concrete including Hire charges of pump,
piping work & accessories etc.
LABOUR :
For pouring, consolidating and curing
Mason (average)
Beldar
Bhisti
Vibrator (Needle type 40mm)
Sundries

cum
cum
cum
tonne
tonne
kilog

0.24
0.47
0.47
0.22
0.22
1.10

87.60
1120.00
87.60
5000.00
77.87
36.50

cum
km/ c
cum

1.00
10.00
1.00

350.00
30.00
130.00

Day
Day
Day
Day
L.S.

0.17
2.00
0.90
0.07
13.00

287.00
247.00
260.00
300.00
1.49
Total:
4274.42

Add water charges @ 1% on

DSR-12

Page 74 of 2298

Add C.P & OH @15% on

4317.16
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4964.73
Rs 4964.75

Item Code: 4.20.2.1

Providing and laying in position RMC manufactured in automated plant including pumping of RMC and admixtures - All work above
plinth level to floor V level- M15 PCC
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
0293
Stone Aggregate (Single size) : 40 mm nominal size
cum
0.65
950.00
(0.70% - 7.5% for voids i.e 0.05 = 0.65 cum)
0295
Stone Aggregate (Single size) : 20 mm nominal size
cum
0.24
1050.00
2206
Carraige of Stone aggregate 40 mm nominal size and above
cum
0.65
95.22
2202
0982
2203
0367
2209
7318

0004
0029

0155
0114
0101
0012
9999

0115

Carraige of Stone aggregate below 40 mm nominal size

Coarse sand (zone III)
Carraige of Coarse sand
Portland Cement
Carraige of Cement
Plasticizer / super plasticizer
Production cost, Carriage to site, pumping to respective floors
and laying in position.
Production cost of concrete by batch mix plant.
Carriage of concrete by transit mixer.
LABOUR :
For pouring, consolidating and curing
Mason (average)
Beldar
Bhisti
Vibrator (Needle type 40mm)
Sundries
Extra labour for lifting of material upto floor five level = 0.75 x
2.5 = 1.88
Coolie

cum
cum
cum
tonne
tonne
kilog

0.24
0.47
0.47
0.24
0.24
1.20

87.60
1120.00
87.60
5000.00
77.87
36.50

cum
km/ c

1.00
10.00

350.00
30.00

Day
Day
Day
Day
L.S.

0.17
2.00
0.90
0.07
13.00

287.00
247.00
260.00
300.00
1.49

Day

1.88

247.00
Total:
4713.99

Add water charges @ 1% on

Add C.P & OH @15% on

4761.13
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5475.30
Rs 5475.30

Item Code: 4.20.2.2

Providing and laying in position RMC manufactured in automated plant including pumping of RMC and admixtures - All work above
plinth level to floor V level- M10 PCC
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
0293
Stone Aggregate (Single size) : 40 mm nominal size
cum
0.65
950.00
(0.70% - 7.5% for voids i.e 0.05 = 0.65 cum)
0295
Stone Aggregate (Single size) : 20 mm nominal size
cum
0.24
1050.00
2206
Carraige of Stone aggregate 40 mm nominal size and above
cum
0.65
95.22
2202

DSR-12

Carraige of Stone aggregate below 40 mm nominal size

cum

0.24

87.60

Page 75 of 2298

0982
2203
0367
2209
7318

0004
0029

0155
0114
0101
0012
9999

0115

Coarse sand (zone III)

Carraige of Coarse sand
Portland Cement
Carraige of Cement
Plasticizer / super plasticizer
Production cost, Carriage to site, pumping to respective floors
and laying in position.
Production cost of concrete by batch mix plant.
Carriage of concrete by transit mixer.
LABOUR :
For pouring, consolidating and curing
Mason (average)
Beldar
Bhisti
Vibrator (Needle type 40mm)
Sundries
Extra labour for lifting of material upto floor five level = 0.75 x
2.5 = 1.88
Coolie

cum
cum
tonne
tonne
kilog

0.47
0.47
0.22
0.22
1.10

1120.00
87.60
5000.00
77.87
36.50

cum
km/ c

1.00
10.00

350.00
30.00

Day
Day
Day
Day
L.S.

0.17
2.00
0.90
0.07
13.00

287.00
247.00
260.00
300.00
1.49

Day

1.88

247.00
Total:
4608.78

Add water charges @ 1% on

Add C.P & OH @15% on

4654.87
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5353.10
Rs 5353.10

Item Code: 5.1.1

P/L specified grade of RCC excluding centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1:2 -coarse
sand - 20 mm stone aggregate)
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
0295
Stone aggregate 20mm
cum
0.64
1050.00
0297
Stone aggregate 10mm
cum
0.21
1050.00
2202
Carriage of aggregate 20mm and 10mm
cum
0.85
87.60
0982
Coarse sand
cum
0.425
1120.00
2203
Carriage of coarse sand
cum
0.425
87.60
0367
Cement (0.425 cum)
tonne
0.61
5000.00
2209
Carriage of cement
tonne
0.61
77.87
LABOUR:
0155
Mason
Day
0.17
287.00
0114
Beldar
Day
2.00
247.00
0101
Bhishti
Day
0.90
260.00
0002
Mixer
Day
0.07
800.00
0012
Vibrator
Day
0.07
300.00
9999
Sundries
L.S.
14.30
1.49
Total:
Add water charges @ 1% on
5452.79
Add C.P & OH @15% on
5507.32
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 6333.42
Rs 6333.40

Item Code: 5.1.2

DSR-12

Page 76 of 2298

P/L specified grade of RCC excluding centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 -coarse
sand - 20 mm stone aggregate)
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS :
0295
20mm stone aggregate
cum
0.57
1050.00
0297
10mm stone aggregate
cum
0.28
1050.00
2202
Carriage of aggregate
cum
0.85
87.60
0982
Coarse sand
cum
0.425
1120.00
2203
Carriage of coarse sand
cum
0.425
87.60
0367
Cement (0.2833 cum)
tonne
0.40
5000.00
2209
Carriage of cement
tonne
0.40
77.87
LABOUR:
0155
Mason
Day
0.17
287.00
0114
Beldar
Day
2.00
247.00
0101
Bhishti
Day
0.90
260.00
0002
Mixer
Day
0.07
800.00
0012
Vibrator
Day
0.07
300.00
9999
Sundries
L.S.
14.30
1.49
Total:
Add water charges @ 1% on
4386.44
Add C.P & OH @15% on
4430.30
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5094.85
Rs 5094.85

Item Code: 5.1.3

P/L specified grade of RCC excluding centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 -coarse
sand - 20 mm stone aggregate)
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
0295
Stone aggregate 20mm
cum
0.67
1050.00
0297
Stone aggregate 10mm
cum
0.22
1050.00
2202
Carriage of aggregate
cum
0.89
87.60
0982
Coarse sand
cum
0.445
1120.00
2203
Carriage of coarse sand
cum
0.445
87.60
0367
Cement (0.2225 cum)
tonne
0.32
5000.00
2209
Carriage of cement
tonne
0.32
77.87
LABOUR:
0155
Mason
Day
0.17
287.00
0114
Beldar
Day
2.00
247.00
0101
Bhishti
Day
0.90
260.00
0002
Mixer
Day
0.07
800.00
0012
Vibrator
Day
0.07
300.00
9999
Sundries
L.S.
14.30
1.49
Total:
Add water charges @ 1% on
4049.86
Add C.P & OH @15% on
4090.36
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4703.91
Rs 4703.90

Item Code: 5.2.1

DSR-12

Page 77 of 2298

RCC work in walls, columns, pillars, piers, etc. up to floor five level excluding cost of centering, shuttering, finishing and
reinforcement : - 1:1:2 -coarse sand - stone aggregate 20 mm)

Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115

Details of Cost for : 9.18 Cum

Unit
Quantity

Description
MATERIALS:
Stone aggregate 20mm
Stone aggregate 10mm
Carraige of Stone aggregate below 40 mm nominal size
Coarse sand
Carraige of Coarse sand
Cement
Carraige of Cement
LABOUR:
Beldar
Coolie
Bhisthi
Mason I class
Mason II class
Hire running charges of concrete mixer
Vibrator (Hire charges)
Sundries
Scaffolding
Extra labour for lifting of material upto floor five
Coolie

Rate

cum
cum
cum
cum
cum
tonne
tonne

5.8752
1.9278
7.803
3.9015
3.9015
5.5998
5.5998

1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87

Day
Day
Day
Day
Day
Day
Day
L.S.
L.S.

11.29
7.53
8.26
0.92
0.92
0.64
0.64
131.82
420.03

247.00
247.00
260.00
301.00
273.00
800.00
300.00
1.49
1.49

Day

17.20

247.00
Total:
55122.07

Add water charges @ 1% on

Add C.P & OH @15% on

55673.29
Cost for 9.18 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 6974.32
Rs 6974.30

Item Code: 5.2.2

RCC work in walls, columns, pillars, piers, etc. up to floor five level excluding cost of centering, shuttering, finishing and
reinforcement : - 1:15:3 -coarse sand - stone aggregate 20 mm)

Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999

DSR-12

Description
MATERIALS:
Stone aggregate 20mm
Stone aggregate 10mm
Carraige of Stone aggregate below 40 mm nominal size
Coarse sand
Carraige of Coarse sand
Cement
Carraige of Cement
LABOUR:
Beldar
Coolie
Bhisthi
Mason I class
Mason II class
Hire running charges of concrete mixer
Vibrator (Hire charges)
Sundries
Scaffolding
Extra labour for lifting of material upto floor five

Details of Cost for : 9.18 Cum

Unit
Quantity

Rate

cum
cum
cum
cum
cum
tonne
tonne

5.2326
2.5704
7.803
3.9015
3.9015
3.672
3.672

1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87

Day
Day
Day
Day
Day
Day
Day
L.S.
L.S.

11.29
7.53
8.26
0.92
0.92
0.64
0.64
131.82
420.03

247.00
247.00
260.00
301.00
273.00
800.00
300.00
1.49
1.49

Page 78 of 2298

0115

Coolie

Day

17.20

Add water charges @ 1% on

247.00
Total:
45332.95

Add C.P & OH @15% on

45786.28
Cost for 9.18 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5735.75
Rs 5735.75

Item Code: 5.2.3

RCC work in walls, columns, pillars, piers, etc. up to floor five level excluding cost of centering, shuttering, finishing and
reinforcement : - 1:2:4 -coarse sand - stone aggregate 20 mm)

Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
9999
9999
0002
0012
0115

Details of Cost for : 9.18 Cum

Unit
Quantity

Description
MATERIALS:
Stone aggregate 20mm
Stone aggregate 10mm
Carraige of Stone aggregate below 40 mm nominal size
Coarse sand
Carraige of Coarse sand
Cement
Carraige of Cement
LABOUR:
Beldar
Coolie
Bhisthi
Mason I class
Mason II class
Sundries
Scaffolding
Hire running charges of concrete mixer
Vibrator (Hire charges)
Extra labour for lifting of material upto floor five
Coolie

Rate

cum
cum
cum
cum
cum
tonne
tonne

6.1506
2.0196
8.1702
4.0851
4.0851
2.9376
2.9376

1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87

Day
Day
Day
Day
Day
L.S.
L.S.
Day
Day

11.29
7.53
8.26
0.92
0.92
131.82
420.03
0.64
0.64

247.00
247.00
260.00
301.00
273.00
1.49
1.49
800.00
300.00

Day

17.20

247.00
Total:
42243.20

Add water charges @ 1% on

Add C.P & OH @15% on

42665.63
Cost for 9.18 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5344.82
Rs 5344.80

Item Code: 5.3

RCC in beams, suspended floors, staircases, etc upto floor 5 level excldg centering, shuttering, finishing,
C'sand-4 20mm metal
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS:
0295
Stone aggregate 20mm
cum
0.67
0297
Stone aggregate 10mm
cum
0.22
2202
Carriage of aggregate
cum
0.89
0982
Coarse sand
cum
0.445
2203
Carriage of coarse sand
cum
0.445
0367
Cement (0.02225/ cum)
tonne
0.32
2209
Carriage of cement
tonne
0.32

DSR-12

reinforcement -1:2:4 -2

Rate
1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87

Page 79 of 2298

0155
0114
0101
0002
0012
9999
0115

LABOUR:
Mason
Beldar
Bhishti
Mixer
Vibrator
Sundries
Extra labour for lifting material upto floor V level:
Coolie (2.5x0.75)

Day
Day
Day
Day
Day
L.S.

0.24
2.75
0.90
0.08
0.08
14.30

287.00
247.00
260.00
800.00
300.00
1.49

Day

1.88

247.00
Total:
4730.56

Add water charges @ 1% on

Add C.P & OH @15% on

4777.87
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5494.55
Rs 5495.55

Item Code: 5.4

P/L up to floor five level RCC in kerbs, steps etc excluding centering, shuttering, finishing, reinforcement with 1:2:4 - coarse sand -20
mm stone aggrgt)
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
04.004.01 P/L C.C. in kerb at near ground level: 1 :2 :4 coarse sand, 20
1.00
4514.03
mm stone agg.
LABOUR:
Extra labour for laying CC in RCC work :
0114
(B) Beldar
Day
0.10
247.00
0101
(B) Bhishti
Day
0.20
260.00
0123
(B) Mason 1st class
Day
0.04
301.00
0124
(B) Mason 2nd class
Day
0.04
273.00
0128
(B) Mate
Day
0.04
260.00
0115
(B) Extra labour for lifting material upto floor V level
Coolie 2.5 x 0.75 = 1.88
Day
1.88
247.00
Total:
Add water charges @ 1% except on [A] i.e on
574.42
Add C.P & OH @15% except on [A] i.e on
580.16
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5181.21
Rs 5181.25

Item Code: 5.5

RCC work in arches, archribs, domes, etc upto floor 5 level with 1 : 2 : 4
Code
0295
0297
2202
0982
2203
0367
2209
0155
0114

DSR-12

Description
MATERIAL
Stone aggregate 20mm
Stone aggregate 10mm
Carriage of aggregate
Coarse sand
Carriage of coarse sand
Cement (0.02225/ cum)
Carriage of cement
LABOUR:
Mason
Beldar

Details of Cost for : 26.73 Cum

Unit
Quantity
cum
cum
cum
cum
cum
tonne
tonne
Day
Day

Rate

17.9091
5.8806
23.7897
11.8948
11.8948
8.5536
8.5536

1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87

6.42
73.51

287.00
247.00

Page 80 of 2298

0101
0002
0012
9999
0123
0124
0101
0115
0115

Bhishti
Mixer
Vibrator
Sundries
Extra for laying CC over curved surfaces
Mason 1st class
Mason 2nd class
Bhishti
Coolie
Extra labour for lifting material upto floor V level
Coolie (1.50x0.75x26.73)

Day
Day
Day
L.S.

24.06
2.14
2.14
401.89

260.00
800.00
300.00
1.49

Day
Day
Day
Day

5.00
5.00
1.50
4.50

301.00
273.00
260.00
247.00

Day

50.12

247.00
Total:
130820.47

Add water charges @ 1% on

Add C.P & OH @15% on

132128.67
Cost for 26.73 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5684.55
Rs 5684.55

Item Code: 5.6

RCC work in chimneys, shafts, upto floor five level with 1: 2: 4.
Code

05.002.03

0115

Description

Details of Cost for : 1.00 Cum

Unit
Quantity

MATERIALS :
R.C.C. 1:2:4 in.chimneys & shafts
RCC work in walls, columns, pillars, piers, etc. up to floor five
level excluding cost of
Extra labour involved for lifting materials :
(B) Coolie
Day

Rate

1.00

5344.82

0.26

247.00
Total:
64.22

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

64.86
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5419.41
Rs 5419.40

Item Code: 5.7

RCC work in well-steining with 1 : 2 : 4
Code

04.001.03

0115

Description

Details of Cost for : 1.00 Cum

Unit
Quantity

MATERIALS:
R.C.C. 1:2:4 in well steining
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
LABOUR.
Extra labour involved :
(B) Coolie
Day

Rate

1.00

4514.03

0.08

247.00
Total:
19.76

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

19.96
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

DSR-12

Rs 4536.98
Rs 4537.00

Page 81 of 2298

Item Code: 5.8

RCC work in vertical and horizontal fins up to floor five level excluding centering, shuttering, finishing and reinforcement with
1:1:3 - coarse sand - stone aggregate 20mm
Details of Cost for : 0.66 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
0295
Stone aggregate 20mm
cum
0.3762
1050.00
0297
Stone aggregate 10mm
cum
0.1848
1050.00
2202
Carraige of Stone aggregate below 40 mm nominal size
cum
0.561
87.60
0982
Coarse sand
cum
0.2805
1120.00
2203
Carraige of Coarse sand
cum
0.2805
87.60
0367
Cement
tonne
0.264
5000.00
2209
Carraige of Cement
tonne
0.264
77.87
LABOUR:
0114
Beldar
Day
0.79
247.00
0115
Coolie
Day
0.56
247.00
0101
Bhisthi
Day
0.60
260.00
0123
Mason I class
Day
0.06
301.00
0124
Mason II class
Day
0.06
273.00
9999
Scaffoldings
L.S.
30.16
1.49
9999
Sundries
L.S.
9.49
1.49
0002
Hire running charges of concrete mixer
Day
0.05
800.00
0012
Vibrator (Hire charges)
Day
0.05
300.00
Extra for lifting materials upto floor five level
0115
Coolie
Day
0.18
247.00
Extra for restricted working in fins
0123
0124
0114
0101

Mason I class
Mason II class
Beldar
Bhisthi

Day
Day
Day
Day

0.05
0.05
0.10
0.15

Add water charges @ 1% on

301.00
273.00
247.00
260.00
Total:
3092.31

Add C.P & OH @15% on

3123.23
Cost for 0.66 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5441.98
Rs 5442.00

Item Code: 5.9.1

Centering & shuttering including strutting, propping etc. - Foundations, footings, bases of columns, etc. for mass concrete.

Code

DSR-12

Details of Cost for : 10.80 Sqm

Description
Unit
Quantity
Assuming shuttering material will become unserviceable after
use of 40 times
Adding for maintenance @ 10% of cost
Taking salvage value after full use of material
@ 25% of cost

Rate

7319

Wall form panel

[Qty = 16 x (1+10%-25%) / 40 = 0.34]

each

0.34

1050.00

7326

Corner angle (1.5m long)

[Qty = 4 x (100+10-25)% / 40 = 0.085]

each

0.085

300.00

Page 82 of 2298

7327

100mm channel shoulder 2.5m long

[Qty = 8 x (100+10-25)% / 40 = 0.17

each

0.17

1160.00

7328

Bridge clip
[Qty = 16 x (100+10-25)% / 40 =0.34

each

0.34

97.00

7329

Single clip
[Qty = 8 x (100+10-25)% / 40 = 0.17

each

0.17

77.00

7330

MS tube 40mm
4x2.7m = 10.8m
[Qty = 10.8 x (100+10-25)% / 40 = 0.2295

metre

0.2295

280.00

9999

Assembly nuts & bolts

1040x0.85/40 = 22.10
L.S.

22.10

1.49

9999

Carriage
L.S.

78.00

1.49

0116
0114
9999

LABOUR:
Fitter grade-I
Beldar
Shuttering oil

Day
Day

0.75
1.50

301.00
247.00

9999

Sundries

L.S.
L.S.

52.00
26.00

1.49
1.49
Total:
1551.65

Add water charges @ 1% on

Add C.P & OH @15% on

1567.17
Cost for 10.80 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 166.88
Rs 166.90

Item Code: 5.9.2

Centering & shuttering including strutting, propping etc. - Walls including attached pilasters, butteresses, plinth and string courses
etc.
Details of Cost for : 15.80 Sqm
Code
Description
Unit
Quantity
Rate
Assuming shuttering material will become unserviceable after
use of 40 times
Adding for maintenance @ 10% of cost
Taking salvage value after full use of material
@ 25% of cost
7319

Wall form panel : 1250x500mm

Qty = 24x0.85/40 = 0.51
100mm channel shoulder 2.5m long
[Qty : 8x0.85/40 = 0.17]
Bridge clip
[Qty : 24x0.85/40 = 0.51]
Single clip
[ 2x3x2= 12 nos Qty : 12x0.85/40 = 0.255]

each

0.51

1050.00

each

0.17

1160.00

each

0.51

97.00

each

0.255

77.00

7330

MS tube 40mm
[2x2x8m = 32m - Qty : 32x0.85/40 = 0.68]

metre

0.68

280.00

9999

Nut & Bolts Qty : 1300x0.85/40 = 27.62

9999

Carriage

27.62
78.00

1.49
1.49

7327
7328
7329

DSR-12

L.S.
L.S.

Page 83 of 2298

0116
0114
9999

LABOUR:
Fitter grade-I
Beldar
Shuttering oil

9999

Sundries

Day
Day

3.50
6.00

301.00
247.00

L.S.
L.S.

78.00
52.00

1.49
1.49
Total:
3878.78

Add water charges @ 1% on

Add C.P & OH @15% on

3917.57
Cost for 15.80 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 285.14
Rs 285.15

Item Code: 5.9.3

Centering & shuttering including strutting, propping etc. - Suspended floors, roofs, landings, balconies and access platform

Code

Details of Cost for : 13.50 Sqm

Unit
Quantity

Description

Rate

MATERIALS :
Adding for maintenance @ 10% of cost
Taking salvage value after full use of material @ 25% of cost
1. Plates (size 0.75x0.60)
Angle 40x40x5mm
2x0.75= 1.50 m
2x0.60= 1.20 m
= 2.70 m @ 3.00 kg/m = 8.10 kg
sheet 1.6 mm thick
0.75x0.60 = 0.45 sqm
0.45 sqm @ 12.55kg/sqm = 5.65kg
Weight of one plate = 13.75kg
Add for wastage @ 5% = 0.69 kg
Total = 14.44kg
Total weight of all plates = 5x6x14.44 = 433.20 kg.
Qty taken for cost using once = 433.2x0.85/40 = 9.2055 kg.
10.001
7342
7343
9999
9999
0116
0114
9999
9999

Structural steel work in single section fixed with or without

connecting plate including a
2. Adjustable span- ESOSI (2.35-3.40m)
each
Qty taken for cost using once = 5x0.85/40 = 0.1063
3. Adjustable telescopi prop 3m(2.02-3.75m)
each
Qty taken for cost using once = 6x0.85/40 = 0.1275
4. Assembly nut & bolts etc.
L.S.
Qty taken for cost using once = 1040x0.85/40 = 22.1
Carriage
L.S.
LABOUR:
Fitter grade-I
Day
Beldar
Day
Shuttering oil
L.S.
Sundries, paper tape etc
L.S.

9.2055

59.90

0.1063

1825.00

0.1275

1150.00

22.10

1.49

130.00

1.49

3.00
6.00
78.00
49.70

301.00
247.00
1.49
1.49
Total:
3142.53

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

3173.96
Cost for 13.50 Sqm
Rate per One Sqm:

DSR-12

Rs 311.22

Page 84 of 2298

Rate as per DSR-12:

Rs 311.20

Item Code: 5.9.4

Centering & shuttering including strutting, propping etc. - Shelves (Cast in situ)
Details of Cost for : 13.50 Sqm
Code
Description
Unit
Quantity
MATERIALS:
Adding for maintenance @ 10% of cost
Taking salvage value after full use of material
@ 25% of cost
1. Plates (size 0.75 x 0.60)
Angle 40x40x5mm
2x0.75= 1.50 m
2x0.60 = 1.20 m
= 2.70 m @ 3.00 kg/m = 8.1 kg
sheet 1.6 mm thick
0.75x0.60 = 0.45 sqm
0.45 sqm @ 12.55kg/sqm = 5.65kg
Weight of one plate = 13.75kg
Add for wastage @ 5% = 0.69 kg
Total = 14.44kg
Total weight of all plates = 5x6x14.44 = 433.20 kg.
Qty taken for cost using once = 433.2x0.85/40
= 9.2055 kg.
10.001
Structural steel work in single section fixed with or without
9.2055
connecting plate including a
7342
2. Adjustable span- ESOSI (2.35-3.40m)
each
0.1063
Qty taken for cost using once = 5x0.85/40 = 0.1063
7343
3. Adjustable telescopi prop 3m(2.02-3.75m)
each
0.1275
Qty taken for cost using once = 6x0.85/40 = 0.1275
9999
4. Assembly nut & bolts etc.
L.S.
22.10
Qty taken for cost using once = 1040x0.85/40 = 22.1
9999
Carriage
L.S.
130.00
LABOUR:
0116
Fitter grade-I
Day
3.00
0114
Beldar
Day
6.00
9999
Shuttering oil
L.S.
78.00
9999
Sundries,paper tape etc
L.S.
49.70
Add water charges @ 1% except on [A] i.e on

Rate

59.90
1825.00
1150.00
1.49
1.49
301.00
247.00
1.49
1.49
Total:
3142.53

Add C.P & OH @15% except on [A] i.e on

3173.96
Cost for 13.50 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 311.22
Rs 311.20

Item Code: 5.9.5

Centering & shuttering including strutting, propping etc. - Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Code

Description

Details of Cost for : 7.80 Sqm

Unit
Quantity

Rate

MATERIALS :
Assuming shuttering will become unserviceable after use of
40 times
Add maintenance charges @ 10% of cost of material
Less salvage value of material after full use @ 25% of cost of
material

DSR-12

Page 85 of 2298

1. Steel plates for side and bottom (plate size 1.20 x 0.50m)
Angle 40x40x5mm
2x1.20 = 2.40 m ^
3x0.50= 1.50 m
Total 3.90 m @ 3.00 kg/m = 11.70 kg
sheet 1.6 mm thick
1.20m x 0.50 m= 0.60 sqm.
0.60 sqm @ 12.55 kg/sqm. = 7.53 kg.
Weight of one plate = 19.23 kg. -
Add for wasdge 5% 0.96 kg.
Total =20.19 Kg.
Total weight of all plates
3x5x20.19 = 302.85 kg or 3.03 q
Qty taken for cost of using once = 302.85 x 85/40 = 6.4356 kg.
10.001
7343
7344
9999
9999
0116
0114
9999
9999

Structural steel work in single section fixed with or without

connecting plate including a
(ii) Props 3m (adjustable telescopic 2.02 - 3.75m)
Qty taken for cost of using once = 6x0.85/40 = 0.1275 m
(iii) Beam clamp 300-380 mm(450-1070mm)
Qty taken for cost of using once = 5/0.85/40 = 0.1063 m
(iv) Assembly nut & bolts etc.
Qty taken for cost of using once = 1040x0.85/40 = 22.10
Carriage
LABOUR:
Fitter Grade-I
Beldar
Shuttering oil
Sundries, paper tape etc.

6.4356

59.90

each

0.1275

1150.00

each

0.1063

422.00

L.S.

22.10

1.49

L.S.

78.00

1.49

Day
Day
L.S.
L.S.

1.25
2.50
39.00
24.39

301.00
247.00
1.49
1.49
Total:
1428.84

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

1443.13
Cost for 7.80 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 262.19
Rs 262.25

Item Code: 5.9.6

Centering & shuttering including strutting, propping etc. - Columns, Pillars, Piers, Abutments, Posts and Struts.

Code

Description

Details of Cost for : 4.50 Sqm

Unit
Quantity

Rate

MATERIALS:
Assuming shuttering will become
unserviceable after use of 40 times
Add maintenance charges @ 10% of cost of
material
Less salvage value of material after full use @ 25% of cost of
material
7331
7332

7333

DSR-12

Wall form panel

(Qty : for using once = 8x0.85/40 = 0.17)
Corner angle 2.5m long
(Qty : 4x0.85/40 = 0.085)

each

0.17

1040.00

each

0.085

340.00

Column clamp (450-1070 mm)

(Qty : 5x0.85/40 = 0.1063)

each

0.1063

1220.00

Page 86 of 2298

7334

Prop 2m (2.0 - 3.50 m)

(Qty : 4x0.85/40 = 0.085)

9999

Assembly nut & bolt

Qty taken for cost of using once =
1300x0.85/40 = 27.62

9999

Carriage

0116
0114
9999

Fitter grade-I
LABOUR:
Beldar
Shuttering oil

9999

Sundries

each

0.085

830.00

L.S.

27.62

1.49

L.S.
Day

52.00
1.00

1.49
301.00

Day

2.00

247.00

L.S.
L.S.

39.00
26.00

1.49
1.49
Total:
1416.42

Add water charges @ 1% on

Add C.P & OH @15% on

1430.58
Cost for 4.50 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 365.59
Rs 365.60

Item Code: 5.9.7

Centering & shuttering including strutting, propping etc. - Stairs, (excluding landings) except spiral-staircases.

Code

1198

1197

0302

2204

DSR-12

Description
MATERIAL:
(i) Cost of plank 38mm (2nd class kail wood)
Waist 2.69x1.30 = 3.50sqm.
Side shuttering of steps and side of waist-Steps
= 8x1.30x1.15= 1.56 sqm.
Face of landing
1x1.30x0.15 = 0.20 sqm.
Side of waist 2.69x0.13 =0.35 sqm.
Side of steps- 8x0.50x0.30x0.15 = 0.18sqm.
Total = 5.79 sqm.
Wastage 5% = 0.29sqm.
Total = 6.08 sq.
Cubical content6.08x0.038 = 0.231 cum = 231 dm3
Qty taken for cost using once = 231/8= 28.875
(ii) Batten 100mm x 75mm
(2nd class kail wood in scantling)
4x1.30x0.100x0.075=0.039 cum = 39 dm3
Qty taken for cost using once = 39/8 = 4.875
(iii) Safeda Bailies 125mm dia.
2x4x0.80 = 6.40m
Qty taken for cost using once = 6.4/8 = 0.8 m
Carriage of timberPlanks = 0.231 cum.
Battens = 0.039 cum.
Bailies 6.4x3.142/4x(0.125) = 0.079cum.
Total =0.349 cum.
Qty taken for cost using once = 0.349/8 =
0.04363 cum

Details of Cost for : 5.79 Sqm

Unit
Quantity

Rate

cum

0.02888

25000.00

cum

0.00487

25000.00

0.80

37.00

0.04363

100.11

metre

cum

Page 87 of 2298

0112
0114
9999

LABOUR:
For assembling, erection, dismantling and cleaning
Carpenter 2nd class
Beldar
Sundries

Day
Day
L.S.

1.75
1.00
16.12

Add water charges @ 1% on

273.00
247.00
1.49
Total:
1626.49

Add C.P & OH @15% on

1642.75
Cost for 5.79 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 326.28
Rs 326.30

Item Code: 5.9.8

C/S i/c strutting, propping etc at all level Spiral staircases
Code

05.009.05

05.009.02

05.009.07

Details of Cost for : 6.28 Sqm

Description
Unit
Quantity
Detail of cost for 6.28 sqm (For 10 steps)
Treads
Centering & shuttering including strutting, propping etc. 1.40
Lintels, beams, plinth beams,
(Rate as per item no 5.9.5)
Riser
Centering & shuttering including strutting, propping etc. 3.22
Walls including attached pilas
(Rate as per item no 5.9.2)
Newal Post (Column)
10x3.14x0.232 = 1.66 sqm
Centering & shuttering including strutting, propping etc. 1.66
Stairs, (excluding landings) e
Add water charges @ 1% except on [A]+[B]+[C] i.e on

Rate

262.19

285.14

326.28
Total:
0.00

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

0.00
Cost for 6.28 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 290.90
Rs 290.90

Item Code: 5.9.9

C/S i/c strutting, propping etc at all level Arches, domes etc
Code

DSR-12

Details of Cost for : 20.37 Sqm

Description
Unit
Quantity
Details of cost for a semicircular arch 3.6m clear span and
3.6m long.
Area of centering = 22x1.8x3.6=20.37sqm.
MATERIAL:
Frame work in 2nd class kail wood
Tie-1x3.6x0.15x0.20 = 0.108cum.
Struts-3xl.8x0.10x0.10 =0.054cum
Struts-2x2.55x0.10x0.10=0.051 cum.
Ribs-4xl.38x.075x0.075=0.031cum.
Total = 0.244 cum.
Quantity for 7 such frames
7x0.244 =1.708cum.
Strips 5cmx2.5cm = 7.5cm center to center
5.66/0.075x0.05x0.025x3.6 = 0.342cum.

Rate

Page 88 of 2298

1197

0302
0992

2204
2302
0112
0114
9999

Total = 2.050 cum = 2050 cudm

Qty taken for cost using once = 2050/8 = 256.25 cudm
Safeda Balli supports 12.5cm dia
7x4x3.6= 100.8m
Qty taken for cost using once = 100.8/8 = 12.6
in G.I. Plain sheet 20.37 sqm = 116kg. Or 1.16 quintal
Qty taken for cost using once =1.16/8 = 0.145 qtl
CarriageKail wood = 2.05cum.
Bailies- 100.8x(. 125) /4x3.142 = 1.24cum.
Total = 3.29 cum.Qty taken for cost using once = 3.29/8 = 0.4112 cum
G.I. Sheet = 0.116 t
Qty taken for cost using once = 0.116/8 = 0.0145 t
LABOUR:
Carpenter Ilnd class
Beldar
Sundries

cum

0.25625

25000.00

metre

12.60

37.00

quint

0.145

4750.00

cum

0.4112

100.11

tonne

0.0145

77.87

16.00
13.00
11.70

273.00
247.00
1.49
Total:
15199.93

Day
Day
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

15351.93
Cost for 20.37 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 866.70
Rs 866.70

Item Code: 5.9.10

C/S i/c strutting, propping etc at all level Extra for arches, domes etc exceeding 6 metre span
Details of Cost for : 33.31 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost per 33.31 sqm.
Centering and shuttering for arches and carved surface
exceeding 6m in span (an average of 8m)
Radius R = 5m 2R-2=4+4
Arctan ( 4/3 ) = 53.28
2x53.2 = 106
Surface area
=2x22/7x5x3.6x106/360=33.3lsqm.
Arc=9.25m
MATERIAL:
Tie-2x8xO. 18x0.05 =0.144cum
Struts-2x2.5x0.1x0.1 =0.050cum.
Struts-2xl .77x0.1 xO. 1 =0.035cum.
Ribs-6x 1.54x0.23x0.1 =0.213cum.
Struts-2x 1.72x0.1 xO. 1 =0.034cum.
Total=0.476cum.
For four such frames
=0.476x4= 1.904 cum.
laggings-75x3.6x0.125x0.075=2.531cum.
Tie-2x3.6xO.225xO.O38=O.O62cum.
Brace-3x2x2.14x0.225x0.038=0.110cum
Brace-3x4x3.8x0.225x0.038=0.390 cum
Sleepers-4x3.6x0.20x0.15=0.432 cum
Sleepers-2x4x3.6xO. 175x0.075=0.378
Vertical post-4x4x-3.6x0.15x0.15=1.296
Total =7.103cum. or 7103 cudm
1197
Qty taken l/8th of qty for cost using once =
cum
0.8879
25000.00
7.103/8 = cum = 887.9 Cudm

DSR-12

Page 89 of 2298

2204

1225

1034

2302

0112
0114
9999

05.009.09

Carriage of wood
Fittings:
3 way straps 50mmxl 0mm = 32 Nos.
32 no. @0.50cm each = 16m
Straps-50mmxl0mm = 8 Nos. @0.25cm each = 2m
= 18m
18m, wt @ 3.9kg/m = 70.2 kg. = 0.702q
Qty taken l/8th of qty for cost using once =
0.702/8 = 0.08775
Bolts 160 Nos. 254 mm long 16mm dia.160x.254x 1.58=64.21 kg=0.64q. s
Qty taken l/8th of qty for cost using once = 0.64/8 = 0.08
Carriage of steel = 0.1342t
Qty taken l/8th of qty for cost using once =
0.1342/8 = 0.01677 cum
LABOUR:
Carpenter 2nd class
Beldar
Sundries
Less Cost of shuttering etc. for an arch exceeding 6 m span i.e.
for an average of 8 m span
C/S i/c strutting, propping etc at all level Arches, domes etc

cum

0.8879

100.11

quint

0.0878

3950.00

quint

0.08

5400.00

tonne

0.0168

77.87

Day
Day
L.S.

28.00
24.00
134.55

273.00
247.00
1.49

-33.31

866.70

Add water charges @ 1% except on [A] i.e on

Total:
36838.99

Add C.P & OH @15% except on [A] i.e on

37207.38
Cost for 33.31 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 417.85
Rs 417.85

Item Code: 5.9.11

C/S i/c strutting, propping etc at all level Chimneys and shafts.
Code

7319
7327
7328
7329
7330
9999

9999
0116
0114

DSR-12

Details of Cost for : 15.80 Sqm

Description
Unit
Quantity
Details for 7.9m long and 1.00m high wall Area of contact
2x7.9x1.0 = 15.8 sqm.
MATERIALS :
Adding for maintenance @ 10% of cost
Taking salvage value after full use of material @ 25% of cost
Wall form Panel (1.25x0.5) 2x3x2x2 = 24 Nos.
Qty taken for cost of using once = 24x0.85/40 = 0.51
100 mm channel shoulder 2.5m long, 4x2 = 8
Qty taken for cost of using once = 8x0.85/40=
Bridge clip 2x6x2 = 24
Qty taken for cost of using once = 24x0.85/40 = 0.51
Single clip 2x3x2 = 12
Qty taken for cost of using once = 12x0.85/40 = 0.255
M.S. Tube 40mm 2x2x8m = 32m
Qty taken for cost of using once = 32x0.85/40 = 0.68
Nut & Bolts
Qty taken for cost of using once =
1300x0.85/40= 27.63
Carriage
LABOUR:
Fitter Grade-I
Beldar

Rate

each

0.51

1050.00

each

0.17

1160.00

each

0.51

97.00

each

0.255

77.00

metre

0.68

280.00

L.S.

27.63

1.49

L.S.

78.00

1.49

Day
Day

3.50
6.00

301.00
247.00

Page 90 of 2298

9999
9999

Shuttering oil
Sundries

L.S.
L.S.

78.00
52.00

Add water charges @ 1% on

1.49
1.49
Total:
3878.80

Add C.P & OH @15% on

3917.59
Cost for 15.80 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 285.14
Rs 285.15

Item Code: 5.9.12

C/S i/c strutting, propping etc at all level Well steining.
Details of Cost for : 26.39 Sqm
Code
Description
Unit
Quantity
05.009.12-A Cost of centring and shuttering materials for using once in times
1.00
item 5.9.12 - well steining
05.009.12-A Cost of centring and shuttering materials for using once in times
0.16667
item 5.9.12 - well steining
Add water charges @ 1% on

Rate
3995.63
3995.63
Total:
4661.58

Add C.P & OH @15% on

4708.20
Cost for 26.39 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 205.17
Rs 205.15

Item Code: 5.9.13

Centering & shuttering including strutting, propping etc. - Vertical and horizontal fins individually or forming box louvers band,
facias and eaves boards.
Details of Cost for : 23.90 Sqm
(In DAR wrongly taken as 25.1)
Code
Description
Unit
Quantity
Rate
Details of cost for fins 4 vertical fins 4 metre
high and at 1 metre centres, with two
horizontal fins all projecting 60cm from face
of wall and 5 cm thicki.e.4x4x1.215+2x3x0.65=23.90 sqm
Materials :
(i) Planks 2nd class kail wood 38mm
thick4x4x1.25=20.00
23x0.65 =3.90
= 23.90
Wastage @ 5% = 1.20
= 25.10sqm.
25.10x0.038=.954 cum or 954 cudm
1198
Qty for cost using once = 954/8 = 119.25 cudm
cum
0.11925
25000.00
(ii) Battens (2nd class kail wood)4x2x5x0.60x0.075x0.050=0.090
3x2x5x1.00x0.075x0.050=0.112
2x6x0.60x0.075x0.100=0.054
= 0.256 Cum.
Wastage 5% =0.013 cum
= 0.269 cum= 269 cudm
1197
Qty for cost using once = 269/8 = 33.625 cudm
cum
0.03363
25000.00
(iii) Safeda Bailies 125mm dia-

DSR-12

Page 91 of 2298

0302

2204

0112
0114
9999

2x2x6x4.00 =96m
Wastage @5% = 4.8m
= 100.8 m
Qty for cost using once = 100.8/8 = 12.6 m
(iv) Carriage timberPlanks = 0.954
Battens = 0.269
Bailies 100.8x(.125)^2 /4x3.142=1.238cum.
= 2.461 cum
Qty for cost using once = 2.461/8 = 0.3076 cum
Labour:
For assembling, erection, dismantling and
cleaning
Carpenter 2nd class
Beldar
Sundries

metre

12.60

37.00

cum

0.3076

100.11

Day
Day
L.S.

11.00
11.00
80.73

273.00
247.00
1.49
Total:
10159.28

Add water charges @ 1% on

Add C.P & OH @15% on

10260.87
Cost for 23.90 Sqm
(In DAR2012 rongly taken as 25.1)
Rate per One Sqm:
Rs 493.72
Rate as per DSR-12:
Rs 470.10

Item Code: 5.9.15

Centering and shuttering .. .. : Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses,
bands, copings, bed plates, anchor blocks etc
Details of Cost for : 10.80 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for footing size
2.7mx2.7mxl.00m
Contact area = 10.8 sqm.
Assuming shuttering material will become unserviceable after
use of 40 times
Adding for maintenance @ 10% of cost
Taking salvage value after full use of material @ 25% of cost
7319

7326
7327
7328
7329
7330

9999

9999
0116
0114

DSR-12

Wall form panel 1250x500 mm

Qty taken for cost of using once = 16x0.85/40
= 0.34
Corner angle 45x45x5 mm 1.50 m long
Qty taken for cost of using once = 4x0.85/40 = 0.085
100 mm channel shoulder 2.5 m long
Qty taken for cost of using once = 8x0.85/40 = 0.17
Double clip ( bridge clip)
Qty taken for cost of using once = 16x0.85/40 = 0.34
Single clip
Qty taken for cost of using once = 8x0.85/40 = 0.17
M.S. tube 40 mm dia
Qty taken for cost of using once =
10.8x0.85/40 =0.2295
Assembly nuts & bolts
Qty taken for cost of using once =
1040x0.85/40 = 22.10
Carriage
LABOUR:
Fitter (grade 1)
Beldar

each

0.34

1050.00

each

0.085

300.00

each

0.17

1160.00

each

0.34

97.00

each

0.17

77.00

0.2295

280.00

L.S.

22.10

1.49

L.S.

78.00

1.49

Day
Day

0.75
1.50

301.00
247.00

metre

Page 92 of 2298

9999
9999

Shuttering oil
Sundries

L.S.
L.S.

52.00
26.00

Add water charges @ 1% on

1.49
1.49
Total:
1551.65

Add C.P & OH @15% on

1567.17
Cost for 10.80 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 166.88
Rs 166.90

Item Code: 5.9.16.1

Centering & shuttering including strutting, propping etc. - Edges of slabs - under 20cm wide
Details of Cost for : 12.00 m
Code
Description
Unit
Quantity
Assuming that the timber will become unserviceable after
being used 8 times.
(i) Planks 30mm thick (2nd class Kail wood or equivalent local
soft wood)
4x3x0.15x0.030=0.054cum
1198
Wastage @5% = 0.003 cum.
cum
0.00712
Total = 0.057 cum 57 cudm
Qty taken for cost of using once = 57/8 = 7.125 cudm
(ii) Battens 75mmxl00mm (2nd class Kail wood)
Horizontal 2x4x0.075x0.1x0.5=0.030
Horizontal 2x4x0.075x0.1 x 1.5=0.090
(iii) Vertical battens
16x0.15x0.075x0.030M=O.0054
(iv) Struts
16x0.25x0.075x0.075=0.0225
Total = 0.1479\"
Wastage @5% =0.0074
Total = 0.1553 cum= 155 cudm
1197
Qty taken for cost ef using once = 155/8 =
cum
0.01938
19.375 cudm
Carriage of timber
Planks = 0.057 cum.
Battens = 0.155 cum.
Total = 0.212 cum.
2204
Qty taken for cost of using once = 0.212/8 = 0.0265 cum
cum
0.0265
LABOUR:
For assembling erection dismantling &
cleaning.
0112
Carpenter Ilnd class
Day
0.81
0114
Mazdoor (Male)
Day
0.54
9999
Sundries
L.S.
5.20
Add water charges @ 1% on

Rate

25000.00

25000.00

100.11

273.00
247.00
1.49
Total:
1027.41

Add C.P & OH @15% on

1037.68
Cost for 12.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 99.44
Rs 99.45

Item Code: 5.9.16.2

C/S i/c strutting, propping etc at all level Edges of slabs and breaks in floors and walls Above 20 cm wide
Details of Cost for : 4.00 Sqm

DSR-12

Page 93 of 2298

Code

1198

1197

2204

0112
0114
9999

Description
Consider a 4mx4xslab 25cms thick 16 metre edge length
MATERIALS :
(i) Planks 38mm thick
4x4x0.25x0.038 = 0.152
Wastage @ 5% = 0.008
Total = 0.160 cum. = 160 cudm
Qty taken for cost of using once = 160/8 = 20 cudm
(ii) Battens
6x2x0.6 x0.075x0.100=0.054
5x2x1.5x0.075x0.100=0.113
Total =0.167
Wastage @ 5% = 0.008
Total =0.175 cum. = 175 cudm
Qty taken for cost of using once = 175/8 =
21.88 cudm
Carriage of timber
Planks = 0.16 cum.
Battens = 0.175 cum.
Total = 0.335 cum.
Qty taken for cost of using once = 0.335/8 =
0.0419 cum
LABOURFor assembling erection dismantling & cleaning.
Carpenter Ilnd class
Mazdoor (Male)
Sundries

Unit

Quantity

Rate

cum

0.02

25000.00

cum

0.02188

25000.00

cum

0.0419

100.11

Day
Day
L.S.

1.00
0.75
6.50

273.00
247.00
1.49
Total:
1519.13

Add water charges @ 1% on

Add C.P & OH @15% on

1534.32
Cost for 4.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 441.12
Rs 441.10

Item Code: 5.9.17

C/S i/c strutting, propping etc at all level Cornices and mouldings
Code

1198

1197

DSR-12

Details of Cost for : 4.00 Sqm

Description
Unit
Quantity
Details of cost for 10m long moulding 10cm projection, 20cm
depth and 40cm girth Area in contact 10x0.40 = 4.00 sqm.
Assuming that the timber will become unserviceable after
being used 8 times.
(I) Planking 30mm thick = 4sqm.
Extra & Wastage 20% = 0.8 sqm.
Total = 4.8 sqm.
4.8x0.038 = 0.182 cum = 182 cudm
Qty taken for cost using once = 182/8 = 22.75
cum
(ii) Battens-Joining to Planking
1x10x0.1x0.075 = 0.075 cum.
From bottom shuttering
10xl.5x0.lx0.075 = 0.113 cum.
Wales
10x0.4mx0.1x0.075 = 0.030 cum.
Total = 0.218 cum = 218 cudm
Qty taken for cost using once = 218/8 = 27.25
cum
cudm

Rate

0.02275

25000.00

0.02725

25000.00

Page 94 of 2298

2447

2204
0112
0114
9999

(iii) Bailies 125 mm dia.

Slant 10x0.3 =3.00 m
ver. 6x3.5 = 21.00m
Total = 24.00 m
Wastage @ 5% = 1.20 m
Total = 25.20 m
Qty taken for cost using once = 25.2/8 = 3.15M
Carriage:
Planking = 0.188 cum.
Battens & Wales = 0.218 cum.
Bailies
25.2x22/7x(0.125) /4 = 0.310 cum.
Total = 0.710 cum.
Qty taken for cost using once = 0.71/8= 0.0888 cum
Labour for assembling, erection, dismantling & cleaning
Carpenter Ilnd class
Mazdoor (Male)
Sundries

metre

3.15

35.00

cum

0.0888

100.11

Day
Day
L.S.

0.63
0.63
6.50

273.00
247.00
1.49
Total:
1706.43

Add water charges @ 1% on

Add C.P & OH @15% on

1723.49
Cost for 4.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 495.50
Rs 495.50

Item Code: 5.9.18

C/S i/c strutting, propping etc at all level Small surfaces such as canti- lever ends, brackets etc
Details of Cost for : 2.525 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for a bracket
1.20m projected
Front area 0.50x0.60m
End area 0.50x0.75m
Area in contact with concrete
2x,(0.60+0.75)/2x1.2-= 1.62 Sqm
Front 0.5x0.6 = 0.30 sqm.
Bottom 0.5x1.21 = 0.605 sqm.
Total = 2.525 sqm.
MATERIALS:
Assuming that the timber will become unserviceable after
being used 8 times.
Timber Ilnd class kail wood or equivalent
local soft wood
(I) Plank 30mm thick.
Sides 2{(0.60\"0.75)/2xl.238} = 1.6713 sqm
Battens 0.576x1.21 =0.697
Front 0.5x0.638 =0.319
Total = 2.687 sqm.
Cubical contents
2.687x0.038 =0.102 cum.
Wastage @ 5% = 0.005 cum.
Total =0.107 cum.
1198
Qty taken for cost using once = 107/8 =
cum
0.01338
25000.00
(ii) Battens-0.05x0.05
2x1.238 = 2.476m
2x1.21 = 2.42m
2x0.688 = 1.376m

DSR-12

Page 95 of 2298

1197

2447

2204
0112
0114
9999

2x0.838 = 1.676m
3x0.5 = 1.50m
Total = 9.448m
Cubical contents
9.448x0.05x0.05 = 0.024 cum
Wastage 5% = 0.0012 cum.
Total = 0.0252 cum = 25.2 cudm
Qty taken for cost using once = 25.2/8 = 3.15 cudm
(iii) Bailies 125mm dia.
1x2.5 = 2.50m
1x2.65 = 2.65m
Total = 5.15 m
Wastage 5% = 0.26m
Total =5.41 m
Qty taken for cost using once = 5.41/8= 0.6763 m
Carriage:
Planks =0.107 cum.
Battens = 0.0252 cum
Bailies
5.41x22/7x(0.125) /4 = 0.066 cum
Total = 0.198 cum
Qty taken for cost using once = 0.198/8
Labour for assembling, erection, dismantling & cleaning
Carpenter Ilnd class
Mazdoor (Male)
Sundries

cum

0.00315

25000.00

metre

0.6763

35.00

cum

0.0248

100.11

Day
Day
L.S.

0.80
0.80
7.15

273.00
247.00
1.49
Total:
866.05

Add water charges @ 1% on

Add C.P & OH @15% on

874.71
Cost for 2.525 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 398.38
Rs 398.35

Item Code: 5.9.19

Centering & shuttering including strutting, propping etc. - Weather shade, Chajjas, corbels etc., including edges.

Code

1198

DSR-12

Description

Details of Cost for : 0.954 Sqm

Unit
Quantity

MATERIALS :
Assuming that the timber will become unserviceable after
being used 8 times.
Ilnd class kail wood
(i) Planking 38mm thick.
Bottom 1x1.876x0.488 = 0.915 sqm.
1x1.876x0.05 =0.94 sqm.
2x0.45x0.06 = 0.027 sqm.
Total =1.036 sqm.
Add 5% wastage = 0.052 sqm.
Total = 1.088 sqm.
Cubic contains
1.088x0.038 =0.041 cum = 41 cudm
Qty taken for cost using once = 41/8 = 5.125
cum
(ii) Battens2x0.60x0.075x0.10 = 0.009
Ends with bearing center
1x0.45x0.075x0.10 = 0.003
Total = 0.012 cum = 12 cudm

0.005125

Rate

25000.00

Page 96 of 2298

1197

2447

2204
0112
0114
9999

Qty taken for cost using once =12/8=1.50

(iii) Bailies 125mm dia.
2x2.1 =4.2m
Wastage 5% = 0.21m
Total = 4.41 m
Qty taken for cost using once = 4.41/8 = 0.5513 m
Carriage:
Plank = 0.041 cum.
Battens = 0.012 cum.
Bailies
4.41x22/7x(0.125) /4 = 0.054 cum.
Total = 0.107 cum
Qty taken for cost using once = 0.107/8 = 0.01338 cum
Labour for assembling, erection, dismantling & cleaning
Carpenter II class
Mazdoor (Male)
Sundries

cum

0.0015

25000.00

metre

0.5513

35.00

cum

0.01338

100.11

Day
Day
L.S.

0.30
0.25
5.20

273.00
247.00
1.49
Total:
337.67

Add water charges @ 1% on

Add C.P & OH @15% on

341.05
Cost for 0.954 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 411.12
Rs 411.10

Item Code: 5.9.20

C/S i/c strutting, propping etc at all level suspended floors etc with 12 mm water proof ply
Details of Cost for : 13.50 Sqm
Code
Description
Unit
Quantity
MATERIALS:
Adding for maintenance @ 10% of cost
Taking salvage value after full use of material @ 25% of cost

10.001
8659

7342
7343
9999
9999
0116

DSR-12

1. Plates (size 0.75x0.60)

Angle 40x40x5mm
2x0.75= 1.50 m
2x0.60= 1.20 m
= [email protected]/m = 8.I kg
Weight of one plate =8.1 Okg
Add for wastage @ 5% = 0.41 kg
Total = 8.51kg
Total weight of all plates = 5x6x8.51 = 255.30 kg
Qty taken for cost using once.= 255.30x0.85/8
= 27.13kg
Structural steel work in single section fixed with or without
connecting plate including a
Water proof ply 12mm thick.
sqm
1x4.50x3.00=13.50sqm Add wastage 5% =0.68sqm
Total 14.18sqm
Qty taken for cost using once 14.18/8 = 1.77sqm
2. Adjustable span- ESOSI (2.35-3.40m)
each
Qty taken for cost using once = 5x0.85/40 = 0.531
3. Adjustable telescope prop 3m(2.02-3.75m)
each
Qty taken for cost using once = 6xO.85/40 0.6375
4. Assembly nut & bolts etc.
L.S.
Carriage
L.S.
LABOUR:
Fitter grade-I
Day

Rate

27.13

59.90

1.77

645.00

0.1063

1825.00

0.1275

1150.00

12.63
130.00

1.49
1.49

3.00

301.00

Page 97 of 2298

0114
9999
9999

Beldar
Shuttering oil
Sundries

Day
L.S.
L.S.

6.00
78.00
52.00

Add water charges @ 1% except on [A] i.e on

247.00
1.49
1.49
Total:
4273.50

Add C.P & OH @15% except on [A] i.e on

4316.24
Cost for 13.50 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 488.06
Rs 488.05

Item Code: 5.9.21

C/S i/c strutting, propping etc at all level lintel, beams etc with 12 mm water proof ply
Details of Cost for : 7.80 Sqm
Code
Description
Unit
Quantity
MATERIALS:
Assuming shuttering will become
unserviceable after use of 8 times
Add maintenance charges @ 10% of cost of
material
Less salvage value of material after full use @
25% of cost of material
1. Steel plates for side and bottom (plate size
1.20 x 0.50m)
Angle 40x40x5mm
2x1.20 = 2.40 m
3x0.50= 1.50 m
3.90 m @ 3.00 kg/m = 11.70 kg
Weight of one plate = 11.70 kg.
Add for wastage = 0.585kg.
Total =12.285 kg.
Total weight of all plates
3x5x12.285 = 184.275 kg
Qty taken for cost of using once =
184.275*x0.85/8 =19.58 kg
10.001
8659

7343
7344

9999
9999
0116
0114
9999
9999

Structural steel work in single section fixed with or without Kg

connecting plate including a
Water proof ply 12mm thick, 1x1.30x6.00 =
7.80 sqm Add 5% wastage 0.39 sqm
Total 8.19 sq
sqm
(ii) Adjustable telescopic prop 3 m (2.02-3.75 m)
Qty taken for cost of using once =6x0
each
(iii) Beam clamp 300-380 mm(450-1070mm)
Qty taken for cost of using once = 5x0.85/40
=
each
(iv) Assembly nut & bolts etc.
L.S.
Carriage
L.S.
LABOUR :
Fitter (grade 1)
Day
Beldar
Day
Shuttering oil
L.S.
Sundries, paper tape etc.
L.S.

19.58

59.90

1.02

645.00

0.1275

1150.00

0.1063

422.00

11.05
78.00

1.49
1.49

1.25
2.50

301.00
247.00

39.00

1.49

26.00

1.49
Total:
2072.67

Add water charges @ 1% except on [A] i.e on

DSR-12

Rate

Page 98 of 2298

Add C.P & OH @15% except on [A] i.e on

2093.40
Cost for 7.80 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 459.01
Rs 459.00

Item Code: 5.10.1

P/F tie bolt, spring, plastic cone in wall shuttering. 12 mm dia & 100 mm length.
Details of Cost for : 24.00 sets
Code
Description
Unit
Quantity
Details of cost for wall length 7.90mxlm (24 set)
MATERIAL:
7320
Tie bolt 12mm dia & 100 mm length
each
24.00
7324
Spring Coil 12mm dia.
each
48.00
7325
Plastic cone 12mm dia.
each
48.00
9999
Carriage:
L.S.
13.00
LABOUR :
9999
Sundries
L.S.
26.00
Add water charges @ 1% on

Rate

38.00
16.00
18.00
1.49
1.49
Total:
2602.11

Add C.P & OH @15% on

2628.13
Cost for 24.00 sets
Rate per Each Set:
Rate as per DSR-12:

Rs 125.93
Rs 125.95

Item Code: 5.10.2

P/F tie bolt, spring, plastic cone in wall shuttering. 12 mm dia & 150 mm length
Details of Cost for : 24.00 sets
Code
Description
Unit
Quantity
Details of cost for wall length 7.90mxlm (24
set)
Material:
7321
Tie bolt 12 mm dia 150 mm length
each
24.00
7324
spring coil 12 mm dia
each
48.00
7325
Plastic cone 12mm dia.
each
48.00
9999
Carriage:
L.S.
13.00
Labour:
9999
Sundries
L.S.
26.00
Add water charges @ 1% on

Rate

50.00
16.00
18.00
1.49
1.49
Total:
2890.11

Add C.P & OH @15% on

2919.01
Cost for 24.00 sets
Rate per Each Set:
Rate as per DSR-12:

Rs 139.87
Rs 139.85

Item Code: 5.10.3

P/F tie bolt, spring, plastic cone in wall shuttering. 20 mm dia & 150 mm length.
Details of Cost for : 24.00 sets
Code
Description
Unit
Quantity
Details of cost for wall length 7.90mxlm (24 set)
MATERIAL:
7322
Tie bolt 20mm ida & 150mm length
each
24.00

DSR-12

Rate

62.00

Page 99 of 2298

7324
7325
9999
9999

Spring coil 12 mm dia

Plastic cone 12 mm dia
Carriage:
LABOUR:
Sundries

each
each
L.S.

48.00
48.00
13.00

16.00
18.00
1.49

L.S.

26.00

1.49
Total:
3178.11

Add water charges @ 1% on

Add C.P & OH @15% on

3209.89
Cost for 24.00 sets
Rate per Each Set:
Rate as per DSR-12:

Rs 153.81
Rs 153.80

Item Code: 5.10.4

P/F tie bolt, spring, plastic cone in wall shuttering. 20 mm dia & 225 mm length.
Details of Cost for : 24.00 sets
Code
Description
Unit
Quantity
Details of cost for wall length 7.90mxlm (24 set)
MATERIAL:
7323
Tie bott.20mm dia & 225mm length
each
24.00
7324
Spring coil 12 mm dia
each
48.00
7325
Plastic cone 12mm dia.
each
48.00
9999
Carriage:
L.S.
13.00
9999
Sundries
L.S.
26.00
Add water charges @ 1% on

Rate

80.00
16.00
18.00
1.49
1.49
Total:
3610.11

Add C.P & OH @15% on

3646.21
Cost for 24.00 sets
Rate per Each Set:
Rate as per DSR-12:

Rs 174.71
Rs 174.70

Item Code: 5.11.1

Extra for additional height in centering, shuttering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part
thereof - Suspended floors, roofs, landing, beams ..

Code

7345
7343

Details of Cost for : 28.80 Sqm

Description
Unit
Quantity
Assuming that shuttering material will become
unserviceable after use 40 times
Less salvage value of material after full use @ 25% of cost
material
Add 10% of cost of material for maintenance
1. Prop 4m
Prop 4m
each
0.4463
Qty taken for cost using once = 21 x0.85/40 =0.4463
Adjustable telescopic prop 3m (2.02 - 3.75m)
each
-0.4463
Qty taken for cost using once = 21x0.85/40 =0.4463
(Difference of rate between 4m prop and 3m)

Rate

1170.00
1150.00

Bracing
MS tube 40mm
7x4.8m = 33.60m
3x6.0m= 18.00m
Total = 51.60m

DSR-12

Page 100 of 2298

7330

MS tube 40mm
(Qty taken for cost using once = 51.6x0.85/40=1.0965)

metre

1.0965

280.00

7346

Double coupler
Qty taken for cost using once = 21 x0.85/40 =0.4463
Carriage
LABOUR:
Fitter grade-I
Beldar
Sundries

each

0.4463

55.00

L.S.

65.00

1.49

Day
Day
L.S.

3.00
6.00
130.00

301.00
247.00
1.49
Total:
3016.04

9999
0116
0114
9999

Add water charges @ 1% on

Add C.P & OH @15% on

3046.20
Cost for 28.80 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 121.64
Rs 121.65

Item Code: 5.12

Providing, hoisting and fixing upto floor 5 level precast RCC work in string courses, bands etc with 1:2:4
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
04.005.02 P/F upto floor five level pre- cast C.C. string or lacing courses,
1.00
copings, bed plates, an
(A) (Rate as per item no 4.5.2)
(NB : Rate has been taken including cost of fixing in CM 1:2 as
precast members are to be fixed in CM 1:2)(1 cement: 2
coarse sand) as per CPWD specifications
LABOUR:
Extra labour for laying CC in RCC work
0114
Beldar
Day
0.10
0101
Bhishti
Day
0.20
0123
Mason 1st class
Day
0.04
0124
Mason 2nd class
Day
0.04
0128
Mate
Day
0.04
Add water charges @ 1% except on [A] i.e on

Rate
5134.29

247.00
260.00
301.00
273.00
260.00
Total:
110.06

Add C.P & OH @15% except on [A] i.e on

111.16
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5262.12
Rs 5265.20

Item Code: 5.13

P/H/F up to floor 5 level precast RCC in small lintels including centering, shuttering, finishing excluding reinforcement with 1:2:4 coarse sand - stone aggregate 20mm.
Details of Cost for : 0.54 Cum
Code
Description
Unit
Quantity
Rate
04.002.03 P/L CC walls string courses, coping, bed blocks, window sills Cum
0.54
5272.38
,etc. up to floor five level
04.003.01 C/S i/c strutting for Foundation, footing etc
Sqm
6.00
166.88
LABOUR :
0114
Beldar
Day
0.05
247.00
0101
Bhisthi
Day
0.10
260.00
0123
Mason I class
Day
0.02
301.00
0124
Mason II class
Day
0.02
273.00

DSR-12

Page 101 of 2298

0128

Mate

Day

0.02

Add water charges @ 1% except on [A]+[B] i.e on

260.00
Total:
55.03

Add C.P & OH @15% except on [A]+[B] i.e on

55.58
Cost for 0.54 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 7244.98
Rs 8720.30

Item Code: 5.14

Providing, hoisting and fixing upto floor 5 level precast RCC in mouldings with 1:2:4.
Details of Cost for : 0.03 Cum
Code
Description
Unit
Quantity
Cement concrete 1:2:4
04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 - Cum
0.03
Coarse sand, 20mmstone a
Extra labour for lifing
0.45x0.03x2.5 = 0.034
0115
Coolie
Day
0.034
9999
Mortar and labour for hoisting and for fixing
L.S.
2.73
04.003.01 C/S i/c strutting for Foundation, footing etc
0.36
9999
Add for extra labour for hoisting (53.82x0.03)
L.S.
1.61
LABOUR :
Add Extra labour for moulding :
0123
Mason (brick layer) 1st class
Day
0.0174
0124
Mason 2nd class (0.58x0.03)
Day
0.0174
0115
Coolie 1.5x0.03
Day
0.045
0101
Bhishti 0.06x0.03
Day
0.0018
Extra labour for laying CC in RCC
0114
Beldar 0.1x0.03
Day
0.003
0101
Bhishti 0.2x0.03
Day
0.006
0123
Mason 1st class 0.04x0.03
Day
0.0012
0124
Mason 2nd class 0.04x0.03
Day
0.0012
0128
Mate 0.04x0.03
Day
0.0012
Add water charges @ 1% except on [A]+[B] i.e on

Rate
4514.03

247.00
1.49
166.88
1.49

301.00
273.00
247.00
260.00
247.00
260.00
301.00
273.00
260.00
Total:
39.75

Add C.P & OH @15% except on [A]+[B] i.e on

40.15
Cost for 0.03 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 8055.67
Rs 8089.00

Item Code: 5.15

Providing, hoisting and fixing upto floor 5 level precast RCC in lintels etc with 1:2:4
Details of Cost for : 0.99 Cum
Code
Description
Unit
Quantity
Details of cost for beam 6.60m long 0.50m deep and 0.30m
wide = 6.60x0.50x0.30 = 0.99 cum.
MATERIALS:
04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 - Cum
0.99
Coarse sand, 20mmstone a
04.003.01 C/S i/c strutting for Foundation, footing etc
6.90
Extra labour for lifting material upto floor V level
0115
Coolie
Day
1.11
LABOUR
Extra labour for layin cement concrete in RCC work

DSR-12

Rate

4514.03
166.88
247.00

Page 102 of 2298

0114
0101
0123
0124
0128
9999
9999

Beldar
Bhishti 0.20x0.99
Mason 1st class 0.04x0.99
Mason 2nd class 0.04x0.99
Mate 0.04x0.99
Cement mortar 1:3 for fixing
Labour for hoisting, Transporting and setting in position

Day
Day
Day
Day
Day
L.S.
L.S.

0.099
0.198
0.0396
0.0396
0.0396
89.70
269.10

Add water charges @ 1% except on [A]+[B] i.e on

247.00
260.00
301.00
273.00
260.00
1.49
1.49
Total:
917.74

Add C.P & OH @15% except on [A]+[B] i.e on

926.92
Cost for 0.99 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 6753.86
Rs 6754.00

Item Code: 5.16

P/H/F up to floor 5 level precast RCC in SHELVES including centering, shuttering, finishing excluding reinforcement with 1:2:4 coarse sand - stone aggregate 12.5mm.
Qtys multiplied by 100 for better accuracy
Details of Cost for : 1.62 Cum
Code
Description
Unit
Quantity
Rate
04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 - Cum
1.62
4514.03
Coarse sand, 20mmstone a
Finishing :
13.018

Neat cement punning

(A) Centring and shuttering:100x 2x(0.90+0.45)x0.04 =
10.8sqm

Sqm

85.00

31.12

04.003.01

C/S i/c strutting for Foundation, footing etc

Extra labour for lifting material upto floor V level

Sqm

10.80

166.88

0115

Coolie
Day
Extra labour for laying cement concrete in RCC work due to
delay etc.

1.80

247.00

0114
0101
0123
0124
0128
9999

Beldar
Bhisthi
Mason I class
Mason II class
Mate
Cement mortar 1:3 for fixing

Day
Day
Day
Day
Day

1.60
0.32
0.06
0.06
0.06

247.00
260.00
301.00
273.00
260.00

9999

Labour for hoisting, Transporting and setting

L.S.
L.S.

442.00
1352.00

1.49
1.49
Total:
3646.10

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

3682.56
Cost for 1.62 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 9873.56
Rs 9872.85

Item Code: 5.17

Providing, hoisting and fixing upto floor 5 level precast RCC in vertical and horizontal fins with 1:2:4
Details of Cost for : 0.66 Cum
Code
Description
Unit
Quantity

DSR-12

Rate

Page 103 of 2298

Details of cost for 4 RCC vertical fins 4m high at lm centre to

centre with two horizontal fins, all projecting 60cm from face
of wall and 5cm thick cubical contents = 0.66 cum.

0114
0101
0123
0124
0128
9999
9999

MATERIAL:
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
C/S i/c strutting for Foundation, footing etc
(Rate same as per item no. 4.3.1)
Extra labour for lifting material upto floor V level
(B) Coolie
LABOUR
Extra labour for laying cement concrete in RCC work due to
delay etc.
(B) Beldar
(B) Bhishti
(B) Mason 1st class
(B) Mason 2nd class
(B) Mate
(B) Cement mortar 1:2 for fixing
(B) Labour for hoisting, Transporting and setting in position

9999

(B) Sundries

04.001.03
04.003.01

0115

0.66

4514.03

2.56

166.88

Day

0.75

247.00

Day
Day
Day
Day
Day
L.S.
L.S.

0.066
0.132
0.0264
0.0264
0.0264
17.94
71.76

247.00
260.00
301.00
273.00
260.00
1.49
1.49

L.S.

17.94

1.49
Total:
418.27

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

422.45
Cost for 0.66 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5897.41
Rs 5897.50

Item Code: 5.18.1

Providing precast CC jali 1:2:4 50 mm thick.
Code

0768
9999
9999
0123
0124
0114

Description
Details of cost for jali
2.00mx0.75m = 1.50 sqm. of jali
Cost of jali
Mortar for fixing
Carriage and sundries
Labour (for fixing):
Mason 1st class
Mason 2nd class
Beldar

Details of Cost for : 1.50 Sqm

Unit
Quantity

Rate

sqm
L.S.
L.S.

1.50
6.24
6.20

210.00
1.49
1.49

Day
Day
Day

0.30
0.30
1.08

301.00
273.00
247.00
Total:
772.50

Add water charges @ 1% on

Add C.P & OH @15% on

780.23
Cost for 1.50 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 598.17
Rs 598.15

Item Code: 5.18.2

Providing precast CC jali 1:2:4 40 mm thick.
Code

DSR-12

Description

Details of Cost for : 0.75 Sqm

Unit
Quantity

Rate

Page 104 of 2298

0769
9999
9999
0123
0124
0114

Details of cost for 1.2mx0.60m = 0.75 sqm. of jali.

Cost of jali
Mortar for fixing
Carriage and sundries
Labour (for fixing):
Mason 1st class
Mason 2nd class
Beldar

sqm
L.S.
L.S.

0.75
3.64
3.64

180.00
1.49
1.49

Day
Day
Day

0.12
0.12
0.50

301.00
273.00
247.00
Total:
338.22

Add water charges @ 1% on

Add C.P & OH @15% on

341.60
Cost for 0.75 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 523.79
Rs 523.80

Item Code: 5.18.3

Providing precast CC jali 1:2:4 25 mm thick.
Code
0770
9999
9999
0123
0124
0114

Details of Cost for : 0.375 Sqm

Unit
Quantity

Description
Details of cost for jali 0.75mx0.5m = 0.375 sqm
Cost of jali
Mortar for fixing
Carriage and sundries
Labour (for fixing):
Mason lstclass
Mason 2nd class
Beldar

Rate

sqm
L.S.
L.S.

0.375
1.82
1.82

145.00
1.49
1.49

Day
Day
Day

0.06
0.06
0.25

301.00
273.00
247.00
Total:
155.99

Add water charges @ 1% on

Add C.P & OH @15% on

157.55
Cost for 0.375 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 483.15
Rs 483.15

Item Code: 5.19

Encasing rolled steel sections in beams and columns, with CC 1:2:4
Code

04.001.03

0114
0101
0123
0124

DSR-12

Description
Details of cost for 0.424 cum.
Consider 2 R.S. Joist (150mmx80mm) 4.88m long placed 30cm
apart centre to centre
Overall dimensions of the beam 43cmx20cmMATERIAL:
Concrete work4.93x0.43x0.20 = 0.424 cum
For 1:2:4 Cement Concrete (1 cement: 2 coarse sand : 4 stone
aggregate 20mm NS)
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
Extra labour for laying C.C. in RCC work
(A) Beldar
(A) Bhishti
(A) Mason 1st class
(A) Mason 2nd class

Details of Cost for : 0.424 Cum

Unit
Quantity

Day
Day
Day
Day

Rate

0.424

4514.03

0.042
0.085
0.017
0.017

247.00
260.00
301.00
273.00

Page 105 of 2298

0128
05.009.05

9999

(A) Mate
Day
Form workCentering & shuttering including strutting, propping etc. Lintels, beams, plinth beams,
(Rate as per item N . 5.9.5
(B) Sundries and for lifting materials
L.S.

0.017

260.00

4.09

262.19

21.58

1.49
Total:
78.80

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

79.59
Cost for 0.424 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 7259.06
Rs 7259.65

Item Code: 5.20

Encasing rolled steel section in grillages with CC 1:2:4
Code

04.001.03

0114
0101
0123
0124
0128
05.009.05

Description
Details of cost for the grillage 3.50mx3.50mxl.00m
Cement concrete 1:2:4
3.50mx3.50xl.00=12.25cumCement concrete 1:2:4
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
Extra labour for laying C.C. in RCC work
(Rate as (B) in item 5.12)
Beldar
Bhishti
Mason 1st class
Mason 2nd class
Mate
Shuttering :
Centering & shuttering including strutting, propping etc. Lintels, beams, plinth beams,

Details of Cost for : 12.25 Cum

Unit
Quantity

Rate

12.25

4514.03

1.225
2.45
0.49
0.49
0.49

247.00
260.00
301.00
273.00
260.00

14.00

262.19

Add water charges @ 1% except on [A]+[B] i.e on

Total:
1348.24

Day
Day
Day
Day
Day

Add C.P & OH @15% except on [A]+[B] i.e on

1361.72
Cost for 12.25 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4941.51
Rs 4941.60

Item Code: 5.21

Extra for P/F expanded metal mesh for encasing of rolled steel sections in beams, columns etc
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS:
Expended metal 20 mm x 60 mm and 1.6 mm thick = 10 sqm

1015
9999
9999
0102
0114

DSR-12

wastage 5 % = 0.50 sqm

Total =10.50 sqm
Carriage of expended metal
Wire for tieing
Cost of bending and placing in position
Blacksmith 1st class
Beldar

Rate

sqm
L.S.
L.S.

10.50
13.52
13.52

270.00
1.49
1.49

Day
Day

0.25
0.25

301.00
247.00

Page 106 of 2298

Add water charges @ 1% on

Total:
3012.28

Add C.P & OH @15% on

3042.40
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 349.88
Rs 349.90

Item Code: 5.22.1

Reinforcement for R.C.C. work all complete. -Upto plinth level Mild steel and Medium Tensile steel bars.
Details of Cost for : 100.00 Kg
Code
Description
Unit
Quantity
MATERIALS:
Mild steel bars = 1.00 q
Add 5% wastage = 0.05
1004

Total = 1.05 q

2205
9999

Carraige of Steel
Cover block

Rate

quint
tonne

1.05
0.105

4050.00
77.87

L.S.

26.00

1.49

Day
Day

1.00
1.00

301.00
247.00

L.S.

26.91

1.49
Total:
4887.52

LABOUR:
For straightening, cutting, bending, binding
and placing in position0102
0114
9999

Blaks smith I Class

Beldar
Sundries and binding wire L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

4936.40
Cost for 100.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 56.77
Rs 56.75

Item Code: 5.22.2

Reinforcement for RCC work :- Upto plinth level - Hard drawn steel wire.
Code

1224
2205

0102
0114
9999

Description
MATERIALS:
Hard drawn steel wire = 1.00 q
wastage 5%=0.05q
Total = 1.05 q
Carriage 1.05q = 0.105 tonne
LABOUR:
For cutting and laying in position etcBlacksmith 1st class
Beldar
Sundries

Details of Cost for : 100.00 Kg

Unit
Quantity

Rate

quint
tonne

1.05
0.105

4200.00
77.87

Day
Day
L.S.

1.00
1.00
26.91

301.00
247.00
1.49
Total:
5006.28

Add water charges @ 1% on

Add C.P & OH @15% on

5056.34
Cost for 100.00 Kg

DSR-12

Page 107 of 2298

Rate per One Kg:

Rate as per DSR-12:

Rs 58.15
Rs 58.15

Item Code: 5.22.3

Reinforcement for RCC work : Upto plinth level - Cold twisted bars.
Code

Details of Cost for : 100.00 Kg

Unit
Quantity

Description

Rate

MATERIALS:
Deformed twisted steel bars = 1.00 q
wastage 5% = 0.05q
1005
2205

Twisted steel / deformed bars

Carriage of steel 1.05/10 = 0.105t

9999

Cover Block

quint

1.05

4500.00

tonne

0.105

77.87

L.S.

26.00

1.49

Day
Day

1.00
1.00

301.00
247.00

L.S.

26.91

1.49
Total:
5360.02

LABOUR :
For straightening, cutting, bending, binding
and placing in position0102
0114
9999

Blacksmith 1st class

Beldar
Sundries and binding wire

Add water charges @ 1% on

Add C.P & OH @15% on

5413.62
Cost for 100.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 62.26
Rs 62.25

Item Code: 5.22.4

Reinforcement for RCC work :- Upto plinth level - Hot rolled deformed bars.
Code

1005
2205
9999

0102
0114
9999

Description

Details of Cost for : 100.00 Kg

Unit
Quantity

MATERIALS:
Deformed twisted steel bars = 1.00 q
wastage 5 % =0.05q
Total = 1.05q
quint
Carriage of steel 1.05/10 = 0.105t
tonne
Cover block
L.S.
LABOUR:
For straightening, cutting, bending, binding and placing in
positionBlacksmith 1st class
Day
Beldar
Day
Sundries and binding wire
L.S.

Rate

1.05
0.105
26.00

4500.00
77.87
1.49

1.00
1.00
26.91

301.00
247.00
1.49
Total:
5360.02

Add water charges @ 1% on

Add C.P & OH @15% on

5413.62
Cost for 100.00 Kg
Rate per One Kg:

DSR-12

Rs 62.26

Page 108 of 2298

Rate as per DSR-12:

Rs 62.25

Item Code: 5.22.5

Reinforcement for RCC work :- Upto plinth level - Hard drawn steel wire fabric.
Details of Cost for : 100.00 Kg
Code
Description
Unit
Quantity
MATERIALS:
Hard drawn steel wire fabric 100kg/7.75kg
= 12.903 sqm., wastage 5 % = 0.64 sqm
1021
Total =13.548 sqm.
sqm
13.548
2205
Carriage 1.05q = 0.105 tonne
tonne
0.105
9999
Cover block
L.S.
26.00
LABOUR:
For cutting and laying in position.
0103
Blacksmith 2nd class
Day
0.20
0114
Beldar
Day
1.50
9999
Sundries and binding wire
L.S.
13.52
Add water charges @ 1% on

Rate

430.00
77.87
1.49

273.00
247.00
1.49
Total:
6317.80

Add C.P & OH @15% on

6380.98
Cost for 100.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 73.38
Rs 73.40

Item Code: 5.22.6

Reinforcement for RCC work including straightening, cutting, bending, placing in position complete. - Upto plinth level ThermoMechanically Treated bars.
Details of Cost for : 100.00 Kg
Code
Description
Unit
Quantity
Rate
Qty of TMT bars : 1.00 q
add 5% wastage : 0.05q
Total : 1.05q
1005-A

Thermo mechanically treated steel bars (for reinforcement)

9999

Cover blocks

Qtl

1.05

4500.00

L.S.

26.00

1.49

Day
Day
L.S.

1.00
1.00
26.91

301.00
247.00
1.49
Total:
5351.84

For straightening, cutting, bending, binding and placing in

position0102
0114
9999

Blaks smith I Class

Beldar
Sundries

Add water charges @ 1% on

Add C.P & OH @15% on

5405.36
Cost for 100.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 62.16
Rs 62.25

Item Code: 5.23

Smooth finishing of exposed surface in RCC work with 6 mm CM 1:3.
Details of Cost for : 10.00 Sqm

DSR-12

Page 109 of 2298

Code
03.003
0155
0115
0101
9999
9999

Description
Unit
MATERIALS:
Cement mortar 1:3 (1 cement : 3 fine sand)
(Rate as per items No. 3.3)
Mason
Day
Coolie
Day
Bhisti
Day
Extra for removing burrs, cleaning with wire brushes pock L.S.
marking with pointed tool etc. c
Scaffolding and Sundries
L.S.

Quantity

Rate

0.072

3631.93

0.51
0.75
0.92
13.39

287.00
247.00
260.00
1.49

11.70

1.49
Total:
869.70

Add water charges @ 1% on

Add C.P & OH @15% on

878.40
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 101.02
Rs 101.00

Item Code: 5.24

Extra for rendring smooth on top of suspended floors with CM 1 : 2
Code
03.007
0367
2209
0123
0124
0114
9999
0983
2261
9999
9999

Description
MATERIALS:
Cement mortar 1:2 (1 cement : 2 coarse)
(Rate as per item No. 3.2
finishing (Floating coat) cement
Carriage of cement
Labour:
Mason I class
Mason II class
Beldar
Spreading earth on floor (7.5mm thick)
Spreading sand 15mm thick on floor
Fine sand
Carriage of sand
Labour:
Disposal of earth spread over floor protectiron
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
Cum

Rate

0.03

4863.86

0.0213
0.0213

5000.00
77.87

Day
Day
Day
L.S.

0.20
0.20
0.25
35.49

301.00
273.00
247.00
1.49

cum
cum

0.15
0.15

640.00
87.60

L.S.
L.S.

5.33
6.24

1.49
1.49
Total:
609.89

tonne
tonne

Add water charges @ 1% on

Add C.P & OH @15% on

615.99
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 70.84
Rs 70.85

Item Code: 5.25

P/F in position copper plate for expansion joints .
Code

0967
0103
9999

DSR-12

Details of Cost for : 10.56 Kg

Description
Unit
Quantity
Details of cost for 3.0 m lenght, width 250mm and 1.6 mm
thick = 0.750 sqm
Weight of copper plate @ 14.08 kg/m 10.56kg
kilog
10.56
LABOUR
Blacksmith 2nd class
Day
0.25
Sundries
L.S.
6.24

Rate

270.00
273.00
1.49

Page 110 of 2298

Add water charges @ 1% on

Total:
2928.75

Add C.P & OH @15% on

2958.04
Cost for 10.56 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 322.14
Rs 322.15

Item Code: 5.26

Providing and filling in position, blown bitumen in expansion joints.
Code
0313

2211
0370

2200
0123
0124
0114
9999

Details of Cost for : 11250.00 units

Unit
Quantity
Rate

Description
MATERIAL :Bitumen 85/25 @ 1050kg per cum.
1.25x1050kg = 1181.25kg
Add wastage @ 5% = 59.06 kg.
= 1240.31 kg = 1.2401
Carriage of bitumen
Steam coal for heating of bitumen @ 2.0
quintal per tonne of bitumen.
1.240x2.0=2.48q=0.248t
Carriage of steam coal
Labour for heating, mixing and fillingMason 1 st class
Mason 2nd class
Beldar
Sundries

tonne

1.24

37000.00

tonne
quint

1.24
2.48

87.60
400.00

tonne

0.248

100.11

2.52
2.52
8.06
121.16

301.00
273.00
247.00
1.49
Total:
50623.28

Day
Day
Day
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

51129.51
Cost for 11250.00 units
Rate per /cm/cm/100:
Rate as per DSR-12:

Rs 522.66
Rs 522.65

Item Code: 5.27

P/F in position bitumen mix filler for expansion joints.
Code

0309
2211
0370
2200
0367
2209
0982
2203

DSR-12

Description
MATERIALS
Bitumen S-90 = 256.30 kg per cum.
256.30xl.125 = 288.34 kg.
Add for wastage @ 5% = 14.42 kg.
= 302.76 kg. or = 0.303 tonne.
Bitumen
Carriage of bitumen
Stem coal for heating of bitumen @ 2.0 quintal per tonne of
bitumen, i.e. 0.303x2.0=0.606q
Carriage of steam coal
Cement:
1/80x228.34=3.6 kg = 0.0036 Tonne
Carriage of cement
Coarse sand l/4th of the quantity of cement in kg = 3.6/4 =
0.90 cum. Carriage of coarse sand
Labour for heating and filling :

Details of Cost for : 11250.00 units

Unit
Quantity
Rate

tonne
tonne
quint

0.303
0.303
0.606

37000.00
87.60
400.00

tonne

0.061

100.11

tonne
tonne
cum

0.0036
0.0036
0.90

5000.00
77.87
1120.00

0.90

87.60

cum

Page 111 of 2298

0123
0124
0114
9999

Mason 1 st class
Mason 2nd class
Beldar
Sundries

Day
Day
Day
L.S.

2.52
2.52
8.06
121.16

Add water charges @ 1% on

301.00
273.00
247.00
1.49
Total:
16209.00

Add C.P & OH @15% on

16371.09
Cost for 11250.00 units
Rate per /cm/cm/100:
Rate as per DSR-12:

Rs 167.35
Rs 167.35

Item Code: 5.28

P/F in position 12 mm thick bitumen fibre board in expansion joints.
Code

0339
0316

0314
9999
0123
0124
0114
9999

Details of Cost for : 1000.00 units

Description
Unit
Quantity
Details of cost for joint 100m long 10cm deep and 12mm thick
MATERIAL:
(i) Impregnated fibre board
lxl00x0.075=7.5sqm.
(ii) Primere 80m/litter 100m=100/80 x1=1.25 lit
(iii) Sealing compound @ 3m per litrer for
100m = 100/3x1 =33.3 litres+Wastage @ 5% =
1.67 = 35.00 litre (1 litre = 0.9 Kg) =
35.00x0.9 = 31.5 Kg.
Carriage
LABOUR:
Mason 1 st class
Mason 2nd class
Beldar
Sundries

Rate

sqm

7.50

350.00

litre

1.25

40.00

kilog

31.50

26.00

L.S.

26.91

1.49

Day
Day
Day
L.S.

0.12
0.12
0.25
26.91

301.00
273.00
247.00
1.49
Total:
3704.83

Add water charges @ 1% on

Add C.P & OH @15% on

3741.88
Cost for 1000.00 units
Rate per /cm/cm/100:
Rate as per DSR-12:

Rs 430.32
Rs 430.30

Item Code: 5.29.1.1

P/F sheet covering over expansion joints. Non-asbestos fibre board 6 mm thick 150 mm wide.
Details of Cost for : 3.00 m
Code
Description
Unit
Quantity
MATERIALS:
0236
Non - Asbestos multi purpose fibre cement
sqm
0.47
board 6mm thick.
2273
Carriage of sheets- 0.45sqm = 0.0049 tonne
tonne
0.0049
9999
50mm iron screws with washer and rawl plugs
L.S.
40.30
LABOUR:
0112
Carpenter 2nd class
Day
0.20
0114
Beldar
Day
0.20

DSR-12

Rate
182.00
77.87
1.49

Add water charges @ 1% on

273.00
247.00
Total:
249.97

Add C.P & OH @15% on

252.47

Page 112 of 2298

Cost for 3.00 m

Rate per One Metre:
Rate as per DSR-12:

Rs 96.78
Rs 96.80

Item Code: 5.29.1.2

P/F sheet covering over expansion joints. Non-asbestos fibre board 6 mm thick 200 mm wide.
Details of Cost for : 3.00 m
Code
Description
Unit
Quantity
MATERIALS:
0236
Non - Asbestos multi purpose fibre cement board 6mm thick. sqm
0.63
2273
9999
0112
0114

Carriage of sheet 0.60sqm. = 0.0065 tonne

50mm iron screws with washer and rawl plugs
LABOUR:
Carpenter 2nd class
Beldar

tonne
L.S.
Day
Day

Rate
182.00

0.0065
53.82

77.87
1.49

0.27
0.27

273.00
247.00
Total:
335.76

Add water charges @ 1% on

Add C.P & OH @15% on

339.12
Cost for 3.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 130.00
Rs 130.00

Item Code: 5.29.2.1

P/F sheet covering over expansion joints. Aluminium fluted strips 3.15 mm thick : 150 mm wide.
Details of Cost for : 1.00 m
Code
Description
Unit
Quantity
MATERIALS:
2391
3.15mm thick aluminium fluted
metre
1.00
strips-1 m x 15cm wide
0639
Iron screws 25mm
100 N
6.00
9999
Carriage of materials
L.S.
1.04
LABOUR:
0112
Carpenter 2nd class
Day
0.067
0114
Beldar
Day
0.067
9999
Sundries
L.S.
1.82
Add water charges @ 1% on

Rate
228.00
30.00
1.49
273.00
247.00
1.49
Total:
268.90

Add C.P & OH @15% on

271.59
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 312.33
Rs 312.35

Item Code: 5.29.2.2

P/F sheet covering over expansion joints. Aluminium fluted strips 3.15 mm thick : 200 mm wide.
Details of Cost for : 1.00 m
Code
Description
Unit
Quantity
MATERIALS:
2392
Strips Aluminium fluted 3.15mm thick and
Metre
1.00
200mm wide metre
0639
Iron serews 25mm
100 N
6.00
9999
Carriage of materials
L.S.
1.30

DSR-12

Rate
323.00
30.00
1.49

Page 113 of 2298

0112
0114
9999

LABOUR:
Carpenter 2nd class
Beldar
Sundries

Day
Day
L.S.

0.089
0.089
2.34

Add water charges @ 1% on

273.00
247.00
1.49
Total:
376.51

Add C.P & OH @15% on

380.28
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 437.32
Rs 437.30

Item Code: 5.30

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
Details of Cost for : 30.00 m
Code
Description
Unit
Quantity
LABOUR:
0123
Mason I class
Day
0.50
0124
Mason II class
Day
0.50
0115
Coolie
Day
1.00
9999
Add for materials (cement mortar etc.)
L.S.
26.91
Add water charges @ 1% on

Rate
301.00
273.00
247.00
1.49
Total:
574.10

Add C.P & OH @15% on

579.84
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 22.23
Rs 22.25

Item Code: 5.31

Extra for laying RCC in or under water and/or liquid mud
Code

0011
0114

Description
Analysis Same As As Per Item No 4.15
Details of cost for depth of water 0.30m.
Quantity of concrete = 14 cum.
pumping hours = 3 hrs. or 0.375 day.
Cost of pumping water with
3636.7 litres per hour capacity pump
Beldar for cleaning slush

Details of Cost for : 4.20 Cum

Unit
Quantity

Rate

Day

0.375

500.00

Day

4.00

247.00
Total:
1175.50

Add water charges @ 1% on

Add C.P & OH @15% on

1187.26
Cost for 4.20 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 325.08
Rs 325.10

Item Code: 5.32

Extra for laying RCC in or foul position
Code

DSR-12

Description
Analysis Same As Item No 4.16
Extra labour due to slow progress-

Details of Cost for : 1.00 Cum

Unit
Quantity

Rate

Page 114 of 2298

0123
0124
0114
0115

Mason 1 st class
Mason 2nd class
Beldar
Coolie

Day
Day
Day
Day

0.02
0.02
0.25
0.15

Add water charges @ 1% on

301.00
273.00
247.00
247.00
Total:
110.28

Add C.P & OH @15% on

111.38
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 128.09
Rs 128.10

Item Code: 5.33.1

P/L machine batched and machine mixed design mix M-25 grade CC for RCC including pumping of concrete to site, including
admixtures ..
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
MATERIAL:
0295
Stone Aggregate (Single size) : 20 mm nominal size
cum
0.57
1050.00
0297
Stone Aggregate (Single size) : 10 mm nominal size
cum
0.28
1050.00
2202
Carraige of Stone aggregate below 40 mm nominal size
cum
0.85
87.60
0982
Coarse sand (zone III)
cum
0.425
1120.00
2203
Carraige of Coarse sand
cum
0.425
87.60
0367
Portland Cement
tonne
0.33
5000.00
2209
Carraige of Cement
tonne
0.33
77.87
7318
Plasticizer / super plasticizer
0.50% OF cement
kilog
1.65
36.50
Production cost, pumping to respective floors and laying in
position
0004
Production cost of concrete by batch mix plant.
cum
1.00
350.00
0009
Pumping charges of concrete including Hire charges of pump, cum
1.00
130.00
piping work & accessories etc.
Labour for pouring, consolidating & curing
0155
Mason (average)
Day
0.17
287.00
LABOUR:
0114
Beldar
Day
2.00
247.00
0101
Bhisti
Day
0.90
260.00
0012
Vibrator (Needle type 40mm)
Day
0.07
300.00
9999
Sundries
L.S.
13.00
1.49
Total:
Add water charges @ 1% on
4513.28
Add C.P & OH @15% on
4558.41
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5242.17
Rs 5242.15

Item Code: 5.33.2

P/L machine batched and machine mixed design mix M-25 grade CC for RCC including pumping of concrete to site, including
admixtures .. All work above pilnth
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
MATERIAL:
0295
Stone Aggregate (Single size) : 20 mm nominal size
cum
0.57
1050.00
0297
Stone Aggregate (Single size) : 10 mm nominal size
cum
0.28
1050.00
2202
Carraige of Stone aggregate below 40 mm nominal size
cum
0.85
87.60

DSR-12

Page 115 of 2298

0982
2203
0367
2209
7318

0004
0009

0155
0114
0101
0012
9999

0115

Coarse sand (zone III)

Carraige of Coarse sand
Portland Cement
Carraige of Cement
Plasticizer / super plasticizer
0.50% OF cement
Production cost, pumping to respective floors and laying in
position
Production cost of concrete by batch mix plant.
Pumping charges of concrete including Hire charges of pump,
piping work & accessories etc.
LABOUR:
Labour for pouring, consolidating & curing
Mason (average)
Beldar
Bhisti
Vibrator (Needle type 40mm)
Sundries
Extra labour for lifting upto floor five level
0.75 x 2.50 = 1.88
Coolie

cum
cum
tonne
tonne

0.425
0.425
0.33
0.33

1120.00
87.60
5000.00
77.87

kilog

1.65

36.50

cum
cum

1.00
1.00

350.00
130.00

Day
Day
Day
Day
L.S.

0.17
2.00
0.90
0.07
13.00

287.00
247.00
260.00
300.00
1.49

Day

1.88

247.00
Total:
4977.64

Add water charges @ 1% on

Add C.P & OH @15% on

5027.42
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5781.53
Rs 5781.50

Item Code: 5.34.1

Add or deduct for richer or leaner mix M-30 instead of M-25.
Code

0367
2209

7318

Description
Cement for M-30 mix = 0.400 t
Cement for M-25 mix = 0.380 t
Difference 0.020t
Carriage of Cement
Plasticizer for M-30 mix = 2.10 Kg
Plasticizer for M-25 mix = 2.05 Kg
Diffevence =0.05 kg.
Plasticizer / super plasticizer

Details of Cost for : 1.00 Cum

Unit
Quantity

Rate

tonne
tonne

0.01
0.01

5000.00
77.87

kilog

0.10

36.50
Total:
54.43

Add water charges @ 1% on

Add C.P & OH @15% on

54.97
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 63.22
Rs 63.20

Item Code: 5.34.2

Add or deduct for richer or leaner mix M-35 instead of M-25.
Code

0367

DSR-12

Description
Cement for M-35 mix = 0.350 t
Cement for M-25 mix = 0.330 t
Difference 0.02 t

Details of Cost for : 1.00 Cum

Unit
Quantity

tonne

0.02

Rate

5000.00

Page 116 of 2298

2209

7318

Carraige of Cement
Plasticizer for M-35 mix = 2.100 Kg
Plasticizer for M-25mix = 1.90 Kg
Diffevence =0.20 kg.
Plasticizer / super plasticizer

tonne

0.02

77.87

kilog

0.20

36.50
Total:
108.86

Add water charges @ 1% on

Add C.P & OH @15% on

109.95
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 126.44
Rs 126.45

Item Code: 5.34.3

Add or deduct for richer or leaner mix M-40 instead of M-25.
Code

0367
2209

7318

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
Cement for M-40 mix = 0.360 t
Cement for M-25 mix = 0.330 t
Difference = 0.03 t
Carriage of cement
Plasticizer for M-40 mix = 2.175 Kg
Plasticizer for M-25 mix = 0.125 Kg
Difference =0.125kg.
Plasticizer / super plasticizer

Rate

tonne
tonne

0.030
0.030

5000.00
77.87

kilog

0.235

36.50
Total:
160.92

Add water charges @ 1% on

Add C.P & OH @15% on

162.53
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 186.91
Rs 186.90

Item Code: 5.35

Code
0367
2209

Details of Cost for : 1.00 Qtl

Unit
Quantity
tonne
0.10
tonne
0.10

Description
Cement
Carriage of cement

Add water charges @ 1% on

Rate
5000.00
77.87
Total:
507.79

Add C.P & OH @15% on

512.87
Cost for 1.00 Qtl
Rate per One Qtl:
Rate as per DSR-12:

Rs 589.80
Rs 589.80

Item Code: 5.36

P/P in position precast RCC waffle units for floors and roofs in 1:1.5:3
Code

DSR-12

Details of Cost for : 1.38 Cum

Description
Unit
Quantity
Details for wafle 09. x 0.9 x 0.3m Total area covered 4.548 x
3.636 = 16.54 sqm.
Cement concrete in 1unit
Top 0.8 x 0.8 x 0.035 = 0.0224

Rate

Page 117 of 2298

05.002.02

05.009.15

10.002

9999
9999

0126
0114

13.035.01

sides 2(0.8 x 0.265 x 0.0325) = 0.0138

2(0.735 x 0.265 x 0.0325) = 0.0127
Total = 0.0489
Flange 4 x 0.85 x 0.05 x 0.035 = 0.0060
Total = 0.0549
Add for Fillets 25% = 0.0137
Total = 0.069 cum.
Quantity for 20 such units = 1.38 cum
RCC work in walls, columns, pillars, piers, etc. up to floor five
level excluding cost of
(i) Shuttering and centring
Face in contact
4 x 0.8 x 0.265 = 0.848
Inner 4 x 0.735 x 0.265 = 0.779
Top (inside) 1 x 0.735 x 0.735 = 0.540
Flange 4 x 0.9 x 0.035 = 0.126
Total = 2.293 sqm.
Quantity 20 such units 45.86 sqm.
Centering and shuttering .. .. : Small lintels not exceeding
1.5m clear span, moulding as
Hooks for lifting
2 x 1.5 = 3.0 m
4 x 0.01 = 0.04 m = 3.04 m
@ 3 kg per m 9.12 kg or 0.009 t
Structural steel work riveted, bolted or welded in builtup
sections, trusses etc ..and app
(ii) 10 mm dia. Bolts 60 mm long with nuts and washers 2 x 2
= 4Nos.
including carriage of bolts
Sundries etc.
(IV) Transportation and erection labour for 20
units
Mason (for ornamental stone work) 1st class
Beldar
(V) Cost of pointing flush or deep ruled in
cement mortar 1:2 (1 Cement : 2 fine sand)
Pointing on stone slab ceiling with cement mortar 1:2 (1
cement: 2 fine sand): Flush/ Rule

1.38

5735.75

45.86

166.88

9.00

66.52

L.S.
L.S.

13.00
79.95

1.49
1.49

Day
Day

1.00
6.00

301.00
247.00

16.54

63.75

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total:
1921.50

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

1940.72
Cost for 1.38 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 14096.67
Rs 14097.20

Item Code: 5.37.1

P/L RM M-25 grade concrete for RCC work (using cement @ 330 kg/cum) - All work upto plinth level
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS:
0295
Stone Aggregate (Single size) : 20 mm nominal size
cum
0.57
0297
Stone Aggregate (Single size) : 10 mm nominal size
cum
0.28
2202
Carraige of Stone aggregate below 40 mm nominal size
cum
0.85
0982
Coarse sand (zone III)
cum
0.425
2203
Carraige of Coarse sand
cum
0.425
0367
Portland Cement
tonne
0.33
2209
Carraige of Cement
tonne
0.33

DSR-12

Rate
1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87

Page 118 of 2298

7318

0004
0029
0009

0155
0114
0101
0012
9999

Plasticizer / super plasticizer (0.5% of cement )

Production Cost, carraige to site, pumping to respective floors
and laying in position
Production cost of concrete by batch mix plant.
Carriage of concrete by transit mixer.
Pumping charges of concrete including Hire charges of pump,
piping work & accessories etc.
Labour for pouring, consolidating and curing
Mason (average)
Beldar
Bhisti
Vibrator (Needle type 40mm)
Sundries

kilog

1.65

36.50

cum
km/ c
cum

1.00
10.00
1.00

350.00
30.00
130.00

Day
Day
Day
Day
L.S.

0.17
2.00
0.90
0.07
13.00

287.00
247.00
260.00
300.00
1.49
Total:
4813.28

Add water charges @ 1% on

Add C.P & OH @15% on

4861.41
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5590.62
Rs 5590.60

Item Code: 5.37.2

P/L RM M-25 grade concrete for RCC work (using cement @ 330 kg/cum) - All work upto above plinth level upto floor five level

Code
0295
0297
2202
0982
2203
0367
2209
7318

0004
0029
0009

0155
0114
0101
0012
9999

0115

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Stone Aggregate (Single size) : 20 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Carraige of Stone aggregate below 40 mm nominal size
Coarse sand (zone III)
Carraige of Coarse sand
Portland Cement
Carraige of Cement
Plasticizer / super plasticizer (0.5% of cement )
Production Cost, carraige to site, pumping to respective floors
and laying in position
Production cost of concrete by batch mix plant.
Carriage of concrete by transit mixer.
Pumping charges of concrete including Hire charges of pump,
piping work & accessories etc.
Labour for pouring, consolidating and curing
Mason (average)
Beldar
Bhisti
Vibrator (Needle type 40mm)
Sundries
Extra labour for lifting upto floor five level
0.75 x 2.5 = 1.88
Coolie

Rate

cum
cum
cum
cum
cum
tonne
tonne
kilog

0.57
0.28
0.85
0.425
0.425
0.33
0.33
1.65

1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87
36.50

cum
km/ c
cum

1.00
10.00
1.00

350.00
30.00
130.00

Day
Day
Day
Day
L.S.

0.17
2.00
0.90
0.07
13.00

287.00
247.00
260.00
300.00
1.49

Day

1.88

247.00
Total:
5277.64

Add water charges @ 1% on

Add C.P & OH @15% on

5330.42
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

DSR-12

Rs 6129.98
Rs 6130.00

Page 119 of 2298

Item Code: 5.38

Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof. _x000D_
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
0009
Pumping charges of concrete including Hire charges of cum
1.00
pump,piping work & accessories etc
Add water charges @ 1% on

Rate
130.00
Total:
130.00

Add C.P & OH @15% on

131.30
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 151.00
Rs 151.00

Item Code: 5.40.1

P/L in position RMC M-25 grade for reinforced cement concrete work, using fly ash and cement manufactured in fully automatic
batching plant including pumping of R.M.C. - All works up to Plinth level.

Code
0293
0295
2206
2202
0982
2203
1980
2262
0367
2209
7318

0004
0029
0009

0155
0114
0101
0012
9999

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Stone Aggregate (Single size) : 40 mm nominal size
(0.70% - 7.5% for voids i.e 0.05 = 0.65 cum)
Stone Aggregate (Single size) : 20 mm nominal size
Carraige of Stone aggregate 40 mm nominal size and above
Carraige of Stone aggregate below 40 mm nominal size
Coarse sand (zone III)
Carraige of Coarse sand
Fly ash
Carraige of Fly ash
Portland Cement
Carraige of Cement
Plasticizer / super plasticizer
Production cost, Carriage to site, pumping to respective floors
and laying in position.
Production cost of concrete by batch mix plant.
Carriage of concrete by transit mixer.
Pumping charges of concrete including Hire charges of pump,
piping work & accessories etc.
LABOUR :
For pouring, consolidating and curing
Mason (average)
Beldar
Bhisti
Vibrator (Needle type 40mm)
Sundries

Rate

cum

0.65

950.00

cum
cum

0.24
0.65

1050.00
95.22

cum
cum
cum
cum
cum
tonne
tonne
kilog

0.24
0.37
0.37
0.21
0.21
0.33
0.33
1.65

87.60
1120.00
87.60
7.75
87.60
5000.00
77.87
36.50

cum
km/ c
cum

1.00
10.00
1.00

350.00
30.00
130.00

Day
Day
Day
Day
L.S.

0.17
2.00
0.90
0.07
13.00

287.00
247.00
260.00
300.00
1.49
Total:
4752.34

Add water charges @ 1% on

Add C.P & OH @15% on

4799.86
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

DSR-12

Rs 5519.84
Rs 5519.40

Page 120 of 2298

Item Code: 5.40.2

P/L in position RMC M-25 grade for reinforced cement concrete work, using fly ash and cement manufactured in fully automatic
batching plant including pumping of R.M.C. - All works above plinth and upto floor five level

Code
0293
0295
2206
2202
0982
2203
1980
2262
0367
2209
7318

0004
0029
0009

0155
0114
0101
0012
9999

0115

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Stone Aggregate (Single size) : 40 mm nominal size
(0.70% - 7.5% for voids i.e 0.05 = 0.65 cum)
Stone Aggregate (Single size) : 20 mm nominal size
Carraige of Stone aggregate 40 mm nominal size and above
Carraige of Stone aggregate below 40 mm nominal size
Coarse sand (zone III)
Carraige of Coarse sand
Fly ash
Carraige of Fly ash
Portland Cement
Carraige of Cement
Plasticizer / super plasticizer
Production cost, Carriage to site, pumping to respective floors
and laying in position.
Production cost of concrete by batch mix plant.
Carriage of concrete by transit mixer.
Pumping charges of concrete including Hire charges of pump,
piping work & accessories etc.
LABOUR :
For pouring, consolidating and curing
Mason (average)
Beldar
Bhisti
Vibrator (Needle type 40mm)
Sundries
Extra labour for lifting of material upto floor five level = 0.75 x
2.5 = 1.88
Coolie

Rate

cum

0.65

950.00

cum
cum

0.24
0.65

1050.00
95.22

cum
cum
cum
cum
cum
tonne
tonne
kilog

0.24
0.37
0.37
0.21
0.21
0.33
0.33
1.65

87.60
1120.00
87.60
7.75
87.60
5000.00
77.87
36.50

cum
km/ c
cum

1.00
10.00
1.00

350.00
30.00
130.00

Day
Day
Day
Day
L.S.

0.17
2.00
0.90
0.07
13.00

287.00
247.00
260.00
300.00
1.49

Day

1.88

247.00
Total:
5216.70

Add water charges @ 1% on

Add C.P & OH @15% on

5268.87
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 6059.20
Rs 6059.20

Item Code: 5.41.1

Supplying and applying water based concrete curing compound to concrete/ masonry surface. - Non pigmented wet curing
compound
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
7178
Chemical ASTMC-type I
Kg
2.00
100.00
Coverage of chemical @ 5 sqm per kg
Chemical required = 10 / 2 = 5 kg
0124
Mason (brick layer) 2nd class
Day
0.46
273.00
0115
Coolie
Day
0.23
247.00
0101
Bhisti
Day
0.10
260.00
9999
Scaffolding and sundries
L.S.
8.06
1.49

DSR-12

Page 121 of 2298

0114
9999

Extra labour for cleanup process

Beldar
Extra machinery, hand pump, compressor etc.,

Day
L.S.

0.75
80.00

Add water charges @ 1% on

247.00
1.49
Total:
724.85

Add C.P & OH @15% on

732.10
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 84.19
Rs 83.50

Item Code: 5.41.2

Supplying and applying water based concrete curing compound to concrete/ masonry surface. - Pigmented wet curing compound

Code

7281

0124
0115
0101
9999
0114
9999

Description
Based on DAR item 13.44.1
MATERIALS:
Chemical ASTMC-type II
Coverage of chemical @ 5 sqm per kg
Chemical required = 10 / 2 = 5 kg
Mason (brick layer) 2nd class
Coolie
Bhisti
Scaffolding and sundries
Extra labour for cleanup process
Beldar
Extra machinery, hand pump, compressor etc.,

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Kg

2.00

160.00

Day
Day
Day
L.S.

0.46
0.23
0.10
8.06

273.00
247.00
260.00
1.49

Day
L.S.

0.75
80.00

247.00
1.49
Total:
844.85

Add water charges @ 1% on

Add C.P & OH @15% on

853.30
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 98.13
Rs 97.00

Item Code: 5.42.1

P/F tapered / parallel threaded couplers for Mechanical Splices of Bars for Concrete Reinforcement - Coupler for 16 mm diameter
reinforcement bar
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
2394
Coupler 16 mm dia
Nos
1.00
67.50
LABOUR:
9999
For placing in position and fixing
L.S.
3.77
1.49
9999
Tapered / Parallel threading charges
L.S.
17.77
1.49
Total:
Add water charges @ 1% on
99.60
Add C.P & OH @15% on
100.60
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 115.69
Rs 115.65

Page 122 of 2298

Item Code: 5.42.2

P/F tapered / parallel threaded couplers for Mechanical Splices of Bars for Concrete Reinforcement - Coupler for 20 mm diameter
reinforcement bar
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
2395
Coupler 20 mm dia
Nos
1.00
87.75
LABOUR:
9999
For placing in position and fixing
L.S.
5.90
1.49
9999
Tapered / Parallel threading charges
L.S.
25.17
1.49
Total:
Add water charges @ 1% on
134.04
Add C.P & OH @15% on
135.38
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 155.69
Rs 155.70

Item Code: 5.42.3

P/F tapered / parallel threaded couplers for Mechanical Splices of Bars for Concrete Reinforcement - Coupler for 25 mm diameter
reinforcement bar
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
2396
Coupler 25 mm dia
Nos
1.00
129.50
LABOUR:
9999
For placing in position and fixing
L.S.
8.69
1.49
9999
Tapered / Parallel threading charges
L.S.
29.61
1.49
Total:
Add water charges @ 1% on
186.57
Add C.P & OH @15% on
188.44
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 216.71
Rs 216.70

Item Code: 5.42.4

P/F tapered / parallel threaded couplers for Mechanical Splices of Bars for Concrete Reinforcement - Coupler for 28mm diameter
reinforcement bar
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
2397
Coupler 28 mm dia
Nos
1.00
191.25
LABOUR:
9999
For placing in position and fixing
L.S.
12.84
1.49
9999
Tapered / Parallel threading charges
L.S.
32.57
1.49
Total:
Add water charges @ 1% on
258.91
Add C.P & OH @15% on
261.50
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 300.73
Rs 300.75

Page 123 of 2298

Item Code: 5.42.5

P/F tapered / parallel threaded couplers for Mechanical Splices of Bars for Concrete Reinforcement - Coupler for 32 mm diameter
reinforcement bar
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
2398
Coupler 32 mm dia
Nos
1.00
230.50
LABOUR:
9999
For placing in position and fixing
L.S.
15.48
1.49
9999
Tapered / Parallel threading charges
L.S.
32.57
1.49
Total:
Add water charges @ 1% on
302.10
Add C.P & OH @15% on
305.12
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 350.89
Rs 350.90

Item Code: 5.43.1

P/F Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints. -200 mm wide.
Details of Cost for : 1.00 m
Code
Description
Unit
Quantity
MATERIALS:
2393
1 mm thick Stainless Steel Cover plate grade 304
Kg
1.60
8647
Stainless steal screws 30mm x4mm.
cent
0.06
9999
Carriage of material
L.S.
1.30
LABOUR:
0103
Blacksmith 2nd class
Day
0.067
0114
Beldar
Day
0.067
9999
Sundries
L.S.
2.34
Add water charges @ 1% on

Rate
275.00
29.00
1.49
273.00
247.00
1.49
Total:
482.01

Add C.P & OH @15% on

486.83
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 559.85
Rs 559.85

Item Code: 5.43.2

P/F Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints. -300 mm wide.
Details of Cost for : 1.00 m
Code
Description
Unit
Quantity
MATERIALS:
2393
1 mm thick Stainless Steel Cover plate grade 304
Kg
2.40
8647
Stainless steal screws 30mm x4mm.
cent
0.06
9999
Carriage of material
L.S.
1.30
LABOUR:
0103
Blacksmith 2nd class
Day
0.067
0114
Beldar
Day
0.067
9999
Sundries
L.S.
2.34
Add water charges @ 1% on

Rate
275.00
29.00
1.49
273.00
247.00
1.49
Total:
702.01

Add C.P & OH @15% on

709.03
Cost for 1.00 m

DSR-12

Page 124 of 2298

Rate per One Metre:

Rate as per DSR-12:

Rs 815.38
Rs 815.40

Item Code: 6.1.1

Brick work with F.P.S. bricks of class desgn 75 in foundation and plinth in: CM 1:4 (1 cement : 4 coarse sand)

Code
2602
03.009
2201
9999
0123
0124
0115
0101

Description

Details of Cost for : 1.00 Cum

Unit
Quantity

MATERIALS :
Common burnt clay F.P.S (non modular) Bricks of class 1000
designation 7.5
Cement mortar 1:4 (1 cement : 4 coarse sand).
Carriage of bricks
1000
Sundries
L.S.
LABOUR:
Mason 1st Class
Day
Mason Ilnd Class
Day
Coolie
Day
Bhishti
Day

Rate

494.00

2900.00

0.25
494.00
2.73

3485.41
233.60
1.49

0.36
0.36
1.37
0.20

301.00
273.00
247.00
260.00
Total:
3020.45

Add water charges @ 1% on

Add C.P & OH @15% on

3050.65
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3508.25
Rs 3508.25

Item Code: 6.1.2

B/W with bricks of class 75 in found & plinth in in CM 1:6
Code
2602
03.011
2201
9999
0123
0124
0115
0101

Description

Details of Cost for : 1.00 Cum

Unit
Quantity

MATERIALS :
Common burnt clay F.P.S (non modular) Bricks of class 1000
designation 7.5
Cement mortar 1:6 (1 cement : 6 coarse sand).
Carriage of bricks
1000
Sundries
L.S.
LABOUR:
Mason 1st Class
Day
Mason Ilnd Class
Day
Coolie
Day
Bhishti
Day

Rate

494.00

2900.00

0.25
494.00
2.73

2825.29
233.60
1.49

0.36
0.36
1.37
0.20

301.00
273.00
247.00
260.00
Total:
2855.42

Add water charges @ 1% on

Add C.P & OH @15% on

2883.97
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3316.57
Rs 3316.55

Item Code: 6.2.1

B/W with modular bricks in found & plinth in CM 1:4
Code

Description

Details of Cost for : 1.00 Cum

Unit
Quantity

Rate

MATERIALS:

DSR-12

Page 125 of 2298

7900

Modular common burnt clay bricks of class designation 7.5

1000

487.00

3150.00

2201
03.009
9999

Carraige of Bricks
Cement mortar 1:4 (1 cement : 4 coarse sand).
Sundries
LABOUR:
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Coolie
Bhisti

1000
Cum
L.S.

487.00
0.22
2.73

233.60
3485.41
1.49

0.33
0.33
1.00
0.18

301.00
273.00
247.00
260.00
Total:
2901.89

0123
0124
0115
0101

Day
Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

2930.91
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3370.55
Rs 3370.55

Item Code: 6.2.2

B/W with modular bricks in found & plinth in CM 1:6
Code
7900
2201
03.011
9999
0123
0124
0115
0101

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS :
Modular common burnt clay bricks of class designation 7.5
Carriage of Bricks
Cement mortar 1:6 (1 cement : 6 coarse sand).
(Rates as per item no. 3.11)
Sundries
LABOUR:
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti

Rate

1000

487.00

3150.00

1000

487.00
0.22

233.60
2825.29

L.S.

2.73

1.49

Day
Day
Day
Day

0.33
0.33
1.00
0.18

301.00
273.00
247.00
260.00
Total:
2756.66

Add water charges @ 1% on

Add C.P & OH @15% on

2784.23
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3201.86
Rs 3201.90

Item Code: 6.3.1

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 in superstructure above plinth
level up to floor five level in CM 1:6 (1 cement : 6 coarse sand) -With FPS bricks

Code
7901
2201
03.011
9999
0123

DSR-12

Description

Details of Cost for : 1.00 Cum

Unit
Quantity

MATERIALS:
Machine moulded perforated FPS bricks of class designation 1000
12.5
Carraige of Bricks
1000
Cement mortar 1:6 (1 cement : 6 coarse sand).
Cum
Sundries
L.S.
LABOUR:
Mason (brick layer) 1st class
Day

Rate

494.00

4150.00

494.00
0.25
2.73

233.60
2825.29
1.49

0.47

301.00

Page 126 of 2298

0124
0115
0101
9999

0115

Mason (brick layer) 2nd class

Day
Coolie
Day
Bhisti
Day
Scaffolding
L.S.
Extra labour element required for lifting of materials (above
floor two level upto floor five level)
Coolie
Day

0.47
1.80
0.20
22.36

273.00
247.00
260.00
1.49

1.13

247.00
Total:
3954.70

Add water charges @ 1% on

Add C.P & OH @15% on

3994.25
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4593.39
Rs 4593.40

Item Code: 6.3.2

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 in superstructure above plinth
level up to floor five level in CM 1:6 (1 cement : 6 coarse sand) -With Modular bricks

Code
7902
2201
03.011
9999
0123
0124
0115
0101
9999

0115

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Machine moulded modular perforated bricks of class
designation 12.5
Carraige of Bricks
Cement mortar 1:6 (1 cement : 6 coarse sand).
Sundries
LABOUR:
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Coolie
Bhisti
Scaffolding
Extra labour element required for lifting of materials (above
floor two level upto floor five level)
Coolie

Rate

1000

487.00

3800.00

1000
Cum
L.S.

487.00
0.22
2.73

233.60
2825.29
1.49

Day
Day
Day
Day
L.S.

0.44
0.44
1.43
0.18
16.38

301.00
273.00
247.00
260.00
1.49

Day

1.13

247.00
Total:
3546.08

Add water charges @ 1% on

Add C.P & OH @15% on

3581.54
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4118.77
Rs 4118.80

Item Code: 6.4.1

Brick work with FPS bricks of class designation 75 in super structure above plinth level upto floor V level in all shapes and sizes in :
Cement mortar 1:6 (1 cement : 6 coarse sand)

Code
2602
03.009
2201
9999

DSR-12

Description

Details of Cost for : 1.00 Cum

Unit
Quantity

MATERIALS :
Common burnt clay F.P.S (non modular) Bricks of class 1000
designation 7.5
Cement mortar 1:4 (1 cement : 4 coarse sand).
Carriage of bricks
1000
Sundries
L.S.

Rate

494.00

2900.00

0.25
494.00
2.73

3485.41
233.60
1.49

Page 127 of 2298

0123
0124
0115
0101
9999

0115

LABOUR:
Mason 1 st Class
Day
Mason Ilnd Class
Day
Coolie
Day
Bhishti
Day
Scaffolding
L.S.
Extra labour element required for lifting of materials (above
floor two level upto floor five level)
Coolie
Day

0.47
0.47
1.80
0.20
22.36

301.00
273.00
247.00
260.00
1.49

1.13

247.00
Total:
3502.23

Add water charges @ 1% on

Add C.P & OH @15% on

3537.25
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4067.84
Rs 4067.85

Item Code: 6.4.2

Brick work with FPS bricks of class designation 75 in super structure above plinth level upto floor V level in all shapes and sizes in :
Cement mortar 1:6 (1 cement : 6 coarse sand)

Code
2602
03.011
2201
9999
0123
0124
0115
0101
9999

0115

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Common burnt clay F.P.S (non modular) Bricks of class
designation 7.5
Cement mortar 1:6 (1 cement : 6 coarse sand).
Carraige of Bricks
Sundries
LABOUR:
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Coolie
Bhisti
Scaffolding
Extra labour element required for lifting of material ( Above
floor II level to Floor V level)
Coolie

Rate

1000

494.00

2900.00

Cum
1000
L.S.

0.25
494.00
2.73

2825.29
233.60
1.49

Day
Day
Day
Day
L.S.

0.47
0.47
1.80
0.20
22.36

301.00
273.00
247.00
260.00
1.49

Day

1.13

247.00
Total:
3337.20

Add water charges @ 1% on

Add C.P & OH @15% on

3370.57
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3876.16
Rs 3876.15

Item Code: 6.5

Extra for BW in SS above floor 5 level
Code
0037
1235

Description
Details of cost for 5.3 cum per four floors .
Mobile crane.
Fuel consumption per hour = 8 litre.
Diesel oil

Details of Cost for : 5.30 Cum

Unit
Quantity
per d

0.125

6500.00

litre

8.00

41.29
Total:
1142.82

Add water charges @ 1% on

DSR-12

Rate

Page 128 of 2298

Add C.P & OH @15% on

1154.25
Cost for 5.30 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 250.45
Rs 250.45

Item Code: 6.6

Extra for forming cavity 5 cm to 7.5 cm wide in cavity walls
Code
1008
9999
2205

0123
0124
0114
9999

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

MATERIALS :
Mild steel 25mmx3mm section 30cm long 30
quint
No. = 9 metres @ 0.6kg/m = 5.40 kg.
Painting the steel Bitumen
L.S.
Carriage of mild steel
tonne
Extra labour for keeping cavity clear and fixing wall ties and
delay caused:
Mason 1st class
Day
Mason 2nd Class
Day
Beldar
Day
Add for use of Core
L.S.

Rate

0.054

4200.00

13.52
0.005

1.49
77.87

0.37
0.37
0.92
4.55

301.00
273.00
247.00
1.49
Total:
693.73

Add water charges @ 1% on

Add C.P & OH @15% on

700.67
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 80.58
Rs 80.60

Item Code: 6.7

Providing half brick masonry with bricks of class 75 in CM 1:3 in s/s for closing cavity
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Details of cost for 10m length
MATERIALS :
Half brick masonry 1:3 (Average)
1x10x0.27 = 2.7
06.012.01 Half brick masonry with bricks of class 75 in found & plinth in
2.70
CM 1:3
Bitumen felt type- 3 grade 1
lxl0mx11.4m =1.14 sqm.
Add for wastage and overlapping @ 5% = 0.06 sqm.
0322
Total
sqm
1.20
LABOUR:
0123
Mason 1st class
Day
0.12
0124
Mason 2nd class
Day
0.12
0114
Beldar
Day
0.06
Add water charges @ 1% except on [A] i.e on

Rate

438.41

50.00
301.00
273.00
247.00
Total:
143.70

Add C.P & OH @15% except on [A] i.e on

145.14
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 135.06
Rs 135.05

Page 129 of 2298

Item Code: 6.8

Code
2602
03.008
2201
0123
0124
0115
0101
9999

0115

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS:
Common burnt clay F.P.S (non modular) Bricks of class
designation 7.5
Cement mortar 1:3 (1 cement : 3 coarse sand)
Carriage of bricks
LABOUR:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
Sundries and scaffolding
Extra labour for lifting of material (Above floor two level upto
floor five level)
Coolie

Rate

1000

377.00

2900.00

1000

0.181
377.00

4145.53
233.60

Day
Day
Day
Day
L.S.

0.72
0.72
1.76
0.36
7.15

301.00
273.00
247.00
260.00
1.49

Day

1.29

247.00
Total:
3202.59

Add water charges @ 1% on

Add C.P & OH @15% on

3234.62
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 371.98
Rs 372.00

Item Code: 6.9

B/W in plain arches in s/s for span upto 6 m with bricks in CM 1:3
Code
2602
03.008
2201
9999

05.009.09

9999
0123
0124
0115
0101

0115

Details of Cost for : 1.00 Cum

Unit
Quantity

Description

MATERIALS :
Common burnt clay F.P.S (non modular) Bricks of class 1000
designation 7.5
Cement mortar 1:3 (1 cement : 3 coarse sand)
Carriage of bricks
1000
Sundries
L.S.
Centering and Shuttering:
Taking a semi circular arch 3.6m span,
3.6m long and 0.40m thick
Area of centering =
3.142 x 1.8 x 3.6 = 20.37 sqm.
Brick work in Arch.
3.142x2.00x0.4x3.6 = 9.05cum.
Area per cum.
C/S i/c strutting, propping etc at all level Arches, domes etc
(Rate same as in item 5.9.9
Scaffolding
LABOUR:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
Extra labour for lifting of material (above floor two level upto
floor five level)
Coolie

494.00

2900.00

0.25
494.00
2.73

4145.53
233.60
1.49

2.25

866.70

L.S.

18.85

1.49

Day
Day
Day
Day

0.53
0.53
2.29
0.20

301.00
273.00
247.00
260.00

Day

1.13

247.00
Total:
3817.50

Add water charges @ 1% except on [A] i.e on

DSR-12

Rate

Page 130 of 2298

Add C.P & OH @15% except on [A] i.e on

3855.68
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 6384.11
Rs 6384.10

Item Code: 6.11

Extra for additional cost of centring for arches exceeding 6 m
Code

1197
2204

1225

1034

2302
0112
0114
9999

DSR-12

Description
Centering and shuttering for arches and carved surface
exceeding 6m in span (an average of 8m)
Radius R = 5m 2R-2=4+4
ArcTan (4/3)=53.28
2x53.28=106
Surface area
=2x22/7x5x3.6x106/360=33.3 sqm.
Arc=9.25m
MATERIAL:
Tie-2x8x0.18x0.05 =0.144cum
Struts-2x2.5x0.1x0.1 =0.050cum.
Struts-2x1.77x0.1x0.1 =0.035cum.
Ribs-6x1.54x0.23x0.1 =0.213cum.
Struts-2x1.72x0.1x0.1 =0.034cum.
Total=0.476cum.
For four such frames =0.476x4= 1.904 cum.
laggings-75x3.6x0.125x0.075=2.531 cum.
Tie-2x3.6x0.225x0.038=0.062cum.
Brace-3x2x2.14x0.225x0.038=0.110
Brace-3x4x3.8x0.225x0.038=0.390
Sleepers-4x3.6x0.20x0.15=0.432
Sleepers-2x4x3.6x0.175x0.075=0.378
Vertical post-4x4x3.6x0.15x0.15=1.296
Total =7.103cum.
Qty taken l/8th of qty for cost using once =
7.103/8 = 0.8885 cum (887.90 cudm)
Carriage of wood
Fittings:
3 way straps 50mmxl0mm = 32 Nos.
32 no. @0.50cm each = 16m
Straps-50mmx 10mm = 8 Nos. @0.25cm each = 2m
Total = 18m
18m @ 3.9kg/m = 70.2 kg. = 0.702qtl.
Qty taken l/8th of qty for cost using once =
0.702/8 = 0.0878 qtl.
Bolts 160 Nos. 254 mm long 16mm dia.160x 0.254x 1.58=64.21 kg=0.64qtl.
Qty taken 1/8th of qty for cost using once =
0.64/8 = 0.08 qtl.
Carriage of steel = 0.1342 t
Qty taken 1/8th of qty for cost using once =
0.1342/8 = 0.0168 tonne
LABOUR:
Carpenter 2nd class
Beldar
Sundries
Less Cost of shuttering etc. for an arch exceeding 6 m span i.e.
for an average of 8 m span

Details of Cost for : 33.31 Sqm

Unit
Quantity

Rate

cum

0.8879

25000.00

cum

0.8879

100.11

quint

0.0878

3950.00

quint

0.08

5400.00

tonne

0.0168

77.87

Day
Day
L.S.

28.00
24.00
134.55

273.00
247.00
1.49

Page 131 of 2298

05.009.09

C/S i/c strutting, propping etc at all level Arches, domes etc

-33.31

866.70

Add water charges @ 1% except on [A] i.e on

Total:
36838.99

Add C.P & OH @15% except on [A] i.e on

37207.38
Cost for 33.31 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 417.85
Rs 417.85

Item Code: 6.12.1

Half brick masonry with bricks of class 75 in found & plinth in CM 1:3
Code
2602
03.008
2201
9999
0123
0124
0115
0101

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description

MATERIALS :
Common burnt clay F.P.S (non modular) Bricks of class 1000
designation 7.5
Cement mortar 1:3 (1 cement : 3 coarse sand)
Carriage of bricks
1000
Sundries & Scaffolding
L.S.
LABOUR:
Mason 1 st class
Day
Mason 2nd class
Day
Coolie
Day
Bhishti
Day

Rate

565.00

2900.00

0.28
565.00
13.52

4145.53
233.60
1.49

0.45
0.45
1.55
0.70

301.00
273.00
247.00
260.00
Total:
3774.52

Add water charges @ 1% on

Add C.P & OH @15% on

3812.27
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 438.41
Rs 438.40

Item Code: 6.12.2

Half brick masonry with bricks of class 75 in found & plinth in CM 1:4
Code
2602
03.009
2201
9999
0123
0124
0115
0101

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

MATERIALS :
Common burnt clay F.P.S (non modular) Bricks of class 1000
designation 7.5
Cement mortar 1:4 (1 cement : 4 coarse sand).
Carriage of bricks
1000
Sundries & Scaffolding
L.S.
LABOUR:
Mason 1 st class
Day
Mason 2nd class
Day
Coolie
Day
Bhishti
Day

Rate

565.00

2900.00

0.28
565.00
13.52

3485.41
233.60
1.49

0.45
0.45
1.55
0.70

301.00
273.00
247.00
260.00
Total:
3589.68

Add water charges @ 1% on

Add C.P & OH @15% on

3625.58
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 416.94
Rs 416.95

Page 132 of 2298

Item Code: 6.13.1

H/B masonry in S/S upto floor 5 level CM 1:3
Code
2602
03.008
2201
9999
0123
0124
0115
0101
0115

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

MATERIALS :
Common burnt clay F.P.S (non modular) Bricks of class 1000
designation 7.5
Cement mortar 1:3 (1 cement : 3 coarse sand)
Carriage of bricks
1000
Sundries & Scaffolding
L.S.
LABOUR:
Mason 1st class
Day
Mason 2nd class
Day
Coolie
Day
Bhishti
Day
Extra labour for lifting materials:
Coolie
Day

Rate

565.00

2900.00

0.28
565.00
13.52

4145.53
233.60
1.49

0.60
0.60
2.00
0.70

301.00
273.00
247.00
260.00

1.29

247.00
Total:
4290.40

Add water charges @ 1% on

Add C.P & OH @15% on

4333.30
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 498.33
Rs 498.35

Item Code: 6.13.2

H/B masonry in S/S upto floor 5 level CM 1:4
Code
2602
03.009
2201
9999
0123
0124
0115
0101
0115

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

MATERIALS :
Common burnt clay F.P.S (non modular) Bricks of class 1000
designation 7.5
Cement mortar 1:4 (1 cement : 4 coarse sand).
Carriage of bricks
1000
Sundries & Scaffolding
L.S.
LABOUR:
Mason 1st class
Day
Mason 2nd class
Day
Coolie
Day
Bhishti
Day
Extra labour for lifting materials:
Coolie
Day

Rate

565.00

2900.00

0.28
565.00
13.52

3485.41
233.60
1.49

0.60
0.60
2.00
0.70

301.00
273.00
247.00
260.00

1.29

247.00
Total:
4105.56

Add water charges @ 1% on

Add C.P & OH @15% on

4146.62
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 476.86
Rs 476.85

Item Code: 6.14

Extra for H/B work in SS above floor 5 level
Code

DSR-12

Description

Details of Cost for : 59.83 Sqm

Unit
Quantity

Rate

Page 133 of 2298

0037
1235

Details of cost for 59.83 sqm per four floors

Mobile crane.
Fuel consumption per hour = 8 litre.
Diesel oil

per d

0.125

6500.00

litre

8.00

41.29
Total:
1142.82

Add water charges @ 1% on

Add C.P & OH @15% on

1154.25
Cost for 59.83 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 22.19
Rs 22.20

Item Code: 6.15

Extra for provdng -placing 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry ....
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
(a) 6mm dia. M.S. bars (round) 2 Nos. @ 30 meter/10sqm. =
60 metre @ 0.22kg/m =13.2kg
1002
2205
9999

MS round bars 12mm dia and below

Carraige of Steel
Sundries

quint
tonne
L.S.

0.132
0.0132
1.82

Add water charges @ 1% on

Rate

4100.00
77.87
1.49
Total:
544.94

Add C.P & OH @15% on

550.39
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 63.30
Rs 63.30

Item Code: 6.16.1

Tile brick masonry with tile bricks of class 100 in found & plinth CM 1:4
Code
1984
03.009
2207
9999
0123
0124
0115
0101

Description
MATERIALS :
Common burnt clay FPS brick tile class 10
Cement mortar 1:4 (1 cement : 4 coarse sand).
(Rate as per item no. 3.9)
Carriage or brick tiles
Sundries
LABOUR:
Mason 1st class
Mason 2nd class
Coolie
Bhishti

Details of Cost for : 1.00 Cum

Unit
Quantity

Rate

1000

777.00
0.40

3100.00
3485.41

1000
L.S.

777.00
4.55

140.16
1.49

0.70
0.70
1.54
0.20

301.00
273.00
247.00
260.00
Total:
4752.72

Day
Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

4800.25
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5520.29
Rs 5520.30

Item Code: 6.16.2

DSR-12

Page 134 of 2298

Tile brick masonry with tile bricks of class 100 in found & plinth CM 1:6
Code
1984
03.011
2207
9999
0123
0124
0115
0101

Description
MATERIALS :
Common burnt clay FPS brick tile class 10
Cement mortar 1:6 (1 cement : 6 coarse sand).
Carriage or brick tiles
Sundries
LABOUR:
Mason 1st class
Mason 2nd class
Coolie
Bhishti

Details of Cost for : 1.00 Cum

Unit
Quantity
1000
1000
L.S.
Day
Day
Day
Day

Rate

777.00
0.40
777.00
4.55

3100.00
2825.29
140.16
1.49

0.70
0.70
1.54
0.20

301.00
273.00
247.00
260.00
Total:
4488.68

Add water charges @ 1% on

Add C.P & OH @15% on

4533.57
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5213.61
Rs 5213.60

Item Code: 6.17

Tile brick masonry with machine moulded tile bricks designation 125 in found & plinth in CM 1:6
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Details of cost for 1 cum.
MATERIALS
7904
Machine moulded common burnt clay tile bricks of class 1000
777.00
designation 12.5
designation 125
2207
Carriage of Brick tiles
1000
777.00
03.011
Cement mortar 1:6 (1 cement : 6 coarse sand).
0.40
(Rates as per item no. 3.11)
9999
Sundries
L.S.
4.55
LABOUR:
0123
Mason 1st Class
Day
0.70
0124
Mason Ilnd Class
Day
0.70
0115
Coolie
Day
1.54
0101
Bhishti
Day
0.20
Add water charges @ 1% on

Rate

3700.00

140.16
2825.29
1.49
301.00
273.00
247.00
260.00
Total:
4954.88

Add C.P & OH @15% on

5004.43
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5755.09
Rs 5755.10

Item Code: 6.18

Tile brick masonry with machine moulded tile bricks designation 125 in S/S upto floor 5 level in CM 1:6
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS :
1984
Common burnt clay FPS brick tile class 10
1000
777.00
2207
Carriage of Brick tiles
1000
777.00
03.011
Cement mortar 1:6 (1 cement : 6 coarse sand).
0.40
sand).(Rate as item no. 3.11)

DSR-12

Rate
3100.00
140.16
2825.29

Page 135 of 2298

9999
0123
0124
0115
0101
0115
9999

Sundries
LABOUR:
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti
Extra labour for lifting of materials
Coolie
Cost of scaffolding

L.S.

4.55

1.49

Day
Day
Day
Day

0.90
0.90
1.80
0.20

301.00
273.00
247.00
260.00

Day
L.S.

1.13
33.80

247.00
1.49
Total:
4997.17

Add water charges @ 1% on

Add C.P & OH @15% on

5047.14
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5804.21
Rs 5804.20

Item Code: 6.20

Tile brick masonry with tile bricks of class 100 in plain arch work in SS in CM 1:4
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS
1984
Common burnt clay FPS brick tile class 10
1000
777.00
2207
Carriage of Brick tiles
1000
777.00
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.35
9999
Sundries
L.S.
5.46
Centering and shuttering
05.009.09 C/S i/c strutting, propping etc at all level Arches, domes etc
2.25

9999
0123
0124
0115
0101

0115

Rate as per item no. 5.9.9

Scaffolding
LABOUR:
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti
Extra labour for lifting material (Above floor two level and
upto floor five level)
Coolie

Rate
3100.00
140.16
3485.41
1.49
866.70

L.S.

18.85

1.49

Day
Day
Day
Day

0.79
0.79
3.21
0.20

301.00
273.00
247.00
260.00

Day

1.13

247.00
Total:
5351.16

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

5404.67
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 8165.45
Rs 8165.45

Item Code: 6.21

Tile brick masonry with tile bricks of class 100 in gauged arch work in SS CM 1:4
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS
1984
Common burnt clay FPS brick tile class 10
1000
791.00
2207
Carriage of tiles Brick
1000
791.00
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.35

DSR-12

Rate
3100.00
140.16
3485.41

Page 136 of 2298

9999

Sundries and shuttering

Centering and shuttering
Area same as in item no 6.9
C/S i/c strutting, propping etc at all level Arches, domes etc

L.S.

0123
0124
0115
0101

Scaffolding
LABOUR:
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti
Extra labour for lifting material (Above floor two level and
upto floor five level)

0115

Coolie

05.009.09
9999

5.46

1.49

2.25

866.70

L.S.

18.85

1.49

Day
Day
Day
Day

1.50
1.50
5.33
0.20

301.00
273.00
247.00
260.00

Day

1.13

247.00
Total:
6327.71

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

6390.99
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 9299.72
Rs 9299.70

Item Code: 6.22

Tile brick masonry work 5 cm thick with tile brick of class 100 in CM 1:3 in SS
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS:
1984
Common burnt clay FPS brick tile class 10
1000
377.00
2207
Carriage of tile bricks
1000
377.00
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.15
9999
Sundries and scaffolding
L.S.
8.06
LABOUR:
0123
Mason 1st class
Day
0.94
0124
Mason 2nd class
Day
0.94
0115
Coolie
Day
1.88
0101
Bhishti
Day
0.33
Extra labour for lifting material (Above floor two level and
upto floor five level)
0115

Coolie

Day

1.29

Add water charges @ 1% on

Rate
3100.00
140.16
4145.53
1.49
301.00
273.00
247.00
260.00

247.00
Total:
3263.73

Add C.P & OH @15% on

3296.37
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 379.08
Rs 379.10

Item Code: 6.23

Honey-comb B/W 10/11.2 cm with in CM 1:4
Code

DSR-12

Description
Details of cost for 1sqm. of Honey comb brick worksMATERIALS:

Details of Cost for : 1.00 Sqm

Unit
Quantity

Rate

Page 137 of 2298

(1) Brick work, with bricks of class designation 75, in cement

mortar 1:4 (1 Cement: 4 Coarse sand) in superstructure
06.004.01

9999

Brick work with FPS bricks of class designation 75 in super

structure above plinth level u
Rate as per item no 6.4.1
(A) (2) Extra for delay due to fine work
L.S.

0.069

4067.84

20.67

1.49
Total:
30.80

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

31.11
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 316.46
Rs 316.45

Item Code: 6.24

Extra for laying BW in or under water and/or liquid mud i/c cost of pumping
Code

0011
0114

Description
Details of cost for depth of water 0.30m.
Quantity of concrete = 14 cum.
Pumping hours = 3 hrs. or 0.375 days.
Hire charge of pump set of capacity 4000 ltr/hr.
Beldar for cleaning slush

Details of Cost for : 4.20 Cum

Unit
Quantity

Day
Day

0.375
4.00

Add water charges @ 1% on

Rate

500.00
247.00
Total:
1175.50

Add C.P & OH @15% on

1187.26
Cost for 4.20 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 325.08
Rs 325.10

Item Code: 6.25

Extra for BW in or under foul position.
Code
0123
0124
0114
0115

Description
Extra labour due to slow progressMason 1st class
Mason 2nd class
Beldar
Coolie

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day
Day
Day

0.02
0.02
0.25
0.15

Add water charges @ 1% on

Rate
301.00
273.00
247.00
247.00
Total:
110.28

Add C.P & OH @15% on

111.38
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 128.09
Rs 128.10

Item Code: 6.26.1

Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including
making grooves in CM 1:6 (1 cement : 6 coarse sand) - From ground level upto plinth level
Details of Cost for : 1.00 Cum

DSR-12

Page 138 of 2298

Code

2201
03.011
9999

Description
MATERIALS:
Common burnt clay F.P.S. (non modular) bricks class
designation7.5
Carraige of Bricks
Cement mortar 1:6 (1 cement : 6 coarse sand).
Sundries including steel / wooden strips for making grooves

0114
0123
0124
0115
0101

LABOUR:
Beldar (For selection of bricks)
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Coolie
Bhisti

2602

Unit

Quantity

Rate

1000

494.00

2900.00

1000
Cum
L.S.

494.00
0.25
16.38

233.60
2825.29
1.49

0.50
0.35
0.35
1.07
0.20

247.00
301.00
273.00
247.00
260.00
Total:
2919.42

Day
Day
Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

2948.61
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3390.90
Rs 3390.90

Item Code: 6.26.2

Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including
making grooves in CM 1:6 (1 cement : 6 coarse sand) - Above plinth level upto floor V level

Code
2602
2201
03.011
9999

0114
0123
0124
0115
0101

0115
9999

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Common burnt clay F.P.S. (non modular) bricks class
designation7.5
Carraige of Bricks
Cement mortar 1:6 (1 cement : 6 coarse sand).
Sundries including steel / wooden strips for making grooves

Rate

1000

494.00

2900.00

1000
Cum
L.S.

494.00
0.25
16.38

233.60
2825.29
1.49

0.50
0.46
0.46
1.60
0.20

247.00
301.00
273.00
247.00
260.00

1.13
22.36

247.00
1.49
Total:
3425.90

LABOUR:
Beldar (For selection of bricks)
Day
Mason (brick layer) 1st class
Day
Mason (brick layer) 2nd class
Day
Coolie
Day
Bhisti
Day
Extra labour element required for lifting of material (avove
floor two level and upto floor five level)
Coolie
Day
Sundries
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

3460.16
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3979.18
Rs 3979.20

Item Code: 6.27.1

DSR-12

Page 139 of 2298

Brick work with common burnt clay selected modular bricks of class designation 7.5 in exposed brick work including making
grooves in CM 1:6 (1 cement : 6 coarse sand) - From ground level upto plinth level

Code

Details of Cost for : 1.00 Cum

Unit
Quantity

Description

7900
2201
03.011
9999

MATERIALS:
Common burnt Modular bricks of class designation 7.5
Carraige of Bricks
Cement mortar 1:6 (1 cement : 6 coarse sand).
Sundries including steel / wooden strips for making grooves

1000
1000
Cum
L.S.

0123
0124
0115
0101

LABOUR:
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Coolie
Bhisti

Day
Day
Day
Day

Rate

487.00
487.00
0.22
16.38

3150.00
233.60
2825.29
1.49

0.33
0.33
1.00
0.18

301.00
273.00
247.00
260.00
Total:
2777.00

Add water charges @ 1% on

Add C.P & OH @15% on

2804.77
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3225.49
Rs 3225.50

Item Code: 6.27.2

Brick work with common burnt clay selected Modular bricks of class designation 7.5 in exposed brick work including making
grooves in CM 1:6 (1 cement : 6 coarse sand) - Above plinth level upto floor V level

Code

Details of Cost for : 1.00 Cum

Unit
Quantity

Description

Rate

7900

MATERIALS:
Common burnt clay Modular bricks of class designation 7.5

1000

487.00

3150.00

2201
03.011
9999

Carraige of Bricks
Cement mortar 1:6 (1 cement : 6 coarse sand).
Sundries including steel / wooden strips for making grooves

1000
Cum
L.S.

487.00
0.22
16.38

233.60
2825.29
1.49

0.44
0.44
1.43
0.18

301.00
273.00
247.00
260.00

1.13
22.36

247.00
1.49
Total:
3258.78

0123
0124
0115
0101

0115
9999

LABOUR:
Mason (brick layer) 1st class
Day
Mason (brick layer) 2nd class
Day
Coolie
Day
Bhisti
Day
Extra labour element required for lifting of material (avove
floor two level and upto floor five level)
Coolie
Day
Sundries
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

3291.37
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3785.08
Rs 3785.10

Item Code: 6.28.1

DSR-12

Page 140 of 2298

Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 in exposed brick work including
making grooves in CM 1:6 (1 cement : 6 coarse sand) - From ground level upto plinth level

Code

Details of Cost for : 1.00 Cum

Unit
Quantity

Description

Rate

1986

MATERIALS:
Common burnt clay modular bricks class designation 12.5

1000

487.00

3600.00

2201
03.011
9999

Carraige of Bricks
Cement mortar 1:6 (1 cement : 6 coarse sand).
Sundries including steel / wooden strips for making grooves

1000
Cum
L.S.

487.00
0.22
16.38

233.60
2825.29
1.49

0123
0124
0115
0101

LABOUR:
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Coolie
Bhisti

Day
Day
Day
Day

0.33
0.33
1.00
0.18

301.00
273.00
247.00
260.00
Total:
2996.15

Add water charges @ 1% on

Add C.P & OH @15% on

3026.11
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3480.03
Rs 3480.05

Item Code: 6.28.2

Brick work with common burnt clay machine moulded Modular bricks of class designation 12.5 in exposed brick work including
making grooves in CM 1:6 (1 cement : 6 coarse sand) - Above plinth level upto floor V level.

Code

Details of Cost for : 1.00 Cum

Unit
Quantity

Description

Rate

1986

MATERIALS:
Common burnt clay modular bricks class designation 12.5

1000

487.00

3600.00

2201
03.011
9999

Carraige of Bricks
Cement mortar 1:6 (1 cement : 6 coarse sand).
Sundries including steel / wooden strips for making grooves

1000
Cum
L.S.

487.00
0.22
16.38

233.60
2825.29
1.49

0.44
0.44
1.43
0.18

301.00
273.00
247.00
260.00

1.13
22.36

247.00
1.49
Total:
3477.93

0123
0124
0115
0101

0115
9999

LABOUR:
Mason (brick layer) 1st class
Day
Mason (brick layer) 2nd class
Day
Coolie
Day
Bhisti
Day
Extra labour element required for lifting of material (avove
floor two level and upto floor five level)
Coolie
Day
Sundries
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

3512.71
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4039.62
Rs 4039.60

Item Code: 6.29.1

DSR-12

Page 141 of 2298

Brick work with common burnt clay machine moulded F.P.S non-modular bricks of class designation 12.5 in exposed brick work
including making grooves in CM 1:6 (1 cement : 6 coarse sand) - From G.L upto plinth level

Code

Details of Cost for : 1.00 Cum

Unit
Quantity

Description

2201
03.011
9999

MATERIALS:
Machine moulded common burnt clay F.P.S. (non modular)
bricks of class designation 12.5
Carraige of Bricks
Cement mortar 1:6 (1 cement : 6 coarse sand).
Sundries including steel / wooden strips for making grooves

0123
0124
0115
0101

LABOUR:
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Coolie
Bhisti

7903

Rate

1000

494.00

3550.00

1000
Cum
L.S.

494.00
0.25
16.38

233.60
2825.29
1.49

0.36
0.36
1.37
0.20

301.00
273.00
247.00
260.00
Total:
3196.86

Day
Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

3228.83
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3713.15
Rs 3713.15

Item Code: 6.29.2

Brick work with common burnt clay machine moulded FPS Non-Modular bricks of class designation 12.5 in exposed brick work
including making grooves in CM 1:6 (1 cement : 6 coarse sand) - Above plinth level upto floor V level.

Code
7903
2201
03.011
9999

0123
0124
0115
0101

0115
9999

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Machine moulded common burnt clay F.P.S. (non modular)
bricks of class designation 12.5
Carraige of Bricks
Cement mortar 1:6 (1 cement : 6 coarse sand).
Sundries including steel / wooden strips for making grooves

Rate

1000

494.00

3550.00

1000
Cum
L.S.

494.00
0.25
16.38

233.60
2825.29
1.49

0.44
0.44
1.80
0.20

301.00
273.00
247.00
260.00

1.13
22.36

247.00
1.49
Total:
3661.42

LABOUR:
Mason (brick layer) 1st class
Day
Mason (brick layer) 2nd class
Day
Coolie
Day
Bhisti
Day
Extra labour element required for lifting of material (avove
floor two level and upto floor five level)
Coolie
Day
Sundries
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

3698.03
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4252.73
Rs 4252.75

Item Code: 6.30.1

DSR-12

Page 142 of 2298

Brick work with common burnt clay machine moulded perforated F.P.S non-modular bricks of class designation 12.5 in exposed
brick work including making grooves in CM 1:6 (1 cement : 6 coarse sand) - From G.L upto plinth level

Code

Details of Cost for : 1.00 Cum

Unit
Quantity

Description

2201
03.011
9999

MATERIALS:
Machine moulded perforated FPS (non modular) bricks of
class designation 12.5
Carraige of Bricks
Cement mortar 1:6 (1 cement : 6 coarse sand).
Sundries including steel / wooden strips for making grooves

0123
0124
0115
0101

LABOUR:
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Coolie
Bhisti

7901

Rate

1000

494.00

4150.00

1000
Cum
L.S.

494.00
0.25
16.38

233.60
2825.29
1.49

0.36
0.36
1.37
0.20

301.00
273.00
247.00
260.00
Total:
3493.26

Day
Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

3528.19
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4057.42
Rs 4057.40

Item Code: 6.30.2

Brick work with common burnt clay machine moulded perforated FPS Non-Modular bricks of class 12.5 in exposed brick work
including making grooves in CM 1:6 (1 cement : 6 coarse sand) - Above plinth level upto floor V level.

Code
7901
2201
03.011
9999

0123
0124
0115
0101

0115
9999

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Machine moulded perforated FPS (non modular) bricks of
class designation 12.5
Carraige of Bricks
Cement mortar 1:6 (1 cement : 6 coarse sand).
Sundries including steel / wooden strips for making grooves

Rate

1000

494.00

4150.00

1000
Cum
L.S.

494.00
0.25
16.38

233.60
2825.29
1.49

0.47
0.47
1.80
0.20

301.00
273.00
247.00
260.00

1.13
22.36

247.00
1.49
Total:
3975.04

LABOUR:
Mason (brick layer) 1st class
Day
Mason (brick layer) 2nd class
Day
Coolie
Day
Bhisti
Day
Extra labour element required for lifting of material (avove
floor two level and upto floor five level)
Coolie
Day
Sundries
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

4014.79
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4617.01
Rs 4617.00

Item Code: 6.31.1

DSR-12

Page 143 of 2298

Brick work with common burnt clay machine moulded perforated modular bricks of class designation 12.5 in exposed brick work
including making grooves in CM 1:6 (1 cement : 6 coarse sand) - From G.L upto plinth level

Code

Details of Cost for : 1.00 Cum

Unit
Quantity

Description

2201
03.011
9999

MATERIALS:
Machine moulded modular perforated bricks of class
designation 12.5
Carraige of Bricks
Cement mortar 1:6 (1 cement : 6 coarse sand).
Sundries including steel / wooden strips for making grooves

0123
0124
0115
0101

LABOUR:
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Coolie
Bhisti

7902

Rate

1000

487.00

3800.00

1000
Cum
L.S.

487.00
0.22
16.38

233.60
2825.29
1.49

0.33
0.33
1.00
0.18

301.00
273.00
247.00
260.00
Total:
3093.55

Day
Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

3124.49
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3593.16
Rs 3593.15

Item Code: 6.31.2

Brick work with common burnt clay machine moulded perforated Modular bricks of class 12.5 in exposed brick work including
making grooves in CM 1:6 (1 cement : 6 coarse sand) - Above plinth level upto floor V level.

Code
7902
2201
03.011
9999

0123
0124
0115
0101

0115
9999

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Machine moulded modular perforated bricks of class
designation 12.5
Carraige of Bricks
Cement mortar 1:6 (1 cement : 6 coarse sand).
Sundries including steel / wooden strips for making grooves

Rate

1000

487.00

3800.00

1000
Cum
L.S.

487.00
0.22
16.38

233.60
2825.29
1.49

0.44
0.44
1.43
0.18

301.00
273.00
247.00
260.00

1.13
22.36

247.00
1.49
Total:
3575.33

LABOUR:
Mason (brick layer) 1st class
Day
Mason (brick layer) 2nd class
Day
Coolie
Day
Bhisti
Day
Extra labour element required for lifting of material (avove
floor two level and upto floor five level)
Coolie
Day
Sundries
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

3611.08
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4152.74
Rs 4152.75

Item Code: 6.32.1

DSR-12

Page 144 of 2298

B/W with clay flyash with bricks in S/S above PL upto floor 5 level in CM 1:4
Code
7008
03.009
2201
9999
0123
0124
0115
0101
9999

0115

Details of Cost for : 1.00 Cum

Unit
Quantity

Description

MATERIALS :
F.P.S (non modular) Clay flyash bricks of class designation 7.5 1000

Rate

494.00

3000.00

Cement mortar 1:4 (1 cement : 4 coarse sand).

(Rate as per item no 3.11)
Carriage of bricks
Sundries
LABOUR:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
Scaffolding
Extra labour element required for lifting of materials above
floor two level upto floor V level (0.75 x 1.5 = 1.13)

Cum

0.25

3485.41

1000
L.S.

494.00
2.75

233.60
1.49

Day
Day
Day
Day
L.S.

0.47
0.47
1.80
0.20
8.97

301.00
273.00
247.00
260.00
1.49

Coolie

Day

1.13

247.00
Total:
3531.71

Add water charges @ 1% on

Add C.P & OH @15% on

3567.03
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4102.08
Rs 4102.05

Item Code: 6.32.2

Brick work with clay flyash F.P.S. bricks - cls design. 75 in superstructure above plinth level up to floor 5 level in : CM 1:6 (1 cement :
6 coarse sand)
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS :
7008
F.P.S (non modular) Clay flyash bricks of class designation 7.5 1000
494.00
3000.00
03.011
2201
9999
0123
0124
0115
0101
9999

0115

Cement mortar 1:6 (1 cement : 6 coarse sand).

(Rate as per item no 3.11)
Carriage of bricks
1000
Sundries
L.S.
LABOUR:
Mason 1st class
Day
Mason 2nd class
Day
Coolie
Day
Bhishti
Day
Scaffolding
L.S.
Extra labour element required for lifting of materials above
floor two level upto floor V level (0.75x1.5= 1.13)
Coolie
Day

0.25

2825.29

494.00
2.73

233.60
1.49

0.47
0.47
1.80
0.20
8.97

301.00
273.00
247.00
260.00
1.49

1.13

247.00
Total:
3366.65

Add water charges @ 1% on

Add C.P & OH @15% on

3400.32
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

DSR-12

Rs 3910.37
Rs 3910.35

Page 145 of 2298

Item Code: 6.34.1

B/W with fly ash lime bricks of class 100 in in SS above PL to floor 5 level in CM 1:4
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS:
7737
Fly ash lime bricks (FALG bricks) conforming to IS 12894
1000
487.00
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.22
(Rate as per Item No. 3.9)
2201
Carriage of bricks
1000
487.00
9999
Sundries
L.S.
2.73
LABOUR:
0123
Mason 1st class
Day
0.47
0124
Mason 2nd class
Day
0.47
0115
Coolie
Day
1.80
0101
Bhishti
Day
0.20
9999
Scaffolding
L.S.
22.36
Extra labour element required for lifting of materials above
floor two level upto floor V level (0.75x1.5 =1.13)
0115
Coolie
Day
1.13
Add water charges @ 1% on

Rate
3300.00
3485.41
233.60
1.49
301.00
273.00
247.00
260.00
1.49

247.00
Total:
3570.53

Add C.P & OH @15% on

3606.24
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4147.18
Rs 4147.20

Item Code: 6.34.2

B.W with modular fly ash lime bricks CLS desg 100 in super structure above plinth up to floor V level in : CM 1:6 -Coarse sand

Code
7737
03.011
2201
9999
0123
0124
0115
0101
9999

0115

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS :
Fly ash lime bricks (FALG bricks) conforming to IS 12894
Cement mortar 1:6 (1 cement : 6 coarse sand).
Rate as per Item No. 3.11
Carriage of bricks
Sundries
LABOUR:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
Scaffolding
Extra labour element required for lifting of materials above
floor two level upto floor V level
Coolie (0.75x1.5= 1.13)

Rate

1000

487.00
0.22

3300.00
2825.29

1000
L.S.

487.00
2.73

233.60
1.49

Day
Day
Day
Day
L.S.

0.47
0.47
1.80
0.20
22.36

301.00
273.00
247.00
260.00
1.49

Day

1.13

247.00
Total:
3425.30

Add water charges @ 1% on

Add C.P & OH @15% on

3459.55
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

DSR-12

Rs 3978.48
Rs 3978.50

Page 146 of 2298

Item Code: 6.35.1

B/W with calcium silicate bricks machine moulded of class designation 100 in in SS above PL to floor 5 level in CM 1:4

Code
7738
03.009
2201
9999
0123
0124
0115
0101
9999

0115

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS :
Calcium silicate bricks machine moulded conforming to I.S
4139
Cement mortar 1:4 (1 cement : 4 coarse sand).
(Rate as per item No 3.9)
Carriage of bricks
Sundries
LABOUR:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
Scaffolding
Extra labour element required for lifting of materials above
floor two level upto floor V level
Coolie (0.7 x 1.5 = 1.13)

1000

Rate

487.00

3600.00

0.22

3485.41

1000
L.S.

487.00
2.73

233.60
1.49

Day
Day
Day
Day
L.S.

0.47
0.47
1.80
0.20
22.36

301.00
273.00
247.00
260.00
1.49

Day

1.13

247.00
Total:
3716.63

Add water charges @ 1% on

Add C.P & OH @15% on

3753.80
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4316.87
Rs 4316.85

Item Code: 6.35.2

B/W with calcium silicate bricks machine moulded of class designation 100 in in SS above PL to floor 5 level in CM 1:6

Code
7738
03.011
2201
9999
0123
0124
0115
0101
9999

0115

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Calcium Silicate Bricks machine moulded confirming to I.S.
4139 Cement mortar 1:6 (1 cement : 6 coarse sand).
Carraige of Bricks
Sundries
LABOUR:
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Coolie
Bhisti
Scaffolding
Extra labour element required for lifting of materials above
floor two level and up to floor V level
Coolie (0.75x1.5=1.13)

Rate

1000

487.00

3600.00

Cum
1000
L.S.

0.22
487.00
2.73

2825.29
233.60
1.49

Day
Day
Day
Day
L.S.

0.47
0.47
1.80
0.20
22.36

301.00
273.00
247.00
260.00
1.49

Day

1.13

247.00
Total:
3571.40

Add water charges @ 1% on

Add C.P & OH @15% on

3607.11
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

DSR-12

Rs 4148.18
Rs 4148.20

Page 147 of 2298

Item Code: 6.36.1

B/W extruded burnt flyash clay sewer bricks in found and plinth CM 1:4
Code
7736
03.009
2201
9999
0123
0124
0115
0101

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS :
Extruded burnt flyash clay sewer bricks
Cement mortar 1:4 (1 cement : 4 coarse sand).
(Rate as per item No. 3.9)
Carriage of bricks
Sundries
LABOUR:
Mason 1st class
Mason 2nd class
Coolie
Bhishti

Rate

1000

487.00
0.22

3900.00
3485.41

1000
L.S.

487.00
2.73

233.60
1.49

0.33
0.33
1.00
0.18

301.00
273.00
247.00
260.00
Total:
3267.14

Day
Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

3299.81
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3794.78
Rs 3794.80

Item Code: 6.37

B/W with modular extruded burnt fly ash clay sewer in arches in found and plinth in CM 1:3
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS :
7736
Extruded burnt flyash clay sewer bricks
1000
487.00
03.003
Cement mortar 1:3 (1 cement : 3 fine sand)
0.25
(Rate as per item No. 3.3)
2201
Carriage of bricks
1000
487.00
9999
Sundries
L.S.
2.73
Centering and shuttering
05.009.09 C/S i/c strutting, propping etc at all level Arches, domes etc
2.25

0123
0124
0115
0101

LABOUR:
Mason 1st class
Mason 2nd class
Coolie
Bhishti

Day
Day
Day
Day

0.42
0.42
1.86
0.20

Add water charges @ 1% except on [A] i.e on

Rate
3900.00
3631.93
233.60
1.49
866.70

301.00
273.00
247.00
260.00
Total:
3677.61

Add C.P & OH @15% except on [A] i.e on

3714.39
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 6221.63
Rs 6221.65

Item Code: 6.38

P/L AAC blocks masonry with 100 mm AAC blocks in S/S above PL upto floor 5 level in CM 1:4
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS :
8655
Autoclaved aerated cement (AAC) blocks.
cum
1.00

DSR-12

Rate
2025.00

Page 148 of 2298

03.009
2208
9999
0123
0124
0115
0101
05.022.01

Cement mortar 1:4 (1 cement : 4 coarse sand).

(Rate as per Item No. 3.9)
Carriage of AAC blocks
Sundries
LABOUR:
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti
Reinforcement bars
Reinforcement for R.C.C. work all complete. -Upto plinth level
Mild steel and Medium Tensi

0.15

3485.41

cum
L.S.

1.00
2.73

87.60
1.49

Day
Day
Day
Day

0.36
0.36
1.37
0.20

301.00
273.00
247.00
260.00

13.20

56.77

Add water charges @ 1% except on [A] i.e on

Total:
3236.51

Add C.P & OH @15% except on [A] i.e on

3268.88
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4508.57
Rs 4508.30

Item Code: 6.40

P/L Gypsum panel partitions 100 mm thick with water proof in SS above PL upto floor 5 level
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIAL
8656
Gypsum panel 666 X 500 X 100 mm size.
sqm
10.00
8657
Bonding plaster for Gypsum panel.
kg
25.00
9999
Sundries & scaffolding
L.S.
13.52
LABOUR
0123
Mason (brick layer) 1st class
Day
0.50
0114
Beldar
Day
1.00
Add water charges @ 1% on

Rate
455.00
53.00
1.49
301.00
247.00
Total:
6292.64

Add C.P & OH @15% on

6355.57
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 730.89
Rs 730.90

Item Code: 6.41

Extra for Gypsum panel partitions in SS above floor 5 level
Code

0115

Details of Cost for : 10.00 Sqm

Description
Unit
Quantity
Details of cost for 10 sqm. per four floor
Extra labour element for lifting of materials above floor V
level.
Coolie
Day
1.73
Add water charges @ 1% on

Rate

247.00
Total:
427.31

Add C.P & OH @15% on

431.58
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 49.63
Rs 49.65

Page 149 of 2298

Item Code: 6.42.1

B/W with mechanized autoclave flyash lime bricks class designation 100 in SS above PL level upto floor 5 level in CM 1:4

Code
8658
03.009
2201
9999
0123
0124
0115
0101

0115
9999

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS
Mechanised Autoclaved flyash lime bricks.
Cement mortar 1:4 (1 cement : 4 coarse sand).
(Rate as per item no 3.9)
Carriage of Bricks
Sundries
LABOUR:
Mason 1st class
Mason 2nd class
Coolie
Bhisti
Extra labour for lifting material (Above floor two level and
upto floor five level)
Coolie
Sundries

Rate

1000

494.00
0.25

4300.00
3485.41

1000
L.S.

494.00
2.73

233.60
1.49

Day
Day
Day
Day

0.47
0.47
1.80
0.20

301.00
273.00
247.00
260.00

Day
L.S.

1.13
22.36

247.00
1.49
Total:
4193.83

Add water charges @ 1% on

Add C.P & OH @15% on

4235.77
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4871.14
Rs 4871.10

Item Code: 6.42.2

B/W with mechanized autoclave flyash lime bricks class designation 100 in SS above PL level upto floor 5 level in CM 1:6

Code
8658
03.011
2201
9999
0123
0124
0115
0101

0115
9999

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS
Mechanised Autoclaved flyash lime bricks.
Cement mortar 1:6 (1 cement : 6 coarse sand).
(Rate as per item no 3.11)
Carriage of Bricks
Sundries
LABOUR:
Mason 1st class
Mason 2nd class
Coolie
Bhisti
Extra labour for lifting material (Above floor two level and
upto floor five level)
Coolie
Sundries

Rate

1000

494.00
0.25

4300.00
2825.29

1000
L.S.

494.00
2.73

233.60
1.49

Day
Day
Day
Day

0.47
0.47
1.80
0.20

301.00
273.00
247.00
260.00

Day
L.S.

1.13
22.36

247.00
1.49
Total:
4028.80

Add water charges @ 1% on

Add C.P & OH @15% on

4069.09
Cost for 1.00 Cum
Rate per One Cum:

DSR-12

Rs 4679.45

Page 150 of 2298

Rate as per DSR-12:

Rs 4679.45

Item Code: 6.44

Brick edging 7cm wide 11.4cm deep to plinth protection
Code
9999

2602
2201
03.004
0155
0114
0101
9999

Description
Details of cost for 10m length
Excavation and disposal of surplus earth 2nd class bricks = 42
nos. +
Add wastage @ 10% = 4.2 nos.
= 46.2 nos.
Say 46.00 nos.
Common burnt clay F.P.S (non modular) Bricks of class
designation 7.5
Carriage of bricks
Cement mortar 1:4 (1 cement : 4 fine sand)
LABOUR
Mason
Beldar
Bhisti
Sundries

Details of Cost for : 10.00 m

Unit
Quantity

Rate

L.S.

2.73

1.49

1000

46.00

2900.00

1000

46.00
0.0036

233.60
2971.81

0.10
0.10
0.03
2.73

287.00
247.00
260.00
1.49
Total:
224.19

Day
Day
Day
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

226.43
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 26.04
Rs 26.05

Item Code: 6.45.1

Half brick masonry with non modular fly ash lime Gypsum bricks (FALG bricks) class designation 10, conforming to IS : 12894, in
super structure above plinth and upto floor V level. - CM 1 : 3 (1 cement : 3 coarse sand)

Code
7737
2201
03.008
9999
0123
0124
0115
0101

0115

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

MATERIALS:
Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894- 1000
1989
Carraige of Bricks
1000
Cement mortar 1:3 (1 cement : 3 coarse sand)
Cum
Sundries & Scaffolding
L.S.
LABOUR:
Mason (brick layer) 1st class
Day
Mason (brick layer) 2nd class
Day
Coolie
Day
Bhisti
Day
Extra labour element required for lifting of material (above
floor two level upto floor five level)
Coolie
Day

Rate

565.00

3300.00

565.00
0.28
13.52

233.60
4145.53
1.49

0.60
0.60
2.00
0.70

301.00
273.00
247.00
260.00

1.29

247.00
Total:
4516.40

Add water charges @ 1% on

Add C.P & OH @15% on

4561.56
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 524.58
Rs 524.60

Page 151 of 2298

Item Code: 6.45.2

Half brick masonry with non modular fly ash lime Gypsum bricks (FALG bricks) class designation 10, conforming to IS : 12894, in
super structure above plinth and upto floor V level. - CM 1 : 4 (1 cement : 4 coarse sand)

Code
7737
2201
03.009
9999
0123
0124
0115
0101

0115

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

MATERIALS:
Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894- 1000
1989
Carraige of Bricks
1000
Cement mortar 1:4 (1 cement : 4 coarse sand).
Cum
Sundries & Scaffolding
L.S.
LABOUR:
Mason (brick layer) 1st class
Day
Mason (brick layer) 2nd class
Day
Coolie
Day
Bhisti
Day
Extra labour element required for lifting of material (above
floor two level upto floor five level)
Coolie
Day

Rate

565.00

3300.00

565.00
0.28
13.52

233.60
3485.41
1.49

0.60
0.60
2.00
0.70

301.00
273.00
247.00
260.00

1.29

247.00
Total:
4331.56

Add water charges @ 1% on

Add C.P & OH @15% on

4374.88
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 503.11
Rs 503.10

Item Code: 6.46.1

Half brick masonry with non modular mechanised auto claved fly ash sand lime bricks class designation 10, in SS above plinth and
upt floor V level.. - CM 1 : 3 (1 cement : 3 coarse sand)

Code
8658
2201
03.008
9999
0123
0124
0115
0101

0115

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

MATERIALS:
Mechanised Autoclaved fly ash sand lime non modular bricks. 1000
Carraige of Bricks
1000
Cement mortar 1:3 (1 cement : 3 coarse sand)
Cum
Sundries & Scaffolding
L.S.
LABOUR:
Mason (brick layer) 1st class
Day
Mason (brick layer) 2nd class
Day
Coolie
Day
Bhisti
Day
Extra labour element required for lifting of material (above
floor two level upto floor five level)
Coolie
Day

Rate

565.00

4300.00

565.00
0.28
13.52

233.60
4145.53
1.49

0.60
0.60
2.00
0.70

301.00
273.00
247.00
260.00

1.29

247.00
Total:
5081.40

Add water charges @ 1% on

Add C.P & OH @15% on

5132.21
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 590.20
Rs 590.20

Page 152 of 2298

Item Code: 6.46.2

Half brick masonry with non modular mechanised auto claved fly ash sand lime bricks class designation 10, , in SS above plinth and
upt floor V level. - CM 1 : 4 (1 cement : 4 coarse sand)

Code
8658
2201
03.009
9999
0123
0124
0115
0101

0115

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

MATERIALS:
Mechanised Autoclaved fly ash sand lime non modular bricks. 1000
Carraige of Bricks
1000
Cement mortar 1:4 (1 cement : 4 coarse sand).
Cum
Sundries & Scaffolding
L.S.
LABOUR:
Mason (brick layer) 1st class
Day
Mason (brick layer) 2nd class
Day
Coolie
Day
Bhisti
Day
Extra labour element required for lifting of material (above
floor two level upto floor five level)
Coolie
Day

Rate

565.00

4300.00

565.00
0.28
13.52

233.60
3485.41
1.49

0.60
0.60
2.00
0.70

301.00
273.00
247.00
260.00

1.29

247.00
Total:
4896.56

Add water charges @ 1% on

Add C.P & OH @15% on

4945.53
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 568.74
Rs 568.75

Item Code: 7.1.1

RR masonry in foundation and plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand)
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS :
1157
Stone at quarry
cum
1.00
1154
Through and bond stones 7 nos.
100 N
7.00
Carriage of stone7.00x24cmx24cmx39cm = 0.16 cum.
2215
1 .OOcum. + 0.16 cum. = 1.16 cum.
cum
1.16
03.011
Cement mortar 1:6 (1 cement : 6 coarse sand).
0.33
LABOUR
Rate as per item no. 3.11
0125
Mason 2nd class
Day
1.07
0114
Beldar
Day
1.07
0115
Coolie
Day
0.71
0101
Bhishti
Day
0.09
9999
Cement concrete 1:6:12
L.S.
45.76
9999
Sundries
L.S.
4.42
Add water charges @ 1% on

Rate
675.00
1100.00

103.06
2825.29

273.00
247.00
247.00
260.00
1.49
1.49
Total:
2633.84

Add C.P & OH @15% on

2660.18
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

DSR-12

Rs 3059.21
Rs 3059.20

Page 153 of 2298

Item Code: 7.2.1

RR masonry in superstructure above plinth level and upto floor five level, including leveling up with CC 1:6:12 at window sills,
ceiling level and the like - Cement mortar 1:6 (1 cement : 6 coarse sand).

Code
1157
1154
2215

03.011
0125
0114
0115
0101
9999

0115
9999

Details of Cost for : 1.00 Cum

Unit
Quantity

Description

MATERIALS:
Stone for masonry work
cum
Through and bond stone
100 N
Carraige of Soling stone & masonry stone
cum
Bond stone Qty :
7.00 x 24 cm x 24cm x 39 cm = 0.16 cum
Total : 1.00 cum + 0.16 cum = 1.16 cum
Cement mortar 1:6 (1 cement : 6 coarse sand).
Cum
LABOUR:
Mason (for plain stone work) 2nd class)
Day
Beldar
Day
Coolie
Day
Bhisti
Day
Cement concrete 1:6:12
L.S.
Extra labour required for lifting of material upto floor five
level
Coolie
Day
Sundries
L.S.

Rate

1.00
7.00
1.16

675.00
1100.00
103.06

0.33

2825.29

1.34
1.45
0.71
0.09
56.55

273.00
247.00
247.00
260.00
1.49

1.13
15.21

247.00
1.49
Total:
3112.67

Add water charges @ 1% on

Add C.P & OH @15% on

3143.80
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3615.37
Rs 3615.35

Item Code: 7.4.1

Extra for RR masonry with hard stone in : Square or rectangular pillars.
Code
0125
0115

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
LABOUR:
Mason (2nd class)
Coolie

Day
Day

0.58
0.27

Add water charges @ 1% on

Rate
273.00
247.00
Total:
225.03

Add C.P & OH @15% on

227.28
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 261.37
Rs 261.35

Item Code: 7.4.2

Extra for RR masonry with hard stone in : Square or Circular pillars.
Code
1157
2215

DSR-12

Description
Extra stone
Carriage.
LABOUR:
Labour for cutting and dressing stones-

Details of Cost for : 1.00 Cum

Unit
Quantity
cum
0.29
cum
0.29

Rate
675.00
103.06

Page 154 of 2298

0125
0115

Mason (2nd class)

Coolie

Day
Day

1.42
0.35

Add water charges @ 1% on

273.00
247.00
Total:
699.75

Add C.P & OH @15% on

706.75
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 812.76
Rs 812.75

Item Code: 7.5

Extra for RR masonry in curved on plan for a mean radius not exceeding 6m.
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
1157
Extra stone
cum
0.10
2215
Carriage of stone
cum
0.10
Labour for cutting and dressing stones0125
Mason (2nd class)
Day
0.27
0115
Coolie
Day
0.53
Add water charges @ 1% on

Rate
675.00
103.06
273.00
247.00
Total:
282.43

Add C.P & OH @15% on

285.25
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 328.04
Rs 328.05

Item Code: 7.6.1

CRS masonry (first sort) in foundation and plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand)
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS03.011
Cement mortar 1:6 (1 cement : 6 coarse sand).
0.30
1157
Stone at quarry
cum
1.21
1154
Through and bond stone 7 nos.
100 N
7.00
Carriage of stone
7.00x24cmx24cmx39cm = 0.16 cum.
2215
1.21+0.16=1.37 cum.
cum
1.37
LABOUR:
0125
Mason (2nd class)
Day
2.12
0114
Beldar
Day
1.24
0115
Coolie
Day
0.71
0101
Bhisti
Day
0.09
9999
Sundries
L.S.
13.52
Add water charges @ 1% on

Rate
2825.29
675.00
1100.00

103.06
273.00
247.00
247.00
260.00
1.49
Total:
2986.48

Add C.P & OH @15% on

3016.34
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3468.79
Rs 3468.80

Item Code: 7.7.1

CRS masonry (II sort) in foundation and plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand)

DSR-12

Page 155 of 2298

Code
03.011
1157
1154

2215
0125
0114
0115
0101
9999

Description
MATERIALSCement mortar 1:6 (1 cement : 6 coarse sand).
Stone at quarry
Through and bond stones 7 nos.
Carriage of stone
7.00x24cmx24cmx39cm = 0.16 cum.
1.10+0.16 cum = 1.26 cum.
LABOUR:
Mason (2nd class)
Beldar
Coolie
Bhisti
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity

Rate

cum
100 N

0.30
1.10
7.00

2825.29
675.00
1100.00

cum

1.26

103.06

Day
Day
Day
Day
L.S.

1.76
1.24
0.71
0.09
13.52

273.00
247.00
247.00
260.00
1.49
Total:
2802.62

Add water charges @ 1% on

Add C.P & OH @15% on

2830.65
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3255.25
Rs 3255.25

Item Code: 7.8.1

Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level.Masonry work (first sort) , in cement mortar 1:6 (1 cement : 6 coarse sand)

Code
03.011
1157
1154
2215

0125
0114
0115
0101

0115
9999

Description

Details of Cost for : 1.00 Cum

Unit
Quantity

MATERIALS:
Cement mortar 1:6 (1 cement : 6 coarse sand).
Cum
Stone for masonry work
cum
Through and bond stone
100 N
Carraige of masonry stone
cum
Bodn stone Qty :
7 x 0.24 x 0.24 x 0.39 m = 0.16 cum
Total Qty = 1.21 + 0.16 = 1.37 cum
Mason (for plain stone work) 2nd class)
Day
Beldar
Day
Coolie
Day
Bhisti
Day
Extra labour required for lifting of material upto floor five
level
Coolie
Day
Scaffoldings, Sundries etc.,
L.S.

Rate

0.30
1.21
7.00
1.37

2825.29
675.00
1100.00
103.06

2.38
1.59
0.71
0.09

273.00
247.00
247.00
260.00

1.13
37.70

247.00
1.49
Total:
3459.05

Add water charges @ 1% on

Add C.P & OH @15% on

3493.64
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4017.69
Rs 4017.70

Item Code: 7.8.2

DSR-12

Page 156 of 2298

Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level.Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 coarse sand)

Code
03.011
1157
1154
2215

0125
0114
0115
0101

0115
9999

Details of Cost for : 1.00 Cum

Unit
Quantity

Description

MATERIALS:
Cement mortar 1:6 (1 cement : 6 coarse sand).
Cum
Stone for masonry work
cum
Through and bond stone
100 N
Carraige of masonry stone
cum
Bodn stone Qty :
7 x 0.24 x 0.24 x 0.39 m = 0.16 cum
Total Qty = 1.1+ 0.16 = 1.26 cum
Mason (for plain stone work) 2nd class)
Day
Beldar
Day
Coolie
Day
Bhisti
Day
Extra labour required for lifting of material upto floor five
level
Coolie
Day
Scaffoldings, Sundries etc.,
L.S.

Rate

0.30
1.10
7.00
1.26

2825.29
675.00
1100.00
103.06

2.02
1.59
0.71
0.09

273.00
247.00
247.00
260.00

1.13
37.70

247.00
1.49
Total:
3275.19

Add water charges @ 1% on

Add C.P & OH @15% on

3307.94
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 3804.13
Rs 3804.10

Item Code: 7.10.1

Extra for CR masonry with hard stone (first/second sort) in Square or rectangular pillars
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
LABOUR:
0125
Mason (2nd class)
Day
0.67
0115
Coolie
Day
0.27
Add water charges @ 1% on

Rate
273.00
247.00
Total:
249.60

Add C.P & OH @15% on

252.10
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 289.92
Rs 289.90

Item Code: 7.10.2

Extra for CR masonry with hard stone (first/second sort) in Circular pillars
Code
1157
2215

0125
0115

DSR-12

Description
MATERIALS:
Extra stones.
Carriage of stone
LABOUR:
Labour for cutting and dressing :
Mason (2nd class)
Coolie

Details of Cost for : 1.00 Cum

Unit
Quantity

Rate

cum
cum

0.32
0.32

675.00
103.06

Day
Day

1.67
0.35

273.00
247.00
Total:

Page 157 of 2298

Add water charges @ 1% on

791.34

Add C.P & OH @15% on

799.25
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 919.14
Rs 919.15

Item Code: 7.11

Extra for CR masonry with hard stone curved on plan for mean radius not exceeding 6 m
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
1157
Extra stones
cum
0.11
2215
Carriage of stone
cum
0.11
Labour for cutting and dressing:
0125
Mason (2nd class)
Day
0.33
0115
Coolie
Day
0.53
Add water charges @ 1% on

Rate
675.00
103.06
273.00
247.00
Total:
306.59

Add C.P & OH @15% on

309.66
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 356.11
Rs 356.10

Item Code: 7.12.1.1

Stone work in plain ashlar in SS upto floor 5 level in CM 1:6 One face dressed Red sand stone
Details of Cost for : 0.01 Cum
Code
Description
Unit
Quantity
MATERIALSRed sand stone
Finished work = 10 cudm.+
Add wastage @ 33.3% = 3.33 cudm.
1160
Total = 13.33 cudm.
10 cu
13.33
Cost of stone
2216
Carriage of stone @ 2.30kg/cudm =
tonne
0.031
13.33x2.30 = 30.659 kg = tonne 0.031 t.
Extra labour for lifting of materials upto floor V level
0.01x1.50 = 0.015
0115
Coolie
Day
0.015
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
0.088
0102
Black smith 1 st class
Day
0.006
0114
Beldar
Day
0.044
0115
Coolie
Day
0.022
0100
Bandhani
Day
0.044
Fixing charges
LABOUR:
0125
Stone mason (plan work) 2nd class
Day
0.044
0102
Blacksmith 1st class
Day
0.006
0114
Beldar
Day
0.022
0115
Coolie
Day
0.022
0100
Bandhani
Day
0.022
0101
Bhishti
Day
0.022
9999
Scafolding
L.S.
2.73
9999
Mortar for laying and pointing
L.S.
8.06

DSR-12

Rate

60.00
77.87

247.00

273.00
301.00
247.00
247.00
260.00

273.00
301.00
247.00
247.00
260.00
260.00
1.49
1.49

Page 158 of 2298

Add water charges @ 1% on

Total:
191.87

Add C.P & OH @15% on

193.79
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 22286.00
Rs 22285.00

Item Code: 7.12.1.2

Stone work in plain ashlar in SS upto floor 5 level in CM 1:6 One face dressed White sand stone
Details of Cost for : 0.01 Cum
Code
Description
Unit
Quantity
MATERIALSWhite sand stone
Finished work = 10 cudm.+
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
1161
Cost of stone
10 cu
13.33
2216
Carriage of stone @ 2.30kg/cudm =
tonne
0.031
13.33x2.30 = 30.659 kg = tonne
0.031 t.
Extra labour for lifting of materials upto floor V level.
0.01x1.50=0.015
0115
Coolie
Day
0.015
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
0.088
0102
Blacksmith 1st class
Day
0.006
0114
Beldar
Day
0.044
0115
Coolie
Day
0.022
0100
Bandhani
Day
0.044
Fixing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
0.044
0102
Blacksmith 1st class
Day
0.006
0114
Beldar
Day
0.022
0115
Coolie
Day
0.022
0100
Bandhani
Day
0.022
0101
Bhishti
Day
0.022
9999
Scaffolding
L.S.
2.73
9999
Mortar for laying and pointing
L.S.
8.06
Add water charges @ 1% on

Rate

65.00
77.87

247.00

273.00
301.00
247.00
247.00
260.00

273.00
301.00
247.00
247.00
260.00
260.00
1.49
1.49
Total:
198.54

Add C.P & OH @15% on

200.53
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 23061.00
Rs 23060.00

Item Code: 7.12.2.1

Stone work in plain ashlar in SS upto floor 5 level in CM 1:6 Both face dressed Red sand stone
Details of Cost for : 0.01 Cum
Code
Description
Unit
Quantity
MATERIALSRed sand stone
Finished work = 10 cudm.+

DSR-12

Rate

Page 159 of 2298

1160
2216

0115

0125
0102
0114
0115
0100

0125
0102
0114
0115
0100
0101
9999
9999

Add wastage @ 33.3% = 3.33 cudm.

Total = 13.33 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm =
13.33x2.30 = 30.659 kg = tonne say
0.031 t.
Extra labour for lifting of materials upto floor V level
0.01x1.50 = 0.015
Coolie
Dressing charges
LABOUR:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Stone mason (plan work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhishti
Scafolding
Mortar for laying and pointing

10 cu

13.33

60.00

tonne

0.031

77.87

Day

0.015

247.00

Day
Day
Day
Day
Day

0.176
0.012
0.088
0.044
0.088

273.00
301.00
247.00
247.00
260.00

Day
Day
Day
Day
Day
Day
L.S.
L.S.

0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06

273.00
301.00
247.00
247.00
260.00
260.00
1.49
1.49
Total:
245.45

Add water charges @ 1% on

Add C.P & OH @15% on

247.90
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 28509.00
Rs 28507.00

Item Code: 7.12.2.2

Stone work in plain ashlar in SS upto floor 5 level in CM 1:6 Both face dressed White sand stone
Details of Cost for : 0.01 Cum
Code
Description
Unit
Quantity
MATERIALSWhite sand stone
Finished work = 10 cudm.+
Add wastage @ 33.3% = 3'.33 cudm.
Total = 13.33 cudm.
1161
Cost of stone
10 cu
13.33
2216
Carriage of stone @ 2.30kg/cudm =
tonne
0.031
13.33x2.30 = 30.659 kg = tonne say
0.031 t.
Extra labour for lifting of material upto floor V level.
0.01x1.50 = 0.015
0115
Coolie
Day
0.015
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
0.176
0102
Blacksmith 1st class
Day
0.012
0114
Beldar
Day
0.088
0115
Coolie
Day
0.044
0100
Bandhani
Day
0.088
Fixing charges

DSR-12

Rate

65.00
77.87

247.00

273.00
301.00
247.00
247.00
260.00

Page 160 of 2298

0125
0102
0114
0115
0100
0101
9999
9999

LABOUR:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhishti
Scaffolding
Mortar for laying and pointing

Day
Day
Day
Day
Day
Day
L.S.
L.S.

0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06

Add water charges @ 1% on

273.00
301.00
247.00
247.00
260.00
260.00
1.49
1.49
Total:
252.12

Add C.P & OH @15% on

254.64
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 29284.00
Rs 29282.00

Item Code: 7.13.1.1

Stone work in plain ashlar in SS upto floor five level in CM 1:6 including pointing with CM 1:2 (1 white cement : 2 stone dust) - One
face dressed. - Red sand stone
Details of Cost for : 0.01 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
1160
Red sand stone block
10 cu
13.33
60.00
Finished work = 10 cudm + Add wastage @ 33.3% = 3.33
cudm
Total = 13.33 cum
2216
Carraige of Stone blocks white & red sand stone & kota stone tonne
0.031
77.87
slab
Qty : @ 2.30 kg/cudm =
13.33 x 2.20 = 30.659 kg or 0.031 t
Dressing charges :
LABOUR:
0125
Mason (for plain stone work) 2nd class)
Day
0.088
273.00
0102
Blacksmith 1st class
Day
0.006
301.00
0114
Beldar
Day
0.044
247.00
0115
Coolie
Day
0.022
247.00
0100
Bandhani
Day
0.044
260.00
Fixing charges :
0125
Mason (for plain stone work) 2nd class)
Day
0.044
273.00
0102
Blacksmith 1st class
Day
0.006
301.00
0114
Beldar
Day
0.022
247.00
0115
Coolie
Day
0.022
247.00
0100
Bandhani
Day
0.022
260.00
0101
Bhisti
Day
0.022
260.00
9999
Scaffolding
L.S.
2.73
1.49
9999
Mortar for laying and pointing
L.S.
8.06
1.49
9999
Centring and shuttering
L.S.
13.52
1.49
9999
Extra for using white cement
L.S.
8.06
1.49
Extra labour for lifting of material upto floor five level
(0.01 x 1.5 = 0.015)
0115
Coolie
Day
0.015
247.00
Total:
Add water charges @ 1% on
224.02
Add C.P & OH @15% on
226.26
Cost for 0.01 Cum

DSR-12

Page 161 of 2298

Rate per One Cum:

Rate as per DSR-12:

Rs 26020.00
Rs 26021.00

Item Code: 7.13.1.2

Stone work in plain ashlar in SS upto floor five level in CM 1:6 including pointing with CM 1:2 (1 white cement : 2 stone dust) - One
face dressed. - White sand stone
Details of Cost for : 0.01 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
1161
White sand stone block
10 cu
13.33
65.00
Finished work = 10 cudm + Add wastage @ 33.3% = 3.33
cudm
Total = 13.33 cum
2216
Carraige of Stone blocks white & red sand stone & kota stone tonne
0.031
77.87
slab
Qty : @ 2.30 kg/cudm =
13.33 x 2.20 = 30.659 kg or 0.031 t
Dressing charges :
LABOUR:
0125
Mason (for plain stone work) 2nd class)
Day
0.088
273.00
0102
Blacksmith 1st class
Day
0.006
301.00
0114
Beldar
Day
0.044
247.00
0115
Coolie
Day
0.022
247.00
0100
Bandhani
Day
0.044
260.00
Fixing charges :
0125
Mason (for plain stone work) 2nd class)
Day
0.044
273.00
0102
Blacksmith 1st class
Day
0.006
301.00
0114
Beldar
Day
0.022
247.00
0115
Coolie
Day
0.022
247.00
0100
Bandhani
Day
0.022
260.00
0101
Bhisti
Day
0.022
260.00
9999
Scaffolding
L.S.
2.73
1.49
9999
Mortar for laying and pointing
L.S.
8.06
1.49
9999
Centring and shuttering
L.S.
13.52
1.49
9999
Extra for using white cement
L.S.
8.06
1.49
Extra labour for lifting of material upto floor five level
(0.01 x 1.5 = 0.015)
0115
Coolie
Day
0.015
247.00
Total:
Add water charges @ 1% on
230.69
Add C.P & OH @15% on
233.00
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 26795.00
Rs 26795.00

Item Code: 7.13.2.1

Stone work in plain ashlar in ARCHES SS upto floor five level in CM 1:6 including pointing with CM 1:2 (1 white cement : 2 stone
dust) - One face dressed. - Red sand stone
Details of Cost for : 0.01 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
1160
Red sand stone block
10 cu
13.33
60.00
Finished work = 10 cudm + Add wastage @ 33.3% = 3.33
cudm
Total = 13.33 cum

DSR-12

Page 162 of 2298

2216

0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
9999
9999

0115

Carraige of Stone blocks white & red sand stone & kota stone
slab
Qty : @ 2.30 kg/cudm =
13.33 x 2.20 = 30.659 kg or 0.031 t
Dressing charges :
LABOUR:
Mason (for plain stone work) 2nd class)
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges :
Mason (for plain stone work) 2nd class)
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
Centring and shuttering
Extra for using white cement
Extra labour for lifting of material upto floor five level
(0.01 x 1.5 = 0.015)
Coolie

tonne

0.031

77.87

Day
Day
Day
Day
Day

0.176
0.012
0.088
0.044
0.088

273.00
301.00
247.00
247.00
260.00

Day
Day
Day
Day
Day
Day
L.S.
L.S.
L.S.
L.S.

0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
13.52
8.06

273.00
301.00
247.00
247.00
260.00
260.00
1.49
1.49
1.49
1.49

Day

0.015

247.00
Total:
277.60

Add water charges @ 1% on

Add C.P & OH @15% on

280.38
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 32244.00
Rs 32244.00

Item Code: 7.13.2.2

Stone work in plain ashlar in ARCHES SS upto floor five level in CM 1:6 including pointing with CM 1:2 (1 white cement : 2 stone
dust) - One face dressed. - White sand stone
Details of Cost for : 0.01 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
1161
White sand stone block
10 cu
13.33
65.00
Finished work = 10 cudm + Add wastage @ 33.3% = 3.33
cudm
Total = 13.33 cum
2216
Carraige of Stone blocks white & red sand stone & kota stone tonne
0.031
77.87
slab
Qty : @ 2.30 kg/cudm =
13.33 x 2.20 = 30.659 kg or 0.031 t
Dressing charges :
LABOUR:
0125
Mason (for plain stone work) 2nd class)
Day
0.176
273.00
0102
Blacksmith 1st class
Day
0.012
301.00
0114
Beldar
Day
0.088
247.00
0115
Coolie
Day
0.044
247.00
0100
Bandhani
Day
0.088
260.00
Fixing charges :
0125
Mason (for plain stone work) 2nd class)
Day
0.044
273.00
0102
Blacksmith 1st class
Day
0.006
301.00
0114
Beldar
Day
0.022
247.00

DSR-12

Page 163 of 2298

0115
0100
0101
9999
9999
9999
9999

0115

Coolie
Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
Centring and shuttering
Extra for using white cement
Extra labour for lifting of material upto floor five level
(0.01 x 1.5 = 0.015)
Coolie

Day
Day
Day
L.S.
L.S.
L.S.
L.S.

0.022
0.022
0.022
2.73
8.06
13.52
8.06

247.00
260.00
260.00
1.49
1.49
1.49
1.49

Day

0.015

247.00
Total:
284.27

Add water charges @ 1% on

Add C.P & OH @15% on

287.11
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 33018.00
Rs 33017.00

Item Code: 7.14.1.1

Stone work in plain ashlar in Domes in SS upto floor five level in CM 1:6 including pointing with CM 1:2 (1 white cement : 2 stone
dust) - One face dressed. - Red sand stone
Details of Cost for : 0.01 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
1160
Red sand stone block
10 cu
13.33
60.00
Finished work = 10 cudm + Add wastage @ 33.3% = 3.33
cudm
Total = 13.33 cum
2216
Carraige of Stone blocks white & red sand stone & kota stone tonne
0.031
77.87
slab
Qty : @ 2.30 kg/cudm =
13.33 x 2.20 = 30.659 kg or 0.031 t
Dressing charges :
LABOUR:
0125
Mason (for plain stone work) 2nd class)
Day
0.176
273.00
0102
Blacksmith 1st class
Day
0.006
301.00
0126
Mason (for ornamental stone work) 1st class
Day
0.176
301.00
0114
Beldar
Day
0.044
247.00
0115
Coolie
Day
0.022
247.00
0100
Bandhani
Day
0.044
260.00
Fixing charges :
0125
Mason (for plain stone work) 2nd class)
Day
0.044
273.00
0102
Blacksmith 1st class
Day
0.006
301.00
0114
Beldar
Day
0.022
247.00
0115
Coolie
Day
0.022
247.00
0100
Bandhani
Day
0.022
260.00
0101
Bhisti
Day
0.022
260.00
9999
Scaffolding
L.S.
2.73
1.49
9999
Mortar for laying and pointing
L.S.
8.06
1.49
9999
Centring and shuttering
L.S.
33.15
1.49
9999
Extra for using white cement
L.S.
8.06
1.49
Extra labour for lifting of material upto floor five level
(0.01 x 1.5 = 0.015)
0115
Coolie
Day
0.015
247.00
Total:
Add water charges @ 1% on
330.28
Add C.P & OH @15% on

DSR-12

333.58

Page 164 of 2298

Cost for 0.01 Cum

Rate per One Cum:
Rate as per DSR-12:

Rs 38362.00
Rs 38362.00

Item Code: 7.14.1.2

Stone work in plain ashlar in Domes in SS upto floor five level in CM 1:6 including pointing with CM 1:2 (1 white cement : 2 stone
dust) - One face dressed. - White sand stone
Details of Cost for : 0.01 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
1161
White sand stone block
10 cu
13.33
65.00
Finished work = 10 cudm + Add wastage @ 33.3% = 3.33
cudm
Total = 13.33 cum
2216
Carraige of Stone blocks white & red sand stone & kota stone tonne
0.031
77.87
slab
Qty : @ 2.30 kg/cudm =
13.33 x 2.20 = 30.659 kg or 0.031 t
Dressing charges :
LABOUR:
0125
Mason (for plain stone work) 2nd class)
Day
0.176
273.00
0102
Blacksmith 1st class
Day
0.006
301.00
0126
Mason (for ornamental stone work) 1st class
Day
0.176
301.00
0114
Beldar
Day
0.044
247.00
0115
Coolie
Day
0.022
247.00
0100
Bandhani
Day
0.044
260.00
Fixing charges :
0125
Mason (for plain stone work) 2nd class)
Day
0.044
273.00
0102
Blacksmith 1st class
Day
0.006
301.00
0114
Beldar
Day
0.022
247.00
0115
Coolie
Day
0.022
247.00
0100
Bandhani
Day
0.022
260.00
0101
Bhisti
Day
0.022
260.00
9999
Scaffolding
L.S.
2.73
1.49
9999
Mortar for laying and pointing
L.S.
8.06
1.49
9999
Centring and shuttering
L.S.
33.15
1.49
9999
Extra for using white cement
L.S.
8.06
1.49
Extra labour for lifting of material upto floor five level
(0.01 x 1.5 = 0.015)
0115
Coolie
Day
0.015
247.00
Total:
Add water charges @ 1% on
336.95
Add C.P & OH @15% on
340.32
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 39137.00
Rs 39136.00

Item Code: 7.14.2.1

Stone work in plain ashlar in DOMES SS upto floor five level in CM 1:6 including pointing with CM 1:2 (1 white cement : 2 stone
dust) - One face dressed. - Red sand stone
Details of Cost for : 0.01 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
1160
Red sand stone block
10 cu
13.33
60.00

DSR-12

Page 165 of 2298

2216

0125
0102
0126
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
9999
9999

0115

Finished work = 10 cudm + Add wastage @ 33.3% = 3.33

cudm
Total = 13.33 cum
Carraige of Stone blocks white & red sand stone & kota stone
slab
Qty : @ 2.30 kg/cudm =
13.33 x 2.20 = 30.659 kg or 0.031 t
Dressing charges :
LABOUR:
Mason (for plain stone work) 2nd class)
Blacksmith 1st class
Mason (for ornamental stone work) 1st class
Beldar
Coolie
Bandhani
Fixing charges :
Mason (for plain stone work) 2nd class)
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
Centring and shuttering
Extra for using white cement
Extra labour for lifting of material upto floor five level
(0.01 x 1.5 = 0.015)
Coolie

tonne

0.031

77.87

Day
Day
Day
Day
Day
Day

0.352
0.012
0.352
0.088
0.044
0.088

273.00
301.00
301.00
247.00
247.00
260.00

Day
Day
Day
Day
Day
Day
L.S.
L.S.
L.S.
L.S.

0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
33.15
8.06

273.00
301.00
247.00
247.00
260.00
260.00
1.49
1.49
1.49
1.49

Day

0.015

247.00
Total:
460.85

Add water charges @ 1% on

Add C.P & OH @15% on

465.46
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 53528.00
Rs 53528.00

Item Code: 7.14.2.2

Stone work in plain ashlar in DOMES SS upto floor five level in CM 1:6 including pointing with CM 1:2 (1 white cement : 2 stone
dust) - Both face dressed. - White sand stone
Details of Cost for : 0.01 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
1161
White sand stone block
10 cu
13.33
65.00
Finished work = 10 cudm + Add wastage @ 33.3% = 3.33
cudm
Total = 13.33 cum
2216
Carraige of Stone blocks white & red sand stone & kota stone tonne
0.031
77.87
slab
Qty : @ 2.30 kg/cudm =
13.33 x 2.20 = 30.659 kg or 0.031 t
Dressing charges :
LABOUR:
0125
Mason (for plain stone work) 2nd class)
Day
0.352
273.00
0102
Blacksmith 1st class
Day
0.012
301.00
0126
Mason (for ornamental stone work) 1st class
Day
0.352
301.00
0114
Beldar
Day
0.088
247.00
0115
Coolie
Day
0.044
247.00

DSR-12

Page 166 of 2298

0100
0125
0102
0114
0115
0100
0101
9999
9999
9999
9999

0115

Bandhani
Fixing charges :
Mason (for plain stone work) 2nd class)
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
Centring and shuttering
Extra for using white cement
Extra labour for lifting of material upto floor five level
(0.01 x 1.5 = 0.015)
Coolie

Day

0.088

260.00

Day
Day
Day
Day
Day
Day
L.S.
L.S.
L.S.
L.S.

0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
33.15
8.06

273.00
301.00
247.00
247.00
260.00
260.00
1.49
1.49
1.49
1.49

Day

0.015

247.00
Total:
467.52

Add water charges @ 1% on

Add C.P & OH @15% on

472.20
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 54303.00
Rs 54302.00

Item Code: 7.15.1.1

Stone work ashlar punched (ordinary) in SS upto floor 5 level in CM 1:6 Red sand stone: Single faced punched.

Code

1160
2216

0125
0102
0114
0115
0100

0125
0102
0114
0115
0100
0101
9999
9999

0115

Description

Details of Cost for : 0.01 Cum

Unit
Quantity

MATERIALSRed sand stone

Finished work = 10 cudm.
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
Cost of stone
10 cu
Carriage of stone @ 2.30kg/cudm =
tonne
13.33x2.30=30.659 kg= tonne say 0.031 t
Dressing charges
LABOUR:
Stone mason (plane work) 2nd class
Day
Blacksmith 1st class
Day
Beldar
Day
Coolie
Day
Bandhani
Day
Fixing charges
LABOUR:
Mason (for plain stone work) 2nd class)
Day
Blacksmith 1st class
Day
Beldar
Day
Coolie
Day
Bandhani
Day
Bhishti
Day
Scaffolding
L.S.
Mortar for laying and pointing
L.S.
Extra labour for lifting of materials upto floor V level=
0.01x1.50 = 0.015
Coolie
Day

13.33
0.031

60.00
77.87

0.059
0.006
0.044
0.022
0.044

273.00
301.00
247.00
247.00
260.00

0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06

273.00
301.00
247.00
247.00
260.00
260.00
1.49
1.49

0.015

247.00
Total:
183.96

Add water charges @ 1% on

DSR-12

Rate

Page 167 of 2298

Add C.P & OH @15% on

185.80
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 21367.00
Rs 21366.00

Item Code: 7.15.1.2

Stone work ashlar punched (ordinary) in SS upto floor 5 level in CM 1:6 - White sand stone: One Face punched

Code
1161

2216

0125
0102
0114
0115
0100

0125
0102
0114
0115
0100
0101
9999
9999

0115

Description
MATERIALSWhite sand stone block
Finished work = 10 cudm.
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm
Carriage of stone @ 2.30kg/cudm
13.33x2.30 = 30.659 kg say 0.031 t
Dressing charges
LABOUR:
Stone mason (plane work) 2nd class
Black smith 1st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Stone mason (plan work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhishti
Scafolding
Mortar for laying and pointing
Extra labour for lfting of material upto floor five level
(0.01x1.5=0.015)
Coolie

Details of Cost for : 0.01 Cum

Unit
Quantity

Rate

10 cu

13.33

65.00

tonne

0.031

77.87

Day
Day
Day
Day
Day

0.059
0.006
0.044
0.022
0.044

273.00
301.00
247.00
247.00
260.00

Day
Day
Day
Day
Day
Day
L.S.
L.S.

0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06

273.00
301.00
247.00
247.00
260.00
260.00
1.49
1.49

Day

0.015

247.00
Total:
190.63

Add water charges @ 1% on

Add C.P & OH @15% on

192.54
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 22142.00
Rs 22141.00

Item Code: 7.15.2.1

Stone work ashlar punched (ordinary) in SS upto floor 5 level in CM 1:6 Both faced punched. - Red sand stone

Code

1160

DSR-12

Description
Details of cost for 10 cudm.
MATERIALSRed sand stone block
Finished work = 10 cudm.+
Add wastage @ 33.3% = 3.33 cudm.

Details of Cost for : 0.01 Cum

Unit
Quantity

10 cu

13.33

Rate

60.00

Page 168 of 2298

2216

0115

0125
0102
0114
0115
0100

0125
0102
0114
0115
0100
0101
9999
9999

Total = 13.33 cudm.

Carriage of stone @ 2.30kg/cudm =
13.33x2.30=30.659 kg= tonne say 0.031 t
Extra labour for lifting of material upto floor five level
0.01 x 1.50=0.015
Coolie
Dressing charges
LABOUR:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
LABOUR:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhishti
Scaffolding
Mortar for laying and pointing

tonne

0.031

77.87

Day

0.015

247.00

Day
Day
Day
Day
Day

0.118
0.012
0.088
0.044
0.088

273.00
301.00
247.00
247.00
260.00

Day
Day
Day
Day
Day
Day
L.S.
L.S.

0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06

273.00
301.00
247.00
247.00
260.00
260.00
1.49
1.49
Total:
229.61

Add water charges @ 1% on

Add C.P & OH @15% on

231.91
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 26670.00
Rs 26668.00

Item Code: 7.15.2.2

Stone work ashlar punched (ordinary) in SS upto floor 5 level in CM 1:6 White sand stone. Double faced punched.

Code

1161
2216

0115

0125
0102
0114
0115
0100

DSR-12

Description
Details of cost for 10 cudm.
MATERIALSWhite sand stone
Finished work = 10 cudm.
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm =
13.33x2.30 = 30.659 kg = tonne kg say
0.031 t.
Extra labour for lifting of material upto floor
V level.
0.01 x 1.50 = 0.015
Coolie
Dressing charges
LABOUR:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani

Details of Cost for : 0.01 Cum

Unit
Quantity

Rate

10 cu
tonne

13.33
0.031

65.00
77.87

Day

0.015

247.00

Day
Day
Day
Day
Day

0.118
0.012
0.088
0.044
0.088

273.00
301.00
247.00
247.00
260.00

Page 169 of 2298

0125
0102
0114
0115
0100
0101
9999
9999

Fixing charges
LABOUR:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhishti
Scaffolding
Mortar for laying and pointing

Day
Day
Day
Day
Day
Day
L.S.
L.S.

0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06

Add water charges @ 1% on

273.00
301.00
247.00
247.00
260.00
260.00
1.49
1.49
Total:
236.28

Add C.P & OH @15% on

238.64
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 27444.00
Rs 27442.00

Item Code: 7.16

Extra for stone work, plain ashlar or ashlar punched above floor V level for every four floors or part thereof.

Code

0114

Details of Cost for : 0.01 Cum

Description
Unit
Quantity
Details of cost for 10 cudm above floor V level Labour
required for lifting of material (above floor five level for each
additional four floors) or part thereof.
Extra labour for lifting of materials above floor
V level (0.01 x 2.00 = 0.020)
Beldar
Day
0.02
Add water charges @ 1% on

Rate

247.00
Total:
4.94

Add C.P & OH @15% on

4.99
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 574.00
Rs 574.00

Item Code: 7.17.1

Extra for plain ashlar or ashlar punched in :- Square or rectangular pillars.
Code
9999

Description
Details of cost for 10 cudm.
Labour and materials

Details of Cost for : 0.01 Cum

Unit
Quantity
L.S.

8.97

Add water charges @ 1% on

Rate
1.49
Total:
13.37

Add C.P & OH @15% on

13.50
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 1553.00
Rs 1552.00

Item Code: 7.18

Extra for stone work; plain ashlar/ashlar punched curved on plan with a mean radius not exceeding 6 metre.
Details of Cost for : 0.01 Cum

DSR-12

Page 170 of 2298

Code
9999

Description
Details of cost for 10 cudm.
Labour and materials

Unit
L.S.

Quantity

Rate

6.24

1.49
Total:
9.30

Add water charges @ 1% on

Add C.P & OH @15% on

9.39
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 1080.00
Rs 1080.00

Item Code: 7.19

Extra for additional cost of centring for arches exceeding 6 m span.
Code

1197
2204

1225

1034

2302

DSR-12

Details of Cost for : 33.31 Sqm

Description
Unit
Quantity
Rate
Centering and shuttering for arches and carved surface
exceeding 6m in span (an average of 8m)
Radius R = 5m 2R-2=4+4
tan-(4/3)=53.28
2x53.28=106
Surface area
=2x22/7x5x3.6x106/360=33.3lsqm.
Arc=9.25m
MATERIAL:
Tie-2x8x0. 18x0.05 =0.144cum
Struts-2x2.5x0.1x0.1 =0.050cum.
Struts-2x 1.77x0.1x0. l=0.035cum.
Ribs-6x 1.54x0.23x0.1 =0.213cum.
Struts-2xl .72x0.1x0.1 =0.034cum.
Total=0.476cum.
For four such frames
=0.476x4= 1.904 cum.
Iaggings-75x3.6x0.125x0.075=2.531 cum.
Tie-2x3.6x0.225x0.038=0.062cum.
Brace-3x2x2.14x0.225x0.038=0.110
Brace-3x4x3.8x0.225x0.038=0.390
Sleepers-4x3.6x0.20x0.15=0.432
Sleepers-2x4x3.6xO. 175x0.075=0.378
Vertical post-4x4x3.6x0.15x0.15=1.296
Total =7.103cum. Qty taken l/8th of qty for cost using once =
cum
0.8879
25000.00
7.103/8 = 0.8879 cum
Carriage of wood
cum
0.8879
100.11
Fittings:
3 way straps 50mmxl0mm = 32 Nos.
32 no. @0.50cm each = 16m
Straps-50mmxl0mm = 8 Nos. @0.25cm each
= 2m
Total = 18m
18m, wt @ 3.9kg/m = 70.2 kg. = 0.702q
quint
0.0878
3950.00
Qty taken l/8th of qty for cost using once =
0.702/8 = 0.08775 Qtl.
Bolts 160 Nos. 254 mm long 16mm dia.quint
0.08
5400.00
160x.254xl .58=64.21 kg=0.64q.
Qty taken l/8th of qty for cost using once =
0.64/8 = 0.08 Qtl.
Carriage of steel = 0.1342t
tonne
0.0168
77.87
Qty taken l/8th of qty for cost using once =

Page 171 of 2298

0112
0114
9999

05.009.09

0.1342/8 = 0.01677 t
Labour:
Carpenter 2nd class
Beldar
Sundries
Less Cost of shuttering etc. for an arch
exceeding 6 m span i.e. for an average of 8 m
span
C/S i/c strutting, propping etc at all level Arches, domes etc

Day
Day
L.S.

28.00
24.00
134.55

273.00
247.00
1.49

-33.31

866.70

Add water charges @ 1% except on [A] i.e on

Total:
36838.99

Add C.P & OH @15% except on [A] i.e on

37207.38
Cost for 33.31 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 417.85
Rs 417.85

Item Code: 7.20.1

Stone work sunk or moulded or sunk and moulded upto floor V level in CM 1 : 6 CS :- Red sand stone.
Details of Cost for : 0.01 Cum
Code
Description
Unit
Quantity
Details of cost for 10 cudm.
MATERIALSRed sand stone
Finished work = 10 cudm.
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
1160
Cost of red sand stone
10 cu
13.33
2216
Cement mortar : Carriage of stone @
tonne
0.031
2.30kg/cudm= 13.33x2.30 = 30.659 kg =
0.031 t.
9999
Extra for using white cement
L.S.
8.06
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
0.291
0102
Blacksmith 1 st class
Day
0.006
0114
Beldar
Day
0.044
0115
Coolie
Day
0.022
0100
Bandhani
Day
0.044
Fixing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
0.044
0102
Blacksmith 1st class
Day
0.006
0114
Beldar
Day
0.022
0115
Coolie
Day
0.022
0100
Bandhani
Day
0.022
0101
Bhishti
Day
0.022
9999
Scaffolding
L.S.
2.73
9999
Mortar for laying and pointing
L.S.
8.06
Extra labour for lifting of materials upto floor V level
0.01x1.50=0.015
0115
Coolie
Day
0.015
Add water charges @ 1% on

Rate

60.00
77.87

1.49

273.00
301.00
247.00
247.00
260.00

273.00
301.00
247.00
247.00
260.00
260.00
1.49
1.49

247.00
Total:
259.30

Add C.P & OH @15% on

261.89
Cost for 0.01 Cum

DSR-12

Page 172 of 2298

Rate per One Cum:

Rate as per DSR-12:

Rs 30117.00
Rs 30116.00

Item Code: 7.20.2

Stone work sunk or moulded or sunk and moulded upto floor V level in CM 1 : 6 CS :- White sand stone.
Details of Cost for : 0.01 Cum
Code
Description
Unit
Quantity
Details of cost for 10 cudm.
MATERIALSRed sand stone
Finished work = 10 cudm.+
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
1161
Cost of stone
10 cu
13.33
2216
Carriage of stone @ 2.30kg/cudm =
tonne
0.031
13.33x2.30=30.659kg=0.031t.
9999
Extra for using white cement
L.S.
8.06
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
0.291
0102
Blacksmith 1 st class
Day
0.006
0114
Beldar
Day
0.044
0115
Coolie
Day
0.022
0100
Bandhani
Day
0.044
Fixing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
0.044
0102
Blacksmith 1 st class
Day
0.006
0114
Beldar
Day
0.022
0115
Coolie
Day
0.022
0100
Bandhani
Day
0.022
0101
Bhishti
Day
0.022
9999
Scaffolding
L.S.
2.73
9999
Mortar for laying and pointing
L.S.
8.06
Extra labour for lifting of materials upto floor V level
0.01x1.50=0.015
0115
Coolie
Day
0.015
Add water charges @ 1% on

Rate

65.00
77.87
1.49

273.00
301.00
247.00
247.00
260.00

273.00
301.00
247.00
247.00
260.00
260.00
1.49
1.49

247.00
Total:
265.97

Add C.P & OH @15% on

268.63
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 30892.00
Rs 30891.00

Item Code: 7.21.1

Extra for stone work sunk or moulded or sunk and moulded or carved in : Triangular or Square or rectangular pillars.

Code
9999

DSR-12

Description
Details of cost for 10 cudm.
Labour

Details of Cost for : 0.01 Cum

Unit
Quantity
L.S.

11.70

Rate

Add water charges @ 1% on

1.49
Total:
17.43

Add C.P & OH @15% on

17.60

Page 173 of 2298

Cost for 0.01 Cum

Rate per One Cum:
Rate as per DSR-12:

Rs 2024.00
Rs 2024.00

Item Code: 7.21.2

Extra for stone work sunk or moulded or sunk and moulded or carved in : Circular or polygonal pillars.
Details of Cost for : 0.01 Cum
Code
Description
Unit
Quantity
Details of cost for 10 cudm.
9999
Labour
L.S.
33.15
Add water charges @ 1% on

Rate
1.49
Total:
49.39

Add C.P & OH @15% on

49.88
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5736.00
Rs 5736.00

Item Code: 7.22

Extra for stone work sunk or moulded in cornices.
Code

0125
0114

Details of Cost for : 22.50 units

Description
Unit
Quantity
Details of cost for a cornice 30cm long 60cm deep and 15cm
projection
Extra labour:
Stone mason (2nd class)
Day
0.50
Beldar
Day
0.75
Add water charges @ 1% on

Rate

273.00
247.00
Total:
321.75

Add C.P & OH @15% on

324.97
Cost for 22.50 units
Rate per Units:
Rate as per DSR-12:

Rs 16.61
Rs 16.60

Item Code: 7.23.1.1

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone-exposed face fine dressed
with rough backing: 70 mm thick.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 70 cudm. +
Add wastage @ 33.3% = 23.33 cudm.
Total = 93.33 cudm.
1160
Red sand stone block
10 cu
93.33
60.00
2216
Carriage of stone @ 2.30kg/cudm
tonne
0.215
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
1.35
273.00
0102
Blacksmith 1st class
Day
0.032
301.00
0114
Beldar
Day
0.224
247.00
0115
Coolie
Day
0.112
247.00
0100
Bandhani
Day
0.224
260.00

DSR-12

Page 174 of 2298

0125
0100
0114
0115
0101
1237
9999
03.008

Fixing charges
LABOUR:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab by mechanical device
Scaffolding
Cement mortar 1:3 (1 cement : 3 coarse sand)
(Rate as per item No 3.8 of S.H. mortar)

Day
Day
Day
Day
Day
metre
L.S.

0.448
0.336
0.336
0.336
0.336
4.00
19.76
0.018

273.00
260.00
247.00
247.00
260.00
8.00
1.49
4145.53

Add water charges @ 1% on

Total:
1735.29

Add C.P & OH @15% on

1752.64
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2015.54
Rs 2015.55

Item Code: 7.23.1.2

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone-exposed face fine dressed
with rough backing: 60 mm thick.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 60 cudm.
Add wastage @ 33.3% = 20 cudm.
Total = 80 cudm.
1160
Cost of stone
10 cu
80.00
60.00
2216
Carriage of stone @ 2.30kg/cudm
tonne
0.184
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
1.35
273.00
0102
Blacksmith 1st class
Day
0.032
301.00
0114
Beldar
Day
0.224
247.00
0115
Coolie
Day
0.112
247.00
0101
Bandhani
Day
0.224
260.00
Fixing charges
LABOUR:
0125
Stone mason (for plain work) 2nd class
Day
0.448
273.00
0100
Bandhani
Day
0.336
260.00
0114
Beldar
Day
0.336
247.00
0115
Coolie
Day
0.336
247.00
0101
Bhisti
Day
0.336
260.00
1237
Cutting sand stone slab by mechanical device
metre
4.00
8.00
9999
Scaffolding
L.S.
19.76
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.018
4145.53
Total:
Add water charges @ 1% on
1652.90
Add C.P & OH @15% on
1669.43
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 1919.84
Rs 1919.85

Page 175 of 2298

Item Code: 7.23.1.3

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone-exposed face fine dressed
with rough backing: 50 mm thick .
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 50 cudm.
Add wastage @ 33.3% = 16.7 cudm.
Total = 66.7 cudm.
1160
Cost of stone
10 cu
66.70
60.00
2216
Carriage of stone @ 2.30kg/cudm
tonne
0.153
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
1.35
273.00
0102
Blacksmith 1st class
Day
0.032
301.00
0114
Beldar
Day
0.224
247.00
0115
Coolie
Day
0.112
247.00
0101
Bandhani
Day
0.224
260.00
Fixing charges
LABOUR:
0125
Stone mason (for plain work) 2nd class
Day
0.448
273.00
0101
Bandhani
Day
0.336
260.00
0114
Beldar
Day
0.336
247.00
0115
Coolie
Day
0.336
247.00
0101
Bhisti
Day
0.336
260.00
1237
Cutting sand stone slab by mechanical device
metre
4.00
8.00
9999
Scaffolding
L.S.
19.76
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.018
4145.53
(Rate as per item No 3.8 fo SH- mortar)
Total:
Add water charges @ 1% on
1570.68
Add C.P & OH @15% on
1586.39
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1824.35
Rs 1824.35

Item Code: 7.23.1.4

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone-exposed face fine dressed
with rough backing: 40 mm thick .
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 40 cudm.
Add wastage @ 33.3% = 13.33 cudm.
Total = 53.33 cudm.
1160
Cost of stone
10 cu
53.33
60.00
2216
Carriage of stone @ 2.30kg/cudm
tonne
0.123
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
1.35
273.00
0102
Blacksmith 1st class
Day
0.032
301.00
0114
Beldar
Day
0.224
247.00
0115
Coolie
Day
0.112
247.00
0100
Bandhani
Day
0.224
260.00
Fixing charges

DSR-12

Page 176 of 2298

0125
0100
0114
0115
0101
1237
9999
03.008

LABOUR:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab by mechanical device
Scaffolding
Cement mortar 1:3 (1 cement : 3 coarse sand)
(Rate as per item No 3.8 of SH - mortar)

Day
Day
Day
Day
Day
metre
L.S.

0.448
0.336
0.336
0.336
0.336
4.00
19.76
0.018

273.00
260.00
247.00
247.00
260.00
8.00
1.49
4145.53

Add water charges @ 1% on

Total:
1488.13

Add C.P & OH @15% on

1503.01
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1728.46
Rs 1728.45

Item Code: 7.23.1.5

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone-exposed face fine dressed
with rough backing: 30 mm thick.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 30 cudm.
Add wastage @ 33.3% = 9.99cudm.
Total = 39.99 cudm.
1160
Cost of stone
10 cu
39.99
60.00
2216
Carriage of stone @ 2.30kg/cudm
tonne
0.092
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
1.35
273.00
0102
Blacksmith 1 st class
Day
0.032
301.00
0114
Beldar
Day
0.224
247.00
0115
Coolie
Day
0.112
247.00
0101
Bandhani
Day
0.224
260.00
Fixing charges
LABOUR:
0125
Stone mason (for plain work) 2nd class
Day
0.448
273.00
0100
Bandhani
Day
0.336
260.00
0114
Beldar
Day
0.336
247.00
0115
Coolie
Day
0.336
247.00
0101
Bhisti
Day
0.336
260.00
1237
Cutting sand stone slab by mechanical device
metre
4.00
8.00
9999
Scaffolding
L.S.
19.76
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.018
4145.53
(Rate as per item No 3.8 of SH. mortar)
Total:
Add water charges @ 1% on
1405.67
Add C.P & OH @15% on
1419.73
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 1632.69
Rs 1632.70

Page 177 of 2298

Item Code: 7.23.2.1

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone - exposed face machine cut
with rough backg: 70 mm thick.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 70 cudm. +
Add wastage @ 33.3% = 23.33 cudm.
Total = 93.33 cudm.
1160
Cost of stone
10 cu
93.33
60.00
2216
Carriage of stone @ 2.30kg/cudm
tonne
0.215
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
2.70
273.00
0102
Blacksmith 1st class
Day
0.064
301.00
0114
Beldar
Day
0.448
247.00
0115
Coolie
Day
0.224
247.00
0100
Bandhani
Day
0.448
260.00
Fixing charges
LABOUR:
0125
Stone mason (for plain work) 2nd class
Day
0.448
273.00
0101
Bandhani
Day
0.336
260.00
0114
Beldar
Day
0.336
247.00
0115
Coolie
Day
0.336
247.00
0101
Bhisti
Day
0.336
260.00
1237
Cutting sand stone slab by mechanical device
metre
4.00
8.00
9999
Scaffolding
L.S.
19.76
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.018
4145.53
(Rate as per item No. 3.8 of SH- mrtar)
Total:
Add water charges @ 1% on
2254.71
Add C.P & OH @15% on
2277.26
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2618.85
Rs 2618.85

Item Code: 7.23.2.2

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone - exposed face machine cut
with rough backg: 60 mm thick.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 60 cudm.
Add wastage @ 33.3% = 20 cudm.
Total = 80 cudm.
1160
Cost of stone
10 cu
80.00
60.00
2216
Carriage of stone @ 2.30kg/cudm
tonne
0.184
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
2.70
273.00
0102
Blacksmith 1st class
Day
0.064
301.00
0114
Beldar
Day
0.448
247.00
0115
Coolie
Day
0.224
247.00
0100
Bandhani
Day
0.448
260.00
Fixing charges

DSR-12

Page 178 of 2298

0125
0100
0114
0115
0101
1237
9999
03.008

LABOUR:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab by mechanical device
Scaffolding
Cement mortar 1:3 (1 cement : 3 coarse sand)
(Rate as per item No. 3.8 of SH- mortar)

Day
Day
Day
Day
Day
metre
L.S.

0.448
0.336
0.336
0.336
0.336
4.00
19.76
0.018

273.00
260.00
247.00
247.00
260.00
8.00
1.49
4145.53

Add water charges @ 1% on

Total:
2172.32

Add C.P & OH @15% on

2194.04
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2523.15
Rs 2523.15

Item Code: 7.23.2.3

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone - exposed face machine cut
with rough backg: 50 mm thick .
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 50 cudm. +
Add wastage @ 33.3% = 16.7 cudm.
Total = 66.7 cudm.
1160
Cost of stone
10 cu
66.70
60.00
2216
Carriage of stone @ 2.30kg/cudm
tonne
0.153
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
2.70
273.00
0102
Blacksmith 1st class
Day
0.064
301.00
0114
Beldar
Day
0.448
247.00
0115
Coolie
Day
0.224
247.00
0101
Bandhani
Day
0.448
260.00
Fixing charges
LABOUR:
0125
Stone mason (for plain work) 2nd class
Day
0.448
273.00
0100
Bandhani
Day
0.336
260.00
0114
Beldar
Day
0.336
247.00
0115
Coolie
Day
0.336
247.00
0101
Bhisti
Day
0.336
260.00
1237
Cutting sand stone slab by mechanical device
metre
4.00
8.00
9999
Scaffolding
L.S.
19.76
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.018
4145.53
(Rate as per item No. 3.8 of SH- mortar)
Total:
Add water charges @ 1% on
2090.10
Add C.P & OH @15% on
2111.00
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 2427.65
Rs 2427.65

Page 179 of 2298

Item Code: 7.23.2.4

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone - exposed face machine cut
with rough backg: 40 mm thick .
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 40 cudm. +
Add wastage @ 33.3% = 13.33 cudm.
Total = 53.33 cudm.
1160
Cost of stone
10 cu
53.33
60.00
2216
Carriage of stone @ 2.30kg/cudm
tonne
0.123
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
2.70
273.00
0102
Blacksmith 1st class
Day
0.064
301.00
0114
Beldar
Day
0.448
247.00
0115
Coolie
Day
0.224
247.00
0100
Bandhani
Day
0.448
260.00
Fixing charges
LABOUR:
0125
Stone mason (for plain work) 2nd class
Day
0.448
273.00
0100
Bandhani
Day
0.336
260.00
0114
Beldar
Day
0.336
247.00
0115
Coolie
Day
0.336
247.00
0101
Bhisti
Day
0.336
260.00
1237
Cutting sand stone slab by mechanical device
metre
4.00
8.00
9999
Scaffolding
L.S.
19.76
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.018
4145.53
(Rate as per item No. 3.8 of SH- mortar)
Total:
Add water charges @ 1% on
2007.55
Add C.P & OH @15% on
2027.63
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2331.77
Rs 2331.75

Item Code: 7.23.2.5

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- Red sand stone - exposed face machine cut
with rough backg: 30 mm thick
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 30 cudm. +
Add wastage @ 33.3% - 9.99cudm.
Total - 39.99 cudm.
1160
Cost of stone
10 cu
39.99
60.00
2216
Carriage of stone @ 2.30kg/cudm
tonne
0.092
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
2.70
273.00
0102
Blacksmith 1st class
Day
0.064
301.00
0114
Beldar
Day
0.448
247.00
0115
Coolie
Day
0.224
247.00
0101
Bandhani
Day
0.448
260.00
Fixing charges

DSR-12

Page 180 of 2298

0125
0101
0114
0115
0101
1237
9999
03.008

LABOUR:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab by mechanical device
Scaffolding
Cement mortar 1:3 (1 cement : 3 coarse sand)
(Rate as per item No. 3.8 of SH- mortar)

Day
Day
Day
Day
Day
metre
L.S.

0.448
0.336
0.336
0.336
0.336
4.00
19.76
0.018

273.00
260.00
247.00
247.00
260.00
8.00
1.49
4145.53

Add water charges @ 1% on

Total:
1925.09

Add C.P & OH @15% on

1944.34
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2235.99
Rs 2236.00

Item Code: 7.23.3.1

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face fine dressed
with rough backing: 70 mm thick.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 70 cudm. +
Add wastage @ 33.3% = 23.33 cudm.
Total = 93.33 cudm.
1161
Cost of stone
10 cu
93.33
65.00
2216
Carriage of stone @ 2.30kg/cudm
tonne
0.215
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
1.35
273.00
0102
Blacksmith 1st class
Day
0.032
301.00
0114
Beldar
Day
0.224
247.00
0115
Coolie
Day
0.112
247.00
0100
Bandhani
Day
0.224
260.00
Fixing charges
LABOUR:
0125
Stone mason (for plain work) 2nd class
Day
0.448
273.00
0100
Bandhani
Day
0.336
260.00
0114
Beldar
Day
0.336
247.00
0115
Coolie
Day
0.336
247.00
0101
Bhisti
Day
0.336
260.00
1237
Cutting sand stone slab thick by mechanical device
metre
4.00
8.00
9999
Scaffolding
L.S.
19.76
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.018
4145.53
(Rate as per item No. 3.8 of SH- mortar)
Total:
Add water charges @ 1% on
1781.96
Add C.P & OH @15% on
1799.78
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 2069.75
Rs 2069.75

Page 181 of 2298

Item Code: 7.23.3.2

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face fine dressed
with rough backing: 60 mm thick.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 60 cudm.
Add wastage @ 33.3% = 20 cudm.
Total = 80 cudm.
1161
Cost of stone
10 cu
80.00
65.00
2216
Carriage of stone @ 2.30kg/cudm
tonne
0.184
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
1.35
273.00
0102
Blacksmith 1st class
Day
0.032
301.00
0114
Beldar
Day
0.224
247.00
0115
Coolie
Day
0.112
247.00
0100
Bandhani
Day
0.224
260.00
Fixing charges
LABOUR:
0125
Stone mason (for plain work) 2nd class
Day
0.448
273.00
0100
Bandhani
Day
0.336
260.00
0114
Beldar
Day
0.336
247.00
0115
Coolie
Day
0.336
247.00
0101
Bhisti
Day
0.336
260.00
1237
Cutting sand stone slab thick by mechanical device
metre
4.00
8.00
9999
Scaffolding
L.S.
19.76
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.018
4145.53
(Rate as per item No. 3.8 of SH- mortar)
Total:
Add water charges @ 1% on
1692.90
Add C.P & OH @15% on
1709.83
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1966.30
Rs 1966.30

Item Code: 7.23.3.3

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face fine dressed
with rough backing: 50 mm thick .
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 50 cudm.
Add wastage @ 33.3% = 1,6.7 cudm.
Total = 66.7 cudm.
1161
Cost of stone
10 cu
66.70
65.00
2216
Carriage of stone @ 2.30 kg/cudm.
tonne
0.153
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
1.35
273.00
0102
Blacksmith 1st class
Day
0.032
301.00
0114
Beldar
Day
0.224
247.00
0115
Coolie
Day
0.112
247.00
0100
Bandhani
Day
0.224
260.00
Fixing charges

DSR-12

Page 182 of 2298

0125
0100
0114
0115
0101
1237
9999
03.008

LABOUR:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab thick by mechanical device
Scaffolding
Cement mortar 1:3 (1 cement : 3 coarse sand)
(Rate as per item No. 3.8 of SH- mortar)

Day
Day
Day
Day
Day
metre
L.S.

0.448
0.336
0.336
0.336
0.336
4.00
19.76
0.018

273.00
260.00
247.00
247.00
260.00
8.00
1.49
4145.53

Add water charges @ 1% on

Total:
1604.03

Add C.P & OH @15% on

1620.07
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1863.08
Rs 1863.10

Item Code: 7.23.3.4

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face fine dressed
with rough backing: 40 mm thick .
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 40 cudm.
Add wastage @ 33.3% = 13.3 cudm.
Total = 53.3 cudm.
1161
Cost of stone
10 cu
53.30
65.00
2216
Carriage of stone @ 2.30 kg/cudm.
tonne
0.123
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
1.35
273.00
0102
Blacksmith 1st class
Day
0.032
301.00
0114
Beldar
Day
0.224
247.00
0115
Coolie
Day
0.112
247.00
0100
Bandhani
Day
0.224
260.00
Fixing charges
LABOUR:
0125
Stone mason (for plain work) 2nd class
Day
0.448
273.00
0101
Bandhani
Day
0.336
260.00
0114
Beldar
Day
0.336
247.00
0115
Coolie
Day
0.336
247.00
0101
Bhisti
Day
0.336
260.00
1237
Cutting sand stone slab thick by mechanical
metre
4.00
8.00
device
9999
Scaffolding
L.S.
19.76
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.018
4145.53
(Rate as per item No. 3.8 of SH- mortar)
Total:
Add water charges @ 1% on
1514.60
Add C.P & OH @15% on
1529.75
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 1759.21
Rs 1759.20

Page 183 of 2298

Item Code: 7.23.3.5

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face fine dressed
with rough backing: 30 mm thick.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 30 cudm. +
Add wastage @ 33.3% = 9.99 cudm.
Total = 39.99 cudm.
1161
Cost of stone
10 cu
39.99
65.00
2216
Carriage of stone @ 2.30 kg/cudm.
tonne
0.092
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
1.35
273.00
0102
Blacksmith 1st class
Day
0.032
301.00
0114
Beldar
Day
0.224
247.00
0115
Coolie
Day
0.112
247.00
0100
Bandhani
Day
0.224
260.00
Fixing charges
LABOUR:
0125
Stone mason (for plain work) 2nd class
Day
0.448
273.00
0100
Bandhani
Day
0.336
260.00
0114
Beldar
Day
0.336
247.00
0115
Coolie
Day
0.336
247.00
0101
Bhisti
Day
0.336
260.00
1237
Cutting sand stone slab thick by mechanical device
metre
4.00
8.00
9999
Scaffolding
L.S.
19.76
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.018
4145.53
(Rate as per item No. 3.8 of SH.Mortar)
Total:
Add water charges @ 1% on
1425.67
Add C.P & OH @15% on
1439.93
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1655.92
Rs 1655.90

Item Code: 7.23.4.1

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face machine cut
with rough backg: 70 mm thick.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 70 cudm.
Add wastage @ 33.3% = 23,.33 cudm.
Total = 93.33 cudm.
1161
Cost of stone
10 cu
93.33
65.00
2216
Carriage of stone @ 2.30kg/cudm
tonne
0.215
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
2.70
273.00
0102
Blacksmith 1st class
Day
0.064
301.00
0114
Beldar
Day
0.448
247.00
0115
Coolie
Day
0.224
247.00
0100
Bandhani
Day
0.448
260.00

DSR-12

Page 184 of 2298

0125
0100
0114
0115
0101
1237
9999
03.008

Fixing charges
LABOUR:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab thick by mechanical device
Scaffolding
Cement mortar 1:3 (1 cement : 3 coarse sand)
(Rate as per item No. 3.8 of SH.Mortar)

Day
Day
Day
Day
Day
metre
L.S.

0.448
0.336
0.336
0.336
0.336
4.00
19.76
0.018

273.00
260.00
247.00
247.00
260.00
8.00
1.49
4145.53

Add water charges @ 1% on

Total:
2301.38

Add C.P & OH @15% on

2324.39
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2673.05
Rs 2673.05

Item Code: 7.23.4.2

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face machine cut
with rough backg: 60 mm thick.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 60 cudm.
Add wastage @ 33.3% = 20 cudm.
Total = 80 cudm.
1161
Cost of stone
10 cu
80.00
65.00
2216
Carriage of stone @ 2.30kg/cudm
tonne
0.184
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
2.70
273.00
0102
Blacksmith 1st class
Day
0.064
301.00
0114
Beldar
Day
0.448
247.00
0115
Coolie
Day
0.224
247.00
0100
Bandhani
Day
0.448
260.00
Fixing charges
LABOUR:
0125
Stone mason (for plain work) 2nd class
Day
0.448
273.00
0100
Bandhani
Day
0.336
260.00
0114
Beldar
Day
0.336
247.00
0115
Coolie
Day
0.336
247.00
0101
Bhisti
Day
0.336
260.00
1237
Cutting sand stone slab thick by mechanical device
metre
4.00
8.00
9999
Scaffolding
L.S.
19.76
1.49
(Rate as per item No. 3.8 of SH.Mortar)
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.018
4145.53
Total:
Add water charges @ 1% on
2212.32
Add C.P & OH @15% on
2234.44
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 2569.61
Rs 2569.60

Page 185 of 2298

Item Code: 7.23.4.3

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face machine cut
with rough backg: 50 mm thick .
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 50 cudm.
Add wastage @ 33.3% = 16.7 cudm.
Total = 66.7 cudm.
1161
Cost of stone
10 cu
66.70
65.00
2216
Carriage of stone @ 2.30 kg/cudm.
tonne
0.153
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
2.70
273.00
0102
Blacksmith 1st class
Day
0.064
301.00
0114
Beldar
Day
0.448
247.00
0115
Coolie
Day
0.224
247.00
0100
Bandhani
Day
0.448
260.00
Fixing charges
LABOUR:
0125
Stone mason (for plain work) 2nd class
Day
0.448
273.00
0100
Bandhani
Day
0.336
260.00
0114
Beldar
Day
0.336
247.00
0115
Coolie
Day
0.336
247.00
0101
Bhisti
Day
0.336
260.00
1237
Cutting sand stone slab thick by mechanical
metre
4.00
8.00
device
9999
Scaffolding
L.S.
19.76
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.018
4145.53
(Rate as per item No. 3.8 of SH.Mortar)
Total:
Add water charges @ 1% on
2123.45
Add C.P & OH @15% on
2144.68
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2466.38
Rs 2466.40

Item Code: 7.23.4.4

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face machine cut
with rough backg: 40 mm thick .
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFinished work = 40 cudm.
Add wastage @ 33.3% = 1,3.3 cudm.
Total = 53.3 cudm.
1161
Cost of stone
10 cu
53.30
65.00
2216
Carriage of stone @ 2.30 kg/cudm.
tonne
0.123
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
LABOUR:
0125
Stone mason (plane work) 2nd class
Day
2.70
273.00
0102
Blacksmith 1st class
Day
0.064
301.00
0114
Beldar
Day
0.448
247.00
0115
Coolie
Day
0.224
247.00

DSR-12

Page 186 of 2298

0100

0125
0100
0114
0115
0101
1237
9999
03.008

Bandhani
Fixing charges
LABOUR:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab thick by mechanical
device
Scaffolding
Cement mortar 1:3 (1 cement : 3 coarse sand)
(Rate as per item No. 3.8 of SH.Mortar)

Day

0.448

260.00

Day
Day
Day
Day
Day
metre

0.448
0.336
0.336
0.336
0.336
4.00

273.00
260.00
247.00
247.00
260.00
8.00

L.S.

19.76
0.018

1.49
4145.53

Add water charges @ 1% on

Total:
2034.02

Add C.P & OH @15% on

2054.36
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2362.51
Rs 2362.50

Item Code: 7.23.4.5

Stone work for wall lining work back filled with 12mm C.M 1 :3 CS, pointing in c.m 1:2:- White sand stone-exposed face machine cut
with rough backg: 30 mm thick
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 1 sqm.
MaterialsFinished work = 30 cudm.
Add wastage @ 33.3% = 9.99 cudm.
Total = 39.99 cudm.
1161
Cost of stone
10 cu
39.99
65.00
2216
Carriage of stone @ 2.30 kg/cudm.
tonne
0.092
77.87
9999
Extra for using white cement
L.S.
26.91
1.49
Dressing charges
Labour:
0125
Stone mason (plane work) 2nd class
Day
2.70
273.00
0102
Blacksmith 1st class
Day
0.064
301.00
0114
Beldar
Day
0.448
247.00
0115
Coolie
Day
0.224
247.00
0100
Bandhani
Day
0.448
260.00
Fixing charges
Labour:
0125
Stone mason (for plain work) 2nd class
Day
0.448
273.00
0100
Bandhani
Day
0.336
260.00
0114
Beldar
Day
0.336
247.00
0115
Coolie
Day
0.336
247.00
0101
Bhisti
Day
0.336
260.00
1237
Cutting sand stone slab thick by mechanical
metre
4.00
8.00
device
9999
Scaffolding
L.S.
19.76
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.018
4145.53
(Rate as per item No. 3.8 of SH.Mortar)
Total:
Add water charges @ 1% on
1945.09
Add C.P & OH @15% on
1964.54
Cost for 1.00 Sqm

DSR-12

Page 187 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 2259.22
Rs 2259.20

Item Code: 7.24

Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m.
Details of Cost for : 0.01 Cum
Code
Description
Unit
Quantity
Details of cost for 10 cudm.
9999
Labour and materials
L.S.
8.97
Add water charges @ 1% on

Rate
1.49
Total:
13.37

Add C.P & OH @15% on

13.50
Cost for 0.01 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 1553.00
Rs 1552.00

Item Code: 7.25

P/F stainless steel cramps in wall lining with CM 1:2
Code

Description
Details of cost for one cramp
MATERIALS:
Stainless steel cramp
10x0.064x0.025x0.006= 9.60x10^-5
10x0.025x0.025x0.006= 3.70x10^-5
=13.3 x 10^-5
Less hole
10x0.024x0.010x0.006= 1.40x10^-5
11.9x10^-5x7850=0.934kg
Add wastage @ 5% =0.047 kg
Total = 0.981kg

7339
9999
03.007

Stainless steel cramp

Carriage
Cement mortar 1:2 (1 cement : 2 coarse)
(Rate as per this No. 3.7)
Labour for fixing m position

9999

Details of Cost for : 0.934 Kg

Unit
Quantity

Rate

kilog
L.S.

0.981
3.90
0.001

320.00
1.49
4863.86

L.S.

65.00

1.49
Total:
421.44

Add water charges @ 1% on

Add C.P & OH @15% on

425.65
Cost for 0.934 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 524.09
Rs 524.10

Item Code: 7.26

P/F stone dowels 10 x 5 x 2.50 Cm cut to double wedge shape as per design.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost for one dowel
9999
Cost of stone including carriage
L.S.
9.10
Labour for dressing dowel cutting chase and fixing etc.
9999
Labour for dressing dowel cutting chase and fixing etc.
L.S.
5.33

DSR-12

Rate
1.49
1.49

Page 188 of 2298

03.007

Cement mortar 1:2 (1 cement : 2 coarse)

( Rate as per items No. 3.7)

0.001

4863.86

Add water charges @ 1% on

Total:
26.36

Add C.P & OH @15% on

26.62
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 30.61
Rs 30.60

Item Code: 7.27

P/F copper pins 7.5cm long 6mm dia in wall lining in CM 1:2
Code

0873
9999
03.007
9999

Description
Details of cost for one copper pinMATERIALSCopper pins 6 mm dia 7.5 cm long
Labour for making pin in to required shape and size, cutting
chases in stone and fixing in
Cement mortar 1:2 (1 cement : 2 coarse)
Sundries including hire charges of hand cut machine etc.

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each
L.S.

1.00
3.90

10.00
1.49

L.S.

0.001
1.95

4863.86
1.49

Add water charges @ 1% on

Total:
23.58

Add C.P & OH @15% on

23.82
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 27.39
Rs 27.40

Item Code: 7.28.1.1

P/F sloping chajja of stone 40mm thick & upto 80cm wide beyond the wall as measured along the slope in CM 1:4 Red sand stone:
With F.P.S. Bricks.
Details of Cost for : 2.00 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for a chajja 2.00 sqm. (finished work)
MATERIALSRed sand stone slab 40mm (average thickness)-Chisel dressed
80cm sloping length
plus 20cm bearing Area = 2.5xl.00=2.50sqm.
1164
Cost of stone
sqm
2.75
155.00
2216
Carriage @ 2.3kg/cudm.
tonne
0.253
77.87
Labour for dressing:
0125
Mason (2nd class)
Day
0.50
273.00
1002
Anchoring steel bars 12mm dia. 45cm long 5 nos. @ 0.80kg/m quint
0.02
4100.00
= 0.02q
9999
Cutting threads and cost of nuts, washers, etc.
L.S.
67.34
1.49
03.012
Cement Mortar 1:2 (1 cement : 2 stone dust)
0.009
4678.61
9999
Pigment
L.S.
6.24
1.49
9999
Extra cost of white cement
L.S.
26.91
1.49
LABOUR:
0125
Stone mason (Plain) 2nd class
Day
1.00
273.00
0114
Beldar
Day
1.50
247.00
9999
Scaffolding and sundries etc.
L.S.
16.12
1.49
Brick cover support 4 courses with bricks of class designation
75

DSR-12

Page 189 of 2298

9999

06.004.01

4x7+5+5=38cm girth 2.5m length

=38cmx2.5m=95cm
Cost of Brick cover support.
L.S.
Brick work in triangular gap above cover with
bricks of class designation 7.5 in cement
mortar 1:4-1/2x2.5x0.2x0.07=0.018cum.
Brick work with FPS bricks of class designation 75 in super Cum
structure above plinth level u

104.00

1.49

0.018

4067.84

Add water charges @ 1% except on [A] i.e on

Total:
1678.78

Add C.P & OH @15% except on [A] i.e on

1695.57
Cost for 2.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1011.57
Rs 1011.55

Item Code: 7.28.2.1

P/F sloping chajja of stone 40mm thick & upto 80cm wide beyond the wall as measured along the slope in CM 1:4 White sand stone
: With F.P.S. bricks.
Details of Cost for : 2.00 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for a chajja 2.00 sqm. (finished work)
MATERIALSWhite sand stone slab 40mm (average thickness)-Chisel
dressed 80cm sloping length plus 20cm bearing Area =
2.5x1.00=2.50sqm.
1165
Cost of stone
sqm
2.75
170.00
2216
Carriage @ 2.3kg/cudm.
tonne
0.253
77.87
Labour for dressing:
0125
Mason (2nd class)
Day
0.50
273.00
1002
Anchoring steel bars 12mm dia. 45cm long 5 nos. @ 0.80kg/m quint
0.02
4100.00
= 0.02q
9999
Cutting threads and cost of nuts, washers, etc.
L.S.
67.34
1.49
03.012
Cement Mortar 1:2 (1 cement : 2 stone dust)
0.009
4678.61
9999
Pigment
L.S.
6.24
1.49
9999
Extra cost of white cement
L.S.
26.91
1.49
LABOUR:
0125
Stone mason (Plain) 2nd class
Day
1.00
273.00
0114
Beldar
Day
1.50
247.00
9999
Scaffolding and sundries etc.
L.S.
16.12
1.49
Brick cover support 4 courses with bricks of class designation
75
4x7+5+5=38cm girth 2.5m length
=38cmx2.5m=95cm
9999
Cost for Brick cover support .
L.S.
104.00
1.49
Brick work in triangular gap above cover with bricks of class
designation 5 in cement mortar
1:4-1 /2x2.5x0.2x0.07=0.018cum.
06.004.01 Brick work with FPS bricks of class designation 75 in super Cum
0.018
4067.84
structure above plinth level u
Total:
Add water charges @ 1% except on [A] i.e on
1720.03
Add C.P & OH @15% except on [A] i.e on
1737.23
Cost for 2.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 1035.52
Rs 1035.50

Page 190 of 2298

Item Code: 7.29.1

P/F horizontal chajja of stone 40 mm thick and upto 80 cm in C.M. 1 :4 CS :- Red sand stone.
Details of Cost for : 1.875 Sqm
Code
Description
Unit
Quantity
Details of cost for (2.5xO.75m) 1.875 sqm.
MATERIALSTaking 2.5mx75cm projection + 15cm bearing
= 2.5x0.9 = 2.25 sqm.
1164
Cost of stone
sqm
2.25
2216
Carriage @ 2.3kg/cudm.
tonne
0.227
Labour for dressing:
0125
Mason (2nd class) for stone work
Day
0.45
9999
Mortar for pointing 1:2
L.S.
53.82
9999
Pigment
L.S.
6.24
9999
Extra cost of white cement
L.S.
26.91
Labour:
0125
Mason (2nd class)
Day
0.60
0114
Beldar
Day
0.80
9999
Scaffolding and sundries etc.
L.S.
13.52
Add water charges @ 1% on

Rate

155.00
77.87
273.00
1.49
1.49
1.49
273.00
247.00
1.49
Total:
1000.41

Add C.P & OH @15% on

1010.41
Cost for 1.875 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 619.72
Rs 619.70

Item Code: 7.29.2

P/F horizontal chajja of stone 40 mm thick and upto 80 cm in C.M. 1 :4 CS :- White sand stone.
Details of Cost for : 1.875 Sqm
Code
Description
Unit
Quantity
Details of cost for (2.5xO.75m) 1.875 sqm.
MATERIALSTaking 2.5mx75cm projection + 15cm bearing
= 2.5x0.9 = 2.25 sqm.
1165
White sand stone slab 40 mm thick (un-dressed)
sqm
2.25
2216
Carriage @ 2.3kg/cudm.
tonne
0.227
Labour for dressing:
0125
Mason (2nd class) for stone work
Day
0.45
9999
Mortar for pointing 1:2
L.S.
53.82
9999
Pigment
L.S.
6.24
9999
Extra cost of white cement
L.S.
26.91
Labour:
0125
Mason (2nd class)
Day
0.60
0114
Beldar
Day
0.80
9999
Scaffolding and sundries etc.
L.S.
13.52
Add water charges @ 1% on

Rate

170.00
77.87
273.00
1.49
1.49
1.49
273.00
247.00
1.49
Total:
1034.16

Add C.P & OH @15% on

1044.50
Cost for 1.875 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 640.63
Rs 640.60

Page 191 of 2298

Item Code: 7.30

30 mm red sand stone sun-shade (chisel-dressed) supported on stone brackets, fixed in walls with CM 1 : 4 CS.

Code

1166
2216
9999
0125
0114

Description
Detail of cost for window 1.6m length and 0.70m width = 1.12
sqm.
MATERIALS:
Red stone slab (chisel dressed) 30mm average thickness
overall width 0.70+0.15=0.85 metres
Total area = 1.6x0.85=1.36sqm.
Red stone brackets (chisel dressed) 30mm average thickness
over all width of brackets
0.53+0.23=0.76m
2x0.3x0.76=0.46
Total 1.36+0.46 =1.82sqm.
Add wastage @10% = 0.18sqm.
Total = 2.00 sqm.
carriage
Cement mortar 1 :4
Labour for dressing and fixing
Stone mason (plainy2nd class
Beldar

Details of Cost for : 1.12 Sqm

Unit
Quantity

sqm
tonne
L.S.
Day
Day

Rate

2.00
0.14
13.52

120.00
77.87
1.49

0.86
0.50

273.00
247.00
Total:
629.32

Add water charges @ 1% on

Add C.P & OH @15% on

635.61
Cost for 1.12 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 652.63
Rs 652.65

Item Code: 7.31

P/F red sand stone brackets 55x22.5x45 cm sunk & moulded i/c P/F with 4 No. gun metal cramps 25 x 6 mm, 30 cm long.

Code

1160
2216

0125
0102
0114
0115
0100
0373

0125
0102
0114
0115

DSR-12

Description
Details of cost for 1 bracket
Quantity of stone for 1 bracket
1 x 55 x 22.5 x 45cm = 0.056cum or 56 cudm.
Red sand stone = 56 cudm.
Add wastage 10% = 5.6 cudm.
Total =61.6 cudm.
Cost of stone
Carriage @ 2.3kg/ cudm.
Dressing charges
LABOUR
Stone mason (plain work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Cost of Gun metal cramps 25x6mm x30 cm long
Fixing charges
LABOUR
stone mason (plain work) 2nd class
Blacksmith 1st class
Beldar
Coolie

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

10 cu
tonne

61.60
0.14

60.00
77.87

Day
Day
Day
Day
Day
each

1.7926
0.037
0.271
0.1355
0.271
4.00

273.00
301.00
247.00
247.00
260.00
70.00

Day
Day
Day
Day

0.2464
0.0336
0.1232
0.1232

273.00
301.00
247.00
247.00

Page 192 of 2298

0101
0101
9999
9999
0126

Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
Extra labour for ornamental finish :
Stone mason (ornamental)

Day
Day
L.S.
L.S.

0.1232
0.1232
15.29
45.14

260.00
260.00
1.49
1.49

Day

0.95

301.00
Total:
1910.18

Add water charges @ 1% on

Add C.P & OH @15% on

1929.28
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2218.67
Rs 2218.65

Item Code: 7.32.1

Stone work, plain in copings, cornices, string courses and plinth courses, in CM 1:6 CS: Red sand stone.
Details of Cost for : 0.0675 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for 10 cornices (30cm long 30cm deep and
7.5cm project-iron) = 67.5cudm. or 0.0675cum
(For better accuracy)
MATERIALS:
Stone work plain ashlar cyclopean
3x3x0.75 - 6.75 cudm
07.012.01.1 Stone work in plain ashlar in SS upto floor 5 level in CM 1:6
0.0675
22286.00
One face dressed Red sand st
9999
(A) Extra for using white cement
L.S.
53.30
1.49
Extra labour for making the cornices
0125
(A) Stone mason (2nd class)
Day
0.70
273.00
0114
(A) Beldar
Day
0.70
247.00
Total:
Add water charges @ 1% except on [A] i.e on
443.42
Add C.P & OH @15% except on [A] i.e on
447.85
Cost for 0.0675 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 29916.15
Rs 29914.00

Item Code: 7.32.2

Stone work, plain in copings, cornices, string courses and plinth courses, in CM 1:6 CS: White sand stone.
Details of Cost for : 0.0675 Cum
Code
Description
Unit
Quantity
Details of cost for 10 cornices (30cm long 30cm deep and
7.5cm project-iron) = 67.5cudm.
(10 cornices taken for more ccuaracy)
MATERIALS:
Stone work plain ashlar cyclopean 10x3x3x0.75 = 67.5 cudm
or 0.0675cum
07.012.01.2 Stone work in plain ashlar in SS upto floor 5 level in CM 1:6
One face dressed White sand
9999
(A) Extra for using white cement
L.S.
Extra labour for making the cornices
0125
(A) Stone mason (2nd class)
Day
0114
(A) Beldar
Day

DSR-12

Rate

0.0675

23061.00

53.30

1.49

0.70
0.70

273.00
247.00
Total:

Page 193 of 2298

Add water charges @ 1% except on [A] i.e on

443.42

Add C.P & OH @15% except on [A] i.e on

447.85
Cost for 0.0675 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 30691.11
Rs 30690.00

Item Code: 7.33.1

P/F stone jali 40 mm thick throughout in CM 1:3 Red sand stone.
Code

1164
2216

0125
0114
9999

Details of Cost for : 1.00 Sqm

Unit
Quantity

Description
Details of cost for lsqmMATERIALS:
Red sand stone slab 40mm=1.00 sqm
Add 10% wastage Total =0.10/1.10
Red sand stone slab 40mm
Carriage of stone slab
LABOUR:
For making, dressing and fixing
Mason (plain) 2nd class
Beldar
Mortar and Sundries

Rate

sqm
tonne

1.10
0.101

155.00
77.87

Day
Day
L.S.

12.70
8.45
80.73

273.00
247.00
1.49
Total:
5852.90

Add water charges @ 1% on

Add C.P & OH @15% on

5911.43
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 6798.14
Rs 6798.15

Item Code: 7.33.2

P/F stone jali 40 mm thick throughout in CM 1:3 White sand stone.
Code

1165
2216

0125
0114
9999

Description
Details of cost for lsqmMATERIALS:
White sandstone slaJx40mm = 1.00 sqm
Add 10% wastage Total =0.10/1.10 sqm
White sand stone slab 40mm
Carriage of stone slab
LABOUR:
For making, dressing and fixing
Mason (plain) 2nd class
Beldar
Mortar and Sundries

Details of Cost for : 1.00 Sqm

Unit
Quantity

Rate

sqm
tonne

1.10
0.101

170.00
77.87

Day
Day
L.S.

12.70
8.45
80.73

273.00
247.00
1.49
Total:
5869.40

Add water charges @ 1% on

Add C.P & OH @15% on

5928.09
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 6817.30
Rs 6817.30

Item Code: 7.34

DSR-12

Page 194 of 2298

Extra for laying stone work in or under water and/or liquid mud i/c pumping/bailing out water and removing slush.

Code

0011
0114

Description
Details of cost for depth of water 0.30m.
Quantity of concrete = 14 cum.
pumping hours = 3 hrs. on 0.375day.
Beldar for cleaning slush

Details of Cost for : 4.20 units

Unit
Quantity

Day
Day

0.375
4.00

Add water charges @ 1% on

Rate

500.00
247.00
Total:
1175.50

Add C.P & OH @15% on

1187.26
Cost for 4.20 units
Rate per Units:
Rate as per DSR-12:

Rs 325.08
Rs 325.10

Item Code: 7.35

Extra for stone work in or uder foul position .
Code
0123
0124
0114
0115

Description
Extra labour due to slow progressMason 1st class
Mason 2nd class
Beldar
Coolie

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day
Day
Day

0.02
0.02
0.25
0.15

Add water charges @ 1% on

Rate
301.00
273.00
247.00
247.00
Total:
110.28

Add C.P & OH @15% on

111.38
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 128.09
Rs 128.10

Item Code: 7.36

Wall lining butch work with Dholpur stone 40mm thick rough facing on the exposed surface with stone strips
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Dholpur stone 40mm thick
Wall face = l.OOsqm.
Deduct for embed within 3x0.04x0.10=0.12 sqm = 0.88sqm.

1165

1163

2216
1237

DSR-12

Add wastage 5% = 0.04sqm.

Total = 0.92 sqm.
Cost of stone
75mm thick 3x0.04x1.0 = 0.12 sqm.
Add wastage 5% = 0.01 sqm.
Total =0.13 sqm.
Cost of stone
Carriage of stone
0.92x0.04 =0.0368 cum.
0.13x0.075 =0.0100 cum.
= 0.0468 cum. or 468 cudm.
468 cudm @ 2.3 kg/cudm = 108 kg = 0.108 tonne
Carriage of stone
Cutting stips of stone and giving rough finish
assuming 50mm thick strips 20x1.0 = 20 metre

Rate

sqm

0.92

170.00

sqm

0.13

280.00

0.108
20.00

77.87
8.00

tonne
metre

Page 195 of 2298

03.008

18.078
9999
0126
0125
0114
0101
9999

Mortar with coarse sand 1:3 for

(a) stone backing 12mm thick = 0.0144 cum.
(b) for fixing of stone = 0.40/25 - 0.0160 cum.
Total = 0.0304 cum.
Cement mortar 1:3 (1 cement : 3 coarse sand)
Cutting chases and making good with mortar after insurting
stone etc.
Making chases up to 7.5x7.5 cm in walls i.. after housing G.I.
pipe etc.
White cement and pigment for pointing
LABOUR:
Mason 1 st class
Mason 2nd class
Beldar
Bhisti
Sundries and scaffolding brushes etc.

0.0304

4145.53

3.00

64.49

L.S.

40.43

1.49

Day
Day
Day
Day
L.S.

0.25
0.25
0.50
0.03
26.91

301.00
273.00
247.00
260.00
1.49
Total:
862.37

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

870.99
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1195.11
Rs 1192.45

Item Code: 7.37.1.1

Stone work for wall lining (Veneer work) over 12 mm thick bed of C.M. 1 : 3 CS & jointed with CM 1:2 SD. Kota stone slabs exposed
fsce dressed and rubbed: 25 mm thick.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
Materials :
25mm thids. kota stoneslabs = 10 sqm.
Add 15% wistage = 1.50 sqm
Total 11.50 sqm
1169
Kotastone slab 25mm thick.
Sqm
11.50
175.00
2216
Carriage
tonne
0.67
77.87
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.144
4145.53
(Rate as per item 3.8 of S.H. mortar)
9999
Cement mortar for pointing.
L.S.
40.43
1.49
Labour:
0125
Mason 2nd class
Day
6.50
273.00
0114
Beldar
Day
6.50
247.00
0115
Coolie
Day
4.30
247.00
0139
Beldar for rubbing and polishing (special rate)
Day
10.80
260.00
9999
Sundries
L.S.
111.54
1.49
Total:
Add water charges @ 1% on
10138.16
Add C.P & OH @15% on
10239.54
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1177.55
Rs 1177.50

Item Code: 7.38.1.1

Stone tile work for wall lining:- 8 mm thick :- Granite stone of any colours.
Code

DSR-12

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Page 196 of 2298

2750
9999
03.008
0367
9999
0123
0114
9999
9999

MATERIALS :
ton thickgranite stone tile =
10.OOsqm.+Add 2.5% westage = 0.25 sqm
Ttofal =210
sqm
Carriage of granite tiles
L.S.
Cement mortar 1:3 (1 cement : 3 coarse sand)
(Rate as per item 3.8 of S.H. mortar)
Cement slurry @ 3.3 kg/sqm.
tonne
Mortar for pointing in white cement
L.S.
Labour for placing and fixing :
Mason 1st class
Day
Beldar
Day
Granular sand particles mixed with araldite to be pasted on L.S.
each side to form interlocking
Sundries
L.S.

10.25
40.04
0.14

675.00
1.49
4145.53

0.033
25.74

5000.00
1.49

7.70
7.70
260.00

301.00
247.00
1.49

171.60

1.49
Total:
12624.81

Add water charges @ 1% on

Add C.P & OH @15% on

12751.06
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1466.37
Rs 1466.35

Item Code: 7.38.1.2

Stone tile work for wall lining:- 8 mm thick :- Raj Nagar/ Udaipur/ Zebra stone.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS :
8mm thick Raj Nagar white stone tile =
10.00sqm.+Add 2.5% westage = 0.25 sqm
7439
Total = 10.25sqm.
sqm
10.25
9999
Carriage of Raj Nagar white stone tiles
L.S.
40.04
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.14
(Rate as per item 3.8 of S.H. mortar)
0367
Cement slurry @ 3.3 kg/sqm.
tonne
0.033
9999
Mortar for pointing in white cement
L.S.
25.74
Labour for placing and fixing :
0123
Mason 1st class
Day
7.70
0114
Beldar
Day
7.70
9999
Granular sand particles mixed with araldite to be pasted on L.S.
260.00
each side to form interlocking
9999
Sundries
L.S.
171.60
Add water charges @ 1% on

Rate

480.00
1.49
4145.53
5000.00
1.49
301.00
247.00
1.49
1.49
Total:
10626.06

Add C.P & OH @15% on

10732.32
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1234.22
Rs 1234.20

Item Code: 7.39

Extra for wall lining above 10 m hieght and 3 m or part.
Code
9999

DSR-12

Description
MATERIALS
Scaffolding

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

L.S.

1.49

215.28

Page 197 of 2298

0123
0114
0101
9999

Mason 1st class

Belder
Bhisti
Sundries

Day
Day
Day
L.S.

0.30
0.30
0.15
28.60

Add water charges @ 1% on

301.00
247.00
260.00
1.49
Total:
566.78

Add C.P & OH @15% on

572.45
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 65.83
Rs 65.85

Item Code: 7.40.1

P/F dry cladding upto 10 m ht. with 30 mm thick gang saw cut stone with (machine cut edges) of uniform colour and size 1m x 1m,
fixed to strutural steel frame work: Red sand stone.

Code

Details of Cost for : 3.00 Sqm

Unit
Quantity

Description

Rate

MATERIALSRed sand stoge = 3 X1.00 sqm = 3.00 sqm

Add wastage 25% = 0.75 sqm total=3.75
Add 20% wastage infixing due to broken edge = 0.60 sqm

8683
1237
2216
9999
9999
9999
0126
0114
0114
9999
0116
0114
9999
9999

Total = 4.35 sqm

Red sand stone gang saw cut 30mm thick.
sqm
Cutting marble or sand stone slab upto 50 mm thick by metre
mechanical device
Carriage of stone @ 2.30kg/cudm
tonne
backing rod
L.S.
Fixing including weather sealant and removing
L.S.
Double scafolding
L.S.
Mason (for ornamental stone work) 1 st class
Day
Beldar
Day
Labour for lifting stone
Beldar
Day
Silicon gun/ pump etc.
L.S.
Labour for sealing
Fitter (grade 1)
Day
Beldar
Day
Sundries
L.S.
Rubing and polishing vertical surface of stone
L.S.

4.35
10.00

400.00
8.00

0.215
30.68
153.40
204.75
2.00
4.00

77.87
1.49
1.49
1.49
301.00
247.00

1.00
204.75

247.00
1.49

0.25
0.50
204.75
51.22

301.00
247.00
1.49
1.49
Total:
5138.33

Add water charges @ 1% on

Add C.P & OH @15% on

5189.71
Cost for 3.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1989.39
Rs 1989.40

Item Code: 7.40.2

P/F dry cladding upto 10 m ht. with 30 mm thick gang saw cut stone with (machine cut edges) of uniform colour and size 1m x 1m,
fixed to strutural steel frame work: White sand stone.

Code

Description

Details of Cost for : 3.00 Sqm

Unit
Quantity

Rate

MATERIALS-

DSR-12

Page 198 of 2298

White sand stone = 3.00sqm

Add wastage 25% = 0.75 sqm =3.75 sqm.
Add 20% wastage infixing due to broken edge = 0.60 sqm

8684
1237
2216
9999
9999
9999
0126
0114
0114
9999
0116
0114
9999
9999

Total = 4.35 sqm

White sand stone gang saw cut 30mm thick.
sqm
Cutting marble or sand stone slab upto 50 mm thick by metre
mechanical device
Carriage of stone @ 2.30kg/cudm
tonne
backing rod
L.S.
Fixing including weather sealant and removing
L.S.
Double scafolding
L.S.
Mason (for ornamental stone work) 1st class
Day
Beldar
Day
Labour for lifting stone
Beldar
Day
Silicon gun/ pump etc.
L.S.
Labour for sealing
Fitter (grade 1)
Day
Beldar
Day
Sundries
L.S.
Rubing and polishing vertical surface of stone cladding
L.S.

4.35
10.00

435.00
8.00

0.215
30.68
153.40
204.75
2.00
4.00

77.87
1.49
1.49
1.49
301.00
247.00

1.00
204.75

247.00
1.49

0.25
0.50
204.75
51.22

301.00
247.00
1.49
1.49
Total:
5290.58

Add water charges @ 1% on

Add C.P & OH @15% on

5343.49
Cost for 3.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2048.34
Rs 2048.35

Item Code: 7.41

P/F structural steel frame (for dry cladding with 30 mm thick gang saw with machine cut eges sand stone)on walls at all heights
using M.S. square/ retangular tube.
Details of Cost for : 100.78 Kg
Code
Description
Unit
Quantity
Rate
Details of cost for 9 sqm or 110.78 kg.
M.S. tube 50x25x18mm
vertical=4x3.0=12.00m.
Vertical=3x4x0.93=11.16m
Total= 23.16m.
Add 10% wastage = 2.32
Total 25.48 [email protected] kg/m=51.47 kg
4009
Mild steel tubes
kilog
51.47
48.00
Angle iron 50x50x6mm
16x0.60=9.60
16x0.15=2.40
Total= 12.00
Add 10% wastage = 1.20m
Total= 13.20m
@4.50kg/m=59.40kg or 0.594 q
1007
Cost of angle iron
quint
0.594
4250.00
Cement concrete 1:2:4
= 16x0.15x0.15x0.15=0.054 cum
04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.331
4514.03
Coarse sand, 20mmstone a
Making holes in brick work=16nos.
LABOUR
0123
Mason 1st class
Day
0.26
301.00

DSR-12

Page 199 of 2298

0124
0114

1215
0102
0100
0114
9999

13.052.01
9999

Mason 2nd class

Beldar
Welding for frame welding
16x(2.5+5+2.5+5) = 240 cm
For hold fast 16x20cm = 320cm
Total =560cm
Welding by electric plant
LABOUR
Blacksmith 1 st class
Bandhani
Beldar
Sundries
Painting with epoxy paint over and including priming coat
area 22.80x0.15 = 3.42
12x0.2=2.40
Total = 5.82sqm
Finishing with Epoxy paint (two or more coats) appropriate
priming coat, On steel work
For labour scaffocaling etc

Day
Day

0.26
2.00

273.00
247.00

cm

560.00

1.50

Day
Day
Day
L.S.

1.34
0.67
4.92
80.73

301.00
260.00
247.00
1.49

5.82

105.51

80.73

1.49
Total:
8511.66

L.S.

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

8596.78
Cost for 100.78 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 119.02
Rs 119.00

Item Code: 7.42

P/F adjustable stainless steel cramps with stainless steel nuts and bolts etc.
Code
8698

0103
0124
0114
9999
9999

Description
Stainless steel cramps with nuts, bolts and washer for dry
stone cladding .
LABOUR
for making holes, recesses etc. and fixing of stainless stul
cramps
Blacksmith 2nd class
Mason 2nd class
Beldar
Scaffolding, hire charges of drill machine etc.
Sundries

Details of Cost for : 10.00 Nos

Unit
Quantity
each
10.00

Day
Day
Day
L.S.
L.S.

0.10
1.00
1.10
20.80
20.80

Add water charges @ 1% on

Rate
84.00

273.00
273.00
247.00
1.49
1.49
Total:
1473.98

Add C.P & OH @15% on

1488.72
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 171.20
Rs 171.20

Item Code: 8.1.1.1

Marble work for wall lining (veneer work) in CM 1:3 Raj Nagar marble upto 0.50 Sqm
Details of Cost for : 0.50 Sqm
Code
Description
Unit
Quantity
Finished work = 0.50sqm.+
Add for wastage @ 20% = 0.10 sqm.
Total = 0.60 sqm.

DSR-12

Rate

Page 200 of 2298

7452
2216
03.008
03.015

0126
0100
0114
0115
0101
0128
0102
9999

Raj Nagar plain white marble (polished and machine cut) 18 sqm
mm thick upto 0.50sqm
Carriage of marble
tonne
Cement mortar 1:3 (1 cement : 3 coarse sand)
Rate as per item No. 3.8
White cement mortar 1:2 (1 white cement : 2 marble
LABOUR:
For fixing
Stone Mason (ornamental)
Day
Bandhani
Day
Beldar
Day
Coolie
Day
Bhishti
Day
Mate
Day
Blacksmith 1st class
Day
Scaffolding
L.S.

0.60

610.00

0.03
0.008

77.87
4145.53

0.0012

9509.86

0.335
0.335
0.335
0.335
0.335
0.165
0.135
13.39

301.00
260.00
247.00
247.00
260.00
260.00
301.00
1.49
Total:
956.94

Add water charges @ 1% on

Add C.P & OH @15% on

966.51
Cost for 0.50 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2222.98
Rs 2222.90

Item Code: 8.1.1.2

Marble work for wall lining (veneer work) in CM 1:3 Raj Nagar marble upto 0.50 Sqm
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Finished work = 1.00sqm.+
Add for wastage @ 20% = 0.20 sqm.
Total = 1.20sqm.
7453
Raj Nagar plain white marble (Polished and machine cut) 18 sqm
1.20
mm thick above 0.50 sqm
2216
Carriage of marble
tonne
0.06
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
Cum
0.0144
(Rate as per item No. 3.8)
03.015
White cement mortar 1:2 (1 white cement : 2 marble
Cum
0.0025
LABOUR:
For fixing
0126
Stone Mason (ornamental)
Day
0.67
0100
Bandhani
Day
0.67
0114
Beldar
Day
0.67
0115
Coolie
Day
0.67
0101
Bhishti
Day
0.67
0128
Mate
Day
0.33
0102
Blacksmith 1st class
Day
0.27
9999
Scaffolding
L.S.
26.91
Add water charges @ 1% on

Rate

680.00
77.87
4145.53
9509.86

301.00
260.00
247.00
247.00
260.00
260.00
301.00
1.49
Total:
1992.36

Add C.P & OH @15% on

2012.28
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2314.12
Rs 2314.10

Item Code: 8.2.1.1

DSR-12

Page 201 of 2298

P/F 18mm thick for kitchen platforms etc over 20mm CM 1:4 Raj Nagar marble upto 0.50 Sqm
Details of Cost for : 0.50 Sqm
Code
Description
Unit
Quantity
Mirror polished Abu plain white = 0.50 sqm.+Wastage 5%
0.025 sqm. = 0.525 sqm
7452
Raj nagar plain white marble (polished and machine cut) 18 sqm
0.525
rnm. thick upto 0.50 sqm
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.012
LABOUR:
0123
Mason (brick layer) 1st class
Day
0.70
0114
Beldar
Day
0.325
0115
Coolie
Day
0.325
9999
Moulding and edge polishing
L.S.
39.00
9999
Sundries apoxy resin & cutting machine etc.
L.S.
16.25
Add water charges @ 1% on

Rate

610.00
3485.41
301.00
247.00
247.00
1.49
1.49
Total:
815.65

Add C.P & OH @15% on

823.81
Cost for 0.50 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1894.76
Rs 1894.75

Item Code: 8.2.1.2

P/F 18mm thick for kitchen platforms etc over 20mm CM 1:4 Raj Nagar marble over 0.50 Sqm
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Mirror polished Abu plain white = 1.00 sqm.+Wastage 5% 0.10
sqm.=1.05 sqm
7453
Raj nagar plain white marble (polished machine cut )18 mm sqm
1.05
thick above 0.50 sqm
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.024
LABOUR:
0123
Mason (brick layer) 1 class
Day
1.40
0114
Beldar
Day
0.65
0115
Coolie
Day
0.65
9999
Moulding and edge polishing
L.S.
78.00
9999
Sundries apoxy resin & cutting machine etc.
L.S.
32.50
Add water charges @ 1% on

Rate

680.00
3485.41
301.00
247.00
247.00
1.49
1.49
Total:
1704.80

Add C.P & OH @15% on

1721.85
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1980.13
Rs 1980.80

Item Code: 8.2.2.1

P/F 18mm thick for kitchen platforms etc over 20mm CM 1:4 Granite
Code

Description

Details of Cost for : 0.50 Sqm

Unit
Quantity

Rate

MATERIALS :
Mirror polished granite= 0.50 sqm.+Wastage
5% 0.025 sqm.= 0.525 sqm
7295

DSR-12

Granite Black marble, 18 mm thick slab, above 0.2 sqm up to sqm

0.5 sqm (area wise)

0.525

1550.00

Page 202 of 2298

03.009
0123
0114
0115
9999

Cement mortar 1:4 (1 cement : 4 coarse sand).

LABOUR :
Mason (brick layer) 1st class
Beldar
Coolie
Moulding and edge polishing

9999

Sundries apoxy resin & cutting machine etc.

Cum

0.012

3485.41

Day
Day
Day

0.70
0.325
0.325

301.00
247.00
247.00

L.S.

39.00

1.49

L.S.

16.25

1.49
Total:
1309.15

Add water charges @ 1% on

Add C.P & OH @15% on

1322.24
Cost for 0.50 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 3041.16
Rs 3041.15

Item Code: 8.2.2.2

P/F 18mm thick for kitchen platforms etc over 20mm CM 1:4 Granite
Code

Description

Details of Cost for : 2.00 Sqm

Unit
Quantity

Rate

MATERIALS:
Mirror polished granite= 2.00 sqm.+Wastage
5%0.10sqm.= 2.10sqm
7297

Granite 18 mm thick slab, above 0.50 sqm

03.009
0123
0114
0115
9999

Cement mortar 1:4 (1 cement : 4 coarse sand).

LABOUR:
Mason (brick layer) 1st class
Beldar
Coolie
Moulding and edge polishing

9999

Sundries apoxy resin & cutting machine etc.

sqm
Cum

2.10
0.048

1640.00
3485.41

Day
Day
Day

2.80
1.30
1.30

301.00
247.00
247.00

L.S.

78.00

1.49

L.S.

65.00

1.49
Total:
5309.37

Add water charges @ 1% on

Add C.P & OH @15% on

5362.46
Cost for 2.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 3083.42
Rs 3083.40

Item Code: 8.3.1

Extra for providing edge moulding to 18mm thick marble stone counters, vanities etc Marble work
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
LABOUR:
0019
Hand Grinder for-mirror-polish
Day
1.50
0114
Beldar
Day
2.00
9999
Sundries Blades & Polished etc.
L.S.
78.00

DSR-12

Rate

Add water charges @ 1% on

200.00
247.00
1.49
Total:
910.22

Add C.P & OH @15% on

919.32

Page 203 of 2298

Cost for 10.00 m

Rate per One Metre:
Rate as per DSR-12:

Rs 105.72
Rs 105.70

Item Code: 8.3.2

Extra for providing edge moulding to 18mm thick _x000D_
Code
0019
0114
9999

Description
Hand Grinder For mirror polish
Beldar
Sundries BLADES & Polish etc.,

Details of Cost for : 10.00 m

Unit
Quantity
Day
2.50
Day
3.50
L.S.

117.00

Add water charges @ 1% on

Rate
200.00
247.00
1.49
Total:
1538.83

Add C.P & OH @15% on

1554.22
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 178.74
Rs 178.75

Item Code: 8.4

Extra for fixing marble/ granite stone in facia and drops of width upto 150mm with expoxy resin based
Details of Cost for : 1.50 m
Code
Description
Unit
Quantity
Details of cost for facia 1.5m long and 0.15m wide

0123
0115
9999
03.009

LABOUR:
Mason 1st class
Beldar
Scaffolding, expoxy etc.
Cement mortar 1:4 (1 cement : 4 coarse sand).

Day
Day
L.S.
Cum

0.30
0.30
39.00
0.005

Add water charges @ 1% on

Rate

301.00
247.00
1.49
3485.41
Total:
239.94

Add C.P & OH @15% on

242.34
Cost for 1.50 m
Rate per One Metre:
Rate as per DSR-12:

Rs 185.79
Rs 185.80

Item Code: 8.5

Extra for providing opening of required size and shape for wash basins/kitchen sink
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
0126
Mason (for ornamental stone work) 1st class
Day
0.40
0114
Beldar
Day
0.40
9999
Sundries
L.S.
15.30
Add water charges @ 1% on

Rate
301.00
247.00
1.49
Total:
242.00

Add C.P & OH @15% on

244.42
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 281.08
Rs 281.10

Page 204 of 2298

Item Code: 8.6

Mirror polishing on marble work/granite/stone work where ever required to give high gloss finish complete.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Details of cost for 10 sqm.
LABOUR:
0013
Floor grinder machine (Granite)
Day
1.00
0114
Beldar
Day
2.50
0101
Bhishti
Day
1.50
9999
Sundries grease, mop grinding stones etc.
L.S.
65.00
Add water charges @ 1% on

Rate

300.00
247.00
260.00
1.49
Total:
1404.35

Add C.P & OH @15% on

1418.39
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 163.12
Rs 163.10

Item Code: 8.7.1

P/F cramps of required size and shape in RCC/CC backing with CM 1 : 2 CS i/c drilling necessary hole in stones and embedding the
cramp in the hole (fastener to be paid separately) :- Gunmetal cramps.

Code

7338
9999
03.007
9999

Description
Details of cost for one cramp
MATERIALS:
Gun Metal cramp
10x0.064x0.025x0.006 = 9.6x10^-5
10x0.025x0.025x0.006= 3.7x10^-5
=13.3x10^-5
Less Hole
10x0.024x0.010x0.006 = 1.4x10^-5
=11.90x10^-5
11.9x10^-5x8640 = 1.03 kg
Add wastage @ 5% =0.051 kg
=1.08 kg
Gun metal cramp
Carriage
Cement mortar 1:2 (1 cement : 2 coarse)
(Rate as per item No. 3.7)
Labour for fixing in position

Details of Cost for : 1.03 Kg

Unit
Quantity

Rate

kilog
L.S.

1.08
3.90
0.001

305.00
1.49
4863.86

L.S.

65.00

1.49
Total:
436.92

Add water charges @ 1% on

Add C.P & OH @15% on

441.29
Cost for 1.03 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 492.70
Rs 492.70

Item Code: 8.7.2

P/F cramps of required size and shape in RCC/CC backing with CM 1 : 2 CS i/c drilling necessary hole in stones and embedding the
cramp in the hole (fastener to be paid separately) :- Stainless steel cramps.
Details of Cost for : 0.934 Kg

DSR-12

Page 205 of 2298

Code

7339
9999
03.007
9999

Description
Details of cost for one cramp
MATERIALS:
Stainless steel cramp
10x0.064x0.025x0.006 = 9.6x10^-5
10x0.025x0.025x0.006= 3.7x10^-5
=13.3x10^-5
Less Hole
10x0.024x0.010x0.006 = 1.4x10^-5
=11.90x10^-5
11.9x10^-5x7850 = 0.934 kg
Add wastage @ 5% =0.047 kg
=0.981 kg
Stainless steel cramp
Carriage
Cement mortar 1:2 (1 cement : 2 coarse)
(Rate as per item No. 3.7)
Labour for fixing in position

Unit

Quantity

Rate

kilog
L.S.

0.981
3.90
0.001

320.00
1.49
4863.86

L.S.

65.00

1.49
Total:
421.44

Add water charges @ 1% on

Add C.P & OH @15% on

425.65
Cost for 0.934 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 524.09
Rs 524.10

Item Code: 8.8.1.1

P/F expansion hold fasteners on CC/R.C.C. surface backing i/c drilling necessary holes and the cost of bolt etc. complete :- Wedge
expansion type : Fastner with threaded dia. 6 mm.

Code

7430
1034
0116
0114
9999

Description
Details of cost for 30nos. W.E.H. fastener
Materials:
Wedge expansion hold fastener size 6mm,
36.5mm length
Bolt 6mm dia. Length (36.5+10mm)
Labour:
Fitter Grade-I
Beldar
Hire and running charges for hand drill

Details of Cost for : 30.00 Nos

Unit
Quantity

Rate

each

30.00

12.00

quint

0.0045

5400.00

Day
Day
L.S.

0.25
0.25
32.50

301.00
247.00
1.49
Total:
569.73

Add water charges @ 1% on

Add C.P & OH @15% on

575.43
Cost for 30.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 22.06
Rs 22.05

Item Code: 8.8.1.2

P/F expansion hold fasteners on CC/R.C.C. surface backing i/c drilling necessary holes and the cost of bolt etc. complete :- Wedge
expansion type : Fastner with threaded dia. 10 mm.

Code

DSR-12

Description
Details of cost for 30nos. W.E.H. fastener

Details of Cost for : 30.00 Nos

Unit
Quantity

Rate

Page 206 of 2298

7431
1034
0116
0114
9999

MATERIALS:
Wedge expansion hold fastener size 10mm,
44.5mm length
Bolt 10mm dia. Length (44.5+10mm)
LABOUR:
Fitter Grade-I
Beldar
Hire and running charges for hand drill

each

30.00

14.00

quint

0.006

5400.00

Day
Day
L.S.

0.25
0.25
32.50

301.00
247.00
1.49
Total:
637.83

Add water charges @ 1% on

Add C.P & OH @15% on

644.21
Cost for 30.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 24.69
Rs 24.70

Item Code: 8.8.1.3

P/F expansion hold fasteners on CC/R.C.C. surface backing i/c drilling necessary holes and the cost of bolt etc. complete :- Wedge
expansion type : Fastner with threaded dia. 12 mm.

Code

7432
1034
0116
0114
9999

Description
Details of cost for 30nos. W.E.H. fastener
MATERIALS:
Wedge expansion hold fastener size 12mm, 58.7mm length
Bolt 12mm dia. Length (58.7+10mm) @ 0.05 kg./each
LABOUR:
Fitter Grade-I
Beldar
Hire and running charges for hand drill

Details of Cost for : 30.00 Nos

Unit
Quantity

Rate

each

30.00

26.00

quint

0.0075

5400.00

Day
Day
L.S.

0.25
0.25
32.50

301.00
247.00
1.49
Total:
1005.93

Add water charges @ 1% on

Add C.P & OH @15% on

1015.99
Cost for 30.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 38.95
Rs 38.95

Item Code: 8.9.1.1

Stone tile (polished) work for wall lining over 12 mm thick bed of CM 1: 3 CS :- 8 mm thick: Raj Nagar plain/ Udaipur green marble/
Zebra black marble.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 1 sqm.
8mm thick marble tiles.
Qty. = 1.00 sqm. + Add wastage @2.5% = 0.025 sqm
Total = 1.025 sqm.
2751
8 mm thick marble tiles (polished)
sqm
1.025
340.00
9999
Carriage of tiles
L.S.
3.95
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.014
4145.53
(Rate as per item no. 3.8)
9999
Mortar for pointing
L.S.
25.38
1.49
0367
Cement for slurry
tonne
0.0033
5000.00
0123
Mason 1 st class
Day
1.00
301.00
0114
Beldar
Day
1.00
247.00

DSR-12

Page 207 of 2298

9999

Sundries etc.

L.S.

16.90

Add water charges @ 1% on

1.49
Total:
1039.93

Add C.P & OH @15% on

1050.33
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1207.88
Rs 1207.90

Item Code: 8.9.1.2

Stone tile (polished) work for wall lining over 12 mm thick bed of CM 1: 3 CS :- 8 mm thick: Granite of any colour and shade.

Code

2750
9999
03.008
9999
0367
0123
0114
9999

Description

Details of Cost for : 1.00 Sqm

Unit
Quantity

Details of cost for 1 sqm.

8mm thick Granite tiles.
Qty. = 1.00 sqm. + Add wastage [email protected]% = 0.025sqm
Total = 1.025 sqm.
8 mm thick granite stone tiles (mirror polished and of all sqm
shades)
Carriage of tiles
L.S.
Cement mortar 1:3 (1 cement : 3 coarse sand)
(Rate as per item No. 3.8)
Mortarr for pointing
L.S.
Cement for slurry
tonne
Mason 1st class
Day
Beldar
Day
Sundries etc.
L.S.

Rate

1.025

675.00

3.95
0.014

1.49
4145.53

25.38
0.0033
1.00
1.00
16.90

1.49
5000.00
301.00
247.00
1.49
Total:
1383.31

Add water charges @ 1% on

Add C.P & OH @15% on

1397.14
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1606.71
Rs 1606.70

Item Code: 8.10.1

P/F stone slab table rubbed, edges rounded and polishe 75 x 50cm and 1.8cm thick in urinal partitions: White Agaria Marble stone.

Code

Description

Details of Cost for : 0.375 Sqm

Unit
Quantity

Rate

MATERIALS:
Agaria Marble Stone 1 x 0.75 x0.50 = 0.375 +
Add wastage @ 20% = 0.075 sqm.
Total = 0.45sqm.
7244

9999

Table rubbed polished stone 18 mm thick (75x50cm) Agaria sqm

Marble stone - 18 mm thick
Cement concrete 1:2:4 for filling
L.S.
Labour for fixing, edge rounding and final POLISHING

9999

Sundries

9999

L.S.
L.S.

0.45

1630.00

21.58

1.49

43.16
21.58

1.49
1.49
Total:
862.11

Add water charges @ 1% on

DSR-12

Page 208 of 2298

Add C.P & OH @15% on

870.73
Cost for 0.375 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2670.24
Rs 2670.75

Item Code: 8.10.2

P/F stone slab table rubbed, edges rounded and polishe 75 x 50cm and 1.8cm thick in urinal partitions: Granite Stone of approved
shade.
Details of Cost for : 0.375 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for one No or 0.375 sqm.
MATERIALS :Granite Stone 1x0.75x0.50 = 0.375sqm.+
Add wastage @ 20% = 0.075 sqm
Total = 0.45 sqm.
7245
Granite Stone
sqm
0.45
1825.00
9999
Cement concrete 1:2:4 for fixing
L.S.
21.58
1.49
9999
Labour for fixing, edge rounding and final polishing.
L.S.
43.16
1.49
9999
Sundries
L.S.
21.58
1.49
Total:
Add water charges @ 1% on
949.86
Add C.P & OH @15% on
959.36
Cost for 0.375 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2942.03
Rs 2942.05

Item Code: 9.1.1

Providing wood work in frames of doors, windows, etc fixed in position : Second class teak wood
Details of Cost for : 0.036 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
1189
Second class teak wood (Scantling)
cum
0.038
64000.00
Qty including 5% wasatage
2204
Carraige of Timber
cum
0.038
100.11
LABOUR:
0156
Carpenter (average)
Day
0.72
287.00
0114
Beldar
Day
0.07
247.00
Total:
Add water charges @ 1% on
2659.73
Add C.P & OH @15% on
2686.33
Cost for 0.036 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 85813.33
Rs 85813.30

Item Code: 9.1.2

Providing wood work in frames of doors, windows, etc fixed in position : Sal wood
Details of Cost for : 0.036 Cum
Code
Description
Unit
Quantity
Rate
MATERIALS:
1199
Sal wood
cum
0.038
50000.00
2204
Carraige of Timber
cum
0.038
100.11

DSR-12

Page 209 of 2298

0156
0114

LABOUR:
Carpenter (average)
Beldar

Day
Day

0.72
0.07

Add water charges @ 1% on

287.00
247.00
Total:
2127.73

Add C.P & OH @15% on

2149.01
Cost for 0.036 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 68648.89
Rs 68648.90

Item Code: 9.1.3

W/W in frames of doors, windows and other frames Kiln seasoned and chemically treated hollock wood.
Details of Cost for : 0.036 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for Chowkhat of a door 206.75x117.5cm
MATERIALS
Hollock wood
2x206.75x9.5x7.0cm =0.028cum+
1x117.50x9.5x7.0cm = 0.008cum.
= 0.036cum.+
Add for wastage @ 5% = 0.002cum.
Grand Total = 0.038cum.
2466
Hollock wood
cum
0.038
31000.00
2204
Carriage of timber
cum
0.038
100.11
2504
Kiln seasoning of timber
cum
0.038
680.00
9999
Chemical treatment
L.S.
8.97
1.49
LABOUR:
0156
Carpenter (average)
Day
0.72
287.00
0114
Beldar
Day
0.07
247.00
Total:
Add water charges @ 1% on
1444.94
Add C.P & OH @15% on
1459.39
Cost for 0.036 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 46619.44
Rs 46619.45

Item Code: 9.2

Providing laminated veneer lumber factory made doors, windows frames etc
Details of Cost for : 0.036 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for Chowkhat of a door
206.75x117.5cm
MATERIALS:
Hollock wood
2x206.75x9.5x7.0cm =0.028cum+
1x117.50x9.5x7.0cm = 0.008cum.
= 0.036cum.+
Add for wastage @ 5% = 0.002cum.
Grand Total = 0.038cum.
7157
Laminated veneer lumber
cum
0.038
66500.00
2204
Carraige of Timber
cum
0.038
100.11
LABOUR
0111
Carpenter 1st class
Day
0.20
301.00
0112
Carpenter 2nd class
Day
0.20
273.00

DSR-12

Page 210 of 2298

0114

Beldar

Day

0.20

Add water charges @ 1% on

247.00
Total:
2695.00

Add C.P & OH @15% on

2721.95
Cost for 0.036 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 86951.11
Rs 86951.10

Item Code: 9.3.1

W/W in frames of false ceiling, partitions etc Sal wood .
Code

1199
2204
0112
0114
9999

Description
Details of cost for ceiling for a room 3x3m
MATERIALS:
Salwood
= 6x3.30x(50/1000)x(125/1000)= 0.1238 cum. +
Cross battens 60mm centre to center 38x50mm.
6x3x(38/1000)x(50/1000)=0.0342cum.
= 0.1580 cum.+
Add for wastage @ 5% = 0.0079 cum.
= 0.1659 cum. say 166 cudm.
Salwood
Carriage of timber
LABOUR:
Carpenter Ilnd Class
Beldar
Sundries screws etc.

Details of Cost for : 0.158 Cum

Unit
Quantity

Rate

cum
cum

0.166
0.166

50000.00
100.11

Day
Day
L.S.

1.00
1.00
53.82

273.00
247.00
1.49
Total:
8916.81

Add water charges @ 1% on

Add C.P & OH @15% on

9005.98
Cost for 0.158 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 65549.87
Rs 65549.90

Item Code: 9.3.2

W/W in frames of false ceiling, partitions etc Kiln seasoned and chemically treated hollock wood.
Details of Cost for : 0.158 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for ceiling for a room 3x3m
MATERIALS:
Hollock wood
= 6x3.30x(50/1000)x(125/1000)= 0.1238 cum. +
Cross battens 60mm centre to center 38x50mm.
6x3x(38/1000)x(50/1000)=0.0342cum.
= 0.1580 cum.+
Add for wastage @ 5% = 0.0079 cum.
= 0.1659 cum. say 166 cudm.
2466
Hollock wood
cum
0.166
31000.00
2204
Carriage of timber
cum
0.166
100.11
2504
Kiln seasoning of timber
cum
0.166
680.00
9999
Chemical treatment
L.S.
18.20
1.49
LABOUR:
0112
Carpenter Ilnd Class
Day
1.00
273.00
0114
Beldar
Day
1.00
247.00

DSR-12

Page 211 of 2298

9999

Sundries screws etc.

L.S.

53.82

Add water charges @ 1% on

1.49
Total:
5902.81

Add C.P & OH @15% on

5961.84
Cost for 0.158 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 43393.16
Rs 43393.20

Item Code: 9.4.1

Extra for additional labour for circular works 2nd class teak wood
Code

1189
2204
0156
0114

Description
Details of cost for Chowkhat of a door
206.75x117.5cm
Extra Materials and labour for wastage @
10% on quantity of item no 9.1.1
MATERIALS :
Second class teakwood
Carriage of material (timber)
LABOUR:
Carpenter (avg.)
Beldar

Details of Cost for : 0.036 Cum

Unit
Quantity

Rate

cum
cum

0.0038
0.0038

64000.00
100.11

Day
Day

0.072
0.007

287.00
247.00
Total:
265.97

Add water charges @ 1% on

Add C.P & OH @15% on

268.63
Cost for 0.036 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 8581.11
Rs 8581.10

Item Code: 9.4.2

Extra for additional labour for circular works Sal wood.
Code

1199
2204
0156
0114

Description
Details of cost for Chowkhat of a door
206.75x117.5cm
Extra Materials and labour for wastage @
10% on quantity of item no 9.1.2
MATERIALS :
Sal wood in scantling
Carriage of material (timber)
LABOUR:
Carpenter (avg.)
Beldar

Details of Cost for : 0.036 Cum

Unit
Quantity

Rate

cum
cum

0.0038
0.0038

50000.00
100.11

Day
Day

0.072
0.007

287.00
247.00
Total:
212.77

Add water charges @ 1% on

Add C.P & OH @15% on

214.90
Cost for 0.036 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 6865.00
Rs 6865.00

Item Code: 9.4.3

DSR-12

Page 212 of 2298

Extra for additional labour for circular works Kiln seasoned and chemically treated hollock wood.
Details of Cost for : 0.036 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for Chowkhat of a door
206.75x117.5cm
Extra Materials and labour for wastage @
10% on quantity of item no 9.1.3
MATERIALS :
2466
Hollock wood
cum
0.0038
31000.00
2204
Carriage of timber
cum
0.0038
100.11
2504
Kiln seasoning of timber
cum
0.0038
680.00
9999
Chemical treatment
L.S.
0.90
1.49
LABOUR:
0156
Carpentr I class
Day
0.072
287.00
0114
Beldar
Day
0.007
247.00
Total:
Add water charges @ 1% on
144.49
Add C.P & OH @15% on
145.93
Cost for 0.036 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4661.67
Rs 4661.45

Item Code: 9.5.1.1

P/F panelled / panelled and glazed shutters for doors, windows etc excluding, panelling .. ..Second class teak wood ....35 mm thick
shutters _x000D_
Details of Cost for : 2.16 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for shutters of a Door
(l/3rd glazed and 2/3rd panelled) 200xl08cm
= 2.16sqm)
MATERIALS:
Teak wood
Styles 4x200x10.0x3.5cm = 0.028cum+
Rails
Top rails1x110.5x3.5cm = 0.004cum.+
Bottom rails 1x110.5x20x3.5cm = 0.008cum+
Lock rails 1x110.5x15x3.5cm = 0.006cum+
Beading 2x186. 1x1. 9x1.2cm = 0.001cum.
Total = 0.047 cum+
Add for wastage @ 10% = 0.005cum
Grand Total = 0.051 cum.
1190
Teak wood
cum
0.051
72000.00
2204
Carriage of timber
cum
0.051
100.11
0595
Black enemelled M.S. Butt
10 No
6.00
80.00
hinges-100x5 8x1.9mm
0597
Black enemelled M.S. Butt
10 No
2.00
45.00
hinges-50x37xl.5mm
0637
M.S. Screws 40mm
100 N
48.00
50.00
0640
M.S. Screws 20mm
100 N
8.00
25.00
LABOUR:
0156
Carpenter (average)
Day
1.83
287.00
0114
Beldar
Day
0.76
247.00
9999
Sundries
L.S.
35.88
1.49
Total:
Add water charges @ 1% on
4526.50
Add C.P & OH @15% on

DSR-12

4571.77

Page 213 of 2298

Cost for 2.16 Sqm

Rate per One Sqm:
Rate as per DSR-12:

Rs 2434.05
Rs 2434.05

Item Code: 9.5.1.2

P/F panelled / panelled and glazed shutters for doors, windows etc excluding, panelling .. ..Second class teak wood ....30 mm thick
shutters
Details of Cost for : 2.16 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for shutters of a Door (l/3rd glazed and 2/3rd
panelled) 200x108cm = 2.16 sqm
MATERIALS:
Teak wood
Styles : 4x200x10.0x3.0cm = 0.024 cum+
Top rails :1x110.5x9.5x3.0cm = 0.003cum+
Bottom rails: 1x110.5x19.7x3.0cm =
0.007cum+
Lockrails: 1x110.5xl5.0x3.0cm =
0.005cum+
Beading : 2x186.lxl.9x1.2cm = 0.001 cum.
Total = 0.040 cum. +
Add for wastage @ 10% = 0.004 cum.
Grand Total = 0.044 cum.
1190
Teak wood
cum
0.044
72000.00
2204
Carriage of timber
cum
0.044
100.11
0595
Bright finished or black enamelled mild steel butt hinges 10 No
6.00
80.00
100x58x1.90 mm
0597
Bright finished or black enamelled mild steel 10 No
2.00
45.00
butthinges5Ox37x1.50 mm
0637
M.S. Screws 40mm
100 N
48.00
50.00
0640
M.S. Screws 20mm
100 N
8.00
25.00
LABOUR:
0156
Carpenter (avg)
Day
1.83
287.00
0114
Beldar
Day
0.76
247.00
9999
Sundries
L.S.
35.88
1.49
Total:
Add water charges @ 1% on
4021.79
Add C.P & OH @15% on
4062.01
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2162.64
Rs 2162.65

Item Code: 9.5.2.1

P/F Panelled or/and glazed shutters for doors etc Kiln seasoned and chemically treated hollock wood 35 mm thick

Code

DSR-12

Details of Cost for : 2.16 Sqm

Description
Unit
Quantity
Details of cost for shutters of a Door (l/3rd glazed and 2/3rd
panelled) 200x108cm = 2.16 sqm
MATERIALS:
Hollock wood
Styles 4x200x10.0x3.5cm = 0.028cum+
Rails
Top rails 1x110.5x10.0x3.5cm = 0.004cum.+
Bottom rails 1x110.5x20.0x3.5cm = 0.008cum+

Rate

Page 214 of 2298

2505
2204
2504
9999
0595
0597
0637
0640
0156
0114
9999

Lock rails 1x110.5x15.00x3.5cm = 0.006cum+

Beading2xl86.1xl.9xl.2cm = 0.001cum.
Total = 0.047 cum+
Add for wastage @ 10% = 0.005cum
Grand Total = 0.051 cum.
Hollock wood
Carriage of timber
Kiln seasoning
Chemical treatment
Black enamelled M.S. Butt hinges-100x58xl.9mm
Black enamelled M.S. Butt hinges-50x37xl .5mm
M.S. Screws 40mm
M.S. Screws 20mm
LABOUR:
Carpenter (Avg.)
Beldar
Sundries

cum
cum
cum
L.S.
10 No
10 No
100 N
100 N

0.051
0.051
0.051
9.10
6.00
2.00
48.00
8.00

35000.00
100.11
680.00
1.49
80.00
45.00
50.00
25.00

Day
Day
L.S.

1.83
0.76
35.88

287.00
247.00
1.49
Total:
2687.74

Add water charges @ 1% on

Add C.P & OH @15% on

2714.62
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1445.28
Rs 1445.30

Item Code: 9.5.2.2

P/F Panelled or/and glazed shutters for doors etc Kiln seasoned and chemically treated hollock wood 30 mm thick

Code

2505
2204
2504
9999
0595
0597
0637
0640
0156
0114
9999

Details of Cost for : 2.16 Sqm

Description
Unit
Quantity
Details of cost for shutters of a door (l/3rd glazed and 2/3rd
panelled)
200xl08cm = 2.16sqm.
MATERIALS:
Hollock wood
Styles 4x200xl0.0x3.0cm = 0.024cum+
Rails
Top rails 1x110.5x9.50x3.0cm = 0.003cum.+
Lock rails 1x110.5x15.0x3.0cm = 0.005cum+
Bottom rails 1x110.5xl9.7x3.0cm = 0.007cum+
Beading2xl86.1xl.9xl.2cm = 0.001cum
Total = 0.040 cum.+
Add for wastage @ 10% = 0.004cum
Grand Total = 0.044 cum or = 44 cudm
Hollock wood
cum
0.044
Carriage of timber
cum
0.044
Kiln seasoning
cum
0.044
Chemical treatment
L.S.
9.10
Black enemelled M.S. Butt hinges-100x58xl.9mm
10 No
6.00
Black enemelled M.S. Butt hinges-50x37xl .5mm
10 No
2.00
M.S. Screws 40mm
100 N
48.00
M.S. Screws 20mm
100 N
8.00
LABOUR:
Carpenter (Avg.)
Day
1.83
Beldar
Day
0.76
Sundries
L.S.
35.88
Add water charges @ 1% on

DSR-12

Rate

35000.00
100.11
680.00
1.49
80.00
45.00
50.00
25.00
287.00
247.00
1.49
Total:
2437.27

Page 215 of 2298

Add C.P & OH @15% on

2461.64
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1310.60
Rs 1310.60

Item Code: 9.5.3.1

P/F panelled or panelled and glazed shutters for doors, windows etc ISI marked M.S. pressed butt hinges excluding, panelling - Kiln
seasoned selected planks of sheesham wood - 35mm thick

Code

Details of Cost for : 2.16 Sqm

Unit
Quantity

Description

Rate

0637

Sheesham wood:
Styles 4x2.00x0.10x0.035 m = 0.028 cum +
Rails
Top rails: 1 x 1.105 x 0.10x0.035 m = 0.004 cum +
Lock rails: 1 x 1.105 x 0.15x0.035 m = 0.006 cum +
Bottom rail = 1x1.105x0.20x0.035m= 0.008 cum+
Beading 2x0.861x0.019x0.012 m = 0.001 cum
Total = 0.047 cum
Add wastage @ 10% = 0.005 cum
Grand Total = 0.051 cum or 51 cudm
Kiln seasoned selected sheesum wood planks
Carraige of Timber
Kiln seasoning of timber
Bright finished or black enameled mild steel butt hinges
100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges
50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0156
0114

Carpenter (average)
Beldar
LABOUR:
Carriage

Day
Day

1.83
0.76

287.00
247.00

L.S.

35.88

1.49
Total:
4204.18

1200
2204
2504
0595
0597

9999

Cum
cum
cum
10 No

0.051
0.051
0.051
6.00

65000.00
100.11
680.00
80.00

10 No

2.00

45.00

100 N

48.00

50.00

Add water charges @ 1% on

Add C.P & OH @15% on

4246.22
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2260.72
Rs 2260.70

Item Code: 9.5.3.2

P/F panelled or panelled and glazed shutters for doors, windows etc ISI marked M.S. pressed butt hinges excluding, panelling - Kiln
seasoned selected planks of sheesham wood - 30mm thick

Code

Description

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

Sheesham wood:
Styles 4x2.00x0.10x0.030 m = 0.024 cum +
Rails
Top rails: 1 x 1.105 x 0.095x0.030 m = 0.003 cum +
Lock rails: 1 x 1.105 x 0.15x0.030 m = 0.005 cum +

DSR-12

Page 216 of 2298

0637

Bottom rail : 1 x 1.105 x 0.197x0.030 m = 0.006 cum

Beading 2x0.861x0.019x0.012 m = 0.001 cum
Total = 0.04 cum
Add for wastage @ 10% = 0.004 cum
Grand Total : 0.044 cum or 44 cudm
Kiln seasoned selected sheesum wood planks
Carraige of Timber
Kiln seasoning of timber
Bright finished or black enameled mild steel butt
hinges75x47x1.70 mm
Bright finished or black enameled mild steel screws 40 mm

0156
0114
9999

LABOUR:
Carpenter (average)
Beldar
Carriage

1200
2204
2504
0596

Cum
cum
cum
10 No

0.044
0.044
0.044
6.00

65000.00
100.11
680.00
60.00

100 N

48.00

50.00

Day
Day
L.S.

1.83
0.76
35.88

287.00
247.00
1.49
Total:
3720.71

Add water charges @ 1% on

Add C.P & OH @15% on

3757.92
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2000.75
Rs 2000.75

Item Code: 9.6.1

P/F 35mm thick factory made laminated veneer lumber door shutter 12mm thick plain Grade-1, medium density flat pressed 3 layer
or graded particle board (FPT-1)
Details of Cost for : 2.38 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost of one shutter
220xl08cm = 2.38sqm.
MATERIALS:
Factory made shutters LVL syles, rails and panels
7137
Plain particle board
sqm
2.38
1780.00
9999
Carriage of shutters
L.S.
29.64
1.49
Fittings:
0595
Black enamelled M.S. Butt hinges-100x58x 1.9mm
10 No
6.00
80.00
0597
Black enamelled M.S. Butt hinges-50x37xl.5
10 No
2.00
45.00
0637
M.S. Screws 40mm
100 N
48.00
50.00
0640
M.S. Screws 20mm
100 N
8.00
25.00
LABOUR:
0156
Carpenter Average
Day
0.52
287.00
0114
Beldar
Day
0.60
247.00
9999
Sundries
L.S.
35.88
1.49
Total:
Add water charges @ 1% on
4714.46
Add C.P & OH @15% on
4761.60
Cost for 2.38 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2300.77
Rs 2300.75

Item Code: 9.6.2

P/F 35mm thick factory made laminated veneer lumber door shutter 12mm thick pre-laminated decorative lamination on both
sides) particle board Grade-1 medium density flat pressed, 3 layer and graded (FPT-1)

DSR-12

Page 217 of 2298

Code

7139
9999
0595
0597
0637
0640
0156
0114
9999

Details of Cost for : 2.38 Sqm

Description
Unit
Quantity
Details of cost of one shutter
220xl08cm = 2.38sqm.
Materials:
Factory made shutters LVL styles, rails and
panels
Factory made 35 mm thick shutters with laminated veneer sqm
2.38
lumber styles rails as per TADS IS
Carriage of shutters
L.S.
29.64
Fittings:
Black enamelled M.S. Butt
10 No
6.00
hinges-100x58x 1.9mm
Black enamelled M.S. Butt hinges-50x37xl.5
10 No
2.00
M.S. Screws 40mm
100 N
48.00
M.S. Screws 20mm
100 N
8.00
Labour:
Carpenter Average
Day
0.52
Beldar
Day
0.60
Sundries
L.S.
35.88
Add water charges @ 1% on

Rate

1930.00
1.49
80.00
45.00
50.00
25.00
287.00
247.00
1.49
Total:
5071.46

Add C.P & OH @15% on

5122.17
Cost for 2.38 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2475.00
Rs 2475.00

Item Code: 9.6.3

P/F 35mm thick factory made laminated veneer lumber door shutter 12mm thick pre-laminated (decorative lamination on one side
& other side balancing) Grade-1, medium density flat pressed, 3 layer & graded (FPT-1)

Code

7143
9999
0595
0597
0637
0640
0156
0114
9999

Details of Cost for : 2.38 Sqm

Description
Unit
Quantity
Details of cost of one shutter 220xl08cm = 2.38sqm.
MATERIALS:
Factory made shutters LVL syles, rails and panels
Factory made 35 mm thick shutters with laminated veneer sqm
2.38
lumber styles rails as per TADS IS
Carriage of shutters
L.S.
29.64
FITTINGS:
Black enamelled M.S. Butt hinges-100x58x 1.9mm
10 No
6.00
Black enamelled M.S. Butt hinges-50x37xl.5
10 No
2.00
M.S. Screws 40mm
100 N
48.00
M.S. Screws 20mm
100 N
8.00
LABOUR:
Carpenter Average
Day
0.52
Beldar
Day
0.60
Sundries
L.S.
35.88
Add water charges @ 1% on

Rate

1850.00
1.49
80.00
45.00
50.00
25.00
287.00
247.00
1.49
Total:
4881.06

Add C.P & OH @15% on

4929.87
Cost for 2.38 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 2382.08
Rs 2382.10

Page 218 of 2298

Item Code: 9.7.1

P/F panelling or panelling and glazing for panelled shutters for doors, windows etc - Second class teak wood.

Code

1190
2204
0111
9999

Details of Cost for : 0.66 Sqm

Description
Unit
Quantity
Details of cost for shutters of a door with 2/3rd
panelling...200x 108cm = 2.16sqm.
Panel area = 4x45.1x36.55cm = 0.66sqm
MATERIALS:
Panels
4x47.2x38.65xl.6cm = 0.0117cum+
Add for wastage @ 10% = 0.0012cum.
= 0.0129 cum.
Second class teak wood
cum
0.0129
Carriage of timber
cum
0.0129
LABOUR:
Carpenter 1st class
Day
0.57
Sundries
L.S.
4.42
Add water charges @ 1% on

Rate

72000.00
100.11
301.00
1.49
Total:
1108.25

Add C.P & OH @15% on

1119.33
Cost for 0.66 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1950.35
Rs 1950.35

Item Code: 9.7.2

P/F panelling or panelling and glazing for panelled shutters for doors, windows etc - Kiln seasoned and chemically treated Hollock
wood .
Details of Cost for : 0.66 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
Hollock wood
panels 4x45.1x36.55cm = 0.0117 cum+
Add for wastage @ 10% = 0.0012cum.
= 0.0129 cum.
2505
Hollock wood
cum
0.0129
35000.00
2204
Carriage of timber
cum
0.0129
100.11
2504
Kiln seasoning
cum
0.0129
680.00
9999
Chemical treatment
L.S.
8.97
1.49
Labour & sundries
0111
Carpenter 1 st class
Day
0.57
301.00
9999
Sundries
L.S.
4.42
1.49
Total:
Add water charges @ 1% on
653.09
Add C.P & OH @15% on
659.62
Cost for 0.66 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1149.33
Rs 1149.35

Item Code: 9.7.3.1

P/F panelling or panelling and glazing for panelled door shutters etc - 9mm ply - Decorative veneer on both sides.
Details of Cost for : 0.66 Sqm

DSR-12

Page 219 of 2298

Code

Description
Plywood (9mm thick) 4x47.2x38.65cm = 0.73sqm
Add wastage @ 10% = 0.07
-------------= 0.80sqm

Unit

Quantity

Rate

2480
9999
0111
9999

Ply wood 5 ply with teak ply on both faces 9 mm thick

Carriage of ply wood
Carpenter I class
Sundries

sqm
L.S.
Day
L.S.

0.80
1.82
0.57
4.42

960.00
1.49
301.00
1.49
Total:
948.87

Add water charges @ 1% on

Add C.P & OH @15% on

958.36
Cost for 0.66 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1669.86
Rs 1669.85

Item Code: 9.7.3.2

P/F panelling or panelling and glazing for panelled door shutters etc - 9mm ply - decorative veneer on one side and commr veneer
on other side.
Details of Cost for : 0.66 Sqm
Code
Description
Unit
Quantity
Rate
Plywood (9mm thick) 4x47.2x38.65cm = 0.73sqm
Add wastage @ 10% = 0.07
-------------= 0.80sqm
2481
9999
0111
9999

Ply wood 5 ply with teak ply on one face and commercial ply
on another face 9 mm thick
Carriage of ply wood
Carpenter I class
Sundries

sqm

0.80

775.00

L.S.
Day
L.S.

1.82
0.57
4.42

1.49
301.00
1.49
Total:
800.87

Add water charges @ 1% on

Add C.P & OH @15% on

808.88
Cost for 0.66 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1409.41
Rs 1409.40

Item Code: 9.7.4.1

P/F panelling or panelling and glazing for panelled door shutters etc - 9mm 7ply - One side decorative veneering.

Code

Description

Details of Cost for : 0.66 Sqm

Unit
Quantity

Rate

MATERIALS:
Plywood (9mm thick)
4x47.2x38.65cm = 0.73sqm
Add wastage @ 10% = 0.07 sqm
Total = 0.80sqm
2483
9999
0111

DSR-12

Ply wood 7 ply with teak ply on one face and commercial ply sqm
on another face 9 mm thick
Carriage of ply wood
L.S.
Carpenter I class
Day

0.80

845.00

1.82
0.57

1.49
301.00

Page 220 of 2298

9999

Sundries

L.S.

4.42

Add water charges @ 1% on

1.49
Total:
856.87

Add C.P & OH @15% on

865.44
Cost for 0.66 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1507.97
Rs 1507.95

Item Code: 9.7.5.1

P/F panelling or panelling and glazing for panelled door shutters etc - 12mm MDF particle board.
Details of Cost for : 0.66 Sqm
Code
Description
Unit
Quantity
Plywood (9mm thick) 4x47.2x38.65cm = 0.73sqm
Add wastage @ 10% = 0.07
-------------= 0.80sqm
0341
9999
0111
9999

Flat pressed 3layer particle board : 12 mm thick

Carriage of ply wood
Carpenter I class
Sundries

sqm
L.S.
Day
L.S.

0.80
1.82
0.57
4.42

Add water charges @ 1% on

Rate

325.00
1.49
301.00
1.49
Total:
440.87

Add C.P & OH @15% on

445.28
Cost for 0.66 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 775.86
Rs 775.85

Item Code: 9.7.5.2

P/F Panelling or panelling and glazing in shutters (25 mm to 40 mm thick) Particle board 12mm thick veneered particle board with
commercial veneering on both face
Details of Cost for : 0.66 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for shutters of a door with
2/3rd panelling.. .200x108cm = 2.16sqm.
Panel area = 4x45.1x36.55cm = 0.66sqm.
MATERIALS:
Particle board 4x47.2x38.65cm = 0.73sqm+
Add for wastage @ 10% = 0.07sqm.
7468
Total = 0.80 sqm.
sqm
0.80
480.00
9999
Carriage of Plywood
L.S.
1.82
1.49
LABOUR:
0111
Carpenter 1st class
Day
0.57
301.00
9999
Sundries
L.S.
4.42
1.49
Total:
Add water charges @ 1% on
564.87
Add C.P & OH @15% on
570.52
Cost for 0.66 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 994.09
Rs 994.10

Page 221 of 2298

Item Code: 9.7.5 .3

P/F panelling or panelling and glazing for panelled door shutters etc - 12mm prelaminated particle board - one side laminated.
Details of Cost for : 0.66 Sqm
Unit
Quantity

Code

Description
Plywood (9mm thick) 4x47.2x38.65cm = 0.73sqm
Add wastage @ 10% = 0.07
-------------= 0.80sqm

7477

12mm thick - Prelaminated particle board with one side sqm

decorative and other side balancing
Carriage of ply wood
L.S.
Carpenter I class
Day
Sundries
L.S.

9999
0111
9999

Rate

0.80

690.00

1.82
0.57
4.42

1.49
301.00
1.49
Total:
732.87

Add water charges @ 1% on

Add C.P & OH @15% on

740.20
Cost for 0.66 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1289.74
Rs 1289.75

Item Code: 9.7.5.4

P/F panelling or panelling and glazing for panelled door shutters etc - 12mm prelaminated particle board - both sides laminated.

Code

7480
9999
0111
9999

Description
12mm prelaminated board both
4x47.2x38.65cm = 0.73sqm
Add wastage @ 10% = 0.07
-------------= 0.80sqm

Details of Cost for : 0.66 Sqm

Unit
Quantity
side

Rate

laminated

12mm thick prelaminated particle board - Grade-I - Both side

laminated
Carriage of particle board
Carpenter I class
Sundries

sqm

0.80

720.00

L.S.
Day
L.S.

1.82
0.57
4.42

1.49
301.00
1.49
Total:
756.87

Add water charges @ 1% on

Add C.P & OH @15% on

764.44
Cost for 0.66 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1331.98
Rs 1332.00

Item Code: 9.7.6.1

P/F panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows etc - for panelled or panelled
and glazed shutters 25 mm to 40 mm thick - Coir Veneer Board - 12mm thick

Code

Description

Details of Cost for : 0.66 Sqm

Unit
Quantity

Rate

MATERIALS:
Coir Veneer Board 12mm thick
4x47.2x38.65 cm =0.73 sqm

DSR-12

Page 222 of 2298

Add wastage @ 10% =0.07 sqm

Total = 0.80sqm
7555
9999
0111
9999

Coir veneered board 12mm thick

Carriage
Carpenter 1st class
Sundries

sqm
L.S.
Day
L.S.

0.80
1.82
0.57
4.42

Add water charges @ 1% on

622.00
1.49
301.00
1.49
Total:
678.47

Add C.P & OH @15% on

685.25
Cost for 0.66 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1194.00
Rs 1194.00

Item Code: 9.7.7.1

P/F panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows etc - for panelled or panelled
and glazed shutters 25 mm to 40 mm thick - Float glass panes - 4mm thick

Code

Details of Cost for : 0.66 Sqm

Unit
Quantity

Description

Rate

MATERIALS:
Qty of glass panes
4x47.2x38.65 cm =0.73 sqm
Add wastage @ 10% =0.07 sqm
Total = 0.80sqm
2406
9999
0156
0119
0114
9999

Float glass sheet of nominal thickness 4 mm (weight not less

than 10kg/sqm).
Carriage
Carpenter (average)
Glazier
Beldar
Sundries

sqm

0.80

310.00

L.S.
Day
Day
Day
L.S.

1.82
0.57
0.15
0.15
25.47

1.49
287.00
273.00
247.00
1.49
Total:
530.25

Add water charges @ 1% on

Add C.P & OH @15% on

535.55
Cost for 0.66 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 933.15
Rs 919.25

Item Code: 9.7.7.2

P/F panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows etc - for panelled or panelled
and glazed shutters 25 mm to 40 mm thick - Float glass panes - 5.5mm thick

Code

Description

Details of Cost for : 0.66 Sqm

Unit
Quantity

Rate

MATERIALS:
Qty of glass panes
4x47.2x38.65 cm =0.73 sqm
Add wastage @ 10% =0.07 sqm
Total = 0.80sqm
2407

DSR-12

Float glass sheet of nominal thickness 5.5 mm.(weight not less sqm
than 13.50 kg/sqm).

0.80

450.00

Page 223 of 2298

9999
0156
0119
0114
9999

Carriage
Carpenter (average)
Glazier
Beldar
Sundries

L.S.
Day
Day
Day
L.S.

1.82
0.57
0.15
0.15
25.47

Add water charges @ 1% on

1.49
287.00
273.00
247.00
1.49
Total:
642.25

Add C.P & OH @15% on

648.67
Cost for 0.66 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1130.26
Rs 1113.40

Item Code: 9.7.8

P/F panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows etc - for panelled or panelled
and glazed shutters 25 mm to 40 mm thick - Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 m

Code

Description

Details of Cost for : 0.66 Sqm

Unit
Quantity

Rate

MATERIALS:
Qty of wire guage
4x47.2x38.65 cm =0.73 sqm
Add wastage @ 10% =0.07 sqm
Total = 0.80sqm
8737
9999
0112
9999

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm

0.50 mm dia wire
Carriage
L.S.
Carpenter 2nd class
Day
Sundries
L.S.

0.80

760.00

1.82
0.57
4.42

1.49
273.00
1.49
Total:
772.91

Add water charges @ 1% on

Add C.P & OH @15% on

780.64
Cost for 0.66 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1360.21
Rs 1339.90

Item Code: 9.9.1.1

P/F glazed shutters for doors, windows etc using 4mm float glass panes, black enamelled M.S butt hinges, screws etc - Second class
teak wood - 35 mm thick
Details of Cost for : 2.16 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for shutter of a door (glazed)
200xl08cm = 2.16 sqm.
MATERIALS :
(i) Teak wood (2nd class)
Styles : 4x200x9.5x3.5cm = 0.027cum
Rails
Top & intermediate rails
2x110.5x9.5x3.5cm = 0.008cum
Lock and bottom rails
2x110.5xl9.7x3.5cm = 0.015cum
Beadings2x186.1x1.9x1.2cm = 0.001cum

DSR-12

Page 224 of 2298

1190
2406
0595
0597
0637
0640
2204
0156
0119
0114
9999

4x 171.70x 1.9x 1.2cm = 0.002cum.

Total = 0.053 cum.
Add for wastage @ 10% = 0.005cum.
Grand Total = 0.058 cum.
Teak wood (2nd Class)
(ii) Float glasses 4.0mm thick
(iii) Black enamelled M.S. butt hinges-100x58x1.90mm
Black enamelled M.S. butt hinges-50x37xl .50mm
M.S. Screws 40mm
M.S. Screws 20mm
Carriage of Timber
LABOUR:
Carpenter (Avg.)
Glazier
Beldar
Sundries

cum
sqm
10 No
10 No
100 N
100 N
cum

0.058
1.27
6.00
2.00
48.00
8.00
0.058

72000.00
310.00
80.00
45.00
50.00
25.00
100.11

Day
Day
Day
L.S.

1.83
0.23
0.77
40.43

287.00
273.00
247.00
1.49
Total:
5496.94

Add water charges @ 1% on

Add C.P & OH @15% on

5551.91
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2955.88
Rs 2955.90

Item Code: 9.9.1.2

P/F Glazed shutters using (4mm thick) glass panes 2nd class teak wood 30 mm thick
Details of Cost for : 2.16 Sqm
Code
Description
Unit
Quantity
Details of cost for shutter of a door (glazed)
200x108cm = 2.16 sqm.
MATERIALS :
(i) Teak wood
Styles : 4x200x9.5x3.0cm = 0.023cum+
Rails
Top & intermediate rails
2x110.5x9.5x3.0cm = 0.006cum+
Lock and bottom rails
2x110.5x19.7x3.0cm = 0.013cum+
Beadings2x186.1xl.9xl.2cm = 0.001cum+
4x 171.70x 1.9x 1.2cm = 0.002cum.
Total = 0.045 cum.+
Add for wastage @ 10% = 0.005cum.
Grand Total = 0.050 cum.
1190
Teak wood
cum
0.05
2406
(ii) Float glasses 4.0mm thick
sqm
1.27
0595
(iii) Black enamelled M.S. butt
10 No
6.00
hinges-100x58x1.90mm
0597
Black enamelled M.S. butt
10 No
2.00
hinges-50x3 7x 1.50mm
0637
M.S. Screws 40mm
100 N
48.00
0640
M.S. Screws 20mm
100 N
8.00
2204
(iv) Carriage of timber
cum
0.05
LABOUR:
0156
Carpenter (Avg.)
Day
1.83
0119
Glazier
Day
0.23
0114
Beldar
Day
0.77
9999
Sundries
L.S.
40.43

DSR-12

Rate

72000.00
310.00
80.00
45.00
50.00
25.00
100.11
287.00
273.00
247.00
1.49

Page 225 of 2298

Add water charges @ 1% on

Total:
4920.14

Add C.P & OH @15% on

4969.34
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2645.71
Rs 2645.70

Item Code: 9.9.2.1

P/F Glazed shutters using (4mm thick) glass panes Kiln seasoned and chemically treated hollock wood : 35 mm thick.

Code

Description
Details of cost for shutter of a door (glazed)
200x108cm = 2.16 sqm.
MATERIALS :
(i) Hollock wood
Styles : 4x200x9.5x3.5cm = 0.027 cum+
Rails
Top & intermediate rails
2x110.5x9.5x3.50cm = 0.008cum+
Lock and bottom rails
2x110.5x19.7x3.50cm = 0.015cum+
Beadings2xl86.1x1.9x1.2cm = 0.001cum+
4x 171.70x 1.9x 1.2cm = 0.002cum.
Total = 0.053 cum.+
Add for wastage @ 10% = 0.005cum.
Grand Total = 0.058 cum or = 58 cudm

2505
2504
9999
2406
0595

Hollock wood
(ii) Kiln seasoning
(iii) Chemical treatment
(iv) Float glassess 4.0 mm thick
(v) Black enamelled M.S. Butt
Black enamelled M.S. butt
hinges 50x37x 1.50mm
M.S. Screws 40mm
M.S. Screws 20mm
(iv) Carriage of timber
LABOUR:
Carpenter (Avg.)
Glazier
Beldar
Sundries

0597
0637
0640
2204
0156
0119
0114
9999

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

cum
cum
L.S.
sqm
10 No

0.058
0.058
9.10
1.27
6.00

35000.00
680.00
1.49
310.00
80.00

10 No
100 N
100 N
cum

2.00
48.00
8.00
0.058

45.00
50.00
25.00
100.11

Day
Day
Day
L.S.

1.83
0.23
0.77
40.43

287.00
273.00
247.00
1.49
Total:
3403.94

Add water charges @ 1% on

Add C.P & OH @15% on

3437.98
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1830.41
Rs 1830.40

Item Code: 9.9.2.2

P/F Glazed shutters using (4mm thick) glass panes Kiln seasoned and chemically treated hollock wood : 30 mm thick.

DSR-12

Page 226 of 2298

Code

2505
2504
9999
2406
0595
0597
0637
0640
2204
0156
0119
0114
9999

Description
Details of cost for shutter of a door (glazed)
200x108cm = 2.16 sqm.
MATERIALS :
(i) Hollock wood
Styles : 4x200x9.50x3.0cm = 0.023cum+
Rails
Top & intermediate rails
2x110.5x9.50x3.0cm = 0.006cum+
Lock and bottom rails
2x110.5x19.70x3.0cm = 0.013cum+
Beadings2x186.1x1.9x1.2cm = 0.001cum+
4x 171.70x 1.9x 1.2cm = 0.002cum.
Total = 0.045 cum.+
Add for wastage @ 10% = 0.005cum.
Grand Total = 0.050
Hollock wood
(ii) Kiln seasoning
(iii) Chemical treatment
(iv) Float glassess 4.0 mm thick
(v) Black enamelled M.S. Butt hinges 100x58x1.90mm
Black enamelled M.S. butt hinges 50x37x 1.50mm
M.S. Screws 40mm
M.S. Screws 20mm
(iv) Carriage of timber
LABOUR:
Carpenter (Avg.)
Glazier
Beldar
Sundries

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

cum
cum
L.S.
sqm
10 No
10 No
100 N
100 N
cum

0.05
0.05
9.10
1.27
6.00
2.00
48.00
8.00
0.05

35000.00
680.00
1.49
310.00
80.00
45.00
50.00
25.00
100.11

Day
Day
Day
L.S.

1.83
0.23
0.77
40.43

287.00
273.00
247.00
1.49
Total:
3117.70

Add water charges @ 1% on

Add C.P & OH @15% on

3148.88
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1676.49
Rs 1676.50

Item Code: 9.9.3.1

P/F glazed shutters for doors, windows etc., using 4 mm thick float glass panes , M.S. pressed butt hinges - Kiln seasoned selected
planks of sheesham wood - 35mm thick
Details of Cost for : 2.16 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
(i) Hollock Wood
Styles : 4 x200 x 9.53 x 3.5 cm = 0.27 cum +
Rails :
Top & Intermediate rails :
2 x 110.5 x 10 x 3.5 cm = 0.008 cum +
Lock and Bottom rails
2 x 110.5 x 19.7 x 3.5 cm = 0.015 cum +
Beadings 2x186.1x1.9x1.2cm = 0.002 cum
Total = 0.053 cum
Add wastage @ 10% = 0.005 cum
Grand Total = 0.058 cum or 58 cudm

DSR-12

Page 227 of 2298

1200
2504
2204
2406

Cum
cum
cum
sqm

0.058
0.058
0.058
1.27

65000.00
680.00
100.11
310.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Kiln seasoned selected sheesum wood planks

Kiln seasoning of timber
Carraige of Timber
Float glass sheet of nominal thickness 4 mm (weight not less
than 10kg/sqm).
Bright finished or black enameled mild steel butt hinges
100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges
50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0156
0119
0114
9999

LABOUR:
Carpenter (average)
Glazier
Beldar
Sundries

Day
Day
Day
L.S.

1.83
0.23
0.77
40.43

287.00
273.00
247.00
1.49
Total:
5130.38

0595
0597

Add water charges @ 1% on

Add C.P & OH @15% on

5181.68
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2758.76
Rs 2758.75

Item Code: 9.9.3.2

P/F glazed shutters for doors, windows etc using 4mm glass panes M.S. pressed butt hinges - Kiln seasoned selected planks of
sheesham wood - 30mm thick
Details of Cost for : 2.16 Sqm
Code
Description
Unit
Quantity
Rate
Sheesham wood:
Styles 4x200x9.5x3 cm = 0.023 cum +
Rails
Top & intermediate rails
2 x 110.5 x 9.5x3 cm = 0.006 cum +
Lock and bottom rails:
2 x 110.5 x 19.7x3 cm = 0.013 cum +

0637

Beading 2x.186.1x1.9x1.2 cm = 0.002 cum

Total = 0.045 cum
Add for wastage @ 10% = 0.005 cum
Grand Total : 0.05 cum or 50 cudm
Kiln seasoned selected sheesum wood planks
Carraige of Timber
Kiln seasoning of timber
Float glass sheet of nominal thickness 4 mm (weight not less
than 10kg/sqm).
Bright finished or black enameled mild steel butt hinges
100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges
50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0156

LABOUR:
Carpenter (average)

Day

1.83

287.00

1200
2204
2504
2406
0595
0597

DSR-12

Cum
cum
cum
sqm

0.05
0.05
0.05
1.27

65000.00
100.11
680.00
310.00

10 No

6.00

80.00

10 No

2.00

45.00

100 N

48.00

50.00

Page 228 of 2298

0119
0114
9999

Glazier
Beldar
Sundries

Day
Day
L.S.

0.23
0.77
40.43

Add water charges @ 1% on

273.00
247.00
1.49
Total:
4604.14

Add C.P & OH @15% on

4650.18
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2475.79
Rs 2475.80

Item Code: 9.10.1

P/F factory made laminated veneer lumber glazed shutter conforming IS: 14616 to TADS 15:2001,using 4mm thick float glass panes
for doors,windows i/c black enamelled M.S. butt hinges with necessary screws: 30 mm thick shutters.

Code

7151
9999
0595
0597
0637
0640
0156
0114
9999

Description
Details of cost of one shutter
220x108cm = 2.38sqm.
MATERIALS:
Factory, made shutters glazed laminated veneer lumber door
shutter
Carriage of shutters
Fittings:
Black enamelled M.S. butt hinges 100x58x1.90mm
Black enamelled M.S. butt hinges 50x37x 1.50mm
M.S. Screws-40mm
M.S. Screws-20mm
LABOUR:
Carpenter (Avg.)
Beldar
Sundries

Details of Cost for : 2.38 Sqm

Unit
Quantity

Rate

sqm

2.38

1580.00

L.S.

29.64

1.49

10 No
10 No
100 N
100 N

6.00
2.00
48.00
8.00

80.00
45.00
50.00
25.00

Day
Day
L.S.

0.52
0.60
35.88

287.00
247.00
1.49
Total:
4238.46

Add water charges @ 1% on

Add C.P & OH @15% on

4280.84
Cost for 2.38 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2068.47
Rs 2068.45

Item Code: 9.11.1

Extra for providing heavy sheet glass panes instead of ordinary glass panes in glazed shutters 5.5mm instead of 4mm

Code

2407
2406

Description
Details of cost for one sqm.
MATERIALS:
Glasse Panes of 13.75 kg per sqm.
Deduct panels of 10 kg per sqm.

Details of Cost for : 1.00 Sqm

Unit
Quantity

sqm
sqm

1.00
-1.00

Add water charges @ 1% on

Rate

450.00
310.00
Total:
140.00

Add C.P & OH @15% on

141.40
Cost for 1.00 Sqm
Rate per One Sqm:

DSR-12

Rs 162.61

Page 229 of 2298

Rate as per DSR-12:

Rs 162.60

Item Code: 9.12

Extra for using frosted glass panes 4mm instead of 4mm ordinary glass panes
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Materials:
7032
Froasted glass panes (4.0mm)
sqm
1.00
2406
Deduct cost of ordinary glass panes (4.0mm
sqm
-1.00
Add water charges @ 1% on

Rate
315.00
310.00
Total:
5.00

Add C.P & OH @15% on

5.05
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 5.81
Rs 5.80

Item Code: 9.13

Deduct for using pin headed glass panes instead of ordinary glass panes 4 mm thick
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Cost for 1 sqm.
MATERIALS:
7451
Pin headed glass panes (4.0mm)
sqm
1.00
2406
Deduct cost of ordinary glass panes (4.0mm
sqm
-1.00
thick)
Add water charges @ 1% on

Rate

255.00
310.00
Total:
-55.00

Add C.P & OH @15% on

-55.55
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

-Rs 63.88
-Rs 63.90

Item Code: 9.14

Extra for providing stainless steel butt hinges instead of MS butt hinges with screws
Details of Cost for : 2.16 Sqm
Code
Description
Unit
Quantity
Details of cost for one door shutter of a door
200xl08cm = 2.16 sqm.
stainless steel butt hinges8220
100x60x2.5 mm
10 No
6.00
8218
50x37x1.5 mm
10 No
2.00
8211
Stainless steel screws 40 mm
100 N
48.00
8214
Stainless steel screws 20 mm
100 N
8.00
Deduct
Black enameled butt hinges
0595
100x58x1.90mm
10 No
-6.00
0597
50x37x1.5mm
10 No
-2.00
Black enameled Iron
0637
Screws-40mm
100 N
-48.00
0640
Screws-20mm
100 N
-8.00
Add water charges @ 1% on

DSR-12

Rate

230.00
125.00
195.00
95.00

80.00
45.00
50.00
25.00
Total:
181.20

Page 230 of 2298

Add C.P & OH @15% on

183.01
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 97.44
Rs 97.45

Item Code: 9.15.1.1

Deduct if fixed shutters without hinges Stainless steel butt hinges For 2nd class teak wood and other inferior class of wood shutters

Code

8218

Description
Details of cost of fittings for shutter of size
200x108cm = 2.16 sqm.
MATERIALS:
Anodised aluminum butt hinges
Stainless steel butt hinges (heavy weight)
100x60x2.5 mm IS : 12817 marked
Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked

8211
8214

Stainless steel screws 40 mm

Stainless steel screws 20 mm

8220

Details of Cost for : -2.16 Sqm

Unit
Quantity

Rate

10 No

6.00

230.00

10 No

2.00

125.00

100 N
100 N

48.00
8.00

195.00
95.00
Total:
264.20

Add water charges @ 1% on

Add C.P & OH @15% on

266.84
Cost for -2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

-Rs 142.07
-Rs 142.05

Item Code: 9.15.2.1

Deduct if fixed shutters without hinges Black MS butt hinges For 2nd class teak wood and other inferior class of wood shutters

Code

0595
0597
0637
0640

Description
Details of cost of hinges with screws for shutters of size
200x108cm = 2.16 sqm.
MATERIALS:
Iron butt hinges 100x58x1.90 mm (medium)
Iron butt hinges 50x37x1.50 mm (medium)
Iron screws 40 mm
Iron screws 20 mm

Details of Cost for : -2.16 Sqm

Unit
Quantity

10 No
10 No
100 N
100 N

6.00
2.00
48.00
8.00

Add water charges @ 1% on

Rate

80.00
45.00
50.00
25.00
Total:
83.00

Add C.P & OH @15% on

83.83
Cost for -2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

-Rs 44.63
-Rs 44.65

Item Code: 9.16.1.1

P/F 25mm thick shutters for cup board etc Panelled or panelled & glazed shutters 2nd class teak wood i/c anodised aluminium
hinges
Details of Cost for : 2.16 Sqm
Code
Description
Unit
Quantity
Rate

DSR-12

Page 231 of 2298

1190
2204
2406
0694
0586
0111
0119
0114
9999

Details of cost for shutters of a cup-board (half glazed and

half panelled) 200x108cm = 2.16 sqm.
MATERIALS:
Styles-4x200x8.0x2.5cm = 0.016 cum+
Rails-Top rail-1x1 10.5x8.0x2.5cm = 0.0022cum+
Lock and bottom rail-2x110.5x8.0x2.5cm =
0.0044 cum.+
Panels-2x48x41 x 1.6cm = 0.006cum+
Sash bars-2x114x3.8x2.5cm = 0.003cum+
6x48x3.8x2.5cm = 0.003 cum+
Beading-16x92x 1.4x 1.2cm = 0.002cum
Total = 0.0366
Add for wastage @ 10% = 0.0037 cum. Grand
Total = 0.0403 cum or 40 cudm
Second class teak wood .
cum
Carriage of timber
cum
Float glasses 4.0mm thick
sqm
FittingsAnodised aluminium butt hinges-75x45x3.2 mm
10 No
C.P. brass screws 40mm
100 N
LABOURCarpenter 1st class
Day
Glazier
Day
Beldar
Day
Sundries
L.S.

0.04
0.04
0.99

72000.00
100.11
310.00

6.00
48.00

390.00
190.00

2.40
0.18
0.77
40.43

301.00
273.00
247.00
1.49
Total:
4538.07

Add water charges @ 1% on

Add C.P & OH @15% on

4583.45
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2440.26
Rs 2440.25

Item Code: 9.16.1.2

Providing and fixing 25 mm thick shutters for cup board etc. - Panelled or panelled & glazed shutters - Second class teak wood with
nickel plated bright finished M.S. piano hinges.

Code

Description

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

MATERIALS:
Styles 4x200x8.00x2.5 cm = 0.016 cum +
Rails
Top rail
1 x 110.5 x 8.0x2.5 cm = 0.0022 cum +
Lock and bottom rails:
2 x 110.5 x 10.5x2.5 cm = 0.044 cum +

1190

DSR-12

Panels:
2x.48x41x1.6 cm = 0.006 cum +
Sash bars :
2x114x3.8x2.5 cm = 0.003 cum +
6x48x3.8x2.5 = 0.003 cum +
Beading :
16x92x1.4x1.2cm = 0.002 cum
Total = 0.036 cum
Add for wastage @ 10% = 0.0037 cum
Grand Total : 0.0403 cum or 40 cudm
Second class teak wood in planks

cum

0.04

72000.00

Page 232 of 2298

2204
2406

0608
0586
0111
0119
0114
9999

Carraige of Timber
cum
Float glass sheet of nominal thickness 4 mm (weight not less sqm
than 10kg/sqm).
Fittings :
Nickel plated mild steel piano hinges 1 mm thick 35 mm wide metre
Chromium plated Brass screws 40 mm
LABOUR:
Carpenter 1st class
Glazier
Beldar
Sundries

100 N
Day
Day
Day
L.S.

0.04
0.99

100.11
310.00

4.00

35.00

114.00

190.00

2.40
0.18
0.77
40.43

301.00
273.00
247.00
1.49
Total:
4569.47

Add water charges @ 1% on

Add C.P & OH @15% on

4615.16
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2457.14
Rs 2457.15

Item Code: 9.16.2.1

P/F 25mm thick shutters for cup board etc Glazed shutters 2nd class teak wood i/c anodised aluminium hinges
Details of Cost for : 2.16 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for shutter of cup-board
200xl08cm = 2.16 sqm.
MATERIALS :
(i) Teak wood second class
Styles : 4x200x9.5x2.5 cm = 0.019 cum
Rails
Top & intermediate rails
2x110.5x9.5x2.5 cm = 0.006 cum
Lock and bottom rails
2x110.5x19.7x2.5 cm = 0.011 cum
Beadings2x186.1x1.9xl.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.039 cum.
Add for wastage @ 10% = 0.004 cum.
Grand Total = 0.043 cum. 43 cudm
1190
Teak wood second class
cum
0.043
72000.00
2406
(ii) Glasses (10kg/sqm) 4.0mm thick
sqm
1.27
310.00
0694
Anodised Aluminium butt hinges 75x45x3.2 mm
10 No
6.00
390.00
0639
(iv)M.S. screws 25 mm
100 N
48.00
30.00
2204
(v) Carriage of timber
cum
0.043
100.11
LABOUR:
0156
Carpenter (Avg.)
Day
1.83
287.00
0119
Glazier
Day
0.23
273.00
0114
Beldar
Day
0.77
247.00
9999
Sundries
L.S.
40.43
1.49
Total:
Add water charges @ 1% on
4580.83
Add C.P & OH @15% on
4626.64
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 2463.26
Rs 2463.25

Page 233 of 2298

Item Code: 9.16.2.2

Providing and fixing 25 mm thick shutters for cup board etc. - Glazed shutters - Second class teak wood - nickel plated bright
finished M.S. piano hinges
Details of Cost for : 2.16 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
Styles 4x200x9.5x2.5 cm = 0.019 cum +
Rails
Top & intermediate rails
2 x 110.5 x 9.5x2.5 cm = 0.006 cum +
Lock and bottom rails:
2 x 110.5 x 19.7x2.5 cm = 0.011 cum +

0608

Total = 0.039 cum

Add for wastage @ 10% = 0.004 cum
Grand Total : 0.0403 cum or 43cudm (?)
Second class teak wood in planks
Carraige of Timber
Float glass sheet of nominal thickness 4 mm (weight not less
than 10kg/sqm).
Nickel plated mild steel piano hinges 1 mm thick 35 mm wide

0639

Bright finished or black enameled mild steel screws 25 mm

100 N

0156
0119
0114
9999

LABOUR:
Carpenter (average)
Glazier
Beldar
Sundries

Day
Day
Day
L.S.

1190
2204
2406

cum
cum
sqm

0.043
0.04
1.27

72000.00
100.11
310.00

metre

4.00

35.00

114.00

30.00

1.83
0.23
0.77
40.43

287.00
273.00
247.00
1.49
Total:
4506.33

Add water charges @ 1% on

Add C.P & OH @15% on

4551.39
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2423.19 (Error in DAR Calculations)

Rs 2423.35

Item Code: 9.17.1

P/F flat pressed 3layer particle board(medium density) exterior grade (Grade I) 12 mm thick
Details of Cost for : 7.00 Sqm
Code
Description
Unit
Quantity
Details of cost for 350x200cm = 7sqm.
MATERIALS12mm thick particle board = 7.00sqm.+
Add wastage @ 5% = 0.35 sqm.
0341
Total = 7.35 sqm.
sqm
7.35
9999
Carriage of particle board
L.S.
13.52
9999
Sundries and screws
L.S.
26.91
LABOUR0112
Carpenter 2nd class
Day
0.90
0114
Beldar
Day
1.00
Add water charges @ 1% on

Rate

325.00
1.49
1.49
273.00
247.00
Total:
2941.69

Add C.P & OH @15% on

2971.11
Cost for 7.00 Sqm

DSR-12

Page 234 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 488.11
Rs 488.10

Item Code: 9.17.2

P/F flat pressed 3layer particle board(medium density) exterior grade (Grade I) 18 mm thick
Details of Cost for : 7.00 Sqm
Code
Description
Unit
Quantity
Details of cost for 350x200cm = 7sqm.
MATERIALS12mm thick particle board = 7.00sqm.+
Add wastage @ 5% = 0.35 sqm.
7055
Total = 7.35 sqm.
sqm
7.35
9999
Carriage of particle board
L.S.
19.76
9999
Sundries and screws
L.S.
26.91
LABOUR0112
Carpenter 2nd class
Day
0.90
0114
Beldar
Day
1.00
Add water charges @ 1% on

Rate

390.00
1.49
1.49
273.00
247.00
Total:
3428.74

Add C.P & OH @15% on

3463.03
Cost for 7.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 568.93
Rs 568.95

Item Code: 9.18.1

P/F prelaminated flat pressed 3 layer (medium density) particle board with one side decorative and other side balancing lamination
Grade I Type II exterior grade 18 mm thick
Details of Cost for : 0.60 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 4 nos.
75x20cm shelves = 0.60 sqm.
MATERIALS18mm thick particle board =
4x75x20cm = 0.60sqm.+
Wastage @ 5% = 0.03sqm:
7478
Total = 0.63 sqm.
sqm
0.63
810.00
9999
Carriage of board
L.S.
0.91
1.49
LABOUR0112
Carpenter 2nd class
Day
0.11
273.00
0114
Beldar
Day
0.06
247.00
9999
Sundries, Painting edges & Screws
L.S.
7.80
1.49
Total:
Add water charges @ 1% on
568.13
Add C.P & OH @15% on
573.81
Cost for 0.60 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1099.80
Rs 1099.80

Item Code: 9.18.2

P/F prelaminated flat pressed 3 layer (medium density) particle board with one side decorative and other side balancing lamination
Grade I Type II exterior grade 25 mm thick
Details of Cost for : 0.60 Sqm

DSR-12

Page 235 of 2298

Code

7479
9999
0112
0114
9999

Description
Details of cost for 4 nos.
75x20cm shelves = 0.60 sqm.
MATERIALS25mm thick particle board =
4x75x20cm = 0.60sqm.+
Wastage @ 5% = 0.03sqm:
Total = 0.63 sqm.
Carriage of board
LABOURCarpenter 2nd class
Beldar
Sundries, Painting edges & Screws

Unit

Quantity

Rate

sqm
L.S.

0.63
1.82

880.00
1.49

Day
Day
L.S.

0.11
0.06
7.80

273.00
247.00
1.49
Total:
613.58

Add water charges @ 1% on

Add C.P & OH @15% on

619.72
Cost for 0.60 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1187.80
Rs 1187.80

Item Code: 9.20.1

P/F flush shutters decorative type, core of block board with teak 3mm ply veneering on both faces 35mm
butt hinges
Details of Cost for : 2.20 Sqm
Code
Description
Unit
Quantity
Details of cost for 2.20 sqm.
MATERIALS0713
35mm thick door shutters
sqm
2.20
9999
Carriage of door
L.S.
29.64
8220
Stainless steel butt hinges (heavy weight)
10 No
6.00
100x60x2.5 mm IS : 12817 marked
8211
Stainless steel screws 40 mm
100 N
48.00
LABOURFor fixing shutter and fittings
0156
Carpenter (Average)
Day
0.55
0114
Beldar
Day
0.55
Add water charges @ 1% on

thick i/c stainless steel

Rate

1600.00
1.49
230.00
195.00

287.00
247.00
Total:
4089.46

Add C.P & OH @15% on

4130.35
Cost for 2.20 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2159.05
Rs 2159.05

Item Code: 9.20.2

P/F flush shutters decorative type, core of block board with teak 3mm ply veneering on both faces 30mm thick i/c stainless steel
butt hinges
Details of Cost for : 2.20 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 2.2 sqm.
MATERIALS0714
30mm thick door shutters
sqm
2.20
1450.00
9999
Carriage of door
L.S.
29.64
1.49
8220
Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No
6.00
230.00
12817 marked

DSR-12

Page 236 of 2298

8211

0156
0114

Stainless steel screws 40 mm

LABOURFor fixing shutter and fittings.
Carpenter (Average)
Beldar

100 N

Day
Day

48.00

195.00

0.55
0.55

287.00
247.00
Total:
3759.46

Add water charges @ 1% on

Add C.P & OH @15% on

3797.05
Cost for 2.20 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1984.82
Rs 1984.80

Item Code: 9.20.3

P/F flush shutters decorative type, core of block board with teak 3mm ply veneering on both faces 25mm thick i/c nickel plated MS
Piano hinges
Details of Cost for : 2.20 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 2.2 sqm.
MATERIALS0715
25mm thick door shutters
sqm
2.20
1300.00
9999
Carriage of door
L.S.
29.64
1.49
Fittings-For a door 2.2x1.00m = 2.20 sqm.
0608
Nickel plated bright finished M.S. Piano hinges
metre
4.40
35.00
0639
Screws 25mm
100 N
125.00
30.00
LABOURFor fixing shutter and fittings.
0156
Carpenter (Average)
Day
0.55
287.00
0114
Beldar
Day
0.55
247.00
Total:
Add water charges @ 1% on
3389.36
Add C.P & OH @15% on
3423.25
Cost for 2.20 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1789.43
Rs 1789.45

Item Code: 9.21.1

P/F Flush shutters non-decorative type, core of block_x000D_
board with commercial 3 ply veneering on both faces_x000D_
Code
0717

Description
35mm thick door shutters

9999

Carriage of door

Details of Cost for : 2.20 Sqm

Unit
Quantity
sqm

8220
8211

L.S.
Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No
12817 marked
Stainless steel screws 40 mm
100 N
Labour :

Rate

2.20

1100.00

29.64
6.00

1.49
230.00

48.00

195.00

0.55
0.55

287.00
247.00
Total:

For fixing shutter and fittings.

0156
0114

DSR-12

Carpenter (average)
Beldar

Day
Day

Page 237 of 2298

Add water charges @ 1% on

2989.46

Add C.P & OH @15% on

3019.35
Cost for 2.20 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1578.30
Rs 1578.30

Item Code: 9.21.2

P/F ISI marked flush door shutter - non-decorative 30mm thick i/c stainless steel butt hinges:
Details of Cost for : 2.20 Sqm
Code
Description
Unit
Quantity
MATERIALS:
0718
Block board construction flush
sqm
2.20
9999
Carriage of door
L.S.
29.64
8220
Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No
6.00
12817 marked
8211
40mm Stainless Steel Screws
100 N
48.00
LabourFor fixing shutter and fittings.
0156
0114

Carpenter (average)
Beldar

Day
Day

0.55
0.55

Add water charges @ 1% on

Rate
950.00
1.49
230.00
195.00

287.00
247.00
Total:
2659.46

Add C.P & OH @15% on

2686.05
Cost for 2.20 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1404.07
Rs 1404.05

Item Code: 9.21.3

P/F ISI marked flush door shutters non-decorative type, 3 ply veneering : 25mm thick including ISI marked nickel plated bright
finished M.S. piano hinges.
Details of Cost for : 2.20 Sqm
Code
Description
Unit
Quantity
Rate
0719
25mm thick door shutters
sqm
2.20
850.00
9999
Carriage of door
L.S.
29.64
1.49
Fittings-For a door 2.2x1.0m = 2.20 sqm.
0608
0639

Piano hinges - Nickel plated 35mm wide - 1mm thick.

Screws - 25mm
For fixing shutter and fittings.

metre
100 N

0156
0114

Carpenter (average)
Beldar

Day
Day

4.40
125.00

35.00
30.00

0.55
0.55

287.00
247.00
Total:
2399.36

Add water charges @ 1% on

Add C.P & OH @15% on

2423.35
Cost for 2.20 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 1266.75
Rs 1266.75

Page 238 of 2298

Item Code: 9.22.1

Extra for P/F flush doors with decorative veneering On one side in item 9.25
Code
7307

Details of Cost for : 1.00 Sqm

Unit
Quantity

Description
Details of cost for 1 sqm.
Extra for providing teak veneering on one side

sqm

1.00

Add water charges @ 1% on

Rate
320.00
Total:
320.00

Add C.P & OH @15% on

323.20
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 371.68
Rs 371.70

Item Code: 9.23

Extra for providing lipping with 2nd class teak wood battens 25mm minimum depth on all edges of shutters Over item 9.24 and
9.25
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 1 sqm. of door area
0752
Door area
sqm o
1.00
280.00
Total:
Add water charges @ 1% on
280.00
Add C.P & OH @15% on
282.80
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 325.22
Rs 325.20

Item Code: 9.24.1

Extra for P/F vision panel in flush door shutters Rectangular or square
Code
0753

Description
Details of cost for 1 sqm. of door area
Rectangular or square per panel door area

Details of Cost for : 1.00 Sqm

Unit
Quantity
sqm o

1.00

Add water charges @ 1% on

Rate
110.00
Total:
110.00

Add C.P & OH @15% on

111.10
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 127.77
Rs 127.75

Item Code: 9.24.2

Extra for P/F vision panel in flush door shutters Circular
Code
0754

DSR-12

Description
Details of cost for 1 sqm. of door area
Circular panel door area

Details of Cost for : 1.00 Sqm

Unit
Quantity
Sqm o

1.00

Rate

Add water charges @ 1% on

170.00
Total:
170.00

Add C.P & OH @15% on

171.70

Page 239 of 2298

Cost for 1.00 Sqm

Rate per One Sqm:
Rate as per DSR-12:

Rs 197.46
Rs 197.45

Item Code: 9.25.1

Extra if louvers (upto 0.2sqm) are provided in flush door shutters Decorative type door
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Details of cost for 1 sqm. of door area
0755
Decorative type door
sqm o
1.00
Add water charges @ 1% on

Rate
290.00
Total:
290.00

Add C.P & OH @15% on

292.90
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 336.84
Rs 336.85

Item Code: 9.26

Extra for cutting rebate in flush door shutters
Code
0757

Description
Details of cost for 1 sqm. of door area
Door area

Details of Cost for : 1.00 Sqm

Unit
Quantity
sqm o

1.00

Add water charges @ 1% on

Rate
80.00
Total:
80.00

Add C.P & OH @15% on

80.80
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 92.92
Rs 92.90

Item Code: 9.27.1.1.1

P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors,
windows etc - 35 mm thick - M.S. pressed butt hinges - Second class teak wood

Code

1190

DSR-12

Description
MATERIALS:
TEAK WOOD (2ND CLASS)
Styles 4x200x9.5x3.5 cm = 0.026 cum +
Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum +
Lock and bottom rails:
2 x 110.5 x 19.7x3.5 cm = 0.0152 cum +
Beading
(2x.312+2X150)x1.2x1.2 cm = 0.001 cum
Total = 0.0464 cum
Add for wastage @ 10% = 0.005 cum
Grand Total : 0.0514 cum or 51.4 cudm
Second class teak wood in planks
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

Details of Cost for : 2.16 Sqm

Unit
Quantity

cum

0.0514

Rate

72000.00

Page 240 of 2298

7029

sqm

1.41

230.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Galvanised wire mesh of average width of aperture 1.4 mm

and nominal dia. of wire 0.63 mm
Bright finished or black enameled mild steel butt hinges
100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges
50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

2204

Carraige of Timber
LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

cum

0.0514

100.11

Day
Day
Day
Day
L.S.

1.30
0.90
1.05
0.105
33.80

301.00
273.00
247.00
301.00
1.49
Total:
5091.57

0595
0597

0111
0112
0114
0130
9999

Add water charges @ 1% on

Add C.P & OH @15% on

5142.49
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2737.90
Rs 2737.90

Item Code: 9.27.1.1.2

P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors,
windows etc - 35 mm thick - M.S. pressed butt hinges - Kiln seasoned chemically treated hollock wood.

Code

2505
2204
2504
9999

7029
0595
0597
0637

DSR-12

Description
MATERIALS:
Hollock wood :
Styles 4x200x9.5x3.5 cm = 0.026 cum +
Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum +
Lock and bottom rails:
2 x 110.5 x 19.7x3.5 cm = 0.0152 cum +
Beading
(2x.312+2X150)x1.2x1.2 cm = 0.001 cum
Total = 0.0464 cum
Add for wastage @ 10% = 0.005 cum
Grand Total : 0.0514 cum or 51.4 cudm
Hollock wood in planks
Carraige of Timber
Kiln seasoning of timber
Chemical treatment
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm
Galvanised wire mesh of average width of aperture 1.4 mm
and nominal dia. of wire 0.63 mm
Bright finished or black enameled mild steel butt hinges
100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges
50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

cum
cum
cum
L.S.

0.0514
0.0514
0.0514
8.97

35000.00
100.11
680.00
1.49

sqm

1.41

230.00

10 No

6.00

80.00

10 No

2.00

45.00

100 N

48.00

50.00

Page 241 of 2298

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

0111
0112
0114
0130
9999

LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

Day
Day
Day
Day
L.S.

8.00

25.00

1.30
0.90
1.05
0.105
33.80

301.00
273.00
247.00
301.00
1.49
Total:
3238.09

Add water charges @ 1% on

Add C.P & OH @15% on

3270.47
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1741.22
Rs 1741.20

Item Code: 9.27.1.1.3

P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors,
windows etc - 35 mm thick - M.S. pressed butt hinges - Kiln seasoned selected class sesham wood.

Code

1200
2204
2504

Details of Cost for : 2.16 Sqm

Unit
Quantity

Description
MATERIALS:
Sesham wood :
Styles 4x200x9.5x3.5 cm = 0.026 cum +
Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum +
Lock and bottom rails:
2 x 110.5 x 19.7x3.5 cm = 0.0152 cum +
Beading
(2x.312+2X150)x1.2x1.2 cm = 0.001 cum
Total = 0.0464 cum
Add for wastage @ 10% = 0.005 cum
Grand Total : 0.0514 cum or 51.4 cudm
Kiln seasoned selected sheesum wood planks
Carraige of Timber
Kiln seasoning of timber
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

Cum
cum
cum

0.0514
0.0514
0.0514

65000.00
100.11
680.00

sqm

1.41

230.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Galvanised wire mesh of average width of aperture 1.4 mm

and nominal dia. of wire 0.63 mm
Bright finished or black enameled mild steel butt hinges
100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges
50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0111
0112
0114
0130
9999

LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

Day
Day
Day
Day
L.S.

1.30
0.90
1.05
0.105
33.80

301.00
273.00
247.00
301.00
1.49
Total:
4766.72

7029
0595
0597

Add water charges @ 1% on

DSR-12

Rate

Page 242 of 2298

Add C.P & OH @15% on

4814.39
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2563.22
Rs 2563.20

Item Code: 9.27.1.2.1

P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors,
windows etc - 35 mm thick - Stainless steel butt hinges - Second class teak wood

Code

1190
2204

7029
8220
8218
8211
8214
0111
0112
0114
0130
9999

Description
MATERIALS:
TEAK WOOD (2ND CLASS)
Styles 4x200x9.5x3.5 cm = 0.026 cum +
Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum +
Lock and bottom rails:
2 x 110.5 x 19.7x3.5 cm = 0.0152 cum +
Beading
(2x.312+2X150)x1.2x1.2 cm = 0.001 cum
Total = 0.0464 cum
Add for wastage @ 10% = 0.005 cum
Grand Total : 0.0514 cum or 51.4 cudm
Second class teak wood in planks
Carraige of Timber
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

Details of Cost for : 2.16 Sqm

Unit
Quantity

cum
cum

0.0514
0.0514

72000.00
100.11

1.41

230.00

6.00

230.00

2.00

125.00

100 N
100 N

48.00
8.00

195.00
95.00

Day
Day
Day
Day
L.S.

1.30
0.90
1.05
0.105
33.80

301.00
273.00
247.00
301.00
1.49
Total:
5272.77

Galvanised wire mesh of average width of aperture 1.4 mm sqm

and nominal dia. of wire 0.63 mm
Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No
12817 marked
Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No
Stainless steel screws 40 mm
Stainless steel screws 20 mm
LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

Rate

Add water charges @ 1% on

Add C.P & OH @15% on

5325.50
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2835.34
Rs 2835.35

Item Code: 9.27.1.2.2

P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors,
windows etc - 35 mm thick - Stainles steel butt hinges - Kiln seasoned chemically treated hollock wood.
Details of Cost for : 2.16 Sqm

DSR-12

Page 243 of 2298

Code

2505
2204
2504
9999

7029
8220
8218
8211
8214
0111
0112
0114
0130
9999

Description
MATERIALS:
Hollock wood :
Styles 4x200x9.5x3.5 cm = 0.026 cum +
Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum +
Lock and bottom rails:
2 x 110.5 x 19.7x3.5 cm = 0.0152 cum +
Beading
(2x.312+2X150)x1.2x1.2 cm = 0.001 cum
Total = 0.0464 cum
Add for wastage @ 10% = 0.005 cum
Grand Total : 0.0514 cum or 51.4 cudm
Hollock wood in planks
Carraige of Timber
Kiln seasoning of timber
Chemical treatment
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

Unit

Quantity

Rate

cum
cum
cum
L.S.

0.0514
0.0514
0.0514
8.97

35000.00
100.11
680.00
1.49

1.41

230.00

6.00

230.00

2.00

125.00

100 N
100 N

48.00
8.00

195.00
95.00

Day
Day
Day
Day
L.S.

1.30
0.90
1.05
0.105
33.80

301.00
273.00
247.00
301.00
1.49
Total:
3419.29

Galvanised wire mesh of average width of aperture 1.4 mm sqm

and nominal dia. of wire 0.63 mm
Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No
12817 marked
Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No
Stainless steel screws 40 mm
Stainless steel screws 20 mm
LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

Add water charges @ 1% on

Add C.P & OH @15% on

3453.48
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1838.66
Rs 1838.65

Item Code: 9.27.1.2.3

P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors,
windows etc - 35 mm thick - Stainles steel butt hinges - Kiln seasoned selected class sesham wood.

Code

Description

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

MATERIALS:
Sesham wood :
Styles 4x200x9.5x3.5 cm = 0.026 cum +
Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum +
Lock and bottom rails:
2 x 110.5 x 19.7x3.5 cm = 0.0152 cum +
Beading
(2x.312+2X150)x1.2x1.2 cm = 0.001 cum
Total = 0.0464 cum
Add for wastage @ 10% = 0.005 cum

DSR-12

Page 244 of 2298

1200
2204
2504

7029
8220
8218
8211
8214
0111
0112
0114
0130
9999

Grand Total : 0.0514 cum or 51.4 cudm

Kiln seasoned selected sheesum wood planks
Carraige of Timber
Kiln seasoning of timber
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

Cum
cum
cum

0.0514
0.0514
0.0514

65000.00
100.11
680.00

1.41

230.00

6.00

230.00

2.00

125.00

100 N
100 N

48.00
8.00

195.00
95.00

Day
Day
Day
Day
L.S.

1.30
0.90
1.05
0.105
33.80

301.00
273.00
247.00
301.00
1.49
Total:
4947.92

Galvanised wire mesh of average width of aperture 1.4 mm sqm

and nominal dia. of wire 0.63 mm
Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No
12817 marked
Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No
Stainless steel screws 40 mm
Stainless steel screws 20 mm
LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

Add water charges @ 1% on

Add C.P & OH @15% on

4997.40
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2660.65
Rs 2660.65

Item Code: 9.27.2.1.1

P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors,
windows etc - 30 mm thick - M.S. pressed butt hinges - Second class teak wood

Code

Description

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

MATERIALS:
Teak wood (2nd class)
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum
Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum.
Total = 0.040 cum+
Add for wastage @ 10% = 0.004 cum.
Total = 0.44 cum. Say 44 cudm
1190
2204

Second class teak wood in planks

Carraige of Timber
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

7029

Galvanised wire mesh of average width of aperture 1.4 mm sqm

and nominal dia. of wire 0.63 mm
Bright finished or black enameled mild steel butt hinges 10 No
100x58x1.90 mm

0595

DSR-12

cum
cum

0.044
0.044

72000.00
100.11

1.41

230.00

6.00

80.00

Page 245 of 2298

0597
0637

Bright finished or black enameled mild steel butt hinges 10 No

50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm
100 N

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

0111
0112
0114
0130
9999

LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

Day
Day
Day
Day
L.S.

2.00

45.00

48.00

50.00

8.00

25.00

1.20
0.80
1.00
0.10
33.80

301.00
273.00
247.00
301.00
1.49
Total:
4486.76

Add water charges @ 1% on

Add C.P & OH @15% on

4531.63
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2412.67
Rs 2412.70

Item Code: 9.27.2.1.2

P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors,
windows etc - 30 mm thick - M.S. pressed butt hinges - Kiln seasoned Chemically treated hollock wood.

Code

Description

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

MATERIALS:
Hollock wood :
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum
Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum.
Total = 0.040 cum+
Add for wastage @ 10% = 0.004 cum.
Total = 0.44 cum. Say 44 cudm
2505
2204
2504
9999

Hollock wood in planks

Carraige of Timber
Kiln seasoning of timber
Chemical treatment
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

cum
cum
cum
L.S.

0.044
0.044
0.044
9.10

35000.00
100.11
680.00
1.49

7029

sqm

1.41

230.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Galvanised wire mesh of average width of aperture 1.4 mm

and nominal dia. of wire 0.63 mm
Bright finished or black enameled mild steel butt hinges
100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges
50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0111
0112

LABOUR:
Carpenter 1st class
Carpenter 2nd class

Day
Day

1.20
0.80

301.00
273.00

0595
0597

DSR-12

Page 246 of 2298

0114
0130
9999

Beldar
Mistry
Sundries

Day
Day
L.S.

1.00
0.10
33.80

Add water charges @ 1% on

247.00
301.00
1.49
Total:
2902.24

Add C.P & OH @15% on

2931.26
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1560.63
Rs 1560.65

Item Code: 9.27.2.1.3

P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors,
windows etc - 30 mm thick - M.S. pressed butt hinges - Kiln seasoned selected class of sesham wood.

Code

Details of Cost for : 2.16 Sqm

Unit
Quantity

Description

Rate

MATERIALS:
Kiln seasoned selected class of sesham wood.
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum
Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum.
Total = 0.040 cum+
Add for wastage @ 10% = 0.004 cum.
Total = 0.44 cum. Say 44 cudm
1200
2204
2504

Kiln seasoned selected sheesum wood planks

Carraige of Timber
Kiln seasoning of timber
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

Cum
cum
cum

0.044
0.044
0.044

65000.00
100.11
680.00

7029

sqm

1.41

230.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Galvanised wire mesh of average width of aperture 1.4 mm

and nominal dia. of wire 0.63 mm
Bright finished or black enameled mild steel butt hinges
100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges
50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0111
0112
0114
0130
9999

LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

Day
Day
Day
Day
L.S.

1.20
0.80
1.00
0.10
33.80

301.00
273.00
247.00
301.00
1.49
Total:
4208.68

0595
0597

Add water charges @ 1% on

Add C.P & OH @15% on

4250.77
Cost for 2.16 Sqm
Rate per One Sqm:

DSR-12

Rs 2263.14

Page 247 of 2298

Rate as per DSR-12:

Rs 2263.15

Item Code: 9.27.2.2.1

P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors,
windows etc - 30 mm thick - Stainles steel hinges - Second class teak wood

Code

Description

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

MATERIALS:
Teak wood (2nd class)
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum
Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum.
Total = 0.040 cum+
Add for wastage @ 10% = 0.004 cum.
Total = 0.44 cum. Say 44 cudm
1190
2204

Second class teak wood in planks

Carraige of Timber
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

7029

Galvanised wire mesh of average width of aperture 1.4 mm sqm

and nominal dia. of wire 0.63 mm
Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No
12817 marked
Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No

8220
8218
8211
8214
0111
0112
0114
0130
9999

Stainless steel screws 40 mm

Stainless steel screws 20 mm
LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

cum
cum

0.044
0.044

72000.00
100.11

1.41

230.00

6.00

230.00

2.00

125.00

100 N
100 N

48.00
8.00

195.00
95.00

Day
Day
Day
Day
L.S.

1.20
0.80
1.00
0.10
33.80

301.00
273.00
247.00
301.00
1.49
Total:
4667.96

Add water charges @ 1% on

Add C.P & OH @15% on

4714.64
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2510.11
Rs 2510.10

Item Code: 9.27.2.2.2

P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors,
windows etc - 30 mm thick - Stainles steel hinges - Kiln seasoned Chemically treated hollock wood.

Code

Description

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

MATERIALS:
Hollock wood :
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+

DSR-12

Page 248 of 2298

Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum

Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum.
Total = 0.040 cum+
Add for wastage @ 10% = 0.004 cum.
Total = 0.44 cum. Say 44 cudm
2505
2204
2504
9999

Hollock wood in planks

Carraige of Timber
Kiln seasoning of timber
Chemical treatment
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

7029

Galvanised wire mesh of average width of aperture 1.4 mm sqm

and nominal dia. of wire 0.63 mm
Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No
12817 marked
Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No

8220
8218
8211
8214
0111
0112
0114
0130
9999

Stainless steel screws 40 mm

Stainless steel screws 20 mm
LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

cum
cum
cum
L.S.

0.044
0.044
0.044
8.97

35000.00
100.11
680.00
1.49

1.41

230.00

6.00

230.00

2.00

125.00

100 N
100 N

48.00
8.00

195.00
95.00

Day
Day
Day
Day
L.S.

1.20
0.80
1.00
0.10
33.80

301.00
273.00
247.00
301.00
1.49
Total:
3083.25

Add water charges @ 1% on

Add C.P & OH @15% on

3114.08
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1657.96
Rs 1657.95

Item Code: 9.27.2.2.3

P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors,
windows etc - 30 mm thick - Stainles steel - Kiln seasoned selected class of sesham wood.

Code

Description

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

MATERIALS:
Kiln seasoned selected class of sesham wood.
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum
Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum.
Total = 0.040 cum+
Add for wastage @ 10% = 0.004 cum.
Total = 0.44 cum. Say 44 cudm
1200
2204
2504

DSR-12

Kiln seasoned selected sheesum wood planks

Carraige of Timber
Kiln seasoning of timber
Wire guage - 2x160x40 cm = 1.28 sqm

Cum
cum
cum

0.044
0.044
0.044

65000.00
100.11
680.00

Page 249 of 2298

Add wastage @ 10% = 0.13 sqm

Total = 1.41 sqm
7029
8220
8218
8211
8214
0111
0112
0114
0130
9999

Galvanised wire mesh of average width of aperture 1.4 mm sqm

and nominal dia. of wire 0.63 mm
Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No
12817 marked
Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No
Stainless steel screws 40 mm
Stainless steel screws 20 mm
LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

1.41

230.00

6.00

230.00

2.00

125.00

100 N
100 N

48.00
8.00

195.00
95.00

Day
Day
Day
Day
L.S.

1.20
0.80
1.00
0.10
33.80

301.00
273.00
247.00
301.00
1.49
Total:
4389.88

Add water charges @ 1% on

Add C.P & OH @15% on

4433.78
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2360.58
Rs 2360.60

Item Code: 9.31.1

P/F wire gauze laminated veneer lumber shutters using galvanised wire gauze for doors, windows 35 mm thick
Details of Cost for : 2.38 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost of one shutter
220xl08cm = 2.38sqm.
MATERIALS:
7154
Factory made shutters LVL syles, rails and panels of sqm
2.38
1630.00
galvanised wire gauge
9999
Carriage of shutters
L.S.
29.64
1.49
Fittings :
0595
Black enamelled M.S. Butt hinges-100x58x1.9mm
10 No
6.00
80.00
0597
Black enamelled M.S. Butt hinges-50x37x 1.5
10 No
2.00
45.00
0637
M.S. Screws 40mm
100 N
48.00
50.00
0640
M.S. Screws 20mm
100 N
8.00
25.00
LABOUR:
0156
Carpenter Average
Day
0.52
287.00
0114
Beldar
Day
0.60
247.00
9999
Sundries
L.S.
35.88
1.49
Total:
Add water charges @ 1% on
4357.46
Add C.P & OH @15% on
4401.03
Cost for 2.38 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2126.55
Rs 2126.55

Item Code: 9.31.2

P/F wire gauze laminated veneer lumber shutters using galvanised wire gauze for doors, windows 30 mm thick
Details of Cost for : 2.38 Sqm
Code
Description
Unit
Quantity
Rate

DSR-12

Page 250 of 2298

7155
9999
0595
0597
0637
0640
0156
0114
9999

Details of cost of one shutter

220xl08cm = 2.38sqm.
MATERIALS:
Factory made shutters LVL syles, rails and panels of sqm
galvanised wire gauge
Carriage of shutters
L.S.
Fittings:
Black enamelled M.S. Butt hinges-100x5 8x1.9mm
10 No
Black enamelled M.S. Butt hinges-50x37xl.5
10 No
M.S. Screws 40mm
100 N
M.S. Screws 20mm
100 N
LABOUR:
Carpenter Average
Day
Beldar
Day
Sundries
L.S.

2.38

1385.00

29.64

1.49

6.00
2.00
48.00
8.00

80.00
45.00
50.00
25.00

0.52
0.60
35.88

287.00
247.00
1.49
Total:
3774.36

Add water charges @ 1% on

Add C.P & OH @15% on

3812.10
Cost for 2.38 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1841.98
Rs 1842.00

Item Code: 9.32

Providing 50x50x50mm 2nd class teak wood plugs fixing in CM 1:3
Code

Details of Cost for : 100.00 Nos

Unit
Quantity

Description

Rate

MATERIALS:
Teak wood (2nd class) 100x(50x50x50)mm =
0.0125cum
Add wastage @ 10% = 0.0013 cum.
Total =0.0138 cum.
Say 14 cudm.
1189
2204
03.003

Second class teak wood in scantling

Carraige of Timber
Cement mortar 1:3 (1 cement : 3 fine sand)
Labour :

cum
cum
Cum

0.014
0.014
0.002

64000.00
100.11
3631.93

0112
0124
0114

Carpenter II class
Mason II class
Beldar

Day
Day
Day

0.75
0.75
0.75

273.00
273.00
247.00
Total:
1499.41

Add water charges @ 1% on

Add C.P & OH @15% on

1514.40
Cost for 100.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 17.42
Rs 17.40

Item Code: 9.33.1

P/F expandable fastners of specified size with plastic sleeves 25 mm long
Code

Description

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

Details of cost of 10 nos.

MATERIALS:

DSR-12

Page 251 of 2298

7312
9999

Expandable fastner 25 mm long with plastic sleeve and M.S. each

screws
Labour for drilling holes and making good etc. and sundries
L.S.

10.00

8.00

20.80

1.49

Add water charges @ 1% on

Total:
110.99

Add C.P & OH @15% on

112.10
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 12.89
Rs 12.90

Item Code: 9.33.2

P/F expandable fastners of specified size with plastic sleeves 32 mm long
Code

7313
9999

Details of Cost for : 10.00 Nos

Unit
Quantity

Description

Details of cost of 10 nos.

MATERIALS:
Expandable fastner 32 mm long with plastic sleeve and M.S. each
screws
Labour for drilling holes and making good etc. and sundries
L.S.

Rate

10.00

9.00

26.00

1.49

Add water charges @ 1% on

Total:
128.74

Add C.P & OH @15% on

130.03
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 14.95
Rs 14.95

Item Code: 9.33.3

P/F expandable fastners of specified size with plastic sleeves 40 mm long
Code

7314
9999

Details of Cost for : 10.00 Nos

Unit
Quantity

Description

Details of cost of 10 nos.

MATERIALS:
Expandable fastner 40 mm long with plastic sleeve and M.S. each
screws
Labour for drilling holes and making good etc.
L.S.

Rate

10.00

12.00

26.00

1.49
Total:
158.74

Add water charges @ 1% on

Add C.P & OH @15% on

160.33
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 18.44
Rs 18.45

Item Code: 9.33.4

P/F expandable fastners of specified size with plastic sleeves 50 mm long
Code

Description

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

Details of cost of 10 nos.

MATERIALS:

DSR-12

Page 252 of 2298

7315
9999

Expandable fastner 50 mm long with plastic sleeve and M.S. each

screws
Labour for drilling holes and making good etc. and sundries
L.S.

10.00

14.00

26.00

1.49

Add water charges @ 1% on

Total:
178.74

Add C.P & OH @15% on

180.53
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 20.76
Rs 20.75

Item Code: 9.34.1

P/F 2nd class teak wood plain lining tongued and grooved on and including wooden plugs 40 mm thick
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
Teak wood (2nd class) 10x0.04m = 0.40cum+
Add wastage @ 10% = 0.04 cum.
= 0.44 cum.
Say 440 cudm.
1190
Teak wood (2nd class)
cum
0.44
72000.00
1231
Extra for selected planks
cum
0.44
11500.00
Second class teak wood plugs including cutting brick work and
fixing in cement mortar
1:3 (1 cement: 3 fine sand)
09.032
Providing 50x50x50mm 2nd class teak wood plugs fixing in
55.00
17.42
CM 1:3
13.050.01 Applying priming coat : With ready mixed pink or Grey primer
10.00
25.83
(hard and soft wood)
2204
Carriage of timber
cum
0.44
100.11
LABOUR:
For planning and fixing
0111
Carpenter 1st class
Day
2.15
301.00
0114
Beldar
Day
1.62
247.00
9999
Sundries & screws etc.
L.S.
53.82
1.49
Total:
Add water charges @ 1% except on [A]+[B] i.e on
37911.53
Add C.P & OH @15% except on [A]+[B] i.e on
38290.65
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 4525.07
Rs 4525.00

Item Code: 9.34.2

P/F 2nd class teak wood plain lining tongued and grooved on and including wooden plugs 25 mm thick.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 10 sqm.
MATERIALS:
Teak wood 2nd class 10x0.025 = 0.25cum+
Add wastage @ 10% = 0.025 cum. = 0.275 cum.
Say 275 cudm.
1190
Teak wood (2nd class)
cum
0.275
72000.00
1231
Extra for selected planks of second class teakwood
cum
0.275
11500.00
2204
Carriage of timber
cum
0.275
100.11

DSR-12

Page 253 of 2298

Second class teak wood plugs including cutting brick work and
fixing in cement mortar 1:3 (1 cement: 3 fine sand)
09.032
13.050.01

0111
0114
9999

Providing 50x50x50mm 2nd class teak wood plugs fixing in

CM 1:3
Applying priming coat : With ready mixed pink or Grey primer
(hard and soft wood)
LABOUR:
Carpenter 1 st class
Day
Beldar
Day
Sundries & screws etc.
L.S.

55.00

17.42

10.00

25.83

2.15
1.62
53.82

301.00
247.00
1.49
Total:
24117.51

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

24358.69
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2922.89
Rs 2922.80

Item Code: 9.34.3

P/F 2nd class teak wood plain lining tongued and grooved on and including wooden plugs 20 mm thick
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
Teak wood (2nd class) 10x0.02m = 0.20cum.+
Add wastage @ 10% = 0.02 cum.
= 0.22 cum. Say 220 cudm.
1190
Teak wood (2nd class)
cum
0.22
72000.00
1231
Extra for selected planks
cum
0.22
11500.00
2204
Carriage of timber
cum
0.22
100.11
Second class teak wood plugs including cutting brick work and
fixing in cement mortar
1:3 (1 cement: 3 fine sand)
09.032
Providing 50x50x50mm 2nd class teak wood plugs fixing in
55.00
17.42
CM 1:3
13.050.01 Applying priming coat : With ready mixed pink or Grey primer
10.00
25.83
(hard and soft wood)
LABOUR:
0111
Carpenter 1 st class
Day
1.08
301.00
0112
Carpenter 2nd class
Day
0.80
273.00
0114
Beldar
Day
1.08
247.00
9999
Sundries & screws etc.
L.S.
53.82
1.49
Total:
Add water charges @ 1% except on [A]+[B] i.e on
19282.45
Add C.P & OH @15% except on [A]+[B] i.e on
19475.27
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2361.30
Rs 2361.20

Item Code: 9.34.4

P/F 2nd class teak wood plain lining tongued and grooved on and including wooden plugs 12 mm thick
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Details of cost for 10 sqm.
Wood-Second class teak wood 10x0.012 = 0.12

DSR-12

Rate

Page 254 of 2298

1190
1231
2204

09.032

0111
0112
0114
13.050.01
9999

cum+
Add wastage @ 10% = 0.012 cum.
= 0.132 cum.
Say 132 cudm.
Second class teak wood
cum
Extra for selected planks
cum
Carriage of timber
cum
Second class teak wood plugs including cutting brick work and
fixing in cement mortar 1:3 (1 cement: 3 fine sand)
Providing 50x50x50mm 2nd class teak wood plugs fixing in
CM 1:3
LABOUR:
Carpenter 1 st class
Carpenter 2nd class
Beldar
Applying priming coat : With ready mixed pink or Grey primer
(hard and soft wood)
Sundries & screws etc.

0.132
0.132
0.132

72000.00
11500.00
100.11

55.00

17.42

Day
Day
Day

1.08
0.80
1.08
10.00

301.00
273.00
247.00
25.83

L.S.

53.82

1.49
Total:
11925.64

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

12044.90
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1506.80
Rs 1506.70

Item Code: 9.35.1

P/F wall lining flat pressed 3 layer and graded (medium density) particle board prelaminated one side decorative lamination on
other side balancing lamination grade I, T-II 12 mm thick

Code

7477
9999
9999
13.050.01

0112
0114
7048

Description
Details of cost for 10 sqm.
MATERIALSParticle board (three layer medium density)
12mm thick = 10 sqm.+
Add wastage @ 10% = 1 sqm.
= 11 sqm.
Particle board (three layer medium density)
Carriage of particle board
Sundries and screws
Priming coat
Applying priming coat : With ready mixed pink or Grey primer
(hard and soft wood)
LABOUR:
Carpenter 2nd class
Beldar
Rawl plug 50 mm (designation 10 no)

Details of Cost for : 10.00 Sqm

Unit
Quantity

sqm
L.S.
L.S.

Day
Day
each

Rate

11.00
13.52
26.91

690.00
1.49
1.49

10.00

25.83

1.28
1.43
55.00

273.00
247.00
10.00
Total:
8902.89

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

8991.92
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 1059.90
Rs 1059.90

Page 255 of 2298

Item Code: 9.35.2

P/F wall lining flat pressed 3 layer and graded (medium density) particle board prelaminated one side decorative lamination on
other side balancing lamination grade I, T-II 18 mm thick

Code

7478
9999
9999
13.050.01

0112
0114
7048

Description
Details of cost for 10 sqm.
MATERIALSParticle board (three layer medium density)
18 mm thick = 10 sqm.+
Add wastage @ 10% = 1 sqm.
= 11 sqm.
Particle board (three layer medium density)
Carriage of particle board
Sundries and screws
Priming coat
Applying priming coat : With ready mixed pink or Grey primer
(hard and soft wood)
LABOUR:
Carpenter 2nd class
Beldar
Rawl plug 50 mm (designation 10 no)

Details of Cost for : 10.00 Sqm

Unit
Quantity

sqm
L.S.
L.S.

Day
Day
each

Rate

11.00
13.52
26.91

810.00
1.49
1.49

10.00

25.83

1.28
1.43
55.00

273.00
247.00
10.00
Total:
10222.89

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

10325.12
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1213.22
Rs 1213.25

Item Code: 9.35.3

P/F wall lining flat pressed 3 layer and graded (medium density) particle board prelaminated one side decorative lamination on
other side balancing lamination grade I, T-II 25 mm thick

Code

7479
9999
9999
13.050.01

0112
0114
7048

DSR-12

Description
Details of cost for 10 sqm.
MATERIALSParticle board (three layer medium density)
25 mm thick = 10 sqm.+
Add wastage @ 10% = 1 sqm.
= 11 sqm.
Prelaminated particle board with one side decorative and
other side balancing lamination,
Carriage of particle board
Sundries and screws
Priming coat
Applying priming coat : With ready mixed pink or Grey primer
(hard and soft wood)
LABOUR:
Carpenter 2nd class
Beldar
Rawl plug 50 mm (designation 10 no)

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

sqm

11.00

880.00

L.S.
L.S.

13.52
26.91

1.49
1.49

10.00

25.83

1.28
1.43
55.00

Add water charges @ 1% except on [A] i.e on

273.00
247.00
10.00
Total:
10992.89

Add C.P & OH @15% except on [A] i.e on

11102.82

Day
Day
each

Page 256 of 2298

Cost for 10.00 Sqm

Rate per One Sqm:
Rate as per DSR-12:

Rs 1302.65
Rs 1302.65

Item Code: 9.36.1

P/F specified wood frame work consisting of battens 50x25mm fixed with rawlplug & drilling Hollock wood.
Details of Cost for : 0.03125 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for 5 no. battens of size
500cmx50mmx25mm (31.25 cudm)
MATERIALSHollock wood- 5x5.00x0.50x0.025 = 0.03125 cum+
Add wastage @ 5% = 0.00156 cum.
= 0.03281 cum.
Say 33 cudm.
2505
Hollock wood
cum
0.033
35000.00
2204
Carriage of timber
cum
0.033
100.11
LABOUR:
0111
Carpenter 1 st class
Day
1.00
301.00
0114
Beldar
Day
0.25
247.00
9999
Sundries
L.S.
6.76
1.49
Painting with ready mixed priming coat on ground 5x500x15
cm =3.75 sqm
13.050.01 Applying priming coat : With ready mixed pink or Grey primer
3.75
25.83
(hard and soft wood)
7048
Rawl plug 50 mm (designation 10 no)
each
55.00
10.00
9999
Labour for drilling holes steel tape sundries
L.S.
71.50
1.49
Total:
Add water charges @ 1% except on [A] i.e on
2187.66
Add C.P & OH @15% except on [A] i.e on
2209.54
Cost for 0.03125 Cum
Rate per One Cum:
Rs 84410.56
Rate as per DSR-12:
Rs 84413.10
(Diff due to rounding off in sub-item rate)
Item Code: 9.37.1
P/F 4 mm thick plywood plain lining with necessary screws:- Decorative veneer facings of approved manufacture.

Code

0759
9999

09.032

0111
0114
0130
9999

DSR-12

Details of Cost for : 10.00 Sqm

Description
Unit
Quantity
Details of cost for 10 sqm.
MATERIALSTeak ply wood = 10sqm.+
Add for wastage @ 20% = 2 sqm.
= 12 sqm.
teak ply wood
sqm
12.00
Carriage of ply wood
L.S.
5.46
Wooden plugs including cutting brick work and fixing in
cement mortar
Providing 50x50x50mm 2nd class teak wood plugs fixing in
55.00
CM 1:3
LABOURCarpenter 1st class
Day
3.80
Beldar
Day
4.60
Mistry
Day
0.60
20mm nails without head for fixing ply
L.S.
53.82

Rate

400.00
1.49

17.42

301.00
247.00
301.00
1.49

Page 257 of 2298

13.050.01

Painting with ready mixed priming coat

Applying priming coat : With ready mixed pink or Grey primer
(hard and soft wood)

10.00

25.83

Add water charges @ 1% except on [A]+[B] i.e on

Total:
7348.93

Add C.P & OH @15% except on [A]+[B] i.e on

7422.42
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 975.22
Rs 975.15

Item Code: 9.38

P/F 4 mm thick coir veneer board, ISI marked IS:14842 -2000, plain lining.
Code

7552
9999

09.032

0111
0114
0130
9999
13.050.01

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALSCoir veneered board 4mm thick = 10sqm.+
Add for wastage @ 20% = 2 sqm. = 12 sqm.
Coir veneered board 4mm thick
Carriage of Coir veneered board
Wooden plugs including cutting brick work and fixing in
cement mortar
Providing 50x50x50mm 2nd class teak wood plugs fixing in
CM 1:3
LABOURCarpenter 1st class
Beldar
Mistry
20mm nails without head for fixing ply
Painting with ready mixed priming coat
Applying priming coat : With ready mixed pink or Grey primer
(hard and soft wood)

sqm
L.S.

Rate

12.00
5.46

272.00
1.49

55.00

17.42

3.80
4.60
0.60
53.82

301.00
247.00
301.00
1.49

10.00

25.83

Add water charges @ 1% except on [A]+[B] i.e on

Total:
5812.93

Day
Day
Day
L.S.

Add C.P & OH @15% except on [A]+[B] i.e on

5871.06
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 796.81
Rs 796.70

Item Code: 9.39.1

P/F skirting of prelaminated with (one side decorative and other wide balancing laminat- ion) flat pressed,3 layer and graded
particle board (medium density) Grade I, Type II conforming to IS: 12823 :- 18 mm thick.

Code

7478
9999

DSR-12

Description
Details of cost for skirting 200mm wide and
30m long Area = 0.2x30= 6 sqm.
Area = 0.2x30= 6 sqm.
MATERIALSTeak shade prelaminated Particle board
(three layer medium density) = 6.0 sqm.+
Add wastage @ 10% = 0.6sqm.
= 6.6 sqm.
Particle board 18 mm thick
Carriage of particle board

Details of Cost for : 6.00 Sqm

Unit
Quantity

sqm
L.S.

6.60
8.11

Rate

810.00
1.49

Page 258 of 2298

7048
9999

0112
0114
9999
13.050.01

Rawl plug 50 mm (designation 10 no)

Labour for drilling holes
LABOUR:For dressing and fixing particle board to skirting
Carpenter 2nd class
Beldar
Sundries (Screws, sand paper)
Painting with ready mixed priming coat at back
Applying priming coat : With ready mixed pink or Grey primer
(hard and soft wood)

each
L.S.

102.00
130.00

10.00
1.49

Day
Day
L.S.

0.77
0.86
53.82

273.00
247.00
1.49

6.00

25.83

Add water charges @ 1% except on [A] i.e on

Total:
7074.60

Add C.P & OH @15% except on [A] i.e on

7145.35
Cost for 6.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1395.36
Rs 1395.40

Item Code: 9.39.2

P/F skirting of prelaminated with (one side decorative and other wide balancing laminat- ion) flat pressed,3 layer and graded
particle board (medium density) Grade I, Type II conforming to IS: 12823 :- 25 mm thick.

Code

7479
9999
7048
9999

0112
0114
9999
13.050.01

Description
Details of cost for skirting 200mm wide and
30m long Area = 0.2x30= 6 sqm.
Area = 0.2x30= 6 sqm.
MATERIALSTeak shade prelaminated Particle board
(three layer medium density) = 6.0 sqm.+
Add wastage @ 10% = 0.6sqm.
= 6.6 sqm.
Particle board 25 mm thick
Carriage of particle board
Rawl plug 50 mm (designation 10 no)
Labour for drilling holes
LABOUR:For dressing and fixing particle board to skirting
Carpenter 2nd class
Beldar
Sundries (Screws, sand paper)
Painting with ready mixed priming coat at back
Applying priming coat : With ready mixed pink or Grey primer
(hard and soft wood)

Details of Cost for : 6.00 Sqm

Unit
Quantity

Rate

sqm
L.S.
each
L.S.

6.60
8.11
102.00
130.00

880.00
1.49
10.00
1.49

Day
Day
L.S.

0.77
0.86
53.82

273.00
247.00
1.49

6.00

25.83

Add water charges @ 1% except on [A] i.e on

Total:
7536.60

Add C.P & OH @15% except on [A] i.e on

7611.97
Cost for 6.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1484.79
Rs 1484.80

Item Code: 9.40.1.1

P/F wooden moulded beading to door and window frames with iron screws, plugs :- 2nd class teak wood : 50 x 12 mm.
Details of Cost for : 5.00 m

DSR-12

Page 259 of 2298

Code

1190
2204
0637

13.050.01

0111

Description
Details of cost for beading for a window of size 140x110cm
i.e. 500cm long (5 metre)
MATERIALSTeak wood Ilnd class in planks
500x5x1.2cm = 0.003 cum+
Add for wastage @ 10% = 0.0003 cum.
= 0.0033 cum. Say 3.3 cudm.
Second class teak wood
Carriage of timber
Iron screws 40 mm
Painting with priming coat Area =
500(5+1.2+1.2) = 0.37 sqm
Applying priming coat : With ready mixed pink or Grey primer
(hard and soft wood)
LABOURFor plaining, fixing and making design
Carpenter 1st class

Unit

cum
cum
100 N

Day

Quantity

Rate

0.0033
0.0033
36.00

72000.00
100.11
50.00

0.37

25.83

0.53

301.00
Total:
415.46

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

419.61
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 98.42
Rs 98.40

Item Code: 9.40.1.2

P/F wooden moulded beading to door and window frames with iron screws, plugs :- 2nd class teak wood : 50 x 20 mm.

Code

1190
2204
0637

13.050.01

0111

Description
Details of cost for beading of a window of size
140x110cm i.e. 500cm. long (5metre)
MaterialsTeak wood Ilnd class in planks
500x5x2.0cm = 0.005cum+
Add for wastage @ 10% = 0.0005 cum.
= 0.0055 cum. Say 5.5 cudm.
Second class teak wood
Carriage of timber
Iron screws 40 mm
Painting with priming coat Area = 500(5+2+2)
= 0.45 sqm
Applying priming coat : With ready mixed pink or Grey primer
(hard and soft wood)
LabourFor plaining, fixing and making design
Carpenter 1 st class

Details of Cost for : 5.00 m

Unit
Quantity

cum
cum
100 N

Day

Rate

0.0055
0.0055
36.00

72000.00
100.11
50.00

0.45

25.83

0.53

301.00
Total:
574.08

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

579.82
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 135.68
Rs 135.70

Page 260 of 2298

Item Code: 9.40.2.1

P/F wooden moulded beading to door and window frames with iron screws, plugs :- Hollock wood : 50 x 12 mm.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
Details of cost for beading for a window of size 140x110cm
i.e. 500cm long (5 metre)
MATERIALSHollock wood
500x5x1.2cm = 0.003 cum+
Add for wastage @ 10% = 0.0003 cum.
= 0.0033 cum. Say 3.3 cudm.
2505
Hollock wood
cum
0.0033
35000.00
2204
Carriage of timber
cum
0.0033
100.11
0637
Iron screws 40 mm
100 N
36.00
50.00
Painting with priming coat Area =
500(5+1.2+1.2) = 0.37 sqm
13.050.01 Applying priming coat : With ready mixed pink or Grey primer
0.37
25.83
(hard and soft wood)
LABOURFor plaining, fixing and making design
0111
Carpenter 1 st class
Day
0.53
301.00
Total:
Add water charges @ 1% except on [A] i.e on
293.36
Add C.P & OH @15% except on [A] i.e on
296.29
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 70.06
Rs 70.05

Item Code: 9.40.2.2

P/F wooden moulded beading to door and window frames with iron screws, plugs :- Hollock wood : 50 x 20 mm.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
Details of cost for beading for a window of size 140x110cm
i.e. 500cm long (5 metre)
MATERIALSHollock wood
500x5x200cm = 0.005 cum+
Add for wastage @ 10% = 0.0005 cum.
= 0.0055 cum. Say 5.5 cudm.
2505
Hollock wood
cum
0.0055
35000.00
2204
Carriage of timber
cum
0.0055
100.11
0637
Iron screws 40 mm
100 N
36.00
50.00
Painting with priming coat Area = 500(5+2+2)
= 0.45 sqm
13.050.01 Applying priming coat : With ready mixed pink or Grey primer
0.45
25.83
(hard and soft wood)
LABOURFor plaining, fixing and making design
0111
Carpenter 1 st class
Day
0.53
301.00
Total:
Add water charges @ 1% except on [A] i.e on
370.58
Add C.P & OH @15% except on [A] i.e on
374.29
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 88.41
Rs 88.40

Page 261 of 2298

Item Code: 9.41.1

P/F plain jaffri of 35 x 10 mm laths placed 35mm apart(frames to be paid separately) i/c fixing 50 x 12mm beading :- Second
class teak wood._x000D_
Details of Cost for : 2.20 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost of a jaffri 200x110cm =2.2sqm
MATERIALSTeakwood Ilnd class
Jaffri 210x120x1.0cm = 0.025cum.+
Beading 660x5x1.2cm = 0.004cum.
= 0.029 cum.+
Add wastage @ 10% = 0.003 cum.
= 0.032 cum. Say 32 cudm.
1190
Second class teak wood in planks
cum
0.032
72000.00
2204
Carriage of timber
cum
0.032
100.11
LABOUR0111
Carpenter 1 st class
Day
0.75
301.00
0112
Carpenter 2nd class
Day
1.00
273.00
0114
Beldar
Day
0.50
247.00
0130
Mistry
Day
0.10
301.00
9999
Sundries
L.S.
33.80
1.49
Total:
Add water charges @ 1% on
3009.91
Add C.P & OH @15% on
3040.01
Cost for 2.20 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1589.10
Rs 1589.10

Item Code: 9.42

P/F 18mm thick 150mm wide pelmet of flat pressed 3 layer top cover with 6mm commercial plywood, MS nickel pipe 20mm dia

7055

Details of Cost for : 2.00 m

Description
Unit
Quantity
Details of cost for a pelmet 2m long
MATERIALS(i) 18mm thick particle board (medium density exterior grade) sqm
0.32

390.00

2412

Front-1x1.7x0.15=0.255sqm.+
Sides-2xO. 15x0.15= 0.045sqm.
= 0.300sqm.+
Add wastage @5% = 0.015sqm.
= 0.315sqm. Say 0.32 sqm.
6mm thick commercial ply wood
Top-lxl.7x0.15= 0.255sqm.+
Add wastage @ 5% = 0.013 sqm.
= 0.268 sqm. Say 0.27 sqm.
Ply wood 5 ply with commercial ply on both faces 6 mm thick sqm

0.27

340.00

1.65
2.00
0.52
8.06
0.00032
2.00

67.00
6.00
1.49
1.49
35000.00
10.00

Code

7034
7035
9999
9999
2505
7048

DSR-12

Nickle plated M.S. pipe 20 mm dia.

Nickle plated M.S. Brackets for curtain rod 20 each mm
Carriage of material
M.S. flat 25x3mm and 10cm long over brackets
Hollock wood in planks
Rawl plug 50 mm (designation 10 no)
LABOUR-

metre
each
L.S.
L.S.
cum
each

Rate

Page 262 of 2298

0112
0114
0130
9999

Carpenter 2nd class

Beldar
Mistry
Sundries

Day
Day
Day
L.S.

0.18
0.18
0.11
2.73

Add water charges @ 1% on

273.00
247.00
301.00
1.49
Total:
513.91

Add C.P & OH @15% on

519.05
Cost for 2.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 298.46
Rs 298.45

Item Code: 9.43

P/F 18mm thick, 150mm wide pelmet of Coir veneer board i/c top cover of 6mm coir veneer board, nickle plated MS pipe 20 mm
dia curtain rod, nickel plated brackets
Details of Cost for : 2.00 m
Code
Description
Unit
Quantity
Rate
Details of cost for a pelmet 2m long
MATERIALS(i) 18mm thick Coir veneered board
Front-1 x 1.7x0.15= 0.255sqm.+
Sides-2xO. 15x0.15= 0.045sqm.
= 0.300sqm.+
Add wastage @5% = 0.015sqm.
= 0.315sqm. Say 0.32 sqm.
7556
Coir veneered board 18mm thick
sqm
0.32
950.00
6mm thick commercial ply wood
Top-1 x 1.7x0.15= 0.255sqm.+
Add wastage @ 5% = 0.013 sqm.
= 0.268 sqm. Say 0.27 sqm.
7553
Coir veneered board 6mm thick
sqm
0.27
367.00
7034
Nickle plated M.S. pipe 20 mm dia.
metre
1.65
67.00
7035
Nickle plated M.S. Brackets for curtain rod 20 mm
each
2.00
6.00
9999
Carriage of material
L.S.
0.52
1.49
9999
M.S. flat 25x3mm and 10cm long over brackets
L.S.
8.06
1.49
2505
Hollock wood in planks
cum
0.00032
35000.00
7048
Rawl plug 50 mm (designation 10 no)
each
2.00
10.00
LABOUR0112
Carpenter 2nd class
Day
0.18
273.00
0114
Beldar
Day
0.18
247.00
0130
Mistry
Day
0.11
301.00
9999
Sundries
L.S.
2.73
1.49
Total:
Add water charges @ 1% on
700.40
Add C.P & OH @15% on
707.40
Cost for 2.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 406.76
Rs 406.75

Item Code: 9.44.1

Extra for using veneered particle board Non-Decorative veneer both face
Code

DSR-12

Description
Details of cost for a pelmet 2m long
MATERIALS-

Details of Cost for : 2.00 m

Unit
Quantity

Rate

Page 263 of 2298

0347

(i) 18mm thick particle board (medium density

exterior grade)
Front-lxl.7x0.15= 0.255sqm.+
Sides-2xO. 15x0.15= 0.045sqm.
= 0.300sqm.+ Add wastage @5% = 0.015sqm.
= 0.315sqm. Say 0.32 sqm.
Extra cost for commercial veneering both

sqm

0.32

Add water charges @ 1% on

155.00
Total:
49.60

Add C.P & OH @15% on

50.10
Cost for 2.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 28.81
Rs 28.80

Item Code: 9.44.2

Extra for using veneered particle board particle board, decorative veneering on both face
Details of Cost for : 2.00 m
Code
Description
Unit
Quantity
Details of cost for a pelmet 2m long
MATERIALS(i) 18mm thick particle board (medium density
exterior grade)
Front-lxl.7x0.15= 0.255sqm.+
Sides-2xO. 15x0.15= 0.045sqm.
= 0.300sqm.+
Add wastage @5% = 0.015sqm.
= 0.315sqm. Say 0.32 sqm.
0348
Extra cost for prelaminated particle board with
sqm
0.32
teak finish both sides
Add water charges @ 1% on

Rate

455.00
Total:
145.60

Add C.P & OH @15% on

147.06
Cost for 2.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 84.56
Rs 84.55

Item Code: 9.45

P/F teak wood lipping of size 25 x 3 mm in pelmet
Code

7049
0112
0114

Description
Details of cost for 10 metre
MATERIALSLipping with teak wood 25x3 mm
LABOURCarpenter 2nd class
Beldar

Details of Cost for : 10.00 m

Unit
Quantity

metre
Day
Day

Rate

10.00

20.00

0.25
0.25

273.00
247.00
Total:
330.00

Add water charges @ 1% on

Add C.P & OH @15% on

333.30
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 38.33
Rs 38.35

Page 264 of 2298

Item Code: 9.46.1

P/F CP brass curtain rods 1.25mm thick, wooden plugs 12 mm diametre
Code

0590
7023
9999
9999

09.032
9999
9999

Details of Cost for : 2.00 m

Description
Unit
Quantity
Details of cost for 2m long
MATERIALSC.P. brass curtain rod 12 mm dia
metre
2.00
C.P. brass brackets
each
2.00
C.P. brass screws
L.S.
4.03
Carriage
L.S.
1.56
Wooden plugs including cutting brick work and fixing in
cement mortar 1:3 (1 cement: 3 fine sand)
Providing 50x50x50mm 2nd class teak wood plugs fixing in
2.00
CM 1:3
Labour
L.S.
2.73
Sundries
L.S.
1.56
Add water charges @ 1% except on [A] i.e on

Rate

180.00
7.00
1.49
1.49

17.42
1.49
1.49
Total:
388.71

Add C.P & OH @15% except on [A] i.e on

392.60
Cost for 2.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 243.17
Rs 243.15

Item Code: 9.46.2

P/F CP brass curtain rods 1.25mm thick, wooden plugs 20 mm diametre
Code

0591
7023
9999
9999

09.032
9999
9999

Details of Cost for : 2.00 m

Description
Unit
Quantity
Details of cost for 2m long
MATERIALSC.P. brass curtain rod 20 mm dia
metre
2.00
C.P. brass brackets
each
2.00
C.P. brass screws
L.S.
4.03
Carriage
L.S.
1.56
Wooden plugs including cutting brick work and fixing in
cement mortar 1:3 (1 cement: 3 fine sand)
Providing 50x50x50mm 2nd class teak wood plugs fixing in
2.00
CM 1:3
Labour
L.S.
2.73
Sundries
L.S.
1.56
Add water charges @ 1% except on [A] i.e on

Rate

250.00
7.00
1.49
1.49

17.42
1.49
1.49
Total:
528.71

Add C.P & OH @15% except on [A] i.e on

534.00
Cost for 2.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 324.47
Rs 324.45

Item Code: 9.46.3

P/F CP brass curtain rods 1.25mm thick, wooden plugs 25 mm diametre
Code

DSR-12

Description
Details of cost for 2m long
MATERIALS-

Details of Cost for : 2.00 m

Unit
Quantity

Rate

Page 265 of 2298

0592
7023
9999
9999

09.032
9999
9999

C.P. brass curtain rod 25 mm dia

metre
C.P. brass brackets
each
C.P. brass screws
L.S.
Carriage
L.S.
Wooden plugs including cutting brick work and fixing in
cement mortar 1:3 (1 cement: 3 fine sand)
Providing 50x50x50mm 2nd class teak wood plugs fixing in
CM 1:3
Labour
L.S.
Sundries
L.S.

2.00
2.00
4.03
1.56

330.00
7.00
1.49
1.49

2.00

17.42

2.73
1.56

1.49
1.49
Total:
688.71

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

695.60
Cost for 2.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 417.39
Rs 417.35

Item Code: 9.47.1

P/F nickel plated MS pipe curtain rods 20 mm dia (heavy type)
Code

7034
7035
9999
9999
7048
9999
9999

Description
Details of cost for 2m long.
MATERIALS :
Nickel plated M.S. pipe 20 mm dia.
(ii) Nickel plated M.S. bracket
(iii) Screws
(iv) Carriage
(v) Rawl plug 50 mm (designation 10 no)
(vi) Labour including fixing rawl plug
(vii) Sundries

Details of Cost for : 2.00 m

Unit
Quantity

metre
each
L.S.
L.S.
each
L.S.
L.S.

2.00
2.00
4.03
1.56
2.00
5.20
1.56

Add water charges @ 1% on

Rate

67.00
6.00
1.49
1.49
10.00
1.49
1.49
Total:
184.39

Add C.P & OH @15% on

186.23
Cost for 2.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 107.08
Rs 107.10

Item Code: 9.47.2

P/F nickel plated MS pipe curtain rods 25 mm dia (heavy type)
Code

7033
7036
9999
9999
7048
9999
9999

DSR-12

Description
Details of cost for 2m long.
MATERIALS:
Nickel plated M.S. pipe 25 mm dia.
(ii) Nickel plated M.S. bracket
(iv) Screws
(iv) Carriage
(v) Rawl plug 50 mm (designation 10 no)
(vi) Labour including fixing rawl plug
(vii) Sundries

Details of Cost for : 2.00 m

Unit
Quantity

metre
each
L.S.
L.S.
each
L.S.
L.S.

2.00
2.00
4.03
1.56
2.00
5.20
1.56

Rate

Add water charges @ 1% on

75.00
7.00
1.49
1.49
10.00
1.49
1.49
Total:
202.39

Add C.P & OH @15% on

204.41

Page 266 of 2298

Cost for 2.00 m

Rate per One Metre:
Rate as per DSR-12:

Rs 117.54
Rs 117.55

Item Code: 9.48.1

P/F MS grills of required pattern in frames of windows fixed by welding
Code

1003

1008
2205
9999
9999

13.050.03

0102
0114

Description
Details of cost for a grill 90x120cm =
1.08sqm.
MaterialM.S. bar 16mm diameter- 11x86cm = 9.46m.
@ 1.58kg/m= 14.95kg+
Add wastage @ 10% = 1.50kg.
= 16.45kg. Say 0.165 quintal
M.S.bar
M.S. flat 25x3.15mm
2xl20cm = 2.40m+
2x90cm= 1.80m+
lxl20cm= 1.20m+
2x15cm =
M.S. flat
Carraige of Steel 0.165 + 0.04 = 0.205 q =
Sundries
Welding charges
Priming coat :
Area = 1x0.91x1.20x1=1.08sqm

Details of Cost for : 18.54 Kg

Unit
Quantity

quint
quint
tonne
L.S.
L.S.

Applying priming coat : With ready mixed red oxide zinc Sqm
chromate primer on steel galvanise
LABOUR:
Blacksmith 1st class
Day
Beldar
Day

Rate

0.165
0.04
0.02
26.91
19.76

4000.00
4200.00
77.87
1.49
1.49

1.08

20.72

0.86
1.10

301.00
247.00
Total:
1429.66

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

1443.96
Cost for 18.54 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 90.77
Rs 90.75

Item Code: 9.48.2

P/F MS grills of required pattern in frames of windows Fixed to openings/wooden frames with rawl plugs screws etc

Code

Description

Details of Cost for : 18.54 Kg

Unit
Quantity

Rate

MATERIALS:
M.S. bar 16mm dia. 11x86cm = 9.46m.
@ 1.58kg/m= 14.95kg+
Add wastage @ 10% = 1.50kg.
= 16.45kg. Say 0.165quintal
1003

M.S. bar
quint

0.165

4000.00

M.S. flat 25x3.15mm

DSR-12

Page 267 of 2298

2xl20cm = 2.40m+
2x90cm= 1.80m+
lxl20cm= 1.20m+
2xl5cm = 0.30m
=5.70m
5.70m @ 0.63kg/m = 3.59kg+
Add wastage @ 10% = 0.36kg.
= 3.95kg. Say 4 kg. or 0.04 quintal
1008

M.S. flat

2205

Carriage of steel 0.165 + 0.04 = 0.205 q =

0.0205 tonne. Say 0.02 tonne

9999
9999

Sundries
Welding charges

quint

0.04

4200.00

tonne
L.S.

0.02
26.91

77.87
1.49

L.S.

19.76

1.49

Priming coat :
Area = 1x0.90x1.20x1 = 1.08sqm
13.050.03

Applying priming coat : With ready mixed red oxide zinc Sqm
chromate primer on steel galvanise
LABOUR :

1.08

20.72

0102
0114
7048
9999

Blacksmith 1st class

Beldar
Rawl plug 50 mm (designation 10 no.)
Fixing of rawl plugs

Day
Day
each

0.86
1.10
8.00

301.00
247.00
10.00

L.S.

26.00

1.49
Total:
1548.40

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

1563.88
Cost for 18.54 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 98.21
Rs 98.20

Item Code: 9.49

P/F expanded metal 20x60mm strands 3.2mm wide & 1.6mm thick for windows etc i/c 62x19mm beading of 2nd class teak wood

Code

1015
9999

13.050.03

DSR-12

Description
Details of cost for a window of size
140x110cm =1.54sqm.
MATERIALSExpended metal -20x60mm mesh 3.2mm wide
= 1.4x1.1m = 1.54sqm.+
Add wastage @ 10% = 0.15sqm.
= 1.69 sqm.
Expended metal -.
Carriage
Priming Coat :
Area = 1.40x1.10x1.00 =1.54sqm
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise
Second class teak wood beading
5mx62mmx19mm = 0.0059cum.+

Details of Cost for : 1.54 Sqm

Unit
Quantity

Rate

sqm
L.S.

1.69
1.82

270.00
1.49

Sqm

1.54

20.72

Page 268 of 2298

1190
2204
0112
0114
9999

Add wastage @ 10% = 0.00059cum.

= 0.00649cum. Say 6 cudm.
Second class teak wood
Carriage of timber
LABOURCarpenter 2nd class
Beldar
Sundries

cum
cum

0.006
0.006

72000.00
100.11

Day
Day
L.S.

0.33
0.25
26.91

273.00
247.00
1.49
Total:
1083.55

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

1094.39
Cost for 1.54 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 837.96
Rs 837.95

Item Code: 9.50

P/F hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75 kg per sqm to window frames etc. i/c 62 x 19mm
beading of IInd class teak wood.
Details of Cost for : 1.54 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for a window of size
140x110cm =1.54sqm.
MATERIALSHard drawn steel wire fabric -20x60mm mesh
3.2mm wide = 1.4x1.1m= 1.54sqm.+
Add wastage @ 10% = 0.15sqm.
= 1.69 sqm.
1021
Hard drawn steel wire fabric
sqm
1.69
430.00
9999
Carriage of wire fabric
L.S.
1.82
1.49
Priming Coat :
Area = 1.40x1.10x1.00 =1.54sqm
13.050.03 Applying priming coat : With ready mixed red oxide zinc Sqm
1.54
20.72
chromate primer on steel galvanise
Second class teak wood beading
5mx62mmx19mm = 0.00059cum.+
Add wastage @ 10% = 0.00059cum.
= 0.000649cum. Say 6 cudm.
1190
Second class teak wood
cum
0.006
72000.00
2204
Carriage of timber
cum
0.006
100.11
LABOUR0112
Carpenter 2nd class
Day
0.33
273.00
0114
Beldar
Day
0.25
247.00
9999
Sundries
L.S.
19.76
1.49
Total:
Add water charges @ 1% except on [A] i.e on
1343.29
Add C.P & OH @15% except on [A] i.e on
1356.72
Cost for 1.54 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1033.86
Rs 1033.85

Item Code: 9.51.1

P/F fly proof galvanised M.S. wire gauze to windows using galvanised M.S wire gauze with average width of aperture 1.4 mm of dia.
0.63 mm :- With 2nd class teak wood beading 62x19 mm.

DSR-12

Page 269 of 2298

Code

7029
9999

1190
2204
0112
0114
9999

Description
Details of cost for a window of size
140x110cm =1.54sqm.
MATERIALSWire gauge -20x60mm mesh 3.2mm wide =
1.4x1.1 m = 1.54sqm.+
Add wastage @ 10% = 0.15sqm.
= 1.69 sqm.
Wire gauge
Carriage of wire fabric
Second class teak wood beading
5mx62mmx19mm = 0.0059cum.+
Add wastage @ 10% = 0.00059cum.
= 0.00649cum. Say 6 cudm.
Second class teak wood
Carriage of timber
LABOURCarpenter 2nd class
Beldar
Sundries

Details of Cost for : 1.54 Sqm

Unit
Quantity

Rate

sqm
L.S.

1.69
1.82

230.00
1.49

cum
cum

0.006
0.006

72000.00
100.11

Day
Day
L.S.

0.33
0.25
19.76

273.00
247.00
1.49
Total:
1005.29

Add water charges @ 1% on

Add C.P & OH @15% on

1015.34
Cost for 1.54 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 758.21
Rs 758.20

Item Code: 9.51.2

P/F fly proof galvanised M.S. wire gauze to windows using galvanised M.S wire gauze with average width of aperture 1.4 mm of dia.
0.63 mm :- With 12 mm mild steel U beading.
Details of Cost for : 1.54 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for a window of size
140x110cm =1.54sqm.
MATERIALSWire gauge -20x60mm mesh 3.2mm wide =
1.4x1.1m = 1.54sqm.+
Add wastage @ 10% = 0.15sqm.
= 1.69 sqm.
7029
Wire gauge
sqm
1.69
230.00
9999
Carriage of wire fabric
L.S.
1.82
1.49
7349
12 mm mild steel U beading
metre
5.00
14.00
LABOUR0112
Carpenter 2nd class
Day
0.33
273.00
0114
Beldar
Day
0.25
247.00
9999
Sundries
L.S.
19.76
1.49
Total:
Add water charges @ 1% on
642.69
Add C.P & OH @15% on
649.12
Cost for 1.54 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 484.73
Rs 484.75

Page 270 of 2298

Item Code: 9.52

Deduct for fixing 75 x 25 mm hard drawn steel wire fabric of weight 7.75 Kg per sqm in panelled and glazed door and window
shutter instead of glass sheet 10 Kg/sqm (4 mm thick).
Details of Cost for : -1.00 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 1 sqm.
MATERIALS1021
Hard drawn steel wire fabric
sqm
1.00
430.00
2406
Glass 10 kg/sqm (4 mm)
sqm
-1.00
310.00
Total:
Add water charges @ 1% on
120.00
Add C.P & OH @15% on
121.20
Cost for -1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

-Rs 139.38
-Rs 139.40

Item Code: 9.53

P/F Flat iron hold fast i/c embedding in CC blocks
Code

1008
9999

04.002.05
9999
0103
0123
0114

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for 1 hold fast
MATERIALSM.S.flat 40x5mm 40cm long @ 1.68 kg/m =
quint
0.0067
0.672 kg = 0.0067 qunital
Carriage of steel
L.S.
1.82
Cement concrete 1:3:6
30xl0xl5cm= 0.0045cum.+
Add wastage @ 10% = 0.00045cum.
= 0.00495cum. Say 0.005cum.
P/L CC walls, columns, string courses, coping, bed blocks,
0.005
window sills etc. up to floor f
Bolts and nuts
L.S.
5.46
LABOURBlacksmith 2nd class
Day
0.03
Mason 1st class
Day
0.03
Beldar
Day
0.03
Add water charges @ 1% except on [A] i.e on

Rate

4200.00
1.49

4782.36
1.49
273.00
301.00
247.00
Total:
63.62

Add C.P & OH @15% except on [A] i.e on

64.26
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 97.81
Rs 96.75

Item Code: 9.54.1

Providing beams i/c hoisting, fixing in position & applying wood preservating for the unexposed surfaces, etc. complete with :- Sal
wood.
Details of Cost for : 0.203 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for a beam
450x30x15cm = 0.203cum. or203cudm.
MATERIALSSal wood = 203 cudm.+
Add wastage @ 2% = 4.06cudm.
= 207.06cudm. Say 207.1 cudm.

DSR-12

Page 271 of 2298

1199
2204
13.057.01

0112
0114
0100
9999

Sal wood
cum
Carriage of timber
cum
Priming coat (wood preservative)
Painting with oil type wood preservative : New work (two or
more coats).
LABOURCarpenter 2nd class
Day
Beldar
Day
Bandhani
Day
Sundries
L.S.

0.2071
0.207

50000.00
100.11

0.54

18.68

0.70
1.45
0.70
26.91

273.00
247.00
260.00
1.49
Total:
11147.07

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

11258.54
Cost for 0.203 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 63829.61
Rs 63829.70

Item Code: 9.54.2

Providing beams i/c hoisting, fixing in position & applying wood preservating for the unexposed surfaces, etc. complete with :Hollock wood.
Details of Cost for : 0.203 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for a beam
450x30x15cm = 0.203cum. or203cudm.
MATERIALSHollock wood = 203 cudm.+
Add wastage @ 2% = 4.06cudm.
= 207.06cudm. Say 207.1 cudm.
2466
Hollock wood
cum
0.2071
31000.00
2204
Carriage of timber
cum
0.207
100.11
Priming coat (wood preservative)
13.057.01 Painting with oil type wood preservative : New work (two or
0.54
18.68
more coats).
LABOUR0112
Carpenter 2nd class
Day
0.70
273.00
0114
Beldar
Day
1.45
247.00
0100
Bandhani
Day
0.70
260.00
9999
Sundries
L.S.
26.91
1.49
Total:
Add water charges @ 1% except on [A] i.e on
7212.17
Add C.P & OH @15% except on [A] i.e on
7284.29
Cost for 0.203 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 41315.37
Rs 41315.00

Item Code: 9.55.1

P/F M.S. pressed butt hinges bright finished with necessary screws etc. complete :- 125 x 65 x 2.12 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for ten
MATERIALS0594
Butt hinges 125x65x2.12 mm
10 No
10.00
0635
Iron screws 50 mm
100 N
80.00
9999
Carriage of materials
L.S.
2.73

DSR-12

Rate

130.00
60.00
1.49

Page 272 of 2298

0112
0114

LABOURCarpenter 2nd class

Beldar

Day
Day

0.14
0.09

Add water charges @ 1% on

273.00
247.00
Total:
242.52

Add C.P & OH @15% on

244.95
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 28.17
Rs 28.15

Item Code: 9.55.2

P/F M.S. pressed butt hinges bright finished with necessary screws etc. complete :- 100 x 58 x 1.90 mm._x000D_

0637

Details of Cost for : 10.00 Nos

Description
Unit
Quantity
Bright finished or black enameled mild steel butt hinges 10 No
10.00
100x58x1.90 mm
Bright finished or black enameled mild steel screws 40 mm
100 N
80.00

9999

Carriage of materials

Code
0595

Rate
80.00
50.00

Labour :
0112
0114

Carpenter 2nd class

Beldar

L.S.
Day
Day

2.73
0.14
0.09

Add water charges @ 1% on

1.49
273.00
247.00
Total:
184.52

Add C.P & OH @15% on

186.37
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 21.43
Rs 21.45

Item Code: 9.55.3

P/F M.S. pressed butt hinges bright finished with necessary screws etc. complete :- 75 x 47 x 1.70 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for ten
MATERIALS0596
Butt hinges 175x47x1.7 mm
10 No
10.00
0638
Iron screws 30 mm
100 N
60.00
9999
Carriage of materials
L.S.
1.82
LABOUR0112
Carpenter 2nd class
Day
0.14
0114
Beldar
Day
0.09
Add water charges @ 1% on

Rate

60.00
40.00
1.49
273.00
247.00
Total:
147.16

Add C.P & OH @15% on

148.63
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 17.09
Rs 17.10

Page 273 of 2298

Item Code: 9.55.4

P/F M.S. pressed butt hinges bright finished with necessary screws etc. complete :- 50 X 37 X 1.50 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for ten
MATERIALS0597
Butt hinges 50x37x1.5 mm
10 No
10.00
0640
Iron screws 20 mm
100 N
40.00
9999
Carriage of materials
L.S.
0.91
LABOUR0112
Carpenter 2nd class
Day
0.08
Add water charges @ 1% on

Rate

45.00
25.00
1.49
273.00
Total:
78.20

Add C.P & OH @15% on

78.98
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 9.08
Rs 9.10

Item Code: 9.56.1

P/F M.S. pressed parliamentary hinges bright finished with n/a screws etc. complete :- 125 x 90 x 4.00 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for ten
MATERIALS8222
M.S. heavy weight but hinges 125x90x4.0mm
10 No
10.00
IS: 1341 marked.
0635
Iron screws 50 mm
100 N
80.00
9999
Carriage of materials
L.S.
2.73
LABOUR0112
Carpenter 2nd class
Day
0.14
0114
Beldar
Day
0.09
Add water charges @ 1% on

Rate

320.00
60.00
1.49
273.00
247.00
Total:
432.52

Add C.P & OH @15% on

436.85
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 50.24
Rs 50.25

Item Code: 9.56.2

P/F M.S. pressed parliamentary hinges bright finished with n/a screws etc. complete :- 100 x 75 x 3.50 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for ten
MATERIALS8223
M.S. heavy weight butt hinges 100x75x3.5
10 No
10.00
mm IS: 1341 marked
0637
Iron screws 40 mm
100 N
80.00
9999
Carriage of materials
L.S.
2.73
LABOUR0112
Carpenter 2nd class
Day
0.14
0114
Beldar
Day
0.09
Add water charges @ 1% on

DSR-12

Rate

160.00
50.00
1.49
273.00
247.00
Total:
264.52

Page 274 of 2298

Add C.P & OH @15% on

267.17
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 30.73
Rs 30.70

Item Code: 9.56.3

P/F M.S. pressed parliamentary hinges bright finished with n/a screws etc. complete :- 75 x 60 x 3.10 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for ten
MATERIALS8224
M.S. heavy weight butt hinges 75x60x3.1 mm
10 No
10.00
IS: 1341 marked
0638
Iron screws 30 mm
100 N
60.00
9999
Carriage of materials
L.S.
1.82
LABOUR0112
Carpenter 2nd class
Day
0.14
0114
Beldar
Day
0.09
Add water charges @ 1% on

Rate

83.00
40.00
1.49
273.00
247.00
Total:
170.16

Add C.P & OH @15% on

171.86
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 19.76
Rs 19.75

Item Code: 9.56.4

P/F M.S. pressed parliamentary hinges bright finished with n/a screws etc. complete :- 50 x 40 x 2.50 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for ten
MATERIALS8225
M.S. heavy weight butt hinges 50x40x2.5 mm IS: 1341 marked 10 No
10.00

70.00

0640
9999

40.00
0.91

25.00
1.49

0.08

273.00
Total:
103.20

0112

Iron screws 20 mm
Carriage of materials
LABOURCarpenter 2nd class

100 N
L.S.
Day

Add water charges @ 1% on

Rate

Add C.P & OH @15% on

104.23
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 11.99
Rs 12.00

Item Code: 9.57.1

P/F oxidised M.S. pressed butt hinges with necessary screws etc. complete :- 125 x 65 x 2.12 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
MATERIALS0642
M.S. butt hinges (oxidised) 125x65x2.12 mm
10 No
10.00
0682
Iron screws (oxidised) 50 mm
100 N
80.00

DSR-12

Rate

130.00
70.00

Page 275 of 2298

9999
0112
0114

Carriage of materials
LABOURCarpenter II class
Beldar

L.S.

3.64

1.49

Day
Day

0.14
0.09

273.00
247.00
Total:
251.87

Add water charges @ 1% on

Add C.P & OH @15% on

254.39
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 29.26
Rs 29.25

Item Code: 9.57.2

P/F oxidised M.S. pressed butt hinges with necessary screws etc. complete :- 100 x 58 1.90 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
MATERIALS0643
M.S. butt hinges (oxidised) 100x58x1.9 mm
10 No
10.00
0683
Iron screws (oxidised) 40 mm
100 N
80.00
9999
Carriage of materials
L.S.
2.73
LABOUR0112
Carpenter II class
Day
0.14
0114
Beldar
Day
0.09
Add water charges @ 1% on

Rate

80.00
50.00
1.49
273.00
247.00
Total:
184.52

Add C.P & OH @15% on

186.37
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 21.43
Rs 21.45

Item Code: 9.57.3

P/F oxidised M.S. pressed butt hinges with necessary screws etc. complete :- 75 x 47 x 1.70 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
MATERIALS0644
M.S. butt hinges (oxidised) 75x47x1.7 mm
10 No
10.00
0684
Iron screws (oxidised) 30 mm
100 N
60.00
9999
Carriage of materials
L.S.
1.82
LABOUR0112
Carpenter II class
Day
0.14
0114
Beldar
Day
0.09
Add water charges @ 1% on

Rate

55.00
45.00
1.49
273.00
247.00
Total:
145.16

Add C.P & OH @15% on

146.61
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 16.86
Rs 16.85

Item Code: 9.57.4

P/F oxidised M.S. pressed butt hinges with necessary screws etc. complete :- 50 x 37 x 1.50 mm.

DSR-12

Page 276 of 2298

Code

0645
0686
9999
0112

Description
Details of cost for 10 nos.
MATERIALSM.S. butt hinges (oxidised) 50x37x1.5 mm
Iron screws (oxidised) 20 mm
Carriage of materials
LABOURCarpenter II class

Details of Cost for : 10.00 Nos

Unit
Quantity

10 No
100 N
L.S.
Day

Rate

10.00
40.00
0.91

45.00
30.00
1.49

0.08

273.00
Total:
80.20

Add water charges @ 1% on

Add C.P & OH @15% on

81.00
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 9.32
Rs 9.30

Item Code: 9.58.1

P/F oxidised MS pressed parli- amentary hinges with necessary screws etc. complete :- 150x125x27x2.80 mm
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Rate
Details of cost for 10 nos.
MATERIALS0646
M.S. parliamentary hinges (oxidised)
10 No
10.00
320.00
150x125x27x2.8 mm
0683
Iron screws (oxidised) 40 mm
100 N
80.00
50.00
9999
Carriage of materials
L.S.
2.73
1.49
LABOUR0112
Carpenter II class
Day
0.14
273.00
0114
Beldar
Day
0.14
247.00
Total:
Add water charges @ 1% on
436.87
Add C.P & OH @15% on
441.24
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 50.74
Rs 50.75

Item Code: 9.58.2

P/F oxidised MS pressed parli- amentary hinges with necessary screws etc. complete :- 125x125x27x2.80 mm
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Rate
Details of cost for 10 nos.
MATERIALS0647
M.S. parliamentary hinges (oxidised)
10 No
10.00
300.00
125x125x27x2.8 mm
0683
Iron screws (oxidised) 40 mm
100 N
80.00
50.00
9999
Carriage of materials
L.S.
2.73
1.49
LABOUR0112
Carpenter II class
Day
0.14
273.00
0114
Beldar
Day
0.14
247.00
Total:
Add water charges @ 1% on
416.87
Add C.P & OH @15% on
421.04
Cost for 10.00 Nos

DSR-12

Page 277 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 48.42
Rs 48.40

Item Code: 9.58.3

P/F oxidised MS pressed parli- amentary hinges with necessary screws etc. complete :- 100x125x27x2.80 mm
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Rate
Details of cost for 10 nos.
MATERIALS0648
M.S. parliamentary hinges (oxidised)
10 No
10.00
225.00
100x125x27x2.8 mm
0683
Iron screws (oxidised) 40 mm
100 N
80.00
50.00
9999
Carriage of materials
L.S.
2.73
1.49
LABOUR0112
Carpenter II class
Day
0.14
273.00
0114
Beldar
Day
0.14
247.00
Total:
Add water charges @ 1% on
341.87
Add C.P & OH @15% on
345.29
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 39.71
Rs 39.70

Item Code: 9.58.4

P/F oxidised MS pressed parli- amentary hinges with necessary screws etc. complete :- 75 x 100 x 20 x 2.24 mm.

Code

0649
0684
9999
0112
0114

Description
Details of cost for 10 nos.
MATERIALSM.S. parliamentary hinges (oxidised)
75x100x20x2.24 mm
Iron screws (oxidised) 30 mm
Carriage of materials
LABOURCarpenter 2nd class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

10 No

10.00

190.00

100 N
L.S.

60.00
2.73

45.00
1.49

0.14
0.14

273.00
247.00
Total:
293.87

Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

296.81
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 34.13
Rs 34.15

Item Code: 9.59.1

P/F oxidised M.S single acting spring hinges with necessary screws etc. complete :- 150 mm._x000D_
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
0650
Oxidised mild steel single acting spring hinges 150 mm
each
10.00
0682
Oxidised mild steel screws 50 mm
100 N
80.00
9999
Carriage of materials
L.S.
2.73

DSR-12

Rate
105.00
70.00
1.49

Page 278 of 2298

LABOUR :
0112
0114

Carpenter 2nd class

Beldar

Day
Day

0.40
0.20

Add water charges @ 1% on

273.00
247.00
Total:
1268.67

Add C.P & OH @15% on

1281.36
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 147.36
Rs 147.35

Item Code: 9.59.2

P/F oxidised M.S single acting spring hinges with necessary screws etc. complete :- 125 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
MATERIALS0651
M.S. single acting spring hinges (oxidised)
each
10.00
125 mm
0682
Iron screws (oxidised) 50 mm
100 N
80.00
9999
Carriage of materials
L.S.
2.73
LABOUR0112
Carpenter II class
Day
0.40
0114
Beldar
Day
0.20
Add water charges @ 1% on

Rate

100.00
70.00
1.49
273.00
247.00
Total:
1218.67

Add C.P & OH @15% on

1230.86
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 141.55
Rs 141.55

Item Code: 9.59.3

P/F oxidised M.S single acting spring hinges with necessary screws etc. complete :- 100 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
MATERIALS0652
M.S. single acting spring hinges (oxidised)
each
10.00
100 mm
0683
Iron screws (oxidised) 40 mm
100 N
80.00
9999
Carriage of materials
L.S.
2.73
LABOUR0112
Carpenter II class
Day
0.40
0114
Beldar
Day
0.20
Add water charges @ 1% on

Rate

80.00
50.00
1.49
273.00
247.00
Total:
1002.67

Add C.P & OH @15% on

1012.70
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 116.46
Rs 116.45

Page 279 of 2298

Item Code: 9.60.1

P/F oxidised M.S double acting spring hinges with necessary screws etc. complete :- 150 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
MATERIALS0653
M.S. double acting spring hinges (oxidised)
each
10.00
150 mm
0682
Iron screws (oxidised) 50 mm
100 N
80.00
9999
Carriage of materials
L.S.
2.73
LABOUR0112
Carpenter II class
Day
0.40
0114
Beldar
Day
0.20
Add water charges @ 1% on

Rate

110.00
70.00
1.49
273.00
247.00
Total:
1318.67

Add C.P & OH @15% on

1331.86
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 153.16
Rs 153.15

Item Code: 9.60.2

P/F oxidised M.S double acting spring hinges with necessary screws etc. complete :- 125 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
MATERIALS0654
M.S. double acting spring hinges (oxidised)
each
10.00
125 mm
0682
Iron screws (oxidised) 50 mm
100 N
80.00
9999
Carriage of materials
L.S.
2.73
LABOUR0112
Carpenter II class
Day
0.40
0114
Beldar
Day
0.20
Add water charges @ 1% on

Rate

105.00
70.00
1.49
273.00
247.00
Total:
1268.67

Add C.P & OH @15% on

1281.36
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 147.36
Rs 147.35

Item Code: 9.60.3

P/F oxidised M.S double acting spring hinges with necessary screws etc. complete :- 100 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
MATERIALS0655
M.S. double acting spring hinges (oxidised)
each
10.00
100 mm
0683
Iron screws (oxidised) 40 mm
100 N
80.00
9999
Carriage of materials
L.S.
2.73
LABOUR0112
Carpenter II class
Day
0.40
0114
Beldar
Day
0.20

DSR-12

Rate

85.00
50.00
1.49
273.00
247.00
Total:

Page 280 of 2298

Add water charges @ 1% on

1052.67

Add C.P & OH @15% on

1063.20
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 122.27
Rs 122.25

Item Code: 9.61.1

P/F M.S paino hinges . Overall width 35 mm.
Code

0656
0686
9999
0112
0114

Description
Details of cost for 1 meter
MATERIALSM.S. piano hinges (oxidised) 35 mm wide
Iron screws (oxidised) 20 mm
Carriage of materials
LABOURCarpenter II class
Beldar

Details of Cost for : 1.00 m

Unit
Quantity

metre
100 N
L.S.
Day
Day

Rate

1.00
30.00
1.82

40.00
30.00
1.49

0.14
0.09

273.00
247.00
Total:
112.16

Add water charges @ 1% on

Add C.P & OH @15% on

113.28
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 130.27
Rs 130.25

Item Code: 9.61.2

P/F M.S paino hinges . Overall width 50 mm.
Code

7485
0686
9999
0112
0114

Description
Details of cost for 1 meter
MATERIALSM.S. piano hinges (oxidised) 50 mm wide
Iron screws (oxidised) 20 mm
Carriage of materials
LABOURCarpenter II class
Beldar

Details of Cost for : 1.00 m

Unit
Quantity

metre
100 N
L.S.
Day
Day

Rate

1.00
30.00
1.82

39.00
30.00
1.49

0.14
0.09

273.00
247.00
Total:
111.16

Add water charges @ 1% on

Add C.P & OH @15% on

112.27
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 129.11
Rs 129.10

Item Code: 9.61.3

P/F M.S paino hinges . Overall width 65 mm.
Code

7486

DSR-12

Description
Details of cost for 1 meter
MATERIALSM.S. piano hinges (oxidised) 65 mm wide

Details of Cost for : 1.00 m

Unit
Quantity

metre

1.00

Rate

49.00

Page 281 of 2298

0686
9999
0112
0114

Iron screws (oxidised) 20 mm

Carriage of materials
LABOURCarpenter II class
Beldar

100 N
L.S.
Day
Day

30.00
1.82

30.00
1.49

0.14
0.09

273.00
247.00
Total:
121.16

Add water charges @ 1% on

Add C.P & OH @15% on

122.37
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 140.73
Rs 140.75

Item Code: 9.62.1

P/F oxidised M.S sliding door bolts :- 300 x 16 mm .
Code

0660
7040
0641
9999
0112

Description
Details of cost for 10 nos.
MATERIALSM.S. sliding door bolts (oxidised) 300x16 mm
Iron screws (oxidised) 35 mm
Bolts and nuts 50x6 mm
Carriage of materials & sundries
LABOURCarpenter II class

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
each
L.S.
Day

Rate

10.00
120.00
40.00
6.37

90.00
40.00
5.00
1.49

0.25

273.00
Total:
1225.74

Add water charges @ 1% on

Add C.P & OH @15% on

1238.00
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 142.37
Rs 142.35

Item Code: 9.62.2

P/F oxidised M.S sliding door bolts :- 250 x 16 mm .
Code

0661
7040
0641
9999
0112

Description
Details of cost for 10 nos.
MATERIALSM.S. sliding door bolts (oxidised) 250x16 mm
Iron screws (oxidised) 35 mm
Bolts and nuts 50x6 mm
Carriage of materials & sundries
LABOURCarpenter II class

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
each
L.S.
Day

Rate

10.00
100.00
40.00
6.37

80.00
40.00
5.00
1.49

0.25

273.00
Total:
1117.74

Add water charges @ 1% on

Add C.P & OH @15% on

1128.92
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 129.83
Rs 129.85

Item Code: 9.63.1

DSR-12

Page 282 of 2298

P/F oxidised M.S tower bolt :- 250 x 10 mm .

Code

0664
0684
9999
0112

Description
Details of cost for 10 nos.
MATERIALSM.S. tower bolts (oxidised) 250x10 mm
Iron screws (oxidised) 30 mm
Carriage of material
LABOURCarpenter II class

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
L.S.
Day

Rate

10.00
100.00
3.64

40.00
45.00
1.49

0.10

273.00
Total:
477.72

Add water charges @ 1% on

Add C.P & OH @15% on

482.50
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 55.49
Rs 55.50

Item Code: 9.63.2

P/F oxidised M.S tower bolt :- 200 x 10 mm .
Code

0665
0684
9999
0112

Description
Details of cost for 10 nos.
MATERIALSM.S. tower bolts (oxidised) 200x10 mm
Iron screws (oxidised) 30 mm
Carriage of material
LABOURCarpenter II class

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
L.S.
Day

Rate

10.00
80.00
2.73

35.00
45.00
1.49

0.10

273.00
Total:
417.37

Add water charges @ 1% on

Add C.P & OH @15% on

421.54
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 48.48
Rs 48.50

Item Code: 9.63.3

P/F oxidised M.S tower bolt :- 150 x 10 mm .
Code

0666
0684
9999
0112

Description
Details of cost for 10 nos.
MATERIALSM.S. tower bolts (oxidised) 150x10 mm
Iron screws (oxidised) 30 mm
Carriage of material
LABOURCarpenter II class

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
L.S.
Day

Rate

10.00
60.00
2.73

25.00
45.00
1.49

0.10

273.00
Total:
308.37

Add water charges @ 1% on

Add C.P & OH @15% on

311.45
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 35.82
Rs 35.80

Page 283 of 2298

Item Code: 9.63.4

P/F oxidised M.S tower bolt :- 100 x 10 mm .
Code

0667
0684
9999
0112

Description
Details of cost for 10 nos.
MATERIALSM.S. tower bolts (oxidised) 100 x 10 mm
Iron screws (oxidised) 30 mm
Carriage of material
LABOURCarpenter II class

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
L.S.
Day

Rate

10.00
60.00
2.73

20.00
45.00
1.49

0.08

273.00
Total:
252.91

Add water charges @ 1% on

Add C.P & OH @15% on

255.44
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 29.38
Rs 29.40

Item Code: 9.64

P / F ISI marked 85x 42 mm oxidised M.S. pull bolt lock
Code

2449
9999
0112

Details of Cost for : 10.00 Nos

Description
Unit
Quantity
Details of cost for 10 nos.
MATERIALSM.S. pull bolts (oxidised) of size 85x42 mm with bolts and each
10.00
nuts complete
Carriage of materials & sundries
L.S.
6.37
LABOURCarpenter II class
Day
0.25
Add water charges @ 1% on

Rate

44.00
1.49
273.00
Total:
517.74

Add C.P & OH @15% on

522.92
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 60.14
Rs 60.15

Item Code: 9.65.1

P/F oxidised M.S door latches conforming to IS : 5930 with screws etc. complete :- 300 x 20 x 6 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
MATERIALS0662
M.S. door latches (oxidised) 300x20x6 mm
each
10.00
0685
Iron screws (oxidised) 25 mm
100 N
90.00
9999
Carriage of materials
L.S.
3.64
LABOUR0112
Carpenter II class
Day
0.12
Add water charges @ 1% on

Rate

45.00
35.00
1.49
273.00
Total:
519.68

Add C.P & OH @15% on

524.88
Cost for 10.00 Nos

DSR-12

Page 284 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 60.36
Rs 60.35

Item Code: 9.65.2

P/F oxidised M.S door latches conforming to IS : 5930 with screws etc. complete :- 250 x 20 x 6 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
MATERIALS0663
M.S. door latches (oxidised) 250x20x6 mm
each
10.00
0685
Iron screws (oxidised) 25 mm
100 N
90.00
9999
Carriage of materials
L.S.
3.64
LABOUR0112
Carpenter II class
Day
0.12
Add water charges @ 1% on

Rate

40.00
35.00
1.49
273.00
Total:
469.68

Add C.P & OH @15% on

474.38
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 54.55
Rs 54.55

Item Code: 9.66.1

P/F oxidised M.S handles :- 125 mm .
Code

0668
0685
9999
0112

Description
Details of cost for 10 nos.
MATERIALSM.S. handle (oxidised) 125 mm
Iron screws (oxidised) 25 mm
Carriage of materials
LABOURCarpenter II class

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
L.S.
Day

Rate

10.00
40.00
2.73

17.00
35.00
1.49

0.06

273.00
Total:
204.45

Add water charges @ 1% on

Add C.P & OH @15% on

206.49
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 23.75
Rs 23.75

Item Code: 9.66.2

P/F oxidised M.S handles :- 100 mm .
Code

0669
0685
9999
0112

Description
Details of cost for 10 nos.
MATERIALSM.S. handle (oxidised) 100 mm
Iron screws (oxidised) 25 mm
Carriage of materials
LABOURCarpenter II class

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
L.S.
Day

10.00
40.00
1.82

15.00
35.00
1.49

0.06

273.00
Total:
183.09

Add water charges @ 1% on

DSR-12

Rate

Page 285 of 2298

Add C.P & OH @15% on

184.92
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 21.27
Rs 21.25

Item Code: 9.66.3

Code

0670
0685
9999
0112

Description
Details of cost for 10 nos.
MATERIALSM.S. handle (oxidised) 75 mm
Iron screws (oxidised) 25 mm
Carriage of materials
LABOURCarpenter II class

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
L.S.
Day

Rate

10.00
40.00
1.82

14.00
35.00
1.49

0.06

273.00
Total:
173.09

Add water charges @ 1% on

Add C.P & OH @15% on

174.82
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 20.10
Rs 20.10

Item Code: 9.67.1

P/F oxidised M.S. hasp and staple :- 150 mm .
Code

0679
0685
9999
0112

Description
Details of cost for 10 nos.
MATERIALSM.S. hasp and staple (safety type) (oxidised) 150 mm
Iron screws (oxidised) 25 mm
Carriage of materials
LABOURCarpenter II class

Details of Cost for : 10.00 Nos

Unit
Quantity

10 No
100 N
L.S.
Day

Rate

10.00
80.00
1.82

120.00
35.00
1.49

0.08

273.00
Total:
172.55

Add water charges @ 1% on

Add C.P & OH @15% on

174.28
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 20.04
Rs 20.05

Item Code: 9.67.2

P/F oxidised M.S. hasp and staple :- 115 mm .
Code

0680
0685
9999
0112

DSR-12

Description
Details of cost for 10 nos.
MATERIALSM.S. hasp and staple (safety type) (oxidised) 115 mm
Iron screws (oxidised) 25 mm
Carriage of materials
LABOURCarpenter II class

Details of Cost for : 10.00 Nos

Unit
Quantity

10 No
100 N
L.S.
Day

Rate

10.00
70.00
1.82

100.00
35.00
1.49

0.08

273.00

Page 286 of 2298

Add water charges @ 1% on

Total:
149.05

Add C.P & OH @15% on

150.54
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 17.31
Rs 17.30

Item Code: 9.67.3

P/F oxidised M.S. hasp and staple :- 90 mm.
Code

0681
0685
9999
0112

Description
Details of cost for 10 nos.
MATERIALSM.S. hasp and staple (safety type) (oxidised) 90 mm
Iron screws (oxidised) 25 mm
Carriage of materials
LABOURCarpenter II class

Details of Cost for : 10.00 Nos

Unit
Quantity

10 No
100 N
L.S.
Day

Rate

10.00
70.00
1.82

75.00
35.00
1.49

0.08

273.00
Total:
124.05

Add water charges @ 1% on

Add C.P & OH @15% on

125.29
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 14.41
Rs 14.40

Item Code: 9.68.1

P/F oxidised MS casement stays (straight peg type) with n/a screws etc. complete :- 300 mm weighing not less than 200 gms.

Code
7063
0684
9999
0112

Description
MATERIALSOxidised M.S. casement stay 300 mm
Screws 30 mm
Carriage of materials
LABOURCarpenter II class

Details of Cost for : 10.00 Nos

Unit
Quantity
each
100 N
L.S.
Day

Rate

10.00
40.00
0.91

21.00
45.00
1.49

0.10

273.00
Total:
256.66

Add water charges @ 1% on

Add C.P & OH @15% on

259.23
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 29.81
Rs 29.80

Item Code: 9.68.2

P/F oxidised MS casement stays (straight peg type) with n/a screws etc. complete :- 250 mm weighing not less than 150 gms.

Code

7064

DSR-12

Description
Details of cost for 10 nos.
MATERIALSOxidised M.S. casement stay 250 mm

Details of Cost for : 10.00 Nos

Unit
Quantity

each

10.00

Rate

18.00

Page 287 of 2298

0685
9999
0112

Screws 25 mm
Carriage of materials
LABOURCarpenter II class

100 N
L.S.
Day

40.00
0.91

35.00
1.49

0.10

273.00
Total:
222.66

Add water charges @ 1% on

Add C.P & OH @15% on

224.89
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 25.86
Rs 25.85

Item Code: 9.68.3

P/F oxidised MS casement stays (straight peg type) with n/a screws etc. complete :- 200 mm weighing not less than 120 gms.

Code

7065
0685
9999
0112

Description
Details of cost for 10 nos.
MATERIALSOxidised M.S. casement stay 200 mm
Screws 25 mm
Carriage of materials
LABOURCarpenter II class

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
L.S.
Day

Rate

10.00
40.00
0.91

17.00
35.00
1.49

0.10

273.00
Total:
212.66

Add water charges @ 1% on

Add C.P & OH @15% on

214.79
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 24.70
Rs 24.70

Item Code: 9.69

Code

7184
0685
9999
0112

Description
Details of cost for 10 nos.
MATERIALSOxidised M.S. safety chain
Iron screws 25 mm
Carriage of materials
LABOURCarpenter II class

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
L.S.
Day

Rate

10.00
60.00
0.91

60.00
35.00
1.49

0.10

273.00
Total:
649.66

Add water charges @ 1% on

Add C.P & OH @15% on

656.16
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 75.46
Rs 75.45

Item Code: 9.70.1

P/F Stainless steel butt hinges with stainless steel screws etc. complete : 125 x 64 x 1.90 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity

DSR-12

Rate

Page 288 of 2298

8215
8210
9999
0112
0114

Details of cost for 10 Nos

MATERIALSS.S. butt hinges 125x64x 1.9 mm
Stainless steel screws 50 mm
Carriage of materials
LABOURCarpenter 2nd class
Beldar

10 No
100 N
L.S.
Day
Day

10.00
80.00
2.73

240.00
240.00
1.49

0.14
0.09

273.00
247.00
Total:
496.52

Add water charges @ 1% on

Add C.P & OH @15% on

501.49
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 57.67
Rs 57.65

Item Code: 9.70.2

P/F Stainless steel butt hinges with stainless steel screws etc. complete : 100 x 58 x 1.90 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 Nos
MATERIALS8216
S.S. butt hinges 100x58x1.9 mm
10 No
10.00
8211
Stainless steel screws 40 mm
100 N
80.00
9999
Carriage of materials
L.S.
2.73
LABOUR0112
Carpenter 2nd class
Day
0.14
0114
Beldar
Day
0.09
Add water charges @ 1% on

Rate

215.00
195.00
1.49
273.00
247.00
Total:
435.52

Add C.P & OH @15% on

439.88
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 50.59
Rs 50.60

Item Code: 9.70.3

P/F Stainless steel butt hinges with stainless steel screws etc. complete : 75 x 47 x 1.80 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 Nos
MATERIALS8217
S.S. butt hinges 75x47x1.8 mm
10 No
10.00
8212
Stainless steel screws 30 mm
100 N
60.00
9999
Carriage of materials
L.S.
1.82
LABOUR0112
Carpenter 2nd class
Day
0.14
0114
Beldar
Day
0.09
Add water charges @ 1% on

Rate

145.00
145.00
1.49
273.00
247.00
Total:
295.16

Add C.P & OH @15% on

298.11
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 34.28
Rs 34.30

Page 289 of 2298

Item Code: 9.70.4

P/F Stainless steel butt hinges with stainless steel screws etc. complete : 50 x 37 x 1.50 mm.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 Nos
MATERIALS8218
S.S. butt hinges 50x37x1.5 mm
10 No
10.00
8214
Stainless steel screws 20 mm
100 N
40.00
9999
Carriage of materials
L.S.
0.91
LABOUR0112
Carpenter 2nd class
Day
0.08
Add water charges @ 1% on

Rate

125.00
95.00
1.49
273.00
Total:
186.20

Add C.P & OH @15% on

188.06
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 21.63
Rs 21.65

Item Code: 9.71.1

P/F Stainless steel butt hinges (Heavy weight) with stainless steel screws etc. complete : 125 x 64 x 2.50 mm.

Code

8219
8210
9999
0112
0114

Description
Details of cost for 10 Nos
MATERIALSS.S. butt hinges 125x64x2.5 mm
Stainless steel screws 50 mm
Carriage of materials
LABOURCarpenter 2nd class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

10 No
100 N
L.S.
Day
Day

Rate

10.00
80.00
2.73

320.00
240.00
1.49

0.14
0.09

273.00
247.00
Total:
576.52

Add water charges @ 1% on

Add C.P & OH @15% on

582.29
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 66.96
Rs 66.95

Item Code: 9.71.2

P/F Stainless steel butt hinges (Heavy weight) with stainless steel screws etc. complete : 100 x 60 x 2.50 mm.

Code

8220
8211
9999
0112
0114

DSR-12

Description
Details of cost for 10 Nos
MATERIAL
S.S. butt hinges 100x60x2.5 mm
Stainless steel screws 40 mm
Carriage of materials
LABOURCarpenter 2nd class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

10 No
100 N
L.S.
Day
Day

Rate

10.00
80.00
2.73

230.00
195.00
1.49

0.14
0.09

273.00
247.00
Total:

Page 290 of 2298

Add water charges @ 1% on

450.52

Add C.P & OH @15% on

455.03
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 52.33
Rs 52.35

Item Code: 9.71.3

P/F Stainless steel butt hinges (Heavy weight) with stainless steel screws etc. complete : 75 x 50 x 2.50 mm.

Code

8221
8212
9999
0112
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 Nos
MATERIALSS.S. butt hinges 75x50x2.5 mm
Stainless steel screws 30 mm
Carriage of materials
LABOURCarpenter 2nd class
Beldar

10 No
100 N
L.S.
Day
Day

Rate

10.00
60.00
1.82

195.00
145.00
1.49

0.14
0.09

273.00
247.00
Total:
345.16

Add water charges @ 1% on

Add C.P & OH @15% on

348.61
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 40.09
Rs 40.10

Item Code: 9.72.1

P/F bright finished brass butt hinges :- 125 x 85 x 5.5 mm (heavy type).
Code

0382
0449
9999
0111
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 nos.
MATERIALSBrass butt hinges 125x85x5.5 mm
Brass screws 50 mm
Carriage of material
LABOURCarpenter 1 st class
Beldar

10 No
100 N
L.S.
Day
Day

Rate

10.00
100.00
3.64

2900.00
200.00
1.49

0.14
0.10

301.00
247.00
Total:
3172.26

Add water charges @ 1% on

Add C.P & OH @15% on

3203.98
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 368.46
Rs 368.45

Item Code: 9.72.2

P/F bright finished brass butt hinges :- 125 x 70 x 4 mm (ordinary type).
Code

DSR-12

Description
Details of cost for 10 nos.
MATERIALS-

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

Page 291 of 2298

0378
0449
9999
0111
0114

Brass butt hinges 125x70x4 mm

Brass screws 50 mm
Carriage of material
LABOURCarpenter 1 st class
Beldar

10 No
100 N
L.S.
Day
Day

10.00
100.00
3.64

800.00
200.00
1.49

0.14
0.10

301.00
247.00
Total:
1072.26

Add water charges @ 1% on

Add C.P & OH @15% on

1082.98
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 124.54
Rs 124.55

Item Code: 9.72.3

P/F bright finished brass butt hinges :- 100 x 85 x 5.5 mm (heavy type).
Code

0383
0450
9999
0111
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 nos.
MaterialsBrass butt hinges 100x85x5.5 mm
Brass screws 40 mm
Carriage of material
LABOURCarpenter 1 st class
Beldar

10 No
100 N
L.S.
Day
Day

Rate

10.00
80.00
2.73

2600.00
160.00
1.49

0.14
0.10

301.00
247.00
Total:
2798.91

Add water charges @ 1% on

Add C.P & OH @15% on

2826.90
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 325.09
Rs 325.10

Item Code: 9.72.4

P/F bright finished brass butt hinges :- 100 x 70 x 4 mm (ordinary type).
Code

0379
0450
9999
0111
0114

Description
Details of cost for 10 nos.
MATERIALSBrass butt hinges 100x70x4 mm
Brass screws 40 mm
Carriage of material
LABOURCarpenter 1 st class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

10 No
100 N
L.S.
Day
Day

Rate

10.00
80.00
2.73

650.00
160.00
1.49

0.14
0.10

301.00
247.00
Total:
848.91

Add water charges @ 1% on

Add C.P & OH @15% on

857.40
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 98.60
Rs 98.60

Page 292 of 2298

Item Code: 9.72.5

P/F bright finished brass butt hinges :- 75 x 65 x 4 mm (heavy type).
Code

0384
0451
9999
0111
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 nos.
MATERIALSBrass butt hinges 75x65x4 mm
Brass screws 30 mm
Carriage of material
LABOURCarpenter 1st class
Beldar

10 No
100 N
L.S.
Day
Day

Rate

10.00
60.00
2.73

900.00
130.00
1.49

0.14
0.10

301.00
247.00
Total:
1048.91

Add water charges @ 1% on

Add C.P & OH @15% on

1059.40
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 121.83
Rs 121.85

Item Code: 9.72.6

P/F bright finished brass butt hinges :- 75 x 40 x 2.5 mm (ordinary type).
Code

0380
0451
9999
0111
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 nos.
MATERIALSBrass butt hinges 75x40x2.5 mm
Brass screws 30 mm
Carriage of material
LABOURCarpenter 1st class
Beldar

10 No
100 N
L.S.
Day
Day

Rate

10.00
60.00
2.73

400.00
130.00
1.49

0.14
0.10

301.00
247.00
Total:
548.91

Add water charges @ 1% on

Add C.P & OH @15% on

554.40
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 63.76
Rs 63.75

Item Code: 9.72.7

P/F bright finished brass butt hinges :- 50 x 40 x 2.5 mm (ordinary type).
Code

0381
0453
9999
0111

Description
Details of cost for 10 nos.
MATERIALSBrass butt hinges 50x40x2.5 mm
Brass screws 20 mm
Carriage of material
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity

10 No
100 N
L.S.
Day

Rate

10.00
40.00
1.82

175.00
80.00
1.49

0.08

301.00
Total:
233.79

Add water charges @ 1% on

Add C.P & OH @15% on

236.13
Cost for 10.00 Nos

DSR-12

Page 293 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 27.16
Rs 27.15

Item Code: 9.73.1

P/F bright finished brass parliamentary hinges :- 150 x 125 x 27 x 5 mm.
Code

0385
0450
9999
0111
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 nos.
MATERIALSParliamentary hinges l50xl25x27x5 mm
Brass screws 40 mm
Carriage of materials
LABOURCarpenter 1 st class
Beldar

10 No
100 N
L.S.
Day
Day

Rate

10.00
80.00
2.73

2600.00
160.00
1.49

0.14
0.14

301.00
247.00
Total:
2808.79

Add water charges @ 1% on

Add C.P & OH @15% on

2836.88
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 326.24
Rs 326.25

Item Code: 9.73.2

P/F bright finished brass parliamentary hinges :- 125 x 125 x 27 x 5 mm.
Code

0386
0450
9999
0111
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 nos.
MATERIALSParliamentary hinges 125x125x27x5 mm
Brass screws 40 mm
Carriage of materials
LABOURCarpenter 1 st class
Beldar

10 No
100 N
L.S.
Day
Day

Rate

10.00
80.00
2.73

2300.00
160.00
1.49

0.14
0.14

301.00
247.00
Total:
2508.79

Add water charges @ 1% on

Add C.P & OH @15% on

2533.88
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 291.40
Rs 291.40

Item Code: 9.73.3

P/F bright finished brass parliamentary hinges :- 100 x 125 x 27 x 5 mm.
Code
0387
0450
9999
0111
0114

DSR-12

Description
MATERIALSParliamentary hinges 100x125x27x5 mm
Brass screws 40 mm
Carriage of materials
LABOURCarpenter 1 st class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity
10 No
100 N
L.S.
Day
Day

Rate

10.00
80.00
2.73

2000.00
160.00
1.49

0.14
0.14

301.00
247.00

Page 294 of 2298

Add water charges @ 1% on

Total:
2208.79

Add C.P & OH @15% on

2230.88
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 256.55
Rs 256.55

Item Code: 9.73.4

P/F bright finished brass parliamentary hinges :- 75 x 100 x 20 x 3.2 mm.
Code

0388
0451
9999
0111
0114

Description
Details of cost for 10 nos.
MATERIALSParliamentary hinges 75x100x20x3.2 mm
Brass screws 30 mm
Carriage of materials
LABOURCarpenter 1 st class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

10 No
100 N
L.S.
Day
Day

Rate

10.00
60.00
2.73

1600.00
130.00
1.49

0.14
0.14

301.00
247.00
Total:
1758.79

Add water charges @ 1% on

Add C.P & OH @15% on

1776.38
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 204.28
Rs 204.30

Item Code: 9.74.1

P/F bright finished brass tower bolts :- 250 x 10 mm.
Code
0400
0451
9999
0111

Description
MATERIALSBrass barrel bolts 250x 10 mm
Brass screws 30 mm
Carriage of materials
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity
each
100 N
L.S.
Day

Rate

10.00
100.00
4.55

225.00
130.00
1.49

0.10

301.00
Total:
2416.88

Add water charges @ 1% on

Add C.P & OH @15% on

2441.05
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 280.72
Rs 280.70

Item Code: 9.74.2

P/F bright finished brass tower bolts :- 200 x 10 mm.
Code
0401
0451
9999

DSR-12

Description
MATERIALSBrass barrel bolts 200x10 mm
Brass screws 30 mm
Carriage of materials

Details of Cost for : 10.00 Nos

Unit
Quantity
each
100 N
L.S.

10.00
80.00
2.73

Rate
175.00
130.00
1.49

Page 295 of 2298

0111

LABOURCarpenter 1 st class

Day

0.10

Add water charges @ 1% on

301.00
Total:
1888.17

Add C.P & OH @15% on

1907.05
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 219.31
Rs 219.30

Item Code: 9.74.3

P/F bright finished brass tower bolts :- 150 x 10 mm.
Code
0402
0451
9999
0111

Description
MATERIALSBrass barrel bolts 150x10 mm
Brass screws 30 mm
Carriage of materials
LABOURCarpenter 1 st class

Details of Cost for : 10.00 Nos

Unit
Quantity
each
100 N
L.S.
Day

Rate

10.00
80.00
2.73

140.00
130.00
1.49

0.10

301.00
Total:
1538.17

Add water charges @ 1% on

Add C.P & OH @15% on

1553.55
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 178.66
Rs 178.65

Item Code: 9.74.4

P/F bright finished brass tower bolts :- 100 x 10 mm.
Code

0403
0451
9999
0111

Description
Details of cost for 10 nos.
MATERIALSBrass barrel bolts 100x10 mm
Brass screws 30 mm
Carriage of materials
LABOURCarpenter 1 st class

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
L.S.
Day

Rate

10.00
60.00
2.73

90.00
130.00
1.49

0.10

301.00
Total:
1012.17

Add water charges @ 1% on

Add C.P & OH @15% on

1022.29
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 117.56
Rs 117.55

Item Code: 9.75.1

P/F bright finished brass door latch :- 300 x 16 x 5 mm.
Code

0411

DSR-12

Description
Details of cost for 10 nos.
MATERIALSBrass door latch 300x16x5 mm

Details of Cost for : 10.00 Nos

Unit
Quantity

each

10.00

Rate

160.00

Page 296 of 2298

0452
9999
0111

Brass screws 25 mm
Carriage of materials
LABOURCarpenter 1 st class

100 N
L.S.
Day

90.00
3.64

95.00
1.49

0.12

301.00
Total:
1727.04

Add water charges @ 1% on

Add C.P & OH @15% on

1744.31
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 200.60
Rs 200.60

Item Code: 9.75.2

P/F bright finished brass door latch :- 250 x 16 x 5 mm.
Code
0412
0452
9999
0111

Description
MATERIALSBrass door latch 250x16x5 mm
Brass screws 25 mm
Carriage of materials
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity
each
100 N
L.S.
Day

Rate

10.00
90.00
3.64

150.00
95.00
1.49

0.12

301.00
Total:
1627.04

Add water charges @ 1% on

Add C.P & OH @15% on

1643.31
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 188.98
Rs 189.00

Item Code: 9.76

P/F bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles._x000D_
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
0413
100 mm mortice latch & lock with 6 levers
each
1.00
350.00
LABOUR :
0111
9999

Carpenter 1st class

Sundries (screws, carriage etc.)

Day

0.17

301.00

L.S.

3.64

1.49
Total:
406.59

Add water charges @ 1% on

Add C.P & OH @15% on

410.66
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 472.26
Rs 472.25

Item Code: 9.77

P/F bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity

DSR-12

Rate

Page 297 of 2298

0414
0111
9999

MATERIALS100 mm mortice latch

LABOURCarpenter 1st class
Sundries (screws, carriage etc.)

each

1.00

300.00

Day
L.S.

0.17
3.64

301.00
1.49
Total:
356.59

Add water charges @ 1% on

Add C.P & OH @15% on

360.16
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 414.18
Rs 414.20

Item Code: 9.78

P/F bright finished brass night latch.
Code
0438
0111
9999

Description
MATERIALSBrass night latch
LABOURCarpenter 1st class
Sundries (screws, carriage etc.)

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

1.00

450.00

Day
L.S.

0.17
3.64

301.00
1.49
Total:
506.59

Add water charges @ 1% on

Add C.P & OH @15% on

511.66
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 588.41
Rs 588.40

Item Code: 9.79.1

P/F special quality bright finished brass cupboard or ward robe locks with four levers :- 40 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS2451
40 mm lock
each
1.00
LABOUR0111
Carpenter 1 st class
Day
0.17
9999
Sundries & screws
L.S.
3.64
Add water charges @ 1% on

Rate
65.00
301.00
1.49
Total:
121.59

Add C.P & OH @15% on

122.81
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 141.23
Rs 141.25

Item Code: 9.79.2

P/F special quality bright finished brass cupboard or ward robe locks with four levers :- 50 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost for 1 No.
MATERIALS2452
50 mm lock
each
1.00

DSR-12

Rate

70.00

Page 298 of 2298

0111
9999

LABOURCarpenter 1st class

Sundries & screws

Day
L.S.

0.17
3.64

Add water charges @ 1% on

301.00
1.49
Total:
126.59

Add C.P & OH @15% on

127.86
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 147.04
Rs 147.05

Item Code: 9.79.3

P/F special quality bright finished brass cupboard or ward robe locks with four levers :- 65 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS2453
Brass cupboard lock 6 levers (best make of approved quality) each
1.00
65 mm size
LABOUR0111
Carpenter 1st class
Day
0.17
9999
Sundries & screws
L.S.
3.64
Add water charges @ 1% on

Rate
75.00

301.00
1.49
Total:
131.59

Add C.P & OH @15% on

132.91
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 152.85
Rs 152.85

Item Code: 9.79.4

P/F special quality bright finished brass cupboard or ward robe locks with four levers :- 75 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS2454
75 mm lock
each
1.00
LABOUR0111
Carpenter 1st class
Day
0.17
9999
Sundries & screws
L.S.
3.64
Add water charges @ 1% on

Rate
95.00
301.00
1.49
Total:
151.59

Add C.P & OH @15% on

153.11
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 176.08
Rs 176.10

Item Code: 9.80

P/F 50 mm bright finished brass cup board or wardrobe knob.
Code
0447
9999

DSR-12

Description
MATERIALSCupboard knob
Carriage of material
LABOUR-

Details of Cost for : 10.00 Nos

Unit
Quantity
each
L.S.

10.00
2.73

Rate
30.00
1.49

Page 299 of 2298

0111

Carpenter 1 st class

Day

0.14

Add water charges @ 1% on

301.00
Total:
346.21

Add C.P & OH @15% on

349.67
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 40.21
Rs 40.20

Item Code: 9.81.1

P/F bright finished brass handles :- 125 mm.
Code
0408
0452
9999
0111

Description
MATERIALSBright finished brass handles 125 mm
Brass screws 25 mm
Carriage of material
LABOURCarpenter 1 st class

Details of Cost for : 10.00 Nos

Unit
Quantity
each
100 N
L.S.
Day

Rate

10.00
40.00
2.73

140.00
95.00
1.49

0.06

301.00
Total:
1460.13

Add water charges @ 1% on

Add C.P & OH @15% on

1474.73
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 169.59
Rs 169.60

Item Code: 9.81.2

P/F bright finished brass handles :- 100 mm.
Code
0409
0452
9999
0111

Description
MATERIALSBright finished brass handles 100 mm
Brass screws 25 mm
Carriage of material
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity
each
100 N
L.S.
Day

Rate

10.00
40.00
0.91

125.00
95.00
1.49

0.06

301.00
Total:
1307.42

Add water charges @ 1% on

Add C.P & OH @15% on

1320.49
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 151.86
Rs 151.85

Item Code: 9.81.3

P/F bright finished brass handles :- 75 mm.

DSR-12

Code

Description

0410
0452
9999

MATERIALSBright finished brass handles 75 mm

Brass screws 25 mm
Carriage of material
LABOUR-

Details of Cost for : 10.00 Nos

Unit
Quantity
each
100 N
L.S.

10.00
40.00
0.91

Rate
95.00
95.00
1.49

Page 300 of 2298

0111

Carpenter 1 st class

Day

0.06

Add water charges @ 1% on

301.00
Total:
1007.42

Add C.P & OH @15% on

1017.49
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 117.01
Rs 117.00

Item Code: 9.82

P/F bright finished brass hanging type floor door stopper.
Code

2455
0452
9999
0111

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 hanging floor door stopper
MATERIALSBright finished brass floor door stopper
Brass screws 25 mm
Carriage of material
LABOURCarpenter 1st class

each
100 N
L.S.
Day

Rate

10.00
20.00
2.73

60.00
95.00
1.49

0.03

301.00
Total:
632.10

Add water charges @ 1% on

Add C.P & OH @15% on

638.42
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 73.42
Rs 73.40

Item Code: 9.83

P/F IS : 3564 marked Aluminium die cast tubular type universal hydraulic door closer complete. _x000D_
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Rate
MATERIALS:
2456
Hydraulic door closer - Aluminium die cast body - Universal each
10.00
535.00
type
0451
Brass screws 30mm
100 N
60.00
130.00
9999
Carriage of materials
L.S.
3.64
1.49
LABOUR :
0112
Carpenter II class
Day
1.00
273.00
Total:
Add water charges @ 1% on
5706.42
Add C.P & OH @15% on
5763.48
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 662.80
Rs 662.80

Item Code: 9.84

P/F IS : 3564 Aluminium extruded hydraulic door closer double speed.
Code
7060
0451

DSR-12

Description
MATERIALSHydraulic door closer
Brass screws 30 mm

Details of Cost for : 10.00 Nos

Unit
Quantity
each
100 N

10.00
60.00

Rate
810.00
130.00

Page 301 of 2298

9999
0112

Carriage of material
LABOURCarpenter 2nd class

L.S.

1.00

1.49

Day

1.00

273.00
Total:
8452.49

Add water charges @ 1% on

Add C.P & OH @15% on

8537.01
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 981.76
Rs 981.75

Item Code: 9.85

P/F bright finished brass casement window fastener.
Code
0423
0452
9999
0111

Description
MATERIALSBrass casement window fastner
Brass screws 25 mm
Carriage of material
LABOURCarpenter 1 st class

Details of Cost for : 10.00 Nos

Unit
Quantity
Each
100 N
L.S.
Day

Rate

10.00
40.00
0.91

45.00
95.00
1.49

0.10

301.00
Total:
519.46

Add water charges @ 1% on

Add C.P & OH @15% on

524.65
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 60.34
Rs 60.35

Item Code: 9.86.1

P/F bright finished brass casement stays :- 300 mm weighing not less than 330 gms.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
MATERIALS0424
Brass casement stayes 300 mm
each
10.00
0451
Brass screws 30 mm
100 N
40.00
9999
Carriage of material
L.S.
0.91
LABOUR0111
Carpenter 1 st class
Day
0.10
Add water charges @ 1% on

Rate
120.00
130.00
1.49
301.00
Total:
1283.46

Add C.P & OH @15% on

1296.29
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 149.07
Rs 149.05

Item Code: 9.86.2

P/F bright finished brass casement stays :- 250 mm weighing not less than 280 gms.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
Materials0425
Brass casement stayes 250 mm
each
10.00

DSR-12

Rate

100.00

Page 302 of 2298

0452
9999
0111

Brass screws 25 mm
Carriage of material
LabourCarpenter 1 st class

100 N
L.S.
Day

40.00
0.91

95.00
1.49

0.10

301.00
Total:
1069.46

Add water charges @ 1% on

Add C.P & OH @15% on

1080.15
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 124.22
Rs 124.20

Item Code: 9.86.3

P/F bright finished brass casement stays :- 200 mm weighing not less than 240 gms.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
MATERIALS0426
Brass casement stayes 200 mm
each
10.00
0452
Brass screws 25 mm
100 N
40.00
9999
Carriage of material
L.S.
0.91
LABOUR0111
Carpenter 1 st class
Day
0.10
Add water charges @ 1% on

Rate
90.00
95.00
1.49
301.00
Total:
969.46

Add C.P & OH @15% on

979.15
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 112.60
Rs 112.60

Item Code: 9.87.1

P/F bright finished brass hasp and staple :- 150 mm.
Code
0431
0452
9999
0111

Description
MATERIALSBrass Safety hasps & staples 150 mm
Brass screws 25 mm
Carriage of material
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity
10 No
100 N
L.S.
Day

Rate

10.00
80.00
1.82

700.00
95.00
1.49

0.08

301.00
Total:
802.79

Add water charges @ 1% on

Add C.P & OH @15% on

810.82
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 93.24
Rs 93.25

Item Code: 9.87.2

P/F bright finished brass hasp and staple :- 115 mm.

DSR-12

Code

Description

0432

MATERIALSBrass Safety hasps & staples 115 mm

Details of Cost for : 10.00 Nos

Unit
Quantity
10 No

10.00

Rate
600.00

Page 303 of 2298

0453
9999
0111

Brass screws 20 mm
Carriage of material
LABOURCarpenter 1st class

100 N
L.S.
Day

70.00
1.82

80.00
1.49

0.08

301.00
Total:
682.79

Add water charges @ 1% on

Add C.P & OH @15% on

689.62
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 79.31
Rs 79.30

Item Code: 9.87.3

P/F bright finished brass hasp and staple :- 90 mm.
Code
0433
0453
9999
0111

Description
MATERIALSBrass Safety hasps & staples 90 mm
Brass screws 20 mm
Carriage of material
LABOURCarpenter 1 st class

Details of Cost for : 10.00 Nos

Unit
Quantity
10 No
100 N
L.S.
Day

Rate

10.00
70.00
1.82

500.00
80.00
1.49

0.08

301.00
Total:
582.79

Add water charges @ 1% on

Add C.P & OH @15% on

588.62
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 67.69
Rs 67.70

Item Code: 9.88

P/F chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of handles with n/ascrews.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS0558
100 mm mortice latch & lock with 6 levers
each
1.00
500.00
LABOUR0111
Carpenter 1 st class
Day
0.17
301.00
9999
Sundries (screws, carriage etc.)
L.S.
3.64
1.49
Total:
Add water charges @ 1% on
556.59
Add C.P & OH @15% on
562.16
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 646.48
Rs 646.50

Item Code: 9.89

P/F chromium plated brass night latch.
Code
0583

DSR-12

Description
MATERIALSBrass night latch
LABOUR-

Details of Cost for : 1.00 No.

Unit
Quantity
each

1.00

Rate
500.00

Page 304 of 2298

0111
9999

Carpenter 1st class

Sundries (screws, carriage etc.)

Day
L.S.

0.17
3.64

Add water charges @ 1% on

301.00
1.49
Total:
556.59

Add C.P & OH @15% on

562.16
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 646.48
Rs 646.50

Item Code: 9.90.1

P/F special quality chromium plated brass cupboard locks with six levers :- Size 40 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS2468
40 mm lock
each
1.00
LABOUR0111
Carpenter 1st class
Day
0.17
9999
Sundries & screws
L.S.
3.64
Add water charges @ 1% on

Rate
62.00
301.00
1.49
Total:
118.59

Add C.P & OH @15% on

119.78
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 137.75
Rs 137.75

Item Code: 9.90.2

P/F special quality chromium plated brass cupboard locks with six levers :- Size 50 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS2469
50 mm lock
each
1.00
LABOUR0111
Carpenter 1st class
Day
0.17
9999
Sundries & screws
L.S.
3.64
Add water charges @ 1% on

Rate
70.00
301.00
1.49
Total:
126.59

Add C.P & OH @15% on

127.86
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 147.04
Rs 147.05

Item Code: 9.90.3

P/F special quality chromium plated brass cupboard locks with six levers :- Size 65 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS2470
65 mm lock
each
1.00
LABOUR0111
Carpenter 1 st class
Day
0.17
9999
Sundries & screws
L.S.
3.64

DSR-12

Rate
82.00
301.00
1.49
Total:

Page 305 of 2298

Add water charges @ 1% on

138.59

Add C.P & OH @15% on

139.98
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 160.98
Rs 161.00

Item Code: 9.90.4

P/F special quality chromium plated brass cupboard locks with six levers :- Size 75 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost for one
Materials2471
75 mm lock
each
1.00
Labour0111
Carpenter 1st class
Day
0.17
9999
Sundries & screws
L.S.
3.64
Add water charges @ 1% on

Rate

103.00
301.00
1.49
Total:
159.59

Add C.P & OH @15% on

161.19
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 185.37
Rs 185.35

Item Code: 9.91

P/F chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete :Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
MATERIALS0584
Cupboard knob
each
10.00
9999
Carriage of material
L.S.
2.73
LABOUR0111
Carpenter 1 st class
Day
0.14
Add water charges @ 1% on

Rate
45.00
1.49
301.00
Total:
496.21

Add C.P & OH @15% on

501.17
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 57.64
Rs 57.65

Item Code: 9.92.1

P/F chromium plated brass handles :- 125 mm.
Code
0555
0452
9999
0111

Description
MATERIALSChromium plated brass handles 125 mm
Brass screws 25 mm
Carriage of material
LABOURCarpenter 1 st class

Details of Cost for : 10.00 Nos

Unit
Quantity
Each
100 N
L.S.
Day

10.00
40.00
2.73

160.00
95.00
1.49

0.06

301.00
Total:
1660.13

Add water charges @ 1% on

DSR-12

Rate

Page 306 of 2298

Add C.P & OH @15% on

1676.73
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 192.82
Rs 192.80

Item Code: 9.92.2

P/F chromium plated brass handles :- 100 mm.
Code

0556
0452
9999
0111

Description
Details of cost for 10 nos.
MaterialsChromium plated brass handles 100 mm
Brass screws 25 mm
Carriage of material
LabourCarpenter 1 st class

Details of Cost for : 10.00 Nos

Unit
Quantity

Each
100 N
L.S.
Day

Rate

10.00
40.00
0.91

140.00
95.00
1.49

0.06

301.00
Total:
1457.42

Add water charges @ 1% on

Add C.P & OH @15% on

1471.99
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 169.28
Rs 169.30

Item Code: 9.92.3

P/F chromium plated brass handles :- 75 mm.
Code
0557
0452
9999
0111

Description
MATERIALSChromium plated brass handles 75 mm
Brass screws 25 mm
Carriage of material
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity
Each
100 N
L.S.
Day

Rate

10.00
40.00
0.91

120.00
95.00
1.49

0.06

301.00
Total:
1257.42

Add water charges @ 1% on

Add C.P & OH @15% on

1269.99
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 146.05
Rs 146.05

Item Code: 9.93

P/F chromium plated brass casement window fastener.
Code
0568
0588
9999
0111

DSR-12

Description
MATERIALSC.P. brass window fastner
C.P. brass screws 25 mm
Carriage of material
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity
each
100 N
L.S.
Day

Rate

10.00
40.00
0.91

90.00
115.00
1.49

0.10

301.00
Total:

Page 307 of 2298

Add water charges @ 1% on

977.46

Add C.P & OH @15% on

987.23
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 113.53
Rs 113.55

Item Code: 9.94.1

P/F chromium plated brass casement stays :- 300 mm weighing not less than 330 gms.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
MATERIAL S0569
C.P. brass casement stays 300 mm
each
10.00
0588
C.P. brass screws 25 mm
100 N
40.00
9999
Carriage of material
L.S.
0.91
LABOUR0111
Carpenter 1 st class
Day
0.10
Add water charges @ 1% on

Rate
140.00
115.00
1.49
301.00
Total:
1477.46

Add C.P & OH @15% on

1492.23
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 171.61
Rs 171.60

Item Code: 9.94.2

P/F chromium plated brass casement stays :- 250 mm weighing not less than 280 gms.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
MATERIALS0570
C.P. brass casement stays 250 mm
each
10.00
0588
C.P. brass screws 25 mm
100 N
40.00
9999
Carriage of material
L.S.
0.91
LABOUR0111
Carpenter 1st class
Day
0.10
Add water charges @ 1% on

Rate
120.00
115.00
1.49
301.00
Total:
1277.46

Add C.P & OH @15% on

1290.23
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 148.38
Rs 148.40

Item Code: 9.94.3

P/F chromium plated brass casement stays :- 200 mm weighing not less than 240 gms.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
Materials0571
C.P. brass casement stays 200 mm
each
10.00
0588
C.P. brass screws 25 mm
100 N
40.00
9999
Carriage of material
L.S.
0.91
Labour0111
Carpenter 1st class
Day
0.10

DSR-12

Rate

100.00
115.00
1.49
301.00

Page 308 of 2298

Add water charges @ 1% on

Total:
1077.46

Add C.P & OH @15% on

1088.23
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 125.15
Rs 125.15

Item Code: 9.95.1

P/F aluminium butt hinges :- 125 x 75 x 4 mm.
Code
0687
0585
9999
0111
0114

Description
MATERIALSAluminium butt hinges 125x75x4.00 mm
C.P.brass screws 50 mm
Carriage of materials
LABOURCarpenter 1st class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity
10 No
100 N
L.S.
Day
Day

Rate

10.00
100.00
3.64

550.00
230.00
1.49

0.14
0.09

301.00
247.00
Total:
849.79

Add water charges @ 1% on

Add C.P & OH @15% on

858.29
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 98.70
Rs 98.70

Item Code: 9.95.2

P/F aluminium butt hinges :- 125 x 63 x 4 mm.
Code
0688
0585
9999
0111
0114

Description
MATERIALSAluminium butt hinges 125x63x4.00 mm
C.P.brass screws 50 mm
Carriage of materials
LABOURCarpenter 1 st class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity
10 No
100 N
L.S.
Day
Day

Rate

10.00
100.00
3.64

510.00
230.00
1.49

0.14
0.09

301.00
247.00
Total:
809.79

Add water charges @ 1% on

Add C.P & OH @15% on

817.89
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 94.06
Rs 94.05

Item Code: 9.95.3

P/F aluminium butt hinges :- 100 x 75 x 4 mm.
Code
0689
0586
9999

DSR-12

Description
MATERIALSAluminium butt hinges 100x75x4.00 mm
C.P.brass screws 40 mm
Carriage of materials

Details of Cost for : 10.00 Nos

Unit
Quantity
10 No
100 N
L.S.

10.00
80.00
2.73

Rate
500.00
190.00
1.49

Page 309 of 2298

0111
0114

LABOURCarpenter 1 st class
Beldar

Day
Day

0.14
0.09

Add water charges @ 1% on

301.00
247.00
Total:
720.44

Add C.P & OH @15% on

727.64
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 83.68
Rs 83.70

Item Code: 9.95.4

P/F aluminium butt hinges :- 100 x 63 x 4 mm.
Code
0691
0586
9999
0111
0114

Description
MATERIALSAluminium butt hinges 100x63x4.00 mm
C.P.brass screws 40 mm
Carriage of materials
LABOURCarpenter 1st class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity
10 No
100 N
L.S.
Day
Day

Rate

10.00
80.00
2.73

490.00
190.00
1.49

0.14
0.09

301.00
247.00
Total:
710.44

Add water charges @ 1% on

Add C.P & OH @15% on

717.54
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 82.52
Rs 82.50

Item Code: 9.95.5

P/F aluminium butt hinges :- 100 x 63 x 3.2 mm.
Code
0690
0586
9999
0111
0114

Description
MATERIALSAluminium butt hingesl00x63x3.20 mm
C.P.brass screws 40 mm
Carriage of materials
LABOURCarpenter 1 st class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity
10 No
100 N
L.S.
Day
Day

Rate

10.00
80.00
2.73

480.00
190.00
1.49

0.14
0.09

301.00
247.00
Total:
700.44

Add water charges @ 1% on

Add C.P & OH @15% on

707.44
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 81.36
Rs 81.35

Item Code: 9.95.6

P/F aluminium butt hinges :- 75 x 63 x 4 mm.
Code

Description

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

MATERIALS-

DSR-12

Page 310 of 2298

0692
0587
9999
0111
0114

Aluminium butt hinges 75x63x4.00 mm

C.P.brass screws 30 mm
Carriage of materials
LABOURCarpenter 1st class
Beldar

10 No
100 N
L.S.
Day
Day

10.00
60.00
1.82

475.00
150.00
1.49

0.14
0.09

301.00
247.00
Total:
632.08

Add water charges @ 1% on

Add C.P & OH @15% on

638.40
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 73.42
Rs 73.40

Item Code: 9.95.7

P/F aluminium butt hinges :- 75 x 63 x 3.2 mm.
Code
0693
0587
9999
0111
0114

Description
MATERIALSAluminium butt hinges 75x63x3.20 mm
C.P.brass screws 30 mm
Carriage of materials
LABOURCarpenter 1st class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity
10 No
100 N
L.S.
Day
Day

Rate

10.00
60.00
1.82

450.00
150.00
1.49

0.14
0.09

301.00
247.00
Total:
607.08

Add water charges @ 1% on

Add C.P & OH @15% on

613.15
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 70.51
Rs 70.50

Item Code: 9.95.8

P/F aluminium butt hinges :- 75 x 45 x 3.2 mm.
Code
0694
0587
9999
0111
0114

Description
MATERIALSAluminium butt hinges 75x45x3.20 mm
C.P.brass screws 30 mm
Carriage of materials
LABOURCarpenter 1 st class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity
10 No
100 N
L.S.
Day
Day

Rate

10.00
60.00
1.82

390.00
150.00
1.49

0.14
0.09

301.00
247.00
Total:
547.08

Add water charges @ 1% on

Add C.P & OH @15% on

552.55
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 63.54
Rs 63.55

Item Code: 9.96.1

P/F anodised aluminium sliding door bolts :_x000D_

DSR-12

Page 311 of 2298

Code

Description

0696
0588
9999

MATERIALS:
Anodised Aluminium sliding door bolt 300x16 mm
Chromium plated Brass screws 25 mm
Carriage of materials

0111

LABOUR :
Carpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity
each
100 N

Rate

10.00
40.00

155.00
115.00

L.S.

5.46

1.49

Day

0.50

301.00
Total:
1754.64

Add water charges @ 1% on

Add C.P & OH @15% on

1772.19
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 203.80
Rs 203.80

Item Code: 9.96.2

P/F aluminium sliding door bolts with nuts and screws etc. complete : 250x16 mm
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
MATERIALS0697
Aluminium sliding bolt 250x16 mm
each
10.00
0588
C.P. brass screws 25 mm
100 N
40.00
9999
Carriage of materials
L.S.
5.46
LABOUR0111
Carpenter 1st class
Day
0.50
Add water charges @ 1% on

Rate
125.00
115.00
1.49
301.00
Total:
1454.64

Add C.P & OH @15% on

1469.19
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 168.96
Rs 168.95

Item Code: 9.97.1

P/F aluminium tower bolt anodised - 300x10mm_x000D_
Code
0698
0587
9999
0111

Description
MATERIALSAluminium tower bolt (barrel type)300x10
mm
C.P. brass screws 30 mm
Carriage of materials
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

10 No

10.00

700.00

100 N
L.S.

80.00
4.42

150.00
1.49

Day

0.125

301.00
Total:
864.22

Add water charges @ 1% on

Add C.P & OH @15% on

872.86
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 100.38
Rs 100.40

Page 312 of 2298

Item Code: 9.97.2

P/F anodised aluminium tower bolts : 250 x 10 mm .
Code
0699
0587
9999
0111

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
MATERIALSAluminium tower bolt (barrel type) 250x10
mm
C.P. brass screws 30 mm
Carriage of materials
LABOURCarpenter 1st class

Rate

10 No

10.00

580.00

100 N
L.S.

80.00
4.42

150.00
1.49

Day

0.125

301.00
Total:
744.22

Add water charges @ 1% on

Add C.P & OH @15% on

751.66
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 86.44
Rs 86.45

Item Code: 9.97.3

P/F anodised aluminium tower bolts : 200 x 10 mm ._x000D_
Code

Details of Cost for : 10.00 Nos

Unit
Quantity

Description

0700

MATERIALS:
Anodised Aluminium tower bolt (barrel type)200x10 mm

0587
9999

Chromium plated Brass screws 30 mm

Carriage of materials

Rate

10 No

10.00

450.00

100 N

80.00

150.00

L.S.

2.73

1.49

Day

0.125

301.00
Total:
611.70

LABOUR :
0111

Carpenter 1st class

Add water charges @ 1% on

Add C.P & OH @15% on

617.82
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 71.05
Rs 71.05

Item Code: 9.97.4

P/F anodised aluminium tower bolts : 150 x 10 mm .
Code
0701
0587
9999
0111

Description
MATERIALSAluminium tower bolt barrel type) 150x10
mm
C.P. brass screws 30 mm
Carriage of materials
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

10 No

10.00

360.00

100 N
L.S.

80.00
2.73

150.00
1.49

0.08

301.00
Total:
508.15

Day

Add water charges @ 1% on

Add C.P & OH @15% on

513.23
Cost for 10.00 Nos

DSR-12

Page 313 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 59.02
Rs 59.00

Item Code: 9.97.5

P/F anodised aluminium tower bolts : 100 x 10 mm ._x000D_
Code

Details of Cost for : 10.00 Nos

Unit
Quantity

Description

0702

MATERIALS:
Anodised Aluminium tower bolt (barrel type)100x10 mm

0587
9999

Chromium plated Brass screws 30 mm

Carriage of materials

Rate

10 No

10.00

280.00

100 N

60.00

150.00

L.S.

2.73

1.49

Day

0.08

301.00
Total:
398.15

LABOUR :
0111

Carpenter 1st class

Add water charges @ 1% on

Add C.P & OH @15% on

402.13
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 46.25
Rs 46.25

Item Code: 9.98

Code
2464
9999
0112

Description

Details of Cost for : 10.00 Nos

Unit
Quantity

MATERIALSaluminum Pull bolt lock with necessary screws, bolts, each

eachnuts and washers complete
Carriage of materials
L.S.
LABOURCarpenter 2nd class
Day

Rate

10.00

46.00

6.37

1.49

0.25

273.00
Total:
537.74

Add water charges @ 1% on

Add C.P & OH @15% on

543.12
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 62.46
Rs 62.45

Item Code: 9.99

P/F 50 cm long aluminium kicking plate 100 x 3.15 mm .
Code
0706
0588
9999
0111
0114

Description
MATERIALS
Kicking plate 50 cm long - 100x3.15 mm
C.P. brass screws 25 mm
Carriage of materials
LABOURCarpenter 1 st class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity
each
100 N
L.S.
Day
Day

10.00
40.00
5.46

125.00
115.00
1.49

0.07
0.05

301.00
247.00
Total:
1337.56

Add water charges @ 1% on

DSR-12

Rate

Page 314 of 2298

Add C.P & OH @15% on

1350.94
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 155.36
Rs 155.35

Item Code: 9.100.1

P/F anosied aluminium handles: 125 mm .
Code
0703

Details of Cost for : 10.00 Nos

Description
Unit
Quantity
Anodised Aluminium handles 125 mm with plate 175 x 32 mm 10 No
10.00

0588
9999

Chromium plated Brass screws 25 mm

Carriage of materials

100 N

Rate
470.00

40.00

115.00

L.S.

2.73

1.49

Day

0.06

301.00
Total:
538.13

LABOUR :
0111

Carpenter 1st class

Add water charges @ 1% on

Add C.P & OH @15% on

543.51
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 62.50
Rs 62.50

Item Code: 9.100.2

P/F anosied aluminium handles: 100 mm .
Code
0704
0588
9999
0111

Description
MATERIALSAluminium handles 100 mm
C.P. brass screws 25 mm
Carriage of materials
LABOURCarpenter 1 st class

Details of Cost for : 10.00 Nos

Unit
Quantity
10 No
100 N
L.S.
Day

Rate

10.00
40.00
1.82

360.00
115.00
1.49

0.06

301.00
Total:
426.77

Add water charges @ 1% on

Add C.P & OH @15% on

431.04
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 49.57
Rs 49.55

Item Code: 9.100.3

P/F anosied aluminium handles: 75 mm .
Code
0705
0589
9999
0111

DSR-12

Description
MATERIALSAluminium handles 75 mm
C.P. brass screws 25 mm
Carriage of materials
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity
10 No
100 N
L.S.
Day

Rate

10.00
40.00
1.82

300.00
100.00
1.49

0.06

301.00

Page 315 of 2298

Add water charges @ 1% on

Total:
360.77

Add C.P & OH @15% on

364.38
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 41.90
Rs 41.90

Item Code: 9.101.1

P/F aluminium hanging floor door stopper :- Single rubber stopper ._x000D_
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
2459
Anodised Aluminium hanging type door stopper
each
10.00
0588
Chromium plated Brass screws 25 mm
100 N
20.00
9999
Carriage of materials
L.S.
2.73
0111
Carpenter 1st class
Day
0.03
Add water charges @ 1% on

Rate
21.00
115.00
1.49
301.00
Total:
246.10

Add C.P & OH @15% on

248.56
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 28.58
Rs 28.60

Item Code: 9.101.2

P/F aluminium hanging floor door stopper - Twin rubber stopper
Code
7059
0588
9999
0111

Description
MATERIALSAluminium hanging floor door stopper with
twin rubber stopper
C.P. brass screws 25 mm
Carriage of materials
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

each

10.00

58.00

100 N
L.S.

20.00
2.73

115.00
1.49

0.03

301.00
Total:
616.10

Day

Add water charges @ 1% on

Add C.P & OH @15% on

622.26
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 71.56
Rs 71.55

Item Code: 9.102

P/F aluminium casement stays anodised (anodic coating not less than grade AC 10 as per IS : 1868).
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
MATERIALS2465
Aluminium casement stays
each
10.00
0588
C.P. brass screws 25 mm
100 N
40.00
9999
Carriage of materials
L.S.
0.91
LABOUR0111
Carpenter 1 st class
Day
0.10

DSR-12

Rate

46.00
115.00
1.49
301.00

Page 316 of 2298

Add water charges @ 1% on

Total:
537.46

Add C.P & OH @15% on

542.83
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 62.43
Rs 62.40

Item Code: 9.103

P/F bright finished brass 100mm mortice latch and lock with six levers (Best make of approved quality).
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost for 1 lock
MATERIALS7001
100 mm mortice latch and lock (without handles)
each
1.00
7003
Pair of aluminium handles
each
1.00
LABOUR0111
Carpenter 1 st class
Day
0.17
9999
Sundries including carriage of materials
L.S.
4.55
Add water charges @ 1% on

Rate

250.00
300.00
301.00
1.49
Total:
607.95

Add C.P & OH @15% on

614.03
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 706.13
Rs 706.15

Item Code: 9.104

P/F aluminium tee chanals (heavy duty) with rollers, stop end in pelmets as curtain rod.
Details of Cost for : 2.00 m
Code
Description
Unit
Quantity
MATERIALS7056
Aluminium channel (heavy duty) with and stop end as curtain metre
2.00
rod
9999
Labour
L.S.
2.73
9999
Sundries
L.S.
1.43
Add water charges @ 1% on

Rate
45.00
1.49
1.49
Total:
96.20

Add C.P & OH @15% on

97.16
Cost for 2.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 55.87
Rs 55.85

Item Code: 9.105.1

P/F partition upto ceiling height consisting of G.I. frame and required board: 67 mm overall thickness partition with 8.5 mm thick
glass reinforced Gypsum(GRG) board.
Details of Cost for : 21.90 Sqm
Code
Description
Unit
Quantity
Rate
Materials for 6.00x3.65 = 21.9 sqm. (Partition Panel)
7366
(i)Glass reinforced Gyp sum ( GRG) board 8.5 mm thick
sqm
43.80
230.00
7367
(ii) 50mm floor and ceiling channel 2x6.00 =12m
m
12.00
60.00
7369
(iii) 48mm stud-72x34x36x0.5mm
metre
40.15
72.00
(6.00/0.61)+1 = 11x3.65 = 40.15m

DSR-12

Page 317 of 2298

7020

7388

7048
0869
0763
7018
7021
1022
1211
9999
9999
0111
0112
0131
0114

(iv) Screw 20mm long (drive all scews)

100 N
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84 = 392
Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia
bolt
[(6.00/0.61)+1]x2=22
each
(vi) Rawl plug [(3.65/0.45)+1]x2= 18
each
(vii) Plaster of paris, (88/100)x21.9 = 19.27
kilog
(viii) Glue (22/100)x21.90=4.82
kilog
(ix) Paper tape (120m roll)
roll
(300/100)x21.90/120 = 0.584 Nos.
(x) Primer (36/100)21.90 = 7.88 litre
litre
(xi) Galvanised steel bolts & nuts 6mm dia.
10 No
25mm Long 11x2x2=44
(xii) G.I. Plain washer for seam bolts
100 N
Sundries carriage
L.S.
Sundries scaffolding
L.S.
Labour for 21.90 sqm.
Carpernter 1st class 0.3x21.90
Day
Carpenter 2nd class 0.13x21.90
Day
Painter 0.05x21.90
Day
Beldar 0.35x21.90
Day

392.00

56.00

22.00
18.00
19.27
4.82
0.584

48.00
10.00
4.00
65.00
140.00

7.88
44.00

85.00
20.00

44.00
52.00
130.00

32.00
1.49
1.49

6.57
2.847
1.095
7.665

301.00
273.00
273.00
247.00
Total:
21602.52

Add water charges @ 1% on

Add C.P & OH @15% on

21818.55
Cost for 21.90 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1145.72
Rs 1145.70

Item Code: 9.105.2

P/F partition upto ceiling height consisting of G.I. frame and required board: 75 mm overall thickness partition with 12.5 mm plain
Gypsum board.
Details of Cost for : 21.90 Sqm
Code
Description
Unit
Quantity
Rate
Materials for 6.00x3.65 = 21.9 sqm. (Partition Panel)
8717
(i) 12.5mm thick Plain
sqm
43.80
160.00
Gypsum board -2x6.00x3.65=43.80sqm.
7367
(ii) 50mm floor and ceiling channel 2x6.00 = 12m
m
12.00
60.00
7369
(iii) 48mm stud-72x34x36x0.5mm
metre
40.15
72.00
(6.00/0.61)+1 = 11x3.65 = 40.15m
7020
(iv) Screw 20mm long (drive all scews)
100 N
392.00
56.00
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84 = 392
7388
Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia
bolt
[(6.00/0.61)+1]x2=22
each
22.00
48.00
7048
(vi) Rawl plug [(3.65/0.45)+ 1]x2= 18
each
18.00
10.00
0869
(vii) Plaster of paris, (88/100)x21.9 = 19.27
kilog
19.27
4.00
0763
(viii) Glue (22/100)x21.90=4.82
kilog
4.82
65.00
7018
(ix) Paper tape (120m roll)
roll
0.584
140.00
(300/100)x21.90/120 = 0.584 Nos.
7021
(x) Primer (36/100)21.90 = 7.88 litre
litre
7.88
85.00
1022
(xi) Galvanised steel bolts & nuts 6mm dia.
10 No
44.00
20.00
25mm Long 11x2x2=44
1211
(xii) G.I. Plain washer for seam bolts
100 N
44.00
32.00
9999
Sundries carriage
L.S.
52.00
1.49
9999
Sundries scaffolding
L.S.
130.00
1.49

DSR-12

Page 318 of 2298

0111
0112
0131
0114

Labour for 21.90 sqm.

Carpernter 1st class 0.3x21.90
Carpenter Ilnd class 0.13x21.90
Painter 0.05x21.90
Beldar 0.35x21.90

Day
Day
Day
Day

6.57
2.847
1.095
7.665

Add water charges @ 1% on

301.00
273.00
273.00
247.00
Total:
18536.52

Add C.P & OH @15% on

18721.89
Cost for 21.90 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 983.11
Rs 983.10

Item Code: 9.105.3

P/F partition upto ceiling height consisting of G.I. frame and required board: 66 mm overall thickness partition with 8 mm thick
double skin Calcium Sili- cate board.
Details of Cost for : 21.90 Sqm
Code
Description
Unit
Quantity
Rate
Materials for 6.00x3.65 = 21.9 sqm. (Partition Panel)
8699
(i) 8 mm thick tapered edge calcium silicate
sqm
43.80
223.00
board .
7367
(ii) 50mm floor and ceiling channel 2x6.00
m
12.00
60.00
= 12m
7369
(iii) 48mm stud-72x34x36x0.5mm
metre
40.15
72.00
(6.00/0.61)+1 = 11x3.65= 40.15m
7020
(iv) Screw 20mm long (drive all scews)
100 N
392.00
56.00
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84 = 392
7388
Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia
bolt
[(6.00/0.61)+1]x2=22
each
22.00
48.00
7048
(vi) Rawl plug [(3.65/0.45)+1]x2= 18
each
18.00
10.00
0869
(vii) Plaster of paris, (88/100)x21.9 = 19.27
kilog
19.27
4.00
0763
(viii) Glue (22/100)x21.90=4.82
kilog
4.82
65.00
7018
(ix) Paper tape (120m roll)
roll
0.584
140.00
(300/100)x21.90/120 = 0.584 Nos
7021
(x) Primer (36/100)21.90 = 7.88 litre
litre
7.88
85.00
1022
(xi) Galvanised steel bolts & nuts 6mm dia.
10 No
44.00
20.00
25mm Long 11x2x2=44
1211
(xii) G.I. Plain washer for seam bolts
100 N
44.00
32.00
9999
Sundries carriage
L.S.
52.00
1.49
9999
Sundries scaffolding
L.S.
130.00
1.49
Labour for 21.90 sqm.
0111
Carpernter 1st class 0.3x21.90
Day
6.57
301.00
0112
Carpenter Ilnd class 0.13x21.90
Day
2.847
273.00
0131
Painter 0.05x21.90
Day
1.095
273.00
0114
Beldar 0.35x21.90
Day
7.665
247.00
Total:
Add water charges @ 1% on
21295.92
Add C.P & OH @15% on
21508.88
Cost for 21.90 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1129.46
Rs 1129.45

Item Code: 9.105.4

DSR-12

Page 319 of 2298

P/F partition upto ceiling height consisting of G.I. frame and required board: 66 mm overall thickness partition using 8 mm thick
double skin cement board as per IS:14862 with suita- ble fibre cement screws.

Code
0237
7367
7369
7020

7388

7048
0869
0763
7018
7021
1022
1211
9999
9999
0111
0112
0131
0114

Details of Cost for : 21.90 Sqm

Description
Unit
Quantity
Materials for 6.00x3.65 =21.9 sqm. (Partition Panel)
(i) 8 mm thick multipurpose non asbestos fibre
sqm
43.80
cement board.
Materials for 6.00x3.65 =21.9 sqm. (Partition Panel)
m
12.00
(iii) 48mm stud-72x34x36x0.5mm
metre
40.15
(6.00/0.61)+1 = 11x3.65 = 40.15m
(iv) Screw 20mm long (drive all scews)
100 N
392.00
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84 = 392
Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia
bolt
[(6.00/0.61)+1]x2=22
each
22.00
(vi) Rawl plug [(3.65/0.45)+1]x2= 18
each
18.00
(vii) Plaster of paris, (88/100)x21.9 = 19.27
kilog
19.27
(viii) Glue (22/100)x21.90=4.82
kilog
4.82
(ix) Paper tape (120m roll)
roll
0.584
(300/100)x21.90/120 = 0.584 No.
(x) Primer (36/100)21.90 = 7.88 litre
litre
7.88
(xi) Galvanised steel bolts & nuts 6mm dia.
10 No
44.00
25mm Long 11x2x2=44
(xii) G.I. Plain washer for seam bolts
100 N
44.90
Sundries carriage
L.S.
52.00
Sundries scaffolding
L.S.
130.00
Labour for 21.90 sqm.
Carpernter 1st class 0.3x21.90
Day
6.57
Carpenter Ilnd class 0.13x21.90
Day
2.847
Painter 0.05x21.90
Day
1.095
Beldar 0.35x21.90
Day
7.665
Add water charges @ 1% on

Rate
206.00
60.00
72.00
56.00

48.00
10.00
4.00
65.00
140.00
85.00
20.00
32.00
1.49
1.49
301.00
273.00
273.00
247.00
Total:
20551.61

Add C.P & OH @15% on

20757.13
Cost for 21.90 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1089.99
Rs 1089.95

Item Code: 9.106.1

P/F PTMT handle with necessary screws complete: 125 x 34 x 24 mm weighing not less than 24 grams.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
MATERIALS7512
PTMT handle 125x34x24mm
Each
10.00
0639
Mild steel screws 25 mm
100 N
40.00
9999
Carriage of materials
L.S.
2.73
LABOUR0112
Carpenter 2nd class
Day
0.06
Add water charges @ 1% on

Rate
30.00
30.00
1.49
273.00
Total:
332.45

Add C.P & OH @15% on

335.77
Cost for 10.00 Nos
Rate per Each:

DSR-12

Rs 38.61

Page 320 of 2298

Rate as per DSR-12:

Rs 38.60

Item Code: 9.106.2

P/F PTMT handle with necessary screws complete: 125 x 34 x 24 mm weighing not less than 24 grams.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
MATERIALS7513
PTMT handle 150x34x24mm
Each
10.00
0639
Mild steel screws 25 mm
100 N
40.00
9999
Carriage of materials
L.S.
2.73
LABOUR0112
Carpenter 2nd class
Day
0.06
Add water charges @ 1% on

Rate
34.00
30.00
1.49
273.00
Total:
372.45

Add C.P & OH @15% on

376.17
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 43.26
Rs 43.25

Item Code: 9.107.1

P/F PTMT butt hinges with necessary screws complete: 75 x 60 x 10 mm fitted with 5.5 mm dia. M.S bright bar.

Code
7514
0638
9999
0112
0114

Description
MATERIALSPTMT butt hinges 75x60x10mm
Iron screws 30 mm
Carriage of materials
LABOURCarpenter 2nd class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity
Each
100 N
L.S.
Day
Day

Rate

10.00
60.00
1.82

42.00
40.00
1.49

0.14
0.09

273.00
247.00
Total:
507.16

Add water charges @ 1% on

Add C.P & OH @15% on

512.23
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 58.91
Rs 58.90

Item Code: 9.107.2

P/F PTMT butt hinges with necessary screws complete: 100 x 75 x 10 mm fitted with 5.5 mm dia. M.S bright bar.

Code
7515
0637
9999
0112
0114

Description
MATERIALSPTMT butt hinges 100x75x 10mm
Iron screws 40 mm
Carriage of materials
LABOURCarpenter 2nd class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity
Each
100 N
L.S.
Day
Day

10.00
80.00
2.73

56.00
50.00
1.49

0.14
0.09

273.00
247.00
Total:
664.52

Add water charges @ 1% on

DSR-12

Rate

Page 321 of 2298

Add C.P & OH @15% on

671.17
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 77.19
Rs 77.20

Item Code: 9.108.1

P/F PTMT tower bolts one piece 12mm rod with necessary screws complete: 152 x 42 x 18 mm weighing not less than 60 grams.

Code
7516
0638
9999
0112

Description
MATERIALSPTMT Tower bolt 152x42x18mm
Mild steel screws 30 mm
Carriage of materials
LABOURCarpenter 2nd class

Details of Cost for : 10.00 Nos

Unit
Quantity
Each
100 N
L.S.
Day

Rate

10.00
60.00
2.73

65.00
40.00
1.49

0.08

273.00
Total:
699.91

Add water charges @ 1% on

Add C.P & OH @15% on

706.91
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 81.30
Rs 81.30

Item Code: 9.108.2

P/F PTMT tower bolts one piece 12mm rod with necessary screws complete: 202 x 42 x 18 mm weighing not less than 78 grams.

Code
7517
0638
9999
0112

Description
MaterialsPTMT Tower bolt 202x42x 18mm
Mild steel screws 30 mm
Carriage of materials
LABOURCarpenter 2nd class

Details of Cost for : 10.00 Nos

Unit
Quantity
Each
100 N
L.S.
Day

Rate

10.00
80.00
2.73

80.00
40.00
1.49

0.10

273.00
Total:
863.37

Add water charges @ 1% on

Add C.P & OH @15% on

872.00
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 100.28
Rs 100.30

Item Code: 9.109

P/F PTMT door clacher of length 72 mm and dia. of 42 mm with suitable washers weighing 33 grams.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
MATERIALS7518
PTMT door catcher 72x42mm
Each
10.00
0639
Mild steel screws 25 mm
100 N
20.00
9999
Carriage of materials
L.S.
2.73
LABOUR0111
Carpenter 1st class
Day
0.03

DSR-12

Rate
27.00
30.00
1.49
301.00
Total:

Page 322 of 2298

Add water charges @ 1% on

289.10

Add C.P & OH @15% on

291.99
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 33.58
Rs 33.60

Item Code: 9.110

P/F Bamboo jaffery/ fencing consisting of superior quality 25 mm dia. half cut bamboo.
Details of Cost for : 2.10 Sqm
Code
Description
Unit
Quantity
Details of cost for a bamboo jaffery of size
1.00m x 2.10m = 2.10 sqm
MATERIALS
(I) Bamboo 25mm of 100/ 2.50 = 40 nos
Half cut off = 40/2 .=20 nos. x 2.10 = 42.00m
Add wastage @ 15% = 6.30 m
Total = 48.30m
0305
Bamboo 25 mm dia 2.5 metre long
score
48.30
9999
Carriage of Bamboo
L.S.
4.83
Hollock wood scantling
3 nos. (1.00 x 0.05 x 0.025) = 0.00375 cum
Add wastage @ 5% = 0.00019 cum
Total = 0.00394 cum or 3.94 cudm
2466
Hollock wood in scantling
cum
0.00394
2204
Carraige of Timber
cum
0.0039
9999
Nails and wire
L.S.
20.25
LABOUR
0112
Carpenter 2nd class
Day
0.25
0114
Beldar
Day
0.25
9999
Sundries
L.S.
10.05
Add water charges @ 1% on

Rate

300.00
1.49

31000.00
100.11
1.49
273.00
247.00
1.49
Total:
594.67

Add C.P & OH @15% on

600.62
Cost for 2.10 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 328.91
Rs 328.90

Item Code: 9.111.1

P/F wooden moulded corner beading of triangular shape: 50x50 mm (base and height).
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
MATERIALS
Teak wood 2nd class in plan ks 5.00x.05x.05/2 = 0.00625 cum

1190
2204
0637

13.050.01

DSR-12

Add wastage @10% = 0.00063

total = 0.00688 cum say 6.88 cudm
Second class teak wood in planks
cum
Carriage of Timber
cum
Iron screws
100 N
Priming coat
Area 5.0 x (.05 +.05) = 0.50 sqm
Applying priming coat : With ready mixed pink or Grey primer
(hard and soft wood)
LABOUR:-

Rate

0.00688
0.0069
6.00

72000.00
100.11
50.00

0.50

25.83

Page 323 of 2298

0111

For plaining, fixing & making design

Carpenter 1st class

Day

0.75

Add water charges @ 1% except on [A] i.e on

301.00
Total:
724.80

Add C.P & OH @15% except on [A] i.e on

732.05
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 170.96
Rs 170.95

Item Code: 9.112

P/F second class teak wood lipping/moulded beading or taj beading of size 18x5mm.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS
8719
2nd class teak wood lipping/ moulded beadibg or Taj beading metre
10.00
of size 18X5mm
LABOUR
0112
Carpenter 2nd class
Day
0.25
0114
Beldar
Day
0.25
Add water charges @ 1% on

Rate
25.00

273.00
247.00
Total:
380.00

Add C.P & OH @15% on

383.80
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 44.14
Rs 44.15

Item Code: 9.113

P/F 100mm CP brass mortice lock 6 levers without handles.. ..
Code
8716
0111
9999

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS:
100 mm mostice lock with 6 levers for aluminium door.
LABOUR
Carpenter 1st class
Sundries(screws, carriage etc)

Rate

each

1.00

310.00

Day
L.S.

0.13
2.60

301.00
1.49
Total:
353.00

Add water charges @ 1% on

Add C.P & OH @15% on

356.53
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 410.01
Rs 410.00

Item Code: 9.114.1

P/F magnetic catcher in cup- board/ward robe shutters: Triple strip vertical type.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
8714
Magenatic catcher triple strip verticle type.
each
1.00
9999
Sundries including screws and fixing charges.
L.S.
2.60
Add water charges @ 1% on

DSR-12

Rate
15.00
1.49
Total:
18.87

Page 324 of 2298

Add C.P & OH @15% on

19.06
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 21.92
Rs 21.90

Item Code: 9.114.2

P/F magnetic catcher in cup- board/ward robe shutters: Doublee strip horizontal type.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
8715
Magenatic catcher double strip horizontal type.
each
1.00
9999
Sundries including screws and fixing charges.
L.S.
2.60
Add water charges @ 1% on

Rate
12.00
1.49
Total:
15.87

Add C.P & OH @15% on

16.03
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 18.43
Rs 18.45

Item Code: 9.115

P/F powder coated telescopic drawer channels 300 mm long.
Code
8703
9999
9999

Description
MATERIALS
Telescopic drawer channels 300mm long.
Carriage
Sundries including screws and fixing charges.

Details of Cost for : 10.00 sets

Unit
Quantity
set
L.S.
L.S.

10.00
19.50
100.10

Add water charges @ 1% on

Rate
135.00
1.49
1.49
Total:
1528.21

Add C.P & OH @15% on

1543.49
Cost for 10.00 sets
Rate per Each Set:
Rate as per DSR-12:

Rs 177.50
Rs 177.50

Item Code: 9.116

P/F sliding arrangement in racks/ cupboards/ cabinate shutter.
Code

Description

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

MATERIALS
8704
9999

Labour for fixing

each
L.S.

1.00
1.04

Add water charges @ 1% on

8.00
1.49
Total:
9.55

Add C.P & OH @15% on

9.65
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 11.10
Rs 11.10

Page 325 of 2298

Item Code: 9.117.1

P/F factory made UPVC door frame made of UPVC extruded section: Extruded section profile size 48 x 40 mm.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8010
48mmX40mmX2mm thick Factory made door frame of PVC Metre
5.00
142.00
extruded sections in white, grey or woo
LABOUR
0156
Carpenter (average)
Day
0.15
287.00
0114
Beldar
Day
0.15
247.00
9999
Sundries
L.S.
4.68
1.49
Total:
Add water charges @ 1% on
797.07
Add C.P & OH @15% on
805.04
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 185.16
Rs 185.15

Item Code: 9.117.2

P/F UPVC door frame - Extruded section profile size 42 x 50 mm._x000D_
Details of Cost for : 5.00 m
Unit
Quantity

Code

Description

8705

MATERIALS:
50mm x 42mm x 2mm thick Factory made door frame of PVC
extruded sections in white,

0156
0114
9999

LABOUR :
Carpenter (average)
Beldar
Sundries :

Rate

metre

5.00

135.00

Day
Day
L.S.

0.15
0.15
4.68

287.00
247.00
1.49
Total:
762.07

Add water charges @ 1% on

Add C.P & OH @15% on

769.69
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 177.03
Rs 177.05

Item Code: 9.118.1

P/F to existing door frames: 24 mm thick factory made PVC door shutter.
Code

8001

0156
0114
9999

DSR-12

Details of Cost for : 2.38 Sqm

Description
Unit
Quantity
Detail of cost for 2.38 sqm
one door shutter 2.20x1.08m = 2.38 sqm
MATERIALS
24 mm thick Factory made shutters with frame, rails and sqm
2.38
panels of PVC extruded sections i
LABOUR
Carpenter (average)
Day
0.40
Beldar
Day
0.40
Sundries
L.S.
20.36

Rate

2025.00

Add water charges @ 1% on

287.00
247.00
1.49
Total:
5063.44

Add C.P & OH @15% on

5114.07

Page 326 of 2298

Cost for 2.38 Sqm

Rate per One Sqm:
Rate as per DSR-12:

Rs 2471.08
Rs 2471.10

Item Code: 9.118.2

P/F to existing door frames: 30 mm thick factory made PVC door shutter with decorative moulding edging.
Details of Cost for : 2.38 Sqm
Code
Description
Unit
Quantity
Detail of cost for 2.38 sqm.
one door shutter 2.20x1.08m = 2.38 sqm
MATERIALS
8002
30 mm thick Factory made shutters with frame, rails and sqm
2.38
panels of PVC extruded sections i
LABOUR
0156
Carpenter (average)
Day
0.40
0114
Beldar
Day
0.40
9999
Sundries
L.S.
20.36
Add water charges @ 1% on

Rate

2125.00

287.00
247.00
1.49
Total:
5301.44

Add C.P & OH @15% on

5354.45
Cost for 2.38 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2587.24
Rs 2587.25

Item Code: 9.118.3

P/F to existing door frames: 25 mm thick (PVC) flush door shutter made out of a one piece Multi chamber extruded PVC section of
the size of 762 mm x 25 mm or less.
Details of Cost for : 2.38 Sqm
Code
Description
Unit
Quantity
Rate
Details of Cost one door shutter 2.20x1.08m = 2.38 sqm
MATERIALS
8706
25mm thick factory made PVC flash foor shutter.
sqm
2.38
2050.00
LABOUR
0156
Carpenter (average)
Day
0.40
287.00
0114
Beldar
Day
0.40
247.00
9999
Sundries
L.S.
20.36
1.49
Total:
Add water charges @ 1% on
5122.94
Add C.P & OH @15% on
5174.17
Cost for 2.38 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2500.13
Rs 2500.15

Item Code: 9.119

P/F factory made PVC door frame of size 50x 47 mm with a wall thickness of 5 mm.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Details of cost for one door frame of 5 metre
MATERIALS8011
Factory made door frame PVC extruded sheet i/c carriage
metre
5.00

Rate

330.00

LABOUR-

DSR-12

Page 327 of 2298

0156
0114
9999

Carpenter (average)
Beldar
Sundries

Day
Day
L.S.

0.15
0.15
7.80

Add water charges @ 1% on

287.00
247.00
1.49
Total:
1741.72

Add C.P & OH @15% on

1759.14
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 404.60
Rs 404.60

Item Code: 9.120.1

P/F UPVC door shutter - 30mm thick factory made_x000D_
panel PVC door shutters (for W.C. and bathroom_x000D_
Code

8003
8100
0637
0640
0156
0114
9999

Details of Cost for : 2.38 Sqm

Description
Unit
Quantity
DETAILS OF COST OF ONE SHUTTER 2.20X1.08M = 2.38 SQM
MATERIALSFactory made shutter i/c carriage
sqm
2.38
Powder coated M.S. Butt Hinges
10 No
4.00
MS Screws 40mm
100 N
48.00
MS screws 20mm
100 N
8.00
LABOUR :
Carpenter (average)
Day
0.40
Beldar
Day
0.40
Sundries
L.S.
20.36
Add water charges @ 1% on

Rate

2025.00
79.00
50.00
25.00
287.00
247.00
1.49
Total:
5121.04

Add C.P & OH @15% on

5172.25
Cost for 2.38 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2499.20
Rs 2499.20

Item Code: 9.120.2

P/F to existing door frames: 30 mm thick factory made solid both side pre-laminated panel P.V.C. door shutter.

Code

8004
8100
0637
0640
0156
0114
9999

Description
Details of cost of one shutter 2.20x1.08m = 2.38 sqm
MATERIALSFactory made PVC shutter i/c carriage
Powder coated M.S. butt hinges 100mm X58mmX1.9mm
M.S. screws 40mm
M.S. screws 20mm
LABOURCarpenter (average)
Beldar
Sundries

Details of Cost for : 2.38 Sqm

Unit
Quantity

Rate

sqm
10 No
100 N
100 N

2.38
4.00
48.00
8.00

2420.00
79.00
50.00
25.00

Day
Day
L.S.

0.40
0.40
20.36

287.00
247.00
1.49
Total:
6061.14

Add water charges @ 1% on

Add C.P & OH @15% on

6121.75
Cost for 2.38 Sqm

DSR-12

Page 328 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 2957.99
Rs 2958.00

Item Code: 9.121

P/F of Fiber Reinforced plstic (FRP) Door frames of of size 90 mm x 45 mm._x000D_
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
8707
Factory made glass reinforced plastic door frame 90x45 mm metre
5.00
i/c carriage
LABOUR :
0156
0114
9999

Carpenter (average)
Beldar
Sundries

Day
Day
L.S.

0.15
0.15
7.80

Add water charges @ 1% on

Rate
365.00

287.00
247.00
1.49
Total:
1916.72

Add C.P & OH @15% on

1935.89
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 445.25
Rs 445.25

Item Code: 9.122.1

P/F to existing door frames: 30 mm thick Glass fiber Reinforced plastic (FRP) panelled door shutter.
Details of Cost for : 2.38 Sqm
Code
Description
Unit
Quantity
MATERIALS8708
30 mm thick factory made glass fiber reinforced plastic panel sqm
2.38
door shutter i/c carriag
8100
Powder coated M.S. butt hinges 100mm X58mmX1.9mm
10 No
4.00
0637
M.S. screws 40mm
100 N
48.00
0640
M.S. screws 20mm
100 N
8.00
LABOUR0156
Carpenter (average)
Day
0.40
0114
Beldar
Day
0.40
9999
Sundries
L.S.
20.36
Add water charges @ 1% on

Rate
1715.00
79.00
50.00
25.00
287.00
247.00
1.49
Total:
4383.24

Add C.P & OH @15% on

4427.07
Cost for 2.38 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2139.13
Rs 2139.15

Item Code: 9.122.2

P/F to existing door frames: 30 mm thick Glass fiber Reinforced plastic (FRP) flush door shutter.
Details of Cost for : 2.38 Sqm
Code
Description
Unit
Quantity
Details of cost of one shutter 2.20x1.08m = 2.38 sqm
MATERIALS8730
30 mm thick factory made glass fiber reinforced plastic flush sqm
2.38
door shutter i/c carriage
8100
Powder coated M.S. butt hinges 100mm X58mmX 1.9mm
10 No
4.00
0637

DSR-12

M.S. screws 40mm

100 N

48.00

Rate

1975.00
79.00
50.00

Page 329 of 2298

0640
0156
0114
9999

M.S. screws 20mm

LABOURCarpenter (average)
Beldar
Sundries

100 N
Day
Day
L.S.

8.00

25.00

0.40
0.40
20.36

287.00
247.00
1.49
Total:
5002.04

Add water charges @ 1% on

Add C.P & OH @15% on

5052.06
Cost for 2.38 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2441.12
Rs 2441.10

Item Code: 9.123

P/F factory made door frame (Single rebate) made of solid P.V.C. foam profile of size 60 mm width and 30 mm thick.

Code

8710

Description
Details of cost for one door frame of 5 metre
MATERIALSFactory made solid PVC door frame 60 x30mm i/c carriage.

0156
0114
9999

LABOURCarpenter (average)
Beldar
Sundries

Details of Cost for : 5.00 m

Unit
Quantity

Rate

metre

5.00

270.00

Day
Day
L.S.

0.15
0.15
7.80

287.00
247.00
1.49
Total:
1441.72

Add water charges @ 1% on

Add C.P & OH @15% on

1456.14
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 334.91
Rs 334.90

Item Code: 9.124.1

P/F factory made 30mm solid PVC foam PVC door shutter .. Non decorative finish.
Details of Cost for : 2.38 Sqm
Code
Description
Unit
Quantity
MATERIALS:
8712
30 mm thick factory made solid PVC profile panelled door Sqm
2.38
single piece extruded profile non
8100
Powder coated M.S. butt hinges 100mm X58mmX1.9mm
10 No
4.00
0637
Bright finished or black enameled mild steel screws 40 mm
100 N
48.00
0640

Bright finished or black enameled mild steel screws 20 mm

100 N

0156
0114
9999

LABOUR:
Carpenter (average)
Beldar
Sundries

Day
Day
L.S.

Rate
2120.00
79.00
50.00

8.00

25.00

0.40
0.40
20.36

287.00
247.00
1.49
Total:
5347.14

Add water charges @ 1% on

Add C.P & OH @15% on

5400.61
Cost for 2.38 Sqm

DSR-12

Page 330 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 2609.54
Rs 2609.55

Item Code: 9.124.2

P/F factory made 30mm solid PVC foam PVC door shutter .. Decorative finish (both sides wood grains)
Details of Cost for : 2.38 Sqm
Code
Description
Unit
Quantity
MATERIALS:
8709
30mm thick factory made solid PVC profile panelled doort Sqm
2.38
single piece extruded profile dec
8100
Powder coated M.S. butt hinges 100mm X58mmX1.9mm
10 No
4.00
0637
Bright finished or black enameled mild steel screws 40 mm
100 N
48.00
0640

Bright finished or black enameled mild steel screws 20 mm

100 N

0156
0114
9999

LABOUR:
Carpenter (average)
Beldar
Sundries

Day
Day
L.S.

Rate
2500.00
79.00
50.00

8.00

25.00

0.40
0.40
20.36

287.00
247.00
1.49
Total:
6251.54

Add water charges @ 1% on

Add C.P & OH @15% on

6314.06
Cost for 2.38 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 3050.91
Rs 3050.90

Item Code: 9.125

P/F PVC rigid foam sheet 1 mm thick on bath, WC existing door shutters.
Code

8006

9999
0111
0114
0130

Description
Details of cost for 1.0x0.3m = 0.3 sqm
MATERIALSPVC rigid foam sheet1mm thick = 0.30 sqm
Add wastage @ 10% = 0.03 sqm
Total = 0.33 sqm
Rubber adhesive
LABOURCarpenter 1 st class
Beldar
Mistry

Details of Cost for : 0.30 Sqm

Unit
Quantity

Rate

sqm

0.33

173.00

L.S.

21.84

1.49

Day
Day
Day

0.11
0.14
0.02

301.00
247.00
301.00
Total:
163.34

Add water charges @ 1% on

Add C.P & OH @15% on

164.97
Cost for 0.30 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 632.40
Rs 632.40

Item Code: 9.126.1

P/F 12 mm thick panelling or penelling and glazed in penelled/ penelled & glazed shutters for doors, windows: Marine plywood of
lamination/ painting as per IS: 710.
Details of Cost for : 0.67 Sqm
Code
Description
Unit
Quantity
Rate

DSR-12

Page 331 of 2298

8724
9999
0111
9999

Details of cost for shutters of a door with 2/3rd

panelling...200x 108cm = 2.16sqm.
Panel area = 4x45.1x36.55cm = 0.67sqm.
MATERIALS:
Plywood 4x47.2x38.65cm = 0.73sqm+
Add for wastage @ 10% = 0.07sqm.
Total = 0.80 sqm.
12mm thick marine plywood conforming to IS:710
sqm
Carriage of Plywood
L.S.
LABOUR:
Carpenter 1 st class
Day
Sundries
L.S.

0.80
1.82

825.00
1.49

0.57
4.42

301.00
1.49
Total:
840.87

Add water charges @ 1% on

Add C.P & OH @15% on

849.28
Cost for 0.67 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1457.72
Rs 1457.70

Item Code: 9.126.2

P/F 12 mm thick panelling or penelling and glazed in penelled/ penelled & glazed shutters for doors, windows: Fire retardant ply
wood of laminationas as per IS: 710.
Details of Cost for : 0.67 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for shutters of a door with 2/3rd panelling..
.200x 108cm = 2.16sqm.
Panel area = 4x45.1x36.55cm = 0.67sqm.
MATERIALS:
Plywood 4x47.2x38.65cm = 0.73sqm+
Add for wastage @ 10% = 0.07sqm.
Total = 0.80 sqm.
8725
12mm thick fire retardant plywood conforming to IS: 5509.
sqm
0.80
860.00
9999
0111
9999

Carriage of Plywood
LABOUR:
Carpenter 1 st class
Sundries

L.S.

1.82

1.49

Day
L.S.

0.57
4.42

301.00
1.49
Total:
868.87

Add water charges @ 1% on

Add C.P & OH @15% on

877.56
Cost for 0.67 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1506.25
Rs 1506.25

Item Code: 9.127.1

P/F decorative high pressure laminated sheet of plain/wood grain in gloss/ matt/ suede finish with high density: 1.50 mm thick.

Code

8726

DSR-12

Description
MATERIALS
Decorative laminate = 5.00 sqm
Add wastage @ 10% = 0.50 sqm
Total = 5.50 sqm
1.5mm thick decorative laminated sheet

Details of Cost for : 5.00 Sqm

Unit
Quantity

sqm

5.50

Rate

475.00

Page 332 of 2298

9999
0111
0114
9999

Adhesive
LABOUR:Carpenter 1 st class
Beldar
Sundries i/c nails etc.

L.S.

195.00

1.49

Day
Day
L.S.

0.50
0.50
52.00

301.00
247.00
1.49
Total:
3254.53

Add water charges @ 1% on

Add C.P & OH @15% on

3287.08
Cost for 5.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 756.03
Rs 756.05

Item Code: 9.127.2

P/F decorative high pressure laminated sheet of plain/wood grain in gloss/ matt/ suede finish with high density: 1.00 mm thick.

Code

8727
9999
0111
0114
9999

Details of Cost for : 5.00 Sqm

Unit
Quantity

Description
MATERIALS
Decorative laminate = 5.00 sqm
Add wastage @ 10% = 0.50 sqm
Total = 5.50 sqm
1.0mm thick decorative laminated sheet
Adhesive
LABOUR:Carpenter 1st class
Beldar
Sundries i/c nails etc.

Rate

sqm
L.S.

5.50
195.00

350.00
1.49

Day
Day
L.S.

0.50
0.50
52.00

301.00
247.00
1.49
Total:
2567.03

Add water charges @ 1% on

Add C.P & OH @15% on

2592.70
Cost for 5.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 596.32
Rs 596.30

Item Code: 9.128

P/F factory made fiber glass reinfoced plastices (FRP) chajjas 4 mm thick.
Code

8713

Description
Detail of cost for a chajja 0.90 x 0.60 = 0.54 sqm
MATERIALS
Fiber glass reinforced plastic chajja including accessories.

9999
9999

Carriage
fixing charges including sundries.

Details of Cost for : 0.54 Sqm

Unit
Quantity

sqm
L.S.
L.S.

Rate

0.54

3460.00

26.00
143.00

1.49
1.49
Total:
2120.21

Add water charges @ 1% on

Add C.P & OH @15% on

2141.41
Cost for 0.54 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 4560.41
Rs 4560.40

Page 333 of 2298

Item Code: 9.129

P/F cupboard shutter 25 mm thick, with pre-laminated flat pressed three layer particle one side decorative lamination i/c IInd Class
wood lipping of 25 x 12 mm.
Details of Cost for : 2.20 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for one shutter 2.20x1.00m = 2.20sqm.
MATERIALS
7272
25 mm thick cup board shutter (prelaminated)
sqm
2.20
870.00
9999
Carriage
L.S.
29.64
1.49
8678
lmm thick 35mm wide bright finished stainless steel piano metre
4.40
37.00
hinges .
0685
Screws 25 mm long
100 N
125.00
35.00
LABOUR
0111
Carpenter 1 st class
Day
0.50
301.00
0114
Beldar
Day
0.50
247.00
0130
Mistry
Day
0.07
301.00
7271
Add for wooden lipping 25 mm wide x 12 mm
metre
7.00
39.00
Total:
Add water charges @ 1% on
2732.78
Add C.P & OH @15% on
2760.11
Cost for 2.20 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1442.79
Rs 1442.80

Item Code: 9.130.1

P/F cup board shutters with 25mm thick veneering particle board IS:3087 marked exterior grade-I of approved make: with
decorative veneering on one side and commercial other side.
Details of Cost for : 2.20 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for one shutter 2.20x1.00m = 2.20sqm.
MATERIALS
7269
25 mm thick cup board shutter
sqm
2.20
460.00
0346
Extra for teak veneering on one side and commercial sqm
2.20
235.00
veneereing on other side
9999
Carriage
L.S.
29.64
1.49
8678
lmm thick 35mm wide bright finished stainless steel piano metre
4.40
37.00
hinges.
0685
Screws 25 mm long
100 N
125.00
35.00
LABOUR
0111
Carpenter 1st class
Day
0.50
301.00
0114
Beldar
Day
0.50
247.00
0130
Mistry
Day
0.07
301.00
7271
Add for wooden lipping 25 mm wide x 12 mm thick
metre
7.00
39.00
Total:
Add water charges @ 1% on
2347.78
Add C.P & OH @15% on
2371.26
Cost for 2.20 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1239.52
Rs 1239.50

Item Code: 9.130.2

P/F cup board shutters with 25mm thick veneering particle board IS:3087 marked exterior grade-I of approved make: With nondecorative veneering on both sides.
Details of Cost for : 2.20 Sqm

DSR-12

Page 334 of 2298

Code

7269
0347
9999
8678
0685
0111
0114
0130
7271

Description
Unit
Details of cost for one shutter 2.20x1.00m = 2.20sqm.
MATERIALS
25 mm thick particle board
sqm
Extra for commercial veneering on both sides
sqm
Carriage
L.S.
1mm thick 35mm wide bright finished stainless steel piano metre
hinges.
Screws 25 mm long
100 N
LABOUR
Carpenter 1 st class
Day
Beldar
Day
Mistry
Day
Add for wooden lipping 25 mm wide x 12 mm
metre

Quantity

Rate

2.20
2.20
29.64
4.40

460.00
155.00
1.49
37.00

125.00

35.00

0.50
0.50
0.07
7.00

301.00
247.00
301.00
39.00
Total:
2171.78

Add water charges @ 1% on

Add C.P & OH @15% on

2193.50
Cost for 2.20 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1146.60
Rs 1146.60

Item Code: 9.131.1

P/F factory made pre-laminated particle board flat pressed three layer particle board one side decorative finish: 25 mm thick.

Code

7445
7443
7444
0834
9999
9999
0112
0114

Description
Details of cost for 2.10 sqm. (Door size 2.1x1.00 = 2.10 sqm.)
MATERIALS
Prelaminated particle board = 2.10sqm. +
Add for wastage @ 5% = 0.11 sqm.
= 2.21sqm.
Prelaminated particle board
Aluminium single cleat of size 30x32x3
Aluminium grip strip of size 50x12x2
Edge sealing water resistant paint
Carriage of materials including loading and unloading
Sundries and screws etc.
LABOUR
Carpenter 2nd class
Beldar

Details of Cost for : 2.10 Sqm

Unit
Quantity

Rate

sqm
each
each
litre
L.S.
L.S.

2.21
4.00
8.00
0.15
19.50
39.00

790.00
13.00
10.00
135.00
1.49
1.49

Day
Day

0.27
0.30

273.00
247.00
Total:
2133.13

Add water charges @ 1% on

Add C.P & OH @15% on

2154.46
Cost for 2.10 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1179.82
Rs 1179.80

Item Code: 9.132

P/F aluminium U beading of required size to pre-laminated / flush door shutter.
Details of Cost for : 1.00 Kg
Code
Description
Unit
Quantity
MATERIAL
Aluminum U beading = 1.00kg +

DSR-12

Rate

Page 335 of 2298

7449
9999
9999

Add 10% wastage = 0.10

= 1.10kg.
Aluminium U Beading
Anodized 15 micron
Sundries including screws, fixing, carriage etc.

kilog
L.S.
L.S.

1.10
65.00
13.00

Add water charges @ 1% on

208.00
1.49
1.49
Total:
345.02

Add C.P & OH @15% on

348.47
Cost for 1.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 400.74
Rs 400.75

Item Code: 9.133.1.1

P/F in position concealed G.I section for wall panelling using board: Tapered edge calcium silicate board made with calcareous and
siliceous materials: 10 mm thick.
Details of Cost for : 11.16 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 3.66 mx 3.05 m =11.16 sqm.
MATERIALS
Calcium silicate board 10mm thick.= 11.16 sqm
Add wastage @ 10% = 1.12 sqm.
Total = 12.28 sqm
8700
10 mm thick calcium silicate board.
sqm
12.28
370.00
8720
Ceiling sections.
metre
19.66
39.00
8721
Perimeter channel
metre
9.60
25.00
8722
Nylon sleeves & wooden screws (40mm)
each
42.00
1.90
8723
Counter sunk ribbed head screw 25mm.
cent
1.76
72.00
9999
Jointing compound
L.S.
20.80
1.49
7018
Joint tape roll
roll
0.19
140.00
9999
Sundries i/c rawl plug, scaffolding etc.
L.S.
52.00
1.49
9999
Carriage of materials
L.S.
26.00
1.49
LABOUR:0111
Carpenter 1st class
Day
3.80
301.00
0114
Beldar
Day
4.60
247.00
Total:
Add water charges @ 1% on
8210.67
Add C.P & OH @15% on
8292.78
Cost for 11.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 854.54
Rs 854.55

Item Code: 9.133.2.1

P/F in position concealed G.I section for wall panelling using board: Non asbestos multipurpose cement board reinfoced with
cellulose fiber: 8 mm thick.
Details of Cost for : 11.16 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 3.66 m x 3.05 m =11.16 sqm.
MATERIALS
Multipurpose non asbestos fibre cement board 8mm thick.=
11.16 sqm
Add wastage @ 10% =1.12 sqm.
Total = 12.28 sqm
0237
8 mm thick multipurpose non asbestos fibre cement board.
sqm
12.28
206.00

DSR-12

Page 336 of 2298

8720
8721
8722
8723
9999
7018
9999
9999
0111
0114

Ceiling sections.
Perimeter channel
Nylon sleeves & wooden screws (40mm)
Counter sunk ribbed head screw 25mm.
Jointing compound
Joint tape roll
Sundries i/c rawl plug, scaffolfing etc.
Carriage of materials
LABOUR:Carpenter 1st class
Beldar

metre
metre
each
cent
L.S.
roll
L.S.
L.S.
Day
Day

19.66
9.60
42.00
1.76
20.80
0.19
52.00
26.00

39.00
25.00
1.90
72.00
1.49
140.00
1.49
1.49

3.80
4.60

301.00
247.00
Total:
6196.75

Add water charges @ 1% on

Add C.P & OH @15% on

6258.72
Cost for 11.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 644.94
Rs 644.95

Item Code: 9.133.3.1

P/F in position concealed G.I section for wall panelling using board: Gypsum board conforming to IS: 2095-1996 Part-I: 12.5 mm
thick.
Details of Cost for : 11.16 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 3.66 m x 3.66 m - 11.16 sqm.
MATERIALS
Glass fibre reinforced gypsum board 12.5 mm thick.= 11.16
sqm
Add wastage @ 10% = 1.12 sqm.
Total = 12.28 sqm
8717
12.5 mm thick Glass fibre reinforced Gypsum board.
sqm
12.28
160.00
8720
Ceiling sections.
metre
19.66
39.00
8721
Perimeter channel
metre
9.60
25.00
8722
Nylon sleeves & wooden screws (40mm)
each
42.00
1.90
8723
Counter sunk ribbed head screw 25mm.
cent
1.76
72.00
9999
Jointing compound
L.S.
20.80
1.49
7018
Joint tape roll
roll
0.19
140.00
9999
Sundries i/c rawl plug, scaffolfing etc.
L.S.
52.00
1.49
9999
Carriage of materials
L.S.
26.00
1.49
LABOUR:0111
Carpenter 1st class
Day
3.80
301.00
0114
Beldar
Day
4.60
247.00
Total:
Add water charges @ 1% on
5631.87
Add C.P & OH @15% on
5688.19
Cost for 11.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 586.15
Rs 586.15

Item Code: 9.134.1.1.1

P/F wire gauge shutters using stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors,
windows etc - 35 mm thick - M.S. pressed butt hinges - Second class teak wood

Code

DSR-12

Description

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

Page 337 of 2298

1190

MATERIALS:
TEAK WOOD (2ND CLASS)
Styles 4x200x9.5x3.5 cm = 0.026 cum +
Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum +
Lock and bottom rails:
2 x 110.5 x 19.7x3.5 cm = 0.0152 cum +
Beading
(2x.312+2X150)x1.2x1.2 cm = 0.001 cum
Total = 0.0464 cum
Add for wastage @ 10% = 0.005 cum
Grand Total : 0.0514 cum or 51.4 cudm
Second class teak wood in planks
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

cum

0.0514

72000.00

Sqm

1.41

760.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Stainless steel wire guage (Grade-304) aperture 1.4mm and

0.50 mm dia wire
Bright finished or black enameled mild steel butt hinges
100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges
50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

2204

Carraige of Timber
LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

cum

0.0514

100.11

Day
Day
Day
Day
L.S.

1.30
0.90
1.05
0.105
33.80

301.00
273.00
247.00
301.00
1.49
Total:
5838.87

8737
0595
0597

0111
0112
0114
0130
9999

Add water charges @ 1% on

Add C.P & OH @15% on

5897.26
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 3139.75
Rs 3139.75

Item Code: 9.134.1.1.2

P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia
wire for doors, windows etc - 35 mm thick - M.S. pressed butt hinges - Kiln seasoned chemically treated hollock wood.

Code

Description

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

MATERIALS:
Hollock wood :
Styles 4x200x9.5x3.5 cm = 0.026 cum +
Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum +
Lock and bottom rails:
2 x 110.5 x 19.7x3.5 cm = 0.0152 cum +
Beading
(2x.312+2X150)x1.2x1.2 cm = 0.001 cum
Total = 0.0464 cum
Add for wastage @ 10% = 0.005 cum
Grand Total : 0.0514 cum or 51.4 cudm

DSR-12

Page 338 of 2298

2505
2204
2504
9999

Hollock wood in planks

Carraige of Timber
Kiln seasoning of timber
Chemical treatment
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

cum
cum
cum
L.S.

0.0514
0.0514
0.0514
8.97

35000.00
100.11
680.00
1.49

8737

Sqm

1.41

760.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Stainless steel wire guage (Grade-304) aperture 1.4mm and

0.50 mm dia wire
Bright finished or black enameled mild steel butt hinges
100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges
50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0111
0112
0114
0130
9999

LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

Day
Day
Day
Day
L.S.

1.30
0.90
1.05
0.105
33.80

301.00
273.00
247.00
301.00
1.49
Total:
3985.39

0595
0597

Add water charges @ 1% on

Add C.P & OH @15% on

4025.24
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2143.07
Rs 2143.05

Item Code: 9.134.1.1.3

P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia
wire for doors, windows etc - 35 mm thick - M.S. pressed butt hinges - Kiln seasoned selected class sesham wood.

Code

1200
2204
2504

8737

DSR-12

Description
MATERIALS:
Sesham wood :
Styles 4x200x9.5x3.5 cm = 0.026 cum +
Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum +
Lock and bottom rails:
2 x 110.5 x 19.7x3.5 cm = 0.0152 cum +
Beading
(2x.312+2X150)x1.2x1.2 cm = 0.001 cum
Total = 0.0464 cum
Add for wastage @ 10% = 0.005 cum
Grand Total : 0.0514 cum or 51.4 cudm
Kiln seasoned selected sheesum wood planks
Carraige of Timber
Kiln seasoning of timber
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

Cum
cum
cum

0.0514
0.0514
0.0514

65000.00
100.11
680.00

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm

0.50 mm dia wire

1.41

760.00

Page 339 of 2298

0595

0637

Bright finished or black enameled mild steel butt hinges 10 No

100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges 10 No
50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm
100 N

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

0111
0112
0114
0130
9999

LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

Day
Day
Day
Day
L.S.

0597

6.00

80.00

2.00

45.00

48.00

50.00

8.00

25.00

1.30
0.90
1.05
0.105
33.80

301.00
273.00
247.00
301.00
1.49
Total:
5514.02

Add water charges @ 1% on

Add C.P & OH @15% on

5569.16
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2965.06
Rs 2965.05

Item Code: 9.134.1.2.1

P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia
wire for doors, windows etc - 35 mm thick - Stainless steel butt hinges - Second class teak wood

Code

1190
2204

8737
8220
8218
8211
8214
0111
0112
0114
0130

DSR-12

Description
MATERIALS:
TEAK WOOD (2ND CLASS)
Styles 4x200x9.5x3.5 cm = 0.026 cum +
Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum +
Lock and bottom rails:
2 x 110.5 x 19.7x3.5 cm = 0.0152 cum +
Beading
(2x.312+2X150)x1.2x1.2 cm = 0.001 cum
Total = 0.0464 cum
Add for wastage @ 10% = 0.005 cum
Grand Total : 0.0514 cum or 51.4 cudm
Second class teak wood in planks
Carraige of Timber
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

Details of Cost for : 2.16 Sqm

Unit
Quantity

cum
cum

0.0514
0.0514

72000.00
100.11

1.41

760.00

6.00

230.00

2.00

125.00

100 N
100 N

48.00
8.00

195.00
95.00

Day
Day
Day
Day

1.30
0.90
1.05
0.105

301.00
273.00
247.00
301.00

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm

0.50 mm dia wire
Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No
12817 marked
Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No
Stainless steel screws 40 mm
Stainless steel screws 20 mm
LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry

Rate

Page 340 of 2298

9999

Sundries

L.S.

33.80

Add water charges @ 1% on

1.49
Total:
6020.07

Add C.P & OH @15% on

6080.27
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 3237.18
Rs 3237.20

Item Code: 9.134.1.2.2

P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia
wire for doors, windows etc - 35 mm thick - Stainles steel butt hinges - Kiln seasoned chemically treated hollock wood.

Code

2505
2204
2504
9999

8737
8220
8218
8211
8214
0111
0112
0114
0130
9999

Description
MATERIALS:
Hollock wood :
Styles 4x200x9.5x3.5 cm = 0.026 cum +
Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum +
Lock and bottom rails:
2 x 110.5 x 19.7x3.5 cm = 0.0152 cum +
Beading
(2x.312+2X150)x1.2x1.2 cm = 0.001 cum
Total = 0.0464 cum
Add for wastage @ 10% = 0.005 cum
Grand Total : 0.0514 cum or 51.4 cudm
Hollock wood in planks
Carraige of Timber
Kiln seasoning of timber
Chemical treatment
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

Details of Cost for : 2.16 Sqm

Unit
Quantity

cum
cum
cum
L.S.

0.0514
0.0514
0.0514
8.97

35000.00
100.11
680.00
1.49

1.41

760.00

6.00

230.00

2.00

125.00

100 N
100 N

48.00
8.00

195.00
95.00

Day
Day
Day
Day
L.S.

1.30
0.90
1.05
0.105
33.80

301.00
273.00
247.00
301.00
1.49
Total:
4166.59

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm

0.50 mm dia wire
Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No
12817 marked
Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No
Stainless steel screws 40 mm
Stainless steel screws 20 mm
LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

Rate

Add water charges @ 1% on

Add C.P & OH @15% on

4208.26
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 2240.51
Rs 2240.50

Page 341 of 2298

Item Code: 9.134.1.2.3

P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia
wire for doors, windows etc - 35 mm thick - Stainles steel butt hinges - Kiln seasoned selected class sesham wood.

Code

1200
2204
2504

8737
8220
8218
8211
8214
0111
0112
0114
0130
9999

Description
MATERIALS:
Sesham wood :
Styles 4x200x9.5x3.5 cm = 0.026 cum +
Top rail 1 x 110.5 x 9.5x3.5 cm = 0.036 cum +
Lock and bottom rails:
2 x 110.5 x 19.7x3.5 cm = 0.0152 cum +
Beading
(2x.312+2X150)x1.2x1.2 cm = 0.001 cum
Total = 0.0464 cum
Add for wastage @ 10% = 0.005 cum
Grand Total : 0.0514 cum or 51.4 cudm
Kiln seasoned selected sheesum wood planks
Carraige of Timber
Kiln seasoning of timber
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

Details of Cost for : 2.16 Sqm

Unit
Quantity

Cum
cum
cum

0.0514
0.0514
0.0514

65000.00
100.11
680.00

1.41

760.00

6.00

230.00

2.00

125.00

100 N
100 N

48.00
8.00

195.00
95.00

Day
Day
Day
Day
L.S.

1.30
0.90
1.05
0.105
33.80

301.00
273.00
247.00
301.00
1.49
Total:
5695.22

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm

0.50 mm dia wire
Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No
12817 marked
Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No
Stainless steel screws 40 mm
Stainless steel screws 20 mm
LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

Rate

Add water charges @ 1% on

Add C.P & OH @15% on

5752.17
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 3062.50
Rs 3062.50

Item Code: 9.134.2.1.1

P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia
wire for doors, windows etc - 30 mm thick - M.S. pressed butt hinges - Second class teak wood

Code

Description

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

MATERIALS:
Teak wood (2nd class)
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum
Beadings -

DSR-12

Page 342 of 2298

(2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum.

Total = 0.040 cum+
Add for wastage @ 10% = 0.004 cum.
Total = 0.44 cum. Say 44 cudm
1190
2204

Second class teak wood in planks

Carraige of Timber
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

cum
cum

0.044
0.044

72000.00
100.11

8737

Sqm

1.41

760.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Stainless steel wire guage (Grade-304) aperture 1.4mm and

0.50 mm dia wire
Bright finished or black enameled mild steel butt hinges
100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges
50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0111
0112
0114
0130
9999

LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

Day
Day
Day
Day
L.S.

1.20
0.80
1.00
0.10
33.80

301.00
273.00
247.00
301.00
1.49
Total:
5234.06

0595
0597

Add water charges @ 1% on

Add C.P & OH @15% on

5286.40
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2814.52
Rs 2814.50

Item Code: 9.134.2.1.2

P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia
wire for doors, windows etc - 30 mm thick - M.S. pressed butt hinges - Kiln seasoned Chemically treated hollock wood.

Code

Description

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

MATERIALS:
Hollock wood :
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum
Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum.
Total = 0.040 cum+
Add for wastage @ 10% = 0.004 cum.
Total = 0.44 cum. Say 44 cudm
2505
2204
2504
9999

DSR-12

Hollock wood in planks

Carraige of Timber
Kiln seasoning of timber
Chemical treatment
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm

cum
cum
cum
L.S.

0.044
0.044
0.044
8.97

35000.00
100.11
680.00
1.49

Page 343 of 2298

Total = 1.41 sqm

8737

Sqm

1.41

760.00

10 No

6.00

80.00

10 No

2.00

45.00

0637

Stainless steel wire guage (Grade-304) aperture 1.4mm and

0.50 mm dia wire
Bright finished or black enameled mild steel butt hinges
100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges
50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm

100 N

48.00

50.00

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

8.00

25.00

0111
0112
0114
0130
9999

LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

Day
Day
Day
Day
L.S.

1.20
0.80
1.00
0.10
33.80

301.00
273.00
247.00
301.00
1.49
Total:
3649.35

0595
0597

Add water charges @ 1% on

Add C.P & OH @15% on

3685.84
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1962.37
Rs 1962.35

Item Code: 9.134.2.1.3

P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia
wire for doors, windows etc - 30 mm thick - M.S. pressed butt hinges - Kiln seasoned selected class of sesham wood.

Code

Description

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

MATERIALS:
Kiln seasoned selected class of sesham wood.
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum
Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum.
Total = 0.040 cum+
Add for wastage @ 10% = 0.004 cum.
Total = 0.44 cum. Say 44 cudm
1200
2204
2504

Kiln seasoned selected sheesum wood planks

Carraige of Timber
Kiln seasoning of timber
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

Cum
cum
cum

0.044
0.044
0.044

65000.00
100.11
680.00

8737

Stainless steel wire guage (Grade-304) aperture 1.4mm and

0.50 mm dia wire
Bright finished or black enameled mild steel butt hinges
100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges
50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm

Sqm

1.41

760.00

10 No

6.00

80.00

10 No

2.00

45.00

100 N

48.00

50.00

0595
0597
0637

DSR-12

Page 344 of 2298

0640

Bright finished or black enameled mild steel screws 20 mm

100 N

0111
0112
0114
0130
9999

LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

Day
Day
Day
Day
L.S.

8.00

25.00

1.20
0.80
1.00
0.10
33.80

301.00
273.00
247.00
301.00
1.49
Total:
4955.98

Add water charges @ 1% on

Add C.P & OH @15% on

5005.54
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2664.99
Rs 2665.00

Item Code: 9.134.2.2.1

P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia
wire for doors, windows etc - 30 mm thick - Stainles steel hinges - Second class teak wood

Code

Description

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

MATERIALS:
Teak wood (2nd class)
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum
Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum.
Total = 0.040 cum+
Add for wastage @ 10% = 0.004 cum.
Total = 0.44 cum. Say 44 cudm
1190
2204

Second class teak wood in planks

Carraige of Timber
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

8737

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm

0.50 mm dia wire
Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No
12817 marked
Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No

8220
8218
8211
8214
0111
0112
0114
0130
9999

Stainless steel screws 40 mm

Stainless steel screws 20 mm
LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

cum
cum

0.044
0.044

72000.00
100.11

1.41

760.00

6.00

230.00

2.00

125.00

100 N
100 N

48.00
8.00

195.00
95.00

Day
Day
Day
Day
L.S.

1.20
0.80
1.00
0.10
33.80

301.00
273.00
247.00
301.00
1.49
Total:
5415.26

Add water charges @ 1% on

Add C.P & OH @15% on

5469.41
Cost for 2.16 Sqm

DSR-12

Page 345 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 2911.95
Rs 2911.95

Item Code: 9.134.1.2.2

P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia
wire for doors, windows etc - 30 mm thick - Stainles steel hinges - Kiln seasoned Chemically treated hollock wood.

Code

Description

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

MATERIALS:
Hollock wood :
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum
Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum.
Total = 0.040 cum+
Add for wastage @ 10% = 0.004 cum.
Total = 0.44 cum. Say 44 cudm
2505
2204
2504
9999

Hollock wood in planks

Carraige of Timber
Kiln seasoning of timber
Chemical treatment
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

8737

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm

0.50 mm dia wire
Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No
12817 marked
Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No

8220
8218
8211
8214
0111
0112
0114
0130
9999

Stainless steel screws 40 mm

Stainless steel screws 20 mm
LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

cum
cum
cum
L.S.

0.044
0.044
0.044
8.97

35000.00
100.11
680.00
1.49

1.41

760.00

6.00

230.00

2.00

125.00

100 N
100 N

48.00
8.00

195.00
95.00

Day
Day
Day
Day
L.S.

1.20
0.80
1.00
0.10
33.80

301.00
273.00
247.00
301.00
1.49
Total:
3830.55

Add water charges @ 1% on

Add C.P & OH @15% on

3868.86
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2059.81
Rs 2059.80

Item Code: 9.134.2.2.3

P/F wire gauge shutters using galvanized stainless steel grade 304 wire gauge - aperture 1.4 mm in both directions 0.63 mm dia
wire for doors, windows etc - 30 mm thick - Stainles steel - Kiln seasoned selected class of sesham wood.

Code

DSR-12

Description

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

Page 346 of 2298

MATERIALS:
Kiln seasoned selected class of sesham wood.
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
Lock and bottom rail 2x110.5x19.7x3cm = 0.013 cum
Beadings (2x312+2x150)x(1.2)x(1.2)cm = 0.001 cum.
Total = 0.040 cum+
Add for wastage @ 10% = 0.004 cum.
Total = 0.44 cum. Say 44 cudm
1200
2204
2504

Kiln seasoned selected sheesum wood planks

Carraige of Timber
Kiln seasoning of timber
Wire guage - 2x160x40 cm = 1.28 sqm
Add wastage @ 10% = 0.13 sqm
Total = 1.41 sqm

8737

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm

0.50 mm dia wire
Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 10 No
12817 marked
Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 No

8220
8218
8211
8214
0111
0112
0114
0130
9999

Stainless steel screws 40 mm

Stainless steel screws 20 mm
LABOUR:
Carpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries

Cum
cum
cum

0.044
0.044
0.044

65000.00
100.11
680.00

1.41

760.00

6.00

230.00

2.00

125.00

100 N
100 N

48.00
8.00

195.00
95.00

Day
Day
Day
Day
L.S.

1.20
0.80
1.00
0.10
33.80

301.00
273.00
247.00
301.00
1.49
Total:
5137.18

Add water charges @ 1% on

Add C.P & OH @15% on

5188.55
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2762.42
Rs 2762.45

Item Code: 9.135.1

P/F fly proof stainless steel grade 304 wire gauge to windows etc using wire gauge with average width of aperture 1.4 mm in both
directions with wire of dia. 0.50 mm - With 2nd class teak wood beading 62X19 mm.

Code

Description

Details of Cost for : 1.54 Sqm

Unit
Quantity

Rate

MATERIALS:
Wire guage - 20x60mm mesh 3.2mm with
1.40 x 1.1 m = 1.54 sqm
Add wastage @ 10% = 0.15 sqm
Total = 1.69 sqm

8737
9999

DSR-12

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm

0.50 mm dia wire
Carriage of wire guage
L.S.
Second class teak wood beading
5mx62mmx19mm = 0.0059 cum

1.69

760.00

1.82

1.49

Page 347 of 2298

1190
2204
0112
0114
9999

Add wastage @ 10% = 0.00059 cum

Total = 0.00649 cum Say 6 cudm
Second class teak wood in planks
Carraige of Timber
LABOUR:
Carpenter 2nd class
Beldar
Sundries

cum
cum

0.006
0.006

72000.00
100.11

Day
Day
L.S.

0.33
0.25
19.76

273.00
247.00
1.49
Total:
1900.99

Add water charges @ 1% on

Add C.P & OH @15% on

1920.00
Cost for 1.54 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1433.77
Rs 1433.75

Item Code: 9.135.2

P/F fly proof stainless steel grade 304 wire gauge to windows etc using wire gauge with average width of aperture 1.4 mm in both
directions with wire of dia. 0.50 mm - With 12 mm mild steel U beading.

Code

Description

Details of Cost for : 1.54 Sqm

Unit
Quantity

Rate

MATERIALS:
Wire guage - 20x60mm mesh 3.2mm with
1.40 x 1.1 m = 1.54 sqm
Add wastage @ 10% = 0.15 sqm
Total = 1.69 sqm

8737
9999
7349
0112
0114
9999

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm

0.50 mm dia wire
Carriage of wire guage
L.S.
12 mm M.S. U beading
metre
LABOUR:
Carpenter 2nd class
Day
Beldar
Day
Sundries
L.S.

1.69

760.00

1.82
5.00

1.49
14.00

0.33
0.25
19.76

273.00
247.00
1.49
Total:
1538.39

Add water charges @ 1% on

Add C.P & OH @15% on

1553.77
Cost for 1.54 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1160.29
Rs 1160.30

Item Code: 9.136

P/F fire resistant door frame of section 143 x 57 mm
Code
8738
9999
9999

Description

Details of Cost for : 9.10 m

Unit
Quantity

MATERIALS:
Factory made door frame fire rated ( 60 minutes) made with
16 SWG G.I. Sheet of section 14
Labour
L.S.
Sundries and carriage
L.S.

9.10

0.00

130.00
4.23

1.49
1.49
Total:
200.00

Add water charges @ 1% on

DSR-12

Rate

Page 348 of 2298

Add C.P & OH @15% on

202.00
Cost for 9.10 m
Rate per One Metre:
Rate as per DSR-12:

Rs 25.53
Rs 1161.45

Item Code: 9.137

P/F 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating consisting of vertical styles, lock rail, top rail 100mm
wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet

Code
8739
9999
9999

Details of Cost for : 3.50 Sqm

Unit
Quantity

Description

MATERIALS:
Fire rated door shuttere made with 16 SWG G.I. sheet( 60 Sqm
minutes) without panel
Labour
L.S.
Sundries and carriage
L.S.

Rate

3.50

4850.00

180.00
10.00

1.49
1.49
Total:
17258.10

Add water charges @ 1% on

Add C.P & OH @15% on

17430.68
Cost for 3.50 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 5727.22
Rs 5727.20

Item Code: 9.138.1

P/F glazing in fire resistant door shuttersetc., with G.I. beading, fire resistant sealant -With clear fire resistant glass panes 6mm thick
having minimum 60 minutes fire resistance.

Code

Details of Cost for : 6.36 Sqm

Unit
Quantity

Description

Rate

MATERIALS:
Glazing area-2x0.70x2.05=2.87 m2
1x1.70x0.60=1.02 sqm
2x0.69x1.79=2.47 sqm
Total =6.36 sqm
8741

8742
8740
8743
9999
9999

DSR-12

Clear fire resistant glass panes 6mm thick (60 minutes)

G.1. 'U' beading
2x2x0.70=2.80 m
2x2x2.05=8.20 m
2x1x1.70=3.40 m
2x1x0.60=1.20 m
2x2x0.69 =2.76 m
2x2x1.79=7.16 m
Total=25.52 m
G.I. U beading of 16 SWG G.I. sheet (zinc coating
>120gm/sqm) with ceramic tape of suitabl
Fire seal putty
Matrix Mineral Board
Labour
Sundries and carriage

Sqm

6.36

19800.00

25.52

247.00

Kg
m
L.S.
L.S.

3.00
76.56
180.00
10.00

Add water charges @ 1% on

675.00
61.85
1.49
1.49
Total:
139274.78

Add C.P & OH @15% on

140667.53

Page 349 of 2298

Cost for 6.36 Sqm

Rate per One Sqm:
Rate as per DSR-12:

Rs 25435.17
Rs 25435.15

Item Code: 9.139

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch

Code
8744
0111
9999

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS:
Panic Bar / latch (Double point)
Labour for fixing
Carpenter 1st class
Sundries (screws and carriage)

Rate

Nos

1.00

5000.00

Day
L.S.

0.17
3.64

301.00
1.49
Total:
5056.59

Add water charges @ 1% on

Add C.P & OH @15% on

5107.16
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 5873.23
Rs 5873.25

Item Code: 9.140.1

P/F plain lining with necessary screws/nuts & bolts/nails including a coat of primer on one face and fixed on wooden /steel frame
work - 12mm thick commercial ply conforming to IS : 1328 BWR type

Code
2413
13.050.01
9999
0156
0114
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS:
12 mm commercial ply
Priming coat:
Applying priming coat : With ready mixed pink or Grey primer
(hard and soft wood)
Sundries and screws etc.,
LABOUR:
Carpenter (average)
Beldar
Sundries and carriage

Rate

Sqm

11.00

580.00

Sqm

10.00

25.83

L.S.

40.10

1.49

Day
Day
L.S.

1.28
1.43
33.56

287.00
247.00
1.49
Total:
7210.32

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

7282.42
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 863.31
Rs 861.05

Item Code: 9.141

P/F PVC Door Frame of size 50x47mm with a wall thickness of 5 mm ( 0.2 mm) made out of single piece extruded PVC profile
including providing EPDM rubber gasket etc
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
8014
Factory made door frame of size 50x47mm with wall m
5.00
450.00
thickness 5 mm made of single piecs extr

DSR-12

Page 350 of 2298

0156
0115
9999

Carpenter (average)
Coolie
Sundries

Day
Day
L.S.

0.15
0.15
11.65

Add water charges @ 1% on

287.00
247.00
1.49
Total:
2347.46

Add C.P & OH @15% on

2370.93
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 545.31
Rs 544.50

Item Code: 9.142.1

35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles - Non decorative finish
(matt finish).
Details of Cost for : 2.38 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
8735
35 mm thick factory made solid panel PVC door shutter of Sqm
2.38
2088.00
single piece extruded profile non
8100
Powder coated M.S. butt hinges 100mm X58mmX1.9mm
10 No
4.00
79.00
0637
Bright finished or black enameled mild steel screws 40 mm
100 N
48.00
50.00
0640

Bright finished or black enameled mild steel screws 20 mm

100 N

0156
0114
9999

Carpenter (average)
Beldar
Sundries

Day
Day
L.S.

8.00

25.00

0.40
0.40
30.35

287.00
247.00
1.49
Total:
5285.86

Add water charges @ 1% on

Add C.P & OH @15% on

5338.72
Cost for 2.38 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2579.63
Rs 2579.65

Item Code: 9.142.2

35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles - decorative finish
(wood grained finish).
Details of Cost for : 2.38 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
8736
35 mm thick factory made solid panel PVC door shutter of Sqm
2.38
2536.00
single piece extruded profile dec
8100
Powder coated M.S. butt hinges 100mm X58mmX1.9mm
10 No
4.00
79.00
0637
Bright finished or black enameled mild steel screws 40 mm
100 N
48.00
50.00
0640

Bright finished or black enameled mild steel screws 20 mm

100 N

0156
0114
9999

Carpenter (average)
Beldar
Sundries

Day
Day
L.S.

8.00

25.00

0.40
0.40
30.35

287.00
247.00
1.49
Total:
6352.10

Add water charges @ 1% on

Add C.P & OH @15% on

6415.62
Cost for 2.38 Sqm

DSR-12

Page 351 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 3099.98
Rs 3100.00

Item Code: 9.143

Providing and Fixing factory made uPVC door frame made of uPVC exturded sections , of size 65 mm x 55 mm .. ..

Code
8745

0156
0114
9999

Details of Cost for : 5.00 m

Unit
Quantity

Description
MATERIALS:
65mm x 55mm x 2mm thick Factory made door frame of PVC
extruded section in white,grey or w
LABOUR:
Carpenter (average)
Beldar
Sundries

Rate

5.00

318.00

Day
Day
L.S.

0.15
0.15
4.68

287.00
247.00
1.49
Total:
1677.07

Add water charges @ 1% on

Add C.P & OH @15% on

1693.84
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 389.58
Rs 389.60

Item Code: 9.144

Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mm x
37mm with wall thickness 2 mm ( 0.2mm) ..
Details of Cost for : 2.38 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
8746
37 mm thick Factory made shutter with style,rails and panels Sqm
2.38
#REF!
of PVC extruded section in wh
LABOUR:
0156
Carpenter (average)
Day
0.40
287.00
0114
Beldar
Day
0.40
247.00
9999
Sundries
L.S.
20.36
1.49
Total:
Add water charges @ 1% on
#REF!
Add C.P & OH @15% on
#REF!
Cost for 2.38 Sqm
Rate per One Sqm:
Rate as per DSR-12:

#REF!
Rs 2703.40

Item Code: 9.145

Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mm x 53 mm, having wall thickness
2.0mm ( 0.2mm) ..
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
8747
75mm x 53mm x 2.0mm thick Factory made door frame of m
5.00
#REF!
PVC extruded section in white,grey or
LABOUR:
0156
Carpenter (average)
Day
0.15
287.00
0114
Beldar
Day
0.15
247.00

DSR-12

Page 352 of 2298

9999

Sundries

L.S.

4.68

Add water charges @ 1% on

1.49
Total:
#REF!

Add C.P & OH @15% on

#REF!
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

#REF!
Rs 400.05

Item Code: 9.146

Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and
laminated section having overall dimension 115mm x 37mm with wall thickness 2 mm ( 0.2mm) ..

Code
8748

0156
0115
9999

Description

Details of Cost for : 2.38 Sqm

Unit
Quantity

MATERIALS:
37 mm thick Factory made fusion welded shutter with Sqm
style,rails and panels of PVC extruded
LABOUR:
Carpenter (average)
Day
Coolie
Day
Sundries
L.S.

Rate

2.38

#REF!

0.40
0.40
20.36

287.00
247.00
1.49
Total:
#REF!

Add water charges @ 1% on

Add C.P & OH @15% on

#REF!
Cost for 2.38 Sqm
Rate per One Sqm:
Rate as per DSR-12:

#REF!
Rs 2790.50

Item Code: 9.147.1.1

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Casement
Window with hinge System - Sash (62 mm x 34 mm)
Details of Cost for : 1.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
8760
uPVC extruded profile casement window Frame (50 mm x 50 m
1.05
#REF!
mm)
Qty = 1.00 + wastage @ 5% = 1.05 m
8775
Steel Galvanised tubular reinforcement for uPVC door/ m
1.05
50.00
window
Qty = 1.00 + Wastage @ 5% = 1.05 m
7390
Neoprene/EPDM rubber gasket
metre
1.05
25.00
Qty = 1.00 + wastage @ 5% = 1.05 m
LABOUR:
For fabrication
0111
Carpenter 1st class
Day
0.10
301.00
0114
Beldar
Day
0.10
247.00
9999
Sundries and carriage of material
L.S.
5.00
1.49
9999
Labour for installation, drilling holes, hire charges drill, L.S.
10.00
1.49
electricity charges, cost of
Total:
Add water charges @ 1% on
#REF!
Add C.P & OH @15% on
#REF!
Cost for 1.00 m

DSR-12

Page 353 of 2298

Rate per One Metre:

Rate as per DSR-12:

#REF!
Rs 373.75

Item Code: 9.147.1.2

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Casement
Window with hinge System - Frame (50 mm x 50mm)
Details of Cost for : 1.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
8761
uPVC extruded profile casement window sash (Style and Rail) m
1.05
#REF!
(62 mm x 34 mm)
Qty = 1.00 + wastage @ 5% = 1.05 m
8775
Steel Galvanised tubular reinforcement for uPVC door/ m
1.05
50.00
window
Qty = 1.00 + Wastage @ 5% = 1.05 m
7390
Neoprene/EPDM rubber gasket
metre
1.05
25.00
Qty = 1.00 + wastage @ 5% = 1.05 m
LABOUR:
For fabrication
0111
Carpenter 1st class
Day
0.10
301.00
0114
Beldar
Day
0.10
247.00
9999
Sundries and carriage of material
L.S.
5.00
1.49
9999
Labour for installation, drilling holes, hire charges drill, L.S.
10.00
1.49
electricity charges, cost of
Total:
Add water charges @ 1% on
#REF!
Add C.P & OH @15% on
#REF!
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

#REF!
Rs 357.90

Item Code: 9.147.1.3

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Casement
Window with hinge System - Mullion (66mm x 50 mm)
Details of Cost for : 1.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
8762
uPVC extruded profile casement window mullion m
1.05
#REF!
(intermediate section) (66mm x 50 mm)
Qty = 1.00 + wastage @ 5% = 1.05 m
8775
Steel Galvanised tubular reinforcement for uPVC door/ m
1.05
50.00
window
Qty = 1.00 + Wastage @ 5% = 1.05 m
7390
Neoprene/EPDM rubber gasket
metre
1.05
25.00
Qty = 1.00 + wastage @ 5% = 1.05 m
LABOUR:
For fabrication
0111
Carpenter 1st class
Day
0.10
301.00
0114
Beldar
Day
0.10
247.00
9999
Sundries and carriage of material
L.S.
5.00
1.49
9999
Labour for installation, drilling holes, hire charges drill, L.S.
10.00
1.49
electricity charges, cost of
Total:
Add water charges @ 1% on
#REF!

DSR-12

Page 354 of 2298

Add C.P & OH @15% on

#REF!
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

#REF!
Rs 394.50

Item Code: 9.147.1.4

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Casement
Window with hinge System -T' Profile (one vertical length in between two shutters) (24mm x 34.5mm)

Code
8763

0111
0114
9999
9999

Description

Details of Cost for : 1.00 m

Unit
Quantity

MATERIALS:
uPVC extruded profile casement window 'T' profile (one m
vertical length in between two shut
Qty = 1.00 + wastage @ 5% = 1.05 m
LABOUR:
For fabrication
Carpenter 1st class
Day
Beldar
Day
Sundries and carriage of material
L.S.
Labour for installation, drilling holes, hire charges drill, L.S.
electricity charges, cost of

Rate

1.05

#REF!

0.02
0.02
3.00
5.00

301.00
247.00
1.49
1.49

Add water charges @ 1% on

Total:
#REF!

Add C.P & OH @15% on

#REF!
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

#REF!
Rs 82.70

Item Code: 9.147.1.5

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Casement
Window with hinge System - Glazing bead (12mm x 18mm)
Details of Cost for : 1.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
8764
uPVC extruded profile casement window glazing bead (12 mm m
1.05
#REF!
x 18 mm)
Qty = 1.00 + wastage @ 5% = 1.05 m
7390
Neoprene/EPDM rubber gasket
metre
1.05
25.00
Qty = 1.00 + wastage @ 5% = 1.05 m
LABOUR:
For fabrication
0111
Carpenter 1st class
Day
0.02
301.00
0114
Beldar
Day
0.02
247.00
9999
Sundries and carriage of material
L.S.
3.00
1.49
9999
Labour for installation, drilling holes, hire charges drill, L.S.
5.00
1.49
electricity charges, cost of
Total:
Add water charges @ 1% on
#REF!
Add C.P & OH @15% on
#REF!
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

#REF!
Rs 113.15

Page 355 of 2298

Item Code: 9.147.2.1

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Casement
Window (With friction hinge & outward opening) - Casement Frame (67mm x 62mm)

Code
8765

8775

0111
0114
9999
9999

Details of Cost for : 1.00 m

Unit
Quantity

Description
MATERIALS:
uPVC extruded profile casement window Frame ( 67 mm x 62
mm)
Qty = 1.00 + wastage @ 5% = 1.05 m
Steel Galvanised tubular reinforcement for uPVC door/
window
Qty = 1.00 + wastage @ 5% = 1.05 m
LABOUR:
For fabrication
Carpenter 1st class
Beldar
Sundries and carriage of material
Labour for installation, drilling holes, hire charges drill,
electricity charges, cost of

Rate

1.05

#REF!

1.05

50.00

0.10
0.10
5.00
10.00

301.00
247.00
1.49
1.49

Add water charges @ 1% on

Total:
#REF!

Day
Day
L.S.
L.S.

Add C.P & OH @15% on

#REF!
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

#REF!
Rs 425.00

Item Code: 9.147.2.2

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Casement
Window (With friction hinge & outward opening) - Casement Window Sash/Mullion (67mm x 75mm ) (style, rail and intermediate
section

Code
8766

8775

0111
0114
9999
9999

Details of Cost for : 1.00 m

Unit
Quantity

Description
MATERIALS:
uPVC extruded profile casement Window Sash/Mullion ( 67
mm x 75 mm)(Style,rail and interme
Qty = 1.00 + wastage @ 5% = 1.05 m
Steel Galvanised tubular reinforcement for uPVC door/
window
Qty = 1.00 + wastage @ 5% = 1.05 m
LABOUR:
For fabrication
Carpenter 1st class
Beldar
Sundries and carriage of material
Labour for installation, drilling holes, hire charges drill,
electricity charges, cost of

Rate

1.05

250.00

1.05

50.00

0.10
0.10
5.00
10.00

301.00
247.00
1.49
1.49

Add water charges @ 1% on

Total:
392.15

Day
Day
L.S.
L.S.

Add C.P & OH @15% on

396.07
Cost for 1.00 m
Rate per One Metre:

DSR-12

Rs 455.48

Page 356 of 2298

Rate as per DSR-12:

Rs 455.50

Item Code: 9.147.2.3

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Casement
Glazing bead (35mm x 18 mm)
Details of Cost for : 1.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
8767
uPVC extruded profile casement window glazing bead (35 mm m
1.05
78.00
x 18 mm)
Qty = 1.00 + wastage @ 5% = 1.05 m
7390
Neoprene/EPDM rubber gasket
metre
1.05
25.00
Qty = 1.00 + wastage @ 5% = 1.05 m
LABOUR:
For fabrication
0111
Carpenter 1st class
Day
0.02
301.00
0114
Beldar
Day
0.02
247.00
9999
Sundries and carriage of material
L.S.
3.00
1.49
9999
Labour for installation, drilling holes, hire charges drill, L.S.
5.00
1.49
electricity charges, cost of
Total:
Add water charges @ 1% on
131.03
Add C.P & OH @15% on
132.34
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 152.19
Rs 152.20

Item Code: 9.147.3.1

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Sliding
Window (Two Track, 2/4 Shutters) - Two Track Sliding Frame (67mm x 52mm)

Code
8768

8775

8772

0111
0114
9999
9999

Details of Cost for : 1.00 m

Unit
Quantity

Description
MATERIALS:
uPVC extruded profile Two Track Sliding frame (67 mm x 52
mm)
Qty = 1.00 + wastage @ 5% = 1.05 m
Steel Galvanised tubular reinforcement for uPVC door/
window
Qty = 1.00 + Wastage @ 5% = 1.05 m
Aluminium Track on bottom rail for uPVC window
Qty = 2.00 + wastage @ 5% = 2.10 m
LABOUR:
For fabrication
Carpenter 1st class
Beldar
Sundries and carriage of material
Labour for installation, drilling holes, hire charges drill,
electricity charges, cost of

Rate

1.05

235.00

1.05

50.00

2.10

20.00

0.10
0.10
5.00
15.00

301.00
247.00
1.49
1.49

Add water charges @ 1% on

Total:
425.85

Day
Day
L.S.
L.S.

Add C.P & OH @15% on

430.11
Cost for 1.00 m
Rate per One Metre:

DSR-12

Rs 494.63

Page 357 of 2298

Rate as per DSR-12:

Rs 494.60

Item Code: 9.147.3.2

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Sliding
Window (Two Track, 2/4 Shutters) - Sliding window Sash (60mm x 44mm)

Code
8769

8775

8773

0111
0114
9999
9999

Details of Cost for : 1.00 m

Unit
Quantity

Description

MATERIALS:
uPVC extruded profile Sliding window Sash (60 mm x 44 mm) m

Rate

1.05

212.00

1.05

50.00

2.10

15.00

0.10
0.10
5.00
15.00

301.00
247.00
1.49
1.49

Add water charges @ 1% on

Total:
391.20

Qty = 1.00 + wastage @ 5% = 1.05 m

Steel Galvanised tubular reinforcement for uPVC door/
window
Qty = 1.00 + Wastage @ 5% = 1.05 m
Wool Pine for uPVC window
Qty = 2.00 + wastage @ 5% = 2.10 m
LABOUR:
For fabrication
Carpenter 1st class
Beldar
Sundries and carriage of material
Labour for installation, drilling holes, hire charges drill,
electricity charges, cost of

Day
Day
L.S.
L.S.

Add C.P & OH @15% on

395.11
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 454.38
Rs 454.40

Item Code: 9.147.3.3

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Sliding
Window (Two Track, 2/4 Shutters) - Sliding Interlock for Window (one vertical length in each shutter)( 45.5 mm x 28 mm)

Code
8770

8773

0111
0114
9999
9999

Description

Details of Cost for : 1.00 m

Unit
Quantity

MATERIALS:
uPVC extruded profile Sliding Interlock for Window (one m
vertical length in each shutter) (
Qty = 1.00 + wastage @ 5% = 1.05 m
Wool Pine for uPVC window
m
Qty = 1.00 + Wastage @ 5% = 1.05 m
LABOUR:
For fabrication
Carpenter 1st class
Day
Beldar
Day
Sundries and carriage of material
L.S.
Labour for installation, drilling holes, hire charges drill, L.S.
electricity charges, cost of

Rate

1.05

45.00

1.05

15.00

0.05
0.05
3.00
5.00

301.00
247.00
1.49
1.49

Add water charges @ 1% on

Total:
102.32

Add C.P & OH @15% on

103.34
Cost for 1.00 m

DSR-12

Page 358 of 2298

Rate per One Metre:

Rate as per DSR-12:

Rs 118.84
Rs 118.85

Item Code: 9.147.3.4

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Sliding
Window (Two Track, 2/4 Shutters) - Sliding Glazing bead (35 mm x 18 mm)

Code
8767

7390

0111
0114
9999
9999

Details of Cost for : 1.00 m

Unit
Quantity

Description
MATERIALS:
uPVC extruded profile casement window glazing bead (35 mm
x 18 mm)
Qty = 1.00 + wastage @ 5% = 1.05 m
Neoprene/EPDM rubber gasket
Qty = 1.00 + Wastage @ 5% = 1.05 m
LABOUR:
For fabrication
Carpenter 1st class
Beldar
Sundries and carriage of material
Labour for installation, drilling holes, hire charges drill,
electricity charges, cost of

Rate

1.05

78.00

metre

1.05

25.00

Day
Day
L.S.
L.S.

0.02
0.02
3.00
5.00

301.00
247.00
1.49
1.49

Add water charges @ 1% on

Total:
131.03

Add C.P & OH @15% on

132.34
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 152.19
Rs 152.20

Item Code: 9.147.4.1

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Sliding Door
(Two Track, 2/4 Shutters) - Two Track Sliding Frame (67mm x 52mm)

Code
8768

8775

8772

0111
0114
9999
9999

Details of Cost for : 1.00 m

Unit
Quantity

Description
MATERIALS:
uPVC extruded profile Two Track Sliding frame (67 mm x 52
mm)
Qty = 1.00 + wastage @ 5% = 1.05 m
Steel Galvanised tubular reinforcement for uPVC door/
window
Qty = 1.00 + Wastage @ 5% = 1.05 m
Aluminium Track on bottom rail for uPVC window
Qty = 1.00 + wastage @ 5% = 1.05 m
LABOUR:
For fabrication
Carpenter 1st class
Beldar
Sundries and carriage of material
Labour for installation, drilling holes, hire charges drill,
electricity charges, cost of

Rate

1.05

235.00

1.05

50.00

1.05

20.00

0.10
0.10
10.00
15.00

301.00
247.00
1.49
1.49

Add water charges @ 1% on

Total:
412.30

Day
Day
L.S.
L.S.

Add C.P & OH @15% on

416.42
Cost for 1.00 m

DSR-12

Page 359 of 2298

Rate per One Metre:

Rate as per DSR-12:

Rs 478.88
Rs 478.90

Item Code: 9.147.4.2

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Sliding Door
(Two Track, 2/4 Shutters) - Sliding Door Sash (80mm x 44mm)

Code
8771

8775

8773
7390

0111
0114
9999
9999

Details of Cost for : 1.00 m

Unit
Quantity

Description
MATERIALS:
uPVC extruded profile Sliding Door Sash (80 mm x 44 mm)

Rate

1.05

275.00

1.05

50.00

2.10

15.00

metre

1.05

25.00

0.14
0.14
5.00
15.00

301.00
247.00
1.49
1.49

Add water charges @ 1% on

Total:
505.52

Qty = 1.00 + wastage @ 5% = 1.05 m

Steel Galvanised tubular reinforcement for uPVC door/
window
Qty = 1.00 + Wastage @ 5% = 1.05 m
Wool Pine for uPVC window
Qty = 2.00 + Wastage @ 5% = 2.10 m
Neoprene/EPDM rubber gasket
Qty = 1.00 + wastage @ 5% = 1.05 m
LABOUR:
For fabrication
Carpenter 1st class
Beldar
Sundries and carriage of material
Labour for installation, drilling holes, hire charges drill,
electricity charges, cost of

Day
Day
L.S.
L.S.

Add C.P & OH @15% on

510.58
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 587.17
Rs 587.15

Item Code: 9.147.4.3

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Sliding Door
(Two Track, 2/4 Shutters) -Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm)

Code
8770

8773

0111
0114
9999
9999

DSR-12

Description

Details of Cost for : 1.00 m

Unit
Quantity

MATERIALS:
uPVC extruded profile Sliding Interlock for Window (one m
vertical length in each shutter) (
Qty = 1.00 + wastage @ 5% = 1.05 m
Wool Pine for uPVC window
m
Qty = 1.00 + Wastage @ 5% = 1.05 m
LABOUR:
For fabrication
Carpenter 1st class
Day
Beldar
Day
Sundries and carriage of material
L.S.
Labour for installation, drilling holes, hire charges drill, L.S.
electricity charges, cost of

Rate

1.05

45.00

1.05

15.00

0.05
0.05
3.00
5.00

301.00
247.00
1.49
1.49

Add water charges @ 1% on

Total:
102.32

Page 360 of 2298

Add C.P & OH @15% on

103.34
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 118.84
Rs 118.85

Item Code: 9.147.4.4

Providing and Fixing, uPVC factory made, white colour casement/sliding window and door made of extruded profiles - Sliding Door
(Two Track, 2/4 Shutters) -Sliding Glazing bead (35 mm x 18 mm)

Code
8767

7390

0111
0114
9999
9999

Details of Cost for : 1.00 m

Unit
Quantity

Description
MATERIALS:
uPVC extruded profile casement window glazing bead (35 mm
x 18 mm)
Qty = 1.00 + wastage @ 5% = 1.05 m
Neoprene/EPDM rubber gasket
Qty = 1.00 + Wastage @ 5% = 1.05 m
LABOUR:
For fabrication
Carpenter 1st class
Beldar
Sundries and carriage of material
Labour for installation, drilling holes, hire charges drill,
electricity charges, cost of

Rate

1.05

78.00

metre

1.05

25.00

Day
Day
L.S.
L.S.

0.02
0.02
3.00
5.00

301.00
247.00
1.49
1.49

Add water charges @ 1% on

Total:
131.03

Add C.P & OH @15% on

132.34
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 152.19
Rs 152.20

Item Code: 9.148.1

P/F stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows with necessary stainless steel screws etc. 200X19X1.9MM
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Rate
MATERIALS:
8755
Stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for Nos
10.00
225.00
uPVC windows
8647
Stainless steal screws 30mm x4mm.
cent
0.40
29.00
9999
Carriage
L.S.
2.73
1.49
0112
Carpenter 2nd class
Day
0.14
273.00
0114
Beldar
Day
0.14
247.00
Total:
Add water charges @ 1% on
2338.47
Add C.P & OH @15% on
2361.85
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 271.61
Rs 271.60

Item Code: 9.148.2

DSR-12

Page 361 of 2298

P/F stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows with necessary stainless steel screws etc. 250X19X1.9mm
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Rate
MATERIALS:
8756
Stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for Nos
10.00
275.00
uPVC windows
8647
Stainless steal screws 30mm x4mm.
cent
0.40
29.00
9999
Carriage
L.S.
2.73
1.49
0112
Carpenter 2nd class
Day
0.14
273.00
0114
Beldar
Day
0.14
247.00
Total:
Add water charges @ 1% on
2838.47
Add C.P & OH @15% on
2866.85
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 329.69
Rs 329.70

Item Code: 9.148.3

P/F stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows with necessary stainless steel screws etc.
300X19X1.9mm
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Rate
MATERIALS:
8757
Stainless steel friction hinge of size 300 mm x 19 x 1.9 mm for Nos
10.00
350.00
uPVC windows
8647
Stainless steal screws 30mm x4mm.
cent
0.40
29.00
9999
Carriage
L.S.
2.73
1.49
0112
Carpenter 2nd class
Day
0.14
273.00
0114
Beldar
Day
0.14
247.00
Total:
Add water charges @ 1% on
3588.47
Add C.P & OH @15% on
3624.35
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 416.80
Rs 416.80

Item Code: 9.148.4

P/F stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows with necessary stainless steel screws etc. -350
mm x 19 x 1.9 mm
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Rate
MATERIALS:
8758
Stainless steel friction hinge of size 350 mm x 19 x 1.9 mm for Nos
10.00
400.00
uPVC windows
8647
Stainless steal screws 30mm x4mm.
cent
0.40
29.00
9999
Carriage
L.S.
2.73
1.49
0112
Carpenter 2nd class
Day
0.14
273.00
0114
Beldar
Day
0.14
247.00
Total:
Add water charges @ 1% on
4088.47
Add C.P & OH @15% on
4129.35
Cost for 10.00 Nos

DSR-12

Page 362 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 474.88
Rs 474.90

Item Code: 9.148.5

P/F stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows with necessary stainless steel screws etc. -400
mm x 19 x 1.9mm
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Rate
MATERIALS:
8759
Stainless steel friction hinge of size 400 mm x 19 x 1.9 mm for Nos
10.00
500.00
uPVC windows
8647
Stainless steal screws 30mm x4mm.
cent
0.40
29.00
9999
Carriage
L.S.
2.73
1.49
0112
Carpenter 2nd class
Day
0.14
273.00
0114
Beldar
Day
0.14
247.00
Total:
Add water charges @ 1% on
5088.47
Add C.P & OH @15% on
5139.35
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 591.03
Rs 591.05

Item Code: 9.149

Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary
screws etc.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Rate
MATERIALS:
8750
Zinc alloy (white powder coated) casement handle for uPVC Nos
10.00
150.00
windows
9999
Carriage
L.S.
4.42
1.49
9999
Sundries (screws)
L.S.
3.00
1.49
LABOUR:
0156
Carpenter (average)
Day
0.125
287.00
Total:
Add water charges @ 1% on
1546.94
Add C.P & OH @15% on
1562.41
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 179.68
Rs 179.70

Item Code: 9.150

Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc.

Code
8751
9999
9999

DSR-12

Description

Details of Cost for : 10.00 Nos

Unit
Quantity

MATERIALS:
Zinc alloy (white powder coated) Touch Lock for uPVC Nos
windows
Carriage
L.S.
Sundries (Screws)
L.S.
LABOUR:

Rate

10.00

100.00

4.42
3.00

1.49
1.49

Page 363 of 2298

0156

Carpenter (average)

Day

0.125

Add water charges @ 1% on

287.00
Total:
1046.94

Add C.P & OH @15% on

1057.41
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 121.60
Rs 121.60

Item Code: 9.151

Providing and fixing steel roller for uPVC sliding window with necessary screws etc
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
MATERIALS:
8752
Zinc alloy rollers for uPVC windows
Nos
10.00
9999
Carriage
L.S.
4.42
9999
Sundries (screws)
L.S.
3.00
LABOUR:
0156
Carpenter (average)
Day
0.125
Add water charges @ 1% on

Rate
50.00
1.49
1.49
287.00
Total:
546.94

Add C.P & OH @15% on

552.41
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 63.53
Rs 63.55

Item Code: 9.152

Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
MATERIALS:
8753
Zinc alloy rollers for uPVC door
Nos
10.00
9999
Carriage
L.S.
4.42
9999
Sundries (screws)
L.S.
3.00
LABOUR:
0156
Carpenter (average)
Day
0.125
Add water charges @ 1% on

Rate
80.00
1.49
1.49
287.00
Total:
846.94

Add C.P & OH @15% on

855.41
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 98.37
Rs 98.35

Item Code: 9.153

Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete.

Code
8754
9999

DSR-12

Description

Details of Cost for : 10.00 Nos

Unit
Quantity

MATERIALS:
Zinc alloy (white powder coated) casement lock for uPVC Nos
windows
Carriage
L.S.

Rate

10.00

100.00

4.42

1.49

Page 364 of 2298

9999
0156

Sundries (screws)
LABOUR:
Carpenter (average)

L.S.

3.00

1.49

Day

0.125

287.00
Total:
1046.94

Add water charges @ 1% on

Add C.P & OH @15% on

1057.41
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 121.60
Rs 121.60

Item Code: 9.154

Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls,
ceiling in grid pattern ..
Details of Cost for : 58.35 Kg
Code
Description
Unit
Quantity
Rate
Details of Cost for 2.4x2.4m panel = 5.76 sqm or 58.35 kg
MATERIALS:
M.S Pipe section @ 10.13 kg/sqm = 58.35 kg +
Wastage @ 5% = 2.92 kg
Total = 61.27 kg
4009
Mild steel tubes hot finished welded type
kilog
61.27
48.00
8776
Stainless steel dash fastener of 8 mm dia and 75 mm long bolt Nos
20.00
20.00

13.050.03

0116
0103
0114
0100
9999

Steel Primer
5x2x2.40x0.05x4 =4.80 sqm
Applying priming coat : With ready mixed red oxide zinc Sqm
chromate primer on steel galvanise
LABOUR:
Fitter (grade 1)
Day
Blacksmith 2nd class
Day
Beldar
Day
Bandhani
Day
Sundries
L.S.

4.80

20.72

0.40
0.53
1.23
0.06
33.56

301.00
273.00
247.00
260.00
1.49
Total:
3975.46

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

4015.21
Cost for 58.35 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 80.84
Rs 80.85

Item Code: 10.1

Structural steel work in single section fixed with or without connecting plate including applying a priming
primer. ...
Details of Cost for : 100.00 Kg
Code
Description
Unit
Quantity
MATERIALS
Steel = 1.00q
Add wastage @ 5% = 0.05q = 1.05q
1007
Steel
quint
1.05
2205
Carriage
tonne
0.105
LABOUR:
0116
Fitter (Grade I)
Day
0.50
0103
Blacksmith 2nd class
Day
0.75
0114
Beldar
Day
1.00

DSR-12

coat of approved steel

Rate

4250.00
77.87
301.00
273.00
247.00

Page 365 of 2298

13.050.03
9999

Applying priming coat : With ready mixed red oxide zinc

chromate primer on steel galvanise
Sundries
L.S.

3.00

20.72

20.67

1.49
Total:
5103.73

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

5154.77
Cost for 100.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 59.90
Rs 59.90

Item Code: 10.2

Structural steel work riveted, bolted or welded in builtup sections, trusses etc ..and applying a priming coat steel primer ..

Code

1007

1009

1010

DSR-12

Description
MATERIALS(i) Principal rafter (T-iron)
100x 100x 10mm @ 15kg/m = 142.50Kg+
Struts (angles)40x40x6mm
2xl.35=2.70m @ 3.5kg/m = 9.45kg
= 15l.95kg+
Add wastage @ 5% = 7.60kg
= 159.55kg. = 1.60q
Principal rafter (T-iron)
(ii) Ties (flats) 50x12mm
2x2.7 = 5.4m @4.7kg/m = 25.38kg+
Ties central (flats) 50x10mm
1x2.80 = 2.8m @3.90kg/m = 10.92kg.+
Braces (flats)40x 10mm
2x1.84 = 3.68m @3.9kg/m = 14.35kg.
= 50.65kg+
Add wastage @ 5% = 2.53kg.
= 53.18kg. =0.53q
Ties (flats) 50x12mm
(iii) Gusset plates 10mm thick
1x0.74x0.35m = 0.259sqm.+
shoe 4x0.46x0.46 = 0.845sqm.
= 1.104 sqm.
1.104sqm.@ 78.4kg/m = 86.55kg.
12mm plates at the point of principal rafter
and strut2x0.3x0.2 = 0.12sqm.+
Tie beam, brace and strut2x0.5x0.3 = 0.30sqm.+
Sole plates2x0.46x0.46 = 0.42sqm.+
Anchor plate2x0.46x0.1 =0.09sqm.
= 0.93 sqm.
Say 1.00 sqm.
1.00 sqm. @ 94.4kg/m = 94.40kg.
= 180.95kg.
Add wastage @ 5% = 9.05kg.
= 190.00kg or 1.90q
Gusset plates 10mm thick
(iv) 16mm dia. 50mm long rivets = 56 nos.+
Add wastage @ 5 % = 2.8 nos.

Details of Cost for : 395.00 Kg

Unit
Quantity

Rate

quint

1.60

4250.00

quint

0.53

4150.00

quint

1.90

4500.00

Page 366 of 2298

1020

1221
2205

0116
0103
0139
0114
0100

13.050.03
9999

= 58.8 nos.
16mm dia. 50mm long rivets
quint
(v) 20mm dia. holding down bolts
4 Nos.x460mm = 1840mm +
Add wastage @ 5% = 92mm
= 1932 mm
20mm dia. Holding down bolts
quint
Carriage of
tonne
steel-(0.160+0.053+0.091 +0.099+0.007+0.005)
=0.415 tonne
LABOURFitter (Grade I)
Day
Blacksmith 2nd class
Day
Beldar (Special)
Day
Beldar
Day
Bandhani
Day
Applying priming coatT.Iron 9.5x0.4 = 3.80sqm.+
Struts 2.70x0.16 = 0.43sqm.+
Ties 5.4x0.124 = 0.67sqm.+
Braces 2x 1.84x0.12 = 0.44 sqm.+
Ties 2.8x0.12 = 0.34 sqm.
= 5.68 sqm.
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise
Sundries
L.S.

0.0684

4800.00

0.0529
0.415

5400.00
77.87

2.70
3.60
5.40
3.60
0.44

301.00
273.00
260.00
247.00
260.00

5.68

20.72

80.73

1.49
Total:
22519.19

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

22744.38
Cost for 395.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 66.52
Rs 66.50

Item Code: 10.3

P/F in position collapsible steel shutters - vertical channels 20x10x2mm -braced with flat iron diagonals 20x5mm - etc

Code

1007

1007

DSR-12

Description
Details of cost for a gate
2.4mxl.5m = 3.6sqm.
MATERIALSM.S. channels 18 Nos. on both sides
20xl0x2mm @ 0.56kg/m
2x18x2.4 = 86.40m+
Add wastage @ 10% = 8.64m
= 95.04m
[email protected]/m =53.22kg=0.53q
M.S. Tee-40x40x6mm
for bottom-1.5 70m+
for top = 1.725m
=3.295m Say 3.3m
3.3m @ 3.5kg/m = 11.55kg+
Add wastage @ 10% = 1.155 Kg.
= 12.705Kg. SayO.I3q
M.S. Tee
20mmx5mm flat iron diagonals 4 Nos.
4x32x0.5334 = 68.275m

Details of Cost for : 3.60 Sqm

Unit
Quantity

Rate

quint

0.53

4250.00

quint

0.13

4250.00

Page 367 of 2298

1008
2205
9999
9999
4013

13.050.03

0116
0102
0103
0123
0124
0114
9999

68.275m @ 0.8kg/m = 54.62kg+

Add wastage @ 10% = 5.46kg
= 60.08kg = 0.60q
Flat iron diagonals
quint
Carriage-(0.053+0.013+0.060=0.126 tonne)
tonne
Cost of rivets fixing hooks and washers
L.S.
Cost of locking arrangements and handles
L.S.
Pulleys 40mm dia.
each
Priming coatChannel - 36x0.076x2.4 = 6.57sqm.+
Tee-0.16x3.3=0.53sqm.+
Flats-0.05x68 = 3.40sqm. = 10.50sqm.
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise
LABOURFitter (Grade I)
Day
Blacksmith 1st class
Day
Blacksmith 2nd class
Day
Mason 1st class
Day
Mason 2nd class
Day
Beldar
Day
Sundries
L.S.

0.60
0.126
269.10
67.34
10.00

4200.00
77.87
1.49
1.49
25.00

10.50

20.72

3.00
6.00
6.00
0.50
0.50
8.00
161.46

301.00
301.00
273.00
301.00
273.00
247.00
1.49
Total:
12936.69

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

13066.06
Cost for 3.60 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 4234.31
Rs 4234.25

Item Code: 10.4

P/F 1mm thick MS sheet sliding-shutters -frame and diagonal braces of 40x40x6mm angle iron, 3mm MS gusset plates, 25mm dia
pulley, .. ..
Details of Cost for : 5.76 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS(i) M.S. sheet lmm thick
5.76sqm. @ 7.85kg/sqm. = 45.2I6kg.+
Add wastage @ 10% = 4.522kg.
= 49.738kg = 0.497 q
1013
M.S. Sheet 2x5.76= 11.52+
quint
0.497
4600.00
(ii) Gusset plates 3.00mm thick
Area of one gusset plates
0.3x0.04 = 0.0120+
1/2x0.26(0.04+0.3) = 0.0442
= 0.0562sqm.+
8x0.0562 = 0.4496sqm.+
2x22/7x1/4x0.3x0.3=0.1414sqm.
= 0.5910sqm.
[email protected]/sqm.= 13.92kg.+
Add wastage @ 10% = 1.39kg
- 15.31kg. or 0.153q
1010
Gusset plates
quint
0.153
4500.00
(iii) Angle iron
40x40x6mm @ 3.5kg/m
Sides-4x2.4=9.6m+
Bottom & top 4xi.2 = 4.8m+
Diagonals-2x2.5=5.0m+

DSR-12

Page 368 of 2298

1007

1007
2205
9999
0969
9999
9999
9999

13.050.03

0116
0102
0103
0114
0123
0124
9999

2x2.45 = 4.9m+
Top and bottom guides
2x4.8 = 9.6m
Top guide supports
7x0.8 = 2.1m
= 36.0m
36m @3.5kg. per m. = 126kg.+
Add wastage 10%= 12.6kg.
= 138.6kg. or 1.39q
Angle iron
quint
(iv)Channel 25x25x6mm @ 3.05kg/m
Bottom-2.4m : 2.4x3.05
Channel 40x40x6mm @ 5.56kg/m
0.5x5.56 = 2.78kg.
= 10.1kg.+
Add wastage @ 10% = 1.101 kg.
= 11.11kg. or 0.11q
Channel
quint
Carriage-(0.0497+0.015+0.139+0.11 =0.2157 tonne)
tonne
(v) Pully guide blocks including drilling holes
L.S.
(vi) 25mm dia. Pully
each
(vii) Handles and locking arrangements
L.S.
(viii) Bolts and rivets
L.S.
(ix)Cement concrete
L.S.
Priming coatM.S. Sheet 2x5.76 = 11.52+
Angle iron 0.16x36 = 5.76+
Channel-0.15x2.4=0.36+
0.24x0.5=0.12
= 17.76 Say 18.0sqm
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise
LABOURFitter (Grade 1)
Day
Blacksmith 1st class
Day
Blacksmith 2nd class
Day
Beldar
Day
Mason 1st class
Day
Mason 2nd class
Day
Sundries
L.S.

1.39

4250.00

0.11
0.216
269.10
8.00
167.75
269.10
13.52

4250.00
77.87
1.49
30.00
1.49
1.49
1.49

18.00

20.72

2.00
3.00
4.00
4.00
0.06
0.06
161.46

301.00
301.00
273.00
247.00
301.00
273.00
1.49
Total:
14538.55

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

14683.94
Cost for 5.76 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2996.44
Rs 2996.40

Item Code: 10.5.1

P/F 1mm thick MS sheet door with frame of 40x40x6mm angle iron and 3mm MS gusset plates .. ..Using MS angels 40x40x6mm for
diagonal braces.
Details of Cost for : 5.76 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS(i) M.S. sheet lmm thick
5.76sqm. @ 7.85kg/sqm. = 45.216kg.+
Add wastage @ 10% = 4.522kg.
= 49.738kg = 0.497 q

DSR-12

Page 369 of 2298

1013

1013

1007
2205
1036
1222
1019
9999
9999

13.050.03

0116
0102
0103
0123
0124
0114
9999

M.S. Sheet 2x5.76= 11.52+

quint
(ii) Gusset plates 3.00mm thick
Area of one gusset plates
0.3x0.04 = 0.0120+
1/2x0.26(0.04+0.3) = 0.0442
= 0.0562sqm.+
8x0.0562 = 0.4496sqm.+
2x22/7xl/4x0.3x0.3=0.1414sqm.
= 0.5910sqm.
[email protected]/sqm.= l3.92kg.+
Add wastage @ 10% = 1.39kg
= 15.31kg. or 0.153q
Gusset plates
quint
(iii) Angle iron:40x40x6mm @3.5kg/m
Sides-4x2.40 = 9.6m+
Top & bottom-4xl.20=4.8m+
Diagonals-2x2.5=5.0m+
2x2.45 = 4.9m+
= 24.30m+
Add wastage @ 10% = 2.43m =26.73m
26.73m @ 3.5kg. per m. = 93.56kg=0.936q
Angle iron
quint
Carriage-(0.0497+0.0153+0.0936 tonne) =
tonne
0.1586 t
(iv) Pintles including welded pin
each
M.S. cleats with bolts an nuts to rest on pintles
each
Hooks
each
Locking arrangements and handles
L.S.
Rivets
L.S.
Priming coatM.S. sheet = 11.52
Angle iron-0.16x24.3 = 3.89
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise
LABOURFitter (Grade I)
Day
Blacksmith 1st class
Day
Blacksmith 2nd class
Day
Mason 1st Class
Day
Mason 2nd class
Day
Beldar
Day
Sundries
L.S.

0.497

4600.00

0.153

4600.00

0.936
0.1586

4250.00
77.87

4.00
4.00
2.00
167.70
269.10

35.00
110.00
30.00
1.49
1.49

15.41

20.72

2.00
3.00
4.00
0.06
0.06
5.00
161.46

301.00
301.00
273.00
301.00
273.00
247.00
1.49
Total:
12378.20

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

12501.98
Cost for 5.76 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2551.49
Rs 2551.45

Item Code: 10.5.2

P/F 1mm thick MS sheet door - 40x40x6mm angle frame - Using flats 30x6mm for diagonal braces and central cross piece

Code

Description

Details of Cost for : 5.76 Sqm

Unit
Quantity

Rate

MATERIALS(i) M.S. sheet lmm thick

5.76sqm. @ 7.85kg/sqm. = 45.216kg.

DSR-12

Page 370 of 2298

1013

1010

1007

1008
2205
1036
1222
1019
9999
9999

13.050.03

0116
0102
0103
0123
0124
0114
9999

Add wastage @ 10% = 4.522kg.

= 49.738kg = 0.497 q
M.S. Sheet
quint
(ii) Gussets plates-3.00mm thick vide (ii) in
item 10.4 = 0.5910sqm.
at mid height = 4x0.0528 = 0.2112sqm.
= 0.8022sqm.
Add wastage @ 10% = 0.0802sqm.
=0.8824sqm. @ 23.55 kg/sqm =20.78 kg
= 0.2078 qtl
Gussets plates-3.00mm thick
quint
(iii) Angle iron:40x40x6mm @3.5kg/m
Sides-4x2.40 = 9.6m
Top & bottom-4xl.20=4.8m = 14.40m
Add wastage @ 10% = 1.44m = 15.84m
15.84m @ 3.5kg. per m..= 55.44kg =0.554qtl
Angle iron
quint
(iv) Flats 30x6mm @1.4kg/m
4x2.45=9.80m+
2xl.20=2.40m
= 12.20m+
Add wastage @ 10% = 1.22m
= 13.42m
13.42m @ 1.4kg. per m. = 18.788kg. = 0.188q
Flats
quint
Carriage of (i) (ii) and
tonne
(iv)-0.0497+0.0208+0.0554+0.0188=0.1447 tonne
Pintles including welded pin
each
M.S. Cleats with bolts and nuts to rest on pintles
each
Hooks
each
Locking arrangements and handles
L.S.
Rivets
L.S.
Applying priming coatM.S. sheet = 11.52
Angle iron-0.16x24.3 = 3.89
0.16x14.40 = 2.30+
Flats 0.072x12.2 = 0.88
= 14.70sqm.
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise
LABOURFitter (Grade I)
Day
Blacksmith 1st class
Day
Blacksmith 2nd class
Day
Mason 1st Class
Day
Mason 2nd class
Day
Beldar
Day
Sundries
L.S.

0.497

4600.00

0.2078

4500.00

0.554

4250.00

0.188
0.1447

4200.00
77.87

4.00
4.00
2.00
167.70
269.10

35.00
110.00
30.00
1.49
1.49

14.70

20.72

2.00
3.00
4.00
0.06
0.06
5.00
161.46

301.00
301.00
273.00
301.00
273.00
247.00
1.49
Total:
11774.52

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

11892.27
Cost for 5.76 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2427.20
Rs 2427.15

Item Code: 10.6.1

DSR-12

Page 371 of 2298

S/F rolling shutters required size M.S. laths including p/f 27.5cm long wire springs M.S. top cover -80x1.25mm M.S. laths with 1.25
mm thick top cover.
Details of Cost for : 7.50 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
0973
Rolling shutter - 80 x 1.25mm laths (machined rolled)
sqm
7.50
1150.00
0974
Top cover for rolling shutters - 1.25mm thick
metre
2.50
550.00
0975
Coiled type spring
each
1.00
250.00
9999
Carriage
L.S.
53.82
1.49
LABOUR:
0116
Fitter grade-I
Day
2.55
301.00
0114
Beldar
Day
2.55
247.00
0123
Mason I class
Day
0.12
301.00
0124
Mason II class
Day
0.12
273.00
9999
Sundries
L.S.
60.58
1.49
Total:
Add water charges @ 1% on
11886.73
Add C.P & OH @15% on
12005.60
Cost for 7.50 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1840.86
Rs 1840.85

Item Code: 10.6.2

S/F rolling shutters required size M.S. laths including p/f 27.5cm long wire springs M.S. top cover -80x1.20mm M.S. laths with 1.20
mm thick top cover.
Details of Cost for : 7.50 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
7045
Rolling shutters of 80x1.00mm laths
sqm
7.50
1010.00
7047
Top cover for rolling shutter 1.00mm thick
metre
2.50
305.00
0975
Coiled type spring
each
1.00
250.00
9999
Carriage
L.S.
53.82
1.49
LABOUR:
0116
Fitter grade-I
Day
2.55
301.00
0114
Beldar
Day
2.55
247.00
0123
Mason I class
Day
0.12
301.00
0124
Mason II class
Day
0.12
273.00
9999
Sundries
L.S.
60.58
1.49
Total:
Add water charges @ 1% on
10224.23
Add C.P & OH @15% on
10326.47
Cost for 7.50 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1583.39
Rs 1583.40

Item Code: 10.6.3

S/F rolling shutters required size M.S. laths including p/f 27.5cm long wire springs M.S. top cover -80x0.90mm M.S. laths with
0.90mm thick top cover.
Details of Cost for : 7.50 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
7044
Rolling shutter - 80x0.90 mm M.S. laths
sqm
7.50
930.00
7046
Top cover for rolling shutters - 0.90mm thick
metre
2.50
270.00
0975
Coiled type spring
each
1.00
250.00

DSR-12

Page 372 of 2298

9999
0116
0114
0123
0124
9999

Carriage
LABOUR:
Fitter grade-I
Beldar
Mason I class
Mason II class
Sundries

L.S.

53.82

1.49

Day
Day
Day
Day
L.S.

2.55
2.55
0.12
0.12
60.58

301.00
247.00
301.00
273.00
1.49
Total:
9536.73

Add water charges @ 1% on

Add C.P & OH @15% on

9632.10
Cost for 7.50 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1476.92
Rs 1476.90

Item Code: 10.7

Providing and fixing ball bearing for rolling _x000D_
Code
0976
9999

Description
Ball bearing (for rolling shutter)
Sundries

Details of Cost for : 1.00 No.

Unit
Quantity
each
1.00
L.S.
26.91
Add water charges @ 1% on

Rate
330.00
1.49
Total:
370.10

Add C.P & OH @15% on

373.80
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 429.87
Rs 429.85

Item Code: 10.8.1

Extra for providing mechanical device operation for rolling shutters : Exceeding 10.00 sqm upto 16.80sqm in the area. _x000D_
_x000D_
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
0977
Extra for mechanical devices for operatingrolling shutters : sqm o
1.00
520.00
exceeding 10.00 sq.m - upto 1
9999
Sundries
L.S.
13.52
1.49
Total:
Add water charges @ 1% on
540.14
Add C.P & OH @15% on
545.54
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 627.37
Rs 627.35

Item Code: 10.8.2

Extra for providing mechanical device operation for rolling shutters : Exceeding 16.80sqm in area.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
0978
Extra for mechanical devices for operating rolling shutter - sqm o
1.00
exceeding 16.8sqmin area
9999
Sundries
L.S.
13.52
Add water charges @ 1% on

DSR-12

Rate
550.00
1.49
Total:
570.14

Page 373 of 2298

Add C.P & OH @15% on

575.84
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 662.22
Rs 662.20

Item Code: 10.10.1

Fixing standard steel glazed doors, windows and ventilators in walls including fixing float glass panes with glazing clips (Only
concrete and labour for fixing) - Fixing with 15x3 mm lugs 10 cm long embedded in CC block

Code

04.002.05

0102
0123
0124
0114
9999

Description

Details of Cost for : 15.00 Kg

Unit
Quantity

MATERIALS:
Cement Concrete Blocks 15x10x10cm=0.009 cum
P/L CC walls, columns, string courses, coping, bed blocks, Cum
window sills etc. up to floor f
LABOUR:
Blacksmith 1st class
Day
Mason (brick layer) 1st class
Day
Mason (brick layer) 2nd class
Day
Beldar
Day
Sundries and carriage of materials
L.S.

Rate

0.009

4782.36

0.17
0.08
0.08
0.50
67.28

301.00
301.00
273.00
247.00
1.49
Total:
320.84

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

324.05
Cost for 15.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 27.71
Rs 27.55

Item Code: 10.10.2

Fixing standard steel glazed doors, windows and ventilators in walls including fixing float glass panes with glazing clips (Only labour
for fixing) - Fixing with carbon steel galvanised dash fastener of required dia and size

Code
0102
0114
9999

Description
LABOUR:
Blacksmith 1st class
Beldar
Sundries and carriage of materials

Details of Cost for : 15.00 Kg

Unit
Quantity
Day
Day
L.S.

0.17
0.17
67.28

Add water charges @ 1% on

Rate
301.00
247.00
1.49
Total:
193.41

Add C.P & OH @15% on

195.34
Cost for 15.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 14.98
Rs 15.00

Item Code: 10.11.1

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, etc., - Fixing with
15x3 mm lugs 10 cm long embedded in CC block 15x10x10 cm of C.C. 1:3:6

Code

DSR-12

Description

Details of Cost for : 30.00 Kg

Unit
Quantity

Rate

Page 374 of 2298

1011
9999
0103
0116
0114
9999
10.010.01

13.050.03

MATERIALS:
Steel glazed door,window/ ventilator, all members viz. F7D,
F4B, K11 and K12B etc.
Carriage of steel door
LABOUR:
Blacksmith 2nd class
Fitter (grade 1)
Beldar
Sundries
Fixing standard steel glazed doors, windows and ventilators in
walls including fixing floa
Applying steel primer (2.44 x1.00 for both sides = 2.44sqm)

Kg

30.00

48.00

L.S.

40.37

1.49

Day
Day
Day
L.S.
Kg

0.17
0.26
0.34
15.37
30.00

273.00
301.00
247.00
1.49
27.71

Applying priming coat : With ready mixed red oxide zinc Sqm
chromate primer on steel galvanise

2.44

20.72

Add water charges @ 1% except on [A]+[B] i.e on

Total:
1731.70

Add C.P & OH @15% except on [A]+[B] i.e on

1749.02
Cost for 30.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 96.44
Rs 96.30

Item Code: 10.11.2

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, etc., - Fixing with
carbon steel galvanised dash fastener of required dia and size.

Code
1011
9999
0103
0116
0114
9999

13.050.03

Details of Cost for : 30.00 Kg

Unit
Quantity

Description
MATERIALS:
Steel glazed door,window/ ventilator, all members viz. F7D,
F4B, K11 and K12B etc.
Carriage of steel door
LABOUR:
Blacksmith 2nd class
Fitter (grade 1)
Beldar
Sundries
Applying steel primer (2.44 x1.00 for both sides = 2.44sqm)

Rate

Kg

30.00

48.00

L.S.

40.37

1.49

Day
Day
Day
L.S.

0.17
0.26
0.34
15.37

273.00
301.00
247.00
1.49

Applying priming coat : With ready mixed red oxide zinc Sqm
chromate primer on steel galvanise

2.44

20.72

Add water charges @ 1% except on [A] i.e on

Total:
1731.70

Add C.P & OH @15% except on [A] i.e on

1749.02
Cost for 30.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 68.73
Rs 68.75

Item Code: 10.12

Extra P/F steel beading in steel windows
Code

DSR-12

Details of Cost for : 1.00 m

Description
Unit
Quantity
Beading for doors, windows, Ventilators and composite units

Rate

Page 375 of 2298

1143
9999
9999

Cost of 1 metre beading

Applying priming coat
Fixing charges

metre
L.S.
L.S.

1.00
0.46
3.01

Add water charges @ 1% on

20.00
1.49
1.49
Total:
25.17

Add C.P & OH @15% on

25.42
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 29.23
Rs 29.25

Item Code: 10.13.1

P/F T-iron frames for doors, windows etc., including fixing butt hinges and screws and applying a priming coat of approved steel
primer. - Fixing with 15x3 mm lugs 10 cm long embedded in CC block 15x10x10 cm of C.C. 1:3:6

Code

Details of Cost for : 17.50 Kg

Unit
Quantity

Description

Rate

MATERIALS:
Tee iron 40x40x6mm
= 2 + 2 + 1 = 5m
5 metres @3.5kg/m = 17.5kg.+
Add wastage @ 5% = 0.87kg.
Total = 18.37 kg. Say 0.18 quintal
1007

Structural steel such as tees, angles channels and R.S. joists

quint

0.18

4250.00

M.S, bars 10mm = Ixlm = 1 metre

1 metre @ 0.60kg/m = 0.60kg.+
Add wastage @ 5% = 0.03kg.
Total = 0.63 kg. Say = 0.006 quintal
1002

Mild steel round bar 12 mm dia and below

M.S.flat
15x3mm = 6x10cm = 0.60 metre
0.6 metre @ 0.35kg/m = 0.21 kg+
Add wastage @ 5% = 0.01 kg.
Total = 0.22 kg

quint

0.006

4100.00

1008

Flats up to 10 mm in thickness
Cement concrete block 1:3:6- 6x15x10x10cm=0.009 cum

quint

0.002

4200.00

04.002.05

P/L CC walls, columns, string courses, coping, bed blocks, Cum

window sills etc. up to floor f
Bright finished or black enameled mild steel butt hinges 10 No
100x58x1.90 mm
for screws and nuts and bolts
L.S.
for applying steel primer
L.S.
Carriage of material
L.S.
LABOUR:
Blacksmith 2nd class
Day
Fitter (grade 1)
Day
Beldar
Day
Sundries
L.S.

0.009

4782.36

6.00

80.00

35.88
17.94
5.33

1.49
1.49
1.49

0.10
0.15
0.20
8.97

273.00
301.00
247.00
1.49
Total:
1069.35

0595
9999
9999
9999
0103
0116
0114
9999

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

1080.04
Cost for 17.50 Kg

DSR-12

Page 376 of 2298

Rate per One Kg:

Rate as per DSR-12:

Rs 73.43
Rs 73.30

Item Code: 10.13.2

P/F T-iron frames for doors, windows etc., including fixing butt hinges and screws and applying a priming coat of approved steel
primer. - Fixing with carbon steel galvanised dash fastener of required dia and size

Code

Details of Cost for : 17.50 Kg

Unit
Quantity

Description

Rate

MATERIALS:
Tee iron 40x40x6mm
= 2 + 2 + 1 = 5m
5 metres @3.5kg/m = 17.5kg.+
Add wastage @ 5% = 0.87kg.
Total = 18.37 kg. Say 0.18 quintal
1007

Structural steel such as tees, angles channels and R.S. joists

quint

0.18

4250.00

Mild steel round bar 12 mm dia and below

quint
Bright finished or black enameled mild steel butt hinges 10 No
100x58x1.90 mm
for screws and nuts and bolts
L.S.
for applying steel primer
L.S.
Carriage of material
L.S.
LABOUR:
Blacksmith 2nd class
Day
Fitter (grade 1)
Day
Beldar
Day
Sundries
L.S.

0.006
6.00

4100.00
80.00

35.88
17.94
5.33

1.49
1.49
1.49

0.10
0.15
0.20
8.97

273.00
301.00
247.00
1.49
Total:
1060.95

M.S, bars 10mm = Ixlm = 1 metre

1 metre @ 0.60kg/m = 0.60kg.+
Add wastage @ 5% = 0.03kg.
Total = 0.63 kg. Say = 0.006 quintal
1002
0595
9999
9999
9999
0103
0116
0114
9999

Add water charges @ 1% on

Add C.P & OH @15% on

1071.56
Cost for 17.50 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 70.42
Rs 70.40

Item Code: 10.14.1.1

Providing and fixing pressed steel door frames conforming to IS: 4351, - Profile B - Fixing with adjustable lugs with split end tail to
each jamb
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
4006
Pressed steel door frames (mild steel sheet 1.25mm) Profile metre
5.00
220.00
B
(Qty : 2+2+1=5m)
0595
Bright finished or black enameled mild steel butt hinges 10 No
6.00
80.00
100x58x1.90 mm
9999
Screws, nuts, bolts
L.S.
35.88
1.49
50x25x5mm angle for threshold 1m @ 2.75 kg/m =2.75 kg or
Say 0.03 qtl

DSR-12

Page 377 of 2298

1007

Structural steel such as tees, angles channels and R.S. joists

quint

0.03

4250.00

9999

Carriage of material
LABOUR:
Fitter (grade 1)
Beldar
Sundries
Steel primer 500x2(2x1.2+2x6+1x12.50 cm) = 2.69sqm
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise

L.S.

5.33

1.49

Day
Day
L.S.

0.15
0.20
8.97

301.00
247.00
1.49

Sqm

2.69

20.72

Add water charges @ 1% except on [A] i.e on

Total:
1444.82

0116
0114
9999

13.050.03

Add C.P & OH @15% except on [A] i.e on

1459.27
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 346.78
Rs 346.75

Item Code: 10.14.1.2

Providing and fixing pressed steel door frames conforming to IS: 4351, - Profile B - Fixing with carbon steel galvanised dash fastener
of required dia and size (to be paid for separately)

Code
4006

9999
0595
9999

1007
9999
0116
0114
9999

13.050.03

Details of Cost for : 5.00 m

Unit
Quantity

Description
MATERIALS:
Pressed steel door frames (mild steel sheet 1.25mm) Profile
B
(Qty : 2+2+1=5m)
Deduct for not providing adjustable lugs
Bright finished or black enameled mild steel butt hinges
100x58x1.90 mm
Screws, nuts, bolts
50x25x5mm angle for threshold 1m @ 2.75 kg/m =2.75 kg or
Say 0.03 qtl
Structural steel such as tees, angles channels and R.S. joists

Rate

metre

5.00

220.00

L.S.
10 No

-20.00
6.00

1.49
80.00

35.88

1.49

quint

0.03

4250.00

L.S.

5.33

1.49

Day
Day
L.S.

0.15
0.20
8.97

301.00
247.00
1.49

Sqm

2.69

20.72

Add water charges @ 1% except on [A] i.e on

Total:
1415.02

Carriage of material
LABOUR:
Fitter (grade 1)
Beldar
Sundries
Steel primer 500x2(2x1.2+2x6+1x12.50 cm) = 2.69sqm
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise

L.S.

Add C.P & OH @15% except on [A] i.e on

1429.17
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 339.86
Rs 339.85

Item Code: 10.14.2.1

DSR-12

Page 378 of 2298

Providing and fixing pressed steel door frames conforming to IS: 4351, - Profile C - Fixing with adjustable lugs with split end tail to
each jamb
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
4007
Pressed steel door frames (mild steel sheet 1.25mm) Profile metre
5.00
240.00
C
(Qty : 2+2+1=5m)
0595
Bright finished or black enameled mild steel butt hinges 10 No
6.00
80.00
100x58x1.90 mm
9999
Screws, nuts, bolts
L.S.
35.88
1.49
50x25x5mm angle for threshold 1m @ 2.75 kg/m =2.75 kg or
Say 0.03 qtl
1007
Structural steel such as tees, angles channels and R.S. joists
quint
0.03
4250.00
9999
0116
0114
9999

13.050.03

Carriage of material
LABOUR:
Fitter (grade 1)
Beldar
Sundries
Steel primer 500x2(2x1.2+2x6+1x12.50 cm) = 2.69sqm
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise

L.S.

5.33

1.49

Day
Day
L.S.

0.15
0.20
8.97

301.00
247.00
1.49

Sqm

2.69

20.72

Add water charges @ 1% except on [A] i.e on

Total:
1544.82

Add C.P & OH @15% except on [A] i.e on

1560.27
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 370.01
Rs 370.00

Item Code: 10.14.2.2

Providing and fixing pressed steel door frames conforming to IS: 4351, - Profile C - Fixing with carbon steel galvanised dash fastener
of required dia and size (to be paid for separately)

Code
4007

9999
0595
9999

1007
9999
0116
0114
9999

DSR-12

Description
MATERIALS:
Pressed steel door frames (mild steel sheet 1.25mm) Profile
C
(Qty : 2+2+1=5m)
Deduct for not providing adjustable lugs
Bright finished or black enameled mild steel butt hinges
100x58x1.90 mm
Screws, nuts, bolts
50x25x5mm angle for threshold 1m @ 2.75 kg/m =2.75 kg or
Say 0.03 qtl
Structural steel such as tees, angles channels and R.S. joists
Carriage of material
LABOUR:
Fitter (grade 1)
Beldar
Sundries
Steel primer 500x2(2x1.2+2x6+1x12.50 cm) = 2.69sqm

Details of Cost for : 5.00 m

Unit
Quantity

Rate

metre

5.00

240.00

L.S.
10 No

-20.00
6.00

1.49
80.00

35.88

1.49

quint

0.03

4250.00

L.S.

5.33

1.49

Day
Day
L.S.

0.15
0.20
8.97

301.00
247.00
1.49

L.S.

Page 379 of 2298

13.050.03

Applying priming coat : With ready mixed red oxide zinc Sqm
chromate primer on steel galvanise

2.69

20.72

Add water charges @ 1% except on [A] i.e on

Total:
1515.02

Add C.P & OH @15% except on [A] i.e on

1530.17
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 363.09
Rs 363.10

Item Code: 10.14.3.1

Providing and fixing pressed steel door frames conforming to IS: 4351, - Profile E - Fixing with adjustable lugs with split end tail to
each jamb
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
4008
Pressed steel door frames (mild steel sheet 1.25mm) Profile metre
5.00
270.00
E
(Qty : 2+2+1=5m)
0595
Bright finished or black enameled mild steel butt hinges 10 No
6.00
80.00
100x58x1.90 mm
9999
Screws, nuts, bolts
L.S.
35.88
1.49
50x25x5mm angle for threshold 1m @ 2.75 kg/m =2.75 kg or
Say 0.03 qtl
1007
Structural steel such as tees, angles channels and R.S. joists
quint
0.03
4250.00
9999
0116
0114
9999

13.050.03

Carriage of material
LABOUR:
Fitter (grade 1)
Beldar
Sundries
Steel primer 500x2(2x1.2+2x6+1x12.50 cm) = 2.69sqm
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise

L.S.

5.33

1.49

Day
Day
L.S.

0.15
0.20
8.97

301.00
247.00
1.49

Sqm

2.69

20.72

Add water charges @ 1% except on [A] i.e on

Total:
1694.82

Add C.P & OH @15% except on [A] i.e on

1711.77
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 404.86
Rs 404.85

Item Code: 10.14.3.2

Providing and fixing pressed steel door frames conforming to IS: 4351, - Profile E - Fixing with carbon steel galvanised dash fastener
of required dia and size (to be paid for separately)

Code
4008

9999
0595

DSR-12

Description

Details of Cost for : 5.00 m

Unit
Quantity

MATERIALS:
Pressed steel door frames (mild steel sheet 1.25mm) Profile metre
E
(Qty : 2+2+1=5m)
Deduct for not providing adjustable lugs
L.S.
Bright finished or black enameled mild steel butt hinges 10 No
100x58x1.90 mm

Rate

5.00

270.00

-20.00
6.00

1.49
80.00

Page 380 of 2298

9999

1007
9999
0116
0114
9999

13.050.03

Screws, nuts, bolts

L.S.
50x25x5mm angle for threshold 1m @ 2.75 kg/m =2.75 kg or
Say 0.03 qtl
Structural steel such as tees, angles channels and R.S. joists
quint

35.88

1.49

0.03

4250.00

L.S.

5.33

1.49

Day
Day
L.S.

0.15
0.20
8.97

301.00
247.00
1.49

Sqm

2.69

20.72

Add water charges @ 1% except on [A] i.e on

Total:
1665.02

Carriage of material
LABOUR:
Fitter (grade 1)
Beldar
Sundries
Steel primer 500x2(2x1.2+2x6+1x12.50 cm) = 2.69sqm
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise

Add C.P & OH @15% except on [A] i.e on

1681.67
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 397.93
Rs 397.90

Item Code: 10.15.1

P/F M.S. Tubular frames for doors, windows etc., .. Fixing with 15x3 mm lugs 10 cm long embedded in cement_x000D_
concrete block 15x10x10 cm of C.C. 1:3:6
Details of Cost for : 7.13 Kg
Code
Description
Unit
Quantity
Rate
MATERIALS:
L- section - 32x22x28mm 1.60mm thick
2.00+2.00+1.00 = 5.00 m
Width of MS sheet =
32+24.80+22+24.80+10mm = 113.60mm =
0.1 136m
Area of MS sheet = 0.1136x5.00x0.0016 =
0.0009088 sqm
Weight of Sheet = 0.0009088x7850 = 7.134 kg
Add wastage @ 5% = 0.357kg.
Total = 7.491 kg Say 7.49 kg
4011

Mild steel tubes electric resistant or induction butt welded

kilog

7.49

65.00

M.S, bars 10mm = Ixlm = 1 metre

1 metre @ 0.60kg/m = 0.60kg.+
Add wastage @ 5% = 0.03kg.
Total = 0.63 kg. Say = 0.006 quintal

DSR-12

1002

Mild steel round bar 12 mm dia and below

M.S.flat
15x3mm = 6x10cm = 0.60 metre
0.6 metre @ 0.35kg/m = 0.21 kg+
Add wastage @ 5% = 0.01 kg.
Total = 0.22 kg

quint

0.006

4100.00

1008

Flats up to 10 mm in thickness
Cement concrete block 1:3:6- 6x15x10x10cm= 0.009 cum

quint

0.002

4200.00

04.002.05

P/L CC walls, columns, string courses, coping, bed blocks, Cum

window sills etc. up to floor f

0.009

4782.36

Page 381 of 2298

0595
9999
9999
9999
0103
0116
0114
9999

Bright finished or black enameled mild steel butt hinges 10 No

100x58x1.90 mm
for screws and nuts and bolts
L.S.
for applying steel primer
L.S.
Carriage of material
L.S.
LABOUR:
Blacksmith 2nd class
Day
Fitter (grade 1)
Day
Beldar
Day
Sundries
L.S.

6.00

80.00

35.88
17.94
5.33

1.49
1.49
1.49

0.04
0.06
0.08
3.64

273.00
301.00
247.00
1.49
Total:
710.14

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

717.24
Cost for 7.13 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 121.72
Rs 121.45

Item Code: 10.15.2

P/F M.S. Tubular frames for doors, windows etc., .. Fixing with carbon steel galvanised dash fastener of required dia and size (to be
paid for separately)
Details of Cost for : 7.13 Kg
Code
Description
Unit
Quantity
Rate
MATERIALS:
L- section - 32x22x28mm 1.60mm thick
2.00+2.00+1.00 = 5.00 m
Width of MS sheet =
32+24.80+22+24.80+10mm = 113.60mm =
0.1 136m
Area of MS sheet = 0.1136x5.00x0.0016 =
0.0009088 sqm
Weight of Sheet = 0.0009088x7850 = 7.134 kg
Add wastage @ 5% = 0.357kg.
Total = 7.491 kg Say 7.49 kg
4011

Mild steel tubes electric resistant or induction butt welded

kilog

7.49

65.00

0.006
6.00

4100.00
80.00

35.88
17.94
5.33

1.49
1.49
1.49

0.04
0.06
0.08
3.64

273.00
301.00
247.00
1.49
Total:
701.74

M.S, bars 10mm = Ixlm = 1 metre

1 metre @ 0.60kg/m = 0.60kg.+
Add wastage @ 5% = 0.03kg.
Total = 0.63 kg. Say = 0.006 quintal
1002
0595
9999
9999
9999
0103
0116
0114
9999

Mild steel round bar 12 mm dia and below

quint
Bright finished or black enameled mild steel butt hinges 10 No
100x58x1.90 mm
for screws and nuts and bolts
L.S.
for applying steel primer
L.S.
Carriage of material
L.S.
LABOUR:
Blacksmith 2nd class
Day
Fitter (grade 1)
Day
Beldar
Day
Sundries
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

708.76
Cost for 7.13 Kg

DSR-12

Page 382 of 2298

Rate per One Kg:

Rate as per DSR-12:

Rs 114.32
Rs 114.30

Item Code: 10.16.1

Steel work in built up tubular trusses .. ..including applying a priming coat of approved steel primer, - Hot finished welded type
tubes.
Details of Cost for : 119.00 Kg
Code
Description
Unit
Quantity
Rate
MATERIALS:
50mm dia. tube
Tie beam-lx8.0m = 8.00m+
Principal rafter 2x4.30m = 8.60m
=16.60m
16.60m @ 5.10kg./m = 84.66kg.
40mm dia. tube
Members = 2(0.45+1.25+0.90+2.15)
= 2x4.75=9.50m
9.50m @ 3.61kg/m = 34.60Kg.
Total = 118.96kg.
Add wastage @ 5% = 5.94Kg.
= 124.90Kg. say 125 kg
4009
2205

MS tube (hot finished welded type)

Carriage of steel
Priming coat
50mm dia. tube 16.60x0.157m = 1.61 sqm.
40mm dia. tube 9.50x0.125m = 1.91 sqm.
=2.80sqm

13.050.03

Applying priming coat : With ready mixed red oxide zinc Sqm
chromate primer on steel galvanise
Welding charges:Rafter:- 4x22/7x6.03 = 75.80cm.+
Ties:- 2x22/7x6.03=37.90cm.+
Members:-2x4x2x22/7x4.83=242.87cm
= 356.57cm say 357cm

1215

Welding charges (electric)

For cutting, assembling & erection
LABOUR:
Blaks smith I Class
Bandhani
Beldar
Sundries

0102
0100
0114
9999

kilog
tonne

125.00
0.125

48.00
77.87

2.80

20.72

cm

357.00

1.50

Day
Day
Day
L.S.

1.50
0.75
5.50
80.73

301.00
260.00
247.00
1.49
Total:
8670.52

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

8757.23
Cost for 119.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 85.12
Rs 85.10

Item Code: 10.16.2

Steel work in built up section in tubular trusses : Hot finished seamless type tubes.
Details of Cost for : 119.00 Kg
Code
Description
Unit
Quantity

DSR-12

Rate

Page 383 of 2298

Details of cost for a truss of span 8 metre weight = 119 kg.

4010
2205

13.050.03

1215
0102
0100
0114
9999

MATERIALS
50mm dia. tube
Tie beam- I x 8.0m = 8.00m +
Principal rafter 2x4.30m = 8.60m = 16.60m
16.60m @ 5.10kg./ m = 84.66 kg.
40mm dia. tube
Members = 2(0.45+1.25+0.90+2.15)
= 2x4.75 = 9.50m
9.50m @ 3.61kg/m = 34.60kg.
Total = 118.96kg.
Add wastage @ 5% = 5.94kg.
= 124.90kg. say 125 Kg.
Mild steel tubes hot finished seamless type
kilog
Carriage of tubes
tonne
Priming coat
50mm dia. tube 16.60x0.157 m = 1.61 sqm.
40mm dia. tube 9.50x 10125m = 1.91 sqm.
=2.80 sqm.
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise
Welding charges:Rafter:- 4x22/7x6.03 = 75.80cm.+
Ties :- 2x22/7x6.03=37.90cm.+
Members :- 2x4x2x22/7x4.83 = 242.87cm
= 356.57 cm say 357 cm
Welding
cm
LABOUR
Blacksmith 1st class
Day
Bandhani
Day
Beldar
Day
Sundries
L.S.

125.00
0.125

58.00
77.87

2.80

20.72

357.00

1.50

1.50
0.75
5.50
80.73

301.00
260.00
247.00
1.49
Total:
9920.52

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

10019.73
Cost for 119.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 97.32
Rs 97.30

Item Code: 10.16.3

Steel work in built up section in tubular trusses : Electric resistance or induc- tion butt welded tubes.
Details of Cost for : 119.00 Kg
Code
Description
Unit
Quantity
Details of cost for a truss of span 8 metre weight = 119 kg.

Rate

MATERIALS50mm dia. tube

Tie beam-1x8.0m = 8.00m+
Principal rafter 2x4.30m = 8.60m
= 16.60m
16.60m @ 5.10kg./m = 84.66kg.
40mm dia. tube
Members = 2(0.45+1.25+0.90+2.15)
= 2x4.75=9.50m
9.50m @ 3.61kg/m = 34.60Kg.
Total = 118.96kg.

DSR-12

Page 384 of 2298

4011
2205

13.050.03

1215
0102
0100
0114
9999

Add wastage @ 5% = 5.94Kg.

= 124.90Kg. say 125 kg.
Electric resistance or Induction on butt welded tubes
kilog
Carriage of tubes
tonne
Priming coat
50mm dia. tube 16.60x0.157 m = 1.61 sqm.
40mm dia. tube 9.50x 10125m = 1.91 sqm.
=2.80 sqm.
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise
Welding charges:Rafter:- 4x22/7x6.03 = 75.80cm.+
Ties :- 2x22/7x6.03=37.90cm.+
Members :- 2x4x2x22/7x4.83 = 242.87cm
= 356.57 cm say 357 cm
Welding
cm
LABOUR
Blacksmith 1st class
Day
Bandhani
Day
Beldar
Day
Sundries
L.S.

125.00
0.125

65.00
77.87

2.80

20.72

357.00

1.50

1.50
0.75
5.50
80.73

301.00
260.00
247.00
1.49
Total:
10795.52

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

10903.48
Cost for 119.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 105.86
Rs 105.85

Item Code: 10.17

P/F MS fan clamp type I/II of 16mm dia MS bar
Code

1003
0103
0114
9999

Description
Details of cost for 1 clamp
MATERIATS16mm dia. M.S. bar 1m @ 1.58 kg/m
1x1.58 = 1.58Kg+
Add wastage @ 5% = 0.08 Kg.
= 1.66 Kg.
Say 1.70kg. or 0.017q
M.S. bar
LABOURBlacksmith 2nd class
Beldar
Sundries (Carriage, fixing and painting etc.)

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

quint

0.017

4000.00

Day
Day
L.S.

0.04
0.04
1.82

273.00
247.00
1.49
Total:
91.51

Add water charges @ 1% on

Add C.P & OH @15% on

92.43
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 106.29
Rs 106.30

Item Code: 10.18

P/F circular/Hexagonal CI/ MS sheet box for ceiling fan clamp & top lids, clamps 12mm dia MS bar
Details of Cost for : 1.00 No.

DSR-12

Page 385 of 2298

Code

4012

1002
0103
0114
9999

Description
Details of cost of one box clamp
MATERIALSCircular C.I. Box including bottom and top lids
12mm dia. M.S. bar 80cm @ 0.9kg/m 0.72kg+
Add wastage @ 5% - 0.036
0.756 kg. Say 0.008 q
LABOURBlacksmith 2nd class
Beldar
Sundries (Carriage, fixing and painting etc.)

Unit

Quantity

Rate

each

1.00

50.00

quint

0.008

4100.00

Day
Day
L.S.

0.03
0.03
1.82

273.00
247.00
1.49
Total:
101.11

Add water charges @ 1% on

Add C.P & OH @15% on

102.12
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 117.44
Rs 117.45

Item Code: 10.19

Code

1035
1010
0103
9999

Description
Details of cost for one bolt 16mm dia. and 1200mm long.
MATERIALSl .2m @ 1.58kg/m = 1.895 kg = 0.019q
Plate-100xl00x6mm @ 47kg/sqm.
Wt. = 0.47kg. = 0.005q
LABOURBlacksmith 2nd class
Carriage and labour for fixing

Details of Cost for : 2.40 Kg

Unit
Quantity

Rate

quint

0.019

5400.00

quint

0.005

4500.00

Day
L.S.

0.03
4.55

273.00
1.49
Total:
140.07

Add water charges @ 1% on

Add C.P & OH @15% on

141.47
Cost for 2.40 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 67.79
Rs 67.80

Item Code: 10.20

P/F bolts i/c nuts, washers complete
Code

1034
2205
0103
0114
9999

DSR-12

Description
Details of cost for 0.10q of nuts and washers
MATERIALSBolts, nuts and washers
Carriage
LABOURBlacksmith 2nd class
Beldar
Sundries

Details of Cost for : 10.00 Kg

Unit
Quantity

Rate

quint
tonne

0.10
0.01

5400.00
77.87

Day
Day
L.S.

0.38
0.38
4.55

Add water charges @ 1% on

273.00
247.00
1.49
Total:
745.16

Add C.P & OH @15% on

752.61

Page 386 of 2298

Cost for 10.00 Kg

Rate per One Kg:
Rate as per DSR-12:

Rs 86.55
Rs 86.55

Item Code: 10.21

Code

1020
2205
0116
0139
9999

Description
Details of cost for 0.10q of rivets
MATERIALSRivets
Carriage
LABOURFitter (Grade I)
Beldar special
Sundries

Details of Cost for : 10.00 Kg

Unit
Quantity

quint
tonne
Day
Day
L.S.

Rate

0.10
0.01

4800.00
77.87

0.83
0.83
10.79

301.00
260.00
1.49
Total:
962.49

Add water charges @ 1% on

Add C.P & OH @15% on

972.11
Cost for 10.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 111.79
Rs 111.80

Item Code: 10.22

Welding by gas or electric plant i/c transportation of plant
Code
1214
9999

Details of Cost for : 1.00 cm

Description
Unit
Quantity
Welding by gas electric plant including transportation of cm
1.00
welding plant at site etc. compl
Sundries
L.S.
0.26
Add water charges @ 1% on

Rate
1.50
1.49
Total:
1.89

Add C.P & OH @15% on

1.91
Cost for 1.00 cm
Rate per One Cm:
Rate as per DSR-12:

Rs 2.20
Rs 2.20

Item Code: 10.25.1

Steel work welded in built up sections etc as required in stringers, treads etc of staircase
Details of Cost for : 533.10 Kg
Code
Description
Unit
Quantity
Consider a flight of staircase of 2.8m height with tread and
riser of 200mm & 0.60m wide.
MATERIALS(i) Unequal angles as stringers-75x50x6mm
4x12.69x5.6 = 284.25 Kg.
Add wastage @ 5% =14.21 Kg.
= 298.46kg. Say 2.985q
(ii) unequal angles at sides 50x30x5mm
2xl4x0.2x3.00=I6.8kg.
Add wastage @ 5% = 0.84kg.
= 17.64 kg. Say 0.176q = 3.161q
1007
Unequal angles
quint
3.161

DSR-12

Rate

4250.00

Page 387 of 2298

1010

1549

1003
2205
2271
1215
0102
0114
0100

13.050.03
9999

(iii) plate for tread 8mm thick

14x7.5= 105.00kg+
Add wastage @ 5% = 5.25kg.
= 110.25kg. Say 1.103q
Plate for tread
quint
(iv) G. pipe for railing 40mm
2xl2.69m = 25.38m+
Add wastage @ 5% = 1.27m = 26.65m
G.I. Pipe for railing
metre
(v) M.S. round bars 16mm dia.
15x0.75x2xl.58 = 35.55kg.+
Add wastage @ 5% = 1.78kg.
= 37.33 Kg. Say O.373q
M.S. round bars
quint
Carriage of steel
(3.I61 + 1.103+0.373)=4.637q = 0.4637 tonne
tonne
Carriage of g.I. Pipe approx. wt.
tonne
3.72x26.65=99.14kg.
Welding charge (electric) 23.20m
cm
LABOUR:
Blacksmith 1st class
Day
Beldar
Day
Bandhani
Day
Applying priming coat
(i) steps 2.4x 14 = 33.60sqm.+
(ii) angles 4x 12.69x0.25 = 12.69sqm.+
(iii) Bars and other components = 2.00 sqm.
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise
Sundries
L.S.

1.103

4500.00

26.65

202.00

0.373

4000.00

0.4637
0.0991

77.87
77.87

2320.00

1.50

1.85
1.25
0.60

301.00
247.00
260.00

48.29

20.72

110.89

1.49
Total:
29983.71

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

30283.55
Cost for 533.10 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 67.20
Rs 67.20

Item Code: 10.25.2

Steel work welded in built up sections/ framed work including priming coat - In gratings, frames, guard bar, ladder, railings,
brackets, gates and similar works.
Details of Cost for : 21.80 Kg
Code
Description
Unit
Quantity
Rate
MATERIALS:
Details of Imxlm framed guard bar grating.
(i) M.S. flat 50x6 mm 2.4kg/per metre
5.75x2.40 = 13.8kg. + Add wastage@ 5%
= 0.69kg., Total = 14.49kg. say 14.5 kg.
1008

1002
2205
1215
0102
0114

DSR-12

M.S. Flat (ii) 12mm dia. Bars @ 0.89 kg/m

9x1 = 9 metre @ 0.89kg/m = 8.01 kg+Add
wastag
MS round bars 12mm dia and below
Carriage of steel
Welding charges (electric)
LABOUR :
Blaks smith I Class
Beldar

quint
quint
tonne
cm
Day
Day

0.145
0.084
0.0229
60.00

4200.00
4100.00
77.87
1.50

0.70
0.50

301.00
247.00

Page 388 of 2298

Applying priming coat 0.65 sqm

0100
13.050.03
9999

Bandhani
Day
Applying priming coat : With ready mixed red oxide zinc Sqm
chromate primer on steel galvanise
Sundries
L.S.

0.25
0.65

260.00
20.72

4.55

1.49
Total:
1451.16

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

1465.67
Cost for 21.80 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 77.94
Rs 77.90

Item Code: 10.26.1

P/F hand rail by welding to steel ladder railing MS tube
Code

4009

2205
13.050.03
1215

0102
0114
0100
9999

Description
Details of cost for hand rail of railing of two flights of
staircase, length of hand rail = 5.40m
MATERIALSM.S. tube 40mm nominal bore (medium) =
5.40m @ 3.6lkg/m= 19.49kg
Add wastage @ 5% =0.097
Total = 20.46 kg.
Carriage of tube
Priming coat 40mm dia.Tube-5.4x22/7x0.0483= 0.82 sqm
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise
Welding charges (joints of hand rail and ballustards)
18x4x1.00 = 72cm
Labour for cutting assembling & erection
Blacksmith 1st class
Beldar
Bandhani
Sundries

Details of Cost for : 19.49 Kg

Unit
Quantity

Rate

kilog

20.46

48.00

tonne

0.0205

77.87

0.82

20.72

cm

72.00

1.50

Day
Day
Day
L.S.

0.24
0.90
0.12
12.48

301.00
247.00
260.00
1.49
Total:
1436.02

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

1450.38
Cost for 19.49 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 86.45
Rs 86.45

Item Code: 10.26.2

P/F hand rail by welding to steel ladder railing ERW tubes
Code

4011

2205

DSR-12

Details of Cost for : 17.71 Kg

Description
Unit
Quantity
Details of cost for hand rail of railing of two flights of
staircase, length of hand rail = 5.40m
MATERIALSE.R.W. tube 40mm nominal bore = 5.40m @
kilog
18.59
3.28kg/m= 17.31kg
Add wastage @ 5% = 0.88 kg
Total = 18.59 kg
Carriage of tube
tonne
0.0186

Rate

65.00

77.87

Page 389 of 2298

Priming coat 40mm dia.Tube-5.4x22/7x0.0483 = 0.82 sqm

13.050.03
1215

0102
0114
0100
9999

Applying priming coat : With ready mixed red oxide zinc

chromate primer on steel galvanise
Welding charges (joints of hand rail and ballustards)
18x4x1.00 = 72cm
Labour for cutting assembling & erection
Blacksmith 1st class
Beldar
Bandhani
Sundries

0.82

20.72

cm

72.00

1.50

Day
Day
Day
L.S.

0.24
0.90
0.12
12.48

301.00
247.00
260.00
1.49
Total:
1662.14

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

1678.76
Cost for 17.71 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 109.97
Rs 109.95

Item Code: 10.26.3

P/F hand rail by welding to steel ladder railing GI pipes
Code

1549

2271

13.050.03
1215

0102
0114
0100
9999

Details of Cost for : 20.09 Kg

Description
Unit
Quantity
Details of cost for hand rail of railing of two flights of
staircase, length of hand rail =5.40m
MATERIALSG.I. pipe 40mm nominal bore = 5.40m
metre
5.67
Add wastage @ 5% = 0.27m
Total = 5.67m
Carriage of pipe (5.67m @ 3.72 kg/m = 21.09kg)
tonne
0.0211
Priming coat 40mm dia.Tube-5.4x22/7x0.0483 = 0.82 sqm
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise
Welding charges (joints of hand rail and ballustards)
18x4x1.00 = 72cm
Labour for cutting assembling & erection
Blacksmith 1st class
Beldar
Bandhani
Sundries

Rate

202.00

77.87

0.82

20.72

cm

72.00

1.50

Day
Day
Day
L.S.

0.24
0.90
0.12
12.48

301.00
247.00
260.00
1.49
Total:
1599.32

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

1615.31
Cost for 20.09 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 93.31
Rs 93.30

Item Code: 10.27.1

P/F carbon steel galvanised dash fastener of 10 mm dia double threaded 6.8 grade counter sunk head.. .. - 10 x 60 mm

Code

Description

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

MATERIALS:

DSR-12

Page 390 of 2298

2506
0124
0114
9999

Carben Steel galvanised dash fastner (min 5 micron) of 10 10 No

mmdia double threaded 6.8 grade
Mason (brick layer) 2nd class
Day
Beldar
Day
Sundries Carriage of material
L.S.

10.00

250.00

0.40
0.40
10.00

273.00
247.00
1.49
Total:
472.90

Add water charges @ 1% on

Add C.P & OH @15% on

477.63
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 54.93
Rs 54.95

Item Code: 10.27.2

P/F carbon steel galvanised dash fastener of 10 mm dia double threaded 6.8 grade counter sunk head.. .. - 10 x 80 mm

Code
2507
0124
0114
9999

Description

Details of Cost for : 10.00 Nos

Unit
Quantity

MATERIALS:
Carben Steel galvanised dash fastner (min 5 micron) of 10 10 No
mmdia double threaded 6.8 grade
Mason (brick layer) 2nd class
Day
Beldar
Day
Sundries Carriage of material
L.S.

Rate

10.00

293.00

0.40
0.40
10.00

273.00
247.00
1.49
Total:
515.90

Add water charges @ 1% on

Add C.P & OH @15% on

521.06
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 59.92
Rs 59.90

Item Code: 10.27.3

P/F carbon steel galvanised dash fastener of 10 mm dia double threaded 6.8 grade counter sunk head.. .. - 10 x 120mm

Code
2508
0124
0114
9999

Description

Details of Cost for : 10.00 Nos

Unit
Quantity

MATERIALS:
Carben Steel galvanised dash fastner (min 5 micron) of 10 10 No
mmdia double threaded 6.8 grade
Mason (brick layer) 2nd class
Day
Beldar
Day
Sundries Carriage of material
L.S.

Rate

10.00

364.00

0.50
0.50
10.00

273.00
247.00
1.49
Total:
638.90

Add water charges @ 1% on

Add C.P & OH @15% on

645.29
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 74.21
Rs 74.20

Item Code: 10.27.4

P/F carbon steel galvanised dash fastener of 10 mm dia double threaded 6.8 grade counter sunk head.. .. - 10 x 140 mm

DSR-12

Page 391 of 2298

Code
2509
0124
0114
9999

Description

Details of Cost for : 10.00 Nos

Unit
Quantity

MATERIALS:
Carben Steel galvanised dash fastner (min 5 micron) of 10 10 No
mmdia double threaded 6.8 grade
Mason (brick layer) 2nd class
Day
Beldar
Day
Sundries Carriage of material
L.S.

Rate

10.00

425.00

0.50
0.50
10.00

273.00
247.00
1.49
Total:
699.90

Add water charges @ 1% on

Add C.P & OH @15% on

706.90
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 81.29
Rs 81.30

Item Code: 10.27.5

P/F carbon steel galvanised dash fastener of 10 mm dia double threaded 6.8 grade counter sunk head.. .. - 10 x 160 mm

Code
2510
0124
0114
9999

Description

Details of Cost for : 10.00 Nos

Unit
Quantity

MATERIALS:
Carben Steel galvanised dash fastner (min 5 micron) of 10 10 No
mmdia double threaded 6.8 grade
Mason (brick layer) 2nd class
Day
Beldar
Day
Sundries Carriage of material
L.S.

Rate

10.00

560.00

0.60
0.60
10.00

273.00
247.00
1.49
Total:
886.90

Add water charges @ 1% on

Add C.P & OH @15% on

895.77
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 103.01
Rs 103.00

Item Code: 10.28

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc.,
Details of Cost for : 2.00 Kg
Code
Description
Unit
Quantity
MATERIALS:
Qty of stainless steel :
2 .00 + wastage @ 5% =0.10 = 2.10 kg
4001
Stainless steel (Grade-304)hollow section round/square tubes Kg
2.10

325.00

4002

1.00

120.00

0.06
0.20
0.02
30.00
20.00
7.50

301.00
247.00
260.00
1.49
1.49
1.49
Total:
960.84

0102
0114
0100
9999
9999
9999

Stainless steel bolts/square bar and plates

Kg
For fabrication, assembling, erection, welding, curvaturing,
grinding, buffing etc.,
LABOUR:
Blacksmith 1st class
Day
Beldar
Day
Bandhani
Day
Welding of stainless steel section
L.S.
Curvaturing, grinding, buffing etc.,
L.S.
Sundries for making good the walls and floors
L.S.

Add water charges @ 1% on

DSR-12

Rate

Page 392 of 2298

Add C.P & OH @15% on

970.45
Cost for 2.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 558.01
Rs 558.00

Item Code: 10.29.1

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Code

Description

Details of Cost for : 1.54 Sqm

Unit
Quantity

Rate

MATERIALS:
Wire gauze 1.40x1.10=1.54 sqm
Add wastage @ 10%=0.15 sqm
Total =1.69 sqm.
7029
9999

1008
9999
0103
0112
0114
9999

Galvanised wire mesh of average width of aperture 1.4 mm sqm

and nominal dia. of wire 0.63 mm
Carriage
L.S.
M.S. Flat 15x3=2x(1.40+1.10)=5.0 metre
Add wastage @ 5%=0.25 m
Total=5.25 m
[email protected]/m=1.84 kg
Flats up to 10 mm in thickness
Carriage
LABOUR:
Blacksmith 2nd class
Carpenter 2nd class
Beldar
Sundries

1.69

230.00

1.82

1.49

quint
L.S.

0.0184
1.82

4200.00
1.49

Day
Day
Day
L.S.

0.17
0.17
0.06
19.76

273.00
273.00
247.00
1.49
Total:
608.48

Add water charges @ 1% on

Add C.P & OH @15% on

614.56
Cost for 1.54 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 458.92
Rs 458.95

Item Code: 10.29.2

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides

Code

Description

Details of Cost for : 1.54 Sqm

Unit
Quantity

Rate

MATERIALS:
Wire gauze 1.40x1.10=1.54 sqm
Add wastage @ 10%=0.15 sqm
Total =1.69 sqm.
8737
9999

DSR-12

Stainless steel wire guage (Grade-304) aperture 1.4mm and Sqm

0.50 mm dia wire
Carriage
L.S.
M.S. Flat 15x3=2x(1.40+1.10)=5.0 metre
Add wastage @ 5%=0.25 m

1.69

760.00

1.82

1.49

Page 393 of 2298

Total=5.25 m
[email protected]/m=1.84 kg
1008
9999
0103
0112
0114
9999

Flats up to 10 mm in thickness
Carriage
LABOUR:
Blacksmith 2nd class
Carpenter 2nd class
Beldar
Sundries

quint
L.S.

0.0184
1.82

4200.00
1.49

Day
Day
Day
L.S.

0.17
0.17
0.06
19.76

273.00
273.00
247.00
1.49
Total:
1504.18

Add water charges @ 1% on

Add C.P & OH @15% on

1519.22
Cost for 1.54 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1134.48
Rs 1134.50

Item Code: 10.30.1

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with - 4.0 mm
thick glass panes
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 10 glass panes
(area of each pane = 0.10 sqm)
MATERIALS:
Area of glass panes =1.00 sqm +
Add wastage @ 10% = 0.10
Total =1.10 sqm
2406
9999
0119
9999

Float glass sheet of nominal thickness 4 mm (weight not less

than 10kg/sqm).
Carriage
LABOUR:
Glazier
Sundries, putty, glazing clips, scaffoldings etc.,

sqm

1.10

310.00

L.S.

1.82

1.49

Day
L.S.

0.13
125.58

273.00
1.49
Total:
566.31

Add water charges @ 1% on

Add C.P & OH @15% on

571.97
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 657.77
Rs 657.75

Item Code: 10.30.2

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with - 5.5 mm
thick glass panes
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 10 glass panes
(area of each pane = 0.10 sqm)
MATERIALS:
Area of glass panes =1.00 sqm +
Add wastage @ 10% = 0.10
Total =1.10 sqm

DSR-12

Page 394 of 2298

2407
9999
0119
9999

Float glass sheet of nominal thickness 5.5 mm.(weight not less

than 13.50 kg/sqm).
Carriage
LABOUR:
Glazier
Sundries, putty, glazing clips, scaffoldings etc.,

sqm

1.10

450.00

L.S.

1.82

1.49

Day
L.S.

0.13
125.58

273.00
1.49
Total:
720.31

Add water charges @ 1% on

Add C.P & OH @15% on

727.51
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 836.64
Rs 836.65

Item Code: 11.1.1

Brick on edge flooring with 75 class designation bricks in cement mortar : 1:4- coarse sand
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS:
2602
Common burnt clay F.P.S (non modular) Bricks of class 1000
565.00
designation 7.5
2201
Carriage of bricks
1000
565.00
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
Cum
0.434
0367
Cement
tonne
0.02
(For slurry)
2209
Carriage of cement
tonne
0.02
LABOUR:
0124
Mason II class
Day
1.08
0114
Beldar
Day
0.25
0115
Coolie
Day
1.62
0101
Bhisthi
Day
0.27
Add water charges @ 1% on

Rate
2900.00
233.60
3485.41
5000.00
77.87
273.00
247.00
247.00
260.00
Total:
4211.64

Add C.P & OH @15% on

4253.76
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 489.18
Rs 489.20

Item Code: 11.1.2

Brick on edge flooring with 75 class designation bricks in cement mortar : 1:6- coarse sand
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS:
2602
Common burnt clay F.P.S (non modular) Bricks of class 1000
565.00
designation 7.5
2201
Carriage of bricks
1000
565.00
03.011
Cement mortar 1:6 (1 cement : 6 coarse sand).
Cum
0.434
0367
Cement
tonne
0.02
(For slurry)
2209
Carriage of cement
tonne
0.02
LABOUR:
0124
Mason II class
Day
1.08
0114
Beldar
Day
0.25
0115
Coolie
Day
1.62
0101
Bhisthi
Day
0.27

DSR-12

Rate
2900.00
233.60
2825.29
5000.00
77.87
273.00
247.00
247.00
260.00

Page 395 of 2298

Add water charges @ 1% on

Total:
3925.15

Add C.P & OH @15% on

3964.40
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 455.91
Rs 455.90

Item Code: 11.2

Dry brick on edge floor with bricks of class 75 filling joints with local fine sand
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS:2602
Common burnt clay F.P.S (non modular) Bricks of class 1000
645.00
designation 7.5
2201
Carriage of bricks
1000
645.00
0983
Fine sand
cum
0.15
2203
Carriage of fine sand
cum
0.15
03.018
Mud mortar
0.15
(Rate as per item No. 3.18)
LABOUR:0124
Mason 2nd class
Day
0.90
0115
Coolie
Day
1.98
0101
Bhisti
Day
0.05
Add water charges @ 1% on

Rate
2900.00
233.60
640.00
87.60
301.12

273.00
247.00
260.00
Total:
2923.24

Add C.P & OH @15% on

2952.47
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 339.53
Rs 339.55

Item Code: 11.3.1

Cement concrete flooring 1:2:4 ...40mm thick with 20mm nominal size stone aggregate.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS:0295
20mm nominal size stone ballast
cum
0.267
0297
10mm nominal size stone ballast
cum
0.089
2202
Carriage of stone ballast
cum
0.356
0982
Coarse sand
cum
0.178
2203
Carriage of sand
cum
0.178
0367
Cement for slurry
tonne
0.17
2209
Carriage of cement
tonne
0.17
LABOUN0124
Mason 2nd class
Day
0.80
0114
Beldar
Day
1.40
0101
Bhisti
Day
1.04
0127
Mixer operator
Day
0.03
0002
Mixer
Day
0.03
9999
Sundries
L.S.
40.43
Add water charges @ 1% on

Rate
1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87
273.00
247.00
260.00
301.00
800.00
1.49
Total:
2411.05

Add C.P & OH @15% on

2435.16
Cost for 10.00 Sqm

DSR-12

Page 396 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 280.04
Rs 280.05

Item Code: 11.4

52 mm thick CC flooring with concrete hardener topping under layer 40 mm thick cement concrete 1:2:4 and top layer 12 mm thick
cement hardener consisting of mix 1:2 by volume ....
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:0295
20mm ballast
cum
0.267
1050.00
0297
10mm ballast
cum
0.089
1050.00
2202
Carriage of stone ballast
cum
0.356
87.60
0982
Coarse sand
cum
0.178
1120.00
2203
Carriage of coarse sand
cum
0.178
87.60
0298
Stone aggregate 6mm
cum
0.115
1100.00
2202
Carriage of stone ballast aggregate 6mm
cum
0.115
87.60
0367
Cement
tonne
0.211
5000.00
0367
Cement for slurry
tonne
0.02
5000.00
2209
Carriage of cement
tonne
0.231
77.87
7254
Hardening compound
litre
2.44
37.00
9999
Carriage of hard crete
L.S.
2.73
1.49
Labour
0124
Mason 2nd class
Day
2.15
273.00
0114
Beldar
Day
1.60
247.00
0115
Coolie
Day
1.88
247.00
0101
Bhisti
Day
0.27
260.00
9999
Sundries
L.S.
53.82
1.49
Total:
Add water charges @ 1% on
3620.75
Add C.P & OH @15% on
3656.96
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 420.55
Rs 420.50

Item Code: 11.5

62mm thick CC with concrete hardener topping_x000D_under layer 50mm thick CC 1:2:4 and top layer 12_x000D_mm thick
cement hardener of mix 1:2_x000D_
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
0295
Stone Aggregate (Single size) : 20 mm nominal size
cum
0.334
1050.00
0297
Stone Aggregate (Single size) : 10 mm nominal size
cum
0.111
1050.00
2202
Carraige of Stone aggregate below 40 mm nominal size
cum
0.445
87.60
0982
Coarse sand (zone III)
cum
0.222
1120.00
2203
Carraige of Coarse sand
cum
0.222
87.60
0298
Stone Aggregate (Single size) : 06 mm nominal size
cum
0.115
1100.00
2202
Carraige of Stone aggregate below 40 mm nominal size
cum
0.115
87.60
0367
Portland Cement
tonne
0.243
5000.00
0367
Portland Cement
tonne
0.02
5000.00
2209
Carraige of Cement
tonne
0.263
77.87
7254
Hard crete
litre
2.44
37.00
9999
Sundries
L.S.
2.73
1.49
Labour
0124
Mason (brick layer) 2nd class
Day
2.15
273.00
0114
Beldar
Day
1.86
247.00

DSR-12

Page 397 of 2298

0115
0101
9999

Coolie
Bhisti
Sundries

Day
Day
L.S.

1.88
0.27
53.82

Add water charges @ 1% on

247.00
260.00
1.49
Total:
4001.84

Add C.P & OH @15% on

4041.86
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 464.81
Rs 464.80

Item Code: 11.6.1

Cement plaster skirting (up to 30 cm height) with CM 1:3 finished with a floating coat of neat cement. 18 mm thick.

Code

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description

Rate

MATERIALS:
Cement mortar 1:3 = 0.205 cum +
Add for rounding corners = 0.03cum = 0.235cum
03.008
0367
2209
0124
0115
0101
9999

Cement mortar 1:3 (1 cement : 3 coarse sand)

Cement
(For floating coat)
Carriage of cement
LABOUR:
Mason II class
Coolie
Bhisthi
Sundries

Cum
tonne

0.235
0.02

4145.53
5000.00

tonne

0.02

77.87

1.88
1.88
0.54
19.76

273.00
247.00
260.00
1.49
Total:
2223.20

Day
Day
Day
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

2245.43
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 258.22
Rs 258.20

Item Code: 11.7

CC pavement with 1:2:4 with 20mm nominal size stone aggregate ....
Code
04.001.03

0124
0114
0101
9999

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
Extra labour for laying in floors etc.
Mason 2nd class
Beldar
Bhisti
Sundries

Rate

Cum

1.00

4514.03

Day
Day
Day
L.S.

0.35
0.18
0.05
19.76

273.00
247.00
260.00
1.49
Total:
182.45

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

184.27
Cost for 1.00 Cum
Rate per One Cum:

DSR-12

Rs 4725.94

Page 398 of 2298

Rate as per DSR-12:

Rs 5269.10

Item Code: 11.8

Extra for making chequers on cement concrete floors etc
Code
0124
0114
9999

Description
LABOUR:Mason 2nd class
Beldar
Chequered plate etc.

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
L.S.

0.36
0.36
13.52

Add water charges @ 1% on

Rate
273.00
247.00
1.49
Total:
207.34

Add C.P & OH @15% on

209.41
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 24.08
Rs 24.10

Item Code: 11.9.1

40 mm thick marble chips flooring under layer 34 mm thick cc 1:2:4 and top layer 6mm thick etc. complete : Dark shade pigment
with ordinary cement.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
For under layer of 34mm thick
0296
Stone Aggregate (Single size): 12.5 mm nominal size
cum
0.227
1050.00
0297
Stone Aggregate (Single size): 10 mm nominal size
cum
0.076
1050.00
2202
Carriage of Stone aggregate below 40 mm nominal size
cum
0.303
87.60
0982
Coarse sand (zone III)
cum
0.151
1120.00
2203
Carriage of Coarse sand
cum
0.151
87.60
0367
Cement
tonne
0.109
5000.00
0367
Cement for slurry
tonne
0.02
5000.00
2209
Carriage of Cement
tonne
0.129
77.87
For top layer 6mm thick
0785
Marble chips
quint
0.872
180.00
2268
Carriage of Marble chips
cum
0.051
87.60
0367
Portland Cement
tonne
0.0405
5000.00
2209
Carriage of white Cement
tonne
0.0405
77.87
0784
Marble powder
cum
0.007
1000.00
0874
Dark shade pigmeny/3.5kg/ 50kg of cement
kilog
2.84
55.00
= 40.5x3.5/50=2.84kg.
9999
Carriage of pigment & marble powder etc.
L.S.
3.64
1.49
LABOUR:0124
Mason 2nd class
Day
1.79
273.00
0114
Beldar
Day
1.99
247.00
0101
Bhisti
Day
1.04
260.00
0139
Skilled Beldar (for floor rubbing etc.)
Day
1.00
260.00
0127
Mixer operator
Day
0.03
301.00
0002
Mixer
Day
0.03
800.00
0013
Machine for rubbing of floors
Day
1.60
300.00
9999
Sundries
L.S.
161.46
1.49
Total:
Add water charges @ 1% on
3982.00
Add C.P & OH @15% on
4021.82
Cost for 10.00 Sqm

DSR-12

Page 399 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 462.51
Rs 462.50

Item Code: 11.9.2

40 mm thick marble chips flooring under layer 34 mm thick cc 1:2:4 and top layer 6mm thick etc. complete : Light shade pigment
with white cement.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
11.009.01 40 mm thick marble chips flooring under layer 34 mm thick cc
10.00
462.51
1:2:4 and top layer 6mm thick
Add difference of cost due to using light shade pigment
instead of dark shade pigment
0875
Add for light shade pigment
kilog
2.84
70.00
0874
Deduct for dark shade pigment
kilog
-2.8484
55.00
Addd difference of cost due to using white cement instead of
grey cement
0368
Add for White Cement
tonne
0.0405
12000.00
0367
Deduct for grey cement
tonne
-0.0405
5000.00
Total:
Add water charges @ 1% except on [A] i.e on
325.64
Add C.P & OH @15% except on [A] i.e on
328.90
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 500.33
Rs 500.40

Item Code: 11.9.3

40 mm thick marble chips flooring under layer 34 mm thick cc 1:2:4 and top layer 6mm thick etc. complete : Medium shade
pigment with white cement.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 10 sqm
11.009.01 40 mm thick marble chips flooring under layer 34 mm thick cc
10.00
462.51
1:2:4 and top layer 6mm thick
Add difference of cost due to using light shade pigment
instead of dark shade pigment
0876
Green or blue medium shade pigment
kilog
2.84
60.00
0874
Deduct for dark shade pigment
kilog
-2.84
55.00
Add difference of cost due to using white Cement instead of
grey cement
0368
Add for White Cement
tonne
0.0203
12000.00
0367
Deduct for grey cement
tonne
-0.0203
5000.00
Total:
Add water charges @ 1% except on [A] i.e on
156.30
Add C.P & OH @15% except on [A] i.e on
157.86
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 480.66
Rs 480.65

Item Code: 11.9.4

40 mm thick marble chips flooring under layer 34 mm thick cc 1:2:4 and top layer 6mm thick etc. complete : White cement without
any pigment.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate

DSR-12

Page 400 of 2298

0296
0297
2202
0982
2203
0367
0367
2209
0785
2268
0368
2209
0784
0124
0114
0101
0139
0127
0002
0013
9999

MATERIALS
For under layer of 34mm thick
Stone Aggregate (Single size): 12.5 mm nominal size
Stone Aggregate (Single size): 10 mm nominal size
Carriage of Stone aggregate below 40 mm nominal size
Coarse sand (zone III)
Carriage of Coarse sand
Cement
Cement for slurry
Carriage of Cement
For top layer 6mm thick
Marble chips
Carriage of Marble chips
White Cement
Carriage of white Cement
Marble powder
LABOUR:Mason 2nd class
Beldar
Bhisti
Skilled Beldar (for floor rubbing etc.)
Mixer operator
Mixer
Machine for rubbing of floors
Sundries

cum
cum
cum
cum
cum
tonne
tonne
tonne

0.227
0.076
0.303
0.151
0.151
0.109
0.02
0.129

1050.00
1050.00
87.60
1120.00
87.60
5000.00
5000.00
77.87

quint
cum
tonne
tonne
cum

0.958
0.056
0.0405
0.0405
0.007

180.00
87.60
12000.00
77.87
1000.00

Day
Day
Day
Day
Day
Day
Day
L.S.

1.79
1.99
1.04
1.00
0.03
0.03
1.60
161.46

273.00
247.00
260.00
260.00
301.00
800.00
300.00
1.49
Total:
4119.80

Add water charges @ 1% on

Add C.P & OH @15% on

4161.00
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 478.52
Rs 478.50

Item Code: 11.9.5

40mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34mm thick CC 1:2:4 and top layer 6mm
thick with marble chips Light shade pigment with ordinary cement

Code
11.009.01

0875
0874

Details of Cost for : 10.00 Sqm

Description
Unit
Quantity
40 mm thick marble chips flooring under layer 34 mm thick cc
10.00
1:2:4 and top layer 6mm thick
Add difference of cost due to using light shade pigment
instead of dark shade pigment
Add for light shade pigment
kilog
2.84
Deduct for dark shade pigment
kilog
-2.84
Add water charges @ 1% except on [A] i.e on

Rate
462.51

70.00
55.00
Total:
42.60

Add C.P & OH @15% except on [A] i.e on

43.03
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 467.46
Rs 467.45

Item Code: 11.9.6

DSR-12

Page 401 of 2298

40mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34mm thick CC 1:2:4 and top layer 6mm
thick with marble chips Ordinary cement without any pigment

Code
11.009.01
0874
9999

Details of Cost for : 10.00 Sqm

Description
Unit
Quantity
40 mm thick marble chips flooring under layer 34 mm thick cc
10.00
1:2:4 and top layer 6mm thick
Deduct for dark shade pigment
kilog
-2.84
Deduct for carriage of pigment
L.S.
-7.38
Add water charges @ 1% except on [A] i.e on

Rate
462.51
55.00
1.49
Total:
-167.20

Add C.P & OH @15% except on [A] i.e on

-168.87
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 443.09
Rs 443.10

Item Code: 11.10.1

40mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 3 mm thick CC 1:2:4 and top layer 9mm
thick with marble chips Dark shade pigment with ordinary cement

Code

0296
0297
2202
0982
2203
0367
0367
2209
0788
2268
0367
2209
0784
0874
9999
0124
0114
0101
0139
0127
0002
0013
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIAL
For under layer of 31mm thick
Stone Aggregate (Single size): 12.5 mm nominal size
Stone Aggregate (Single size): 10 mm nominal size
Carriage of Stone aggregate below 40 mm nominal size
Coarse sand (zone III)
Carriage of Coarse sand
Cement
Cement for slurry
Carriage of Cement
For top layer 9mm thick
Marble chips large size above 4 mm White & black
Carriage of Marble chips
Portland Cement
Carriage of white Cement
Marble powder Dark shade pigment 3.5kg/ 50kg of cement
= 57.80x3.5/50=4.05kg.
Carriage of pigment & marble powder etc.
LABOURMason 2nd class
Beldar
Bhisti
Skilled Beldar (for floor rubbing etc.)
Mixer operator
Mixer
Machine for rubbing of floors
Sundries

Rate

cum
cum
cum
cum
cum
tonne
tonne
tonne

0.21
0.07
0.28
0.14
0.14
0.1005
0.02
0.1205

1050.00
1050.00
87.60
1120.00
87.60
5000.00
5000.00
77.87

quint
cum
tonne
tonne
cum
kilog

1.40
0.082
0.0578
0.0578
0.012
4.05

180.00
87.60
5000.00
77.87
1000.00
55.00

L.S.

5.46

1.49

Day
Day
Day
Day
Day
Day
Day
L.S.

1.79
1.99
1.04
1.00
0.03
0.03
1.60
134.55

273.00
247.00
260.00
260.00
301.00
800.00
300.00
1.49
Total:
4119.15

Add water charges @ 1% on

Add C.P & OH @15% on

4160.34
Cost for 10.00 Sqm
Rate per One Sqm:

DSR-12

Rs 478.44

Page 402 of 2298

Rate as per DSR-12:

Rs 478.45

Item Code: 11.10.2

40mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 3 mm thick CC 1:2:4 and top layer 9mm
thick with marble chips Light shade pigment with white cement.

Code
11.010.01

0875
0874

0368
0367

Description
40mm thick marble chips flooring, rubbed and polished to
granolithic finish, under layer 3
Add difference of cost due to using light shade pigment
instead of dark shade pigment
Add for light shade pigment
Deduct for dark shade pigment
Add difference of cost due to using white cement instead of
grey cement
Add for White Cement
Deduct for grey cement

Details of Cost for : 10.00 Sqm

Unit
Quantity
10.00

kilog
kilog

tonne
tonne

Rate
478.44

4.05
-4.05

70.00
55.00

0.0578
-0.0578

12000.00
5000.00
Total:
465.35

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

470.00
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 532.49
Rs 532.50

Item Code: 11.10.3

40mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 3 mm thick CC 1:2:4 and top layer 9mm
thick with marble chips Medium shade pigment with 50 % white cement and 50 % ordinary cement.

Code
11.010.01

0876
0874

0368
0367

Description
40mm thick marble chips flooring, rubbed and polished to
granolithic finish, under layer 3
Add difference of cost due to using light shade pigment
instead of dark shade pigment
Green or blue medium shade pigment
Deduct for dark shade pigment
Add difference of cost due to using white cement instead of
grey cement
Add for White Cement
Deduct for grey cement

Details of Cost for : 10.00 Sqm

Unit
Quantity
10.00

kilog
kilog

tonne
tonne

Rate
478.44

4.05
-4.05

60.00
55.00

0.0289
-0.0289

12000.00
5000.00
Total:
222.55

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

224.78
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 504.29
Rs 504.30

Item Code: 11.10.4

40mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 3 mm thick CC 1:2:4 and top layer 9mm
thick with marble chips White cement without any pigment.
Details of Cost for : 10.00 Sqm

DSR-12

Page 403 of 2298

Code

0296
0297
2202
0982
2203
0367
0367
2209
0788
2268
0368
2209
0784
0124
0114
0101
0139
0127
0002
0013
9999

Description
MATERIALS
FOR UNDER LAYER OF 31MM THICK
Stone Aggregate (Single size): 12.5 mm nominal size
Stone Aggregate (Single size): 10 mm nominal size
Carriage of Stone aggregate below 40 mm nominal size
Coarse sand (zone III)
Carriage of Coarse sand
Cement
Cement for slurry
Carriage of Cement
FOR TOP LAYER 9MM THICK
Marble chips large size above 4 mm White & black
Carriage of Marble chips
White Cement
Carriage of white Cement
Marble powder
LABOUR:Mason 2nd class
Beldar
Bhisti
Skilled Beldar (for floor rubbing etc.)
Mixer operator
Mixer
Machine for rubbing of floors
Sundries

Unit

Quantity

Rate

cum
cum
cum
cum
cum
tonne
tonne
tonne

0.21
0.07
0.28
0.14
0.14
0.1005
0.02
0.1205

1050.00
1050.00
87.60
1120.00
87.60
5000.00
5000.00
77.87

quint
cum
tonne
tonne
cum

1.40
0.082
0.0578
0.0578
0.012

180.00
87.60
12000.00
77.87
1000.00

Day
Day
Day
Day
Day
Day
Day
L.S.

1.79
1.99
1.04
1.00
0.03
0.03
1.60
161.46

273.00
247.00
260.00
260.00
301.00
800.00
300.00
1.49
Total:
4332.96

Add water charges @ 1% on

Add C.P & OH @15% on

4376.29
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 503.27
Rs 503.25

Item Code: 11.10.5

40mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 3 mm thick CC 1:2:4 and top layer 9mm
thick with marble chips Light shade pigment with ordinary cement.

Code
11.010.01

0875
0874

Details of Cost for : 10.00 Sqm

Description
Unit
Quantity
Details of cost for 10 sqm
40mm thick marble chips flooring, rubbed and polished to
10.00
granolithic finish, under layer 3
Add difference of cost due to using light
shade pigment instead of dark shade pigment
Add for light shade pigment
kilog
4.05
Black colour dark shade pigment
kilog
-4.05
Add water charges @ 1% except on [A] i.e on

Rate
478.44

70.00
55.00
Total:
60.75

Add C.P & OH @15% except on [A] i.e on

61.36
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 485.50
Rs 485.50

Item Code: 11.10.6

DSR-12

Page 404 of 2298

40mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 3 mm thick CC 1:2:4 and top layer 9mm
thick with marble chips Ordinary cement without any pigment.

Code

0296
0297
2202
0982
2203
0367
0367
2209
0788
2268
0367
2209
0784
0124
0114
0101
0139
0127
0002
0013
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS
For under layer 31mm thick
Stone Aggregate (Single size): 12.5 mm nominal size
Stone Aggregate (Single size): 10 mm nominal size
Carriage of Stone aggregate below 40 mm nominal size
Coarse sand (zone III)
Carriage of Coarse sand
Cement
Cement for slurry
Carriage of Cement
For top layer 9mm thick
Marble chips large size above 4 mm White & black
Carriage of Marble chips
Cement
Carriage of White Cement
Marble powder
LABOUR:Mason 2nd class
Beldar
Bhisti
Skilled Beldar (for floor rubbing etc.)
Mixer operator
Mixer
Machine for rubbing of floors
Sundries

Rate

cum
cum
cum
cum
cum
tonne
tonne
tonne

0.21
0.07
0.28
0.14
0.14
0.1005
0.02
0.1205

1050.00
1050.00
87.60
1120.00
87.60
5000.00
5000.00
77.87

quint
cum
tonne
tonne
cum

1.40
0.082
0.0578
0.0578
0.012

180.00
87.60
5000.00
77.87
1000.00

Day
Day
Day
Day
Day
Day
Day
L.S.

1.79
1.99
1.04
1.00
0.03
0.03
1.60
134.55

273.00
247.00
260.00
260.00
301.00
800.00
300.00
1.49
Total:
3888.26

Add water charges @ 1% on

Add C.P & OH @15% on

3927.14
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 451.62
Rs 451.60

Item Code: 11.11.1

40mm marble chips flooring under layer 28mm CC 1:2:4 top layer 12mm with chips laid in cement marble powder 3:1 Dark shade
with ordinary cement .
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFor under layer 0128mm thick
0296
12.5mm stone aggregate
cum
0.19
1050.00
0297
10mm stone aggregate
cum
0.06
1050.00
2202
Carriage of stone aggregate
cum
0.25
87.60
0982
Coarse sand
cum
0.125
1120.00
2203
Carriage of coarse sand
cum
0.125
87.60
0367
Portland Cement
tonne
0.0897
5000.00
0367
Cement for slurry
tonne
0.02
5000.00
2209
Carriage of cement
tonne
0.1097
77.87
For top layer 12mm thick
0788
Marble chips 7mm to 10mm size
quint
1.734
180.00
2268
Carriage of marble chips
cum
0.102
87.60
0367
Cement
tonne
0.081
5000.00
2209
Carriage of cement
tonne
0.081
77.87

DSR-12

Page 405 of 2298

0784
0874
9999
0124
0114
0101
0139
0127
0002
0013
9999

Marble powder
Dark shade pigment @ 3.5kg/50kg of cement
= 81x3.5/50=5.67kg
Carriage of pigment and marble powder etc.
LABOUR:Mason 2nd class
Beldar
Bhisti
Beldar for rubbing and polishing (Special Rate)
Mixer operator
Mixer
Machine
Sundries

cum
kilog

0.017
5.67

1000.00
55.00

L.S.

6.24

1.49

Day
Day
Day
Day
Day
Day
Day
L.S.

1.79
1.99
1.04
1.00
0.03
0.03
1.60
156.13

273.00
247.00
260.00
260.00
301.00
800.00
300.00
1.49
Total:
4319.17

Add water charges @ 1% on

Add C.P & OH @15% on

4362.36
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 501.67
Rs 501.65

Item Code: 11.11.2

40mm marble chips flooring under layer 28mm CC 1:2:4 top layer 12mm with chips laid in cement marble powder 3:1 Light shade
with white cement
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
11.011.01 40mm marble chips flooring under layer 28mm CC 1:2:4 top
10.00
501.67
layer 12mm with chips laid in cem
(A) Add difference of cost due to using light shade pigment
instead of dark shade pigment
0875
Add for Light shade pigment
kilog
5.67
70.00
0874
Deduct for Dark shade pigment
kilog
-5.67
55.00
Add Difference of cost due to using white cement instead of
grey cement
0368
Add for White cement
tonne
0.081
12000.00
0367
Deduct for Grey cement
tonne
-0.081
5000.00
Total:
Add water charges @ 1% except on [A] i.e on
652.05
Add C.P & OH @15% except on [A] i.e on
658.57
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 577.41
Rs 577.40

Item Code: 11.11.3

40mm marble chips flooring under layer 28mm CC 1:2:4 top layer 12mm with chips laid in cement marble powder 3:1 Medium
shade (Appox) 50 % White 50 % ordinary cement .
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
11.011.01 40mm marble chips flooring under layer 28mm CC 1:2:4 top
10.00
501.67
layer 12mm with chips laid in cem
Add difference of cost due to using Medium shade pigment
instead of dark shade pigment
0876
Add for Medium shade pigment
kilog
5.67
60.00
0874
Deduct for Dark shade pigment
kilog
-5.67
55.00

DSR-12

Page 406 of 2298

0368
0367

Add Difference of cost due to using white cement instead of

grey cement
Add for White cement
tonne
Deduct for Grey cement
tonne

0.0405
-0.0405

Add water charges @ 1% except on [A] i.e on

12000.00
5000.00
Total:
311.85

Add C.P & OH @15% except on [A] i.e on

314.97
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 537.89
Rs 537.85

Item Code: 11.11.4

40mm marble chips flooring under layer 28mm CC 1:2:4 top layer 12mm with chips laid in cement marble powder 3:1 White
cement without any pigment .
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFor under layer of 128mm thick
0296
12.5mm stone aggregate
cum
0.19
1050.00
0297
10mm stone aggregate
cum
0.06
1050.00
2202
Carriage of stone aggregate
cum
0.25
87.60
0982
Coarse sand
cum
0.125
1120.00
2203
Carriage of coarse sand
cum
0.125
87.60
0367
Cement
tonne
0.0897
5000.00
0367
Cement for slurry
tonne
0.02
5000.00
2209
Carriage of cement
tonne
0.1097
77.87
For top layer 12mm thick
0788
Marble chips 7mm to 10mm size
quint
1.916
180.00
2268
Carriage of marble chips
cum
0.1128
87.60
0368
Cement
tonne
0.081
12000.00
2209
Carriage of cement
tonne
0.081
77.87
0784
Marble powder
cum
0.017
1000.00
LABOUR:0124
Mason 2nd class
Day
1.79
273.00
0114
Beldar
Day
1.99
247.00
0101
Bhisti
Day
1.04
260.00
0139
Beldar for rubbing and polishing (Special Rate)
Day
1.00
260.00
0127
Mixer operator
Day
0.03
301.00
0002
Mixer
Day
0.03
800.00
0013
Machine
Day
1.60
300.00
9999
Sundries
L.S.
134.55
1.49
Total:
Add water charges @ 1% on
4566.57
Add C.P & OH @15% on
4612.24
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 530.41
Rs 530.40

Item Code: 11.11.5

40mm marble chips flooring under layer 28mm CC 1:2:4 top layer 12mm with chips laid in cement marble powder 3:1 Light shade
pigment with Ordinary cement .
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate

DSR-12

Page 407 of 2298

11.011.01

0875
0874

40mm marble chips flooring under layer 28mm CC 1:2:4 top

layer 12mm with chips laid in cem
Add difference of cost due to using Light shade pigment
instead of dark shade
Pigment
kilog
Add for Light shade pigment
kilog

10.00

501.67

5.67
-5.67

70.00
55.00
Total:
85.05

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

85.90
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 511.55
Rs 511.55

Item Code: 11.11.6

40mm marble chips flooring under layer 28mm CC 1:2:4 top layer 12mm with chips laid in cement marble powder 3:1 Ordinary
cement without any pigment .
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFor under layer 28mm thick
0296
12.5mm stone aggregate
cum
0.19
1050.00
0297
10mm stone aggregate
cum
0.06
1050.00
2202
Carriage of stone aggregate
cum
0.25
87.60
0982
Coarse sand
cum
0.125
1120.00
2203
Carriage of coarse sand
cum
0.125
87.60
0367
Cement
tonne
0.0897
5000.00
0367
Cement for slurry
tonne
0.02
5000.00
2209
Carriage of cement
tonne
0.1097
77.87
For top layer 12mm thick
0788
Marble chips 7mm to 10mm size
quint
1.916
180.00
2268
Carriage of marble chips
cum
0.1128
87.60
0367
Cement
tonne
0.081
5000.00
2209
Carriage of cement
tonne
0.081
77.87
0784
Marble powder
cum
0.017
1000.00
LABOUR:0124
Mason 2nd class
Day
1.79
273.00
0114
Beldar
Day
1.99
247.00
0101
Bhisti
Day
1.04
260.00
0139
Beldar for rubbing and polishing (Special Rate)
Day
1.00
260.00
0127
Mixer operator
Day
0.03
301.00
0002
Mixer
Day
0.03
800.00
0013
Machine
Day
1.60
300.00
9999
Sundries
L.S.
134.55
1.49
Total:
Add water charges @ 1% on
3999.57
Add C.P & OH @15% on
4039.57
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 464.55
Rs 464.55

Item Code: 11.12.1.1

Marble chips skirting (up to 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse
sand) : Dark shade pigment with ordinary cement.
Details of Cost for : 10.00 Sqm

DSR-12

Page 408 of 2298

Code

03.008

0785
2268
0367
2209
0784
0874
9999
0124
0114
0101
0139
9999

Description
MATERIALSFor under layer of 12mm thick
Cement mortar 1:3 (1 cement : 3 coarse sand)
rounding = 0.03 =0.174 cum (Rate as per item No.3.8)
Top layer 6mm thick
Marble chips
Carriage of marble chips
Cement
Carriage of cement
Marble powder
Dark shade pigment @ 3.5kg/50kg of cement
=40.5x3.5/50=2.84kg.
Carriage of pigment & marble powder etc.
LABOUR:Mason 2nd class
Beldar
Bhisti
Beldar for rubbing and polishing (Special Rate)
Sundries

Unit

Quantity

Rate

0.174

4145.53

0.872
0.051
0.0405
0.0405
0.007
2.84

180.00
87.60
5000.00
77.87
1000.00
55.00

L.S.

3.64

1.49

Day
Day
Day
Day
L.S.

3.00
3.00
1.00
7.00
201.89

273.00
247.00
260.00
260.00
1.49
Total:
5197.84

quint
cum
tonne
tonne
cum
kilog

Add water charges @ 1% on

Add C.P & OH @15% on

5249.82
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 603.73
Rs 603.75

Item Code: 11.12.1.2

Marble chips skirting (up to 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse
sand) : Light shade pigment with white cement.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
(A) Details of cost for 10 sqm.
11.012.01.1 Marble chips skirting (up to 30 cm height) 18 mm thick with
10.00
603.73
under layer 12 mm thick in cem
Add difference of cost due to using light shade pigment
instead of dark shade pigment
0875
Add for Light shade pigment
kilog
2.84
70.00
0874
Deduct for Dark shade pigment
kilog
-2.84
55.00
Add Difference of cost due to using white cement instead of
grey cement
0368
Add for White cement
tonne
0.0405
12000.00
0367
Deduct for Grey cement
tonne
-0.0405
5000.00
Total:
Add water charges @ 1% except on [A] i.e on
326.10
Add C.P & OH @15% except on [A] i.e on
329.36
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 641.61
Rs 641.65

Item Code: 11.12.1.3

Marble chips skirting (up to 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse
sand) : Medium shade pigment with white cement.
Details of Cost for : 10.00 Sqm

DSR-12

Page 409 of 2298

Code
Description
11.012.01.1 Marble chips skirting (up to 30 cm height) 18 mm thick with
under layer 12 mm thick in cem
Add difference of cost due to using medium shade pigment
instead of dark shade pigment
0876
Green or blue medium shade pigment
0874
Deduct for Dark shade pigment
Add Difference of cost due to using white cement instead of
grey cement
0368
Add for White cement
0367
Deduct for Grey cement

Unit

Quantity
10.00

Rate
603.73

kilog
kilog

2.84
-2.84

60.00
55.00

0.0203
-0.0203

12000.00
5000.00
Total:
156.30

tonne
tonne

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

157.86
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 621.88
Rs 621.90

Item Code: 11.12.1.4

Marble chips skirting .. 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) : White cement
without any pigment.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSFor under layer of 12mm thick
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.174
4145.53
Top layer 6mm thick
0785
Marble chips
quint
0.958
180.00
2268
Carriage of marble chips
cum
0.056
87.60
0368
White cement
tonne
0.0405
12000.00
2209
Carriage of white cement
tonne
0.0405
77.87
0784
Marble powder
cum
0.007
1000.00
LABOUR:0124
Mason 2nd class
Day
3.00
273.00
0114
Beldar
Day
3.00
247.00
0101
Bhisti
Day
1.00
260.00
0139
Beldar for rubbing and polishing (Special Rate)
Day
7.00
260.00
9999
Sundries
L.S.
201.89
1.49
Total:
Add water charges @ 1% on
5335.64
Add C.P & OH @15% on
5389.00
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 619.74
Rs 619.75

Item Code: 11.12.1.5

Marble chips skirting .. 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) : Light shade
pigment with Orinary cement .
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
11.012.01.1 Marble chips skirting (up to 30 cm height) 18 mm thick with
10.00
603.73
under layer 12 mm thick in cem
Add difference of cost due to using Light shade pigment
instead of dark shade pigment

DSR-12

Page 410 of 2298

0875
0874

Add for Light shade pigment

Deduct for Dark shade pigment

kilog
kilog

2.84
-2.84

Add water charges @ 1% except on [A] i.e on

70.00
55.00
Total:
42.60

Add C.P & OH @15% except on [A] i.e on

43.03
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 608.68
Rs 608.70

Item Code: 11.12.1.6

Marble chips skirting (up to 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 Ordinary cement
without any pigment.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 10 sqm.
11.012.01.1 Marble chips skirting (up to 30 cm height) 18 mm thick with
10.00
603.73
under layer 12 mm thick in cem
Less cost of dark shade pigment
0874
Deduct for dark shade pigment
kilog
-2.84
55.00
9999
Deduct for Carriage of pigment
L.S.
-7.38
1.49
Total:
Add water charges @ 1% except on [A] i.e on
-167.20
Add C.P & OH @15% except on [A] i.e on
-168.87
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 584.31
Rs 584.35

Item Code: 11.13.1

Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS:
Glass strip=10m
Add 10% for wastage=1m
Total=11m
1149
40x4 mm Glass Strips
metre
11.00
9999
Sundries
L.S.
2.73
LABOUR:
0124
Mason II class
Day
0.25
0114
Beldar
Day
0.25
9999
Sundries
L.S.
13.52
Add water charges @ 1% on

Rate

9.00
1.49
273.00
247.00
1.49
Total:
253.21

Add C.P & OH @15% on

255.74
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 29.41
Rs 29.40

Item Code: 11.14

Extra laying terrazo flooring on staircase treads
Details of Cost for : 10.00 Sqm

DSR-12

Page 411 of 2298

Code
0124
0114
0115

Description
LABOURMason 2nd class
Beldar
Coolie

Unit

Quantity

Rate

Day
Day
Day

0.30
0.30
0.30

273.00
247.00
247.00
Total:
230.10

Add water charges @ 1% on

Add C.P & OH @15% on

232.40
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 26.73
Rs 26.75

Item Code: 11.15.1

Crazy marble stone flooring i/c filling the gaps with light shade pigment withwhite cement marble powder mixture, and under layer
25 mm thick CC 1 : 2 : 4 :- 18mm thick crazy marble stone white, black or as specified.

Code
11.007

0367
2209
0114

2710
0368
0784
0875
0785
2268
2209
9999
2216
0123
0114
0115
0139
9999
0101
0013

Description
Under layer 25mm thick of cement
CC pavement with 1:2:4 with 20mm nominal size stone
aggregate ....
(Rate same as in item no. 11.7)
Cement slurry for subgrade and under large cement
Carriage of cement
Labour for applying cement slurry
Beldar
Top layer with marble pieces and gap filling with marble
powder mixture
Marble pieces for crazy flooring
(Assume 70% of marble stone are and 30% of joint
filer/mixture)
7.00sqmx0.02m = 0.14 cum
0.872x0.14/0.051 = 2.40q
White cement
Marble powder
Light shade pigment @ 3.5kg/50kg of cement
= 40.5x3.5/50=2.84kg
Marble chips
Carriage of marble chips
Carriage of cement
Carriage of pigment & marble powder
Carriage of marble stone pieces
Labour for finishing, polishing and fixingMason 1st class
Beldar
Coolie
Beldar for rubbing and polishing (Special Rate)
Sundries including carborandum etc.
Bhisti
Machine

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

0.25

4725.94

tonne
tonne

0.04
0.04

5000.00
77.87

Day

0.50

247.00

quint
tonne
cum
kilog

2.40
0.0405
0.007
2.84

130.00
12000.00
1000.00
70.00

quint
cum
tonne
L.S.
tonne

0.872
0.051
0.0405
3.64
0.24

180.00
87.60
77.87
1.49
77.87

Day
Day
Day
Day
L.S.
Day
Day

1.20
1.00
1.00
5.00
134.55
0.54
4.00

301.00
247.00
247.00
260.00
1.49
260.00
300.00
Total:
5215.18

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

5267.33
Cost for 10.00 Sqm
Rate per One Sqm:

DSR-12

Rs 723.89

Page 412 of 2298

Rate as per DSR-12:

Rs 773.45

Item Code: 11.16.1

Precast terrazo tiles 22mm in floors on 20mm thick cement mortar 1:4 Light shades using white cement .
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS:
1201
Terrazo tiles including 10% wastage
sqm
11.00
9999
Carriage of tiles
L.S.
40.43
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
Cum
0.224
(Rate as per item No. 3.9)
0367

Grey cement for slurry @ 4.4Kg/sqm.

0368

White cement for grouting

2209
0875

Carraige of Cement
Light shade pigment

0124
0115
0139
0101
0013
9999

LABOUR :
Mason (brick layer) 2nd class
Coolie
Skilled Beldar (for floor rubbing etc.)
Bhisti
Machine for rubbing of floors
Sundries including carborandum stone etc.

Rate

240.00
1.49
3485.41

tonne

0.044

5000.00

tonne
tonne

0.044
0.088

12000.00
77.87

kilog

3.08

70.00

Day
Day
Day
Day
Day

1.60
2.00
1.00
1.00
1.60

273.00
247.00
260.00
260.00
300.00

L.S.

161.98

1.49
Total:
6623.57

Add water charges @ 1% on

Add C.P & OH @15% on

6689.81
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 769.33
Rs 769.35

Item Code: 11.16.2

Precast terrazo tiles 22mm thick laid in floors, and landings, on 20mm thick bed of cement mortar 1:4 Medium shade using
50%white cement and 50% ordinary cement.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS1202
Terrazo tiles including 10% wastage
sqm
11.00
220.00
9999
Carriage of tiles
L.S.
40.43
1.49
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.224
3485.41
(Rate as per item No. 3.9)
Grey cement (i) for slurry @ 4.4Kg/sqm =44kg
+ (ii) 50% for grouting = 22kg. Total
=66kg or 0.066 tonne
0367
Grey cement
tonne
0.066
5000.00
0368
50% white cement for grouting
tonne
0.022
12000.00
2209
Carriage of cement
tonne
0.088
77.87
0876
Medium shade pigment
kilog
3.08
60.00
LABOUR
0124
Mason 2nd class
Day
1.60
273.00
0115
Coolie
Day
2.00
247.00
0139
Beldar for rubbing and polishing (Special Rate)
Day
1.00
260.00

DSR-12

Page 413 of 2298

0101
0013
9999

Bhisti
Machine
Sundries including carborandum stone etc.

Day
Day
L.S.

1.00
1.60
161.98

Add water charges @ 1% on

260.00
300.00
1.49
Total:
6218.77

Add C.P & OH @15% on

6280.96
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 722.31
Rs 722.30

Item Code: 11.16.3

Precast terrazo tiles 22mm thick in floors, and landings,on 20mm thick bed of cement mortar 1:4 Dark shade using ordinary
cement.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS1203
Terrazo tiles including 10% wastage
sqm
11.00
200.00
9999
Carriage of tiles
L.S.
40.43
1.49
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.224
3485.41
Rate as per item No. 3.9
Ordinary cement for(i) Cement slurry @
4.4kg/sqm = 44kg+ (ii) Grouting = 44 kg.
Total - 88kg or 0.088 tonne
0367
Ordinary cement
tonne
0.088
5000.00
2209
Carriage of cement
tonne
0.088
77.87
0874
Dark shade pigment
kilog
3.08
55.00
LABOUR
0124
Mason 2nd class
Day
1.60
273.00
0115
Coolie
Day
2.00
247.00
0139
Beldar for rubbing and polishing (Special Rate)
Day
1.00
260.00
0101
Bhisti
Day
1.00
260.00
0013
Machine
Day
1.60
300.00
9999
Sundries including carborandum stone etc.
L.S.
161.98
1.49
Total:
Add water charges @ 1% on
5829.37
Add C.P & OH @15% on
5887.66
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 677.08
Rs 677.10

Item Code: 11.16.4

Precast terrazo tiles 22mm thick laid in floors, and landings, on 20mm thick bed of cement mortar 1:4 Ordinary cement without any
pigment.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS1203
Terrazo tiles including 10% wastage
sqm
11.00
200.00
9999
Carriage of tiles
L.S.
40.43
1.49
Cement mortar 1:4(1Cement: 4 Coarse sand)
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.224
3485.41
Ordinary cement for (i) Cement slurry @ 4.4kg/sqm = 44kg+
(ii) Grouting = 44 kg.Total = 88kg or 0.088 tonne
0367
Ordinary cement
tonne
0.088
5000.00
2209
Carriage of cement
tonne
0.088
77.87

DSR-12

Page 414 of 2298

0874
0124
0115
0139
0101
0013
9999
0874

Dark shade pigment

LABOUR
Mason 2nd class
Coolie
Beldar for rubbing and polishing (Special Rate)
Bhisti
Machine
Sundries including carborandum stone etc.
Less for dark shade pigment [3.08+2.84(for

kilog

3.08

55.00

Day
Day
Day
Day
Day
L.S.
kilog

1.60
2.00
1.00
1.00
1.60
161.98
-5.92

273.00
247.00
260.00
260.00
300.00
1.49
55.00
Total:
5503.77

Add water charges @ 1% on

Add C.P & OH @15% on

5558.81
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 639.26
Rs 639.25

Item Code: 11.17

Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width.
Code
0124
0115
0139

Description
LABOUR:
Mason II class
Coolie
Skilled Beldar

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
Day

0.22
0.22
0.65

Add water charges @ 1% on

Rate
273.00
247.00
260.00
Total:
283.40

Add C.P & OH @15% on

286.23
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 32.92
Rs 32.90

Item Code: 11.18.1

Precast terrazo tiles 22 mm thick in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3
Light shade using white cement.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
1201
Terrazo tiles light shade using white cement 20mm thic
sqm
11.00
240.00
9999
Sundries
L.S.
40.43
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
Cum
0.144
4145.53
0368
White cement
tonne
0.066
12000.00
2209
Carriage of cement
tonne
0.066
77.87
0875
Light shade pigment
kilog
4.62
70.00
LABOUR:
0124
Mason II class
Day
3.25
273.00
0115
Coolie
Day
3.25
247.00
0139
Skilled Beldar
Day
7.60
260.00
9999
Sundries
L.S.
161.46
1.49
Total:
Add water charges @ 1% on
8324.32
Add C.P & OH @15% on
8407.56
Cost for 10.00 Sqm

DSR-12

Page 415 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 966.87
Rs 966.85

Item Code: 11.18.2

Precast terrazo tiles 22 mm thick in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3
Medium shades using 50% white cement and 50% ordinary cement.

Code
1202
9999
03.008
0368
0367
2209
0876
0124
0115
0139
9999

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

MATERIALS:
Precast Terrazo tiles 22mm thick (medium shade)
Sundries
Cement mortar 1:3 (1 cement : 3 coarse sand)
White cement
Cement
Carriage of cement
Medium shade pigment
LABOUR:
Mason II class
Coolie
Skilled Beldar

sqm
L.S.
Cum
tonne
tonne
tonne
kilog

11.00
40.43
0.144
0.033
0.033
0.066
4.62

220.00
1.49
4145.53
12000.00
5000.00
77.87
60.00

Day
Day
Day

3.25
3.25
7.60

273.00
247.00
260.00

L.S.

161.46

1.49
Total:
7827.12

Add water charges @ 1% on

Add C.P & OH @15% on

7905.39
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 909.12
Rs 909.10

Item Code: 11.18.3

Precast terrazo tiles 22 mm thick in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3
Dark shade using ordinary cement.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS1203
Precast terrazzo tiles 22 mm thick (dark shade)
sqm
11.00
200.00
including wastage & breakage
9999
Carriage of tiles
L.S.
40.43
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.144
4145.53
Rate as per item No. 3.8
0367
Grey cement for slurry
tonne
0.066
5000.00
2209
Carriage of cement
tonne
0.066
77.87
0874
Dark shade pigment
kilog
4.62
55.00
Labour0124
Mason 2nd class
Day
3.25
273.00
0115
Coolie
Day
3.25
247.00
0139
Beldar for rubbing and polishing (Special
Day
7.60
260.00
Rate)
9999
Sundries including carborandum stone and
L.S.
161.46
1.49
Total:
Add water charges @ 1% on
7353.02

DSR-12

Page 416 of 2298

Add C.P & OH @15% on

7426.55
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 854.05
Rs 854.05

Item Code: 11.18.4

Precast terrazo tiles 22 mm thick in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3
Ordinary cement without any pigment.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
1203
Terrazo tiles 22m thick
sqm
11.00
200.00
9999
Sundries
L.S.
40.43
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
Cum
0.144
4145.53
0367
Cement
tonne
0.066
5000.00
0874
Dark Shade Pigment
kilog
4.62
55.00
2209
Carraige of Cement
tonne
0.066
77.87
LABOUR:
0124
Mason II class
Day
3.25
273.00
0115
Coolie
Day
3.25
247.00
0139
Skilled Beldar
Day
7.60
260.00
9999
Sundries
L.S.
161.46
1.49
0874
Less Dark Shade Pigment [4.62+2.84] for tiles
kilog
-7.46
55.00
Total:
Add water charges @ 1% on
6942.72
Add C.P & OH @15% on
7012.15
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 806.40
Rs 806.40

Item Code: 11.19.1

Chquered precast terrazo tiles 22mm in floors on 20mm thick CM 1:4 Light shade using white cement .
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS1227
Terrazo tiles including 10% wastage
sqm
11.00
300.00
9999
Carriage of tiles
L.S.
40.43
1.49
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
Cum
0.224
3485.41
0367
Grey cement for slurry @ 4.4kg/sqm.
tonne
0.044
5000.00
0368
White cement for grouting
tonne
0.044
12000.00
2209
Carriage of cement
tonne
0.088
77.87
0875
Light shade pigment
kilog
3.08
70.00
LABOUR0124
Mason 2nd class
Day
1.60
273.00
0115
Coolie
Day
2.00
247.00
0139
Beldar for rubbing and polishing (Special Rate)
Day
1.00
260.00
0101
Bhisti
Day
1.00
260.00
0013
Machine
Day
1.60
300.00
9999
Sundries including carborandum stone etc.
L.S.
161.98
1.49
Total:
Add water charges @ 1% on
7283.57
Add C.P & OH @15% on
7356.41
Cost for 10.00 Sqm

DSR-12

Page 417 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 845.99
Rs 846.00

Item Code: 11.19.2

Chquered precast terrazo tiles 22mm in floors on 20mm thick CM 1:4 Medium shade using 50% white and 50 % ordinary cement .

Code
1228
9999
03.009

0367
0368
2209
0876
0124
0115
0139
0101
0013
9999

Description
MATERIALSTerrazo tiles including 10% wastage
Carriage of tiles
Rate as per item No. 3.9
Cement mortar 1:4 (1 cement : 4 coarse sand).
Grey cement (i) for slurry @ 4.4kg/sqm =44 kg.+
(ii) 50% for grouting = 22kg. Total
=66kg or 0.066 tonne
Grey cement
50% white cement for grouting
Carriage of cement
Medium shade pigment
Labour and sundries
Mason 2nd class
Coolie
Beldar for rubbing and polishing (Special Rate)
Bhisti
Machine
Sundries including carborandum stone etc.

Details of Cost for : 10.00 Sqm

Unit
Quantity
sqm
L.S.

tonne
tonne
tonne
kilog
Day
Day
Day
Day
Day
L.S.

Rate

11.00
40.43

260.00
1.49

0.224

3485.41

0.066
0.022
0.088
3.08

5000.00
12000.00
77.87
60.00

1.60
2.00
1.00
1.00
1.60
161.98

273.00
247.00
260.00
260.00
300.00
1.49
Total:
6658.77

Add water charges @ 1% on

Add C.P & OH @15% on

6725.36
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 773.42
Rs 773.40

Item Code: 11.19.3

Chquered precast terrazo tiles 22mm in floors on 20mm thick CM 1:4 Dark shade using ordinary cement .
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS1229
Terrazo tiles including 10% wastage
sqm
11.00
9999
Carriage of tiles
L.S.
40.43
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.224
Rate as per item No. 3.9
Ordinary cement for (i) Cement slurry @ 4.4kg/sqm = 44kg+

0367
2209
0874
0124
0115
0139
0101
0013
9999

DSR-12

(ii) Grouting = 44 kg.Total = 88kg or 0.088 tonne

Ordinary cement
Carriage of cement
Dark shade pigment
Labour & sundries
Mason 2nd class
Coolie
Beldar for rubbing and polishing (Special Rate)
Bhisti
Machine
Sundries including carborandum stone etc.

tonne
tonne
kilog
Day
Day
Day
Day
Day
L.S.

Rate
225.00
1.49
3485.41

0.088
0.088
3.08

5000.00
77.87
55.00

1.60
2.00
1.00
1.00
1.60
161.98

273.00
247.00
260.00
260.00
300.00
1.49

Page 418 of 2298

Add water charges @ 1% on

Total:
6104.37

Add C.P & OH @15% on

6165.41
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 709.02
Rs 709.00

Item Code: 11.19.4

Chquered precast terrazo tiles 22mm in floors on 20mm thick CM 1:4 Ordinary cement without shade
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS1229
Terrazo tiles including 10% wastage
sqm
11.00
9999
Carriage of tiles
L.S.
40.43
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.224
Rate as per item No. 3.9
Ordinary cement for (i) Cement slurry @ 4.4kg/sqm = 44kg+
(ii) Grouting = 44 kg.Total = 88kg or 0.088 tonne
0367
Ordinary cement
tonne
0.088
2209
Carriage of cement
tonne
0.088
0874
Dark shade pigment
kilog
3.08
LABOUR & SUNDRIES
0124
Mason 2nd class
Day
1.60
0115
Coolie
Day
2.00
0139
Beldar for rubbing and polishing (Special Rate)
Day
1.00
0101
Bhisti
Day
1.00
0013
Machine
Day
1.60
9999
Sundries including carborandum stone etc.
L.S.
162.59
0874
Black colour dark shade pigment
kilog
-5.92
Add water charges @ 1% on

Rate
225.00
1.49
3485.41

5000.00
77.87
55.00
273.00
247.00
260.00
260.00
300.00
1.49
55.00
Total:
5779.68

Add C.P & OH @15% on

5837.48
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 671.31
Rs 671.30

Item Code: 11.20.1

Chequerred precast CC tiles 22mm thick in footpath and courtyard on 20mm thick bed of CM 1:4 Light shade using white cement.

Code
7070
9999
03.009
0367
0368
2209
0875
0124
0115
0101

DSR-12

Description
MATERIALSChequerred C.C. tiles including 10% wastage
Carriage of tiles
Cement mortar 1:4 (1 cement : 4 coarse sand).
Rate as per item no. 3.9
Grey cement slury @ 4.4kg @sqm,
White cement for grouting
Carriage of cement
Light shade pigment
LABOURMason 2nd class
Coolie
Bhisti

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

sqm
L.S.

11.00
40.43
0.22

470.00
1.49
3485.41

tonne
tonne
tonne
kilog

0.044
0.048
0.092
3.08

5000.00
12000.00
77.87
70.00

1.60
2.00
1.00

273.00
247.00
260.00

Day
Day
Day

Page 419 of 2298

Add water charges @ 1% on

Total:
8206.59

Add C.P & OH @15% on

8288.66
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 953.20
Rs 953.20

Item Code: 11.20.2

Chequerred precast CC tiles 22mm thick in footpath and courtyard on 20mm thick bed of CM 1:4 Medium shade using 50 % white
cement 50 % grey cement.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS7237
Chequered cement concrete tiles i/c10% wastage sqm
Sqm
11.00
360.00
9999
Carriage of tiles
L.S.
40.43
1.49
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.22
3485.41
Rate as per item no. 3.9
Grey cement for slurry @ 4.4Kg/sqm. = 44 kg.
0367
+ grey cement for grouting 2.4kg/sqm. = 24 kg.
tonne
0.068
5000.00
Total = 68 kg.
0368
White cement for grouting @ 2.4kg/sqm. = 24 tonne
tonne
0.024
12000.00
2209
Carriage of cement
tonne
0.092
77.87
0876
Medium shade pigment
kilog
3.08
60.00
LABOUR0124
Mason 2nd class
Day
1.60
273.00
0115
Coolie
Day
2.00
247.00
0101
Bhisti
Day
1.00
260.00
Total:
Add water charges @ 1% on
6797.79
Add C.P & OH @15% on
6865.77
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 789.56
Rs 789.55

Item Code: 11.20.3

Chequerred precast CC tiles 22mm thick in footpath and courtyard on 20mm thick bed of CM 1:4 Dark shade using ordinary
cement.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS7236
Chequered cement concrete tiles 10% wastage
sqm
11.00
230.00
9999
Carriage of tiles
L.S.
40.43
1.49
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.22
3485.41
Rate as per item no. 3.9
Grey cement for slurry @ 4.4Kg/sqm. = 44 kg.
0367
+ For grouting = 48 kg. Total=92 kg. say 0.092 tonne
tonne
0.092
5000.00
2209
Carriage of cement
tonne
0.092
77.87
0874
Dark shade pigment
kilog
3.08
55.00
LABOUR0124
Mason 2nd class
Day
1.60
273.00
0115
Coolie
Day
2.00
247.00
0101
Bhisti
Day
1.00
260.00
Total:
Add water charges @ 1% on
5184.39

DSR-12

Page 420 of 2298

Add C.P & OH @15% on

5236.23
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 602.17
Rs 602.15

Item Code: 11.20.4

Chequerred precast CC tiles 22mm thick in footpath and courtyard on 20mm thick bed of CM 1:4 Ordinary cement without any
pigment.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS7236
Chequerred C.C. tiles including 10% wastage
sqm
11.00
230.00
9999
Carriage of tiles
L.S.
40.43
1.49
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.22
3485.41
(Rate as per item No.3.9)
Grey cement for slurry @ 4.4kg/sqm. = 44 kg
0367
For grouting = 48 kg. Total = 92 Kg. Say 0.092 tonne
tonne
0.092
5000.00
2209
Carriage of cement
tonne
0.092
77.87
0874
Dark shade pigment
kilog
3.08
55.00
LABOUR0124
Mason 2nd class
Day
1.60
273.00
0115
Coolie
Day
2.00
247.00
0101
Bhisti
Day
1.00
260.00
0874
Less for dark shade pigment [3.08+2.84(for tiles)]
kilog
-5.92
55.00
Total:
Add water charges @ 1% on
4858.79
Add C.P & OH @15% on
4907.38
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 564.35
Rs 564.35

Item Code: 11.21.1.1

P/L 10mm thick acid or alkali resistant tiles in flooring bed of 10mm thick CM 1:4 Acid and alkali resistant tiles

Code

7077
9999
03.009
9999
0367

7024
0367
0123
0115
9999

DSR-12

Description

Details of Cost for : 1.00 Sqm

Unit
Quantity

MATERIALSAcid proof tiles of size 300x300mm, 10mm

thick =11.11 nos+
Add wastage and breakage @ 2.5% = 0.28 nos.
= 11.39 nos. Say 12 nos.
Acid proof tiles
10 No
Carriage
L.S.
Cement mortar 1:4 (1 cement : 4 coarse sand).
Mortar for pointing in acid/alkali resistant cement
L.S.
Cement for slurry over bed @ 3.3kg per sqm.
tonne
Difference of cost for using acid proof cement instead of
ordinary cement
Acid proof cement
tonne
Less Ordinary Cement
tonne
LABOURMason 1 st class
Day
Coolie
Day
Sundries including carriage of cement etc.
L.S.

Rate

12.00
6.24
0.012
40.43
0.0033

520.00
1.49
3485.41
1.49
5000.00

0.0079
-0.0079

8100.00
5000.00

0.20
0.20
26.91

301.00
247.00
1.49

Page 421 of 2298

Add water charges @ 1% on

Total:
926.05

Add C.P & OH @15% on

935.31
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1075.61
Rs 1075.60

Item Code: 11.21.2.1

P/L 10mm thick acid or alkali resistant tiles in dado/skirting 12mm thick CM 1:4 Acid and alkali resistant tiles

Code

Details of Cost for : 1.00 Sqm

Unit
Quantity

Description

Rate

MATERIALSAcid proof tiles of size 300x300mm, 10mm thick = 11.11nos.+

7077
9999
03.009

7024
0367
9999
7024
0123
0115
9999

Add wastage and breakage @ 2.5% = 0.28 nos.

= 11.39 nos. Say 12 nos.
Acid proof tiles size 300x300mm, 10mm thick 10 Nos
10 No
Carriage of tiles
L.S.
Cement mortar 1:4 (1 cement : 4 coarse sand).
(Rate as per item No 3.9)
Difference of cost for using^acid proof cement instead of
ordinary cement
Acid proof cement
tonne
Less Ordinary Cement
tonne
Mortar for pointing in acid proof cement
L.S.
Acid proof cemen for slurry over plaster 3.3kg/sqm.
tonne
LABOURMason 1 class
Day
Coolie
Day
Sundries including carriage of cement etc.
L.S.

12.00
6.24
0.014

520.00
1.49
3485.41

0.0086
-0.0086
40.43
0.0033

8100.00
5000.00
1.49
8100.00

0.25
0.25
26.91

301.00
247.00
1.49
Total:
972.83

Add water charges @ 1% on

Add C.P & OH @15% on

982.56
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1129.94
Rs 1129.95

Item Code: 11.22.1.1

Tile work in skirting risers and dado over 12mm thick cement mortar 1:3 jointed cement slurry Marble tiles (polished) Rajnagar : 8
mm thick.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
2751
8 mm thick marble tiles (polished) Raj Nagar including sqm
1.061
340.00
wastage
9999
Carriage of tiles
L.S.
3.90
1.49
12mm thick cement mortar 1:3(1 cement : 3 Coarse sand)
03.008
9999
0367
9999

DSR-12

Cement mortar 1:3 (1 cement : 3 coarse sand)

Mortar for pointing in white cement
Cement for slurry @3.3 kg/sqm
Pigment
LABOUR:

Cum
L.S.
tonne
L.S.

0.014
25.35
0.0033
2.08

4145.53
1.49
5000.00
1.49

Page 422 of 2298

0123
0115
9999

Mason 1st class

Coolie
Sundries including carriage of cement etc.,

Day
Day
L.S.

0.25
0.25
16.90

Add water charges @ 1% on

301.00
247.00
1.49
Total:
644.14

Add C.P & OH @15% on

650.58
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 748.17
Rs 748.15

Item Code: 11.23.1

Marble stone flooring with 18mm thick marble stone over 20mm thick base of CM 1:4 Makrana White Second quality.

Code

6001
03.009
0367

9999

0123
0114
0115
0139
0013
9999

Description
MATERIALS18mm thick marble slab = 10.00sqm.+
Add for wastage 15% = 1.50sqm.
Total = 11.50sqm.
Makrana white 2nd quality 18 mm thick marble slab
Cement mortar 1:4 (1 cement : 4 coarse sand).
( Rate as per item No. 3.9)
Cement for slurry @4.4kg/sqm.
(i) for bedding = 44 kg+ (ii) for jointing = 6 Kg.
Total = 50 Kg.
Carriage of marble slab
LABOUR( for finishing, polishing and fixing)
Mason 1st class
Beldar
Coolie
Beldar for rubbing and polishing (Special Rate)
Machine
Sundries and carriage of cement etc.

Details of Cost for : 10.00 Sqm

Unit
Quantity

sqm

Rate

11.50
0.224

1850.00
3485.41

0.05

5000.00

L.S.

26.91

1.49

Day
Day
Day
Day
Day
L.S.

1.20
1.00
1.00
5.00
4.00
134.55

301.00
247.00
247.00
260.00
300.00
1.49
Total:
25901.51

tonne

Add water charges @ 1% on

Add C.P & OH @15% on

26160.53
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 3008.46
Rs 3008.45

Item Code: 11.23.2

Marble stone flooring with 18mm thick marble stone over 20mm thick base of CM 1:4 Raj Nagar Plain.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS:
18mm thick marble slab = 10.00sqm.+
Add for wastage 15%= 1.50sqm.
Total = 11.50sqm.
7071
03.009
0367

DSR-12

White marble Raj Nagar plain 20 mm thick (slab area 0.10 sqm sqm
to 0.20 sqm)
Cement mortar 1:4 (1 cement : 4 coarse sand).
Cum
Cement for slurry

Rate

11.50

545.00

0.224

3485.41

Page 423 of 2298

bedding = 44 kg+ (ii) for jointing = 6 Kg.

Total = 50 Kg.
tonne
9999

0.05

5000.00

L.S.

26.91

1.49

Day
Day
Day
Day
Day

1.20
1.00
1.00
5.00
4.00

301.00
247.00
247.00
260.00
300.00

L.S.

134.55

1.49
Total:
10894.01

Carriage of marble slab

LABOUR :
(for finishing, polishing and fixing)

0123
0114
0115
0139
0013
9999

Mason (brick layer) 1st class

Beldar
Coolie
Skilled Beldar (for floor rubbing etc.)
Machine for rubbing of floors
Sundries and carriage of cement etc.

Add water charges @ 1% on

Add C.P & OH @15% on

11002.95
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1265.34
Rs 1265.35

Item Code: 11.23.3

Marble stone flooring with 18mm thick marble stone over 20mm thick base of CM 1:4 Agaria white.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS18mm thick marble slab = 10.00sqm.+
Add for wastage 15% = 1.50sqm.
Total = 11.50sqm.
7850
Marble Stone Slab 18mm thick ( Agaria White Spot less)
sqm
11.50
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.224
(Rate as per item No. 3.9)
0367
Cement for slurry @4.4 kg/sqm.
(i) for bedding = 44 kg+ (ii) for jointing = 6 Kg.
tonne
0.05
Total = 50 Kg.
9999
Carriage of marble slab
L.S.
26.91
LABOUR(for finishing, polishing and fixing)
0123
Mason 1 st class
Day
1.20
0114
Beldar
Day
1.00
0115
Coolie
Day
1.00
0139
Beldar for rubbing and polishing (Special Rate)
Day
5.00
0013
Machine
Day
4.00
9999
Sundries and carriage of cement etc.
L.S.
134.55
Add water charges @ 1% on

Rate

1090.00
3485.41

5000.00
1.49

301.00
247.00
247.00
260.00
300.00
1.49
Total:
17161.51

Add C.P & OH @15% on

17333.13
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1993.31
Rs 1993.30

Item Code: 11.23.4

Marble stone flooring with 18mm thick marble stone over 20mm thick base of CM 1:4 Black Zebra.

DSR-12

Page 424 of 2298

Code

6019
03.009
0367

9999

0123
0114
0115
0139
0013
9999

Description
MATERIALS18mm thick marble slab = 10.00sqm.+
Add for wastage 15% = 1.50sqm.
Total = 11.50sqm.
Makrana Dhobi Doongri 18mm thick marble slab
Cement mortar 1:4 (1 cement : 4 coarse sand).
(Rate as per item No. 3.9)
Cement for slurry @ 4.4kg/sqm.
(l) for bedding = 44 kg+ (ii) for jointing = 6 Kg.
Total = 50 Kg.
Carriage of marble slab
LABOUR( for finishing, polishing and fixing)
Mason 1 class
Beldar
Coolie
Beldar for rubbing and polishing (Special Rate)
Machine
Sundries and carriage of cement etc.

Details of Cost for : 10.00 Sqm

Unit
Quantity

sqm

Rate

11.50
0.224

470.00
3485.41

0.05

5000.00

L.S.

26.91

1.49

Day
Day
Day
Day
Day
L.S.

1.20
1.00
1.00
5.00
4.00
134.55

301.00
247.00
247.00
260.00
300.00
1.49
Total:
10031.51

tonne

Add water charges @ 1% on

Add C.P & OH @15% on

10131.83
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1165.16
Rs 1165.15

Item Code: 11.23.5

Marble stone flooring with 18mm thick marble stone over 20mm thick base of CM 1:4 Udaipur green marble.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS18mm thick marble slab = 10.00sqm.+
Add for wastage 15% = 1.50sqm.
Total = 11.50sqm.
6010
Udaipur green marble 18 mm thick marble slab
sqm
11.50
660.00
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.224
3485.41
(Rate as per item No. 3.9)
0367
Cement for slurry @ 4.4kg/sqm
. (i ) for bedding = 44 kg+ (ii) for jointing = 6 Kg.
tonne
0.05
5000.00
Total = 50 Kg.
9999
Carriage of marble slab
L.S.
26.91
1.49
LABOUR(for finishing, polishing and fixing)
0123
Mason 1st class
Day
1.20
301.00
0114
Beldar
Day
1.00
247.00
0115
Coolie
Day
1.00
247.00
0139
Beldar for rubbing and polishing (Special Rate)
Day
5.00
260.00
0013
Machine
Day
4.00
300.00
9999
Sundries and carriage of cement etc.
L.S.
134.55
1.49
Total:
Add water charges @ 1% on
12216.51
Add C.P & OH @15% on
12338.68
Cost for 10.00 Sqm

DSR-12

Page 425 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 1418.95
Rs 1418.95

Item Code: 11.23.6

Marble stone flooring with 18mm thick marble stone over 20mm thick base of CM 1:4 Pink Plain Marble.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS18mm thick marble slab = 10.00sqm.+
Add for wastage 15% = 1.50sqm.
Total = 11.50sqm.
6007
Pink plain marble 18mm thick marble slab
sqm
11.50
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.224
(Rate as per item No. 3.9)
0367
Cemen for slurry @4.4Kg/sqm
(i)for bedding = 44 kg+ (ii) for jointing = 6 Kg.
tonne
0.05
Total = 50 Kg.
9999
Carriage of marble slab
L.S.
26.91
LABOUR(for finishing, polishing and fixing)
0123
Mason 1st class
Day
1.20
0114
Beldar
Day
1.00
0115
Coolie
Day
1.00
0139
Beldar for rubbing and polishing (Special Rate)
Day
5.00
0013
Machine
Day
4.00
9999
Sundries and carriage of cement etc.
L.S.
134.55
Add water charges @ 1% on

Rate

610.00
3485.41

5000.00
1.49

301.00
247.00
247.00
260.00
300.00
1.49
Total:
11641.51

Add C.P & OH @15% on

11757.93
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1352.16
Rs 1352.15

Item Code: 11.24

Extra for pre finished nosing to treads of steps of marble stone.
Code
0126
0114
0139
9999

Description
LABOURMason (Ornamental) marble stone
Beldar
Beldar for rubbing and polishing (Special Rate)
Sundries

Details of Cost for : 10.00 m

Unit
Quantity
Day
Day
Day
L.S.

2.00
1.50
2.50
53.82

Add water charges @ 1% on

Rate
301.00
247.00
260.00
1.49
Total:
1702.69

Add C.P & OH @15% on

1719.72
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 197.77
Rs 197.75

Item Code: 11.25

Extra for marble stone floor in treads of steps and risers using single length upto 2 m.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity

DSR-12

Rate

Page 426 of 2298

0123
0114
0115
0139
9999

LABOURMason 1st class

Beldar
Coolie
Beldar for rubbing and polishing (Special Rate)
Sundries

Day
Day
Day
Day
L.S.

1.95
1.40
0.75
3.18
26.91

Add water charges @ 1% on

301.00
247.00
247.00
260.00
1.49
Total:
1984.90

Add C.P & OH @15% on

2004.75
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 230.55
Rs 230.55

Item Code: 11.26.1

Kota stone slab flooring over 20 mm (average) thick with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick.
Details of Cost for : 10.00 Sqm
Unit
Quantity

Code

Description

1168

MATERIALS:
25mm thick Kota stone slabs polished including 15% wastage

2216

Carriage of slabs

03.009
0367

Cement mortar 1:4 (1 cement : 4 coarse sand).

Cement for slurry-(i) for bedding = 44kg+ (ii)
for joints = 20 kg. Total = 64 kg. or 0.06
Carriage of cement
Dark Shade Pigment
LABOUR :
Hire charges of machine for rubbing
Mason II class
Beldar
Coolie
Skilled Beldar (for floor rubbing etc.)
Sundries

2209
0874
0013
0124
0114
0115
0139
9999

Rate

sqm

11.50

270.00

tonne
Cum

0.67
0.224

77.87
3485.41

tonne
tonne
kilog

0.064
0.064
4.50

5000.00
77.87
55.00

4.00
1.20
1.00
1.00
5.00
208.13

300.00
273.00
247.00
247.00
260.00
1.49
Total:
8142.09

Day
Day
Day
Day
Day
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

8223.51
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 945.70
Rs 945.70

Item Code: 11.27

Kotah stone slab 25mm thick in risers steps skirting in CM 1 : 3
Code

Description

1168

MATERIALS:
25mm thick Kota stone slabs polished including 15% wastage

2216
03.008

DSR-12

Details of Cost for : 10.00 Sqm

Unit
Quantity

sqm
Carraige of Stone blocks white & red sand stone & kota stone tonne
slab
Cement mortar 1:3 (1 cement : 3 coarse sand)
Cum

Rate

11.50
0.67

270.00
77.87

0.144

4145.53

Page 427 of 2298

(Rate as per item No. 3.8)

0367

Cement for slurry

2209
0874

Carraige of Cement
Pigment dark shade

0124
0114
0115
0139
9999

LABOURMason (brick layer) 2nd class

Beldar
Coolie
Skilled Beldar (for floor rubbing etc.)
Sundries

tonne
tonne

0.064
0.064

5000.00
77.87

kilog

4.50

55.00

3.00
3.00
1.00
7.00
174.98

273.00
247.00
247.00
260.00
1.49
Total:
8214.33

Day
Day
Day
Day
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

8296.47
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 954.09
Rs 954.10

Item Code: 11.28.1

40mm thick fine dressed stone flooring over 20mm thick base with CM 1:5 Red sand stone.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
Finished work = 10sqm
Add wastage 10% =1.00sqm
Total = 11.00 sqm
1164
Red sand stone slab 40 mmthick (un-dressed)
sqm
11.00
9999
Carriage
L.S.
34.06
03.010
Cement mortar 1:5 (1 cement : 5 coarse sand)
0.25
(Rate as per item No. 3.10)
(i) for bedding = 0224 cum (ii) for joining = 0.026 cum.
Total=0.250cum.
LABOUR0123
Mason 1 st class
Day
3.10
0100
Bandhani
Day
1.10
0115
Coolie
Day
0.55
0101
Bhisti
Day
0.27
9999
Sundries
L.S.
10.79
Add water charges @ 1% on

Rate

155.00
1.49
3129.96

301.00
260.00
247.00
260.00
1.49
Total:
3979.47

Add C.P & OH @15% on

4019.26
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 462.22
Rs 462.20

Item Code: 11.28.2

40mm thick fine dressed stone flooring over 20mm thick base with CM 1:5 White sand stone.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
White sand stone
Finished work =10 sqm

DSR-12

Rate

Page 428 of 2298

1165
9999
03.010

0123
0100
0115
0101
9999

Add wastage 10% =1.00sqm

Total = 11.00 sqm
White sand stone slab 40 mm thick (un-dressed)
Carriage
Cement mortar 1:5 (1 cement : 5 coarse sand)
(Rate as per item No. 3.10)
(i) for bedding ).224cum+ (ii) for joining = 0.026 cum.
Total=0.250cum.
LABOURMason 1st class
Bandhani
Coolie
Bhisti
Sundries

sqm
L.S.

11.00
34.06
0.25

170.00
1.49
3129.96

Day
Day
Day
Day
L.S.

3.10
1.10
0.55
0.27
10.79

301.00
260.00
247.00
260.00
1.49
Total:
4144.47

Add water charges @ 1% on

Add C.P & OH @15% on

4185.91
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 481.38
Rs 481.40

Item Code: 11.29.1

40mm thick fine dressed stone flooring over 20mm thick base of cement mortar 1:5 i/c pointing with CM 1:2 Red sand stone.

Code

1164
9999
03.010

03.012

0123
0100
0115
0101
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS
Finished work 10 sqm
Add wastage 10% =1.00sqm
Total = 11.00 sqm
Red sand stone slab 40 mm thick (un-dressed)
Carriage
Cement mortar 1:5 (1 cement : 5 coarse sand)
Rate as per item No.3.10
(i) for bedding = 0.224 cum+(ii) for joining = 0.026 cum.
Total=0.250cum.
Cement Mortar 1:2 (1 cement : 2 stone dust)
for pointing Rate as per item No.3.12
LABOURMason 1st class
Bandhani
Coolie
Bhisti
Sundries

sqm
L.S.

Day
Day
Day
Day
L.S.

Rate

11.00
34.06
0.25

155.00
1.49
3129.96

0.023

4678.61

3.90
1.10
1.40
0.55
26.91

301.00
260.00
247.00
260.00
1.49
Total:
4634.65

Add water charges @ 1% on

Add C.P & OH @15% on

4681.00
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 538.32
Rs 538.30

Item Code: 11.29.2

40mm thick fine dressed stone flooring over 20mm thick base of cement mortar 1:5 i/c pointing with CM 1:2 White sand stone.

DSR-12

Page 429 of 2298

Code

1165
9999
03.010

03.012
0123
0100
0115
0101
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS
Finished work = 10sqm
Add wastage 10% =1.00sqm
Total = 11.00 sqm
White sand stone slab 40 mm thick (un-dressed)
Carriage
Cement mortar 1:5 (1 cement : 5 coarse sand)
Rate as per item No.3.10
(i) for bedding = 0.224 cum+ (ii) for joining = 0.026 cum.
Total=0.250cum.
Cement Mortar 1:2 (1 cement : 2 stone dust)
LABOURMason 1st class
Bandhani
Coolie
Bhisti
Sundries

sqm
L.S.

Day
Day
Day
Day
L.S.

Rate

11.00
34.06
0.25

170.00
1.49
3129.96

0.023

4678.61

3.90
1.10
1.40
0.55
26.91

301.00
260.00
247.00
260.00
1.49
Total:
4799.65

Add water charges @ 1% on

Add C.P & OH @15% on

4847.65
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 557.48
Rs 557.50

Item Code: 11.30.1

40mm thick fine dressed and rubbed stone flooring over 20 mm thick base of CM 1:5 with joints 3mm thick, side buttered with CM
1:2 Red sand stone.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
Finished work 10 sqm
Add wastage 10% = 1.00 sqm
Total = 11.00 sqm
1164
Red sand stone slab 40 mmthick (un-dressed)
sqm
11.00
155.00
9999
Carriage
L.S.
34.06
1.49
03.010
Cement mortar 1:5 (1 cement : 5 coarse sand)
0.25
3129.96
Rate as per item No.3.10
(i) for bedding = 0.224 cum+ (ii) for joining = 0.026 cum.
Total=0.250cum.
03.012
Cement Mortar 1:2 (1 cement : 2 stone dust)
0.023
4678.61
for pointing Rate as per item No.3.12
LABOUR0123
Mason 1st class
Day
3.90
301.00
0100
Bandhani
Day
1.10
260.00
0115
Coolie
Day
1.40
247.00
0101
Bhisti
Day
0.55
260.00
9999
Sundries
L.S.
26.91
1.49
Labour for rubbing of stone
0139
Beldar for rubbing (special rate)
Day
0.618
260.00
0013
Machine
Day
0.988
300.00
Total:
Add water charges @ 1% on
5091.73
Add C.P & OH @15% on
5142.65
Cost for 10.00 Sqm

DSR-12

Page 430 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 591.41
Rs 591.40

Item Code: 11.30.2

40mm thick fine dressed and rubbed stone flooring over 20 mm thick base of CM 1:5 with joints 3mm thick, side buttered with CM
1:2 White sand stone.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
Finished work 10 sqm
Add wastage 10%= 1.00 sqm
Total = 11.00 sqm
1165
White sand stone slab 40 mm thick (un-dressed)
sqm
11.00
170.00
9999
Carriage
L.S.
34.06
1.49
03.010
Cement mortar 1:5 (1 cement : 5 coarse sand)
0.25
3129.96
Rate as per item No. 3.10
(i) for bedding = 0.224 cum+ (ii) for joining = 0.026 cum.
Total=0.250cum.
03.012
Cement Mortar 1:2 (1 cement : 2 stone dust)
0.023
4678.61
for pointing Rate as per item No. 3.12
LABOUR0123
Mason 1 st class
Day
3.90
301.00
0100
Bandhani
Day
1.10
260.00
0115
Coolie
Day
1.40
247.00
0101
Bhisti
Day
0.55
260.00
9999
Sundries
L.S.
26.91
1.49
Labour for rubbing of stone
0139
Beldar for rubbing (special rate)
Day
0.618
260.00
0013
Machine
Day
0.988
300.00
Total:
Add water charges @ 1% on
5256.73
Add C.P & OH @15% on
5309.30
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 610.57
Rs 610.55

Item Code: 11.31

Extra for pre finished nosing in treads of steps of kota stone/ sand stone slab.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
LABOUR0126
Stone mason (ornamental)
Day
1.50
Add water charges @ 1% on

Rate
301.00
Total:
451.50

Add C.P & OH @15% on

456.02
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 52.44
Rs 52.45

Item Code: 11.32

Extra for kota/sand stone flooring in treads of steps using single length upto 1.05m
Details of Cost for : 10.00 Sqm

DSR-12

Page 431 of 2298

Code
0124
0114

Description
LABOURMason 2nd class
Beldar

Unit

Quantity

Rate

Day
Day

0.20
0.20

273.00
247.00
Total:
104.00

Add water charges @ 1% on

Add C.P & OH @15% on

105.04
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 12.08
Rs 12.10

Item Code: 11.33.1

25mm wooden planking, tongued and grooved in flooring Second class teak wood.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 2.5x4=10 sqm.
Materials-Second class indian teak wood
No of joints = 4000/138 = 28.97 = (29-l) = 28nos
Qty of wood required
2.5(4+0.336)x0.025 = 0.271 cum
Add wastage @ 10 % = 0.027 cum
= 0.2981 cum = 298.1 cudm
1190
Second class indian teak wood
cum
0.2981
72000.00
1231
Extra for selected planks
cum
0.2981
11500.00
2204
Carriage of timber
cum
0.2981
100.11
0682
Iron screws 50 mm (slotted counters sunk head type)
100 N
200.00
70.00
LABOUR0111
Carpenter 1st class
Day
2.68
301.00
0114
Beldar
Day
1.35
247.00
9999
Sundries for glue etc.
L.S.
33.28
1.49
Total:
Add water charges @ 1% on
26250.91
Add C.P & OH @15% on
26513.42
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 3049.04
Rs 3049.05

Item Code: 11.33.2

25mm wooden planking, tongued and grooved in flooring Second class deodar wood.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 2.5x4=10 sqm.
MATERIALSFirst class deodar wood planks
No of joints = 4000/138 = 28.97
= (29-l) = 28nos
Qty of wood required
2.5(4+0.336)x0.025 = 0.271 cum
Add wastage @ 10 % = 0.027 cum
= 0.2981 cum = 298.10 cudm 1194
First class deodar wood planks
cum
0.2981
48000.00
2500
Extra for selected planks
cum
0.2981
7300.00
2204
Carriage of timber
cum
0.2981
100.11
0682
Iron screws 50 mm (slotted counters sunk head type)
100 N
200.00
70.00

DSR-12

Page 432 of 2298

0111
0114
9999

LABOURCarpenter 1 st class
Beldar
Sundries for glue etc.

Day
Day
L.S.

2.16
1.08
26.91

Add water charges @ 1% on

301.00
247.00
1.49
Total:
17611.79

Add C.P & OH @15% on

17787.91
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2045.61
Rs 2045.60

Item Code: 11.34

38mm wood block flooring of Ist teakwood
Code

0313
2211

1187
2204
0111
0114
0115
0130
9999

Description
Bitumen blown type
i) For bed layer @ 2.45kg/sqm. = 2.45kg+
ii) For dipping blocks L.S. = 2.00Kg.
= 4.45kg.
Bitumen blown type
Carriage of bitumen
1st class teak wood in scantling for wooden blocks
1 sqm x 0.038 m = 0.038 cum
Add 10 % wastage = 0.0038 cum
Total = 0.0418 cum or 41.80 cudm
1st class teak wood in scanting for wooden
blocks
Carriage of timber
LABOURCarpenter 1st class
Beldar
Coolie
Mistry
Sundries such as fuel, kerosene oil, sand paper

Details of Cost for : 1.00 Sqm

Unit
Quantity

Rate

tonne
tonne

0.0044
0.0044

37000.00
87.60

cum

0.0418

70000.00

cum

0.0418

100.11

Day
Day
Day
Day
L.S.

1.75
2.25
1.50
0.10
80.73

301.00
247.00
247.00
301.00
1.49
Total:
4696.76

Add water charges @ 1% on

Add C.P & OH @15% on

4743.73
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 5455.29
Rs 5455.30

Item Code: 11.35

P/F MS 40x40x5mm as nosing in steps of s/c
Code

1007

DSR-12

Description
Details of cost for 3m (11.40+0.24kg= 11.64kg)
Materialsangle iron 50x50x5 mm +3m
Add wastage @ 5% +0.15m
Total = 3.15m @ 3.80kg per m = 11.97 kg
Say 0.120 qutl
Angle iron
Lugs 10x5 mm flat [email protected]
kg per m = 0.24 kg

Details of Cost for : 11.64 Kg

Unit
Quantity

quint

0.12

Rate

4250.00

Page 433 of 2298

1008
2205
1215
9999
0103
0123
0114
13.050.03

Add wastage @ 5% = 0.012 kg

M.S. flats (Total 0.252 kg or 0.0025 qtl)
Carriage of steel
Welding charges 6cm (lugs) by electrical
plant
Sundries
LabourBlacksmith 2nd class
Mason 1st class
Beldar
(A) Priming coat 1x3x0.2=0.60 sqm
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise

quint
tonne
cm

0.0025
0.0122
6.00

4200.00
77.87
1.50

L.S.

9.10

1.49

Day
Day
Day

0.09
0.45
0.25

273.00
301.00
247.00

0.60

20.72

Add water charges @ 1% except on [A] i.e on

Total:
765.78

Add C.P & OH @15% except on [A] i.e on

773.44
Cost for 11.64 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 77.48
Rs 77.50

Item Code: 11.36

P/F Ist quality ceramic glazed wall tiles in all colours, shades except burgundy, bottle green, black in skirting, risers of steps and
dado ...
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSCeramic Glazed tiles = 1.00 sqm
Add for wastage & breakage @ 2.5 % = 0.025 sqm = 1.025
sqm
7800
Tiles
sqm
1.025
295.00
9999
Carriage of tiles
L.S.
6.24
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.014
4145.53
9999
Mortar for pointing in white cement
L.S.
40.43
1.49
0367
Cement for slurry over bed @ 3.3 kg per sqm
tonne
0.0033
5000.00
LABOUR:
0123
Mason 1 st class
Day
0.25
301.00
0115
Coolie
Day
0.25
247.00
9999
Sundries including carriage of cement etc
L.S.
26.91
1.49
Total:
Add water charges @ 1% on
623.56
Add C.P & OH @15% on
629.80
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 724.27
Rs 724.25

Item Code: 11.37

P/LCeramic glazed floor tiles 300x300 mm of 1st quality in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm
thick C M 1:4 etc., complete.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSGlazed Ceramic floor tiles 300x300 mm size = 1.00 sqm
Add for wastage & breakage @ 2.5 % = 0.025sqm
= Total 1.025 sqm

DSR-12

Page 434 of 2298

7801
9999
03.009
9999
0367
0123
0115
9999

Tiles
Carriage of tiles
Cement mortar 1:4 (1 cement : 4 coarse sand).
Mortar for pointing in white cement
Cement for slurry over bed @ 3.3 kg per sqm
LABOUR:
Mason 1st class
Coolie
Sundries including carriage of cement etc

sqm
L.S.
L.S.
tonne
Day
Day
L.S.

1.025
6.24
0.024
20.20
0.0033

360.00
1.49
3485.41
1.49
5000.00

0.20
0.20
26.91

301.00
247.00
1.49
Total:
658.25

Add water charges @ 1% on

Add C.P & OH @15% on

664.83
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 764.55
Rs 764.55

Item Code: 11.38

P/L ceramic glazed floor tiles 300x300mm of Ist quality in all colours, except white, Ivory, Grey, Fume Red brown laid on 20 mm
thick CM 1:4
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSGlazed Ceramic floor tiles 300x300 mm size = 1.00 sqm
Add for wastage & breakage @ 2.5 % = 0.025 sqm = Total
1.025 sqm
7802
Tiles
sqm
1.025
367.00
9999
Carriage of tiles
L.S.
6.24
1.49
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.024
3485.41
9999
Mortar for pointing in white cement
L.S.
20.20
1.49
0367
Cement for slurry over bed @ 3.3 kg per sqm
tonne
0.0033
5000.00
LABOUR:
0123
Mason 1 st class
Day
0.20
301.00
0115
Coolie
Day
0.20
247.00
9999
Sundries including carriage of cement etc
L.S.
26.91
1.49
Total:
Add water charges @ 1% on
665.43
Add C.P & OH @15% on
672.08
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 772.89
Rs 772.90

Item Code: 11.39

P/Lrectified Glazed Ceramic floor tiles 300x300 mm or more of 1st quality in colours White, Ivory, Grey, Fume Red Brown, laid on
20mm thick CM 1:4 etc., complete.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSRectified glazed Ceramic floor tiles 300x300mm or more =
1.000 sqm
Add for wastage & breakage @ 2.5 % = 0.025 sqm
7803
Total = 1.025 sqm
sqm
1.025
510.00
9999
Carriage of tiles
L.S.
6.24
1.49
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.024
3485.41
9999
Mortar for pointing in white cement
L.S.
13.47
1.49

DSR-12

Page 435 of 2298

0367
0123
0115
9999

Cement for slurry over bed @ 3.3 kg per sqm

LABOUR:
Mason 1st class
Coolie
Sundries including carriage of cement etc

tonne
Day
Day
L.S.

0.0033

5000.00

0.20
0.20
26.91

301.00
247.00
1.49
Total:
801.97

Add water charges @ 1% on

Add C.P & OH @15% on

809.99
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 931.49
Rs 931.50

Item Code: 11.40

P/L rectified Glazed Ceramic floor tiles 300x300 mm or more of 1st quality in colours except White, Ivory, Grey, Fume Red Brown,
laid on 20mm thick CM 1:4 etc., complete.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
LABOUR:
7804
Rectified Ceramic Glazed Tiles Ist quality 300 x 300mm or
more =1.000 sqm
add wastage &
sqm
1.025
535.00
9999
Carriage of tiles
L.S.
6.24
1.49
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
Cum
0.024
3485.41
9999
Mortar for pointing in white cement
L.S.
13.47
1.49
0367
Cement for slurry over bed @ 3.3 kg per sqm
tonne
0.0033
5000.00
LABOUR:
0123
Mason (brick layer) 1st class
Day
0.20
301.00
0115
Coolie
Day
0.20
247.00
9999
Sundries including carriage of cement etc.,
L.S.
26.91
1.49
Total:
Add water charges @ 1% on
827.60
Add C.P & OH @15% on
835.88
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 961.26
Rs 961.25

Item Code: 11.41.1

P/L vitrified floor tiles of in all colours and shades, laid on 20mm thick CM 1:4 - grouting the joints with white cement - Size of Tile
50x50 cm
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSPorcelain floor tiles 50x50 cm size = 1.000 sqm
Add for wastage & breakage @ 2.5 % = 0.025 sqm
8620
Total = 1.025 sqm
sqm
1.025
735.00
9999
Carriage of tiles
L.S.
6.24
1.49
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.024
3485.41
9999
Mortar for pointing in white cement
L.S.
3.64
1.49
0367
Cement for slurry over bed @ 3.3 kg per sqm
tonne
0.0033
5000.00
LABOUR:
0123
Mason 1st class
Day
0.20
301.00
0115
Coolie
Day
0.20
247.00
9999
Sundries including carriage of cement etc
L.S.
26.91
1.49
Total:

DSR-12

Page 436 of 2298

Add water charges @ 1% on

1017.95

Add C.P & OH @15% on

1028.13
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1182.35
Rs 1182.35

Item Code: 11.41.2

P/L vitrified floor tiles laid on 20mm thick CM 1:4 including grouting the joints with white cement complete. Size of Tile 60x60 cm

Code

8621
9999
03.009
9999
0367
0123
0115
9999

Description
MATERIALSPorcelain floor tiles 60x60 cm size = 1.000 sqm
Add for wastage & breakage @ 2.5 % = 0.025 sqm
Total = 1.025 sqm
Carriage of tiles
Cement mortar 1:4 (1 cement : 4 coarse sand).
(Rate as per item no. 3.90)
Mortar for pointing in white cement
Cement for slurry over bed @ 3.3 kg per sqm
LABOUR:
Mason I class
Coolie
Sundries including carriage of cement etc

Details of Cost for : 1.00 Sqm

Unit
Quantity

sqm
L.S.

L.S.
tonne
Day
Day
L.S.

Rate

1.025
6.24
0.024

865.00
1.49
3485.41

3.64
0.0033

1.49
5000.00

0.20
0.20
26.91

301.00
247.00
1.49
Total:
1151.20

Add water charges @ 1% on

Add C.P & OH @15% on

1162.71
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1337.12
Rs 1337.10

Item Code: 11.41.3

P/L vitrified floor tiles approved make in all colours and shades, laid on 20mm thick CM 1:4 etc., complete. Size of Tile 80x80 cm

Code

8622
9999
03.009
9999
0367
0123
0115
9999

Description
MATERIALSPorcelain floor tiles 80x80 cm size = 1.000 sqm
Add for wastage & breakage @ 2.5 % = 0.025 sqm
Total = 1.025 sqm
Carriage of tiles
Cement mortar 1:4 (1 cement : 4 coarse sand).
Mortar for pointing in white cement
Cement for slurry over bed @ 3.3 kg per sqm
LABOUR:
Mason 1st class
Coolie
Sundries including carriage of cement etc

Details of Cost for : 1.00 Sqm

Unit
Quantity

sqm
L.S.
L.S.
tonne
Day
Day
L.S.

Rate

1.025
6.24
0.024
2.60
0.0033

1070.00
1.49
3485.41
1.49
5000.00

0.20
0.20
26.91

301.00
247.00
1.49
Total:
1359.77

Add water charges @ 1% on

Add C.P & OH @15% on

1373.37
Cost for 1.00 Sqm

DSR-12

Page 437 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 1579.38
Rs 1579.40

Item Code: 11.41.4

P/L vitrified floor tiles in different sizes of approved make in all colours and shades, laid on 20mm thick CM 1:4 etc., complete. Size
of Tile 100x100 cm
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALSVitrified floor tiles 100x100 cm size = 1.000 sqm
Add for wastage & breakage @ 2.5 % = 0.025 sqm
8623
Total = 1.025 sqm
sqm
1.025
1630.00
9999
Carriage of tiles
L.S.
6.24
1.49
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.024
3485.41
9999
Mortar for pointing in white cement
L.S.
2.60
1.49
0367
Cement for slurry over bed @ 3.3 kg per sqm
tonne
0.0033
5000.00
LABOUR:
0123
Mason 1st class
Day
0.20
301.00
0115
Coolie
Day
0.20
247.00
9999
Sundries including carriage of cement etc
L.S.
26.91
1.49
Total:
Add water charges @ 1% on
1933.77
Add C.P & OH @15% on
1953.11
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2246.08
Rs 2246.10

Item Code: 11.42

Deduct for not using 20mm thick cment mortar 1:4(1cement : 4 coarse sand )bedding in laying of floor tiles.
Details of Cost for : -1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
Cum
0.024
3485.41
9999
Mortar for pointing in white cement
L.S.
40.43
1.49
0367
Cement
tonne
0.0033
5000.00
LABOUR:
0123
Mason I class
Day
0.20
301.00
0115
Coolie
Day
0.20
247.00
9999
Sundries
L.S.
26.91
1.49
Total:
Add water charges @ 1% on
310.09
Add C.P & OH @15% on
313.19
Cost for -1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

-Rs 360.17
-Rs 360.15

Item Code: 11.43

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) . ... ..

Code
8731

DSR-12

Description
MATERIALS:
High polymer modified quickset tile adhesive.

Details of Cost for : 1.00 Sqm

Unit
Quantity
per k

5.00

Rate
16.00

Page 438 of 2298

9999

Mortar for pointing in white cement

0123
0115
9999

LABOUR:
Mason I class
Coolie
Sundries

L.S.

40.43

1.49

Day
Day
L.S.

0.20
0.20
26.91

301.00
247.00
1.49
Total:
289.94

Add water charges @ 1% on

Add C.P & OH @15% on

292.84
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 336.77
Rs 336.75

Item Code: 11.44

Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5
mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre..

Code

03.009
0124
0114
0101
9999
0367
2209
0114

2709
9999

03.009
04.018
04.012

0123
0114
0115
0101
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS:
Under layer 12mm thick Cement mortar 1:4
Cement mortar 1:4 (1 cement : 4 coarse sand).
Mason (brick layer) 2nd class
Beldar
Bhisti
Scaffolding
Cement slurry for sub-grade
Portland Cement
Carraige of Cement
Labour for applying cement slurry
Beldar
Top layer with tile piece and gap filling with cement mortar:
Ceramic tile piece for crazy flooring assuming 70% tile area
and 30% of joint filler /mixture
7 x 0.01 = 0.07
0.872 x 0.07 / 0.051=1.20 Qtl
Ceremic Tiles Pieces for Crazy Flooring
Carriage of materials
Cement mortar 1:4 for filling of crazy tile:
(300 x 0.01=0.03)
Cement mortar 1:4 (1 cement : 4 coarse sand).
Extra for addition of synthetic polyester triangular fibre in
cement concrete/ RCC/ Floori
Extra for mixing water proofing material in CC work @ 1 kg
per 50kg of cement.
LABOUR:
Mason (brick layer) 1st class
Beldar
Coolie
Bhisti
Sundries

Rate

Cum
Day
Day
Day
L.S.

0.14
0.67
0.75
0.92
8.97

3485.41
273.00
247.00
260.00
1.49

tonne
tonne

0.04
0.04

5000.00
77.87

Day

0.50

247.00

Qtl
L.S.

1.20
62.40

130.00
1.49

Cum
units

0.03
1.38

3485.41
53.00

units

1.38

35.33

Day
Day
Day
Day
L.S.

1.20
1.00
1.00
0.54
67.25

301.00
247.00
247.00
260.00
1.49
Total:
2884.64

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

2913.49
Cost for 10.00 Sqm

DSR-12

Page 439 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 347.24
Rs 347.25

Item Code: 11.45

Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD)
Code
0295

0114
0115
0101
02.027
2708
0123
0114
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS:
Stone Aggregate (Single size) : 20 mm nominal size
LABOUR:
For spreading ramming and consolidation of sub-grade
Beldar
Coolie
Bhisti
Providing and filling Jamuna / Sand for filling
S/F in plinth with river sand under floors .. ..
Truf Paver (500 x 500 x 40 mm)
Labour for turf pave
Mason (brick layer) 1st class
Beldar
Sundries

Rate

cum

1.50

1050.00

Day
Day
Day

0.70
0.52
0.36

247.00
247.00
260.00

Cum
Sqm

1.50
10.00

749.30
1080.65

Day
Day
L.S.

0.50
1.00
50.00

301.00
247.00
1.49
Total:
13248.44

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

13380.92
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1651.20
Rs 1651.20

Item Code: 11.46.1

P/L Vitrified tiles in different sizes in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 - Size
of Tile 500x500 mm
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
8620
Vitrified floor tiles 50x50 cm
Sqm
1.025
735.00
(Qty including 2.5% for wastage and breakage)
9999
Carriage
L.S.
6.24
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
Cum
0.014
4145.53
9999
Mortart for pointing in white cement
L.S.
3.64
1.49
Cement slurry over bed @ 3.3 kg/ sqm
0367
Portland Cement
tonne
0.0033
5000.00
LABOUR:
0123
Mason (brick layer) 1st class
Day
0.25
301.00
0115
Coolie
Day
0.25
247.00
9999
Sundries including carriage of quick set polymer etc.,
L.S.
26.91
1.49
Total:
Add water charges @ 1% on
1019.74
Add C.P & OH @15% on
1029.94
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 1184.43
Rs 1184.40

Page 440 of 2298

Item Code: 11.46.2

P/L Vitrified tiles in different sizes in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 - Size
of Tile 600x600 mm
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
8621
Vitrified floor tile 60x60 cm
sqm
1.025
865.00
(Qty including 2.5% for wastage and breakage)
9999
Carriage
L.S.
6.24
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
Cum
0.014
4145.53
9999
Mortart for pointing in white cement
L.S.
3.64
1.49
Cement slurry over bed @ 3.3 kg/ sqm
0367
Portland Cement
tonne
0.0033
5000.00
LABOUR:
0123
Mason (brick layer) 1st class
Day
0.25
301.00
0115
Coolie
Day
0.25
247.00
9999
Sundries including carriage of quick set polymer etc.,
L.S.
26.91
1.49
Total:
Add water charges @ 1% on
1152.99
Add C.P & OH @15% on
1164.52
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1339.20
Rs 1339.20

Item Code: 11.46.3

P/L Vitrified tiles in different sizes in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 - Size
of Tile 800x800 mm
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
8622
Vitrified floor tile 80x80 cm
sqm
1.025
1070.00
(Qty including 2.5% for wastage and breakage)
9999
Carriage
L.S.
6.24
1.49
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
Cum
0.014
4145.53
9999
Mortart for pointing in white cement
L.S.
3.64
1.49
Cement slurry over bed @ 3.3 kg/ sqm
0367
Portland Cement
tonne
0.0033
5000.00
LABOUR:
0123
Mason (brick layer) 1st class
Day
0.25
301.00
0115
Coolie
Day
0.25
247.00
9999
Sundries including carriage of quick set polymer etc.,
L.S.
26.91
1.49
Total:
Add water charges @ 1% on
1363.11
Add C.P & OH @15% on
1376.74
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1583.25
Rs 1583.25

Item Code: 11.46.4

P/L Vitrified tiles in different sizes in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 - Size
of Tile 1000x1000 mm

DSR-12

Page 441 of 2298

Code
8623
9999
03.008
9999

0367
0123
0115
9999

Description
MATERIALS:
Vitrified floor tile 100x100 cm
(Qty including 2.5% for wastage and breakage)
Carriage
Cement mortar 1:3 (1 cement : 3 coarse sand)
Mortart for pointing in white cement
Cement slurry over bed @ 3.3 kg/ sqm
Portland Cement
LABOUR:
Mason (brick layer) 1st class
Coolie
Sundries including carriage of quick set polymer etc.,

Details of Cost for : 1.00 Sqm

Unit
Quantity

Rate

sqm

1.025

1630.00

L.S.
Cum

6.24
0.014

1.49
4145.53

L.S.

3.64

1.49

0.0033

5000.00

0.25
0.25
26.91

301.00
247.00
1.49
Total:
1937.11

tonne
Day
Day
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

1956.48
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2249.95
Rs 2249.95

Item Code: 11.47.1

Providing and laying Vitrified tiles in different sizes in all_x000D_
colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water
based)..Size of Tile 500x500 mm
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
8620
Vitrified floor tile 50x50 cm
sqm
1.025
735.00
(Qty including 2.5% for wastage and breakage)
9999
Carriage of tiles
L.S.
6.24
1.49
8731
High polymer modified quickset tile adhesive
per k
10.00
16.00
LABOUR:
0123
Mason (brick layer) 1st class
Day
0.25
301.00
0115
Coolie
Day
0.50
247.00
9999
Sundries including carriage of quickset polymer etc.,
L.S.
26.91
1.49
Total:
Add water charges @ 1% on
1161.53
Add C.P & OH @15% on
1173.15
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1349.12
Rs 1349.10

Item Code: 11.47.2

Providing and laying Vitrified tiles in different sizes in all colours and shade, in skirting, riser of steps, laid with cement based high
polymer modified quick set tile adhesive (water based)..Size of Tile 600x600 mm

Code
8621
9999

DSR-12

Description
MATERIALS:
Vitrified floor tile 60x60 cm
(Qty including 2.5% for wastage and breakage)
Carriage of tiles

Details of Cost for : 1.00 Sqm

Unit
Quantity

Rate

sqm

1.025

865.00

L.S.

6.24

1.49

Page 442 of 2298

8731
0123
0115
9999

High polymer modified quickset tile adhesive

LABOUR:
Mason (brick layer) 1st class
Coolie
Sundries including carriage of quickset polymer etc.,

per k

10.00

16.00

Day
Day
L.S.

0.25
0.50
26.91

301.00
247.00
1.49
Total:
1294.78

Add water charges @ 1% on

Add C.P & OH @15% on

1307.73
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1503.89
Rs 1503.85

Item Code: 11.47.3

Providing and laying Vitrified tiles in different sizes in all colours and shade, in skirting, riser of steps, laid with cement based high
polymer modified quick set tile adhesive (water based)..Size of Tile 800x800 mm

Code
8622
9999
8731
0123
0115
9999

Description
MATERIALS:
Vitrified floor tile 80x80 cm
(Qty including 2.5% for wastage and breakage)
Carriage of tiles
High polymer modified quickset tile adhesive
LABOUR:
Mason (brick layer) 1st class
Coolie
Sundries including carriage of quickset polymer etc.,

Details of Cost for : 1.00 Sqm

Unit
Quantity

Rate

sqm

1.025

1070.00

L.S.
per k

6.24
10.00

1.49
16.00

Day
Day
L.S.

0.25
0.50
26.91

301.00
247.00
1.49
Total:
1504.90

Add water charges @ 1% on

Add C.P & OH @15% on

1519.95
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1747.94
Rs 1747.95

Item Code: 11.47.4

Providing and laying Vitrified tiles in different sizes in all colours and shade, in skirting, riser of steps, laid with cement based high
polymer modified quick set tile adhesive (water based)..Size of Tile 1000x1000 mm

Code
8623
9999
8731
0123
0115
9999

Description
MATERIALS:
Vitrified floor tile 100x100 cm
(Qty including 2.5% for wastage and breakage)
Carriage of tiles
High polymer modified quickset tile adhesive
LABOUR:
Mason (brick layer) 1st class
Coolie
Sundries including carriage of quickset polymer etc.,

Details of Cost for : 1.00 Sqm

Unit
Quantity

Rate

sqm

1.025

1630.00

L.S.
per k

6.24
10.00

1.49
16.00

Day
Day
L.S.

0.25
0.50
26.91

301.00
247.00
1.49
Total:
2078.90

Add water charges @ 1% on

Add C.P & OH @15% on

2099.69
Cost for 1.00 Sqm

DSR-12

Page 443 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 2414.64
Rs 2414.65

Item Code: 11.48.1

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired
shade .. Size of Tile 500x500 mm
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
8682
Epoxy Grout
Kg
0.21
500.00
LABOUR:
0123
Mason (brick layer) 1st class
Day
0.10
301.00
0115
Coolie
Day
0.10
247.00
9999
Sundries including carriage
L.S.
5.00
1.49
Total:
Add water charges @ 1% on
167.25
Add C.P & OH @15% on
168.92
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 194.26
Rs 194.25

Item Code: 11.48.2

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired
shade .. Size of Tile 600x600 mm
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
8682
Epoxy Grout
Kg
0.18
500.00
LABOUR:
0123
Mason (brick layer) 1st class
Day
0.08
301.00
0115
Coolie
Day
0.08
247.00
9999
Sundries including carriage
L.S.
5.00
1.49
Total:
Add water charges @ 1% on
141.29
Add C.P & OH @15% on
142.70
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 164.11
Rs 164.10

Item Code: 11.48.3

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired
shade .. Size of Tile 800x800 mm
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
8682
Epoxy Grout
Kg
0.15
500.00
LABOUR:
0123
Mason (brick layer) 1st class
Day
0.06
301.00
0115
Coolie
Day
0.06
247.00
9999
Sundries including carriage
L.S.
5.00
1.49
Total:
Add water charges @ 1% on
115.33

DSR-12

Page 444 of 2298

Add C.P & OH @15% on

116.48
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 133.95
Rs 133.95

Item Code: 11.48.4

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired
shade .. Size of Tile 1000x1000 mm
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
8682
Epoxy Grout
Kg
0.11
500.00
LABOUR:
0123
Mason (brick layer) 1st class
Day
0.04
301.00
0115
Coolie
Day
0.04
247.00
9999
Sundries including carriage
L.S.
5.00
1.49
Total:
Add water charges @ 1% on
84.37
Add C.P & OH @15% on
85.21
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 97.99
Rs 98.00

Item Code: 11.49.1

Providing and laying Vitrified tiles in floor with different sizes laid with cement based high polymer modified_x000D_
quick set tile adhesive (water based) - 6 mm thickness - Size of Tile 500x500 mm

Code
8620
9999
8731
0123
0115
9999

Description
MATERIALS:
Vitrified floor tile 50x50 cm
(Qty including 2.5% for wastage and breakage)
Carriage of tiles
High polymer modified quickset tile adhesive
LABOUR:
Mason (brick layer) 1st class
Coolie
Sundries including carriage of quick set polymer etc.,

Details of Cost for : 1.00 Sqm

Unit
Quantity

Rate

sqm

1.025

735.00

L.S.
per k

6.24
10.00

1.49
16.00

Day
Day
L.S.

0.20
0.40
26.91

301.00
247.00
1.49
Total:
1121.78

Add water charges @ 1% on

Add C.P & OH @15% on

1133.00
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1302.95
Rs 1302.95

Item Code: 11.49.2

Providing and laying Vitrified tiles in floor with different sizes laid with cement based high polymer modified quick set tile adhesive
(water based) - 6 mm thickness - Size of Tile 600x600 mm

Code

DSR-12

Description

Details of Cost for : 1.00 Sqm

Unit
Quantity

Rate

Page 445 of 2298

8621
9999
8731
0123
0115
9999

MATERIALS:
Vitrified floor tile 60x60 cm
(Qty including 2.5% for wastage and breakage)
Carriage of tiles
High polymer modified quickset tile adhesive
LABOUR:
Mason (brick layer) 1st class
Coolie
Sundries including carriage of quick set polymer etc.,

sqm

1.025

865.00

L.S.
per k

6.24
10.00

1.49
16.00

Day
Day
L.S.

0.20
0.40
26.91

301.00
247.00
1.49
Total:
1255.03

Add water charges @ 1% on

Add C.P & OH @15% on

1267.58
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1457.72
Rs 1447.70

Item Code: 11.49.3

Providing and laying Vitrified tiles in floor with different sizes laid with cement based high polymer modified quick set tile adhesive
(water based) - 6 mm thickness - Size of Tile 800x800 mm

Code
8622
9999
8731
0123
0115
9999

Description
MATERIALS:
Vitrified floor tile 80x80 cm
(Qty including 2.5% for wastage and breakage)
Carriage of tiles
High polymer modified quickset tile adhesive
LABOUR:
Mason (brick layer) 1st class
Coolie
Sundries including carriage of quick set polymer etc.,

Details of Cost for : 1.00 Sqm

Unit
Quantity

Rate

sqm

1.025

1070.00

L.S.
per k

6.24
10.00

1.49
16.00

Day
Day
L.S.

0.20
0.40
26.91

301.00
247.00
1.49
Total:
1465.15

Add water charges @ 1% on

Add C.P & OH @15% on

1479.80
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1701.77
Rs 1701.75

Item Code: 11.49.4

Providing and laying Vitrified tiles in floor with different sizes laid with cement based high polymer modified quick set tile adhesive
(water based) - 6 mm thickness - Size of Tile 1000x1000 mm

Code
8623
9999
8731
0123
0115
9999

DSR-12

Description
MATERIALS:
Vitrified floor tile 100x100 cm
(Qty including 2.5% for wastage and breakage)
Carriage of tiles
High polymer modified quickset tile adhesive
LABOUR:
Mason (brick layer) 1st class
Coolie
Sundries including carriage of quick set polymer etc.,

Details of Cost for : 1.00 Sqm

Unit
Quantity

Rate

sqm

1.025

1630.00

L.S.
per k

6.24
10.00

1.49
16.00

Day
Day
L.S.

0.20
0.40
26.91

301.00
247.00
1.49
Total:

Page 446 of 2298

Add water charges @ 1% on

2039.15

Add C.P & OH @15% on

2059.54
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2368.47
Rs 2468.45

Item Code: 11.50

Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.

Code
9999

Description
Mortar for pointing in white cement with matching pigment

Details of Cost for : -1.00 Sqm

Unit
Quantity
L.S.
3.12

9999

Labour

L.S.

1.00

Add water charges @ 1% on

Rate
1.49
1.49
Total:
6.14

Add C.P & OH @15% on

6.20
Cost for -1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

-Rs 7.13
-Rs 7.15

Item Code: 12.1.1

Prdg corrugated G.S. sheet roofing excluding the cost of purlins, rafters and trusses - 1.00mm thick with zinc coating not less than
275gm/sqm
Details of Cost for : 184.52 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
C.G.S. sheets 2x27 =54 nos. of size 2.5x0.9
metre @19.35 Kg each =1044.90Kg.
2x27=54 nos. of size
[email protected]. each = 1170.18Kg.
Total = 2215.08Kg.+
Add 5% Wastage = 110.75Kg.
= 2325.83 Kg.
23.26 quintals
3050
C.G.I sheets - 0.63mm thick
quint
23.26
5075.00
2302
Carriage of C.G.I sheets
tonne
2.326
77.87
(c) G.I.Seam bolts and nuts 60cm
centre to centre zig-zag i.e. 30cm
centre to centre straight
Breadth is 5.1 metre
No. of bolts in one lap 5.1/0.3 =17 nos.
2x26(laps)x17 nos. = 884 nos.
1022
G.I seam bolts and nuts
10 No
884.00
20.00
(d) G.I..J or L hooks 8mm dia.
(No. of purlins to be used 5 on either
side)2x5x27
(No. of sheets)x23 nos. of bolts
in each sheet = 810 nos.
1023
G.I J or L hooks 8mm dia with nuts and bolts
10 No
810.00
90.00
1207
Limpet washers
100 N
1694.00
35.00
1208
GI washers
100 N
1694.00
25.00
9999
Carriage of bolts and washers
L.S.
26.91
1.49
9999
Sundries
L.S.
53.82
1.49

DSR-12

Page 447 of 2298

0130
0112
0114
4202
9999
0131
0115
9999
0845
9999
0131
0115
9999
9999

LABOUR:
Mistry
Carpenter II class
Beldar
Zinc chromate - Red Oxide - primer
Carriage of materials
Painter
Coolie
Brushes, sand papers i/c sundries
Ready mixed paint
Carriage of paint
Painter
Coolie
Brushes, sand papers
Sundries

Day
Day
Day
litre
L.S.
Day
Day
L.S.
litre
L.S.
Day
Day
L.S.
L.S.

1.30
15.50
15.50
2.53
0.52
1.13
1.13
50.57
3.75
6.76
2.53
2.53
31.98
38.09

Add water charges @ 1% on

301.00
273.00
247.00
68.00
1.49
273.00
247.00
1.49
110.00
1.49
273.00
247.00
1.49
1.49
Total:
139549.95

Add C.P & OH @15% on

140945.45
Cost for 184.52 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 878.43
Rs 878.45

Item Code: 12.1.2

Prdg corrugated G.S. sheet roofing excluding purlins, rafters etc.,.. - 0.80mm thick with zinc coating not less than 275gm/m

Code

3050
2302

DSR-12

Details of Cost for : 184.52 Sqm

Description
Unit
Quantity
Rate
Details of length and breadth.
Length
26(laps)xO.135(each lap)=3.51
Width of Corrugated sheet with 10 corrugation measured end
to end = 0.8 metres 27 (nos. of sheets)x0.80 (width of sheet) =
21.60 length
Less laps = 3.51
Length = 18.09
Breadth on one sideC.G.S. Sheet 1 No. of = 2.5 metres length+
C.G.S. Sheet 1 No. of = 2.8 metres length
= 5.3 metres
Deduct end lap of 20cm (-)0.2 metres
breadth = 5.1 m
MATERIALS:
C.G.I.Sheets 0.8mm thick
2x27=54nos. @15.82Kg.each = 854.38Kg(X)
2.5mx0.9m is the size of plain G.I.sheet which on being
corrugated will become 2.5mx0.8m
(The size of plain sheet is taken because the weight is
available only of plain sheets)
(Refer l.S. Code 277-1962)
2x27=54nos. of size. 2.8x0.9
@17.72Kg each = 956.8Kg (Y)
Total of (X)+(Y) = 1811.16Kg.
Add wastage @5% = 90.56Kg.
= 1901.72Kg
(a) Sheets
quint
19.02
5075.00
(b) Carriage of sheet
tonne
1.902
77.87

Page 448 of 2298

1022

1023
1207
1208
9999
9999
0130
0112
0114
4202
9999
0131
0115
9999
0845
9999
0131
0115
9999
9999

(c) G.I. seam bolts and nuts 60cm centre to centre zig zag i.e.
30cm. centre to centre straight
Breadth is 5.1 metre
No. of bolts in one lap 5.1/0.3 =17 nos.
2x26(laps)xl7 nos. = 884 nos.
Bolts and nuts
(d) G.I., j or L hooks 8mm dia.
(No. of purlins to be used 5 on either side)2x5x27 (No. of
sheets)x23 nos. of bolts in each sheet = 810 nos.
G.I. J or L hooks
(e) Limpet washers (total of seam and J bolts)
884+810=1694
(f) Bitumen washers
(g) Carriage of bolts and washers
Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar
Zink chromate yellow primer
Carriage of material
Painter
Coolie
Brushes, sand papers i/c sundries
Ready mixed paint on new work
Carriage of paint
Painter
Coolie
Brushes and Sandpapers
Sundries

10 No

884.00

20.00

10 No
100 N

810.00
1694.00

90.00
35.00

100 N
L.S.
L.S.

1694.00
26.91
53.82

25.00
1.49
1.49

1.30
15.50
15.50
2.53
0.52
1.13
1.13
50.57
3.75
6.76
2.53
2.53
31.98
38.09

301.00
273.00
247.00
68.00
1.49
273.00
247.00
1.49
110.00
1.49
273.00
247.00
1.49
1.49
Total:
117998.93

Day
Day
Day
litre
L.S.
Day
Day
L.S.
litre
L.S.
Day
Day
L.S.
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

119178.92
Cost for 184.52 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 742.77
Rs 742.80

Item Code: 12.1.3

Prdg corrugated G.S. sheet roofing excluding purlins etc - 0.63 mm thick with zinc coating not less than 275gm/ m

Code

DSR-12

Description
Considering a roof with each sloping side
18.09x5.10m and the slope being flatter than 1
vertical to 2.5 horizontal
Details of cost for area of roof.
2x18.09x5.1 = 184.518 sqm.
Details of length and breadth.
Length
26(laps)xO.135(each lap)=3.51
Width of Corrugated sheet with 10 corrugation
measured end to end = 0.8 metres 27 (nos. of
sheets)x0.80 (width of sheet = 21.60 length
Less laps = 3.51
Length = 18.09
Breadth on one sideC.G.S. Sheet 1 No. of = 2.5 metres length+

Details of Cost for : 184.52 Sqm

Unit
Quantity

Rate

Page 449 of 2298

3050
2302

1022

1023
1207
1208
9999
9999
0130
0112
0114
4202
9999
0131
0115
9999
0845
9999
0131
0115
9999
9999

C.G.S. Sheet 1 No. of = 2.8 metres length

= 5.3 metres
Deduct end lap of 20cm (-)0.2 metres
breadth = 5.1m
Materials:
C.G.I.Sheets 0.8mm thick
2x27=54nos. @12.82Kg.each
= 692.28 Kg(X)
2.5mxO.9m is the size of plain G.I.sheet which
on being corrugated will become 2.5mxO.8m
(The size of plain sheet is taken because the
weight is available only of plain sheets)
(Refer I.S. Code 277-1962)
2x27=54nos. of size-2.8x0.9
@13.38Kg each = 775.44Kg (Y)
Total of (X)+(Y) = 1467.72Kg.
Add wastage @5% = 73.39Kg.
= 1541.11HKg
(a) Sheets
(b) Carriage of sheet
(c) G.I. seam bolts and nuts 60cm
centre to centre zig zag i.e. 30cm.
centre to centre straight
Breadth is 5.1 metre
No. of bolts in one lap 5.1/0.3 =17 nos.
2x26(laps)xl7 nos. = 884 nos.
Bolts and nuts
(d) G.I., J or L hooks 8mm dia.
(No. of purlins to be used 5 on either
side)2x5x27 (No. of sheets)x23 nos. of bolts
in each sheet = 810 nos.
G.I. J or L hooks
(e) Limpet washers (total of seam and J bolts)
884+810= 1694
(f) Bitumen washers
(g) Carriage of bolts and washers
Sundries
Labour:
Mistry
Carpenter 2nd class
Beldar
Zink chromate yellow primer
Carriage of material
Painter
Coolie
Brushes, sand papers i/c sundries
Ready mixed paint on new work
Carriage of paint
Painter
Coolie
Brushes and Sandpapers
Sundries

quint
tonne

15.41
1.54

5075.00
77.87

10 No

884.00

20.00

10 No
100 N

810.00
1694.00

90.00
35.00

100 N
L.S.
L.S.

1694.00
26.91
53.82

25.00
1.49
1.49

1.30
15.50
15.50
2.53
0.52
1.13
1.13
50.57
3.75
6.76
2.53
2.53
31.98
38.09

301.00
273.00
247.00
68.00
1.49
273.00
247.00
1.49
110.00
1.49
273.00
247.00
1.49
1.49
Total:
99649.99

Day
Day
Day
litre
L.S.
Day
Day
L.S.
litre
L.S.
Day
Day
L.S.
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

100646.49
Cost for 184.52 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 627.27
Rs 627.25

Page 450 of 2298

Item Code: 12.2.1

Extra for straight cutting in CGS sheet roofing exceeding 40 Sqm for chimney, sky light etc 1.00 mm thick.
Details of Cost for : 3.00 m
Code
Description
Unit
Quantity
Details of cost for 3 metres periphery
Assuming a hole of 10dmx5dm area of the hole 50 sqdm and
the perimeter of the hole 3 metre
LABOUR:
0102
Blacksmith first class
Day
0.15
0114
Beldar
Day
0.15
Add water charges @ 1% on

Rate

301.00
247.00
Total:
82.20

Add C.P & OH @15% on

83.02
Cost for 3.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 31.82
Rs 31.80

Item Code: 12.2.2

Extra for straight cutting in CGS sheet roofing exceeding 40 Sqm for chimney, sky light etc 0.80 mm thick.
Details of Cost for : 3.00 m
Code
Description
Unit
Quantity
Details of cost for 3 metres periphery
Assuming a hole of 10dmx5dm area of the hole 50 sqdm and
the perimeter of the hole 3 metre
LABOUR:
0102
Blacksmith first class
Day
0.12
0114
Beldar
Day
0.12
Add water charges @ 1% on

Rate

301.00
247.00
Total:
65.76

Add C.P & OH @15% on

66.42
Cost for 3.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 25.46
Rs 25.45

Item Code: 12.2.3

Extra for straight cutting in CGS sheet roofing exceeding 40 Sqm for chimney, sky light etc 0.63 mm thick.
Details of Cost for : 3.00 m
Code
Description
Unit
Quantity
Details of cost for 3 metres periphery
Assuming a hole of 10dmx5dm area of the hole 50sqdm and
the perimeter of the hole 3 metre
LABOUR:
0102
Blacksmith first class
Day
0.12
0114
Beldar
Day
0.12
Add water charges @ 1% on

Rate

301.00
247.00
Total:
65.76

Add C.P & OH @15% on

66.42
Cost for 3.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 25.46
Rs 25.45

Page 451 of 2298

Item Code: 12.3.1

Extra for circular cutting in CGS sheet roofing exceeding 40 Sqm 1.00 mm thick.
Details of Cost for : 15.71 m
Code
Description
Unit
Quantity
Details of cost for 10 holes of 0.5 metre dia-metre
Perimetre of 10 nos 10x22/7x0.5 = 15.71 metre
LABOUR:
0102
Blacksmith first class
Day
3.13
0114
Beldar
Day
6.26
Add water charges @ 1% on

Rate

301.00
247.00
Total:
2488.35

Add C.P & OH @15% on

2513.23
Cost for 15.71 m
Rate per One Metre:
Rate as per DSR-12:

Rs 183.97
Rs 183.95

Item Code: 12.3.2

Extra for circular cutting in CGS sheet roofing exceeding 40 Sqm 0.80 mm thick.
Details of Cost for : 15.71 m
Code
Description
Unit
Quantity
Details of cost for 10 holes of 0.5 metre dia-metre
Perimetre of 10 nos 10x22/7x0.5 =15.71 metre
LABOUR:
0102
Blacksmith first class
Day
2.50
0114
Beldar
Day
5.00
Add water charges @ 1% on

Rate

301.00
247.00
Total:
1987.50

Add C.P & OH @15% on

2007.38
Cost for 15.71 m
Rate per One Metre:
Rate as per DSR-12:

Rs 146.94
Rs 146.95

Item Code: 12.3.3

Extra for circular cutting in CGS sheet roofing exceeding 40 Sqm 0.63 mm thick
Details of Cost for : 15.71 m
Code
Description
Unit
Quantity
Details of cost for 10 holes of 0.5 metre dia-metre
Perimetre of 10 nos 10x22/7x0.5 = 15.71 metre
LABOUR:
0102
Blacksmith first class
Day
2.50
0114
Beldar
Day
5.00
Add water charges @ 1% on

Rate

301.00
247.00
Total:
1987.50

Add C.P & OH @15% on

2007.38
Cost for 15.71 m
Rate per One Metre:
Rate as per DSR-12:

Rs 146.94
Rs 146.95

Item Code: 12.4.1

DSR-12

Page 452 of 2298

Providing ridges or hips of plain GS sheet fixed with GI J or L hooks 0.80 mm thick
Details of Cost for : 10.35 m
Code
Description
Unit
Quantity
0.80mm thick with zinc coating not less than 275gm/sqm

Rate

Consider the length of the ridge 10.35 metres.

The ridge will be made out of plain G.I. Sheets 0.9mx1.8m

0992
2302

0222
1211
1208
9999
9999
0130
0102
0103
0114

Three pieces will be 0.9m long and 0.60m wide overlapping

22.5cm.
MATERIALS
G.I. plain sheets 0.80 thick 1.80x0.90msize5nos. @
11.39Kg. sheet = 56.95Kg +
Add 2% wastage = 1.14 Kg.
= 58.09 Kg. or 0.58 qunital
G.I. plain sheets
Carriage of sheets
G.I. seam bolts and nuts25mmx6mm (There are 14 joints)
G.I. seam bolts and nuts
G.I. plain washers
Bitumen washers
Carriage of seam bolts and washers
Sundries
LABOUR:
Mistry
Blacksmith first class
Blacksmith 2nd class
Beldar

quint
tonne

0.58
0.058

4750.00
77.87

10 No
100 N
100 N
L.S.
L.S.

28.00
28.00
28.00
1.82
13.52

35.00
32.00
25.00
1.49
1.49

0.40
1.20
0.80
2.40

301.00
301.00
273.00
247.00
Total:
4189.13

Day
Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

4231.02
Cost for 10.35 m
Rate per One Metre:
Rate as per DSR-12:

Rs 470.11
Rs 470.10

Item Code: 12.4.2

Providing ridges or hips of plain GS sheet fixed with GI J or L hooks 0.63 mm thick .
Details of Cost for : 10.35 m
Code
Description
Unit
Quantity
Details of cost for 10.35 metre long ridge.
G.I.plain sheets 0.63mm thick
1.8xO.9m size 5 nos. @9.23 Kg. per sheet = 46.15 Kg.+
Add 2% wastage = 0.91 Kg.
= 47.07 Kg. Say 47 Kg.
0992
G.I. plain sheets
quint
0.47
2302
Carriage of sheets
tonne
0.047
G.I. seam bolts and nuts25mmx6mm (There are 14 joints)
0222
G.I. seam bolts and nuts
10 No
28.00
1211
G.I. plain washers
100 N
28.00
1208
Bitumen washers
100 N
28.00
9999
Carriage of seam bolts and washers
L.S.
1.82
9999
Sundries
L.S.
13.52
LABOUR:
0130
Mistry
Day
0.40
0102
Blacksmith first class
Day
1.20

DSR-12

Rate

4750.00
77.87

35.00
32.00
25.00
1.49
1.49
301.00
301.00

Page 453 of 2298

0103
0114

Blacksmith 2nd class

Beldar

Day
Day

0.80
2.40

Add water charges @ 1% on

273.00
247.00
Total:
3665.77

Add C.P & OH @15% on

3702.43
Cost for 10.35 m
Rate per One Metre:
Rate as per DSR-12:

Rs 411.38
Rs 411.40

Item Code: 12.5.1

Providing valleys of 90cm wide overall in plain GS sheet 1.60 mm thick
Code

0992
2302

0222
1211
1208
9999
9999
0130
0102
0103
0114

Details of Cost for : 9.325 m

Unit
Quantity

Description

MATERIALS:
G.I. plain sheets 2.5x0.9m 4 nos. @ 29.95Kg/sheet
=119.80Kg.+
Add 2% wastage = 2.40Kg.
= 122.20 kg. or 1.222quintal
G.I. plain sheets
quint
Carriage of sheets
tonne
G.I. seam bolts and nuts25mmx6mm (There are 14 joints)
G.I. seam bolts and nuts
10 No
G.I. plain washers
100 N
Bitumen washers
100 N
Carriage of bolts, nuts and washers
L.S.
Sundries
L.S.
LABOUR:
Mistry
Day
Blacksmith first class
Day
Blacksmith 2nd class
Day
Beldar
Day

Rate

1.222
0.12

4750.00
77.87

12.00
12.00
12.00
0.91
13.52

35.00
32.00
25.00
1.49
1.49

0.40
1.20
0.80
2.40

301.00
301.00
273.00
247.00
Total:
7176.98

Add water charges @ 1% on

Add C.P & OH @15% on

7248.75
Cost for 9.325 m
Rate per One Metre:
Rate as per DSR-12:

Rs 893.95
Rs 893.95

Item Code: 12.6.1

Providing flashing of 40cm over all width in plain, GS sheet 1.00 mm thick
Code

0992
2302

0222

DSR-12

Details of Cost for : 12.125 m

Description
Unit
Quantity
Consider a length of flashing 12.125 metres.
MATERIALS:
G.I. plain sheet 1.25mm thick 3.2xO.75m
2 nos. @ 20.64 Kg. =41.28 Kg.+
Add 2% wastage = 0.83 Kg
= 42.11 Kg. or 0.4211 quintal
G.I. plain sheets
quint
0.4211
Carriage of sheets
tonne
0.041
G.I. seam bolts and nuts-25mmx6mm (taking 2 bolts per
joints)
G.I. seam bolts and nuts
10 No
6.00

Rate

4750.00
77.87

35.00

Page 454 of 2298

1207
1208
9999
9999
0130
0102
0103
0114

Limpet washers
Bitumen washers
Carriage of G.I. seam bolts and washers
sundries
LABOUR:
Mistry
Blacksmith first class
Blacksmith 2nd class
Beldar

100 N
100 N
L.S.
L.S.
Day
Day
Day
Day

6.00
6.00
0.39
10.79

35.00
25.00
1.49
1.49

0.50
1.48
1.00
3.00

301.00
301.00
273.00
247.00
Total:
3654.66

Add water charges @ 1% on

Add C.P & OH @15% on

3691.21
Cost for 12.125 m
Rate per One Metre:
Rate as per DSR-12:

Rs 350.09
Rs 350.10

Item Code: 12.7.1

P/F 15cm wide 45cm over all semi-circular plain GS sheet gutter 0.80 mm thick .
Details of Cost for : 9.04 m
Code
Description
Unit
Quantity
0.80mm thick with zinc coating not less than 275gm/sqm

0992
2302
1008
1022
1024
1210
1208
9999
9999
0102
0114
9999
0130
0102
0112
0114

Consider a length of 9.04m

Sheet used = 2.5x0.90m
= 2 nos.
Wt. = 2x15.82=31.64 Kg.
= 0.3164quintal
G.I. plain sheets
Carriage of sheets
Flats upto 10 mm in thickness
Galvanised steel bolts and nuts 6 mm dia and 25 mm long
round head with slot
Galvanised steel bolts and nuts 10 mm dia and 125 mm long
G.I. plain washers thin
Bitumen washers
Carriage of G.I. seam bolts and washers
Sundries
LABOUR:
Blacksmith first class
Beldar
Sundries
Mistry
Blacksmith first class
Carpenter 2nd class
Beldar

Rate

quint
tonne
quint
10 No

0.3164
0.0316
0.0749
20.00

4750.00
77.87
4200.00
20.00

each

30.00

10.00

100 N
100 N
L.S.
L.S.

70.00
40.00
2.73
5.33

30.00
25.00
1.49
1.49

Day
Day
L.S.
Day
Day
Day
Day

0.50
0.50
12.61
0.28
0.84
0.62
1.68

301.00
247.00
1.49
301.00
301.00
273.00
247.00
Total:
3417.08

Add water charges @ 1% on

Add C.P & OH @15% on

3451.25
Cost for 9.04 m
Rate per One Metre:
Rate as per DSR-12:

Rs 439.04
Rs 439.05

Item Code: 12.7.2

DSR-12

Page 455 of 2298

P/F 15 cm wide 45 cm over all semi circular plain G.S. sheet gutter - 0.63 mm thick .
Details of Cost for : 9.04 m
Code
Description
Unit
Quantity
0.63mm thick with zinc coating not less than 275gm/sqm

0992
2302
1008
1022
1024
1210
1208
9999
9999
0102
0114
9999
0130
0102
0112
0114

Consider a length of 9.04m Sheet used = 2.5x0.90m

= 2 nos.
Wt. = 2x11.82=23.64 Kg. = 0.2364quintal
G.I. plain sheets
Carriage of sheets
Flats upto 10 mm in thickness
Galvanised steel bolts and nuts 6 mm dia and
25 mm long round head with slot
Galvanised steel bolts and nuts 10 mm dia and
125 mm long
G.I. plain washers thin
Bitumen washers
Carriage of G.I. seam bolts and washers
Sundries L.S.
LABOUR:
Blacksmith first class
Beldar
Sundries
Mistry
Blacksmith first class
Carpenter 2nd class
Beldar

Rate

quint
tonne
quint
10 No

0.2364
0.0236
0.0749
20.00

4750.00
77.87
4200.00
20.00

each

30.00

10.00

100 N
100 N
L.S.
L.S.

70.00
40.00
2.73
5.33

30.00
25.00
1.49
1.49

Day
Day
L.S.
Day
Day
Day
Day

0.50
0.50
12.61
0.28
0.84
0.62
1.68

301.00
247.00
1.49
301.00
301.00
273.00
247.00
Total:
3036.46

Add water charges @ 1% on

Add C.P & OH @15% on

3066.82
Cost for 9.04 m
Rate per One Metre:
Rate as per DSR-12:

Rs 390.14
Rs 390.15

Item Code: 12.8

Providing Non-asbestos high impact Polypropylne RC 6mm thick corrugated sheet
Details of Cost for : 216.14 Sqm
Code
Description
Unit
Quantity
Upto 60 degree pitch
Consider a shed of 20x10 metres.
(External dimensions of plinth).
Area of roof20.2x10.70m = 216.14 sqm.
MATERIALS:
Sheets used = 2x20 nos.
x3.00 mx 1.05m= 126.00sqm+
2x20nos.x2.50mx1.05m=105.00sqm.
= 231.00sqm. +
Add 3% wastage = 6.93
= 237.93sqm.
0223
Non - Asbestos fibre cement corrugated sheet 6mm thick.
sqm
237.93

Rate

250.00

2x20x0.42147= 1.68588 +
2x20x0.35123= 1.4049
= 3.0908+
Add 3 % wastage = 0.092
= 3.1835 Say 3.184 t

DSR-12

Page 456 of 2298

2273
1023
1208
1209
9999
9999
0130
0112
0114

Carriage of sheets
G.I. J or L hooks with nuts and bolts 8 mm dia
Bitumen washers
Bitumen washers thick
Carriage of bolts and nuts, washers etc.
Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar

tonne
10 No
100 N
100 N
L.S.
L.S.
Day
Day
Day

3.184
476.00
476.00
476.00
8.06
39.52

77.87
90.00
25.00
32.00
1.49
1.49

2.34
9.34
9.34

301.00
273.00
247.00
Total:
69917.79

Add water charges @ 1% on

Add C.P & OH @15% on

70616.97
Cost for 216.14 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 375.73
Rs 375.75

Item Code: 12.9

Extra for straight cutting in non-asbestos high impact polypropylene RC corrugated, semi- corrugated 6mm thick sheet for chimney,
skylight etc
Details of Cost for : 3.00 m
Code
Description
Unit
Quantity
Rate
Details of cost for 3 metres of periphery
Area of cutting 0.9mx0.6m=0.54sqm.
Perimeter = 3 metres
LABOUR:
0111
Carpenter 1st class
Day
0.12
301.00
0114
Beldar
Day
0.12
247.00
Total:
Add water charges @ 1% on
65.76
Add C.P & OH @15% on
66.42
Cost for 3.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 25.46
Rs 25.45

Item Code: 12.10

Extra for circular cutting in non-asbestos high impact polyropylene RC corrugated /semi-corrugated 6mm thick sheet

Code

0111
0114

Details of Cost for : 9.05 m

Description
Unit
Quantity
Details of cost for 4 holes of 0.72 metre diameter i.e. 9.05
metre periphery
LABOUR:
Carpenter 1 st class
Day
1.00
Beldar
Day
1.00
Add water charges @ 1% on

Rate

301.00
247.00
Total:
548.00

Add C.P & OH @15% on

553.48
Cost for 9.05 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 70.33
Rs 70.35

Page 457 of 2298

Item Code: 12.11

Extra for P/F wind ties 40x6 mm flat
Code

1008
2205
9999
0102
0114

Details of Cost for : 30.00 m

Description
Unit
Quantity
Extra for providing and fixing wind ties of 40x6mm flat iron
section.
M.S. flat 40x6mm = 30 metres+
wastage @ 5% = 1.5 metres
= 31.50 metres @ 1.9 Kg per metre
= 59.85 Kg. = 0.5985 quintal
Flats upto 10 mm in thickness
quint
0.5985
Carriage of sheet
tonne
0.06
Sundries
L.S.
20.67
Blacksmith first class
Day
0.50
Beldar
Day
0.50
Add water charges @ 1% on

Rate

4200.00
77.87
1.49
301.00
247.00
Total:
2823.17

Add C.P & OH @15% on

2851.40
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 109.30
Rs 109.30

Item Code: 12.12.1

P/F ridges and hips in non-asbestos fiber cement high impact polypropylene reinforced roofing accessories Corrugated serrated
adjustable ridges.
Details of Cost for : 20.20 m
Code
Description
Unit
Quantity
Rate
One piece corrugated serrated adjustable ridges
Consider a shed of 20x10m (external dimensions at plinth).

0225
9999
9999
0130
0112
0114

Length of ridges 20.2 metre

MATERIALS:
Ridge piece required each of 1.22mm length =
19nos. +
Add 5% wastage = 0.95 No.
19.95 Nos x 1.22 = 24.339 metre
Non - Asbestos fibre cement corrugate serrated adjustable
ridge.
Carriage (The ridge is to be fixed with the same hooks as the
Sheets)
Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar

metre

24.339

200.00

L.S.

13.52

1.49

L.S.

6.76

1.49

Day
Day
Day

0.14
0.55
1.64

301.00
273.00
247.00
Total:
5495.38

Add water charges @ 1% on

Add C.P & OH @15% on

5550.33
Cost for 20.20 m
Rate per One Metre:
Rate as per DSR-12:

Rs 315.98
Rs 316.00

Item Code: 12.12.2

DSR-12

Page 458 of 2298

P/F ridges and hips in non-asbestos fiber cement high impact polypropylene reinforced roofing accessories Plain wing adjustable
ridges.
Details of Cost for : 20.20 m
Code
Description
Unit
Quantity
Rate
Plain wing adjustable ridges
Consider a shed of 20x10m (external dimensions at plinth).

0226
9999
9999
0130
0112
0114

Length of ridges 20.2 metre

MATERIALS:
Ridge piece required each of 1.22m length =
19 nos. +
Add 5% wastage = 0.95 No.
19.95 nos x 1.22 = 24.339 metre
Non - Asbestos fibre cement plain wing adjustable ridge.

metre

Carriage (The ridge is to be fixed with the same hooks as the L.S.
Sheets)
Sundries
L.S.
LABOUR:
Mistry
Day
Carpenter 2nd class
Day
Beldar
Day

24.339

200.00

13.52

1.49

6.76

1.49

0.14
0.55
1.64

301.00
273.00
247.00
Total:
5495.38

Add water charges @ 1% on

Add C.P & OH @15% on

5550.33
Cost for 20.20 m
Rate per One Metre:
Rate as per DSR-12:

Rs 315.98
Rs 316.00

Item Code: 12.12.3

P/F ridges and hips in non-asbestos fiber cement high impact polypropylene reinforced roofing accessories Close fitting adjustable
ridges.
Details of Cost for : 20.20 m
Code
Description
Unit
Quantity
Rate
Close fitting adjustable ridges
Consider a shed of 20x10m (external dimensions at plinth).

0224
9999
9999
0130
0112
0114

Length of ridges 20.2 metre

No. of ridge pairs required, of length
1.22m each = 22.00 nos. +
Add 5% wastage =1.10 Nos.
= 23.10 nos.x 1.22= 28.182 metre
Non - Asbestos fibre cement close fitting adjustable ridge.
Carriage
Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar

metre

28.182

200.00

L.S.
L.S.

16.12
7.15

1.49
1.49

Day
Day
Day

0.14
0.55
1.64

301.00
273.00
247.00
Total:
6268.44

Add water charges @ 1% on

Add C.P & OH @15% on

6331.12
Cost for 20.20 m
Rate per One Metre:

DSR-12

Rs 360.44

Page 459 of 2298

Rate as per DSR-12:

Rs 360.45

Item Code: 12.12.4

P/F ridges and hips in non-asbestos fiber cement high impact polypropylene reinforced roofing accessories
hips.
Details of Cost for : 20.20 m
Code
Description
Unit
Quantity
Unserrated adjustable hips
Consider a shed with hip as 20.2 metres
No. of hi pieces required = 19 pairs
Length of each pair 1.22 metres
Add 5 % wastage
= 0.95 pairs
= 19.95 pairs x 1.22 = 24.339 metre
0227
Non - Asbestos fibre cement unserrated adjustable ridge for metre
24.339
hips.
9999
Carriage
L.S.
6.76
9999
Sundries
L.S.
6.63
LABOUR:
0130
Mistry
Day
0.14
0112
Carpenter 2nd class
Day
0.55
0114
Beldar
Day
1.64
Add water charges @ 1% on

Unserrated adjustable

Rate

280.00
1.49
1.49
301.00
273.00
247.00
Total:
7432.24

Add C.P & OH @15% on

7506.56
Cost for 20.20 m
Rate per One Metre:
Rate as per DSR-12:

Rs 427.35
Rs 427.35

Item Code: 12.13.1

P/F non-asbestos fiber cement high impact poly-propylene reinforced roofing accessories Corrugated Apron pieces.

Code

0228
9999
9999
0130
0112
0114

Description
Details for shed of 20.2 metres completed length
MATERIALS:
Corrugated appron pieces of 1.12 metre
length = 20 nos.+
Add 5% wastage = 1.0 No.
= 21 nos.x 1.12=23.52 metre
Non - Asbestos fibre cement corrugated appron piece.
Carriage of appron pieces. (The appron pieces are to be fixed
with the same hooks as the s
Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar

Details of Cost for : 20.20 m

Unit
Quantity

metre
L.S.

Rate

23.52
3.25

200.00
1.49

L.S.

3.25

1.49

Day
Day
Day

0.07
0.28
0.82

301.00
273.00
247.00
Total:
5013.73

Add water charges @ 1% on

Add C.P & OH @15% on

5063.87
Cost for 20.20 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 288.29
Rs 288.30

Page 460 of 2298

Item Code: 12.13.2

P/F non-asbestos fiber cement high impact poly-propylene reinforced roofing accessories Eave's filler pieces.

Code

0229
9999
9999
0130
0112
0114

Details of Cost for : 20.20 m

Description
Unit
Quantity
Details of eaves filler for a shed of 20.2 metres complete
length
MATERIALS:
Eaves filler pieces of 1.016 metres
length = 20 nos.+
Add 5% wastage = 1.0 No.
= 21 nos.
Non - Asbestos fibre cement eaves filler piece.
each
21.00
(The eaves filler pieces are to be fixed with the same hooks as L.S.
3.25
the sheets)
Sundries
L.S.
3.25
LABOUR:
Mistry
Day
0.07
Carpenter 2nd class
Day
0.28
Beldar
Day
0.82
Add water charges @ 1% on

Rate

150.00
1.49
1.49
301.00
273.00
247.00
Total:
3459.73

Add C.P & OH @15% on

3494.33
Cost for 20.20 m
Rate per One Metre:
Rate as per DSR-12:

Rs 198.93
Rs 198.95

Item Code: 12.13.3

P/F non-asbestos fiber cement high impact poly-propylene reinforced roofing accessories North light curves.
Details of Cost for : 20.20 m
Code
Description
Unit
Quantity
Details of North light curve 20.2 metres long complete length

0230
1023
1209
1208
9999
9999
0130
0112
0114

MATERIALS:
North light curves of 1.016 metres
nominal length = 20 nos. +
Add 5% wastage = 1.0 No.
= 21 nos.x 1.016 = 21.336 metre
Non - Asbestos fibre cement north light curves.
G.I. J or L hooks with nuts and bolts 8 mm dia
Bitumen washers
Bitumen washers thick
Carriage of hooks, nuts, washers and curves
Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar

metre
10 No
100 N
100 N
L.S.
L.S.
Day
Day
Day

Rate

21.336
40.00
40.00
40.00
9.88
6.24

310.00
90.00
32.00
25.00
1.49
1.49

0.10
0.30
1.00

301.00
273.00
247.00
Total:
7379.98

Add water charges @ 1% on

Add C.P & OH @15% on

7453.78
Cost for 20.20 m
Rate per One Metre:

DSR-12

Rs 424.35

Page 461 of 2298

Rate as per DSR-12:

Rs 424.35

Item Code: 12.13.4

P/F non-asbestos fiber cement high impact poly-propylene reinforced roofing accessories Ventilator curves.
Details of Cost for : 20.20 m
Code
Description
Unit
Quantity
Details of ventilator curve 20.2 metres long complete length

Rate

MATERIALS:
North light curves of 1.016 metres nominal length = 20 nos. +

0231
1023
1209
1208
9999
9999
0130
0112
0114

Add 5% wastage = 1.0 No.

= 21 nos.x 1.016 = 21.336 metre
Non - Asbestos fibre cement ventilator curves.
G.I. J or L hooks with nuts and bolts 8 mm dia
Bitumen washers
Bitumen washers thick
Carriage of hooks, nuts, washers and curves
Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar

each
10 No
100 N
100 N
L.S.
L.S.
Day
Day
Day

21.336
40.00
40.00
40.00
9.88
6.24

390.00
90.00
32.00
25.00
1.49
1.49

0.10
0.30
1.00

301.00
273.00
247.00
Total:
9086.86

Add water charges @ 1% on

Add C.P & OH @15% on

9177.73
Cost for 20.20 m
Rate per One Metre:
Rate as per DSR-12:

Rs 522.49
Rs 522.50

Item Code: 12.13.5

P/F non-asbestos fiber cement high impact poly-propylene reinforced roofing accessories Barge boards.
Details of Cost for : 9.70 m
Code
Description
Unit
Quantity
Completed length of barge boards
MATERIALS:
Barge boards 2.50metres = 4 nos. x 2.50 = 10.00 metre
Add 5% wastage = 0.50 metre.
= 10.50 metre.
0232
Non - Asbestos fibre cement barge boards 6 mm thick.
metre
10.50
0222
Seam bolts and nuts 6 mm dia and 25 mm long
10 No
5.00
1211
G.I. plain washers
100 N
10.00
1208
Bitumen washers
100 N
5.00
9999
Carriage of barge boards, bolts, nuts and washers
L.S.
9.36
9999
Sundries
L.S.
6.76
LABOUR:
0130
Mistry
Day
0.04
0112
Carpenter 2nd class
Day
0.06
0114
Beldar
Day
0.40
Add water charges @ 1% on

Rate

395.00
35.00
32.00
25.00
1.49
1.49
301.00
273.00
247.00
Total:
4320.69

Add C.P & OH @15% on

4363.90
Cost for 9.70 m
Rate per One Metre:

DSR-12

Rs 517.37

Page 462 of 2298

Rate as per DSR-12:

Rs 517.35

Item Code: 12.13.6

P/F non-asbestos fiber cement high impact poly-propylene reinforced roofing accessories Ridge finials.
Details of Cost for : 1.00 pairs
Code
Description
Unit
Quantity
Details of a pair of ridge finials
MATERIALS:
Ridge finials = 1pair
Add 5% wastage = 0.05pair.
= 1.05 pair
0233
Non - Asbestos fibre cement ridge finial.
pair
1.05
9999
Carriage, sundries, fixing charges including
L.S.
10.79
Add water charges @ 1% on

Rate

140.00
1.49
Total:
163.08

Add C.P & OH @15% on

164.71
Cost for 1.00 pairs
Rate per Each Pair:
Rate as per DSR-12:

Rs 189.42
Rs 189.40

Item Code: 12.13.7

P/F non-asbestos fiber cement high impact poly-propylene reinforced roofing accessories Special North light curves.

Code

0234
1023
1209
1208
9999
9999
0130
0112
0114

Description
Details of special north light ventilator curve 20.2 metres long
complete length
MATERIALS:
Special north light curves of 1.016 metres
nominal length = 20 nos. +
Add 5% wastage = 1.0 No.
= 21 nos.
Non - Asbestos fibre cement special north light curves.
G.I. J or L hooks with nuts and bolts 8 mm dia
Bitumen washers
Bitumen washers thick
Carriage of hooks, nuts, washers and curves
Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar

Details of Cost for : 20.00 Nos

Unit
Quantity

each
10 No
100 N
100 N
L.S.
L.S.
Day
Day
Day

Rate

21.00
40.00
40.00
40.00
9.88
6.24

514.00
90.00
32.00
25.00
1.49
1.49

0.10
0.30
1.00

301.00
273.00
247.00
Total:
11559.82

Add water charges @ 1% on

Add C.P & OH @15% on

11675.42
Cost for 20.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 671.34
Rs 671.35

Item Code: 12.13.8

P/F non-asbestos fiber cement high impact poly-propylene reinforced roofing accessories S type louvers.
Details of Cost for : 8.74 m
Code
Description
Unit
Quantity

DSR-12

Rate

Page 463 of 2298

0235
9999
1031
1032
1208
1210
9999
9999
0111
0114
0102

MATERIALS:
S type louvers = 5 nos.+
Add 5% wastage = 0.25 nos.
= 5.25 nos.
Non - Asbestos fibre cement S type louvers.
Carriage
Galvanised steel bolts & nuts 10 mm dia and 27 cm long both
sides threaded with 4 galvanis
Galvanised steel bolts 10 mm dia and 7 cm long with nuts
Bitumen washers
G.I. plain washers thin
Carriage of bolts and nuts and washers
Sundries
LABOUR:
Carpenter 1st class
Beldar
Blacksmith 1st class

each
L.S.
each

5.25
10.79
6.00

250.00
1.49
20.00

each

6.00

15.00

100 N
100 N
L.S.
L.S.

18.00
36.00
2.73
13.39

25.00
30.00
1.49
1.49

1.00
1.00
0.12

301.00
247.00
301.00
Total:
2162.02

Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

2183.64
Cost for 8.74 m
Rate per One Metre:
Rate as per DSR-12:

Rs 287.32
Rs 287.30

Item Code: 12.14

Providing flat iron brackets 50x3mm size for fixing non- asbestos cement/ GS sheets gutters with purlins
Details of Cost for : 20.00 m
Code
Description
Unit
Quantity
MATERIAL:
Flat 5 0x3 mm size
1008
Flats up to 10 mm in thickness
quint
0.1163
1025
M.S. bolts 6 mm dia and 25 mm long with
10 No
38.00
1210
G.I. plain washers thin
100 N
19.00
9999
Sundries
L.S.
1.04
0102
Blacksmith 1 class
Day
0.38
0114
Beldar
Day
0.38
Add water charges @ 1% on

Rate

4200.00
25.00
30.00
1.49
301.00
247.00
Total:
798.95

Add C.P & OH @15% on

806.94
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 46.40
Rs 46.40

Item Code: 12.15.1

Painting top of roofs with bitumen @ 17 kg/ 10 sqm ...With residual type petroleum bitumen of grade VG - 10
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
0309
Cost of Bitumen 80/100
tonne
0.017
37000.00
0771
Cost of kerosene oil
litre
1.22
30.00
0370
Cost of fuel for heating (steam coal)
quint
0.035
400.00
2211
Carriage of bitumen 80/100
tonne
0.017
87.60
0982
Coarse sand
cum
0.06
1120.00

DSR-12

Page 464 of 2298

2203
0114
0131
9999

Carriage of coarse sand

LABOUR:
Beldar (for cleaning the surface, applying kerosene oil, heating
materials and carrying t
Painter
Sundries (Brushes and T and P)

cum

0.06

87.60

Day

0.38

247.00

Day
L.S.

0.15
13.52

273.00
1.49
Total:
908.50

Add water charges @ 1% on

Add C.P & OH @15% on

917.59
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 105.52
Rs 105.50

Item Code: 12.16.1

10cm thick mud phaska of damped brick earth on roofs laid to slope and covered with tile bricks of class 10 with CM 1:3 NonModular brick tiles
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
Mud Phuska = 1.048 cum. +
Wastage 20% = 0.209
= 1.257 cum.
0811
Mud (dry)
cum
1.257
50.00
03.018
Mud mortar
Cum
0.263
301.12
Bhusa 0.263x35 = 9.20 +
5% wastage = 0.46
= 9.66 Kg.
0308
Bhusa
quint
0.10
375.00
9999
Cowdung
L.S.
5.33
1.49
9999
Mud mortar for gobri leaping
L.S.
8.06
1.49
9999
Carriage of bhusa and cowdung
L.S.
2.73
1.49
1984
Common burnt clay FPS brick tile class 10
1000
380.00
3100.00
2207
Carriage of tiles
1000
380.00
140.16
03.003
Cement mortar 1:3 (1 cement : 3 fine sand)
0.061
3631.93
Rate as for item No. 3.3
1213
Integral water proofing compound 2% by weight of cement
kilog
0.006
25.00
9999
0124
0114
0101

Sundries
LABOUR:
Mason 2nd class
Beldar
Bhisti

L.S.

6.76

1.49

Day
Day
Day

1.30
3.75
1.10

273.00
247.00
260.00
Total:
3233.74

Add water charges @ 1% on

Add C.P & OH @15% on

3266.08
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 375.60
Rs 375.60

Item Code: 12.17.1

10cm thick mud phaska of damped brick earth on roofs laid to slope and covered with machine moulded tile bricks of class 12.5
with CM 1:3 With machine moulded Non-Modular brick tiles.
Details of Cost for : 10.00 Sqm

DSR-12

Page 465 of 2298

Code

0811
03.018

0308
9999
9999
9999
7904
2207
03.003
1213
9999
0124
0114
0101

Description
Unit
MATERIALS:
Mud Phuska = 1.048 cum.
Wastage 20% = 0.209
= 1.257 cum.
Mud (dry)
cum
Mud mortar
Cum
Bhusa 0.263x35 = 9.20
5% wastage = 0.46
= 9.66 Kg. Say= 0.10 quintal.
Bhusa
quint
Cowdung
L.S.
Mud mortar for gobri leaping
L.S.
Carriage of bhusa and cowdung
L.S.
Machine moulded common burnt clay tile bricks of class 1000
designation 12.5
Carriage of tiles
1000
Cement mortar 1:3 (1 cement : 3 fine sand)
Cum
Integral water proofing compound 2% by
kilog
weight of cement
Sundries
L.S.
Labour:
Mason 2nd class
Day
Beldar
Day
Bhisti
Day

Quantity

Rate

1.257
0.263

50.00
301.12

0.10
5.33
8.06
2.73
380.00

375.00
1.49
1.49
1.49
3700.00

380.00
0.061
0.006

140.16
3631.93
25.00

6.76

1.49

1.30
3.75
1.10

273.00
247.00
260.00
Total:
3461.74

Add water charges @ 1% on

Add C.P & OH @15% on

3496.36
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 402.08
Rs 402.10

Item Code: 12.18

Extra for every addi 1cm thickness of mud phaska
Code

0811
0114
0101
9999

Description
MATERIALS:for 10 cm thickness.
Mud Phuska = 1.048 cum. +
Wastage 20% = 0.209
= 1.257
Quantity for ICM thickness 1.257/10=0.1257
Say 0.13 cum
Mud
Beldar
Bhisti
Labour for leaping and carring to roof

Details of Cost for : 10.00 Sqm

Unit
Quantity

cum
Day
Day
L.S.

0.13
0.07
0.04
26.91

Add water charges @ 1% on

Rate

50.00
247.00
260.00
1.49
Total:
74.29

Add C.P & OH @15% on

75.03
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 8.63
Rs 8.65

Page 466 of 2298

Item Code: 12.19.1

P/L brick tiles of class 100 over mumty roofs grouted with CM 1:3 12mm layer of CM 1:3 FPS brick tiles
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
1984
Common burnt clay FPS brick tile class 10
1000
380.00
2207
Carriage of tiles
1000
380.00
03.003
Cement mortar 1:3 (1 cement : 3 fine sand)
0.179
1213
Integral water proofing compound 2% by weight of cement
kilog
0.005

0124
0115
0101
9999

LABOUR:
Mason 2nd class
Coolie
Bhisti
Sundries

Day
Day
Day
L.S.

0.81
1.08
0.27
1.82

Add water charges @ 1% on

Rate
3100.00
140.16
3631.93
25.00

273.00
247.00
260.00
1.49
Total:
2442.31

Add C.P & OH @15% on

2466.73
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 283.67
Rs 283.65

Item Code: 12.20

P/L pressed clay brick tiles on roof laid over 20mm CM 1:4
Code
7266
2207
03.009
1213

03.009
0123
0114
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS:
Pressed clay tiles
Carraige of Brick tiles
Cement mortar 1:4 (1 cement : 4 coarse sand).
Integral water proofing compound 2% by weight of cement

Cement mortar 1:4 (1 cement : 4 coarse sand).

LABOUR :
Mason I class
Beldar
Sundries

Rate

units
1000
Cum

160.00
160.00
0.037

12150.00
140.16
3485.41

kilog
Cum

0.01
0.224

25.00
3485.41

Day
Day
L.S.

0.60
2.60
13.00

301.00
247.00
1.49
Total:
3718.54

Add water charges @ 1% on

Add C.P & OH @15% on

3755.73
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 431.91
Rs 431.90

Item Code: 12.21.1

Providing gola 75x75mm in CC 1:2:4 in 75 x 75 chase
Code

0297
2202
0982

DSR-12

Description
Details of cost for 10 metres cement concrete
MATERIALS:
Stone Aggregate (Single size): 10 mm nominal size
Carriage of Stone Aggregate below 40 mm
Coarse sand

Details of Cost for : 10.00 m

Unit
Quantity

cum
cum
cum

0.0836
0.0836
0.0418

Rate

1050.00
87.60
1120.00

Page 467 of 2298

2203
0367
2209
0114
0115
0101
0123
0124
0128
9999
9999
0123
0124
9999
0123
0124
0114
9999
03.003
0155
0115
0101
9999
9999

Carriage of coarse sand

Portland cement
Carriage of cement
Beldar
LABOUR:
Coolie
Bhisti
Mason 1 st class
Mason 2nd class
Mate
Hire and running charge of mechanical mixer
Sundries
Mason 1 st class
Mason 2nd class
Sundries
Mason 1st class
Mason 2nd class
Beldar
Carriage
Cement mortar 1:3 (1 cement : 3 fine sand)
Mason
Coolie
Bhisti
Hire and running charges of mechanical mixer
Sundries

cum
tonne
tonne
Day

0.0418
0.03
0.03
0.085

87.60
5000.00
77.87
247.00

Day
Day
Day
Day
Day
L.S.
L.S.
Day
Day
L.S.
Day
Day
Day
L.S.

0.056
0.025
0.005
0.005
0.0037
2.47
1.30
0.15
0.15
5.07
0.25
0.25
1.00
8.06
0.009
0.081
0.101
0.033
1.69
1.43

247.00
260.00
301.00
273.00
260.00
1.49
1.49
301.00
273.00
1.49
301.00
273.00
247.00
1.49
3631.93
287.00
247.00
260.00
1.49
1.49
Total:
938.99

Day
Day
Day
L.S.
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

948.38
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 109.06
Rs 109.05

Item Code: 12.22

Making khurras 45x45cm with min thickness 5cm CC 1:2:4
Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0128
9999
9999
3002
03.008
0155
0115
0101

DSR-12

Description
Stone Aggregate (Single size): 20 mm nominal size
Stone Aggregate (Single size): 10 mm nominal size
Carriage of Stone Aggregate below 40 mm nominal size
Coarse sand
Carriage of coarse sand
Portland cement
Carriage of cement
Beldar
Coolie
Bhisti
Mason 1 st class
Mason 2nd class
Mate
Hire and running charge of mechanical mixer
Sundries
PVC sheet 400 micron thick
Cement mortar 1:3 (1 cement : 3 coarse sand)
(Rate as per item No. 3.8)
Mason
Coolie
Bhisti

Details of Cost for : 1.00 No.

Unit
Quantity
cum
0.0067
cum
0.0022
cum
0.0089
cum
0.0044
cum
0.0044
tonne
0.0032
tonne
0.0032
Day
0.009
Day
0.006
Day
0.0027
Day
0.0005
Day
0.0005
Day
0.0004
L.S.
0.26
L.S.
0.13
sqm
1.00
0.0041
Day
Day
Day

0.0235
0.0235
0.0078

Rate
1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87
247.00
247.00
260.00
301.00
273.00
260.00
1.49
1.49
31.00
4145.53
287.00
247.00
260.00

Page 468 of 2298

9999
0367
2209
0155
0115
9999
9999

Sundries
Portland cement
Carriage of cement
Mason
Coolie
Rounding of edges and making outlet
Sundries

L.S.
tonne
tonne
Day
Day
L.S.
L.S.

0.39
0.0006
0.0006
0.008
0.008
0.26
13.52

Add water charges @ 1% on

1.49
5000.00
77.87
287.00
247.00
1.49
1.49
Total:
128.08

Add C.P & OH @15% on

129.36
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 148.76
Rs 148.75

Item Code: 12.23.1.1

Providing sand stone slab for roofing and laying them in CM 1 : 4 over wooden karries or R.C.C. battens : Red sand stone slab : 40 to
50 mm thick
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS :
1174
Stone slab including wastage @ 10% = 11 sqm
sqm
11.00
165.00
2216
Carriage of slab
tonne
1.27
77.87
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.0095
3485.41
(Rate as per item No. 3.9)
03.003
Cement mortar 1:3 (1 cement : 3 fine sand)
0.0075
3631.93
Rate as per item No. 3.3
LABOUR:
0155
Mason
Day
1.52
287.00
0100
Bandhani
Day
1.82
260.00
0115
Coolie
Day
1.52
247.00
0101
Bhisti
Day
0.30
260.00
9999
Sundries
L.S.
16.12
1.49
Total:
Add water charges @ 1% on
3361.14
Add C.P & OH @15% on
3394.75
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 390.40
Rs 390.40

Item Code: 12.23.2.1

Providing sand stone slab for roofing and laying them in CM 1 : 4 over wooden karries or R.C.C. battens : White sand stone slab : 40
to 50 mm thick
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS :
1175
Stone Slab including wastage @ 10% = 11sqm
sqm
11.00
185.00
2216
Carriage of slab
tonne
1.27
77.87
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.0095
3485.41
(Rate as per item No. 3.9)
0155
Mason
Day
1.52
287.00
0100
Bandhani
Day
1.82
260.00
0115
Coolie
Day
1.52
247.00
0101
Bhisti
Day
0.30
260.00
9999
Sundries
L.S.
16.12
1.49

DSR-12

Page 469 of 2298

03.003

Cement mortar 1:3 (1 cement : 3 fine sand)

Rate as per item No. 3.3

0.0075

3631.93

Add water charges @ 1% on

Total:
3581.14

Add C.P & OH @15% on

3616.95
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 415.95
Rs 415.95

Item Code: 12.24.1.1

P/F insulating board ceiling with n/a nails etc complete Natural colour insulating board 12 mm thick
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIAL :0332
Insulating board including 10% wastage =
sqm
11.00
11.00Sqm.
9999
Carriage of material
L.S.
17.55
9999
Nails
L.S.
26.91
LABOUR:
0111
Carpenter 1st class
Day
2.50
0114
Beldar
Day
2.00
9999
Scaffolding
L.S.
31.07
9999
Sundries
L.S.
31.07
Add water charges @ 1% on

Rate
270.00
1.49
1.49
301.00
247.00
1.49
1.49
Total:
4375.33

Add C.P & OH @15% on

4419.08
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 508.19
Rs 508.20

Item Code: 12.24.2.1

P/F insulating board ceiling with n/a nails etc complete White face insulating board 12 mm thick
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIAL :0328
White face insulating board 12 mm thick i/c
sqm
11.00
10% wastage 11 Sqm.
9999
Carriage of material
L.S.
17.55
9999
Nails
L.S.
26.91
LABOUR:
0111
Carpenter 1st class
Day
2.50
0114
Beldar
Day
2.00
9999
Scaffolding
L.S.
31.07
9999
Sundries
L.S.
31.07
Add water charges @ 1% on

Rate
360.00
1.49
1.49
301.00
247.00
1.49
1.49
Total:
5365.33

Add C.P & OH @15% on

5418.98
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 623.18
Rs 623.20

Page 470 of 2298

Item Code: 12.24.3.1

P/F insulating board ceiling with n/a nails etc complete Flame retardent face insulating board 12mm thick
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIAL :0336
Flame retardent face insulating board 12 mm thick including sqm
11.00
10% wastage 11.00 Sqm.
9999
Carriage of material
L.S.
17.55
9999
Nails
L.S.
26.91
LABOUR:
0111
Carpenter 1 st class
Day
2.50
0114
Beldar
Day
2.00
9999
Scaffolding
L.S.
31.07
9999
Sundries
L.S.
31.07
Add water charges @ 1% on

Rate
315.00
1.49
1.49
301.00
247.00
1.49
1.49
Total:
4870.33

Add C.P & OH @15% on

4919.03
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 565.69
Rs 565.70

Item Code: 12.25.1

P/F flat pressed 3 layer particle board (Grade I) in ceiling 12 mm thick
Code
0341
9999
9999
0111
0114
9999
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS :Standard quality board 12mm thick including
10% wastage = 11. Sqm.
Carriage
Nails
LABOUR:
Carpenter 1 st class
Beldar
Scaffolding
Sundries

Rate

sqm

11.00

325.00

L.S.
L.S.

14.95
26.91

1.49
1.49

Day
Day
L.S.
L.S.

2.50
2.00
31.07
31.07

301.00
247.00
1.49
1.49
Total:
4976.46

Add water charges @ 1% on

Add C.P & OH @15% on

5026.22
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 578.02
Rs 578.00

Item Code: 12.26.1

P/F plain multipurpose cement board in ceiling 6 mm thick cement board
Code
0236
9999
9999
0111
0114

DSR-12

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

MATERIALS :Non - Asbestos multi purpose fibre cement board 6mm thick. sqm
Carriage
Nails
LABOUR:
Carpenter 1st class
Beldar

Rate

11.00

182.00

L.S.
L.S.

14.95
26.91

1.49
1.49

Day
Day

2.50
2.00

301.00
247.00

Page 471 of 2298

9999
9999

Scaffolding
Sundries

L.S.
L.S.

31.07
31.07

Add water charges @ 1% on

1.49
1.49
Total:
3403.46

Add C.P & OH @15% on

3437.49
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 395.31
Rs 395.30

Item Code: 12.27.1

Extra for Circular cutting and waste in ceiling with 2nd class teak wood planks 20 mm thick
Details of Cost for : 15.71 m
Code
Description
Unit
Quantity
MATERIALS :0.5 metre dia. each = 10x22/7x0.5=15.71m
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
= 2.15 sqm.
1190
Teak wood 2nd class
cum
0.043
2204
Carriage
cum
0.043
0637
M.S. screws 40 mm long
100 N
31.00
LABOUR:
0111
Carpenter 1 st class
Day
2.65
0112
Carpenter 2nd class
Day
0.145
0114
Beldar
Day
2.79
9999
Scaffolding
L.S.
7.80
9999
Sundries
L.S.
14.69
Add water charges @ 1% on

Rate

72000.00
100.11
50.00
301.00
273.00
247.00
1.49
1.49
Total:
4675.68

Add C.P & OH @15% on

4722.44
Cost for 15.71 m
Rate per One Metre:
Rate as per DSR-12:

Rs 345.69
Rs 345.65

Item Code: 12.27.2.1

Extra for Circular cutting and waste in ceiling with Natural colour insulating board 12 mm thick
Details of Cost for : 15.71 m
Code
Description
Unit
Quantity
MATERIALS :0.5 metre dia. each = 10x22/7x0.5=15.71m
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
= 2.15 sqm.
0332
Insulating board
sqm
2.15
9999
Carriage
L.S.
3.38
9999
NailsL.S.
5.33
LABOUR:
0111
Carpenter 1st class
Day
0.49
0114
Beldar
Day
0.39
9999
Scaffolding
L.S.
6.11
9999
Sundries
L.S.
6.11
0111
Carpenter 1 st class
Day
2.50
0114
Beldar
Day
2.50
9999
Scaffolding
L.S.
10.79

DSR-12

Rate

270.00
1.49
1.49
301.00
247.00
1.49
1.49
301.00
247.00
1.49

Page 472 of 2298

Add water charges @ 1% on

Total:
2241.58

Add C.P & OH @15% on

2264.00
Cost for 15.71 m
Rate per One Metre:
Rate as per DSR-12:

Rs 165.73
Rs 165.75

Item Code: 12.27.3.1

Extra for Circular cutting and waste in ceiling with White face insulating board 12 mm thick
Details of Cost for : 15.71 m
Code
Description
Unit
Quantity
MATERIALS :0.5 metre dia. each = 10x22/7x0.5=15.71m
Area= 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
= 2.15 sqm.
0328
Insulating board
sqm
2.15
9999
Carriage
L.S.
3.38
9999
NailsL.S.
5.33
LABOUR:
0111
Carpenter 1st class
Day
0.49
0114
Beldar
Day
0.39
9999
Scaffolding
L.S.
6.11
9999
Sundries
L.S.
6.11
0111
Carpenter 1st class
Day
2.50
0114
Beldar
Day
2.50
9999
Scaffolding
L.S.
10.79
Add water charges @ 1% on

Rate

360.00
1.49
1.49
301.00
247.00
1.49
1.49
301.00
247.00
1.49
Total:
2435.08

Add C.P & OH @15% on

2459.43
Cost for 15.71 m
Rate per One Metre:
Rate as per DSR-12:

Rs 180.03
Rs 180.05

Item Code: 12.27.4.1

Extra for Circular cutting and waste in ceiling with Flame retardent face insulating board 12 mm thick
Details of Cost for : 15.71 m
Code
Description
Unit
Quantity
MATERIALS :0.5 metre dia. each = 10x22/7x0.5=15.71m
Area= 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
= 2.15 sqm.
0336
Insulating board
sqm
2.15
9999
Carriage
L.S.
3.38
9999
NailsL.S.
5.33
LABOUR:
0111
Carpenter 1st class
Day
0.49
0114
Beldar
Day
0.39
9999
Scaffolding
L.S.
6.11
9999
Sundries
L.S.
6.11
0111
Carpenter 1 st class
Day
2.50
0114
Beldar
Day
2.50
9999
Scaffolding
L.S.
10.79

DSR-12

Rate

315.00
1.49
1.49
301.00
247.00
1.49
1.49
301.00
247.00
1.49

Page 473 of 2298

Add water charges @ 1% on

Total:
2338.33

Add C.P & OH @15% on

2361.71
Cost for 15.71 m
Rate per One Metre:
Rate as per DSR-12:

Rs 172.88
Rs 172.90

Item Code: 12.27.5.1

Extra for Circular cutting and waste in ceiling with Standard quality hard board sheet 3 mm thick
Details of Cost for : 15.71 m
Code
Description
Unit
Quantity
MATERIALS :0.5 metre dia. each = 10x22/7x0.5= 15.71m
Area= 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
= 2.15 sqm.
0994
Insulating board
sqm
2.15
9999
Carriage
L.S.
2.73
9999
NailsL.S.
5.33
LABOUR:
0111
Carpenter 1 st class
Day
0.49
0114
Beldar
Day
0.39
9999
Scaffolding
L.S.
6.11
9999
Sundries
L.S.
6.11
0111
Carpenter 1st class
Day
2.50
0114
Beldar
Day
2.50
9999
Scaffolding
L.S.
10.79
Add water charges @ 1% on

Rate

110.00
1.49
1.49
301.00
247.00
1.49
1.49
301.00
247.00
1.49
Total:
1896.61

Add C.P & OH @15% on

1915.58
Cost for 15.71 m
Rate per One Metre:
Rate as per DSR-12:

Rs 140.22
Rs 140.20

Item Code: 12.27.5.2

Extra for Circular cutting and waste in ceiling with Standard quality hard board sheet 4.5 mm thick
Details of Cost for : 15.71 m
Code
Description
Unit
Quantity
MATERIALS :0.5 metre dia. each = 10x22/7x0.5=15.71m
Area= 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
= 2.15 sqm.
0996
Insulating board
sqm
2.15
9999
Carriage
L.S.
2.86
9999
NailsL.S.
5.33
LABOUR:
0111
Carpenter 1 st class
Day
0.49
0114
Beldar
Day
0.39
9999
Scaffolding
L.S.
6.11
9999
Sundries
L.S.
6.11
0111
Carpenter 1 st class
Day
2.50
0114
Beldar
Day
2.50
9999
Scaffolding
L.S.
10.79

DSR-12

Rate

130.00
1.49
1.49
301.00
247.00
1.49
1.49
301.00
247.00
1.49

Page 474 of 2298

Add water charges @ 1% on

Total:
1939.80

Add C.P & OH @15% on

1959.20
Cost for 15.71 m
Rate per One Metre:
Rate as per DSR-12:

Rs 143.42
Rs 143.40

Item Code: 12.28

Extra for P/F ceiling to curved surfaces in narrow widths
Code
0111
0112
0114

Description
LABOUR:
Carpenter 1 st class
Carpenter 2nd class
Beldar

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
Day

1.00
1.00
2.00

Add water charges @ 1% on

Rate
301.00
273.00
247.00
Total:
1068.00

Add C.P & OH @15% on

1078.68
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 124.05
Rs 124.05

Item Code: 12.31.1

Providing 10 mm thick POP (gypsum anhydrous) ceiling - height of 5m above floor level - excluding frame work : Flat surfaces

Code

1196
2204
1219

Details of Cost for : 10.00 Sqm

Unit
Quantity

MATERIALS:
Wooden strips of 1 st class kail wood
72x40x0.25x0.06 = 43.20 cudm. +
Add 10% wastage = 4.32 cudm.
= 47.52 cudm or 0.0475cum
First class kail wood in planks
cum
Carraige of Timber
cum
Wire nails
kilog
(Required for fixing the laths to frame) work including
breakage and wastage of nails
Rabbit wire mesh required for reinforcement
=2.5x4 = 10.00sqm.+ 2% wastage
=10.20sqm

1220

Wire mesh( rabbit)

Plaster of paris - required :
2.5x4.0x10x1121/1000= 112.10 kg
Add for plaster of paris joining into the side of laths
2.5x4.0x4.0032x1121 = 44.87 kg.
= 156.97+ 40% wastage
= 219.76 kg

sqm

0869
2308
9999

Plaster of paris
Carraige of Plaster of paris
Carriage of wiremesh and nails etc.,
LABOUR:
Carpenter I class

kilog
tonne
L.S.

0111

DSR-12

Description

Day

Rate

0.04752
0.0475
0.75

30000.00
100.11
52.00

10.20

45.00

219.76
0.22
2.73

4.00
77.67
1.49

1.60

301.00

Page 475 of 2298

0114

Beldar
For doing plaster of paris over wooden strips

Day

1.60

247.00

0122
0114
0101
9999

Mason (Special)
Beldar
Bhisthi
Scaffolding

Day
Day
Day

3.23
3.23
0.54

301.00
247.00
260.00

9999

Sundries

L.S.
L.S.

83.98
53.82

1.49
1.49
Total:
5821.12

Add water charges @ 1% on

Add C.P & OH @15% on

5879.33
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 676.12
Rs 676.15

Item Code: 12.31.2

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling :- Curved surfaces.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 4.00x2.5=10sqm.
MATERIALS :Wooden strips of 1st class kail wood
72x40x0.25x0.06 = 43.20 cudm. +
Add 10% wastage = 4.32 cudm.
= 47.52
1196
Kail wood
cum
0.04752
30000.00
2204
Carriage of timber
cum
0.0475
100.11
1219
Nail required for fixing the laths to frame work including kilog
0.75
52.00
breakage and wastage of nails
Rabbit wire mesh required for reinforcement
=2.5x4 = 10.00sqm.+
Add 2% wastage = 0.20 Sqm.
= 10.2 sqm.
1220
Rabbit wire mesh
sqm
10.20
45.00
Plaster of paris 2.5x4.0x10x1121/1000= 112.10 kg.
Add for plaster of paris joining into the side of the laths2.5x4.0x4.0032x1121 = 44.87 kg.
= 156.97+
Add 40% wastage = 62.79
= 219.76
0869
Plaster of Paris
kilog
219.76
4.00
2308
Carriage of Plaster of Paris
tonne
0.22
77.67
9999
Carriage of wiremesh and nails etc.
L.S.
2.73
1.49
LABOUR:
0111
Carpenter Ist class
Day
1.60
301.00
0114
Beldar
Day
1.60
247.00
0122
Mason
Day
3.23
301.00
0114
Beldar
Day
3.23
247.00
0101
Bhisti
Day
0.54
260.00
9999
Scaffolding
L.S.
83.98
1.49
9999
Sundries
L.S.
53.82
1.49
0111
Carpenter Ist class
Day
0.50
301.00
0122
Mason
Day
1.00
301.00
0114
Beldar
Day
1.50
247.00
Total:

DSR-12

Page 476 of 2298

Add water charges @ 1% on

6643.12

Add C.P & OH @15% on

6709.55
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 771.60
Rs 771.60

Item Code: 12.32

Extra for any sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
0869
Plaster of Paris
kilog
109.88
2308
Carriage of Plaster of Paris
tonne
0.11
LABOUR:
0122
Mason
Day
2.00
0114
Beldar
Day
2.00
0101
Bhisti
Day
0.25
9999
Scaffolding and Sundries
L.S.
13.52
Add water charges @ 1% on

Rate
4.00
77.67
301.00
247.00
260.00
1.49
Total:
1629.20

Add C.P & OH @15% on

1645.49
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 189.23
Rs 189.25

Item Code: 12.33

Extra for providing plaster of Paris (Gypsum anhydrous) ceil- ing above 5 m height from floor level
Details of Cost for : 10.00 units
Code
Description
Unit
Quantity
Details of cost for l0sqm/metre height
9999
Scaffolding
L.S.
13.52
LABOUR:
0122
Mason
Day
1.00
0114
Beldar
Day
1.00
0101
Bhisti
Day
0.25
Add water charges @ 1% on

Rate
1.49
301.00
247.00
260.00
Total:
633.14

Add C.P & OH @15% on

639.47
Cost for 10.00 units
Rate per Units:
Rate as per DSR-12:

Rs 73.54
Rs 73.55

Item Code: 12.34

P/F thermal insulation ceiling with resin bonded fiber glass wool density 24 Kg/m3, 50 mm thick
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Area for 10.00sqm. (Finished surface) =
10.00sqm.+
Add 10% for overlappings & wastage =
1.00sqm.
= 11.00sqm.
7232
Resin Bonded Glass wool 24 kg/cum 50 mm thick
sqm
11.00

DSR-12

Rate

204.00

Page 477 of 2298

9999
9999
0111
0114

Sundries including GI wire 20 SWG and Virgin polythene bags

200 gram
GI chiken mesh 12.5mm x 24 SWG
LABOUR:
Carpenter 1st class
Beldar

L.S.

104.00

1.49

L.S.

351.00

1.49

Day
Day

1.00
2.00

301.00
247.00
Total:
3716.95

Add water charges @ 1% on

Add C.P & OH @15% on

3754.12
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 431.72
Rs 431.70

Item Code: 12.35

P/F thermal insulation with resin bonded fiber glass wool Density 16Kg/m3 50mm thick
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Area for 10.00sqm. (Finished surface) =
10.00sqm.+
Add 10% for overlappings & wastage = 1.00sqm.
= 11.00sqm.
7231
Resin Bonded Glass wool 16 kg/cum 50 mm thick
sqm
11.00
9999
Sundries including GI wire 20 SWG and Virgin polythene bags L.S.
52.00
200 gram
LABOUR:
0111
Carpenter 1st class
Day
0.50
0114
Beldar
Day
0.50
Add water charges @ 1% on

Rate

145.00
1.49

301.00
247.00
Total:
1946.48

Add C.P & OH @15% on

1965.94
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 226.08
Rs 226.10

Item Code: 12.36.1

Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive: With Type N-Normal 50 mm thick.

Code

7090
0314
9999
0111
0114

Description
Cost of materials :
Expanded Polystyrens lx10=10.00sqm. +
Add wastage 10%= 1.00sqm.
= 11.00sqm.
Expanded polystyrene type N- Normal
Adhesive Bitumen hot sealing compound : grade A
Sundries
LABOUR:
Carpenter 1st class
Beldar

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

sqm
kilog
L.S.

11.00
0.25
13.00

130.00
26.00
1.49

Day
Day

0.50
0.50

301.00
247.00
Total:
1729.87

Add water charges @ 1% on

Add C.P & OH @15% on

1747.17
Cost for 10.00 Sqm

DSR-12

Page 478 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 200.93
Rs 200.90

Item Code: 12.36.2

Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive: With type SE- self Extinguishing type 50 mm
thick.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
Cost of materials :
Expanded Polystyrens lx10=10.00sqm. +
Add wastage 10% = 1.00sqm.
= 11.00sqm.
7091
Expanded polystyrene type - SE
sqm
11.00
155.00
0314
Adhesive bitumen grade A
kilog
0.25
26.00
9999
Sundries
L.S.
13.00
1.49
LABOUR:
0111
Carpenter 1 st class
Day
0.50
301.00
0114
Beldar
Day
0.50
247.00
Total:
Add water charges @ 1% on
2004.87
Add C.P & OH @15% on
2024.92
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 232.87
Rs 232.85

Item Code: 12.37.1

P?F 100mm dia rain water spout SW spout
Code

3004
9999
9999
0124
0114
9999

Description
Details of cost for 10 stone ware spout of 60cm long
MATERIALS :Stone ware spouts 100 mm dia 60 cm long
Carriage
Mortar
Labour for fixing and placing in position
Mason 2nd class
Beldar
Sundries

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

each
L.S.
L.S.

10.00
13.52
13.52

33.00
1.49
1.49

Day
Day
L.S.

0.40
0.40
5.33

273.00
247.00
1.49
Total:
586.22

Add water charges @ 1% on

Add C.P & OH @15% on

592.08
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 68.09
Rs 68.10

Item Code: 12.38.1

P/FM.S. holder bat clamps...: 100 mm diameter
Code
1331
9999

DSR-12

Description
MATERIALS:
MS holder bat clamps - For 100mm pipe
Sundries

Details of Cost for : 5.00 Nos

Unit
Quantity
each
L.S.

5.00
7.15

Rate
17.00
1.49

Page 479 of 2298

9999
0116
0124
0114
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0128
9999
9999

C.C. block 5x0.1x0.1x0.1 = 0.005 cum

Carriage of bat clamps
Fitter grade-I
Mason II class
Beldar
Stone aggregate 20mm
Stone aggregate 10mm
Carriage of 20mm aggregate
Coarse sand
Carriage of coarse sand
Cement
Carriage of cement
LABOUR:
Beldar
Coolie
Bhisthi
Mason I class
Mason II class
Mate
Hire charges of machine etc.
Sundries

L.S.
Day
Day
Day
cum
cum
cum
cum
cum
tonne
tonne

2.47
0.125
0.75
0.50
0.0033
0.0011
0.0044
0.0022
0.0022
0.0016
0.0016

1.49
301.00
273.00
247.00
1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87

Day
Day
Day
Day
Day
Day
L.S.
L.S.

0.0045
0.0032
0.0014
0.0003
0.0003
0.0002
0.26
0.13

247.00
247.00
260.00
301.00
273.00
260.00
1.49
1.49
Total:
484.06

Add water charges @ 1% on

Add C.P & OH @15% on

488.90
Cost for 5.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 112.45
Rs 112.50

Item Code: 12.38.2

P/FM.S. holder bat clamps...: 150 mm diameter
Code
0886
9999
9999
0116
0124
0114
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0128

DSR-12

Description
MATERIALS:
MS holdar bat clamps for sand cast iron or cast iron pipes 150
mm dia
C.C. block 5x0.1x0.1x0.1 = 0.005 cum
Sundries
Carriage of bat clamps
LABOUR:
Fitter grade-I
Mason II class
Beldar
MATERIALS:
Stone aggregate 20mm
Stone aggregate 10mm
Carriage of 20mm aggregate
Coarse sand
Carriage of coarse sand
Cement
Carriage of cement
LABOUR:
Beldar
Coolie
Bhisthi
Mason I class
Mason II class
Mate

Details of Cost for : 5.00 Nos

Unit
Quantity

Rate

each

5.00

25.00

L.S.

7.15

1.49

L.S.

2.47

1.49

Day
Day
Day

0.125
0.75
0.50

301.00
273.00
247.00

cum
cum
cum
cum
cum
tonne
tonne

0.0033
0.0011
0.0044
0.0022
0.0022
0.0016
0.0016

1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87

Day
Day
Day
Day
Day
Day

0.0045
0.0032
0.0014
0.0003
0.0003
0.0002

247.00
247.00
260.00
301.00
273.00
260.00

Page 480 of 2298

9999
9999

Hire charges of machine etc.

Sundries

L.S.
L.S.

0.26
0.13

Add water charges @ 1% on

1.49
1.49
Total:
524.06

Add C.P & OH @15% on

529.30
Cost for 5.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 121.74
Rs 121.80

Item Code: 12.39.1

Providing lead caulked joints to SCI RWP and fittings: 100 mm dia. pipe.
Code
0865
1001
9999
9999
0116
0117
0114

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS:
Pig lead
Spunyarn
Kerosene oil fuel and sundries
Carriage of materials
LABOUR:
Fitter
Assistant fitter
Beldar

Rate

kilog
kilog
L.S.
L.S.

0.98
0.11
13.52
1.43

90.00
40.00
1.49
1.49

Day
Day
Day

0.06
0.06
0.12

301.00
273.00
247.00
Total:
178.95

Add water charges @ 1% on

Add C.P & OH @15% on

180.74
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 207.85
Rs 207.85

Item Code: 12.39.2

Providing lead caulked joints to SCI RWP and fittings: 150 dia. pipe.
Code
0865
1001
9999
9999
0116
0117
0114

Description
MATERIALS:
Pig lead
Spun yarn
Kerosene oil fuel and sundries
Carriage of materials
LABOUR:
Fitter
Assistasnt fitter
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

kilog
kilog
L.S.
L.S.

1.48
0.17
13.52
2.73

90.00
40.00
1.49
1.49

Day
Day
Day

0.08
0.08
0.15

301.00
273.00
247.00
Total:
247.18

Add water charges @ 1% on

Add C.P & OH @15% on

249.65
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 287.10
Rs 287.10

Item Code: 12.40.1.1

P/F/E SCI accessories for RWP Sand cast iron plain shoes : 150 mm diameter

DSR-12

Page 481 of 2298

Code
0966
9999

Details of Cost for : 1.00 No.

Unit
Quantity

Description
Details of cost for one shoe
150 mm sand cast iron plain shoe
Carriage, fixing and mortar

each
L.S.

1.00
17.55

Add water charges @ 1% on

Rate
325.00
1.49
Total:
351.15

Add C.P & OH @15% on

354.66
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 407.86
Rs 407.85

Item Code: 12.41.1

P/F UVC Rigid PVC rain water pipes - Single socket pipes 75 mm diametre.
Code
7188
7190
9999
9999
0116
0114
0100
9999

Details of Cost for : 6.00 m

Unit
Quantity

Description
MATERIALS:
Cost of 6.00 metres pipe
Seal rings
Carriage of materials
Adhesive, and sundries etc.
LABOURFitter
Beldar
Bandhani
Scaffolding etc.

Rate

metre
nos
L.S.
L.S.

6.00
1.00
13.52
6.76

67.00
16.00
1.49
1.49

Day
Day
Day
L.S.

0.19
0.37
0.08
18.59

301.00
247.00
260.00
1.49
Total:
645.29

Add water charges @ 1% on

Add C.P & OH @15% on

651.74
Cost for 6.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 124.92
Rs 124.90

Item Code: 12.41.2

P/F UPVC rain water pipes : Single socketed pipes. 110 mm diameter
Code
7189
7191
9999
9999

0116
0114
0100
9999

Description

Details of Cost for : 6.00 m

Unit
Quantity

MATERIALS:
UP_Rigid PVC pipe - (w.p. 4 kgf/sqcm) - 110mm dia single metre
socket
Seal ring for 110mm dia pipe
nos
Carriage of materials
L.S.
Adhesive, and sundries etc.
L.S.
LABOUR:
Fitter grade-I
Day
Beldar
Day
Bandhani
Day
Scaffolding etc.
L.S.

6.00

129.00

1.00

20.00

17.55

1.49

8.06

1.49

0.23
0.45
0.11

301.00
247.00
260.00

18.59

1.49
Total:
1068.84

Add water charges @ 1% on

DSR-12

Rate

Page 482 of 2298

Add C.P & OH @15% on

1079.53
Cost for 6.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 206.91
Rs 206.90

Item Code: 12.42.1.1

P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Coupler : 75 mm.

Code
7192
7190
9999
9999

Description
MATERIALS:
Cost of coupler
Seal rings
Adhesive, and sundries etc.
LABOURCarriage and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each
nos
L.S.

1.00
2.00
2.73

34.00
16.00
1.49

L.S.

9.36

1.49
Total:
84.02

Add water charges @ 1% on

Add C.P & OH @15% on

84.86
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 97.59
Rs 97.60

Item Code: 12.42.1.2

P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Coupler : 110 mm.

Code
7193
7191
9999
9999

Description
Details of cost for 1 coupler
Cost of coupler
Seal rings
Adhesive, and sundries etc.
Carriage and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
nos
L.S.
L.S.

1.00
2.00
2.73
10.79

Add water charges @ 1% on

Rate
52.00
20.00
1.49
1.49
Total:
112.15

Add C.P & OH @15% on

113.27
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 130.26
Rs 130.25

Item Code: 12.42.2.1

P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Single pushfit coupler : 75
mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for 1 coupler
7194
Cost of coupler
each
1.00
50.00
7190
Seal rings
nos
2.00
16.00
9999
Adhesive, and sundries etc.
L.S.
2.73
1.49
9999
Carriage and fixing charges
L.S.
9.36
1.49
Total:
Add water charges @ 1% on
100.02

DSR-12

Page 483 of 2298

Add C.P & OH @15% on

101.02
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 116.17
Rs 116.15

Item Code: 12.42.2.2

P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Single pushfit coupler :
110 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for 1 coupler
7195
Cost of coupler
each
1.00
81.00
7191
Seal rings
nos
2.00
20.00
9999
Adhesive, and sundries etc.
L.S.
2.73
1.49
9999
Carriage and fixing charges
L.S.
10.79
1.49
Total:
Add water charges @ 1% on
141.15
Add C.P & OH @15% on
142.56
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 163.94
Rs 163.95

Item Code: 12.42.3.1

P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Single tee with door: 75 x
75 x 75 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS
7198
75x75x75 mm single equal tee (with door) including cost of each
1.00
115.00
bolts and nuts
7190
Seal rings
nos
3.00
16.00
9999
Adhesive, Carriage of material rubber washer etc. including L.S.
10.76
1.49
fixing charges
Total:
Add water charges @ 1% on
179.03
Add C.P & OH @15% on
180.82
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 207.94
Rs 207.95

Item Code: 12.42.3.2

P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Single tee with door: 110 x
110 x 110 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS
7199
110x110x110 mm single equal tee (with door) including cost each
1.00
180.00
of bolts and nuts
7191
Seal rings
nos
3.00
20.00
9999
Adhesive, Carriage of material rubber washer etc. including L.S.
13.47
1.49
fixing charges

DSR-12

Page 484 of 2298

Add water charges @ 1% on

Total:
260.07

Add C.P & OH @15% on

262.67
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 302.07
Rs 302.05

Item Code: 12.42.4.1

P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Single tee without door :
75 x 75 x 75 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS
7196
75x75x75 mm single equal tee (without door) including cost each
1.00
95.00
of bolts and nuts
7190
Seal rings
nos
3.00
16.00
9999
Adhesive, Carriage of material rubber washer etc. including L.S.
10.76
1.49
fixing charges
Total:
Add water charges @ 1% on
159.03
Add C.P & OH @15% on
160.62
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 184.71
Rs 184.70

Item Code: 12.42.4.2

P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Single tee without door :
110 x 110 x 110 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS
7197
110x110x110 mm single equal tee (without door) including each
1.00
128.00
cost of bolts and nuts
7191
Seal rings
nos
3.00
20.00
9999
Adhesive, Carriage of material rubber washer etc. including L.S.
13.47
1.49
fixing charges
Total:
Add water charges @ 1% on
208.07
Add C.P & OH @15% on
210.15
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 241.67
Rs 241.65

Item Code: 12.42.5.1

P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Bend 87.5 degree: 75 mm
bend.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
7208
Cost of bend
each
1.00
56.00
7190
Seal rings
nos
1.00
16.00
9999
Adhesive, and sundries etc.
L.S.
2.73
1.49

DSR-12

Page 485 of 2298

9999

Carriage and fixing charges

L.S.

9.36

Add water charges @ 1% on

1.49
Total:
90.02

Add C.P & OH @15% on

90.92
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 104.56
Rs 104.55

Item Code: 12.42.5.2

P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Bend 87.5 degree: 110 mm
bend.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
7209
Cost of bend
each
1.00
95.00
7191
Seal rings
nos
1.00
20.00
9999
Adhesive, and sundries etc.
L.S.
2.73
1.49
9999
Carriage and fixing charges
L.S.
10.79
1.49
Total:
Add water charges @ 1% on
135.15
Add C.P & OH @15% on
136.50
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 156.98
Rs 156.95

Item Code: 12.42.6.1

P/F on wall face unplasticised PVC moulded fittings for rain water pipes including jointing with seal ring : Shoe plain : 75 mm dia.

Code
7212
7190
9999
9999

Description
Details of cost for 1 shoe
Cost of shoe
Seal rings
Adhesive, and sundries etc.
Carriage and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
nos
L.S.
L.S.

1.00
1.00
2.73
9.36

Add water charges @ 1% on

Rate
107.00
16.00
1.49
1.49
Total:
141.02

Add C.P & OH @15% on

142.43
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 163.79
Rs 163.80

Item Code: 12.42.6.2

P/F UPVC moulded fittings/ accessories for UPVC rain water pipes- Shoe (Plain) 110 mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
7213
UPVC - Plain Shoe - 110mm
each
1.00
7191
Seal ring for 110mm dia pipe
nos
1.00
9999
Adhesive, and sundries etc.
L.S.
2.73
9999
Carriage and fixing charges
L.S.
10.79

DSR-12

Rate
207.00
20.00
1.49
1.49

Page 486 of 2298

Add water charges @ 1% on

Total:
247.15

Add C.P & OH @15% on

249.62
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 287.06
Rs 287.05

Item Code: 12.43.1

P/F unplasticised P.V.C pipes clips design to unplasticised P.V.C rain water pipes and fixing in C.M 1 : 4 coarse sand : For 75 mm dia.
pipes .
Details of Cost for : 5.00 Nos
Code
Description
Unit
Quantity
Rate
MATERIALS
7214
U-PVC pipe clips
each
5.00
16.00
9999
Carriage of U-PVC pipe clips
L.S.
2.47
1.49
0870
Hardwood plug 50x50x50
each
10.00
8.00
LABOUR :0116
Fitter
Day
0.125
301.00
0124
Mason 2nd class
Day
0.75
273.00
0114
Beldar
Day
0.50
247.00
9999
Sundries
L.S.
7.15
1.49
9999
Sundries
L.S.
0.91
1.49
9999
Sundries cement mortar 1:4(1 Cement: 4
L.S.
3.90
1.49
Coarse sand)
Total:
Add water charges @ 1% on
547.38
Add C.P & OH @15% on
552.85
Cost for 5.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 127.16
Rs 127.15

Item Code: 12.43.2

P/F UPVC pipe clips to UPVC rain water pipes : 110 mm
Code
7215
9999
0870
0116
0124
0114
9999
9999
9999

Details of Cost for : 5.00 Nos

Unit
Quantity

Description
MATERIALS
UPVC pipe clip 110 mm bend
Carriage of U-PVC pipe clips
Hardwood plug 50x50x50
LABOUR :Fitter
Mason 2nd class
Beldar
Sundries
Sundries
Sundries cement mortar 1:4(1 Cement: 4 Coarse sand)

Rate

each
L.S.
each

5.00
2.47
10.00

31.00
1.49
8.00

Day
Day
Day
L.S.
L.S.
L.S.

0.125
0.75
0.50
7.15
0.91
3.90

301.00
273.00
247.00
1.49
1.49
1.49
Total:
622.38

Add water charges @ 1% on

Add C.P & OH @15% on

628.60
Cost for 5.00 Nos
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 144.58
Rs 144.60

Page 487 of 2298

Item Code: 12.44

P/F to the inlet mouth of rain water pipe cast iron grating 15 cm diametre.
Code

7187
9999

Description
Details of cost for 1 grating
MATERIALS
150 mm cast iron grating for rain water pipe
Carriage of material and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity

each
L.S.

1.00
4.16

Add water charges @ 1% on

Rate

22.00
1.49
Total:
28.20

Add C.P & OH @15% on

28.48
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 32.75
Rs 32.75

Item Code: 12.45.1

P/F at all height false ceil- ing of i/c P/F of frame work made of special sections power pressed from M.S. sheet and galvanised in
accordance with zinc coating 600 asper IS:277: 12.5 mm thick tapered edge gypsum board conforming to IS: 2095, Part-I.

Code

7009
7010
7011
7012
7013
7014
1022
7015
7020
7016
7017
7018
7021
7388
9999
9999
0112
0114
0131

Details of Cost for : 103.68 Sqm

Description
Unit
Quantity
Details of cost for 10.8x9.6m = 103.68sqm.
MATERIALS
Gypsum board 12.5mm thick = 103.68 sqm.+
Add wastage @ 5% = 5.18sqm.
= 108.86 sqm.
Gypsum board
sqm
108.86
Ceiling sections
metre
238.14
Perimetre channel
metre
41.84
Intermediate channel
metre
90.72
Strap hanger (Ceiling angle)
metre
10.80
Connecting clips
each
189.00
Nuts and bolts 6 mm dia (25mm)
10 No
216.00
Soffit cleat
each
72.00
Drive all screws 25 mm long
100 N
1000.00
Joint filler
kilog
22.81
Joint finisher
kilog
34.21
Joint tape
roll
1.27
Primer for two coats
litre
18.66
Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each
72.00
bolt
Sundries like rawl plug scaffolding etc
L.S.
807.30
Carriage of material etc.
L.S.
447.20
LABOUR :Carpenter 2nd class
Day
31.104
Beldar
Day
31.104
Painter
Day
10.368
Add water charges @ 1% on

Rate

160.00
39.00
27.00
42.00
19.00
6.20
20.00
4.00
56.00
22.00
24.00
140.00
85.00
48.00
1.49
1.49
273.00
247.00
273.00
Total:
61718.49

Add C.P & OH @15% on

62335.67
Cost for 103.68 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 691.42
Rs 691.40

Page 488 of 2298

Item Code: 12.45.2

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed
from M.S. sheets - 12.5 mm thick tapered edge gypsum plain board

Code

7030
7010
7011
7012
7013
7014
1022
7015
7020
7016
7017
7018
7021
7388
9999
9999
0112
0114
0131

Details of Cost for : 103.68 Sqm

Unit
Quantity

Description

MATERIALS:
Gypsum board 12.5 mm thick = 103.68 sqm +
Wastage @ 5% = 5.18 sqm
Total = 108.86 sqm
12.5 mm thick tapered edge gypsum fire resistant board
Sqm
Galvanised Steel celling section (size 80x26x0.50 mm)
metre
Galvanised Steel perimetre Channel (Size 20x27x30x0.50 mm) metre
Galvanised Steel intermediate Channel (Size 15x45x15x0.90
mm)
Galvanised Steel angle hanger (Celling angle) (Size 25x10x0.50
mm)
Galvanised Steel connecting clips (2.64 mm dia and 230 mm
long GI wire
Galvanised steel bolts & nuts 6 mm dia and 25 mm long round
head with slots
Galvanised Steel soffit cleat (Size 27x37x25x0.60 mm)
All drive screws ( for gypsum board)
Joint filler
Joint finisher
Joint tape roll
Primer ( for gypsum board)
Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia
bolt
Sundries like rawl plug, scaffolding etc
Carriage of material
LABOUR:
Carpenter 2nd class
Beldar
Painter

Rate

108.86
238.14
41.84

237.00
39.00
27.00

metre

90.72

42.00

metre

10.80

19.00

each

189.00

6.20

10 No

216.00

20.00

each
100 N
kilog
kilog
roll
litre
each

72.00
1000.00
22.81
34.21
1.27
18.66
72.00

4.00
56.00
22.00
24.00
140.00
85.00
48.00

L.S.
L.S.

807.30
447.20

1.49
1.49

Day
Day
Day

31.104
31.104
10.37

273.00
247.00
273.00
Total:
70101.26

Add water charges @ 1% on

Add C.P & OH @15% on

70802.27
Cost for 103.68 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 785.33
Rs 785.30

Item Code: 12.45.3

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed
from M.S. sheets - 12.5 mm thick tapered edge gypsum moisture resistant board

Code

7031

DSR-12

Description

Details of Cost for : 103.68 Sqm

Unit
Quantity

MATERIALS:
Gypsum board 12.5 mm thick = 103.68 sqm +
Wastage @ 5% = 5.18 sqm
Total = 108.86 sqm
12.5 mm thick tapered edge gypsum moisture resistant board Sqm

108.86

Rate

271.00

Page 489 of 2298

7010
7011

Galvanised Steel celling section (size 80x26x0.50 mm)

metre
Galvanised Steel perimetre Channel (Size 20x27x30x0.50 mm) metre

7012

Galvanised Steel intermediate Channel (Size 15x45x15x0.90

mm)
Galvanised Steel angle hanger (Celling angle) (Size 25x10x0.50
mm)
Galvanised Steel connecting clips (2.64 mm dia and 230 mm
long GI wire
Galvanised steel bolts & nuts 6 mm dia and 25 mm long round
head with slots
Galvanised Steel soffit cleat (Size 27x37x25x0.60 mm)
All drive screws ( for gypsum board)
Joint filler
Joint finisher
Joint tape roll
Primer ( for gypsum board)
Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia
bolt
Sundries like rawl plug, scaffolding etc
Carriage of material
LABOUR:
Carpenter 2nd class
Beldar
Painter

7013
7014
1022
7015
7020
7016
7017
7018
7021
7388
9999
9999
0112
0114
0131

238.14
41.84

39.00
27.00

metre

90.72

42.00

metre

10.80

19.00

each

189.00

6.20

10 No

216.00

20.00

each
100 N
kilog
kilog
roll
litre
each

72.00
1000.00
22.81
34.21
1.27
18.66
72.00

4.00
56.00
22.00
24.00
140.00
85.00
48.00

L.S.
L.S.

807.30
447.20

1.49
1.49

Day
Day
Day

31.104
31.104
10.368

273.00
247.00
273.00
Total:
73801.95

Add water charges @ 1% on

Add C.P & OH @15% on

74539.97
Cost for 103.68 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 826.78
Rs 826.80

Item Code: 12.45.4

P/F false ceiling including p/f of frame work made of special sections, power pressed from M.S. sheets - Fully Perforated Gypsum
Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area

Code

7028
7010
7011
7012
7013
7014
1022
7015
7020
7016

DSR-12

Description

Details of Cost for : 103.68 Sqm

Unit
Quantity

MATERIALS:
Gypsum board 12.5 mm thick = 103.68 sqm +
Wastage @ 5% = 5.18 sqm
Total = 108.86 sqm
12.5 mm thick Fully Perforated gypsum board
Sqm
Galvanised Steel celling section (size 80x26x0.50 mm)
metre
Galvanised Steel perimetre Channel (Size 20x27x30x0.50 mm) metre
Galvanised Steel intermediate Channel (Size 15x45x15x0.90
mm)
Galvanised Steel angle hanger (Celling angle) (Size 25x10x0.50
mm)
Galvanised Steel connecting clips (2.64 mm dia and 230 mm
long GI wire
Galvanised steel bolts & nuts 6 mm dia and 25 mm long round
head with slots
Galvanised Steel soffit cleat (Size 27x37x25x0.60 mm)
All drive screws ( for gypsum board)
Joint filler

Rate

108.86
238.14
41.84

927.00
39.00
27.00

metre

90.72

42.00

metre

10.80

19.00

each

189.00

6.20

10 No

216.00

20.00

each
100 N
kilog

72.00
1000.00
22.81

4.00
56.00
22.00

Page 490 of 2298

7017
7018
7021
7388
9999
9999
0112
0114
0131

Joint finisher
kilog
Joint tape roll
roll
Primer ( for gypsum board)
litre
Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each
bolt
Sundries like rawl plug, scaffolding etc
L.S.
Carriage of material
L.S.
LABOUR:
Carpenter 2nd class
Day
Beldar
Day
Painter
Day

34.21
1.27
18.66
72.00

24.00
140.00
85.00
48.00

807.30
447.20

1.49
1.49

31.104
31.104
10.368

273.00
247.00
273.00
Total:
145214.11

Add water charges @ 1% on

Add C.P & OH @15% on

146666.25
Cost for 103.68 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1626.80
Rs 1626.80

Item Code: 12.46

P/F to inlet mout of rain water pipe PTMT grating square (Silt) 150 mm Sqm with a height of 8 mm and weighing not less than 100
Grams(Prayagorequivalent).
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for 1 grating
MATERIALS
7857
P.T.M.T. Grating square slit 150mm
each
1.00
77.00
9999
Carriage of material and fixing charges
L.S.
4.16
1.49
Total:
Add water charges @ 1% on
83.20
Add C.P & OH @15% on
84.03
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 96.63
Rs 96.65

Item Code: 12.47.1

P/F UV stabilised fiber glass reinforced plastic sheet roofing upto any pitch i/c fixing J or L hooks, bolts & nuts 8 mm dia.: 2 mm
thick corrugated (2.5" or 4.2" or 6") or step-down (2"or3"or 6") as specified.

Code

8668
9999

1022

DSR-12

Details of Cost for : 184.518 Sqm

Description
Unit
Quantity
Rate
Details of cost for area of roof.
2x18.09x5.1 = 184.518 sqm.
MATERIALS:
UV stabilised 2 mm thick corrugated FRP sheet.
sqm
240.408
538.00
Carriage of sheet
L.S.
104.00
1.49
G.I.Seam bolts and nuts 60cm centre to centre zig-zag i.e.
30cm centre to centre straight
Breadth is 5.1 metre
No. of bolts in one lap 5.1/0.3 =17 nos.
2x26(laps)xl7 nos. = 884 nos.
Bolts and nuts
10 No
884.00
20.00
G.I.,J or L hooks 8mm dia.
(No. of purlins to be used 5 on either side)2x5x27
(No. of sheets)x23 nos. of bolts

Page 491 of 2298

1023
1207
1208
9999
9999
0130
0112
0114

in each sheet = 810 nos.

G.I., J or L hooks
Limpet washers (total of seam and J bolts)
884+810= 1694
Bitumen washers
Carriage of bolts and washers
Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar

10 No
100 N

810.00
1694.00

90.00
35.00

100 N
L.S.
L.S.

1694.00
26.91
53.82

25.00
1.49
1.49

1.30
15.50
15.50

301.00
273.00
247.00
Total:
148140.45

Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

149621.85
Cost for 184.518 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 932.51
Rs 932.50

Item Code: 12.47.2

P/F UV stabilised fiber glass reinforced plastic sheet roofing upto any pitch i/c fixing J or L hooks, bolts & nuts 8 mm dia.: 2 mm
thick flat.
Details of Cost for : 184.518 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for area of roof. 2x18.09x5.1 = 184.518 sqm.

8667
9999

1022

1023
1207
1208
9999
9999
0130
0112
0114

MATERIALS:
UV stabilised 2 mm thick plain FRP sheet
sqm
Carriage of sheet
L.S.
G.I.Seam bolts and nuts 60cm centre to centre zig-zag i.e.
30cm centre to centre straight
Breadth is 5.1 metre
No. of bolts in one lap 5.1/0.3 =17 nos.
2x26(laps)xl7 nos. = 884 nos.
Bolts and nuts
10 No
G.I.,J or L hooks 8mm dia.
(No. of purlins to be used 5 on either side)2x5x27
(No. of sheets)x23 nos. of bolts in each sheet = 810 nos.
G.I., J or L hooks
10 No
Limpet washers (total of seam and J bolts)
100 N
884+810= 1694
Bitumen washers
100 N
Carriage of bolts and washers
L.S.
Sundries
L.S.
LABOUR:
Mistry
Day
Carpenter 2nd class
Day
Beldar
Day

240.408
104.00

465.00
1.49

884.00

20.00

810.00
1694.00

90.00
35.00

1694.00
26.91
53.82

25.00
1.49
1.49

1.30
15.50
15.50

301.00
273.00
247.00
Total:
130590.67

Add water charges @ 1% on

Add C.P & OH @15% on

131896.58
Cost for 184.518 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 822.04
Rs 822.05

Page 492 of 2298

Item Code: 12.48

P/F pressed clay tile (Mangalore tile) 20 mm thick, approved pattern ceiling on steel frame.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
8670
Manglore tiles 20 mm thick.
each
160.00
2207
Carriage of tiles
1000
160.00
LABOUR
0123
Mason 1st class
Day
0.30
0114
Beldar
Day
1.56
9999
Sundries
L.S.
13.00
Add water charges @ 1% on

Rate
10.20
140.16
301.00
247.00
1.49
Total:
2149.42

Add C.P & OH @15% on

2170.91
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 249.66
Rs 249.65

Item Code: 12.49

P/L pressed clay tile ridge (Mangalore tile) 20mm thick of approved pattern ceiling over steel frame.
Details of Cost for : 3.60 m
Code
Description
Unit
Quantity
MATERIALS:
8669
Mangalore ridge tiles 20mm thick.
each
12.00
2207
Carraige of tiles
1000
12.00
LABOUR :
0123
Mason (brick layer) 1st class
Day
0.01
0114
Beldar
Day
0.15
9999
Sundries
L.S.
2.60
Add water charges @ 1% on

Rate
29.00
140.16
301.00
247.00
1.49
Total:
393.61

Add C.P & OH @15% on

397.55
Cost for 3.60 m
Rate per One Metre:
Rate as per DSR-12:

Rs 126.99
Rs 127.00

Item Code: 12.50

P/F precoated GI profile sheets 0.50 mm total coated thickness (TCT), in roofing ..
Details of Cost for : 216.14 Sqm
Code
Description
Unit
Quantity
MATERIALS:
Sheets used =20nos
20xl0.70mxl.06m=226.84sqm
Add 3% wastage = 6.81
= 233.65sqm.

DSR-12

8671
9999
1023
1208
1209
9999

Precoated galvanised iron prifile sheet 0.50 mm TCT

Carriage of sheets
G.I J or L hooks 8mm dia with nuts and bolts
GI washers
Bitumen washers
Carriage of bolts and nuts, washers etc.

9999

Sundries

sqm
L.S.
10 No
100 N
100 N
L.S.
L.S.

Rate

233.65
104.00
476.00
476.00
476.00

435.00
1.49
90.00
25.00
32.00

8.06
39.52

1.49
1.49

Page 493 of 2298

0130
0112
0114

Mistry
LABOUR:
Carpenter II class
Beldar

Day

2.34

301.00

Day
Day

9.34
9.34

273.00
247.00
Total:
111980.06

Add water charges @ 1% on

Add C.P & OH @15% on

113099.86
Cost for 216.14 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 601.76
Rs 601.75

Item Code: 12.51.1

P/F precoated galvanised steel sheet roofing acce- ssories: Ridges plain (500-600 mm).
Details of Cost for : 20.20 m
Code
Description
Unit
Quantity
MATERIAL:One piece plain ridges
Consider a shed of 20x10m (external dimensions at plinth).

8672
9999
9999
0130
0112
0114

Length of ridges 20.2 metre + 5% wastage = 23.11 metre.

MATERIALS:
Precoated galvanised steel plain ridges.
metre
Carriage (The ridge is to be fixed with the same hooks as the L.S.
Sheets)
Sundries
L.S.
LABOUR:
Mistry
Day
Carpenter 2nd class
Day
Beldar
Day

Rate

23.11
13.52

440.00
1.49

6.76

1.49

0.14
0.55
1.64

301.00
273.00
247.00
Total:
10795.98

Add water charges @ 1% on

Add C.P & OH @15% on

10903.94
Cost for 20.20 m
Rate per One Metre:
Rate as per DSR-12:

Rs 620.77
Rs 620.75

Item Code: 12.51.2

P/F precoated galvanised steel sheet roofing acce- ssories: Flashing/Aprons (upto600mm).
Details of Cost for : 20.20 m
Code
Description
Unit
Quantity
Details for shed of 20.2 metres completed length
MATERIALS:
8673
Precoated galvanised steel flashings/aprons. = 20.20 + 5% metre
23.11
wastage = 23.11 metre
9999
Carriage of appron pieces. (The appron pieces are to be fixed L.S.
3.25
with the same hooks as the s
9999
Sundries
L.S.
3.25
LABOUR:
0130
Mistry
Day
0.07
0112
Carpenter 2nd class
Day
0.28
0114
Beldar
Day
0.82
Add water charges @ 1% on

DSR-12

Rate

440.00
1.49
1.49
301.00
273.00
247.00
Total:
10478.13

Page 494 of 2298

Add C.P & OH @15% on

10582.91
Cost for 20.20 m
Rate per One Metre:
Rate as per DSR-12:

Rs 602.49
Rs 602.50

Item Code: 12.51.3

P/F precoated GS sheet roofing accessories 0.50 mm total coated thickness (TCT)... ..complete : North light curves.

Code
8675
1023
1209
1208
9999
9999
0130
0112
0114

Description
MATERIALS:
Precoated galvanised steel north light curves
(Qty : 20.20 + 5% wastage = 23.11 mtr)
G.I J or L hooks 8mm dia with nuts and bolts
Bitumen washers
GI washers
Carriage of hooks, nuts, washers and curves
Sundries
Mistry
LABOUR:
Carpenter II class
Beldar

Details of Cost for : 20.20 m

Unit
Quantity

Rate

metre

23.11

455.00

10 No
100 N
100 N
L.S.
L.S.
Day

40.00
40.00
40.00
9.88
6.24
0.10

90.00
32.00
25.00
1.49
1.49
301.00

0.30
1.00

273.00
247.00
Total:
11280.87

Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

11393.68
Cost for 20.20 m
Rate per One Metre:
Rate as per DSR-12:

Rs 648.65
Rs 648.65

Item Code: 12.51.4

P/F precoated galvanised steel sheet roofing acce- ssories: Barge board (upto 300 mm).
Details of Cost for : 8.23 m
Code
Description
Unit
Quantity
Completed length of barge boards = 8.23 + 5% wastage = 8.64
metre
MATERIALS:
8676
Precoated galvanised steel barge board.
metre
8.64
0222
Seam bolts and nuts 6 mm dia and 25 mm long
10 No
5.00
1211
G.I. plain washers for seam bolts.
100 N
10.00
1208
Bitumen washers
100 N
5.00
9999
Carriage of barge boards, bolts, nuts and washers
L.S.
9.36
9999
Sundries
L.S.
6.76
LABOUR:
0130
Mistry
Day
0.04
0112
Carpenter 2nd class
Day
0.06
0114
Beldar
Day
0.40
Add water charges @ 1% on

Rate

445.00
35.00
32.00
25.00
1.49
1.49
301.00
273.00
247.00
Total:
4017.99

Add C.P & OH @15% on

4058.17
Cost for 8.23 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 567.06
Rs 567.05

Page 495 of 2298

Item Code: 12.51.5

P/F precoated galvanised steel sheet roofing acce- ssories: Crimp curve.
Code

8677
1023
1209
1208
9999
9999
0130
0112
0114

Details of Cost for : 21.412 Sqm

Unit
Quantity

Description
Details of crimp curve 20.2 metres long
Area 20.20 x 1.06 =21.412 sqm
MATERIALS:
Precoated galvanised steel crimp curve
G.I. J or L hooks with nuts and bolts 8 mm dia
G.I plain washer thick
Bitumen washers
Carriage of hooks, nuts, washers and curves
Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar

sqm
10 No
100 N
100 N
L.S.
L.S.
Day
Day
Day

Rate

22.483
40.00
40.00
40.00
9.88
6.24

475.00
90.00
32.00
25.00
1.49
1.49

0.10
0.30
1.00

301.00
273.00
247.00
Total:
11445.25

Add water charges @ 1% on

Add C.P & OH @15% on

11559.70
Cost for 21.412 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 620.85
Rs 620.85

Item Code: 12.51.6

P/F precoated galvanised steel sheet roofing acce- ssories: Gutter (600mm overall grith).
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATRIAL
0.63mm thick with zinc coating not less than 275gm/sqm

8674
9999
1008
1022
1024
1210
1208
9999
9999
0102
0114
9999
0130
0102
0112
0114

DSR-12

Consider a length of 10.00m

Sheet used = 10x1.06m x 0.60 = 6.36 sqm. = 6.36 metre
Precoated galvanised steel gutter
Carriage of gutter
Flats upto 10 mm in thickness
Galvanised steel bolts and nuts 6 mm dia and 25 mm long
round head with slot
Galvanised steel bolts and nuts 10 mm dia and 125 mm long
G.I. plain washers thin
Bitumen washers
Carriage of G.I. seam bolts and
Sundries
LABOUR:
Blacksmith 1st class
Beldar
Sundries
Mistry
Blacksmith first class
Carpenter 2nd class
Beldar

Rate

metre
L.S.
quint
10 No

10.00
1.04
0.0749
20.00

455.00
1.49
4200.00
20.00

each

30.00

10.00

100 N
100 N
L.S.
L.S.

70.00
40.00
2.73
5.33

30.00
25.00
1.49
1.49

Day
Day
L.S.
Day
Day
Day
Day

0.50
0.50
12.61
0.28
0.84
0.62
1.68

Add water charges @ 1% on

301.00
247.00
1.49
301.00
301.00
273.00
247.00
Total:
6463.27

Add C.P & OH @15% on

6527.90

Page 496 of 2298

Cost for 10.00 m

Rate per One Metre:
Rate as per DSR-12:

Rs 750.71
Rs 750.70

Item Code: 12.52.1

P/L tiled false ceiling of size 595x595 mm metal grid of hot dipped galvanized steel sections.. GI Metal Ceiling Lay in plain Tegular
edge Global white color tiles of size 595x595 mm,

Code

Details of Cost for : 100.00 Sqm

Unit
Quantity

Description

Rate

MATERIALS:
Ceiling Area =100 Sqm
Add wastage @ 5% =0.05 Sqm
Total 100.05 Sqm
8599

Sqm

100.05

809.00

8611
8612
8613

G.I Metal Tile Lay-in plain Tegular edge global white color tiles
of size 595x595mm and 0.
Main T ceiling sections 24x38x0.3 mm (3 metre long)
Perimeter wall angle 21x21x0.3 mm (3 metre long)
Intermediate cross T-Section 24x25x0.30mm (1.2 mtrs long)

each
each
each

29.50
13.50
147.00

187.00
118.00
72.00

8614

Intermediate cross T-Section 24x25x0.30mm (0.6 mtrs long)

each

147.00

34.00

8615
8616
8617
7388

Hanger rod 4 mm thick

each
Adjustment clip
each
Soffit cleat
each
Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each
bolt
Sundries i.e scaffolding etc.,
L.S.
Carriage of materials
L.S.
LABOUR:
Carpenter 1st class
Day
Beldar
Day

72.00
72.00
72.00
72.00

7.00
6.00
3.00
48.00

187.95
89.28

1.49
1.49

28.00
23.00

301.00
247.00
Total:
122762.03

9999
9999
0111
0114

Add water charges @ 1% on

Add C.P & OH @15% on

123989.65
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1425.88
Rs 1425.90

Item Code: 12.52.2

P/L tiled false ceiling of size 595x595 mm metal grid of hot dipped galvanized steel sections.. GI Metal Ceiling Lay in plain Tegular
edge Global white color tiles of size 595x595 mm with 20% area perforations

Code

Description

Details of Cost for : 100.00 Sqm

Unit
Quantity

Rate

MATERIALS:
Ceiling Area =100 Sqm
Add wastage @ 5% =0.05 Sqm
Total 100.05 Sqm
8600
8611
8612

DSR-12

GI Metal Tile Lay-in Perforated Tegular edge global white Sqm

color tiles of Size 595x595 mm a
Main T ceiling sections 24x38x0.3 mm (3 metre long)
each
Perimeter wall angle 21x21x0.3 mm (3 metre long)
each

100.05

906.00

29.50
13.50

187.00
118.00

Page 497 of 2298

8613

Intermediate cross T-Section 24x25x0.30mm (1.2 mtrs long)

each

147.00

72.00

8614

Intermediate cross T-Section 24x25x0.30mm (0.6 mtrs long)

each

147.00

34.00

8615
8616
8617
7388

Hanger rod 4 mm thick

each
Adjustment clip
each
Soffit cleat
each
Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each
bolt
Sundries i.e scaffolding etc.,
L.S.
Carriage of materials
L.S.
LABOUR:
Carpenter 1st class
Day
Beldar
Day

72.00
72.00
72.00
72.00

7.00
6.00
3.00
48.00

187.95
89.28

1.49
1.49

28.00
23.00

301.00
247.00
Total:
132466.88

9999
9999
0111
0114

Add water charges @ 1% on

Add C.P & OH @15% on

133791.55
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1538.60
Rs 1538.60

Item Code: 12.52.3

P/F tiled false ceiling of size 595x595 mm metal grid of hot dipped galvanized steel sections.. 12.5 mm thick square edge PVC
Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard..

Code

Details of Cost for : 100.00 Sqm

Unit
Quantity

Description

Rate

MATERIALS:
Ceiling Area = 100 sqm
Add wastage @ 5% = 5 sqm
Total = 105.00 Sqm
8601

Sqm

105.00

468.00

each

29.50

187.00

8613

PVC Laminated Gypsum Tiles (Square edge) of Size 595x595

mm and 12.5 mm thick
Main T ceiling sections 24x38x0.3 mm (3 metre long)
(including 10% wastage)
Perimeter wall angle 21x21 mm (3 metre long)
(including 10% wastage)
Intermediate cross T-Section 24x25x0.3 mm (1.2 mtr long)

each
each

13.50
147.00

118.00
72.00

8614

Intermediate cross T-Section 24x25x0.3 mm (0.6 mtr. long)

each

147.00

34.00

8615
8616
8617
7388

Hanger rod 4 mm thick

each
Adjustment clip 85x30x0.8 mm
each
Soffit cleat (Size 27x37x25x1.60 mm)
each
Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each
bolt
Sundries i.e scaffoldings etc.,
L.S.
Carriage of material
L.S.
LABOUR:
Carpenter 1st class
Day
Beldar
Day

72.00
72.00
72.00
72.00

7.00
6.00
3.00
48.00

187.95
89.28

1.49
1.49

28.00
23.00

301.00
247.00
Total:
90961.58

8611
8612

9999
9999
0111
0114

Add water charges @ 1% on

Add C.P & OH @15% on

91871.20
Cost for 100.00 Sqm

DSR-12

Page 498 of 2298

Rate per One Sqm:

Rate as per DSR-12:
In DAR qty of 8601 wrongly taken as 100.05 instead of 105

Rs 1056.52
Rs 1029.60

Item Code: 12.52.4

P/F tiled false ceiling of size 595x595 mm metal grid of hot dipped galvanized steel sections.. 12.5 mm
Gypsum Board tile
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
MATERIALS:
Ceiling Area = 100 sqm
Add wastage @ 5% = 5 sqm
Total = 105.00 Sqm
(In DAR wrongly taken as 100.05)
8602
Gypsum Tiles Fully Perforated Square edge of Size 595x595 Sqm
105.00
mm and 12.5mm thick
8611
Main T ceiling sections 24x38x0.3 mm (3 metre long)
(including 10% wastage)
each
29.50
8612
Perimeter wall angle 21x21 mm (3 metre long)
(including 10% wastage)
each
13.50
8613
Intermediate cross T-Section 24x25x0.3 mm (1.2 mtr long)
each
147.00

thick fully Perforated

Rate

484.00

187.00
118.00
72.00

8614

Intermediate cross T-Section 24x25x0.3 mm (0.6 mtr. long)

each

147.00

34.00

8615
8616
8617
7388

Hanger rod 4 mm thick

each
Adjustment clip 85x30x0.8 mm
each
Soffit cleat (Size 27x37x25x1.60 mm)
each
Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each
bolt
Sundries i.e scaffoldings etc.,
L.S.
Carriage of material
L.S.
LABOUR:
Carpenter 1st class
Day
Beldar
Day

72.00
72.00
72.00
72.00

7.00
6.00
3.00
48.00

187.95
89.28

1.49
1.49

28.00
23.00

301.00
247.00
Total:
92641.58

9999
9999
0111
0114

Add water charges @ 1% on

Add C.P & OH @15% on

93568.00
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1076.03
Rs 1048.20

Item Code: 12.53

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles ..

Code

Description

Details of Cost for : 100.00 Sqm

Unit
Quantity

Rate

MATERIALS:
Ceiling Area = 100 sqm
Add wastage @ 5% = 5 sqm
Total = 105.00 Sqm
8589
8590

DSR-12

Calcium Silicate tegular edged celling tiles 595x595 mm and Sqm

15 mm thick
Galvanised Steel main Tee ceiling section Size 24 x 38 x 0.33 Nos
mm (3 metre long)

105.00

858.00

29.50

192.00

Page 499 of 2298

8591
8592
8593
8615
8616
7388
8617
8595
9999
9999
9999
0111
0114

Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40 mm

(3.00 metre long)
Galvanised Steel intermediate cross T section Size 24 x 25 x
0.33 mm (1.2 metre long)
Galvanised Steel intermediate cross T section Size 24 x 25 x
0.33 mm ( 0.6 metre long)
Hanger rod 4 mm thick
Adjustment clip 85x30x0.8 mm
Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia
bolt
Soffit cleat (Size 27x37x25x1.60 mm)
Wooden screws with plastic rawl plugs 35x8 mm
Sundries i.e scaffoldings etc.,
Carriage of material
Sundries
LABOUR:
Carpenter 1st class
Beldar

Nos

13.50

125.00

Nos

147.00

77.00

Nos

147.00

39.00

each
each
each

72.00
72.00
72.00

7.00
6.00
48.00

each
Nos
L.S.
L.S.
L.S.

72.00
100.00
498.65
237.48
310.70

3.00
0.55
1.49
1.49
1.49

Day
Day

28.00
23.00

301.00
247.00
Total:
134825.28

Add water charges @ 1% on

Add C.P & OH @15% on

136173.53
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1566.00
Rs 1566.00

Item Code: 12.54.1

P/FGI Clip in Metal Ceiling System of 600x600mm module - including 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre
painted steel ..GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600mm..

Code

Description

Details of Cost for : 100.00 Sqm

Unit
Quantity

Rate

MATERIALS:
Ceiling Area = 100 sqm
Add wastage @ 5% = 5 sqm
Total = 105.00 Sqm
8597
8604
8605
8606
8607
8608
8609
8610
8615
8616
8617
7388
9999
9999
0111
0114

DSR-12

GI Metal Tile Clip in Plain Beveled edge global white colour Sqm
tiles of size 600x600 mm and
Spring T-section 24x34x0.45 mm (3.00 meter long)
m
C Wall angle section 20x30x20x0.50 mm (3.00 meter long)
m

105.00

894.00

60.00
27.70

180.00
155.00

Main C Carrier Size 10x38x10x0.70 mm (3.00 meter long)

m
Spring T-connector
Nos.
C Carrier Connector
Nos.
C Suspension Clip
Nos.
Wire Coupling Clip
Nos.
Hanger rod 4 mm thick
each
Adjustment clip 85x30x0.8 mm
each
Soffit cleat (Size 27x37x25x1.60 mm)
each
Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each
bolt
Sundries i.e scaffoldings etc.,
L.S.
Carriage of material
L.S.
LABOUR:
Carpenter 1st class
Day
Beldar
Day

33.00
44.00
44.00
88.00
333.00
80.00
80.00
80.00
80.00

164.00
5.00
11.00
11.00
9.00
7.00
6.00
3.00
48.00

188.00
90.00

1.49
1.49

28.00
23.00

301.00
247.00
Total:

Page 500 of 2298

Add water charges @ 1% on

138687.72

Add C.P & OH @15% on

140074.60
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1610.86
Rs 1559.45

Item Code: 12.54.2

P/FGI Clip in Metal Ceiling System of 600x600mm module - including 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre
painted steel ..GI Metal Ceiling Clip in plain Beveled edge global white color tiles 600x600 - 0.5 mm thick with 25 mm height..

Code

Description

Details of Cost for : 100.00 Sqm

Unit
Quantity

Rate

MATERIALS:
Ceiling Area = 100 sqm
Add wastage @ 5% = 5 sqm
Total = 105.00 Sqm
8598
8604
8605
8606
8607
8608
8609
8610
8615
8616
8617
7388
9999
9999
0111
0114

GI Metal Tile Clip in Perforated Beveled edge global white Sqm

colour tiles of size 600x600 mm
Spring T-section 24x34x0.45 mm (3.00 meter long)
m
C Wall angle section 20x30x20x0.50 mm (3.00 meter long)
m

105.00

998.00

60.00
27.70

180.00
155.00

Main C Carrier Size 10x38x10x0.70 mm (3.00 meter long)

m
Spring T-connector
Nos.
C Carrier Connector
Nos.
C Suspension Clip
Nos.
Wire Coupling Clip
Nos.
Hanger rod 4 mm thick
each
Adjustment clip 85x30x0.8 mm
each
Soffit cleat (Size 27x37x25x1.60 mm)
each
Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia each
bolt
Sundries i.e scaffoldings etc.,
L.S.
Carriage of material
L.S.
LABOUR:
Carpenter 1st class
Day
Beldar
Day

33.00
44.00
44.00
88.00
333.00
80.00
80.00
80.00
80.00

164.00
5.00
11.00
11.00
9.00
7.00
6.00
3.00
48.00

188.00
90.00

1.49
1.49

28.00
23.00

301.00
247.00
Total:
149607.72

Add water charges @ 1% on

Add C.P & OH @15% on

151103.80
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1737.69
Rs 1680.30

Item Code: 12.55

P/F Heat Resistant Terrace Tiles (300 mm x 300mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial
emittance > 0.75
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
Qty of tiles = 10.00 sqm
Add 3% for wastage = 0.3 sqm
Total = 10.30 sqm

DSR-12

Page 501 of 2298

1204
03.009
0367
0368
2209
0875

0124
0115
0139
0101
0013
9999

Precast heat resistant terrace tiles (size 300x300 mm) and 20

mm thick
Cement mortar 1:4 (1 cement : 4 coarse sand).
Portland Cement
White Cement
Carraige of Cement
Red, chocolate, orange, buff or yellow (red oxide of iron) light
shade pigment
LABOUR:
Mason (brick layer) 2nd class
Coolie
Skilled Beldar (for floor rubbing etc.)
Bhisti
Machine for rubbing of floors
Sundries including carborandom stone etc.,

Sqm

10.30

482.00

Cum
tonne
tonne
tonne
kilog

0.224
0.044
0.044
0.088
3.08

3485.41
5000.00
12000.00
77.87
70.00

1.60
2.00
1.00
1.00
1.60
169.98

273.00
247.00
260.00
260.00
300.00
1.49
Total:
8899.85

Day
Day
Day
Day
Day
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

8988.85
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1033.72
Rs 1033.70

Item Code: 12.56

P/L roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming
to IS - 12432 Pt. III ,..
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
7050
PU Primer
Sqm
1.00
40.75
Area of PU spray = 1.00 sqm+
Wastage @ 10% = 0.10 sqm
Toatl = 10.10 sqm

7051
7052
9999
9999
7053
9999
9999
9999
9999
9999
9999

40 mm (average) PU spray having 40-45 kg/cum density

GI wire netting 3/4" x 24 G
Sundries
Polymerized mastic for all joints
400 G polythene sheet
Wearing Course i.e 40mm Cement concrete
Cement
Graded stone
Sand
Carriage of material
LABOUR:
For PU spray
For cement screed with Polythene sheet

Sqm
Sqm
L.S.
L.S.
Sqm

1.10
1.00
6.71
20.13
1.00

419.40
26.25
1.49
1.49
15.00

L.S.
L.S.
L.S.
L.S.

44.67
13.75
21.48
16.78

1.49
1.49
1.49
1.49

L.S.
L.S.

80.54
53.69

1.49
1.49
Total:
927.39

Add water charges @ 1% on

Add C.P & OH @15% on

936.66
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 1077.16
Rs 1077.15

Page 502 of 2298

Item Code: 12.57

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 ..
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS:
Qty for resin bonded glass wool :
For 10.00sqm finished surface = 10.00
Add 10% wastage = 1.00
Total = 11.00sqm
7232
9999

0111
0114
9999

Resin Bonded Glass wool 24 kg/m 50 mm thick

Sundries including GL wire 20 SWG and Virgin polythene bags
200 gm
LABOUR:
Carpenter 1st class
Beldar
Sundries (screws and washers)

Rate

sqm
L.S.

11.00
52.00

204.00
1.49

Day
Day
L.S.

0.50
0.50
20.00

301.00
247.00
1.49
Total:
2625.28

Add water charges @ 1% on

Add C.P & OH @15% on

2651.53
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 304.93
Rs 304.95

Item Code: 13.1.1

12 mm cement plaster of mix in CM1:4 (1 cement: 4 fine sand)
Code
03.004
0155
0115
0101
9999

Description
MATERIALS :
Cement mortar 1:4 (1 cement : 4 fine sand)
LABOUR :
Mason (average)
Coolie
Bhisthi
Scaffolding and sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Cum

0.144

2971.81

Day
Day
Day
L.S.

0.67
0.75
0.92
12.61

287.00
247.00
260.00
1.49
Total:
1063.47

Add water charges @ 1% on

Add C.P & OH @15% on

1074.10
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 123.52
Rs 123.50

Item Code: 13.1.2

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
Code
03.006
0155
0115
0101
9999

DSR-12

Description
MATERIALS :
Cement mortar 1:6 (1 cement : 6 fine sand)
(Rate as per item no. 3.6)
Mason (avge)
Coolie
Bhisthi
Scaffolding and sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Cum

0.144

2311.69

Day
Day
Day
L.S.

0.67
0.75
0.92
12.61

287.00
247.00
260.00
1.49
Total:

Page 503 of 2298

Add water charges @ 1% on

968.41

Add C.P & OH @15% on

978.09
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 112.48
Rs 112.50

Item Code: 13.2.1

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS :
03.004
Cement mortar 1:4 (1 cement : 4 fine sand)
Cum
0.172
(Rate as per item no. 3.4)
LABOUR :
0155
Mason (avge)
Day
0.80
0115
Coolie
Day
0.88
0101
Bhisthi
Day
0.99
9999
Scaffolding and sundries
L.S.
12.61
Add water charges @ 1% on

Rate
2971.81

287.00
247.00
260.00
1.49
Total:
1234.30

Add C.P & OH @15% on

1246.64
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 143.36
Rs 143.35

Item Code: 13.2.2

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS :
03.006
Cement mortar 1:6 (1 cement : 6 fine sand)
Cum
0.172
(Rate as per item no. 3.4)
LABOUR :
0155
Mason (avge)
Day
0.80
0115
Coolie
Day
0.88
0101
Bhisthi
Day
0.99
9999
Scaffolding and sundries
L.S.
12.61
Add water charges @ 1% on

Rate
2311.69

287.00
247.00
260.00
1.49
Total:
1120.76

Add C.P & OH @15% on

1131.97
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 130.18
Rs 130.20

Item Code: 13.3.1

20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
Code
03.004

DSR-12

Description
MATERIALS :
Cement mortar 1:4 (1 cement : 4 fine sand)
(Rate as per item no. 3.4)

Details of Cost for : 10.00 Sqm

Unit
Quantity
Cum

0.224

Rate
2971.81

Page 504 of 2298

0155
0115
0101
9999

LABOUR :
Mason (avge)
Coolie
Bhisthi
Scaffolding and sundries

Day
Day
Day
L.S.

0.94
1.02
1.10
12.61

Add water charges @ 1% on

287.00
247.00
260.00
1.49
Total:
1492.20

Add C.P & OH @15% on

1507.12
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 173.32
Rs 173.30

Item Code: 13.3.2

20 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
Code
03.006

0155
0115
0101
9999

Description
MATERIALS :
Cement mortar 1:6 (1 cement : 6 fine sand)
(Rate as per item no. 3.4)
LABOUR:
Mason (avge)
Coolie
Bhisthi
Scaffolding and sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Cum

0.224

2311.69

Day
Day
Day
L.S.

0.94
1.02
1.10
12.61

287.00
247.00
260.00
1.49
Total:
1344.33

Add water charges @ 1% on

Add C.P & OH @15% on

1357.77
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 156.14
Rs 156.15

Item Code: 13.4.1

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
Code
03.009
0155
0115
0101
9999

Description
MATERIALS :
Cement mortar 1:4 (1 cement : 4 coarse sand).
LABOUR :
Mason (average)
Coolie
Bhisthi
Scaffolding and sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Cum

0.144

3485.41

Day
Day
Day
L.S.

0.67
0.75
0.92
12.61

287.00
247.00
260.00
1.49
Total:
1137.43

Add water charges @ 1% on

Add C.P & OH @15% on

1148.80
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 132.11
Rs 132.10

Item Code: 13.4.2

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)

DSR-12

Page 505 of 2298

Code
03.011

0155
0115
0101
9999

Description
MATERIALS :
Cement mortar 1:6 (1 cement : 6 coarse sand).
(Rate as per item no. 3.6)
LABOUR :
Mason (avge)
Coolie
Bhisthi
Scaffolding and sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Cum

0.144

2825.29

Day
Day
Day
L.S.

0.67
0.75
0.92
12.61

287.00
247.00
260.00
1.49
Total:
1042.37

Add water charges @ 1% on

Add C.P & OH @15% on

1052.79
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 121.07
Rs 121.05

Item Code: 13.5.1

15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS :
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
Cum
0.172
(Rate as per item no. 3.9)
LABOUR:
0155
Mason (avge)
Day
0.80
0115
Coolie
Day
0.88
0101
Bhisthi
Day
0.99
9999
Scaffolding and sundries
L.S.
12.61
Add water charges @ 1% on

Rate
3485.41

287.00
247.00
260.00
1.49
Total:
1322.64

Add C.P & OH @15% on

1335.87
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 153.63
Rs 153.60

Item Code: 13.5.2

15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand)
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
03.011
Cement mortar 1:6 (1 cement : 6 coarse sand).
0.172
(Rate as per item no. 3.11)
LABOUR
0155
Mason
Day
0.80
0115
Coolie
Day
0.88
0101
Bhisti
Day
0.99
9999
Scaffolding and sundries
L.S.
12.61
Add water charges @ 1% on

Rate
2825.29

287.00
247.00
260.00
1.49
Total:
1209.10

Add C.P & OH @15% on

1221.19
Cost for 10.00 Sqm

DSR-12

Page 506 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 140.44
Rs 140.45

Item Code: 13.6.1

20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
Code
03.009

0155
0115
0101
9999

Description
MATERIALS
Cement mortar 1:4 (1 cement : 4 coarse sand).
(Rate as per item no. 3.9)
LABOUR
Mason
Coolie
Bhisti
Scaffolding and sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Cum

0.224

3485.41

Day
Day
Day
L.S.

0.94
1.02
1.10
12.61

287.00
247.00
260.00
1.49
Total:
1607.24

Add water charges @ 1% on

Add C.P & OH @15% on

1623.31
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 186.68
Rs 186.70

Item Code: 13.6.2

20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
Code
03.011

0155
0115
0101
9999

Description
MATERIALS
Cement mortar 1:6 (1 cement : 6 coarse sand).
(Rate as per item no. 3.11)
LABOUR
Mason
Coolie
Bhisti
Scaffolding and sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Cum

0.224

2825.29

Day
Day
Day
L.S.

0.94
1.02
1.10
12.61

287.00
247.00
260.00
1.49
Total:
1459.37

Add water charges @ 1% on

Add C.P & OH @15% on

1473.96
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 169.51
Rs 169.50

Item Code: 13.7.1

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand)
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
03.003
Cement mortar 1:3 (1 cement : 3 fine sand)
Cum
0.144
(Rate as per item no. 3.3)
LABOUR
0155
Mason
Day
0.67
0115
Coolie
Day
0.75
0101
Bhisti
Day
0.92
9999
Scaffolding and sundries
L.S.
12.61

DSR-12

Rate
3631.93

287.00
247.00
260.00
1.49

Page 507 of 2298

0367
2209
0155
0115
9999

Cement
Carriage of Cement
Mason
Coolie
Scaffolding and sundries

tonne
tonne
Day
Day
L.S.

0.02
0.02
0.27
0.27
8.06

Add water charges @ 1% on

5000.00
77.87
287.00
247.00
1.49
Total:
1416.28

Add C.P & OH @15% on

1430.44
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 164.50
Rs 164.50

Item Code: 13.7.2

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
03.004
Cement mortar 1:4 (1 cement : 4 fine sand)
Cum
0.144
(Rate as per item No. 3.4)
LABOUR
0155
Mason
Day
0.67
0115
Coolie
Day
0.75
0101
Bhisti
Day
0.92
9999
Scaffolding and sundries
L.S.
12.61
0367
Cement
tonne
0.02
2209
Carriage of Cement
tonne
0.02
0155
Mason
Day
0.27
0115
Coolie
Day
0.27
9999
Scaffolding and sundries
L.S.
8.06
Add water charges @ 1% on

Rate
2971.81

287.00
247.00
260.00
1.49
5000.00
77.87
287.00
247.00
1.49
Total:
1321.22

Add C.P & OH @15% on

1334.43
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 153.46
Rs 153.45

Item Code: 13.8.1

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:3 (1 cement:
3 fine sand)
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
03.003
Cement mortar 1:3 (1 cement : 3 fine sand)
Cum
0.172
3631.93
(Rate as item no. 3.3)
LABOUR
0155
Mason
Day
0.80
287.00
0115
Coolie
Day
0.88
247.00
0101
Bhisti
Day
0.99
260.00
9999
Scaffolding and sundries
L.S.
12.61
1.49
0367
Cement
tonne
0.02
5000.00
2209
Carriage of Cement
tonne
0.02
77.87
0155
Mason
Day
0.27
287.00
0115
Coolie
Day
0.27
247.00
9999
Scaffolding and sundries
L.S.
8.06
1.49

DSR-12

Page 508 of 2298

Add water charges @ 1% on

Total:
1605.59

Add C.P & OH @15% on

1621.65
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 186.49
Rs 186.50

Item Code: 13.8.2

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1 cement:
4 fine sand)
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
03.004
Cement mortar 1:4 (1 cement : 4 fine sand)
Cum
0.172
2971.81
(Rate as item no. 3.4)
LABOUR
0155
Mason
Day
0.80
287.00
0115
Coolie
Day
0.88
247.00
0101
Bhisti
Day
0.99
260.00
9999
Scaffolding and sundries
L.S.
12.61
1.49
0367
Cement
tonne
0.02
5000.00
2209
Carriage of Cement
tonne
0.02
77.87
0155
Mason
Day
0.27
287.00
0115
Coolie
Day
0.27
247.00
9999
Scaffolding and sundries
L.S.
8.06
1.49
Total:
Add water charges @ 1% on
1492.05
Add C.P & OH @15% on
1506.97
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 173.30
Rs 173.30

Item Code: 13.9.1

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster

Code
03.008
0155
0115
0101
9999
0367
2209
0155
0115
9999

Description
MATERIALS
Cement mortar 1:3 (1 cement : 3 coarse sand)
LABOUR
Mason
Coolie
Bhisti
Scaffolding and sundries
Cement
Carriage of Cement
Mason
Coolie
Scaffolding and sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Cum

0.144

4145.53

Day
Day
Day
L.S.
tonne
tonne
Day
Day
L.S.

0.67
0.75
0.92
12.61
0.02
0.02
0.27
0.27
8.06

287.00
247.00
260.00
1.49
5000.00
77.87
287.00
247.00
1.49
Total:
1490.24

Add water charges @ 1% on

Add C.P & OH @15% on

1505.14
Cost for 10.00 Sqm

DSR-12

Page 509 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 173.09
Rs 173.10

Item Code: 13.9.2

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster

Code
03.008
0155
0115
0101
9999
0367
2209
0155
0115
9999

Description
MATERIALS
Cement mortar 1:3 (1 cement : 3 coarse sand)
LABOUR
Mason
Coolie (as per cs1)
Bhisti
Scaffolding and sundries
Cement
Carriage of Cement
Mason
Coolie
Scaffolding and sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Cum

0.224

4145.53

Day
Day
Day
L.S.
tonne
tonne
Day
Day
L.S.

0.94
1.02
1.10
12.61
0.02
0.02
0.27
0.27
8.06

287.00
247.00
260.00
1.49
5000.00
77.87
287.00
247.00
1.49
Total:
2012.86

Add water charges @ 1% on

Add C.P & OH @15% on

2032.99
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 233.79
Rs 233.80

Item Code: 13.10

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half
brick wall.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
Cum
0.172
4145.53
(Rate as per item no. 3.8)
LABOUR
0155
Mason
Day
0.80
287.00
0115
Coolie
Day
0.88
247.00
0101
Bhisti
Day
0.99
260.00
9999
Scaffolding and sundries
L.S.
12.61
1.49
0367
Cement
tonne
0.02
5000.00
2209
Carriage of Cement
tonne
0.02
77.87
0155
Mason
Day
0.27
287.00
0115
Coolie
Day
0.27
247.00
9999
Scaffolding and sundries
L.S.
8.06
1.49
Total:
Add water charges @ 1% on
1693.93
Add C.P & OH @15% on
1710.87
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 196.75
Rs 196.75

Page 510 of 2298

Item Code: 13.11

18 mm CP in two coats under layer 12 mm thick CP 1:5 (1 cement: 5 coarse sand) top layer 6mm thick CP 1:6 (1 cement: 6 fine
sand).
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
03.010
Cement mortar 1:5 (1 cement : 5 coarse sand)
Cum
0.144
3129.96
coarse sand)
(Rate as per item no. 3.10)
03.006
Cement mortar 1:6 (1 cement : 6 fine sand)
Cum
0.072
2311.69
sand). (Rate as per item 3.6)
LABOUR
0155
Mason
Day
1.21
287.00
0115
Coolie
Day
1.29
247.00
0101
Bhisti
Day
1.05
260.00
9999
Scaffolding and sundries
L.S.
12.61
1.49
Total:
Add water charges @ 1% on
1574.84
Add C.P & OH @15% on
1590.59
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 182.92
Rs 182.90

Item Code: 13.12

18 mm CPin two coats under layer 12 mm thick CP 1:5 (1 cement: 5 coarse sand) and a top layer 6mm thick CP 1:3 (1 cement: 3
coarse sand)
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
03.010
Cement mortar 1:5 (1 cement : 5 coarse sand)
Cum
0.144
3129.96
coarse sand) (Rate as per item no. 3.10)
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
Cum
0.072
4145.53
coarse sand). (Rate as per item no. 3.8)
LABOUR
0155
Mason
Day
1.21
287.00
0115
Coolie
Day
1.29
247.00
0101
Bhisti
Day
1.05
260.00
9999
Scaffolding and sundries
L.S.
12.61
1.49
Total:
Add water charges @ 1% on
1706.88
Add C.P & OH @15% on
1723.95
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 198.25
Rs 198.25

Item Code: 13.13

12 mm cement plaster of mix in CM1:4 (1 cement: 4 fine sand)
Code
03.012

0155

DSR-12

Description
MATERIALS
Cement Mortar 1:2 (1 cement : 2 stone dust)
(Rate as per item no. 3.12)
LABOUR
Mason

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Cum

0.144

4678.61

Day

0.67

287.00

Page 511 of 2298

0115
0101
9999

Coolie
Bhisti
Scaffolding and sundries

Day
Day
L.S.

0.75
0.92
12.61

Add water charges @ 1% on

247.00
260.00
1.49
Total:
1309.25

Add C.P & OH @15% on

1322.34
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 152.07
Rs 152.05

Item Code: 13.14

15mm CP 1:2 (1 cement : 2 stone dust) on the rough _x000D_
Code
03.012

0155
0115
0101
9999

Description
MATERIALS
Cement Mortar 1:2 (1 cement : 2 stone dust)
(Rate as per item no. 3.12)
LABOUR
Mason
Coolie
Bhisti
Scaffolding and sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Cum

0.172

4678.61

Day
Day
Day
L.S.

0.80
0.88
0.99
12.61

287.00
247.00
260.00
1.49
Total:
1527.87

Add water charges @ 1% on

Add C.P & OH @15% on

1543.15
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 177.46
Rs 177.45

Item Code: 13.15

20 mm CP 1:2 (1 cement : 2 stone dust)
Code
03.012

0155
0115
0101
9999

Description
MATERIALS
Cement Mortar 1:2 (1 cement : 2 stone dust)
(Rate as per item no. 3.12)
LABOUR
Mason
Coolie
Bhisti
Scaffolding and sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Cum

0.224

4678.61

Day
Day
Day
L.S.

0.94
1.02
1.10
12.61

287.00
247.00
260.00
1.49
Total:
1874.52

Add water charges @ 1% on

Add C.P & OH @15% on

1893.27
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 217.73
Rs 217.75

Item Code: 13.16.1

6 mm CP of mix : 1:3 (1 cement: 3 fine sand)
Details of Cost for : 10.00 Sqm

DSR-12

Page 512 of 2298

Code
03.003
0155
0115
0101
9999
9999

Description
Unit
MATERIALS :
Cement mortar 1:3 (1 cement : 3 fine sand)
Cum
Mason (avge)
Day
LABOUR :
Coolie
Day
Bhisthi
Day
Extra for removing burrs, cleaning with wirebrushes, pock L.S.
making with pointed tool etc.
Scaffolding and sundries
L.S.

Quantity

Rate

0.072
0.51

3631.93
287.00

0.75
0.92
13.39

247.00
260.00
1.49

11.70

1.49
Total:
869.70

Add water charges @ 1% on

Add C.P & OH @15% on

878.40
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 101.02
Rs 101.00

Item Code: 13.17

6 mm CP 1:3 (1 cement: 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when
dry for bearing of R.C.C. slabs and beams.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
03.003
Cement mortar 1:3 (1 cement : 3 fine sand)
Cum
0.072
3631.93
LABOUR
0155
Mason
Day
0.51
287.00
0115
Coolie
Day
0.75
247.00
0101
Bhisti
Day
0.92
260.00
9999
Extra for removing burrs, cleaning with wire
L.S.
13.39
1.49
brushes, pock making with pointed tool etc. complete.
9999
Scaffolding and sundries
L.S.
11.70
1.49
0367
Cement
tonne
0.02
5000.00
2209
Carriage of Cement
tonne
0.02
77.87
0155
Mason
Day
0.27
287.00
0115
Coolie
Day
0.27
247.00
9999
Scaffolding and sundries
L.S.
8.06
1.49
0776
Satna lime
quint
0.01
230.00
9999
Indigo gum etc
L.S.
2.08
1.49
9999
Sundries ladder etc.
L.S.
0.52
1.49
0141
White Washer
Day
0.07
260.00
0115
Coolie
Day
0.07
247.00
9999
Sundries
L.S.
2.73
1.49
Total:
Add water charges @ 1% on
1173.18
Add C.P & OH @15% on
1184.91
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 136.27
Rs 136.25

Item Code: 13.18

Code
0367

DSR-12

Description
LABOUR
Cement

Details of Cost for : 10.00 Sqm

Unit
Quantity
tonne

0.022

Rate
5000.00

Page 513 of 2298

2209
0155
0115
9999

Carriage of Cement
Mason
Coolie
Scaffolding and sundries

tonne
Day
Day
L.S.

0.022
0.27
0.27
8.06

Add water charges @ 1% on

77.87
287.00
247.00
1.49
Total:
267.90

Add C.P & OH @15% on

270.58
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 31.12
Rs 31.10

Item Code: 13.19.1

Rough cast plaster upto 10m height above GL with a mixture of sand and gravel or crushed stone in two layers, 2mm CP 1:4 10mm CP 1:3 - Ordinary cement
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
Cum
0.144
3485.41
Cement mortar 1:4(1 cement: 4 coarse sand).
(Rate as per item no. 3.9)
0155
Mason
Day
0.67
287.00
0115
Beldar
Day
0.75
247.00
0101
Bhisti
Day
0.92
260.00
9999
Scaffolding and sundries
L.S.
9.88
1.49
Top layer 10 mm thick cement plaster
03.003
Cement mortar 1:3 (1 cement : 3 fine sand)
Cum
0.12
3631.93
0155
Mason
Day
0.61
287.00
0114
Beldar
Day
0.69
247.00
0101
Bhisti
Day
0.85
260.00
9999
Scaffolding and sundries
L.S.
9.88
1.49
1179
Crushed stone 2.36 mm to 12.5 mm size
cum
0.10
915.00
0101
Bhisti
Day
0.01
260.00
0777
Grounded hydrated lime (factory made)
quint
0.09
220.00
9999
Carriage of lime
L.S.
3.64
1.49
0155
Mason
Day
0.50
287.00
0114
Beldar
Day
0.50
247.00
0101
Bhisti
Day
0.10
260.00
9999
Scaffolding and sundries
L.S.
9.88
1.49
Labour for scooping
0123
Mason 1st class
Day
0.25
301.00
0114
Beldar
Day
0.25
247.00
Total:
Add water charges @ 1% on
2714.45
Add C.P & OH @15% on
2741.59
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 315.28
Rs 315.30

Item Code: 13.20

Pebble dash plaster upto 10m height above GL with a mixture of washed pebble or crushed stone 6mm to 12.5mm size in two
layers - 12mm CP 1:4 - 10mm CP 1:3
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:

DSR-12

Page 514 of 2298

03.009
0155
0114
0101
9999
03.003
0155
0114
0101
9999
1179
0101
0777
9999
0155
0114
0101
9999
9999

Cement mortar 1:4 (1 cement : 4 coarse sand).

LABOUR :
Mason (average)
Beldar
Bhisti
Scaffolding and sundries
Cement mortar 1:3 (1 cement : 3 fine sand)
Mason (average)
Beldar
Bhisti
Scaffolding and sundries
Sand and gravel or crushed stone 2.36 mm to
12.5 mm size
Bhisti
Grounded hydrated lime (factory made)
Carriage of lime
Mason (average)
Beldar
Bhisti
Scaffolding and sundries
Scaffolding and sundries

Cum

0.144

3485.41

Day
Day
Day
L.S.
Cum
Day
Day
Day
L.S.

0.67
0.75
0.92
9.88
0.12
0.61
0.69
0.85
9.88

287.00
247.00
260.00
1.49
3631.93
287.00
247.00
260.00
1.49

cum
Day
quint
L.S.
Day
Day
Day
L.S.
L.S.

0.10
0.01
0.09
3.64
0.50
0.50
0.10
9.88
4.42

915.00
260.00
220.00
1.49
287.00
247.00
260.00
1.49
1.49
Total:
2584.04

Add water charges @ 1% on

Add C.P & OH @15% on

2609.88
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 300.14
Rs 300.15

Item Code: 13.21

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Code

1213
9999

Details of Cost for : 1.48 units

Description
Unit
Quantity
Detail of cost for 12 mm cement plaster 1:3
(1 Cement: 3 sand) = 10 sqm. or 1.48 bags of cement used in
the mix
Cement required for 10 sqm = 73.89 kg.
Water proofing material required @ 1 kg per 50 kg of cement
= 1.48 kg.
Water proofing materials
kilog
1.48
Sundries
L.S.
7.15
Add water charges @ 1% on

Rate

25.00
1.49
Total:
47.65

Add C.P & OH @15% on

48.13
Cost for 1.48 units
Rate per Units:
Rate as per DSR-12:

Rs 37.40
Rs 37.40

Item Code: 13.22

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

Code
9999

DSR-12

Description
Scaffolding and sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
L.S.
53.82

Rate
1.49

Page 515 of 2298

0155
0115
0101
9999

LABOUR
Mason
Coolie
Bhisti
Sundries

Day
Day
Day
L.S.

0.20
0.30
0.10
7.15

Add water charges @ 1% on

287.00
247.00
260.00
1.49
Total:
248.34

Add C.P & OH @15% on

250.82
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 28.84
Rs 28.85

Item Code: 13.23.1

Extra for plastering on circular work not exceeding 6 m in radius: In one coat
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
LABOUR
0155
Mason
Day
0.20
0114
Beldar
Day
0.20
9999
Sundries
L.S.
7.15
Add water charges @ 1% on

Rate
287.00
247.00
1.49
Total:
117.45

Add C.P & OH @15% on

118.62
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 13.64
Rs 13.65

Item Code: 13.23.2

Extra for plastering on circular work not exceeding 6 m in radius: In two coats
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
LABOUR
0155
Mason
Day
0.30
0114
Beldar
Day
0.30
9999
Sundries
L.S.
13.39
Add water charges @ 1% on

Rate
287.00
247.00
1.49
Total:
180.15

Add C.P & OH @15% on

181.95
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 20.92
Rs 20.90

Item Code: 13.24.1

Extra for plastering done on moulding cornices or_x000D_
architraves including neat finish to line and level: _x000D_
Code
0155
0114
0115

DSR-12

Description
LABOUR
Mason
Beldar
Coolie

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
Day

3.00
2.00
1.00

Rate
287.00
247.00
247.00

Page 516 of 2298

0101
9999

Bhisti
Sundries

Day
L.S.

0.25
13.39

Add water charges @ 1% on

260.00
1.49
Total:
1686.95

Add C.P & OH @15% on

1703.82
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 195.94
Rs 195.95

Item Code: 13.24.2

Extra for plastering done on moulding cornices or_x000D_
architraves including neat finish to line and level: _x000D_
Code
0155
0114
0115
0101
9999

Description
LABOUR
Mason
Beldar
Coolie
Bhisti
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
Day
Day
L.S.

5.00
3.00
2.00
0.33
13.39

Add water charges @ 1% on

Rate
287.00
247.00
247.00
260.00
1.49
Total:
2775.75

Add C.P & OH @15% on

2803.51
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 322.40
Rs 322.40

Item Code: 13.25.1

Extra for plastering : Spherical ceiling
Code
0155
0114
9999

Description
LABOUR
Mason
Beldar
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
L.S.

0.75
0.74
26.91

Add water charges @ 1% on

Rate
287.00
247.00
1.49
Total:
438.13

Add C.P & OH @15% on

442.51
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 50.89
Rs 50.90

Item Code: 13.25.2

Extra for plastering : Groined ceiling
Code
0155
0114
9999

DSR-12

Description
LABOUR
Mason
Beldar
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
L.S.

0.80
0.80
34.06

Rate
287.00
247.00
1.49
Total:

Page 517 of 2298

Add water charges @ 1% on

477.95

Add C.P & OH @15% on

482.73
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 55.51
Rs 55.50

Item Code: 13.25.3

Extra for plastering : Flewing soffits
Code
0155
0114
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
LABOUR
Mason
Beldar
Sundries

Day
Day
L.S.

0.50
0.50
13.39

Add water charges @ 1% on

Rate
287.00
247.00
1.49
Total:
286.95

Add C.P & OH @15% on

289.82
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 33.33
Rs 33.35

Item Code: 13.26

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface .. ..
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
Plaster of paris 10x0.002x1121 = 22.42kg
Add 2% wastage= 0.45kg
Total = 22.45kg
Say23kg
0869
Plaster of Paris
kilog
23.00
9999
Carriage of plaster of paris
L.S.
3.90
LABOUR
0122
Mason special
Day
0.91
0114
Beldar
Day
0.91
9999
Scaffolding and sundries
L.S.
83.98
Add water charges @ 1% on

Rate

4.00
1.49
301.00
247.00
1.49
Total:
721.62

Add C.P & OH @15% on

728.84
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 83.82
Rs 83.80

Item Code: 13.27

Extra for lining out plaster to imitate stone or concrete blocks walling
Code
0155
0114
9999

DSR-12

Description
LABOUR
Mason
Beldar
Solution of lime putty

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
L.S.

0.50
0.50
1.82

Rate
287.00
247.00
1.49

Page 518 of 2298

Add water charges @ 1% on

Total:
269.71

Add C.P & OH @15% on

272.41
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 31.33
Rs 31.35

Item Code: 13.28.1

12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine sand) : Flush Band
Details of Cost for : 100.00 units
Code
Description
Unit
Quantity
MATERIALS
03.004
Cement mortar 1:4 (1 cement : 4 fine sand)
Cum
0.014
(Rate as per item no. 3.4)
LABOUR
0155
Mason
Day
0.27
0115
Coolie
Day
0.27
0101
Bhisti
Day
0.05
9999
Sundries
L.S.
1.43
Add water charges @ 1% on

Rate
2971.81

287.00
247.00
260.00
1.49
Total:
200.92

Add C.P & OH @15% on

202.93
Cost for 100.00 units
Rate per Cm/mtr:
Rate as per DSR-12:

Rs 2.33
Rs 2.35

Item Code: 13.28.2

12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine sand) : Sunk Band
Details of Cost for : 100.00 units
Code
Description
Unit
Quantity
MATERIALS
03.004
Cement mortar 1:4 (1 cement : 4 fine sand)
Cum
0.014
(Rate as per item no. 3.4)
LABOUR
0155
Mason
Day
0.30
0115
Coolie
Day
0.30
0101
Bhisti
Day
0.05
9999
Sundries
L.S.
2.08
Add water charges @ 1% on

Rate
2971.81

287.00
247.00
260.00
1.49
Total:
217.91

Add C.P & OH @15% on

220.09
Cost for 100.00 units
Rate per Cm/mtr:
Rate as per DSR-12:

Rs 2.53
Rs 2.55

Item Code: 13.28.3

12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine sand) : Raised Band
Details of Cost for : 100.00 units
Code
Description
Unit
Quantity
Rate
MATERIALS
03.004
Cement mortar 1:4 (1 cement : 4 fine sand)
Cum
0.014
2971.81

DSR-12

Page 519 of 2298

0155
0115
0101
9999

(Rate as per item no. 3.4)

LABOUR
Mason
Coolie
Bhisti
Sundries

Day
Day
Day
L.S.

0.35
0.35
0.05
2.73

Add water charges @ 1% on

287.00
247.00
260.00
1.49
Total:
245.58

Add C.P & OH @15% on

248.04
Cost for 100.00 units
Rate per Cm/mtr:
Rate as per DSR-12:

Rs 2.85
Rs 2.85

Item Code: 13.28.4

12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine sand) : Moulded Band
Details of Cost for : 100.00 units
Code
Description
Unit
Quantity
MATERIALS
03.004
Cement mortar 1:4 (1 cement : 4 fine sand)
Cum
0.014
(Rate as per item No 3.4)
LABOUR
0155
Mason
Day
0.65
0115
Coolie
Day
0.65
0101
Bhisti
Day
0.05
9999
Sundries
L.S.
1.56
Add water charges @ 1% on

Rate
2971.81

287.00
247.00
260.00
1.49
Total:
404.03

Add C.P & OH @15% on

408.07
Cost for 100.00 units
Rate per Cm/mtr:
Rate as per DSR-12:

Rs 4.69
Rs 4.70

Item Code: 13.29.1

18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement: 4 fine sand): Flush Band
Details of Cost for : 100.00 units
Code
Description
Unit
Quantity
MATERIALS
03.004
Cement mortar 1:4 (1 cement : 4 fine sand)
Cum
0.02
(Rate as per item no. 3.4)
LABOUR
0155
Mason
Day
0.32
0115
Coolie
Day
0.32
0101
Bhisti
Day
0.06
9999
Sundries
L.S.
2.08
Add water charges @ 1% on

Rate
2971.81

287.00
247.00
260.00
1.49
Total:
249.02

Add C.P & OH @15% on

251.51
Cost for 100.00 units
Rate per Cm/mtr:
Rate as per DSR-12:

DSR-12

Rs 2.89
Rs 2.90

Page 520 of 2298

Item Code: 13.29.2

18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement: 4 fine sand): Sunk Band
Details of Cost for : 100.00 units
Code
Description
Unit
Quantity
MATERIALS
03.004
Cement mortar 1:4 (1 cement : 4 fine sand)
Cum
0.02
(rate as per item no. 3.4)
LABOUR
0155
Mason
Day
0.36
0115
Coolie
Day
0.36
0101
Bhisti
Day
0.06
9999
Sundries
L.S.
2.73
Add water charges @ 1% on

Rate
2971.81

287.00
247.00
260.00
1.49
Total:
271.35

Add C.P & OH @15% on

274.06
Cost for 100.00 units
Rate per Cm/mtr:
Rate as per DSR-12:

Rs 3.15
Rs 3.15

Item Code: 13.29.3

18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement: 4 fine sand): Raised Band
Details of Cost for : 100.00 units
Code
Description
Unit
Quantity
MATERIALS
03.004
Cement mortar 1:4 (1 cement : 4 fine sand)
Cum
0.02
(rate as per item no. 3.4)
LABOUR
0155
Mason
Day
0.42
0115
Coolie
Day
0.42
0101
Bhisti
Day
0.06
9999
Sundries
L.S.
4.42
Add water charges @ 1% on

Rate
2971.81

287.00
247.00
260.00
1.49
Total:
305.91

Add C.P & OH @15% on

308.97
Cost for 100.00 units
Rate per Cm/mtr:
Rate as per DSR-12:

Rs 3.55
Rs 3.55

Item Code: 13.29.4

18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement: 4 fine sand): Moulded Band
Details of Cost for : 100.00 units
Code
Description
Unit
Quantity
MATERIALS
03.004
Cement mortar 1:4 (1 cement : 4 fine sand)
Cum
0.024
(rate as per item no. 3.4)
LABOUR
0155
Mason
Day
0.86
0115
Coolie
Day
0.86
0101
Bhisti
Day
0.05
9999
Sundries
L.S.
2.73

DSR-12

Rate
2971.81

Add water charges @ 1% on

287.00
247.00
260.00
1.49
Total:
547.63

Add C.P & OH @15% on

553.11

Page 521 of 2298

Cost for 100.00 units

Rate per Cm/mtr:
Rate as per DSR-12:

Rs 6.36
Rs 6.35

Item Code: 13.30

18 mm thick moulded CM band in two coats - 12mm 1:5 and 6mm 1:4
Code

03.010
03.004

0155
0115
0101
9999

Description
Detail of cost for 10 metre long and 10 cm wide band
MATERIALS
Cement mortar 1:5 (1 cement : 5 coarse sand)
(rate as per item no. 3.10)
Cement mortar 1:4 (1 cement : 4 fine sand)
(rate as per item no. 3.4)
LABOUR
Mason
Coolie
Bhisti
Sundries

Details of Cost for : 100.00 units

Unit
Quantity

Rate

Cum

0.014

3129.96

Cum

0.01

2971.81

Day
Day
Day
L.S.

0.86
0.86
0.05
2.73

287.00
247.00
260.00
1.49
Total:
549.85

Add water charges @ 1% on

Add C.P & OH @15% on

555.35
Cost for 100.00 units
Rate per Cm/mtr:
Rate as per DSR-12:

Rs 6.39
Rs 6.40

Item Code: 13.31.1

Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand) : Flush / Ruled/ Struck or weathered
pointing.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
03.003
Cement mortar 1:3 (1 cement : 3 fine sand)
Cum
0.03
3631.93
(rate as per item no. 3.3)
LABOUR
0155
Mason
Day
0.50
287.00
0115
Coolie
Day
0.60
247.00
0101
Bhisti
Day
0.93
260.00
9999
Sundries
L.S.
7.15
1.49
9999
Scaffolding and racking out joints including sundries
L.S.
14.30
1.49
Total:
Add water charges @ 1% on
674.42
Add C.P & OH @15% on
681.16
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 78.33
Rs 78.35

Item Code: 13.31.2

Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand) : Raised and cut pointing

Code

DSR-12

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Page 522 of 2298

03.003

0155
0115
0101
9999
9999

MATERIALS
Cement mortar 1:3 (1 cement : 3 fine sand)
(rate as per item no. 3.3)
LABOUR
Mason
Coolie
Bhisti
Sundries
Scaffolding and racking out joints including sundries

Cum

0.046

3631.93

Day
Day
Day
L.S.
L.S.

1.07
1.31
1.00
7.15
16.12

287.00
247.00
260.00
1.49
1.49
Total:
1092.40

Add water charges @ 1% on

Add C.P & OH @15% on

1103.32
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 126.88
Rs 126.90

Item Code: 13.32.1

Pointing on tile brick work with cement mortar 1:3 (1 cement:3 fine sand) : Flush/ Ruled/ Struck or weathered pointing

Code
03.003
9999
0155
0115
0101
9999

Description
MATERIALS
Cement mortar 1:3 (1 cement : 3 fine sand)
(rate as per item no. 3.3)
Sundries
LABOUR
Mason
Coolie
Bhisti
Scaffolding and racking out joints including sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Cum

0.046

3631.93

L.S.

7.15

1.49

Day
Day
Day
L.S.

0.67
0.80
1.28
16.12

287.00
247.00
260.00
1.49
Total:
924.43

Add water charges @ 1% on

Add C.P & OH @15% on

933.67
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 107.37
Rs 107.35

Item Code: 13.33.1

Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) : Flush/ Ruled pointing
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
03.003
Cement mortar 1:3 (1 cement : 3 fine sand)
Cum
0.023
(rate as per item no. 3.3)
9999
Sundries
L.S.
7.15
LABOUR
0155
Mason
Day
0.92
0115
Coolie
Day
1.37
0101
Bhisti
Day
0.93
9999
Scaffolding and racking out joints including sundries
L.S.
16.12

DSR-12

Rate
3631.93
1.49

Add water charges @ 1% on

287.00
247.00
260.00
1.49
Total:
962.43

Add C.P & OH @15% on

972.05

Page 523 of 2298

Cost for 10.00 Sqm

Rate per One Sqm:
Rate as per DSR-12:

Rs 111.79
Rs 111.80

Item Code: 13.33.2

Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) : Raised and cut pointing
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
03.003
Cement mortar 1:3 (1 cement : 3 fine sand)
Cum
0.038
(rate as per item no. 3.3)
9999
Sundries
L.S.
7.15
LABOUR
0155
Mason
Day
2.00
0115
Coolie
Day
2.96
0101
Bhisti
Day
1.00
9999
Scaffolding and racking out joints including sundries
L.S.
16.12
Add water charges @ 1% on

Rate
3631.93
1.49
287.00
247.00
260.00
1.49
Total:
1737.80

Add C.P & OH @15% on

1755.18
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 201.85
Rs 201.85

Item Code: 13.34

Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement: 3 marble dust)
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
03.016
White Cement Mortar 1:3 (1 white cement : 3 marble dust)
Cum
0.038

9999
0155
0115
0101
9999

marble dust. (rate as per item no. 3.16)

Sundries
LABOUR
Mason
Coolie
Bhisti
Scaffolding and racking out joints including sundries

Rate
7587.13

L.S.

7.15

1.49

Day
Day
Day
L.S.

2.00
2.96
1.00
16.12

287.00
247.00
260.00
1.49
Total:
1888.10

Add water charges @ 1% on

Add C.P & OH @15% on

1906.98
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 219.30
Rs 219.30

Item Code: 13.35.1

Pointing on stone slab ceiling with cement mortar 1:2 (1 cement: 2 fine sand): Flush/ Ruled pointing
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
03.002
Cement mortar 1:2 (1Cement : 2 fine sand)
Cum
0.015
(rate as per item no. 3.2)

DSR-12

Rate
4407.86

Page 524 of 2298

0155
0115
0101
9999

LABOUR
Mason
Coolie
Bhisti
Scaffolding and racking out joints including sundries

Day
Day
Day
L.S.

0.47
0.69
0.59
16.12

Add water charges @ 1% on

287.00
247.00
260.00
1.49
Total:
548.86

Add C.P & OH @15% on

554.35
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 63.75
Rs 63.75

Item Code: 13.36

Extra for pointing on walls on the outside at height more than 10 m from ground level for every additional height of 3 m or part
there of.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
LABOUR
9999
Scaffolding
L.S.
13.39
1.49
9999
sundries
L.S.
13.39
1.49
Total:
Add water charges @ 1% on
39.90
Add C.P & OH @15% on
40.30
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 4.64
Rs 4.65

Item Code: 13.37.1

White washing with lime to give an even shade:
Code
0775
9999
0141
0115
9999
9999

Description
MATERIALS :
White lime
Carriage of lime
LABOUR :
White washer
Coolie
Indigo gum etc
Sundries ladders etc

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

quint
L.S.

0.03
0.91

410.00
1.49

Day
Day
L.S.

0.20
0.10
4.42

260.00
247.00
1.49

L.S.

2.73

1.49
Total:
101.02

Add water charges @ 1% on

Add C.P & OH @15% on

102.03
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 11.73
Rs 11.75

Item Code: 13.38

Code

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

MATERIALS :

DSR-12

Page 525 of 2298

0776
9999

Satna lime
Carriage of lime

9999

Indigo gum etc

LABOUR
White washer
Coolie
Sundries ladders etc

0141
0115
9999

quint

0.01

230.00

L.S.
L.S.

2.08
0.52

1.49
1.49

Day
Day
L.S.

0.08
0.04
2.73

260.00
247.00
1.49
Total:
40.92

Add water charges @ 1% on

Add C.P & OH @15% on

41.33
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 4.75
Rs 4.75

Item Code: 13.39.1

Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing
with lime
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
0775
Dehradun white lime
quint
0.03
410.00
9999
Carriage of lime
L.S.
8.06
1.49
9999
Add for colouring stuff
L.S.
0.91
1.49
LABOUR
0141
White Washer
Day
0.30
260.00
0115
Coolie
Day
0.10
247.00
9999
Indigo gum etc
L.S.
4.42
1.49
9999
Sundries ladders etc
L.S.
2.73
1.49
Total:
Add water charges @ 1% on
139.03
Add C.P & OH @15% on
140.42
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 16.15
Rs 16.15

Item Code: 13.39.2

Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing
with lime
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
0775
Dehradun white lime
quint
0.03
410.00
9999
Carriage of lime
L.S.
8.06
1.49
9999
Add for colouring stuff
L.S.
0.91
1.49
LABOUR
0141
White Washer
Day
0.30
260.00
0115
Coolie
Day
0.10
247.00
9999
Indigo gum etc
L.S.
2.73
1.49
9999
Sundries ladders etc
L.S.
2.73
1.49
Total:
Add water charges @ 1% on
136.51
Add C.P & OH @15% on

DSR-12

137.88

Page 526 of 2298

Cost for 10.00 Sqm

Rate per One Sqm:
Rate as per DSR-12:

Rs 15.86
Rs 15.85

Item Code: 13.40

Distempering with dry distemper (two or more coats) on new work, over and including priming coat of whiting to give an even
shade.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
1216
Whiting
quint
0.01
400.00
9999
Putty, glue etc
L.S.
2.73
1.49
0815
Dry distemper
kilog
1.50
35.00
9999
Carriage of material
L.S.
1.56
1.49
9999
Brushes, sand paper etc
L.S.
7.15
1.49
LABOUR:
0131
Painter
Day
0.80
273.00
0115
Coolie
Day
0.40
247.00
9999
Sundries
L.S.
5.38
1.49
Total:
Add water charges @ 1% on
398.76
Add C.P & OH @15% on
402.75
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 46.32
Rs 46.30

Item Code: 13.41.1

Distempering with OBD New work (two or more coats) over and including priming coat with cement primer.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
0820
Cement primer
litre
0.70
9999
Brushes, putty etc
L.S.
7.15
9999
Sundries including Carriage
L.S.
8.06
0816
Dry distemper
kilog
1.50
9999
Carriage of material
L.S.
4.42
9999
Brushes, sand paper and putty for filling holes
L.S.
11.70
LABOUR
0131
Painter
Day
1.00
0115
Coolie
Day
0.50
9999
Sundries
L.S.
8.06
Add water charges @ 1% on

Rate
80.00
1.49
1.49
42.00
1.49
1.49
273.00
247.00
1.49
Total:
574.19

Add C.P & OH @15% on

579.93
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 66.69
Rs 66.70

Item Code: 13.42.1

Distempering with 1st quality acrylic washable distemper Two or more coats on new work.

DSR-12

Page 527 of 2298

Code
0816
9999
9999
0131
0114
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS
Oil bound washable distemper/ Acrylic distemper
Carriage of material
Brushes, sand paper and putty for filling holes
LABOUR
Painter
Beldar
Sundries

Rate

kilog
L.S.
L.S.

1.50
4.42
11.57

42.00
1.49
1.49

Day
Day
L.S.

0.40
0.46
8.06

273.00
247.00
1.49
Total:
321.66

Add water charges @ 1% on

Add C.P & OH @15% on

324.88
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 37.36
Rs 37.35

Item Code: 13.43.1

Applying one coat of cement primer on wall surface : - Cement primer.
Code
0820
9999
0131
0115
9999

Description
MATERIALS:
Cement primer
Brushes, putty etc
LABOUR:
Painter
Coolie
Sundries including carriage

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
L.S.

0.70
7.15

80.00
1.49

Day
Day

0.40
0.20

273.00
247.00

L.S.

8.06

1.49
Total:
237.26

Add water charges @ 1% on

Add C.P & OH @15% on

239.63
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 27.56
Rs 27.55

Item Code: 13.44.1

Finishing walls with water proofing cement paint : New work (Two or more coats )
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
0851
Water proofing cement paint
kilog
3.84
9999
Carriage of material
L.S.
1.56
LABOUR
0131
Painter
Day
0.46
0115
Coolie
Day
0.23
0101
Bhisti
Day
0.10
9999
Brushes, sand paper etc
L.S.
7.15
9999
Sundries
L.S.
8.06
Add water charges @ 1% on

Rate
40.00
1.49
273.00
247.00
260.00
1.49
1.49
Total:
386.97

Add C.P & OH @15% on

390.84
Cost for 10.00 Sqm

DSR-12

Page 528 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 44.95
Rs 44.95

Item Code: 13.45.1

Finishing walls with textured exterior paint : New work (Two or more coats ) over a base coat of WP cement paint applied @
2.20kg/10 sqm.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
8507
Textured exterior paint
litre
3.28
198.00
0851
Water proofing cement paint
kilog
2.20
40.00
9999
Carriage of material
L.S.
1.56
1.49
LABOUR
0131
Painter
Day
0.60
273.00
0115
Coolie
Day
0.30
247.00
0101
Bhisti
Day
0.05
260.00
9999
Brushes, sand paper etc
L.S.
7.02
1.49
9999
Sundries
L.S.
8.06
1.49
Total:
Add water charges @ 1% on
1013.13
Add C.P & OH @15% on
1023.26
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 117.68
Rs 117.70

Item Code: 13.46.1

Finishing walls with Acrylic Smooth exterior paint : New work (Two or more coat ).
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
8505
Acrylic exterior paint
litre
1.67
0851
Water proofing cement paint
kilog
2.20
9999
Carriage of material
L.S.
1.56
LABOUR
0131
Painter
Day
0.60
0115
Coolie
Day
0.30
0101
Bhisti
Day
0.05
9999
Brushes, sand paper etc
L.S.
7.15
9999
Sundries
L.S.
8.06
Add water charges @ 1% on

Rate
130.00
40.00
1.49
273.00
247.00
260.00
1.49
1.49
Total:
580.98

Add C.P & OH @15% on

586.79
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 67.48
Rs 67.50

Item Code: 13.47.1

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats
).
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS

DSR-12

Page 529 of 2298

8506
0851
9999
0131
0115
0101
9999
9999

Premium Acrylic exterior paint

Water proofing cement paint
Carriage of material
LABOUR
Painter
Coolie
Bhisti
Brushes, sand paper etc
Sundries

litre
kilog
L.S.

1.43
2.20
1.56

230.00
40.00
1.49

Day
Day
Day
L.S.
L.S.

0.60
0.30
0.05
7.15
8.06

273.00
247.00
260.00
1.49
1.49
Total:
692.78

Add water charges @ 1% on

Add C.P & OH @15% on

699.71
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 80.47
Rs 80.45

Item Code: 13.48.1

Finishing walls with Deluxe Multi surface paint : Two or more coats
Code
8504
8509
9999

0131
0115
0101
9999
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS:
Multi surface paint
Special primer
Carriage of materials

Rate

litre
litre

1.25
0.75

272.00
83.00

L.S.

1.25

1.49

LABOUR:
Painter
Coolie
Bhisthi

Day
Day
Day

0.60
0.30
0.05

273.00
247.00
260.00

Sundries

L.S.
L.S.

7.02
8.06

1.49
1.49
Total:
677.48

Add water charges @ 1% on

Add C.P & OH @15% on

684.25
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 78.69
Rs 78.75

Item Code: 13.48.2

Painting wood work with Deluxe Multi surface paint Two or more coats
Code
8504
8509
9999
0131
0115
0101
9999
9999

DSR-12

Description
MATERIALS :
Multi surface paint
Special primer
Carriage of material
LABOUR:
Painter
Coolie
Bhisthi
Brushes, sand paper etc
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
litre
L.S.

0.90
0.75
1.56

272.00
83.00
1.49

Day
Day
Day
L.S.
L.S.

0.60
0.30
0.05
7.02
8.06

273.00
247.00
260.00
1.49
1.49
Total:

Page 530 of 2298

Add water charges @ 1% on

582.74

Add C.P & OH @15% on

588.57
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 67.69
Rs 67.70

Item Code: 13.48.3

Painting Steel work with Deluxe Multi surface paint Two or more coats
Code
8504
8510
9999
0131
0115
0101
9999
9999

Description
MATERIALS :
Multi surface paint
Metal Primer (U.G.)
Carriage of material
LABOUR:
Painter
Coolie
Bhisthi
Brushes, sand paper etc
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
litre
L.S.

0.90
0.80
1.56

272.00
107.00
1.49

Day
Day
Day
L.S.
L.S.

0.60
0.30
0.05
7.02
8.06

273.00
247.00
260.00
1.49
1.49
Total:
606.09

Add water charges @ 1% on

Add C.P & OH @15% on

612.15
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 70.40
Rs 70.40

Item Code: 13.50.1

Applying priming coat : With ready mixed pink or Grey primer (hard and soft wood)
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
0823
Primer
litre
0.75
9999
Putty
L.S.
2.73
9999
Carriage
L.S.
0.39
LABOUR
0131
Painter
Day
0.25
0115
Coolie
Day
0.25
9999
Brushes, sand paper etc
L.S.
5.33
9999
Sundries
L.S.
10.79
Add water charges @ 1% on

Rate
85.00
1.49
1.49
273.00
247.00
1.49
1.49
Total:
222.42

Add C.P & OH @15% on

224.64
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 25.83
Rs 25.85

Item Code: 13.50.2

Applying priming coat : With ready mixed aluminium primer on resinous wood and plywood
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity

DSR-12

Rate

Page 531 of 2298

4201
9999

MATERIALS:
Aluminium primer
Putty

9999

Carriage

0131
0115
9999

LABOUR:
Painter
Coolie
Brushes, sand paper etc

9999

Sundries

litre

0.75

72.00

L.S.

2.73

1.49

L.S.

0.39

1.49

Day
Day

0.25
0.25

273.00
247.00

L.S.
L.S.

5.33
10.79

1.49
1.49
Total:
212.67

Add water charges @ 1% on

Add C.P & OH @15% on

214.80
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 24.70
Rs 24.70

Item Code: 13.50.3

Applying priming coat : With ready mixed red oxide zinc chromate primer on steel galvanised iron/steel works

Code
4202
9999
0131
0115
9999

Description
MATERIALS
Red oxide Zinc chromate yellow primer
Carriage
LABOUR
Painter
Coolie
Brushes,sand paper including sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
L.S.

0.54
0.52

68.00
1.49

Day
Day
L.S.

0.24
0.24
10.79

273.00
247.00
1.49
Total:
178.37

Add water charges @ 1% on

Add C.P & OH @15% on

180.15
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 20.72
Rs 20.70

Item Code: 13.50.4

Applying priming coat : With ready mixed red oxide zinc chromate primer on steel work (second coat)
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
4202
Zinc chromate - Red Oxide - primer
litre
0.36
9999
Carriage
L.S.
0.39
0131
Painter
Day
0.12
0115
Coolie
Day
0.12
9999
Brushes,sand paper including sundries
L.S.
7.15
Add water charges @ 1% except on [A] i.e on

Rate
68.00
1.49
273.00
247.00
1.49
Total:
98.11

Add C.P & OH @15% except on [A] i.e on

99.09
Cost for 10.00 Sqm

DSR-12

Page 532 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 11.40
Rs 11.40

Item Code: 13.51.1

Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion
of plastered surfaces : One coat
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
0801
Silicon and acrylic emulsion
Ltr
1.80
140.00
9999
Carriage of material
L.S.
0.52
1.49
9999
Putty etc.,
L.S.
2.73
1.49
LABOUR:
0131
Painter
Day
0.27
273.00
0115
Coolie
Day
0.27
247.00
9999
Brushes, sand paper etc.,
L.S.
5.33
1.49
9999
Sundries
L.S.
10.79
1.49
Total:
Add water charges @ 1% on
421.26
Add C.P & OH @15% on
425.47
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 48.93
Rs 48.95

Item Code: 13.51.2

Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion
of plastered surfaces : Two coats
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
0801
Silicon and acrylic emulsion
Ltr
2.88
140.00
9999
Carriage of material
L.S.
0.52
1.49
9999
Putty etc.,
L.S.
2.73
1.49
LABOUR:
0131
Painter
Day
0.43
273.00
0115
Coolie
Day
0.43
247.00
9999
Brushes, sand paper etc.,
L.S.
8.53
1.49
9999
Sundries
L.S.
17.26
1.49
Total:
Add water charges @ 1% on
670.07
Add C.P & OH @15% on
676.77
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 77.83
Rs 77.85

Item Code: 13.52.1

Finishing with Epoxy paint (two or more coats) appropriate priming coat, On steel work
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
PRIMING COAT
MATERIALS
4202
Primer
litre
0.75
9999
Putty
L.S.
2.73

DSR-12

Rate

68.00
1.49

Page 533 of 2298

9999
0131
0115
9999
9999

7239
9999
0131
0115
9999
9999

Carriage
LABOUR
Painter
Coolie
Brushes, sand paper etc
Sundries
EPOXY PAINTING
MATERIALS
Epoxy paint
Carriage of material
LABOUR
Painter
Coolie
Putty, brushes, sand paper etc
Sundries

L.S.

0.39

1.49

Day
Day
L.S.
L.S.

0.25
0.25
5.46
10.66

273.00
247.00
1.49
1.49

litre
L.S.

1.25
1.43

315.00
1.49

Day
Day
L.S.
L.S.

0.54
0.54
6.76
8.06

273.00
247.00
1.49
1.49
Total:
908.43

Add water charges @ 1% on

Add C.P & OH @15% on

917.51
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 105.51
Rs 105.50

Item Code: 13.52.2

Finishing with Epoxy paint (two or more coats) appropriate priming coat, . On concrete work
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
PRIMING COAT
MATERIALS
0821
Primer
litre
0.84
9999
Putty
L.S.
13.52
9999
Carriage
L.S.
0.52
LABOUR
0131
Painter
Day
0.25
0115
Coolie
Day
0.25
9999
Brushes, sand paper etc
L.S.
2.73
9999
Sundries
L.S.
8.06
EPOXY PAINTING
MATERIALS
7239
Epoxy paint
litre
1.21
9999
Materials for filling in holes and cracks (putty etc)
L.S.
6.76
9999
Carriage of material
L.S.
1.43
LABOUR
0131
Painter
Day
0.54
0115
Coolie
Day
0.54
9999
Putty, brushes, sand paper etc
L.S.
10.79
9999
Sundries
L.S.
6.76
Add water charges @ 1% on

Rate

80.00
1.49
1.49
273.00
247.00
1.49
1.49

315.00
1.49
1.49
273.00
247.00
1.49
1.49
Total:
934.49

Add C.P & OH @15% on

943.83
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 108.54
Rs 108.55

Item Code: 13.53.1

DSR-12

Page 534 of 2298

Painting on G.S. sheet with synthetic enamel paint : New work (two or more coats) including a coat of approved steel primer but
excluding a coat of mordant solution.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
PRIMING COAT
MATERIALS
4202
Steel primer
litre
0.36
68.00
9999
Carriage
L.S.
0.39
1.49
LABOUR
0131
Painter
Day
0.12
273.00
0114
Beldar
Day
0.12
247.00
9999
Brushes, sand paper etc
L.S.
7.15
1.49
EPOXY PAINTING
MATERIALS
0834
Synthetic enamel paint
litre
0.80
135.00
9999
Carriage
L.S.
1.43
1.49
LABOUR
0131
Painter
Day
0.54
273.00
0115
Coolie
Day
0.54
247.00
9999
Putty, brushes, sand paper etc
L.S.
6.76
1.49
9999
Sundries
L.S.
8.06
1.49
Total:
Add water charges @ 1% on
511.12
Add C.P & OH @15% on
516.23
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 59.37
Rs 59.35

Item Code: 13.54.1

Applying a coat of mordant solution on G.S. sheet : With a solution of 38 gms of copper acetate in a litre of soft water

Code
4203
9999
9999
0131
0115
9999
9999

Description
MATERIALS:
Copper acetate
Soft water
Carriage
LABOUR:
Painter
Coolie
Brushes, sand paper etc.
Sundries

Details of Cost for : 25.00 Sqm

Unit
Quantity

Rate

kilog
L.S.
L.S.

0.038
1.82
0.91

270.00
1.49
1.49

Day
Day
L.S.
L.S.

0.60
0.60
35.88
35.88

273.00
247.00
1.49
1.49
Total:
433.25

Add water charges @ 1% on

Add C.P & OH @15% on

437.58
Cost for 25.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 20.13
Rs 20.15

Item Code: 13.54.2

Applying a coat of mordant solution on G.S. sheet : With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms
each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water
Details of Cost for : 25.00 Sqm

DSR-12

Page 535 of 2298

Code
4204
4205
4206
9999
9999
4207
0131
0115
9999
9999

Description
MATERIALS:
Hydrochloric acid
Copper chloride
Copper nitrate
Soft water
Carriage
Ammonium chloride
LABOUR:
Painter
Coolie
Brushes, sand paper etc.
Sundries

Unit

Quantity

Rate

kilog
kilog
kilog
L.S.
L.S.
kilog

0.013
0.013
0.013
1.82
0.91
0.013

32.00
272.00
200.00
1.49
1.49
15.00

Day
Day
L.S.
L.S.

0.60
0.60
35.88
35.88

273.00
247.00
1.49
1.49
Total:
429.75

Add water charges @ 1% on

Add C.P & OH @15% on

434.05
Cost for 25.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 19.97
Rs 19.95

Item Code: 13.55.1

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint on new
work : 100 mm diameter pipes
Details of Cost for : 30.00 m
Code
Description
Unit
Quantity
Rate
4202
Zinc chromate - Red Oxide - primer
litre
0.54
68.00
9999
Carriage
L.S.
0.52
1.49
0131
Painter
Day
0.24
273.00
0115
Coolie
Day
0.24
247.00
9999
Brushes, sand paper etc
L.S.
10.79
1.49
0828
Anti-corrosive bitumastic paint
litre
0.95
85.00
9999
Carriage
L.S.
1.43
1.49
0131
Painter
Day
0.54
273.00
0115
Coolie
Day
0.54
247.00
9999
Putty, sand paper etc
L.S.
5.33
1.49
9999
Sundries
L.S.
8.06
1.49
9999
Wire brushes for cleaning
L.S.
5.33
1.49
9999
Extra for delays
L.S.
61.10
1.49
Total:
Add water charges @ 1% on
660.98
Add C.P & OH @15% on
667.59
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 25.59
Rs 25.60

Item Code: 13.55.2

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint on new
work : 150 mm diameter pipes

DSR-12

Page 536 of 2298

Code
4202
0131
0115
9999

Description
Zinc chromate - Red Oxide - primer
Painter
Coolie
Brushes, sand paper etc

9999
0828
9999

Anti-corrosive bitumastic paint

Carriage

0131
0115
9999

Painter
Coolie
Putty, sand paper etc

9999
9999

Sundries
Wire brushes for cleaning

9999

Extra for delays

Details of Cost for : 30.00 m

Unit
Quantity
litre
0.80
Day
0.36
Day
0.36

Rate
68.00
273.00
247.00

L.S.
L.S.
litre

15.99
0.91
1.41

1.49
1.49
85.00

L.S.
Day
Day

2.08
0.80
0.80

1.49
273.00
247.00

L.S.
L.S.

8.06
11.06

1.49
1.49

L.S.

7.15

1.49

L.S.

94.12

1.49
Total:
985.12

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

994.97
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 38.14
Rs 38.20

Item Code: 13.56.1

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint new work. 100 mm
diameter pipes
Details of Cost for : 30.00 m
Code
Description
Unit
Quantity
Rate
Area=22/7 x 106.40/1000 x 30 m = 10.032
MATERIALS
4202
Red oxide Zinc chromate primer
litre
0.54
68.00
9999
Carriage
L.S.
0.52
1.49
LABOUR
0131
Painter
Day
0.24
273.00
0115
Coolie
Day
0.24
247.00
9999
Sundries
L.S.
10.79
1.49
MATERIALS
0833
Synthetic enamel paint in black or chocolate shade
litre
1.16
130.00
9999
Carriage
L.S.
1.43
1.49
9999
Putty, sand paper etc.
L.S.
5.33
1.49
LABOUR
0131
Painter
Day
0.54
273.00
0115
Coolie
Day
0.54
247.00
9999
Sundries
L.S.
6.76
1.49
9999
Wire brushes for cleaning
L.S.
11.96
1.49
9999
Extra for delays
L.S.
66.43
1.49
Total:
Add water charges @ 1% on
746.91
Add C.P & OH @15% on
754.38
Cost for 30.00 m
Rate per One Metre:

DSR-12

Rs 28.92

Page 537 of 2298

Rate as per DSR-12:

Rs 28.90

Item Code: 13.56.2

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint new work. 150 mm
diameter pipes
Details of Cost for : 30.00 m
Code
Description
Unit
Quantity
Rate
Area=22/7 xl57.2mm x30m =14.82sqm
MATERIALS
4202
Red oxide Zinc chromate primer
litre
0.80
68.00
9999
Carriage
L.S.
0.65
1.49
LABOUR
0131
Painter
Day
0.36
273.00
0115
Coolie
Day
0.36
247.00
9999
Sundries
L.S.
15.99
1.49
MATERIALS
0833
Synthetic enamel paint in black or chocolate shade
litre
1.72
130.00
9999
Carriage
L.S.
2.08
1.49
9999
Putty, sand paper etc
L.S.
7.93
1.49
LABOUR
0131
Painter
Day
0.80
273.00
0115
Coolie
Day
0.80
247.00
9999
Sundries
L.S.
10.01
1.49
9999
Wire brushes for cleaning
L.S.
17.81
1.49
9999
Extra for delays
L.S.
101.40
1.49
Total:
Add water charges @ 1% on
1113.46
Add C.P & OH @15% on
1124.59
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 43.11
Rs 43.10

Item Code: 13.57.1

Painting with oil type wood preservative : New work (two or more coats).
Code

0859
9999
0131
0115
9999
9999

Description
Detail of cost for 10 sqm
MATERIALS
Oil type wood preservative
Carriage of material
LABOUR
Painter
Coolie
Brushes etc
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
L.S.

1.00
0.52

70.00
1.49

Day
Day
L.S.
L.S.

0.15
0.15
4.16
3.90

273.00
247.00
1.49
1.49
Total:
160.78

Add water charges @ 1% on

Add C.P & OH @15% on

162.39
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 18.68
Rs 18.70

Item Code: 13.58

DSR-12

Page 538 of 2298

P/A two coats of fire retardent paint

Code
7240
9999
0131
0114
9999
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS
Fire retardant paint
Carriage of material
LABOUR
Painter
Beldar
Putty, brushes, sand paper etc
Sundries

Rate

litre
L.S.

5.70
1.43

350.00
1.49

Day
Day
L.S.
L.S.

0.54
0.54
6.76
8.06

273.00
247.00
1.49
1.49
Total:
2300.01

Add water charges @ 1% on

Add C.P & OH @15% on

2323.01
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 267.15
Rs 267.15

Item Code: 13.59

Code
9999
0324
9999
0771
0114
9999
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS
Lime
Coal Tar
Carriage of material
Kerosene oil
LABOUR
Beldar
Brushes etc
Sundries

Rate

L.S.
litre
L.S.
litre

1.43
2.80
1.43
0.50

1.49
25.00
1.49
30.00

Day
L.S.
L.S.

0.43
5.33
5.33

247.00
1.49
1.49
Total:
211.35

Add water charges @ 1% on

Add C.P & OH @15% on

213.46
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 24.55
Rs 24.55

Item Code: 13.60.1

Wall painting with plastic emulsion paint - Two or more coats on new work
Code
0835
9999
9999
0131
0115
9999
9999

DSR-12

Description
MATERIALS
Plastic emulsion paint
Materials for filling in holes and cracks (putty etc)
Carriage of material
LABOUR
Painter
Coolie
Brushes, sand paper etc
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
L.S.
L.S.

1.21
6.76
1.43

165.00
1.49
1.49

Day
Day
L.S.
L.S.

0.54
0.54
10.79
6.76

Add water charges @ 1% on

273.00
247.00
1.49
1.49
Total:
518.80

Add C.P & OH @15% on

523.99

Page 539 of 2298

Cost for 10.00 Sqm

Rate per One Sqm:
Rate as per DSR-12:

Rs 60.26
Rs 60.25

Item Code: 13.61.1

Painting with synthetic enamel paint : Two or more coats on new work
Code
0833
9999
9999
0131
0115
9999
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity
litre
1.16
L.S.
5.33
L.S.
1.43
Day
0.54
Day
0.54
L.S.
6.76
L.S.
8.06

Description
Synthetic enamel paint - black / chocolate color.
Materials for filling in holes and cracks (putty etc)
Carriage of material
Painter
Coolie
Brushes, sand paper etc
Sundries

Add water charges @ 1% on

Rate
130.00
1.49
1.49
273.00
247.00
1.49
1.49
Total:
463.75

Add C.P & OH @15% on

468.39
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 53.87
Rs 53.85

Item Code: 13.62.1

Painting with synthetic enamel paint Two or more coats on new work
Code
0823
9999
9999
0131
0115
9999
9999
0833
9999
0131
0115
9999
9999

Description
MATERIALS
Primer
Putty
Carriage
LABOUR
Painter
Coolie
Brushes, sand paper etc
Sundries
MATERIALS
Enamel paint
Carriage of paint and material
LABOUR
Painter
Coolie
Brushes, sand paper etc
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
L.S.
L.S.

0.75
2.73
0.39

85.00
1.49
1.49

Day
Day
L.S.
L.S.

0.25
0.25
5.33
10.79

273.00
247.00
1.49
1.49

litre
L.S.

1.16
1.43

130.00
1.49

Day
Day
L.S.
L.S.

0.54
0.54
6.76
8.06

273.00
247.00
1.49
1.49
Total:
678.23

Add water charges @ 1% on

Add C.P & OH @15% on

685.01
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 78.78
Rs 78.80

Item Code: 13.63.1

Painting with aluminium paint: On new work .

DSR-12

Page 540 of 2298

Code
0826
9999
9999
0131
0115
9999
9999

Description
MATERIALS
Aluminium paint
Carriage of paint and material
Putty etc
LABOUR
Painter
Coolie
Brushes, sand paper etc
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
L.S.
L.S.

0.80
1.43
5.33

115.00
1.49
1.49

Day
Day
L.S.
L.S.

0.54
0.54
6.76
11.96

273.00
247.00
1.49
1.49
Total:
410.76

Add water charges @ 1% on

Add C.P & OH @15% on

414.87
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 47.71
Rs 47.70

Item Code: 13.64.1

Painting with acid proof paint of approved brand : On new work .
Code
0827
9999
9999
0131
0115
9999
9999

Description
MATERIALS
Acid proof paint
Carriage of paint
Putty etc
LABOUR
Painter
Coolie
Brushes, sand paper etc
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
L.S.
L.S.

1.16
1.43
5.33

105.00
1.49
1.49

Day
Day
L.S.
L.S.

0.54
0.54
6.76
8.06

273.00
247.00
1.49
1.49
Total:
434.75

Add water charges @ 1% on

Add C.P & OH @15% on

439.10
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 50.50
Rs 50.50

Item Code: 13.65.1

Painting with black anti-corrosive bitumastic paint : Two or more coats on new work.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
0828
Black anticorrosive bitumastic paint
litre
0.95
9999
Carriage
L.S.
1.43
LABOUR
0131
Painter
Day
0.54
0115
Coolie
Day
0.54
9999
Putty, brushes, sand paper etc
L.S.
5.33
9999
Sundries
L.S.
8.06

DSR-12

Rate
85.00
1.49

Add water charges @ 1% on

273.00
247.00
1.49
1.49
Total:
383.63

Add C.P & OH @15% on

387.47

Page 541 of 2298

Cost for 10.00 Sqm

Rate per One Sqm:
Rate as per DSR-12:

Rs 44.56
Rs 44.55

Item Code: 13.66.1

Floor painting with floor enamel paint : Two or more coats on new work.
Code
0831
9999
9999
0131
0115
9999
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS
Floor enamel paint in all shades
Carriage
Putty etc
LABOUR
Painter
Coolie
Brushes, sand paper etc
Sundries

Rate

litre
L.S.
L.S.

1.48
1.43
5.33

120.00
1.49
1.49

Day
Day
L.S.
L.S.

0.54
0.54
6.76
8.06

273.00
247.00
1.49
1.49
Total:
490.55

Add water charges @ 1% on

Add C.P & OH @15% on

495.46
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 56.98
Rs 57.00

Item Code: 13.67.1

Varnishing with varnish Two or more coats of glue sizing with copal varnish
Code
0856
0763
0857
9999
9999
0131
0115
9999
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS
Undercoat flatting varnish
Glue for sizing
Copal varnish
Carriage
Putty for repair to holes etc
LABOUR
Painter (0.36+0.54=0.90)
Coolie (0.36+0.54=0.90)
Brushes, sand paper etc
Sundries

Rate

litre
kilog
litre
L.S.
L.S.

0.70
0.07
1.16
1.43
5.33

65.00
65.00
125.00
1.49
1.49

Day
Day
L.S.
L.S.

0.90
0.90
6.76
7.15

273.00
247.00
1.49
1.49
Total:
693.84

Add water charges @ 1% on

Add C.P & OH @15% on

700.78
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 80.59
Rs 80.60

Item Code: 13.67.2

Varnishing with varnish Two or more coats glue sizing with spar varnish
Code
0856

DSR-12

Description
MATERIALS
Ordinary varnish

Details of Cost for : 10.00 Sqm

Unit
Quantity
litre

0.70

Rate
65.00

Page 542 of 2298

0763
0858
9999
9999
0131
0115
9999
9999

Glue
Superior spar varnish
Carriage
Repair etc
LABOUR
Painter (0.36+0.54=0.90)
Coolie (0.36+0.54=0.90)
Brushes, sand paper etc
Sundries

kilog
litre
L.S.
L.S.

0.07
1.26
1.43
2.73

65.00
125.00
1.49
1.49

Day
Day
L.S.
L.S.

0.90
0.90
6.76
7.15

273.00
247.00
1.49
1.49
Total:
702.47

Add water charges @ 1% on

Add C.P & OH @15% on

709.49
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 81.59
Rs 81.60

Item Code: 13.68.1

French spirit polishing : Two or more coats on new works including a coat of wood filler.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
1000
Spirit
litre
1.63
9999
Pigment
L.S.
7.15
0999
Shellac
kilog
0.24
9999
Carriage of material
L.S.
2.73
9999
White woolen cloth, putty
L.S.
16.12
9999
Sand paper cotton etc
L.S.
13.39
9999
Lineseed oil
L.S.
1.43
LABOUR
0131
Painter
Day
3.50
9999
Sundries
L.S.
8.06
Add water charges @ 1% on

Rate
65.00
1.49
205.00
1.49
1.49
1.49
1.49
273.00
1.49
Total:
1183.48

Add C.P & OH @15% on

1195.31
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 137.46
Rs 137.45

Item Code: 13.69.1

Polishing on wood work with ready made wax polish : New work.
Code
0855
9999
0131
0115
9999
9999

DSR-12

Description
MATERIALS:
Wax polish (ready made)
Carriage
LABOUR:
Painter
Coolie
Soap, brushes, cloth etc.,
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

kilog
L.S.

0.50
0.39

175.00
1.49

Day
Day
L.S.
L.S.

0.80
0.80
4.16
7.15

Add water charges @ 1% on

273.00
247.00
1.49
1.49
Total:
520.93

Add C.P & OH @15% on

526.14

Page 543 of 2298

Cost for 10.00 Sqm

Rate per One Sqm:
Rate as per DSR-12:

Rs 60.51
Rs 60.50

Item Code: 13.70

Code
0855
0131
0115
9999
9999

Description
MATERIALS
Wax polish
LABOUR
Painter
Coolie
Acetic acid soap, cloth etc
Sundries including Carriage

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

kilog

0.10

175.00

Day
Day
L.S.
L.S.

0.40
0.40
5.33
8.06

273.00
247.00
1.49
1.49
Total:
245.45

Add water charges @ 1% on

Add C.P & OH @15% on

247.90
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 28.51
Rs 28.50

Item Code: 13.71

Code

0829
9999
0131
0115
9999
9999

Description
Detail of cost for 100 letters of 15 cm height
MATERIALS
Paint
Carriage
LABOUR
Painter
Coolie
Painting brushes, turpentine, stencil etc
Sundries

Details of Cost for : 1500.00 units

Unit
Quantity

Rate

litre
L.S.

0.56
0.91

90.00
1.49

Day
Day
L.S.
L.S.

6.00
2.00
13.39
8.06

273.00
247.00
1.49
1.49
Total:
2215.72

Add water charges @ 1% on

Add C.P & OH @15% on

2237.88
Cost for 1500.00 units
Rate per Units:
Rate as per DSR-12:

Rs 1.72
Rs 1.70

Item Code: 13.72

Washed stone grit plaster on exterior walls of height upto 10 M. above level in two layers, under layer 12mm CP 1:4

Code
03.009

0155
0114
0101

DSR-12

Description
MATERIALS
Cement mortar 1:4 (1 cement : 4 coarse sand).
Cement mortar 1:4(1 cement: 4 coarse sand).
LABOUR
Mason
Beldar
Bhisti

Details of Cost for : 10.00 Sqm

Unit
Quantity

Day
Day
Day

Rate

0.144

3485.41

0.67
0.75
0.92

287.00
247.00
260.00

Page 544 of 2298

9999
0367
2209
0114

2911
2202
0982
2203
0367
2209
0114
0101
9999
9999
0123
0114
0101
9999
0123
0115
9999

Scaffolding
L.S.
Applying cement slurry
Cement
tonne
Carriage
tonne
Beldar
Day
Top layer 15 mm thick stone chipping plaster
Quantity required = 0.172 cum including wastage
Preparation of cement concrete mix 1:1/2:2 (1 cement: 1/2
coarse sand : 2 stone chipping 10 mm nominal size)
Stone chippings 10 mm nominal size
cum
Carriage of Stone chipping 10 mm nominal size
cum
Coarse sand
cum
Carriage of Coarse sand
cum
Cement
tonne
Carriage of Cement
tonne
Beldar
Day
Bhisti
Day
Hire and running charges of mechanical mixer
L.S.
Sundries
L.S.
LABOUR
Mason 1 st class
Day
Beldar
Day
Bhisti
Day
Scaffolding
L.S.
Labour for washing
Mason 1st class
Day
Coolie
Day
Sundries soft brushes etc
L.S.

8.97

1.49

0.02
0.02
0.25

5000.00
77.87
247.00

0.14
0.14
0.04
0.04
0.10
0.10
0.10
0.05
4.29
2.08

1050.00
87.60
1120.00
87.60
5000.00
77.87
247.00
260.00
1.49
1.49

1.75
1.75
0.30
24.44

301.00
247.00
260.00
1.49

1.00
0.50
25.22

301.00
247.00
1.49
Total:
3593.36

Add water charges @ 1% on

Add C.P & OH @15% on

3629.29
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 417.37
Rs 417.35

Item Code: 13.73.1

Forming groove on top layer of washed stone grit plaster 15 x 15 mm groove.
Details of Cost for : 30.00 m
Code
Description
Unit
Quantity
Second class kail wood in plank 30 x0.015
x0.015m=6.75cudmvWastage@ 10%= 0.68
Total = 7.43 cudm
Assuming that the battens shall become unserviceable after
using 5 times
Cost for using once
MATERIALS
1198
Second class kail wood in planks
cum
0.00148
9999
Carriage of wood
L.S.
0.39
Labour for making battens
0112
Carpenter 2nd class
Day
0.15
0114
Beldar
Day
0.15
9999
Sundries
L.S.
2.86
Labour for nailing the battens to under layer and finishing and
repairing grooves
0123
Mason 1 st class
Day
0.70
0114
Beldar
Day
0.70

DSR-12

Rate

25000.00
1.49
273.00
247.00
1.49

301.00
247.00

Page 545 of 2298

9999

Nails and cement mortar

L.S.

71.76

Add water charges @ 1% on

1.49
Total:
610.36

Add C.P & OH @15% on

616.46
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 23.63
Rs 23.65

Item Code: 13.73.2

Forming groove on top layer of washed stone grit plaster 20 x 15 mm groove.
Details of Cost for : 30.00 m
Code
Description
Unit
Quantity
Second class kail wood in plank 30 x0.02
x0.015m =9.00 cudm
Wastage 10%= 0.90
Total = 9.90 cudm
Assuming that the battens shall become unserviceable after
using 5 times
Cost for using once
MATERIALS
1198
Second class kail wood in planks
cum
0.00198
9999
Carriage of wood
L.S.
0.52
Labour for making battens
0112
Carpenter 2nd class
Day
0.15
0114
Beldar
Day
0.15
9999
Sundries
L.S.
2.86
Labour for nailing the battens to under layer and finishing and
repairing grooves
0123
Mason 1st class
Day
0.70
0114
Beldar
Day
0.70
9999
Nails and cement mortar
L.S.
71.76
Add water charges @ 1% on

Rate

25000.00
1.49
273.00
247.00
1.49

301.00
247.00
1.49
Total:
623.05

Add C.P & OH @15% on

629.28
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 24.12
Rs 24.10

Item Code: 13.74

Extra for washed grit plaster above 10m for 3 m or part thereof
Code
9999
0123
0114
0101
9999

Description
MATERIALS
Scaffolding
Mason 1st class
Beldar
Bhisti
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
L.S.
Day
Day
Day
L.S.

215.28
0.30
0.30
0.15
28.60

Add water charges @ 1% on

Rate
1.49
301.00
247.00
260.00
1.49
Total:
566.78

Add C.P & OH @15% on

572.45
Cost for 10.00 Sqm

DSR-12

Page 546 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 65.83
Rs 65.85

Item Code: 13.75

Extra for washed grit plaster on circular work
Code
0123
0114
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
LABOUR
Mason 1st class
Beldar
Sundries

Day
Day
L.S.

0.50
0.50
53.82

Add water charges @ 1% on

Rate
301.00
247.00
1.49
Total:
354.19

Add C.P & OH @15% on

357.73
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 41.14
Rs 41.15

Item Code: 13.76

Forming groove on surface of plaster of uniform size 12x12 mm to 25x15 mm size including providing aluminium channels

Code

Details of Cost for : 30.00 m

Unit
Quantity

Description

Rate

MATERIALS:
Aluminium channel section 15x15x2 mm weight 0.221kg/m

7306
9999
0117
0114
9999
9999

Qty = 30 + 5% wastage =31.50m @ 0.221 kg/m

=6.96 kg
Aluminium T or L sections
Carriage of material
LABOUR: FOR FIXING
Assistant Fitter or 2nd class Fitter
Beldar
Sundries
Nails and cement mortar

kilog
L.S.

6.96
38.98

220.00
1.49

Day
Day
L.S.
L.S.

0.46
0.15
2.86
71.76

273.00
247.00
1.49
1.49
Total:
1863.09

Add water charges @ 1% on

Add C.P & OH @15% on

1881.72
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 72.13
Rs 72.15

Item Code: 13.77

Extra for using white cement in top layers of washed stone grit plaster
Code
0368
0367

DSR-12

Description
MATERIALS
(A) Add for White Cement
(B) Duduct for Ordinary Cement

Details of Cost for : 10.00 Sqm

Unit
Quantity
tonne
tonne

0.10
-0.10

Rate

Add water charges @ 1% on

12000.00
5000.00
Total:
700.00

Add C.P & OH @15% on

707.00

Page 547 of 2298

Cost for 10.00 Sqm

Rate per One Sqm:
Rate as per DSR-12:

Rs 81.31
Rs 81.30

Item Code: 13.78

P/F applying 12 mm thick (ave) premixed formulated one coat gypsum light weight plaster.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
0868
Premixed super white gypsum plaster @ 16.14kg /sqm = kg
169.47
161.40 + 5% wastage =
161.40+8.07= 169.47 kg.
LABOUR
0155
Mason
Day
1.20
0115
Coolie
Day
1.20
9999
Scaffolding and sundries
L.S.
12.61
Add water charges @ 1% on

Rate
7.00

287.00
247.00
1.49
Total:
1845.88

Add C.P & OH @15% on

1864.34
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 214.40
Rs 214.40

Item Code: 13.79

Extra for addition of synthetic polyester triangular fibre in cement plaster/mortar..
Details of Cost for : 1.00 units
Code
Description
Unit
Quantity
MATERIALS:
8733
Synthetic Polyester triangular fibre of length 6 mm, effective kg
0.125
diameter 10-40 microns an
Add water charges @ 1% on

Rate
365.00
Total:
45.63

Add C.P & OH @15% on

46.09
Cost for 1.00 units
Rate per Units:
Rate as per DSR-12:

Rs 53.00
Rs 53.00

Item Code: 13.80

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the
plastered wall surface to prepare the surface even and smooth complete.

Code
0824

9999
0122
0114

DSR-12

Description
MATERIALS:
Cement base wall care putty
Qty : 10x0.001x1429 = 14.29 kg
Add wastage 2% = 0.29 kg
Total = 14.58 kg
Carriage of putty
LABOUR:
Mason (for plaster of paris work) 1st class
Beldar

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Kg

14.58

23.50

L.S.

3.90

1.49

Day
Day

0.45
0.45

301.00
247.00

Page 548 of 2298

9999

Scaffoldings and Sundries

L.S.

40.00

Add water charges @ 1% on

1.49
Total:
654.64

Add C.P & OH @15% on

661.19
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 76.04
Rs 76.05

Item Code: 13.81.1

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre,
including applying additional coats wherever required, to achieve even shade and colour. - One coat

Code
0802
9999
9999
0131
0115
9999

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

MATERIALS:
Acrylic distemper 1st quality , having VOC content less than Kg
50 gm/litre
Brushes, putty etc.
L.S.
Sundries including carriage
L.S.
LABOUR:
Painter
Day
Coolie
Day
Sundries
L.S.

Rate

0.62

38.00

0.52
10.79

1.49
1.49

0.33
0.17
7.15

273.00
247.00
1.49
Total:
183.14

Add water charges @ 1% on

Add C.P & OH @15% on

184.97
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 21.27
Rs 21.25

Item Code: 13.81.2

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre,
including applying additional coats wherever required, to achieve even shade and colour. - Two coats

Code
0802
9999
9999
0131
0115
9999

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

MATERIALS:
Acrylic distemper 1st quality , having VOC content less than Kg
50 gm/litre
Brushes, putty etc.
L.S.
Sundries including carriage
L.S.
LABOUR:
Painter
Day
Coolie
Day
Sundries
L.S.

Rate

0.99

38.00

11.57
4.42

1.49
1.49

0.40
0.46
8.06

273.00
247.00
1.49
Total:
296.28

Add water charges @ 1% on

Add C.P & OH @15% on

299.24
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 34.41
Rs 34.40

Page 549 of 2298

Item Code: 13.82.1

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre -One coat

Code
0803
9999
9999
0131
0115
9999
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS:
Acrylic emulsion , having VOC content less than 50 gm/litre
Material for filling holes, cracks (putty) etc
Carriage of material
LABOUR:
Painter
Coolie
Brushes, sand paper etc.,
Sundries

Rate

Ltr

0.53

200.00

L.S.
L.S.

0.52
5.33

1.49
1.49

Day
Day
L.S.
L.S.

0.36
0.36
8.06
6.76

273.00
247.00
1.49
1.49
Total:
323.99

Add water charges @ 1% on

Add C.P & OH @15% on

327.23
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 37.63
Rs 37.65

Item Code: 13.82.2

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre -Two coats

Code
0803
9999
9999
0131
0115
9999
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS:
Acrylic emulsion , having VOC content less than 50 gm/litre
Carriage of material
Brushes, putty etc.,
LABOUR:
Painter
Coolie
Brushes, sand paper etc.,
Sundries

Rate

Ltr

0.84

200.00

L.S.
L.S.

6.76
1.43

1.49
1.49

Day
Day
L.S.
L.S.

0.54
0.54
10.79
6.76

273.00
247.00
1.49
1.49
Total:
487.15

Add water charges @ 1% on

Add C.P & OH @15% on

492.02
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 56.58
Rs 56.60

Item Code: 13.83.1

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50
grams/ litre. - One coat
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
0804
Premium acrylic emulsion of interior grade, having VOC Ltr
0.38
350.00
content less than 50 gm/ltr.
9999
Material for filling holes, cracks (putty) etc.,
L.S.
0.52
1.49

DSR-12

Page 550 of 2298

9999
0131
0115
9999
9999

Carriage of material
LABOUR:
Painter
Coolie
Brushes, sand paper etc.,
Sundries

L.S.

5.33

1.49

Day
Day
L.S.
L.S.

0.36
0.36
8.06
6.76

273.00
247.00
1.49
1.49
Total:
350.99

Add water charges @ 1% on

Add C.P & OH @15% on

354.50
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 40.77
Rs 40.75

Item Code: 13.83.2

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50
grams/ litre. - Two coats
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
0804
Premium acrylic emulsion of interior grade, having VOC Ltr
0.60
350.00
content less than 50 gm/ltr.
9999
Material for filling holes, cracks (putty) etc.,
L.S.
6.76
1.49
9999
Carriage of material
L.S.
1.43
1.49
LABOUR:
0131
Painter
Day
0.54
273.00
0115
Coolie
Day
0.54
247.00
9999
Brushes, sand paper etc.,
L.S.
10.79
1.49
9999
Sundries
L.S.
6.76
1.49
Total:
Add water charges @ 1% on
529.15
Add C.P & OH @15% on
534.44
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 61.46
Rs 61.45

Item Code: 13.84.1

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre - One coat

Code
0805
9999
0131
0115
9999
9999
9999

DSR-12

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

MATERIALS:
Synthetic enamel paint , having VOC (Volatile Organic Ltr
Compound) content less than 150 gm/l
Material for filling holes, cracks (putty) etc.,
L.S.
LABOUR:
Painter
Day
Coolie
Day
Putty
L.S.
Brushes, sand paper etc.,
L.S.
Sundries
L.S.

Rate

0.53

180.00

0.52

1.49

0.36
0.36
2.73
5.33
8.06

Add water charges @ 1% on

273.00
247.00
1.49
1.49
1.49
Total:
307.39

Add C.P & OH @15% on

310.46

Page 551 of 2298

Cost for 10.00 Sqm

Rate per One Sqm:
Rate as per DSR-12:

Rs 35.70
Rs 35.70

Item Code: 13.84.2

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre - Two coats

Code
0805
9999
9999
0131
0115
9999
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description

MATERIALS:
Synthetic enamel paint , having VOC (Volatile Organic Ltr
Compound) content less than 150 gm/l
Carriage of material
L.S.
Material for filling holes, cracks (putty) etc.,
L.S.
LABOUR:
Painter
Day
Coolie
Day
Brushes, sand paper etc.,
L.S.
Sundries
L.S.

Rate

0.84

180.00

1.43
5.33

1.49
1.49

0.54
0.54
6.76
8.06

273.00
247.00
1.49
1.49
Total:
464.15

Add water charges @ 1% on

Add C.P & OH @15% on

468.79
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 53.91
Rs 53.90

Item Code: 13.85.1

Applying priming coats with primer having low VOC (Volatile Organic Compound ) content. - With ready mixed pink or grey primer
on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Code
0806
9999
9999
0131
0115
9999
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS:
Ready mixed pink or grey primer on wood work (hard and soft
wood) having VOC content less
Putty
Carriage of material
LABOUR:
Painter
Coolie
Brushes, sand paper etc.,
Sundries

Rate

Ltr

0.75

103.00

L.S.
L.S.

2.73
0.39

1.49
1.49

Day
Day
L.S.
L.S.

0.25
0.25
5.33
10.79

273.00
247.00
1.49
1.49
Total:
235.92

Add water charges @ 1% on

Add C.P & OH @15% on

238.28
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 27.40
Rs 27.40

Item Code: 13.85.2

DSR-12

Page 552 of 2298

Applying priming coats with primer having low VOC (Volatile Organic Compound ) content. -With ready mixed red oxide zinc
chromatic on steel /iron works having VOC content less than 250 grams/litre.

Code
0807
9999
0131
0115
9999

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

MATERIALS:
Ready mixed red oxide zinc chromatic on steel/ iron work, Ltr
having VOC content less than 250
Carriage of material
L.S.
LABOUR:
Painter
Day
Coolie
Day
Brushes, sand paper etc.,
L.S.

Rate

0.54

125.00

0.52

1.49

0.24
0.24
10.79

273.00
247.00
1.49
Total:
209.15

Add water charges @ 1% on

Add C.P & OH @15% on

211.24
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 24.29
Rs 24.30

Item Code: 13.85.3

Applying priming coats with primer having low VOC (Volatile Organic Compound ) content. -With water thinnable cement primer on
wall surface having VOC content less than 50 grams/litre.

Code
0808A
9999
0131
0115
9999

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

MATERIALS:
Water thinnable cement primer for interior wall surface, Ltr
having VOC content less than 50 g
Carriage of material
L.S.
LABOUR:
Painter
Day
Coolie
Day
Brushes, sand paper etc.,
L.S.

Rate

0.70

55.00

8.06

1.49

0.40
0.20
7.15

273.00
247.00
1.49
Total:
219.76

Add water charges @ 1% on

Add C.P & OH @15% on

221.96
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 25.53
Rs 25.55

Item Code: 14.1.1

Repairs to plaster of thickness 12mm to 20mm : With cement mortar 1:4 (1 cement : 4 fine sand)
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS:
03.004
Cement mortar 1:4 (1 cement : 4 fine sand)
Cum
0.183
LABOUR :
0155
Mason (avge)
Day
1.21
0115
Coolie
Day
1.29
0114
Beldar
Day
0.54
0101
Bhisthi
Day
0.92
9999
Scaffolding and sundries
L.S.
15.21

DSR-12

Rate
2971.81
287.00
247.00
247.00
260.00
1.49
Total:

Page 553 of 2298

Add water charges @ 1% on

1604.98

Add C.P & OH @15% on

1621.03
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 186.42
Rs 186.40

Item Code: 14.1.2

Repairs to plaster of 12 mm to 20 mm in patches of areas 2.50 Sqm and under : With cement mortar 1 : 4 (1 cement : 4 coarse
sand).
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
03.009
Cement mortar 1:4 (1 cement : 4 coarse sand).
0.183
3485.41
(Rate as per item No 3.9)
LABOUR
0155
Mason
Day
1.21
287.00
0115
Coolie
Day
1.29
247.00
0114
Beldar
Day
0.54
247.00
0101
Bhisti
Day
0.92
260.00
9999
Scaffolding and sundries
L.S.
15.21
1.49
Total:
Add water charges @ 1% on
1698.97
Add C.P & OH @15% on
1715.96
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 197.34
Rs 197.35

Item Code: 14.2.1

Fixing chowkhats in existing opening : Door chowkhat.
Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0130
0123
0124
0128
9999
9999
9999
03.006
9999
9999
9999
0155
0114

DSR-12

Description
20 mm nominal size stone Aggregate
10 mm nominal size stone Aggregate
Carriage of Stone aggregate
Coarse sand
Carriage of Coarse sand
Cement
Carriage of Cement
Beldar
Coolie
Mistry
Mason (brick layer) 1 st class
Mason 2nd class
Mate
Scaffolding
Hire and running charges of mechanical mixer
Sundries
Cement mortar 1:6 (1 cement : 6 fine sand)
(Rate as per item no. 3.6)
Cement concrete 1:2:4 filled in chase cut
Painting two coats of coaltar
Disposal of mulba
Mason (average)
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity
cum
0.021
cum
0.0072
cum
0.0282
cum
0.0141
cum
0.0141
tonne
0.0066
tonne
0.0066
Day
0.027
Day
0.0195
Day
0.0084
Day
0.0018
Day
0.0018
Day
0.0012
L.S.
1.43
L.S.
0.78
L.S.
0.39
0.01
L.S.
L.S.
L.S.
Day
Day

24.18
13.52
1.82
0.50
0.75

Rate
1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87
247.00
247.00
301.00
301.00
273.00
260.00
1.49
1.49
1.49
2311.69
1.49
1.49
1.49
287.00
247.00

Page 554 of 2298

9999

Sundries

L.S.

2.73

Add water charges @ 1% on

1.49
Total:
516.67

Add C.P & OH @15% on

521.84
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 600.12
Rs 600.10

Item Code: 14.2.2

Fixing chowkhats in existing opening : Windows chowkhat.
Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0130
0123
0124
0128
9999
9999
9999
03.006
9999
9999
0155
0114

Details of Cost for : 1.00 No.

Unit
Quantity
cum
0.014
cum
0.0048
cum
0.0188
cum
0.0094
cum
0.0094
tonne
0.0044
tonne
0.0044
Day
0.018
Day
0.013
Day
0.0056
Day
0.0012
Day
0.0012
Day
0.0008
L.S.
0.91
L.S.
0.52
L.S.
0.26
0.006

Description
20 mm nominal size stone Aggregate
10 mm nominal size stone Aggregate
Carriage of Stone aggregate
Coarse sand
Carriage of Coarse sand
Cement
Carriage of Cement
Beldar
Coolie
Mistry
Mason 1 st class
Mason 2nd class
Mate
Scaffolding and sundries
Hire and running charges of mechanical mixer
Sundries
Cement mortar 1:6 (1 cement : 6 fine sand)
Rate as per item No. 3.6
Cement concrete 1:2:4
Painting two coats of coaltar
Mason
Beldar

L.S.
L.S.
Day
Day

9.88
0.91
0.33
0.50

Add water charges @ 1% on

Rate
1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87
247.00
247.00
301.00
301.00
273.00
260.00
1.49
1.49
1.49
2311.69
1.49
1.49
287.00
247.00
Total:
316.01

Add C.P & OH @15% on

319.17
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 367.05
Rs 367.05

Item Code: 14.2.3

Fixing chowkhats in existing opening : Clerestory windows chowkhat.
Code
0295
0297
2202
0982
2203
0367
2209
0114

DSR-12

Description
MATERIALS:
Stone Aggregate (Single size) : 20 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Carraige of Stone aggregate below 40 mm nominal size
Coarse sand (zone III)
Carraige of Coarse sand
Portland Cement
Carraige of Cement
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity
cum
cum
cum
cum
cum
tonne
tonne
Day

0.007
0.0024
0.0094
0.0047
0.0047
0.0022
0.0022
0.009

Rate
1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87
247.00

Page 555 of 2298

0115
0130
0123
0124
0128
9999
9999
9999
03.006
9999
9999
0155
0114
9999

Coolie
Mistry
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Mate
Scaffolding and sundries
Hire and running charges of mechanical mixer
Sundries
Cement mortar 1:6 (1 cement : 6 fine sand)
(Rate as per item No. 3.6)
Cement concrete 1:2:4 filled in chase cut
Painting two coats of coaltar
Mason (average)
Beldar
Sundries

Day
Day
Day
Day
Day
L.S.
L.S.
L.S.
Cum
L.S.
L.S.
Day
Day
L.S.

0.0065
0.0028
0.0006
0.0006
0.0004
0.52
0.26
0.13
0.003

247.00
301.00
301.00
273.00
260.00
1.49
1.49
1.49
2311.69

8.06
0.91
0.17
0.50
2.73

1.49
1.49
287.00
247.00
1.49
Total:
230.66

Add water charges @ 1% on

Add C.P & OH @15% on

232.97
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 267.92
Rs 267.90

Item Code: 14.3

Fixing chowkhat in existing opening in brick/RCC wall with desh fasteners.
Code
0114
0115
0130
0128
9999
7019
9999

Details of Cost for : 1.00 No.

Unit
Quantity

Description
Beldar
Coolie
Mistry
Mate
Disposal of mulba
Dash fastener
Dash fastener / Chemical fastner

Day
Day
Day
Day
L.S.
each
L.S.

0.027
0.0195
0.0084
0.0012
1.82
6.00
12.22

Add water charges @ 1% on

Rate
247.00
247.00
301.00
260.00
1.49
13.00
1.49
Total:
113.25

Add C.P & OH @15% on

114.38
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 131.54
Rs 131.55

Item Code: 14.4.1

Making the opening in brick masonry including dismantling, floor, walls: For door/ window/ clerestory window.

Code

Description

Details of Cost for : 1.89 Sqm

Unit
Quantity

Rate

LABOUR:
Details of cost for 1 opening of size 0.90 X 2.10=1.89 sqm.
03.006
9999
0124

DSR-12

Cement mortar 1:6 (1 cement : 6 fine sand)

Rate as per item no. 3.6
Cement concrete 1:2:4 filled in chase cut
LABOUR:
Mason 2nd class

0.01

2311.69

L.S.

24.57

1.49

Day

0.50

273.00

Page 556 of 2298

0114
0115
9999

Beldar
Coolie
Scaffolding and Sundries

Day
Day
L.S.

1.20
0.40
3.50

Add water charges @ 1% on

247.00
247.00
1.49
Total:
596.65

Add C.P & OH @15% on

602.62
Cost for 1.89 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 366.67
Rs 366.65

Item Code: 14.5.1

Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4 mm
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
MATERIALS:
2406
Glass panes - 1.00 sqm + 10% wastate= 1.10 Sqm
sqm
1.10
9999
Carriage including sundries
L.S.
1.82
0863
Putty for wood work
kilog
0.68
9999
Painting or varnishing or beewaxing
L.S.
5.33
9999
Sundries Nails etc.
L.S.
6.76
LABOUR :
0119
Glazier
Day
0.23
0114
Beldar
Day
0.23
9999
Sundries such as Rag, cotton etc
L.S.
1.43
Add water charges @ 1% on

Rate

310.00
1.49
30.00
1.49
1.49
273.00
247.00
1.49
Total:
503.85

Add C.P & OH @15% on

508.89
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 585.22
Rs 585.20

Item Code: 14.5.2

Renewing glass panes with putty, nails : Float Glass 5.5mm thick.
Code
2407
9999
0863
9999
9999
0119
0114
9999

Details of Cost for : 1.00 Sqm

Unit
Quantity

Description
MATERIALS:
Float glass sheet of nominal thickness 5.5 mm.(weight not less
than 13.50 kg/sqm).
Carriage including sundries
Putty for wood work
Painting or varnishing or beewaxing
Sundries Nails etc.
Glazier
Beldar
Sundries such as Rag, cotton etc

Rate

sqm

1.10

450.00

L.S.
kilog
L.S.
L.S.
Day
Day
L.S.

1.82
0.68
5.33
6.76
0.23
0.23
1.43

1.49
30.00
1.49
1.49
273.00
247.00
1.49
Total:
657.85

Add water charges @ 1% on

Add C.P & OH @15% on

664.43
Cost for 1.00 Sqm

DSR-12

Page 557 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 764.09
Rs 764.10

Item Code: 14.6.1

Renewing glass panes with wooden fillets :_x000D__x000D_Float Glass panes 4 mm thick._x000D_
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
2406
Glass panes =1 sqm + 0.1 sqm (wastage @
sqm
1.10
10%)=1.10 sqm.
Wooden fillets 1189
Second class teak wood in scantling
cum
0.00025
1194
Second class deodar wood in planks
cum
0.00025
1196
First class kail wood in planks
cum
0.00025
9999
Painting or varnishing or beewaxing
L.S.
4.42
9999
Sundries Nails etc.
L.S.
2.73
0112
Carpenter 2nd class
Day
0.20
0119
Glazier
Day
0.25
0114
Beldar
Day
0.45
9999
Sundries such as Rag, cotton etc
L.S.
1.82
Add water charges @ 1% on

Rate
310.00

64000.00
48000.00
30000.00
1.49
1.49
273.00
273.00
247.00
1.49
Total:
623.87

Add C.P & OH @15% on

630.11
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 724.63
Rs 724.65

Item Code: 14.6.2

Renewing glass panes with wooden fillets :_x000D_
Code
2407

1189
1194
1196
9999
9999
0112
0119
0114
9999

Details of Cost for : 1.00 Sqm

Unit
Quantity

Description
MATERIALS
Float glass sheet of nominal thickness 5.5 mm.(weight not less
than 13.50 kg/sqm).
10%)=1.10 sqm.
Wooden fillets Second class teak wood in scantling
Second class deodar wood in planks
First class kail wood in planks
Painting or varnishing or beewaxing
Sundries Nails etc.
Carpenter 2nd class
Glazier
Beldar
Sundries such as Rag, cotton etc

Rate

sqm

1.10

450.00

cum
cum
cum
L.S.
L.S.
Day
Day
Day
L.S.

0.00025
0.00025
0.00025
4.42
2.73
0.20
0.25
0.45
1.82

64000.00
48000.00
30000.00
1.49
1.49
273.00
273.00
247.00
1.49
Total:
777.87

Add water charges @ 1% on

Add C.P & OH @15% on

785.65
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 903.50
Rs 903.50

Item Code: 14.7.1

DSR-12

Page 558 of 2298

Renewing glass panes with existing wooden _x000D_

Code

2406
9999
9999
9999
0119
0114
9999

Description
Details of cost for 10 glasses area each 0.10 sqm.
MATERIALS
Glass panes = 1.00 sqm
Add Wastage @ 10% = 0.l0sqm
Total = 1.10 sqm
Carriage of glasspanes and other materials
Sundries Nails etc.
Methylated spirit
Glazier
Beldar
Sundries

Details of Cost for : 1.00 Sqm

Unit
Quantity

sqm
L.S.
L.S.
L.S.
Day
Day
L.S.

1.10
2.73
9.88
5.33
0.30
0.30
1.43

Add water charges @ 1% on

Rate

310.00
1.49
1.49
1.49
273.00
247.00
1.49
Total:
525.86

Add C.P & OH @15% on

531.12
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 610.79
Rs 610.80

Item Code: 14.7.2

Renewing glass panes with existing wooden _x000D_
Code

2407
9999
9999
9999
0119
0114
9999

Description
Details of cost for 10 glasses area each 0.10 sqm.
MATERIALS
Glass panes = 1.00 sqm
Add Wastage @ 10% = 0.1 sqm
Total = 1.10 sqm
Carriage of glasspanes and other materials
Sundries Nails etc.
Methylated spirit
Glazier
Beldar
Sundries

Details of Cost for : 1.00 Sqm

Unit
Quantity

sqm
L.S.
L.S.
L.S.
Day
Day
L.S.

1.10
2.73
9.88
5.33
0.30
0.30
1.43

Add water charges @ 1% on

Rate

450.00
1.49
1.49
1.49
273.00
247.00
1.49
Total:
679.86

Add C.P & OH @15% on

686.66
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 789.66
Rs 789.65

Item Code: 14.8.1

S/F new wooden fillets :Ist class teak wood._x000D_
Code

1190
9999

DSR-12

Description
Details of cost for 10.00 metres length
MATERIALS
2nd class teak wood in planks
10.00x0.01x0.01 = 1.00 cudm
Add 15% wastage = 0.15 cudm
Second class teak wood in planks
Nails

Details of Cost for : 10.00 m

Unit
Quantity

cum
L.S.

0.00115
26.91

Rate

72000.00
1.49

Page 559 of 2298

0112
0114
9999

LABOUR
Carpenter 2nd class
Beldar
Sundries

Day
Day
L.S.

0.25
0.25
2.73

Add water charges @ 1% on

273.00
247.00
1.49
Total:
256.97

Add C.P & OH @15% on

259.54
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 29.85
Rs 29.85

Item Code: 14.8.2

S/F new wooden fillets :Hollock wood fillets._x000D_
Code

2466
9999
0112
0114
9999

Description
Details of cost for 10 metres length
MATERIALS
Hollock wood in scantling
10.00x0.01x0.01 = 1.00 cudm
Add 15% wastage =0.15 cudm
Hollock wood in scantling
Nails
LABOUR
Carpenter 2nd class
Beldar
Sundries

Details of Cost for : 10.00 m

Unit
Quantity

Rate

cum
L.S.

0.00115
26.91

31000.00
1.49

Day
Day
L.S.

0.25
0.25
2.73

273.00
247.00
1.49
Total:
209.82

Add water charges @ 1% on

Add C.P & OH @15% on

211.92
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 24.37
Rs 24.35

Item Code: 14.9

Renewal of old putty of glass panes._x000D_
Code

0863
9999
9999
0112
0114
9999

Description
Details of cost for 13.00 metres length
MATERIALS
Cost of putty
Nails
Spirit
LABOUR
Carpenter 2nd class
Beldar
Sundries L.S.

Details of Cost for : 13.00 m

Unit
Quantity

Rate

kilog
L.S.
L.S.

0.68
7.15
2.73

30.00
1.49
1.49

Day
Day
L.S.

0.30
0.30
1.43

273.00
247.00
1.49
Total:
193.25

Add water charges @ 1% on

Add C.P & OH @15% on

195.18
Cost for 13.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 17.27
Rs 17.25

Page 560 of 2298

Item Code: 14.10

Refixing old glass panes with putty and nails
Code
0863
9999
9999
0119
0114
9999

Description
MATERIALS:
Putty for wood work
Spirit
Nails
LABOUR:
Glazier
Beldar
Sundries

Details of Cost for : 1.00 Sqm

Unit
Quantity

Rate

kilog
L.S.
L.S.

0.68
2.73
7.15

30.00
1.49
1.49

Day
Day
L.S.

0.30
0.30
1.43

273.00
247.00
1.49
Total:
193.25

Add water charges @ 1% on

Add C.P & OH @15% on

195.18
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 224.46
Rs 224.45

Item Code: 14.11

Fixing old glass with wooden fillets._x000D_
Code

0119
0114
9999
9999

Description
Details of cost for 1.00 sqm
LABOUR
Glazier
Beldar
Sundries
Nails

Details of Cost for : 1.00 Sqm

Unit
Quantity

Day
Day
L.S.
L.S.

0.30
0.30
1.43
3.90

Add water charges @ 1% on

Rate

273.00
247.00
1.49
1.49
Total:
163.94

Add C.P & OH @15% on

165.58
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 190.42
Rs 190.40

Item Code: 14.12

P/f 16 mm M.S. Fan clamps of standard shape and_x000D_size in existing R.C.C. slab._x000D_
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost for each fan clamp.
MATERIALS
1003
M.S.bar 16mm dia = 40cm (including qtl
quint
0.0063
wastage) @ 1.58 Kg/m = 0.632 Kg
9999
Cement concrete 1:2:4 (1 Cement: 2 Coarse
L.S.
13.52
sand : 4 graded stone aggregate 20mm
nominal size) mortar for rendering or
plastering
9999
Painting two or more coats to exposed portion
L.S.
7.15
of the clamp including priming coat
Labour for fixing
0102
Blacksmith 1st class
Day
0.03

DSR-12

Rate

4000.00
1.49

1.49

301.00

Page 561 of 2298

0124
0114
9999

Mason 2nd class

Beldar
Sundries

Day
Day
L.S.

0.12
0.25
2.73

Add water charges @ 1% on

273.00
247.00
1.49
Total:
163.60

Add C.P & OH @15% on

165.24
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 190.03
Rs 190.10

Item Code: 14.13

Regrading terracing of mud phaska covered with tiles or bricks
Code

0155
0114

0155

03.018
0308
03.018
0114

03.003

0155
0114
0101
9999
9999

Description
Details of cost for 10.00 sqm
(i) Dismantling tiles/bricks in cement mortar
including removing mud plaster and cleaning
the tiles/bricks
LABOUR
Mason (average))
Beldar
(ii) Preparing the surface, for mud phuska to
proper slope, relaying mud plaster gobri
leeping.
Mason (average))
25mm thick mud plaster including gobri
leaping
MATERIALS
Mud mortar
Bhusa
Mud mortar
LABOUR
Beldar
Relaying of tiles / bricks including Cement Mortar 1:3 (1
cement : 3 fine sand) for grouting
Cement mortar 1:3 (1 cement : 3 fine sand)
(Rate as per item code 3.3)
LABOUR
Mason (average)
Beldar
Bhisti
Disposal of mulba
(i) Dismantling tiles/bricks in cement mortar including
removing mud plaster and cleanin

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Day
Day

0.54
0.54

287.00
247.00

Day

0.27

287.00

Cum
quint
Cum

0.24
0.084
0.12

301.12
375.00
301.12

Day

0.25

247.00

Cum

0.061

3631.93

Day
Day
Day
L.S.
L.S.

1.20
1.50
1.00
5.33
2.73

287.00
247.00
260.00
1.49
1.49

Add water charges @ 1% on

Total:
1775.96

Add C.P & OH @15% on

1793.72
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 206.28
Rs 206.30

Item Code: 14.14.1

Replacing sand stone slabs in roofing laid in CM 1: 4 CS : Red/ White sand stone slabs 30 to 50 mm thick.
Details of Cost for : 10.00 Sqm

DSR-12

Page 562 of 2298

Code

0114
0115
9999
9999
1174
2216
03.009

03.003
0155
0100
0115
0101
9999
2264

Description
Unit
Dismantling existing stone, slabs roofing 1x10.00 sqmx0.05m
= 0.50 cum.
Beldar
Day
Coolie
Day
Sundries
L.S.
L.S.
sqm
Carriage of Stone slabs
tonne
Cement mortar 1:4 (1 cement : 4 coarse sand).
(Rate as per item No. 3.9 of SH - Mortar)
Cement mortar 1:3 (1 cement :3 fine sand).
Cement mortar 1:3 (1 cement : 3 fine sand)
Mason
Day
Bandhani
Day
Coolie
Day
Bhisti
Day
Sundries
L.S.
Carriage of Rubbish
cum

Quantity

Rate

0.885
0.375
4.03
40.43
11.00
1.41
0.0105

247.00
247.00
1.49
1.49
165.00
77.87
3485.41

0.0075
1.69
2.03
1.69
0.34
16.12
0.50

3631.93
287.00
260.00
247.00
260.00
1.49
87.60
Total:
3952.59

Add water charges @ 1% on

Add C.P & OH @15% on

3992.12
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 459.09
Rs 459.10

Item Code: 14.15.1

Renewing wooden battens in roofs, i/c making good the holes in wall and painting with oil type wood preserva- tive : Sal wood
battens.
Details of Cost for : 0.30 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for 10 battens i.e. 300 cudm 3 metres long of
100x100mm
10x3x0.1x0.1 = 0.3cum =300cudm
Add wastage @ 2%= 6 cudm, Total = 306.00 cudm
MATERIALS
1199
Sal wood battens
cum
0.306
50000.00
2204
Carriage of battens
cum
0.306
100.11
LABOUR
Taking out the existing battens and refixing new one including
supporting the roof
0112
Carpenter 2nd class
Day
0.50
273.00
0114
Beldar
Day
2.00
247.00
9999
Disposal of mulba
L.S.
5.33
1.49
9999
Making good the holes including sundries
L.S.
80.73
1.49
0859
Oil type wood preservative
litre
1.22
70.00
0131
Painter
Day
0.183
273.00
0115
Coolie
Day
0.183
247.00
9999
Carriage
L.S.
0.78
1.49
9999
Brushes
L.S.
5.07
1.49
9999
Sundries
L.S.
4.81
1.49
Total:
Add water charges @ 1% on
16285.80
Add C.P & OH @15% on
16448.66
Cost for 0.30 Cum

DSR-12

Page 563 of 2298

Rate per One Cum:

Rate as per DSR-12:

Rs 63053.20
Rs 63053.20

Item Code: 14.16.1.1

Renewing wooden beams in roofs i/c making good the holes in walls & painting with oil type wood preservative : Not exceeding
4.00 metres in length : Sal wood beams.
Details of Cost for : 0.30 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for one beam i.e. 300 cudm. 0.25 x 0.30m x
4.0m (long) = 0.30 cum
Add wastage @ 2% (0.006 cum) = 0.306 cum
= 306 cudm
Propping the roof
MATERIALS
100mm diameter ballies 4m long 10 nos.
100x100mm salwood battens 1.0 metre long 5 nos.x 1.0x0.1
xO. 1 =0.05cum = 50 cudm.
These materials can be used for 16 times
Hence qty for one operation 1/16 = 3.125 cudm
1199
Sal wood beams
cum
0.003125
50000.00
2204
Carriage of Timber
cum
0.0228
100.11
LABOUR
0112
Carpenter 2nd class
Day
0.25
273.00
0114
Beldar
Day
0.25
247.00
(ii) Taking out the existing beams etc.
LABOUR
0155
Mason (Avarage)
Day
0.13
287.00
0100
Bandhani
Day
0.50
260.00
0114
Beldar
Day
0.33
247.00
(iii) Renewal
(a) Materials and Labour
1199
Sal wood beam wrought
cum
0.306
50000.00
2204
Carriage of beams
cum
0.306
100.11
0112
Carpenter 2nd class
Day
1.00
273.00
0100
Bandhani
Day
0.50
260.00
0114
Beldar
Day
1.00
247.00
Painting with oil preservative
(4x1.1) +(2.0x0.25x0.30) =4.4 + 0.15 = 4.55- sqm
0859
Paint
litre
0.455
70.00
0131
Painter
Day
0.07
273.00
0115
Coolie
Day
0.07
247.00
9999
Sundries
L.S.
0.13
1.49
9999
Carriage
L.S.
1.82
1.49
9999
Brushes
L.S.
1.82
1.49
9999
Making good the holes
L.S.
20.67
1.49
9999
Sundries
L.S.
26.91
1.49
0302
SafedaBalli 125mmdia
metre
2.50
37.00
Total:
Add water charges @ 1% on
16755.24
Add C.P & OH @15% on
16922.79
Cost for 0.30 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 64870.70
Rs 64870.70

Item Code: 14.16.1.2

DSR-12

Page 564 of 2298

Renewing wooden beams in roofs i/c making good the holes in walls & painting with oil type wood preservative : Not exceeding
4.00 metres in length : Hollock wood beams.
Details of Cost for : 0.30 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for one beam i.e. 300 cudm. 0.25 x 0.30m x
4.0m (long) = 0.30 cum
Add wastage @ 2% (0.006 cum) = 0.306 cum
=306cudm
(I) Propping the roof
MATERIALS
100mm diameter bailies 4m long 10 nos.
100x100mm Hallock wood Ballens 1.0 metre long 5 nos.x
1.0x0.1x0.1 =0.05cum = 50 cudm.
These materials can be used for 16 times
hence qty for one operation 1/16 = 3.125 cudm
2466
Hollock wood beams
cum
0.003125
31000.00
2204
Carriage of Timber
cum
0.0228
100.11
LABOUR
0112
Carpenter 2nd class
Day
0.25
273.00
0114
Beldar
Day
0.25
247.00
(ii) Taking out the existing beams etc.
(A) LABOUR
0155
Mason
Day
0.13
287.00
0100
Bandhani
Day
0.50
260.00
0114
Beldar
Day
0.33
247.00
(iii) Renewal
(a) Materials and Labour
2466
Hollock wood in scantling
cum
0.306
31000.00
2204
Carriage of Timber
cum
0.306
100.11
0112
Carpenter 2nd class
Day
1.00
273.00
0100
Bandhani
Day
0.50
260.00
0114
Beldar
Day
1.00
247.00
Painting with oil preservative
(4x1.1)+ (2.0x0.25x0.30) =4.4+ 0.15 =4.55 sqm
0859
Oil type wood preservative
litre
0.455
70.00
0131
Painter
Day
0.07
273.00
0115
Coolie
Day
0.07
247.00
9999
Sundries
L.S.
0.13
1.49
9999
Carriage
L.S.
1.82
1.49
9999
Brushes
L.S.
1.82
1.49
9999
Making good the holes
L.S.
20.67
1.49
9999
Sundries
L.S.
26.91
1.49
0302
Safeda Balli 125 mm dia
metre
2.50
37.00
Total:
Add water charges @ 1% on
10881.87
Add C.P & OH @15% on
10990.69
Cost for 0.30 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 42130.97
Rs 42131.00

Item Code: 14.16.2.1

Renewing wooden beams in roofs i/c making good the holes in walls & painting with oil type wood preservative : Above 4.00 m and
upto 5.00 m length. Sal wood beams.
Details of Cost for : 0.375 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for one beam i.e. 375 cudm. 0.25 x 0.30m x
5.0m (long) = 0.375 cum

DSR-12

Page 565 of 2298

1199
2204
0112
0114

0155
0100
0114

1199
2204
0112
0100
0114

0859
0131
0115
9999
9999
9999
9999
9999
0302

Add wastage @ 2% (0.008 cum) = 0.383 cum

=383 cudm
(I) Propping the roof
MATERIALS
125mm diameter ballies 5m long 12 nos
100x100mm salwood battens 1.0 metre long 6 nos. x 1.0x0.1
xO. 1 =60 cudm.
These materials can be used for 16 times
hence qty for one operation 1/16 = 3.75 cudm
Sal wood beams
Carriage of Timber
LABOUR
Carpenter 2nd class
Beldar
(ii) Taking out the existing beams etc.
LABOUR
Mason
Bandhani
Beldar
(iii) Renewal
Materials and Labour
Sal wood in scantling
Carriage of Timber
Carpenter 2nd class
Bandhani
Beldar
Painting with oil preservative
(2x5x0.25)+3.0 + 2.0x0.25x0.30 = 5.5 + 0.15 = 5.65 sqm
Oil type wood preservative
Painter
Coolie
Sundries
Carriage
Brushes
Making good the holes
Sundries
Safeda balli 125 mm dia

cum
cum

0.00375
0.0498

50000.00
100.11

Day
Day

0.25
0.25

273.00
247.00

Day
Day
Day

0.25
0.63
0.50

287.00
260.00
247.00

cum
cum
Day
Day
Day

0.383
0.383
1.00
1.00
2.00

50000.00
100.11
273.00
260.00
247.00

litre
Day
Day
L.S.
L.S.
L.S.
L.S.
L.S.
metre

0.565
0.08
0.08
0.26
2.34
2.21
20.67
33.15
3.75

70.00
273.00
247.00
1.49
1.49
1.49
1.49
1.49
37.00
Total:
21204.14

Add water charges @ 1% on

Add C.P & OH @15% on

21416.18
Cost for 0.375 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 65676.29
Rs 65676.30

Item Code: 14.16.2.2

Renewing wooden beams in roofs i/c making good the holes in walls & painting with oil type wood preservative : Above 4.00 m and
upto 5.00 m length. Hollock wood beams.
Details of Cost for : 0.375 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for one beam i.e. 375 cudm.
0.25 x 0.30m x 5.0m (long) = 0.375 cum
Add wastage @ 2% (0.008 cum) = 0.383 cum
= 3 83 cudm
(I) Propping the roof
MATERIALS
125mm diameter bailies 5m long 12 nos

DSR-12

Page 566 of 2298

2466
2204
0112
0114

0155
0100
0114

2466
2204
0112
0100
0114

0859
0131
0115
9999
9999
9999
9999
9999
0302

100x100mm salwood battens 1.0 metre long 6 nos. x

1.0x0.1x0.1 = 60 cudm.
These materials can be used for 16 times
hence qty for one operation 1/16 = 3.75 cudm
Hollock wood in scantling
cum
Carriage of Timber
cum
LABOUR
Carpenter 2nd class
Day
Beldar
Day
(ii) Taking out the existing beams etc.
LABOUR
Mason
Day
Bandhani
Day
Beldar
Day
(iii) Renewal
Materials and Labour
Hollock wood in scantling
cum
Carriage of Timber
cum
Carpenter 2nd class
Day
Bandhani
Day
Beldar
Day
Painting with oil preservative
(2x5xO.25)+3.O + 2.0x0.25x0.30 = 5.5 + 0.15 = 5.65 sqm
Oil type wood preservative
litre
Painter
Day
Coolie
Day
Sundries
L.S.
Carriage
L.S.
Brushes
L.S.
Making good the holes
L.S.
Sundries
L.S.
Safedaballi 125 mm dia
metre

0.00375
0.0375

31000.00
100.11

0.25
0.25

273.00
247.00

0.25
0.63
0.50

287.00
260.00
247.00

0.383
0.383
1.00
1.00
2.00

31000.00
100.11
273.00
260.00
247.00

0.565
0.08
0.08
0.26
2.34
2.21
20.67
33.15
3.75

70.00
273.00
247.00
1.49
1.49
1.49
1.49
1.49
37.00
Total:
13854.65

Add water charges @ 1% on

Add C.P & OH @15% on

13993.20
Cost for 0.375 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 42912.48
Rs 42912.50

Item Code: 14.17

Raking out joints in lime or cement mortar and_x000D_preparing the surface ._x000D_
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Details of cost for 10 sqm
LABOUR
0114
Beldar
Day
0.53
0115
Coolie
Day
0.08
0101
Bhisti
Day
0.07
9999
Sundries
L.S.
1.43
Add water charges @ 1% on

Rate

247.00
247.00
260.00
1.49
Total:
171.00

Add C.P & OH @15% on

172.71
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 19.86
Rs 19.85

Page 567 of 2298

Item Code: 14.18.1

Pointing with cement mortar 1 : 3 fine sand for flat tile brick on top of tile roof : Flush pointing on tile work._x000D_

Code

03.003
1213
0115
0124
0101
9999

Description
Details of cost for 10.00 sqm
MATERIALS
Cement mortar 1:3 (1 cement : 3 fine sand)
(Rate as per item No. 3.3) 2% of wt. of cement
Water proofing materials
LABOUR
Coolie
Mason 2nd class
Bhisti
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Cum

0.015

3631.93

kilog

0.153

25.00

Day
Day
Day
L.S.

0.36
0.36
0.36
18.85

247.00
273.00
260.00
1.49
Total:
367.20

Add water charges @ 1% on

Add C.P & OH @15% on

370.87
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 42.65
Rs 42.65

Item Code: 14.18.2

Pointing with cement mortar 1 : 3 fine sand for flat tile brick on top of tile roof : With modular brick tiles._x000D_

Code

03.003
1213
0115
0124
0101
9999

Description
Details of cost for 10.00 sqm
MATERIALS
Cement mortar 1:3 (1 cement : 3 fine sand)
(Rate as per item No. 3.3)
Water proofing material 2% of wt. of cement
LABOUR
Coolie
Mason 2nd class
Bhisti
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Cum

0.017

3631.93

kilog

0.173

25.00

Day
Day
Day
L.S.

0.36
0.36
0.36
18.85

247.00
273.00
260.00
1.49
Total:
374.96

Add water charges @ 1% on

Add C.P & OH @15% on

378.71
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 43.55
Rs 43.55

Item Code: 14.19

Taking out wind ties from roof including cutting out rusted bolts, nuts etc._x000D_
Details of Cost for : 63.00 Kg
Code
Description
Unit
Quantity
Detail of cost for 30 mtrs
M.S. Flats 40x6mm @ 1.9kg./m = 30x1.9 =
57 kg.(A)
J hook bolts @ 30cm centre to centre

DSR-12

Rate

Page 568 of 2298

0103
0100
0114

= 101 Nos. x 0.15 m = 15.15 m @ 0.40kg./m

= 6.06kg
Total (A+B) = 63.06 kg Say 63.00 kgs
LABOUR
Blacksmith 2nd class
Bandhani
Beldar

Day
Day
Day

0.09
0.06
0.16

Add water charges @ 1% on

273.00
260.00
247.00
Total:
79.69

Add C.P & OH @15% on

80.49
Cost for 63.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 1.47
Rs 1.45

Item Code: 14.20

Fixing of old wind tie with new fittings._x000D_
Code

1023
1208
1209
9999
0102
0114
9999

13.050.03

13.065.01

Description
Detail of cost for 20.2 m wind tie
MATERIALS
G.I. - J or L hooks with nuts and bolts 8 mm
dia @ 30 cm center to center = 68 nos
Bitumen washer
G.I. Washer (thick)
Carriage of bolts, nuts and washers etc.
LABOUR
Blacksmith 1st class
Beldar
Sundries
Applying priming coat with ready mixed zink
chromate yellow primer
20.2x2x(0.04+0.006) = 1.86 sqm
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise
Painting with ready mixed black anti corrosive
bitumastic paint
Painting with black anti-corrosive bitumastic paint : Two or
more coats on new work.

Details of Cost for : 20.20 m

Unit
Quantity

Rate

10 No

68.00

90.00

100 N
100 N
L.S.

68.00
68.00
1.17

25.00
32.00
1.49

Day
Day
L.S.

0.34
0.34
13.91

301.00
247.00
1.49

Sqm

1.86

20.72

Sqm

1.86

44.56

Add water charges @ 1% except on [A]+[B] i.e on

Total:
859.55

Add C.P & OH @15% except on [A]+[B] i.e on

868.15
Cost for 20.20 m
Rate per One Metre:
Rate as per DSR-12:

Rs 55.44
Rs 55.45

Item Code: 14.21

Renewing bottom rail and/or top runner of collapsible gate i/c making good all damages.
Details of Cost for : 11.55 Kg
Code
Description
Unit
Quantity
Detail of cost for gate of size 1.52x2.4 m
(weight 11.55 kg)
MATERIALS
M.S. Tee 40x40x6 mm
Top rail = 1.725 m

DSR-12

Rate

Page 569 of 2298

1007
2205
15.012.02

04.002.05
03.006
9999
9999
13.050.03

0155
0114
9999

Bottom rail = 1.570 m

Total = 3.295 m say 3.30 m @ 3.5 kg/m =11.55kg
11.55 kg
Add 10% wastage = 1.155 kg
Total = 12.705 kg = 0.1270 q say 0.13 q
Carriage of Tee 12.70 kg = 0.13 q
Taking out collapsible gate including frame
Dismantling doors, windows & C.S. windows shutter : Of area
beyond 3 sqm.
Dismantling and Demolishing)
Refixing of collapsible gate including mending good the
demaged floor, wall etc.frame
P/L CC walls, columns, string courses, coping, bed blocks,
window sills etc. up to floor f
Cement mortar 1:6 (1 cement : 6 fine sand)
(Rate as per item No. 3.6 of SH- mater)
Cement concrete 1:2:4 filled in chase cut
Disposal of mulba
Priming coat on Tees 0.16x3.3 = 0.53 sqm
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel galvanise
Labour for fixing the gate
Mason
Beldar
Sundries

quint
tonne

0.13
0.013

4250.00
77.87

Nos

1.00

139.86

Cum

0.03

4782.36

Cum

0.01

2311.69

L.S.
L.S.

24.18
1.82

1.49
1.49

Sqm

0.53

20.72

Day
Day
L.S.

0.50
0.75
2.60

287.00
247.00
1.49
Total:
947.99

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

957.47
Cost for 11.55 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 120.81
Rs 120.25

Item Code: 14.22.1

Renewing W.I. or M.S. Wheel or roller of steel door/gate : Wheel 50 mm dia. and below._x000D_
Details of Cost for : 10.00 wheel
Code
Description
Unit
Quantity
Rate
Detail of cost for 10 wheels of 40 mm dia.
Materials to be dismentled
Weight of 10 wheels
10x[3.14x{(4/2)x(4/2)}x4]x7.850/1000 =3.94 kg
Weight of 10 nos clamps 6 mm thick =10xlength
of clamp =10x0.17m @ 1.90kg/m = 3.23kg
Weight of 10 nos 10 mm dia. Bolts, 10 cm
long 10x0.10m = lm @ 0.60 kg/m = 0.60 kg
Total = 7.70 kg say 8 kg
Labour for dismantling:
0103
Blacksmith 2nd class
Day
0.01
273.00
0100
Bandhani
Day
0.01
260.00
0114
Beldar
Day
0.02
247.00
9999
Sundries
L.S.
0.39
1.49
Renewing the wheels with clamps :MATERIALS
7442
10 nos wheels 40 mm dia. 40 mm wide
each
10.00
60.00
10 nos clamps out of M.S. flat 40x6 mm, 170mm long
= 10x0.17m = 1.70m @ 1.9 kg/m =3.23kg
Add 5% wastage = 0.16 kg
1008
Total = 3.39 kg say 3.50 kg
quint
0.035
4200.00

DSR-12

Page 570 of 2298

1034
1215

0102
0100
0114

13.050.03
9999

M.S. bolt/pin 10 mm dia 10 cm long 10 nos

quint
10x0.06 = 0.6 kg = 0.006 q
Welding charges (electrical) length =
cm
10x(2x4) = 80cm
Labour for cutting, assembling and errection
charges;
Blacksmith 1st class
Day
Bandhani
Day
Beldar
Day
Priming coat: = 10x2(0.06+0.008)x0.25m =
0.34 sqm Tees 0.16x3.3 = 0.53 sqm
Applying priming coat : With ready mixed red oxide zinc Sqm
chromate primer on steel galvanise
Sundries
L.S.

0.006

5400.00

80.00

1.50

0.03
0.02
0.11

301.00
260.00
247.00

0.165

20.72

1.69

1.49
Total:
954.17

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

963.71
Cost for 10.00 wheel
Rate per Per Wheel:
Rate as per DSR-12:

Rs 111.17
Rs 111.15

Item Code: 14.22.2

Renewing W.I. or M.S. Wheel or roller of steel door/gate : Wheel above 50 mm dia._x000D_
Details of Cost for : 10.00 wheel
Code
Description
Unit
Quantity
Rate
Detail of cost for 10 wheels
Considering average wheel dia =75 mm
Width of wheel =40 mm
M.S. flat for clamp = 60x8 mm
Bolt size 16 mm dia.
Lenth of one clamp :
2x(0.04+0.0375+0.02)+0.05
=0.195+0.05=0.245m say 0.25m
Materials to be dismentled
Weight of 10 nos wheels
10x[3.14x{(7.5/2)x(7.5/2)}x4]x7.850/1000 =
13.87 kg
Weight of 10 nos clamps 8 mm thick
= 10x0.25 m @ 3.8kg/m = 9.50 kg
Weight of 10 nos 16 mm dia. Bolts, 10 cm
long 10x0.10 m @ 1.60 kg/m = 1.60 kg
Total = 24.97 kg say 25 kg
Labour for dismantling:
0103
Blacksmith 2nd class
Day
0.04
273.00
0100
Bandhani
Day
0.03
260.00
0114
Beldar
Day
0.06
247.00
9999
Sundries
L.S.
1.04
1.49
Renewing the wheels with clamps :MATERIALS
7442
10 nos wheels 75 mm dia. 40 mm wide
each
10.00
60.00
10 nos clamps out of M.S. flat 60x8 mm =
10x0.25 m @ 3.8 kg/m = 9.5 kg
Add 5% wastage = 0.48 kg
1008
Total = 9.48 kg say 10 kg
quint
0.10
4200.00
1034
M.S. bolt/pin 16 mm dia 10 cm long 10 nos
quint
0.016
5400.00
10x0.16= 1.6 kg = 0.016 q
1215
Welding charges (electrical) lenth = 10x(2x6)
cm
120.00
1.50

DSR-12

Page 571 of 2298

0102
0100
0114

13.050.03
9999

Labour for cutting, assembling and errection

charges;
Blacksmith 1st class
Day
Bandhani
Day
Beldar
Day
Priming coat: = 10x2(0.06+0.008)x0.25m =
0.34 sqm Tees 0.16x3.3 = 0.53 sqm
Applying priming coat : With ready mixed red oxide zinc Sqm
chromate primer on steel galvanise
Sundries
L.S.

0.10
0.05
0.36

301.00
260.00
247.00

0.34

20.72

5.33

1.49
Total:
1461.45

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

1476.06
Cost for 10.00 wheel
Rate per Per Wheel:
Rate as per DSR-12:

Rs 170.45
Rs 170.45

Item Code: 14.23

Pumping out watger caused by springs, tidal/river seepage, broken water mains or drains and the like.

Code

0011
0114

Description
Details for 10.91 Kiloletre
Pumping hours 3 hrs. or 0.375 days
Cost of pumping water with 4000 Iitres per
hour capacity pump
Beldar for clearing slush

Details of Cost for : 10.91 kLtr

Unit
Quantity

Rate

Day

0.375

500.00

Day

2.00

247.00
Total:
681.50

Add water charges @ 1% on

Add C.P & OH @15% on

688.32
Cost for 10.91 kLtr
Rate per One K-litr:
Rate as per DSR-12:

Rs 72.55
Rs 72.55

Item Code: 14.24

Mud mortar made with local clay and good earth
Code

0811
0114
0101
9999

Description
Detail of cost for one cum
MATERIALS
Mud (dry)
LABOUR
Beldar
Bhisti
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity

Rate

cum

1.08

50.00

Day
Day
L.S.

0.63
0.315
6.45

247.00
260.00
1.49
Total:
301.12

Add water charges @ 1% on

Add C.P & OH @15% on

304.13
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

DSR-12

Rs 349.75 (including CP &OH)

Rs 301.10

Page 572 of 2298

Item Code: 14.25

Brick work with bricks of class designation 7.5 in mud mortar.
Code
2602
03.018
2201
9999
0123
0124
0115
0101

Details of Cost for : 1.00 Cum

Unit
Quantity

Description

MATERIALS :
Common burnt clay F.P.S (non modular) Bricks of class 1000
designation 7.5
Mud mortar
Cum
Carriage of bricks
1000
Sundries
L.S.
LABOUR:
Mason 1st Class
Day
Mason Ilnd Class
Day
Coolie
Day
Bhishti
Day

Rate

494.00

2900.00

0.25
494.00
2.73

301.12
233.60
1.49

0.36
0.36
1.37
0.20

301.00
273.00
247.00
260.00
Total:
2224.38

Add water charges @ 1% on

Add C.P & OH @15% on

2246.62
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 2583.61
Rs 2583.60

Item Code: 14.26.1.1

P/F 25 mm thick shutters for cup board etc. : Panelled or panelled and glazed shutters : Superior class teak wood

Code

1186
2204
2406
0608
0639

DSR-12

Description
Details of cost for shutter of cup-board
200xl08cm = 2.16 sqm.
MATERIALS:
Styles4x200x8.0x2.5cm = 0.016 cum+
RailsTop rail1x110.5x8.0x2.5cm = 0.0022 cum+
Lock and bottom rails
2x110.5x8.0x2.5 cm = 0.0044
Panels
2x48x41x1.6cm = 0.006 cum+
Sash bars2x114x3.8x2.5cm = 0.003cum+
6x48x3.8x2.5cm = 0.003 cum+
Beading16x92x1.4x1.2cm = 0.002cum
Total = 0.0366
Add for wastage @ 10% = 0.0037 cum.
Grand Total = 0.0403 cum.
Superior class teak wood such as Dandeli, Balarshah or
Malabar in planks
Carriage of timber
Glasses 10kg/sqm 4mm thick
FittingsNickel plated mild steel piano hinges 1 mm thick 35 mm wide
Screws 25 mm
LABOUR-

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

cum

0.04

105000.00

cum
sqm

0.04
0.99

100.11
310.00

metre

4.00

35.00

100 N

120.00

30.00

Page 573 of 2298

0111
0119
0114
9999

Carpenter I class
Glazier
Beldar
Sundries

Day
Day
Day
L.S.

2.40
0.18
0.77
40.43

Add water charges @ 1% on

301.00
273.00
247.00
1.49
Total:
5708.87

Add C.P & OH @15% on

5765.96
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 3069.84
Rs 3069.85

Item Code: 14.26.1.2

P/F 25 mm thick shutters for cup board etc. : Panelled or panelled and glazed shutters : Ist class teak wood_x000D_

Code

1188
2204
2406
0608
0639
0111
0119
0114
9999

Description
Details of cost for shutters of a cup-board (half
glazed and half panelled) 200xl08cm = 2.16
sqm.
Materials:
Styles4x200x8.0x2.5cm = 0.016 cum+
RailsTop rail1x110.5x8.0x2.5cm = 0.0022cum+
Lock and bottom rail2x110.5x8.0x2.5cm = 0.0044 cum.
Panels2x48x41xl.6cm = 0.006cum+
Sash bars2x114x3.8x2.5cm = 0.003cum+
6x48x3.8x2.5cm = 0.003 cum+
Beading16x92x 1.4x 1.2cm = 0.002cum
Total = 0.0366
Add for wastage @ 10% = 0.0037 cum.
Grand Total = 0.0403 cum.
First class teak wood in planks
Carriage of timber
Glasses lOkg/sqm 4mm thick
FittingsNickle plated bright finished M.S. Piano
hinges
Screws 25mm
LabourCarpenter I class
Glazier
Beldar
Sundries

Details of Cost for : 2.16 Sqm

Unit
Quantity

Rate

cum
cum
sqm

0.04
0.04
0.99

80000.00
100.11
310.00

metre

4.00

35.00

100 N

120.00

30.00

2.40
0.18
0.77
40.43

301.00
273.00
247.00
1.49
Total:
4708.87

Day
Day
Day
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

4755.96
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 2532.11
Rs 2532.10

Page 574 of 2298

Item Code: 14.26.2.1

P/F 25 mm thick shutters for cup board etc. : Glazed shutters : Superior class teak wood_x000D_
Details of Cost for : 2.16 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for shutter of cup-board
200x108cm = 2.16 sqm.
MATERIALS :
(i) Teak wood first class
Styles : 4x200x9.5x2.5 cm = 0.019 cum
Rails
Top & intermediate rails
2x110.5x9.5x2.5 cm = 0.006 cum
Lock and bottom rails
2x110.5x19.7x2.5 cm = 0.011 cum
Beadings2x186.lxl.9xl.2cm = 0.001cum+
4x 171.70x 1.9x 1.2cm = 0.002cum.
Total = 0.039 cum.
Add for wastage @ 10% = 0.004 cum.
Grand Total = 0.043 cum.
1186
Superior class teak wood such as Dandeli,
cum
0.043
105000.00
Balarshah or Malabar in planks
2406
(ii) Glasses (lOkg/sqm) 4.0mm thick
sqm
1.27
310.00
0608
(iii) Piano hinges-75x45x3.2 mm
metre
4.00
35.00
0639
(iv)M.S. screws 25 mm
100 N
120.00
30.00
0597
M.S. butt hinges50x37x 1.50 mm
10 No
2.00
45.00
0640
M.S. screws 20 mm
100 N
8.00
25.00
2204
(v) Carriage of timber
cum
0.043
100.11
LABOUR:
0156
Carpenter (Avg.)
Day
1.83
287.00
0119
Glazier
Day
0.23
273.00
0114
Beldar
Day
0.77
247.00
9999
Sundries
L.S.
40.43
1.49
Total:
Add water charges @ 1% on
5938.43
Add C.P & OH @15% on
5997.81
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 3193.28
Rs 3193.30

Item Code: 14.26.2.2

P/F 25 mm thick shutters for cup board etc. :Glazed shutters : Ist class teak wood_x000D_
Details of Cost for : 2.16 Sqm
Code
Description
Unit
Quantity
Details of cost for shutter of cup-board
200x108cm = 2.16 sqm.
MATERIALS :
(i) Teak wood first class
Styles : 4x200x9.5x2.5 cm = 0.019 cum
Rails
Top & intermediate rails
2x110.5x9.5x2.5 cm = 0.006 cum
Lock and bottom rails
2x110.5x19.7x2.5 cm = 0.011 cum
Beadings-

DSR-12

Rate

Page 575 of 2298

1188
2406
0608
0639
0597
0640
2204
0156
0119
0114
9999

2x186. lxl.9x1.2cm = 0.001cum+

4xl71.70xl.9xl.2cm = 0.002cum.
Total = 0.039 cum.
Add for wastage @ 10% = 0.004 cum.
Grand Total = 0.043 cum.
First class teak wood in planks
(ii) Glasses (lOkg/sqm) 4.0mm thick
(iii) Piano hinges-75x45x3.2 mm
(iv)M.S. screws 25 mm
M.S. butt hinges50x37xl .50 mm
M.S. screws 20 mm
(v) Carriage of timber
LABOUR:
Carpenter (Avg.)
Glazier
Beldar
Sundries

cum
sqm
metre
100 N
10 No
100 N
cum
Day
Day
Day
L.S.

0.043
1.27
4.00
120.00
2.00
8.00
0.043

80000.00
310.00
35.00
30.00
45.00
25.00
100.11

1.83
0.23
0.77
40.43

287.00
273.00
247.00
1.49
Total:
4863.43

Add water charges @ 1% on

Add C.P & OH @15% on

4912.06
Cost for 2.16 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2615.22
Rs 2615.20

Item Code: 14.27.1

P/F plain jaffri door & window shutters i/c bright or/& black enamelled M.S. butt hinges : Second class teak wood.

Code

1190
2204
09.041.01
0595
0597
0637
0640

0112

Description
Details of cost of a jaffri shutter 176x86 cm = 1.51sqm
MATERIALS
Teak wood 2nd class
Styles 2x176x7.5x3.5 cm = 0.0092 cum
Rails 3x86x7.5x3.5 = 0.0068 cum
Total 0.0160 cum
Add wastage @ 10 % =0.0016 cum
Total = 0.0176 cum Say 18 cudm
Second class teak wood in planks
Carriage of timber
Plain Jaffri work
P/F plain jaffri of 35 x 10 mm laths placed 35mm apart(frames
to be paid separately)
Iron hinges 100x58x 1.9 mm
Iron hinges 50x37x1.5 mm
Screws 40 mm
Screws 20 mm
LABOUR
(For making frame and fixing fitting)
Carpenter 2nd class

Details of Cost for : 1.51 Sqm

Unit
Quantity

Rate

cum
cum

0.018
0.018

72000.00
100.11

Sqm

1.51

1589.10

6.00
2.00
48.00
8.00

80.00
45.00
50.00
25.00

0.30

273.00
Total:
1462.70

10 No
10 No
100 N
100 N

Day

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

1477.33
Cost for 1.51 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 2714.22
Rs 2714.20

Page 576 of 2298

Item Code: 14.28.1

P/F curtain rods of 1.25 mm thick brass plates_x000D_
Code

0444
0446
9999
9999

09.032
9999
9999

Details of Cost for : 2.00 m

Description
Unit
Quantity
Detail of cost for 2 m long
MATERIALS
Brass curtain rod 20 mm dia
metre
2.00
Brass bracket
each
2.00
Screws
L.S.
2.73
Carriage
L.S.
1.56
Wooden plugs including cutting brick work
and fixing in cement mortar
Providing 50x50x50mm 2nd class teak wood plugs fixing in Nos
2.00
CM 1:3
Labour
L.S.
2.73
Sundries
L.S.
1.56
Add water charges @ 1% except on [A] i.e on

Rate

100.00
40.00
1.49
1.49

17.42
1.49
1.49
Total:
292.78

Add C.P & OH @15% except on [A] i.e on

295.71
Cost for 2.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 187.46
Rs 187.45

Item Code: 14.28.2

P/F curtain rods of 1.25 mm thick brass plates with two brass brackets : 25 mm diametre._x000D_
Details of Cost for : 2.00 m
Code
Description
Unit
Quantity
Detail of cost for 2 m long
MATERIALS
0445
Brass curtain rod 25 mm dia
metre
2.00
0446
Brass bracket
each
2.00
9999
Screws
L.S.
2.73
9999
Carriage
L.S.
1.56
Wooden plugs including cutting brick work and fixing in
cement mortar
09.032
Providing 50x50x50mm 2nd class teak wood plugs fixing in Nos
2.00
CM 1:3
9999
Labour
L.S.
2.73
9999
Sundries
L.S.
1.56
Add water charges @ 1% except on [A] i.e on

Rate

120.00
40.00
1.49
1.49

17.42
1.49
1.49
Total:
332.78

Add C.P & OH @15% except on [A] i.e on

336.11
Cost for 2.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 210.69
Rs 210.65

Item Code: 14.29

P/F M.S. round or square bars with M.S. flats at_x000D_required spacings in wooden frames of windows &_x000D_clerestory
windows._x000D_
Details of Cost for : 33.67 Kg
Code
Description
Unit
Quantity
Rate
Details of cost for window -140x110cm

DSR-12

Page 577 of 2298

1003

1008
2205
9999
0103
0112
0114

MATERIALS:
M.S. bar 16 mm dia 13x136 cm = 17.68 m @
1.57 kg/m = 27.93 kg
Add for wastage @ 10% =2.79 kg
Total = 30.72 kg or 0.307 q
M.S. bar
M.S. flat 40x6mm 2x96cm = 192cm+
1x110cm = 110cm
= 302cm+
Add wastage @ 10% = 30cm
Total = 332cm.@ 1.90 kg/m = 6.31 kg Say
0.063 quintal
M.S. flat
Carriage of steel (0.307+0.063 = 0.37 q = 0.037t
Sundries
LABOURBlacksmith 2nd class
Carpenter 2nd class
Beldar

quint

0.307

4000.00

quint
tonne
L.S.

0.063
0.037
26.91

4200.00
77.87
1.49

0.35
0.20
0.45

273.00
273.00
247.00
Total:
1796.88

Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

1814.85
Cost for 33.67 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 61.99
Rs 62.00

Item Code: 14.30.1

Providing joists (karries) including hoisting fixing in position : Sal wood.
Code

1199
2204
0112
0114
0100
13.057.01
9999

Details of Cost for : 0.30 Cum

Description
Unit
Quantity
Details of cost for 300cudm. or 0.30cum
MATERIALSSal wood
10x30xl0x30cm = 0.30 cum. or = 300 cudm.+
Add wastage @ 2% = 6.00 cudm.
Total = 306 cudm.
Sal wood
cum
0.306
Carriage of timber
cum
0.306
LABOURCarpenter 2nd class
Day
0.70
Beldar
Day
1.45
Bandhani
Day
0.70
Priming coat (Wood preservative)
Painting with oil type wood preservative : New work (two or Sqm
0.80
more coats).
Sundries
L.S.
26.91
Add water charges @ 1% except on [A] i.e on

Rate

50000.00
100.11
273.00
247.00
260.00
18.68
1.49
Total:
16101.98

Add C.P & OH @15% except on [A] i.e on

16263.00
Cost for 0.30 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 62391.30
Rs 62391.40

Item Code: 14.30.2

DSR-12

Page 578 of 2298

Providing joists (karries) including hoisting fixing in position : Hollock wood._x000D_

Details of Cost for : 0.30 Cum
Code
Description
Unit
Quantity
Details of cost for 300cudm. or 0.30 cum
MATERIALSHollock wood in scantling
10x30xl0x30cm = 0.30 cum. or = 300 cudm.+
Add wastage @ 2% = 6.00 cudm.
Total = 306 cudm.
2466
Hollock wood in scantling
cum
0.306
2204
Carriage of timber
cum
0.306
LABOUR0112
Carpenter 2nd class
Day
0.70
0114
Beldar
Day
1.45
0100
Bandhani
Day
0.70
Priming coat (Wood preservative)
13.057.01 Painting with oil type wood preservative : New work (two or Sqm
0.80
more coats).
9999
Sundries
L.S.
26.91
Add water charges @ 1% except on [A] i.e on

Rate

31000.00
100.11
273.00
247.00
260.00
18.68
1.49
Total:
10287.98

Add C.P & OH @15% except on [A] i.e on

10390.86
Cost for 0.30 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 39881.43
Rs 39881.50

Item Code: 14.31.1

P/F bright finished brass single acting spring hinges: 150 mm._x000D_
Code

0389
0449
9999
0111
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 nos.
MATERIALSBrass spring hinges 150 mm
Brass screws 50 mm
Carriage of materials
LABOURCarpenter 1st class
Beldar

each
100 N
L.S.
Day
Day

Rate

10.00
80.00
3.64

300.00
200.00
1.49

0.40
0.20

301.00
247.00
Total:
3335.22

Add water charges @ 1% on

Add C.P & OH @15% on

3368.57
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 387.39
Rs 387.40

Item Code: 14.31.2

P/F bright finished brass single acting spring hinges: 125 mm._x000D_
Code

0390
0449
9999

DSR-12

Description
Details of cost for 10 nos.
MATERIALSBrass spring hinges 125 mm
Brass screws 50mm
Carriage of materials

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
L.S.

10.00
80.00
3.64

Rate

250.00
200.00
1.49

Page 579 of 2298

0111
0114

LABOURCarpenter 1st class

Beldar

Day
Day

0.40
0.20

Add water charges @ 1% on

301.00
247.00
Total:
2835.22

Add C.P & OH @15% on

2863.57
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 329.31
Rs 329.30

Item Code: 14.31.3

P/F bright finished brass single acting spring hinges: 100 mm.
Code

0391
0450
9999
0111
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 nos.
MATERIALSBrass spring hinges 100 mm
Brass screws 40 mm
Carriage of materials
LABOURCarpenter 1st class
Beldar

each
100 N
L.S.
Day
Day

Rate

10.00
80.00
3.64

150.00
160.00
1.49

0.40
0.20

301.00
247.00
Total:
1803.22

Add water charges @ 1% on

Add C.P & OH @15% on

1821.25
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 209.44
Rs 209.45

Item Code: 14.32.1

P/F bright finished brass double acting spring hinges: 150 mm._x000D_
Code

0392
0449
9999
0111
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 nos.
MATERIALSBrass double acting spring hinges 150 mm
Brass screws 50 mm
Carriage of materials
LABOURCarpenter 1st class
Beldar

each
100 N
L.S.
Day
Day

Rate

10.00
80.00
3.64

500.00
200.00
1.49

0.40
0.20

301.00
247.00
Total:
5335.22

Add water charges @ 1% on

Add C.P & OH @15% on

5388.57
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 619.69
Rs 619.70

Item Code: 14.32.2

P/F bright finished brass double acting spring hinges: 125 mm._x000D_
Details of Cost for : 10.00 Nos

DSR-12

Page 580 of 2298

Code

0393
0449
9999
0111
0114

Description
Details of cost for 10 nos.
MATERIALSBrass double acting spring hinges 125 mm
Brass screws 50 mm
Carriage of materials
LABOURCarpenter 1st class
Beldar

Unit

each
100 N
L.S.
Day
Day

Quantity

Rate

10.00
80.00
3.64

350.00
200.00
1.49

0.40
0.20

301.00
247.00
Total:
3835.22

Add water charges @ 1% on

Add C.P & OH @15% on

3873.57
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 445.46
Rs 445.45

Item Code: 14.32.3

P/F bright finished brass double acting spring hinges: 100 mm._x000D_
Code

0394
0450
9999
0111
0114

Description
Details of cost for 10 nos.
MATERIALSBrass double acting spring hinges 100 mm
Brass screws 40 mm
Carriage of materials L.S.
LABOURCarpenter 1st class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
L.S.
Day
Day

Rate

10.00
80.00
3.64

300.00
160.00
1.49

0.40
0.20

301.00
247.00
Total:
3303.22

Add water charges @ 1% on

Add C.P & OH @15% on

3336.25
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 383.67
Rs 383.65

Item Code: 14.33.1

P/F bright finished brass bolts : 250 mm._x000D_
Code

0404
0452
9999
0111

Description
Details of cost for 10 nos.
MATERIALSBrass flush bolt 250 mm
Brass screws 25 mm
Carriage of materials
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
L.S.
Day

Rate

10.00
60.00
3.64

140.00
95.00
1.49

0.20

301.00
Total:
1522.62

Add water charges @ 1% on

Add C.P & OH @15% on

1537.85
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 176.85
Rs 176.85

Page 581 of 2298

Item Code: 14.33.2

P/F bright finished brass bolts : 150 mm._x000D_
Code

0405
0452
9999
0111

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 nos.
MATERIALSBrass flush bolt 150 mm
Brass screws 25 mm
Carriage of materials
LABOURCarpenter 1st class

each
100 N
L.S.
Day

Rate

10.00
60.00
2.73

120.00
95.00
1.49

0.17

301.00
Total:
1312.24

Add water charges @ 1% on

Add C.P & OH @15% on

1325.36
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 152.42
Rs 152.40

Item Code: 14.33.3

P/F bright finished brass bolts : 100 mm.
Code

0406
0452
9999
0111

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 nos.
MATERIALSBrass flush bolt 100 mm
Brass screws 25 mm
Carriage of materials
LABOURCarpenter 1st class

each
100 N
L.S.
Day

Rate

10.00
60.00
2.73

85.00
95.00
1.49

0.17

301.00
Total:
962.24

Add water charges @ 1% on

Add C.P & OH @15% on

971.86
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 111.76
Rs 111.75

Item Code: 14.34

P/F 150 mm bright finished floor brass door stopper with rubber cushion.
Code

0417
0450
9999
0111
9999

DSR-12

Description
Details of cost for 10 nos.
MATERIALSBrass door stopper 150 mm
Brass screws 40 mm
Carriage of material
LABOURCarpenter 1st class
Sundries (wooden plugs including fixing in the floor)

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
L.S.

Rate

10.00
40.00
2.73

160.00
160.00
1.49

0.07
6.37

Add water charges @ 1% on

301.00
1.49
Total:
1698.63

Add C.P & OH @15% on

1715.62

Day
L.S.

Page 582 of 2298

Cost for 10.00 Nos

Rate per Each:
Rate as per DSR-12:

Rs 197.30
Rs 197.30

Item Code: 14.35.1

P/F bright finished brass hard drawn hooks and eyes : 300 mm.
Code

0418
9999
0111

Description
Details of cost for 10 nos.
MATERIALSBright finished brass hooks & eyes 300 mm
Carriage of material
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity

10 No
L.S.
Day

Rate

10.00
0.91

700.00
1.49

0.06

301.00
Total:
719.42

Add water charges @ 1% on

Add C.P & OH @15% on

726.61
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 83.56
Rs 83.55

Item Code: 14.35.2

P/F bright finished brass hard drawn hooks and eyes : 250 mm.
Code

0419
9999
0111

Description
Details of cost for 10 nos.
MATERIALSBright finished brass hooks & eyes 250 mm
Carriage of material
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity

10 No
L.S.
Day

Rate

10.00
0.91

675.00
1.49

0.06

301.00
Total:
694.42

Add water charges @ 1% on

Add C.P & OH @15% on

701.36
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 80.66
Rs 80.65

Item Code: 14.35.3

P/F bright finished brass hard drawn hooks and eyes : 200 mm.
Code

0420
9999
0111

DSR-12

Description
Details of cost for 10 nos.
MATERIALSBright finished brass hooks & eyes 200 mm
Carriage of material
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity

10 No
L.S.

Rate

10.00
0.91

625.00
1.49

0.06

Add water charges @ 1% on

301.00
Total:
644.42

Add C.P & OH @15% on

650.86

Day

Page 583 of 2298

Cost for 10.00 Nos

Rate per Each:
Rate as per DSR-12:

Rs 74.85
Rs 74.85

Item Code: 14.35.4

P/F bright finished brass hard drawn hooks and eyes : 150 mm.
Code

0421
9999
0111

Description
Details of cost for 10 nos.
MATERIALSBright finished brass hooks & eyes 150 mm
Carriage of material
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity

10 No
L.S.
Day

Rate

10.00
0.91

600.00
1.49

0.06

301.00
Total:
619.42

Add water charges @ 1% on

Add C.P & OH @15% on

625.61
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 71.95
Rs 71.95

Item Code: 14.35.5

P/F bright finished brass hard drawn hooks and eyes : 100 mm.
Code

0422
9999
0111

Description
Details of cost for 10 nos.
MATERIALSBright finished brass hooks & eyes 100 mm
Carriage of material
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity

10 No
L.S.
Day

Rate

10.00
0.91

500.00
1.49

0.06

301.00
Total:
519.42

Add water charges @ 1% on

Add C.P & OH @15% on

524.61
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 60.33
Rs 60.35

Item Code: 14.36

P/F bright finished brass fan light pivot.
Code

0429
0450
9999
0111

Description
Details of cost for 10 nos.
MATERIALSBrass fan light pivot
Brass screws 40 mm
Carriage of material
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity

10 No
100 N
L.S.
Day

10.00
40.00
0.91

190.00
160.00
1.49

0.08

301.00
Total:
279.44

Add water charges @ 1% on

DSR-12

Rate

Page 584 of 2298

Add C.P & OH @15% on

282.23
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 32.46
Rs 32.45

Item Code: 14.37

P/F 300 mm long bright fini- shed brass chain with hook for fan light.
Code

0430
0452
9999
0111

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 nos.
MATERIALSBrass chain with hook 300 mm long
Brass screws 25 mm
Carriage of material
LABOURCarpenter 1st class

each
100 N
L.S.
Day

Rate

10.00
40.00
0.91

30.00
95.00
1.49

0.10

301.00
Total:
369.46

Add water charges @ 1% on

Add C.P & OH @15% on

373.15
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 42.91
Rs 42.90

Item Code: 14.38

P/F bright finished brass quadrant stay 300 mm long with necessary screws.
Code

0427
0452
9999
0111

Description
Details of cost for 10 nos.
MATERIALSBrass quadrant stay 300 mm long
Brass screws 25 mm
Carriage of material
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
L.S.
Day

Rate

10.00
40.00
0.91

120.00
95.00
1.49

0.10

301.00
Total:
1269.46

Add water charges @ 1% on

Add C.P & OH @15% on

1282.15
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 147.45
Rs 147.45

Item Code: 14.39

P/F bright finished brass helical door spring (superior quality).
Code

0442
0449
0452
0111

DSR-12

Description
Details of cost for 10 nos.
MATERIALSHelical door spring (superior quality) 150 mm
Brass screws 50 mm
Brass screws 25 mm
LABOURCarpenter 1st class

Details of Cost for : 10.00 Nos

Unit
Quantity

each
100 N
100 N
Day

Rate

10.00
40.00
20.00

300.00
200.00
95.00

0.40

301.00

Page 585 of 2298

0114

Beldar

Day

0.20

Add water charges @ 1% on

247.00
Total:
3268.80

Add C.P & OH @15% on

3301.49
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 379.67
Rs 379.65

Item Code: 14.40.1

P/F chromium plated brass butt hinges with necessary screws: 125 x 70 x 4 mm (Ordinary type).
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
MATERIALS0525
Brass butt hinges (chromium plated)
10 No
10.00
125x70x4 mm (ordinary type)
0585
Brass screws 50 mm
100 N
100.00
9999
Carriage of material
L.S.
3.64
LABOUR0111
Carpenter 1 st class
Day
0.14
0114
Beldar
Day
0.10
Add water charges @ 1% on

Rate

810.00
230.00
1.49
301.00
247.00
Total:
1112.26

Add C.P & OH @15% on

1123.38
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 129.19
Rs 129.20

Item Code: 14.40.2

P/F chromium plated brass butt hinges with necessary screws: 100 x 70 x 4 mm (ordinary type).
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
MATERIALS0526
Brass butt hinges (chromium plated)
10 No
10.00
100x70x4 mm (ordinary type)
0586
Brass screws 40 mm
100 N
80.00
9999
Carriage of material
L.S.
3.64
LABOUR0111
Carpenter 1st class
Day
0.14
0114
Beldar
Day
0.10
Add water charges @ 1% on

Rate

675.00
190.00
1.49
301.00
247.00
Total:
899.26

Add C.P & OH @15% on

908.25
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 104.45
Rs 104.45

Item Code: 14.40.3

P/F chromium plated brass butt hinges with necessary screws: 75 x 65 x 4 mm (heavy type).
Details of Cost for : 10.00 Nos

DSR-12

Page 586 of 2298

Code

0524
0587
9999
0111
0114

Description
Details of cost for 10 nos.
MATERIALSBrass butt hinges (chromium plated) 75x65x4
mm (heavy type)
Brass screws 30 mm
Carriage of material L.S.
LABOURCarpenter 1st class
Beldar

Unit

Quantity

Rate

10 No

10.00

950.00

100 N
L.S.

60.00
1.82

150.00
1.49

0.14
0.10

301.00
247.00
Total:
1109.55

Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

1120.65
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 128.88
Rs 128.90

Item Code: 14.40.4

P/F chromium plated brass butt hinges with necessary screws: 75 x 40 x 2.5 mm (ordinary type).
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
MATERIALS0527
Brass butt hinges (chromium plated)
10 No
10.00
75x40x2.5 mm (ordinary type)
0587
Brass screws 30 mm
100 N
60.00
9999
Carriage of material
L.S.
1.82
LABOUR0111
Carpenter 1st class
Day
0.14
0114
Beldar
Day
0.10
Add water charges @ 1% on

Rate

425.00
150.00
1.49
301.00
247.00
Total:
584.55

Add C.P & OH @15% on

590.40
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 67.90
Rs 67.90

Item Code: 14.40.5

P/F chromium plated brass butt hinges with necessary screws: 50 x 40 x 2.5 mm (ordinary type).
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 nos.
MATERIALS0528
Brass butt hinges (chromium plated)
10 No
10.00
50x40x2.5 mm (ordinary type)
0589
Brass screws 20 mm
100 N
40.00
9999
Carriage of material
L.S.
0.91
LABOUR0111
Carpenter 1st class
Day
0.08
Add water charges @ 1% on

Rate

185.00
100.00
1.49
301.00
Total:
250.44

Add C.P & OH @15% on

252.94
Cost for 10.00 Nos

DSR-12

Page 587 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 29.09
Rs 29.10

Item Code: 14.41

P/F 85 x 42 mm chromium plated brass pull bolt lock.
Code

2467
9999
0112

Description
Details of cost for 10 nos
MATERIALSChromium plated brass pull bolt lock
including bolts, nuts & washers
Carriage of materials & sundries
LABOURCarpenter 2nd class

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

each

10.00

145.00

L.S.

6.37

1.49

Day

0.25

273.00
Total:
1527.74

Add water charges @ 1% on

Add C.P & OH @15% on

1543.02
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 177.45
Rs 177.45

Item Code: 14.42.1

Code

0775
9999
0141
0115
9999
9999

Description
Detail of cost for 10 sqm
MATERIALSDehradun white lime
Carriage of lime
LABOURWhite Washer
Coolie
Indigo gum etc
Sundries ladders etc

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

quint
L.S.

0.02
0.52

410.00
1.49

Day
Day
L.S.
L.S.

0.11
0.06
2.73
2.73

260.00
247.00
1.49
1.49
Total:
60.53

Add water charges @ 1% on

Add C.P & OH @15% on

61.14
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 7.03
Rs 7.05

Item Code: 14.42.2

Code

0775
9999
0141
0115
9999
9999

DSR-12

Description
Detail of cost for 10 sqm
MATERIALSDehradun white lime
Carriage of lime
LABOURWhite Washer
Coolie
Indigo gum etc
Sundries ladders etc

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

quint
L.S.

0.01
0.52

410.00
1.49

Day
Day
L.S.
L.S.

0.07
0.03
2.08
2.73

260.00
247.00
1.49
1.49

Page 588 of 2298

Add water charges @ 1% on

Total:
37.65

Add C.P & OH @15% on

38.03
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 4.37
Rs 4.35

Item Code: 14.43

Code
0114
0115
0101
9999
9999

Description
LABOUR :
Beldar
Coolie
Bhisthi
Sundries such as sand paper and scraper
Repairs to scratches

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
Day
L.S.
L.S.

0.09
0.04
0.04
2.73
1.82

Add water charges @ 1% on

Rate
247.00
247.00
260.00
1.49
1.49
Total:
49.29

Add C.P & OH @15% on

49.78
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 5.73
Rs 5.70

Item Code: 14.44

Code

0815
9999
9999
0131
0115
9999

Description
Details of cost for 10 sqm.
MATERIALSDry distemper
Carriage of distemper
Brushes, sand-paper etc.
LABOURPainter
Coolie
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

kilog
L.S.
L.S.

1.00
0.91
5.33

35.00
1.49
1.49

Day
Day
L.S.

0.33
0.17
4.42

273.00
247.00
1.49
Total:
182.97

Add water charges @ 1% on

Add C.P & OH @15% on

184.80
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 21.25
Rs 21.25

Item Code: 14.45.1

Oil bound distemper : On old work ( one or more coats ).
Code
0816
9999
9999

DSR-12

Description
MATERIALS :
Oil bound washable distemper/ Acrylic distemper
Brushes, putty etc.,
Sundries including carriage
LABOUR:

Details of Cost for : 10.00 Sqm

Unit
Quantity
kilog
L.S.
L.S.

1.00
0.52
10.79

Rate
42.00
1.49
1.49

Page 589 of 2298

0131
0115
9999

Painter
Coolie
Sundries

Day
Day
L.S.

0.33
0.17
7.15

Add water charges @ 1% on

273.00
247.00
1.49
Total:
201.58

Add C.P & OH @15% on

203.60
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 23.41
Rs 23.40

Item Code: 14.46

Removing dry or oil bound distemper.
Code

Description

0114
0115
0101
9999

LABOUR :
Beldar
Coolie
Bhisthi
Scrapper, sand paper etc.

9999

Sundries including mortar to repair the surface

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

Day
Day
Day

0.11
0.05
0.05

247.00
247.00
260.00

L.S.

6.24

1.49

L.S.

1.82

1.49
Total:
64.53

Add water charges @ 1% on

Add C.P & OH @15% on

65.18
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 7.50
Rs 7.50

Item Code: 14.47.1

Painting on G.S. sheet with synthetic enamel paint : Old work (one or more coats).
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Details of cost for 10 sqm.
MATERIALS0845
Roofing paint
litre
0.46
9999
Carriage
L.S.
0.52
LABOUR0131
Painter
Day
0.36
0115
Coolie
Day
0.36
9999
Putty, brushes sand paper etc.
L.S.
6.67
9999
Sundries
L.S.
8.06
Add water charges @ 1% on

Rate

110.00
1.49
273.00
247.00
1.49
1.49
Total:
260.52

Add C.P & OH @15% on

263.13
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 30.26
Rs 30.30

Item Code: 14.48.1

DSR-12

Page 590 of 2298

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint : 75 mm
diameter pipes.
Details of Cost for : 30.00 m
Code
Description
Unit
Quantity
Rate
Detail of cost for 30 mtrs
Area=22/7 x0.0814 x30m =7.67sqm
MATERIALS
4202
Zinc chromate red oxide primer
litre
0.41
68.00
9999
Carriage
L.S.
0.39
1.49
LABOUR
0131
Painter
Day
0.18
273.00
0115
Coolie
Day
0.18
247.00
9999
Brushes, sand paper etc
L.S.
8.19
1.49
MATERIALS
0828
Anticorrosive bituminous paint (black)
litre
0.73
85.00
9999
Carriage
L.S.
1.04
1.49
LABOUR
0131
Painter
Day
0.41
273.00
0115
Coolie
Day
0.41
247.00
9999
Putty, sand paper etc
L.S.
4.16
1.49
9999
Sundries
L.S.
6.24
1.49
9999
Wire brushes for cleaning
L.S.
4.42
1.49
9999
Extra for delays
L.S.
40.30
1.49
Total:
Add water charges @ 1% on
493.20
Add C.P & OH @15% on
498.13
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 19.10
Rs 19.10

Item Code: 14.49.1

Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint : 75 mm
diameter pipes.
Details of Cost for : 30.00 m
Code
Description
Unit
Quantity
Rate
Detail of cost for 30 mtrs
Area=22/7 x0.0814x30m =7.67sqm
MATERIALS
0828
Anticorrosive bituminous paint (black)
litre
0.43
85.00
9999
Carriage
L.S.
0.39
1.49
LABOUR
0131
Painter
Day
0.27
273.00
0115
Coolie
Day
0.27
247.00
9999
Putty, sand paper etc
L.S.
4.16
1.49
9999
Sundries
L.S.
6.24
1.49
9999
Wire brushes for cleaning
L.S.
4.42
1.49
9999
Extra for delays
L.S.
26.91
1.49
Total:
Add water charges @ 1% on
239.72
Add C.P & OH @15% on
242.12
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 9.28
Rs 9.30

Page 591 of 2298

Item Code: 14.49.2

Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint - 100
mm diameter pipes
Details of Cost for : 30.00 m
Code
Description
Unit
Quantity
Rate
Area = 22/7 x 106.4 mm x 30m = 10.032 sqm
MATERIALS:
0828
Anticorrosive bituminous paint (black)
litre
0.57
85.00
9999
Carriage
L.S.
0.52
1.49
LABOUR:
0131
Painter
Day
0.36
273.00
0115
Coolie
Day
0.36
247.00
9999
Putty , sand paper etc.,
L.S.
5.33
1.49
9999
Sundries
L.S.
8.06
1.49
9999
Wire brushes for cleaning
L.S.
5.33
1.49
9999
Extra for delay
L.S.
34.06
1.49
Total:
Add water charges @ 1% on
315.06
Add C.P & OH @15% on
318.21
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 12.20
Rs 12.20

Item Code: 14.49.3

Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint - 150
mm diameter pipes
Details of Cost for : 30.00 m
Code
Description
Unit
Quantity
Rate
Area = 22/7 x 157.2 mm x 30m = 14.82 sqm
MATERIALS:
0828
Anticorrosive bituminous paint (black)
litre
0.85
85.00
9999
Carriage
L.S.
0.65
1.49
LABOUR:
0131
Painter
Day
0.53
273.00
0115
Coolie
Day
0.53
247.00
9999
Putty , sand paper etc.,
L.S.
8.06
1.49
9999
Sundries
L.S.
11.96
1.49
9999
Wire brushes for cleaning
L.S.
7.14
1.49
9999
Extra for delay
L.S.
40.30
1.49
Total:
Add water charges @ 1% on
449.34
Add C.P & OH @15% on
453.83
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 17.40
Rs 17.40

Item Code: 14.50.1

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with, aluminium paint : - 75mm dia pipes

Code

Description

Details of Cost for : 30.00 m

Unit
Quantity

Rate

Detail of cost for 30 mtrs

Area =22/7x0.0814x30=7.67sqm
MATERIALS

DSR-12

Page 592 of 2298

4202
9999
0131
0115
9999
0826
9999
9999
0131
0115
9999
9999
9999

Red oxide Zinc chromate primer

Carriage
LABOUR
Painter
Coolie
Sundries
MATERIALS
Aluminium paint
Carriage
Putty, sand paper etc
LABOUR
Painter
Coolie
Sundries
Wire brushes for cleaning
Extra for delays

litre
L.S.

0.41
0.39

68.00
1.49

Day
Day
L.S.

0.18
0.18
8.19

273.00
247.00
1.49

litre
L.S.
L.S.

0.61
1.04
4.16

115.00
1.49
1.49

Day
Day
L.S.
L.S.
L.S.

0.41
0.41
5.20
9.10
44.85

273.00
247.00
1.49
1.49
1.49
Total:
513.50

Add water charges @ 1% on

Add C.P & OH @15% on

518.64
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 19.88
Rs 19.90

Item Code: 14.50.2

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with, aluminium paint : - 100mm dia pipes

Code

4202
9999
0131
0115
9999
0826
9999
9999

0131
0115
9999
9999
9999

Description
Detail of cost for 30 mtrs
Area =22/7x106.4mm x30= 10.032sqm
MATERIALS
Red oxide Zinc chromate primer
Carriage
LABOUR
Painter
0.18 x 10.032 / 7.67
Coolie
Sundries
MATERIALS
Aluminium paint
0.61 x 10.032 / 7.67
Carriage
Putty, sand paper etc
LABOUR
LABOUR:
Painter
Coolie
0.41 x 10.032 / 7.67 = 0.54
Sundries
Wire brushes for cleaning
Extra for delays

Details of Cost for : 30.00 m

Unit
Quantity

Rate

litre
L.S.

0.54
0.52

68.00
1.49

Day

0.24

273.00

Day
L.S.

0.24
10.79

247.00
1.49

litre

1.16

115.00

L.S.
L.S.

1.43
5.33

1.49
1.49

Day
Day

0.54
0.54

273.00
247.00

L.S.
L.S.
L.S.

6.76
11.96
66.43

1.49
1.49
1.49
Total:
729.51

Add water charges @ 1% on

Add C.P & OH @15% on

736.81
Cost for 30.00 m

DSR-12

Page 593 of 2298

Rate per One Metre:

Rate as per DSR-12:

Rs 28.24
Rs 28.25

Item Code: 14.50.3

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with, aluminium paint : - 150mm dia pipes

Code

4202
9999
0131
0115
9999
0826
9999
9999
0131
0115
9999
9999
9999

Description
Detail of cost for 30 mtrs
Area =22/7x0.0814x30=7.67sqm
MATERIALS
Red oxide Zinc chromate primer
Carriage
LABOUR
Painter
Coolie
Sundries
MATERIALS
Aluminium paint
Carriage
Putty, sand paper etc
LABOUR
Painter
Coolie
Sundries
Wire brushes for cleaning
Extra for delays

Details of Cost for : 30.00 m

Unit
Quantity

Rate

litre
L.S.

0.80
0.65

68.00
1.49

Day
Day
L.S.

0.36
0.36
15.99

273.00
247.00
1.49

litre
L.S.
L.S.

1.72
2.08
7.93

115.00
1.49
1.49

Day
Day
L.S.
L.S.
L.S.

0.80
0.80
10.01
17.81
101.40

273.00
247.00
1.49
1.49
1.49
Total:
1087.66

Add water charges @ 1% on

Add C.P & OH @15% on

1098.54
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 42.11
Rs 42.10

Item Code: 14.51.1

Painting on rain water, soil, waste and vent pipes and fittings with synthetic paint on old work : 75 mm dia. pipe .

Code

0826
9999
9999
0131
0115
9999
9999
9999
9999

DSR-12

Description
Details of cost for 30 metres
Area = 22/7x81.4 mmx30 m = 7.67 sqm
MATERIALSAluminium paint
Putty, sand paper etc.
Carriage
LABOUR
Painter
Coolie
Putty, sand paper brushes etc.
Sundries
Wire brushes for cleaning
Extra for delay

Details of Cost for : 30.00 Nos

Unit
Quantity

Rate

litre
L.S.
L.S.

0.35
0.39
2.08

115.00
1.49
1.49

Day
Day
L.S.
L.S.
L.S.
L.S.

0.28
0.28
4.16
6.24
4.42
26.91

Add water charges @ 1% on

273.00
247.00
1.49
1.49
1.49
1.49
Total:
251.72

Add C.P & OH @15% on

254.24

Page 594 of 2298

Cost for 30.00 Nos

Rate per Each:
Rate as per DSR-12:

Rs 9.75
Rs 9.75

Item Code: 14.51.2

Painting on rain water, soil, waste and vent pipes and fittings with synthetic paint on old work : 100 mm dia. pipe.

Code

0826
9999
9999
0131
0115
9999
9999
9999
9999

Description
Details of cost for 30 metres
Area = 22/7x106.4 mmx30 m = 10.032 sqm
MATERIALSAluminium paint
Putty, sand paper etc.
Carriage
LABOUR
Painter
Coolie
Putty, sand paper brushes etc.
Sundries
Wire brushes for cleaning
Extra for delay

Details of Cost for : 30.00 m

Unit
Quantity

Rate

litre
L.S.
L.S.

0.46
0.52
2.73

115.00
1.49
1.49

Day
Day
L.S.
L.S.
L.S.
L.S.

0.36
0.36
5.33
8.06
5.33
34.06

273.00
247.00
1.49
1.49
1.49
1.49
Total:
323.58

Add water charges @ 1% on

Add C.P & OH @15% on

326.82
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 12.53
Rs 12.55

Item Code: 14.51.3

Painting on rain water, soil, waste and vent pipes and fittings with synthetic paint on old work : 150 mm dia. pipe.

Code

0826
9999
9999
0131
0115
9999
9999
9999
9999

Description
Details of cost for 30 metres
Area = 22/7x157.2 mmx30 m = 14.82 sqm
MATERIALSAluminium paint
Putty, sand paper etc.
Carriage
LABOUR
Painter
Coolie
Putty, sand paper brushes etc.
Sundries
Wire brushes for cleaning
Extra for delay

Details of Cost for : 30.00 m

Unit
Quantity

Rate

litre
L.S.
L.S.

0.68
0.65
3.90

115.00
1.49
1.49

Day
Day
L.S.
L.S.
L.S.
L.S.

0.53
0.53
7.93
11.96
7.15
40.30

273.00
247.00
1.49
1.49
1.49
1.49
Total:
460.92

Add water charges @ 1% on

Add C.P & OH @15% on

465.53
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 17.85
Rs 17.85

Page 595 of 2298

Item Code: 14.52.1

Painting with oil type wood preservative : Old work (one or more coats).
Code

0859
9999
0131
0115
9999
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
Details of cost for 10 sqm
MATERIALS
Oil type wood preservative
Carriage of material
LABOUR
Painter
Coolie
Brushes etc
Sundries

Rate

litre
L.S.

0.81
0.52

70.00
1.49

Day
Day
L.S.
L.S.

0.11
0.11
2.73
2.73

273.00
247.00
1.49
1.49
Total:
122.81

Add water charges @ 1% on

Add C.P & OH @15% on

124.04
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 14.27
Rs 14.25

Item Code: 14.53.1

Wall painting with plastic emulsion pait : On old work .
Code

0835
9999
0131
0115
9999
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
Details of cost for 10sqm
MATERIALS
Plastic emulsion paint
Materials for filling in holes and cracks (putty etc)
Carriage of material L.S.
LABOUR
Painter
Coolie
Brushes, sand paper etc L.S.
Sundries

litre

Rate

L.S.

0.73
0.00
5.33

165.00
0.00
1.49

Day
Day
L.S.
L.S.

0.36
0.36
8.06
6.76

273.00
247.00
1.49
1.49
Total:
337.67

Add water charges @ 1% on

Add C.P & OH @15% on

341.05
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 39.22
Rs 39.30

Item Code: 14.54.1

Painting with synthetic enamel paint - : One or more coats on old work.
Code

DSR-12

Description

0833
9999

MATERIALS:
Synthetic enamel paint - black / chocolate color.
Carraige of paint and materials

0131
0115

LABOUR:
Painter
Coolie

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre

0.70

130.00

L.S.

0.52

1.49

Day
Day

0.36
0.36

273.00
247.00

Page 596 of 2298

9999
9999

Putty
Brushes and sand paper

9999

Sundries

L.S.

2.73

1.49

L.S.
L.S.

5.33
8.06

1.49
1.49
Total:
302.99

Add water charges @ 1% on

Add C.P & OH @15% on

306.02
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 35.19
Rs 35.20

Item Code: 14.55.1

Painting with aluminium : On old work .
Code
0826
9999
9999
0131
0115
9999
9999

Description
MATERIALS
Aluminium paint
Carriage of paint and material
Putty etc
LABOUR
Painter
Coolie
Brushes, sand paper etc
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
L.S.
L.S.

0.46
0.52
2.73

115.00
1.49
1.49

Day
Day
L.S.
L.S.

0.36
0.36
5.33
8.06

273.00
247.00
1.49
1.49
Total:
264.89

Add water charges @ 1% on

Add C.P & OH @15% on

267.54
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 30.77
Rs 30.75

Item Code: 14.56.1

Painting acid proof paint : On old work .
Code
0827
9999
9999
0131
0115
9999
9999

Description
MATERIALS
Acid proof paint
Carriage of paint
Putty etc
LABOUR
Painter
Coolie
Brushes, sand paper etc
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
L.S.
L.S.

0.70
0.52
2.73

105.00
1.49
1.49

Day
Day
L.S.
L.S.

0.36
0.36
5.33
8.06

273.00
247.00
1.49
1.49
Total:
285.49

Add water charges @ 1% on

Add C.P & OH @15% on

288.34
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 33.16
Rs 33.15

Page 597 of 2298

Item Code: 14.57.1

Painting with black anti- corrosive bitumastic paint : One or more coats on old work.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
0828
Black anticorrosive bitumastic paint
litre
0.57
9999
Carriage
L.S.
0.52
LABOUR
0131
Painter
Day
0.36
0115
Coolie
Day
0.36
9999
Putty, brushes, sand paper etc
L.S.
5.33
9999
Sundries
L.S.
8.06
Add water charges @ 1% on

Rate
85.00
1.49
273.00
247.00
1.49
1.49
Total:
256.37

Add C.P & OH @15% on

258.93
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 29.78
Rs 29.80

Item Code: 14.58.1

French spirit Polishing : On old work.
Code
1000
0999
9999
9999
9999
0131
9999

Description
MATERIALSSpirit
Shellac
Carriage of materials
Turpentine oil sand paper cotton/woolen cloth
putty etc.
Linseed oil
LABOUR
Painter
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
kilog
L.S.
L.S.

0.98
0.13
0.91
10.79

65.00
205.00
1.49
1.49

L.S.

0.52

1.49

Day
L.S.

1.76
8.06

273.00
1.49
Total:
601.05

Add water charges @ 1% on

Add C.P & OH @15% on

607.06
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 69.81
Rs 69.80

Item Code: 14.59.1

Polishing on wood work with ready made wax polish : Old work.
Code
0855
9999
0131
0115
9999
9999

Description
MATERIALS
Ready made Wax polish
Carriage L.S.
LABOUR
Painter
Coolie
Soap, brushes, cloth etc
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
kilog
L.S.

0.25
0.39

175.00
1.49

Day
Day
L.S.
L.S.

0.40
0.40
4.16
4.42

273.00
247.00
1.49
1.49
Total:
265.12

Add water charges @ 1% on

DSR-12

Rate

Page 598 of 2298

Add C.P & OH @15% on

267.77
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 30.79
Rs 30.80

Item Code: 14.60

Re-lettering with black Japan paint.
Code

0829

0131
0115
9999
9999

Description
Detail of cost for 100 letters of 15 cm height
MATERIALS
Paint (Black Japan)
Carriage
LABOUR
Painter
Coolie
Painting brushes, turpentine, stencil etc
Sundires

Details of Cost for : 1500.00 units

Unit
Quantity

Rate

litre

0.37
0.52

90.00
0.00

Day
Day
L.S.
L.S.

4.00
1.00
7.15
8.06

273.00
247.00
1.49
1.49
Total:
1394.96

Add water charges @ 1% on

Add C.P & OH @15% on

1408.91
Cost for 1500.00 units
Rate per Units:
Rate as per DSR-12:

Rs 1.08
Rs 1.10

Item Code: 14.61

Painting (one or more coats) with black Japan paint.
Code
0829
9999
9999
0131
0115
9999
9999

Description
MATERIALSBlack Japan Paint
Carriage
Putty etc.
LABOUR
Painter
Coolie
Brushes, sand paper etc.
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
L.S.
L.S.

0.70
0.52
2.73

90.00
1.49
1.49

Day
Day
L.S.
L.S.

0.36
0.36
5.33
8.06

273.00
247.00
1.49
1.49
Total:
274.99

Add water charges @ 1% on

Add C.P & OH @15% on

277.74
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 31.94
Rs 31.95

Item Code: 14.62.1

P/F CP brass chain and rubber plug complete for sink or wash basin : 32 mm dia.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Detail of cost for one no.
MATERIALS-

DSR-12

Rate

Page 599 of 2298

1314
9999

C.P. brass chain with 32 mm dia rubber plug

Carriage of materials and fixing charges

each
L.S.

1.00
8.06

Add water charges @ 1% on

26.00
1.49
Total:
38.01

Add C.P & OH @15% on

38.39
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 44.15
Rs 44.15

Item Code: 14.62.2

P/F CP brass chain and rubber plug complete for sink or wash basin : 40 mm dia.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS1315
C.P. brass chain with 40 mm dia rubber plug
each
1.00
9999
Carriage of materials and fixing charges
L.S.
8.06
Add water charges @ 1% on

Rate
27.00
1.49
Total:
39.01

Add C.P & OH @15% on

39.40
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 45.31
Rs 45.30

Item Code: 14.63.1

Distempering with Ist quality acrylic distemper (ready made) of approved manufacturer: One or more coats on old work.

Code
0816
9999
9999
0131
0114
9999

Description
MATERIALS
Oil bound washable distemper/ Acrylic distemper
Brushes, putty etc
Sundries including carriage of material
LABOUR
Painter
Beldar
Sundires

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

kilog
L.S.
L.S.

1.00
0.52
10.76

42.00
1.49
1.49

Day
Day
L.S.

0.22
0.22
7.15

273.00
247.00
1.49
Total:
183.85

Add water charges @ 1% on

Add C.P & OH @15% on

185.69
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 21.35
Rs 21.35

Item Code: 14.64.1

Finishing walls with water proofing cement paint : Old work (one or more coats applied @ 2.20Kg/10Sqm) over & i/c primer @
0.8l/10 Sqm.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
0851
Water proofing cement paint
kilog
2.20
40.00
8508
Primer for cement paint
litre
0.80
63.00

DSR-12

Page 600 of 2298

9999
0131
0115
0101
9999
9999

Carriage of material
LABOUR
Painter
Coolie
Bhisti
Brushes, sand paper etc
Sundries

L.S.

1.56

1.49

Day
Day
Day
L.S.
L.S.

0.46
0.23
0.05
7.15
8.06

273.00
247.00
260.00
1.49
1.49
Total:
358.77

Add water charges @ 1% on

Add C.P & OH @15% on

362.36
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 41.67
Rs 41.65

Item Code: 14.64.2

Finishing walls with water proofing cement paint of required shade : Old work (one or more coats @ 2.20 kg/10 sqm) complete

Code
0851
9999
0131
0115
0101
9999
9999

Description
MATERIALS:
Water proofing cement paint
Carriage
LABOUR:
Painter
Coolie
Bhisti
Brushes, Sand paper etc.,
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

kilog
L.S.

2.20
1.10

40.00
1.49

Day
Day
Day
L.S.
L.S.

0.35
0.12
0.05
3.15
8.06

273.00
247.00
260.00
1.49
1.49
Total:
244.53

Add water charges @ 1% on

Add C.P & OH @15% on

246.98
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 28.40
Rs 28.40

Item Code: 14.65.1

Finishing walls with exterior paint: Old work (two or more coats on existing cement paint surface applied @ 3.28 Kg/10 Sqm).

Code
8507
9999
0131
0115
9999
9999

Description
MATERIALS
Textured exterior paint
Carriage of material
LABOUR
Painter
Coolie
Brushes, sand paper etc
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
L.S.

3.28
1.56

198.00
1.49

Day
Day
L.S.
L.S.

0.46
0.23
7.15
8.06

273.00
247.00
1.49
1.49
Total:
856.81

Add water charges @ 1% on

Add C.P & OH @15% on

865.38
Cost for 10.00 Sqm

DSR-12

Page 601 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 99.52
Rs 99.50

Item Code: 14.65.2

Finishing walls with exterior paint: Old work (one or more coats) applied @ 1.82 Ltr./10 Sqm).
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS
8507
Textured exterior paint
litre
1.82
9999
Carriage of material
L.S.
0.52
LABOUR
0131
Painter
Day
0.33
0115
Coolie
Day
0.17
9999
Brushes, sand paper etc
L.S.
7.15
9999
Sundries
L.S.
8.06
Add water charges @ 1% on

Rate
198.00
1.49
273.00
247.00
1.49
1.49
Total:
515.87

Add C.P & OH @15% on

521.03
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 59.92
Rs 59.90

Item Code: 14.66.1

Finishing walls with Acrylic smooth exterior paint : old work (Two or more coats applied @ 1.67 Ltr/10Sqm) on existing cement
paint surface.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
8505
Acrylic exterior paint
litre
1.67
130.00
9999
Carriage of material
L.S.
0.91
1.49
LABOUR
0131
Painter
Day
0.46
273.00
0115
Coolie
Day
0.23
247.00
9999
Brushes, sand paper etc
L.S.
4.81
1.49
9999
Sundries
L.S.
5.33
1.49
Total:
Add water charges @ 1% on
415.96
Add C.P & OH @15% on
420.12
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 48.31
Rs 48.30

Item Code: 14.66.2

Finishing walls with Acrylic smooth exterior paint : Old work (one or more coats) applied @ 0.90 Ltr./10 Sqm).

Code
8505
9999
0131
0115

DSR-12

Description
MATERIALS
Acrylic exterior paint
Carriage of material
LABOUR
Painter
Coolie

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
L.S.

0.90
0.52

130.00
1.49

Day
Day

0.33
0.17

273.00
247.00

Page 602 of 2298

9999
9999

Brushes, sand paper etc

Sundries

L.S.
L.S.

7.15
8.06

Add water charges @ 1% on

1.49
1.49
Total:
272.51

Add C.P & OH @15% on

275.24
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 31.65
Rs 31.65

Item Code: 14.67.1

Finishing walls with Premium Acrylic Smooth Silicone additives: old work (one or more coats applied @ 1.43 Ltr/10Sqm) on existing
cement paint surface.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
8506
Premium Acrylic exterior paint
litre
1.43
230.00
9999
Carriage of material
L.S.
1.04
1.49
LABOUR
0131
Painter
Day
0.46
273.00
0115
Coolie
Day
0.23
247.00
9999
Brushes, sand paper etc
L.S.
7.15
1.49
9999
Sundries
L.S.
8.06
1.49
Total:
Add water charges @ 1% on
535.50
Add C.P & OH @15% on
540.86
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 62.20
Rs 62.20

Item Code: 14.67.2

Finishing walls with Premium Acrylic Smooth Silicone additives: Old work (one or more coats) applied @ 0.83 Ltr./10 Sqm).

Code
8506
9999
0131
0115
9999
9999

Description
MATERIALS
Premium Acrylic exterior paint
Carriage of material
LABOUR
Painter
Coolie
Brushes, sand paper etc
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
L.S.

0.83
0.91

230.00
1.49

Day
Day
L.S.
L.S.

0.33
0.17
7.15
8.06

273.00
247.00
1.49
1.49
Total:
347.00

Add water charges @ 1% on

Add C.P & OH @15% on

350.47
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 40.30
Rs 40.30

Item Code: 14.69.1

Varnishing with varnish: One or more coats with copal varnish.

DSR-12

Page 603 of 2298

Code
0857
9999
9999
0131
0115
9999
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS
Superior copal varnish
Carriage
Repair to the surface
LABOUR
Painter
Coolie
Brushes, sand
Sundries

Rate

litre
L.S.
L.S.

0.70
0.52
2.73

125.00
1.49
1.49

Day
Day
L.S.
L.S.

0.36
0.36
5.33
2.73

273.00
247.00
1.49
1.49
Total:
291.55

Add water charges @ 1% on

Add C.P & OH @15% on

294.47
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 33.86
Rs 33.85

Item Code: 14.69.2

Varnishing with varnish: One or more coats with spar varnish.
Code
0858
9999
9999
0131
0114
9999
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIALS
Superior spar varnish
Carriage
Repair etc
LABOUR
Painter
Coolie
Brushes, sand paper etc
Sundries

Rate

litre
L.S.
L.S.

0.75
0.52
2.73

125.00
1.49
1.49

Day
Day
L.S.
L.S.

0.36
0.36
2.73
4.16

273.00
247.00
1.49
1.49
Total:
296.06

Add water charges @ 1% on

Add C.P & OH @15% on

299.02
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 34.39
Rs 34.40

Item Code: 14.70

Melamine polishing on wood work (one or more coats).
Code

7241
0006
9999
0131
0115
9999

Description
Details of cost for 10sqm
MATERIALS
Melamine polish
Hire charges of Spraying machine including electric charges
Carriage charge of Machine & Marerial
LABOUR
Painter
Beldar
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

litre
Day

0.65
0.78

250.00
250.00

L.S.

4.42

1.49

Day
Day
L.S.

0.35
0.35
4.42

273.00
247.00
1.49
Total:
552.68

Add water charges @ 1% on

DSR-12

Rate

Page 604 of 2298

Add C.P & OH @15% on

558.21
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 64.19
Rs 64.20

Item Code: 14.71

Varnishing with flatting varnish one or more coats on old work.
Code
0856
9999
9999
9999
0131
0115

Description
MATERIALS
Flatting varnish
Glue, putty etc
Carriage
Painting brushes, turpentine, stencil etc
LABOUR
Painter
Coolie

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
L.S.
L.S.
L.S.

0.70
2.73
1.82
24.18

65.00
1.49
1.49
1.49

Day
Day

0.36
0.36

273.00
247.00
Total:
275.51

Add water charges @ 1% on

Add C.P & OH @15% on

278.27
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 32.00
Rs 32.00

Item Code: 14.72

P/F double sacffolding system (cuplock type)on the exterior side, upto seven story height made with 40 mm dia. MS tube 1.50 m
c/c horizontal and vertical tubes joining with cup and lock system.

Code
14.72X

2205
0116
0114
9999

Details of Cost for : 202.50 Sqm

Description
Unit
Quantity
Rate
Details of Cost for Area : 22.5m x 9.0m = 202.50 Sqm
Cost of scaffolding materials for using once in the item code Nos
1.00
7820.65
14.72
40mm dia MS pipe = 3765.42 kg
25mm box spigot = 123.98 kg
Nuts and bolts = 37.80 kg
Clamps 120Nos @ 1 kg/each =120kg
Challies 90 Nos @ 15 kg/ each =1350 kg
cuplocks 1314 Nos @ 0.5 kg/each = 657 kg
Total = 6054.20 kg Say 6.054 MT

Carraige of Steel
Fitter (grade 1)
Beldar
Sundries

tonne
Day
Day
L.S.

6.054
15.50
31.00
1035.00

Add water charges @ 1% on

77.87
301.00
247.00
1.49
Total:
22156.72

Add C.P & OH @15% on

22378.29
Cost for 202.50 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 127.09
Rs 127.10

Page 605 of 2298

Item Code: 14.73

Providing and fixing bright finished brass casement window fasteners or peg stays to windows/ ventilators with necessary welding
and machine screws etc. complete.
Details of Cost for : 2.00 Kg
Code
Description
Unit
Quantity
Rate
Details of Cost for te (10 x 0.20 = 2.00 kg)
0423
Brass casement window fastener
Each
10.00
45.00
9999
Fixing charges including welding and materials etc.,
L.S.
125.58
1.49
9999
Carriage of materials
L.S.
3.64
1.49
Total:
Add water charges @ 1% on
642.53
Add C.P & OH @15% on
648.96
Cost for 2.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 373.15
Rs 373.15

Item Code: 14.74

Providing and fixing 14 mm bright finished brass spring catch to steel centre hung ventilators with necessary welding and machine
screws etc
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Rate
MATERIALS:
0428
Brass fanlight catch
10 No
10.00
170.00
9999
Fixing charge including welding and materials etc.,
L.S.
125.58
1.49
9999
Carriage of material
L.S.
3.64
1.49
Total:
Add water charges @ 1% on
362.53
Add C.P & OH @15% on
366.16
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 42.11
Rs 42.10

Item Code: 15.1

Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day
L.S.

0.44
0.37
1.04

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
201.62

Add C.P & OH @15% on

203.64
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 234.19
Rs 234.20

Item Code: 15.2.1

Demolishing cement concrete: 1 : 3 : 6 or richer.
Details of Cost for : 1.00 Cum

DSR-12

Page 606 of 2298

Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Unit

Quantity

Rate

Day
Day
L.S.

1.59
0.72
4.81

247.00
247.00
1.49
Total:
577.74

Add water charges @ 1% on

Add C.P & OH @15% on

583.52
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 671.05
Rs 671.05

Item Code: 15.2.2

Demolishing cement concrete: 1 : 4 : 8 or leaner.
Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day
L.S.

0.88
0.55
1.95

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
356.12

Add C.P & OH @15% on

359.68
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 413.63
Rs 413.65

Item Code: 15.3

Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day
L.S.

2.65
0.72
7.02

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
842.85

Add C.P & OH @15% on

851.28
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 978.97
Rs 978.95

Item Code: 15.4

Demolishing R.B. work i/c stacking of steel bars.
Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day
L.S.

2.12
0.90
4.68

Add water charges @ 1% on

DSR-12

Rate
247.00
247.00
1.49
Total:
752.91

Page 607 of 2298

Add C.P & OH @15% on

760.44
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 874.51
Rs 874.50

Item Code: 15.5

Extra for cutting reinforce- ment bars in RCC or R.B work.
Code

0103
0114
9999

Description
R.C.C. or R.B. workReinforced area
considering 1% reinforcement = 0.01 sqm
LABOUR
For cutting 0.01 sqm reinforcement
Blacksmith 2nd class
Beldar
Sundries

Details of Cost for : 1.00 Sqm

Unit
Quantity

Day
Day
L.S.

0.50
0.50
13.39

Add water charges @ 1% on

Rate

273.00
247.00
1.49
Total:
279.95

Add C.P & OH @15% on

282.75
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 325.16
Rs 325.15

Item Code: 15.6

Extra for screpping reinfor- cement.
Code

0103
0114
9999

Description
Detail of cost for 10 Nos
6 metres long 16 mm dia bars @ 1.58 kg/metre
Total weight = 94.80 kg = 0.948 quintal
LABOUR
Blacksmith 2nd class
Beldar
Sundries

Details of Cost for : 94.80 Kg

Unit
Quantity

Day
Day
L.S.

0.25
0.50
13.39

Add water charges @ 1% on

Rate

273.00
247.00
1.49
Total:
211.70

Add C.P & OH @15% on

213.82
Cost for 94.80 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 2.59
Rs 2.60

Item Code: 15.7.1

Demolishing brick work : In mud mortar.
Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day
L.S.

0.30
0.37
1.04

Add water charges @ 1% on

DSR-12

Rate
247.00
247.00
1.49
Total:
167.04

Page 608 of 2298

Add C.P & OH @15% on

168.71
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 194.02
Rs 194.00

Item Code: 15.7.2

Demolishing brick work : In lime mortar with old mughal bricks.
Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day
L.S.

1.24
0.46
1.04

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
421.45

Add C.P & OH @15% on

425.66
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 489.51
Rs 489.50

Item Code: 15.7.3

Demolishing brick work : In lime mortar.
Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day
L.S.

0.44
0.37
1.04

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
201.62

Add C.P & OH @15% on

203.64
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 234.19
Rs 234.20

Item Code: 15.7.4

Demolishing brick work : In cement mortar.
Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day
L.S.

1.06
0.90
2.47

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
487.80

Add C.P & OH @15% on

492.68
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

DSR-12

Rs 566.58
Rs 566.60

Page 609 of 2298

Item Code: 15.8.1

Removing mortar from bricks : From brick work in mud mortar.
Code
0114
0115
0124
9999

Description
LABOUR
Beldar
Coolie
Mason 2nd class
Sundries

Details of Cost for : 1000.00 Units

Unit
Quantity
Day
Day
Day
L.S.

2.40
1.60
0.40
1.82

Add water charges @ 1% on

Rate

247.00
247.00
273.00
1.49
Total:
1099.91

Add C.P & OH @15% on

1110.91
Cost for 1000.00 Units
Rate per 1000 Nos:
Rate as per DSR-12:

Rs 1277.55
Rs 1277.55

Item Code: 15.8.2

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m - From brick work in lime mortar

Code
0114
0115
0124
9999

Description
LABOUR:
Beldar
Coolie
Mason (brick layer) 2nd class
Sundries

Details of Cost for : 1000.00 Units

Unit
Quantity
Day
Day
Day
L.S.

2.80
1.40
0.80
8.97

Add water charges @ 1% on

Rate

247.00
247.00
273.00
1.49
Total:
1269.17

Add C.P & OH @15% on

1281.86
Cost for 1000.00 Units
Rate per 1000 Nos:
Rate as per DSR-12:

Rs 1474.14
Rs 1474.15

Item Code: 15.8.3

Removing mortar from bricks : From brick work in cement mortar
Code
0114
0115
0124
9999

Description
LABOUR
Beldar
Coolie
Mason 2nd class
Sundries

Details of Cost for : 1000.00 Units

Unit
Quantity
Day
Day
Day
L.S.

3.50
1.50
1.24
8.06

Add water charges @ 1% on

Rate

247.00
247.00
273.00
1.49
Total:
1585.53

Add C.P & OH @15% on

1601.39
Cost for 1000.00 Units
Rate per 1000 Nos:
Rate as per DSR-12:

DSR-12

Rs 1841.60
Rs 1841.60

Page 610 of 2298

Item Code: 15.9.1

Demolishing stone rubble masonry : In lime mortar.
Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day
L.S.

0.61
0.49
1.95

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
274.61

Add C.P & OH @15% on

277.36
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 318.96
Rs 318.95

Item Code: 15.9.2

Demolishing stone rubble masonry : In cement mortar.
Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day
L.S.

1.30
1.04
2.73

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
582.05

Add C.P & OH @15% on

587.87
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 676.05
Rs 676.05

Item Code: 15.10.1

Dismantling dressed stone work ashlar face stone, marble work or precast concrete work : In lime mortar.
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
LABOUR
0114
Beldar
Day
0.78
0115
Coolie
Day
0.61
9999
Sundries
L.S.
2.73
Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
347.40

Add C.P & OH @15% on

350.87
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 403.50
Rs 403.50

Item Code: 15.10.2

Dismantling dressed stone work ashlar face stone, marble work or precast concrete work : In cement mortar.
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
LABOUR
0114
Beldar
Day
1.55
247.00

DSR-12

Page 611 of 2298

0115
9999

Coolie
Sundries

Day
L.S.

1.19
2.73

Add water charges @ 1% on

247.00
1.49
Total:
680.85

Add C.P & OH @15% on

687.66
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 790.81
Rs 790.80

Item Code: 15.11.1

Removing mortar from stones and cleaning stones : In lime mortar.
Code
0124
0114
0115
9999

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
LABOUR
Mason 2nd class
Beldar
Coolie
Sundries

Day
Day
Day
L.S.

0.05
0.20
0.20
0.52

Add water charges @ 1% on

Rate
273.00
247.00
247.00
1.49
Total:
113.22

Add C.P & OH @15% on

114.35
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 131.50
Rs 131.50

Item Code: 15.11.2

Removing mortar from stones and cleaning stones : In cement mortar.
Code
0124
0114
0115
9999

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
LABOUR
Mason (brick layer) 2nd class
Beldar
Coolie
Sundries

Day
Day
Day
L.S.

0.05
0.40
0.20
0.91

Add water charges @ 1% on

Rate
273.00
247.00
247.00
1.49
Total:
163.21

Add C.P & OH @15% on

164.84
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 189.57
Rs 189.55

Item Code: 15.12.1

Dismantling doors, windows & C.S. windows shutter : Of area 3 sqm.
Code
0124
0114
0103
9999

DSR-12

Description
LABOUR
Mason 2nd class
Beldar
Blacksmith 2nd class
Sundries

Details of Cost for : 1.00 No.

Unit
Quantity
Day
Day
Day
L.S.

0.10
0.18
0.05
1.43

Rate
273.00
247.00
273.00
1.49
Total:

Page 612 of 2298

Add water charges @ 1% on

87.54

Add C.P & OH @15% on

88.42
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 101.68
Rs 101.70

Item Code: 15.12.2

Dismantling doors, windows & C.S. windows shutter : Of area beyond 3 sqm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Detail of cost for each
0124
Mason (brick layer) 2nd class
Day
0.13
0114
Beldar
Day
0.25
0103
Blacksmith 2nd class
Day
0.07
9999
Sundries
L.S.
2.73
Refixing of collapsible gate including mending good the
demaged floor, wall
Add water charges @ 1% on

Rate
273.00
247.00
273.00
1.49

Total:
120.42

Add C.P & OH @15% on

121.62
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 139.86
Rs 139.85

Item Code: 15.13.1

Taking out door, windows : Of area 3 sqm.
Code

0112
0114
9999

Description
Detail of cost for each
LABOUR
Carpenter 2nd class
Beldar
Sundries

Details of Cost for : 1.00 No.

Unit
Quantity

Day
Day
L.S.

0.05
0.08
0.52

Add water charges @ 1% on

Rate

273.00
247.00
1.49
Total:
34.18

Add C.P & OH @15% on

34.52
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 39.70
Rs 39.70

Item Code: 15.13.2

Taking out door, windows : Of area byond 3 sqm.
Code
0112
0114
9999

Description
LABOUR
Carpenter 2nd class
Beldar
Sundries

Details of Cost for : 1.00 No.

Unit
Quantity
Day
Day
L.S.

0.07
0.10
0.91

Add water charges @ 1% on

DSR-12

Rate
273.00
247.00
1.49
Total:
45.17

Page 613 of 2298

Add C.P & OH @15% on

45.62
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 52.46
Rs 52.45

Item Code: 15.14.1

Dismantling wood work in frames : Of sectinal area 40 Sqcm and above.
Code
0112
0114
9999

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
LABOUR
Carpenter 2nd class
Beldar
Sundries

Day
Day
L.S.

2.00
2.00
13.39

Add water charges @ 1% on

Rate
273.00
247.00
1.49
Total:
1059.95

Add C.P & OH @15% on

1070.55
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 1231.13
Rs 1231.15

Item Code: 15.14.2

Dismantling wood work in frames : Of sectional area below 40 sqcm.
Code

0112
0114
9999

Description
Detail of cost for 10.00 m.
LABOUR
Carpenter 2nd class
Beldar
Sundries

Details of Cost for : 10.00 m

Unit
Quantity

Day
Day
L.S.

0.08
0.08
0.52

Add water charges @ 1% on

Rate

273.00
247.00
1.49
Total:
42.37

Add C.P & OH @15% on

42.79
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 4.92
Rs 4.90

Item Code: 15.15.1

Extra for dismantling trusses rafters in span : Of sectional area 40 sqcm and above.
Details of Cost for : 1.00 units
Code
Description
Unit
Quantity
Detail of cost for 1 cum for every additional span of 1 metre

0103
0114
9999

LABOUR
Blacksmith 2nd class
Beldar
Sundries

Day
Day
L.S.

0.20
0.30
13.39

Add water charges @ 1% on

Rate

273.00
247.00
1.49
Total:
148.65

Add C.P & OH @15% on

150.14
Cost for 1.00 units

DSR-12

Page 614 of 2298

Rate per Cum/mtr:

Rate as per DSR-12:

Rs 172.66
Rs 172.65

Item Code: 15.15.2

Extra for dismantling trusses rafters in span : Of sectional area below 40 sqcm.
Details of Cost for : 10.00 unit
Code
Description
Unit
Quantity
Detail of cost for 10.00 metre for every additional span of 1
metre
LABOUR
0103
Blacksmith 2nd class
Day
0.006
0114
Beldar
Day
0.008
9999
Sundries
L.S.
0.39
Add water charges @ 1% on

Rate

273.00
247.00
1.49
Total:
4.20

Add C.P & OH @15% on

4.24
Cost for 10.00 unit
Rate per Units:
Rate as per DSR-12:

Rs 0.49
Rs 0.50

Item Code: 15.16.1

Extra for dismantling reusses rafters in height : Of sectional area 40 sqcm and above.
Details of Cost for : 1.00 unit
Code
Description
Unit
Quantity
Detail of cost for 1 cum for every additional height of 1 metre

0103
0114
9999

LABOUR
Blacksmith 2nd class
Beldar
Sundries

Day
Day
L.S.

0.25
0.50
13.39

Add water charges @ 1% on

Rate

273.00
247.00
1.49
Total:
211.70

Add C.P & OH @15% on

213.82
Cost for 1.00 unit
Rate per Units:
Rate as per DSR-12:

Rs 245.89
Rs 245.90

Item Code: 15.16.2

Extra for dismantling reusses rafters in height : Of sectional area blow 40 sqcm.
Details of Cost for : 10.00 unit
Code
Description
Unit
Quantity
Detail of cost for 10.00 metre for every additional height of 1
metre
LABOUR:
0103
Blacksmith 2nd class
Day
0.01
0114
Beldar
Day
0.02
9999
Sundries
L.S.
0.39
Add water charges @ 1% on

Rate

273.00
247.00
1.49
Total:
8.25

Add C.P & OH @15% on

8.33
Cost for 10.00 unit

DSR-12

Page 615 of 2298

Rate per Units:

Rate as per DSR-12:

Rs 0.96
Rs 0.95

Item Code: 15.17.1

Dismantling steel work in single sections : R.S. joists.
Code

0103
0100
0114
9999

Details of Cost for : 100.00 Kg

Unit
Quantity

Description
Detail of cost for 1 quintal
LABOUR
Blacksmith 2nd class
Bandhani
Beldar
Sundries

Day
Day
Day
L.S.

0.05
0.10
0.15
2.73

Add water charges @ 1% on

Rate

273.00
260.00
247.00
1.49
Total:
80.77

Add C.P & OH @15% on

81.58
Cost for 100.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 0.94
Rs 0.95

Item Code: 15.17.2

Dismantling steel work in single sections : Channels, Angles, flats.
Code
0103
0100
0114
9999

Details of Cost for : 100.00 Kg

Unit
Quantity

Description
LABOUR:
Blacksmith 2nd class
Bandhani
Beldar
Sundries

Day
Day
Day
L.S.

0.05
0.05
0.10
2.73

Add water charges @ 1% on

Rate
273.00
260.00
247.00
1.49
Total:
55.42

Add C.P & OH @15% on

55.97
Cost for 100.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 0.64
Rs 0.65

Item Code: 15.18

Dismantling steel work in built up sections i/c disme- mbering and stacking.
Code

0103
0100
0114
9999

Description
Detail of cost for 1 quintal
LABOUR
Blacksmith 2nd class
Bandhani
Beldar
Sundries

Details of Cost for : 100.00 Kg

Unit
Quantity

Day
Day
Day
L.S.

0.15
0.10
0.25
4.16

Add water charges @ 1% on

Rate

273.00
260.00
247.00
1.49
Total:
134.90

Add C.P & OH @15% on

136.25
Cost for 100.00 Kg
Rate per One Kg:

DSR-12

Rs 1.57

Page 616 of 2298

Rate as per DSR-12:

Rs 1.55

Item Code: 15.19

Dismantling steel work in built up sections without dismembering.
Code

0100
0114
9999

Description
Detail of cost for 1 quintal
LABOUR
Bandhani
Beldar
Sundries

Details of Cost for : 100.00 Kg

Unit
Quantity

Day
Day
L.S.

0.10
0.25
2.73

Add water charges @ 1% on

Rate

260.00
247.00
1.49
Total:
91.82

Add C.P & OH @15% on

92.74
Cost for 100.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 1.07
Rs 1.05

Item Code: 15.20

Extra for dismantling trusses rafter in addi. span.
Code

0100
0114
9999

Description
Detail of cost for 1 quintal for every additional
span of 1 metre beyond 10 metre
LABOUR
Bandhani
Beldar
Sundries

Details of Cost for : 100.00 unit

Unit
Quantity

Day
Day
L.S.

0.02
0.06
0.39

Add water charges @ 1% on

Rate

260.00
247.00
1.49
Total:
20.60

Add C.P & OH @15% on

20.81
Cost for 100.00 unit
Rate per Units:
Rate as per DSR-12:

Rs 0.24
Rs 0.25

Item Code: 15.21

Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5
metres.
Details of Cost for : 100.00 units
Code
Description
Unit
Quantity
Rate
Detail of cost for 1 quintal for every additional
height of 1 metre beyond 5 metre
LABOUR
0100
Bandhani
Day
0.02
260.00
0114
Beldar
Day
0.06
247.00
9999
Sundries
L.S.
0.39
1.49
Total:
Add water charges @ 1% on
20.60
Add C.P & OH @15% on
20.81
Cost for 100.00 units
Rate per Units:

DSR-12

Rs 0.24

Page 617 of 2298

Rate as per DSR-12:

Rs 0.25

Item Code: 15.22

Extra for making of structural steel work required to be reerected.
Code

0130
0114

Description
Detail of cost for 1 quintal
LABOUR
Mistry
Beldar

Details of Cost for : 100.00 Kg

Unit
Quantity

Day
Day

0.20
0.20

Add water charges @ 1% on

Rate

301.00
247.00
Total:
109.60

Add C.P & OH @15% on

110.70
Cost for 100.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 1.27
Rs 1.25

Item Code: 15.23.1

Dismantling tile work in floor roofs laid in cement mortar : For 10 to 25 mm tiles.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Detail of cost for 10 sqm
LABOUR
0124
Mason 2nd class
Day
0.30
0114
Beldar
Day
0.12
0115
Coolie
Day
0.24
9999
Sundries
L.S.
2.73
Add water charges @ 1% on

Rate

273.00
247.00
247.00
1.49
Total:
174.89

Add C.P & OH @15% on

176.64
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 20.31
Rs 20.30

Item Code: 15.23.2

Dismantling tile work in floor roofs laid in cement mortar : For 25 to 40 mm thick.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
LABOUR
0124
Mason (brick layer) 2nd class
Day
0.59
0114
Beldar
Day
0.18
0115
Coolie
Day
0.24
9999
Sundries
L.S.
2.73
Add water charges @ 1% on

Rate
273.00
247.00
247.00
1.49
Total:
268.88

Add C.P & OH @15% on

271.57
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 31.23
Rs 31.25

Page 618 of 2298

Item Code: 15.24

Demolishing dry brick pitching in floors, drains etc.
Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day
L.S.

0.25
1.00
2.73

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
312.82

Add C.P & OH @15% on

315.95
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 363.34
Rs 363.35

Item Code: 15.25

Dismantling stone slab floo- ring laid in cement mortar.
Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
L.S.

1.77
0.75
8.06

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
634.45

Add C.P & OH @15% on

640.79
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 73.69
Rs 73.70

Item Code: 15.26

Demolishing brick tile in terracing.
Code
0124
0114
0115
9999

Description
LABOUR
Mason 2nd class
Beldar
Coolie
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
Day
L.S.

0.54
0.16
0.24
2.47

Add water charges @ 1% on

Rate
273.00
247.00
247.00
1.49
Total:
249.90

Add C.P & OH @15% on

252.40
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 29.03
Rs 29.05

Item Code: 15.27

Code
0114

DSR-12

Description
LABOUR
Beldar

Details of Cost for : 1.00 Cum

Unit
Quantity
Day

0.25

Rate
247.00

Page 619 of 2298

0115
9999

Coolie
Sundries

Day
L.S.

0.62
1.04

Add water charges @ 1% on

247.00
1.49
Total:
216.44

Add C.P & OH @15% on

218.60
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 251.39
Rs 251.40

Item Code: 15.28.1

Dismantling roofing inluding ridges, hips : G.S sheet.
Code
0112
0114
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
LABOUR
Carpenter 2nd class
Beldar
Sundries

Day
Day
L.S.

0.50
1.00
6.76

Add water charges @ 1% on

Rate
273.00
247.00
1.49
Total:
393.57

Add C.P & OH @15% on

397.51
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 45.71
Rs 45.70

Item Code: 15.28.2

Dismantling roofing inluding ridges, hips : Asbestos sheet.
Code
0112
0114
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
LABOUR
Carpenter 2nd class
Beldar
Sundries

Day
Day
L.S.

0.20
0.50
5.33

Add water charges @ 1% on

Rate
273.00
247.00
1.49
Total:
186.04

Add C.P & OH @15% on

187.90
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 21.61
Rs 21.60

Item Code: 15.29

Dismantling stone slab roofing over wooden karries or R.C.C. battens.
Code
0114
0115
9999

DSR-12

Description
LABOUR
Beldar
coolie
Sundries

Details of Cost for : 1.00 Sqm

Unit
Quantity
Day
Day
L.S.

1.77
0.75
8.06

Rate

Add water charges @ 1% on

247.00
247.00
1.49
Total:
634.45

Add C.P & OH @15% on

640.79

Page 620 of 2298

Cost for 1.00 Sqm

Rate per One Sqm:
Rate as per DSR-12:

Rs 736.91
Rs 736.90

Item Code: 15.30

Dismantling jack arch roofing and floors.
Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
L.S.

1.19
1.21
8.06

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
604.81

Add C.P & OH @15% on

610.86
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 70.25
Rs 70.25

Item Code: 15.31

Dismantling tiled roofing with battens boarding etc.
Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
L.S.

1.73
0.25
8.06

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
501.07

Add C.P & OH @15% on

506.08
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 58.20
Rs 58.20

Item Code: 15.32

Demolishing thatch roofing i/c mats, bamboo, jaffari etc.
Code
0114
9999

Description
LABOUR
Beldar
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
L.S.

0.54
3.64

Add water charges @ 1% on

Rate
247.00
1.49
Total:
138.80

Add C.P & OH @15% on

140.19
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 16.12
Rs 16.10

Item Code: 15.33

DSR-12

Page 621 of 2298

Dismantling wooden ballies in posts and struts.

Code
0114
0115
9999

Details of Cost for : 50.00 m

Unit
Quantity

Description
LABOUR
Beldar
Coolie
Sundries

Day
Day
L.S.

0.50
0.50
0.52

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
247.77

Add C.P & OH @15% on

250.25
Cost for 50.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 5.76
Rs 5.75

Item Code: 15.34.1

Dismentling and stacking fencing posts : `T' or `L' iron or pipe.
Code

0114
0115
9999

9999
9999

Details of Cost for : 1.00 No.

Unit
Quantity

Description
Detail of cost for each
LABOUR
Beldar
Coolie
Excavation, transporting and stacking the
posts to the required place within 50 metre lead, refilling the
pit and dressing the same
Extra for lifting of R.C.C. posts being heavier
than L iron and cleaning the posts of stacking concrete
Sundries

Rate

Day
Day
L.S.

0.107
0.067
0.26

247.00
247.00
1.49

L.S.

13.39

1.49

L.S.

1.43

1.49
Total:
65.45

Add water charges @ 1% on

Add C.P & OH @15% on

66.10
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 76.02
Rs 76.00

Item Code: 15.34.2

Dismentling and stacking fencing posts : R.C.C..
Code

0114
0115
9999
9999
9999
9999

Description

Details of Cost for : 1.00 No.

Unit
Quantity

Detail of cost for each

LABOUR
Beldar
Day
Coolie
Day
Sundries
L.S.
Excavation, transporting and stacking the posts to the L.S.
required place within 50 metre-s
Extra for lifting of R.C.C. posts being heavier than L iron and L.S.
cleaning the posts of stac
Sundries
L.S.

Rate

0.097
0.06
0.26
13.39

247.00
247.00
1.49
1.49

8.06

1.49

2.73

1.49
Total:
75.20

Add water charges @ 1% on

Add C.P & OH @15% on

75.95
Cost for 1.00 No.

DSR-12

Page 622 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 87.34
Rs 87.35

Item Code: 15.35

Cutting ballies or wooden posts of fencing.
Code
9999
9999

Description
Detail of cost for 1ballie (post)
Cutting
Transporting and stacking

Details of Cost for : 1.00 No.

Unit
Quantity
L.S.
L.S.

2.73
1.43

Add water charges @ 1% on

Rate
1.49
1.49
Total:
6.20

Add C.P & OH @15% on

6.26
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 7.20
Rs 7.20

Item Code: 15.36

Code

0114
9999

Description
Detail of cost for 1 quintal
LABOUR
Beldar
Sundries

Details of Cost for : 100.00 Kg

Unit
Quantity

Day
L.S.

3.50
5.33

Add water charges @ 1% on

Rate

247.00
1.49
Total:
872.44

Add C.P & OH @15% on

881.16
Cost for 100.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 10.13
Rs 10.15

Item Code: 15.37

Dismantling wooden trellis work excluding frames.
Code
0124
0114
0115
9999

Description
LABOUR
Mason 2nd class
Beldar
Coolie
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
Day
L.S.

0.10
0.25
0.25
2.73

Add water charges @ 1% on

Rate
273.00
247.00
247.00
1.49
Total:
154.87

Add C.P & OH @15% on

156.42
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 17.99
Rs 18.00

Item Code: 15.38

Details of Cost for : 10.00 Sqm

DSR-12

Page 623 of 2298

Code
0112
0114
0115
9999

Description
LABOUR
Carpenter 2nd class
Beldar
Coolie
Sundries

Unit

Quantity

Rate

Day
Day
Day
L.S.

0.10
0.40
0.20
4.16

273.00
247.00
247.00
1.49
Total:
181.70

Add water charges @ 1% on

Add C.P & OH @15% on

183.52
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 21.11
Rs 21.10

Item Code: 15.39.1

Dismantling wooden boarding in lining of walls : Upto 10 mm thick.
Code
0112
0114
0115
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
LABOUR
Carpenter 2nd class
Beldar
Coolie
Sundries

Day
Day
Day
L.S.

0.15
0.20
0.20
5.33

Add water charges @ 1% on

Rate
273.00
247.00
247.00
1.49
Total:
147.69

Add C.P & OH @15% on

149.17
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 17.16
Rs 17.15

Item Code: 15.39.2

Dismantling wooden boarding in lining of walls : Above 10 to 25 mm thick.
Code
0112
0114
0115
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
LABOUR
Carpenter 2nd class
Beldar
Coolie
Sundries

Day
Day
Day
L.S.

0.20
0.25
0.25
6.76

Add water charges @ 1% on

Rate
273.00
247.00
247.00
1.49
Total:
188.17

Add C.P & OH @15% on

190.05
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 21.86
Rs 21.85

Item Code: 15.39.3

Dismantling wooden boarding in lining of walls : Above 25 to 40 mm thick.
Code
0112

DSR-12

Description
LABOUR
Carpenter 2nd class

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day

0.20

Rate
273.00

Page 624 of 2298

0114
0115
9999

Beldar
Coolie
Sundries

Day
Day
L.S.

0.30
0.30
13.39

247.00
247.00
1.49
Total:
222.75

Add water charges @ 1% on

Add C.P & OH @15% on

224.98
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 25.87
Rs 25.85

Item Code: 15.40.1

Dismantling precast concrete or stone slabs in walls, partition walls etc.: Thickness upto 40 mm.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
LABOUR
0124
Mason 2nd class
Day
0.20
0114
Beldar
Day
2.00
0115
Coolie
Day
0.50
9999
Sundries
L.S.
13.39

Rate
273.00
247.00
247.00
1.49
Total:
692.05

Add water charges @ 1% on

Add C.P & OH @15% on

698.97
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 80.38
Rs 80.40

Item Code: 15.40.2

Dismantling precast concrete or stone slabs in walls, partition walls etc.: Thickness above 40 mm upto 75 mm.

Code
0124
0114
0115
9999

Description
LABOUR
Mason 2nd class
Beldar
Coolie
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
Day
L.S.

0.30
3.00
0.75
18.85

Add water charges @ 1% on

Rate
273.00
247.00
247.00
1.49
Total:
1036.24

Add C.P & OH @15% on

1046.60
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 120.36
Rs 120.35

Item Code: 15.41

Dismantling cement asbestors, ceiling or partition.
Code
0112
0114
9999

DSR-12

Description
LABOUR
Carpenter 2nd class
Beldar
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
L.S.

0.20
0.30
5.33

Rate
273.00
247.00
1.49

Page 625 of 2298

Add water charges @ 1% on

Total:
136.64

Add C.P & OH @15% on

138.01
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 15.87
Rs 15.85

Item Code: 15.42.1

Dismantling C.I or asbestos rain pipe : 75 to 80 mm dia. pipe.
Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 10.00 m

Unit
Quantity
Day
Day
L.S.

0.36
0.36
0.91

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
179.20

Add C.P & OH @15% on

180.99
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 20.81
Rs 20.80

Item Code: 15.42.2

Dismantling C.I or asbestos rain pipe : 100 mm dia. pipe.
Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 10.00 m

Unit
Quantity
Day
Day
L.S.

0.36
0.38
1.56

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
185.10

Add C.P & OH @15% on

186.95
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 21.50
Rs 21.50

Item Code: 15.42.3

Dismantling C.I or asbestos rain pipe : 150 mm dia. pipe.
Code
0114
0115
9999

Description
LABOUR
Beldar
Coolie
Sundries

Details of Cost for : 10.00 m

Unit
Quantity
Day
Day
L.S.

0.36
0.40
2.08

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
190.82

Add C.P & OH @15% on

192.73
Cost for 10.00 m

DSR-12

Page 626 of 2298

Rate per One Metre:

Rate as per DSR-12:

Rs 22.16
Rs 22.15

Item Code: 15.43.1

Dismantling : Water bound macadam road.
Code

0114
0115
9999

Details of Cost for : 36.00 Sqm

Unit
Quantity

Description

Detail of cost for 36 sqm

Consider a road 6 metres wide and 6 metres
length wise 25 cm average depth = 9.00 cubic metre
LABOUR
For cutting road taking out soling and metalling including
sorting and screening
Beldar
Day
Coolie
Day
Labour for stacking of serviceable material
L.S.

4.80
2.40
89.70

Add water charges @ 1% on

Rate

247.00
247.00
1.49
Total:
1912.05

Add C.P & OH @15% on

1931.17
Cost for 36.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 61.69
Rs 61.70

Item Code: 15.43.2

Code

0114
0115
9999

Details of Cost for : 36.00 Sqm

Unit
Quantity

Description

Detail of cost for 36 sqm

Consider a road 6 metres wide and 6 metres length wise 30
cm average depth = 10.80 cubic metre
LABOUR
For cutting road taking out soling and metalling including
sorting and screening
Beldar
Day
Coolie
Day
Labour for stacking of serviceable material and disposal of L.S.
unserviceable material within

Rate

9.60
4.80
107.64

247.00
247.00
1.49

Add water charges @ 1% on

Total:
3717.18

Add C.P & OH @15% on

3754.35
Cost for 36.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 119.93
Rs 119.95

Item Code: 15.44.1

Dismantling G.I. pipes : (external work). 15 to 40 mm nominal bore.

DSR-12

Code

Description

0114
0115
9999

LABOUR
Trenching and refilling etc
Beldar
Coolie
Dismantling G.I. pipe and stacking etc

Details of Cost for : 10.00 m

Unit
Quantity

Day
Day
L.S.

0.66
0.66
35.88

Rate

247.00
247.00
1.49
Total:

Page 627 of 2298

Add water charges @ 1% on

379.50

Add C.P & OH @15% on

383.30
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 44.08
Rs 44.10

Item Code: 15.44.2

Dismantling G.I. pipes : (external work). above 40 mm nominal bore.
Code

Description

0114
0115
9999

LABOUR
Trenching and refilling etc
Beldar
Coolie
Dismantling G.I. pipe and stacking etc

Details of Cost for : 10.00 m

Unit
Quantity

Day
Day
L.S.

0.66
0.66
71.70

Add water charges @ 1% on

Rate

247.00
247.00
1.49
Total:
432.87

Add C.P & OH @15% on

437.20
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 50.28
Rs 50.30

Item Code: 15.45.1

Dismantling C.I. pipes : Upto 150 mm diameter.

02.008.01

Details of Cost for : 40.26 m

Description
Unit
Quantity
Detail of cost for 40.26 metre or 11 nos joints
Earth work in excavation for dismantling pipes including
refilling of excavated earth
1x40.26x0.55x0.75 m= 16.61cum
Deduct for pipes of average 100 mm dia
=lx40.26x(22/7)/4x(0.018)x(0.018) =0.44cum
=16.17cum
LABOUR
E/W excavation in foundation trenches .. .. All kinds of soil.
Cum
16.17

02.025
0761
0771
0117
0114
9999

Filling available excavated earth (excluding rock) .. ..

Fuel wood
Kerosene oil
Assistant Fitter or 2nd class Fitter
Beldar
Carriage and sundries

Code

Cum
quint
litre
Day
Day
L.S.

16.17
0.46
0.38
0.63
4.50
53.82

Add water charges @ 1% except on [A]+[B] i.e on

Rate

130.78
83.80
450.00
30.00
273.00
247.00
1.49
Total:
1582.08

Add C.P & OH @15% except on [A]+[B] i.e on

1597.90
Cost for 40.26 m
Rate per One Metre:
Rate as per DSR-12:

Rs 131.83
Rs 155.45

Item Code: 15.45.2

Dismantling C.I. pipes : Above 150 mm dia upto 300 mm dia.

DSR-12

Page 628 of 2298

02.008.01

Details of Cost for : 40.26 m

Description
Unit
Quantity
Detail of cost for 40.26 metre or 11 nos joints
Earth work in excavation for dismantling pipes including
refilling of excavated earth
1x40.26x0.65x0.75 m =19.63cum
Deduct for pipes of average 250 mm dia
= lx40.26x(22/7)/4x(0.274)x(0.274)=2.37cum
=17.26cum
LABOUR
E/W excavation in foundation trenches .. .. All kinds of soil.
Cum
17.26

02.025
0761
0771
0117
0114
9999

Filling available excavated earth (excluding rock) .. ..

Fuel wood
Kerosene oil
Assistant Fitter or 2nd class Fitter
Beldar
Carriage

Code

Cum
quint
litre
Day
Day
L.S.

17.26
1.03
1.14
1.30
7.50
80.73

Add water charges @ 1% except on [A]+[B] i.e on

Rate

130.78
83.80
450.00
30.00
273.00
247.00
1.49
Total:
2825.39

Add C.P & OH @15% except on [A]+[B] i.e on

2853.64
Cost for 40.26 m
Rate per One Metre:
Rate as per DSR-12:

Rs 173.51
Rs 198.70

Item Code: 15.45.3

Dismantling C.I. pipes : Above 300 mm diameter.

02.008.01

Details of Cost for : 40.26 m

Description
Unit
Quantity
Detail of cost for 40.26 metre or 11 nos joints
Earth work in excavation for dismantling pipes including
refilling of excavated earth
1x40.26x0.85x0.75 m =25.67cum
Deduct for pipes of average 450 mm dia
=lx40.26x(22/7)/4x(0.48)x(0.48) =7.29cum
= 18.38cum
LABOUR
E/W excavation in foundation trenches .. .. All kinds of soil.
Cum
18.38

02.025
0761
0771
0117
0114
9999

Filling available excavated earth (excluding rock) .. ..

Fuel wood
Kerosene oil
Assistant Fitter or 2nd class Fitter
Beldar
Carriage & Sundries

Code

Cum
quint
litre
Day
Day
L.S.

18.38
1.40
2.27
2.25
11.50
134.55

Add water charges @ 1% except on [A]+[B] i.e on

Rate

130.78
83.80
450.00
30.00
273.00
247.00
1.49
Total:
4353.33

Add C.P & OH @15% except on [A]+[B] i.e on

4396.86
Cost for 40.26 m
Rate per One Metre:
Rate as per DSR-12:

Rs 223.56
Rs 250.40

Item Code: 15.46.1

Dismantling steel cylinder R.C pipes : Upto 600 mm diameter.

DSR-12

Page 629 of 2298

Code

0114
0115
0101
0761
0771
0117
0114
9999

Details of Cost for : 40.26 m

Description
Unit
Quantity
Detail of cost for 40.26 metre or 11 nos joints
Earth work in excavation for dismantling pipes including
refilling of excavated earth
1x40.26x1.30x1.65 m =86.36cum
Deduct for pipes of average 450 mm dia
=1x40.26x(22/7)/4x(0.48)x(0.48) =7.29 cum
= 79.07 cum
LABOUR
Beldar
Day
5.32
Coolie
Day
5.46
Bhisti
Day
0.31
Fuel wood
quint
1.40
Kerosene oil
litre
2.27
Assistant Fitter or 2nd class Fitter
Day
2.25
Beldar
Day
11.50
Carriage and sundries
L.S.
134.55
Add water charges @ 1% on

Rate

247.00
247.00
260.00
450.00
30.00
273.00
247.00
1.49
Total:
7096.59

Add C.P & OH @15% on

7167.56
Cost for 40.26 m
Rate per One Metre:
Rate as per DSR-12:

Rs 204.74
Rs 204.75

Item Code: 15.46.2

Dismantling steel cylinder R.C pipes : Above 600 mm diameter.
Code

0114
0115
0101
0761
0771
0117
0114
9999

Details of Cost for : 40.26 m

Description
Unit
Quantity
Detail of cost for 40.26 metre or 11 nos joints
Earth work in excavation for dismantling pipes including
refilling of excavated earth
lx40.26xl.30xl.65 m =86.36cum
Deduct for pipes of average 900 mm dia
= 1 x40.26x(22/7)/4x( 1.00)x( 1.00) =31.63cum
=54.73 cum
LABOUR
Beldar
Day
15.82
Coolie
Day
16.25
Bhisti
Day
0.93
Fuel wood
quint
3.08
Kerosene oil
litre
5.00
Assistant Fitter or 2nd class Fitter
Day
10.00
Beldar
Day
20.00
Carriage and sundries
L.S.
179.40
Add water charges @ 1% on

Rate

247.00
247.00
260.00
450.00
30.00
273.00
247.00
1.49
Total:
17636.40

Add C.P & OH @15% on

17812.76
Cost for 40.26 m
Rate per One Metre:
Rate as per DSR-12:

Rs 508.81
Rs 508.80

Item Code: 15.47.1

Dismantling asbestos cement pressure pipes : Upto 150 mm diameter.

DSR-12

Page 630 of 2298

Code

0114
0115
0101
0114
0115
9999

Details of Cost for : 10.00 m

Description
Unit
Quantity
Detail of cost for 10 metre or 11 nos joints
Earth work in excavation for dismantling pipes including
refilling of excavated earth
10.00x0.55x0.75 m =4.125cum
Deduct for pipes of average 100 mm dia
=1x10x(22/7)/4x(0.118)x(0.118) =0.109cum
=4.016cum
LABOUR
Beldar
Day
1.16
Coolie
Day
1.19
Bhisti
Day
0.07
Beldar
Day
0.36
Coolie
Day
0.38
Carriage and sundries
L.S.
1.56
Add water charges @ 1% on

Rate

247.00
247.00
260.00
247.00
247.00
1.49
Total:
783.75

Add C.P & OH @15% on

791.59
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 91.03
Rs 91.05

Item Code: 15.47.2

Dismantling asbestos cement pressure pipes : Above 150 mm diameter.
Code

0114
0115
0101
0114
0115
9999

Details of Cost for : 10.00 m

Description
Unit
Quantity
Detail of cost for 10 metre or 11 nos joints
Earth work in excavation for dismantling pipes including
refilling of excavated earth
10.00x0.65x0.75 m =4.88cum
Deduct for pipes of average 250 mm dia
= lxl0x(22/7)/4x(0.274)x(0.274)=0.590cum
=4.29cum
LABOUR
Beldar
Day
1.24
Coolie
Day
1.28
Bhisti
Day
0.07
Beldar
Day
0.36
Coolie
Day
0.88
Carriage and sundries
L.S.
3.77
Add water charges @ 1% on

Rate

247.00
247.00
260.00
247.00
247.00
1.49
Total:
952.54

Add C.P & OH @15% on

962.07
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 110.64
Rs 110.65

Item Code: 15.48

Taking out CI cover with frame from RCC top slab of manholes of various sizes.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Detail of cost for 1 man hole
Demolition of R.C.C. slab

DSR-12

Rate

Page 631 of 2298

0114
0115
9999
9999

1.3x1.2x0.15 m=0.234cum
Less cover 0.61x0.455x0.15 m =0.042cum
=0.192cum
LABOUR
Beldar
Coolie
Removel of C.I. Cover with frame including
stacking
Sundries L.S.

Day
Day
L.S.

0.50
0.14
1.30

247.00
247.00
1.49

L.S.

7.15

1.49
Total:
170.67

Add water charges @ 1% on

Add C.P & OH @15% on

172.38
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 198.24
Rs 198.25

Item Code: 15.49

Taking out CI cover with frame from R.C.C. top slab of inspe- ction chambers.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Detail of cost for 1 man hole
Demolition of R.C.C. slab
1.1x0.9x0.15 m=0.148cum
Less cover 0.61x0.455x0.15 m =0.042cum
=0.106cumSay 0.11 cum
LABOUR
0114
Beldar
Day
0.29
0115
Coolie
Day
0.08
9999
Removel of C.I. Cover with frame including stacking
L.S.
0.65
9999
Sundries
L.S.
5.33
Add water charges @ 1% on

Rate

247.00
247.00
1.49
1.49
Total:
100.30

Add C.P & OH @15% on

101.30
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 116.50
Rs 116.50

Item Code: 15.50

Dismantling of R.C.C spun vent shaft.
Code

0114
0115

DSR-12

Description
Detail of cost for 1 each
Dismantling cement concrete
(a) 1:4:8: 0.90x0.90x1.35m =1.094cum
Less shaft 1/4x22/7x(0.450)x(0.450)x1.10 m
=0.175cum
=0.919cum Say 0.92cum
Dismantling cement concrete
(b)1:2:4 : 90x0.90x0.15m =0.122cum
Less shaft 1/4x22/7x0.15x0.45 m =0.024cum
=0.098cum Say 0. lOcum
LABOUR
Beldar
Coolie

Details of Cost for : 1.00 No.

Unit
Quantity

Day
Day

0.81
0.51

Rate

247.00
247.00

Page 632 of 2298

9999
0114
0115
9999
0130
0123
0124
0100
0114
9999

Sundries
Beldar
Coolie
Sundries
Mistry
Mason 1 st class
Mason 2nd class
Bandhani
Beldar
Sundries for scaffolding etc

L.S.
Day
Day
L.S.
Day
Day
Day
Day
Day
L.S.

1.82
0.16
0.07
0.52
0.25
0.12
0.12
1.00
1.00
53.82

Add water charges @ 1% on

1.49
247.00
247.00
1.49
301.00
301.00
273.00
260.00
247.00
1.49
Total:
1117.65

Add C.P & OH @15% on

1128.83
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1298.15
Rs 1298.15

Item Code: 15.51

Dismantling of road gully chambers of various sizes i/c CI grating with frame.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Detail of cost for one chamber
Dismantling cement concrete
a) 1:5:10 : 1.05x1.00x0.15m=0.16cum
Dismantling brick work in cement mortar
2.70x0.20x0.45m =0.24cum
Dismantling cement concrete
b) 1:2:4: 2.70x0.20x0.15m =0.08cum
LABOUR
0114
Beldar
Day
0.14
0115
Coolie
Day
0.09
9999
Sundries
L.S.
0.26
0114
Beldar
Day
0.25
0115
Coolie
Day
0.22
9999
Sundries
L.S.
0.52
0114
Beldar
Day
0.13
0115
Coolie
Day
0.06
9999
Sundries for scaffolding etc
L.S.
0.39
9999
Dismantling C.I. Grating
L.S.
7.15
Add water charges @ 1% on

Rate

247.00
247.00
1.49
247.00
247.00
1.49
247.00
247.00
1.49
1.49
Total:
232.22

Add C.P & OH @15% on

234.54
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 269.72
Rs 269.70

Item Code: 15.52

Dismantling flushing cistern of any size.
Code
0116
0114
9999

DSR-12

Description
LABOUR
Fitter (grade 1)
Beldar
Sundries

Details of Cost for : 1.00 No.

Unit
Quantity
Day
Day
L.S.

0.25
0.50
17.94

Rate
301.00
247.00
1.49

Page 633 of 2298

Add water charges @ 1% on

Total:
225.48

Add C.P & OH @15% on

227.73
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 261.89
Rs 261.90

Item Code: 15.53.1

Dismantling of C.I sluice valve : upto 150 mm diameter
Details of Cost for : 10.00 Nos
Unit
Quantity

Code

Description

0116
0117
0114
9999

LABOUR:
Fitter (grade 1)
Assistant Fitter or 2nd class Fitter
Beldar
Sundries for removing the RCC cover etc for dismantling sluice
valve

Day
Day
Day
L.S.

Rate

0.60
0.40
1.60
89.70

301.00
273.00
247.00
1.49

Add water charges @ 1% on

Total:
818.65

Add C.P & OH @15% on

826.84
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 95.09
Rs 95.10

Item Code: 15.53.2

Dismantling of C.I. sluice valve : Above 150 mm diameter.
Code

0116
0117
0114
9999

Description
Detail of cost of dismantling 10 sluice valves
(ace.) 100mm
LABOUR
Fitter (grade 1)
Assistant Fitter or 2nd class Fitter
Beldar
Sundries for removing the R.C.C. cover etc for dismantling
sluice valve

Details of Cost for : 10.00 Nos

Unit
Quantity

Day
Day
Day
L.S.

Rate

2.40
1.54
6.40
89.70

301.00
273.00
247.00
1.49

Add water charges @ 1% on

Total:
2857.27

Add C.P & OH @15% on

2885.84
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 331.87
Rs 331.85

Item Code: 15.54

Dismantling of spindle fire hydrant.
Code
0116
0117
0114

DSR-12

Description
LABOUR
Fitter (grade 1)
Assistant Fitter or 2nd class Fitter
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity
Day
Day
Day

1.50
1.00
4.00

Rate
301.00
273.00
247.00

Page 634 of 2298

Add water charges @ 1% on

Total:
1712.50

Add C.P & OH @15% on

1729.63
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 198.91
Rs 198.90

Item Code: 15.55.1

Dismantling of C.C. platform along with curtain walls and base concrete etc : 120 x 120 cm (outside to outside).

Code

0114
0115
9999
0114
0115
9999
0114
0115
9999

Description
Detail of cost for one platform
Dismantling cement concret 1:5:10
4.00x0.35x0.12m =0.168cum
0.80x0.80x0.075m =0.048cum
=0.216cum Say 0.22cum
Dismantling brick work in cement mortar
4.00x0.20x0.30m =0.24cum
4.00x0.10x0.20m =0.088cum
=0.328cum Say 0.33cum
Dismantling 40 mm C.C. flooring 1:2:4
1.00x 1.00x0.04m =0.04cum
LABOUR
Beldar
Coolie
Sundries
Beldar
Coolie
Sundries
Beldar
Coolie
Sundries for scaffolding etc

Details of Cost for : 1.00 No.

Unit
Quantity

Day
Day
L.S.
Day
Day
L.S.
Day
Day
L.S.

0.19
0.12
0.39
0.35
0.30
0.91
0.06
0.03
0.13

Add water charges @ 1% on

Rate

247.00
247.00
1.49
247.00
247.00
1.49
247.00
247.00
1.49
Total:
261.48

Add C.P & OH @15% on

264.09
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 303.70
Rs 303.70

Item Code: 15.55.2

Dismantling of C.C. platform along with curtain walls and base concrete etc : 210 x 120 cm (outside to outside).

Code

DSR-12

Description
Detail of cost for one platform
Dismantling cement concrete 1:5:10
5.80x0.35x0.22m =0.243cum
0.80x1.70x0.075m =0.102cum
=0.345cum Say 0.35cum
Dismantling brick work in cement mortar
5.80x0.20x0.30m =0.348cum
6.20x0.10x0.20m =0.124cum
=0.472cum Say 0.47cum

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

Page 635 of 2298

0114
0115
9999
0114
0115
9999
0114
0115
9999

Dismantling 40 mm C.C. flooring 1:2:4

1.90x 1.00x0.04m =0.08cum
LABOUR
Beldar
Coolie
Sundries
Beldar
Coolie
Sundries
Beldar
Coolie
Sundries for scaffolding etc

Day
Day
L.S.
Day
Day
L.S.
Day
Day
L.S.

0.31
0.19
0.65
0.50
0.42
1.30
0.13
0.06
0.39

Add water charges @ 1% on

247.00
247.00
1.49
247.00
247.00
1.49
247.00
247.00
1.49
Total:
401.16

Add C.P & OH @15% on

405.17
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 465.95
Rs 465.95

Item Code: 15.55.3

Dismantling of cement concrete platform along with curtain walls and base concrete etc. - 320 x 120 cm (outside to outside)

Code

0114
0115
9999
0114
0115
9999
0114
0115
9999

Description
Details of cost for one platform
Details of cost for one platform
Dismantling cement concrete 1:5:10
8.00x0.35x0.12m =0.336cum
2.80x0.80x0.075m =0.168cum
=0.504cum Say 0.50cum
Dismantling brick work in cement mortar
8.00x0.20x0.30m =0.48cum
8.40x0.10x0.20m =0.168cum
=0.648cum Say 0.65cum
Dismantling 40 mm C.C. flooring 1:2:4
3.00x1.00x0.04m =0.12cum
LABOUR:
Beldar
Coolie
Sundries
Beldar
Coolie
Sundries
Beldar
Coolie
Sundries for scaffolding etc.

Details of Cost for : 1.00 No.

Unit
Quantity

Day
Day
L.S.
Day
Day
L.S.
Day
Day
L.S.

0.44
0.28
0.91
0.69
0.59
1.56
0.19
0.09
0.52

Add water charges @ 1% on

Rate

247.00
247.00
1.49
247.00
247.00
1.49
247.00
247.00
1.49
Total:
567.61

Add C.P & OH @15% on

573.29
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 659.28
Rs 659.30

Page 636 of 2298

Item Code: 15.56

Dismantling old plaster or skirting raking out joints.
Code
0114
0115
0101
9999

Description
LABOUR
Beldar
Coolie
Bhisti
Sundries for scaffolding etc

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
Day
L.S.

0.36
0.08
0.07
1.43

Add water charges @ 1% on

Rate
247.00
247.00
260.00
1.49
Total:
129.01

Add C.P & OH @15% on

130.30
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 14.99
Rs 15.00

Item Code: 15.57

Dismantling aluminium/Gypsum partitions etc.
Code
0112
0114
9999

Description
LABOUR
Carpenter 2nd class
Beldar
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
L.S.

0.20
0.30
5.38

Add water charges @ 1% on

Rate
273.00
247.00
1.49
Total:
136.72

Add C.P & OH @15% on

138.09
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 15.88
Rs 15.90

Item Code: 15.58

Demolishing C.C/R.C.C work by mechanical means and stockpiling at designated locations.
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
LABOUR
0128
Mate
Day
0.03
Labour for operating pneumatic tools
0139
Skilled Beldar
Day
0.50
0114
Beldar
Day
0.50
Labour for cutting reinforcement bars.
0103
Blacksmith 2nd class
Day
0.50
0114
Beldar
Day
0.50
MACHINERY
0040
Air compressor 250 cfm with two leads for
day
0.125
preumatic cutters/ hammers.
0039
Tractor trolley .
per d
0.05
0041
Joint cutting machine with 2-3 blades
per d
0.125
Add water charges @ 1% on

Rate
260.00
260.00
247.00
273.00
247.00
1800.00
1350.00
900.00
Total:
926.30

Add C.P & OH @15% on

935.56
Cost for 1.00 Cum

DSR-12

Page 637 of 2298

Rate per One Cum:

Rate as per DSR-12:

Rs 1075.89
Rs 1075.90

Item Code: 15.59

Dismantling of flexible pavement (Bitumenous courses) by mechanical.
Code
0128
0114
0039
0038

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
LABOUR
Mate
Beldar
MACHINERY
Tractor trolley.
Tractor with ripper attachment.

Day
Day
per d
per d

Rate

0.01
0.30

260.00
247.00

0.0475
0.002

1350.00
1350.00
Total:
143.53

Add water charges @ 1% on

Add C.P & OH @15% on

144.97
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 166.72
Rs 166.70

Item Code: 15.60

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading,
transporting, unloading to municipal dumping ground beyond 50 m initial lead, for all leads including all lifts involved.

Code
2264

Details of Cost for : 1.00 Cum

Unit
Quantity
cum
1.00

Description
Carraige of Rubbish

Add water charges @ 1% on

Rate
87.60
Total:
87.60

Add C.P & OH @15% on

88.48
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 101.75
Rs 101.75

Item Code: 16.1

Preparation of sub grade and consolidating with road roller.
Code

0128
0115
0114
0003
0113
1235
9999
9999

DSR-12

Description
(A) preparation of subgrade.
Earth work in excavation including dressing
100sqm.x22.5cm (average depth) = 22.5cum.
LABOUR
Mate
Coolie
Beldar
Hire charges of road roller
Chowkidar
Diesel for road roller @ 18 litres
Carriage of diesel
Sundries
(B) Conslidation of subgrade

Details of Cost for : 100.00 Sqm

Unit
Quantity

Rate

etc.

Day
Day
Day
Day
Day
litre
L.S.
L.S.

1.80
18.00
0.27
0.054
0.054
0.972
1.43
6.76

260.00
247.00
247.00
1500.00
247.00
41.29
1.49
1.49

Page 638 of 2298

Roller charges (one roller does 1860 sqm. of conosolidation of

sub - grade with road roller of 8 to 12 tonne capacity including
making good the undulations etc. with earth or quarry spoils
etc. and rerolling the subgrade
0003
0113
1235
9999
9999

Hire charges of Diesel Road Roller - 8 to 10 tonne

Chowkidar
Diesel oil
Carriage of diesel.
Sundries

Day
Day
litre
L.S.
L.S.

0.054
0.054
0.972
1.43
6.76

Add water charges @ 1% on

1500.00
247.00
41.29
1.49
1.49
Total:
5274.03

Add C.P & OH @15% on

5326.77
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 61.26
Rs 61.25

Item Code: 16.2

Extra for compaction of earth work in embankment under opti- mum moisture conditions.
Details of Cost for : 10.00 Cum
Code
Description
Unit
Quantity
LABOUR
(Extra to item No.2.3 in Earth work)
0101
Bhishti
Day
0.17
Roller charges (one roller does 1860sqm. of consolidation per
day of 8 hours and uses 18 litres diesel)
0003
0113
1235
9999
9999

Hire charges of road roller

Chowkidar
Carriage of diesel
Sundries

Day
Day
litre
L.S.
L.S.

0.008
0.008
0.144
0.39
1.43

Add water charges @ 1% on

Rate

260.00

1500.00
247.00
41.29
1.49
1.49
Total:
66.84

Add C.P & OH @15% on

67.51
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 7.76
Rs 7.75

Item Code: 16.3.1

Supplying & stacking at site: 90mm to 45mm size stone aggregate.
Code
2901
2902
0291
2206

Description
MATERIALS:
Stone Aggregate 125 mm (one size)
Stone Aggregate 90 mm (one size)
Stone Aggregate 63 mm (one size)
Carriage

Details of Cost for : 1.00 Cum

Unit
Quantity
cum
cum
cum
cum

0.10
0.65
0.25
1.00

Add water charges @ 1% on

Rate
750.00
750.00
850.00
95.22
Total:
870.22

Add C.P & OH @15% on

878.92
Cost for 1.00 Cum

DSR-12

Page 639 of 2298

Rate per One Cum:

Rate as per DSR-12:

Rs 1010.76
Rs 1010.75

Item Code: 16.3.2

Supplying & stacking at site: 63mm to 45mm size stone aggregate.
Code
2902
0291
0292
2206

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS :
Stone Aggregate 90 mm (one size).
Stone Aggregate 63 mm (one size)
Stone Aggregate 53 mm (one size)
Carriage of aggregate

cum
cum
cum
cum

0.10
0.65
0.25
1.00

Add water charges @ 1% on

Rate
750.00
850.00
900.00
95.22
Total:
947.72

Add C.P & OH @15% on

957.20
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 1100.78
Rs 1100.80

Item Code: 16.3.3

Supplying & stacking at site: 53mm to 22.4mm size stone aggregate.
Code
0291
0292
0293
2206

Description
MATERIALS :
Stone Aggregate 63mm (one size)
Stone Aggregate 53 mm (one size)
Stone Aggregate 45mm (one size)
Carriage

Details of Cost for : 1.00 Cum

Unit
Quantity
cum
cum
cum
cum

0.05
0.30
0.65
1.00

Add water charges @ 1% on

Rate
850.00
900.00
950.00
95.22
Total:
1025.22

Add C.P & OH @15% on

1035.47
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 1190.79
Rs 1190.80

Item Code: 16.3.4

Supplying & stacking at site: Over burnt (Jhama) brick agg. 120 mm to 40 mm.
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS :
2908
Brick aggregate 120 mm to 40 mm size
cum
1.00
2260
Carriage
cum
1.00
Add water charges @ 1% on

Rate
330.00
95.22
Total:
425.22

Add C.P & OH @15% on

429.47
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 493.89
Rs 493.90

Item Code: 16.3.5

DSR-12

Page 640 of 2298

Supplying & stacking at site: Over burnt (Jhama) brick agg. 90 mm to 45 mm.
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS :
2909
Brick aggregate 90mm to 45mm
cum
1.00
2260
Carriage
cum
1.00
Add water charges @ 1% on

Rate
360.00
95.22
Total:
455.22

Add C.P & OH @15% on

459.77
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 528.74
Rs 528.75

Item Code: 16.3.6

Supplying & stacking at site: Stone screening 13.2 mm nominal size (Type A).
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIAL
2910
Stone chippings 13.2mm
cum
0.05
2911
Stone chippings 10mm/11.2mm
cum
0.80
2903
Stone chippings 5.6mm
cum
0.15
2202
Carriage
cum
1.00
Add water charges @ 1% on

Rate
1050.00
1050.00
1150.00
87.60
Total:
1152.60

Add C.P & OH @15% on

1164.13
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 1338.75
Rs 1338.75

Item Code: 16.3.7

Supplying & stacking at site: Stone screening 11.2 mm nominal size (Type B).
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIAL
2911
Stone chippings 11.2mm
cum
0.10
2903
Stone chippings 5.6mm
cum
0.75
2904
Stone screenings 180 mircorn
cum
0.15
2202
Carriage of stone aggregate 11.2mm & 5.6mm
cum
0.85
2267
Carriage of stone screenings 180 mircron
cum
0.15
Add water charges @ 1% on

Rate
1050.00
1150.00
1150.00
87.60
87.60
Total:
1227.60

Add C.P & OH @15% on

1239.88
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 1425.86
Rs 1425.85

Item Code: 16.3.8

Supplying & stacking at site: Red bajri.
Code

Description

Details of Cost for : 1.00 Cum

Unit
Quantity

Rate

MATERIAL

DSR-12

Page 641 of 2298

0304
2311

Cost of bajri at quarry

Carriage

cum
cum

1.00
1.00

Add water charges @ 1% on

900.00
87.60
Total:
987.60

Add C.P & OH @15% on

997.48
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 1147.10
Rs 1147.10

Item Code: 16.3.9

Code

Description

0114
0115
0979
2241

Excavation:
Beldar
Coolie
Royalty for good earth
Carriage of good earth by mechanical

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day
cum
cum

0.177
0.167
1.00
1.00

Add water charges @ 1% on

Rate
247.00
247.00
30.00
109.50
Total:
224.47

Add C.P & OH @15% on

226.71
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 260.72
Rs 260.70

Item Code: 16.3.10

Supplying and stacking at site. Moorum.
Code
0810
2265

Description
MATERIALS:
Moorum
Carraige of Moorum

Details of Cost for : 1.00 Cum

Unit
Quantity
cum
cum

1.00
1.00

Add water charges @ 1% on

Rate
450.00
87.60
Total:
537.60

Add C.P & OH @15% on

542.98
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 624.43
Rs 624.45

Item Code: 16.4

Laying sprading and compacting stone aggregate of specified sizes to water bound macadam specifications i/c spreading in uniform
thickness, rolling road roller 8 - 10 tonne.
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
LABOUR
0114
Beldar
Day
0.26
247.00
0115
Coolie
Day
0.26
247.00
0101
Bhisti
Day
0.26
260.00
Roller charges (one roller does 30 cum consolidation per day
of 8 hours and uses 18 litres of diesel oil).
0003
Hire charges of Road Roller
Day
0.033
1500.00
0113
Chowkidar
Day
0.033
247.00

DSR-12

Page 642 of 2298

1235
9999
9999

Diesel for road roller @ 18 litres 0.033x18 = 0.59

Diesel oil
Carriage of diesel
Sundries

litre
L.S.
L.S.

0.59
1.43
2.73

Add water charges @ 1% on

41.29
1.49
1.49
Total:
284.25

Add C.P & OH @15% on

287.09
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 330.15
Rs 330.15

Item Code: 16.5.1

Laying water bound macadam sub -base with brick agg. and bli- nding material : Over burnt (Jhama) brick agg. 120 mm to 40 mm.

Code
0114
0115
0101

0003
0113
1235
9999
9999

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
LABOUR
Beldar
Coolie
Bhishti
Roller charges (one roller does 230cum. consolidation per day
of 8 hours and uses 18 litres of diesel oil)
Hire charges of road roller
Chowkidar
Diesel for road roller @ 18 litres per day 18x0.004=0.072
Carriage of diesel
Sundries

Rate

Day
Day
Day

0.35
0.26
0.18

247.00
247.00
260.00

Day
Day
litre
L.S.
L.S.

0.004
0.004
0.072
0.39
2.73

1500.00
247.00
41.29
1.49
1.49
Total:
212.08

Add water charges @ 1% on

Add C.P & OH @15% on

214.20
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 246.33
Rs 246.35

Item Code: 16.5.2

Laying water bound macadam sub -base with brick agg. and bli- nding material : Over burnt (Jhama) brick agg. 90 mm to 45 mm.

Code
0114
0115
0101

0003
0113
1235
9999
9999

DSR-12

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
LABOUR
Beldar
Coolie
Bhishti
Roller charges (one roller does 230cum. consolidation per day
of 8 hours and uses 18 litres of diesel oil)
Hire charges of road roller
Chowkidar
Diesel for road roller @ 18 litres per day 18x0.004=0.072
Carriage of diesel
Sundries

Rate

Day
Day
Day

0.35
0.26
0.18

247.00
247.00
260.00

Day
Day
litre
L.S.
L.S.

0.004
0.004
0.072
0.39
2.73

Add water charges @ 1% on

1500.00
247.00
41.29
1.49
1.49
Total:
212.08

Add C.P & OH @15% on

214.20

Page 643 of 2298

Cost for 1.00 Cum

Rate per One Cum:
Rate as per DSR-12:

Rs 246.33
Rs 246.35

Item Code: 16.6.1

Spreading 6 mm thick red bajri watering and rolling complete: With road roller/ hand roller.
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 6 mm thick and 100.00 sqm area = 0.60
cum.
(A) Supplying and stacking of Red bajri at site.
MATERIAL:
0304
Red Bajri
cum
0.60
900.00
2311
Carriage of Red bajri
cum
0.60
87.60
(B) Spreading of red bajri
LABOUR
0114
Beldar
Day
0.54
247.00
0101
Bhishti
Day
0.54
260.00
Roller charges (one roller does 1860sqm. consolidation per
day of 8 hours and uses 18 litres of diesel oil)
0003
Hire charges of road roller
Day
0.054
1500.00
0113
Chowkidar
Day
0.054
247.00
1235
Diesel for road roller @ 18 litres per day i.e. litre
18x0.054=0.972
litre
0.972
41.29
9999
Carriage of diesel
L.S.
1.43
1.49
Total:
Add water charges @ 1% on
1002.94
Add C.P & OH @15% on
1012.97
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 11.65
Rs 11.65

Item Code: 16.7.1

Brick edging in full brick width and half brick depth : With F.P.S. bricks of class designation 75.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIAL
2602
Common burnt clay F.P.S (non modular) Bricks of class 1000
160.00
designation 7.5
2201
Carriage of Bricks
1000
160.00
0123
Mason 1st class
Day
0.17
0124
Mason 2nd class
Day
0.17
0115
Coolie
Day
0.35
9999
Removal of rubbish
L.S.
17.94
9999
Sundries
L.S.
8.97
Add water charges @ 1% on

Rate
2900.00
233.60
301.00
273.00
247.00
1.49
1.49
Total:
725.51

Add C.P & OH @15% on

732.77
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 84.27
Rs 84.25

Page 644 of 2298

Item Code: 16.8.1

Brick edging laid lengthwise with half brick depth : With F.P.S. bricks of class designation 75.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIAL
2602
Common burnt clay F.P.S (non modular) Bricks of class 1000
49.00
designation 7.5
2201
Carriage of Bricks
1000
49.00
Labour
0123
Mason 1st class
Day
0.04
0124
Mason 2nd class
Day
0.04
0115
Coolie
Day
0.09
9999
Removal of rubbish
L.S.
4.16
Add water charges @ 1% on

Rate
2900.00
233.60
301.00
273.00
247.00
1.49
Total:
204.94

Add C.P & OH @15% on

206.99
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 23.80
Rs 23.80

Item Code: 16.9

Scarifying metalled (water- bound) road surface.
Code
0114
0115

0003
0113
1235
9999
9999

Details of Cost for : 100.00 Sqm

Unit
Quantity

Description
LABOUR
Beldar
Coolie
Consolidation of scarified material
100sqm.x50mm = 5cum
Less 20% wastage = 1 cum.
= 4 cum.
Hire charges of road roller
Chowkidar
Diesel for road roller @ 18 litres/ day(8 hour)
Carriage
Sundries

Rate

Day
Day

1.35
1.08

247.00
247.00

Day
Day
litre
L.S.
L.S.

0.132
0.132
2.376
1.43
5.46

1500.00
247.00
41.29
1.49
1.49
Total:
939.19

Add water charges @ 1% on

Add C.P & OH @15% on

948.58
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 10.91
Rs 10.90

Item Code: 16.10

Making bajri path including preparation of subgrade, S/L brick aggregate.
Code

02.006.01

DSR-12

Details of Cost for : 100.00 Sqm

Description
Unit
Quantity
Earth work in excavation including dressing etc.
100x0.075=7.5cum.
E/W in excavation over areas (exceeding 30cm in depth. 1.5m
7.50
in width 10sqm on plan) - All
Collection and stacking of brick aggregate
53 mm nominal size 100x0.075 =7.50cum.
Brick Aggregate

Rate

129.35

Page 645 of 2298

0286
2260

16.003.08

16.003.10

0114
0115
0101
0003
0113
1235
9999
9999
0003
0113
1235
9999

53 mm nominal size 100x0.75=7.50cum.

cum
Carriage
cum
Supply staking Red Bajri
100x0.012= 1.2 cum.
Supplying & stacking at site: Red bajri.
Collection and stacking of moorum at site
100x0.012= 1.20cum.
Supplying and stacking at site. Moorum.
Spreading and consolidation of brick aggregate and blinding
material etc.
Beldar
Day
Coolie
Day
Bhishti
Day
Hire charges of road roller
Day
Chowkidar
Day
Diesel for road roller @ 18 litres/ day(8 hour)
litre
Carriage of diesel
L.S.
Sundries
L.S.
Spreading of red bajri, watering and rolling
Roller charges
Day
Chowkidar
Day
Diesel for road roller
litre
Carriage of diesel
L.S.

7.50
7.50

490.00
95.22

1.20

1147.10

1.20

624.43

1.95
2.63
1.35
0.135
0.135
2.43
10.79
20.15

247.00
247.00
260.00
1500.00
247.00
41.29
1.49
1.49

0.054
0.054
0.972
0.55

1500.00
247.00
41.29
1.49
Total:
6388.98

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

6452.87
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 105.17
Rs 105.20

Item Code: 16.11

Dry stone pitching 22.5 Cm thick including supply of stones.
Code

1158
2216
0123
0124
0114
0115
9999

Description
MATERIAL
Stone for pitching 15 cm x
22.5 crn thick
Carriage 2.25x2245/1000 = 5.05 t
LABOUR
Mason 1 st class
Mason 2nd class
Beldar
Coolie
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

cum
tonne

2.25
5.05

420.00
77.87

Day
Day
Day
Day
L.S.

1.08
1.08
2.15
1.61
6.76

301.00
273.00
247.00
247.00
1.49
Total:
2896.95

Add water charges @ 1% on

Add C.P & OH @15% on

2925.92
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 336.48
Rs 336.50

Item Code: 16.12.1

Dry brick pitching half brick thick in drains, road path including suplly of bricks : with FPS bricks with class designation 75.

DSR-12

Page 646 of 2298

Code
2602
2201
0123
0124
0114

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description

MATERIAL
Common burnt clay F.P.S (non modular) Bricks of class 1000
designation 7.5
Carriage for bricks
1000
LABOUR
Mason 1st class
Day
Mason 2nd class
Day
Beldar
Day

Rate

645.00

2900.00

645.00

233.60

0.40
0.40
1.08

301.00
273.00
247.00
Total:
2517.53

Add water charges @ 1% on

Add C.P & OH @15% on

2542.71
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 292.41
Rs 292.40

Item Code: 16.13.1

Cutting road and making good the same : Bituminous portion.
Code

16.003.03
16.003.08
16.003.10
2911
2202
0309
2211

0114
0115
0114
0115

0114
0115
0101

0114
0115
9999

DSR-12

Description
Details of cost for 1.08cum. (road 6 metres wide, 0.6 metre
length wise and 0.30m
(average depth) volume = 1.08 cum).
MATERIAL
Supplying and stacking stone aggregate 53mm to 24mm
nominal size at site.
Supplying & stacking at site: 53mm to 22.4mm size stone
aggregate.
Supplying & stacking at site: Red bajri.
(Rate as per item No. 16.3.8)
Supplying and stacking at site. Moorum.
(Rate as per item No. 16.3.10)
Stone chipping 11.2mm size
Carriage of aggregate
Paving bitumen S-90 of approved quality
Carriage
LABOUR
For cutting road and taking out soling and metalling including
sorting and screening.
Beldar
Coolie
Relaying soling stone 3.6x0.15=0.54cum.
Beldar
Coolie
Relaying road metal with extra quantity and consolidation to
0.10m, thickness
3.6x0.10=0.36cum.
Beldar
Coolie
Bhishti
Painting two coats, 3.6sqm. including labour for spreading grit
Beldar
Coolie
Barrier, chowkidar, sprayman, mate, etc.

Details of Cost for : 1.08 Cum

Unit
Quantity

Rate

0.09

1190.79

0.023

1147.10

0.022

624.43

0.092
0.092
0.011
0.011

1050.00
87.60
37000.00
87.60

Day
Day

0.96
0.48

247.00
247.00

Day
Day

0.24
0.24

247.00
247.00

Day
Day
Day

0.71
0.48
0.10

247.00
247.00
260.00

Day
Day
L.S.

0.48
0.48
40.43

247.00
247.00
1.49
Total:

cum
cum
tonne
tonne

Page 647 of 2298

Add water charges @ 1% except on [A]+[B]+[C] i.e on

1604.15

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

1620.19
Cost for 1.08 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 1861.58
Rs 1861.60

Item Code: 16.13.2

Cutting road and making good the same : Water bound macadam.
Code

16.003.03

16.003.08
16.003.10

0114
0115
0114
0115

0114
0115
0101
9999

Description
Consider a road 6 metres wide and 0.6m. lengthwise and
0.25m cm average depth
=0.90cum.
MATERIAL
Supplying and stacking stone aggregate 53mm to 22 mm
nominal size at site.
Supplying & stacking at site: 53mm to 22.4mm size stone
aggregate.
Supplying and stacking red bajri at site
Supplying & stacking at site: Red bajri.
Supplying and stacking moorum at site.
Supplying and stacking at site. Moorum.
LABOUR
For cutting road and taking out soling and metalling including
sorting and screening.
Beldar
Coolie
For relaying soling stone 3.6x0.15=0.54cum.
Beldar
Coolie
For relaying road metal with extra quantity and consolidation
to 0.10m thickness 3.6x0.10=0.36cum.
Beldar
Coolie
Bhishti
Barrier and chowkidar etc.

Details of Cost for : 0.90 Cum

Unit
Quantity

Rate

0.09

1190.79

0.023

1147.10

0.022

624.43

Day
Day

0.48
0.24

247.00
247.00

Day
Day

0.24
0.24

247.00
247.00

Day
Day
Day
L.S.

0.48
0.48
0.10
53.82

247.00
247.00
260.00
1.49
Total:
639.71

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

646.11
Cost for 0.90 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 989.24
Rs 989.25

Item Code: 16.14

Cutting bajri paths and making good the same.
Code

0286
2260

DSR-12

Description

Details of Cost for : 10.00 Sqm

Unit
Quantity

10x0.075=0.75cum.
MATERIAL
Supplying and stacking 50mm brick aggregate at site(extra cum
quantity)
Carriage
cum
Supplying and stacking red bajri at site

Rate

0.19

490.00

0.19

95.22

Page 648 of 2298

16.003.08
16.003.10

0114
0115

Supplying & stacking at site: Red bajri.

Supplying and stacking moorum at site
Supplying and stacking at site. Moorum.
LABOUR
For cutting, sorting out, spreading and consolidation of
aggregate
Beldar
Day
Coolie
Day

0.06

1147.10

0.06

624.43

1.60
0.80

247.00
247.00
Total:
703.99

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

711.03
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 92.40
Rs 92.40

Item Code: 16.15.1

Supplying at site : RCC Standards post/ Struts/ rails/pales of mix 1: 1.5:3 with wooden plugs or 6 mm bar nibs wherever required.

Code

04.001.02

0114
0101
0123
0124
0128

05.022.02

DSR-12

Description
Details of cost for 10 posts = 0.336cum
Cubical contents of one post
Area bottom A1 =(15+12.5)/2 x8.75+x3.14
x(6.25)
=120.31+61.38=181.69sqm.
Area bottom A2 = (10+7.5)/2 x6.25+x3.14
x(3.75) sqm
= 54.68+22.08 = 76.76 sqm.
(A1 A2 ) = 118.10sqm
A1+A2+ SQRT(A1.A2)= 0.03766 sqm
Volume = (1.05)/3x0.03766 = 0.01316 cum
=0.0132cum.
Volume of lower and square portion
(16.5x16.5x75)/100x100x100 = 0.0204cum.
Total volume = 0.0132+0.0204 cum
= 0.0336 cum. Qty. for 10 post
= 0.0336x10
= 0.336cum.
Cement concrete 1:1.5:3 (1 Cement: 1.5 Coarse sand : 3
graded stone aggregate 12.5mm nominal size)
P/L CC excluding centering - All work up to plinth level: 1:1:3
- Coarse sand, 20mmstone
Extra labour for laying cement concrete in
RCC work
Beldar
Bhishti
Mason 1 st class
Mason 2nd class
Mate
M.S. Reinforcement
6mm dia. bars
10x4xl.88m = 75.20m+
10x9x0.50m=45.00m =
120.20m 120.2)[email protected]/m =26.44kg.
Reinforcement for RCC work :- Upto plinth level - Hard drawn
steel wire.
Centering and shuttering

Details of Cost for : 0.336 Cum

Unit
Quantity

Day
Day
Day
Day
Day

Rate

0.336

4904.97

0.034
0.067
0.013
0.013
0.013

247.00
260.00
301.00
273.00
260.00

26.44

58.15

Page 649 of 2298

05.009.01

0367
2209
0983
2261
0114
0101
0155
0115
0101
9999
9999
9999
9999
9999
9999

Centering & shuttering including strutting, propping etc. Foundations, footings, bases o
6mm C.Plaster 1:2 (1 Cement: 2 fine sand)
Details of cost for 9.88 sqm.
(0.072)/l 0x9.88 = 0.071
Cement
Carriage
Fine sand
Carriage
Beldar
Bhishti
Mason
Coolie
Bhishti
Hire and running charges of mixer
Extra for removing burr, cleaning with wire brushes, pock
making with pointed tool etc. co
Scaffolding and sundries
Carriage of RCC posts
Wooden plugs or 6 mm bar nibs
Sundries

6.99

166.88

tonne
tonne
cum
cum
Day
Day
Day
Day
Day
L.S.
L.S.

0.05
0.05
0.07
0.07
0.05
0.02
0.64
0.80
0.27
1.95
13.26

5000.00
77.87
640.00
87.60
247.00
260.00
287.00
247.00
260.00
1.49
1.49

L.S.
L.S.
L.S.
L.S.

11.57
53.82
12.22
13.52

1.49
1.49
1.49
1.49
Total:
968.96

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

978.65
Cost for 0.336 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 16302.08
Rs 16302.45

Item Code: 16.15.2

Supplying at site : Welded steel wire fabrick of required width rectangular mesh.
Details of Cost for : 209.25 Kg
Code
Description
Unit
Quantity
Details of cost for 27 sqm.
MATERIAL
1021
Steel wire fabric 0.9m wide rectangular mesh 75x25mm size sqm
27.00
weight not less than 7.75kg/s
2314
Carriage of wire
tonne
0.209
7.75x27=209.25kg=0.209tonne
Add water charges @ 1% on

Rate

430.00
77.67
Total:
11626.23

Add C.P & OH @15% on

11742.49
Cost for 209.25 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 64.53
Rs 64.55

Item Code: 16.16

S/F turn buckles and straining bolts for barbed wire fencing.
Code
1030
1028
9999

DSR-12

Description
MATERIAL
Turn buckles
Straining bolts
Carriage of turn buckles and straining bolts
Labour for fixing straining bolts and turn buckles

Details of Cost for : 1.00 sets

Unit
Quantity
each
each
L.S.

1.00
1.00
2.73

Rate
15.00
70.00
1.49

Page 650 of 2298

0103

Blacksmith 2nd class

Day

0.10

Add water charges @ 1% on

273.00
Total:
116.37

Add C.P & OH @15% on

117.53
Cost for 1.00 sets
Rate per Each Set:
Rate as per DSR-12:

Rs 135.16
Rs 135.15

Item Code: 16.17.1

Fencing with RCC post placed at required distance,embedded in CC blocks, provided with horizontal lines &2 diagonals of barbed
wire. With G.I. barbed wire.
Details of Cost for : 333.00 m
Code
Description
Unit
Quantity
Rate
Details of cost for 30m
MATERIAL
G.I. barbed wire
30x9 = 270m+
10x6.32 = 63m.
= 333.00m.
1029
333m @9.38kg/100m =31.24kg = 0.31q
quint
0.31
5175.00
2314
Carriage
tonne
0.03
77.67
9999
G.I. staples or binding wire
L.S.
49.40
1.49
Labour for fixing costs in line, fixing and stretching wire
0123
Mason 1st class
Day
0.12
301.00
0124
Mason 2nd class
Day
0.12
273.00
0114
Beldar
Day
0.50
247.00
0102
Blacksmith 1st class
Day
0.50
301.00
0103
Blacksmith 2nd class
Day
0.50
273.00
9999
Sundries
L.S.
13.52
1.49
Total:
Add water charges @ 1% on
2179.71
Add C.P & OH @15% on
2201.51
Cost for 333.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 7.60
Rs 7.60

Item Code: 16.18.1

1.2 M high fencing with 1.8 M sal balli posts, 30 Cm girth (min) placed every 2.50 Mtr apart provided with 6 horizo- ntal lines and
two diagonals of barbed wire(cost of posts, struts, earth work & concrete to be paid for separately) : With G.I. barbed wi

Code

1029
2314

DSR-12

Description
Details of cost for 30m
MATERIAL:
G.I. barbed wire
30x9 = 270.00m
2xl0x( 12+32) 1/2 = 63.24 m.
= 333.24m
333.24m @9.38kg/l00m
=31.26 kg say 0.31 qtl
Carriage of barbed wire supplying & Fixing.
Turn buckle & staple

Details of Cost for : 333.24 m

Unit
Quantity

quint
tonne

0.31
0.031

Rate

5175.00
77.67

Page 651 of 2298

16.016

S/F turn buckles and straining bolts for barbed wire fencing.

9999

G.I. staples
Labour for fixing posts in line and fixing and stretching wire:

0123
0124
0114
0102
0103

Mason 1st class

Mason 2nd class
Beldar
Blacksmith 1st class
Blacksmith 2nd class

10.00

135.16

L.S.

49.40

1.49

Day
Day
Day
Day
Day

0.12
0.12
0.50
0.50
0.50

301.00
273.00
247.00
301.00
273.00
Total:
2159.65

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

2181.25
Cost for 333.24 m
Rate per One Metre:
Rate as per DSR-12:

Rs 11.58
Rs 11.60

Item Code: 16.19

Supplying at site and fixing Angle iron post for fencing work .
Code

1007
2205
0103
0114
0103
0114
9999

Description
MATERIAL:
M.S. angle = 1.00 qtl.
Add 5% wastage = 0.05 qtl.
=1.05 qtl.
Carriage of angle iron
LABOUR
Blacksmith 2nd class
Beldar
For spotting, bending of angle and drilling holes etc. :
Blacksmith 2nd class
Beldar
Sundries such as drilling bit etc.

Details of Cost for : 100.00 Kg

Unit
Quantity

quint
tonne

Rate

1.05
0.105

4250.00
77.87

Day
Day

0.75
0.50

273.00
247.00

Day
Day
L.S.

1.00
1.00
19.76

273.00
247.00
1.49
Total:
5348.37

Add water charges @ 1% on

Add C.P & OH @15% on

5401.85
Cost for 100.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 62.12
Rs 62.10

Item Code: 16.20

Welded steel wire fabric fencing with posts of speci- fied material and of standard design.(cost of posts, welded steel wire fabric,
painting, earth work in excavation and C.C. to be paid separately).

Code

0123
0124
0114
0102
0103

DSR-12

Details of Cost for : 36.00 Sqm

Description
Unit
Quantity
Details of csot for 30metres i.e.30xl.20=36.00sqm
Labour for fixing posts in line fixing and stretching - welded
wire fabric :
Mason 1st class
Day
0.12
Mason 2nd class
Day
0.12
Beldar
Day
0.50
Blacksmith 1 st class
Day
0.50
Blacksmith 2nd class
Day
0.50

Rate

301.00
273.00
247.00
301.00
273.00

Page 652 of 2298

9999
9999

G.I. staple or binding wire

Sundries

L.S.
L.S.

53.82
53.82

Add water charges @ 1% on

1.49
1.49
Total:
639.76

Add C.P & OH @15% on

646.16
Cost for 36.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 20.64
Rs 20.65

Item Code: 16.21

Code

0126
9999

Description
Details of cost for 6 letters 8 cm height
LABOUR FOR ENGRAVING STONEMason (Ornamental work)
Sundries

Details of Cost for : 48.00 units

Unit
Quantity

Day
L.S.

0.38
6.76

Add water charges @ 1% on

Rate

301.00
1.49
Total:
124.45

Add C.P & OH @15% on

125.69
Cost for 48.00 units
Rate per Units:
Rate as per DSR-12:

Rs 3.01
Rs 3.00

Item Code: 16.22

P/F 15 x 15 x 90 Cm boundary stone of hard stone with top 30 Cm chisel dressed.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost for one stone
1151
Cost of stone 15x15x90cm with 30cm chisel dress
each
1.00
LABOUR FOR FIXING
0114
Beldar
Day
0.12
9999
Carriage to site
L.S.
4.16
Add water charges @ 1% on

Rate
60.00
247.00
1.49
Total:
95.84

Add C.P & OH @15% on

96.80
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 111.32
Rs 111.30

Item Code: 16.23

P/F 15 cm dia at top, 20 cm at bottom and 90 cm high precast RCC 1 : 2 : 4 boundary stone.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost for one stone
(i) Cement concrete 1.1.5:3 (l cement :1.5 course sand :3
graded stone aggregate 20mm nominal size)
L/3 *A1+A2 sqrt(A1A2) = 0.825/3 x (0.09522 +
0.0752 + 0.75x0.095)x3.142 =0.0186 (A)
Semi Circlel/2x4/ 3x22/7x(0.075)3=0.0010 (B)/ 0.0196
(A+B) Say 0.02cum.

DSR-12

Rate

Page 653 of 2298

04.001.02

0114
0101
0123
0124
0128

05.022.01

05.009.01

0367
2209
0983
2261
0114
0101
9999
9999
0155
0115
0101
9999
9999
0114
9999

P/L CC excluding centering - All work up to plinth level: 1:1:3

- Coarse sand, 20mmstone
(ii) Extra for laying cement concerte in RCC work
Beldar
Bhishti
Mason 1st class
Mason 2nd class
Mate
(iii) M.S. reinforcement6mm dia. bar
5.99 metre =5.99x0.22 =1.32kg.
Reinforcement for R.C.C. work all complete. -Upto plinth level
Mild steel and Medium Tensi
(iv) Centering and shuttering
1/2x3.142 (0.19+0.15)x0.825 =0.441 +
3.142/4(0.19) =0028
1/2x4x3.142(0.075) = 0.035
= 0.504
Say0.50sqm.
Centering & shuttering including strutting, propping etc. Foundations, footings, bases o
(v) 6mm cement plaster 1:3 (1 Cement :3 fine sand)1/2x3.142 (0.19+0.15)x0.825 =0.44 +
3.14/4 (0.19) =0.028
1/2x4x3.142(0.075) = 0.035
= 0.504
Say 0.50sqm.
Cement
Carriage of cement
Fine sand
Carriage of fine sand
Labour for mortar
Beldar
Bhishti
Hire and running charges of mixer
Sundries
Labour for plaster
Mason
Coolie
Bhishti
Extra for removing burr
Scaffolding, sundries etc.
(vi) Labour for fixing
Beldar
Carriage to site

0.02

4904.97

0.002
0.004
0.0008
0.0008
0.0008

247.00
260.00
301.00
273.00
260.00

1.32

56.77

0.50

166.88

tonne
tonne
cum
cum

0.0018
0.0018
0.0385
0.0385

5000.00
77.87
640.00
87.60

Day
Day
L.S.
L.S.

0.0027
0.0002
0.10
0.05

247.00
260.00
1.49
1.49

Day
Day
Day
L.S.
L.S.

0.026
0.038
0.046
0.68
0.60

287.00
247.00
260.00
1.49
1.49

Day
L.S.

0.12
4.16

247.00
1.49
Total:
106.84

Day
Day
Day
Day
Day

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

107.91
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 380.58
Rs 380.55

Item Code: 16.24.1

P/F precast reinforced cement concrete 1 : 1.5 : 3 Km. stone as per standard design i/c. finishing smooth in 1 : 3. 35 x 111 x 25 cm
size.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate

DSR-12

Page 654 of 2298

04.001.02

0114
0101
0123
0124
0128

05.022.01

05.009.01

0367
2209
0983
2261
0114
0101
9999
9999
0155
0115
0101
9999
9999
0114
9999

DSR-12

Details of cost for one stone

(i) Cement concrete 1:1.5:3 (1 cement :1.5 Coarse sand :3
graded stone aggregate 20mm nominal size) in Kilometre
stone
0.35x0.25x0.835m = 0.073
0.37x0.27x0.10m = 0.010
1/2x22/7x(0.175) x0.25m = 0.012
Total = 0.095cum
Say 0.10 cum
P/L CC excluding centering - All work up to plinth level: 1:1:3
- Coarse sand, 20mmstone
(ii) Extra for laying cement concrete in RCC work
Beldar
Bhishti
Mason 1 st class
Mason 2nd class
Mate
(iii) M.S. reinforcement0.10cum @48.06kg/cum. =4.806kg.
Say 4.81kg.
Reinforcement for R.C.C. work all complete. -Upto plinth level
Mild steel and Medium Tensi
(iv) Centering and shuttering(0.35+2x0.25)x0.835 = 0.710 sqm
0.35x0.25 = 0.088sqm
(0.37+2x0.27)x0.10 = 0.091sqm
2x0.37x0.01 =.0.007 sqm
2x2x0.25x0.01=0.010sqm
1/2x3.142/4x(0.35) = 0.048sqm
1/2x0.35x0.25x3.142 = 0.138sqm.
= 1. 092sqm say 1.09 sqm of
Centering & shuttering including strutting, propping etc. Foundations, footings, bases o
(v) 6mm cement plaster 1:3 (1 Cement :3 fine sand)Qty. as per centering and shuttering =
1.092sqm
0.35x0.835 = 0.292sqm
0.37x0.10 = 0.037sqm
1/2x3.142/4x(0.35) = 0.048sqm
2x0.37x0.01 = 0.007 sqm
= 1.476 sqm Say 1.48 sqm
Cement
Carriage of cement
Fine sand
Carrige of fine sand
Labour for mortar
Beldar
Bhishti
Hire and running charges of mixer
Sundries
LABOUR FOR PLASTER
Mason
Coolie
Bhishti
Extra for removing burr
Scaffolding, sundries etc.
(VI) LABOUR FOR FIXING
Beldar
Carriage to site

0.10

4904.97

0.01
0.02
0.004
0.004
0.004

247.00
260.00
301.00
273.00
260.00

4.81

56.77

1.09

166.88

0.054
0.054
0.011
0.011

5000.00
77.87
640.00
87.60

Day
Day
L.S.
L.S.

0.008
0.0007
0.03
0.13

247.00
260.00
1.49
1.49

Day
Day
Day
L.S.
L.S.

0.075
0.111
0.136
1.95
1.82

287.00
247.00
260.00
1.49
1.49

Day
L.S.

0.20
13.52

247.00
1.49
Total:

Day
Day
Day
Day
Day

tonne
tonne
cum
cum

Page 655 of 2298

Add water charges @ 1% except on [A]+[B]+[C] i.e on

455.06

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

459.61
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1474.01
Rs 1473.95

Item Code: 16.24.2

P/F precast reinforced cement concrete 1 : 1.5 : 3 Km. stone as per standard design i/c. finishing smooth in 1 : 3. 50 x 152.52 x 25
cm size.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one stone
(i) Cement concrete 1:1.5:3 (1 cement: 1.5 Coarse sand :3
graded stone aggregate 20mm nominal size)
0.50x0.25x1.145m = 0.143cum. +
0.52x0.27x0.13m = 0.018cum. +
l/2x22/7x(0.25)2x0.25m = 0.025cum.
= 0.186 cum.
Say0.19cum.
04.001.02 P/L CC excluding centering - All work up to plinth level: 1:1:3
0.19
4904.97
- Coarse sand, 20mmstone
(ii) Extra for laying cement concrete in RCC work
0114
Beldar
Day
0.019
247.00
0101
Bhishti
Day
0.038
260.00
0123
Mason 1st class
Day
0.008
301.00
0124
Mason 2nd class
Day
0.008
273.00
0128
Mate
Day
0.008
260.00
(iii) M.S. reinforcement0.19cum @48.06kg/cum. =9.131kg.
Say 9.13 kg.
05.022.01 Reinforcement for R.C.C. work all complete. -Upto plinth level
9.13
56.77
Mild steel and Medium Tensi
(iv) Centering and shuttering(0.50+2x0.25)xl.l45 = 1.145 sqm
l/2x(0.25) x 3.142 = 0.098
3.142(0.25)x0.25=0.196
(0.52+2x0.27)x0.13 =0.138
2x0.52x0.01 =0.10
2x2x0.25x0.01 =0.010
1x0.50x0.25=0.125
= 1.722sqm. Say 1.72 sqm
05.009.01 Centering & shuttering including strutting, propping etc. 1.72
166.88
Foundations, footings, bases o
(v) 6mm cement plaster 1:3 (1 Cement :3 fine sand)Qty. as per centering and shuttering =
1.722sqm. +
0.50x1.145 = 0.572 +
0.52x0.13 ,=_0.068sqm.+
l/2x(0.25) x3.142 = 0.098 +
2x0.52x001 =0.010
= 2.470sqm Sq. 2.47 sqm.
0367
Cement
tonne
0.09
5000.00
2209
Carriage of cement
tonne
0.09
77.87
0983
Fine sand
cum
0.20
640.00
2261
Carriage of fine sand
cum
0.20
87.60
Labour for mortar
0114
Beldar
Day
0.013
247.00

DSR-12

Page 656 of 2298

0101
9999
9999
0155
0115
0101
9999
9999
0114
9999

Bhishti
Hire and running charges of mixer
Sundries
Labour for plaster
Mason
Coolie
Bhishti
Extra for removing burr
Scaffolding, sundries etc.
(vi) Labour for fixing
Beldar
Carriage to site

Day
L.S.
L.S.

0.001
0.52
0.26

260.00
1.49
1.49

Day
Day
Day
L.S.
L.S.

0.126
0.185
0.227
3.38
2.86

287.00
247.00
260.00
1.49
1.49

Day
L.S.

0.20
13.52

247.00
1.49
Total:
848.12

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

856.60
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2722.37
Rs 2722.25

Item Code: 16.24.3

P/F precast reinforced cement concrete 1 : 1.5 : 3 Km. stone as per standard design i/c. finishing smooth in 1 : 3. 35 x 93.5 x 18 cm
size.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one stone
(i) Cement concrete 1:1.5:3 (1 cement :1.5 Coarse sand :3
graded stone aggregate 20mm nominal size)
0.35x0.18x0.835m = 0.0526 cum. +
0.37x0.20x0.10m = 0.0074 cum. =
0.060 cum.
04.001.02 P/L CC excluding centering - All work up to plinth level: 1:1:3
0.06
4904.97
- Coarse sand, 20mmstone
(ii) Extra for laying cement concrete in RCC work
0114
Beldar
Day
0.006
247.00
0101
Bhishti
Day
0.012
260.00
0123
Mason 1 st class
Day
0.0024
301.00
0124
Mason 2nd class
Day
0.0024
273.00
0128
Mate
Day
0.0024
260.00
(iii) M.S. reinforcement0.06cum @48.06kg/cum. =2.8836 kg. Say 2.88 kg.
05.022.01 Reinforcement for R.C.C. work all complete. -Upto plinth level
2.88
56.77
Mild steel and Medium Tensi
(iv) Centering and shuttering(0.35+2x0.18)x0.835 = 0.593 sqm
(0.37+2x0.20)x0.10 = 0.077 sqm
2x0.35x0.18 = 0.126 sqm
2x0.37x0.01 =0.007sqm
2x2x0.18x0.01 =0.007sqm
= 0.810 sqm
05.009.01 Centering & shuttering including strutting, propping etc. 0.81
166.88
Foundations, footings, bases o
(v) 6mm cement plaster 1:3(1 Cement :3 fine sand)Qty. as per centering and shuttering = 0.810sqm
0.35x0.835 = 0.292sqm
0.37x0.10 =0.037sqm
2x0.37x0.01 =0.007sqm =
1.146 sqm Say 1.15sqm

DSR-12

Page 657 of 2298

0367
2209
0983
2261
0114
0101
9999
9999
0155
0115
0101
9999
9999
0114
9999

Cement
Carriage of cement
Fine sand
Carriage of fine sand
LABOUR FOR MORTAR
Beldar
Bhishti
Hire and running charges of mixer
Sundries
LABOUR FOR PLASTER
Mason
Coolie
Bhishti
Extra for removing burr
Scaffolding, sundries etc.
(VI) LABOUR FOR FIXING
Beldar
Carriage to site

tonne
tonne
cum
cum

0.042
0.042
0.009
0.009

5000.00
77.87
640.00
87.60

Day
Day
L.S.
L.S.

0.006
0.0006
0.26
0.13

247.00
260.00
1.49
1.49

Day
Day
Day
L.S.
L.S.

0.058
0.086
0.105
1.56
1.30

287.00
247.00
260.00
1.49
1.49

Day
L.S.

0.10
13.52

247.00
1.49
Total:
342.93

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

346.36
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 991.28
Rs 991.25

Item Code: 16.25

Surface dressing on new surf- ace with paving of A-90/S-90 using 2.25 Kg bitumen per Sqm with 1.65 Cum of stone chipping 13.2
mm n/s.
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Rate
Bitumen [email protected] per sqm. =225 kg = 0.225 tonne.
0309
Bitumen S-90 @ 2.25kg per sqm. =225kg. = 0.225tonne
tonne
0.225
37000.00
2211
Carriage of bitumen
tonne
0.225
87.60
Stone aggregate 13.2mm nominal size @1.65cum. per
100sqm.
2910
Stone chippings 13.2mm
cum
1.65
1050.00
2202
Carriage of stone aggregate
cum
1.65
87.60
0370
Steam coal for heating bitumen @2 qunital per tonne of quint
0.45
400.00
bitumen = 2x0.225=0.450q
2200
Carrige of steam coal
tonne
0.045
100.11
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate
(a) For cleaning:
0128
Mate
Day
0.11
260.00
0114
Beldar
Day
1.40
247.00
0115
Coolie
Day
1.40
247.00
(b) For heating and spraying bitumen :
0130
Mistry
Day
0.08
301.00
0138
Spray man
Day
0.11
260.00
0114
Beldar
Day
0.93
247.00
(c) For screening and spreading aggregate :
0128
Mate
Day
0.11
260.00
0114
Beldar
Day
0.93
247.00
0115
Coolie
Day
1.55
247.00
(d) Consolidation Charges
0113
Chowkidar (at barriers for night watch and for road roller)
Day
0.27
247.00

DSR-12

Page 658 of 2298

0101
0003
0001
0007
1235
9999
0364
0365
9999
9999

Bhishti
Hire charges of road roller
Hire charges for boiler
Hire charges for tar sprayer unit
Diesel for road roller @ 18 litres
Carriage of diesel
(e) Misc:
Brushes etc. for cleaning, Wire bursh (with thick wire)
Soft brush
Brooms and gunny bags
Sundries

Day
Day
Day
Day
litre
L.S.

0.11
0.11
0.12
0.11
2.00
2.73

260.00
1500.00
800.00
300.00
41.29
1.49

each
each
L.S.
L.S.

0.11
0.32
6.76
6.76

20.00
18.00
1.49
1.49
Total:
12554.04

Add water charges @ 1% on

Add C.P & OH @15% on

12679.58
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 145.82
Rs 145.80

Item Code: 16.26

Surface dressing on new surface in two coats with bitumen of grade A-90/S-90.
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Rate
1.8kg/sqm.=180kg.=0.18 tonne
(a) For cleaning:
2211
Carriage of bitumen
tonne
0.18
87.60
(b) For heating and spraying bitumen :
2910
Stone chippings 13.2mm nominal size @1.5cum. per 100sqm. cum
1.50
1050.00

2202
0370
2200

0115

0130
0138
0114

0128
0114
0309
0115
0003
0113

DSR-12

(c) For screening and spreading aggregate :

Carriage of stone aggregate
cum
(d) Consolidation Charges
Steam coal for heating bitumen @2 qunital per tonne
quint
(e) Misc:
Carriage of steam coal Labour for cleaning the road surface, tonne
heating and spraying bitumen
Second Coat
sqm.= l 10kg.=0.11 tonne
tonne of bitumen
Labour for cleaning the road surface, heating
Coolie
Day
and spraying bitumen and aggregate
(a) For cleaning and brushing loose chips:
Mistry
Day
(b) For heating and spraying bitumen :
Sprayman
Day
(c) For screening and spreading aggregate :
Beldar
Day
(d) Consolidation Charges
road roller)
Mate
Day
(e) Misc:
Beldar
Day
thick wire)
Bitumen S-90/A-90 @
tonne
Coolie
Day
Hire charges of road roller
Day
Chowkidar
Day

1.50

87.60

0.36

400.00

0.036

100.11

1.40

247.00

0.08

301.00

0.11

260.00

1.38

247.00

0.27

260.00

0.85

247.00

0.18
0.85
0.11
0.11

37000.00
247.00
1500.00
247.00

Page 659 of 2298

0001
0101
0007
1235
0364
0365
9999
0309
2911
2211
2202
9999
0370
9999
2200
0003
0007
1235
0001
0364
0365
0114
0128
0115
0128
0130
0138
0114
0128
0114
0115
0113
0101
9999
9999

Hire charges for boiler

Bhishti
Hire charges for tar sprayer unit
Diesel for road roller @ 18 litres/day
Brushes etc. for cleaning, Wire brush thick wire)
Soft brush
Details of cost for 100sqm
Carriage of diesel
Bitumen S-90/A-90 @ 1.10kg per
Stone chippings 10mm/11.2mm
Carriage of bitumen
Carriage of aggregate
Brooms and gunny bags
Steam coal for heating bitumen @2 qunital per
Sundries
Carriage of steam coal
Hire charges of road roller
Hire charges for tar sprayer unit
Diesel for road roller @ 18 litres
Hire charges of boiler
Brushes etc. for cleaning, Wire bursh (with
Soft brushes
Beldar
Mate
Coolie
Mate
Mistry
Sprayman
Beldar
Mate
Belder
Coolie
Chowkidar(at barrier for night watch and for
Bhishti
Carriage of diesel
Sundries

Day
Day
Day
litre
each
each

0.12
0.11
0.11
2.00
0.11
0.32

800.00
260.00
300.00
41.29
20.00
18.00

L.S.
tonne
cum
tonne
cum
L.S.
quint
L.S.
tonne
Day
Day
litre
Day
each
each
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
L.S.
L.S.

2.73
0.11
1.00
0.11
1.00
6.76
0.22
16.38
0.022
0.06
0.07
1.08
0.06
0.03
0.09
1.40
0.06
0.97
0.11
0.05
0.07
0.75
0.07
0.62
0.62
0.15
0.06
1.43
9.49

1.49
37000.00
1050.00
87.60
87.60
1.49
400.00
1.49
100.11
1500.00
300.00
41.29
800.00
20.00
18.00
247.00
260.00
247.00
260.00
301.00
260.00
247.00
260.00
247.00
247.00
247.00
260.00
1.49
1.49
Total:
16992.81

Add water charges @ 1% on

Add C.P & OH @15% on

17162.74
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 197.37
Rs 197.35

Item Code: 16.27

Surface dressing on old surface with hot bitumen of grade A-90/S-90.
Code
0309
2911
2211
2202
0370
2200

DSR-12

Description

Details of Cost for : 100.00 Sqm

Unit
Quantity

MATERIAL:
Bitumen 1.95kg./sqm.= 195kg. or 0.195t
tonne
Stone chippings 11.2mm nominal size @
cum
1.50cum. per 100 sqm.
Carriage of bitumen
tonne
Carriage of aggregate
cum
Steam coal for heating bitumen @2 quintal per tonne of quint
bitumen
Carriage of steam coal
tonne

Rate

0.195
1.50

37000.00
1050.00

0.195
1.50
0.39

87.60
87.60
400.00

0.039

100.11

Page 660 of 2298

0128
0114
0115
0130
0138
0114
0128
0114
0115
0113
0101
0003
1235
9999
0007
0001
0364
0365
9999
9999

Labour for cleaning the road surface, heating and spraying

bitumen and aggregate etc.
(a) For cleaning:
Mate
Beldar
Coolie
(b) For heating and spraying bitumen :
Mistry
Sprayman
Beldar
(c) For screening and spreading aggregate :
Mate
Beldar
Coolie
(d) Consolidation Charges
Chowkidar
Bhishti
Hire charges of road roller
Diesel for road roller @ 18 litres per day
Carriage of diesel
Hire charges for tar sprayer
Hire charges of boiler
(e) Misc:
Brushes etc. for cleaning, Wire bursh (with thick wire)
Soft brush
Brooms and gunny bags
Sundries

Day
Day
Day

0.06
0.49
0.97

260.00
247.00
247.00

Day
Day
Day

0.05
0.06
0.69

301.00
260.00
247.00

Day
Day
Day

0.66
0.51
0.51

260.00
247.00
247.00

Day
Day
Day
litre
L.S.
Day
Day

0.15
0.06
0.06
1.08
1.43
0.06
0.06

247.00
260.00
1500.00
41.29
1.49
300.00
800.00

each
each
L.S.
L.S.

0.05
0.12
2.73
5.33

20.00
18.00
1.49
1.49
Total:
10369.76

Add water charges @ 1% on

Add C.P & OH @15% on

10473.46
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 120.44
Rs 120.45

Item Code: 16.28.1

Surface dressing one coat on new surface with bitumen : Using bitumen emulsion (min. 50 % bitumen content-RS grade conforming
to IS :8837).
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Rate
0310
Bitumen emulsion
tonne
0.195
28500.00
2211
Carriage of bitumen
tonne
0.195
87.60
2910
Stone chippings 13.2mm @1.50 cum. per 100 sqm. = cum
1.50
1050.00
1.50cum.
2202
Carriage of stone aggregate
cum
1.50
87.60
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate :
(a) For cleaning:
0128
Mate
Day
0.11
260.00
0114
Beldar
Day
1.40
247.00
0115
Coolie
Day
1.40
247.00
(b) For Spraying bitumen emulsion :
0130
Mistry
Day
0.07
301.00
0138
Sprayman
Day
0.10
260.00
0114
Beldar
Day
1.00
247.00
(c) For screening and spreading aggregate :
0128
Mate
Day
0.11
260.00
0114
Beldar
Day
0.85
247.00

DSR-12

Page 661 of 2298

0115
0113
0101
0003
0007
1235
9999
0364
0365
9999
9999

Coolie
(d) Consolidation Charges
Chowkidar
Bhishti
Hire charges of road roller
Hire charges for tar sprayer
Diesel for road roller @ 18 litres per day
Carriage of diesel
(e) Misc:
Brushes etc. for cleaning, Wire bursh (with thick wire)
Soft brush
Brooms and gunny bags
Sundries

Day

0.85

247.00

Day
Day
Day
Day
litre
L.S.

0.27
0.27
0.11
0.10
2.00
2.73

247.00
260.00
1500.00
300.00
41.29
1.49

each
each
L.S.
L.S.

0.11
0.32
6.76
9.49

20.00
18.00
1.49
1.49
Total:
9194.46

Add water charges @ 1% on

Add C.P & OH @15% on

9286.40
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 106.79
Rs 106.80

Item Code: 16.29.1

Surface dressing one coat on old surface with bitumen : Using bitumen emulsion (min. 50 % bitumen content-RS grade conforming
to IS : 8837).
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Rate
0310
Bitumen emulsion @1.22 kg per Sqm. =122 kg. or 0.122 tonne tonne
0.122
28500.00
2211
2911
2202

0128
0114
0115
0130
0138
0114
0128
0114
0115
0113
0101
0003
0007
1235
9999
0364
0365
9999
9999

DSR-12

Carriage of bitumen emulsion

Stone chippings 11.2mm nominal size @ 1.10cum. per 100
sqm.
Carriage of stone chippings
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate :
(a) For cleaning:
Mate
Beldar
Coolie
(b) For Spraying bitumen emulsion :
Mistry
Sprayman
Beldar
(c) For screening and spreading aggregate :
Mate
Beldar
Coolie
(d) Consolidation Charges
Chowkidar
Bhishti
Hire charges of road roller
Hire charges for tar sprayer
Diesel for road roller @ 18 litres per day
Carriage of diesel
(e) Misc:
Brushes etc. for cleaning, Wire brush (with thick wire)
Soft brush
Brooms and gunny bags
Sundries

tonne
cum

0.122
1.10

87.60
1050.00

cum

1.10

87.60

Day
Day
Day

0.06
0.49
0.97

260.00
247.00
247.00

Day
Day
Day

0.05
0.06
0.63

301.00
260.00
247.00

Day
Day
Day

0.07
0.62
0.62

260.00
247.00
247.00

Day
Day
Day
Day
litre
L.S.

0.15
0.15
0.06
0.06
1.08
1.43

247.00
260.00
1500.00
300.00
41.29
1.49

each
each
L.S.
L.S.

0.11
0.32
2.73
5.33

20.00
18.00
1.49
1.49

Page 662 of 2298

Add water charges @ 1% on

Total:
5876.75

Add C.P & OH @15% on

5935.52
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 68.26
Rs 68.25

Item Code: 16.30.1

P/L applying tack coat using hot straight run bitumen of grade 80/100 : On W.B.M. @ 0.75 Kg/Sqm.
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Rate
2916
Bitumen 80/100
tonne
0.075
37500.00
2211
Carriage of bitumen
tonne
0.075
87.60
0370
Steam coal
quint
0.15
400.00
2200
Carriage of steam coal
tonne
0.015
100.11
Materials for cleaning the road surface :
0364
Wire brush (with thick wire)
each
0.05
20.00
0365
Soft brush
each
0.12
18.00
9999
Gunny bags
L.S.
7.80
1.49
0007
Spray unit
Day
0.03
300.00
9999
Sundries
L.S.
9.10
1.49
LABOUR:
(a) For cleaning:
0128
Mate
Day
0.06
260.00
0114
Beldar
Day
1.46
247.00
(b) For heating bitumen:
0114
Beldar
Day
0.19
247.00
(c) For applying tack coat:
0114
Beldar
Day
0.47
247.00
Total:
Add water charges @ 1% on
3457.15
Add C.P & OH @15% on
3491.72
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 40.15
Rs 40.15

Item Code: 16.30.2

P/L applying tack coat using hot straight run bitumen of grade 80/100 : On bituminous surface @ 0.50 Kg/Sqm.

Code
2916
2211
0370
2200
0364
0365
9999
0007
9999

0128

DSR-12

Description
Bitumen 80/100
Carriage of bitumen
Steam coal
Carriage of steam coal
Materials for cleaning the road surface :
Wire brush (with thick wire)
Soft brush
Gunny bags
Spray unit
Sundries
LABOUR:
(a) For cleaning:
Mate

Details of Cost for : 100.00 Sqm

Unit
Quantity
Rate
tonne
0.05
37500.00
tonne
0.05
87.60
quint
0.10
400.00
tonne
0.01
100.11
each
each
L.S.
Day
L.S.

0.05
0.12
7.80
0.03
7.80

20.00
18.00
1.49
300.00
1.49

Day

0.06

260.00

Page 663 of 2298

0114
0114
0114

Beldar
(b) For heating bitumen:
Beldar
(c) For applying tack coat:
Beldar

Day

1.46

247.00

Day

0.19

247.00

Day

0.47

247.00
Total:
2495.02

Add water charges @ 1% on

Add C.P & OH @15% on

2519.97
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 28.98
Rs 29.00

Item Code: 16.31.1.1

P/A tack coat using bitumen emulsion , using emulsion pressure distributer including preparing the surface & cleaning with
mechanical broom - With rapid setting bitumen emulsion - On W.B.M / W.M.M. @ 0.4kg/sqm

Code
7382
2211
0075
0058
0061
0128
0114

Description

Details of Cost for : 3500.00 Sqm

Unit
Quantity

A) MATERIAL:
Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887- tonne
1995
Carraige of Tar bitumen
tonne
B) MACHINERY
Road sweeper (Mechamical Broom) @ 1250 sqm per hour
hour
Air compressor
Emulsion Pressure Distributor @ 1750 sqm per hour
(C) LABOUR :
Mate
Beldar

Rate

1.40

27700.00

1.40

87.60

2.80

360.00

hour
hour

2.80
2.00

325.00
800.00

Day
Day

0.08
2.00

260.00
247.00
Total:
42935.44

Add water charges @ 1% on

Add C.P & OH @15% on

43364.79
Cost for 3500.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 14.25
Rs 14.25

Item Code: 16.31.1.2

P/A tack coat using bitumen emulsion , using emulsion pressure distributer including preparing the surface & cleaning with
mechanical broom - With rapid setting bitumen emulsion - On bituminous surface @ 0.25kg/sqm

Code
7382
2211
0075
0058
0061
0128

DSR-12

Description

Details of Cost for : 3500.00 Sqm

Unit
Quantity

A) MATERIAL:
Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887- tonne
1995
Carraige of Tar bitumen
tonne
B) MACHINERY
Road sweeper (Mechamical Broom) @ 1250 sqm per hour
hour
Air compressor
Emulsion Pressure Distributor @ 1750 sqm per hour
(C) LABOUR :
Mate

Rate

0.875

27700.00

0.875

87.60

2.80

360.00

hour
hour

2.80
2.00

325.00
800.00

Day

0.08

260.00

Page 664 of 2298

0114

Beldar

Day

2.00

Add water charges @ 1% on

247.00
Total:
28346.95

Add C.P & OH @15% on

28630.42
Cost for 3500.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 9.41
Rs 9.40

Item Code: 16.31.2.1

P/A tack coat using bitumen emulsion , using emulsion pressure distributer including preparing the surface & cleaning with
mechanical broom - With medium setting bitumen emulsion - On W.B.M / W.M.M. @ 0.4kg/sqm

Code
7742
2211
0075
0058
0061
0128
0114

Description

Details of Cost for : 3500.00 Sqm

Unit
Quantity

A) MATERIAL:
Bitumen emulsion medium setting (M.S.) confirming to IS : tonne
8887-1995
Carraige of Tar bitumen
tonne
B) MACHINERY
Road sweeper (Mechamical Broom) @ 1250 sqm per hour
hour
Air compressor
Emulsion Pressure Distributor @ 1750 sqm per hour
(C) LABOUR :
Mate
Beldar

Rate

1.40

28200.00

1.40

87.60

2.80

360.00

hour
hour

2.80
2.00

325.00
800.00

Day
Day

0.08
2.00

260.00
247.00
Total:
43635.44

Add water charges @ 1% on

Add C.P & OH @15% on

44071.79
Cost for 3500.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 14.48
Rs 14.50

Item Code: 16.31.2.2

P/A tack coat using bitumen emulsion , using emulsion pressure distributer including preparing the surface & cleaning with
mechanical broom -With medium setting bitumen emulsion - On bituminous surface @ 0.25kg/sqm

Code
7742
2211
0075
0058
0061
0128
0114

Description

Details of Cost for : 3500.00 Sqm

Unit
Quantity

A) MATERIAL:
Bitumen emulsion medium setting (M.S.) confirming to IS : tonne
8887-1995
Carraige of Tar bitumen
tonne
B) MACHINERY
Road sweeper (Mechamical Broom) @ 1250 sqm per hour
hour
Air compressor
Emulsion Pressure Distributor @ 1750 sqm per hour
(C) LABOUR :
Mate
Beldar

0.875

28200.00

0.875

87.60

2.80

360.00

hour
hour

2.80
2.00

325.00
800.00

Day
Day

0.08
2.00

260.00
247.00
Total:
28784.45

Add water charges @ 1% on

DSR-12

Rate

Page 665 of 2298

Add C.P & OH @15% on

29072.29
Cost for 3500.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 9.55
Rs 9.55

Item Code: 16.32.1

2 Cm premix carpet surfacing with 1.8 Cum and 0.90 Cum of stone chippings of 13.2 mm size and 11.2 mm size and 52 kg and 56 kg
of hot bitumen per Cum of stone: With paving Asphalt 80/100 @ 70 grams per kg of asphalt.

Code

2916
2211
2914
2342
2910
2911
2202
0370
2200

0128
0114
0115
0114
0130
0114
0113
0101
0003
1235
9999
0001
0023
0364
0365
9999
9999

Details of Cost for : 100.00 Sqm

Unit
Quantity

Description
Asphalt 80/100
(i) Hot bitumen @52kg.per cum. of stone
chippings 1.8cum. of 13.2mm nominal size chippings.
(ii) Hot bitumen @56kg. per cum. of stone chippings 0.90cum.
of 11.2mm nominal size chippings.
Bitumen :52xl.8+56x0.9=144kg. or 0.144 tonne.
Carriage of bitumen
Solvent 70gms/kg. for 0.144 t = 10.08kg.
Carriage of solvent
Stone chippings 13.2mm nominal size @1.80cum. per 100
sqm.
Stone chippings 11.2mm nominal size @0.90cum. per 100
sqm.
Carriage of aggregate
Steam coal for heating bitumen @ 2 qunitals
per tonne of bitumen = 2x0.144=0.288q
Carriage of steam coal
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate :
(a) For cleaning:
Mate
Beldar
Coolie
(b) For heating bitumen:
Beldar
(c) For screening and spreading premixed aggregate :
Mistry
Beldar
(d) Consolidation Charges
Chowkidar(at barrier for night watch and for road roller)
Bhishti
Hire charges of road roller
Diesel for road roller @ 18 litres per day
Carriage of diesel
Hire charges of boiler
Hire charges of Bitumen Concrete Mixer
(e) Misc:
Brushes etc. for cleaning, Wire bursh (with thick wire)
Soft brush
Brooms and gunny bags
Sundries

tonne
tonne
kilog
quint
cum

Rate

0.144
0.144
10.08
0.10
1.80

37500.00
87.60
23.00
8.76
1050.00

cum

0.90

1050.00

cum
quint

2.70
0.288

87.60
400.00

tonne

0.0288

100.11

Day
Day
Day

0.08
1.40
1.40

260.00
247.00
247.00

Day

0.57

247.00

Day
Day

0.19
5.00

301.00
247.00

Day
Day
Day
litre
L.S.
Day
Day

0.27
0.11
0.11
2.00
2.73
0.13
0.04

247.00
260.00
1500.00
41.29
1.49
800.00
4000.00

each
each
L.S.
L.S.

0.11
0.32
6.76
9.49

20.00
18.00
1.49
1.49
Total:
11623.42

Add water charges @ 1% on

Add C.P & OH @15% on

11739.65
Cost for 100.00 Sqm

DSR-12

Page 666 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 135.01
Rs 135.00

Item Code: 16.32.2

2 Cm premix carpet surfacing with 1.8 Cum and 0.90 Cum of stone chippings of 13.2 mm size and 11.2 mm size and 52 kg and 56 kg
of hot bitumen per Cum of stone: With paving Asphalt 60/70 with no solvent.

Code

7309
2211
2910
2911
2202
0370
2200

0128
0114
0115
0114
0130
0114
0113
0101
0003
1235
9999
0001
0023
0364
0365
9999
9999

Details of Cost for : 100.00 Sqm

Unit
Quantity

Description
Asphalt 60/70
(i) Hot bitumen @52kg.per cum. of stone chippings 1.8cum. of
13.2mm nominal size chippings.
(ii) Hot bitumen @56kg. per cum. of stone chippings 0.90cum.
of 11.2mm nominal size chippings.
Bitumen :52xl.8+56x0.9=144kg. or 0.144 tonne.
Carriage of bitumen
Stone chippings 13.2mm nominal size @1.80cum. per
100sqm.
Stone chippings 11.2mm nominal size @0.90cum. per
100sqm.
Carriage of aggregate
Steam coal for heating of bitumen @2 quintals per tonne of
bitumen =2x0.144=0.288q
Carriage of steam coal
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate :
(a) For cleaning:
Mate
Beldar
Coolie
(b) For heating bitumen:
Beldar
(c) For screening and spreading premixed aggregate :
Mistry
Beldar
(d) Consolidation Charges
Chowkidar(at barrier for night watch and for road roller)
Bhishti
Hire charges of road roller
Diesel for road roller @ 18 litres per day
Carriage of diesel
Hire charges of boiler
Hire charges of Bitumen Concrete Mixer
(e) Misc:
Brushes etc. for cleaning, Wire brush (with thick wire)
Soft brush
Brooms and gunny bags
Sundries

tonne
tonne
cum

Rate

0.144
0.144
1.80

38500.00
87.60
1050.00

cum

0.90

1050.00

cum
quint

2.70
0.288

87.60
400.00

tonne

0.0288

100.11

Day
Day
Day

0.08
1.40
1.40

260.00
247.00
247.00

Day

0.57

247.00

Day
Day

0.19
5.00

301.00
247.00

Day
Day
Day
litre
L.S.
Day
Day

0.27
0.11
0.11
2.00
2.73
0.13
0.04

247.00
260.00
1500.00
41.29
1.49
800.00
4000.00

each
each
L.S.
L.S.

0.11
0.32
6.76
9.49

20.00
18.00
1.49
1.49
Total:
11534.70

Add water charges @ 1% on

Add C.P & OH @15% on

11650.05
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 133.98
Rs 134.00

Item Code: 16.32.3

DSR-12

Page 667 of 2298

2 Cm premix carpet surfacing with 1.8 Cum and 0.90 Cum of stone chippings of 13.2 mm size and 11.2 mm size and 52 kg and 56 kg
of hot bitumen per Cum of stone: With Refinery Modified Bitumen CRMB 55 conforming to IRC : SP : 53-1999.

Code

7739
2211
2914
2342
2910
2911
2202
0370
2200

0128
0114
0115
0114
0130
0114
0113
0101
0003
1235
9999
0001
0023
0364
0365
9999
9999

Details of Cost for : 100.00 Sqm

Unit
Quantity

Description
Asphalt 80/100
(i) Hot bitumen @52kg.per cum. of stone chippings 1.8cum. of
13.2mm nominal size chippings.
(ii) Hot bitumen @56kg. per cum. of stone chippings 0.90cum.
of 11.2mm nominal size chippings.
Modified Bitumen CRMB - 55 (Refinary produced)
:52xl.8+56x0.9=144kg. or 0.144 tonne.
Carriage of bitumen
Solvent 70gms/kg. for 0.144 t = 10.08kg.
Carriage of solvent
Stone chippings 13.2mm nominal size @1.80cum. per
100sqm.
Stone chippings 11.2mm nominal size @0.90cum. per
100sqm.
Carriage of aggregate
Steam coal for heating bitumen @ 2 quintals per tonne of
bitumen = 2x0.144=0.288q
Carriage of steam coal
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate :
(a)For cleaning:
Mate
Beldar
Coolie
(b)For heating bitumen:
Beldar
(c)For screening and spreading premixed aggregate :
Mistry
Beldar
(d)Consolidation Charges
Chowkidar(at barrier for night watch and for road roller)
Bhishti
Hire charges of road roller
Diesel for road roller @ 18 litres per day
Carriage of diesel
Hire charges of boiler
Hire charges of Bitumen Concrete Mixer
(e)Misc:
Brushes etc. for cleaning, Wire brush (with thick wire)
Soft brush
Brooms and gunny bags
Sundries

Rate

Tonne

0.144

38500.00

tonne
kilog
quint
cum

0.144
10.08
0.10
1.80

87.60
23.00
8.76
1050.00

cum

0.90

1050.00

cum
quint

2.70
0.288

87.60
400.00

tonne

0.0288

100.11

Day
Day
Day

0.08
1.40
1.40

260.00
247.00
247.00

Day

0.57

247.00

Day
Day

0.19
5.00

301.00
247.00

Day
Day
Day
litre
L.S.
Day
Day

0.27
0.11
0.11
2.00
2.73
0.13
0.04

247.00
260.00
1500.00
41.29
1.49
800.00
4000.00

each
each
L.S.
L.S.

0.11
0.32
6.76
9.49

20.00
18.00
1.49
1.49
Total:
11767.42

Add water charges @ 1% on

Add C.P & OH @15% on

11885.09
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 136.68
Rs 136.70

Item Code: 16.33.1

DSR-12

Page 668 of 2298

2.5 Cm premix carpet surfacing with 2.25 Cum and 1.12 Cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100
Sqm and 52 Kg and 56 Kg of hot bitumen :- With paving Asphalt 80/100 @ 70 grams per kg of asphalt.

Code

2916
2914
2211
2342
2910
2911
2202
0370
2200

0128
0114
0115
0114
0130
0114
0113
0101
0003
1235
9999
0001
0023
0364
0365
9999
9999

Details of Cost for : 100.00 Sqm

Unit
Quantity

Description
Paving Asphalt 80/100'
(i) Hot bitumen @52kg.per cum. of stone chippings
@2.25cum. of 13.2mm nominal size chippings.
(ii) Hot bitumen @56kg. per cum. of aggregate @ 1.12cum. of
11.2mm nominal size.
Bitumen :52x2.25+56x1.12= 180kg.
Solvent 0.07x180=12.60kg.
Carriage of bitumen
Carriage of solvent
Stone chippings 13.2mm nominal size @1.80cum. per 100
sqm.
Stone chippings 11.2mm nominal size @0.90cum. per 100
sqm.
Carriage of aggregate 2.25+1.12=3.37 cum.
Steam coal for heating of bitumen @2 quintals per tonne of
bitumen =2x0.18=0.36q
Carriage of steam coal
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate :
(a) For cleaning:
Mate
Beldar
Coolie
(b) For heating bitumen:
Beldar
(c) For screening and spreading premixed aggregate :
Mistry
Beldar
(d) Consolidation Charges
Chowkidar
Bhishti
Hire charges of road roller
Diesel for road roller @ 18 litres
Carriage of diesel
Hire charges of boiler
Hire charges of Bitumen Concrete Mixer
(e) Misc:
Brushes etc. for cleaning, Wire brush (with thick wire)
Soft brush
Brooms and gunny bags
Sundries

tonne
kilog
tonne
quint
cum

Rate

0.18
12.60
0.18
0.126
2.25

37500.00
23.00
87.60
8.76
1050.00

cum

1.12

1050.00

cum
quint

3.37
0.36

87.60
400.00

tonne

0.036

100.11

Day
Day
Day

0.08
1.40
1.40

260.00
247.00
247.00

Day

0.71

247.00

Day
Day

0.19
6.25

301.00
247.00

Day
Day
Day
litre
L.S.
Day
Day

0.27
0.11
0.11
2.00
2.73
0.15
0.04

247.00
260.00
1500.00
41.29
1.49
800.00
4000.00

each
each
L.S.
L.S.

0.11
0.32
6.76
9.49

20.00
18.00
1.49
1.49
Total:
14185.80

Add water charges @ 1% on

Add C.P & OH @15% on

14327.66
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 164.77
Rs 164.75

Item Code: 16.33.2

2.5 Cm premix carpet surfacing with 2.25 Cum and 1.12 Cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100
Sqm and 52 Kg and 56 Kg of hot bitumen :- With paving Asphalt 60/70 with no solvent.

DSR-12

Page 669 of 2298

Code

7309
2211
2910
2911
2202
0370
2200

0128
0114
0115
0114

0130
0114
0113
0101
0003
1235
9999
0001
0023
0364
0365
9999
9999

Details of Cost for : 100.00 Sqm

Unit
Quantity

Description
Paving Asphalt 60/70
(i) Hot bitumen @52kg.per cum. of stone chippings
@2.25cum. of 13.2mm nominal size
(ii) Hot bitumen @56kg. per cum. of stone
aggregate @ 1.12cum. of 11.2mm nominal size
Bitumen :52x2.25+50xl. 12= 180kg
Carriage of bitumen
Stone chippings 13.2mm nominal size @2.25cum. per
100sqm.
Stone chippings 11.2mm nominal size @1.12cum. per
100sqm.
Carriage of aggregate 2.25+1.12=3.37 cum.
Steam coal for heating of bitumen @2 quintals per tonne of
bitumen =2x0.18=0.36q
Carriage of steam coal
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate :
(a) For cleaning :
Mate
Beldar
Coolie
(b) For heating bitumen:
Beldar(1.05x0.18)/0.267 = 0.71 nos.
(c) For cleaning, mixing and spreading pre-mix aggregate :
Mistry
Beldar
(d) Consolidation Charges
Chowkidar
Bhishti
Hire charges of road roller
Diesel for road roller @ 18 litres per day
Carriage of diesel
Hire charges of boiler
Hire charges of Bitumen Concrete Mixer
(e) Misc:
Brushes etc. for cleaning, Wire bursh (with thick wire)
Soft brush
Brooms and gunny bags
Sundries

Rate

tonne
tonne
cum

0.18
0.18
2.25

38500.00
87.60
1050.00

cum

1.12

1050.00

cum
quint

3.37
0.36

87.60
400.00

tonne

0.036

100.11

Day
Day
Day

0.08
1.40
1.40

260.00
247.00
247.00

Day

0.71

247.00

Day
Day

0.19
6.25

301.00
247.00

Day
Day
Day
litre
L.S.
Day
Day

0.27
0.11
0.11
2.00
2.73
0.15
0.04

247.00
260.00
1500.00
41.29
1.49
800.00
4000.00

each
each
L.S.
L.S.

0.11
0.32
6.76
9.49

20.00
18.00
1.49
1.49
Total:
14074.90

Add water charges @ 1% on

Add C.P & OH @15% on

14215.65
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 163.48
Rs 163.50

Item Code: 16.33.3

2.5 Cm premix carpet surfacing with 2.25 Cum and 1.12 Cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100
Sqm and 52 Kg and 56 Kg of hot bitumen :- With Refinery Modified Bitumen CRMB 55 conforming to IRC : SP : 53-1999.

Code

Description

Details of Cost for : 100.00 Sqm

Unit
Quantity

Rate

Paving Asphalt 80/100

DSR-12

Page 670 of 2298

7739
2914
2211
2342
2910
2911
2202
0370
2200

0128
0114
0115
0114
0130
0114
0113
0101
0003
1235
9999
0001
0023
0364
0365
9999
9999

(i) Hot bitumen @52kg.per cum. of stone chippings

@2.25cum. of 13.2mm nominal size chippings.
(ii) Hot bitumen @56kg. per cum. of aggregate @1.12cum. of
11.2mm nominal size.
Modified Bitumen CRMB - 55 (Refinery produced)
:52x2.25+56xl.l2=180kg.
Solvent 0.07x180=12.60kg.
Carriage of bitumen
Carriage of solvent
Stone chippings 13.2mm nominal size @2.25 cum. per
100sqm.
Stone chippings 11.2mm nominal size @1.12 cum. per
lOOsqm.
Carriage of aggregate 2.25+1.12=3.37 cum.
Steam coal for heating of bitumen @2 quintals per tonne of
bitumen =2x0.18=0.36q
Carriage of steam coal
Labour for cleaning the road surface, heating and spraying
bitumen and aggregate :
(a)For cleaning:
Mate
Beldar
Coolie
(b)For heating bitumen:
Beldar
(c)For screening and spreading premixed aggregate :
Mistry
Beldar
(d)Consolidation Charges
Chowkidar
Bhishti
Hire charges of road roller
Diesel for road roller @ 18 litres
Carriage of diesel
Hire charges of boiler
Hire charges of Bitumen Concrete Mixer
(e) Misc:
Brushes etc. for cleaning, Wire brush (with thick wire)
Soft brush
Brooms and gunny bags
Sundries

Tonne

0.18

38500.00

kilog
tonne
quint
cum

12.60
0.18
0.126
2.25

23.00
87.60
8.76
1050.00

cum

1.12

1050.00

cum
quint

3.37
0.36

87.60
400.00

tonne

0.036

100.11

Day
Day
Day

0.08
1.40
1.40

260.00
247.00
247.00

Day

0.71

247.00

Day
Day

0.19
6.25

301.00
247.00

Day
Day
Day
litre
L.S.
Day
Day

0.27
0.11
0.11
2.00
2.73
0.15
0.04

247.00
260.00
1500.00
41.29
1.49
800.00
4000.00

each
each
L.S.
L.S.

0.11
0.32
6.76
9.49

20.00
18.00
1.49
1.49
Total:
14365.80

Add water charges @ 1% on

Add C.P & OH @15% on

14509.46
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 166.86
Rs 166.85

Item Code: 16.34

2 Cm premix carpet surfacing with 2.4Cum of stonechippings 11.2 mm nominal size per 100 Sqm and bitumen emulsion (medium
setting min. 65 % bitumen contents) complying with IS: 8887-1995.

Code
7742
2211

DSR-12

Description
Bitumen emulsion M.S. @96kg per cum. of aggregate
96x2.4=230kg =0.230t
Carriage of bitumen emulsion

Details of Cost for : 100.00 Sqm

Unit
Quantity
tonne
tonne

0.23
0.23

Rate
28200.00
87.60

Page 671 of 2298

2911
2202

0130
0114
0113
0101
0003
1235
9999
0023
9999

Stone aggregate 11.2mm nominal size @ 2.4cum. per 100 cum

sqm.
Carriage of stone aggregate
cum
LABOUR
(a)For mixing and spreading premix aggregate :
Mistry
Day
Beldar
Day
(b) Consolidation Charges
Chowkidar
Day
Bhishti
Day
Hire charges of road roller
Day
Diesel for road roller @ 18 litres/day
litre
Carriage of diesel
L.S.
Hire charges of Bitumen Concrete Mixer
Day
Sundries
L.S.

2.40

1050.00

2.40

87.60

0.19
3.54

301.00
247.00

0.27
0.11
0.11
2.00
2.73
0.04
9.49

247.00
260.00
1500.00
41.29
1.49
4000.00
1.49
Total:
10689.04

Add water charges @ 1% on

Add C.P & OH @15% on

10795.93
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 124.15
Rs 124.15

Item Code: 16.35

2.5Cm premix carpet surfacing with 3.0Cum of stonechippings 10 mm nominal size per 100 Sqm and bitumen emulsion (medium
setting min. 65 % bitumen contents) complying with IS: 8887-1995.

Code
7742
2211
2911
2202

0130
0114
0113
0101
0003
1235
9999
9999

Details of Cost for : 100.00 Sqm

Description
Unit
Quantity
Rate
Bitumen emulsion M.S. @96kg per cum. of aggregate
96x3 = 288 kg = 0.2881
tonne
0.288
28200.00
Carriage of bitumen emulsion
tonne
0.288
87.60
Stone aggregate 10 mm nominal size @ 3.00 cum. per 100 cum
3.00
1050.00
sqm.
Carriage of stone aggregate
cum
3.00
87.60
LABOUR
(a)For mixing and spreading premix aggregate:
Mistry
Day
0.19
301.00
Beldar
Day
4.10
247.00
(b)Consolidation Charges
Chowkidar
Day
0.27
247.00
Bhishti
Day
0.11
260.00
Hire charges of road roller
Day
0.11
1500.00
Diesel for road roller @ 18 litres/day
litre
2.00
41.29
Carriage of diesel
L.S.
2.73
1.49
Sundries
L.S.
9.49
1.49
Total:
Add water charges @ 1% on
12990.60
Add C.P & OH @15% on
13120.51
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 150.89
Rs 150.90

Item Code: 16.36.1

DSR-12

Page 672 of 2298

P/L bitumen Penetration Maca- dam with hard stone aggregate with bitumen of suitable penetration grade : For 50 mm compacted
thickness With paving asphalt 80/100 @ 50 kg/10 Sqm.
Details of Cost for : 370.00 Sqm
Code
Description
Unit
Quantity
Rate
(A) MATERIAL:
Taking 40mm = 45%
20mm = 44%
11.2mm = 8%
Stone dust = 3%
0293
Stone aggregate 40mm (one size)
cum
9.99
950.00
0295
Stone aggregate 20mm (one size)
cum
9.77
1050.00
0297
Stone aggregate 11.2mm (one size)
cum
1.78
1050.00
1159
Stone dust
cum
0.60
925.00
Key aggregate
0295
Stone aggregate 20mm (one size)
cum
2.33
1050.00
0296
Stone aggregate 13.2mm (one size)
cum
2.66
1050.00
1159
Stone dust
cum
0.56
925.00
2206
Carriage of stone aggregate 40mm
cum
9.99
95.22
2202
Carriage of stone aggregate 20mm
cum
12.10
87.60
2202
Carriage of stone aggregate 13.2/11.2mm
cum
4.44
87.60
2267
Carriage of stone dust.
cum
1.16
87.60
Bitumen 80/100 @ 50kg/10 sqm.
2916
Bitumen 80/100 grade
tonne
1.85
37500.00
2211
Carriage of bitumen
tonne
1.85
87.60
(B) LABOUR:
0114
Beldar for spreading stone metal
Day
16.67
247.00
0114
Beldar for hand packing
Day
5.33
247.00
0114
Beldar dry rolling
Day
2.67
247.00
0114
Bajri spreader
Day
1.33
247.00
0138
Sprayer
Day
0.67
260.00
0114
Beldar for spreading key aggregate
Day
1.33
247.00
0114
Beldar for spraying bitumen
Day
6.67
247.00
0114
Beldar of power roller
Day
0.67
247.00
0128
Mate
Day
1.77
260.00
(C) MACHINERY :
0001
Bitumen boiler oil fed capacity 1500 lit with
Day
0.45
800.00
spray unit
0003
Road roller (8 to 10 tonne)
Day
0.61
1500.00
9999
Misc. items as spray nozzle, joint paper, coconut oil, country L.S.
351.00
1.49
soap etc.
(D) FUEL:
(i) Diesel for boiler @ 10 litres per hour =
40.00 lit +
(ii) Diesel for road roller @ 18 litt./day =
18x0.61 = 10.98 lit.
1235
Total = 50.98 lit.
litre
50.98
41.29
9999
Carriage of diesel
L.S.
70.07
1.49
Total:
Add water charges @ 1% on
113174.57
Add C.P & OH @15% on
114306.32
Cost for 370.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 355.28
Rs 355.30

Item Code: 16.36.2

P/L bitumen Penetration Maca- dam with hard stone aggregate with bitumen of suitable penetration grade : For 75 mm compacted
thickness With paving asphalt 80/100 @ 68 kg/10 Sqm.

DSR-12

Page 673 of 2298

Code

0292
2206
0295
0297
0294
0296
0297
2916
2202
2211
0114
0114
0114
0114
0138
0114
0114
0114
0128
0001
0003
9999

1235
9999

Description

Details of Cost for : 300.00 Sqm

Unit
Quantity

(A)MATERIAL:
Taking output as 300 sqm. for single layer.
Coarse agg. = 300/10x0.90 = 27 cum.
Key agg = 300/10x0.18 = 5.4 cum.
Bitumen = 300/10x68 = 2.04 t.
Stone aggregate 50mm (one size)
cum
Carraige of Stone aggregate above 40 mm
cum
Stone aggregate 20mm (one size)
cum
Stone aggregate 10mm (one size)
cum
Key aggregate
Stone aggregate 25mm (one size)
cum
Stone aggregate 12.5mm (one size)
cum
Stone aggregate 10mm (one size)
cum
Bitumen 80/100
tonne
Carriage of aggregate
cum
Carriage of bitumen
tonne
(B) LABOUR:
Beldar for spreading stone metal
Day
Beldar for hand packing
Day
Beldar dry rolling
Day
Beldar/Bajri spreader
Day
Sprayer
Day
Beldar for spreading key aggregate
Day
Beldar for spraying bitumen
Day
Beldar road roller
Day
Mate
Day
(C) MACHINERY :
(i) Bitumen boiler oil fed capacity 1500 lit with
Day
spray unit
(ii) Road roller (8 to 10 tonne)
Day
Misc. items as spray nozzle, joint paper, coconut oil, country L.S.
soap etc.
(D) FUEL:
(i) Diesel for boiler @ 10 litres per hour =
40.00 lit
(ii) Diesel for road roller @ 18 lit./day =
18x0.75 = 13.50 lit.
Total = 53.50 lit.
litre
Carriage of diesel
L.S.

Rate

8.10
8.10
14.58
4.32

900.00
95.22
1050.00
1050.00

2.05
2.57
0.81
2.04
24.33
2.04

1000.00
1050.00
1050.00
37500.00
87.60
87.60

25.00
8.00
4.00
2.00
1.00
2.00
10.00
1.00
2.65

247.00
247.00
247.00
247.00
260.00
247.00
247.00
247.00
260.00

0.50

800.00

0.75
429.00

1500.00
1.49

53.50
73.06

41.29
1.49
Total:
130590.38

Add water charges @ 1% on

Add C.P & OH @15% on

131896.28
Cost for 300.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 505.60
Rs 505.60

Item Code: 16.37.1

P/L bitumen mastic wearing course with industrial bitumen of grade 85/25 IS:702: 25 mm thick.
Details of Cost for : 17.40 Sqm
Code
Description
Unit
Quantity
Details of cost for surface area of 17.40 sqm for single layer of
25 mm finished thickness.
MATERIALS:
Taking wearing coat as 1 tonne and density as 2.3 gm/c.c
Volume of bitumen mastic =

DSR-12

Rate

Page 674 of 2298

0313
2211

0295
0296

1159

0784

0297

0313
2211
2202
2267
2208
1235
9999
0139
0130
0138
0139
0128
0016
9999

1000/2300= 0.435 cum surface area =

0.435/0.025 = 17.4 sqm.
(i) Bitumen of penetration 85/25 @ 10.2% by weight of mix

tonne

0.102

37000.00

Carriage of bitumen
tonne
(ii) Weight of coarse aggregate @ 40% (1000 - 150) x 40/100 =
340 kg.
Stone aggregate : 340/43.38x0.0283 = 0.222 cum.
Stone Aggregate 20 mm.
cum
Stone Aggregate 12.5mm
cum
(iii) Weight of fine aggregate @ 15% 850x15/100 = 127.5 kg.,
volume of fine aggregate: 127.5/43.103x0.0283 =0.083 cum

0.102

87.60

0.02
0.202

1050.00
1050.00

Fine aggregate.
(iv) Weight of lime stone dust @ 45%
(850-340-127.5) = 382.50 kg., Volume of lime
stone dust 382.50/2200 =0.174 cum.
Lime aggregate.
(v) Precoated stone chipping for surface finish: Volume of
chips @ 0.005 cum/10 sqm=17.4x0.005/10 = 0.0087 cum say
0.009 cum
Chips aggregate.
Bitumen for precoated stone chipping @ 2%
=0.009x1600x2/100= 0.288 say 0.30 kg.
Bitumen 85/25
Carriage of bitumen
Carriage of Stone aggregate (0.222 + 0.009) =0.231 cum.
Carriage of fine aggregate.
Carriage of Lime dust.
Diesel for mastic cooker (Taking capacity of cooker as one
tonne)
Carriage of diesel
LABOUR:
Skilled Beldar.
Mistry
Sprayer
Skilled Beldar for surface finish.
Mate
Hire/ running charges of mastic cooker
sundries (Sealing of joints, placing angles, wastage materials)

cum

0.083

925.00

cum

0.174

1000.00

cum

0.009

1050.00

tonne
tonne
cum
cum
cum
litre

0.0003
0.0003
0.231
0.083
0.174
100.00

37000.00
87.60
87.60
87.60
87.60
41.29

L.S.

136.50

1.49

Day
Day
Day
Day
Day
Day
L.S.

1.50
0.50
3.50
0.25
0.50
0.50
153.27

260.00
301.00
260.00
260.00
260.00
740.00
1.49

Add water charges @ 1% on

Total:
10906.41

Add C.P & OH @15% on

11015.47
Cost for 17.40 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 728.03
Rs 728.05

Item Code: 16.37.2

P/L bitumen mastic wearing course with industrial bitumen of grade 85/25 IS:702: 25 mm thick.
Details of Cost for : 10.875 Sqm
Code
Description
Unit
Quantity
Details of cost for surface area of 10.875sqm
for single layer of 40 mm finished thickness.
MATERIALS:
Taking wearing coat as 1 tonne and density as
2.3 gm/c.c Volume of bitumen mastic =

DSR-12

Rate

Page 675 of 2298

0313
2211

0295
0296

1159

0784

0297

0313
2211
2202
2267
2208
1235
9999
0139
0130
0138
0139
0128
0016
9999

1000/2300= 0.435 cum

Surface Area=0,435/0.040 = 10.875 sqm.
(i) Bitumen of penetration 85/25 @ 10.2% by weight of mix

tonne

0.102

37000.00

Carriage of bitumen
tonne
(ii) Weight of coarse aggregate @ 40% (1000 - 150) x 40/100 =
340 kg.
Stone aggregate : 340/43.38x0.0283 = 0.222 cum.
Stone Aggregate 20 mm.
cum
Stone Aggregate 12.5mm
cum
(iii) Weight of fine aggregate @ 15% 850x15/100 = 127.5 kg.,
volume of fine aggregate: 127.5/43.103x0.0283 =0.083 cum

0.102

87.60

0.02
0.202

1050.00
1050.00

Fine aggregate.
(iv) Weight of lime stone dust @ 45% (850-340-127.5) =
382.50 kg., Volume of lime stone dust 382.50/2200 =0.174
cum.
Lime aggregate.
(v) Precoated stone chipping for surface finish: Volume of
chips @ 0.005 cum/10 sqm=17.4x0.005/10 = 0.0087 cum say
0.009 cum
Chips aggregate.
Bitumen for precoated stone chipping @ 2%
=0.009x1600x2/100= 0.288 say 0.30 kg.
Bitumen 85/25
Carriage of bitumen
Carriage of Stone aggregate (0.222 + 0.009) =0.231 cum.
Carriage of fine aggregate.
Carriage of Lime dust.
Diesel for mastic cooker
(Taking capacity of cooker as one tonne)
Carriage of diesel
LABOUR:
Skilled Beldar.
Mistry
Sprayer
Skilled Beldar for surface finish.
Mate
Hire/ running charges of mastic cooker
sundries (Sealing of joints, placing angles, wastage materials)

cum

0.083

925.00

cum

0.174

1000.00

cum

0.009

1050.00

tonne
tonne
cum
cum
cum

0.0003
0.0003
0.231
0.083
0.174

37000.00
87.60
87.60
87.60
87.60

litre
L.S.

100.00
136.50

41.29
1.49

Day
Day
Day
Day
Day
Day
L.S.

1.50
0.50
3.50
0.25
0.50
0.50
153.27

260.00
301.00
260.00
260.00
260.00
740.00
1.49

Add water charges @ 1% on

Total:
10906.41

Add C.P & OH @15% on

11015.47
Cost for 10.875 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 1164.85
Rs 1164.85

Item Code: 16.38.1

2.5 Cm thick bitumastic sheet with hot bitumen : With paving Asphalt 80/100 @ 70 grams per kg of asphalt.
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Rate
80/100 bitumen @56kg. per cum. of aggregate
and 128kg. per cum. of sand:
56xl.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg =0.211t
2916
= Total= 0.303t
tonne
0.303
37500.00

DSR-12

Page 676 of 2298

2914
2211
2342
2910
2911
2202
0370
2200
0982
2203

0128
0114
0115
0114

0130
0114
0113
0101
0003
0001
0023
1235
9999
0364
0365
9999
9999

Solvent 0.070 kg. x 303 kg. = 21.21kg

Carraige of Tar bitumen
Carriage of solvent
Stone chippings 13.2mm nominal size
Stone chippings 11.2mm nominal size
Carriage of stone chippings
Coal (steam)
Carraige of Steam coal
Coarse sand
Carraige of Coarse sand
Labour for cleaning road surface, heating
bitumen mixing and spreading aggregate :
(a) For cleaning:
Mate
Beldar
Coolie
(b) For heating bitumen :
Beldar
(c) For cleaning, mixing and spreading pre-mix aggregate :

kilog
tonne
quint
cum
cum
cum
quint
tonne
cum
cum

21.21
0.303
0.212
0.99
0.66
1.65
0.606
0.0606
1.65
1.65

23.00
87.60
8.76
1050.00
1050.00
87.60
400.00
100.11
1120.00
87.60

Day
Day
Day

0.16
1.40
1.40

260.00
247.00
247.00

Day

1.19

247.00

Mistry
Beldar
(d) Consolidation charges :
Chowkidar (at barriers for night watch and for road roller)

Day
Day

0.24
6.12

301.00
247.00

Day

0.34

247.00

Bhisti
Hire charges of Diesel Road Roller - 8 to 10 tonne
Hire charges of Coaltar Boiler 900 to 1400 litres
Hire charges of Bitumen Concrete Mixer
Diesel for road roller
Carriage of diesel
(e) Misc:
Wire brush (with thick wire)
Soft brush
Brooms and gunny bags
Sundries

Day
Day
Day
Day
litre
L.S.

0.13
0.13
0.21
0.05
2.34
5.33

260.00
1500.00
800.00
4000.00
41.29
1.49

each
each
L.S.
L.S.

0.13
0.40
7.15
8.97

20.00
18.00
1.49
1.49
Total:
19426.95

Add water charges @ 1% on

Add C.P & OH @15% on

19621.22
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 225.64
Rs 225.65

Item Code: 16.38.2

2.5 Cm thick bitumastic sheet with hot bitumen : With paving Asphalt 60/70.
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Rate
60/70 bitumen @56kg. per cum. of aggregate and 128kg. per
cum. of sand:
56x1.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg = 0.211 t
7309
Total= 0.303t
tonne
0.303
38500.00
2211
Carriage of bitumen
tonne
0.303
87.60
2910
Stone chippings 13.2mm nominal size
cum
0.99
1050.00
2911
Stone chippings 11.2mm nominal size
cum
0.66
1050.00
2202
Carriage of stone chippings
cum
1.65
87.60

DSR-12

Page 677 of 2298

0370
2200
0982
2203

0128
0114
0115
0114

0130
0114
0113
0101
0003
0001
0023
1235
9999
0364
0365
9999
9999

Steam coal for heating bitumen @ 2 quintals per tonne of

bitumen = 2x0.303=0.606q
Carriage of steam coal
Coarse sand
Carriage of sand
Labour for cleaning road surface, heating bitumen mixing and
spreading aggregate :
(a) For cleaning:
Mate
Beldar
Coolie
(b) For heating bitumen :
Beldar
(c) For cleaning, mixing and spreading pre-mix aggregate :

quint

0.606

400.00

tonne
cum
cum

0.0606
1.65
1.65

100.11
1120.00
87.60

Day
Day
Day

0.16
1.40
1.40

260.00
247.00
247.00

Day

1.19

247.00

Mistry
Beldar
(d) Consolidation charges:
Chowkidar (at barriers for night watch and for road roller)

Day
Day

0.24
6.12

301.00
247.00

Day

0.34

247.00

Bhishti
Hire charges for road roller
Hire charges for boiler
Hire charges of Bitumen Concrete Mixer
Diesel for road roller
Carriage of diesel
(e) Misc :
Wire brush (with thick wire)
Soft brush
Brooms and gunny bags
Sundries

Day
Day
Day
Day
litre
L.S.

0.13
0.13
0.21
0.05
2.34
5.33

260.00
1500.00
800.00
4000.00
41.29
1.49

each
each
L.S.
L.S.

0.13
0.40
7.15
8.97

20.00
18.00
1.49
1.49
Total:
19240.26

Add water charges @ 1% on

Add C.P & OH @15% on

19432.66
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 223.48
Rs 223.50

Item Code: 16.38.3

2.5 Cm thick bitumastic sheet with hot bitumen : With Refinary Modified bitumen CRMB 55 Conforming to IRC : SP 53-1999.

Code

7739
2914
2211
2342
2910
2911
2202
0370
2200

DSR-12

Details of Cost for : 100.00 Sqm

Description
Unit
Quantity
Modified Bitumen CRMB - 55 (Refinery produced) @56kg. per
cum. of aggregate and 128kg. per cum. of sand:
56xl.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg = 0.211 t
= 0.303 t
Solvent 0.070 kg. x 303 kg. = 21.21kg.
Carriage of bitumen
Carriage of solvent
Stone chippings 13.2mm nominal size
Stone chippings 11.2mm nominal size
Carriage of stone chippings
Steam coal
Carriage of steam coal

Tonne
kilog
tonne
quint
cum
cum
cum
quint
tonne

0.303
21.21
0.303
0.212
0.99
0.66
1.65
0.606
0.0661

Rate

38500.00
23.00
87.60
8.76
1050.00
1050.00
87.60
400.00
100.11

Page 678 of 2298

0982
2203

0128
0114
0115
0114

0130
0114
0113
0101
0003
0001
0023
1235
9999
0364
0365
9999
9999

Coarse sand
Carriage of sand
Labour for cleaning road surface, heating bitumen mixing and
spreading aggregate :
(a) For cleaning:
Mate
Beldar
Coolie
(b) For heating bitumen :
Beldar
(c) For cleaning, mixing and spreading pre-mix aggregate :

cum
cum

1.65
1.65

1120.00
87.60

Day
Day
Day

0.16
1.40
1.40

260.00
247.00
247.00

Day

1.19

247.00

Mistry
Beldar
(d) Consolidation charges:
Chowkidar (at barriers for night watch and for road roller)

Day
Day

0.24
6.12

301.00
247.00

Day

0.34

247.00

Bhishti
Hire charges for road roller
Hire charges for boiler
Hire charges of Bitumen Concrete Mixer
Diesel for road roller
Carriage of diesel
(e) Misc :
Wire brush (with thick wire)
Soft brush
Brooms and gunny bags
Sundries

Day
Day
Day
Day
litre
L.S.

0.13
0.13
0.21
0.05
2.34
5.33

260.00
1500.00
800.00
4000.00
41.29
1.49

each
each
L.S.
L.S.

0.13
0.40
7.15
8.97

20.00
18.00
1.49
1.49
Total:
19730.50

Add water charges @ 1% on

Add C.P & OH @15% on

19927.81
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 229.17
Rs 229.15

Item Code: 16.39.1

4 Cm thick bitumastic sheet with hot bitumen : With paving Asphalt 80/100 @ 70 grams/Kg of asphalt.
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Rate
Paving asphalt 80/100 @56kg. per cum. of aggregate and
128kg. per cum. of sand:
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
2916
= 0.479 t
tonne
0.479
37500.00
2914
Solvent 0.70kg.x479=33.53kg.
kilog
33.53
23.00
2342
Carriage of solvent
quint
0.335
8.76
2211
Carriage of bitumen
tonne
0.479
87.60
2910
Stone chippings 13.2mm nominal size
cum
1.56
1050.00
2911
Stone chippings 11.2mm nominal size
cum
1.04
1050.00
2202
Carriage of aggregate
cum
2.60
87.60
0982
Coarse sand
cum
2.60
1120.00
2203
Carriage of sand
cum
2.60
87.60
0370
Steam coal for heating bitumen @ 2 qunitals per tonne of quint
0.958
400.00
bitumen = 2x0.479=0.958q
2200
Carriage of steam coal
tonne
0.0958
100.11
Labour for cleaning road surface, heating bitumen mixing and
spreading aggregate :

DSR-12

Page 679 of 2298

0128
0114
0115
0114

0130
0114
0113
0101
0003
1235
0001
0023
9999
0364
0365
9999
9999

(a) For cleaning:

Mate
Beldar
Coolie
(b) For heating bitumen :
Beldar
(c) For cleaning, mixing and spreading pre-mix aggregate :
Mistry
Beldar
(d) Consolidation charges :
Chowkidar
Bhishti
Hire charges for road roller
Diesel for road roller @ 18 litres per day
Hire charges for boiler
Hire charges of Bitumen Concrete Mixer
Carriage of diesel
(e) Misc :
Wire brush (with thick wire)
Soft brush
Brooms and gunny bags
Sundries

Day
Day
Day

0.16
1.40
1.40

260.00
247.00
247.00

Day

1.88

247.00

Day
Day

0.31
9.46

301.00
247.00

Day
Day
Day
litre
Day
Day
L.S.

0.45
0.18
0.18
3.24
0.30
0.03
4.42

247.00
260.00
1500.00
41.29
800.00
4000.00
1.49

each
each
L.S.
L.S.

0.09
0.27
5.33
16.12

20.00
18.00
1.49
1.49
Total:
29863.32

Add water charges @ 1% on

Add C.P & OH @15% on

30161.95
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 346.86
Rs 346.85

Item Code: 16.39.2

4 Cm thick bitumastic sheet with hot bitumen : With paving Asphalt 60/70 with no solvent.
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Rate
Paving asphalt 60/70 @56kg. per cum. of aggregate and
128kg. per cum. of sand:
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
7309
= 0.479 t
tonne
0.479
38500.00
2211
Carriage of bitumen
tonne
0.479
87.60
2910
Stone chippings 13.2mm nominal size
cum
1.56
1050.00
2911
Stone chippings 11.2mm nominal size
cum
1.04
1050.00
2202
Carriage of aggregate
cum
2.60
87.60
0982
Coarse sand
cum
2.60
1120.00
2203
Carriage of sand
cum
2.60
87.60
0370
Steam coal for heating bitumen @ 2 qunitals per tonne of quint
0.958
400.00
bitumen =2x0.479=0.958 qtl.
2200
Carriage of steam coal
tonne
0.0958
100.11
Labour for cleaning road surface, heating bitumen mixing and
spreading aggregate :
(a) For cleaning:
0128
Mate
Day
0.16
260.00
0114
Beldar
Day
1.40
247.00
0115
Coolie
Day
1.40
247.00
(b) For heating bitumen :
0114
Beldar
Day
1.88
247.00

DSR-12

Page 680 of 2298

(c) For cleaning, mixing and spreading pre-mix aggregate :

0130
0114
0113
0101
0003
1235
0001
0023
9999
0364
0365
9999
9999

Mistry
Beldar
(d) Consolidation charges :
Chowkidar
Bhishti
Hire charges for road roller
Diesel for road roller @ 18 litres per day
Hire charges for boiler
Hire charges of Bitumen Concrete Mixer
Carriage of diesel
(e) Brushes etc. for cleaning :Wire brush (with thick wire)
Soft brush
Brooms and gunny bags
Sundries

Day
Day

0.31
9.46

301.00
247.00

Day
Day
Day
litre
Day
Day
L.S.

0.45
0.18
0.18
3.24
0.30
0.03
4.42

247.00
260.00
1500.00
41.29
800.00
4000.00
1.49

each
each
L.S.
L.S.

0.09
0.27
5.33
16.12

20.00
18.00
1.49
1.49
Total:
29568.20

Add water charges @ 1% on

Add C.P & OH @15% on

29863.88
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 343.43
Rs 345.45

Item Code: 16.39.3

4 Cm thick bitumastic sheet with hot bitumen : With Refinary Modified bitumen CRMB 55 Conforming to IRC : SP 53-1999.

Code

7739
2914
2342
2211
2910
2911
2202
0982
2203
0370
2200

0128
0114
0115
0114

0130

DSR-12

Details of Cost for : 100.00 Sqm

Description
Unit
Quantity
Modified Bitumen CRMB - 55 (Refinary produced) @56kg. per
cum. of aggregate and 128kg. per cum. of sand:
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
= 0.479 tonne
Solvent 0.70kg.x479=33.53kg.
Carriage of solvent
Carriage of bitumen
Stone chippings 13.2mm nominal size
Stone chippings 11.2mm nominal size
Carriage of aggregate
Coarse sand
Carriage of sand
Steam coal for heating bitumen @ 2 qunitals per tonne of
bitumen = 2x0.479=0.95 8q
Carriage of steam coal
Labour for cleaning road surface, heating bitumen mixing and
spreading aggregate :
(a) For cleaning:
Mate
Beldar
Coolie
(b) For heating bitumen :
Beldar
(c) For cleaning, mixing and spreading pre-mix aggregate :
Mistry

Rate

Tonne
kilog
quint
tonne
cum
cum
cum
cum
cum
quint

0.479
33.53
0.335
0.479
1.56
1.04
2.60
2.60
2.60
0.958

38500.00
23.00
8.76
87.60
1050.00
1050.00
87.60
1120.00
87.60
400.00

tonne

0.0958

100.11

Day
Day
Day

0.16
1.40
1.40

260.00
247.00
247.00

Day

1.88

247.00

Day

0.31

301.00

Page 681 of 2298

0114
0113
0101
0003
1235
0001
0023
9999
0364
0365
9999
9999

Beldar
(d) Consolidation charges :
Chowkidar
Bhishti
Hire charges for road roller
Diesel for road roller @ 18 litres per day
Hire charges for boiler
Hire charges of Bitumen Concrete Mixer
Carriage of diesel
(e) Misc:
Wire brush (with thick wire)
Soft brush
Brooms and gunny bags
Sundries

Day

9.46

247.00

Day
Day
Day
litre
Day
Day
L.S.

0.45
0.18
0.18
3.24
0.30
0.03
4.42

247.00
260.00
1500.00
41.29
800.00
4000.00
1.49

each
each
L.S.
L.S.

0.09
0.27
5.33
16.12

20.00
18.00
1.49
1.49
Total:
30342.32

Add water charges @ 1% on

Add C.P & OH @15% on

30645.74
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 352.43
Rs 352.45

Item Code: 16.40

P/L seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 Kg of grade
80/100 bitumen.
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Rate
2916
Bitumen @ 128kg/cum. of sand 128x0.60 =
tonne
0.0768
37500.00
76.80kg. = 0.0768 m.t.
2211
Carriage of bitumen
tonne
0.0768
87.60
0982
Fine aggregate (Coarse sand)
cum
0.60
1120.00
2203
Carriage of coarse sand
cum
0.60
87.60
0370
Steam coal for heating bitumen @ 2 qunitals
quint
1.536
400.00
per tonne of bitumen =2x0.768=0.1.536 qtl.
2200
Carriage of steam coal Labour for cleaning road surface, tonne
0.1536
100.11
heating bitumen mixing and spread
(a) For cleaning:
0128
Mate
Day
0.06
260.00
0114
Beldar
Day
0.49
247.00
0115
Coolie
Day
0.97
247.00
(b) For heating bitumen :
0114
Beldar-0.38/96x76.8
Day
0.30
247.00
(c) For cleaning, mixing and spreading pre-mix aggregate :
0114
0130
0113
0101
0003
0001
0023
1235
9999
0364
0365

DSR-12

Beldar-11.39/0.75x0.60
Mistry-0.06/0.75x0.60
(d) Miscellaneous :
Chowkidar (at barrier for night watch and for road roller)

Day
Day

1.11
0.05

247.00
301.00

Day

0.15

247.00

Bhishti
Hire charges for road roller
Hire charges for boiler
Hire charges of Bitumen Concrete Mixer
Diesel for road roller
Carriage of diesel
(e) Misc :
Wire brush (with thick wire)
Soft brush

Day
Day
Day
Day
litre
L.S.

0.06
0.06
0.05
0.01
1.08
0.26

260.00
1500.00
800.00
4000.00
41.29
1.49

each
each

0.05
0.12

20.00
18.00

Page 682 of 2298

9999

Sundries

L.S.

18.20

Add water charges @ 1% on

1.49
Total:
5278.52

Add C.P & OH @15% on

5331.31
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 61.31
Rs 61.30

Item Code: 16.41

P/L seal coat over prepared surface of road with bitumen heated in bitumen 80/100.
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Rate
2916
Bitumen 80/100
tonne
0.098
37500.00
2211
Carriage of bitumen
tonne
0.098
87.60
0298
Stone aggregate
cum
0.90
1100.00
2202
Carriage of stone aggregate
cum
0.90
87.60
0370
Steam coal for heating bitumen @ 2 qunitals per tonne of quint
1.96
400.00
bitumen =2x0.0.98=1.96 qtl.
2200
Carriage of steam coal
tonne
0.196
100.11
Labour for cleaning road surface, heating bitumen mixing and
spreading aggregate :
(a) For heating and spraying bitumen :
0130
Mistry
Day
0.04
301.00
0138
Sprayman
Day
0.06
260.00
0114
Beldar
Day
0.69
247.00
(b) For cleaning:
0128
Mate
Day
0.11
260.00
0114
Beldar
Day
1.40
247.00
0115
Coolie
Day
1.40
247.00
(c) For screening and spraying aggregate :
0128
Mate
Day
0.05
260.00
0114
Beldar
Day
0.51
247.00
(d) Misc :
0113
Chowkidar (at barrier for night watch and for road roller)
Day
0.15
247.00
0101
0003
0007
1235
0001
0364
0365
9999
9999

Bhishti
Hire charges for road roller
Hire charges for tar sprayer unit
Diesel for road roller @ 18 litres per day
Hire charges of boiler
(e) Misc :
Wire brush (with thick wire)
Soft brush
Sundries
Brooms and gunny bags

Day
Day
Day
litre
Day

0.06
0.06
0.06
1.08
0.06

260.00
1500.00
300.00
41.29
800.00

each
each
L.S.
L.S.

0.05
0.12
18.20
2.73

20.00
18.00
1.49
1.49
Total:
6900.87

Add water charges @ 1% on

Add C.P & OH @15% on

6969.88
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 80.15
Rs 80.15

Item Code: 16.42

C.C 1:2:4 in pavements laid to required slop and camber in panels etc.

DSR-12

Page 683 of 2298

Code

Details of Cost for : 1.00 Cum

Unit
Quantity

Description

Rate

MATERIALS:
Cement concrete 1:2:4 mix
0295
0293
0297
2206

Stone aggregate 20mm

Stone aggregate 40mm (One size)
Stone aggregate 10mm
Carraige of Stone aggregate 40 mm nominal size and above

cum
cum
cum
cum

2202
0982
2203
0367
2209

Carriage of 20mm aggregate

Coarse sand
Carriage of coarse sand
Cement
Carriage of cement
LABOUR:
Mason (avge)
Beldar
Bhisthi
Hire running charges of concrete mixer
Vibrator (Hire charges)
Sundries
Side shuttering :
Taking the slab to be 15cm thick and width to
be 6 metre, length of road 27 metre =
9.90/24.30

0155
0114
0101
0002
0012
9999

05.009.01
9999

0.22
0.52
0.11
0.52

1050.00
950.00
1050.00
95.22

cum
cum
cum
tonne
tonne

0.33
0.445
0.445
0.32
0.32

87.60
1120.00
87.60
5000.00
77.87

Day
Day
Day
Day
Day
L.S.

0.10
1.63
0.70
0.077
0.07
26.00

287.00
247.00
260.00
800.00
300.00
1.49

Centering & shuttering including strutting, propping etc. - Sqm

Foundations, footings, bases o
Sundries
L.S.

0.407

166.88

1.43

1.49
Total:
3818.00

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

3856.18
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4502.53
Rs 4502.55

Item Code: 16.43.1

P/L design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using coarse sand and graded stone aggregate of 40
mm nominal size - Cement concrete prepared with batch mixing machine

Code
0367
2209
0293
0295
0297
0982
2206
2202
2203

0114

DSR-12

Description
MATERIALS:
Portland Cement
Carraige of Cement
Stone Aggregate (Single size) : 40 mm nominal size
Stone Aggregate (Single size) : 20 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Coarse sand (zone III)
Carraige of Stone aggregate 40 mm nominal size and above
Carraige of Stone aggregate below 40 mm nominal size
Carraige of Coarse sand
LABOUR:
For mixing and laying :
Beldar

Details of Cost for : 1.00 Cum

Unit
Quantity

Rate

tonne
tonne
cum
cum
cum
cum
cum

0.34
0.34
0.52
0.22
0.11
0.445
0.52

5000.00
77.87
950.00
1050.00
1050.00
1120.00
95.22

cum
cum

0.33
0.445

87.60
87.60

Day

2.00

247.00

Page 684 of 2298

0101
0123
0124
0128
0155
0114
0004
0009

0021
0022
1235
1235
1235
1643-B
9999

Bhisti
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Mate
For compaction by vibrator
Mason (average)
Beldar
MACHINERY :
Production cost of concrete by batch mix plant.
Pumping charges of concrete including Hire charges of pump,
piping work & accessories etc.
Assuming 25 cum / day
Pin vibrator
Surface Vibrator (with 25 cum putput per day)
Fuel Charges:
Diesel oil (for mixer)
Diesel oil (for pin vibrator - 10 lt/day assumed)
Diesel oil For surface vibrator ( 5 lit/day assumed)
Add for steel form work :
ANNEXURE-B for item No. 16.43
STEEL FORM WORK:
Cutting and making joints

Day
Day
Day
Day

0.27
0.05
0.05
0.04

260.00
301.00
273.00
260.00

Day
Day

0.07
0.07

287.00
247.00

cum
cum

1.00
1.00

350.00
130.00

Day
Day

0.025
0.05

325.00
400.00

litre
litre
litre

1.20
0.25
0.25

41.29
41.29
41.29

Cum
L.S.

1.00
50.00

361.86
1.49
Total:
4838.14

Add water charges @ 1% on

Add C.P & OH @15% on

4886.52
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5619.50
Rs 5619.50

Item Code: 16.43.2

P/L design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using coarse sand and graded stone aggregate of 40
mm nominal size - Cement concrete manufactured in automatic batching_x000D_
plant (RMC plant) i/c transportation to site in transit

Code
0367
2209
0293
0295
0297
0982
2206
2202
2203

0114
0101
0123
0124
0128
0155
0114

DSR-12

Description
MATERIALS:
Portland Cement
Carraige of Cement
Stone Aggregate (Single size) : 40 mm nominal size
Stone Aggregate (Single size) : 20 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Coarse sand (zone III)
Carraige of Stone aggregate 40 mm nominal size and above
Carraige of Stone aggregate below 40 mm nominal size
Carraige of Coarse sand
LABOUR:
For mixing and laying :
Beldar
Bhisti
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Mate
For compaction by vibrator
Mason (average)
Beldar

Details of Cost for : 1.00 Cum

Unit
Quantity

Rate

tonne
tonne
cum
cum
cum
cum
cum

0.34
0.34
0.52
0.22
0.11
0.445
0.52

5000.00
77.87
950.00
1050.00
1050.00
1120.00
95.22

cum
cum

0.33
0.445

87.60
87.60

Day
Day
Day
Day
Day

2.00
0.27
0.05
0.05
0.04

247.00
260.00
301.00
273.00
260.00

Day
Day

0.07
0.07

287.00
247.00

Page 685 of 2298

0004
0029
0009

0021
0022
1235
1235
1235
1643-B
9999

MACHINERY :
Production cost of concrete by batch mix plant.
Carriage of concrete by transit mixer.
Pumping charges of concrete including Hire charges of pump,
piping work & accessories etc.
Assuming 25 cum / day
Pin vibrator
Surface Vibrator WITH 25 cum output per day
Fuel Charges:
Diesel oil (for mixer)
Diesel oil (for pin vibrator - 10 lt/day assumed)
Diesel oil For surface vibrator ( 5 lit/day assumed)
Add for steel form work :
ANNEXURE-B for item No. 16.43
STEEL FORM WORK:
Cutting and making joints

cum
km/ c
cum

1.00
10.00
1.00

350.00
30.00
130.00

Day
Day

0.025
0.05

325.00
400.00

litre
litre
litre

1.20
0.25
0.25

41.29
41.29
41.29

Cum
L.S.

1.00
50.00

361.86
1.49
Total:
5138.14

Add water charges @ 1% on

Add C.P & OH @15% on

5189.52
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5967.95
Rs 5967.95

Item Code: 16.44

Extra for providing and mixing hard crete of approved quality
Code
7254

Details of Cost for : 1.00 Ltr

Unit
Quantity

Description
MATERIALS:
Hardcrete (including cartage)

litre

Rate

1.00

37.00
Total:
37.00

Add water charges @ 1% on

Add C.P & OH @15% on

37.37
Cost for 1.00 Ltr
Rate per One Litre:
Rate as per DSR-12:

Rs 42.98
Rs 43.00

Item Code: 16.45

P/L pre moukded joints filler in expansion joints.
Code

0317

2211
0124
0114
9999

Description
Details of cost for 18mm thick 15cm deep and 300m in length
= 300x0.15 = 45 sqm.
18mm thick joint filler
Carriage of filler
45x0.018 =0.81 cum.
Weight 256.3kg. per cum. = 256.3x0.81
= 207.6kg.
= 0.21 tonne
Labour for fixing etc. :
Mason 2nd class
Beldar
Sundries

Details of Cost for : 8100.00 units

Unit
Quantity

sqm

tonne
Day
Day
L.S.

45.00

350.00

0.21

87.60

1.00
3.00
26.91

273.00
247.00
1.49
Total:
16822.50

Add water charges @ 1% on

DSR-12

Rate

Page 686 of 2298

Add C.P & OH @15% on

16990.73
Cost for 8100.00 units
Rate per Units:
Rate as per DSR-12:

Rs 2.41
Rs 2.40

Item Code: 16.46.1

P/L in position bitumen hot sealing compound for expansion joints etc. : P/L bitumen hot sealing comp- ound in expansion joints.

Code

0314
2211
0124
0114
9999

Description
Details of cost for 20mm wide 20mm deep and 300 metres in
length.
Sealing compound300x0.02x0.02 = 0.12cum.
Weight 256.3kg. per cum. = 256.3x0.12 = 30.76 kg.
Carriage of compound 30.76 = 0.3076 Say 0.03 tonne
Labour for filling:
Mason 2nd class
Beldar
Sundries

Details of Cost for : 1200.00 units

Unit
Quantity

Rate

kilog
tonne

30.76
0.03

26.00
87.60

Day
Day
L.S.

1.00
2.50
20.67

273.00
247.00
1.49
Total:
1723.69

Add water charges @ 1% on

Add C.P & OH @15% on

1740.93
Cost for 1200.00 units
Rate per Units:
Rate as per DSR-12:

Rs 1.67
Rs 1.65

Item Code: 16.47.1

Painting runway/taxi track/ apron marking with adequate No of coats togive uniform finish paint of superior make like Goodlas
Nerolac Brand 452/002: New work (Two or more coats).
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIAL:
1st Coat = 1.66 +
2nd Coat = 1.13
= 2.79
7256
Road marking paint
litre
2.79
170.00
9999
Carriage of paint
L.S.
5.07
1.49
LABOUR:
0131
Painter
Day
0.54
273.00
0114
Beldar
Day
0.54
247.00
9999
Sundries (including painting brush, wire brush, labour for L.S.
36.40
1.49
controlling traffic and other
Total:
Add water charges @ 1% on
816.89
Add C.P & OH @15% on
825.06
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 94.88
Rs 94.90

Item Code: 16.47.2

DSR-12

Page 687 of 2298

Painting runway/taxi track/ apron marking with adequate No of coats togive uniform finish paint of superior make like Goodlas
Nerolac Brand 452/002: Old work (one or more coats).
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIAL:
7256
Road marking paint
litre
1.66
170.00
9999
Carriage of paint
L.S.
1.12
1.49
LABOUR:
0131
Painter
Day
0.36
273.00
0114
Beldar
Day
0.36
247.00
9999
Sundries (including painting brush, wire
L.S.
24.44
1.49
brush, labour for controlling traffic and other T&P etc.)
Total:
Add water charges @ 1% on
507.49
Add C.P & OH @15% on
512.56
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 58.94
Rs 58.95

Item Code: 16.48.1

Painting road surface marking with adequate No. of coats to give uniform finish paint conforming to IS : 164,:- New work (Two or
more coats).
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIAL:
7255
Road marking paint (confirming to IS 164 spirit base)
litre
1.48
120.00
9999
Carriage of paint (1.48/0.80 0.08 6.9)
L.S.
2.65
1.49
LABOUR:
0128
Mate/Supervisor
Day
0.10
260.00
0131
Painter
Day
0.54
273.00
0114
Beldar for stretching of rope & errecting of barricading
Day
1.68
247.00
9999
Sundries (including painting brush, wire
L.S.
36.40
1.49
brush, labour for controlling traffic and other T&P etc.)
Total:
Add water charges @ 1% on
824.17
Add C.P & OH @15% on
832.41
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 95.73
Rs 95.75

Item Code: 16.48.2

Painting road surface marking with adequate No. of coats to give uniform finish paint conforming to IS : 164,:- Old work (One or
more coats).
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIAL:
7255
Road marking paint (confirming to IS 164 spirit base)
litre
0.89
120.00
9999
Carriage of Paint
L.S.
0.65
1.49
LABOUR:
0128
Mate/Supervisor
Day
0.06
260.00
0131
Painter 2nd class
Day
0.36
273.00
0114
Beldar (stretching of rope & errecting of barricading etc.)
Day
1.12
247.00
9999

DSR-12

Sundries (including painting brush, wire

L.S.

24.44

1.49

Page 688 of 2298

brush, labour for controlling traffic and other T&P etc.)

Add water charges @ 1% on

Total:
534.71

Add C.P & OH @15% on

540.06
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 62.11
Rs 62.10

Item Code: 16.49

Making bell mouth opening/ entrance of size 100x50x50 Cm for drainage pipe under foot path i/c providing CC 1:3:6 for shape of
bell mouth.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Rate
(i) Earth work in excavation
Channel:- 10x1x1.00x0.20x0.15=0.30+
Bell mouth 10x1x1.00x0.50x(0.18+0.075)/2= 0.64
02.008.01 E/W excavation in foundation trenches .. .. All kinds of soil.
0.94
130.78

04.001.08

04.001.05

05.003

05.022.01

DSR-12

(ii) Cement concrete 1:4:8

Channel :-10x1x1.00x0.20x0.075 = 0.15 cum.
P/L CC excluding centering - All work up to plinth level: 1:4:8 Coarse sand, 40mmstone a
(iii) Cement concrete 1:3:6
Channel
10x1x1.00x0.20x0.075 = 0.15 +
Bed of bell mouth :
10x1x1.00x0.50x(0.18+0.075)/2 = 0.64 +
Haunches portion
10x2x(0.35+0.075)/2x0.25x0.375 = 0.40 +
Rect part :10x2x0.35x0.25x0.375 = 0.65 +
Quadrant portion :10x 1 [(0.30x0.30)-3.142/4(0.30)^x0.30
=0.06+
Central middle part :10x1x0.30x0.25x0.075 = 0.05
Total = 1.95 cum.
P/L CC excluding centering - All work up to plinth level: 1:3:6 Coarse sand, 20mmstone a
(iv) RCC in shelves 1:2:4
10x1x1.00x0.50x0.05 =0.25cum.
RCC in beams, suspended floors, staircases, etc upto floor 5
level excldg centering, shutt
(v) Reinforcement for RCC @100kg/cum.
0.25x100=25kg.
Reinforcement for R.C.C. work all complete. -Upto plinth level
Mild steel and Medium Tensi
(vi) Centering and shuttering
For shelves (sides)
(X)10x2(1.00+0.50)x0.05= 1.50+
Front side of bell mouth :
(X)10x2(0.446)x0.375 = 3.34 +
Pipe portion:
10x*0.30x0.375-3.142/4(0.30) + = 0.04 +
Out side of bell mouth
= 10x(1.00/ 0.50)x0.45 = 9.00+
Deduct pipe opening

0.15

3593.30

1.95

4024.00

0.25

5494.55

25.00

56.77

Page 689 of 2298

05.009.01

13.016.01

13.018
0367
2209
0983
2261
0114
0101
9999
9999
0155
0115
0101
9999
9999

=10x0.785x0.30x0.30 = (-)0.71
= 13.17
Centering & shuttering including strutting, propping etc. Foundations, footings, bases o
(vii) cement plaster on RCC slab
10x1.00x0.50 = 5.00+
10x2(1.00+0.50)x0.05 = 1.50+
= 6.50 sqm.
6 mm CP of mix : 1:3 (1 cement: 3 fine sand)
(viii) Neat cement punning:
Qty. same as marked (x) at (vi) above
=3.34+0.04 = 3.38 sqm.
Channel portion:
10x1x(0.85+0.30)/2x0.25 = 1.43
Total = 4.81
Neat cement punning
Cement
tonne
Carriage of cement
tonne
Fine sand
cum
Carriage of fine sand
cum
Beldar
Day
Bhishti
Day
Hire charges of mixer
L.S.
Sundries
L.S.
LABOUR FOR PLASTER
Mason
Day
Coolie
Day
Bhishti
Day
Extra for removing burr
L.S.
Scaffolding
L.S.

13.17

166.88

6.50

101.02

4.81
0.024
0.024
0.05
0.05
0.035
0.003
1.27
1.27

31.12
5000.00
77.87
640.00
87.60
247.00
260.00
1.49
1.49

0.33
0.488
0.60
8.71
7.62

287.00
247.00
260.00
1.49
1.49
Total:
567.04

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

572.71
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 1496.44
Rs 1495.55

Item Code: 16.50

P/F Glow studs of size 100 x 20mm made of heavy duty body shall be moulded ASA/HIP/ ABS having electronically welded microprismatic lens Cat's Eye in accordance with ASTM D-280.
Details of Cost for : 15.00 Nos
Code
Description
Unit
Quantity
Rate
MATERIALS:
7426
Cats eye
each
15.00
180.00
9999
Carriage of Cat's eye
L.S.
2.60
1.49
LABOUR:
0124
Mason 2nd class
Day
0.50
273.00
0114
Beldar
Day
0.50
247.00
9999
Sundries (including material required for fixing cats eyes and L.S.
39.00
1.49
providing barricading to di
Total:
Add water charges @ 1% on
3021.98
Add C.P & OH @15% on
3052.20
Cost for 15.00 Nos
Rate per Each:

DSR-12

Rs 234.00

Page 690 of 2298

Rate as per DSR-12:

Rs 234.00

Item Code: 16.51.1

Preparation of sub-base road pavement with commercial dry lime (slaked), fly ash : Minimum thickness 15 cm.
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for 6.67 sqm. or 1 cum.
MATERIALS:
0777
slaked lime
quint
0.41
220.00
2208
Carraige of Lime
cum
0.068
87.60
1980
Flyash
cum
0.277
7.75
2267
Carriage of Flyash
cum
0.277
87.60
LABOUR:
(i)For earth work:
0114
Beldar
Day
0.116
247.00
0115
Coolie
Day
0.116
247.00
0979
Royalty for good earth
cum
0.655
30.00
2241
Carriage of good earth
cum
0.655
109.50
(ii) For mixing:
0114
Beldar
Day
0.025
247.00
0115
Coolie
Day
0.025
247.00
(iii) For rolling layers :
0113
Chowkidar
Day
0.0008
247.00
0003
Hire charges of roller
Day
0.0008
1500.00
1235
Diesel for road roller
litre
0.0144
41.29
2342
Carriage of diesel
quint
0.0002
8.76
9999
Sundries
L.S.
0.18
1.49
(iv) Labour for spreading and watering :
0114
Beldar
Day
0.26
247.00
0115
Coolie
Day
0.26
247.00
0101
Bhishti
Day
0.18
260.00
Total:
Add water charges @ 1% on
461.11
Add C.P & OH @15% on
465.72
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 535.58
Rs 535.60

Item Code: 16.52

P/F precast lime fly ash concrete blocks 1 : 2 : 3 : 6 i/c finishing with CM 1 : 3.
Details of Cost for : 0.90 Cum
Code
Description
Unit
Quantity
Details of cost for a path of area 10.00 sqm. no. of
blocks required for 10.00 sqm. = 108 nos.
(a) Concrete in blocks
(108x0.30x0.30x0.09 = 0.875 cum.)
16.052.Y
Sub-Analysis - Y for Item 16.52
0.875
(b) Labour for Surface excavation .
0114
Beldar
Day
0.72
0115
Coolie
Day
0.60
(c) For levelling course of fine sand
6501
Jamuna sand
cum
0.10
2335
Carriage of Jamuna sand
cum
0.10
Labour:
0114
Beldar
Day
0.0089
0115
Coolie
Day
0.0107

DSR-12

Rate

2242.16
247.00
247.00
500.00
87.60
247.00
247.00

Page 691 of 2298

0101
03.008
0155
0115
0101
9999

6501
2335
0123
0115
0101

Bhishti
(d) For finishing with 10mm thick cement plaster
Cement mortar 1:3 (1 cement : 3 coarse sand)
Cement: 3 Coarse sand)
Mason
Coolie
Bhishti
Scaffolding and sundries
(e) For laying blocks and filling joints with
Jamuna sand for filling joints 5mm (av.) thick
Fine sand (Jamuna)
Carriage of fine sand
Mason 2nd class
Coolie
Bhishti

Day

0.0035

260.00

Cum

0.0972

4145.53

Day
Day
Day
L.S.

0.787
0.787
0.262
12.22

287.00
247.00
260.00
1.49

cum
cum
Day
Day
Day

0.005
0.005
0.90
1.98
0.05

500.00
87.60
301.00
247.00
260.00
Total:
4037.88

Add water charges @ 1% on

Add C.P & OH @15% on

4078.26
Cost for 0.90 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5211.11
Rs 5211.10

Item Code: 16.53

P/F concertina coil fencing with required dia. 610 mm (having 15 nos. round/ meter length) upto 3.0 m height of wall with existing
angle iron 'Y' shaped with 9 horizontal R.B.T. stud tied with G.I. staples and G.I clips.

Code
8691
8692

8693
9999

0114
0102
0103

Details of Cost for : 30.00 m

Unit
Quantity

Description
MATERIALS :
Punched tape concertina coil 600 m dia. 10m openable length
(Total length 90m)
R.B.T. Reinforced Barbed Tape
9 rounds
9x30 = 270m
Turn buckle and strengthening bolt.
G.I. staples clips etc.
LABOUR
Labour for fixing straightening cutting of tape/ coils & wire
Beldar 0.50x2 = 1.00 Nos (Taken double due to height)
Blacksmith 1st class
Blacksmith 2nd class

Rate

bundl

5.00

730.00

metre

270.00

8.50

each
L.S.

10.00
49.40

40.00
1.49

Day
Day
Day

1.00
0.50
0.50

247.00
301.00
273.00
Total:
6952.61

Add water charges @ 1% on

Add C.P & OH @15% on

7022.14
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 269.18
Rs 269.20

Item Code: 16.54.1

P/L Dense Bituminous macadam on prepared surface with specified crushed stone agg. for profile corrective base/ binding course
i/c loading, tansporting to site, laying with paver finisher and rolling with RR: 50/ 75 mm average compacted thickness ..
Details of Cost for : 195.00 Cum

DSR-12

Page 692 of 2298

Code

7309
2211

0294
0297
0297
0298
2903
2202
0777

2208
0062
0063
0064
0069
0052
0053
0053

0055
0054

0056
0128
0114

0139

Description
Details of cost for 195 CUM (or 450 tonnes)
(A) MATERIALS
Paving Asphalt of grade VG-30 of approved quality
(percentage by weight of total mix)
Carraige of Tar bitumen
Aggregate :
Total weight of mix = 450 tonnes
Weight of bitumen = 22.50 tonnes
Weight of aggregate = 450 - 22.50 = 427.50 tonnes
Taking density of aggregate as 1.50 tonnes/ cum
Volume of aggregate = 427.50 / 1.5 = 285 cum
Grading - II / 19mm (Nominal size)
25 - 10mm size - 30% of 285 = 85.50 cum
10 - 5mm size = 28% of 285 = 79.80 cum
5mm and below = 40% of 285 =114 cum

Unit

Stone Aggregate 25mm size (single size)

Qty = 85.50 x 50 / 100
Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 06 mm nominal size
Qty = 79.8 x 50 /100
Stone chippings/ screenings 4.75 mm nominal size
Carraige of Stone aggregate below 40 mm nominal size
Dry hydrated lime (factory made)
Lime filter @ 2% (percentage by weight of aggregate)
Lime filter @ 2% (percentage by weight of aggregate)
Carraige of Lime
(B) MACHINERY
Hot mix Plant -120 TPH capacity
Hot mix Plant 100 TPH Capacity
Paver finisher Hydrostatic with sensor control 100 TPH
Generator 250 kVA
Front end loader 1 cum bucket capacity (incl POL)
Tipper -5 Cum
Add 10% of cost of carriage to cover cost of loading and
unloading
( Qty of 10% on 4500 i
Smooth Wheeled Roller 8 to 10 tonne
For initial break down rolling (6 x 0.65)
Vibratory roller 8 to 10 tonne
For intermediate rolling (6 x 0.65)
Finish rolling with 6-8 tonnes smooth wheeled tandem roller
(6 x 0.65)
Tandem Road Roller
(C) LABOUR
Mate
Beldar
Working with HMP, mechanical broom, paver, roller, ashpalt
cutter and assistance for setting out lines, levels and layout of
construction
Skilled Beldar (for floor rubbing etc.)
for checking line & level

Quantity

Rate

tonne
tonne

22.50
22.50

38500.00
87.60

cum
cum
cum

42.75
42.75
39.90

1000.00
1050.00
1050.00

cum
cum
cum
quint

39.90
114.00
279.30
85.50

1100.00
1150.00
87.60
220.00

6.63

87.60

hours
Hours
hours
hours
Hours
tonne

3.00
3.00
6.00
6.00
6.00
4500.00

23700.00
17500.00
2700.00
900.00
800.00
3.00

tonne

450.00

3.00

Hours

3.90

460.00

Hours

3.90

1550.00

Hours

3.90

1150.00

Day
Day

0.84
14.00

260.00
247.00

Day

5.00

260.00
Total:
1398751.37

cum

Add water charges @ 1% on

Add C.P & OH @15% on 1412738.88

Cost for 195.00 Cum

DSR-12

Page 693 of 2298

Rate per One Cum:

Rate as per DSR-12:

Rs 8331.54
Rs 8331.55

Item Code: 16.54.2

P/L Dense Bituminous macadam, base/ binding course i/c loading, tansporting to site, laying with paver finisher and rolling with RR:
50 to 100 mm average compacted thickness with bitumen of grade VG-30 @5% percentage by weight of total mix) and lime fill

Code

7309
2211

0294
0297
0297
0298
2903
2202
0777
2208
0076
0064
0069
0052
0053
0053

0055
0054

0056
0128
0114

DSR-12

Description
(A) MATERIALS
Details of cost for 195 CUM (or 450 tonnes)
Paving Asphalt of grade VG-30 of approved quality
(percentage by weight of total mix)
Carraige of Tar bitumen
Aggregate :
Total weight of mix = 450 tonnes
Weight of bitumen = 22.50 tonnes
Weight of aggregate = 450 - 22.50 = 427.50 tonnes
Taking density of aggregate as 1.50 tonnes/ cum
Volume of aggregate = 427.50 / 1.5 = 285 cum
Grading - II / 19mm (Nominal size)
25 - 10mm size - 30% of 285 = 85.50 cum
10 - 5mm size = 28% of 285 = 79.80 cum
5mm and below = 40% of 285 =114 cum
Stone Aggregate 25mm size (single size)
Qty = 85.50 x 50 / 100
Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 06 mm nominal size
Qty = 79.8 x 50 /100
Stone chippings/ screenings 4.75 mm nominal size
Carraige of Stone aggregate below 40 mm nominal size
Dry hydrated lime (factory made)
Lime filter @ 2% (percentage by weight of aggregate)
Carraige of Lime
(B) MACHINERY
Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour
actual output
Paver finisher Hydrostatic with sensor control 100 TPH
Generator 250 kVA
Front end loader 1 cum bucket capacity (incl POL)
Tipper -5 Cum
Add 10% of cost of carriage to cover cost of loading and
unloading
( Qty of 10% on 4500 i
Smooth Wheeled Roller 8 to 10 tonne
For initial break down rolling (6 x 0.65)
Vibratory roller 8 to 10 tonne
For intermediate rolling (6 x 0.65)
Finish rolling with 6-8 tonnes smooth wheeled tandem roller
(6 x 0.65)
Tandem Road Roller
(C) LABOUR
Mate
Beldar

Details of Cost for : 195.00 Cum

Unit
Quantity

Rate

tonne
tonne

22.50
22.50

38500.00
87.60

cum
cum
cum

42.75
42.75
39.90

1000.00
1050.00
1050.00

cum
cum
cum
quint

39.90
114.00
279.30
85.50

1100.00
1150.00
87.60
220.00

cum

6.63

87.60

hour

6.00

14000.00

hours
hours
Hours
tonne

6.00
6.00
6.00
4500.00

2700.00
900.00
800.00
3.00

tonne

450.00

3.00

Hours

3.90

460.00

Hours

3.90

1550.00

Hours

3.90

1150.00

0.84
14.00

260.00
247.00

Day
Day

Page 694 of 2298

0139

Working with HMP, mechanical broom, paver, roller, ashpalt

cutter and assistance for setting out lines, levels and layout of
construction
Skilled Beldar (for floor rubbing etc.)
for checking line & level
Day

5.00

Add water charges @ 1% on

260.00
Total:
1359151.37

Add C.P & OH @15% on 1372742.88

Cost for 195.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 8095.66
Rs 8095.65

Item Code: 16.55.1

P/L Bituminous macadam on prepared surface with specified crushed stone agg. for profile corrective base/ binding course i/c
loading, tansporting to site, laying with paver finisher and rolling with RR: 50/ 75 mm ave. compacted thickness with bitumen of

Code

7309
2211

0294
0297
0297
0298
2903
2202
0062
0063
0064
0069
0052
0053
0053

0055
0054

DSR-12

Description
Details of cost for 205 cum (450 tonnes)
MATERIALS:
Paving Asphalt of grade VG-30 of approved quality
Carraige of Tar bitumen
Aggregate :
Total weight of mix = 450 tonnes
Weight of bitumen = 15.75 tonnes
Weight of aggregate = 450 - 15.75 = 434.25 tonnes
Taking density of aggregate as 1.50 tonnes/ cum
Volume of aggregate = 434.25 / 1.5 = 289.50 cum
Grading - II / 19mm (Nominal size)
25 - 10mm size - 40% of 289.50 = 115.80 cum
10 - 5mm size = 40% of 289.50 = 115.80 cum
5mm and below = 20% of 289.50 = 57.90 cum
Stone Aggregate (Single size) : 25 mm nominal size
Qty = 115.80 x 50 /100
Stone Aggregate (Single size) : 10 mm nominal size
Qty = 115.80 x 50 /100
Stone Aggregate (Single size) : 10 mm nominal size
Qty = 115.80 x 50 /100
Stone Aggregate (Single size) : 06 mm nominal size
Qty = 115.80 x 50 /100
Stone chippings/ screenings 4.75 mm nominal size
Carraige of Stone aggregate below 40 mm nominal size
(B) MACHINERY
Hot mix Plant -120 TPH capacity
Hot mix Plant 100 TPH Capacity
Paver finisher Hydrostatic with sensor control 100 TPH
Generator 250 kVA
Front end loader 1 cum bucket capacity (incl POL)
Tipper -5 Cum
Add 10% on cost of carriage to cover cost of loading and
unloading
(Qty taken as 10% of 4
Smooth Wheeled Roller 8 to 10 tonne
Vibratory roller 8 to 10 tonne
Finish rolling with 6-8 tonnes smooth wheeled tandem roller
(6 x 0.65)

Details of Cost for : 205.00 Cum

Unit
Quantity

Rate

tonne
tonne

15.75
15.75

38500.00
87.60

cum

57.90

1000.00

cum

57.90

1050.00

cum

57.90

1050.00

cum
cum
cum

57.90
57.90
289.50

1100.00
1150.00
87.60

hours
Hours
hours
hours
Hours
tonne

3.00
3.00
6.00
6.00
6.00
4500.00

23700.00
17500.00
2700.00
900.00
800.00
3.00

tonne
Hours
Hours

450.00
3.90
3.90

3.00
460.00
1550.00

Page 695 of 2298

0056
0128
0114

0139

Tandem Road Roller

(C) LABOUR:
Mate
Beldar
Working with HMP, mechanical broom, paver, roller, ashpalt
cutter and assistance for setting out lines, levels and layout of
construction
Skilled Beldar
for checking line & levels

Hours

3.90

1150.00

Day
Day

0.84
14.00

260.00
247.00

Day

5.00

260.00

Add water charges @ 1% on

Total:
1125030.30

Add C.P & OH @15% on 1136280.60

Cost for 205.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 6374.26
Rs 6374.25

Item Code: 16.55.2

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder ..
.. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @3.50% (percentage by weight of total mix) prepared i

Code

7309
2211

0294
0297
0297
0298
2903
2202
0076
0064
0069
0052
0053
0053

DSR-12

Description
Details of cost for 205 cum (450 tonnes)
MATERIALS:
Paving Asphalt of grade VG-30 of approved quality
Carraige of Tar bitumen
Aggregate :
Total weight of mix = 450 tonnes
Weight of bitumen = 15.75 tonnes
Weight of aggregate = 450 - 15.75 = 434.25 tonnes
Taking density of aggregate as 1.50 tonnes/ cum
Volume of aggregate = 434.25 / 1.5 = 289.50 cum
Grading - II / 19mm (Nominal size)
25 - 10mm size - 40% of 289.50 = 115.80 cum
10 - 5mm size = 40% of 289.50 = 115.80 cum
5mm and below = 20% of 289.50 = 57.90 cum
Stone Aggregate (Single size) : 25 mm nominal size
Qty = 115.80 x 50 /100
Stone Aggregate (Single size) : 10 mm nominal size
Qty = 115.80 x 50 /100
Stone Aggregate (Single size) : 10 mm nominal size
Qty = 115.80 x 50 /100
Stone Aggregate (Single size) : 06 mm nominal size
Qty = 115.80 x 50 /100
Stone chippings/ screenings 4.75 mm nominal size
Carraige of Stone aggregate below 40 mm nominal size
(B) MACHINERY
Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour
actual output
Paver finisher Hydrostatic with sensor control 100 TPH
Generator 250 kVA
Front end loader 1 cum bucket capacity (incl POL)
Tipper -5 Cum
Add 10% on cost of carriage to cover cost of loading and
unloading
(Qty taken as 10% of 4

Details of Cost for : 205.00 Cum

Unit
Quantity

Rate

tonne
tonne

15.75
15.75

38500.00
87.60

cum

57.90

1000.00

cum

57.90

1050.00

cum

57.90

1050.00

cum
cum
cum

57.90
57.90
289.50

1100.00
1150.00
87.60

hour

6.00

14000.00

hours
hours
Hours
tonne

6.00
6.00
6.00
4500.00

2700.00
900.00
800.00
3.00

tonne

450.00

3.00

Page 696 of 2298

0055
0054

0056

0128
0114
0139

Smooth Wheeled Roller 8 to 10 tonne

Vibratory roller 8 to 10 tonne
Finish rolling with 6-8 tonnes smooth wheeled tandem roller
(6 x 0.65)
Tandem Road Roller
(C) LABOUR:
Working with HMP, mechanical broom, paver, roller, ashpalt
cutter and assistance for setting out lines, levels and layout of
construction
for checking line & levels
Mate
Beldar
Skilled Beldar

Hours
Hours

3.90
3.90

460.00
1550.00

Hours

3.90

1150.00

0.84
14.00
5.00

260.00
247.00
260.00
Total:
1085430.30

Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on 1096284.60

Cost for 205.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 6149.89
Rs 6149.90

Item Code: 16.56.1

P/L Semi Dense Bituminous concrete : 25mm compacted thickness with bitumen grade of VG -30 @ 5% .. ..
Details of Cost for : 7800.00 Sqm
Code
Description
Unit
Quantity
Details of cost for 195 cum ( 450 tonnes) Area covered for
25mm thickness = 7800 sqm

7309
2211

0296
0297
2903
2202
0777
2208
0062
0063
0064
0069
0052
0053
0053
0055

DSR-12

(A) MATERIAL:
Paving Asphalt of grade VG-30 of approved quality
Carraige of Tar bitumen
Aggregate :
Total weight of mix = 450 tonnes
Weight of bitumen = 22.50 tonnes
Weight of aggregate = 450 - 22.50 = 427.50 tonnes
Taking density of aggregate as 1.50 tonnes/ cum
Volume of aggregate = 427.50 / 1.5 = 285 cum
Grading - II / 19mm (Nominal size)
9.5 - 4.75mm size - 57% of 285 = 162.45cum
4.75mm and below = 41% of 285 =116.85 cum
Stone Aggregate (Single size) : 12.5 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Carraige of Stone aggregate below 40 mm nominal size
Lime filter @ 2% (percentage by weight of aggregate)
Dry hydrated lime (factory made)
Carraige of Lime
(B) MACHINERY
Hot mix Plant -120 TPH capacity
Hot mix Plant 100 TPH Capacity
Paver finisher Hydrostatic with sensor control 100 TPH
Generator 250 kVA
Front end loader 1 cum bucket capacity (incl POL)
Tipper -5 Cum
Add 10% on cost of carraige to cover the cost of loading and
unloading (hence 10% qty of a
Smooth Wheeled Roller 8 to 10 tonne

tonne
tonne

Rate

22.50
22.50

38500.00
87.60

cum
cum
cum
cum

81.225
81.225
116.85
279.30

1050.00
1050.00
1150.00
87.60

quint
cum

85.50
6.63

220.00
87.60

hours
Hours
hours
hours
Hours
tonne
tonne

3.00
3.00
6.00
6.00
6.00
4500.00
450.00

23700.00
17500.00
2700.00
900.00
800.00
3.00
3.00

Hours

3.90

460.00

Page 697 of 2298

0054

0056
0128
0114

Vibratory roller 8 to 10 tonne

Finish rolling with 8-10 tonne smooth wheeled tandem roller
(6x0.65)
Tandem Road Roller
(C) LABOUR
Mate
Beldar
Working with HMP, mechanical broom, paver, roller, ashpalt
cutter and assistance for setting out lines, levels and layout of
construction

Hours

3.90

1550.00

Hours

3.90

1150.00

0.84
14.00

260.00
247.00

Add water charges @ 1% on

Total:
1397878.87

Day
Day

Add C.P & OH @15% on 1411857.66

Cost for 7800.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 208.16
Rs 208.15

Item Code: 16.56.2

P/L Semi Dense Bituminous concrete : 25 mm compacted thickness with bitumen of grade VG- 30 @5% (percentage by weight of
total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.

Code

7309
2211

0296
0297
2903
2202
0777
2208
0076
0064
0069
0052
0053
0053
0055
0054

DSR-12

Details of Cost for : 7800.00 Sqm

Description
Unit
Quantity
Details of cost for 195 cum ( 450 tonnes) Area covered for
25mm thickness = 7800 sqm
(A) MATERIAL:
Paving Asphalt of grade VG-30 of approved quality
Carraige of Tar bitumen
Aggregate :
Total weight of mix = 450 tonnes
Weight of bitumen = 22.50 tonnes
Weight of aggregate = 450 - 22.50 = 427.50 tonnes
Taking density of aggregate as 1.50 tonnes/ cum
Volume of aggregate = 427.50 / 1.5 = 285 cum
Grading - II / 19mm (Nominal size)
9.5 - 4.75mm size - 57% of 285 = 162.45cum
4.75mm and below = 41% of 285 =116.85 cum
Stone Aggregate (Single size) : 12.5 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Carraige of Stone aggregate below 40 mm nominal size
Lime filter @ 2% (percentage by weight of aggregate)
Dry hydrated lime (factory made)
Carraige of Lime
(B) MACHINERY
Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour
actual output
Paver finisher Hydrostatic with sensor control 100 TPH
Generator 250 kVA
Front end loader 1 cum bucket capacity (incl POL)
Tipper -5 Cum
Add 10% on cost of carraige to cover the cost of loading and
unloading (hence 10% qty of a
Smooth Wheeled Roller 8 to 10 tonne
Vibratory roller 8 to 10 tonne

tonne
tonne

Rate

22.50
22.50

38500.00
87.60

cum
cum
cum
cum

81.225
81.225
116.85
279.30

1050.00
1050.00
1150.00
87.60

quint
cum

85.50
6.63

220.00
87.60

hour

6.00

14000.00

hours
hours
Hours
tonne
tonne

6.00
6.00
6.00
4500.00
450.00

2700.00
900.00
800.00
3.00
3.00

Hours
Hours

3.90
3.90

460.00
1550.00

Page 698 of 2298

0056

0128
0114

Finish rolling with 8-10 tonne smooth wheeled tandem roller

(6x0.65)
Tandem Road Roller
Hours
(C) LABOUR
Working with HMP, mechanical broom, paver, roller, ashpalt
cutter and assistance for setting out lines, levels and layout of
construction
Mate
Day
Beldar
Day

3.90

1150.00

0.84
14.00

260.00
247.00
Total:
1358278.87

Add water charges @ 1% on

Add C.P & OH @15% on 1371861.66

Cost for 7800.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 202.26
Rs 202.25

Item Code: 16.57.1

P/L Dense Bituminous concrete on prepared surface with specified graded stone agg. for wearing course, loading, tansporting to
site, laying with paver finisher and rolling with RR: 40/50 mm compacted thickness with bitumen grade CRMB-60 @ 5.5% by weight

Code

7309
2211

0296
0297
0297
0298
2903
2202
0777
2208

0062
0063
0064
0069
0052
0053

DSR-12

Description
Details of cost for 191 cum (450 tonnes)
(A) MATERIAL
Paving Asphalt of grade VG-30 of approved quality
Carraige of Tar bitumen
Aggregate :
Total weight of mix = 450 tonnes
Weight of bitumen = 24.75 tonnes
Weight of aggregate = 450 - 24.75 = 425.25 tonnes
Taking density of aggregate as 1.50 tonnes/ cum
Volume of aggregate = 425.25 / 1.5 = 283.50 cum
Grading - II / 19mm (Nominal size)
13.2 - 10mm size - 30% of 283.5 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 =119.07 cum
Stone Aggregate (Single size) : 12.5 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 06 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Carraige of Stone aggregate below 40 mm nominal size
Lime filter @ 3% (percentage by weight of aggregate)
Dry hydrated lime (factory made)
Carraige of Lime
(Considering density of lime as 1.29 MT / Cum
Volume = 12.758 /
(B) MACHINERY
Hot mix Plant -120 TPH capacity
Hot mix Plant 100 TPH Capacity
Paver finisher Hydrostatic with sensor control 100 TPH
Generator 250 kVA
Front end loader 1 cum bucket capacity (incl POL)
Tipper -5 Cum

Details of Cost for : 191.00 Cum

Unit
Quantity

tonne
tonne

Rate

24.75
24.75

38500.00
87.60

cum
cum
cum
cum
cum
cum

42.525
42.525
35.44
35.44
119.07
275.00

1050.00
1050.00
1050.00
1100.00
1150.00
87.60

quint

127.60

220.00

9.89

87.60

3.00
3.00
6.00
6.00
6.00
4500.00

23700.00
17500.00
2700.00
900.00
800.00
3.00

cum
hours
Hours
hours
hours
Hours
tonne

Page 699 of 2298

0053
0055
0054

0056
0128
0114

0139

Add 10% on cost of carraige to cover the cost of loading and

unloading on above item - Qty
Smooth Wheeled Roller 8 to 10 tonne
Vibratory roller 8 to 10 tonne
Finish rolling with 6-8 tonne smooth wheeled tandem roller
(6x0.65)
Tandem Road Roller
(C) LABOUR
Mate
Beldar
Working with HMP, mechanical broom, paver, roller, ashpalt
cutter and assistance for setting out lines, levels and layout of
construction
Skilled Beldar for checking line & levels

tonne

450.00

3.00

Hours
Hours

3.90
3.90

460.00
1550.00

Hours

3.90

1150.00

Day
Day

0.84
14.00

260.00
247.00

Day

5.00

260.00
Total:
1492650.86

Add water charges @ 1% on

Add C.P & OH @15% on 1507577.37

Cost for 191.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 9077.04
Rs 9077.05

Item Code: 16.57.2

P/L Dense Bituminous concrete :40/50 mm compacted thickness with bitumen of grade VG-30 @5.5% (percentage by weight of
total mix) and lime filler @ 3% (percentage by weight of Aggregate) and waste plastic additive @8% (percentage by weight of
bitumen
Details of Cost for : 191.00 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for 191 cum (450 tonnes)
(A) MATERIAL
7309
Paving Asphalt of grade VG-30 of approved quality
tonne
24.75
38500.00
2211
Carraige of Tar bitumen
tonne
24.75
87.60
Aggregate :
Total weight of mix = 450 tonnes
Weight of bitumen = 24.75 tonnes
Weight of aggregate = 450 - 24.75 = 425.25 tonnes
Taking density of aggregate as 1.50 tonnes/ cum
Volume of aggregate = 425.25 / 1.5 = 283.50 cum
Grading - II / 19mm (Nominal size)
13.2 - 10mm size - 30% of 283.5 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 =119.07 cum
Wate plastic @ 8% of the weight of bitumen i.e 24.75x8%
7280
0296
0297
0297
0298
2903
2202
0777
2208

DSR-12

Waste plastic additive

Stone Aggregate (Single size) : 12.5 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 06 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Carraige of Stone aggregate below 40 mm nominal size
Lime filter @ 3% (percentage by weight of aggregate)
Dry hydrated lime (factory made)
Carraige of Lime
(Considering density of lime as 1.29 MT / Cum
Volume = 12.758 /
(B) MACHINERY

MT
cum
cum
cum
cum
cum
cum

1.98
42.525
42.525
35.44
35.44
119.07
275.00

40000.00
1050.00
1050.00
1050.00
1100.00
1150.00
87.60

quint

127.60

220.00

9.89

87.60

cum

Page 700 of 2298

0062
0063
0064
0069
0052
0053
0053
0055
0054

0056
0128
0114

0139

Hot mix Plant -120 TPH capacity

Hot mix Plant 100 TPH Capacity
Paver finisher Hydrostatic with sensor control 100 TPH
Generator 250 kVA
Front end loader 1 cum bucket capacity (incl POL)
Tipper -5 Cum
Add 10% on cost of carraige to cover the cost of loading and
unloading on above item - Qty
Smooth Wheeled Roller 8 to 10 tonne
Vibratory roller 8 to 10 tonne
Finish rolling with 6-8 tonne smooth wheeled tandem roller
(6x0.65)
Tandem Road Roller
(C) LABOUR
Mate
Beldar
Working with HMP, mechanical broom, paver, roller, ashpalt
cutter and assistance for setting out lines, levels and layout of
construction
Skilled Beldar for checking line & levels

hours
Hours
hours
hours
Hours
tonne
tonne

3.00
3.00
6.00
6.00
6.00
4500.00
450.00

23700.00
17500.00
2700.00
900.00
800.00
3.00
3.00

Hours
Hours

3.90
3.90

460.00
1550.00

Hours

3.90

1150.00

Day
Day

0.84
14.00

260.00
247.00

Day

5.00

260.00
Total:
1571850.86

Add water charges @ 1% on

Add C.P & OH @15% on 1587569.37

Cost for 191.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 9558.66
Rs 9558.65

Item Code: 16.57.3

P/L Dense Bituminous concrete :40/50 mm compacted thickness with bitumen of grade PMB-40 @5.5% and lime filler @ 3%
prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
Details of Cost for : 191.00 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for 191 cum (450 tonnes)
(A) MATERIAL
0312
Bitumen grade PMB - 40
M.T.
24.75
41400.00
2211
Carraige of Tar bitumen
tonne
24.75
87.60
Aggregate :
Total weight of mix = 450 tonnes
Weight of bitumen = 24.75 tonnes
Weight of aggregate = 450 - 24.75 = 425.25 tonnes
Taking density of aggregate as 1.50 tonnes/ cum
Volume of aggregate = 425.25 / 1.5 = 283.50 cum
Grading - II / 19mm (Nominal size)
13.2 - 10mm size - 30% of 283.5 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 =119.07 cum
0296
0297
0297
0298
2903
2202
0777
2208

DSR-12

Stone Aggregate (Single size) : 12.5 mm nominal size

Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 06 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Carraige of Stone aggregate below 40 mm nominal size
Lime filter @ 3% (percentage by weight of aggregate)
Dry hydrated lime (factory made)
Carraige of Lime
(Considering density of lime as 1.29 MT / Cum

cum
cum
cum
cum
cum
cum

42.525
42.525
35.44
35.44
119.07
275.00

1050.00
1050.00
1050.00
1100.00
1150.00
87.60

quint

127.60

220.00

Page 701 of 2298

0062
0063
0064
0069
0052
0053
0053
0055
0054

0056
0128
0114

0139

Volume = 12.758 /
(B) MACHINERY
Hot mix Plant -120 TPH capacity
Hot mix Plant 100 TPH Capacity
Paver finisher Hydrostatic with sensor control 100 TPH
Generator 250 kVA
Front end loader 1 cum bucket capacity (incl POL)
Tipper -5 Cum
Add 10% on cost of carraige to cover the cost of loading and
unloading on above item - Qty
Smooth Wheeled Roller 8 to 10 tonne
Vibratory roller 8 to 10 tonne
Finish rolling with 6-8 tonne smooth wheeled tandem roller
(6x0.65)
Tandem Road Roller
(C) LABOUR
Mate
Beldar
Working with HMP, mechanical broom, paver, roller, ashpalt
cutter and assistance for setting out lines, levels and layout of
construction
Skilled Beldar for checking line & levels

cum

9.89

87.60

hours
Hours
hours
hours
Hours
tonne
tonne

3.00
3.00
6.00
6.00
6.00
4500.00
450.00

23700.00
17500.00
2700.00
900.00
800.00
3.00
3.00

Hours
Hours

3.90
3.90

460.00
1550.00

Hours

3.90

1150.00

Day
Day

0.84
14.00

260.00
247.00

Day

5.00

260.00
Total:
1564425.86

Add water charges @ 1% on

Add C.P & OH @15% on 1580070.12

Cost for 191.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 9513.51
Rs 9513.50

Item Code: 16.57.4

P/L Dense Bituminous concrete :40/50 mmwith bitumen of grade CRMB-60 @5.5% and lime filler @ 3% prepared in Batch Type Hot
Mix Plant of 100-120 TPH capacity.
Details of Cost for : 191.00 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for 191 cum (450 tonnes)
(A) MATERIAL
7741
Modified Bitumen Refinery produced CRMB - 60
tonne
24.75
38800.00
2211
Carraige of Tar bitumen
tonne
24.75
87.60
Aggregate :
Total weight of mix = 450 tonnes
Weight of bitumen = 24.75 tonnes
Weight of aggregate = 450 - 24.75 = 425.25 tonnes
Taking density of aggregate as 1.50 tonnes/ cum
Volume of aggregate = 425.25 / 1.5 = 283.50 cum
Grading - II / 19mm (Nominal size)
13.2 - 10mm size - 30% of 283.5 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 =119.07 cum
0296
0297
0297
0298
2903
2202
0777

DSR-12

Stone Aggregate (Single size) : 12.5 mm nominal size

Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 06 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Carraige of Stone aggregate below 40 mm nominal size
Lime filter @ 3% (percentage by weight of aggregate)
Dry hydrated lime (factory made)

cum
cum
cum
cum
cum
cum

42.525
42.525
35.44
35.44
119.07
275.00

1050.00
1050.00
1050.00
1100.00
1150.00
87.60

quint

127.60

220.00

Page 702 of 2298

2208

0062
0063
0064
0069
0052
0053
0053
0055
0054

0056
0128
0114

0139

Carraige of Lime
(Considering density of lime as 1.29 MT / Cum
Volume = 12.758 /
(B) MACHINERY
Hot mix Plant -120 TPH capacity
Hot mix Plant 100 TPH Capacity
Paver finisher Hydrostatic with sensor control 100 TPH
Generator 250 kVA
Front end loader 1 cum bucket capacity (incl POL)
Tipper -5 Cum
Add 10% on cost of carraige to cover the cost of loading and
unloading on above item - Qty
Smooth Wheeled Roller 8 to 10 tonne
Vibratory roller 8 to 10 tonne
Finish rolling with 6-8 tonne smooth wheeled tandem roller
(6x0.65)
Tandem Road Roller
(C) LABOUR
Mate
Beldar
Working with HMP, mechanical broom, paver, roller, ashpalt
cutter and assistance for setting out lines, levels and layout of
construction
Skilled Beldar for checking line & levels

cum

9.89

87.60

hours
Hours
hours
hours
Hours
tonne
tonne

3.00
3.00
6.00
6.00
6.00
4500.00
450.00

23700.00
17500.00
2700.00
900.00
800.00
3.00
3.00

Hours
Hours

3.90
3.90

460.00
1550.00

Hours

3.90

1150.00

Day
Day

0.84
14.00

260.00
247.00

Day

5.00

260.00
Total:
1500075.86

Add water charges @ 1% on

Add C.P & OH @15% on 1515076.62

Cost for 191.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 9122.19
Rs 9122.20

Item Code: 16.57.5

P/L Dense Bituminous concrete :40/50 mm with bitumen of grade VG-30 @5.5% and lime filler @ 3% prepared in drum Type Hot
Mix Plant of 60-90 TPH capacity
Details of Cost for : 191.00 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for 191 cum (450 tonnes)
(A) MATERIAL
7309
Paving Asphalt of grade VG-30 of approved quality
tonne
24.75
38500.00
2211
Carraige of Tar bitumen
tonne
24.75
87.60
Aggregate :
Total weight of mix = 450 tonnes
Weight of bitumen = 24.75 tonnes
Weight of aggregate = 450 - 24.75 = 425.25 tonnes
Taking density of aggregate as 1.50 tonnes/ cum
Volume of aggregate = 425.25 / 1.5 = 283.50 cum
Grading - II / 19mm (Nominal size)
13.2 - 10mm size - 30% of 283.5 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 =119.07 cum
0296
0297
0297
0298
2903
2202

DSR-12

Stone Aggregate (Single size) : 12.5 mm nominal size

Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 06 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Carraige of Stone aggregate below 40 mm nominal size

cum
cum
cum
cum
cum
cum

42.525
42.525
35.44
35.44
119.07
275.00

1050.00
1050.00
1050.00
1100.00
1150.00
87.60

Page 703 of 2298

0777
2208

0076
0064
0069
0052
0053
0053
0055
0054

0056

0128
0114
0139

Lime filter @ 3% (percentage by weight of aggregate)

Dry hydrated lime (factory made)
Carraige of Lime
(Considering density of lime as 1.29 MT / Cum
Volume = 12.758 /
(B) MACHINERY
Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour
actual output
Paver finisher Hydrostatic with sensor control 100 TPH
Generator 250 kVA
Front end loader 1 cum bucket capacity (incl POL)
Tipper -5 Cum
Add 10% on cost of carraige to cover the cost of loading and
unloading on above item - Qty
Smooth Wheeled Roller 8 to 10 tonne
Vibratory roller 8 to 10 tonne
Finish rolling with 6-8 tonne smooth wheeled tandem roller
(6x0.65)
Tandem Road Roller
(C) LABOUR
Working with HMP, mechanical broom, paver, roller, ashpalt
cutter and assistance for setting out lines, levels and layout of
construction
Mate
Beldar
Skilled Beldar for checking line & levels

quint

127.60

220.00

cum

9.89

87.60

hour

6.00

14000.00

hours
hours
Hours
tonne
tonne

6.00
6.00
6.00
4500.00
450.00

2700.00
900.00
800.00
3.00
3.00

Hours
Hours

3.90
3.90

460.00
1550.00

Hours

3.90

1150.00

0.84
14.00
5.00

260.00
247.00
260.00
Total:
1453050.86

Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on 1467581.37

Cost for 191.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 8836.22
Rs 8836.20

Item Code: 16.57.6

P/L Dense Bituminous concrete :40/50 mm thickness with bitumen of grade VG-30 @5.5% and lime filler @ 3% and waste plastic
additive @8% prepared in drum Type Hot Mix Plant of 60-90 TPH capacity.

Code

7309
2211

Description
Details of cost for 191 cum (450 tonnes)
(A) MATERIAL
Paving Asphalt of grade VG-30 of approved quality
Carraige of Tar bitumen
Aggregate :
Total weight of mix = 450 tonnes
Weight of bitumen = 24.75 tonnes
Weight of aggregate = 450 - 24.75 = 425.25 tonnes
Taking density of aggregate as 1.50 tonnes/ cum
Volume of aggregate = 425.25 / 1.5 = 283.50 cum
Grading - II / 19mm (Nominal size)
13.2 - 10mm size - 30% of 283.5 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 =119.07 cum

Details of Cost for : 191.00 Cum

Unit
Quantity

tonne
tonne

Rate

24.75
24.75

38500.00
87.60

1.98

40000.00

Wate plastic @ 8% of the weight of bitumen i.e 24.75x8%

7280

DSR-12

Waste plastic additive

MT

Page 704 of 2298

0296
0297
0297
0298
2903
2202
0777
2208

0076
0064
0069
0052
0053
0053
0055
0054

0056

0128
0114
0139

Stone Aggregate (Single size) : 12.5 mm nominal size

Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 06 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Carraige of Stone aggregate below 40 mm nominal size
Lime filter @ 3% (percentage by weight of aggregate)
Dry hydrated lime (factory made)
Carraige of Lime
(Considering density of lime as 1.29 MT / Cum
Volume = 12.758 /
(B) MACHINERY
Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour
actual output
Paver finisher Hydrostatic with sensor control 100 TPH
Generator 250 kVA
Front end loader 1 cum bucket capacity (incl POL)
Tipper -5 Cum
Add 10% on cost of carraige to cover the cost of loading and
unloading on above item - Qty
Smooth Wheeled Roller 8 to 10 tonne
Vibratory roller 8 to 10 tonne
Finish rolling with 6-8 tonne smooth wheeled tandem roller
(6x0.65)
Tandem Road Roller
(C) LABOUR
Working with HMP, mechanical broom, paver, roller, ashpalt
cutter and assistance for setting out lines, levels and layout of
construction
Mate
Beldar
Skilled Beldar for checking line & levels

cum
cum
cum
cum
cum
cum

42.525
42.525
35.44
35.44
119.07
275.00

1050.00
1050.00
1050.00
1100.00
1150.00
87.60

quint

127.60

220.00

cum

9.89

87.60

hour

6.00

14000.00

hours
hours
Hours
tonne
tonne

6.00
6.00
6.00
4500.00
450.00

2700.00
900.00
800.00
3.00
3.00

Hours
Hours

3.90
3.90

460.00
1550.00

Hours

3.90

1150.00

0.84
14.00
5.00

260.00
247.00
260.00
Total:
1532250.86

Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on 1547573.37

Cost for 191.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 9317.85
Rs 9317.85

Item Code: 16.57.7

P/L Dense Bituminous concrete :40/50 mm thickness with bitumen of grade PMB-40 @5.5% and lime filler @ 3% prepared in drum
Type Hot Mix Plant of 60-90 TPH capacity.
Details of Cost for : 191.00 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for 191 cum (450 tonnes)
(A) MATERIAL
0312
Bitumen grade PMB - 40
M.T.
24.75
41400.00
2211
Carraige of Tar bitumen
tonne
24.75
87.60
Aggregate :
Total weight of mix = 450 tonnes
Weight of bitumen = 24.75 tonnes
Weight of aggregate = 450 - 24.75 = 425.25 tonnes
Taking density of aggregate as 1.50 tonnes/ cum
Volume of aggregate = 425.25 / 1.5 = 283.50 cum
Grading - II / 19mm (Nominal size)
13.2 - 10mm size - 30% of 283.5 = 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum

DSR-12

Page 705 of 2298

5mm and below = 42% of 283.50 =119.07 cum

0296
0297
0297
0298
2903
2202
0777
2208

0076
0064
0069
0052
0053
0053
0055
0054

0056

0128
0114
0139

Stone Aggregate (Single size) : 12.5 mm nominal size

Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 06 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Carraige of Stone aggregate below 40 mm nominal size
Lime filter @ 3% (percentage by weight of aggregate)
Dry hydrated lime (factory made)
Carraige of Lime
(Considering density of lime as 1.29 MT / Cum
Volume = 12.758 /
(B) MACHINERY
Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour
actual output
Paver finisher Hydrostatic with sensor control 100 TPH
Generator 250 kVA
Front end loader 1 cum bucket capacity (incl POL)
Tipper -5 Cum
Add 10% on cost of carraige to cover the cost of loading and
unloading on above item - Qty
Smooth Wheeled Roller 8 to 10 tonne
Vibratory roller 8 to 10 tonne
Finish rolling with 6-8 tonne smooth wheeled tandem roller
(6x0.65)
Tandem Road Roller
(C) LABOUR
Working with HMP, mechanical broom, paver, roller, ashpalt
cutter and assistance for setting out lines, levels and layout of
construction
Mate
Beldar
Skilled Beldar for checking line & levels

cum
cum
cum
cum
cum
cum

42.525
42.525
35.44
35.44
119.07
275.00

1050.00
1050.00
1050.00
1100.00
1150.00
87.60

quint

127.60

220.00

cum

9.89

87.60

hour

6.00

14000.00

hours
hours
Hours
tonne
tonne

6.00
6.00
6.00
4500.00
450.00

2700.00
900.00
800.00
3.00
3.00

Hours
Hours

3.90
3.90

460.00
1550.00

Hours

3.90

1150.00

0.84
14.00
5.00

260.00
247.00
260.00
Total:
1524825.86

Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on 1540074.12

Cost for 191.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 9272.70
Rs 9272.70

Item Code: 16.57.8

P/L Dense Bituminous concrete :40/50 mm thickness with bitumen of gradeCRMB-60 @5.5% and lime filler @ 3% prepared in drum
Type Hot Mix Plant of 60-90 TPH capacity.
Details of Cost for : 191.00 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for 191 cum (450 tonnes)
(A) MATERIAL
7741
Modified Bitumen Refinery produced CRMB - 60
tonne
24.75
38800.00
2211
Carraige of Tar bitumen
tonne
24.75
87.60
Aggregate :
Total weight of mix = 450 tonnes
Weight of bitumen = 24.75 tonnes
Weight of aggregate = 450 - 24.75 = 425.25 tonnes
Taking density of aggregate as 1.50 tonnes/ cum
Volume of aggregate = 425.25 / 1.5 = 283.50 cum
Grading - II / 19mm (Nominal size)

DSR-12

Page 706 of 2298

13.2 - 10mm size - 30% of 283.5 = 85.05 cum

10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 =119.07 cum
0296
0297
0297
0298
2903
2202
0777
2208

0076
0064
0069
0052
0053
0053
0055
0054

0056

0128
0114
0139

Stone Aggregate (Single size) : 12.5 mm nominal size

Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 06 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Carraige of Stone aggregate below 40 mm nominal size
Lime filter @ 3% (percentage by weight of aggregate)
Dry hydrated lime (factory made)
Carraige of Lime
(Considering density of lime as 1.29 MT / Cum
Volume = 12.758 /
(B) MACHINERY
Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour
actual output
Paver finisher Hydrostatic with sensor control 100 TPH
Generator 250 kVA
Front end loader 1 cum bucket capacity (incl POL)
Tipper -5 Cum
Add 10% on cost of carraige to cover the cost of loading and
unloading on above item - Qty
Smooth Wheeled Roller 8 to 10 tonne
Vibratory roller 8 to 10 tonne
Finish rolling with 6-8 tonne smooth wheeled tandem roller
(6x0.65)
Tandem Road Roller
(C) LABOUR
Working with HMP, mechanical broom, paver, roller, ashpalt
cutter and assistance for setting out lines, levels and layout of
construction
Mate
Beldar
Skilled Beldar for checking line & levels

cum
cum
cum
cum
cum
cum

42.525
42.525
35.44
35.44
119.07
275.00

1050.00
1050.00
1050.00
1100.00
1150.00
87.60

quint

127.60

220.00

cum

9.89

87.60

hour

6.00

14000.00

hours
hours
Hours
tonne
tonne

6.00
6.00
6.00
4500.00
450.00

2700.00
900.00
800.00
3.00
3.00

Hours
Hours

3.90
3.90

460.00
1550.00

Hours

3.90

1150.00

0.84
14.00
5.00

260.00
247.00
260.00
Total:
1460475.86

Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on 1475080.62

Cost for 191.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 8881.38
Rs 8881.40

Item Code: 16.59.1

Manufacturing, S/F rectro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high
intensity encapsulated type heat activated rectro reflective sheeting: Mandatory/ Regulatory sign boards of 900 mm dia.

Code

2704

DSR-12

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details cost for 1 no. of 0.636 sqm
MATERIALS:
3.14/4x(0.90x0.90)= 0.636 sqm
Aluminium sheet 2 mm thick
add 10% wastage = 0.064 i.e. 0.700sqm @ 5.60kg/sqm =
3.92kg
Cost of Aluminium sheet 2mm thick.
kilog
3.92
Carriage of aluminium sheet

Rate

210.00

Page 707 of 2298

2302

8690

10.002

0128
0114
9999

13.061.01
13.052.01

9999

3.92kg or 0.00392 M.T.

High intensity retro reflective sheet = 0.70 sqm.
High intensity sheet for lettering / sign and border etc.
Taking 40% Area =0.28sqm,total = 0.70 +
0.28= 0.98 sqm
High intensity retro - reflective sheet.
Steel work
Supporting frame 25x25x3mm for 900mm dia board:3.14D=3.1416x0.90=2.83 metre
@1.10kg/m =3.11kg
Angle iron 35x35x.5mm for fixing the support frame with
vertical Tee-iron support post
2x0.05=0.10m @ 2.6 kg/m = 0.26kg
Vertical post of M.S. tee of section
ISNT 50x50x6mm = 3.75 metre
@4.50kg/m= 16.88 kg
Base plate to be welded at bottom end of tee
(As hold fast)
(100xl00x5mm)x7850/69)=0.39kg, total =
3.11 + 0.26 +16.88 + 0.39 = 20.64kg.
Add wastage @ 5% = 1.03
Total = 20.64 + 1.03 = 21.67kg.
Structural steel work riveted, bolted or welded in builtup
sections, trusses etc ..and app
LABOUR.
Mate
Beldar
Cost of material for drilling holes, nut bolts & rivets,
fabrication etc.
Painting with synthetic enamel paint on steel work support
frame 25x25x3mm
=1x2.7x0.10=0.27 sqm
Fixing angle 35x35x5mm
= 2x0.50x0.14=0.014 sqm
Vertical post Tee 50x50x6mm
=3.65x0.20=0.730sqm
Baseplate 100xl00x5mm
Surface area = 100x100x5 = 0.022sqm

tonne

sqm

Day
Day
L.S.

4x0.10x0.005 = 0.002
total = 1.036 sqm
Painting with synthetic enamel paint : Two or more coats on
new work
Finishing with Epoxy paint (two or more coats) appropriate
priming coat, On steel work
Rate as per Item no. 13.52.1
Sundries and hold fast etc.
L.S.

0.00392

77.87

0.98

1525.00

21.67

66.52

0.01
0.25
65.00

260.00
247.00
1.49

1.07

53.87

0.636

105.51

78.00

1.49
Total:
2595.43

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

2621.38
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 4580.82
Rs 4580.35

Item Code: 16.59.2

DSR-12

Page 708 of 2298

Manufacturing, S/F rectro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high
intensity encapsulated type heat activated rectro reflective sheeting: Cautionary/ warning sign boards of equilateral triangular ..

Code

2704
2302

8690

10.002

0128
0114
9999

13.061.01

13.052.01

DSR-12

Description
Details cost for 1 board of 0.35 sqm
Materials
Area 1/2x(0.90x0.78)= 0.35 sqm
Aluminium sheet 2 mm thick
add 10% wastage = 0.04 i.e. 0.39sqm @
5.60kg/sqm = 2.18kg
Cost of Aluiminium sheet 2mm thick.
Carriage of sheet
Carraige of Aluminium sheet
High intensity retro reflective sheet = 0.39 sqm.
High intensity sheet for lettering / sign/ symbol/ border etc.
Taking 40% Area =0.16sqm, total = 0.39 + sqm
0.16 = 0.55 sqm
High intensity retro - reflective sheet.
Steel work
Angle iron frame 25x25x3mm 3x0.90=2.70 metre
@ 1.10kg/m =2.97kg
Angle iron 35x35x0.50mm for fixing the support frame to Teeiron support post
2x0.05=0.10m @ 2.6 kg/m = 0.26kg
Vertical post of M.S. tee of section
ISNT 50x50x6mm = Ix3.65=3.65m @
4.50kg/m= 16.43kg
Base plate 100x100x5mm connected to bottom end of
vertical tee.
(0.10x0.10x0.005x7850kg =0.39kg, total =
2.97 + 0.26 + 16.43 + 0.39 = 20.05kg.
Add wastage @ 5% = 1.00, total = 20.05 +
1.00 = 21.05kg
Structural steel work riveted, bolted or welded in builtup
sections, trusses etc ..and app
LABOUR.
Mate
Beldar
Cost of material for drilling holes, nut bolts & rivets,
fabrication etc.
Painting with synthetic enamel paint on Angle iron .
support frame 25x25x3mm
=1x2.7x0.10=0.27 sqm.
Angle 35x35x5mm
= 2x0.50x0.14=0.014 sqm
Tee 50x50x6mm
= 1x3.65x0.20 =0.73sqm
Base plate to be welded at bottom end of Tee
100xl00x5mm
0.022 sqm
Total = 1.036 sqm
Painting with synthetic enamel paint : Two or more coats on
new work
Painting with epoxy paint on back side of aluminium sheet.
0.35 sqm
Finishing with Epoxy paint (two or more coats) appropriate
priming coat, On steel work

Details of Cost for : 1.00 No.

Unit
Quantity

kilog
tonne

sqm

Day
Day
L.S.

Rate

2.18

210.00

0.00218

77.87

0.55

1525.00

21.05

66.52

0.01
0.25
65.00

260.00
247.00
1.49

1.036

53.87

0.35

105.51

Page 709 of 2298

9999

Sundries & hold fast etc.

L.S.

65.00

Add water charges @ 1% except on [A]+[B]+[C] i.e on

1.49
Total:
1554.77

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

1570.32
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 3298.86
Rs 3298.40

Item Code: 16.60.1

Manufacturing, S/F rectro reflective overhead sinage boards made up of 2 mm thick aluminium sheet, face to be fully covered with
high intensity and encapsulated lens type heat activated rectro reflective sheeting conforming to type-III of ASTM-D-4956-01:

Code
2704

2302

8690

0588
9999
9999
9999
13.052.01

Description
Details of cost for boards area 3.00x1.20=3.60 sqm
Aluminium sheet 2mm thick =3.60 sqm@ 5.60kg/sqm = 20.16
kg
Add 5% wastage = 1.01 kg=
Total 20.16+1.01=21.17 kg
Carnage of sheet.
(b) High intensity retro reflective sheet. 3.60 sqm
high itensity sheet for written matter.
Taking 40% = 3.60x40% = 1.44 sqm.
Total = 3.60 + 1.44 = 5.04 sqm.
High intensity retro - reflective sheet.
(c) C.P. Brass rivets screws etc.
for peripheries = 2x(300+120)/30=28 nos.
For vertical Rows = 2x (120/30-2)=4 nos.
Total= 28 + 4 = 32nos.
For wastage @ 5% =2 nos.
Total = 32 +2 = 34 nos.
Chromium plated Brass screws 25 mm
Labour charges for drilling holes
Hire charges of drill machine and sundries
Hoisting board
Labour charges for manufacturing of board including.
fixing retro reflective sheet
Finishing with Epoxy paint (two or more coats) appropriate
priming coat, On steel work
Aluminium sheet, Rate as per Item no. 13.52.1

Details of Cost for : 3.60 Sqm

Unit
Quantity

Rate

kilog

21.17

210.00

tonne

0.0212

77.87

5.04

1525.00

34.00

115.00

L.S.
L.S.

52.00
390.00

1.49
1.49

L.S.

564.00
3.60

1.49
105.51

Add water charges @ 1% except on [A] i.e on

Total:
13671.39

sqm

100 N

Add C.P & OH @15% except on [A] i.e on

13808.10
Cost for 3.60 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 4516.43
Rs 4516.50

Item Code: 16.61

Providing rectro reflective regulatory sign board of 900mm dia. made out of 2 mm thick aluminium sheet, face to be fully covered
with high intensity encapsulated lens type rectroreflective sheeting as approved by Engineer-in- charge as per IRC; 67: 2001,

Details of Cost for : 1.00 No.

DSR-12

Page 710 of 2298

Code

2704

8690

10.002

0128
0114
9999

13.061.01
13.052.01
9999

Description
Unit
Details cost for one board of 0.635 sqm
Aluminium sheet 2mm thick = 0.635 sqm.
Add 10% wastage = 0.06 sqm, total = 0.635 + 0.06 = 0 695 sqn
Say 0.70 sqm @ 5.60 kg/sqm =3.98 kg
Cost of Alummiurfi sheet 2mm thick (X).
High intensity retro reflective sheet = 0.70 sqm
high intensity sheet for lettering/ sing and border etc.
Taking 40% Area=0.28 sqm, total = 0.70 +
0.28 = 0.98 sqm.
High intensity retro - reflective sheet (Y).
Angle iron 40x40x4mm = 4x0.60=2.40@
2.4kg/ mtr = 5.76 kg
50x50x5 mm = 2x4m =8m @ 3kg/ mtr =24.00 kg
Total = 5.76 + 24.00 = 29.76 kg
Structural steel work riveted, bolted or welded in builtup
sections, trusses etc ..and app
LABOUR.
Mate
Beldar
Cost of material for drilling holes, nut bolts & rivets,
facrication etc. @ 2% on (X+Y+A
Painting with synthetic enamel paint
1x2.40x0.12=0.29 sqm
1x4.00x0.12=0.80 sqm, total = 0.29 + 0.80 =
1.09 sqm
Painting with synthetic enamel paint : Two or more coats on
new work
Finishing with Epoxy paint (two or more coats) appropriate
priming coat, On steel work
Sundries & hole fast etc,

Quantity

Rate

kilog

3.98

210.00

sqm

0.98

1525.00

29.76

66.52

0.01
0.25
70.23

260.00
247.00
1.49

1.09

53.87

0.635

105.51

31.20

1.49
Total:
2545.78

Day
Day
L.S.

L.S.

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

2571.24
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 5062.29
Rs 5061.65

Item Code: 16.62

P/A 2.5 mm thick road marking strips (rectro reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi
automatic thermo- plastic paint applicator machine.

Code

8687

DSR-12

Description
Details of cost for 100.00 sqm (Area covered on one day):-

Details of Cost for : 100.00 Sqm

Unit
Quantity

MATERIALS
Thermoplastic paint screeded in paint form for 2.5 mm thick
road making stripe including glass beads etc. as per
specifications.
100sqm @ 5kg/5sqm =500kg. wastage @ 5% =25 kg
Total = 525 kg
Thermoplastic paint
kg
Glass beads (B-class) to be sprayed over the paint stripe @
250 gms. Per sqm =
100x0.25=25 kg

525.00

Rate

63.00

Page 711 of 2298

8688
0033
0005
1241

0157
0139
9999
0114

Glass beads
MACHINERY
Hiring charges of paint applicator machine
Hire charges of trucks for local shifting.
LPG cylinder of heating (Commercial cylinder of 19.00 kg
capacity)
LABOUR
Machine operator.
Skilled labour.
Labour for cleaning for road surface.
Beldar for erecting barricades, traffic diversions, stretching
ropes etc.

kg

25.00

62.00

per d
Day
kg

1.00
1.00
71.06

750.00
1600.00
51.00

Day
Day
L.S.
Day

1.00
4.00
364.00
4.20

327.00
260.00
1.49
247.00

Add water charges @ 1% on

Total:
43545.82

Add C.P & OH @15% on

43981.28
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 505.78
Rs 505.80

Item Code: 16.63

P/L and making kerb channel 30 cm wide and 50 mm thick of CC 1:3:6 over 75 mm thick compacted bed of dry brick ballast of
40mm nominal size well rammed and consolidated and grouted with fine sand.

Code
0287
2260
6501
2335
0114
0115
0101
04.001.06

Details of Cost for : 10.00 m

Unit
Quantity

Description
METERIALS
Brick Aggregate 40 mm nominal size
Carriage of Brick Aggregate
Jamuna sand
Carriage of Jamuna sand
Labour for spreading, ramming and consolidation.
Beldar
Coolie
Bhisti
P/L CC excluding centering - All work up to plinth level: 1:3:6 Coarse sand, 40mmstone a

Rate

cum
cum
cum
cum

1.00
1.00
0.08
0.08

500.00
95.22
500.00
87.60

Day
Day
Day

0.35
0.26
0.18
0.50

247.00
247.00
260.00
3888.20

Add water charges @ 1% except on [A] i.e on

Total:
839.70

Add C.P & OH @15% except on [A] i.e on

848.10
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 291.94
Rs 291.95

Item Code: 16.64

P/L 75 mm thick compacted bed of dry brick aggregate of 40mm nominal size i/c grouting with jamuna sand.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
METERIALS
0287
Brick Aggregate 40 mm nominal size
cum
1.00
500.00
2260
Carriage of Brick Aggregate
cum
1.00
95.22
6501
Jamuna sand
cum
0.08
500.00
2335
Carriage of Jamuna sand
cum
0.08
87.60
Labour for spreading, ramming and consolidation.
0114
Beldar
Day
0.35
247.00

DSR-12

Page 712 of 2298

0115
0101

Coolie
Bhisti

Day
Day

0.26
0.18

Add water charges @ 1% on

247.00
260.00
Total:
839.70

Add C.P & OH @15% on

848.10
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 97.53
Rs 97.55

Item Code: 16.65

P/F post delineators (made of ABS body fitted with 2 Nos 100 mm dia.) reflective and reflectors are mounted on M.S pipe of 65 mm
dia.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS.
8685
Delinator
each
1.00
310.00
9999
Fixing charges.
L.S.
78.00
1.49
9999
Fixing material
L.S.
39.00
1.49
Total:
Add water charges @ 1% on
484.33
Add C.P & OH @15% on
489.17
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 562.55
Rs 562.55

Item Code: 16.66.1

Excavating holes upto 0.10 Cum i/c getting out the excavated soil then returing the soil as required in layer: All kind of soil.

Code

02.008.01

Description
Details of cost for 30 holes
Earth work 30x0.10=3.00cum
Extra labour for filling and ramming
E/W excavation in foundation trenches .. .. All kinds of soil.

9999

(B) Sundries

Details of Cost for : 30.00 Nos

Unit
Quantity

Rate

Cum

3.00

130.78

L.S.

13.52

1.49
Total:
20.14

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

20.34
Cost for 30.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 13.86
Rs 19.75

Item Code: 16.67

P/F at or near ground level factory made RCC pavement slab of M-30 grade of size 450x 450x 50 mm in footpath to the required
level and line over a bed of 20mm ave CM 1: 3 C.sand.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
8694
Precast pavement slab 450 x 450 x 50mm (M-30)
each
48.00
55.00
9999
carriage of slab
L.S.
52.00
1.49

DSR-12

Page 713 of 2298

03.010
0155
0100
0114
0101
9999

Cement mortar 1:5 (1 cement : 5 coarse sand)

LABOUR
Mason.
Bandhani
Beldar
Bhisti
Sundries

Cum

0.25

3129.96

Day
Day
Day
Day
L.S.

1.10
1.10
0.55
0.27
10.79

287.00
260.00
247.00
260.00
1.49
Total:
4323.80

Add water charges @ 1% on

Add C.P & OH @15% on

4367.04
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 502.21
Rs 502.20

Item Code: 16.68

P/F 60 mm thick factory made C.C interlocking paver Block of M-30 grade made by block making machine over and i/c 50 mm thick
bed of C. sand, filling the joints.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
8689
Interlocking C.C. paver block ( 60 mm thick), M.30
sqm
10.00
325.00
Bedding Layer 50mm thick
0982
Coarse sand =10x0.050=0.50 cum
cum
0.50
1120.00
2203
Carriage of coarse sand
cum
0.50
87.60
0983
Fine sand
cum
0.15
640.00
2261
Carraige of Fine sand.
cum
0.15
87.60
Laying charges (Bassed on actual observation)
0123
0124
0114
0115

Mason I class
Mason II class
Beldar
Coolie

Day
Day
Day
Day

0.50
0.50
1.00
0.50

Add water charges @ 1% on

301.00
273.00
247.00
247.00
Total:
4620.44

Add C.P & OH @15% on

4666.64
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 536.66
Rs 536.65

Item Code: 16.69

P?L at or near ground level factory made kerb stone of M-25 grade cement.
Code
8686

03.008
0123
0124
0114
0115

Description
Precast C.C. Kerb stone M - 25
247x0.40x0.375x0.20=7.41 cum
mortar 1:3 for fixing join
Cement mortar 1:3 (1 cement : 3 coarse sand)
Labour for fixing of Kerb stone
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Beldar
Coolie

Details of Cost for : 7.50 Cum

Unit
Quantity

cum
Cum

7.41
0.073

4025.00
4145.53

Day
Day
Day
Day

2.50
2.50
2.50
1.65

301.00
273.00
247.00
247.00
Total:
32587.92

Add water charges @ 1% on

DSR-12

Rate

Page 714 of 2298

Add C.P & OH @15% on

32913.80
Cost for 7.50 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5046.78
Rs 5046.80

Item Code: 16.70.1

P/F G.I. chain link fabric fencing of required width in mesh size 50x50 mm i/c stren- gthening with 2 mm dia. wire: Made of G.I. of
dia. 4 mm.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIAL.
G.I. chain link 50x50 mm mesh = 10.00 sqm.
Wastage5% = 0.50sqm
Total= 10.50 sqm
8695
Chain link fabric fancing mesh of size
sqm
10.50
258.00
50x50mm made of G.I. wire of dia. 4mm.
9999
Carriage.
L.S.
156.00
1.49
LABOUR
0103
Blacksmith 2nd class
Day
2.14
273.00
0114
Beldar
Day
1.62
247.00
9999
Sundries including G.I. wire, nuts and bolts and warshers.
L.S.
174.75
1.49

Add water charges @ 1% on

Total:
4186.18

Add C.P & OH @15% on

4228.04
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 486.23
Rs 486.20

Item Code: 16.70.2

P/F G.I. chain link fabric fencing of required width in mesh size 50x50 mm i/c stren- gthening with 2 mm dia. wire: Made of GI of
dia. 4 mm, PVC coated in required colour and shade.

Code

8696

9999
0103
0114
9999

Description
MATERIAL.
G.I. chain link 50x50 mm mesh PVC coated = 10sqm
wastase@5%= 0.50 sqm
Total = 10.50 sqm.
Chain link fabric fancing mesh of size
50x50mm made of G.I. wire of dia. 4mm,
PVC coated to outer dia. 5mm.
Carriage.
LABOUR
Blacksmith 2nd class
Beldar
Sundries including G.I. wire, nuts and bolts and washers.

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

sqm

10.50

285.00

L.S.

156.00

1.49

Day
Day
L.S.

2.14
1.62
174.75

273.00
247.00
1.49

Add water charges @ 1% on

Total:
4469.68

Add C.P & OH @15% on

4514.38
Cost for 10.00 Sqm

DSR-12

Page 715 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 519.15
Rs 519.15

Item Code: 16.71

P/F G.I. chain link fabric fencing of required width in mesh size 25 x 25 mm made of G.I. wire of dia. 3 mm i/c strengthening with 2
mm dia. wire.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIAL.
G.I. chain link 25x25 mm mesh = 10.00 sqm.
wastase@5%= 0.50 sqm
8697
Cham link fabric fancing mesh of size
sqm
10.50
340.00
25x25mm made of G.I. wire of dia. 3mm.
9999
Carriage.
L.S.
156.00
1.49
LABOUR
0103
Blacksmith 2nd class
Day
2.14
273.00
0114
Beldar
Day
1.62
247.00
9999
Sundries including G.I. wire, nuts and bolts and warshers.
L.S.
174.75
1.49

Add water charges @ 1% on

Total:
5047.18

Add C.P & OH @15% on

5097.65
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 586.23
Rs 586.25

Item Code: 16.72

S/S stone (for stone pitching) 22.5 cm thick at site.
Code
1158
2215

Description

Details of Cost for : 2.25 Cum

Unit
Quantity

MATERIALS
22.5 cm thick stone (Hard)
cum
Carriage by mechanical transport i/c loading unloading and cum
stacking

Rate

2.25
2.25

420.00
103.06

Add water charges @ 1% on

Total:
1176.89

Add C.P & OH @15% on

1188.66
Cost for 2.25 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 607.54
Rs 607.55

Item Code: 16.73

Dry stone pitching 22.5 cm thick laid in required profile.
Code
0123
0124
0114
0115
9999

Description
LABOUR
Mason 1st class.
Mason 2nd class.
Belder
Coolie
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
Day
Day
L.S.

1.08
1.08
2.15
1.61
6.76

Add water charges @ 1% on

DSR-12

Rate
301.00
273.00
247.00
247.00
1.49
Total:
1558.71

Page 716 of 2298

Add C.P & OH @15% on

1574.30
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 181.05
Rs 181.05

Item Code: 16.74.1

75 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with : Moorum.

Code
0810
2265

0114
0101

Description

Details of Cost for : 100.00 Sqm

Unit
Quantity

MATERIALS
Moorum.
cum
Carriage by mechanical transport i/c loading unloading and cum
stacking
LABOUR
Beldar
Day
Bhisti
Day

Rate

7.50
7.50

450.00
87.60

1.64
0.13

247.00
260.00
Total:
4470.88

Add water charges @ 1% on

Add C.P & OH @15% on

4515.59
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 51.93
Rs 51.95

Item Code: 16.74.2

75 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with : Stone agg. 20
mm n size.
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
0295
Stone aggregate 20mm nominal size
cum
7.50
1050.00
100sqm x7.50cm= 7.50 cum
2202
Carriage of stone aggregate 20mm nominal size
cum
7.50
87.60
LABOUR
0114
Beldar
Day
2.05
247.00
0101
Bhisti
Day
0.13
260.00
Total:
Add water charges @ 1% on
9072.15
Add C.P & OH @15% on
9162.87
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 105.37
Rs 105.35

Item Code: 16.74.3

75 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with : Stone agg. 40
mm n size.
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS
Stone aggregate .40 mm nominal size
0293
100sqm x7.50cm= 7.50 cum
cum
7.50
950.00

DSR-12

Page 717 of 2298

2206
0114
0101

Carriage of stone aggregate 40mm nominal size .

LABOUR
Beldar
Bhisti

cum

7.50

95.22

Day
Day

2.05
0.13

247.00
260.00
Total:
8379.30

Add water charges @ 1% on

Add C.P & OH @15% on

8463.09
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 97.33
Rs 97.35

Item Code: 16.75

P/L C.C pavement of mix M-25 with ready mixed concrete from batching plant. concrete shall be laid and finished with screed board
vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush etc complete.

Code

05.037.01
9999
9999

Description

Details of Cost for : 1.00 Cum

Unit
Quantity

MATERIALS
Ready mix concrete M 25 = 1.00 cum. i/c placing of concrete,
vibrating, leveling etc.
P/L RM M-25 grade concrete for RCC work (using cement @ Cum
330 kg/cum) - All work upto plinth
Operational charges for vacuum dewatering system i/c screed L.S.
vibration , placing of fil
T& P charges i/c consumable power charges, loading , L.S.
unloading and hire charges of equipme

Rate

1.00

5590.62

57.20

1.49

41.60

1.49

Add water charges @ 1% except on [A] i.e on

Total:
147.21

Add C.P & OH @15% except on [A] i.e on

148.68
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 5761.60
Rs 6067.10

Item Code: 16.76

Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C. pavement.
Details of Cost for : -1.00 Cum
Code
Description
Unit
Quantity
Cement for M-25 mix = 0.410 t
Cement for M- 20 mix = 0.383 t
0367
Difference
tonne
0.027
2209
Carriage of Cement
tonne
0.027
Plasticizer for M-25 mix = 2.050kg
Plasticizer for M- 20 mix= 1.915 kg
7318
Difference = 0.135 kg
kilog
0.135
Add water charges @ 1% on

Rate

5000.00
77.87

36.50
Total:
142.03

Add C.P & OH @15% on

143.45
Cost for -1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

DSR-12

-Rs 164.97
-Rs 164.95

Page 718 of 2298

Item Code: 16.77

Scarifying the existing bituminous road surface to a depth of 50 mm.
Code
0128
0114
0038
0014
0017

Details of Cost for : 100.00 Sqm

Unit
Quantity

Description
LABOUR
Mate
Beldar
MACHINERY
Tractor with ripper attachment.
Front end loader
Hire and runining charges of tipper

Day
Day
per d
Day
Day

Rate

0.01
0.25

260.00
247.00

0.01
0.025
0.0288

1350.00
5000.00
1700.00
Total:
251.81

Add water charges @ 1% on

Add C.P & OH @15% on

254.33
Cost for 100.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 2.92
Rs 2.90

Item Code: 16.78.1

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant
at OMC ... With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Description
Details of cost for 225 cum (450 tonnes)
(A) MATERIAL :
Close graded granular sub-base material as per
Grading-I of specifications
Close graded granular sub-base material as per
Grading-I of specifications
53mm to 9.5mm @ 50% = 144 cum
9.5 mm to 2.36mm @ 20% = 57 cum
2.36mm below @ 30% = 86.40 cum

0292
0297
2206

Stone Aggregate (Single size) : 50 mm nominal size

Stone Aggregate (Single size) : 10 mm nominal size
Carraige of Stone aggregate 40 mm nominal size and above

cum
cum
cum

72.00
72.00
72.00

900.00
1050.00
95.22

2202
1179
2202
2903
2904
2203

Carraige of Stone aggregate below 40 mm nominal size

Crushed stone 2.36 mm to 12.5 mm size
Carraige of Stone aggregate below 40 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Stone chippings/ screenings 150 micron nominal size
Carraige of Coarse sand (stone chippings)
(B) MACHINERY
Wet Mix Plant 60 TPH
Generator 100 KVA/125 KVA
Water Tanker 5 to 6 KL capacity
(5 km lead with one trip per hour)
Front end loader 1 cum bucket capacity (incl POL)
Tipper 10 tonne capacity( taking lead= 10 Km)
=450x10 =4500 t.Km

cum
cum
cum
cum
cum
cum

72.00
57.00
57.00
43.20
43.20
86.40

87.60
915.00
87.60
1150.00
1150.00
87.60

hour
hour
hour

6.00
6.00
4.50

1200.00
700.00
150.00

Hours

6.00

800.00

Tipper -5 Cum
Add 10% of cost of carriage to cover loading and unloading

tonne

4500.00

3.00

(Qty taken as 10% of 4500 = 45

tonne

450.00

3.00

0059
0070
0057
0052

0053
0053

DSR-12

Details of Cost for : 225.00 Cum

Unit
Quantity

Code

Rate

Page 719 of 2298

0050
0054
0128
0139
0114

Motor Grader 3.35 metre blade

Vibratory roller 8 to 10 tonne
(C) LABOUR :
Mate
Skilled Beldar (for floor rubbing etc.)
Beldar

tonn
Hours

6.00
6.00

2450.00
1550.00

Day
Day
Day

0.40
2.00
8.00

260.00
260.00
247.00
Total:
375964.88

Add water charges @ 1% on

Add C.P & OH @15% on

379724.53
Cost for 225.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 1940.81
Rs 1940.80

Item Code: 16.78.2

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant
at OMC ... With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

Description
Details of cost for 225 cum (450 tonnes)
(A) MATERIAL :
Close graded granular sub-base material as per
Grading-I of specifications
Close graded granular sub-base material as per
Grading-I of specifications
26.5mm to 9.5mm @ 35% = 100.80 cum
9.5 mm to 2.36mm @ 25% = 72 cum
2.36mm below @ 40% = 115.20 cum

0294
0297
2206

Stone Aggregate (Single size) : 25 mm nominal size

Stone Aggregate (Single size) : 10 mm nominal size
Carraige of Stone aggregate 40 mm nominal size and above

cum
cum
cum

50.40
50.40
50.40

1000.00
1050.00
95.22

2202
1179
2202
2903
2904
2203

Carraige of Stone aggregate below 40 mm nominal size

Crushed stone 2.36 mm to 12.5 mm size
Carraige of Stone aggregate below 40 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Stone chippings/ screenings 150 micron nominal size
Carraige of Coarse sand (stone chippings)
(B) MACHINERY
Wet Mix Plant 60 TPH (75 tonne capacity)
Generator 100 KVA/125 KVA
Water Tanker 5 to 6 KL capacity
(5 km lead with one trip per hour)
Front end loader 1 cum bucket capacity (incl POL)
Tipper 10 tonne capacity( taking lead= 10 Km)
=450x10 =4500 t.Km

cum
cum
cum
cum
cum
cum

50.40
72.00
72.00
57.60
57.60
115.20

87.60
915.00
87.60
1150.00
1150.00
87.60

hour
hour
hour

6.00
6.00
4.50

1200.00
700.00
150.00

Hours

6.00

800.00

Tipper -5 Cum
Add 10% of cost of carriage to cover loading and unloading

tonne

4500.00

3.00

(Qty taken as 10% of 4500 = 45

Motor Grader 3.35 metre blade
Vibratory roller 8 to 10 tonne
(C) LABOUR :
Mate
Skilled Beldar (for floor rubbing etc.)

tonne
tonn
Hours

450.00
6.00
6.00

3.00
2450.00
1550.00

0.40
2.00

260.00
260.00

0059
0070
0057
0052

0053
0053

0050
0054
0128
0139

DSR-12

Details of Cost for : 225.00 Cum

Unit
Quantity

Code

Day
Day

Rate

Page 720 of 2298

0114

Beldar

Day

8.00

Add water charges @ 1% on

247.00
Total:
385617.85

Add C.P & OH @15% on

389474.03
Cost for 225.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 1990.65
Rs 1990.65

Item Code: 16.78.3

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant
at OMC ... With material conforming to Grade-III (size range 26.5 mm to 0.075 mm ) having CBR Value-20

Code

Details of Cost for : 225.00 Cum

Unit
Quantity

Description
Details of cost for 225 cum (450 tonnes)
(A) MATERIAL :
Close graded granular sub-base material as per
Grading-III of specifications

Rate

9.5 mm to 4.75mm @ 35% = 100.80 cum

4.75 to 2.36mm @ 12.5% = 36.00 cum
2.36mm and below @ 52.5% = 151.20 cum
1179
2202
1179
2202
2903
2904
2203
0059
0070
0057
0052

0053
0053

0050
0054
0128
0139
0114

Crushed stone 2.36 mm to 12.5 mm size

Carraige of Stone aggregate below 40 mm nominal size
Crushed stone 2.36 mm to 12.5 mm size
Carraige of Stone aggregate below 40 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Stone chippings/ screenings 150 micron nominal size
Carraige of Coarse sand
(B) MACHINERY
Wet Mix Plant 60 TPH (75 tonne capacity)
Generator 100 KVA/125 KVA
Water Tanker 5 to 6 KL capacity
(5 km lead with one trip per hour)
Front end loader 1 cum bucket capacity (incl POL)
Tipper 10 tonne capacity( taking lead= 10 Km)
=450x10 =4500 t.Km

cum
cum
cum
cum
cum
cum
cum

100.80
100.80
36.00
36.00
75.60
75.60
151.20

915.00
87.60
915.00
87.60
1150.00
1150.00
87.60

hour
hour
hour

6.00
6.00
4.50

1200.00
700.00
150.00

Hours

6.00

800.00

Tipper -5 Cum
Add 10% of cost of carriage to cover loading and unloading

tonne

4500.00

3.00

(Qty taken as 10% of 4500 = 45

Motor Grader 3.35 metre blade
Vibratory roller 8 to 10 tonne
(C) LABOUR :
Mate
Skilled Beldar (for floor rubbing etc.)
Beldar

tonne
tonn
Hours

450.00
6.00
6.00

3.00
2450.00
1550.00

0.40
2.00
8.00

260.00
260.00
247.00
Total:
382605.80

Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

386431.86
Cost for 225.00 Cum
Rate per One Cum:
Rate as per DSR-12:

DSR-12

Rs 1975.10
Rs 1975.10

Page 721 of 2298

Item Code: 16.79

P/L spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) compacting
with vibratory roller of 8 to 10 tonne capacity ..
Details of Cost for : 225.00 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for 225 cum (495 tonne)
(A) MATERIAL :
Conforming to table ......
45mm to22.4mm @ 30% = 89.10 cum
Qty for 0292,0293,0294,0295 codes = 89.10 /4
= 22.275 cum
Qty for 2206, 2202 codes = 89.10 /2 = 44.55 cum
22.4 mm to 2.36mm @ 40% = 118.80 cum
Qty for 0294,0295 codes = 118.80 /4 = 29.70 um
Qty for 1179 code = 118.80 /2 = 59.40 cum
2.36 mm to 75 micron @ 30% = 89.10 cum
Qty for 2903, 2904 codes = 89.10/2 = 44.55 cum
0292
Stone Aggregate (Single size) : 50 mm nominal size
cum
22.275
900.00
0293
Stone Aggregate (Single size) : 40 mm nominal size
cum
22.275
950.00
0294
Stone Aggregate (Single size) : 25 mm nominal size
cum
22.275
1000.00
0295
Stone Aggregate (Single size) : 20 mm nominal size
cum
22.275
1050.00
2206
Carraige of Stone aggregate 40 mm nominal size and above
cum
44.55
95.22
2202
0294
0295
1179
2202
2903
2904
2203
0059
0070
0057
0052

0053
0053

0065
0054
0128
0139
0114

Carraige of Stone aggregate below 40 mm nominal size

Stone Aggregate (Single size) : 25 mm nominal size
Stone Aggregate (Single size) : 20 mm nominal size
Crushed stone 2.36 mm to 12.5 mm size
Carraige of Stone aggregate below 40 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Stone chippings/ screenings 150 micron nominal size
Carraige of stone chippings (same as coarse sand)
(B) MACHINERY :
Wet Mix Plant 60 TPH
@75 tonne capacity
Generator 100 KVA/125 KVA
Water Tanker 5 to 6 KL capacity
5 km lead with one trip per hour
Front end loader 1 cum bucket capacity (incl POL)
Tipper 10 tonne capacity( taking Iead= 10 Km)
=495 x 10 =4950 t.km

cum
cum
cum
cum
cum
cum
cum
cum

44.55
29.70
29.70
59.40
118.80
44.55
44.55
89.10

87.60
1000.00
1050.00
915.00
87.60
1150.00
1150.00
87.60

hour

6.60

1200.00

hour
hour

6.00
3.00

700.00
150.00

Hours

6.00

800.00

Tipper -5 Cum
Add 10% of cost of carriage to cover loading and unloading

tonne

4950.00

3.00

Qty = 4950 x 10 / 100 = 495

Paver finisher Mechanical 100 TPH
Vibratory roller 8 to 10 tonne
(C) LABOUR :
Mate
Skilled Beldar
Beldar

tonne
hour
Hours

495.00
6.00
3.90

3.00
1000.00
1550.00

0.48
2.00
10.00

260.00
260.00
247.00
Total:
379794.97

Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

383592.92
Cost for 225.00 Cum
Rate per One Cum:

DSR-12

Rs 1960.59

Page 722 of 2298

Rate as per DSR-12:

Rs 1960.60

Item Code: 16.80

Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383
..
Details of Cost for : 450.00 Cum
Code
Description
Unit
Quantity
Rate
Details of cost for 450 cum (990 tonne)
(A) MATERIAL :
Crushed stone coarse aggregate of 25mm & 12.5 mm nominal
sizes graded as per specifications @ 0.90 cum/cum of
concrete conforming to specification. = 405 cum

0294
0296
0982
0367
2202
2203
2209
0052
0066
0069
0065
0054
0057
0053
0053

Coarse Sand @0.45 m3 per cum of concrete = 203 cum

Cement @150 Kg. per cum of concrete = 67,50 cum
Qty for 0294,0296 codes = 405 / 2 = 202.50 cum
Stone Aggregate (Single size) : 25 mm nominal size
Stone Aggregate (Single size) : 12.5 mm nominal size
Coarse sand (zone III)
Portland Cement
Carraige of Stone aggregate below 40 mm nominal size
Carraige of Coarse sand
Carraige of Cement
(B) MACHINERY :
Front end loader 1 cum bucket capacity (incl POL)
Batching and Mixing Plant @ 75 cum per hour
Generator 250 kVA
Paver finisher Mechanical 100 TPH
Vibratory roller 8 to 10 tonne
Water Tanker 5 to 6 KL capacity
Tipper (990 tonne x 10 km)
Tipper -5 Cum
Add 10% of cost of carriage to cover loading and unloading

cum
cum
cum
tonne
cum
cum
tonne

202.50
202.50
203.00
67.50
405.00
203.00
67.50

1000.00
1050.00
1120.00
5000.00
87.60
87.60
77.87

Hours
hour
hours
hour
Hours
hour

6.00
6.00
6.00
6.00
8.00
8.00

800.00
2500.00
900.00
1000.00
1550.00
150.00

tonne

9900.00

3.00

tonne

990.00

3.00

1.12
6.00
22.00

260.00
260.00
247.00
Total:
1123257.23

Qty = 9900 X * 10/100 = 990

0128
0139
0114

(C) LABOUR :
Mate
Skilled Beldar (for floor rubbing etc.)
Beldar

Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on 1134489.80

Cost for 450.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 2899.25
Rs 2896.15

Item Code: 16.81

Providing and erecting 2.00 metre high temporary barricading at site as per drawing/ direction of Engineer-in-Charge

Code

Details of Cost for : 2.50 m

Description
Unit
Quantity
Details of cost for 2. 5metre (for one no. barricading board of
size 2.50X 2.00 m)

Rate

(A) MATERIAL:

DSR-12

Page 723 of 2298

1681-X

Sub analysis item for material component of Item No. 16.81

2.50

39.07

1681-Y

Sub-analysis item for fabication charges in item no. 16.81

2.50

607.20

11.00

20.72

11.00

53.87

Add water charges @ 1% except on [A]+[B] i.e on

Total:
1615.68

13.050.03

13.061.01

(C) Priming coat

= 2x2.50 x2.00 x 1.10 = 11.00 Sqm.
Applying priming coat : With ready mixed red oxide zinc Sqm
chromate primer on steel galvanise
(D) Painting with synthetic enamel paint
= 2x2.50 x2.00 x 1.10 = 11.00 sqm
Painting with synthetic enamel paint : Two or more coats on Sqm
new work

Add C.P & OH @15% except on [A]+[B] i.e on

1631.84
Cost for 2.50 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1078.84
Rs 1078.65

Item Code: 16.82

Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc. ..

Code
0114
0115
9999

Description
LABOUR:
Beldar
Coolie
Sundries

Details of Cost for : 100.00 m

Unit
Quantity
Day
Day
L.S.

0.75
3.00
2.00

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
929.23

Add C.P & OH @15% on

938.52
Cost for 100.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 10.79
Rs 10.80

Item Code: 16.83

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc.,

Code
0114
0115
9999

Description
LABOUR:
Beldar
Coolie
Sundries

Details of Cost for : 10.00 Sqm

Unit
Quantity
Day
Day
L.S.

0.25
1.00
2.70

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
312.77

Add C.P & OH @15% on

315.90
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 36.33
Rs 36.35

Page 724 of 2298

Item Code: 16.84

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern
over and including 50 mm thick compacted bed of coarse sand ..

Code

0982
2203
0983
2261
0123
0124
0114
0115

Description
MATERIALS:
Bedding layer 50mm thick
Coarse sand (zone III)
Qty = 10 x 0.05 = 0.50 cum
Carraige of Coarse sand
Fine sand (zone IV)
Carraige of Fine sand
LABOUR:
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Beldar
Coolie

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

cum

0.50

1120.00

cum
cum
cum

0.50
0.15
0.15

87.60
640.00
87.60

Day
Day
Day
Day

0.50
0.50
1.00
0.50

301.00
273.00
247.00
247.00
Total:
1370.44

Add water charges @ 1% on

Add C.P & OH @15% on

1384.14
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 159.18
Rs 159.20

Item Code: 16.85

Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement
mortar 1:3 (1 cement : 3 coarse sand),
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
Number of kerb stones =
100 /0.405 = 247 Nos.
Qty. = 247 x 0.40 x 0.375 x 0.20 = 7.41cum
No, of joints = 247 -1 = 246 Nos.
Cement Mortar 1:3 for fixing joints =
246 x [(0.115 + 0.20)/2 x 0.375 x 0.005] = 0.073 cum
03.008
0123
0124
0114
0115

Cement mortar 1:3 (1 cement : 3 coarse sand)

LABOUR:
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Beldar
Coolie

Cum

0.073

4145.53

Day
Day
Day
Day

2.50
2.50
2.50
1.65

301.00
273.00
247.00
247.00
Total:
2762.67

Add water charges @ 1% on

Add C.P & OH @15% on

2790.30
Cost for 100.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 32.09
Rs 32.10

Item Code: 17.1.1

DSR-12

Page 725 of 2298

P/F WC pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level flushing cistern : White Vitreous china
Orissa pattern W.C. pan 580x440mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
1954
WVC Orissa pattern WC pan - 580x440mm
each
1.00
750.00
7358
10 ltr low level PVC flushing cistern with accessories and flush each
1.00
640.00
pipe.
1896
100mm SCI 'P' or 'S' trap with vent horn
each
1.00
308.00
9999
Cement, sand and grit etc.
L.S.
26.91
1.49
9999
Carriage of materials

0116
0123
0114

LABOUR:
Fitter grade-I
Mason I class
Beldar

L.S.

26.91

1.49

Day
Day
Day

1.25
0.50
1.00

301.00
301.00
247.00
Total:
2551.95

Add water charges @ 1% on

Add C.P & OH @15% on

2577.47
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2964.09
Rs 2964.10

Item Code: 17.1.2

P/F WC with PVC low level flushing cistern with all fittings SS Orissa pattern WC pan size 585 x 480 mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost for one pan
MATERIALS
7805
Salem Stainless steel AISI - 304 (18/8) Orrisa
each
1.00
pattern W.C. pan 724mm X 578mm
7358
10 litre low level P.V.C. flushing cistern with fitting accessories each
1.00
and flush pipe
1896
100 mm Sand C.I. P orS trap with vent horn
each
1.00
9999
Cement, sand and grit etc.
L.S.
26.91
9999
Carriage of materials
L.S.
26.91
LABOUR
0116
Fitter 1st class
Day
1.25
0123
Mason 1st class
Day
0.50
0114
Beldar
Day
1.00
Add water charges @ 1% on

Rate

3630.00
640.00
308.00
1.49
1.49
301.00
301.00
247.00
Total:
5431.95

Add C.P & OH @15% on

5486.27
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 6309.21
Rs 6309.20

Item Code: 17.2.1

P/F white vitreous china pedestal type water closet- 10 litre LL white P.V.C. flushing cistern - : W.C. pan white solid plastic seat and
lid
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate

DSR-12

Page 726 of 2298

9999

MATERIALS:
White solid plastic seat and lid with CP B hinges & rubber each
buffer
White glazed pedastal type W.C pan
each
10 ltr low level PVC flushing cistern with accessories and flush each
pipe.
Cement, sand and grit etc.
L.S.
Carriage of materials

0116
0123
0114

LABOUR:
Fitter grade-I
Mason I class
Beldar

1875
1955
7358
9999

1.00

310.00

1.00
1.00

680.00
640.00

26.91

1.49

L.S.

26.91

1.49

Day
Day
Day

1.25
0.50
1.00

301.00
301.00
247.00
Total:
2483.95

Add water charges @ 1% on

Add C.P & OH @15% on

2508.79
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2885.11
Rs 2885.10

Item Code: 17.2.2

P/F white vitreous china pedestal type water closet- 10 litre LL white P.V.C. flushing cistern - : W.C. pan with ISI marked black solid
plastic seat and lid
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
1876
Black solid plastic seat and lid with CP brass hinges, rubber each
1.00
293.00
buffer
1955
White glazed pedastal type W.C pan
each
1.00
680.00
7358
10 ltr low level PVC flushing cistern with accessories and flush each
1.00
640.00
pipe.
9999
Cement, sand and grit etc.
L.S.
26.91
1.49
9999
Carriage of materials

0116
0123
0114

LABOUR:
Fitter grade-I
Mason I class
Beldar

L.S.

26.91

1.49

Day
Day
Day

1.25
0.50
1.00

301.00
301.00
247.00
Total:
2466.95

Add water charges @ 1% on

Add C.P & OH @15% on

2491.62
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2865.36
Rs 2865.35

Item Code: 17.3.1

P/F white vitreous china pedestal type water closet- 10 litre LL white WVC flushing cistern - : W.C. pan with ISI marked white solid
plastic seat and lid
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate

DSR-12

Page 727 of 2298

1875
1955
7006
9999
1350
9999
9999
9999
9999
0116
0123
0114

Details of cost for one pan

MATERIALS
White solid plastic seat and lid with C.P. brass hinges and
rubber buffers complete
White glazed pedestal type W.C. pan
10 litre white glazed vitreous china low level flushing cistern
with fitting and bracket a
Overflow arrangement and specials for oveflow pipe
Mosquito proof coupling of the approved municipal design
Plugs,screws etc.
Red lead, white lead and gasket
Cement, sand and grit etc.
Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

each

1.00

310.00

each
each

1.00
1.00

680.00
1550.00

L.S.
each

62.79
1.00

1.49
27.00

L.S.
L.S.
L.S.
L.S.

13.52
16.12
26.91
26.91

1.49
1.49
1.49
1.49

Day
Day
Day

1.00
1.00
1.00

301.00
301.00
247.00
Total:
3633.92

Add water charges @ 1% on

Add C.P & OH @15% on

3670.26
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 4220.80
Rs 4220.80

Item Code: 17.3.2

P/F white vitreous china pedestal type water closet- 10 litre LL white WVC flushing cistern - : W.C. pan with ISI marked black solid
plastic seat and lid
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one pan
MATERIALS
1876
Black solid plastic seat and lid with C.P. brass hinges and each
1.00
293.00
rubber buffers complete
1955
Vitreous china pedestal type W.C. pan
each
1.00
680.00
7006
10 litre white vitreous china low level flushing cistern with each
1.00
1550.00
fitting and bracket and 40
9999
Overflow arrangement and specials for oveflow pipe
L.S.
62.79
1.49
1350
Mosquito proof coupling of the approved municipal design
each
1.00
27.00
9999
9999
9999
9999
0116
0123
0114

Plugs ,screws etc.

Red lead, white lead and gasket
Cement, sand and grit etc.
Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

L.S.
L.S.
L.S.
L.S.

13.52
16.12
26.91
26.91

1.49
1.49
1.49
1.49

Day
Day
Day

1.00
1.00
1.00

301.00
301.00
247.00
Total:
3616.92

Add water charges @ 1% on

Add C.P & OH @15% on

3653.09
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 4201.05
Rs 4201.05

Page 728 of 2298

Item Code: 17.4.1

P/F WVC flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes One urinal basin with
5 litre white P.V.C. automatic flushing cistern.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one no.
MATERIALS
1913
Flat back or angular lipped front urinal basin of 430x260x350 each
1.00
460.00
mm and 340x410x265 mm sizes
7359
5 litre PVC automatic flushing cistern with fitting
each
1.00
490.00
7375
Standard size G.I. Flush pipe with brass unions and clamps each
1.00
440.00
including C.P. brass spreaders
9999
Red lead, white lead and gasket
L.S.
13.52
1.49
9999
Plugs ,screws etc.
L.S.
13.52
1.49
9999
Cement, sand and grit etc.
L.S.
13.52
1.49
9999
Painting of fittings etc.
L.S.
39.00
1.49
9999
Carriage of materials
L.S.
26.91
1.49
LABOUR
0116
Fitter 1st class
Day
0.88
301.00
0123
Mason 1st class
Day
0.88
301.00
0114
Beldar
Day
1.50
247.00
Total:
Add water charges @ 1% on
2448.89
Add C.P & OH @15% on
2473.38
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2844.39
Rs 2844.40

Item Code: 17.4.2

P/F WVC flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes - automatic flushing
cistern - Range of two urinal basins - 5 litre white PVC tank

Code

1913
7359
7376
9999
9999
9999
9999
9999
0116
0123
0114

Description
Details of cost for one no.
MATERIALS
Flat back or angular lipped front urinal basin of 430x260x350
mm and 340x410x265 mm sizes
5 litre PVC automatic flushing cistern with fitting
Standard size G.I. Flush pipe with brass unions and clamps
including C.P. brass spreaders
Red lead, white lead and gasket
Plugs,screws etc.
Cement, sand and grit etc.
Painting of fittings etc.
Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

2.00

460.00

each
each

1.00
1.00

490.00
1010.00

L.S.
L.S.
L.S.
L.S.
L.S.

20.28
20.28
20.28
39.00
26.91

1.49
1.49
1.49
1.49
1.49

Day
Day
Day

1.50
1.50
2.00

301.00
301.00
247.00
Total:
4005.87

Add water charges @ 1% on

Add C.P & OH @15% on

4045.93
Cost for 1.00 No.

DSR-12

Page 729 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 4652.82
Rs 4652.80

Item Code: 17.4.3

P/F WVC flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes Range of three urinal
basins with 10litre white P.V.C. automatic flushing cistern.

Code

1913
7361
7377
9999
9999
9999
9999
9999
0116
0123
0114

Description
Details of cost for one no.
MATERIALS
Flat back or angular lipped front urinal basin of 430x260x350
mm and 340x410x265 mm sizes
10 litre PVC automatic flushing cistern with fitting
Standard size G.I. Flush pipe with brass unions and clamps
including C.P. brass spreaders
Red lead, white lead and gasket
Plugs ,screws etc.
Cement, sand and grit etc.
Painting of fittings etc.
Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

3.00

460.00

each
each

1.00
1.00

530.00
1240.00

L.S.
L.S.
L.S.
L.S.
L.S.

33.67
33.67
33.67
39.00
40.30

1.49
1.49
1.49
1.49
1.49

Day
Day
Day

2.00
2.00
3.00

301.00
301.00
247.00
Total:
5363.67

Add water charges @ 1% on

Add C.P & OH @15% on

5417.31
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 6229.91
Rs 6229.90

Item Code: 17.4.4

P/F white Vitreous china lip- ped urinal with PVC automatic flushing cistern etc Range of 4 urinal basins with 10 lt PVC cistern

Code
1913
7361
7378
9999
9999
9999
9999
9999
0116
0123
0114

DSR-12

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS
Flat back or angular lipped front urinal basin of 430x260x350
mm and 340x410x265 mm sizes
10 litre PVC automatic flushing cistern with fitting
Standard size G.I. Flush pipe with brass unions and clamps
including C.P. brass spreaders
Red lead, white lead and gasket
Plugs,screws etc.
Cement, sand and grit etc.
Painting of fittings etc.
Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

Rate

each

4.00

460.00

each
each

1.00
1.00

530.00
1800.00

L.S.
L.S.
L.S.
L.S.
L.S.

53.82
53.82
53.82
39.00
53.82

1.49
1.49
1.49
1.49
1.49

Day
Day
Day

3.00
3.00
4.00

Add water charges @ 1% on

301.00
301.00
247.00
Total:
7342.87

Add C.P & OH @15% on

7416.30

Page 730 of 2298

Cost for 1.00 No.

Rate per Each:
Rate as per DSR-12:

Rs 8528.75
Rs 8528.75

Item Code: 17.5.1

P/F white vitreous china flat back half stall urinal with white PVC automatic flushing cistern etc Single half stall with 5 lt PVC cistern

Code
7379
7359
1532
1891
9999
9999
9999
9999
0116
0123
0114

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS
Half stall urinals of white vitreous china with waste fittings
5 litre PVC automatic flushing cistern with fitting
Standard size flush pipe with unions, spreaders and clamps all
in C.P. brass
50 mm diameter standard urinal C.I. Trap with vent arm outlet
grating other couplings in
Red lead, white lead and gasket
Cement, sand and grit etc.
Painting of fittings etc.
Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

Rate

each

1.00

1440.00

each
each

1.00
1.00

490.00
240.00

each

1.00

158.00

L.S.
L.S.
L.S.
L.S.

17.55
26.91
26.00
40.43

1.49
1.49
1.49
1.49

Day
Day
Day

1.75
2.00
4.00

301.00
301.00
247.00
Total:
4609.98

Add water charges @ 1% on

Add C.P & OH @15% on

4656.08
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 5354.49
Rs 5354.50

Item Code: 17.5.2

P/F WVC flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern Range of two half stall urinals
with 5 litre P.V.C. automatic flushing cistern.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one no.
MATERIALS
7379
Two half stall urinals of white vitreous china with waste each
2.00
1440.00
fittings
7359
5 litre PVC automatic flushing cistern with fitting
each
1.00
490.00
1533
Standard size flush pipe with unions, spreaders and clamps all each
1.00
380.00
in C.P. brass
1891
50 mm diameter standard urinal C.I. Trap with vent arm outlet each
1.00
158.00
grating other couplings in C
9999
Red lead, white lead and gasket
L.S.
17.55
1.49
9999
Cement, sand and grit etc.
L.S.
53.82
1.49
9999
Painting of fittings etc.
L.S.
26.00
1.49
9999
Carriage of materials
L.S.
53.82
1.49
LABOUR
0116
Fitter 1st class
Day
2.50
301.00
0123
Mason 1st class
Day
3.00
301.00
0114
Beldar
Day
6.00
247.00
Total:

DSR-12

Page 731 of 2298

Add water charges @ 1% on

7270.77

Add C.P & OH @15% on

7343.48
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 8445.00
Rs 8445.00

Item Code: 17.5.3

P/F WVC flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern Range of three half stall
urinals with 10 litre P.V.C. automatic flushing cistern.

Code

7379
7361
1534
1893
9999
9999
9999
9999
0116
0123
0114

Description
Details of cost for one no.
MATERIALS
Three half stall urinals of white vitreous china with waste
fittings
10 litre PVC automatic flushing cistern with fitting
Standard size flush pipe with unions, spreaders and clamps all
in C.P. brass
80 mm diameter standard urinal C.I. Trap with vent arm outlet
grating other couplings in C
Red lead, white lead and gasket
Cement, sand and grit etc.
Painting of fittings etc.
Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

3.00

1440.00

each
each

1.00
1.00

530.00
490.00

each

1.00

200.00

L.S.
L.S.
L.S.
L.S.

17.55
80.73
26.00
67.21

1.49
1.49
1.49
1.49

Day
Day
Day

3.00
3.50
7.00

301.00
301.00
247.00
Total:
9510.82

Add water charges @ 1% on

Add C.P & OH @15% on

9605.93
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 11046.82
Rs 11046.80

Item Code: 17.5.4

P/F WVC flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern Range of four half stall urinals
with 10 litre P.V.C. automatic flushing cistern.

Code

7379
7361
1535
1893
9999
9999
9999

DSR-12

Description
Details of cost for one no.
MATERIALS
Four half stall urinals of white vitreous china with waste
fittings
10 litre PVC automatic flushing cistern with fitting
Standard size flush pipe with unions, spreaders and clamps all
in C.P. brass
80 mm diameter standard urinal C.I. Trap with vent arm outlet
grating other couplings in C
Red lead, white lead and gasket
Cement, sand and grit etc.
Painting of fittings etc.

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

4.00

1440.00

each
each

1.00
1.00

530.00
570.00

each

1.00

200.00

17.55
107.64
39.00

1.49
1.49
1.49

L.S.
L.S.
L.S.

Page 732 of 2298

9999
0116
0123
0114

Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

L.S.

80.73

1.49

Day
Day
Day

3.50
4.00
8.00

301.00
301.00
247.00
Total:
11658.43

Add water charges @ 1% on

Add C.P & OH @15% on

11775.01
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 13541.26
Rs 13541.25

Item Code: 17.6.1

P/F one piece white vitreous china squatting plate Single squatting plate with 5 lt PVC cistern
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
1915
Squatting plate of white glazed vitreous china
each
1.00
7359
5 litre PVC automatic flushing cistern with fitting
each
1.00
1540
G.I. Flush pipe of standard size with spreaders fittings
each
1.00
9999
Red lead, white lead and gasket
L.S.
17.55
9999
Cement, sand and grit etc.
L.S.
26.91
9999
Painting of fittings etc.
L.S.
26.00
9999
Carriage of materials
L.S.
26.91
LABOUR
0116
Fitter 1st class
Day
1.75
0123
Mason 1st class
Day
0.75
0114
Beldar
Day
3.00
Add water charges @ 1% on

Rate
740.00
490.00
170.00
1.49
1.49
1.49
1.49
301.00
301.00
247.00
Total:
3038.59

Add C.P & OH @15% on

3068.98
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 3529.33
Rs 3529.35

Item Code: 17.6.2

P/F one piece white vitreous china squatting plate Range of 2 squatting plates with 5 lt PVC cistern
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
1915
Squatting plate of white glazed vitreous china
each
2.00
7359
5 litre PVC automatic flushing cistern with fitting
each
1.00
1541
G.I. Flush pipe of standard size with spreaders fittings
each
1.00
9999
Red lead, white lead and gasket
L.S.
17.55
9999
Cement, sand and grit etc.
L.S.
53.82
9999
Painting of fittings etc.
L.S.
26.00
9999
Carriage of materials
L.S.
33.15
LABOUR
0116
Fitter 1st class
Day
2.50
0123
Mason 1st class
Day
1.00
0114
Beldar
Day
4.00
Add water charges @ 1% on

DSR-12

Rate
740.00
490.00
230.00
1.49
1.49
1.49
1.49
301.00
301.00
247.00
Total:
4435.97

Page 733 of 2298

Add C.P & OH @15% on

4480.33
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 5152.38
Rs 5152.40

Item Code: 17.6.3

P/F one piece white vitreous china squatting plate Range of 3 squatting plates with 10 lt PVC cistern
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1915
Vitreous china squatting plate urinal
each
3.00
7361
P.V.C. automatic flushing cistern 10 lts capacity
each
1.00
1542
Flush pipe and spreaders G.I.for range of three squatting each
1.00
plates urinal
9999
Red lead, white lead and gasket
L.S.
17.55
9999
Cement, sand and grit etc
L.S.
80.73
9999
Painting of fittings
L.S.
26.00
9999
Carriage of materilas
L.S.
42.12
LABOUR:
0116
Fitter (grade 1)
Day
3.00
0123
Mason (brick layer) 1st class
Day
1.50
0114
Beldar
Day
5.00
Add water charges @ 1% on

Rate
740.00
530.00
290.00
1.49
1.49
1.49
1.49
301.00
301.00
247.00
Total:
5877.44

Add C.P & OH @15% on

5936.21
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 6826.64
Rs 6826.65

Item Code: 17.6.4

P/F one piece white vitreous china squatting plate Range of 4 squatting plate with 10 lt PVC cistern
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1915
Vitreous china squatting plate urinal
each
4.00
1543
Flush pipe and spreaders G.I.for range of four squatting plates each
1.00
urinal
7361
P.V.C. automatic flushing cistern 10 lts capacity
each
1.00
9999
Red lead, white lead and gasket
L.S.
17.55
9999
Cement , sand and grit
L.S.
107.64
9999
Painting of fittings
L.S.
26.00
9999
Carriage of materials
L.S.
69.03
LABOUR:
0116
Fitter (grade 1)
Day
3.50
0123
Mason (brick layer) 1st class
Day
1.75
0114
Beldar
Day
5.50
Add water charges @ 1% on

Rate
740.00
365.00
530.00
1.49
1.49
1.49
1.49
301.00
301.00
247.00
Total:
7121.87

Add C.P & OH @15% on

7193.09
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 8272.05
Rs 8272.05

Page 734 of 2298

Item Code: 17.7.1

P/F wash basin with all fittings White vitreous china Wash basin 630x450mm with a pair of 15mm CP brass pillar taps

Code

1947
1885
1951
1309
9999
9999
9999
9999
0116
0123
0114

Description
Details of cost for one no.
MATERIALS
630x450 mm flat back wash basin of white
vitreous china
15 mm C.P. brass piller taps
32 mm diameter C.P. brass waste of standard
pattern
C.I./M.S. brackets
Red lead, white lead and gasket
Cement, sand and grit etc.
Painting of brackets, fittings etc.
Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

1.00

675.00

each
each

2.00
1.00

170.00
55.00

pair
L.S.
L.S.
L.S.
L.S.

1.00
16.12
13.39
26.91
13.52

53.00
1.49
1.49
1.49
1.49

Day
Day
Day

0.33
0.33
0.67

301.00
301.00
247.00
Total:
1591.36

Add water charges @ 1% on

Add C.P & OH @15% on

1607.27
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1848.36
Rs 1848.35

Item Code: 17.7.2

P/F wash basin with C.I. brackets, 15 mm C.P. brass pillar taps... White Vitreous China Wash basin size 630x450 mm with a single 15
mm C.P. brass pillar tap.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
1947
630X450mm flat back wash basin -WVC
each
1.00
675.00
1885
CP brass pillar tap - 15mm
each
1.00
170.00
1951
32mm dia CP brass waste
each
1.00
55.00
1309
CI brackets
pair
1.00
53.00
9999
Red lead, white lead and gasket
L.S.
16.12
1.49
9999
Cement, sand and grit etc.
L.S.
13.39
1.49
9999
Painting of brackets, fittings etc.
L.S.
26.91
1.49
9999
Carriage of materials
L.S.
13.52
1.49
LABOUR:
0116
Fitter grade-I
Day
0.30
301.00
0123
Mason I class
Day
0.33
301.00
0114
Beldar
Day
0.63
247.00
Total:
Add water charges @ 1% on
1402.45
Add C.P & OH @15% on
1416.47
Cost for 1.00 No.

DSR-12

Page 735 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 1628.94
Rs 1628.95

Item Code: 17.7.3

P/F wash basin with C.I. brackets, 15 mm C.P. brass pillar taps... White Vitreous China Wash basin size 550x400 mm with a pair of
15 mm C.P. brass pillar taps.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS
3229
550x400 mm flat back wash basin of white
each
1.00
530.00
vitreous china
1885
15 mm C.P. brass piller taps
each
2.00
170.00
1951
32 mm diameter C.P. brass waste of standard
each
1.00
55.00
pattern
1309
C.I./M.S. brackets
pair
1.00
53.00
9999
Red lead, white lead and gasket
L.S.
16.12
1.49
9999
Cement, sand and grit etc.
L.S.
13.39
1.49
9999
Painting of brackets, fittings etc.
L.S.
26.91
1.49
9999
Carriage of materials
L.S.
13.52
1.49
LABOUR
0116
Fitter 1st class
Day
0.33
301.00
0123
Mason 1st class
Day
0.33
301.00
0114
Beldar
Day
0.67
247.00
Total:
Add water charges @ 1% on
1446.36
Add C.P & OH @15% on
1460.82
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1679.94
Rs 1679.95

Item Code: 17.7.4

P/F wash basin with C.I. brackets, 15 mm C.P. brass pillar taps... White Vitreous China Flat back wash basin size 550x400 mm with
single 15 mm C.P. brass pillar tap.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
3229
White vitreous china wash basin - Flat back - 550x400mm
each
1.00
530.00
1885
1951
1309
9999

CP brass pillar tap - 15mm

32mm dia CP brass waste
CI brackets
Red lead, white lead and gasket

9999
9999
9999

Cement, sand and grit etc.

Painting of brackets, fittings etc.
Carriage of materials

0116
0123
0114

LABOUR:
Fitter grade-I
Mason I class
Beldar

each
each
pair

1.00
1.00
1.00

170.00
55.00
53.00

L.S.
L.S.
L.S.

16.12
13.39
26.91

1.49
1.49
1.49

L.S.

13.52

1.49

Day
Day
Day

0.30
0.33
0.63

301.00
301.00
247.00
Total:
1257.45

Add water charges @ 1% on

Add C.P & OH @15% on

1270.02
Cost for 1.00 No.

DSR-12

Page 736 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 1460.52
Rs 1460.50

Item Code: 17.7.5

P/F wash basin with all fittings White vitreous china angle back 600x480mm with single 15mm CP brass pillar tap

Code
1949
1885
1951
1309
9999
9999
9999
9999
0116
0123
0114

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS
600x480 mm angle back wash basin of white vitreous china
15 mm C.P. brass piller taps
32 mm diameter C.P. brass waste of standard pattern
C.I./M.S. brackets
Red lead, white lead and gasket
Cement, sand and grit etc.
Painting of brackets, fittings etc.
Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

Rate

each

1.00

580.00

each
each
pair
L.S.
L.S.
L.S.
L.S.

1.00
1.00
1.00
16.12
13.39
26.91
13.52

170.00
55.00
53.00
1.49
1.49
1.49
1.49

Day
Day
Day

0.30
0.33
0.63

301.00
301.00
247.00
Total:
1307.45

Add water charges @ 1% on

Add C.P & OH @15% on

1320.52
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1518.60
Rs 1518.60

Item Code: 17.7.6

P/F wash basin with all fittings White vitreous china angle back 400x400mm with single 15mm CP brass pillar tap

Code
1950
1885
1951
1309
9999
9999
9999
9999
0116
0123
0114

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS
400x400 mm angle back wash basin of white vitreous china
15 mm C.P. brass piller taps
32 mm diameter C.P. brass waste of standard pattern
C.I./M.S. brackets
Red lead, white lead and gasket
Cement, sand and grit etc.
Painting of brackets, fittings etc.
Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

Rate

each

1.00

405.00

each
each
pair
L.S.
L.S.
L.S.
L.S.

1.00
1.00
1.00
16.12
13.39
26.91
13.52

170.00
55.00
53.00
1.49
1.49
1.49
1.49

Day
Day
Day

0.30
0.33
0.63

301.00
301.00
247.00
Total:
1132.45

Add water charges @ 1% on

Add C.P & OH @15% on

1143.77
Cost for 1.00 No.
Rate per Each:

DSR-12

Rs 1315.34

Page 737 of 2298

Rate as per DSR-12:

Rs 1315.35

Item Code: 17.7.7

P/F wash basin with all fittings White vitreous china Flat back wash basin 450x300mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
7004
450x300 mm angle back wash basin of white vitreous china
each
1.00

425.00

1885
1951
1309
9999
9999
9999
9999
0116
0123
0114

15 mm C.P. brass piller taps

32 mm diameter C.P. brass waste of standard pattern
C.I./M.S. brackets
Red lead, white lead and gasket
Cement, sand and grit etc.
Painting of brackets, fittings etc.
Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

Rate

each
each
pair
L.S.
L.S.
L.S.
L.S.

1.00
1.00
1.00
16.12
13.39
26.91
13.52

170.00
55.00
53.00
1.49
1.49
1.49
1.49

Day
Day
Day

0.30
0.33
0.63

301.00
301.00
247.00
Total:
1152.45

Add water charges @ 1% on

Add C.P & OH @15% on

1163.97
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1338.57
Rs 1338.55

Item Code: 17.7.8

P/F wash basin with all fittings White vitreous china Surgeon type wash basin of 660x460mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
3213
660x460 mm Surgeon type wash basin of white vitreous china each
1.00

995.00

7363
1951
1309
9999
9999
9999
9999
0116
0123
0114

15 mm C.P. brass piller taps (elbow operated lever)

32 mm diameter C.P. brass waste of standard pattern
C.I./M.S. brackets
Red lead, white lead and gasket
Cement, sand and grit etc.
Painting of brackets, fittings etc.
Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

Rate

each
each
pair
L.S.
L.S.
L.S.
L.S.

2.00
1.00
1.00
16.12
13.39
26.91
13.52

600.00
55.00
53.00
1.49
1.49
1.49
1.49

Day
Day
Day

0.33
0.33
0.67

301.00
301.00
247.00
Total:
2771.36

Add water charges @ 1% on

Add C.P & OH @15% on

2799.07
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 3218.93
Rs 3218.95

Item Code: 17.7.9

DSR-12

Page 738 of 2298

P/F wash basin with all fittings White vitreous china Surgeon type wash basin of 660x460mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
3213
660x460 mm Surgeon type wash basin of white vitreous china each
1.00

995.00

7363
1951
1309
9999
9999
9999
9999
0116
0123
0114

15 mm C.P. brass piller taps (elbow operated lever)

32 mm diameter C.P. brass waste of standard pattern
C.I./M.S. brackets
Red lead, white lead and gasket
Cement, sand and grit etc.
Painting of brackets, fittings etc.
Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

Rate

each
each
pair
L.S.
L.S.
L.S.
L.S.

1.00
1.00
1.00
16.12
13.39
26.91
13.52

600.00
55.00
53.00
1.49
1.49
1.49
1.49

Day
Day
Day

0.30
0.33
0.63

301.00
301.00
247.00
Total:
2152.45

Add water charges @ 1% on

Add C.P & OH @15% on

2173.97
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2500.07
Rs 2500.05

Item Code: 17.7.10

P/F wash basin with all fittings SS round basin 405x355mm with single 15 mm CP brass pillar tap
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
7806
Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X each
1.00
355mm
1885
15 mm C.P. brass piller taps
each
1.00
1951
32 mm diameter C.P. brass waste of standard pattern
each
1.00
1309
C.I./M.S. brackets
pair
1.00
9999
Red lead, white lead and gasket
L.S.
16.12
9999
Cement, sand and grit etc.
L.S.
13.39
9999
Painting of brackets, fittings etc.
L.S.
26.91
9999
Carriage of materials
L.S.
13.52
LABOUR
0116
Fitter 1st class
Day
0.30
0123
Mason 1st class
Day
0.33
0114
Beldar
Day
0.63
Add water charges @ 1% on

Rate
1690.00
170.00
55.00
53.00
1.49
1.49
1.49
1.49
301.00
301.00
247.00
Total:
2417.45

Add C.P & OH @15% on

2441.62
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2807.86
Rs 2807.85

Item Code: 17.7.11

P/F wash basin with all fittings SS wash basin 530x345 mm with single 15 mm CP brass pillar tap
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS

DSR-12

Rate

Page 739 of 2298

7807
1885
1951
1309
9999
9999
9999
9999
0116
0123
0114

Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X each
345mm
15 mm C.P. brass piller taps
each
32 mm diameter C.P. brass waste of standard pattern
each
C.I./M.S. brackets
pair
Red lead, white lead and gasket
L.S.
Cement, sand and grit etc.
L.S.
Painting of brackets, fittings etc.
L.S.
Carriage of materials
L.S.
LABOUR
Fitter 1st class
Day
Mason 1st class
Day
Beldar
Day

1.00

1470.00

1.00
1.00
1.00
16.12
13.39
26.91
13.52

170.00
55.00
53.00
1.49
1.49
1.49
1.49

0.30
0.33
0.63

301.00
301.00
247.00
Total:
2197.45

Add water charges @ 1% on

Add C.P & OH @15% on

2219.42
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2552.33
Rs 2552.35

Item Code: 17.8

P/F white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Code

Description

1396
9999

MATERIALS:
White vitreous china pededstal for wash basin
White cement mortar

9999

Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

1.00

650.00

L.S.

40.30

1.49

L.S.

40.43

1.49
Total:
770.29

Add water charges @ 1% on

Add C.P & OH @15% on

777.99
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 894.69
Rs 894.70

Item Code: 17.9.1

P/F kitchen sink with C.I. brackets, White glazed fire clay kit.sink of size 600x450x250 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
1863
White glazed fire clay kitchen sink of size
each
1.00
600x450x250 mm
1309
C.I. Bracket
pair
1.00
1315
C.P. brass chain with 40 mm rubber plug
each
1.00
1952
40 mm C.P. brass waste
each
1.00
9999
Red lead, white lead and gasket
L.S.
16.12
9999
Cement, sand and grit etc.
L.S.
13.39
9999
Painting brackets etc.
L.S.
26.91
9999
Carriage of materials
L.S.
13.52
LABOUR
0116
Fitter 1st class
Day
0.22

DSR-12

Rate
1350.00
53.00
27.00
62.00
1.49
1.49
1.49
1.49
301.00

Page 740 of 2298

0123
0114

Mason 1st class

Beldar

Day
Day

0.33
0.56

Add water charges @ 1% on

301.00
247.00
Total:
1900.08

Add C.P & OH @15% on

1919.08
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2206.94
Rs 2206.95

Item Code: 17.10.1.1

P/F kitchen sink with C.I. brackets, Kitchen sink with drain board 510x1040 mm bowl depth 250mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
7095
Stainles steel kitchen sink - with drain board bowl depth
250mm
each
1.00
1309
CI brackets
pair
2.00
9999
Cement, sand and grit etc.
L.S.
27.04
9999
Painting brackets etc.
L.S.
26.91
9999
Carriage of materials
L.S.
13.52
LABOUR:
0116
Fitter grade-I
Day
0.22
0123
Mason I class
Day
0.60
0114
Beldar
Day
0.82
Add water charges @ 1% on

Rate

5150.00
53.00
1.49
1.49
1.49
301.00
301.00
247.00
Total:
5805.89

Add C.P & OH @15% on

5863.95
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 6743.54
Rs 6743.55

Item Code: 17.10.1.2

P/F Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets Kitchen sink with drain board 510x1040 mm bowl
depth 225mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7096
Stainles steel kitchen sink - with drain board 510x1040 bowl
depth 225 mm
each
1.00
4900.00
1309
CI brackets
pair
2.00
53.00
9999
Cement, sand and grit etc.
L.S.
27.04
1.49
9999
Painting brackets
L.S.
26.91
1.49
9999
Carriage of materials
L.S.
13.52
1.49
LABOUR:
0116
Fitter grade-I
Day
0.22
301.00
0123
Mason I class
Day
0.60
301.00

DSR-12

Page 741 of 2298

0114

Beldar

Day

0.82

Add water charges @ 1% on

247.00
Total:
5555.89

Add C.P & OH @15% on

5611.45
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 6453.17
Rs 6453.15

Item Code: 17.10.1.3

P/F stainless steel kitchen sink with fittings with drain board 510x1040 bowl depth 200mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
7097
Stainlees steel kitchen sink - with drain board 510 x 1040mm each
1.00
bowl depth 200 mm.
1309
C.I. Brackets
pair
2.00
9999
Cement, sand and grit etc.
L.S.
27.04
9999
Painting brackets
L.S.
26.91
9999
Carriage of materials
L.S.
13.52
LABOUR
0116
Fitter 1st class
Day
0.22
0123
Mason 1st class
Day
0.60
0114
Beldar
Day
0.82
Add water charges @ 1% on

Rate
4200.00
53.00
1.49
1.49
1.49
301.00
301.00
247.00
Total:
4855.89

Add C.P & OH @15% on

4904.45
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 5640.12
Rs 5640.10

Item Code: 17.10.1.4

P/F stainless steel kitchen sink with fittings with drain board 400x915 bowl depth 178mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
7098
Stainless steel kitchen sink - with drain board 510xl040mm each
1.00
bowl depth 178 mm
1309
C.I. Brackets
pair
2.00
9999
Cement, sand and grit etc.
L.S.
27.04
9999
Painting brackets
L.S.
26.91
9999
Carriage of materials
L.S.
13.52
LABOUR
0116
Fitter 1st class
Day
0.22
0123
Mason 1st class
Day
0.60
0114
Beldar
Day
0.82
Add water charges @ 1% on

Rate
2900.00
53.00
1.49
1.49
1.49
301.00
301.00
247.00
Total:
3555.89

Add C.P & OH @15% on

3591.45
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 4130.17
Rs 4130.15

Page 742 of 2298

Item Code: 17.10.2.1

P/F Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets Kitchen sink without drain board 610x510 mm
bowl depth 200 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7101
Stainless steel kitchen sink-without drain board 610x510 bowl
depth 200 mm
each
1.00
2950.00
1309
CI brackets
pair
1.00
53.00
9999
Cement, sand and grit etc.
L.S.
13.52
1.49
9999
Painting brackets
L.S.
26.91
1.49
9999
Carriage of materials
L.S.
13.52
1.49
0116
Fitter grade-I
Day
0.22
301.00
LABOUR:
0123
Mason I class
Day
0.33
301.00
0114
Beldar
Day
0.56
247.00
Total:
Add water charges @ 1% on
3387.25
Add C.P & OH @15% on
3421.12
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 3934.29
Rs 3934.30

Item Code: 17.10.2.2

P/F Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets Kitchen sink without drain board 610x460 mm
bowl depth 200 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS
7102
Stainless steel kitchen sink - without drain board 610x460mm each
1.00
2750.00
bowl depth 178 mm
1309
C.I. Brackets
pair
1.00
53.00
9999
Cement, sand and grit etc.
L.S.
13.52
1.49
9999
Painting brackets
L.S.
26.91
1.49
9999
Carriage of materials
L.S.
13.52
1.49
LABOUR
0116
Fitter 1st class
Day
0.22
301.00
0123
Mason 1st class
Day
0.33
301.00
0114
Beldar
Day
0.56
247.00
Total:
Add water charges @ 1% on
3187.25
Add C.P & OH @15% on
3219.12
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 3701.99
Rs 3702.00

Item Code: 17.10.2.3

P/F stainless steel kitchen sink with fittings Without drain board : 470X420 BOWL DEPTH 178MM
Details of Cost for : 1.00 No.

DSR-12

Page 743 of 2298

Code
7103
1309
9999
9999
9999

0116
0123
0114

Description
Unit
MATERIALS:
Stainless steel kitchen sink - without drain board 470x420mm each
bowl depth 178mm
C.I. brackets
pair
Cement, sand and grit etc.
L.S.
Painting brackets
L.S.
Carriage of materials
L.S.
LABOUR :
Fitter (grade 1)
Day
Mason (brick layer) 1st class
Day
Beldar
Day

Quantity

Rate

1.00

2050.00

1.00

53.00

13.52

1.49

26.91

1.49

13.52

1.49

0.22
0.33
0.56

301.00
301.00
247.00
Total:
2487.25

Add water charges @ 1% on

Add C.P & OH @15% on

2512.12
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2888.94
Rs 2888.95

Item Code: 17.11.1

P/F white vitreous china laboratory sink : 450 x 300 x 150 mm.
Code
1871
1309
1315
1952
1895
3617
9999
9999
9999
9999
0116
0123
0114

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS
White vitreous china laboratory sink of size 450x300x150 mm each
C.I. bracket for wash basin and sinks
C.P. brass chain with 40 mm rubber plug
C.P. brass waste 40 mm
40 mm C.P. brass trap
40 mm C.P. brass union
Red lead, white lead and gaskit
Cement, sand and grit etc.
Sundries
Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

Rate

1.00

820.00

pair
each
each
each
each
L.S.
L.S.
L.S.
L.S.

1.00
1.00
1.00
1.00
1.00
16.12
13.39
26.91
13.52

53.00
27.00
62.00
125.00
175.00
1.49
1.49
1.49
1.49

Day
Day
Day

0.22
0.33
0.56

301.00
301.00
247.00
Total:
1670.08

Add water charges @ 1% on

Add C.P & OH @15% on

1686.78
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1939.80
Rs 1939.80

Item Code: 17.11.2

P/F WVC laboratory sink with C.I. brackets,.. Size 600x450x200mm
Code

Description

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

Details of cost for one no

DSR-12

Page 744 of 2298

1872
1309
1315
1952
1895
3617
9999
9999
9999
9999
0116
0123
0114

MATERIALS
White vitreous china laboratory sink of size 600x450x200 mm each
C.I. bracket for wash basin and sinks
C.P. brass chain with 40 mm rubber plug
C.P. brass waste 40 mm
40mm C.P. brass trap
C.P. brass union, 40mm dia
Red lead, white lead and gaskit
Cement, sand and grit etc.
Sundries
Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

1.00

1525.00

pair
each
each
each
each
L.S.
L.S.
L.S.
L.S.

1.00
1.00
1.00
1.00
1.00
16.12
13.39
26.91
13.52

53.00
27.00
62.00
125.00
175.00
1.49
1.49
1.49
1.49

Day
Day
Day

0.22
0.33
0.56

301.00
301.00
247.00
Total:
2375.08

Add water charges @ 1% on

Add C.P & OH @15% on

2398.83
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2758.65
Rs 2758.65

Item Code: 17.12.1

P/F draining board with CI brackets White glazed fire clay drai- ning board 600x450x25mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
7364
White glazed fire clay draining board of size 600x450x25 mm each
1.00
1309
9999
9999
9999
0116
0123
0114

C.I./M.S. Brackets
Cement, sand and grit etc.
Painting brackets etc.
Carriage of materials
LABOUR
Fitter 1st class
Mason 1st class
Beldar

Rate
525.00

pair
L.S.
L.S.
L.S.

1.00
13.39
26.00
7.80

53.00
1.49
1.49
1.49

Day
Day
Day

0.06
0.17
0.22

301.00
301.00
247.00
Total:
771.88

Add water charges @ 1% on

Add C.P & OH @15% on

779.60
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 896.54
Rs 896.55

Item Code: 17.13.1

P/F WVC W.C.squatting pan (Indian type) Long pattern W.C. pan of size 580 mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1953
WVC long pattern WC pan
each
1.00
9999
Cement, sand and grit etc.
L.S.
13.39
9999
Carriage of materials

DSR-12

Rate
340.00
1.49

Page 745 of 2298

0123
0114

LABOUR:
Mason I class
Beldar

L.S.

13.52

1.49

Day
Day

0.50
0.50

301.00
247.00
Total:
654.09

Add water charges @ 1% on

Add C.P & OH @15% on

660.63
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 759.72
Rs 759.70

Item Code: 17.13.2

P/F WVC W.C.squatting pan (Indian type) Long pattern Orissa pattern W.C. pan of size 580x440 mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1954
Vitreous china orrisa type w.c. pan size 580 mm
each
1.00
9999
Cement, sand and grit etc.
L.S.
13.39
9999
Carriage of materials
L.S.
13.52
LABOUR:
0123
Mason I class
Day
0.50
0114
Beldar
Day
0.50
Add water charges @ 1% on

Rate
750.00
1.49
1.49
301.00
247.00
Total:
1064.09

Add C.P & OH @15% on

1074.73
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1235.94
Rs 1235.95

Item Code: 17.14.1

Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
7104
Coloured Orissa pattern W.C. pan 580x440 mm
each
1.00
1954
WVC Orissa pattern WC pan - 580x440mm
each
-1.00
Add water charges @ 1% on

Rate
1275.00
750.00
Total:
525.00

Add C.P & OH @15% on

530.25
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 609.79
Rs 609.80

Item Code: 17.15

P/F WVC W.C.pedestal type (European type/ wash down type) water closet pan.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1955
White glazed pedastal type W.C pan
each
1.00

DSR-12

Rate
680.00

Page 746 of 2298

9999

Cement, sand and grit etc.

9999

Carriage of materials

0123
0114

LABOUR:
Mason I class
Beldar

L.S.

13.39

1.49

L.S.

13.52

1.49

Day
Day

0.50
0.50

301.00
247.00
Total:
994.09

Add water charges @ 1% on

Add C.P & OH @15% on

1004.03
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1154.63
Rs 1154.65

Item Code: 17.16

Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous
china W.C pan and cistern.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS
7105
Coloured (European type) W.C. pan
each
1.00
1080.00
1955
White (European type) W.C. pan
each
-1.00
680.00
7106
Coloured low level cistern
each
1.00
1500.00
7005
White vitreous china low level flushing cistern
each
-1.00
890.00
Total:
Add water charges @ 1% on
1010.00
Add C.P & OH @15% on
1020.10
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1173.12
Rs 1173.10

Item Code: 17.17.1

P/F a pair of WVC foot rests of standard pattern for squatting panW.C. 250x130x30 mm
Details of Cost for : 1.00 pairs
Code
Description
Unit
Quantity
MATERIALS:
1363
Vitreous china foot rests 250x130x30 mm
pair
1.00
9999
Cement, sand including carriage of materials
L.S.
8.06
LABOUR:
0123
Mason I class
Day
0.06
Add water charges @ 1% on

Rate

90.00
1.49
301.00
Total:
120.07

Add C.P & OH @15% on

121.27
Cost for 1.00 pairs
Rate per Each Pair:
Rate as per DSR-12:

Rs 139.46
Rs 139.45

Item Code: 17.17.2

P/F a pair of WVC foot rests of standard pattern for squatting panW.C. 250x125x25 mm

DSR-12

Page 747 of 2298

Code

Description

1970

MATERIALS:
Vitreous china foot rests 250x125x30 mm

9999

Cement, sand including carriage of materials

0123

LABOUR:
Mason I class

Details of Cost for : 1.00 pairs

Unit
Quantity

Rate

pair

1.00

100.00

L.S.

8.06

1.49

Day

0.06

301.00
Total:
130.07

Add water charges @ 1% on

Add C.P & OH @15% on

131.37
Cost for 1.00 pairs
Rate per Each Pair:
Rate as per DSR-12:

Rs 151.08
Rs 151.10

Item Code: 17.18.1

P/F P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and
fixtures complete. 10 litre capacity - White
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7358
10 ltr low level PVC flushing cistern with accessories and flush each
1.00
640.00
pipe.
9999
Carriage of materials
L.S.
5.20
1.49
LABOUR:
0116
Fitter grade-I
Day
0.125
301.00
0114
Beldar
Day
0.125
247.00
Total:
Add water charges @ 1% on
716.26
Add C.P & OH @15% on
723.42
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 831.93
Rs 831.90

Item Code: 17.18.2

P/F P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and
fixtures complete. 10 litre capacity - col
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS
7123
Controlled flush cistern with accessories
each
1.00
685.00
9999
Carriage of materials
L.S.
7.02
1.49
LABOUR
(Considering 1 fitter and 1 beldar can fix 8 cistern in one day)
0116
0114

Fitter 1 st class
Beldar

Day
Day

0.125
0.125

Add water charges @ 1% on

301.00
247.00
Total:
763.97

Add C.P & OH @15% on

771.61
Cost for 1.00 No.

DSR-12

Page 748 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 887.35
Rs 887.35

Item Code: 17.19.1

P/F controlled flush,low level cistern made of vitreous china with all fittings 10 lt (full flush) capacity - white

Code
7126
9999
0116
0114

Description
MATERIALS
Controlled flush cistern with accessories
Carriage of materials
LABOUR
Fitter 1st class
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each
L.S.

1.00
13.52

975.00
1.49

Day
Day

0.50
0.50

301.00
247.00
Total:
1269.14

Add water charges @ 1% on

Add C.P & OH @15% on

1281.83
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1474.10
Rs 1474.10

Item Code: 17.19.2

P/F controlled flush,low level cistern made of vitreous china with all fittings 10 lt (full flush) capacity - coloured

Code
7127
9999
0116
0114

Description
MATERIALS
Controlled flush cistern with accessories
Carriage of materials
LABOUR
Fitter 1 st class
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each
L.S.

1.00
13.52

1400.00
1.49

Day
Day

0.50
0.50

301.00
247.00
Total:
1694.14

Add water charges @ 1% on

Add C.P & OH @15% on

1711.08
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1967.74
Rs 1967.75

Item Code: 17.20.1

P/F solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1875
White solid plastic seat and lid with CP B hinges & rubber each
1.00
buffer
9999
Carriage of materials and fixing charges
L.S.
13.39

DSR-12

Rate
310.00

Add water charges @ 1% on

1.49
Total:
329.95

Add C.P & OH @15% on

333.25

Page 749 of 2298

Cost for 1.00 No.

Rate per Each:
Rate as per DSR-12:

Rs 383.24
Rs 383.25

Item Code: 17.20.2

P/F solid plastic seat with lid for pedestal type W.C. pan complete : Black solid plastic seat with lid
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1876
Black plastic seat (solid) with lid C.P.brass hinges and rubber each
1.00
buffers
9999
Carriage of materials and fixing charges
L.S.
13.39
Add water charges @ 1% on

Rate
293.00

1.49
Total:
312.95

Add C.P & OH @15% on

316.08
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 363.49
Rs 363.50

Item Code: 17.20.3

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete - Coloured (other than black & white) solid
plastic seat with lid
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7107
Coloured (other than black) solid P.V.C. seat in European W.C. each
1.00
475.00
pan
9999
Carriage and fixing charges
L.S.
13.39
1.49
Total:
Add water charges @ 1% on
494.95
Add C.P & OH @15% on
499.90
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 574.89
Rs 574.90

Item Code: 17.22

P/F GI inlet connection for flush pipe
Code
1614
9999

Description
MATERIALS
G.I. Inlet connection
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
13.39

Add water charges @ 1% on

Rate
61.00
1.49
Total:
80.95

Add C.P & OH @15% on

81.76
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 94.02
Rs 94.00

Page 750 of 2298

Item Code: 17.23

P/F WVC flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively.

Code
1913
9999

0116
0114

Details of Cost for : 1.00 No.

Unit
Quantity

Description

MATERIALS:
WVC urinal basin - Flat back (430x260x350mm) / Angular each
(340x410x265 mm)
Carriage of materials
L.S.
LABOUR:
Fitter grade-I
Day
Beldar
Day

Rate

1.00

460.00

9.49

1.49

0.38
0.38

301.00
247.00
Total:
682.38

Add water charges @ 1% on

Add C.P & OH @15% on

689.20
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 792.58
Rs 792.60

Item Code: 17.24

P/F white vitreous china squatting plate urinal.
Code
1915
9999
9999
0116
0123
0114

Details of Cost for : 1.00 No.

Unit
Quantity

Description

MATERIALS
Squatting plate urinal of white vitreous china with integral each
longitudinal flush pipe
Cement, sand and grit etc.
L.S.
Carriage of materials
L.S.
LABOUR
Fitter 1st class
Day
Mason 1st class
Day
Beldar
Day

Rate

1.00

740.00

10.79
13.39

1.49
1.49

0.50
0.50
1.00

301.00
301.00
247.00
Total:
1324.03

Add water charges @ 1% on

Add C.P & OH @15% on

1337.27
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1537.86
Rs 1537.85

Item Code: 17.25.1

P/F WVC wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450mm.

Code
1947
9999
9999

DSR-12

Description
MATERIALS
White vitreous china flat back wash basin 630x450 mm
Fixing charges
Carriage of materials

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.
L.S.

1.00
53.82
9.49

Rate

Add water charges @ 1% on

675.00
1.49
1.49
Total:
769.33

Add C.P & OH @15% on

777.02

Page 751 of 2298

Cost for 1.00 No.

Rate per Each:
Rate as per DSR-12:

Rs 893.57
Rs 893.55

Item Code: 17.25.2

P/fF WVC wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400mm.

Code
3229
9999
9999

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS
White vitreous china flat back wash basin 550x400 mm
Fixing charges
Carriage of materials

each
L.S.
L.S.

1.00
53.82
9.49

Add water charges @ 1% on

Rate
530.00
1.49
1.49
Total:
624.33

Add C.P & OH @15% on

630.57
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 725.16
Rs 725.15

Item Code: 17.25.3

P/F white vitreous china wash basin : Angle back wash basin 600 x 480 mm.
Code

Details of Cost for : 1.00 No.

Unit
Quantity

Description

1949

MATERIALS
White vitreous china angle flat back wash basin 600x480 mm each

9999
9999

Fixing charges
Carriage of materials

L.S.
L.S.

Rate

1.00

580.00

53.82
9.49

1.49
1.49
Total:
674.33

Add water charges @ 1% on

Add C.P & OH @15% on

681.07
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 783.23
Rs 783.25

Item Code: 17.25.4

P/F white vitreous china wash basin : Angle back wash basin 400 x 400 mm.
Code

Description

Details of Cost for : 1.00 No.

Unit
Quantity

1950

MATERIALS
White vitreous china angle flat back wash basin 400x400 mm each

9999
9999

Fixing charges
Carriage of materials

L.S.
L.S.

Rate

1.00

405.00

53.82
9.49

1.49
1.49
Total:
499.33

Add water charges @ 1% on

Add C.P & OH @15% on

504.32
Cost for 1.00 No.
Rate per Each:

DSR-12

Rs 579.97

Page 752 of 2298

Rate as per DSR-12:

Rs 579.95

Item Code: 17.25.5

P/F white vitreous china wash basin : Flat back wash basin 450 x 300 mm.
Code
7004
9999
9999

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS
White vitreous china flat back wash basin 450x300 mm
Fixing charges
Carriage of materials

each
L.S.
L.S.

1.00
53.82
9.49

Add water charges @ 1% on

Rate
425.00
1.49
1.49
Total:
519.33

Add C.P & OH @15% on

524.52
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 603.20
Rs 603.20

Item Code: 17.25.6

P/F white vitreous china wash basin : Surgeon type wash basin 660 x 460 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost for one no.
MATERIALS
3213
White vitreous china surgeon type back wash
each
1.00
basin 660x460 mm
9999
Fixing charges
L.S.
53.82
9999
Carriage of materials
L.S.
9.49
Add water charges @ 1% on

Rate

995.00
1.49
1.49
Total:
1089.33

Add C.P & OH @15% on

1100.22
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1265.25
Rs 1265.25

Item Code: 17.26.1

P/fF WVC wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400mm.

Code

Description

1863
9999

MATERIALS:
White glazed fire clay sink of size 600x450x250 mm
Fixing charges

9999

Carriage of materials

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

1.00

1350.00

L.S.
L.S.

40.43
10.79

1.49
1.49
Total:
1426.32

Add water charges @ 1% on

Add C.P & OH @15% on

1440.58
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 1656.67
Rs 1656.65

Page 753 of 2298

Item Code: 17.27.1

P/fF WVCchina laboratory sink including making all connections excluding cost of fittings: Size 450x300x150 mm.

Code

Details of Cost for : 1.00 No.

Unit
Quantity

Description

1871

MATERIALS:
White vitreous china laboratry sink: 450x300x150 mm

9999

Fixing charges

9999

Carriage of materials

Rate

each

1.00

820.00

L.S.

40.43

1.49

L.S.

10.79

1.49
Total:
896.32

Add water charges @ 1% on

Add C.P & OH @15% on

905.28
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1041.07
Rs 1041.05

Item Code: 17.27.2

P/fF WVCchina laboratory sink excluding cost of fittings: Size 600x450x200 mm.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1872
White vitreous china laboratory sink600x450x200 mm
each
1.00
9999
Fixing charges
L.S.
40.43
9999
Carriage of materials
L.S.
10.79
Add water charges @ 1% on

Rate
1525.00
1.49
1.49
Total:
1601.32

Add C.P & OH @15% on

1617.33
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1859.93
Rs 1859.95

Item Code: 17.28.1.1

P/F P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia

Code
7117
9999

Description
MATERIALS
Semi rigid P.V.C. waste pipe with waste fittings
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
20.28

Add water charges @ 1% on

Rate
21.00
1.49
Total:
51.22

Add C.P & OH @15% on

51.73
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 59.49
Rs 59.50

Page 754 of 2298

Item Code: 17.28.1.2

P/F P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia

Code
7118
9999

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS:
Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia each
with
Carriage of materials
L.S.

Rate

1.00

27.00

20.28

1.49
Total:
57.22

Add water charges @ 1% on

Add C.P & OH @15% on

57.79
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 66.46
Rs 66.45

Item Code: 17.28.2.1

P/F P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia

Code
7119
9999

Description
MATERIALS
Flexible pipe (coil type) with waste fittings
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
20.28

Add water charges @ 1% on

Rate
26.00
1.49
Total:
56.22

Add C.P & OH @15% on

56.78
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 65.30
Rs 65.30

Item Code: 17.28.2.2

P/F P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia

Code
7120
9999

Description
MATERIALS
Flexible pipe (coil type) with waste fittings
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
20.28

Add water charges @ 1% on

Rate
28.00
1.49
Total:
58.22

Add C.P & OH @15% on

58.80
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 67.62
Rs 67.60

Item Code: 17.29

P/F 100 mm SCI grating for gully, floor or Nahani trap
Details of Cost for : 1.00 No.

DSR-12

Page 755 of 2298

Code
1369
9999

Description
MATERIALS
100 mm S.C.I. Grating for gully or Nahani trap
Carriage of materials and fixing charges

Unit

Quantity

Rate

each
L.S.

1.00
4.16

15.00
1.49
Total:
21.20

Add water charges @ 1% on

Add C.P & OH @15% on

21.41
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 24.62
Rs 24.60

Item Code: 17.30

P/F 25 mm dia mosquito proof coupling
Code

Details of Cost for : 1.00 No.

Unit
Quantity

Description

Rate

1350

MATERIALS
Mosquito proof coupling of the approved municipal design

each

1.00

27.00

9999

Carriage of materials and fixing charges

L.S.

1.82

1.49
Total:
29.71

Add water charges @ 1% on

Add C.P & OH @15% on

30.01
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 34.51
Rs 34.50

Item Code: 17.31

P/F 600x450 mm beveled edge mirror of superior glass .. with C.P. brass screws and washers complete.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
1392
Mirror of superior make glass
each
1.00
7116
600x450 mm 6 mm thick hard board
sqm
0.27
(A) Wooden cleats
09.032
Providing 50x50x50mm 2nd class teak wood plugs fixing in
4.00
CM 1:3
Wood work)
0588
25 mm C.P.brass screw, and washers
100 N
4.00
9999
Carriage of materials
L.S.
4.16
9999
Sundries
L.S.
1.43
LABOUR
0112
Carpenter II class
Day
0.33
0114
Beldar
Day
0.33
Add water charges @ 1% except on [A] i.e on

Rate
290.00
170.00
17.42

115.00
1.49
1.49
273.00
247.00
Total:
520.43

Add C.P & OH @15% except on [A] i.e on

525.63
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 674.15
Rs 674.05

Item Code: 17.32.1

DSR-12

Page 756 of 2298

P/F mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and
shade with 6 mm thick hard board backing : Circular shape 450mm dia.

Code
7112

7116
7048
0588
9999
9999
0112
0114

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS
Mirror 450 mm dia with plastic moulded frame
Hard board 0.45x0.45 = 0.2025 sqm
Add wastage @ 10% = 0.0203 sqm
= 0.2228 sqm say 0.22sqm
Raw plug 40 to 50 mm
C.P. bras screws and washers
Sundries
Carriage of materials
LABOUR
Carpenter II class
Beldar

Rate

each

1.00

390.00

sqm
each
100 N
L.S.
L.S.

0.22
2.00
2.00
1.43
4.16

170.00
10.00
115.00
1.49
1.49

Day
Day

0.33
0.33

273.00
247.00
Total:
629.63

Add water charges @ 1% on

Add C.P & OH @15% on

635.93
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 731.32
Rs 731.30

Item Code: 17.32.2

P/F mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and
shade with 6 mm thick hard board backing : Rectangular shape 453x357

Code
7113

7116
7048
0588
9999
9999
0112
0114

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS
Mirror 453x357 mm dia with plastic moulded frame
Hard board 0.453x0.357 = 0.1617 sqm
Add wastage @ 10% = 0.0162 sqm
= 0.1779 sqm say 0.18 sqm
Raw plug 40 to 50 mm
C.P. bras screws 25 mm and washers
Sundries
Carriage of materials
LABOUR
Carpenter II class
Beldar

Rate

each

1.00

260.00

sqm
each
100 N
L.S.
L.S.

0.18
4.00
4.00
1.43
4.16

170.00
10.00
115.00
1.49
1.49

Day
Day

0.33
0.33

273.00
247.00
Total:
515.13

Add water charges @ 1% on

Add C.P & OH @15% on

520.28
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 598.32
Rs 598.30

Item Code: 17.32.3

P/F mirror of superior glass with plastic moulded frame: Oval 450 x 350 mm
Code

Description

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

MATERIALS

DSR-12

Page 757 of 2298

7114

7116
7048
0588
9999
9999
0112
0114

Oval shape mirror 450x350 mm (outer dimensions)

Hard board 0.45x0.35=0.1575 sqm
Add wastage @ 10% = 0.0158 sqm
= 0.1733 sqm say 0.17 sqm
Raw plug 40 to 50 mm
C.P. bras screws 25 mm and washers
Sundries
Carriage of materials
LABOUR
Carpenter II class
Beldar

each

1.00

300.00

sqm
each
100 N
L.S.
L.S.

0.17
4.00
4.00
1.43
4.16

170.00
10.00
115.00
1.49
1.49

Day
Day

0.33
0.33

273.00
247.00
Total:
553.43

Add water charges @ 1% on

Add C.P & OH @15% on

558.96
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 642.80
Rs 642.80

Item Code: 17.32.4

P/F mirror of superior glass ..of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm

Code

Description

7115
7116
7048
0588
9999
9999

MATERIALS:
Mirror 1500x450 mm with plastic moulded frame
600x450mm 6mm thick hard board
Rawl plug 40 to 50mm
25mm CP brass screws and washers
Sundries
Carriage of materials

0112
0114

LABOUR:
Carpenter II class
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each
sqm
each
100 N
L.S.

1.00
0.74
6.00
6.00
1.43

670.00
170.00
10.00
115.00
1.49

L.S.

4.16

1.49

Day
Day

0.33
0.33

273.00
247.00
Total:
1042.63

Add water charges @ 1% on

Add C.P & OH @15% on

1053.06
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1211.02
Rs 1211.00

Item Code: 17.33

Code
3228
7048
0586
9999
0112
0114

DSR-12

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS
600x120x5 mm glass shelf with anodised aluminium angle each
frame C.P. brass brackets & guard
Raw plugs
each
40 mm C.P. brass screws
100 N
Carriage of materials
L.S.
LABOUR
Carpenter II class
Day
Beldar
Day

Rate

1.00

130.00

2.00
4.00
4.16

10.00
190.00
1.49

0.25
0.25

273.00
247.00
Total:

Page 758 of 2298

Add water charges @ 1% on

293.80

Add C.P & OH @15% on

296.74
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 341.25
Rs 341.25

Item Code: 17.34.1

Providing and fixing toilet paper holder : C.P. brass
Code
1889
09.032
0588
9999
0112
0114

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS
C.P. brass toilet holder of standard size
each
(A) Wooden cleats
Providing 50x50x50mm 2nd class teak wood plugs fixing in
CM 1:3
25 mm C.P.brass screw
100 N
Carriage of materials
L.S.
LABOUR
Carpenter II class
Day
Beldar
Day

Rate

1.00

115.00

2.00

17.42

2.00
4.29

115.00
1.49

0.12
0.12

273.00
247.00
Total:
186.09

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

187.95
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 250.98
Rs 250.95

Item Code: 17.34.2

Providing and fixing toilet paper holder : Vitreous china
Code
3749
09.032
0588
9999
0112
0114

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS
Vitreous china toilet holder of standard size
each
(A) Wooden cleats
Providing 50x50x50mm 2nd class teak wood plugs fixing in
CM 1:3
25 mm C.P.brass screw
100 N
Carriage of materials
L.S.
LABOUR
Carpenter II class
Day
Beldar
Day

Rate

1.00

118.00

2.00

17.42

6.00
4.29

115.00
1.49

0.12
0.12

273.00
247.00
Total:
193.69

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

195.63
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 259.81
Rs 259.75

Item Code: 17.35.1.1

P/F soil, waste and vent pipes : 100 mm dia. Sand cast iron S&S pipe as per IS: 1729.
Details of Cost for : 17.37 m

DSR-12

Page 759 of 2298

Code
1617

Description
MATERIALS:
Sand cast iron pipe - 100mm dia - Single socket (1.80m long)

9999

Scaffolding

9999

Carriage of materials

0116
0100
0114

LABOUR:
Fitter grade-I
Bandhani
Beldar

Unit

Quantity

Rate

each

10.50

990.00

L.S.

80.73

1.49

L.S.

53.82

1.49

Day
Day
Day

0.42
0.21
0.83

301.00
260.00
247.00
Total:
10981.51

Add water charges @ 1% on

Add C.P & OH @15% on

11091.33
Cost for 17.37 m
Rate per One Metre:
Rate as per DSR-12:

Rs 734.31
Rs 734.30

Item Code: 17.35.1.2

P/F soil, waste and vent pipes : 100 mm dia. Centrifugally cast (spun) iron socketed pipe as per IS: 3989.
Details of Cost for : 16.87 m
Code
Description
Unit
Quantity
MATERIALS :
3620
100mm centrifugally cast (spun) iron S&S pipes (1.75m long) each
10.50
9999

Scaffolding

9999

Carriage of materials

0116
0100
0114

LABOUR:
Fitter grade-I
Bandhani
Beldar

Rate
1130.00

L.S.

80.73

1.49

L.S.

53.82

1.49

Day
Day
Day

0.42
0.21
0.83

301.00
260.00
247.00
Total:
12451.51

Add water charges @ 1% on

Add C.P & OH @15% on

12576.03
Cost for 16.87 m
Rate per One Metre:
Rate as per DSR-12:

Rs 857.29
Rs 857.30

Item Code: 17.35.2.1

P/F soil, waste and vent pipes : 75 mm diameter : Sand cast iron S&S pipe as per IS: 1729.
Details of Cost for : 17.42 m
Code
Description
Unit
Quantity
MATERIALS:
1616
Sand Cast iron S&S pipe - single socket (1.80m long)
each
10.50
9999
Scaffolding
L.S.
80.73
9999
Carriage of materials
L.S.
40.38
LABOUR:
0116
Fitter grade-I
Day
0.35
0100
Bandhani
Day
0.17

DSR-12

Rate
890.00
1.49
1.49
301.00
260.00

Page 760 of 2298

0114

Beldar

Day

0.70

247.00
Total:
9847.91

Add water charges @ 1% on

Add C.P & OH @15% on

9946.39
Cost for 17.42 m
Rate per One Metre:
Rate as per DSR-12:

Rs 656.62
Rs 656.60

Item Code: 17.35.2.2

P/F soil, waste and vent pipes : 75 mm diameter : Centrifugally cast (spun) iron socketed pipe as per IS: 3989.

Code

Description

3621
9999

MATERIALS:
75mm Centrifugally cast (spun) iron S&S pipe
Scaffolding

9999

Carriage of materials

0116
0100
0114

LABOUR:
Fitter grade-I
Bandhani
Beldar

Details of Cost for : 16.92 m

Unit
Quantity

Rate

each

10.50

985.00

L.S.

80.73

1.49

L.S.

40.38

1.49

Day
Day
Day

0.35
0.17
0.70

301.00
260.00
247.00
Total:
10845.41

Add water charges @ 1% on

Add C.P & OH @15% on

10953.86
Cost for 16.92 m
Rate per One Metre:
Rate as per DSR-12:

Rs 744.50
Rs 744.50

Item Code: 17.36.1

P/filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe

Code

Description

9999

MATERIALS:
Cement mortar, spun yam etc.

0116
0114

LABOUR:
Fitter grade-I
Beldar

Details of Cost for : 4.00 Nos

Unit
Quantity

Rate

L.S.

6.89

1.49

Day
Day

0.28
0.28

301.00
247.00
Total:
163.71

Add water charges @ 1% on

Add C.P & OH @15% on

165.35
Cost for 4.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 47.54
Rs 47.55

Item Code: 17.36.2

P/filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia
pipe

DSR-12

Page 761 of 2298

Code

Description

9999

MATERIALS:
Cement mortar, spun yam etc.

0116
0114

LABOUR:
Fitter grade-I
Beldar

Details of Cost for : 4.00 Nos

Unit
Quantity

Rate

L.S.

8.06

1.49

Day
Day

0.33
0.33

301.00
247.00
Total:
192.85

Add water charges @ 1% on

Add C.P & OH @15% on

194.78
Cost for 4.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 56.00
Rs 56.00

Item Code: 17.37.1

P/F M.S. holder-bat clamps of approved design to S.C.I/C.I (spun) pipe... including cost of cutting holes and making good the walls
etc. : For 100 mm dia. Pipe
Details of Cost for : 5.00 Nos
Code
Description
Unit
Quantity
Rate
MATERIALS
1331
M.S. holder bat clamps = 5 nos.
each
5.00
17.00
9999
Carriage of bat clamps
L.S.
2.47
1.49
LABOUR
0116
Fitter
Day
0.125
301.00
0124
Mason 2nd class
Day
0.75
273.00
0114
Beldar
Day
0.50
247.00
9999
Sundries
L.S.
7.15
1.49
C.C. Block 5x0.10x0x0.10= 0.005 cum
0295
20 mm nominal size stone aggregate
cum
0.0033
1050.00
0297
10 mm nominal size stone aggregate
cum
0.0011
1050.00
2202
Carriage of stone aggregate below 40 mm
cum
0.0044
87.60
nominal size
0982
Coarse sand
cum
0.0022
1120.00
2203
Carriage of coarse sand
cum
0.0022
87.60
0367
Cement
tonne
0.0016
5000.00
2209
Carriage of cement
tonne
0.0016
77.87
0114
Beldar
Day
0.0045
247.00
0115
Coolie
Day
0.0032
247.00
0101
Bhishti
Day
0.0014
260.00
0123
Mason 1 st class
Day
0.0003
301.00
0124
Mason 2nd class
Day
0.0003
273.00
0128
Mate
Day
0.0002
260.00
9999
Hire charges of machine etc.
L.S.
0.26
1.49
9999
Sundries
L.S.
0.13
1.49
9999
Sundries
L.S.
0.13
1.49
Total:
Add water charges @ 1% on
484.25
Add C.P & OH @15% on
489.09
Cost for 5.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 112.49
Rs 112.50

Item Code: 17.37.2

DSR-12

Page 762 of 2298

P/F M.S. holder-bat clamps of approved design to S.C.I/C.I (spun) pipe... including cost of cutting holes and making good the walls
etc. : For 75 mm dia. Pipe
Details of Cost for : 5.00 Nos
Code
Description
Unit
Quantity
Rate
MATERIALS
1332
M.S. holder bat clamps = 5 nos.
each
5.00
15.00
9999
Carriage of bat clamps
L.S.
2.47
1.49
LABOUR
0116
Fitter
Day
0.125
301.00
0124
Mason 2nd class
Day
0.75
273.00
0114
Beldar
Day
0.50
247.00
9999
Sundries
L.S.
7.15
1.49
C.C. Block 5x0.10x0.10x0.10= 0.005 cum
0295
20 mm nominal size stone aggregate
cum
0.0033
1050.00
0297
10 mm nominal size stone aggregate
cum
0.0011
1050.00
2202
Carriage of stone aggregate below 40 mm
cum
0.0044
87.60
nominal size
0982
Coarse sand
cum
0.0022
1120.00
2203
Carriage of coarse sand
cum
0.0022
87.60
0367
Cement
tonne
0.0016
5000.00
2209
Carriage of cement
tonne
0.0016
77.87
0114
Beldar
Day
0.0045
247.00
0115
Coolie
Day
0.0032
247.00
0101
Bhishti
Day
0.0014
260.00
0123
Mason 1 st class
Day
0.0003
301.00
0124
Mason 2nd class
Day
0.0003
273.00
0128
Mate
Day
0.0002
260.00
9999
Hire charges of machine etc.
L.S.
0.26
1.49
9999
Sundries
L.S.
0.13
1.49
9999
Sundries
L.S.
0.13
1.49
Total:
Add water charges @ 1% on
474.25
Add C.P & OH @15% on
478.99
Cost for 5.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 110.17
Rs 110.15

Item Code: 17.38.1.1

P/F bend of required degree with access door...bolts and nuts complete. 100 mm Sand cast iron S&S as per IS - 1729

Code
1625
1374
9999

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS:
Sand Cast Iron bend with door , cost of bolts and nuts
Insertion rubber washer 3mm thick
Carriage of materials and fixing charges

Rate

each
each

1.00
1.00

233.00
14.00

L.S.

13.52

1.49
Total:
267.14

Add water charges @ 1% on

Add C.P & OH @15% on

269.81
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 310.28
Rs 310.30

Page 763 of 2298

Item Code: 17.38.1.2

P/F bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm Sand cast
iron S&S as per IS - 3989
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS
3624
100 mm dia sand cast iron S & S bend with access door each
1.00
270.00
including cost of bolts and nuts
1374
Insertion rubber washer 3 mm thick
each
1.00
14.00
9999
Carriage of materials and fixing charges
L.S.
13.52
1.49
Total:
Add water charges @ 1% on
304.14
Add C.P & OH @15% on
307.18
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 353.26
Rs 353.25

Item Code: 17.38.2.1

P/F bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 75 mm dia Sand cast
iron S&S as per IS - 1729
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS
1624
75 mm sand cast iron bend with access door including cost of each
1.00
187.00
bolts and nuts
1373
Insertion rubber washer 3 mm thick
each
1.00
11.00
9999
Carriage of materials and fixing charges
L.S.
10.79
1.49
Total:
Add water charges @ 1% on
214.08
Add C.P & OH @15% on
216.22
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 248.65
Rs 248.65

Item Code: 17.38.2.2

P/F bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 75 mm dia Sand cast
iron S&S as per IS- 3989
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS
3625
75 mm dia send cast iron S&S bend with access door including each
1.00
215.00
cost of bolts and nuts
1373
Insertion rubber washer 3 mm thick
each
1.00
11.00
9999
Carriage of materials and fixing charges
L.S.
10.79
1.49
Total:
Add water charges @ 1% on
242.08
Add C.P & OH @15% on
244.50
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 281.18
Rs 281.15

Page 764 of 2298

Item Code: 17.39.1.1

P/F bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm Sand cast
iron S&S as per IS - 1729
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS
1621
100 mm sand cast iron plain bend
each
1.00
210.00
9999
Carriage of materials and fixing charges
L.S.
13.52
1.49
Total:
Add water charges @ 1% on
230.14
Add C.P & OH @15% on
232.44
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 267.31
Rs 267.30

Item Code: 17.39.1.2

P/F plain bend of required degree. 100 mm Sand cast iron S&S as per IS : 3989
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
3628
100 mm dia sand cast iron S & S plain bend
each
1.00
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate
235.00
1.49
Total:
255.14

Add C.P & OH @15% on

257.69
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 296.34
Rs 296.35

Item Code: 17.39.2.1

P/F bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 75 mm Sand cast iron
S&S as per IS -1729
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS
1620
75 mm sand cast iron plain bend
each
1.00
170.00
9999
Carriage of materials and fixing charges
L.S.
10.79
1.49
Total:
Add water charges @ 1% on
186.08
Add C.P & OH @15% on
187.94
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 216.13
Rs 216.15

Item Code: 17.39.2.2

P/F S.C.I plain bend : 75 mm dia. : SCI S&S as per IS: 3989.
Code
3629
9999

DSR-12

Description
MATERIALS
75 mm dia sand cast iron S&S plain bend
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
10.79

Rate
175.00
1.49

Page 765 of 2298

Add water charges @ 1% on

Total:
191.08

Add C.P & OH @15% on

192.99
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 221.94
Rs 221.95

Item Code: 17.40.1.1

P/F S.C.I heel rest bend : 100 mm dia. : SCI S & S as per IS: 1729.
Code
1667
9999

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS
100 mm sand cast iron heel rest bend
Carriage of materials and fixing charges

each
L.S.

1.00
13.52

Add water charges @ 1% on

Rate
239.00
1.49
Total:
259.14

Add C.P & OH @15% on

261.73
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 300.99
Rs 301.00

Item Code: 17.40.1.2

P/F S.C.I heel rest bend : 100 mm dia. : SCI S & S as per IS: 3989.
Code
3634
9999

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS
100 mm dia sand cast iron S & S heel rest sanitary bend
Carriage of materials and fixing charges

each
L.S.

1.00
13.52

Add water charges @ 1% on

Rate
275.00
1.49
Total:
295.14

Add C.P & OH @15% on

298.09
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 342.80
Rs 342.80

Item Code: 17.40.2.1

P/F S.C.I heel rest bend : 75 mm dia. : SCI S & S as per IS: 1729.
Code
1666
9999

Description
MATERIALS
75 mm sand cast iron heel rest bend
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
10.79

Add water charges @ 1% on

Rate
200.00
1.49
Total:
216.08

Add C.P & OH @15% on

218.24
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 250.98
Rs 251.00

Page 766 of 2298

Item Code: 17.40.2.2

P/F S.C.I heel rest bend : 75 mm dia. : SCI S & S as per IS: 3989.
Code
3635
9999

Description
MATERIALS
75 mm dia send cast iron S&S heel rest sanitary bend
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
10.79

Add water charges @ 1% on

Rate
240.00
1.49
Total:
256.08

Add C.P & OH @15% on

258.64
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 297.44
Rs 297.45

Item Code: 17.41.1.1

P/F double equal junction of required degree with access door, insertion rubber washer 3 mm thick...: 100x100x100x100mm SCI
S&S as per IS - 1729
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
1637
S.C.I.bend double equal junctions 100x100x100x100 mm dia
with access door
each
1.00
530.00
1374
Insertion rubber washer 3mm thick
each
1.00
14.00
9999
Carriage of materials and fixing charges
L.S.
13.39
1.49
Total:
Add water charges @ 1% on
563.95
Add C.P & OH @15% on
569.59
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 655.03
Rs 655.05

Item Code: 17.41.1.2

P/F double equal junction of required degree with access door, insertion rubber washer 3 mm thick...: 100x100x100x100mm SCI
S&S as per IS - 3989
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
3654
S.C.I. S & S double equal junction with access door
100x100x100x100 mm dia
each
1.00
610.00
1374
Insertion rubber washer 3mm thick
each
1.00
14.00
9999
Carriage of materials and fixing charges
L.S.
13.39
1.49
Total:
Add water charges @ 1% on
643.95
Add C.P & OH @15% on
650.39
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 747.95
Rs 747.95

Page 767 of 2298

Item Code: 17.41.2.1

P/F double equal junction of required degree with access door, insertion rubber washer 3 mm thick...: 75x75x75x75 mm Sand cast
iron S&S as per IS - 1729
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
1636
S.C.I.bend double equal junctions 75x75x75x75 mm diawith
access door
each
1.00
395.00
1373
Insertion rubber washer 3mm thick (for 75mm)
each
1.00
11.00
9999
Carriage of materials and fixing charges
L.S.
10.79
1.49
Total:
Add water charges @ 1% on
422.08
Add C.P & OH @15% on
426.30
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 490.25
Rs 490.25

Item Code: 17.41.2.2

P/F double equal junction of required degree with access door, insertion rubber washer 3 mm thick...: 75x75x75x75 mm Sand cast
iron S&S as per IS - 3989
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
3655
S.C.I. S & S double equal junction with access door
75x75x75x75 mm dia
each
1.00
475.00
1373
Insertion rubber washer 3mm thick (for 75mm)
each
1.00
11.00
9999
Carriage of materials and fixing charges
L.S.
10.79
1.49
Total:
Add water charges @ 1% on
502.08
Add C.P & OH @15% on
507.10
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 583.17
Rs 583.15

Item Code: 17.42.1.1

P/F double equal plain junction of required degree. 100x100x100x100 mm SCI S&S as per IS - 1729
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1634
S.C.I. plain bend double equal junctions : 100x100x100x100
mm dia
each
1.00
9999
Carriage of materials and fixing charges
L.S.
13.52

DSR-12

Rate

490.00

Add water charges @ 1% on

1.49
Total:
510.14

Add C.P & OH @15% on

515.24

Page 768 of 2298

Cost for 1.00 No.

Rate per Each:
Rate as per DSR-12:

Rs 592.53
Rs 592.55

Item Code: 17.42.1.2

P/F double equal plain junction of required degree. 100x100x100x100 mm SCI S&S as per IS - 3989
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
3650
S.C.I. S & S plain double equal junction 100x100x100 mm dia

9999

Rate

each

1.00

565.00

L.S.

13.52

1.49
Total:
585.14

Carriage of materials and fixing charges

Add water charges @ 1% on

Add C.P & OH @15% on

590.99
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 679.64
Rs 679.65

Item Code: 17.42.2.1

P/F double equal plain junction of required degree. 75x75x75x75 mm Sand cast iron S&S as per IS - 1729
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1633
S.C.I. plain bend double equal junctions : 75x75x75x75 mm
dia
each
1.00
9999
Carriage of materials and fixing charges
L.S.
10.79
Add water charges @ 1% on

Rate

335.00
1.49
Total:
351.08

Add C.P & OH @15% on

354.59
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 407.78
Rs 407.80

Item Code: 17.42.2.2

P/F double equal plain junction of required degree. 75x75x75x75 mm SCI S&S as per IS - 3989
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
3651
S.C.I. S & S plain double equal junction 75x75x75 mm dia

9999

DSR-12

Rate

each

1.00

450.00

L.S.

10.79

Add water charges @ 1% on

1.49
Total:
466.08

Add C.P & OH @15% on

470.74

Carriage of materials and fixing charges

Page 769 of 2298

Cost for 1.00 No.

Rate per Each:
Rate as per DSR-12:

Rs 541.35
Rs 541.35

Item Code: 17.43.1.1

P/F single equal plain junction of required degree. 100x100x100 mm Sand cast iron S&S as per IS - 1729
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1631
S.C.I.bend single equal junctions 100x100x100 mm dia with
access door
each
1.00
9999
Carriage of materials and fixing charges
L.S.
13.52
1374
Insertion rubber washer 3mm thick
each
1.00
Add water charges @ 1% on

Rate

350.00
1.49
14.00
Total:
384.14

Add C.P & OH @15% on

387.98
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 446.18
Rs 446.20

Item Code: 17.43.1.2

P/F single equal plain junction of required degree. 100x100x100 mm Sand cast iron S&S as per IS - 3989
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
3644
100x100x100mm centrifugally cast (spun) iron S&S single each
1.00
equal plain junction
9999
Carriage of materials and fixing charges
L.S.
13.52
1374
Insertion rubber washer 3mm thick
each
1.00
Add water charges @ 1% on

Rate
465.00

1.49
14.00
Total:
499.14

Add C.P & OH @15% on

504.13
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 579.75
Rs 579.75

Item Code: 17.43.2.1

P/F single equal plain junction of required degree. 75x75x75 mm Sand cast iron S&S as per IS - 1729
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1630
S.C.I.bend single equal junctions 75x75x75 mm dia with
access door
each
1.00
9999
Carriage of materials and fixing charges
L.S.
10.79
1373
Insertion rubber washer 3mm thick (for 75mm)
each
1.00
Add water charges @ 1% on

DSR-12

Rate

260.00
1.49
11.00
Total:
287.08

Page 770 of 2298

Add C.P & OH @15% on

289.95
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 333.44
Rs 333.45

Item Code: 17.43.2.2

P/F single equal plain junction of required degree. 75x75x75 mm Sand cast iron S&S as per IS - 3989
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
3645
75x75x75 mm centrifugally cast (spun) S&S sigle equal each
1.00
junction with door
9999
Carriage of materials and fixing charges
L.S.
10.79
1373
Insertion rubber washer 3mm thick (for 75mm)
each
1.00
Add water charges @ 1% on

Rate
350.00

1.49
11.00
Total:
377.08

Add C.P & OH @15% on

380.85
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 437.98
Rs 438.00

Item Code: 17.44.1.1

P/F single equal plain junction of required degree. 100x100x100 mm Sand cast iron S&S as per IS - 1729
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
1628
S.C.I. plain bend single equal junctions : 100x100x100 mm dia

9999

Rate

each

1.00

310.00

L.S.

13.52

1.49
Total:
330.14

Carriage of materials and fixing charges

Add water charges @ 1% on

Add C.P & OH @15% on

333.44
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 383.46
Rs 383.45

Item Code: 17.44.1.2

P/F single equal plain junction of required degree. 100x100x100 mm Sand cast iron S&S as per IS - 3989
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
3640
S.C.I. S&S single equal junctions100x100x100 mm
each
1.00
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate
430.00
1.49
Total:
450.14

Add C.P & OH @15% on

454.64
Cost for 1.00 No.

DSR-12

Page 771 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 522.84
Rs 522.85

Item Code: 17.44.2.1

P/F single equal plain junction of required degree. 100x100x100 mm Sand cast iron S&S as per IS - 1729
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1627
S.C.I. plain bend single equal junctions :75x75x75 mm dia

9999

Rate

each

1.00

240.00

L.S.

10.79

1.49
Total:
256.08

Carriage of materials and fixing charges

Add water charges @ 1% on

Add C.P & OH @15% on

258.64
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 297.44
Rs 297.45

Item Code: 17.44.2.2

P/F single equal plain junction of required degree. 75x75x75 mm Sand cast iron S&S as per IS - 3989
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
3641
S.C.I. S & S plain double equal junction 75x75x75x75 mm dia

9999

Rate

each

1.00

310.00

L.S.

10.79

1.49
Total:
326.08

Carriage of materials and fixing charges

Add water charges @ 1% on

Add C.P & OH @15% on

329.34
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 378.74
Rs 378.75

Item Code: 17.45.1.1

P/F double unequal junction of required degree with access door : 100 x 100 x 75 x 75 mm : SCI S & S as per IS: 1729.

Code
1662
1374
9999

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS
100x100x75x75 mm sand cast iron branch with access door each
including cost of bolts and nuts
Insertion rubber washer 3 mm thick
each
Carriage of materials and fixing charges
L.S.

Rate

1.00

550.00

1.00
13.52

14.00
1.49
Total:
584.14

Add water charges @ 1% on

Add C.P & OH @15% on

589.98
Cost for 1.00 No.

DSR-12

Page 772 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 678.48
Rs 678.50

Item Code: 17.45.1.2

P/F double unequal junction of required degree with access door : 100 x 100 x 75 x 75 mm : SCI S & S as per IS: 3989.

Code
3674
1374
9999

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS
100x100x75x75 mm sand cast iron S&S double unequal each
junction with access door including c
Insertion rubber washer 3 mm thick
each
Carriage of materials and fixing charges
L.S.

Rate

1.00

850.00

1.00
13.52

14.00
1.49
Total:
884.14

Add water charges @ 1% on

Add C.P & OH @15% on

892.98
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1026.93
Rs 1026.95

Item Code: 17.46.1.1

P/F double unequal plain jun- ction of required degree : 100 x 100 x 75 x 75 mm : SCI S & S as per IS: 1729.

Code
1659
9999

Description
MATERIALS
100X100X75X75 mm junction
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
13.52

Add water charges @ 1% on

Rate
510.00
1.49
Total:
530.14

Add C.P & OH @15% on

535.44
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 615.76
Rs 615.75

Item Code: 17.46.1.2

P/F double unequal plain jun- ction of required degree : 100 x 100 x 75 x 75 mm : SCI S & S as per IS: 1729.

Code
3670
9999

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS
100x100x75x75 mm sand cast iron S&S double unequal plain each
junction
Carriage of materials and fixing charges
L.S.

Rate

1.00

780.00

13.52

1.49
Total:
800.14

Add water charges @ 1% on

Add C.P & OH @15% on

808.14
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 929.36
Rs 929.35

Page 773 of 2298

Item Code: 17.47.1.1

P/F SCI unequal junction with access door : 100 x 100 x 75 mm : SCI S & S as per IS: 1729.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
1656
100x100x75 mm S.C.I, single unequal junction with access each
1.00
door including cost of bolts and
1374
Insertion rubber washer 3 mm thick
each
1.00
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate
390.00
14.00
1.49
Total:
424.14

Add C.P & OH @15% on

428.38
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 492.64
Rs 492.65

Item Code: 17.47.1.2

P/F SCI unequal junction with access door : 100 x 100 x 75 mm : SCI S & S as per IS: 3989.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
3664
100x100x75 mm sand cast iron S&S single unequal junction each
1.00
with access door including cost
1374
Insertion rubber washer 3 mm thick
each
1.00
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate
630.00
14.00
1.49
Total:
664.14

Add C.P & OH @15% on

670.78
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 771.40
Rs 771.40

Item Code: 17.48.1.1

P/F single unequal plain jun- ction of required degree : 100 x 100 x 75 mm : SCI S & S as per IS: 1729.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost for one no.
MATERIALS
1653
100X100X75 mm junction
each
1.00
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate

350.00
1.49
Total:
370.14

Add C.P & OH @15% on

373.84
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 429.92
Rs 429.90

Item Code: 17.48.1.2

P/F single unequal plain jun- ction of required degree : 100 x 100 x 75 mm : SCI S & S as per IS: 3989.

DSR-12

Page 774 of 2298

Code
3660
9999

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS
100x100x75 mm sand cast iron S&S single unequal plain each
junction
Carriage of materials and fixing charges
L.S.

Rate

1.00

560.00

13.52

1.49
Total:
580.14

Add water charges @ 1% on

Add C.P & OH @15% on

585.94
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 673.83
Rs 673.85

Item Code: 17.49.1.1

P/F double equal plain invert branch of required degree : 100 x 100 x 100 x 100 mm : SCI S & S as per IS: 1729.

Code
1673
9999

Description
MATERIALS
100X100X100x100 mm sand cast iron invert branch
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
13.52

Add water charges @ 1% on

Rate
510.00
1.49
Total:
530.14

Add C.P & OH @15% on

535.44
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 615.76
Rs 615.75

Item Code: 17.49.1.2

P/F double equal plain invert branch of required degree : 100 x 100 x 100 x 100 mm : SCI S & S as per IS: 3989.

Code
3685
9999

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS
100x 100x 100 x 100 mm send cast iron S&S double equal each
plain invert branch
Carriage of materials and fixing charges
L.S.

Rate

1.00

525.00

13.52

1.49
Total:
545.14

Add water charges @ 1% on

Add C.P & OH @15% on

550.59
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 633.18
Rs 633.20

Item Code: 17.49.2.1

P/F double equal plain invert branch of required degree : 75 x 75 x 75 x 75 mm : SCI S & S as per IS: 1729.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
1672
75X75X75x75 mm sand cast iron invert branch
each
1.00
9999
Carriage of materials and fixing charges
L.S.
10.79

DSR-12

Rate
382.00
1.49

Page 775 of 2298

Add water charges @ 1% on

Total:
398.08

Add C.P & OH @15% on

402.06
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 462.37
Rs 462.35

Item Code: 17.49.2.2

P/F double equal plain invert branch of required degree : 75 x 75 x 75 x 75 mm : SCI S & S as per IS: 3989.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
3686
75x75x75x75 mm centrifugally cast(spun) iron S&S double each
1.00
equal plain invert branch
9999
Carriage of materials and fixing charges
L.S.
10.79
Add water charges @ 1% on

Rate
405.00
1.49
Total:
421.08

Add C.P & OH @15% on

425.29
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 489.08
Rs 489.10

Item Code: 17.50.1.1

P/F single equal plain invert branch of required degree : 100 x 100 x 100 mm : SCI S & S as per IS: 1729.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
1670
100X100X100 mm sand cast iron invert branch
each
1.00
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate
387.00
1.49
Total:
407.14

Add C.P & OH @15% on

411.21
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 472.89
Rs 472.90

Item Code: 17.50.1.2

P/F single equal plain invert branch of required degree : 100 x 100 x 100 mm : SCI S & S as per IS: 3989.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
3681
100x100x100 mm sand cast iron S&S single equal plain invert each
1.00
branch
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate
395.00
1.49
Total:
415.14

Add C.P & OH @15% on

419.29
Cost for 1.00 No.
Rate per Each:

DSR-12

Rs 482.18

Page 776 of 2298

Rate as per DSR-12:

Rs 482.20

Item Code: 17.50.2.1

P/F single equal plain invert branch of required degree : 75 x 75 x 75 mm : SCI S & S as per IS: 1729.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
1669
75X75X75 mm sand cast-iron invert branch
each
1.00
9999
Carriage of materials and fixing charges
L.S.
10.79
Add water charges @ 1% on

Rate
290.00
1.49
Total:
306.08

Add C.P & OH @15% on

309.14
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 355.51
Rs 355.50

Item Code: 17.50.2.2

P/F single equal plain invert branch of required degree : 75 x 75 x 75 mm : SCI S & S as per IS: 3989.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
3682
75x75x75 mm sand cast iron S & S single equal plain invert each
1.00
branch
9999
Carriage of materials and fixing charges
L.S.
10.79
Add water charges @ 1% on

Rate
303.00
1.49
Total:
319.08

Add C.P & OH @15% on

322.27
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 370.61
Rs 370.60

Item Code: 17.51.1.1

P/F double unequal invert branch of required degree : 100 x 100 x 75 x 75 mm : SCI S & S as per IS: 3989.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
1677
100X100X75x75 mm sand cast iron invert branch
each
1.00
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate
545.00
1.49
Total:
565.14

Add C.P & OH @15% on

570.79
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 656.41
Rs 656.40

Item Code: 17.51.1.2

P/F double unequal invert branch of required degree : 100 x 100 x 75 x 75 mm : SCI S & S as per IS: 3989.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS

DSR-12

Rate

Page 777 of 2298

3695
9999

100x100x75x75 mm sand cast iron S&S double unequal plain each

invert branch
Carriage of materials and fixing charges
L.S.

1.00

700.00

13.52

1.49
Total:
720.14

Add water charges @ 1% on

Add C.P & OH @15% on

727.34
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 836.44
Rs 836.45

Item Code: 17.52.1.1

P/F single unequal plain invert branch of required degree : 100 x 100 x 75 mm : SCI S & S as per IS: 1729.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
1674
100X100X75 mm sand cast iron invert branch
each
1.00
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate
466.00
1.49
Total:
486.14

Add C.P & OH @15% on

491.00
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 564.65
Rs 564.65

Item Code: 17.52.1.2

P/F single unequal plain invert branch of required degree : 100 x 100 x 75 mm : SCI S & S as per IS: 3989.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
3690
100x100x75 mm sand cast iron S&S single unequal plain each
1.00
invert branch
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate
505.00
1.49
Total:
525.14

Add C.P & OH @15% on

530.39
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 609.95
Rs 609.95

Item Code: 17.53.1.1

P/F sand cast iron S & S off sets as per IS: 1729: 76 mm off sets : With 75 mm dia. pipe.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
3746
76 mm sand cast iron S&S offset with 75 mm dia pipe
each
1.00
9999
Carriage of materials and fixing charges
L.S.
10.79
Add water charges @ 1% on

Rate
215.00
1.49
Total:
231.08

Add C.P & OH @15% on

233.39
Cost for 1.00 No.

DSR-12

Page 778 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 268.40
Rs 268.40

Item Code: 17.53.1.2

P/F sand cast iron S & S off sets as per IS: 1729: 76 mm off sets : With 100 mm dia. pipe.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
3747
76 mm sand cast iron S&S offset with 100 mm dia pipe
each
1.00
9999
Carriage of materials and fixing charges
L.S.
10.79
Add water charges @ 1% on

Rate
246.00
1.49
Total:
262.08

Add C.P & OH @15% on

264.70
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 304.41
Rs 304.40

Item Code: 17.53.2.1

P/F sand cast iron S & S off sets as per IS: 1729: 114 mm off sets : With 75 mm dia. pipe.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
3712
114 mm sand cast iron S&S offset with 75 mm dia pipe
each
1.00
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate
270.00
1.49
Total:
290.14

Add C.P & OH @15% on

293.04
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 337.00
Rs 337.00

Item Code: 17.53.2.2

P/F sand cast iron S & S off sets as per IS: 1729: 114 mm off sets : With 100 mm dia. pipe.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
3713
114 mm sand cast iron S&S offset with 100 mm dia pipe
each
1.00
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate
355.00
1.49
Total:
375.14

Add C.P & OH @15% on

378.89
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 435.72
Rs 435.70

Item Code: 17.53.3.1

P/F sand cast iron S & S off sets as per IS: 1729: 152 mm off sets : With 75 mm dia. pipe.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity

DSR-12

Rate

Page 779 of 2298

3716
9999

MATERIALS
152 mm sand cast iron S&S offset with 75 mm dia pipe
Carriage of materials and fixing charges

each
L.S.

1.00
17.94

Add water charges @ 1% on

335.00
1.49
Total:
361.73

Add C.P & OH @15% on

365.35
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 420.15
Rs 420.15

Item Code: 17.53.3.2

P/F sand cast iron S & S off sets as per IS: 1729: 152 mm off sets : With 100 mm dia. pipe.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
3717
152 mm sand cast iron S&S offset with 100 mm dia pipe
each
1.00
9999
Carriage of materials and fixing charges
L.S.
17.94
Add water charges @ 1% on

Rate
440.00
1.49
Total:
466.73

Add C.P & OH @15% on

471.40
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 542.11
Rs 542.10

Item Code: 17.54.1.1

P/F SCI S & S off sets as per IS: 3989: 75 mm off sets : With 75 mm dia. pipe.
Code
3699
9999

Description
MATERIALS
75 mm sand cast iron S&S offset with 75 mm dia pipe
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
10.79

Add water charges @ 1% on

Rate
215.00
1.49
Total:
231.08

Add C.P & OH @15% on

233.39
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 268.40
Rs 268.40

Item Code: 17.54.2.1

P/F SCI S & S off sets as per IS: 3989: 150 mm off sets : With 75 mm dia. pipe.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
3707
150 mm sandcast iron S&S offset with 75 mm dia pipe
each
1.00
9999
Carriage of materials and fixing charges
L.S.
16.12
Add water charges @ 1% on

Rate
270.00
1.49
Total:
294.02

Add C.P & OH @15% on

296.96
Cost for 1.00 No.

DSR-12

Page 780 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 341.50
Rs 341.50

Item Code: 17.54.2.2

P/F SCI S & S off sets as per IS: 3989: 150 mm off sets : With 100 mm dia. pipe.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
3708
150 mm sand cast iron S&S offset with 100 mm dia pipe
each
1.00
9999
Carriage of materials and fixing charges
L.S.
16.12
Add water charges @ 1% on

Rate
370.00
1.49
Total:
394.02

Add C.P & OH @15% on

397.96
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 457.65
Rs 457.65

Item Code: 17.55.1.1

P/F door piece, insertion rubber washer 3 mm thick, bolts and nuts complete : 100 mm : SCI S & S as per IS: 1729.

Code
1683
1374
9999

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS
100 mm sand cast iron door piece including cost of bolts and each
nuts
Insertion rubber washer
each
Carriage of materials and fixing charges
L.S.

Rate

1.00

350.00

1.00
13.52

14.00
1.49
Total:
384.14

Add water charges @ 1% on

Add C.P & OH @15% on

387.98
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 446.18
Rs 446.20

Item Code: 17.55.1.2

P/F door piece, insertion rubber washer 3 mm thick, bolts and nuts complete : 100 mm : SCI S & S as per IS: 3989.

Code
3728
1374
9999

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS
100 mm sand cast iron S&S door piece including cost of bolts each
and nuts
Insertion rubber washer
each
Carriage of materials and fixing charges
L.S.

Rate

1.00

370.00

1.00
13.52

14.00
1.49
Total:
404.14

Add water charges @ 1% on

Add C.P & OH @15% on

408.18
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 469.41
Rs 469.40

Page 781 of 2298

Item Code: 17.55.2.1

P/F door piece, insertion rubber washer 3 mm thick, bolts and nuts complete : 75 mm : SCI S & S as per IS: 1729.

Code
1682
1373
9999

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS
75 mm sand cast iron door piece including cost of bolts and each
nuts
Insertion rubber washer
each
Carriage of materials and fixing charges
L.S.

Rate

1.00

253.00

1.00
10.79

11.00
1.49
Total:
280.08

Add water charges @ 1% on

Add C.P & OH @15% on

282.88
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 325.31
Rs 325.30

Item Code: 17.55.2.2

P/F door piece, insertion rubber washer 3 mm thick, bolts and nuts complete : 75 mm : SCI S & S as per IS: 1729.

Code
3729
1373
9999

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS
75 mm sand cast iron S&S door piece including cost of bolts each
and nuts
Insertion rubber washer
each
Carriage of materials and fixing charges
L.S.

Rate

1.00

260.00

1.00
10.79

11.00
1.49
Total:
287.08

Add water charges @ 1% on

Add C.P & OH @15% on

289.95
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 333.44
Rs 333.45

Item Code: 17.56.1.1

P/Fterminal guard: 100 mm Sand cast iron S&S as per IS - 1729
Code

Description

1640

MATERIALS:
Slotted cowl (terminal guard ): 100 mm dia

9999

Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

1.00

187.00

L.S.

13.52

1.49
Total:
207.14

Add water charges @ 1% on

Add C.P & OH @15% on

209.21
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 240.59
Rs 240.60

Page 782 of 2298

Item Code: 17.56.1.2

P/Fterminal guard: 100 mm Sand cast iron S&S as per IS - 3989
Details of Cost for : 1.00 No.
Unit
Quantity

Code

Description

3733

MATERIALS:
Centrifugally cast iron(spun) slotted cowl(terminal guard) :
100 mm dia

9999

Carriage of materials and fixing charges

Rate

each

1.00

190.00

L.S.

13.52

1.49
Total:
210.14

Add water charges @ 1% on

Add C.P & OH @15% on

212.24
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 244.08
Rs 244.10

Item Code: 17.56.2.1

P/Fterminal guard: 75 mm Sand cast iron S&S as per IS - 1729
Code

Details of Cost for : 1.00 No.

Unit
Quantity

Description

1639

MATERIALS:
Slotted cowl (terminal guard ): 75 mm dia

9999

Carriage of materials and fixing charges

Rate

each

1.00

137.00

L.S.

10.79

1.49
Total:
153.08

Add water charges @ 1% on

Add C.P & OH @15% on

154.61
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 177.80
Rs 177.80

Item Code: 17.56.2.2

P/Fterminal guard: 75 mm Sand cast iron S&S as per IS - 3989
Details of Cost for : 1.00 No.
Unit
Quantity

Code

Description

3734

MATERIALS:
Centrifugally cast iron (spun) slotted cowl(terminal guard) : 75
mm dia

9999

Carriage of materials and fixing charges

Rate

each

1.00

175.00

L.S.

10.79

1.49
Total:
191.08

Add water charges @ 1% on

Add C.P & OH @15% on

192.99
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 221.94
Rs 221.95

Item Code: 17.57.1.1

DSR-12

Page 783 of 2298

P/F collar : 100 mm : SCI S & S as per IS: 1729.

Code
1686
9999

Description
MATERIALS
100 mm sand cast iron collar
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
13.52

Add water charges @ 1% on

Rate
133.00
1.49
Total:
153.14

Add C.P & OH @15% on

154.67
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 177.87
Rs 177.85

Item Code: 17.57.1.2

P/F collar : 100 mm : SCI S & S as per IS: 1729.
Code
3738
9999

Description
MATERIALS.
100 sand cast iron S&S collar
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
13.52

Add water charges @ 1% on

Rate
185.00
1.49
Total:
205.14

Add C.P & OH @15% on

207.19
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 238.27
Rs 238.25

Item Code: 17.57.2.1

Code
1685
9999

Description
MATERIALS
75 mm sand cast iron collar
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
10.79

Add water charges @ 1% on

Rate
98.00
1.49
Total:
114.08

Add C.P & OH @15% on

115.22
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 132.50
Rs 132.50

Item Code: 17.57.2.2

P/F collar : 75 mm : SCI S & S as per IS: 1729.
Code
3739
9999

DSR-12

Description
MATERIALS
75 mm sand cast iron S&S collar
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
10.79

Rate

Add water charges @ 1% on

130.00
1.49
Total:
146.08

Add C.P & OH @15% on

147.54

Page 784 of 2298

Cost for 1.00 No.

Rate per Each:
Rate as per DSR-12:

Rs 169.67
Rs 169.65

Item Code: 17.58.1

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: 100 mm

Code

Description

1397
1881
9999

MATERIALS:
Pig lead
Spun yarn or plain gaskin
Kerosene oil, fuel and other sundries

9999

Carriage of materials

0116
0117
0114

LABOUR:
Fitter grade-I
Assistant Fitter or II class Fitter
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

kilog
kilog

0.98
0.11

90.00
40.00

L.S.

13.52

1.49

L.S.

1.43

1.49

Day
Day
Day

0.06
0.06
0.12

301.00
273.00
247.00
Total:
178.95

Add water charges @ 1% on

Add C.P & OH @15% on

180.74
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 207.85
Rs 207.85

Item Code: 17.58.2

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: 75 mm

Code

1397
1881
9999
9999
0116
0117
0114

Description
Details of cost for one joint
MATERIALS
Pig lead
Spun yarn
Kerosene oil, fuel and other sundries
Carriage of materials
LABOUR
Fitter
Asstt. Fitter
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

kilog
kilog
L.S.
L.S.

0.88
0.09
10.79
1.43

90.00
40.00
1.49
1.49

Day
Day
Day

0.05
0.05
0.09

301.00
273.00
247.00
Total:
151.94

Add water charges @ 1% on

Add C.P & OH @15% on

153.46
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 176.48
Rs 176.50

Item Code: 17.58.3

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: 50 mm

DSR-12

Page 785 of 2298

Code

1397
1881
9999
9999
0116
0117
0114

Description
Details of cost for one joint
MATERIALS
Pig lead
Spun yarn
Kerosene oil, fuel and other sundries
Carriage of materials
LABOUR
Fitter
Asstt. Fitter
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

kilog
kilog
L.S.
L.S.

0.77
0.06
6.76
1.43

90.00
40.00
1.49
1.49

Day
Day
Day

0.04
0.05
0.05

301.00
273.00
247.00
Total:
121.94

Add water charges @ 1% on

Add C.P & OH @15% on

123.16
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 141.63
Rs 141.65

Item Code: 17.59.1

P/F M.S. stays and clamps forSCI/centrifugally cast (spun) iron pipes of diameter : 100 mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost for one no.
MATERIALS
1330
M.S. stayes & clamps including bolts and nuts for 100 mm each
1.00
pipe
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate

33.00
1.49
Total:
53.14

Add C.P & OH @15% on

53.67
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 61.72
Rs 61.70

Item Code: 17.59.2

P/F M.S. stays and clamps forSCI/centrifugally cast (spun) iron pipes of diameter : 75 mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1335
Clamps and M.S. stays including bolts and nuts for 75 mm
pipe
each
1.00
9999
Carriage of materials and fixing charges
L.S.
10.79
Add water charges @ 1% on

Rate

29.00
1.49
Total:
45.08

Add C.P & OH @15% on

45.53
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 52.36
Rs 52.35

Page 786 of 2298

Item Code: 17.59.3

P/F M.S. stays and clamps forSCI/centrifugally cast (spun) iron pipes of diameter : 50 mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1334
Clamps and M.S. stays including bolts and nuts for 50 mm
pipe
each
1.00
9999
Carriage of materials and fixing charges
L.S.
9.49
Add water charges @ 1% on

Rate

25.00
1.49
Total:
39.14

Add C.P & OH @15% on

39.53
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 45.46
Rs 45.45

Item Code: 17.60.1.1

P/F SCI trap of self cleaning design 100mm inlet and 100mm outlet SCI S & S
Code
7808
9999
9999
0123
0114

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS
Sand cast iron S&S 100 mm inlet and 100 mm outlet
Cement, sand and grit etc.
Carriage of materials
LABOUR
Mason 1st class
Beldar

Rate

each
L.S.
L.S.

1.00
13.52
2.73

392.00
1.49
1.49

Day
Day

0.50
0.50

301.00
247.00
Total:
690.21

Add water charges @ 1% on

Add C.P & OH @15% on

697.11
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 801.68
Rs 801.70

Item Code: 17.60.1.2

P/F SCI trap of self cleaning design 100mm inlet and 100mm outlet SCI S & S
Code
1897
9999
9999
0123
0114

Description
MATERIALS
Sand cast iron trap with 100 mm inlet and 100 mm outlet
Cement, sand and grit etc.
Carriage of materials
LABOUR
Mason 1st class
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

1.00

263.00

L.S.
L.S.

13.52
2.73

1.49
1.49

Day
Day

0.50
0.50

301.00
247.00
Total:
561.21

Add water charges @ 1% on

Add C.P & OH @15% on

566.82
Cost for 1.00 No.

DSR-12

Page 787 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 651.84
Rs 651.85

Item Code: 17.60.2.1

P/F trap of self cleansing design with screwed down or hinged grating with or without vent arm complete... 100 mm inlet and 75
mm outlet SCI S&S as per IS - 3989
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
7809
Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm
outlet
each
1.00
424.00
9999
Cement, sand and grit etc.
L.S.
13.52
1.49
9999
Carriage of materials
L.S.
2.73
1.49
0123
Mason I class
Day
0.50
301.00
0114
Beldar
Day
0.50
247.00
Total:
Add water charges @ 1% on
722.21
Add C.P & OH @15% on
729.43
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 838.84
Rs 838.85

Item Code: 17.60.2.2

P/F trap of self cleansing design with screwed down or hinged grating with or without vent arm complete... 100 mm inlet and 75
mm outlet SCI S&S as per IS - 3989
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
1898
SCI trap 100mm inlet 75mm outlet
each
1.00
198.00
9999
Cement, sand and grit etc.
L.S.
13.52
1.49
9999
Carriage of materials
L.S.
2.73
1.49
LABOUR:
0123
Mason I class
Day
0.50
301.00
0114
Beldar
Day
0.50
247.00
Total:
Add water charges @ 1% on
496.21
Add C.P & OH @15% on
501.17
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 576.35
Rs 576.35

Item Code: 17.61.1

Cutting chases in brick mason- ry walls for sand cast iron/ centrifugally cast (spun) iron pipes 100 mm dia.

Code

Description

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

MATERIALS
Cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded
stone aggregate )

DSR-12

Page 788 of 2298

04.002.05
9999
9999
0123
0114

P/L CC walls, columns, string courses, coping, bed blocks,

window sills etc. up to floor f
Plastering in cement mortar 1:4
L.S.
Carriage of materials
L.S.
LABOUR
Mason 1st class
Day
Beldar
Day

0.022

4782.36

10.40
4.16

1.49
1.49

0.14
0.27

301.00
247.00
Total:
130.53

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

131.84
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 256.83
Rs 252.10

Item Code: 17.61.2

Cutting chases in brick mason- ry walls for sand cast iron/ centrifugally cast (spun) iron pipes 75 mm dia.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
Cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded
stone aggregate )
04.002.05 P/L CC walls, columns, string courses, coping, bed blocks,
0.015
window sills etc. up to floor f
9999
Plastering in cement mortar 1:4
L.S.
7.80
9999
Carriage of materials
L.S.
3.51
LABOUR
0123
Mason 1st class
Day
0.10
0114
Beldar
Day
0.20
Add water charges @ 1% except on [A] i.e on

Rate

4782.36
1.49
1.49
301.00
247.00
Total:
96.35

Add C.P & OH @15% except on [A] i.e on

97.31
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 183.65
Rs 180.40

Item Code: 17.61.3

Cutting chases in brick mason- ry walls for sand cast iron/ centrifugally cast (spun) iron pipes 50 mm dia.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
Cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded
stone aggregate )
04.002.05 P/L CC walls, columns, string courses, coping, bed blocks,
0.008
window sills etc. up to floor f
9999
Plastering in cement mortar 1:4
L.S.
5.20
9999
Carriage of materials
L.S.
2.73
LABOUR
0123
Mason 1st class
Day
0.07
0114
Beldar
Day
0.14
Add water charges @ 1% except on [A] i.e on

Rate

4782.36
1.49
1.49
301.00
247.00
Total:
67.47

Add C.P & OH @15% except on [A] i.e on

68.14
Cost for 1.00 No.

DSR-12

Page 789 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 116.62
Rs 114.90

Item Code: 17.62

Painting CI cistern for with bitumastic paint new work .
Code

0828
4202
0834
9999
9999
0131
0114

Details of Cost for : 1.00 No.

Unit
Quantity

Description
Details of cost for one cistern with fittings
MATERIALS
Anticorrosive bitumastic paint ( of approved
quality)
Red oxide Zinc chromate yellow primer
Synthetic enamel paint
Carriage of materials
Sundries (brush sand paper etc.)
LABOUR
Painter
Beldar

Rate

litre

0.23

85.00

litre
litre
L.S.
L.S.

0.20
0.40
1.43
6.76

68.00
135.00
1.49
1.49

Day
Day

0.25
0.50

273.00
247.00
Total:
291.10

Add water charges @ 1% on

Add C.P & OH @15% on

294.01
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 338.11
Rs 338.10

Item Code: 17.63

Re-painting CI cistern with bitumastic
Code

0828
0834
9999
9999
0131
0114

Description
Details of cost for one cistern with fittings
MATERIALS
Anticorrosive bitumastic paint ( of approved quality)
Synthetic enamel paint
Polishing of wooden seat and cleaning of W.C. pan with acid
Sundries and carriage of materials
LABOUR
Painter
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

litre
litre
L.S.

0.23
0.20
20.67

85.00
135.00
1.49

L.S.

7.15

1.49

Day
Day

0.20
0.25

273.00
247.00
Total:
204.35

Add water charges @ 1% on

Add C.P & OH @15% on

206.39
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 237.35
Rs 237.35

Item Code: 17.64

Repainting CI cistern with synthetic enamel paint on the outside surface of cistern
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
0834
Synthetic enamel paint
litre
0.20

DSR-12

Rate
135.00

Page 790 of 2298

9999
0131
0114

Sundries and carriage of materials

LABOUR
Painter
Beldar

L.S.

3.64

1.49

Day
Day

0.09
0.12

273.00
247.00
Total:
86.63

Add water charges @ 1% on

Add C.P & OH @15% on

87.50
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 100.63
Rs 100.60

Item Code: 17.65.1

Painting SCI / centrifugally C(spun) I soil, waste vent pipes any colour such as chocolate grey, or buff etc. over a coat of primer (of
approved quality) for new work : 100mm dia
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
Perimeter = 3.14x 110 mm =345.71
Area 10x0.3457 = 3.46 sqm
Priming coat
13.050.03 Applying priming coat : With ready mixed red oxide zinc
3.46
20.72
chromate primer on steel galvanise
Painting two coats with paint of any colour such as chocalate,
grey or buff etc.
13.061.01 Painting with synthetic enamel paint : Two or more coats on
3.46
53.87
new work
9999
Add for delay
L.S.
17.16
1.49
Total:
Add water charges @ 1% except on [A]+[B] i.e on
25.57
Add C.P & OH @15% except on [A]+[B] i.e on
25.83
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 28.78
Rs 28.75

Item Code: 17.65.2

Painting SCI / centrifugally C(spun) I soil, waste vent pipes - paint of any colour - . over a coat of primer for new work : 75mm dia
pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
Perimeter = 3.14x82 mm = 257.71
Area = 10x0.2577 = 2.577 sqm say : 2.60sqm
13.050.03
13.061.01
9999

Applying priming coat : With ready mixed red oxide zinc Sqm
chromate primer on steel galvanise
Painting with synthetic enamel paint : Two or more coats on Sqm
new work
Add for delay
L.S.

2.60

20.72

2.60

53.87

15.21

1.49
Total:
22.66

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

22.89
Cost for 10.00 m

DSR-12

Page 791 of 2298

Rate per One Metre:

Rate as per DSR-12:

Rs 22.03
Rs 22.00

Item Code: 17.66.1

Repainting SCI / centrifugally CI (spun), soil, waste, vent pipes and fittings with paint of any colour such as chocolate, grey or buff
etc : 100 mm diameter pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
Painting one coat with paint of any colour such as
chocolate,grey or buff etc.
14.054.01 Painting with synthetic enamel paint - : One or more coats on
3.46
35.19
old work.
9999
Add for delay
L.S.
12.22
1.49
Total:
Add water charges @ 1% except on [A] i.e on
18.21
Add C.P & OH @15% except on [A] i.e on
18.39
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 14.29
Rs 14.30

Item Code: 17.66.2

Repainting SCI / centrifugally CI (spun), soil, waste, vent pipes and fittings with paint of any colour such as chocolate, grey or buff
etc : 75 mm diameter pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
Painting one coat with paint of any colour such as
chocolate,grey or buff etc.
14.054.01 Painting with synthetic enamel paint - : One or more coats on
2.577
35.19
old work.
9999
Add for delay
L.S.
9.49
1.49
Total:
Add water charges @ 1% except on [A] i.e on
14.14
Add C.P & OH @15% except on [A] i.e on
14.28
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 10.71
Rs 10.70

Item Code: 17.67

Repainting bath tub of size 1700 x 730 x 430 mm with enamel paint.
Code
0830
9999
0131
0115

Description
MATERIALS
Paint of approved quality
Sundries
LABOUR
Painter
Coolie

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

litre
L.S.

0.90
6.76

125.00
1.49

Day
Day

0.25
0.25

273.00
247.00
Total:
252.57

Add water charges @ 1% on

Add C.P & OH @15% on

255.10
Cost for 1.00 No.

DSR-12

Page 792 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 293.37
Rs 293.35

Item Code: 17.68.1

P/F vitreous china dual purpo- se closet suitable for use as squatting pan or European type water closet (Anglo Indian WC pan) :
White vitreous china dual purpose WC pan with white solid plastic seat and lid.

Code
1875
1965
7006
9999
1350
9999
9999
9999
9999
0116
0123
0114

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS
White plastic seat and lid with C.P. brass hinges and rubber
bufers etc.
White vitreous china dual prupose closet (anglo India W.C.
pan )
10 litre white vitreous china low level flushing cistern with
fittings and brackets and 40
20 mm G.I. over flow pipe and specials for over flow pipe
Mosquito proof coupling of approved municipal design
Plugs, screws etc.
Red lead, white lead and gaskin etc.
Cement,sand and grit
Carriage of materials
LABOUR
Fitter
Mason 1st class
Beldar

Rate

each

1.00

310.00

each

1.00

1250.00

each

1.00

1550.00

L.S.

276.25

1.49

each
L.S.
L.S.
L.S.
L.S.

1.00
59.15
71.76
118.43
118.43

27.00
1.49
1.49
1.49
1.49

1.00
1.00
1.00

301.00
301.00
247.00
Total:
4945.58

Day
Day
Day

Add water charges @ 1% on

Add C.P & OH @15% on

4995.04
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 5744.30
Rs 5744.30

Item Code: 17.69.1

P/F P.T.M.T waste coupling for wash basin and sink : Waste coupling 31 mmof 79 mm length and 62mm breadth wei- ghing not less
than 45 gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS :
7491
P.T.M.T. waste coupling 31/32 mm
Each
1.00
51.00
9999
Carriage of materials and fixing charges
L.S.
20.28
1.49
Total:
Add water charges @ 1% on
81.22
Add C.P & OH @15% on
82.03
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 94.33
Rs 94.35

Item Code: 17.69.2

P/F PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38mm of 83mm length and
77mm breadth, weighing not less than 60gms.
Details of Cost for : 1.00 No.

DSR-12

Page 793 of 2298

Code
7492

Description
MATERIALS:
Waste coupling 38/40 mm

9999

Carriage of materials and fixing charges

Unit

Quantity

Rate

Each

1.00

64.00

L.S.

20.28

1.49
Total:
94.22

Add water charges @ 1% on

Add C.P & OH @15% on

95.16
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 109.43
Rs 109.45

Item Code: 17.70.1

P/F PTMT Waste Bottle Trap for wash basin and sink, of approved quality and colour. Bottle trap 31mm single piece moulded with
height of 270mm, effective length of tail pipe
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7493
Bottle Trap 31/32 mm
Each
1.00
317.00
9999
Carriage of materials and fixing charges
L.S.
20.28
1.49
Total:
Add water charges @ 1% on
347.22
Add C.P & OH @15% on
350.69
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 403.29
Rs 403.30

Item Code: 17.70.2

P/F PTMT Waste Bottle Trap for wash basin and sink, of approved quality and colour. Bottle trap 38mm single piece moulded with
height of 270mm, effective length of tail pipe
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7494
Bottle Trap 38/40 mm
Each
1.00
345.00
9999
Carriage of materials and fixing charges
L.S.
20.28
1.49
Total:
Add water charges @ 1% on
375.22
Add C.P & OH @15% on
378.97
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 435.82
Rs 435.30

Item Code: 17.71

P/F PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the
same materials with snap fittings
Details of Cost for : 1.00 No.

DSR-12

Page 794 of 2298

Code
7503

Description
MATERIALS:
PTMT Liquid soap container of 400 ml. capacity

9999

Carriage of materials and fixing charges

Unit

Quantity

Rate

Each

1.00

145.00

L.S.

6.76

1.49
Total:
155.07

Add water charges @ 1% on

Add C.P & OH @15% on

156.62
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 180.11
Rs 180.10

Item Code: 17.72

P/F PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with
concealed fittings arrangement
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7504
PTMT Towel Ring 215 x 200 x 37 mm
Each
1.00
116.00
9999
Carriage of materials and fixing charges
L.S.
20.28
1.49
Total:
Add water charges @ 1% on
146.22
Add C.P & OH @15% on
147.68
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 169.83
Rs 169.85

Item Code: 17.73.1

P/F PTMT towel rail complete with brackets - concealed fitting arrangement of approved quality and colour. 450MM long towel rail -

Code
7505
09.032
0588
9999
0112
0114

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS :
P.T.M.T. towel rail 18\" (450mm)
Each
Wooden cleates
Providing 50x50x50mm 2nd class teak wood plugs fixing in
CM 1:3
25 mm CP. brass screws
100 N
Carriage of materials
L.S.
LABOUR
Carpenter 2nd class
Day
Beldar
Day

Rate

1.00

192.00

2.00

17.42

6.00
4.16

115.00
1.49

0.17
0.17

273.00
247.00
Total:
293.50

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

296.44
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 375.75
Rs 375.70

Page 795 of 2298

Item Code: 17.73.2

P/F PTMT towel rail complete with brackets - 600mm long towel rail
Code
7506
09.032
0588
9999
0112
0114

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS :
P.T.M.T. towel rail 24\" (600mm)
Each
Wooden cleats
Providing 50x50x50mm 2nd class teak wood plugs fixing in
CM 1:3
25 mm CP. brass screws
100 N
Carriage of materials
L.S.
LABOUR
Carpenter 2nd class
Day
Beldar
Day

Rate

1.00

226.00

2.00

17.42

6.00
4.16

115.00
1.49

0.17
0.17

273.00
247.00
Total:
327.50

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

330.78
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 415.24
Rs 415.20

Item Code: 17.74

P/F PTMT shelf 440 mm long, 124 mm width and 36mm height weighing not less than 300gm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS :
7507
P.T.M.T. shelf
Each
1.00
Wooden cleates
09.032
Providing 50x50x50mm 2nd class teak wood plugs fixing in
2.00
CM 1:3
0588
25 mm CP. brass screws
100 N
6.00
9999
Carriage of materials
L.S.
4.16
LABOUR
0112
Carpenter 2nd class
Day
0.17
0114
Beldar
Day
0.17
Add water charges @ 1% except on [A] i.e on

Rate
258.00
17.42
115.00
1.49
273.00
247.00
Total:
359.50

Add C.P & OH @15% except on [A] i.e on

363.10
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 452.41
Rs 452.35

Item Code: 17.75

P/F PTMT 15 mm urinal spreader size 95x69x100 mm with 15 mm BSP thread & shapes weighing not less than 60 grams.

Code
7508
9999

Description
MATERIALS :
P.T.M.T. Urinal spreader 15 mm
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
Each
L.S.

1.00
6.76

Add water charges @ 1% on

DSR-12

Rate
127.00
1.49
Total:
137.07

Page 796 of 2298

Add C.P & OH @15% on

138.44
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 159.21
Rs 159.20

Item Code: 17.76.1

P/F P.T.M.T urinal coak: 15 mm n/s 80mm long,44mm high and 30mm wide with BSP female threads weighing not less than 48
grams.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7858
P.T.M.T. Urinal cock 15mm dia
each
1.00
94.00
9999
Carriage of materials and fixing charges
L.S.
8.06
1.49
Total:
Add water charges @ 1% on
106.01
Add C.P & OH @15% on
107.07
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 123.13
Rs 123.15

Item Code: 17.77.1

P/F M.S holder bat clamps to SCI pipe comprising of M.S. flat brackets made of 50x5 mm flat of specified shape: Total bracket
length 580 mm of approved shape and design (For single 100mm dia pipe).

Code

Details of Cost for : 5.00 Nos

Unit
Quantity

Description

MATERIALS
M.S. flats 50x5mm 50x0.58= 2.90m @ 1.97 kg/metre = 5.71
kg.
M.S. flats 30x1.6mm 5x0.42 = 2.10m.
0.38kg/metre = 0.80kg.
Total = 6.51kg.
Add wastage 5% = 0.33kg.
Total = 6.86 kg.
1007
M.S.flats 6.86kg. = 0.0686 quintal
2205
Carriage of Steel
0116
Fitter (grade 1)
0103
Blacksmith 2nd class
0114
Beldar
Priming coat
5x0.58x0.11 =0.32
5x0.42x0.063 =0.13
13.050.01 Applying priming coat : With ready mixed pink or Grey primer
(hard and soft wood)
Rate as per item no 13.50.1 of SH : Finishing
9999
Sundries
P/F expansion hold fasteners 6mm threaded dia 5x4 Nos = 20
nos.
08.008.01.1 P/F expansion hold fasteners on CC/R.C.C. surface backing i/c
drilling necessary holes and

quint
tonne
Day
Day
Day

Rate

0.0686
0.0069
0.033
0.049
0.065

4250.00
77.87
301.00
273.00
247.00

0.45

25.83

1.35

1.49

20.00

22.06

Add water charges @ 1% except on [A]+[B] i.e on

Total:
333.47

L.S.

Add C.P & OH @15% except on [A]+[B] i.e on

336.80
Cost for 5.00 Nos

DSR-12

Page 797 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 168.03
Rs 168.00

Item Code: 17.77.2

P/F M.S holder bat clamps to SCI pipe comprising of M.S. flat brackets made of 50x5 mm flat of specified shape: Total bracket
length 580 mm of approved shape and design (For two 100mm dia pipe).

Code

Details of Cost for : 5.00 Nos

Unit
Quantity

Description

MATERIALS
M.S. flats 50x5mm 50x0.81= 4.05m
@ 1.97 kg/ metre = 7.98 kg.
M.S. flats 30x1.6mm 5x2x0.42 = 4.20m.
O.38kg/metre = 1.60kg.
Total = 9.58kg.
Add wastage 5% = 0.48kg.
Total = 10.06 kg.
1007
M.S.flats 10.06kg. = 0.1006 quintal
2205
Carriage of Steel
LABOUR:0116
Fitter (grade 1)
0103
Blacksmith 2nd class
0114
Beldar
Priming coat
5x0.81x0.11 =0.45
5x2x0.42x0.063 = 0.26
0.71sqm
13.050.01 Applying priming coat : With ready mixed pink or Grey primer
(hard and soft wood)
9999
Sundries
P/F expansion hold fasteners 6mm threaded dia 5x4 Nos = 20
nos.
08.008.01.1 P/F expansion hold fasteners on CC/R.C.C. surface backing i/c
drilling necessary holes and

quint
tonne

Rate

0.1006
0.0101

4250.00
77.87

0.048
0.072
0.096

301.00
273.00
247.00

0.71

25.83

1.98

1.49

20.00

22.06

Add water charges @ 1% except on [A]+[B] i.e on

Total:
489.11

Day
Day
Day

L.S.

Add C.P & OH @15% except on [A]+[B] i.e on

494.00
Cost for 5.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 205.53
Rs 205.50

Item Code: 17.77.3

P/F M.S holder bat clamps to SCI pipe comprising of M.S. flat brackets made of 50x5 mm flat of specified shape: Total bracket
length 580 mm of approved shape and design (For three 100mm dia pipe).

Code

Description

Details of Cost for : 5.00 Nos

Unit
Quantity

Rate

MATERIALS
M.S. flats 50x5mm 50x1.04= 5.20m
@ 1.97 kg/ metre = 10.24 kg.
M.S. flats 30x1.6mm 5x3x0.42 = 6.30m.
0.38kg/metre = 2.39kg.
Total = 12.63kg.
Add wastage 5% = 0.63kg.
Total = 13.26 kg.

DSR-12

Page 798 of 2298

1007
2205

M.S.flats 13.26kg. = 0.1326 quintal

Carriage of Steel
LABOUR:0116
Fitter (grade 1)
0103
Blacksmith 2nd class
0114
Beldar
PRIMING COAT
5xl.04x0.ll =0.57
5x3x0.42x0.063 = 0.40
0.97sqm
13.050.01 Applying priming coat : With ready mixed pink or Grey primer
(hard and soft wood)
9999
Sundries
P/F expansion hold fasteners 6mm threaded dia 5x4 Nos = 20
nos.
08.008.01.1 P/F expansion hold fasteners on CC/R.C.C. surface backing i/c
drilling necessary holes and

quint
tonne

0.1326
0.0133

4250.00
77.87

0.063
0.095
0.126

301.00
273.00
247.00

0.97

25.83

2.60

1.49

20.00

22.06

Add water charges @ 1% except on [A]+[B] i.e on

Total:
644.48

Day
Day
Day

L.S.

Add C.P & OH @15% except on [A]+[B] i.e on

650.92
Cost for 5.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 242.96
Rs 242.90

Item Code: 17.78

P/F white vitreous china extended wall mounting water closet of size 780x370x690 mm and white vitreous china cistern - capacity 3
litre/6 litre
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7072
Wall mounted water closet
Nos
1.00
4548.00
7073
Adjustable Vetrious China Cistern with fittings
Nos
1.00
2409.60
1875
White plastic seat (solid)with lid C.P.brass hinges and rubber each
1.00
310.00
buffers
9999
Carriage of materials
L.S.
9.79
1.49
LABOUR:
0116
Fitter (grade 1)
Day
1.00
301.00
0114
Beldar
Day
1.00
247.00
0123
Mason (brick layer) 1st class
Day
1.00
301.00
Total:
Add water charges @ 1% on
8131.19
Add C.P & OH @15% on
8212.50
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 9444.38
Rs 9444.35

Item Code: 17.79

P/F white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with
cartridge having debris catcher and hygiene seal.

Code
7074

DSR-12

Description
MATERIALS:
White Vetrious China Waterless Urinal

Details of Cost for : 1.00 No.

Unit
Quantity
Nos

1.00

Rate
13208.00

Page 799 of 2298

7075
9999
0116
0114

Cistern with fittings for Waterless Urinal

Carriage of materials
LABOUR:
Fitter (grade 1)
Beldar

Nos
L.S.

1.00
9.79

3029.60
1.49

Day
Day

0.50
0.50

301.00
247.00
Total:
16526.19

Add water charges @ 1% on

Add C.P & OH @15% on

16691.45
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 19195.17
Rs 19178.40

Item Code: 17.80

P/F white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post
flushing with water ...
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7076
White Vetrious Urinal (battery based infrared sensor operated Nos
1.00
12592.75
- 610x390x370mm)
9999
Carriage of material
L.S.
9.79
1.49
LABOUR:
0116
Fitter (grade 1)
Day
0.50
301.00
0114
Beldar
Day
0.50
247.00
Total:
Add water charges @ 1% on
12881.34
Add C.P & OH @15% on
13010.15
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 14961.67
Rs 14961.65

Item Code: 18.1.1

P/F (PE - AL - PE) composite pressure pipes conforming to IS: 15450 U.V. stablist including all special fittings of composite material
with clamps (Internal work -Exposed on walls - 1216 - 16mm OD pipes

Code
8300
8300
9999
0116
0117
0114

Description
MATERIALS
(A) PE-AL-PE Composit pipe 1216 (16 mm OD) pipe
Add 30% for fitting and wastage etc. on (A)
Cement, sand and grit
LABOUR
Fitter
Asstt. Fitter
Beldar

Details of Cost for : 10.00 m

Unit
Quantity
Metre
Metre
L.S.
Day
Day
Day

Rate

10.00
3.00
2.73

90.00
90.00
1.49

0.33
0.66
0.66

301.00
273.00
247.00
Total:
1616.60

Add water charges @ 1% on

Add C.P & OH @15% on

1632.77
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 187.77
Rs 187.75

Page 800 of 2298

Item Code: 18.1.2

P/F (PE - AL - PE) composite pressure pipes including all special fittings of composite material . with clamps (Internal work exposed
on wall): 1620 (20 mm O/D) pipe.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
Details of cost for 10 metre
MATERIALS
8301
(A) PE-AL-PE Composit pipe 1620 (20 mm OD) pipe
Metre
13.00
111.00
(including 30% for fitting and wastage etc. on (A))
9999
Cement;sand and grit.
L.S.
2.73
1.49
LABOUR
0116
Fitter
Day
0.33
301.00
0117
Asstt. Fitter
Day
0.82
273.00
0114
Beldar
Day
0.66
247.00
Total:
Add water charges @ 1% on
1933.28
Add C.P & OH @15% on
1952.61
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 224.55
Rs 224.55

Item Code: 18.1.3

P/F (PE - AL - PE) composite pressure pipes including all special fittings of composite material . with clamps (Internal work exposed
on wall): 2025 (25 mm O/D) pipe.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8302
(A) PE-AL-PE Composit pipe 2025 (25 mm OD)
Metre
13.00
143.00
Including 30% for fitting and wasteage on (A)
9999
Cement, Sand and grit
L.S.
2.73
1.49
LABOUR
0116
Fitter
Day
0.33
301.00
0117
Asstt. Fitter
Day
0.98
273.00
0114
Beldar
Day
0.66
247.00
Total:
Add water charges @ 1% on
2392.96
Add C.P & OH @15% on
2416.89
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 277.94
Rs 277.95

Item Code: 18.1.4

P/F (PE - AL - PE) composite pressure pipes including all special fittings of composite material . with clamps (Internal work exposed
on wall): 2532 (25 mm O/D) pipe.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8303
(A) PE-AL-PE Composit pressure pipe
Metre
13.00
193.00
Including 30% for fitting and wastage on (A)
9999
Cement, sand and grit
L.S.
4.16
1.49
LABOUR
0116
Fitter
Day
0.33
301.00
0117
Asstt. Fitter
Day
0.98
273.00

DSR-12

Page 801 of 2298

0114

Beldar

Day

0.98

Add water charges @ 1% on

247.00
Total:
3124.13

Add C.P & OH @15% on

3155.37
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 362.87
Rs 362.85

Item Code: 18.1.5

P/F (PE - AL - PE) composite pressure pipes including all special fittings of composite material . with clamps (Internal work exposed
on wall): 3240 (40 mm O/D) pipe.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8304
(A) PE-AL-PE Composit pipe 3240 (40 mm OD)
Metre
13.00
310.00
Including 30% for fittings and wastage etc on (A)
9999
Cement, sand and grit
L.S.
5.33
1.49
LABOUR
0116
Fitter
Day
0.33
301.00
0117
Asstt. Fitter
Day
1.31
273.00
0114
Beldar
Day
1.31
247.00
Total:
Add water charges @ 1% on
4818.47
Add C.P & OH @15% on
4866.65
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 559.67
Rs 559.65

Item Code: 18.1.6

P/F (PE - AL - PE) composite pressure pipes including all special fittings of composite material . with clamps (Internal work exposed
on wall): 4050 (50 mm O/D) pipe.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8305
(A) 4050mm PE-AL-PE Composit pressure pipe
Metre
13.00
335.00
Including Add 30% for fittings and wastage etc on (A)
9999
Cement, sand and grit
L.S.
5.33
1.49
LABOUR
0116
Fitter
Day
0.33
301.00
0117
Asstt. Fitter
Day
1.31
273.00
0114
Beldar
Day
1.31
247.00
Total:
Add water charges @ 1% on
5143.47
Add C.P & OH @15% on
5194.90
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 597.41
Rs 597.40

Item Code: 18.2.1

P/F (PE - AL - PE) composite pressure pipes all fittings with clamps (Internal work exposed on wall): (concealed work ) 1620 (20 mm
O/D) pipe.

DSR-12

Page 802 of 2298

Code
8300

18.078

0116
0117
0114

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS
(A) PE-AL-PE Composit pipe 1216 (16 mm OD)
Including 75% for fitting,clamps and wastage etc on (A)
Making chases upto 7.5 x 7.5 cm. in walls and making good
the same
Making chases up to 7.5x7.5 cm in walls i.. after housing G.I.
pipe etc.
LABOUR
Fitter
Asstt. Fitter
Beldar

Metre

Day
Day
Day

Rate

17.50

90.00

10.00

64.49

0.33
0.66
0.66

301.00
273.00
247.00
Total:
2017.53

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

2037.71
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 298.83
Rs 297.95

Item Code: 18.2.2

P/F (PE - AL - PE) composite pressure pipes all fittings with clamps (Internal work exposed on wall): (concealed work ) 1620 (20 mm
O/D) pipe.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8301
(A) PE-AL-PE Composit pipe 1620 (20 mm OD)
Metre
17.50
111.00
Including Add 75% for fittings, claps and wastage etc on (A)

18.078

0116
0117
0114

Making chases upto 7:5 x 7.5 cm. in walls and making good
the same
Making chases up to 7.5x7.5 cm in walls i.. after housing G.I.
pipe etc.
LABOUR
Fitter
Day
Asstt. Fitter
Day
Beldar
Day

10.00

64.49

0.33
0.66
0.66

301.00
273.00
247.00
Total:
2385.03

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

2408.88
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 341.51
Rs 340.60

Item Code: 18.2.3

P/F (PE - AL - PE) composite pressure pipes all fittings with clamps (Internal work exposed on wall): (concealed work ) 2025 (25 mm
O/D) pipe.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8302
(A) PE-AL-PE Composit pipe 2025 (25 mm OD)
Metre
17.50
143.00
Adding 75 % for fittings clamps and wastage etc on (A)
Makings chases upto 7.5 x 7.5 cm. in walls and making good
the same

DSR-12

Page 803 of 2298

18.078

0116
0117
0114

Making chases up to 7.5x7.5 cm in walls i.. after housing G.I.

pipe etc.
LABOUR
Fitter
Day
Asstt.Fitter
Day
Beldar
Day

10.00

64.49

0.33
0.66
0.66

301.00
273.00
247.00
Total:
2945.03

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

2974.48
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 406.56
Rs 405.65

Item Code: 18.2.4

P/F (PE - AL - PE) composite pressure pipes all fittings with clamps (Internal work exposed on wall): (concealed work ) 2532 (32 mm
O/D) pipe.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8303
(A) PE-AL-PE Composit pipe 2532 (32 mm OD)
Metre
17.50
193.00
Adding 75% for fittings, clamps and wastage etc on (A)
Making chases upto 7.5 x 7.5 cm. in walls and making good
the same
18.078
Making chases up to 7.5x7.5 cm in walls i.. after housing G.I.
10.00
64.49
pipe etc.
LABOUR
0116
Fitter
Day
0.33
301.00
0117
Asstt. Fitter
Day
0.66
273.00
0114
Beldar
Day
0.66
247.00
Total:
Add water charges @ 1% except on [A] i.e on
3820.03
Add C.P & OH @15% except on [A] i.e on
3858.23
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 508.19
Rs 507.30

Item Code: 18.3.1

P/F (PE - AL - PE) composite pressure pipes etc. trenching and refilling. (External work): 1216 (16 mm O/D) pipe.

Code
8300

0116
0114
0114
0115

DSR-12

Description
MATERIALS
(A) PE-AL-PE Composit pipe 1216 (16 mm OD)
Including 30% for fittings and wastage etc on (A)
LABOUR
Fitter
Beldar
Trenching and refilling etc.
Beldar
Coolie

Details of Cost for : 10.00 m

Unit
Quantity
Metre

Rate

13.00

90.00

Day
Day

0.08
0.16

301.00
247.00

Day
Day

0.66
0.66

Add water charges @ 1% on

247.00
247.00
Total:
1559.64

Add C.P & OH @15% on

1575.24

Page 804 of 2298

Cost for 10.00 m

Rate per One Metre:
Rate as per DSR-12:

Rs 181.15
Rs 181.15

Item Code: 18.3.2

P/F (PE - AL - PE) composite pressure pipes etc. trenching and refilling. (External work): 1620 (20 mm O/D) pipe.

Code
8301

0116
0114
0114
0115

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS
(A) PE-AL-PE Composit pipe 1620 (20 mm OD)
Including 30% for fitting and wastage etc on (A)
LABOUR:
Fitter
Beldar
Trenching and refilling etc.
Beldar
Coolie

Metre

Rate

13.00

111.00

Day
Day

0.08
0.16

301.00
247.00

Day
Day

0.66
0.66

247.00
247.00
Total:
1832.64

Add water charges @ 1% on

Add C.P & OH @15% on

1850.97
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 212.86
Rs 212.85

Item Code: 18.3.3

P/F (PE - AL - PE) composite pressure pipes etc. trenching and refilling. (External work): 2025 (25 mm O/D) pipe.

Code
8302

0116
0114
0114
0115

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS
(A) 2025mm PE-AL-PE Composit pipe 2025 (25 mm OD) Pipe
Including 30% for fittings and wastage etc on (A)
LABOUR
Fitter
Beldar
Trenching and refilling etc.
Beldar
Coolie

Metre

Rate

13.00

143.00

Day
Day

0.08
0.16

301.00
247.00

Day
Day

0.66
0.66

247.00
247.00
Total:
2248.64

Add water charges @ 1% on

Add C.P & OH @15% on

2271.13
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 261.18
Rs 261.20

Item Code: 18.3.4

P/F (PE - AL - PE) composite pressure pipes etc. trenching and refilling. (External work): 2532 (32 mm O/D) pipe.

Code

DSR-12

Description

Details of Cost for : 10.00 m

Unit
Quantity

Rate

Page 805 of 2298

8303

0116
0114
0114
0115

MATERIALS
(A) 2532 mm PE-AL-PE Composit pressure pipe
Including 30% for fittings and wastage etc. on (A)
LABOUR
Fitter
Beldar
Trenching and refilling etc.
Beldar
Coolie

Metre

13.00

193.00

Day
Day

0.08
0.16

301.00
247.00

Day
Day

0.66
0.66

247.00
247.00
Total:
2898.64

Add water charges @ 1% on

Add C.P & OH @15% on

2927.63
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 336.68
Rs 336.70

Item Code: 18.3.5

P/F (PE - AL - PE) composite pressure pipes etc. trenching and refilling. (External work): 3240 (40 mm O/D) pipe.

Code
8304

0116
0114
0114
0115

Description
MATERIALS
(A) PE-AL-PE Composit pipe 3240 (40 mm OD) Pipe
Including Add 30% for fittings and wastage etc on(A)
LABOUR
Fitter
Beldar
Trenching and refilling etc.
Beldar
Coolie

Details of Cost for : 10.00 m

Unit
Quantity
Metre

Rate

13.00

310.00

Day
Day

0.16
0.33

301.00
247.00

Day
Day

0.66
0.66

247.00
247.00
Total:
4485.71

Add water charges @ 1% on

Add C.P & OH @15% on

4530.57
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 521.02
Rs 521.00

Item Code: 18.3.6

P/F (PE - AL - PE) composite pressure pipes etc. trenching and refilling. (External work): 4050 (50 mm O/D) pipe.

Code
8305

0116
0114
0114
0115

Description
MATERIALS
(A) 4050mm PE-Al-PE Composit pressure pipe
Including 30% for fittings and wastage etc on (A)
LABOUR
Fitter
Beldar
Trenching and refilling etc.
Beldar
Coolie

Details of Cost for : 10.00 m

Unit
Quantity
Metre

13.00

335.00

Day
Day

0.16
0.33

301.00
247.00

Day
Day

0.66
0.66

247.00
247.00
Total:
4810.71

Add water charges @ 1% on

DSR-12

Rate

Page 806 of 2298

Add C.P & OH @15% on

4858.82
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 558.76
Rs 558.75

Item Code: 18.4.1

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes SDR 7.4 PP- R plain and brass threaded polypropylene random fittings,
clamps (Internal work - Exposed on wall): PN - 16 Pipe, 16 mm O/D.

Code
8625
9999
0116
0117
0114

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS
(A) 3 layer PP-R pipe (PN-16/SDR 7.4) 16mm outer dia
Including 30% for fittings and wastage etc on (A)
Cement, sand and grit
LABOUR
Fitter
Asstt. Fitter
Beldar

Metre

Rate

13.00

32.00

L.S.

2.73

1.49

Day
Day
Day

0.33
0.66
0.66

301.00
273.00
247.00
Total:
862.60

Add water charges @ 1% on

Add C.P & OH @15% on

871.23
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 100.19
Rs 100.20

Item Code: 18.4.2

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes SDR 7.4 PP- R plain and brass threaded polypropylene random fittings,
clamps (Internal work - Exposed on wall): PN - 16 Pipe, 20 mm O/D.

Code
8626
9999
0116
0117
0114

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS
(A) 3 layer PP-R pipe (PN-16/SDR 7.4) 20 mm outer dia
Including 30% for fittingsand wastage etc on (A)
Cement, sand and grit
LABOUR
Fitter
Asstt. Fitter
Beldar

Metre

Rate

13.00

50.00

L.S.

2.73

1.49

Day
Day
Day

0.33
0.82
0.66

301.00
273.00
247.00
Total:
1140.28

Add water charges @ 1% on

Add C.P & OH @15% on

1151.68
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 132.44
Rs 132.45

Item Code: 18.4.3

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes SDR 7.4 PP- R plain and brass threaded polypropylene random fittings,
clamps (Internal work - Exposed on wall): PN - 16 Pipe, 25 mm O/D.
Details of Cost for : 10.00 m

DSR-12

Page 807 of 2298

Code
8627
9999
0116
0117
0114

Description
MATERIALS
(A) 3 layer PP-R pipe (PN-16/SDR 7.4) 25 mm outer dia.
Including 30% for fitting and wastage etc on (A)
Cement, sand and grit
LABOUR
Fitter
Asstt. Fitter
Beldar

Unit

Quantity

Rate

13.00

76.00

L.S.

2.73

1.49

Day
Day
Day

0.33
0.98
0.66

301.00
273.00
247.00
Total:
1521.96

Metre

Add water charges @ 1% on

Add C.P & OH @15% on

1537.18
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 176.78
Rs 176.80

Item Code: 18.4.4

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes SDR 7.4 PP- R plain and brass threaded polypropylene random fittings,
clamps (Internal work - Exposed on wall): PN - 16 Pipe, 32 mm O/D.

Code
8628
9999
0116
0117
0114

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS
(A) 3 layer PP-R pipe (PN-16/SDR 7.4) 32 mm outer dia.
Including 30% for fitting and wastage etc on (A)
Cement, sand and grit
LABOUR
Fitter
Asstt. Fitter
Beldar

Metre

Rate

13.00

124.00

L.S.

4.16

1.49

Day
Day
Day

0.33
0.98
0.98

301.00
273.00
247.00
Total:
2227.13

Add water charges @ 1% on

Add C.P & OH @15% on

2249.40
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 258.68
Rs 258.70

Item Code: 18.4.5

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes SDR 7.4 PP- R plain and brass threaded polypropylene random fittings,
clamps (Internal work - Exposed on wall): PN - 16 Pipe, 40 mm O/D.

Code
8629
9999
0116
0117
0114

Description
MATERIALS
(A) 3 layer PP-R pipe (PN-16/SDR 7.4) 40 mm outer dia
Including 30% fittings wastage etc on (A)
Cement sand and grit
LABOUR
Fitter
Asstt. Fitter
Beldar

Details of Cost for : 10.00 m

Unit
Quantity
Metre

13.00

196.00

L.S.

5.33

1.49

Day
Day
Day

0.33
1.31
1.31

301.00
273.00
247.00
Total:
3336.47

Add water charges @ 1% on

DSR-12

Rate

Page 808 of 2298

Add C.P & OH @15% on

3369.83
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 387.53
Rs 387.55

Item Code: 18.4.6

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes SDR 7.4 PP- R plain and brass threaded polypropylene random fittings,
clamps (Internal work - Exposed on wall): PN - 16 Pipe, 50 mm O/D.

Code
8630
9999
0116
0117
0114

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS
(A) 3 layer PP-R pipe (PN-16/SDR 7.4) 50 mm outer dia
Including 30% for fittings and wastage etc on (A)
Cement, sandand grit
LABOUR
Fitter
Asstt. Fitter
Beldar

Metre

Rate

13.00

286.00

L.S.

5.33

1.49

Day
Day
Day

0.33
1.31
1.31

301.00
273.00
247.00
Total:
4506.47

Add water charges @ 1% on

Add C.P & OH @15% on

4551.53
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 523.43
Rs 523.45

Item Code: 18.5.1

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP- R plain and brass threaded polypropylene random fittings,
clamps : PN - 16 Pipe, 16 mm O/D.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8625
(A) 3 layer PP-R pipe (PN-16/SDR 7.4) 16 mm outer dia
Metre
17.50
32.00
Including 75% for fitting clamps and wastage etc on (A)
Making chases upto 7.5 x 7.5 cm. in walls and making good
the same
18.078
Making chases up to 7.5x7.5 cm in walls i.. after housing G.I.
10.00
64.49
pipe etc.
LABOUR
0116
Fitter
Day
0.33
301.00
0117
Asstt. Fitter
Day
0.66
273.00
0114
Beldar
Day
0.66
247.00
Total:
Add water charges @ 1% except on [A] i.e on
1002.53
Add C.P & OH @15% except on [A] i.e on
1012.56
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 180.93
Rs 180.05

Item Code: 18.5.2

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP- R plain and brass threaded polypropylene random fittings,
clamps : PN - 16 Pipe, 20 mm O/D.

DSR-12

Page 809 of 2298

Code
8626

18.078

0116
0117
0114

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS
(A) 3 layer PP-R pipe (PN-16/SDR 7.4) 20 mm outer dia
Add 75% for fitting, clamps and wastage etc on (A)
Making chase upto 7.5 x 7.5 cm. in walls and making good the
same
Making chases up to 7.5x7.5 cm in walls i.. after housing G.I.
pipe etc.
LABOUR
Fitter
Asstt. Fitter
Beldar

Metre

Day
Day
Day

Rate

17.50

50.00

10.00

64.49

0.33
0.66
0.66

301.00
273.00
247.00
Total:
1317.53

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

1330.71
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 217.52
Rs 216.65

Item Code: 18.5.3

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP- R plain and brass threaded polypropylene random fittings,
clamps :PN - 16 Pipe, 25 mm O/D.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8627
(A) 3 layer PP-R pipe (PN-16/SPR 7.4) 25 mm quter dia
Metre
17.50
76.00
Including 75 % for fittings clamps and wastage etc on(A)
Making chases upto 7.5 x 7.5 cm! in walls and making good
the same
18.078
Making chases up to 7.5x7.5 cm in walls i.. after housing G.I.
10.00
64.49
pipe etc.
LABOUR
0116
Fitter
Day
0.33
301.00
0117
Asstt. Fitter
Day
0.66
273.00
0114
Beldar
Day
0.66
247.00
Total:
Add water charges @ 1% except on [A] i.e on
1772.53
Add C.P & OH @15% except on [A] i.e on
1790.26
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 270.37
Rs 269.50

Item Code: 18.5.4

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes SDR 7.4 U.V. stablized and anti-microbial fusion welded, i/c all PP- R
plain and brass threaded polypropylene random fittings, clamps at one meter spacing. i/c cutting chases and making the same.:

Code
8628

DSR-12

Description
MATERIALS
(A) 3 layer PP-R pipe (PN-16/SDR 7.4) 32 mm outer dia
Add 75 % for fittings clamps and wastage etc on(A)

Details of Cost for : 10.00 m

Unit
Quantity
Metre

17.50

Rate
124.00

Page 810 of 2298

18.078

0116
0117
0114

Making haseiupto 7.5 x 7.5 cm. in walls and making good the
same
Making chases up to 7.5x7.5 cm in walls i.. after housing G.I.
pipe etc.
LABOUR
Fitter
Day
Asstt. Fitter
Day
Beldar
Day

10.00

64.49

0.33
0.66
0.66

301.00
273.00
247.00
Total:
2612.53

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

2638.66
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 367.94
Rs 367.05

Item Code: 18.6.1

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes UV stablized and anti-micro- bial fusion welded, i/c all PP-R plain and
brass threaded polypropylene random fittings, including trenchin, refilling & testing (External work): PN - 16 Pipe, 15 mm O

Code
8625

0116
0114
0114
0115

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS
(A) 3 layer PP-R pipe (PN-16/SDR 7.4) 16 mm outer dia
Including 30% for fittings and wastage etc on (A)
LABOUR
Fitter
Beldar
Trenching and refilling etc.
Beldar
Coolie

Metre

Rate

13.00

32.00

Day
Day

0.08
0.16

301.00
247.00

Day
Day

0.66
0.66

247.00
247.00
Total:
805.64

Add water charges @ 1% on

Add C.P & OH @15% on

813.70
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 93.58
Rs 93.60

Item Code: 18.6.2

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP-R fittings, including trenching refilling (External work): PN - 16
Pipe, 20 mm OD (SDR-7.4).
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8626
(A) 3 layer PP-R pipe (PN-16/SDR 7.4) 20 mm outer dia
Metre
13.00
50.00
Including 30 % for fittings and wastage etc on (A)
LABOUR
0116
Fitter
Day
0.08
301.00
0114
Beldar
Day
0.16
247.00
Trenching and refilling etc.
0114
Beldar
Day
0.66
247.00
0115
Coolie
Day
0.66
247.00
Total:
Add water charges @ 1% on
1039.64

DSR-12

Page 811 of 2298

Add C.P & OH @15% on

1050.04
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 120.76
Rs 120.75

Item Code: 18.6.3

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP-R fittings, including trenching refilling (External work): PN 16 Pipe, 25 mm OD (SDR-7.4).
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8627
(A) 3 layer PP-R pipe (PN-16/SDR 7.4) 25 mm outer dia
Metre
13.00
76.00
Including 30% for fitting and wastage etc on (A)
LABOUR
0116
Fitter
Day
0.12
301.00
0114
Beldar
Day
0.25
247.00
Trenching and refilling etc.
0114
Beldar
Day
0.66
247.00
0115
Coolie
Day
0.66
247.00
Total:
Add water charges @ 1% on
1411.91
Add C.P & OH @15% on
1426.03
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 163.99
Rs 164.00

Item Code: 18.6.4

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP-R fittings, including trenching refilling (External work): PN - 16
Pipe, 32 mm OD (SDR-7.4).
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8628
(A) 3 layer PP-R pipe (PN-16/SDR 7.4) 32 mm (inc 30% for Metre
13.00
124.00
fitting and wastage etc)
LABOUR
0116
Fitter
Day
0.12
301.00
0114
Beldar
Day
0.25
247.00
Trenching and refilling etc.
0114
Beldar
Day
0.66
247.00
0115
Coolie
Day
0.66
247.00
Total:
Add water charges @ 1% on
2035.91
Add C.P & OH @15% on
2056.27
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 236.47
Rs 236.45

Item Code: 18.6.5

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP-R fittings, including trenching refilling (External work): PN 16 Pipe, 40 mm OD (SDR-7.4).
Details of Cost for : 10.00 m

DSR-12

Page 812 of 2298

Code
8629

0116
0114
0114
0115

Description
MATERIALS
(A) 3 1ayer PP-R pipe(PN-16/SDR7.4) 40mm outer dia
Including 30% for fitting and wastage etc on (A)
LABOUR
Fitter
Beldar
Trenching and refilling etc.
Beldar
Coolie

Unit

Quantity

Rate

13.00

196.00

Day
Day

0.16
0.33

301.00
247.00

Day
Day

0.66
0.66

247.00
247.00
Total:
3003.71

Metre

Add water charges @ 1% on

Add C.P & OH @15% on

3033.75
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 348.88
Rs 348.90

Item Code: 18.6.6

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP-R fittings, including trenching refilling (External work): PN 16 Pipe, 50 mm OD (SDR-7.4).
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8630
(A) 3 layer PP-R pipe (PN-16/SDR 7.4) 50 mm quter dia
Metre
13.00
286.00
including 30% for fitting and wastage etc on (A)
LABOUR
0116
Fitter
Day
0.16
301.00
0114
Beldar
Day
0.33
247.00
Trenching and refilling etc.
0114
Beldar
Day
0.66
247.00
0115
Coolie
Day
0.66
247.00
Total:
Add water charges @ 1% on
4173.71
Add C.P & OH @15% on
4215.45
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 484.78
Rs 484.80

Item Code: 18.6.7

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP-R fittings, including trenching refilling (External work): PN 16 Pipe, 63 mm OD (SDR-7.4).
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8631
(A) 3 layer PP-R pipe (PN-16/SPR 7.4) 63 mm outer dia
Metre
13.00
445.00
including 30% for fitting and wastage etc on (A)
LABOUR
0116
Fitter
Day
0.25
301.00
0114
Beldar
Day
0.66
247.00
Trenching and refilling etc.
0114
Beldar
Day
0.66
247.00
0115
Coolie
Day
0.66
247.00
Total:
Add water charges @ 1% on
6349.31

DSR-12

Page 813 of 2298

Add C.P & OH @15% on

6412.80
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 737.47
Rs 737.45

Item Code: 18.6.8

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes UV stablized and anti-micro- bial fusion welded, i/c all PP-R plain and
brass threaded polypropylene random fittings, including trenchin, refilling & testing (External work): PN - 16 Pipe, 75 mm O

Code
8632

0116
0114
0114
0115

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS
(A) 3 layer PP-R pipe (PN-16/SDR 7.4) 75 mm outer dia
including 30% for fitting and wastage etc on (A)
LABOUR
Fitter
Beldar
Trenching and refilling etc.
Beldar
Coolie

Metre

Rate

13.00

640.00

Day
Day

0.25
0.66

301.00
247.00

Day
Day

0.66
0.66

247.00
247.00
Total:
8884.31

Add water charges @ 1% on

Add C.P & OH @15% on

8973.15
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1031.91
Rs 1031.90

Item Code: 18.6.9

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP-R fittings, including trenching refilling (External work): PN 16 Pipe, 90 mm OD (SDR-7.4).
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8633
(A) 3 layer PP-R pipe (PN-16/SDR 7.4) 90 mm outer dia
Metre
13.00
1020.00
Including 30% for fitting and wastage etc on (A)
LABOUR
0116
Fitter
Day
0.37
301.00
0114
Beldar
Day
0.97
247.00
Trenching and refilling etc.
0114
Beldar
Day
0.80
247.00
0115
Coolie
Day
0.80
247.00
Total:
Add water charges @ 1% on
14006.16
Add C.P & OH @15% on
14146.22
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1626.82
Rs 1626.80

Item Code: 18.6.10

DSR-12

Page 814 of 2298

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes i/c all PP-R fittings, including trenching refilling (External work): PN 10 Pipe, 110 mm OD (SDR-11).
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8634
(A) 3 layer PP-R pipe (PN-16/SDR 7.4)110 mm outer dia
Metre
13.00
1070.00
including 30% for fitting and wastage etc
LABOUR
0116
Fitter
Day
0.37
301.00
0114
Beldar
Day
0.97
247.00
Trenching and refilling etc.
0114
Beldar
Day
0.80
247.00
0115
Coolie
Day
0.80
247.00
Total:
Add water charges @ 1% on
14656.16
Add C.P & OH @15% on
14802.72
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1702.31
Rs 1702.30

Item Code: 18.6.11

P/F 3 layer PP-R (Polypropy- lene Random copolymer) pipes UV stablized and anti-micro- bial fusion welded, i/c all PP-R plain and
brass threaded polypropylene random fittings, including trenchin, refilling & testing (External work): PN - 10 Pipe, 160 mm

Code
8635

0116
0114
0114
0115

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS
(A) 3 layer PP-R pipe (PN-16/SDR7.4) 160 mm outer dia
Including 30% for fitting and wastage etc
LABOUR
Fitter
Beldar
Trenching and refilling etc.
Beldar
Coolie

Metre

Rate

13.00

2255.00

Day
Day

0.58
1.54

301.00
247.00

Day
Day

1.20
1.20

247.00
247.00
Total:
30462.76

Add water charges @ 1% on

Add C.P & OH @15% on

30767.39
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 3538.25
Rs 3538.25

Item Code: 18.7.1

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 15 mm
nominal outer dia .Pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
8636
Chlorinated Polyvinyl - Chloride (CPVC) pipe 15 mm outer dia. metre
13.00
51.00

9999

DSR-12

(Adding 30% for fittings and wastage)

Cement, sand and grit etc.
LABOUR:

L.S.

2.73

1.49

Page 815 of 2298

0116
0117
0114

Fitter grade-I
Assistant Fitter or II class Fitter
Beldar

Day
Day
Day

0.33
0.82
0.66

Add water charges @ 1% on

301.00
273.00
247.00
Total:
1153.28

Add C.P & OH @15% on

1164.81
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 133.95
Rs 133.95

Item Code: 18.7.2

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 20 mm
nominal outer dia .Pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
8637
Chlorinated Polyvinyl - Chloride (CPVC) pipe 20 mm outer dia. metre
13.00
63.00

9999
0116
0117
0114

(Adding 30% for fitings wastage)

Cement, sand and grit etc.
LABOUR:
Fitter grade-I
Assistant Fitter or II class Fitter
Beldar

L.S.

2.73

1.49

Day
Day
Day

0.33
0.98
0.66

301.00
273.00
247.00
Total:
1352.96

Add water charges @ 1% on

Add C.P & OH @15% on

1366.49
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 157.15
Rs 157.15

Item Code: 18.7.3

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 25 mm
nominal outer dia .Pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
8638
Chlorinated Polyvinyl - Chloride (CPVC) pipe 25 mm outer dia. metre
13.00
90.00

9999
0116
0117
0114

(Adding 30% forfittings and wastage)

Cement, sand and grit etc.
LABOUR:
Fitter grade-I
Assistant Fitter or II class Fitter
Beldar

L.S.

2.73

1.49

Day
Day
Day

0.33
0.98
0.66

301.00
273.00
247.00
Total:
1703.96

Add water charges @ 1% on

Add C.P & OH @15% on

1721.00
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 197.92
Rs 197.90

Page 816 of 2298

Item Code: 18.7.4

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 32 mm
nominal outer dia .Pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8639
(A) 32mm outer dia CPVC pipe
metre
13.00
120.00
Add 30% for fitting and wastage etc on (A)
9999
Cement, sanaand gritetcai
L.S.
4.16
1.49
LABOUR
0116
Fitter
Day
0.33
301.00
0117
Asstt. Fitter
Day
0.98
273.00
0114
Beldar
Day
0.98
247.00
Total:
Add water charges @ 1% on
2175.13
Add C.P & OH @15% on
2196.88
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 252.64
Rs 252.65

Item Code: 18.7.5

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 40 mm
nominal outer dia .Pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8640
(A) 40 mm outer dia CPVC Pipe
metre
13.00
170.00
Add 30% for fitting and wastage etc on (A)
9999
Cement, sand & grit
L.S.
5.33
1.49
LABOUR
0116
Fitter
Day
0.33
301.00
0117
Asstt. Fitter
Day
1.31
273.00
0114
Beldar
Day
1.31
247.00
Total:
Add water charges @ 1% on
2998.47
Add C.P & OH @15% on
3028.45
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 348.27
Rs 348.25

Item Code: 18.7.6

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 50 mm
nominal outer dia .Pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
8641
Chlorinated Polyvinyl - Chloride (CPVC) pipe 50 mm outer dia.
metre
9999
0116

DSR-12

(30% added for fittings and wastage etc)

Cement, sand and grit etc
LABOUR:
Fitter grade-I

13.00

280.00

L.S.

5.33

1.49

Day

0.33

301.00

Page 817 of 2298

0117
0114

Assistant Fitter or II class Fitter

Beldar

Day
Day

1.31
1.31

Add water charges @ 1% on

273.00
247.00
Total:
4428.47

Add C.P & OH @15% on

4472.75
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 514.37
Rs 514.35

Item Code: 18.8.1

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 15 mm
nominal outer dia .Pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8636
(A) 15 mmouter dia CPVC Pipe
metre
17.50
51.00
Add 75% for fitting and wastage etc on (A)
Making chases upto 7.5x7.5 cm.in walls and making good the
same
18.078
Making chases up to 7.5x7.5 cm in walls i.. after housing G.I.
10.00
64.49
pipe etc.
LABOUR
0116
Fitter
Day
0.33
301.00
0117
Asstt. Fitter
Day
0.66
273.00
0114
Beldar
Day
0.66
247.00
Total:
Add water charges @ 1% except on [A] i.e on
1335.03
Add C.P & OH @15% except on [A] i.e on
1348.38
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 219.55
Rs 218.65

Item Code: 18.8.2

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 20 mm
nominal outer dia .Pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8637
(A) 20 mm outerdia CPVC pipe
metre
17.50
63.00
Add 75% for fitting and wastage etc on (A)
Making chases upto 7.5x7.5 cm in walls and making good the
same
18.078
Making chases up to 7.5x7.5 cm in walls i.. after housing G.I.
10.00
64.49
pipe etc.
LABOUR
0116
Fitter
Day
0.33
301.00
0117
Asstt. Fitter
Day
0.66
273.00
0114
Beldar
Day
0.66
247.00
Total:
Add water charges @ 1% except on [A] i.e on
1545.03
Add C.P & OH @15% except on [A] i.e on
1560.48
Cost for 10.00 m

DSR-12

Page 818 of 2298

Rate per One Metre:

Rate as per DSR-12:

Rs 243.95
Rs 243.05

Item Code: 18.8.3

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 25 mm
nominal outer dia .Pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8638
(A) 25 mm outerdia CPVC
metre
17.50
90.00
Add 75% for fitting and wastage etc on (A)
Making chases upto 7.5x7.5 cm in walls and making good the
same
18.078
Making chases up to 7.5x7.5 cm in walls i.. after housing G.I.
10.00
64.49
pipe etc.
LABOUR
0116
Fitter
Day
0.33
301.00
0117
Asstt. Fitter
Day
0.66
273.00
0114
Beldar
Day
0.66
247.00
Total:
Add water charges @ 1% except on [A] i.e on
2017.53
Add C.P & OH @15% except on [A] i.e on
2037.71
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 298.83
Rs 297.95

Item Code: 18.8.4

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... 32 mm
nominal outer dia .Pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8639
(A) 32 mm outer dia CPVC pipe
metre
17.50
120.00
Add 75% for fillings clamps, wastage etc. on (A)
Making chases upto 7.5 7.5 cm in walls and making good the
same
18.078
Making chases up to 7.5x7.5 cm in walls i.. after housing G.I.
10.00
64.49
pipe etc.
LABOUR
0116
Fitter
Day
0.33
301.00
0117
Asstt. Fitter
Day
0.66
273.00
0114
Beldar
Day
0.66
247.00
Total:
Add water charges @ 1% except on [A] i.e on
2542.53
Add C.P & OH @15% except on [A] i.e on
2567.96
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 359.81
Rs 358.90

Item Code: 18.9.1

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... External
work 15 mm nominal outer dia .Pipes.
Details of Cost for : 10.00 m

DSR-12

Page 819 of 2298

Code
8636

0116
0114
0114
0115

Description
MATERIALS
(A) 15 mm outer dia CPVC pipe
Add 30% for fillings and wastage etc. on (A)
LABOUR
Fitter
Belder
Trenching and refilling etc.
Beldar
Coolie

Unit

Quantity

Rate

13.00

51.00

Day
Day

0.08
0.16

301.00
247.00

Day
Day

0.66
0.66

247.00
247.00
Total:
1052.64

metre

Add water charges @ 1% on

Add C.P & OH @15% on

1063.17
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 122.27
Rs 122.25

Item Code: 18.9.2

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... External
work 20 mm nominal outer dia .Pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
8637
Chlorinated Polyvinyl - Chloride (CPVC) pipe 20 mm outer dia.

0116

0114
0114

0115

Fitter grade-I
(30% added for fittings and wastage etc.,)
LABOUR:
Beldar
Beldar
Trenching and refilling etc.
Coolie

metre
Day

13.00
0.08

63.00
301.00

Day
Day

0.16
0.66

247.00
247.00

Day

0.66

247.00
Total:
1208.64

Add water charges @ 1% on

Add C.P & OH @15% on

1220.73
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 140.38
Rs 140.40

Item Code: 18.9.3

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... External
work 25 mm nominal outer dia .Pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8638
(A) 25 mm nominal outer dia CPVC pipe
metre
13.00
90.00
Add 30% for fillings and wastage etc. on (A)
LABOUR
0116
Fitter
Day
0.12
301.00
0114
Beldar
Day
0.25
247.00
Trenching and refilling etc.
0114
Beldar
Day
0.66
247.00

DSR-12

Page 820 of 2298

0115

Coolie

Day

0.66

Add water charges @ 1% on

247.00
Total:
1593.91

Add C.P & OH @15% on

1609.85
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 185.13
Rs 185.15

Item Code: 18.9.4

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... External
work 32 mm nominal outer dia .Pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8639
(A) 32 mm outer dia CPVC pipe
metre
13.00
120.00
Add 30% for fillings and wastage etc. on (A)
LABOUR
0116
Fitter
Day
0.12
301.00
0114
Beldar
Day
0.25
247.00
Trenching and refilling etc.
0114
Beldar
Day
0.66
247.00
0115
Coolie
Day
0.66
247.00
Total:
Add water charges @ 1% on
1983.91
Add C.P & OH @15% on
2003.75
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 230.43
Rs 230.45

Item Code: 18.9.5

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... External
work 40 mm nominal outer dia .Pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8640
(A) 40mm outer dia CPVC pipe
metre
13.00
170.00
Add 30% for fillings and wastage etc. on (A)
LABOUR
0116
Fitter
Day
0.16
301.00
0114
Beldar
Day
0.33
247.00
Trenching and refilling etc.
0114
Beldar
Day
0.66
247.00
0115
Coolie
Day
0.66
247.00
Total:
Add water charges @ 1% on
2665.71
Add C.P & OH @15% on
2692.37
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 309.62
Rs 309.60

Item Code: 18.9.6

DSR-12

Page 821 of 2298

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... External
work 50 mm nominal outer dia .Pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8641
(A) 50mm outer dia CPVC pipe
metre
13.00
280.00
Add 30% for fillings and wastage etc. on (A)
LABOUR
0116
Fitter
Day
0.16
301.00
0114
Beldar
Day
0.33
247.00
Trenching and refilling etc.
0114
Beldar
Day
0.66
247.00
0115
Coolie
Day
0.66
247.00
Total:
Add water charges @ 1% on
4095.71
Add C.P & OH @15% on
4136.67
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 475.72
Rs 475.70

Item Code: 18.9.7

P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings... External
work 62.50 mm nominal outer dia .Pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8642
(A) Chlorinated polyvinyl- chloride (CPVC) pipe
metre
13.00
835.00
62.5 mm inner dia.
Add 30% for fillings and wastage etc. on (A)
LABOUR
0116
Fitter
Day
0.25
301.00
0114
Beldar
Day
0.66
247.00
Trenching and refilling etc.
0114
Beldar
Day
0.66
247.00
0115
Coolie
Day
0.66
247.00
Total:
Add water charges @ 1% on
11419.31
Add C.P & OH @15% on
11533.50
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1326.35
Rs 1326.35

Item Code: 18.9.8

P/F CPVC pipes, having thermal stability for hot and cold water supply i/c CPVC plain & brass threaded fittings i/c trenching,
refilling: (External wak): 75 mm nominal OD pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8643
(A) Chlorinated polyvinyl- chloride (CPVC) pipe 75 mm inner metre
13.00
1185.00
dia.
(Qty Including 30% for fillings and wastage etc.)
LABOUR
0116
Fitter
Day
0.25
301.00
0114
Beldar
Day
0.66
247.00

DSR-12

Page 822 of 2298

0114
0115

Trenching and refilling etc.

Beldar
Coolie

Day
Day

0.66
0.66

Add water charges @ 1% on

247.00
247.00
Total:
15969.31

Add C.P & OH @15% on

16129.00
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1854.84
Rs 1854.85

Item Code: 18.9.9

P/F CPVC pipes, having thermal stability for hot and cold water supply i/c CPVC plain & brass threaded fittings i/c trenching,
refilling: (External wak): 100 mm nominal OD pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8644
(A) Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm inner metre
13.00
1640.00
dia.
(Qty Including 30% for fillings and wastage etc.)
LABOUR
0116
Fitter
Day
0.37
301.00
0114
Beldar
Day
0.97
247.00
Trenching and refilling etc.
0114
Beldar
Day
0.80
247.00
0115
Coolie
Day
0.80
247.00
Total:
Add water charges @ 1% on
22066.16
Add C.P & OH @15% on
22286.82
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2562.98
Rs 2563.00

Item Code: 18.9.10

P/F CPVC pipes, having thermal stability for hot and cold water supply i/c CPVC plain & brass threaded fittings i/c trenching,
refilling: (External wak): 150 mm nominal OD pipes.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
8645
(A) Chlorinated Polyvinyl-chloride (CPVC) pipe 150 mm inner metre
13.00
2870.00
dia.
(Qty Including 30% for fillings and wastage etc.)
LABOUR
0116
Fitter
Day
0.58
301.00
0114
Beldar
Day
1.54
247.00
Trenching and refilling etc.
0114
Beldar
Day
1.20
247.00
0115
Coolie
Day
1.20
247.00
Total:
Add water charges @ 1% on
38457.76
Add C.P & OH @15% on
38842.34
Cost for 10.00 m
Rate per One Metre:

DSR-12

Rs 4466.87

Page 823 of 2298

Rate as per DSR-12:

Rs 4466.85

Item Code: 18.10.1

P/F G.I. pipes complete with G.I. fittings etc .Internal work - Exposed on wall. 15 mm dia. nominal bore
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS :
1545
15mm dia GI pipes (Medium)
metre
11.50
2271
Carriage of pipes (G.I pipes)
tonne
0.0141
(approx weight of 10m GI pipe =12.30kg
Added 15% for fittings and wastage on above items)
9999

White lead, hemp, oil etc.

9999

Cement, sand and grit etc.

0116
0117
0114

LABOUR :
Fitter grade-I
Assistant Fitter or II class Fitter
Beldar

Rate
81.00
77.87

L.S.

8.06

1.49

L.S.

2.73

1.49

Day
Day
Day

0.33
0.66
0.66

301.00
273.00
247.00
Total:
1391.21

Add water charges @ 1% on

Add C.P & OH @15% on

1405.12
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 161.59
Rs 161.60

Item Code: 18.10.2

P/F G.I. pipes complete with G.I. fittings etc .Internal work - Exposed on wall. 20 mm dia. nominal bore
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS:
1546
20mm dia GI pipes
metre
11.50
2271
Carriage of pipes (G.I pipes)
tonne
0.0183
(approx weight of 10m GI pipe =15.90kg
Added 15% for fittings and wastage on above items)
9999

White lead, hemp, oil etc.

9999

Cement, sand and grit etc.

0116
0117
0114

LABOUR:
Fitter grade-I
Assistant Fitter or II class Fitter
Beldar

Rate
97.00
77.87

L.S.

8.06

1.49

L.S.

2.73

1.49

Day
Day
Day

0.33
0.82
0.66

301.00
273.00
247.00
Total:
1619.22

Add water charges @ 1% on

Add C.P & OH @15% on

1635.41
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 188.07
Rs 188.05

Item Code: 18.10.3

DSR-12

Page 824 of 2298

P/F G.I. pipes complete with G.I. fittings etc .Internal work - Exposed on wall. 25 mm dia. nominal bore
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS :
1547
25mm dia GI pipes
metre
11.50
2271
Carriage of pipes (G.I pipes)
tonne
0.0283
(approx weight of 10m GI pipe =24.60kg
Added 15% for fittings and wastage on above items)
9999

White lead, hemp, oil etc.

9999

Cement, sand and grit etc.

0116
0117
0114

LABOUR:
Fitter grade-I
Assistant Fitter or II class Fitter
Beldar

Rate
134.00
77.87

L.S.

9.49

1.49

L.S.

4.16

1.49

Day
Day
Day

0.33
0.98
0.66

301.00
273.00
247.00
Total:
2093.43

Add water charges @ 1% on

Add C.P & OH @15% on

2114.36
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 243.15
Rs 243.15

Item Code: 18.10.4

P/F G.I. pipes complete with G.I. fittings etc .Internal work - Exposed on wall. 32 mm dia. nominal bore
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS:
1548
32mm dia GI pipes
metre
11.50
2271
Carriage of pipes (G.I pipes)
tonne
0.0365
(approx weight of 10m GI pipe =31.70kg
Added 15% for fittings and wastage on above items)
9999

White lead, hemp, oil etc.

9999

Cement, sand and grit etc.

0116
0117
0114

LABOUR:
Fitter grade-I
Assistant Fitter or II class Fitter
Beldar

Rate
167.00
77.87

L.S.

9.49

1.49

L.S.

4.16

1.49

Day
Day
Day

0.33
0.98
0.98

301.00
273.00
247.00
Total:
2552.61

Add water charges @ 1% on

Add C.P & OH @15% on

2578.14
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 296.49
Rs 296.50

Item Code: 18.10.5

P/F G.I. pipes complete with G.I. fittings etc .Internal work - Exposed on wall. 40 mm dia. nominal bore
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS :

DSR-12

Rate

Page 825 of 2298

1549
2271

40mm dia GI pipes

Carriage of pipes (G.I pipes)
(approx weight of 10m GI pipe =36.50kg
Added 15% for fittings and wastage on above items)

9999

White lead, hemp, oil etc.

9999

Cement, sand and grit etc.

0116
0117
0114

LABOUR :
Fitter grade-I
Assistant Fitter or II class Fitter
Beldar

metre
tonne

11.50
0.042

202.00
77.87

L.S.

13.52

1.49

L.S.

5.33

1.49

Day
Day
Day

0.33
1.31
1.31

301.00
273.00
247.00
Total:
3134.88

Add water charges @ 1% on

Add C.P & OH @15% on

3166.23
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 364.12
Rs 364.10

Item Code: 18.10.6

P/F G.I. pipes complete with G.I. fittings etc .Internal work - Exposed on wall. 50 mm dia. nominal bore
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS :
1550
GI pipes- 50mm dia
metre
11.50
2271
Carriage of pipes (G.I pipes)
tonne
0.0595
(approx weight of 10m GI pipe =51.70kg
Added 15% for fittings and wastage on above items)
9999

White lead, hemp, oil etc.

9999

Cement, sand and grit etc.

0116
0117
0114

LABOUR:
Fitter grade-I
Assistant Fitter or II class Fitter
Beldar

Rate
254.00
77.87

L.S.

13.52

1.49

L.S.

5.33

1.49

Day
Day
Day

0.33
1.64
1.64

301.00
273.00
247.00
Total:
3905.84

Add water charges @ 1% on

Add C.P & OH @15% on

3944.90
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 453.66
Rs 453.65

Item Code: 18.11.1

Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia nominal
bore
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
1545
(A) 15 mm dia G.I. Pipe
metre
11.50
81.00
2271
(B) Carriage of pipe approx weight of 10m = 12.30 kg
tonne
0.0141
77.87
Added 15% for fittings and wastage inf (A & B)

DSR-12

Page 826 of 2298

9999

18.040.01

18.078

0116
0117
0114

White lead, hemp, oil etc.

Painting G.I. pipe with anti-corrosive bitumastic paint two or
more coats
Painting G.I. pipes with two coats of anti-corrosive bitumastic
paint - : 15 mm diameter p
Making chases upto 7.5x7.5cm in walls and making good the
same
Making chases up to 7.5x7.5 cm in walls i.. after housing G.I.
pipe etc.
LABOUR :Fitter
Asstt. fitter
Beldar

L.S.

Day
Day
Day

8.06

1.49

10.00

4.39

10.00

64.49

0.33
0.66
0.66

301.00
273.00
247.00
Total:
1387.14

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

1401.01
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 230.00
Rs 229.10

Item Code: 18.11.2

Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 20 mm dia nominal
bore
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
1546
(A) 20 mm dia G.I. Pipe
metre
11.50
97.00
2271
(B) Carriage of pipe approx weight of 10m = 12.30 kg
tonne
0.0141
77.87
Added 15% for fittings and wastage inf (A & B)
9999
White lead, hemp, oil etc.
L.S.
8.06
1.49
Painting G.I. pipe with anti-corrosive bitumastic paint two or
more coats
18.040.02 Painting G.I. pipes with two coats of anti-corrosive bitumastic m
10.00
5.16
paint - : 20mm diameter pi
Making chases upto 7.5x7.5cm in walls and making good the
same
18.078
Making chases up to 7.5x7.5 cm in walls i.. after housing G.I.
10.00
64.49
pipe etc.
LABOUR :0116
Fitter
Day
0.33
301.00
0117
Asstt. fitter
Day
0.66
273.00
0114
Beldar
Day
0.66
247.00
Total:
Add water charges @ 1% except on [A]+[B] i.e on
1571.14
Add C.P & OH @15% except on [A]+[B] i.e on
1586.85
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 252.14
Rs 251.30

Item Code: 18.12.1

P/F G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia. nominal bore

Code

DSR-12

Description

Details of Cost for : 10.00 m

Unit
Quantity

Rate

Page 827 of 2298

1545
2271

MATERIALS :
15mm dia GI pipes (Medium)
metre
Carriage of pipes (G.I pipes)
tonne
(approx weight of 10m pipe = 12.30 kg
Added 20% for fittings and wastage on material and carriage)

10.20
0.0125

81.00
77.87

9999

White lead, hemp, oil etc.

L.S.

5.33

1.49

0116
0114

LABOUR:
Fitter grade-I
Beldar
Trenching and refilling etc.

Day
Day

0.08
0.16

301.00
247.00

0114
0115

Beldar
Coolie

Day
Day

0.66
0.66

247.00
247.00
Total:
1224.75

Add water charges @ 1% on

Add C.P & OH @15% on

1237.00
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 142.26
Rs 142.25

Item Code: 18.12.2

P/F G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia. nominal bore

Code
1546
2271

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :
20mm dia GI pipes
Carriage of pipes (G.I pipes)
(approx weight of 10m pipe = 15.90 kg
Added 2% for fittings and wastage on material and carriage)

metre
tonne

Rate

10.20
0.0162

97.00
77.87

9999

White lead, hemp, oil etc.

L.S.

5.33

1.49

0116
0114

LABOUR :
Fitter grade-I
Beldar
Trenching and refilling etc.

Day
Day

0.08
0.16

301.00
247.00

0114
0115

Beldar
Coolie

Day
Day

0.66
0.66

247.00
247.00
Total:
1388.24

Add water charges @ 1% on

Add C.P & OH @15% on

1402.12
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 161.24
Rs 161.25

Item Code: 18.12.3

P/F G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia. nominal bore

DSR-12

Page 828 of 2298

Code
1547
2271

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :
25mm dia GI pipes
Carriage of pipes (G.I pipes)
(approx weight of 10m pipe = 24.60 kg
Added 2% for fittings and wastage on material and carriage)

metre
tonne

Rate

10.20
0.0251

134.00
77.87

9999

White lead, hemp, oil etc.

L.S.

6.76

1.49

0116
0114

LABOUR :
Fitter grade-I
Beldar
Trenching and refilling etc.

Day
Day

0.12
0.25

301.00
247.00

0114
0115

Beldar
Coolie

Day
Day

0.66
0.66

247.00
247.00
Total:
1802.73

Add water charges @ 1% on

Add C.P & OH @15% on

1820.76
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 209.39
Rs 209.40

Item Code: 18.12.4

P/F G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 32 mm dia. nominal bore

Code
1548
2271

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :
32mm dia GI pipes
Carriage of pipes (G.I pipes)
(approx weight of 10m pipe = 31.70 kg
Added 2% for fittings and wastage on material and carriage)

metre
tonne

Rate

10.20
0.0323

167.00
77.87

9999

White lead, hemp, oil etc.

L.S.

6.76

1.49

0116
0114

LABOUR:
Fitter grade-I
Beldar
Trenching and refilling etc.

Day
Day

0.12
0.25

301.00
247.00

0114
0115

Beldar
Coolie

Day
Day

0.66
0.66

247.00
247.00
Total:
2139.90

Add water charges @ 1% on

Add C.P & OH @15% on

2161.30
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 248.55
Rs 248.55

Item Code: 18.12.5

DSR-12

Page 829 of 2298

P/F G.I. pipes with G.I. fittings including trenching and refilling etc. External work 40 mm dia. nominal bore

Code
1549
2271

9999

0116
0114

0114
0115

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :
40mm dia GI pipes
Carriage of pipes (G.I pipes)
approx weight of 100m pipe = 365 kg
(Added 2% for fittings and wastage for above items)
White lead, hemp, oil etc.
LABOUR :
LABOUR:
Fitter grade-I
Beldar
Trenching and refilling

metre
tonne

Beldar
Coolie

Rate

10.20
0.03723

202.00
77.87

L.S.

9.49

1.49

Day
Day

0.16
0.33

301.00
247.00

Day
Day

0.66
0.66

247.00
247.00
Total:
2533.15

Add water charges @ 1% on

Add C.P & OH @15% on

2558.48
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 294.23
Rs 294.20

Item Code: 18.12.6

P/F G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50mm dia. nominal bore

Code
1550
2271

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :
GI pipes- 50mm dia
Carriage of pipes (G.I pipes)
(approx weight of 10m pipe = 51.70 kg
Added 2% for fittings and wastage on material and carriage)

metre
tonne

Rate

10.20
0.0527

254.00
77.87

9999

White lead, hemp, oil etc.

L.S.

9.49

1.49

0116
0114

LABOUR:
Fitter grade-I
Beldar
Trenching and refilling etc.

Day
Day

0.16
0.33

301.00
247.00

0114
0115

Beldar
Coolie

Day
Day

0.66
0.66

247.00
247.00
Total:
3064.75

Add water charges @ 1% on

Add C.P & OH @15% on

3095.40
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 355.97
Rs 355.95

Item Code: 18.12.7

DSR-12

Page 830 of 2298

P/F G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 65mm dia. nominal bore

Code
1551
2271

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS:
G.I. pipes 65 mm dia
Carriage of pipes (G.I pipes)
(approx weight of 10m pipe = 66.30 kg
Added 2% for fittings and wastage on material and carriage)

metre
tonne

Rate

10.20
0.0676

325.00
77.87

9999

White lead, hemp, oil etc.

L.S.

13.52

1.49

0116
0114

LABOUR:
Fitter grade-I
Beldar
Trenching and refilling etc.

Day
Day

0.25
0.66

301.00
247.00

0114
0115

Beldar
Coolie

Day
Day

0.66
0.66

247.00
247.00
Total:
3904.71

Add water charges @ 1% on

Add C.P & OH @15% on

3943.76
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 453.53
Rs 453.55

Item Code: 18.12.8

P/F G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80mm dia. nominal bore

Code
1552
2271

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS:
G.I. pipes 80mm dia
Carriage of pipes (G.I pipes)
(approx weight of 10m pipe = 86.40 kg
Added 2% for fittings and wastage on material and carriage)

metre
tonne

Rate

10.20
0.0881

426.00
77.87

9999

White lead, hemp, oil etc.

L.S.

13.52

1.49

0116
0114

LABOUR:
Fitter grade-I
Beldar
Trenching and refilling etc.

Day
Day

0.25
0.66

301.00
247.00

0114
0115

Beldar
Coolie

Day
Day

0.66
0.66

247.00
247.00
Total:
4936.51

Add water charges @ 1% on

Add C.P & OH @15% on

4985.88
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 573.38
Rs 573.40

Page 831 of 2298

Item Code: 18.13.1

Making connection of G.I. distribution branch complete : 25 to 40 mm nominal bore
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1608
G.I. tees (equal) 25 mm
each
1.00
1555
G.I. back (jam) nuts 25 mm dia
each
1.00
9999
Carriage of materials and sundries
L.S.
5.33
LABOUR:
0116
Fitter grade-I
Day
0.33
0114
Beldar
Day
0.33
Add water charges @ 1% on

Rate
42.00
8.00
1.49
301.00
247.00
Total:
238.78

Add C.P & OH @15% on

241.17
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 277.35
Rs 277.35

Item Code: 18.13.2

Making connection of G.I. distribution branch complete : 50 to 80 mm nominal bore
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1612
G.I. tees (equal) 65 mm
each
1.00
1559
G.I. back (jam) nuts 65 mm dia
each
1.00
9999
Carriage of materials and sundries
L.S.
5.33
LABOUR :
0116
Fitter grade-I
Day
0.45
0114
Beldar
Day
0.45
Add water charges @ 1% on

Rate
270.00
18.00
1.49
301.00
247.00
Total:
542.54

Add C.P & OH @15% on

547.97
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 630.17
Rs 630.15

Item Code: 18.14

Fixing water meter and stop cock in G.I. pipe line......complete (cost of water meter and stop cock to be paid separately).

Code

Description

1555
9999

MATERIALS:
G.I. back (jam) nuts 25 mm dia
Carriage of materials and sundries

0116
0114

LABOUR:
Fitter grade-I
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

1.00

8.00

L.S.

5.33

1.49

Day
Day

0.33
0.33

301.00
247.00
Total:
196.78

Add water charges @ 1% on

DSR-12

Page 832 of 2298

Add C.P & OH @15% on

198.75
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 228.56
Rs 228.55

Item Code: 18.15.1

P/F bib cock of approved quality : 15 mm nominal bore
Code
1339
9999

Description
MATERIALS :15mm dia. brass bib cock.
Carriage of materials and fixing charge

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
8.06

Add water charges @ 1% on

Rate
165.00
1.49
Total:
177.01

Add C.P & OH @15% on

178.78
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 205.60
Rs 205.60

Item Code: 18.15.2

Pr/F brass bib cock of approved quality : 20mm nominal bore
Code

Description

1340

MATERIALS:
20mm dia. brass bih cock.

9999

Carriage of materials and fixing charge

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

1.00

215.00

L.S.

9.49

1.49
Total:
229.14

Add water charges @ 1% on

Add C.P & OH @15% on

231.43
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 266.14
Rs 266.15

Item Code: 18.16.1

P/F brass stop cock of approved quality : 15 mm nominal bore
Code
1342
9999

Description
Brass Stopcock 15mm dia
Carriage of materials and fixing charge

Details of Cost for : 1.00 No.

Unit
Quantity
each
1.00
L.S.
8.06
Add water charges @ 1% on

Rate
165.00
1.49
Total:
177.01

Add C.P & OH @15% on

178.78
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 205.60
Rs 205.60

Item Code: 18.16.2

DSR-12

Page 833 of 2298

P/F brass stop cock of approved quality : 20 mm nominal bore

Code
1343
9999

Description
MATERIALS:
Brass stopcock 20 mm dia
Carriage of materials and fixing charge

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
9.79

Add water charges @ 1% on

Rate
215.00
1.49
Total:
229.59

Add C.P & OH @15% on

231.89
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 266.67
Rs 266.65

Item Code: 18.17.1

P/F gun metal gate valve with C.I. wheel (screwed end) : 25 mm nominal bore
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
1927
Brass gate valve with wheel - 25mm dia
each
1.00
9999
Carriage of materials and fixing charges
L.S.
10.79
Add water charges @ 1% on

Rate
305.00
1.49
Total:
321.08

Add C.P & OH @15% on

324.29
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 372.93
Rs 372.95

Item Code: 18.17.2

P/F gun metal gate valve with C.I. wheel (screwed end) : 32 mm nominal bore
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
1928
Brass gate valve with wheel - 32mm dia
each
1.00
9999
Carriage of materials and fixing charges
L.S.
12.22
Add water charges @ 1% on

Rate
370.00
1.49
Total:
388.21

Add C.P & OH @15% on

392.09
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 450.90
Rs 450.90

Item Code: 18.17.3

P/F gun metal gate valve with C.I. wheel (screwed end) : 40 mm nominal bore
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
1929
Brass gate valve with wheel - 40mm dia
each
1.00
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate
450.00
1.49
Total:
470.14

Add C.P & OH @15% on

474.84
Cost for 1.00 No.

DSR-12

Page 834 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 546.07
Rs 546.05

Item Code: 18.17.4

P/F gun metal gate valve with C.I. wheel (screwed end) : 50 mm nominal bore
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
1930
Brass gate valve with wheel - 50mm dia
each
1.00
9999
Carriage of materials and fixing charges
L.S.
14.82
Add water charges @ 1% on

Rate
650.00
1.49
Total:
672.08

Add C.P & OH @15% on

678.80
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 780.62
Rs 780.60

Item Code: 18.17.5

P/F brass gate valve : 65 mm nominal bore.
Code
1931
9999

Description
MATERIALS :65mm dia Gun metal gate valve with wheel
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
16.12

Add water charges @ 1% on

Rate
900.00
1.49
Total:
924.02

Add C.P & OH @15% on

933.26
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1073.25
Rs 1073.25

Item Code: 18.17.6

P/F brass gate valve : 80 mm nominal bore.
Code
1932
9999

Description
MATERIALS :50mm dia Gun metal gate valve with wheel
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
18.85

Add water charges @ 1% on

Rate
1550.00
1.49
Total:
1578.09

Add C.P & OH @15% on

1593.87
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1832.95
Rs 1832.95

Item Code: 18.18.1

P/F ball valve (brass) - High or low pressure, with plastic floats complete : 15 mm nominal bore
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
1922
H.P. or L.P. ball valve with polythene floats: 15mm dia.
each
1.00
9999
Carriage of materials and fixing charges
L.S.
21.58

DSR-12

Rate
190.00
1.49

Page 835 of 2298

Add water charges @ 1% on

Total:
222.15

Add C.P & OH @15% on

224.37
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 258.03
Rs 258.05

Item Code: 18.18.2

P/F ball valve (brass) - High or low pressure, with plastic floats complete : 20 mm nominal bore
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
1923
Brass ball valve - 20mm
each
1.00
9999
Carriage of materials and fixing charges
L.S.
26.91
Add water charges @ 1% on

Rate
270.00
1.49
Total:
310.10

Add C.P & OH @15% on

313.20
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 360.18
Rs 360.20

Item Code: 18.18.3

P/F ball valve (brass) - High or low pressure, with plastic floats complete : 25 mm nominal bore
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
1924
Brass ball valve - 25mm
each
1.00
9999
Carriage of materials and fixing charges
L.S.
32.24
Add water charges @ 1% on

Rate
315.00
1.49
Total:
363.04

Add C.P & OH @15% on

366.67
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 421.67
Rs 421.65

Item Code: 18.19.1.1

P/F gun metal non- return valve of (screwed end) : 25 mmnominal bore Horizontal
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1933
Gunmetal non-return valve-horizontal (screwed end) 25 mm
dia
each
1.00
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate

310.00
1.49
Total:
330.14

Add C.P & OH @15% on

333.44
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 383.46
Rs 383.45

Page 836 of 2298

Item Code: 18.19.1.2

P/F gun metal non- return valve of (screwed end) : 25 mmnominal bore Vertical
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS :3080
25mm non return valve
each
1.00
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate
320.00
1.49
Total:
340.14

Add C.P & OH @15% on

343.54
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 395.07
Rs 395.05

Item Code: 18.19.2.1

P/F gun metal non- return valve of (screwed end) : 32 mmnominal bore Horizontal
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1934
Gunmetal non-return valve-horizontal (screwed end) 32 mm
dia
each
1.00
9999
Carriage of materials and fixing charges
L.S.
14.82
Add water charges @ 1% on

Rate

400.00
1.49
Total:
422.08

Add C.P & OH @15% on

426.30
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 490.25
Rs 490.25

Item Code: 18.19.2.2

P/F gun metal non- return valve of (screwed end) : 32 mmnominal bore Vertical
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
3084
Gunmetal non-return valve-vertical (screwed end) 32 mm dia

9999

Rate

each

1.00

490.00

L.S.

14.82

1.49
Total:
512.08

Carriage of materials and fixing charges

Add water charges @ 1% on

Add C.P & OH @15% on

517.20
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 594.78
Rs 594.80

Item Code: 18.19.3.1

DSR-12

Page 837 of 2298

P/F gun metal non- return valve of (screwed end) : 40 mmnominal bore Horizontal
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1935
Gunmetal non-return valve-horizontal (screwed end) 40 mm
dia
each
1.00
9999
Carriage of materials and fixing charges
L.S.
16.12
Add water charges @ 1% on

Rate

510.00
1.49
Total:
534.02

Add C.P & OH @15% on

539.36
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 620.26
Rs 620.25

Item Code: 18.19.3.2

P/F gun metal non- return valve of (screwed end) : 40 mm nominal bore Vertical
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
3088
Gunmetal non-return valve-vertical (screwed end) 40 mm dia

9999

Rate

each

1.00

680.00

L.S.

16.12

1.49
Total:
704.02

Carriage of materials and fixing charges

Add water charges @ 1% on

Add C.P & OH @15% on

711.06
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 817.72
Rs 817.70

Item Code: 18.19.4.1

P/F gun metal non- return valve of (screwed end) : 50 mmnominal bore Horizontal
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1936
Gunmetal non-return valve-horizontal (screwed end) 50 mm
dia
each
1.00
9999
Carriage of materials and fixing charges
L.S.
17.55
Add water charges @ 1% on

Rate

780.00
1.49
Total:
806.15

Add C.P & OH @15% on

814.21
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 936.34
Rs 936.35

Item Code: 18.19.4.2

DSR-12

Page 838 of 2298

P/F gun metal non- return valve of (screwed end) : 40 mmnominal bore Vertical
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
3092
Gunmetal non-return valve-vertical (screwed end) 50 mm dia

9999

Rate

each

1.00

930.00

L.S.

17.55

1.49
Total:
956.15

Carriage of materials and fixing charges

Add water charges @ 1% on

Add C.P & OH @15% on

965.71
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1110.57
Rs 1110.55

Item Code: 18.19.5.1

P/F gun metal non-return valve (screwed end) 65 mm nominal bore : Horizontal.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS :1937
65mm non return valve
each
1.00
9999
Carriage of materials and fixing charges
L.S.
18.85
Add water charges @ 1% on

Rate
1420.00
1.49
Total:
1448.09

Add C.P & OH @15% on

1462.57
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1681.96
Rs 1681.95

Item Code: 18.19.5.2

P/F gun metal non-return valve (screwed end) 65 mm nominal bore : Vertical.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS :3096
65mm non return valve
each
1.00
9999
Carriage of materials and fixing charges
L.S.
18.85
Add water charges @ 1% on

Rate
1650.00
1.49
Total:
1678.09

Add C.P & OH @15% on

1694.87
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1949.10
Rs 1949.10

Item Code: 18.19.6.1

P/F gun metal non-return valve (screwed end) 80 mm nominal bore : Horizontal.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS :1938
80mm non return valve
each
1.00
9999
Carriage of materials and fixing charges
L.S.
20.28

DSR-12

Rate
2030.00
1.49

Page 839 of 2298

Add water charges @ 1% on

Total:
2060.22

Add C.P & OH @15% on

2080.82
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2392.94
Rs 2392.95

Item Code: 18.19.6.2

P/F gun metal non-return valve (screwed end) 80 mm nominal bore : Vertical.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS :3300
80mm non return valve
each
1.00
9999
Carriage of materials and fixing charges
L.S.
20.28
Add water charges @ 1% on

Rate
2630.00
1.49
Total:
2660.22

Add C.P & OH @15% on

2686.82
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 3089.84
Rs 3089.85

Item Code: 18.20.1

P/F brass ferrule :- 15 mm nominal bore.
Code
1360
9999

Description
MATERIALS :15mrn diameter brass-ferrule
Carriage of material and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
40.30

Add water charges @ 1% on

Rate
115.00
1.49
Total:
175.05

Add C.P & OH @15% on

176.80
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 203.32
Rs 203.30

Item Code: 18.20.2

P/F brass ferrule :- 20 mm nominal bore.
Code
1361
9999

Description
MATERIALS :20mm diameter brass-ferrule,
Carriage of material and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
47.19

Add water charges @ 1% on

Rate
145.00
1.49
Total:
215.31

Add C.P & OH @15% on

217.46
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 250.08
Rs 250.10

Page 840 of 2298

Item Code: 18.20.3

P/F brass ferrule :- 25 mm nominal bore.
Code
1362
9999

Description
MATERIALS :25mm diameter brass-ferrule,
Carriage of material and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
53.82

Add water charges @ 1% on

Rate
205.00
1.49
Total:
285.19

Add C.P & OH @15% on

288.04
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 331.25
Rs 331.25

Item Code: 18.21.1.1

P/F uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1687
Unplasticised P.V.C.connection pipe with brass union 30 cm
long: 15 mm bore
each
1.00
9999
Carriage of materials and fixing charges
L.S.
12.22
Add water charges @ 1% on

Rate

26.00
1.49
Total:
44.21

Add C.P & OH @15% on

44.65
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 51.35
Rs 51.35

Item Code: 18.21.1.2

P/F uplasticised PVC connection pipe with brass unions : 30 cm length 20 mm nominal bore
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1688
Unplasticised P.V.C.connection pipe with brass union 30 cm
long: 20 mm bore
each
1.00
9999
Carriage of materials and fixing charges
L.S.
12.22
Add water charges @ 1% on

Rate

33.00
1.49
Total:
51.21

Add C.P & OH @15% on

51.72
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 59.48
Rs 59.50

Item Code: 18.21.2.1

P/F uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore _x000D_

DSR-12

Page 841 of 2298

Code
1689
9999

Details of Cost for : 1.00 No.

Unit
Quantity

Description

MATERIALS:
Unplasticised P.V.C. connection pipe with brass union 45 cm each
long 15 mm bore
Carriage of materials and fixing charges
L.S.

Rate

1.00

33.00

13.52

1.49
Total:
53.14

Add water charges @ 1% on

Add C.P & OH @15% on

53.67
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 61.72
Rs 61.70

Item Code: 18.21.2.2

P/F uplasticised PVC connection pipe with brass unions : 45 cm length 20 mm nominal bore
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
1690
Unplasticised P.V.C.connection pipe with brass union 45 cm
long: 20 mm bore
each
1.00
9999
Carriage of materials and fixing charges
L.S.
13.52
Add water charges @ 1% on

Rate

43.00
1.49
Total:
63.14

Add C.P & OH @15% on

63.77
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 73.34
Rs 73.35

Item Code: 18.22.1

P/F C.P. brass shower rose with 15 or 20 mm inlet : _x000D_
Code
1878
9999

Details of Cost for : 1.00 No.

Unit
Quantity
each
1.00

Description
100mm dia CP brass shower rose
Carriage of materials and fixing charges

L.S.

6.76

Add water charges @ 1% on

Rate
40.00
1.49
Total:
50.07

Add C.P & OH @15% on

50.57
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 58.16
Rs 58.15

Item Code: 18.22.2

P/F C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter
Code
1879

Description

Details of Cost for : 1.00 No.

Unit
Quantity

each

DSR-12

Rate

MATERIALS:
Shower rose C.P.brass for 15 to 20 mm inlet:150 mm dia
1.00

55.00

Page 842 of 2298

9999

Carriage of materials and fixing charges

L.S.

8.06

Add water charges @ 1% on

1.49
Total:
67.01

Add C.P & OH @15% on

67.68
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 77.83
Rs 77.85

Item Code: 18.23

Laying centrifugally cast (spun) iron S & S or flanged pipes.
Code

0116
0117
0114
9999

Description
10 m of 200 mm dia C.I. pipe class A
Weight = (2x257) = 514kg = 5.14 quintal
Labour for laying pipe
Fitter
Asstt. Fitter
Beldar
Sundries

Details of Cost for : 5.14 Qtl

Unit
Quantity

Day
Day
Day
L.S.

0.17
0.17
1.33
16.12

Add water charges @ 1% on

Rate

301.00
273.00
247.00
1.49
Total:
450.11

Add C.P & OH @15% on

454.61
Cost for 5.14 Qtl
Rate per One Qtl:
Rate as per DSR-12:

Rs 101.71
Rs 101.70

Item Code: 18.24

Laying S & S or flanged C.I. special such as tees, bends, collars, tapers and caps etc.
Details of Cost for : 7.00 Qtl
Code
Description
Unit
Quantity
10 Nos. Tee 200x150mm Weight = 70x10 = 700kg.
Labour for laying tee0116
Fitter
Day
0.93
0117
Asst. Fitter
Day
0.62
0114
Beldar
Day
2.48
9999
Sundries
L.S.
40.17
Add water charges @ 1% on

Rate

301.00
273.00
247.00
1.49
Total:
1121.60

Add C.P & OH @15% on

1132.82
Cost for 7.00 Qtl
Rate per One Qtl:
Rate as per DSR-12:

Rs 186.11
Rs 186.10

Item Code: 18.25.1

P/L S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class) :- Upto 300 mm dia.

Code
1464

DSR-12

Description
MATERIALS :Cost of specials

Details of Cost for : 1.00 Qtl

Unit
Quantity
quint

1.00

Rate
3450.00

Page 843 of 2298

2309
18.024

Carriage of material
tonne
LABOUR
Laying S & S or flanged C.I. special such as tees, bends, collars,
tapers and caps etc.

0.10

77.67

1.00

186.11

Add water charges @ 1% except on [A] i.e on

Total:
3457.77

Add C.P & OH @15% except on [A] i.e on

3492.35
Cost for 1.00 Qtl
Rate per One Qtl:
Rate as per DSR-12:

Rs 4202.31
Rs 4202.35

Item Code: 18.25.2

P/L S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class) :- Over 300 mm dia.

Code
1466
2309
18.024

Description

Details of Cost for : 1.00 Qtl

Unit
Quantity

MATERIALS :Cost of specials

quint
Carriage of materials
tonne
LABOUR
Laying S & S or flanged C.I. special such as tees, bends, collars,
tapers and caps etc.

Rate

1.00
0.10

3550.00
77.67

1.00

186.11

Add water charges @ 1% except on [A] i.e on

Total:
3557.77

Add C.P & OH @15% except on [A] i.e on

3593.35
Cost for 1.00 Qtl
Rate per One Qtl:
Rate as per DSR-12:

Rs 4318.46
Rs 4318.50

Item Code: 18.26.1

P/L flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc.: Upto 300 mm dia.
Details of Cost for : 1.00 Qtl
Code
Description
Unit
Quantity
MATERIALS :1468
Cost of specials
quint
1.00
2309
Carriage of materials
tonne
0.10
LABOUR
18.024
Laying S & S or flanged C.I. special such as tees, bends, collars,
1.00
tapers and caps etc.
Add water charges @ 1% except on [A] i.e on

Rate
5300.00
77.67
186.11
Total:
5307.77

Add C.P & OH @15% except on [A] i.e on

5360.85
Cost for 1.00 Qtl
Rate per One Qtl:
Rate as per DSR-12:

Rs 6351.09
Rs 6351.10

Item Code: 18.26.2

P/L flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc.: Over 300 mm dia.
Details of Cost for : 1.00 Qtl
Code
Description
Unit
Quantity
MATERIALS :-

DSR-12

Rate

Page 844 of 2298

1470
2309
18.024

Cost of specials
quint
Carriage of materials
tonne
LABOUR
Laying S & S or flanged C.I. special such as tees, bends, collars,
tapers and caps etc.

1.00
0.10

5600.00
77.67

1.00

186.11

Add water charges @ 1% except on [A] i.e on

Total:
5607.77

Add C.P & OH @15% except on [A] i.e on

5663.85
Cost for 1.00 Qtl
Rate per One Qtl:
Rate as per DSR-12:

Rs 6699.54
Rs 6699.55

Item Code: 18.27.1

P/L S & S centrifugally cast (spun) iron pipes (Class LA): 100 mm dia. pipe.
Code

7697
2319
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description

MATERIALS :100mm dia. spun iron pipes (in 5.5 m lengths) weightof 1m
pipe = 19.820 kg
Weight of 10m pipes 19.820x10= 198.20 Kg
Cost of pipe
Metre
Carriage of pipes
100 m
Labour for lay ing
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00
10.00

830.00
191.48

1.98

101.71

Add water charges @ 1% except on [A] i.e on

Total:
8319.15

Add C.P & OH @15% except on [A] i.e on

8402.34
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 986.41
Rs 986.40

Item Code: 18.27.2

P/L S & S centrifugally cast (spun) iron pipes (Class LA): 125 mm dia. pipe.
Code

7698
2320
18.023

Description

Details of Cost for : 10.00 m

Unit
Quantity

MATERIALS :125mm dia. spun iron pipes (in 5.5 m lengths) weightof 1m
pipe = 25.82 kg
Weight of 10m pipes 25.820x10 = 258.20 Kg
Cost of pipe
metre
Carriage of pipes
100 m
Labour for laying
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00
10.00

1040.00
256.77

2.58

101.71

Add water charges @ 1% except on [A] i.e on

Total:
10425.68

Add C.P & OH @15% except on [A] i.e on

10529.94
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 1237.18
Rs 1237.15

Page 845 of 2298

Item Code: 18.27.3

P/L S & S centrifugally cast (spun) iron pipes (Class LA): 150 mm dia. pipe.
Code

7699
2321
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description

MATERIALS :150mm dia. spun iron pipes (in 5.5 m lengths) weight of 1m
pipe = 32.18 kg
Weight of 10m pipes 32.18x10 = 321.80 Kg
Cost of pipe
metre
Carriage of pipes
100 m
Labour for laying
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00
10.00

1240.00
319.12

3.22

101.71

Add water charges @ 1% except on [A] i.e on

Total:
12431.91

Add C.P & OH @15% except on [A] i.e on

12556.23
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1476.72
Rs 1476.70

Item Code: 18.27.4

P/L S & S centrifugally cast (spun) iron pipes (Class LA): 200 mm dia. pipe.
Code

7700
2322
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description

MATERIALS :200mm dia. spun iron pipes (in 5.5 m lengths) weight of 1m
pipe = 47.090 kg
Weight of 10m pipes 47.090x10 = 470.90 Kg
Cost of pipe
Metre
Carriage of pipes
100 m
Labour for laying
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00
10.00

2120.00
519.11

4.71

101.71

Add water charges @ 1% except on [A] i.e on

Total:
21251.91

Add C.P & OH @15% except on [A] i.e on

21464.43
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2516.31
Rs 2516.30

Item Code: 18.27.5

P/L S & S centrifugally cast (spun) iron pipes (Class LA): 250 mm dia. pipe.
Code

7701
2323
18.023

DSR-12

Description

Details of Cost for : 10.00 m

Unit
Quantity

MATERIALS :250mm dia. spun iron pipes (in 5.5 m lengths) weightof 1m
pipe = 63.450 kg
Weight of 10m pipes 63.450x10 = 634.50 Kg
Cost of pipe
Metre
Carriage of pipes
100 m
Labour for laying
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00
10.00

2830.00
737.68

6.35

101.71

Page 846 of 2298

Add water charges @ 1% except on [A] i.e on

Total:
28373.77

Add C.P & OH @15% except on [A] i.e on

28657.51
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 3360.20
Rs 3360.20

Item Code: 18.27.6

P/L S & S centrifugally cast (spun) iron pipes (Class LA): 300 mm dia. pipe.
Code

7702
2324
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description

MATERIALS:300mm dia. spun iron pipes (in 5.5 m lengths) weight of 1m

pipe = 81.820 kg
Weight of 10m pipes 81.820x10 = 818.20 Kg
Cost of pipe
Metre
Carriage of pipes
100 m
Labour for laying
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00
10.00

3740.00
911.78

8.18

101.71

Add water charges @ 1% except on [A] i.e on

Total:
37491.18

Add C.P & OH @15% except on [A] i.e on

37866.09
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 4437.80
Rs 4437.80

Item Code: 18.27.7

P/L S & S centrifugally cast (spun) iron pipes (Class LA): 350 mm dia. pipe.
Code

7703
2325
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description

MATERIALS :350mm dia. spun iron pipes (in 5.5 m lengths) weight of 1m
pipe = 103.10 kg
Weight of 10m pipes 103.10x10 =1031.00 kg
Cost of pipe
metre
Carriage of pipes
100 m
Labour for laying
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00
10.00

4500.00
1276.50

10.31

101.71

Add water charges @ 1% except on [A] i.e on

Total:
45127.65

Add C.P & OH @15% except on [A] i.e on

45578.93
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 5346.44
Rs 5346.45

Item Code: 18.27.8

P/L S & S centrifugally cast (spun) iron pipes (Class LA): 400 mm dia. pipe.
Code

DSR-12

Description

Details of Cost for : 10.00 m

Unit
Quantity

Rate

Page 847 of 2298

7704
2326
18.023

MATERIALS :400mm dia. spun iron pipes (in 5.5 m lengths) weight of 1m
pipe = 125.40 kg
Weight of 10m pipes 125.450x10 = 1254.50 Kg
Cost of pipe
Metre
Carriage of pipes
100 m
Labour for laying
Laying centrifugally cast (spun) iron S & S or flanged pipes.

10.00
10.00

5870.00
1740.68

12.55

101.71

Add water charges @ 1% except on [A] i.e on

Total:
58874.07

Add C.P & OH @15% except on [A] i.e on

59462.81
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 6965.87
Rs 6965.85

Item Code: 18.27.9

P/L S & S centrifugally cast (spun) iron pipes (Class LA): 450 mm dia. pipe.
Code

7705
2327
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description

MATERIALS :450mm dia. spun iron pipes (in 5.5 m lengths) weight of 1m
pipe = 151.27 kg
Weight of 10m pipes 151.270x 10 = 1512.70 Kg
Cost of pipe
Metre
Carriage of pipes
100 m
Labour for laying
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00
10.00

7100.00
2127.50

15.13

101.71

Add water charges @ 1% except on [A] i.e on

Total:
71212.75

Add C.P & OH @15% except on [A] i.e on

71924.88
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 8425.25
Rs 8425.25

Item Code: 18.27.10

P/L S & S centrifugally cast (spun) iron pipes (Class LA): 500 mm dia. pipe.
Code

7706
2328
18.023

Description

Details of Cost for : 10.00 m

Unit
Quantity

MATERIALS :500mm dia. spun iron pipes (in 5.5 m lengths) weight of 1m
pipe = 177.09 kg
Weight of 10m pipes 177.090x10 = 1770.90 Kg
Cost of pipe
Metre
Carriage of pipes
100 m
Labour for laying
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00
10.00

8250.00
2127.50

17.71

101.71

Add water charges @ 1% except on [A] i.e on

Total:
82712.75

Add C.P & OH @15% except on [A] i.e on

83539.88
Cost for 10.00 m

DSR-12

Page 848 of 2298

Rate per One Metre:

Rate as per DSR-12:

Rs 9787.21
Rs 9787.20

Item Code: 18.27.11

P/L S & S centrifugally cast (spun) iron pipes (Class LA): 600 mm dia. pipe.
Code

7707
2329
18.023

Description

Details of Cost for : 10.00 m

Unit
Quantity

MATERIALS :600mm dia. spun iron pipes (in 5.5 m lengths) weight of 1m
pipe = 236.00 kg
Weight of 10m pipes 236.000x10 = 2360.00 Kg
Cost of pipe
Metre
Carriage of pipes
100 m
Labour for laying
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Rate

10.00
10.00

11450.00
3191.25

23.60

101.71

Add water charges @ 1% except on [A] i.e on

Total:
114819.13

Add C.P & OH @15% except on [A] i.e on

115967.32
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 13576.28
Rs 13576.25

Item Code: 18.28.1

Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 100 mm diameter pipe.

Code

1881
0761
0771
9999
9999
0116
0117
0114

Description
Details of cost for 10 joints
MATERIALS :Spun yarn 0.17x 10 =1.70 kg.
Fuel wood
Kerosene oil
Sundries
Carriage of materials
LABOURFitter
Asstt. Fitter
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

kilog
quint
litre
L.S.
L.S.

1.70
0.28
0.38
6.76
5.33

40.00
450.00
30.00
1.49
1.49

Day
Day
Day

1.00
1.00
2.00

301.00
273.00
247.00
Total:
1291.41

Add water charges @ 1% on

Add C.P & OH @15% on

1304.32
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 150.00
Rs 150.00

Item Code: 18.28.2

Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 125 mm diameter pipe.

Code

DSR-12

Description
Details of cost for 10 joints

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

Page 849 of 2298

1881
0761
0771
9999
9999
0116
0117
0114

Materials :Spun yarn 0.20x10=2.00 kg.

Fuel wood
Kersosene oil
Sundries
Carriage of materials
LabourFitter
Asstt. Fitter
Beldar

kilog
quint
litre
L.S.
L.S.

2.00
0.37
0.76
9.49
9.49

40.00
450.00
30.00
1.49
1.49

Day
Day
Day

1.50
1.50
3.00

301.00
273.00
247.00
Total:
1899.58

Add water charges @ 1% on

Add C.P & OH @15% on

1918.58
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 220.64
Rs 220.65

Item Code: 18.28.3

Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 150 mm diameter pipe.

Code

1881
0761
0771
9999
9999
0116
0117
0114

Description
Details of cost for 10 joints
MATERIALS :Spun yarn 0.23x10=2.30 kg,
Fuel Wood
Kerosene oil
Sundries
Carriage of materials
LABOURFitter
Asstt. Fitter
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

kilog
quint
litre
L.S.
L.S.

2.30
0.42
0.76
10.79
10.79

40.00
450.00
30.00
1.49
1.49

Day
Day
Day

1.50
1.50
3.00

301.00
273.00
247.00
Total:
1937.96

Add water charges @ 1% on

Add C.P & OH @15% on

1957.34
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 225.09
Rs 225.10

Item Code: 18.28.4

Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) :
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 joints
MATERIALS :1881
Spun yarn 0.3x10=3.00 kg.
kilog
3.00
0761
Fuel wood
quint
0.56
0771
Kerosene oil
litre
0.76
9999
Sundries
L.S.
13.52
9999
Carriage of materials
L.S.
13.52
LABOUR
0116
Fitter
Day
2.00
0117
Asstt. Fitter
Day
2.00

DSR-12

Rate

40.00
450.00
30.00
1.49
1.49
301.00
273.00

Page 850 of 2298

0114

Beldar

Day

4.00

Add water charges @ 1% on

247.00
Total:
2571.08

Add C.P & OH @15% on

2596.79
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 298.63
Rs 298.65

Item Code: 18.28.5

Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 250 mm diameter pipe.

Code

1881
0761
0771
9999
9999
0116
0117
0114

Description
Details of cost for 10 joints
MATERIALS :Spun yarn 0.4x10=4 00 kg.
Fuel Wood
Kerosene oil
Sundries
Carriage of materials
LABOURFitter
Asstt. Fitter
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

kilog
quint
litre
L.S.
L.S.

4.00
0.65
1.14
17.55
17.55

40.00
450.00
30.00
1.49
1.49

Day
Day
Day

2.50
2.50
5.00

301.00
273.00
247.00
Total:
3209.00

Add water charges @ 1% on

Add C.P & OH @15% on

3241.09
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 372.73
Rs 372.70

Item Code: 18.28.6

Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 300 mm diameter pipe.

Code

1881
0761
0771
9999
9999
0116
0117
0114

Description
Details of cost for 10 joints
MATERIALS :Spun yarn 0.54x10 =5.40 kg
Fuel Wood
Kerosene oil
Sundries
Carriage of materials
LABOURFitter
Asstt. Fitter
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

kilog
quint
litre
L.S.
L.S.

5.40
0.75
1.52
20.28
20.28

40.00
450.00
30.00
1.49
1.49

Day
Day
Day

3.00
3.00
6.00

301.00
273.00
247.00
Total:
3863.54

Add water charges @ 1% on

Add C.P & OH @15% on

3902.18
Cost for 10.00 Nos
Rate per Each:

DSR-12

Rs 448.75

Page 851 of 2298

Rate as per DSR-12:

Rs 448.75

Item Code: 18.28.7

Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 350 mm diameter pipe.

Code

1881
0761
0771
9999
9999
0116
0117
0114

Description
Details of cost for 10 joints
MATERIALS :Spun yarn 0.62x10=6.20 kg
Fuel Wood
Kerosene oil
Sundries
Carriage of materials
LABOURFitter
Asstt. Fitter
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

kilog
quint
litre
L.S.
L.S.

6.20
0.93
1.70
24.18
24.18

40.00
450.00
30.00
1.49
1.49

Day
Day
Day

3.00
3.00
6.00

301.00
273.00
247.00
Total:
3993.56

Add water charges @ 1% on

Add C.P & OH @15% on

4033.50
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 463.85
Rs 463.85

Item Code: 18.28.8

Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 400 mm diameter pipe.

Code

1881
0761
0771
9999
9999
0116
0117
0114

Description
Details of cost for 10 joints
MATERIALS :Spun yarn 0.74x10=7.40 kg
Fuel Wood
Kerosene oil
Sundries
Carriage of materials
LABOURFitter
Asstt. Fitter
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

kilog
quint
litre
L.S.
L.S.

7.40
1.12
1.70
26.91
26.91

40.00
450.00
30.00
1.49
1.49

Day
Day
Day

4.00
4.00
8.00

301.00
273.00
247.00
Total:
5203.20

Add water charges @ 1% on

Add C.P & OH @15% on

5255.23
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 604.35
Rs 604.35

Item Code: 18.28.9

Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 450 mm diameter pipe.

Code

DSR-12

Description

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

Page 852 of 2298

1881
0761
0771
9999
9999
0116
0117
0114

Details of cost for 10 joints

MATERIALS :Spun yarn 0.79x10=7.90 kg.
Fuel Wood
Kerosene oil
Sundries
Carriage of materials
LABOURFitter
Asstt. Fitter
Beldar

kilog
quint
litre
L.S.
L.S.

7.90
1.21
2.27
31.07
31.07

40.00
450.00
30.00
1.49
1.49

Day
Day
Day

4.50
4.50
9.00

301.00
273.00
247.00
Total:
5827.18

Add water charges @ 1% on

Add C.P & OH @15% on

5885.45
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 676.83
Rs 676.85

Item Code: 18.28.10

Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 500 mm diameter pipe.

Code

1881
0761
0771
9999
9999
0116
0117
0114

Description
Details of cost for 10 joints
MATERIALS:Sgun yarn 0.85x10=8.50 kg.
Fuel wood
Kerosene oil
Sundries
Carriage of materials
LABOURFitter
Asstt. Fitter
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

kilog
quint
litre
L.S.
L.S.

8.50
1.31
2.27
33.67
33.67

40.00
450.00
30.00
1.49
1.49

Day
Day
Day

4.75
4.75
9.50

301.00
273.00
247.00
Total:
6170.94

Add water charges @ 1% on

Add C.P & OH @15% on

6232.65
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 716.76
Rs 716.75

Item Code: 18.28.11

Providing lead caulked joints to spun iron or CI pipes but (excluding the cost of pig lead) : 600 mm diameter pipe.

Code

1881
0761
0771
9999
9999

DSR-12

Description
Details of cost for 10 joints
MATERIALS :Spun yarn 1.02x10=10.20 kg.
Fuel wood
Kerosene oil
Sundries
Carriage of materials
LABOUR-

Details of Cost for : 10.00 Nos

Unit
Quantity

kilog
quint
litre
L.S.
L.S.

10.20
1.68
2.84
40.30
40.30

Rate

40.00
450.00
30.00
1.49
1.49

Page 853 of 2298

0116
0117
0114

Fitter
Asstt. Fitter
Beldar

Day
Day
Day

6.50
6.50
13.00

Add water charges @ 1% on

301.00
273.00
247.00
Total:
8311.30

Add C.P & OH @15% on

8394.41
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 965.36
Rs 965.35

Item Code: 18.29

Code
1397
2341

Details of Cost for : 1.00 Qtl

Unit
Quantity

Description
MATERIALS:
Lead
Carrigae

kilog
tonne

100.00
0.10

Add water charges @ 1% on

Rate
90.00
77.87
Total:
9007.79

Add C.P & OH @15% on

9097.87
Cost for 1.00 Qtl
Rate per One Qtl:
Rate as per DSR-12:

Rs 10462.55
Rs 10462.55

Item Code: 18.30.1

Providing flanged joints to double flanged CI pipes:- 80 mm diameter pipe.
Code

1373
1956
9999
0116
0117
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 joints
MATERIALS :Rubber insertion 3mm thick
Bolts and nuts 16mm dia, 60 mmlong
Carriage of matonal
LABOURFitter
Asstt. Fitter
Beldar

Rate

each
each
L.S.

10.00
40.00
2.73

11.00
10.00
1.49

Day
Day
Day

0.15
0.15
0.80

301.00
273.00
247.00
Total:
797.77

Add water charges @ 1% on

Add C.P & OH @15% on

805.75
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 92.66
Rs 92.65

Item Code: 18.30.2

Providing flanged joints to double flanged CI pipes:- 100 mm diameter pipe.
Code

1374
1956

DSR-12

Description
Details of cost for 10 joints
MATERIALS :Rubber insertion 3mm thick
Bolts and nuts 16mm dia, 60 mm long

Details of Cost for : 10.00 Nos

Unit
Quantity

each
each

10.00
80.00

Rate

14.00
10.00

Page 854 of 2298

9999
0116
0117
0114

Carriage of materials
LABOURFitter
Asstt. Fitter
Beldar

L.S.

4.16

1.49

Day
Day
Day

0.25
0.25
1.00

301.00
273.00
247.00
Total:
1336.70

Add water charges @ 1% on

Add C.P & OH @15% on

1350.07
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 155.26
Rs 155.25

Item Code: 18.30.3

Providing flanged joints to double flanged CI pipes:- 125 mm diameter pipe.
Code

1375
1957
9999
0116
0117
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 joints
MATERIALS:Rubber insertion 3mrn thick
Bolts and nuts 16mm dia 65mm long
Carriage of materials
LABOURFitter
Asstt. Fitter
Beldar

Rate

each
each
L.S.

10.00
80.00
4.16

15.00
11.00
1.49

Day
Day
Day

0.25
0.25
1.00

301.00
273.00
247.00
Total:
1426.70

Add water charges @ 1% on

Add C.P & OH @15% on

1440.97
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 165.71
Rs 165.70

Item Code: 18.30.4

Providing flanged joints to double flanged CI pipes:- 150 mm diameter pipe.
Code

1376
1958
9999
0116
0117
0114

Description
Details of cost for 10 joints
MATERIALS :Rubber insertion 3mm thick
Bolts and nuts 20 mm dia, 65mm long
Carriage of material
LABOURFitter
Asstt. Fitter
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

each
each
L.S.

10.00
80.00
4.16

17.00
13.00
1.49

Day
Day
Day

0.30
0.30
1.10

301.00
273.00
247.00
Total:
1660.10

Add water charges @ 1% on

Add C.P & OH @15% on

1676.70
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 192.82
Rs 192.80

Page 855 of 2298

Item Code: 18.30.5

Providing flanged joints to double flanged CI pipes:- 200 mm diameter pipe.
Code

1377
1959
9999
0116
0117
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 joints
Materials :Rubber insertion 3mm thick
Bolts and nuts 20mm dia 70mm long
Carrage of materials
LabourFitter
Asstt. Fitter
Beldar

Rate

each
each
L.S.

10.00
80.00
4.16

22.00
13.00
1.49

Day
Day
Day

0.30
0.30
1.10

301.00
273.00
247.00
Total:
1710.10

Add water charges @ 1% on

Add C.P & OH @15% on

1727.20
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 198.63
Rs 198.65

Item Code: 18.30.6

Providing flanged joints to double flanged CI pipes:- 250 mm diameter pipe.
Code

1378
1960
9999
0116
0117
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 joints
MATERIALS :Rubber insertign 3mm thick
Bolts and nuts 20mm dia 75mm long
LABOURCarriage of material
Fitter
Asstt. Fitter
Beldar

each
each
L.S.
Day
Day
Day

Rate

10.00
120.00

32.00
14.00

5.33
0.40
0.40
1.30

1.49
301.00
273.00
247.00
Total:
2558.64

Add water charges @ 1% on

Add C.P & OH @15% on

2584.23
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 297.19
Rs 297.20

Item Code: 18.30.7

Providing flanged joints to double flanged CI pipes:- 300 mm diameter pipe.
Code

1379
1960
9999
0116
0117
0114

DSR-12

Description
Details of cost for 10 joints
MATERIALS :Rubber insertion 3mm thick
Bolts and nuts 20mm dia 75mm long
Carnage of materials
LABOURFitter
Asstt. Fitter
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

each
each
L.S.
Day
Day
Day

Rate

10.00
120.00
5.33

40.00
14.00
1.49

0.40
0.40
1.30

301.00
273.00
247.00

Page 856 of 2298

Add water charges @ 1% on

Total:
2638.64

Add C.P & OH @15% on

2665.03
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 306.48
Rs 306.50

Item Code: 18.30.8

Providing flanged joints to double flanged CI pipes:- 350 mm diameter pipe.
Code

1380
1961
9999
0116
0117
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 joints
MATERIALS :Rubber insertion 3mm thick
Bolts and nuts 20mm dia 80 mmlong
Carriage of materials
LABOURFitter
Asstt. Fitter
Beldar

each
each
L.S.
Day
Day
Day

Rate

10.00
160.00
5.33

45.00
15.00
1.49

0.50
0.50
1.50

301.00
273.00
247.00
Total:
3515.44

Add water charges @ 1% on

Add C.P & OH @15% on

3550.59
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 408.32
Rs 408.30

Item Code: 18.30.9

Providing flanged joints to double flanged CI pipes:- 400 mm diameter pipe.
Code

1381
1962
9999
0116
0117
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 joints
Materials :Rubber insertion 3mm thick
Bolts and nuts 24mm dia 85mm long
Carriage of materials
LabourFitter
Asstt. Fitter
Beldar

each
each
L.S.
Day
Day
Day

Rate

10.00
160.00
8.06

67.00
27.00
1.49

0.50
0.50
1.50

301.00
273.00
247.00
Total:
5659.51

Add water charges @ 1% on

Add C.P & OH @15% on

5716.11
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 657.35
Rs 657.35

Item Code: 18.30.10

Providing flanged joints to double flanged CI pipes:- 450 mm diameter pipe.
Code

DSR-12

Description

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

Page 857 of 2298

1382
1962
9999
0116
0117
0114

Details of cost for 10 joints

MATERIALS :Rubber insertion 3mm thick
Bolts and nuts 24mm dia 85mm long
Crriage of materials
LABOURFitter
Asstt. Fitter
Beldar

each
each
L.S.
Day
Day
Day

10.00
200.00
8.06

84.00
27.00
1.49

0.60
0.60
1.70

301.00
273.00
247.00
Total:
7016.31

Add water charges @ 1% on

Add C.P & OH @15% on

7086.47
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 814.94
Rs 814.95

Item Code: 18.30.11

Providing flanged joints to double flanged CI pipes:- 500 mm diameter pipe.
Code

1383
1963
9999
0116
0117
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
Details of cost for 10 joints
MATERIALS :Rubber insertion 3 mm thick
Bolts and nuts 24 mm dia 90 mm long
Carriage of materials
LABOURFitter
Asstt. Fitter
Beldar

each
each
L.S.
Day
Day
Day

Rate

10.00
200.00
8.06

106.00
29.00
1.49

0.65
0.65
1.80

301.00
273.00
247.00
Total:
7689.71

Add water charges @ 1% on

Add C.P & OH @15% on

7766.61
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 893.16
Rs 893.15

Item Code: 18.30.12

Providing flanged joints to double flanged CI pipes:- 600 mm diameter pipe.
Code

1384
1964
9999
0116
0117
0114

Description
Details of cost for 10 joints
MATERIALS :Rubber insertion 3mm thick
Bolds and nuts 20mm dia 75mm long
Carriage of materials
LABOURFitter
Asstt. Fitter
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

each
each
L.S.
Day
Day
Day

Rate

10.00
200.00
9.49

118.00
35.00
1.49

0.75
0.75
2.00

301.00
273.00
247.00
Total:
9118.64

Add water charges @ 1% on

Add C.P & OH @15% on

9209.83
Cost for 10.00 Nos

DSR-12

Page 858 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 1059.13
Rs 1059.15

Item Code: 18.31.1.1

P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 100 mm diameter : Class I.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 sluice valves
MATERIALS :1940
100mm dia. sluice valves (with cap)
each
10.00
Carriage pf sluice valves
2309
wt.= 44.3x10=443kg= 0.443t. say 0.44t
tonne
0.44
Labour for laying sluice valve
18.024
Laying S & S or flanged C.I. special such as tees, bends, collars,
4.43
tapers and caps etc.
Providing flanged joints to sluice valves with bolts, nuts and
rubber insertion etc.
18.030.02 Providing flanged joints to double flanged CI pipes:- 100 mm
20.00
diameter pipe.
Add water charges @ 1% except on [A]+[B] i.e on

Rate

2300.00
77.67
186.11

155.26
Total:
23034.17

Add C.P & OH @15% except on [A]+[B] i.e on

23264.51
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 3068.39
Rs 3068.35

Item Code: 18.31.1.2

P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 100 mm diameter : Class II.

Code

3311
2309
18.024

18.030.02

Details of Cost for : 10.00 Nos

Description
Unit
Quantity
Details of cost for 10 sluice valves
MATERIALS :100mm dia. sluice.valves (wiith cap)
each
10.00
Carriage of sluice valves
wt.= 56.3x10=563kg = 0.563 t. say 0.56t
tonne
0.56
Labour for laying sluice valve
Laying S & S or flanged C.I. special such as tees, bends, collars,
5.63
tapers and caps etc.
Providing flanged joints to sluice valves with bolts, nuts and
rubber insertion etc.
Providing flanged joints to double flanged CI pipes:- 100 mm
20.00
diameter pipe.
Add water charges @ 1% except on [A]+[B] i.e on

Rate

2650.00
77.67
186.11

155.26
Total:
26543.50

Add C.P & OH @15% except on [A]+[B] i.e on

26808.94
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 3498.33
Rs 3498.30

Item Code: 18.31.2.1

P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 125 mm diameter : Class I.

DSR-12

Page 859 of 2298

Code

1941
2309
18.024

18.030.03

Details of Cost for : 10.00 Nos

Description
Unit
Quantity
Details of cost for 10 sluice valves
MATERIALS :125mm dia. sluice valves (with cap)
each
10.00
Carriage of sluice valves
wt. = 56.3x10= 563kg = 0.563t.say 0.56t
tonne
0.56
Labour for laying sluice valve
Laying S & S or flanged C.I. special such as tees, bends, collars,
5.63
tapers and caps etc.
Providing flanged joints to sluice valves with bolts, nuts and
rubber insertion etc.
Providing flanged joints to double flanged CI pipes:- 125 mm
20.00
diameter pipe.
Add water charges @ 1% except on [A]+[B] i.e on

Rate

2600.00
77.67
186.11

165.71
Total:
26043.50

Add C.P & OH @15% except on [A]+[B] i.e on

26303.94
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 3461.15
Rs 3461.15

Item Code: 18.31.2.2

P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 125 mm diameter : Class II.

Code

3314
2309

18.024

18.030.03

Details of Cost for : 10.00 Nos

Description
Unit
Quantity
Details of cost for 10 sluice valves
MATERIALS:125mm dia. sluice valves (with cap)
each
10.00
Carriage of sluice valve
tonne
0.68
wt.= 68.3x10 = 683 kg = 0.638 t say 0.68 tonne
Labour for laying sluice valve
Laying S & S or flanged C.I. special such as tees, bends, collars,
6.83
tapers and caps etc.
Providing flanged joints to sluice valves with bolts, nuts and
rubber insertion etc.
Providing flanged joints to double flanged CI pipes:- 125 mm
20.00
diameter pipe.
Add water charges @ 1% except on [A]+[B] i.e on

Rate

3200.00
77.67

186.11

165.71
Total:
32052.82

Add C.P & OH @15% except on [A]+[B] i.e on

32373.35
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 4181.47
Rs 4181.45

Item Code: 18.31.3.1

P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 150 mm diameter : Class I.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 sluice valves
MATERIALS :1942
150mm dia sluice valves (with cap)
each
10.00
Carriage of sluice valves
2309
wt. =72.5x10=725kg=0.725t.say 0.72t
tonne
0.72

DSR-12

Rate

3410.00
77.67

Page 860 of 2298

18.024

18.030.04

Labour for laying sluice valve

Laying S & S or flanged C.I. special such as tees, bends, collars,
tapers and caps etc.
Providing flanged joints to sluice valves with bolts, nuts and
rubber insertion etc.
Providing flanged joints to double flanged CI pipes:- 150 mm
diameter pipe.

7.25

186.11

20.00

192.82

Add water charges @ 1% except on [A]+[B] i.e on

Total:
34155.92

Add C.P & OH @15% except on [A]+[B] i.e on

34497.48
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 4487.78
Rs 4487.75

Item Code: 18.31.3.2

P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 150 mm diameter : Class II.

Code

3317
2309
18.024

18.030.04

Details of Cost for : 10.00 Nos

Description
Unit
Quantity
Details of cost for 10 sluice valves
MATERIALS :150mm dia. sluice valves (with cap)
each
10.00
Carriage of sluice valves
wt.= 86.5x10=865kg =0.865t. say 0.865t
tonne
0.865
Labour for laying sluice valve
Laying S & S or flanged C.I. special such as tees, bends, collars,
8.65
tapers and caps etc.
Providing flanged joints to sluice valves with bolts, nuts and
rubber insertion etc.
Providing flanged joints to double flanged CI pipes:- 150 mm
20.00
diameter pipe.
Add water charges @ 1% except on [A]+[B] i.e on

Rate

4000.00
77.67
186.11

192.82
Total:
40067.18

Add C.P & OH @15% except on [A]+[B] i.e on

40467.85
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 5200.43
Rs 5200.40

Item Code: 18.31.4.1

P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 200 mm diameter : Class I.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 sluice valves
MATERIALS :1943
200mm dia,sluice valves (with cap)
each
10.00
Carriage of sluice valves
2309
wt.= 121.5x10=1215kg= 1.215t. say 1.22t
tonne
1.22
Labour for laying sluice valve
18.024
Laying S & S or flanged C.I. special such as tees, bends, collars,
12.15
tapers and caps etc.
Providing flanged joints to sluice valves with bolts, nuts and
rubber insertion etc.
18.030.05 Providing flanged joints to double flanged CI pipes:- 200 mm
20.00
diameter pipe.

DSR-12

Rate

6550.00
77.67
186.11

198.63

Page 861 of 2298

Add water charges @ 1% except on [A]+[B] i.e on

Total:
65594.76

Add C.P & OH @15% except on [A]+[B] i.e on

66250.71
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 8242.22
Rs 8242.25

Item Code: 18.31.4.2

P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 200 mm diameter : Class II.

Code

3320
2309
18.024

18.030.05

Details of Cost for : 10.00 Nos

Description
Unit
Quantity
Details of cost for 10 sluice valves
MATERIALS :200mm dia. sluice .valves (with cap)
each
10.00
Carriage of sluice valves
wt.= 150.5x10=1505kg=1.505t. say 1.5t
tonne
1.50
Labour for laying sluice valve
Laying S & S or flanged C.I. special such as tees, bends, collars,
15.05
tapers and caps etc.
Providing flanged joints to sluice valves with bolts, nuts and
rubber insertion etc.
Providing flanged joints to double flanged CI pipes:- 200 mm
20.00
diameter pipe.
Add water charges @ 1% except on [A]+[B] i.e on

Rate

9100.00
77.67
186.11

198.63
Total:
91116.51

Add C.P & OH @15% except on [A]+[B] i.e on

92027.68
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 11260.54
Rs 11260.60

Item Code: 18.31.5.1

P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 250 mm diameter : Class I.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 sluice valves
MATERIALS :1944
250mm dia. sluice valves (with cap)
each
10.00
Carriage of sluice valves
2309
wt.= 179.9x10=1799kg= 1.799t. say 1.80t
tonne
1.80
Labour for laying sluice valve
18.024
Laying S & S or flanged C.I. special such as tees, bends, collars,
17.99
tapers and caps etc.
Providing flanged joints to sluice valves with bolts, nuts and
rubber insertion etc.
18.030.06 Providing flanged joints to double flanged CI pipes:- 250 mm
20.00
diameter pipe.
Add water charges @ 1% except on [A]+[B] i.e on

Rate

9550.00
77.67
186.11

297.19
Total:
95639.81

Add C.P & OH @15% except on [A]+[B] i.e on

96596.21
Cost for 10.00 Nos
Rate per Each:

DSR-12

Rs 12037.76

Page 862 of 2298

Rate as per DSR-12:

Rs 12037.80

Item Code: 18.31.5.2

P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 250 mm diameter : Class II.

Code

3321
2309
18.024

18.030.06

Details of Cost for : 10.00 Nos

Description
Unit
Quantity
Rate
Details of cost for 10 sluice valves
MATERIALS :250mm dia. sluice valves (with cap)
each
10.00
13500.00
Carriage of sluice valves
wt. =229.9x10=2299kg =2299t. say 2.30t
tonne
2.30
77.67
Labour for laying sluice valve
Laying S & S or flanged C.I. special such as tees, bends, collars,
22.99
186.11
tapers and caps etc.
Providing flanged joints to sluice valves with bolts, nuts and
rubber insertion etc.
Providing flanged joints to double flanged CI pipes:- 250 mm
20.00
297.19
diameter pipe.
Total:
Add water charges @ 1% except on [A]+[B] i.e on
135178.64
Add C.P & OH @15% except on [A]+[B] i.e on
136530.43
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 16723.25
Rs 16723.30

Item Code: 18.31.6.1

P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 300 mm diameter : Class I.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Rate
Details of cost for 10 sluice valves
MATERIALS :1945
300mm dia sluice valves (with cap)
each
10.00
13500.00
Carriage of sluice valves
2309
wt.= 242.4x10=2424kg = 2.42t. say 2.42t
tonne
2.42
77.67
Labour for laying sluice valve
18.024
Laying S & S or flanged C.I. special such as tees, bends, collars,
24.24
186.11
tapers and caps etc.
Providing flanged joints to sluice valves with bolts, nuts and
rubber insertion etc.
18.030.07 Providing flanged joints to double flanged CI pipes:- 300 mm
20.00
306.48
diameter pipe.
Total:
Add water charges @ 1% except on [A]+[B] i.e on
135187.96
Add C.P & OH @15% except on [A]+[B] i.e on
136539.84
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 16766.17
Rs 16766.25

Item Code: 18.31.6.2

P/F C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions : 300 mm diameter : Class II.
Details of Cost for : 10.00 Nos

DSR-12

Page 863 of 2298

Code

3326
2309
18.024

18.030.07

Description
Unit
Details of cost for 10 sluice valves
MATERIALS :300mm dia. sluice, valves (with cap)
each
Carriage of sluice valves
wt.= 303.4x10=3034kg=3.304t.
tonne
Labour for laying sluice valve
Laying S & S or flanged C.I. special such as tees, bends, collars,
tapers and caps etc.
Providing flanged joints to sluice valves with bolts, nuts and
rubber insertion etc.
Providing flanged joints to double flanged CI pipes:- 300 mm
diameter pipe.

Quantity

Rate

10.00

17000.00

3.034

77.67

30.34

186.11

20.00

306.48

Add water charges @ 1% except on [A]+[B] i.e on

Total:
170235.65

Add C.P & OH @15% except on [A]+[B] i.e on

171938.01
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 20950.49
Rs 20950.60

Item Code: 18.32.1

Constructing masonry Chamber 30 x 30 x 50 cm, inside for stop cock, with C.I. surface box :- With F.P.S. bricks.

Code

02.008.01
02.025

04.001.11

06.001.01

13.009.01
1304
9999

DSR-12

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for one chamber
MATERIALS :(i) Earth work in excavation including refilling and disposal of
surplus earth
0.68x0.68x0.65m=0.301cum.
E/W excavation in foundation trenches .. .. All kinds of soil.
0.30
Filling available excavated earth (excluding rock) .. ..
(ii) Cement concrete 1:5:10 (1 Cement: 5 fine sand : 10 graded
stone aggregate 40mm nominal size)
0.68x0.68x0.075m=0.035cum. Say 0.04 cum.
P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag
(iii) Second class brick work in cement mortar 1:4 (1 Cement:
4 coarse sand) in foundations and plinth
1.66mx0.115x0.50m=0.095cum. Say 0.10 cum.
Brick work with F.P.S. bricks of class desgn 75 in foundation
and plinth in: CM 1:4 (1 cem
(iv) 12mm cement plaster 1:3 (1 Cement: 3 Coarse sand)
finished with a floating coat of neat cement.
1.20x0.50=0.60sqm.
0.30x0.30=0.09sqm.
=0.69sqm. Say 0.70sqm.
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
(A) (v) C.I. surface box with hinged cover
each
100x100x75mm (inside)
(A) (vi) Carriage of C.I. surface box
L.S.
(vii) Cement concrete 1:2:4 (1 Cement: 2 Coarse sand ; 4
graded stone aggregate 20mm nominal size) in slab =
0.53mx0.53mx0.075m = 0.02107cum.
Less surface box 0.112x0.112x0.076

Rate

130.78

0.30

83.80

0.04

3087.47

0.10

3508.25

0.70

173.09

1.00

100.00

1.43

1.49

Page 864 of 2298

0115

=(-)0.00094 cum.
= 0.0201 cum. Say 0.02cum.
RCC in beams, suspended floors, staircases, etc upto floor 5
level excldg centering, shutt
Coolie (deduct for not lifting mat. Upto floor v level)
day

9999

(A) (viii) Sundries

05.003

L.S.

0.02

5494.55

-0.038

247.00

4.16

1.49
Total:
98.94

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

99.93
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 884.67
Rs 908.95

Item Code: 18.33.1

Constructing masonry Chamber 60 x 60 x 75 cm, inside for sluice valve with CI surface box :- With non modular bricks

Code

02.008.01
02.025

04.001.11

06.001.01

13.009.01
1305
9999

05.003

0115

DSR-12

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for one chamber
MATERIALS :(i) Earth work in excavation including refilling and disposal of
surplus earth
1.21 x 1.21 x 1.00m= 1.464cum.
E/W excavation in foundation trenches .. .. All kinds of soil.
1.46
Filling available excavated earth (excluding rock) .. ..
(ii) Cement concrete 1:5:10 (1 Cement: 5 fine sand : 10 graded
stone aggregate 40mm nominal size)
1.21xl.21x0.1m=0.146cum. Say 0.15 cum.
P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag
(iii) Second class brick work in cement mortar 1: 4(1 Cement:
4coarse sand) in foundations and plinth
3.32mx0.23mx0.75m=0.573cum. Say 0.57 cum.
Brick work with F.P.S. bricks of class desgn 75 in foundation
and plinth in: CM 1:4 (1 cem
(iv) 12mm cement plaster 1:3 (1 Cement: 3 Coarse sand)
finished with a floating coat of neat cement.
2.40x0.75=1.80sqm
0.60x0.60=0.36sqm.
=2.16sqm.
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
(A) (v) C.I. surface box with hinged cover
each
100x100x75mm (inside)
(A) (vi) Carriage of C.I. surface box
L.S.
(vii) Cement concrete 1:2:4 (1 Cement: 2 Coarse sand ; 4
graded stone aggregate 20mm nominal size)
in slab = 1.06mx1.06mx0.15m = 0.1685 cum.
Less surface box 3.142/4xdxd xO. 18m 0.7854x0.156mx0.156mx0.18 = (-)0.0034
cum = 0.1651 cum. Say 0.17 cum.
RCC in beams, suspended floors, staircases, etc upto floor 5
level excldg centering, shutt
Less labour for not lifting material upto floor five level
Coolie
Day
(viii) Mild steel reinforcement for RCC work etc.

Rate

130.78

1.46

83.80

0.15

3087.47

0.57

3508.25

2.16

173.09

1.00

185.00

8.06

1.49

0.17

5494.55

-0.32

247.00

Page 865 of 2298

05.022.01

05.009.03
9999

0.165cum.x80kg/cum. = 13.2kg.
Reinforcement for R.C.C. work all complete. -Upto plinth level
Mild steel and Medium Tensi
(ix) Form work 0.60mx0.60m=0.36sqm.+
3.32mx0.15m=0.50sqm.
= 0.86 sqm.
Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi
(A) (x) Sundries
L.S.

13.20

56.77

0.86

311.22

8.06

1.49
Total:
129.98

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

131.28
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 5252.03
Rs 5392.90

Item Code: 18.34.1

Constructing masonry Chamber 90 x 90 x 100 cm inside for sluice valve with CI surface box :- With common burnt non-modular
bricks
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one chamber
MATERIALS :(i) Earth work in excavation including refilling and disposal of
surplus earth
1.51X1.51X1.25M
02.008.01 E/W excavation in foundation trenches .. .. All kinds of soil.
2.85
130.78
02.025

04.001.11

06.001.01

13.009.01
1305
9999

05.003

DSR-12

Filling available excavated earth (excluding rock) .. ..

(ii) Cement concrete 1:5:10(1 Cement: 5 fine sand : 10 graded
stone aggregate 40mm nominal size)
1.51x1.51x0.lm=0.228cum. Say 0.23 cum.
P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag
(iii) Second class brick work in cement mortar
1:4 (1 Cement: 4coarse sand) in foundations and plinth
4.52mxO.23mx 1.00m= 1.04cum.
Brick work with F.P.S. bricks of class desgn 75 in foundation
and plinth in: CM 1:4 (1 cem
(iv) 12mm cement plaster 1:3 (1 Cement: 3 Coarse sand)
finished with a floating coat of neat cement.
3.60mxl.00m=3.60sqm.
0.90mx0.90m=0.81sqm.
=4.41 sqm.
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
(A) (v) C.I. surface box with chained lid.
each
(A) (vi) Carriage of C.I. surface box
L.S.
(vii) Cement concrete 1:2:4 (1 Cement: 2 Coarse sand ; 4
graded stone aggregate 20mm nominal size)
in slab = 1.36mx 1.36mx0.15m = 0.2774 cum.
Less surface box
0.7854x0.156mxO. 156mx0.18m = (-)0.0034 cum.
= 0.2740 cum. Say 0.27 cum.
RCC in beams, suspended floors, staircases, etc upto floor 5
level excldg centering, shutt

2.85

83.80

0.23

3087.47

1.04

3508.25

4.41

173.09

1.00
8.06

185.00
1.49

0.27

5494.55

Page 866 of 2298

Deduct labour for not lifting material upto floor five level
0115

05.022.01

05.009.03
9999

Coolie
Day
(viii) Mild steel reinforcement for RCC work etc.
0.274cum.x80kg/cum. = 21.92 kg.
Reinforcement for R.C.C. work all complete. -Upto plinth level
Mild steel and Medium Tensi
(ix) Form work 0.90mx0.90m=0.81sqm.+
4.52mxO.15m = 0.68 sqm.
= 1.49 sqm.
Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi
(A) (x) Sundries
L.S.

-0.51

247.00

21.92

56.77

1.49

311.22

8.06

1.49
Total:
83.05

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

83.88
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 9021.69
Rs 9277.10

Item Code: 18.35.1

Constructing masonry Chamber 120x 120x100 cm, inside for sluice valve, with C.I. surface box :- With F.P.S. bricks.

Code

02.008.01
02.025

04.001.11

06.001.01

13.009.01
1305
9999

DSR-12

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for one chamber
MATERIALS :(i) Earth work in excavation including refilling and disposal of
surplus earth
1.81X1.81X1.25M
E/W excavation in foundation trenches .. .. All kinds of soil.
4.10
Filling available excavated earth (excluding rock) .. ..
(ii) Cement concrete 1:5:10 (1 Cement: 5 fine sand : 10 graded
stone aggregate 40mm nominal size)
1.81xl.81x0.1m=0.328cum. Say 0.33 cum.
P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag
(iii) Second class brick work in cement mortar 1:4 (1 Cement:
4coarse sand) in foundations and plinth
5.72mx0.23mxl.00m=1.316cum. Say 1.32 cum.
Brick work with F.P.S. bricks of class desgn 75 in foundation
and plinth in: CM 1:4 (1 cem
(iv) 12mm cement plaster 1:3 (1 Cement: 3 Coarse sand)
finished with a floating coat of neat cement.
4.80mxl.00m=4.80sqm.
1.20mxl.20m=1.44sqm. =6.42sqm.
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
(A) (v) C.I. surface box with chained lid.
each
(A) (vi) Carriage of C.I. surface box
L.S.
(vii) Cement concrete 1:2:4 (1 Cement: 2 Coarse sand ; 4
graded stone aggregate 20mm nominal size)
in slab = 1.66mx 1.66mxO. 15m = 0.4133 cum.
Less surface box
0.7854x0.156mx0.156mxO. 18m = (-)0.0034 cum.
= 0.4099 cum. Say 0.41 cum.

Rate

130.78

4.10

83.80

0.33

3087.47

1.32

3508.25

6.42

173.09

1.00
8.06

185.00
1.49

Page 867 of 2298

05.003

RCC in beams, suspended floors, staircases, etc upto floor 5

level excldg centering, shutt
Deduct labour for not lifting material upto floor five level

0115

Coolie
Day
(viii) Mild steel reinforcement for RCC slab steel @ 80kg/cum.

05.022.01

05.009.03
9999

0.41cum.x80kg/cum. = 32.80kg.
Reinforcement for R.C.C. work all complete. -Upto plinth level
Mild steel and Medium Tensi
(ix) Form work 1.20mxl.20m=1.44sqm.+
5.72mx0.15m=0.86sqm.
= 2.30sqm.
Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi
(A) (x) Sundries
L.S.

0.41

5494.55

-0.77

247.00

32.80

56.77

2.30

311.22

8.06

1.49
Total:
18.83

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

19.02
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 12493.29
Rs 12866.45

Item Code: 18.36.1

Constructing masonry Chamber 60x 60x75 cm, inside for sluice valve, with C.I. surface box :- With common burnt non-modular
bricks
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one chamber
MATERIALS :(i) Earth work in excavation including refilling and disposal of
surplus earth
1.21X1.21X1.00M = 1.464 cum say 1.46cum
02.008.01 E/W excavation in foundation trenches .. .. All kinds of soil.
1.46
130.78
02.025

04.001.11

06.001.01

13.009.01
1305
9999

DSR-12

Filling available excavated earth (excluding rock) .. ..

(ii) Cement concrete 1:5:10 (1 Cement: 5 fine sand : 10 graded
stone aggregate 40mm nominal size)
1.21xl.21x0.1m=0.146cum. Say 0.15 cum.
P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag
(iii) Second class brick work in cement mortar 1:4 (1 Cement:
4coarse sand) in foundations and plinth
3.32mx0.23mx0.75m=0.573cum. Say 0.57 cum.
Brick work with F.P.S. bricks of class desgn 75 in foundation
and plinth in: CM 1:4 (1 cem
(iv) 12mm cement plaster 1:3 (1 Cement: 3 Coarse sand)
finished with a floating coat of neat cement.
2.40mx0.75m=1.80sqm.
0.90mx0.90m=0.36sqm
=2.16sqm

1.46

83.80

0.15

3087.47

0.57

3508.25

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a

floating coat of neat cement.
(A) (v) C.I. surface box with chained lid.
each
(A) (vi) Carriage of C.I. surface box
L.S.

2.16

173.09

1.00
53.82

185.00
1.49

Page 868 of 2298

05.003

0115

05.022.01

05.009.03
9999

(vii) Cement concrete 1:2:4 (1 Cement: 2 Coarse sand ; 4

graded stone aggregate 20mm nominal size)
in slab = 1.06mx 1.06mx0. 15m = 0.1685 cum.
Less surface box 0.61x0.41x0.15m= (-)0.0375 cum
=0.131 cum Say:0.13cum
RCC in beams, suspended floors, staircases, etc upto floor 5
level excldg centering, shutt
Deduct labour for not lifting material upto floor five level
Coolie
Day
(viii) Mild steel reinforcement for RCC slab steel @ 80kg/cum.
0.131cum.x80kg/cum. = 10.48kg.
Reinforcement for R.C.C. work all complete. -Upto plinth level
Mild steel and Medium Tensi
(ix) Form work 0.60mx0.60m=0.36sqm.+
3.32mx0.15m=0.50sqm.
= 0.86sqm.
Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi
(A) (x) Sundries
L.S.

0.13

5494.55

-0.24

247.00

10.48

56.77

0.86

311.22

8.06

1.49
Total:
217.92

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

220.10
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 4979.99
Rs 5106.65

Item Code: 18.37.1

Constructing masonry chamber 60x45x50 cm inside for water meter C.I. double flap surface box :- With common burnt nonmodular bricks
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one chamber.
MATERIALS:(i) Earth work in excavation including refilling and disposal of
surplus earth
1.21X1.06X0.85m = 1.09 cum
02.008.01 E/W excavation in foundation trenches .. .. All kinds of soil.
1.09
130.78
02.025

04.001.11

06.001.01

13.009.01

DSR-12

Filling available excavated earth (excluding rock) .. ..

(ii) Cement concrete 1:5:10 (1 Cement: 5 fine sand : 10 graded
stone aggregate 40mm nominal size)
1.21 x 1.06x0. lm=0.128cum. Say 0.13 cum.
P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum
Fine sand, 40mmstone ag
(iii) Second class brick work in cement mortar 1:4 (1 Cement:
4 coarse sand) in foundations and plinth
3.02mx0.23mx0.50m=0.347cum. Say 0.35 cum.
Brick work with F.P.S. bricks of class desgn 75 in foundation
and plinth in: CM 1:4 (1 cem
(iv) 12mm cement plaster 1:3 (1 Cement: 3 Coarse sand)
finished with a floating coat of neat cement.
2.10mx0.50m=l .05sqm.
0.60mx0.45m=0.27sqm.
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.

1.09

83.80

0.13

3087.47

0.35

3508.25

1.32

173.09

Page 869 of 2298

1307
9999

05.003

0115

05.022.01

05.009.03
9999

(A) (v) C.I. surface box 400x200x200mm (inside) with locking each
arrangement
(A) (vi) Carriage of C.I. surface box
L.S.
(vii) Cement concrete 1:2:4 (1 Cement: 2 Coarse sand ; 4
graded stone aggregate 20 mmnominal size)
in slab = 1.06mx0.91mx0.25m = 0.241 cum.
Less surface box 0.42x0.22mx0.2m= (-)0.018 cum = 0.223
cum. Say 0.22 cum.
RCC in beams, suspended floors, staircases, etc upto floor 5
level excldg centering, shutt
Deduct labour for not lifting material upto floor five level
Coolie
Day
(viii) Mild steel reinforcement for RCC work steel @
80kg/cum.
0.223 cum.x80kg/cum. = 17.84 kg.
Reinforcement for R.C.C. work all complete. -Upto plinth level
Mild steel and Medium Tensi
(ix) Form work 0.60mx0.45m=0.27sqm.+
3.02mx0.25m=0.76sqm.
Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi
(A) (x) Sundries
L.S.

1.00

205.00

13.52

1.49

0.22

5494.55

-0.41

247.00

17.84

56.77

1.03

311.22

8.06

1.49
Total:
135.88

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

137.24
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 4791.60
Rs 4925.60

Item Code: 18.38.1

Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, : 15 mm diameter pipe.

Code

13.050.03

13.061.01
9999

Details of Cost for : 10.00 m

Description
Unit
Quantity
Perimeter = 0.0673 metre
Area10x0.0673rn = 0.673sqm.
Priming Coat
Applying priming coat : With ready mixed red oxide zinc
0.673
chromate primer on steel galvanise
Painting two coats excluding priming coat with white paint on
new work.
Painting with synthetic enamel paint : Two or more coats on Sqm
0.673
new work
(A) Add for delay
L.S.
13.52
Add water charges @ 1% except on [A]+[B] i.e on

Rate

20.72

53.87
1.49
Total:
20.14

Add C.P & OH @15% except on [A]+[B] i.e on

20.34
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 7.36
Rs 7.35

Item Code: 18.38.2

DSR-12

Page 870 of 2298

Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, : 20 mm diameter pipe.

Code

Description
Perimeter = 0.0845 metre
Area10x0.0845rn = 0.845sqm.

Details of Cost for : 10.00 m

Unit
Quantity

Rate

Priming Coat
13.050.03
13.061.01
9999

Applying priming coat : With ready mixed red oxide zinc Sqm
chromate primer on steel galvanise
Painting with synthetic enamel paint : Two or more coats on Sqm
new work
Add for delay
L.S.

0.845

20.72

0.845

53.87

13.52

1.49
Total:
20.14

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

20.34
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 8.64
Rs 8.65

Item Code: 18.38.3

Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, : 25 mm diameter pipe.
Details of Cost for : 10.00 m
Unit
Quantity

Code

Description
Perimeter = 0.1061 metre
Area= 10x0.1061 sqm. = 1.061 sqm
Priming coat

13.050.03

Applying priming coat : With ready mixed red oxide zinc Sqm
chromate primer on steel galvanise
Painting with synthetic enamel paint : Two or more coats on Sqm
new work
Add for delay
L.S.

13.061.01
9999

Rate

1.061

20.72

1.061

53.87

20.28

1.49
Total:
30.22

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

30.52
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 11.42
Rs 11.40

Item Code: 18.38.4

Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, : 32 mm diameter pipe.

Code

DSR-12

Description
Perimeter = 0.1334 metre
Area = 10x0.1334 sqm. = 1.334 sqm.
Priming Coat

Details of Cost for : 10.00 m

Unit
Quantity

Rate

Page 871 of 2298

13.050.03
13.061.01
9999

Applying priming coat : With ready mixed red oxide zinc Sqm
chromate primer on steel galvanise
Painting with synthetic enamel paint : Two or more coats on Sqm
new work
Add for delay
L.S.

1.334

20.72

1.334

53.87

20.28

1.49
Total:
30.22

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

30.52
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 13.46
Rs 13.45

Item Code: 18.38.5

Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, : 40 mm diameter pipe.

Code

13.050.03
13.061.01
9999

Details of Cost for : 10.00 m

Description
Unit
Quantity
Perimeter = 0.1520 metre
Area = 10x0.1520 sqm.= 1.520 sqm.
Priming Coat
Applying priming coat : With ready mixed red oxide zinc Sqm
1.52
chromate primer on steel galvanise
Painting with synthetic enamel paint : Two or more coats on Sqm
1.52
new work
Add for delay
L.S.
26.91
Add water charges @ 1% except on [A]+[B] i.e on

Rate

20.72
53.87

1.49
Total:
40.10

Add C.P & OH @15% except on [A]+[B] i.e on

40.50
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 16.00
Rs 16.00

Item Code: 18.38.6

Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, : 50mm diameter pipe.
Details of Cost for : 10.00 m
Unit
Quantity

Code

Description
Perimeter = 0.1894 metre
Area= 10x0.1894 sqm. = 1.894 sqm.
Priming Coat

13.050.03

Applying priming coat : With ready mixed red oxide zinc Sqm
chromate primer on steel galvanise
Painting with synthetic enamel paint : Two or more coats on Sqm
new work
Add for delay
L.S.

13.061.01
9999

Rate

1.894

20.72

1.894

53.87

26.91

1.49
Total:
40.10

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

40.50
Cost for 10.00 m

DSR-12

Page 872 of 2298

Rate per One Metre:

Rate as per DSR-12:

Rs 18.79
Rs 18.80

Item Code: 18.39.1

Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 15 mm diameter pipe.

Code
14.054.01
9999

Details of Cost for : 10.00 m

Description
Unit
Quantity
Painting with synthetic enamel paint - : One or more coats on Sqm
0.673
old work.
Add for delay
L.S.
8.06

Rate
35.19
1.49
Total:
12.01

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

12.13
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 3.76
Rs 3.75

Item Code: 18.39.2

Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 20 mm diameter pipe.

Code
14.054.01
9999

Details of Cost for : 10.00 m

Description
Unit
Quantity
Painting with synthetic enamel paint - : One or more coats on Sqm
0.845
old work.
Add for delay
L.S.
8.06

Rate
35.19
1.49
Total:
12.01

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

12.13
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 4.37
Rs 4.35

Item Code: 18.39.3

Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 25 mm diameter pipe.

Code
14.054.01
9999

Details of Cost for : 10.00 m

Description
Unit
Quantity
Painting with synthetic enamel paint - : One or more coats on Sqm
1.061
old work.
Add for delay
L.S.
10.79
Add water charges @ 1% except on [A] i.e on

Rate
35.19
1.49
Total:
16.08

Add C.P & OH @15% except on [A] i.e on

16.24
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 5.60
Rs 5.60

Item Code: 18.39.4

DSR-12

Page 873 of 2298

Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 32 mm diameter pipe.

Code
14.054.01
9999

Details of Cost for : 10.00 m

Description
Unit
Quantity
Painting with synthetic enamel paint - : One or more coats on Sqm
1.334
old work.
Add for delay
L.S.
10.92

Rate
35.19
1.49
Total:
16.27

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

16.43
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 6.58
Rs 6.60

Item Code: 18.39.5

Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 40 mm diameter pipe.

Code
14.054.01
9999

Details of Cost for : 10.00 m

Description
Unit
Quantity
Painting with synthetic enamel paint - : One or more coats on Sqm
1.52
old work.
Add for delay
L.S.
13.52

Rate
35.19
1.49
Total:
20.14

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

20.34
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 7.69
Rs 7.70

Item Code: 18.39.6

Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 50 mm diameter pipe.

Code
14.054.01
9999

Details of Cost for : 10.00 m

Description
Unit
Quantity
Painting with synthetic enamel paint - : One or more coats on Sqm
1.894
old work.
Add for delay
L.S.
13.52
Add water charges @ 1% except on [A] i.e on

Rate
35.19
1.49
Total:
20.14

Add C.P & OH @15% except on [A] i.e on

20.34
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 9.00
Rs 9.00

Item Code: 18.40.1

Painting G.I. pipes with two coats of anti-corrosive bitumastic paint - : 15 mm diameter pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
13.065.01 Painting with black anti-corrosive bitumastic paint : Two or Sqm
0.673
more coats on new work.
9999
Add for delay
L.S.
8.06

DSR-12

Rate
44.56
1.49

Page 874 of 2298

Add water charges @ 1% except on [A] i.e on

Total:
12.01

Add C.P & OH @15% except on [A] i.e on

12.13
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 4.39
Rs 4.40

Item Code: 18.40.2

Painting G.I. pipes with two coats of anti-corrosive bitumastic paint - : 20mm diameter pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
13.065.01 Painting with black anti-corrosive bitumastic paint : Two or Sqm
0.845
more coats on new work.
9999
Add for delay
L.S.
8.06
Add water charges @ 1% except on [A] i.e on

Rate
44.56
1.49
Total:
12.01

Add C.P & OH @15% except on [A] i.e on

12.13
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 5.16
Rs 5.15

Item Code: 18.40.3

Painting G.I. pipes with two coats of anti-corrosive bitumastic paint - : 25 mm diameter pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Painting with anti-corrosive paint two coats.
13.065.01 Painting with black anti-corrosive bitumastic paint : Two or
1.061
more coats on new work.
9999
(A) Add for delay
L.S.
10.79
Add water charges @ 1% except on [A] i.e on

Rate
44.56
1.49
Total:
16.08

Add C.P & OH @15% except on [A] i.e on

16.24
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 6.60
Rs 6.60

Item Code: 18.40.4

Painting G.I. pipes with two coats of anti-corrosive bitumastic paint - : 32 mm diameter pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS:
13.065.01 Painting with black anti-corrosive bitumastic paint : Two or Sqm
1.334
more coats on new work.
9999
Add for delay
L.S.
10.79
Add water charges @ 1% except on [A] i.e on

Rate
44.56
1.49
Total:
16.08

Add C.P & OH @15% except on [A] i.e on

16.24
Cost for 10.00 m
Rate per One Metre:

DSR-12

Rs 7.81

Page 875 of 2298

Rate as per DSR-12:

Rs 7.80

Item Code: 18.40.5

Painting G.I. pipes with two coats of anti-corrosive bitumastic paint - : 40 mm diameter pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS:
13.065.01 Painting with black anti-corrosive bitumastic paint : Two or Sqm
1.52
more coats on new work.
9999
Add for delay
L.S.
12.22
Add water charges @ 1% except on [A] i.e on

Rate
44.56
1.49
Total:
18.21

Add C.P & OH @15% except on [A] i.e on

18.39
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 8.89
Rs 8.90

Item Code: 18.40.6

Painting G.I. pipes with two coats of anti-corrosive bitumastic paint - : 50 mm diameter pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS:
13.065.01 Painting with black anti-corrosive bitumastic paint : Two or Sqm
1.894
more coats on new work.
9999
Add for delay
L.S.
12.22
Add water charges @ 1% except on [A] i.e on

Rate
44.56
1.49
Total:
18.21

Add C.P & OH @15% except on [A] i.e on

18.39
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 10.56
Rs 10.55

Item Code: 18.40.7

Painting GI pipes with anti- corrosive bitumastic paint 65 mm dia pipe.
Code
13.065.01
9999

Details of Cost for : 10.00 m

Description
Unit
Quantity
Painting with anti-corrosive paint two coats.
Painting with black anti-corrosive bitumastic paint : Two or
2.387
more coats on new work.
(A) Add for delay
L.S.
13.52
Add water charges @ 1% except on [A] i.e on

Rate
44.56
1.49
Total:
20.14

Add C.P & OH @15% except on [A] i.e on

20.34
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 12.98
Rs 12.95

Item Code: 18.40.8

Painting GI pipes with anti- corrosive bitumastic paint 80 mm dia pipe.
Details of Cost for : 10.00 m

DSR-12

Page 876 of 2298

Code
13.065.01
9999

Description
Unit
Painting with anti-corrosive paint two coats.
Painting with black anti-corrosive bitumastic paint : Two or
more coats on new work.
(A) Add for delay
L.S.

Quantity

Rate

2.796

44.56

14.82

1.49
Total:
22.08

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

22.30
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 15.02
Rs 15.00

Item Code: 18.41.1

P/F sand of grading zone V or coarser grade all- round the G.I. pipes in external work -15 mm diameter pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS:
Width of sand filling = 300mm
Depth of sand filling under the pipe=75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 21.8mm
= 246.8mm say 247mm
Quantity of sand = 10x0.30x0.247 = 0.744'
cum.
Less for pipe = 3.142/4(0.0218)^2 x10 = (-)0.004 cum.
= 0.74 cum.
Cost of sand filling for 10 metre pipe
18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum
no.18.41.1

Rate

0.74

637.00

Add water charges @ 1% on

Total:
471.38

Add C.P & OH @15% on

476.09
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 54.75
Rs 54.75

Item Code: 18.41.2

P/F sand of grading zone V or coarser grade all- round the G.I. pipes in external work -20 mm diameter pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS:
Details of cost of sand filling alround 20mm
dia. pipe 10 metre long.
Width of sand filling = 300mm
Depth of sand filling under the pipe=75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 27.3mm
= 252.3 Say 252mm
Quantity of sand = 10x0.30x0.252 = 0.756
cum.
Less for pipe =3.142/4(0.0273)^2 x10 =
(-)0.006cum.
= 0.750 cum

DSR-12

Rate

Page 877 of 2298

18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum
no.18.41.1

0.75

637.00

Add water charges @ 1% on

Total:
477.75

Add C.P & OH @15% on

482.53
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 55.49
Rs 55.50

Item Code: 18.41.3

P/F sand of grading zone V or coarser grade all- round the G.I. pipes in external work -25 mm diameter pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS:
Details of cost of sand filling alround 25mm
dia. pipe 10 metre long.
Width of sand filling = 300mm
Depth of sand filling under the pipe=75mm
Above the pipe = 150mm
Max. external dia of pipe = 34.2mm
= 259.2 Say 259mm
Quantity of sand = 10x0.30x0.259 = 0.777
cum.
Less for pipe 3.142/4 (0.0342)^2 x 10 =
(-)0.009cum.
= 0.768 Say 0.77 cum.
18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum
no.18.41.1

Rate

0.77

637.00

Add water charges @ 1% on

Total:
490.49

Add C.P & OH @15% on

495.39
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 56.97
Rs 56.95

Item Code: 18.41.4

P/F sand of grading zone V or coarser grade all- round the G.I. pipes in external work -32 mm diameter pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS:
Details of cost of sand filling alround 32mm
dia. pipe 10 metre long.
Width of sand filling = 300mm
Depth of sand filling under the pipe=75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 42.9mm
= 267.9 Say 268mm
Quantity of sand =0x0.30x0.268 =0.804 cum
Less for pipe 3.142/4(0.0429) x 10
= (-)0.014cum.
= 0.790 Say 0.79 cum.

DSR-12

Rate

Page 878 of 2298

18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum
no.18.41.1

0.79

637.00

Add water charges @ 1% on

Total:
503.23

Add C.P & OH @15% on

508.26
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 58.45
Rs 58.45

Item Code: 18.41.5

P/F sand of grading zone V or coarser grade all- round the G.I. pipes in external work -40 mm diameter pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS:
Details of cost of sand filling alround 40mm
dia. pipe 10 metre long.
Width of sand filling = 300mm
Depth of sand filling under the pipe=75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 48.8mm
= 273.8 Say 274mm
Quantity of sand = 10x0.30x0.274 = 0.82cum
Less for pipe 3.142/4(0.0488) x10
(-)0.014cum.
= 0.801 Say 0.80 cum.
18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum
no.18.41.1

Rate

0.80

637.00

Add water charges @ 1% on

Total:
509.60

Add C.P & OH @15% on

514.70
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 59.19
Rs 59.20

Item Code: 18.41.6

P/F sand of grading zone V or coarser grade all- round the G.I. pipes in external work -50 mm diameter pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS:
Details of cost of sand filling alround 50mm
dia. pipe 10 metre long.
Width of sand filling = 300mm
Depth of sand filling under the pipe=75mm+
Above the pipe =150mm+
Max. external dia of pipe = 60.8mm
= 285.8 Say 286mm
Quantity of sand =10x0.30x0.286 =0.858 cum
Less for pipe 3.142/4(0.0608) xl0 =
(-)0.029cum.
= 0.829 Say 0.83 cum.
18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum
no.18.41.1

DSR-12

0.83

Rate

637.00

Page 879 of 2298

Add water charges @ 1% on

Total:
528.71

Add C.P & OH @15% on

534.00
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 61.41
Rs 61.40

Item Code: 18.41.7

P/F sand alround GI pipes 65 mm dia pipe.
Details of Cost for : 10.00 m
Description
Unit
Quantity
Details of cost of sand filling alround 65mm dia. pipe 10 metre
long.
Width of sand filling = 300mm
Depth of sand filling under the pipe=75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 76.6mm
= 301.6 Say 302mm
Quantity of sand =10x0.45x0.302 =1.359cum
Less for pipe 3.142/4(0.0766) x10 =
(-)0.046cum.
= 1.313 Say 1.31 cum.
Cost of sand filling for 10 metre pipe
18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum
1.31
no.18.41.1
Code

Add water charges @ 1% on

Rate

637.00
Total:
834.47

Add C.P & OH @15% on

842.81
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 96.92
Rs 96.95

Item Code: 18.41.8

P/F sand alround GI pipes 80 mm dia pipe.
Details of Cost for : 10.00 m
Description
Unit
Quantity
Details of cost of sand filling alround 80mm dia. pipe 10 metre
long.
Width of sand filling = 300mm
Depth of sand filling under the pipe=75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 89.9mm
= 314.9 Say 315mm
Quantity of sand = 10x0.45x0.315= 1.418
cum.+
Less for pipe 3.142/4(0.0899) x10 =
(-)0.0640cum.
= 1.354 Say 1.35 cum.
Cost of sand filling for 10 metre pipe
18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum
1.35
no.18.41.1
Code

Add water charges @ 1% on

DSR-12

Rate

637.00
Total:
859.95

Page 880 of 2298

Add C.P & OH @15% on

868.55
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 99.88
Rs 99.90

Item Code: 18.41.9

P/F sand alround GI pipes 100 mm dia pipe.
Details of Cost for : 10.00 m
Description
Unit
Quantity
Details of cost of sand filling alround 100mm dia. pipe 10
metre long.
Width of sand filling = 300mm
Depth of sand filling under the pipe=75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 115mm
= 340mm
Quantity of sand = 10x0.45x0.34 = 1.53 cum.+
Less for pipe 3.142/4(0.115)2x10
= (-)0.10 cum.
= 1.43 cum.
Cost of sand filling for 10 metre pipe
18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum
1.43
no.18.41.1
Code

Add water charges @ 1% on

Rate

637.00
Total:
910.91

Add C.P & OH @15% on

920.02
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 105.80
Rs 105.80

Item Code: 18.41.10

P/F sand alround GI pipes 150 mm dia pipe.
Details of Cost for : 10.00 m
Description
Unit
Quantity
Details of cost of sand filling alround 150mm dia. pipe 10
metre long.
Width of sand filling = 300mm
Depth of sand filling under the pipe 75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 166.5mm
= 391.50mm Say 0.392m
Quantity of sand = 10x0.60x0.392 = 2.35
cum.+
Less for pipe 3.142/4(0.167) x10 =
(-)0.22cum.
= 2.13 cum.
Cost of sand filling for 10 metre pipe
18.041.01-A Cost of sand filling for 10m pipe as Fig 'A" marked under item Cum
2.13
no.18.41.1
Code

Add water charges @ 1% on

Rate

637.00
Total:
1356.81

Add C.P & OH @15% on

1370.38
Cost for 10.00 m

DSR-12

Page 881 of 2298

Rate per One Metre:

Rate as per DSR-12:

Rs 157.59
Rs 157.60

Item Code: 18.42.1

Boring 100 mm dia casing pipe for hand pump /tube well in all soils Upto 6 m depth.
Details of Cost for : 6.00 m
Code
Description
Unit
Quantity
LABOUR
For boring and removing the pipe0116
Fitter
Day
0.50
0114
Beldar
Day
3.00
0010
Hire charges for derick monkey rope and other accessories
Day
0.50

301.00
247.00
775.00

1472

0.12

335.00

13.52

1.49
Total:
1339.34

9999

Depreciation @ 2% of the cost of casing pipe

6metre @ Rs. per metre
Sundries

metre
L.S.

Add water charges @ 1% on

Rate

Add C.P & OH @15% on

1352.73
Cost for 6.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 259.27
Rs 259.25

Item Code: 18.42.2

Boring 100 mm dia casing pipe for hand pump /tube well in all soils Beyond 6 to 12 m depth.
Details of Cost for : 6.00 m
Code
Description
Unit
Quantity
LABOUR
For boring and removing the pipe0116
Fitter
Day
0.62
0114
Beldar
Day
3.50
0010
Hire charges for derick monkey rope and other accessories
Day
0.62

301.00
247.00
775.00

1472

0.12

335.00

13.52

1.49
Total:
1591.96

9999

Depreciation @ 2% of the cost of casing pipe 6metre @ Rs. metre

per metre
Sundries
L.S.

Add water charges @ 1% on

Rate

Add C.P & OH @15% on

1607.88
Cost for 6.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 308.18
Rs 308.20

Item Code: 18.42.3

Boring 100 mm dia casing pipe for hand pump /tube well in all soils Beyond 12 to 18 m depth.
Details of Cost for : 6.00 m
Code
Description
Unit
Quantity
LABOUR
For boring and removing the pipe0116
Fitter
Day
0.75
0114
Beldar
Day
4.00
0010
Hire charges for derick monkey rope and other accessories
Day
0.75

DSR-12

Rate

301.00
247.00
775.00

Page 882 of 2298

1472
9999

Depreciation @ 2% of the cost of casing pipe 6metre @ Rs. metre

per metre
Sundries
L.S.

0.12

335.00

13.52

1.49
Total:
1855.34

Add water charges @ 1% on

Add C.P & OH @15% on

1873.89
Cost for 6.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 359.16
Rs 359.15

Item Code: 18.43

P/P in position filter of 40 mm dia.
Code

1882
9999
0116
0114
9999

Description
Details of cost for one strainer 1.5 long
MATERIALS
Cost of strainer 40mm diameter 1.5m long
Carriage to site
LABOUR:
Fitter
Beldar
Sundreis including hamp white lead etc.

Details of Cost for : 1.50 m

Unit
Quantity

Rate

each
L.S.

1.00
13.52

495.00
1.49

Day
Day
L.S.

0.17
0.17
7.15

301.00
247.00
1.49
Total:
618.95

Add water charges @ 1% on

Add C.P & OH @15% on

625.14
Cost for 1.50 m
Rate per One Metre:
Rate as per DSR-12:

Rs 479.27
Rs 479.25

Item Code: 18.44

P/F to filter 40 mm dia GI pipe for tube well.
Code

1549
2271
9999
0116
0114
9999

Description
Details of cost for a depth of 10 metre
MATERIALS:
(A) 40mm G.I. pipe
(A) carriage of 40mm pipe(36.5kg)
Added 2% wastage and fitting in A
White lead, hamp and oil etc.
Fitter
Beldar
Sundries

Details of Cost for : 10.00 m

Unit
Quantity

metre
tonne
L.S.
Day
Day
L.S.

Rate

10.20
0.0372

202.00
77.87

6.76
0.33
0.75
7.25

1.49
301.00
247.00
1.49
Total:
2368.75

Add water charges @ 1% on

Add C.P & OH @15% on

2392.44
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 275.13
Rs 275.15

Item Code: 18.45

P/P in position hand pump for 40 mm dia.

DSR-12

Page 883 of 2298

Code

1693
9999
0116
0114
9999

Description
Details of cost for one pump
MATERIALS:
Cost of hand pump
Carriage
LABOUR:
Fitter
Beldar
Sundries

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each
L.S.

1.00
13.52

550.00
1.49

Day
Day
L.S.

0.10
0.10
4.42

301.00
247.00
1.49
Total:
631.53

Add water charges @ 1% on

Add C.P & OH @15% on

637.85
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 733.53
Rs 733.55

Item Code: 18.46.1

P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) : 15 mm nominal bore

Code
1641
9999

Description
GI union - 15mm nominal bore.
Carriage of materials and sundries

0116
0114

Fitter grade-I
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity
each
1.00
L.S.
Day
Day

1.82
0.11
0.11

Add water charges @ 1% on

Rate
40.00
1.49
301.00
247.00
Total:
102.99

Add C.P & OH @15% on

104.02
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 119.62
Rs 119.60

Item Code: 18.46.2

P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) - 20 mm nominal bore

Code
1642
9999

Description
GI union - 20mm nominal bore.
Carriage of materials and sundries

0116
0114

Fitter grade-I
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity
each
1.00
L.S.
Day
Day

1.82
0.11
0.11

Add water charges @ 1% on

Rate
60.00
1.49
301.00
247.00
Total:
122.99

Add C.P & OH @15% on

124.22
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 142.85
Rs 142.85

Page 884 of 2298

Item Code: 18.46.3

P/F GI union in GI pipes :- 25 mm nominal bore.
Code

Description

1643
9999

MATERIALS:
G.I. Union 25 mm nominal bore
Carriage of materials and sundries

0116
0114

LABOUR :
Fitter grade-I
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

1.00

70.00

L.S.

1.82

1.49

Day
Day

0.11
0.11

301.00
247.00
Total:
132.99

Add water charges @ 1% on

Add C.P & OH @15% on

134.32
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 154.47
Rs 154.45

Item Code: 18.46.4

P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) 32 mm nominal bore

Code
1644
9999
0116
0114

Description
MATERIALS:
32mm nominal bore .
Carriage of materials and sundries
LABOUR:
Fitter
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each
L.S.

1.00
1.82

100.00
1.49

Day
Day

0.11
0.11

301.00
247.00
Total:
162.99

Add water charges @ 1% on

Add C.P & OH @15% on

164.62
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 189.31
Rs 189.30

Item Code: 18.46.5

P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) 40 mm nominal bore

Code
1645
9999
0116
0114

Description
MATERIAL
G.I. Union 40 mm nominal bore
Carriage of materials and sundries
LABOUR:
Fitter
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each
L.S.

1.00
1.82

135.00
1.49

Day
Day

0.11
0.11

301.00
247.00
Total:
197.99

Add water charges @ 1% on

Add C.P & OH @15% on

199.97
Cost for 1.00 No.
Rate per Each:

DSR-12

Rs 229.97

Page 885 of 2298

Rate as per DSR-12:

Rs 229.95

Item Code: 18.46.6

P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) 50 mm nominal bore

Code
1646
9999
0116
0114

Description
MATERIALS:
50mm nominal bore.
Carriage of materials and sundries
LABOUR:
Fitter
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each
L.S.

1.00
1.82

180.00
1.49

Day
Day

0.15
0.15

301.00
247.00
Total:
264.91

Add water charges @ 1% on

Add C.P & OH @15% on

267.56
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 307.69
Rs 307.70

Item Code: 18.46.7

P/F GI union in GI pipes :- 65 mm nominal bore.
Code

1647
9999
0116
0114

Description
Details of cost for one no.
MATERIALS:
65m.m nominal bore
Carriage of materials and sundries
LABOURS
Fitter
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each
L.S.

1.00
1.82

390.00
1.49

Day
Day

0.15
0.15

301.00
247.00
Total:
474.91

Add water charges @ 1% on

Add C.P & OH @15% on

479.66
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 551.61
Rs 551.60

Item Code: 18.46.8

P/F GI union in GI pipes :- 80 mm nominal bore.
Code

1648
9999
0116
0114

DSR-12

Description
Details of cost for one no.
MATERIALS:
80mm nominal bore
Carriage of materials and sundries
LABOURS
Fitter
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each
L.S.

1.00
1.82

480.00
1.49

Day
Day

0.15
0.15

Add water charges @ 1% on

301.00
247.00
Total:
564.91

Add C.P & OH @15% on

570.56

Page 886 of 2298

Cost for 1.00 No.

Rate per Each:
Rate as per DSR-12:

Rs 656.14
Rs 656.15

Item Code: 18.47.1

P/F G.I. Union in existing G.I. pipe line, cutting and threading including excavation, refilling ...complete wherever required : 15 mm
nominal bore.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
1641
GI union - 15mm nominal bore.
each
1.00
40.00
9999
Carriage of materials and sundries
L.S.
1.82
1.49
LABOUR:
0116
Fitter grade-I
Day
0.33
301.00
0114
Beldar
Day
0.33
247.00
Total:
Add water charges @ 1% on
223.55
Add C.P & OH @15% on
225.79
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 259.66
Rs 259.65

Item Code: 18.47.2

P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) - 20mm nominal bore

Code

Description

1642
9999

MATERIALS:
GI union - 20mm nominal bore.
Carriage of materials and sundries

0116
0114

LABOUR:
Fitter grade-I
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

1.00

60.00

L.S.

1.82

1.49

Day
Day

0.33
0.33

301.00
247.00
Total:
243.55

Add water charges @ 1% on

Add C.P & OH @15% on

245.99
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 282.89
Rs 282.90

Item Code: 18.47.3

P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) - 25 mm nominal bore

Code

DSR-12

Description

1643
9999

MATERIALS:
GI union - 25mm nominal bore.
Carriage of materials and sundries

0116

LABOUR:
Fitter grade-I

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

1.00

70.00

L.S.

1.82

1.49

Day

0.33

301.00

Page 887 of 2298

0114

Beldar

Day

0.33

Add water charges @ 1% on

247.00
Total:
253.55

Add C.P & OH @15% on

256.09
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 294.50
Rs 294.50

Item Code: 18.47.4

P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) - 32 mm nominal bore

Code
1644
9999
0116
0114

Description
MATERIALS:
GI union - 32mm nominal bore.
Carriage of materials and sundries
LABOUR:
Fitter grade-I
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each
L.S.

1.00
1.82

100.00
1.49

Day
Day

0.33
0.33

301.00
247.00
Total:
283.55

Add water charges @ 1% on

Add C.P & OH @15% on

286.39
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 329.35
Rs 329.35

Item Code: 18.47.5

P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) - 40 mm nominal bore

Code

Description

1645
9999

MATERIALS:
GI union - 40mm nominal bore.
Carriage of materials and sundries

0116
0114

LABOUR:
Fitter grade-I
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

1.00

135.00

L.S.

1.82

1.49

Day
Day

0.33
0.33

301.00
247.00
Total:
318.55

Add water charges @ 1% on

Add C.P & OH @15% on

321.74
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 370.00
Rs 370.00

Item Code: 18.47.6

P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) -50 mm nominal bore

Code

Description

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

MATERIALS:

DSR-12

Page 888 of 2298

1646
9999

GI union - 50mm nominal bore.

Carriage of materials and sundries

0116
0114

LABOUR:
Fitter grade-I
Beldar

each

1.00

180.00

L.S.

1.82

1.49

Day
Day

0.45
0.45

301.00
247.00
Total:
429.31

Add water charges @ 1% on

Add C.P & OH @15% on

433.60
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 498.64
Rs 498.65

Item Code: 18.47.7

P/F G.I. Union in G.I. pipe including cutting and threading the pipe . complete (New work) 15 mm nominal bore

Code
1647
9999
0116
0114

Description
MATERIALS:
65mm nominal bore
Carriage of material and sundries
LABOUR:
Fitter
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each
L.S.

1.00
1.82

390.00
1.49

Day
Day

0.45
0.45

301.00
247.00
Total:
639.31

Add water charges @ 1% on

Add C.P & OH @15% on

645.70
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 742.56
Rs 742.55

Item Code: 18.47.8

P/F GI Union in existing GI pipe line 80 mm nominal bore.
Code

1648
9999
0116
0114

Description
Details of cost for one no.
MATERIALS:
80mm nominal bore
Carriage of material and sundries
LABOUR:
Fitter
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each
L.S.

1.00
1.82

480.00
1.49

Day
Day

0.45
0.45

301.00
247.00
Total:
729.31

Add water charges @ 1% on

Add C.P & OH @15% on

736.60
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 847.09
Rs 847.10

Item Code: 18.48

DSR-12

Page 889 of 2298

Prdgand placing on terrace polyethylene water storage tank ISI : 12701 ....but without fittings and the base support for tank

Code

Description

1649
9999

MATERIALS:
Polyeethylene water storage tank
Carriage to site

9999

Placing at terrace

Details of Cost for : 500.00 Ltr

Unit
Quantity

Rate

per l

500.00

4.45

L.S.

179.40

1.49

L.S.

89.70

1.49
Total:
2625.96

Add water charges @ 1% on

Add C.P & OH @15% on

2652.22
Cost for 500.00 Ltr
Rate per One Litre:
Rate as per DSR-12:

Rs 6.10
Rs 6.10

Item Code: 18.49.1

P/F C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
7257
15mm diameter C.P. brass bib cock
each
1.00
9999
Carriage of material and fixing changes
L.S.
11.57
Add water charges @ 1% on

Rate
325.00
1.49
Total:
342.24

Add C.P & OH @15% on

345.66
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 397.51
Rs 397.50

Item Code: 18.50.1

P/F C.P. long brass bib cock of approved quality conforming to ISstandards and weighing not less than 810 gms -15 mm nominal
bore.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7258
CP brass 15mm dia long nose bib cock
each
1.00
330.00
9999
Carriage of material and fixing changes
L.S.
16.25
1.49
Total:
Add water charges @ 1% on
354.21
Add C.P & OH @15% on
357.75
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 411.41
Rs 411.40

Item Code: 18.51.1

P/F C.P. brass long body bib cock of approved quality conforming to ISstandards and weighing not less than 690 gms. 15 mm
nominal bore.
Details of Cost for : 1.00 No.

DSR-12

Page 890 of 2298

Code

7259
9999

Description
Details of cost for one no.
Materials:
15mm diameter C.P. brass long body bib cock
Carriage of material and fixing changes

Unit

Quantity

Rate

each
L.S.

1.00
13.91

350.00
1.49
Total:
370.73

Add water charges @ 1% on

Add C.P & OH @15% on

374.44
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 430.61
Rs 430.60

Item Code: 18.52.1

P/F C.P. brass stop cock of approved quality conforming to IS:8931 15 mm nominal bore.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
7260
15mm dia CP brass stop cock (concealed)
each
1.00
9999
Carriage of material and fixing changes
L.S.
11.57
Add water charges @ 1% on

Rate
350.00
1.49
Total:
367.24

Add C.P & OH @15% on

370.91
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 426.55
Rs 426.55

Item Code: 18.53.1

P/F C.P. brass angle valve for basin mixer and geyser points- conforming to IS:8931 a) 15 mm nominal bore
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
7261
CP brass angle valve
each
1.00
9999
Carriage of material and fixing changes
L.S.
11.31
Add water charges @ 1% on

Rate
370.00
1.49
Total:
386.85

Add C.P & OH @15% on

390.72
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 449.33
Rs 449.35

Item Code: 18.54.1

P/F PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long. Wt. not less than 88 gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7400
PTMT bib cock - 15mm dia
each
1.00
100.00
9999
Carriage of material and fixing changes
L.S.
8.06
1.49
Total:

DSR-12

Page 891 of 2298

Add water charges @ 1% on

112.01

Add C.P & OH @15% on

113.13
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 130.10
Rs 130.10

Item Code: 18.54.2

P/F PTMT bib cock of approved quality and colour. 15mm nominal bore, 122mm long. Wt. not less than 99 gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7401
15mm dia PTMT bibcock (122mm long)
each
1.00
140.00
9999
Carriage of material and fixing changes
L.S.
8.06
1.49
Total:
Add water charges @ 1% on
152.01
Add C.P & OH @15% on
153.53
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 176.56
Rs 176.55

Item Code: 18.54.3

P/F PTMT bib cock of approved quality and colour. 15mm nominal bore, 165 mm long. Wt. not less than 110 gms.

Code
7402
9999

Description
MATERIALS:
15mm dia PTMT bibcock (180mm long)
Carriage of material and fixing changes

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

1.00

160.00

L.S.

8.06

1.49
Total:
172.01

Add water charges @ 1% on

Add C.P & OH @15% on

173.73
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 199.79
Rs 199.80

Item Code: 18.54.4

P/F PTMT bib cock of approved quality and colour. 15mm nominal bore, 90mm long. Wt. not less than 93 gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7859
PTMT Bib Cock with nozzle 15 mm
each
1.00
133.00
9999
Carriage of material and fixing changes
L.S.
8.06
1.49
Total:
Add water charges @ 1% on
145.01
Add C.P & OH @15% on
146.46
Cost for 1.00 No.

DSR-12

Page 892 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 168.43
Rs 168.45

Item Code: 18.55.1

P/F PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86mm long. Wt. not less than 88 gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7403
15 mm dia PTMT stop cock (male
each
1.00
100.00
9999
Carriage of material and fixing changes
L.S.
8.06
1.49
Total:
Add water charges @ 1% on
112.01
Add C.P & OH @15% on
113.13
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 130.10
Rs 130.10

Item Code: 18.55.2

P/F PTMT bib cock of approved quality and colour. 20mm nominal bore, 89mm long. Wt. not less than 88 gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7405
20 mm dia. PTMT stop cock
each
1.00
130.00
9999
Carriage of material and fixing changes
L.S.
8.06
1.49
Total:
Add water charges @ 1% on
142.01
Add C.P & OH @15% on
143.43
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 164.94
Rs 164.95

Item Code: 18.55.3

P/F PTMT bib cock of approved quality and colour. 15mm nominal bore, 108mm long. Wt. not less than 108 gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7861
PTMT Stop Cock (concealed)15 mm
each
1.00
173.00
9999
Carriage of material and fixing changes
L.S.
8.06
1.49
Total:
Add water charges @ 1% on
185.01
Add C.P & OH @15% on
186.86
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 214.89
Rs 214.90

Item Code: 18.56.1

DSR-12

Page 893 of 2298

P/F PTMT pillar cock of approved quality and colour. 15mm nominal bore, 107mm long. Wt. not less than 110 gms.

Code
7406
9999

Description
MATERIALS:
PTMT - Pillar cock - 15mm dia.
Carriage of material and fixing changes

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each

1.00

160.00

L.S.

9.49

1.49
Total:
174.14

Add water charges @ 1% on

Add C.P & OH @15% on

175.88
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 202.26
Rs 202.25

Item Code: 18.56.2

P/F PTMT pillar cock of approved quality and colour. 15mm nominal bore, 125mm long foam flow. Wt. not less than 120 gms.

Code
7410
9999

Description
MATERIALS:
PTMT Pillar cock (fancy) 15mm foam flow.
Carriage of material and fixing changes

Details of Cost for : 1.00 No.

Unit
Quantity
Nos
L.S.

1.00
9.49

Add water charges @ 1% on

Rate
225.00
1.49
Total:
239.14

Add C.P & OH @15% on

241.53
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 277.76
Rs 277.25

Item Code: 18.57.1

P/F PTMT push cock of approved quality and colour. 15mm nominal bore, 98mm long. Wt. not less than 75 gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7407
PTMT push cock 15 mm dia.
each
1.00
90.00
9999
Carriage of material and fixing changes
L.S.
8.06
1.49
Total:
Add water charges @ 1% on
102.01
Add C.P & OH @15% on
103.03
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 118.48
Rs 118.50

Item Code: 18.57.2

P/F PTMT push cock of approved quality and colour. 15mm nominal bore, 80mm long. Wt. not less than 46 gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7408
PTMT push cock 12 mm dia. 20 mm
each
1.00
80.00

DSR-12

Page 894 of 2298

9999

Carriage of material and fixing changes

L.S.

8.06

Add water charges @ 1% on

1.49
Total:
92.01

Add C.P & OH @15% on

92.93
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 106.87
Rs 106.85

Item Code: 18.58.1.1

P/F PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
7409
PTMT grating 100 mm dia.
each
1.00
9999
Carriage of material and fixing changes
L.S.
4.16
Add water charges @ 1% on

Rate
31.00
1.49
Total:
37.20

Add C.P & OH @15% on

37.57
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 43.21
Rs 43.20

Item Code: 18.58.1.2

P/F PTMT grating of approved quality and colour. Circular type. 125 mm nominal dia with 25 mm waste hole.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
7411
125 mm grating with waste hole
each
1.00
9999
Carriage of material and fixing changes
L.S.
4.16
Add water charges @ 1% on

Rate
37.00
1.49
Total:
43.20

Add C.P & OH @15% on

43.63
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 50.17
Rs 50.15

Item Code: 18.58.2.1

P/F PTMT grating of app. quality and colour. Rect. type with openable circular lid. 150 mm size square 100 mm dia. of the inner
hinged round grating.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7412
Rectangular type with openable
each
1.00
101.00
9999
Carriage of material and fixing changes
L.S.
4.16
1.49
Total:
Add water charges @ 1% on
107.20

DSR-12

Page 895 of 2298

Add C.P & OH @15% on

108.27
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 124.51
Rs 124.50

Item Code: 18.59.1

P/F C.I. double acting air valve of approved quality : 50 mm dia.
Code

7415
9999
9999

18.030.01

Description
Details of cost for 10 no. double acting air valves
MATERIALS:
50mm dia, double acting air valve
Carriage of air valves
Labour for faying double acting air valve
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc.
Providing flanged joints to double flanged CI pipes:- 80 mm
diameter pipe.

Details of Cost for : 10.00 Nos

Unit
Quantity

each
L.S.
L.S.

Rate

10.00
26.00
39.00

3370.00
1.49
1.49

10.00

92.66

Add water charges @ 1% except on [A] i.e on

Total:
33796.85

Add C.P & OH @15% except on [A] i.e on

34134.82
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 4018.16
Rs 4018.15

Item Code: 18.59.2

P/F C.I. double acting air valve of approved quality : 80 mm dia.
Code

7416
9999
9999

18.030.01

Description
Details of cost for 10 no. double acting air valves
MATERIALS:
80mm dia, double acting air valve
Carriage of air valves
Labour for faying double acting air valve
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc.
Providing flanged joints to double flanged CI pipes:- 80 mm
diameter pipe.

Details of Cost for : 10.00 Nos

Unit
Quantity

each
L.S.
L.S.

Rate

10.00
26.00
39.00

4930.00
1.49
1.49

10.00

92.66

Add water charges @ 1% except on [A] i.e on

Total:
49396.85

Add C.P & OH @15% except on [A] i.e on

49890.82
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 5830.10
Rs 5830.10

Item Code: 18.59.3

P/F C.I. double acting air valve of approved quality : 100 mm dia.
Code

7417

DSR-12

Description
Details of cost for 10 no. double acting air valves
MATERIALS:
100mm dia, double acting air valve

Details of Cost for : 10.00 Nos

Unit
Quantity

each

10.00

Rate

6400.00

Page 896 of 2298

9999
9999

18.030.02

Carriage of air valves

L.S.
Labour for laying double acting air valve
L.S.
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc.
Providing flanged joints to double flanged CI pipes:- 100 mm
diameter pipe.

26.00
52.00

1.49
1.49

10.00

155.26

Add water charges @ 1% except on [A] i.e on

Total:
64116.22

Add C.P & OH @15% except on [A] i.e on

64757.38
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 7602.36
Rs 7602.35

Item Code: 18.60.1

P/F enclosed type water meter (bulk type) conforming to IS: 2373 and tested by MB : 80 mm dia nominal bore.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one no. water meter
MATERIALS:
7418
80mm dia. water meter
each
1.00
2030.00
9999
Testing charges
L.S.
130.00
1.49
9999
Carriage of water meter
L.S.
26.00
1.49
9999
Labour for faying water meter
L.S.
39.00
1.49
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc.
18.030.01 Providing flanged joints to double flanged CI pipes:- 80 mm
2.00
92.66
diameter pipe.
Total:
Add water charges @ 1% except on [A] i.e on
2320.55
Add C.P & OH @15% except on [A] i.e on
2343.76
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2880.64
Rs 2880.60

Item Code: 18.60.2

P/F enclosed type water meter (bulk type) conforming to IS: 2373 and tested by MB : 100 mm dia nominal bore.

Code

7419
9999
9999
9999

18.030.02

Description
Details of cost for one no. water meter
MATERIALS:
100mm dia. water meter
Testing charges
Carriage of water meter
Labour for faying water meter
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc.
Providing flanged joints to double flanged CI pipes:- 100 mm
diameter pipe.

Details of Cost for : 1.00 No.

Unit
Quantity

each
L.S.
L.S.
L.S.

Rate

1.00
130.00
26.00
52.00

3150.00
1.49
1.49
1.49

2.00

155.26

Add water charges @ 1% except on [A] i.e on

Total:
3459.92

Add C.P & OH @15% except on [A] i.e on

3494.52
Cost for 1.00 No.

DSR-12

Page 897 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 4329.22
Rs 4329.20

Item Code: 18.60.3

P/F enclosed type water meter (bulk type) conforming to IS: 2373 and tested by MB : 150 mm dia nominal bore.

Code

7420
9999
9999
9999

18.030.04

Description
Details of cost for one no. water meter valves
MATERIALS:
80mm dia. water meter
Testing charges
Carriage of water meter
Labour for faying water meter
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc.
Providing flanged joints to double flanged CI pipes:- 150 mm
diameter pipe.

Details of Cost for : 1.00 No.

Unit
Quantity

each
L.S.
L.S.
L.S.

Rate

1.00
156.00
39.00
65.00

4560.00
1.49
1.49
1.49

2.00

192.82

Add water charges @ 1% except on [A] i.e on

Total:
4947.40

Add C.P & OH @15% except on [A] i.e on

4996.87
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 6132.04
Rs 6132.00

Item Code: 18.60.4

P/F enclosed type water meter (bulk type) conforming to IS: 2373 and tested by MB : 200 mm dia nominal bore.

Code

7421
9999
9999
9999

18.030.05

Description
Details of cost for one no. water meter
MATERIALS:
200mm dia. water meter
Testing charges
Carriage of water meter
Labour for faying water meter
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc.
Providing flanged joints to double flanged CI pipes:- 200 mm
diameter pipe.

Details of Cost for : 1.00 No.

Unit
Quantity

each
L.S.
L.S.
L.S.

Rate

1.00
156.00
52.00
104.00

5100.00
1.49
1.49
1.49

2.00

198.63

Add water charges @ 1% except on [A] i.e on

Total:
5564.88

Add C.P & OH @15% except on [A] i.e on

5620.53
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 6860.87
Rs 6860.90

Item Code: 18.61.1

P/F CI dirt box strainer for bulk type water conforming to IS : 2373 : 80 mm dia.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost for one no. dirt box strainer

DSR-12

Rate

Page 898 of 2298

7422
9999
9999

18.030.01

MATERIALS:
Dirt box strainer 80 mm
Carriage of dirt box strainer
Labour for faying dirt box strainer
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc.
Providing flanged joints to double flanged CI pipes:- 80 mm
diameter pipe.

each
L.S.
L.S.

1.00
26.00
39.00

2620.00
1.49
1.49

Nos

2.00

92.66

Add water charges @ 1% except on [A] i.e on

Total:
2716.85

Add C.P & OH @15% except on [A] i.e on

2744.02
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 3340.94
Rs 3340.90

Item Code: 18.61.2

P/F CI dirt box strainer for bulk type water conforming to IS : 2373 : 100 mm dia.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost for one no. dirt box strainer
MATERIALS:
7423
100mm dia. dirt box strainer
each
1.00
9999
Carriage of dirt box strainer
L.S.
26.00
9999
Labour for faying dirt box strainer
L.S.
52.00
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc.
18.030.02 Providing flanged joints to double flanged CI pipes:- 100 mm
2.00
diameter pipe.
Add water charges @ 1% except on [A] i.e on

Rate

4180.00
1.49
1.49

155.26
Total:
4296.22

Add C.P & OH @15% except on [A] i.e on

4339.18
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 5300.58
Rs 5300.55

Item Code: 18.61.3

P/F CI dirt box strainer for bulk type water conforming to IS : 2373 : 150 mm dia.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost for one no. dirt box strainer
MATERIALS:
7424
150mm dia. dirt box strainer
each
1.00
9999
Carriage of dirt box strainer
L.S.
39.00
9999
Labour for faying dirt box strainer
L.S.
65.00
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc.
18.030.04 Providing flanged joints to double flanged CI pipes:- 150 mm
2.00
diameter pipe.
Add water charges @ 1% except on [A] i.e on

Rate

5420.00
1.49
1.49

192.82
Total:
5574.96

Add C.P & OH @15% except on [A] i.e on

5630.71
Cost for 1.00 No.

DSR-12

Page 899 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 6860.96
Rs 6860.90

Item Code: 18.61.4

P/F CI dirt box strainer for bulk type water conforming to IS : 2373 : 200 mm dia.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost for one no. dirt box strainer
MATERIALS:
7425
200mm dia. dirt box strainer
each
1.00
9999
Carriage of dirt box strainer
L.S.
52.00
9999
Labour for faying dirt box strainer
L.S.
104.00
Providing flanged joints to double acting air valves with bolts,
nuts and rubber insertions etc.
18.030.05 Providing flanged joints to double flanged CI pipes:- 200 mm
2.00
diameter pipe.
Add water charges @ 1% except on [A] i.e on

Rate

7550.00
1.49
1.49

198.63
Total:
7782.44

Add C.P & OH @15% except on [A] i.e on

7860.26
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 9436.56
Rs 9436.60

Item Code: 18.62.1

P/F PTMT Ball cock of -complete with Epoxy coated- with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Wt. not less
than 138 gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7495
Ball Cock 15 mm complete with
each
1.00
134.00
9999
Carriage of material and fixing changes
L.S.
21.58
1.49
Total:
Add water charges @ 1% on
166.15
Add C.P & OH @15% on
167.81
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 192.98
Rs 193.00

Item Code: 18.62.2

P/F PTMT Ball cock of -complete with Epoxy coated- with L.P./ H.P.H.D. plastic ball. 20 mm nominal bore, 120 mm long. Wt. not less
than 198 gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7496
Ball Cock 20 mm complete with
each
1.00
195.00
9999
Carriage of material and fixing changes
L.S.
26.91
1.49
Total:
Add water charges @ 1% on
235.10
Add C.P & OH @15% on
237.45
Cost for 1.00 No.

DSR-12

Page 900 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 273.07
Rs 273.05

Item Code: 18.62.3

P/F PTMT Ball cock of -complete with Epoxy coated- with L.P./ H.P.H.D. plastic ball. 25 mm nominal bore, 152mm long. Wt. not less
than 440 gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7497
Ball Cock 25 mm complete with
each
1.00
420.00
9999
Carriage of material and fixing changes
L.S.
32.24
1.49
Total:
Add water charges @ 1% on
468.04
Add C.P & OH @15% on
472.72
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 543.63
Rs 543.65

Item Code: 18.62.4

P/F PTMT Ball cock of -complete with Epoxy coated- with L.P./ H.P.H.D. plastic ball. 40mm nominal bore, 206mm long. Wt. not less
than 690 gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7498
Ball Cock 40 mm complete with E
each
1.00
780.00
9999
Carriage of material and fixing changes
L.S.
32.24
1.49
Total:
Add water charges @ 1% on
828.04
Add C.P & OH @15% on
836.32
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 961.77
Rs 961.75

Item Code: 18.62.5

P/F P.T.M.T ball cock : 50 mm nominal bore, 242 mm long, weighing 1240 Grams.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
7499
Ball Cock 50mm Complete with Epoxy
each
1.00
Coated Aluminium Road & H.D. Ball
9999
Carriage of materials and fixing charges
L.S.
32.24
Add water charges @ 1% on

Rate
1150.00
1.49
Total:
1198.04

Add C.P & OH @15% on

1210.02
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 1391.52
Rs 1391.50

Page 901 of 2298

Item Code: 18.63

P/F PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
7500
Angle Stop cock with Flenge 15
Each
1.00
9999
Carriage of material and fixing changes
L.S.
8.06
Add water charges @ 1% on

Rate
130.00
1.49
Total:
142.01

Add C.P & OH @15% on

143.43
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 164.94
Rs 164.95

Item Code: 18.64

P/F PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
7501
Swiveling shower 15 mm
Each
1.00
9999
Carriage of material and fixing changes
L.S.
6.76
Add water charges @ 1% on

Rate
87.00
1.49
Total:
97.07

Add C.P & OH @15% on

98.04
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 112.75
Rs 112.75

Item Code: 18.65

P/F PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements.
Weighing not less than 106 gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7509
Soap dish/holder 138 x 102 x 7
Each
1.00
120.00
9999
Carriage of material and fixing changes
L.S.
6.76
1.49
Total:
Add water charges @ 1% on
130.07
Add C.P & OH @15% on
131.37
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 151.08
Rs 151.10

Item Code: 18.66.1

P/L S&S C.I.standard specials such as teea, bends, collars, tapers and caps etc. suitable as per IS : 1538: Upto 300 mm diametre.
Details of Cost for : 1.00 Qtl

DSR-12

Page 902 of 2298

Code
7708
2309
18.024

Description
Unit
MATERIALS :Cost of specials
Quint
Carriage of materials
tonne
LABOUR
Laying S & S or flanged C.I. special such as tees, bends, collars,
tapers and caps etc.

Quantity

Rate

1.00
0.10

5850.00
77.67

1.00

186.11

Add water charges @ 1% except on [A] i.e on

Total:
5857.77

Add C.P & OH @15% except on [A] i.e on

5916.35
Cost for 1.00 Qtl
Rate per One Qtl:
Rate as per DSR-12:

Rs 6989.91
Rs 6989.95

Item Code: 18.66.2

P/L S&S C.I.standard specials such as teea, bends, collars, tapers and caps etc. suitable as per IS : 1538: Above 300 mm diametre.

Code
7709
2309
18.024

Description

Details of Cost for : 1.00 Qtl

Unit
Quantity

MATERIALS :Cost of specials

Quint
Carriage of materials
tonne
LABOUR
Laying S & S or flanged C.I. special such as tees, bends, collars,
tapers and caps etc.

Rate

1.00
0.10

7500.00
77.67

1.00

186.11

Add water charges @ 1% except on [A] i.e on

Total:
7507.77

Add C.P & OH @15% except on [A] i.e on

7582.85
Cost for 1.00 Qtl
Rate per One Qtl:
Rate as per DSR-12:

Rs 8906.39
Rs 8906.40

Item Code: 18.67.1

P/L S&S C.I. standard specials suitable for mechanical joint- ing as per IS : 13382: Upto 300 mm diametre.
Details of Cost for : 1.00 Qtl
Code
Description
Unit
Quantity
MATERIALS :7710
Cost of specials
Quint
1.00
2309
Carriage of materials
tonne
0.10
LABOUR
18.024
Laying S & S or flanged C.I. special such as tees, bends, collars,
1.00
tapers and caps etc.
Add water charges @ 1% except on [A] i.e on

Rate
8200.00
77.67
186.11
Total:
8207.77

Add C.P & OH @15% except on [A] i.e on

8289.85
Cost for 1.00 Qtl
Rate per One Qtl:
Rate as per DSR-12:

Rs 9719.44
Rs 9719.45

Item Code: 18.67.2

P/L S&S C.I. standard specials suitable for mechanical joint- ing as per IS : 13382: Above 300 mm diametre.

DSR-12

Page 903 of 2298

Code
7711
2309
18.024

Description

Details of Cost for : 1.00 Qtl

Unit
Quantity

MATERIALS :Cost of specials

Quint
Carriage of materials
tonne
LABOUR
Laying S & S or flanged C.I. special such as tees, bends, collars,
tapers and caps etc.

Rate

1.00
0.10

8880.00
77.67

1.00

186.11

Add water charges @ 1% except on [A] i.e on

Total:
8887.77

Add C.P & OH @15% except on [A] i.e on

8976.65
Cost for 1.00 Qtl
Rate per One Qtl:
Rate as per DSR-12:

Rs 10509.26
Rs 10509.25

Item Code: 18.68.1

P/L S&S C.I standard specials suitable for push on jointing as per IS : 9523: Upto 600 mm diametre.
Details of Cost for : 1.00 Qtl
Code
Description
Unit
Quantity
MATERIALS :7682
Cost of specials
Quint
1.00
2309
Carriage of materials
tonne
0.10
LABOUR
18.024
Laying S & S or flanged C.I. special such as tees, bends, collars,
1.00
tapers and caps etc.
Add water charges @ 1% except on [A] i.e on

Rate
11850.00
77.67
186.11
Total:
11857.77

Add C.P & OH @15% except on [A] i.e on

11976.35
Cost for 1.00 Qtl
Rate per One Qtl:
Rate as per DSR-12:

Rs 13958.91
Rs 13958.95

Item Code: 18.68.2

P/L S&S C.I standard specials suitable for push on jointing as per IS : 9523: Above 600 mm diametre.
Details of Cost for : 1.00 Qtl
Code
Description
Unit
Quantity
MATERIALS :7683
Cost of specials
Quint
1.00
2309
Carriage of materials
tonne
0.10
LABOUR
18.024
Laying S & S or flanged C.I. special such as tees, bends, collars,
1.00
tapers and caps etc.
Add water charges @ 1% except on [A] i.e on

Rate
16280.00
77.67
186.11
Total:
16287.77

Add C.P & OH @15% except on [A] i.e on

16450.65
Cost for 1.00 Qtl
Rate per One Qtl:
Rate as per DSR-12:

Rs 19104.36
Rs 19104.40

Item Code: 18.69.1

P/L D.I. specials class K-12 suitable for jointing as per IS : 9523: Upto 600 mm diametre.

DSR-12

Page 904 of 2298

Code
7684
2309
18.024

Description

Details of Cost for : 1.00 Qtl

Unit
Quantity

MATERIALS :Cost of specials

Quint
Carriage of materials
tonne
LABOUR
Laying S & S or flanged C.I. special such as tees, bends, collars,
tapers and caps etc.

Rate

1.00
0.10

12540.00
77.67

1.00

186.11

Add water charges @ 1% except on [A] i.e on

Total:
12547.77

Add C.P & OH @15% except on [A] i.e on

12673.25
Cost for 1.00 Qtl
Rate per One Qtl:
Rate as per DSR-12:

Rs 14760.35
Rs 14760.35

Item Code: 18.69.2

P/L D.I. specials class K-12 suitable for jointing as per IS : 9523: Above 600 mm diametre.
Details of Cost for : 1.00 Qtl
Code
Description
Unit
Quantity
MATERIALS :7685
Cost of specials
Quint
1.00
2309
Carriage of materials
tonne
0.10
LABOUR
18.024
Laying S & S or flanged C.I. special such as tees, bends, collars,
1.00
tapers and caps etc.
Add water charges @ 1% except on [A] i.e on

Rate
17580.00
77.67
186.11
Total:
17587.77

Add C.P & OH @15% except on [A] i.e on

17763.65
Cost for 1.00 Qtl
Rate per One Qtl:
Rate as per DSR-12:

Rs 20614.31
Rs 20614.30

Item Code: 18.70.1

Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 100 mm diametre
pipes.
Details of Cost for : 50.00 Nos
Code
Description
Unit
Quantity
Rate
Details of cost for 50 Joints
MATERIALS :7666
Cost of rubber gasket
Each
50.00
26.00
LABOUR
0116
Fitter
Day
1.00
301.00
0117
Asstt Fitter
Day
1.00
273.00
0114
Beldar
Day
1.00
247.00
Total:
Add water charges @ 1% on
2121.00
Add C.P & OH @15% on
2142.21
Cost for 50.00 Nos
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 49.27
Rs 49.25

Page 905 of 2298

Item Code: 18.70.2

Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 150 mm diametre
pipes.
Details of Cost for : 50.00 Nos
Code
Description
Unit
Quantity
Rate
Details of cost for 50 Joints
MATERIALS :7668
Cost of rubber gasket
Each
50.00
36.00
LABOUR
0116
Fitter
Day
1.50
301.00
0117
Asstt. Fitter
Day
1.50
273.00
0114
Beldar
Day
3.00
247.00
Total:
Add water charges @ 1% on
3402.00
Add C.P & OH @15% on
3436.02
Cost for 50.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 79.03
Rs 79.05

Item Code: 18.70.3

Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 200 mm diametre
pipes.
Details of Cost for : 50.00
Code
Description
Unit
Quantity
Rate
MATERIALS :7669
Cost of rubber gasket
Each
50.00
62.00
LABOUR
0116
Fitter
Day
2.00
301.00
0117
Asstt. Fitter
Day
2.00
273.00
0114
Beldar
Day
4.00
247.00
Total:
Add water charges @ 1% on
5236.00
Add C.P & OH @15% on

Rate per [new Unit]:

Rate as per DSR-12:

5288.36
Cost for 50.00

Rs 121.63
Rs 121.65

Item Code: 18.70.4

Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 250 mm diametre
pipes.
Details of Cost for : 50.00 joint
Code
Description
Unit
Quantity
Rate
MATERIALS :
7670
Cost of rubber gasket
Each
50.00
73.00
LABOUR:
0116
Fitter
Day
2.50
301.00
0117
Asstt. Fitter
Day
2.50
273.00
0114
Beldar
Day
5.00
247.00
Total:
Add water charges @ 1% on
6320.00
Add C.P & OH @15% on
6383.20
Cost for 50.00 joint

DSR-12

Page 906 of 2298

Rate per Joint:

Rate as per DSR-12:

Rs 146.81
Rs 146.80

Item Code: 18.70.5

Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 300 mm diametre
pipes.
Details of Cost for : 50.00 joint
Code
Description
Unit
Quantity
Rate
MATERIALS :7671
Cost of rubber gasket
Each
50.00
103.00
LABOUR
0116
Fitter
Day
3.00
301.00
0117
Asstt. Fitter
Day
3.00
273.00
0114
Beldar
Day
6.00
247.00
Total:
Add water charges @ 1% on
8354.00
Add C.P & OH @15% on
8437.54
Cost for 50.00 joint
Rate per Joint:
Rate as per DSR-12:

Rs 194.06
Rs 194.05

Item Code: 18.70.6

Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 350 mm diametre
pipes.
Details of Cost for : 50.00 joint
Code
Description
Unit
Quantity
Rate
MATERIALS :7672
Cost of rubber gasket
Each
50.00
127.00
LABOUR
0116
Fitter
Day
3.00
301.00
0117
Asstt. Fitter
Day
3.00
273.00
0114
Beldar
Day
6.00
247.00
Total:
Add water charges @ 1% on
9554.00
Add C.P & OH @15% on
9649.54
Cost for 50.00 joint
Rate per Joint:
Rate as per DSR-12:

Rs 221.94
Rs 221.95

Item Code: 18.70.7

Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 400 mm diametre
pipes.
Details of Cost for : 50.00 joint
Code
Description
Unit
Quantity
Rate
MATERIALS :7673
Cost of rubber gasket
Each
50.00
234.00
LABOUR
0116
Fitter
Day
4.00
301.00
0117
Asstt. Fitter
Day
4.00
273.00
0114
Beldar
Day
8.00
247.00
Total:
Add water charges @ 1% on
15972.00

DSR-12

Page 907 of 2298

Add C.P & OH @15% on

16131.72
Cost for 50.00 joint
Rate per Joint:
Rate as per DSR-12:

Rs 371.03
Rs 317.05

Item Code: 18.70.8

Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 450 mm diametre
pipes.
Details of Cost for : 50.00 joint
Code
Description
Unit
Quantity
Rate
MATERIALS :7674
Cost of rubber gasket
Each
50.00
260.00
LABOUR
0116
Fitter
Day
4.50
301.00
0117
Asstt. Fitter
Day
4.50
273.00
0114
Beldar
Day
9.00
247.00
Total:
Add water charges @ 1% on
17806.00
Add C.P & OH @15% on
17984.06
Cost for 50.00 joint
Rate per Joint:
Rate as per DSR-12:

Rs 413.63
Rs 413.65

Item Code: 18.70.9

Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 500 mm diametre
pipes.
Details of Cost for : 50.00 joint
Code
Description
Unit
Quantity
Rate
MATERIALS :7675
Cost of rubber gasket
Each
50.00
285.00
LABOUR
0116
Fitter
Day
4.75
301.00
0117
Asstt. Fitter
Day
4.75
273.00
0114
Beldar
Day
9.50
247.00
Total:
Add water charges @ 1% on
19323.00
Add C.P & OH @15% on
19516.23
Cost for 50.00 joint
Rate per Joint:
Rate as per DSR-12:

Rs 448.87
Rs 448.85

Item Code: 18.70.10

Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 600 mm diametre
pipes.
Details of Cost for : 50.00 joint
Code
Description
Unit
Quantity
Rate
MATERIALS :7676
Cost of rubber gasket
Each
50.00
352.00
LABOUR
0116
Fitter
Day
6.50
301.00
0117
Asstt. Fitter
Day
6.50
273.00
0114
Beldar
Day
13.00
247.00

DSR-12

Page 908 of 2298

Add water charges @ 1% on

Total:
24542.00

Add C.P & OH @15% on

24787.42
Cost for 50.00 joint
Rate per Joint:
Rate as per DSR-12:

Rs 570.11
Rs 570.10

Item Code: 18.70.11

Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 650 mm diametre
pipes.
Details of Cost for : 50.00 joint
Code
Description
Unit
Quantity
Rate
MATERIALS :7677
Cost of rubber gasket
Each
50.00
542.00
LABOUR
0116
Fitter
Day
7.70
301.00
0117
Asstt. Fitter
Day
7.70
273.00
0114
Beldar
Day
15.40
247.00
Total:
Add water charges @ 1% on
35323.60
Add C.P & OH @15% on
35676.84
Cost for 50.00 joint
Rate per Joint:
Rate as per DSR-12:

Rs 820.57
Rs 820.55

Item Code: 18.70.12

Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 700 mm diametre
pipes.
Details of Cost for : 50.00 joint
Code
Description
Unit
Quantity
Rate
MATERIALS :7678
Cost of rubber gasket
Each
50.00
636.00
LABOUR
0116
Fitter
Day
7.70
301.00
0117
Asstt. Fitter
Day
7.70
273.00
0114
Beldar
Day
15.40
247.00
Total:
Add water charges @ 1% on
40023.60
Add C.P & OH @15% on
40423.84
Cost for 50.00 joint
Rate per Joint:
Rate as per DSR-12:

Rs 929.75
Rs 929.75

Item Code: 18.70.13

Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 800 mm diametre
pipes.
Details of Cost for : 50.00 joint
Code
Description
Unit
Quantity
Rate
MATERIALS :7679
Cost of rubber gasket
Each
50.00
684.00
LABOUR

DSR-12

Page 909 of 2298

0116
0117
0114

Fitter
Asstt. Fitter
Beldar

Day
Day
Day

8.50
8.50
17.00

Add water charges @ 1% on

301.00
273.00
247.00
Total:
43278.00

Add C.P & OH @15% on

43710.78
Cost for 50.00 joint
Rate per Joint:
Rate as per DSR-12:

Rs 1005.35
Rs 1005.35

Item Code: 18.70.14

Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 900 mm diametre
pipes.
Details of Cost for : 50.00 joint
Code
Description
Unit
Quantity
Rate
MATERIALS :7680
Cost of rubber gasket
Each
50.00
915.00
LABOUR
0116
Fitter
Day
10.00
301.00
0117
Asstt. Fitter
Day
10.00
273.00
0114
Beldar
Day
20.00
247.00
Total:
Add water charges @ 1% on
56430.00
Add C.P & OH @15% on
56994.30
Cost for 50.00 joint
Rate per Joint:
Rate as per DSR-12:

Rs 1310.87
Rs 1310.85

Item Code: 18.70.15

Providing push-on-joits to Centrifugally (Spun) C.I. pipes or Ductile iron pipes including the cost of rubber gasket : 1000 mm
diametre pipes.
Details of Cost for : 50.00 joint
Code
Description
Unit
Quantity
Rate
MATERIALS :7681
Cost of rubber gasket
Each
50.00
1138.00
LABOUR
0116
Fitter
Day
11.00
301.00
0117
Asstt. Fitter
Day
11.00
273.00
0114
Beldar
Day
22.00
247.00
Total:
Add water charges @ 1% on
68648.00
Add C.P & OH @15% on
69334.48
Cost for 50.00 joint
Rate per Joint:
Rate as per DSR-12:

Rs 1594.69
Rs 1594.70

Item Code: 18.71.1

Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 100 mm diametre C.I. Double
flanged Pipe.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate

DSR-12

Page 910 of 2298

7712
2319
18.023

MATERIALS:
100 mm dia. cast iron pipes double flanged
weight of 1m pipe = 27.00 kg
Weight of 5 m pipes 27.00x5 = 135.00 Kg
Cost of pipe
Carriage of pipes
LABOUR
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

5.00
5.00

1260.00
191.48

Qtl

1.35

101.71

Add water charges @ 1% except on [A] i.e on

Total:
6309.57

Add C.P & OH @15% except on [A] i.e on

6372.67
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1493.18
Rs 1493.15

Item Code: 18.71.2

Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 150 mm diametre C.I. Double
flanged Pipe.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS :150 mm dia. cast iron pipes double flanged weight of 1m pipe
= 44.10 kg
Weight of 5 m pipes 44.10x5 = 220.50 Kg
7713
Cost of pipe
Metre
5.00
1960.00
2321
Carriage of pipes
100 m
5.00
319.12
LABOUR
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
2.21
101.71
SH : Water Supply
Add water charges @ 1% except on [A] i.e on

Total:
9815.96

Add C.P & OH @15% except on [A] i.e on

9914.12
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2325.20
Rs 2325.20

Item Code: 18.71.3

Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 200 mm diametre C.I. Double
flanged Pipe.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:200 mm dia. cast iron pipes double flanged weight of 1m pipe
= 63.50 kg
Weight of 5 m pipes 63.50 0x5 = 317.50 Kg
7714
Cost of pipe
Metre
5.00
3170.00
2322
Carriage of pipes
100 m
5.00
519.11
LABOUR
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
3.18
101.71
SH : Water Supply
Total:

DSR-12

Page 911 of 2298

Add water charges @ 1% except on [A] i.e on

15875.96

Add C.P & OH @15% except on [A] i.e on

16034.72
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 3752.67
Rs 3752.65

Item Code: 18.71.4

Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 250 mm diametre C.I. Double
flanged Pipe.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS :250 mm dia. cast iron pipes double flanged weight of 1m
pipe= 85.30 kg
Weight of 5 m pipes 85.30 x5 = 426.50 Kg
7715
Cost of pipe
Metre
5.00
3730.00
2323
Carriage of pipes
100 m
5.00
737.68
LABOUR
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
4.27
101.71
SH : Water Supply
Add water charges @ 1% except on [A] i.e on

Total:
18686.88

Add C.P & OH @15% except on [A] i.e on

18873.75
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 4427.82
Rs 4427.80

Item Code: 18.71.5

Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 300 mm diametre C.I. Double
flanged Pipe.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS :300 mm dia. cast iron pipes double flanged weight of 1m
pipe= 110.00 kg
Weight of 5 m pipes 110.00x5 = 550.00 Kg
7716
Cost of pipe
Metre
5.00
4770.00
2324
Carriage of pipes
100 m
5.00
911.78
LABOUR
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
5.50
101.71
SH : Water Supply
Add water charges @ 1% except on [A] i.e on

Total:
23895.59

Add C.P & OH @15% except on [A] i.e on

24134.55
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 5662.83
Rs 5662.80

Item Code: 18.71.6

DSR-12

Page 912 of 2298

Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 350 mm diametre C.I. Double
flanged Pipe.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
Details of cost for 5 metre
Materials :350 mm dia. cast iron pipes double flanged
weight of 1m pipe = 135.70 kg
Weight of 5 m pipes 135.70x5 = 678.50 Kg
7717
Cost of pipe
Metre
5.00
6080.00
2325
Carraige of Spun iron S & S pipes 350 mm dia
100 m
5.00
1276.50
Labour
S&fcS
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
6.79
101.71
SH : Water Supply
Add water charges @ 1% except on [A] i.e on

Total:
30463.83

Add C.P & OH @15% except on [A] i.e on

30768.47
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 7214.87
Rs 7214.85

Item Code: 18.71.7

Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 400 mm diametre C.I. Double
flanged Pipe.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS :400 mm dia. cast iron pipes double flanged weight of 1m pipe
= 166.80kg
Weight of 5 m pipes 166.80x5 = 834.00 Kg
7718
Cost of pipe
Metre
5.00
7890.00
2326
Carriage of pipes
100 m
5.00
1740.68
LABOUR
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
8.34
101.71

Add water charges @ 1% except on [A] i.e on

Total:
39537.03

Add C.P & OH @15% except on [A] i.e on

39932.40
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 9354.10
Rs 9354.10

Item Code: 18.71.8

Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 450 mm diametre C.I. Double
flanged Pipe.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS :450 mm dia. cast iron pipes double flanged weight of 1m
pipe= 201.600 kg
Weight of 5 m pipes 201.600x5 = 1008.00 Kg
7719
Cost of pipe
Metre
5.00
9940.00

DSR-12

Page 913 of 2298

2327
18.023

Carriage of pipes
LABOUR
Laying centrifugally cast (spun) iron S & S or flanged pipes.

100 m

5.00

2127.50

10.08

101.71

Add water charges @ 1% except on [A] i.e on

Total:
49806.38

SH : Water Supply

Add C.P & OH @15% except on [A] i.e on

50304.44
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 11775.07
Rs 11775.05

Item Code: 18.71.9

Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 500 mm diametre C.I. Double
flanged Pipe.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS :500 mm dia. cast iron pipes double flanged weight of 1m
pipe= 234.80 kg
Weight of 5 m pipes 234.80x5 = 1174.00 Kg
7720
Cost of pipe
Metre
5.00
12390.00
2328
Carriage of pipes
100 m
5.00
2127.50
LABOUR
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
11.74
101.71
SH : Water Supply
Add water charges @ 1% except on [A] i.e on

Total:
62056.38

Add C.P & OH @15% except on [A] i.e on

62676.94
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 14654.51
Rs 14654.50

Item Code: 18.71.10

Providing laying double flanged (Screwed/welded) Centrifugally (Spun) C.I. pipes class B (IS : 1536): 600 mm diametre C.I. Double
flanged Pipe.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS :600 mm dia. cast iron pipes double flanged weight of 1m
pipe= 315.30kg
Weight of 5 m pipes 315.30x5 = 1576.50 Kg
7721
Cost of pipe
Metre
5.00
15330.00
2329
Carriage of pipes
100 m
5.00
3191.25
LABOUR FOR LAYING
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
15.77
101.71
Water Supply
Add water charges @ 1% except on [A] i.e on

Total:
76809.56

Add C.P & OH @15% except on [A] i.e on

77577.66
Cost for 5.00 m

DSR-12

Page 914 of 2298

Rate per One Metre:

Rate as per DSR-12:

Rs 18163.66
Rs 18163.60

Item Code: 18.72.1

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 100 mm diametre Ductile iron Class K - 7 pipes.

Code

7722
2343
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :100mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe= 15.39 kg
Weight of 10m pipes 15.39x10= 153.90 Kg
Cost of pipe
Carriage of pipes
Labour for laying
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

708.00
191.48

1.54

101.71

Add water charges @ 1% except on [A] i.e on

Total:
7099.15

Add C.P & OH @15% except on [A] i.e on

7170.14
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 840.23
Rs 840.25

Item Code: 18.72.2

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 150 mm diametre Ductile iron Class K - 7 pipes.

Code

7723
2344
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :150 mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe= 22.750kg
Weight of 10m pipes 22.750x 10 = 227.50 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

1035.00
319.12

2.28

101.71

Add water charges @ 1% except on [A] i.e on

Total:
10381.91

Add C.P & OH @15% except on [A] i.e on

10485.73
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1229.05
Rs 1229.05

Item Code: 18.72.3

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 200 mm diametre Ductile iron Class K - 7 pipes.

Code

Description

Details of Cost for : 10.00 m

Unit
Quantity

Rate

MATERIALS :200 mm dia. cast iron pipes (in 5.5 m lengths)

DSR-12

Page 915 of 2298

7724
2345
18.023

Weight of 1m pipe= 30.090 kg

Weight of 10m pipes 30.090x10 = 300.90 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

10.00
10.00

1415.00
519.11

3.01

101.71

Add water charges @ 1% except on [A] i.e on

Total:
14201.91

Add C.P & OH @15% except on [A] i.e on

14343.93
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1680.17
Rs 1680.15

Item Code: 18.72.4

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 250 mm diametre Ductile iron Class K - 7 pipes.

Code

7725
2346
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :250mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe= 39.310kg
Weight of 10m pipes 39.310x10 = 393.10 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

1920.00
737.68

3.93

101.71

Add water charges @ 1% except on [A] i.e on

Total:
19273.77

Add C.P & OH @15% except on [A] i.e on

19466.51
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2278.62
Rs 2278.60

Item Code: 18.72.5

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 300 mm diametre Ductile iron Class K - 7 pipes.

Code

7726
2347
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :300mm dia. cast iron pfpes (in 5.5 m lengths)
Weight of 1m pipe =48.400kg
Weight of 10m pipes 48.400x10 = 484.00 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

2638.00
911.78

4.84

101.71

Add water charges @ 1% except on [A] i.e on

Total:
26471.18

Add C.P & OH @15% except on [A] i.e on

26735.89
Cost for 10.00 m

DSR-12

Page 916 of 2298

Rate per One Metre:

Rate as per DSR-12:

Rs 3123.86
Rs 3123.85

Item Code: 18.72.6

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 350 mm diametre Ductile iron Class K - 7 pipes.

Code

7727
2348
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :350mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe= 66.020kg
Weight of 10m pipes 66.020x10 = 660.20 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

3135.00
1276.50

6.60

101.71

Add water charges @ 1% except on [A] i.e on

Total:
31477.65

Add C.P & OH @15% except on [A] i.e on

31792.43
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 3723.26
Rs 3723.25

Item Code: 18.72.7

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 400 mm diametre Ductile iron Class K - 7 pipes.

Code

7728
2349
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :400mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 10m pipes 78.280x10 = 782.80 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

3714.00
1740.68

7.83

101.71

Add water charges @ 1% except on [A] i.e on

Total:
37314.07

Add C.P & OH @15% except on [A] i.e on

37687.21
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 4413.67
Rs 4413.65

Item Code: 18.72.8

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 450 mm diametre Ductile iron Class K - 7 pipes.

Code

Description

Details of Cost for : 10.00 m

Unit
Quantity

Rate

MATERIALS :450mm dia. cast iron pipes (in 5.5 m lengths)

Weight of 1m pipe= 91.410kg

DSR-12

Page 917 of 2298

7729
2350
18.023

Weight of 10m pipes 91.410x10 = 914.10 Kg

Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

10.00
10.00

4411.00
2127.50

9.14

101.71

Add water charges @ 1% except on [A] i.e on

Total:
44322.75

Add C.P & OH @15% except on [A] i.e on

44765.98
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 5241.05
Rs 5241.05

Item Code: 18.72.9

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 500 mm diametre Ductile iron Class K - 7 pipes.

Code

7730
2351
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :500mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe = 106.640 kg
Weight of 10m pipes 106.640x10 = 1066.40
Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

5214.00
2127.50

10.66

101.71

Add water charges @ 1% except on [A] i.e on

Total:
52352.75

Add C.P & OH @15% except on [A] i.e on

52876.28
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 6189.20
Rs 6189.20

Item Code: 18.72.10

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 600 mm diametre Ductile iron Class K - 7 pipes.

Code

7731
2352
18.023

DSR-12

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :600mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe=138.610kg
Weight of 10m pipes 138.610x10= 1386.10
Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

metre
100 m

Rate

10.00
10.00

6801.00
3191.25

13.86

101.71

Add water charges @ 1% except on [A] i.e on

Total:
68329.13

Add C.P & OH @15% except on [A] i.e on

69012.42

Page 918 of 2298

Cost for 10.00 m

Rate per One Metre:
Rate as per DSR-12:

Rs 8077.40
Rs 8077.40

Item Code: 18.72.11

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 700 mm diametre Ductile iron Class K - 7 pipes.

Code

7732
2353
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :700mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe=188.920 kg
Weight of 10m pipes 188.920x 10 = 1889.20 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

8739.00
3191.25

18.89

101.71

Add water charges @ 1% except on [A] i.e on

Total:
87709.13

Add C.P & OH @15% except on [A] i.e on

88586.22
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 10379.55
Rs 10379.50

Item Code: 18.72.12

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 800 mm diametre Ductile iron Class K - 7 pipes.

Code

7733
2355
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :800mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe= 243.510kg
Weight of 10m pipes 243.510x10 = 2435.10 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

11156.00
3191.25

24.35

101.71

Add water charges @ 1% except on [A] i.e on

Total:
111879.13

Add C.P & OH @15% except on [A] i.e on

112997.92
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 13242.43
Rs 13242.40

Item Code: 18.72.13

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 900 mm diametre Ductile iron Class K - 7 pipes.

Code

Description

Details of Cost for : 10.00 m

Unit
Quantity

Rate

MATERIALS:-

DSR-12

Page 919 of 2298

7734
2356
18.023

900 mm dia. cast iron pipes (in 5.5 m lengths)

Weight of 1m pipe= 282.74 kg
Weight of 10m pipes 282.74x10 = 2827.40 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

metre
100 m

10.00
10.00

14617.00
4786.87

28.27

101.71

Add water charges @ 1% except on [A] i.e on

Total:
146648.69

Add C.P & OH @15% except on [A] i.e on

148115.18
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 17320.78
Rs 17320.75

Item Code: 18.72.14

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 100mm diametre Ductile iron Class K - 7 pipes.

Code

7735
2357
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :1000 mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe= 348.230kg
Weight of 10m pipes 348.230x 10 = 3482.30 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

metre
100 m

Rate

10.00
10.00

15485.00
6382.50

34.82

101.71

Add water charges @ 1% except on [A] i.e on

Total:
155488.25

Add C.P & OH @15% except on [A] i.e on

157043.13
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 18414.11
Rs 18414.10

Item Code: 18.72.15

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 100 mm diametre Ductile iron Class K - 9 pipes.

Code

7651
2319
18.023

DSR-12

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :100mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe= 17.760Kg
Weight of 10m pipes 17.760x 10=177.60 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

797.00
191.48

1.776

101.71

Add water charges @ 1% except on [A] i.e on

Total:
7989.15

Add C.P & OH @15% except on [A] i.e on

8069.04

Page 920 of 2298

Cost for 10.00 m

Rate per One Metre:
Rate as per DSR-12:

Rs 946.00
Rs 946.00

Item Code: 18.72.16

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 150 mm diametre Ductile iron Class K - 9 pipes.

Code

7652
2321
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :150 mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe =26.27Kg
Weight of 10m pipes 26.270x10 = 262.70 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

1170.00
319.12

2.627

101.71

Add water charges @ 1% except on [A] i.e on

Total:
11731.91

Add C.P & OH @15% except on [A] i.e on

11849.23
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1389.38
Rs 1389.40

Item Code: 18.72.17

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 200 mm diametre Ductile iron Class K - 9 pipes.

Code

7653
2322
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :200 mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe= 36.150Kg
Weight of 10m pipes 36.150x 10 = 361.50 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

1595.00
519.11

3.615

101.71

Add water charges @ 1% except on [A] i.e on

Total:
16001.91

Add C.P & OH @15% except on [A] i.e on

16161.93
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1895.39
Rs 1895.40

Item Code: 18.72.18

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 250 mm diametre Ductile iron Class K - 9 pipes.

Code

Description

Details of Cost for : 10.00 m

Unit
Quantity

Rate

MATERIALS :-

DSR-12

Page 921 of 2298

7654
2323
18.023

250mm dia. cast iron pipes (in 5.5 m lengths)

Weight of 1m pipe = 48.00 Kg
Weight of 10m pipes 48.000x10 = 480.00 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

10.00
10.00

2105.00
737.68

4.80

101.71

Add water charges @ 1% except on [A] i.e on

Total:
21123.77

Add C.P & OH @15% except on [A] i.e on

21335.01
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2502.35
Rs 2502.35

Item Code: 18.72.19

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 300 mm diametre Ductile iron Class K - 9 pipes.

Code

7655
2324
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :300mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe= 60.490 Kg
Weight of 10m pipes 60.490x10 = 604.90 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

2680.00
911.78

6.049

101.71

Add water charges @ 1% except on [A] i.e on

Total:
26891.18

Add C.P & OH @15% except on [A] i.e on

27160.09
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 3184.93
Rs 3184.95

Item Code: 18.72.20

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 350 mm dia Ductile Iron Class K-9 pipes

Code

Details of Cost for : 10.00 m

Unit
Quantity

Description

Rate

MATERIALS:
350mm dia cast iron pipes (in 5.5m lengths)
Weight of im pipe = 79.730 kg
Weight of 10m pipes = 79.730 x 10 = 797.30 kg
7656
2325
18.023

DSR-12

Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350mm Metre

dia
Carraige of Spun iron S & S pipes 350 mm dia
100 m
Labour for Laying
Laying centrifugally cast (spun) iron S & S or flanged pipes.
Qtl

10.00

3225.00

10.00

1276.50

7.973

101.71

Add water charges @ 1% except on [A] i.e on

Total:
32377.65

Page 922 of 2298

Add C.P & OH @15% except on [A] i.e on

32701.43
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 3841.76
Rs 3841.75

Item Code: 18.72.21

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 400 mm diametre Ductile iron Class K - 9 pipes.

Code

7657
2326
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :400mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe =94.800 Kg
Weight of 10m pipes 94.800x10 = 948.00 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

4350.00
1740.68

9.48

101.71

Add water charges @ 1% except on [A] i.e on

Total:
43674.07

Add C.P & OH @15% except on [A] i.e on

44110.81
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 5169.16
Rs 5169.15

Item Code: 18.72.22

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 450 mm diametre Ductile iron Class K - 9 pipes.

Code

7658
2327
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :450mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe= 110.970Kg
Weight of 10m pipes 110.970x 10 = 1109.70 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

5085.00
2127.50

11.097

101.71

Add water charges @ 1% except on [A] i.e on

Total:
51062.75

Add C.P & OH @15% except on [A] i.e on

51573.38
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 6043.81
Rs 6043.80

Item Code: 18.72.23

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 500 mm diametre Ductile iron Class K - 9 pipes.
Details of Cost for : 10.00 m

DSR-12

Page 923 of 2298

Code

7659
2328
18.023

Description
MATERIALS :500mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe =129.480Kg
Weight of 10m pipes 129.480x10= 1294.80 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Unit

Quantity

Rate

10.00
10.00

6180.00
2127.50

12.948

101.71

Add water charges @ 1% except on [A] i.e on

Total:
62012.75

Metre
100 m

Add C.P & OH @15% except on [A] i.e on

62632.88
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 7334.48
Rs 7334.45

Item Code: 18.72.24

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 600 mm diametre Ductile iron Class K - 9 pipes.

Code

7660
2329
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS:600mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe= 168.680 Kg
Weight of 10m pipes 168.680x10= 1686.80 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

7430.00
3191.25

16.868

101.71

Add water charges @ 1% except on [A] i.e on

Total:
74619.13

Add C.P & OH @15% except on [A] i.e on

75365.32
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 8838.58
Rs 8838.45

Item Code: 18.72.25

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 700 mm diametre Ductile iron Class K - 9 pipes.

Code

7661
2330
18.023

DSR-12

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :700mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe= 217.540 Kg
Weight of 10m pipes 217.540x10 = 2175.40 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

10050.00
2127.50

21.754

101.71

Add water charges @ 1% except on [A] i.e on

Total:
100712.75

Page 924 of 2298

Add C.P & OH @15% except on [A] i.e on

101719.88
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 11919.05
Rs 11919.00

Item Code: 18.72.26

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 700 mm diametre Ductile iron Class K - 9 pipes.

Code

7662
2331
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :750mm dia. cast iron pipes (in 5.5 m lengths)
Wt. of 1 m pipe = 242.60 Kg.
Weight of 10m pipes 242.60x10 = 2426.00 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

11350.00
4786.87

24.26

101.71

Add water charges @ 1% except on [A] i.e on

Total:
113978.69

Add C.P & OH @15% except on [A] i.e on

115118.48
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 13485.37
Rs 13485.35

Item Code: 18.72.27

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 800 mm diametre Ductile iron Class K - 9 pipes.

Code

7663
2332
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :800 mm dia. cast iron pfpes (in 5.5 m lengths)
Weight of 1m pipe= 267.100 Kg
Weight of 10m pipes 267.100x10 = 2671.00 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

11990.00
6382.50

26.71

101.71

Add water charges @ 1% except on [A] i.e on

Total:
120538.25

Add C.P & OH @15% except on [A] i.e on

121743.63
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 14272.18
Rs 14272.15

Item Code: 18.72.28

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 900 mm diametre Ductile iron Class K - 9 pipes.
Details of Cost for : 10.00 m

DSR-12

Page 925 of 2298

Code

7664
2333
18.023

Description
MATERIALS :
900 mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe =321.290 Kg
Weight of 10m pipes 321.290x10 = 3212.90 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Unit

Quantity

Rate

10.00
10.00

14030.00
6382.50

32.129

101.71

Add water charges @ 1% except on [A] i.e on

Total:
140938.25

Metre
100 m

Add C.P & OH @15% except on [A] i.e on

142347.63
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 16696.76
Rs 16696.70

Item Code: 18.72.29

P/L S&S Centrifugally Cast (Spun) Ductile Iron pipes conforming to IS : 8329: 100mm diametre Ductile iron Class K - 9 pipes.

Code

7665
2334
18.023

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS :1000 mm dia. cast irori pipes (in 5.5 m lengths)
Weight of 1m pipe = 380.190 kg
Weight of 10m pipes 380.190x10 = 3801.90 Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Metre
100 m

Rate

10.00
10.00

15750.00
6382.80

38.019

101.71

Add water charges @ 1% except on [A] i.e on

Total:
158138.28

Add C.P & OH @15% except on [A] i.e on

159719.66
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 18754.45
Rs 18754.40

Item Code: 18.73.1

Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 100 mm diametre
Ductile iron Double flanged.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS :100 mm dia. ductile iron pipes double flanged
Weight of 1m pipe = 21.700 kg
Weight of 10m pipes 21.700x5 = 108.50 Kg
7686
Cost of pipe
Metre
5.00
2025.00
2319
Carriage of pipes
100 m
5.00
191.48
LABOUR FOR LAYING
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
1.09
101.71

Add water charges @ 1% except on [A] i.e on

DSR-12

Total:
10134.57

Page 926 of 2298

Add C.P & OH @15% except on [A] i.e on

10235.92
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2376.43
Rs 2376.45

Item Code: 18.73.2

Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 150 mm diametre
Ductile iron Double flanged.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS :150 mm dia. ductile iron pipes double flanged
Weight of 1m pipe = 32.600 kg
Weight of 5m pipes32.600x5 = 163.00Kg
7687
Cost of pipe
metre
5.00
2825.00
2321
Carriage of pipes
100 m
5.00
319.12
LABOUR FOR LAYING
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
1.63
101.71

Add water charges @ 1% except on [A] i.e on

Total:
14140.96

Add C.P & OH @15% except on [A] i.e on

14282.37
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 3318.10
Rs 3318.10

Item Code: 18.73.3

Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 200 mm diametre
Ductile iron Double flanged.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS :200mm dia. ductile iron pipes double flanged
Weight of 1m pipe = 44.200 kg
Weight of 5m pipes44.200x5 =221.00Kg
7688
Cost of pipe
Metre
5.00
3740.00
2322
Carriage of pipes
100 m
5.00
519.11
LABOUR FOR LAYING
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
2.21
101.71

Add water charges @ 1% except on [A] i.e on

Total:
18725.96

Add C.P & OH @15% except on [A] i.e on

18913.22
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 4395.00
Rs 4395.00

Item Code: 18.73.4

Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 250 mm diametre
Ductile iron Double flanged.
Details of Cost for : 5.00 m

DSR-12

Page 927 of 2298

Code

7689
2323
18.023

Description
MATERIALS :250 mm dia. ductile iron pipes double flanged
Weight of 1m pipe =59.400kg
Weight of 5m pipes 59.400x5 = 297.00Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Unit

Quantity

Rate

5.00
5.00

4935.00
737.68

2.97

101.71

Add water charges @ 1% except on [A] i.e on

Total:
24711.88

Metre
100 m

Add C.P & OH @15% except on [A] i.e on

24959.00
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 5800.99
Rs 5801.00

Item Code: 18.73.5

Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 300 mm diametre
Ductile iron Double flanged.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS :300 mm dia. ductile iron pipes double flanged
Weight of 1m pipe =76.400kg
Weight of 5m pipes 76.400x5 = 382.00Kg
7690
Cost of pipe
metre
5.00
6330.00
2324
Carriage of pipes
100 m
5.00
911.78
LABOUR FOR LAYING
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
3.82
101.71

Add water charges @ 1% except on [A] i.e on

Total:
31695.59

Add C.P & OH @15% except on [A] i.e on

32012.55
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 7440.59
Rs 7440.60

Item Code: 18.73.6

Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 350 mm diametre
Ductile iron Double flanged.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS :350 mm dia. ductile iron pipes double flanged
Weight of 1m pipe =91.400kg
Weight of 5m pipes 91.400x5 = 457.00Kg
7691
Cost of pipe
Metre
5.00
8020.00
2325
Carriage of pipes
100 m
5.00
1276.50
LABOUR FOR LAYING
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
4.57
101.71

Add water charges @ 1% except on [A] i.e on

DSR-12

Total:
40163.83

Page 928 of 2298

Add C.P & OH @15% except on [A] i.e on

40565.47
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 9423.02
Rs 9423.00

Item Code: 18.73.7

Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 400 mm diametre
Ductile iron Double flanged.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS :400 mm dia. ductile iron pipes double flanged
Weight of 1m pipe =108.100kg
Weight of 5m pipes 108.100x5 = 540.50Kg
7692
Cost of pipe
Metre
5.00
9645.00
2326
Carriage of pipes
100 m
5.00
1740.68
LABOUR FOR LAYING
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
5.40
101.71

Add water charges @ 1% except on [A] i.e on

Total:
48312.03

Add C.P & OH @15% except on [A] i.e on

48795.15
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 11332.73
Rs 11332.70

Item Code: 18.73.8

Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 450 mm diametre
Ductile iron Double flanged.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS :450 mm dia. ductile iron pipes double flanged
Weight of 1m pipe =127.800kg
Weight of 5m pipes 127.800x5 = 639.00Kg
7693
Cost of pipe
Metre
5.00
11675.00
2327
Carriage of pipes
100 m
5.00
2127.50
LABOUR FOR LAYING
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
6.39
101.71

Add water charges @ 1% except on [A] i.e on

Total:
58481.38

Add C.P & OH @15% except on [A] i.e on

59066.19
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 13715.21
Rs 13715.20

Item Code: 18.73.9

Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 500 mm diametre
Ductile iron Double flanged.
Details of Cost for : 5.00 m

DSR-12

Page 929 of 2298

Code

7694
2328
18.023

Description
MATERIALS :500 mm dia. ductile iron pipes double flanged
Weight of 1m pipe =147.900kg
Weight of 5m pipes 147.900x5 = 739.50Kg
Cost of pipe
Carriage of pipes
LABOUR FOR LAYING
Laying centrifugally cast (spun) iron S & S or flanged pipes.

Unit

Quantity

Rate

5.00
5.00

13895.00
2127.50

7.40

101.71

Add water charges @ 1% except on [A] i.e on

Total:
69581.38

Metre
100 m

Add C.P & OH @15% except on [A] i.e on

70277.19
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 16314.28
Rs 16314.30

Item Code: 18.73.10

Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 600 mm diametre
Ductile iron Double flanged.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS :600 mm dia. ductile iron pipes double flanged
Weight of 1m pipe =198.900kg
Weight of 5m pipes 198.900x5 = 994.50Kg
7695
Cost of pipe
Metre
5.00
18760.00
2329
Carriage of pipes
100 m
5.00
3191.25
LABOUR FOR LAYING
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
9.95
101.71

Add water charges @ 1% except on [A] i.e on

Total:
93959.56

Add C.P & OH @15% except on [A] i.e on

94899.16
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 22029.21
Rs 22029.20

Item Code: 18.73.11

Providing laying double flan- ged (Screwed/welded) Centrif- ugally (Spun) Ductile iron pipes class -9 IS : 8329: 700 mm diametre
Ductile iron Double flanged.
Details of Cost for : 5.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS :700 mm dia. ductile iron pipes double flanged
Weight of 1m pipe =254.90 kg
Weight of 5m pipes 254.90x5 = 1274.50 Kg
7696
Cost of pipe
Metre
5.00
23275.00
2330
Carriage of pipes
100 m
5.00
2127.50
LABOUR FOR LAYING
18.023
Laying centrifugally cast (spun) iron S & S or flanged pipes.
12.75
101.71

Add water charges @ 1% except on [A] i.e on

DSR-12

Total:
116481.38

Page 930 of 2298

Add C.P & OH @15% except on [A] i.e on

117646.19
Cost for 5.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 27317.98
Rs 27318.00

Item Code: 18.74.1

P/F unplasticised P.V.C. connection pipe- of app.quality and colour. 15 mm nominal bore with 30cm length.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
7862
15 mm nominal bore and 30cm len
each
1.00
9999
Carriage of material and fixing changes
L.S.
12.22
Add water charges @ 1% on

Rate
33.00
1.49
Total:
51.21

Add C.P & OH @15% on

51.72
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 59.48
Rs 59.50

Item Code: 18.74.2

P/F unplasticised P.V.C. connection pipeof app. quality and colour. 15 mm nominal bore with 45 cm length
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
7863
15 mm nominal bore and 45 cm length PVC connection pipe each
1.00
with P.T.M.T. Nuts
9999
Carriage of material and fixing changes
L.S.
13.52
Add water charges @ 1% on

Rate
38.00

1.49
Total:
58.14

Add C.P & OH @15% on

58.72
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 67.53
Rs 67.55

Item Code: 18.75.1

P/F PTMT extn nipple for water tank pipe, fittings- 15 mm nominal bore. Weighing not less than 32 gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
7864
PTMT extension nipple 15 mm
each
1.00
9999
Carriage of material and fixing changes
L.S.
3.38
Add water charges @ 1% on

Rate
32.00
1.49
Total:
37.04

Add C.P & OH @15% on

37.41
Cost for 1.00 No.
Rate per Each:

DSR-12

Rs 43.02

Page 931 of 2298

Rate as per DSR-12:

Rs 43.00

Item Code: 18.75.2

P/F PTMT extn nipple for water tank pipe- 20mm nominal bore. Weighing not less than 40gms.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS:
7865
PTMT extension nipple 20 mm
each
1.00
9999
Carriage of material and fixing changes
L.S.
3.38
Add water charges @ 1% on

Rate
38.00
1.49
Total:
43.04

Add C.P & OH @15% on

43.47
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 49.99
Rs 50.00

Item Code: 18.75.3

P/F P.T.M.T extesion nipple for water tank pipe, fitt- ings of approved quality: 25 mm n/b weighing not less than 62 grams.

Code
7866
9999

Description
MATERIALS :
P.T.M.T extension nipple 25mm
Carriage of materials and fixing charges

Details of Cost for : 1.00 No.

Unit
Quantity
each
L.S.

1.00
3.38

Add water charges @ 1% on

Rate
57.00
1.49
Total:
62.04

Add C.P & OH @15% on

62.66
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 72.06
Rs 72.05

Item Code: 18.76.1

Cutting holes upto 30x30cm in walls, making good the same With FPS bricks.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Details of cost for 10 holes
Size 30x30 cm in 34 cm wall
Labour for cutting holes
0123
(A) Mason 1st class
Day
0.16
0124
(A) Mason 2nd class
Day
0.16
0114
(A) Beldar
Day
1.25
Brick work with bricks of class designation 75
in cement mortar 1:4(1 cement: 4 coarse
sand)
10x0.30x0.30x0.344m = 0.309 cum
Les 33% for pipe etc. = (-) 0.102 cum
= 0.207 cum Say 0.21 cum
06.004.01 Brick work with FPS bricks of class designation 75 in super
0.21
structure above plinth level u
12 mm cement plaster 1:4 (1 cement: 4 coarse
sand)
10x2x0.3x0.3m = 1.80 sqm

DSR-12

Rate

301.00
273.00
247.00

4067.84

Page 932 of 2298

13.004.01

Les 33% for pipe etc. = (-) 0.59 sqm

= 1.21 sqm Say 1.20 sqm
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

9999
9999

Finishing)
(B) Add for delay
(B) Sundries

L.S.
L.S.

1.20

132.11

16.12
8.06

1.49
1.49
Total:
436.62

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

440.99
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 151.99
Rs 152.00

Item Code: 18.77

Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc.-including finishing complete so as to make it leak
proof.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Rate
Labour for cutting holes
0123
(A) Mason 1st class
Day
0.83
301.00
0124
(A) Mason 2nd class
Day
0.83
273.00
0114
(A) Beldar
Day
1.67
247.00
Cement concrete 1:2:4 (1 cement: 2 coarse sand ; 4 graded
stone aggregate 20 mm nominal size)
10x0.15x0.15x0.15 m = 0.033 cum
Les 33% for pipe etc. = (-) 0.011 cum
= 0.022 cum Say 0.0.02 cum
04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.02
4514.03
Coarse sand, 20mmstone a
9999
(B) Finishing top and bottom and making the holes leak proof L.S.
121.16
1.49
9999
9999

(B) Add for delay

(B) Sundries

L.S.
L.S.

40.30
21.58

Add water charges @ 1% except on [A] i.e on

1.49
1.49
Total:
1161.64

Add C.P & OH @15% except on [A] i.e on

1173.26
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 143.95
Rs 143.95

Item Code: 18.78

Making chases up to 7.5x7.5 cm in walls i.. after housing G.I. pipe etc.

DSR-12

Code

Description
Labour for making chases

0123
0124
0114

Mason I class
Mason II class
Beldar
Cement concrete 1:3:6 (1 cement: 3 coarse
sand : 6 graded stone aggregate 20 mm
nominal size)
0.075x0.075x10 m = 0.05625 cum

Details of Cost for : 10.00 m

Unit
Quantity

Day
Day
Day

0.25
0.25
1.00

Rate

301.00
273.00
247.00

Page 933 of 2298

04.002.05

Les 33% for pipe etc. = (-) 0.01856 cum

= 0.03769 cum Say 0.04 cum
P/L CC walls, columns, string courses, coping, bed blocks, Cum
window sills etc. up to floor f

0.04

4782.36

Add water charges @ 1% except on [A] i.e on

Total:
390.50

Add C.P & OH @15% except on [A] i.e on

394.41
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 64.49
Rs 63.60

Item Code: 18.79

Making hole upto 20x20cm, embedding pipes upto 150 mm dia in masonary
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size)
04.002.05 P/L CC walls, columns, string courses, coping, bed blocks,
0.22
window sills etc. up to floor f
Less for pipe Pi x(0.15)^2 /4x10m=0.177 cum
= 0.223 cum Say 0.22 cum
(Rate as per item no 4.2.5 SH : Concrete work)
9999
(A) Disposal of malba
L.S.
13.52
Add water charges @ 1% except on [A] i.e on

Rate

4782.36

1.49
Total:
20.14

Add C.P & OH @15% except on [A] i.e on

20.34
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 107.55
Rs 102.80

Item Code: 18.80.1

Disinfecting CI water mains with wate r containing bleaching powder 80 mm diameter C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
MATERIAL
Bleaching powder
3x3.1416/4x(80/10)^2 x(100x100)/1000x0.5 gms.
1301
= 754.28 gms Say 0.008 q
quint
0.008
LABOUR
0116
Fitter
Day
0.33
0114
Beldar
Day
1.31
9999
Sundries including testing of samples
L.S.
9.88
Add water charges @ 1% on

Rate

1750.00
301.00
247.00
1.49
Total:
451.62

Add C.P & OH @15% on

456.14
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 524.56
Rs 524.55

Item Code: 18.80.2

Disinfecting CI water mains with wate r containing bleaching powder 100 mm diametre C.I. pipe.

DSR-12

Page 934 of 2298

Code

1301
0116
0114
9999

Description
MATERIAL
Bleaching powder
3x(3.1416/4)x(100/10)^2 x(100x100)/1000x0.5 gms.
= 1178.57 gms Say 0.012 q
LABOUR
Fitter
Beldar
Sundries including testing of samples

Details of Cost for : 100.00 m

Unit
Quantity

Rate

quint

0.012

1750.00

Day
Day
L.S.

0.49
1.64
13.52

301.00
247.00
1.49
Total:
593.71

Add water charges @ 1% on

Add C.P & OH @15% on

599.65
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 689.60
Rs 689.60

Item Code: 18.80.3

Disinfecting CI water mains with wate r containing bleaching powder 125 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
MATERIAL
Bleaching powder
3x(3.1416/4)x(125/10)^2 x(100x100)/1000x0.5 gms.
1301
= 1841.52 gms Say 0.008 q
quint
0.018
LABOUR
0116
Fitter
Day
0.66
0114
Beldar
Day
1.97
9999
Sundries including testing of samples
L.S.
17.94
Add water charges @ 1% on

Rate

1750.00
301.00
247.00
1.49
Total:
743.48

Add C.P & OH @15% on

750.91
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 863.55
Rs 863.55

Item Code: 18.80.4

Disinfecting CI water mains with wate r containing bleaching powder 150 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
MATERIAL
Bleaching powder
3x(3.1416/4)x(150/10)^2 x(100x100)/1000x0.5 gms.
1301
= 2651 gms Say 0.027 q
quint
0.027
LABOUR
0116
Fitter
Day
0.82
0114
Beldar
Day
2.30
9999
Sundries including testing of samples
L.S.
22.88
Add water charges @ 1% on

Rate

1750.00
301.00
247.00
1.49
Total:
896.26

Add C.P & OH @15% on

905.22
Cost for 100.00 m

DSR-12

Page 935 of 2298

Rate per 100 Metre:

Rate as per DSR-12:

Rs 1041.00
Rs 1041.00

Item Code: 18.80.5

Disinfecting CI water mains with wate r containing bleaching powder 200 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
MATERIAL
Bleaching powder
3x(3.1416/4)x(200/10)^2 x(100x100)/1000x0.5 gms.
1301
= 4712.39 gms Say 0.047 q
quint
0.047
LABOUR
0116
Fitter
Day
1.15
0114
Beldar
Day
2.95
9999
Sundries including testing of samples
L.S.
31.46
Add water charges @ 1% on

Rate

1750.00
301.00
247.00
1.49
Total:
1203.93

Add C.P & OH @15% on

1215.97
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 1398.37
Rs 1398.35

Item Code: 18.80.6

Disinfecting CI water mains with wate r containing bleaching powder 250 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
MATERIAL
Bleaching powder
3x(3.1416/4)x(250/10)^2 x(100x100)/1000x0.5 gms.
1301
= 7363.10 gms Say 0.074 q
quint
0.074
LABOUR
0116
Fitter
Day
1.48
0114
Beldar
Day
3.61
9999
Sundries including testing of samples
L.S.
40.30
Add water charges @ 1% on

Rate

1750.00
301.00
247.00
1.49
Total:
1526.70

Add C.P & OH @15% on

1541.97
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 1773.27
Rs 1773.25

Item Code: 18.80.7

Disinfecting CI water mains with wate r containing bleaching powder 300 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
MATERIAL
Bleaching powder
3x(3.1416/4)x(300/10)^2 x(100x100)/1000x0.5 gms.
1301
= 10602.88 gms Say 0.106 q
quint
0.106
LABOUR
0116
Fitter
Day
1.64
0114
Beldar
Day
3.94
9999
Sundries including testing of samples
L.S.
44.46

DSR-12

Rate

1750.00
301.00
247.00
1.49

Page 936 of 2298

Add water charges @ 1% on

Total:
1718.57

Add C.P & OH @15% on

1735.76
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 1996.12
Rs 1996.10

Item Code: 18.80.8

Disinfecting CI water mains with wate r containing bleaching powder 350 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
MATERIAL
Bleaching powder
3x(3.1416/4)x(350/10)^2 x(100x100)/1000x0.5 gms.
1301
= 14431.70 gms Say 0.144 q
quint
0.144
LABOUR
0116
Fitter
Day
1.80
0114
Beldar
Day
4.27
9999
Sundries including testing of samples
L.S.
48.36
Add water charges @ 1% on

Rate

1750.00
301.00
247.00
1.49
Total:
1920.55

Add C.P & OH @15% on

1939.76
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 2230.72
Rs 2230.70

Item Code: 18.80.9

Disinfecting CI water mains with wate r containing bleaching powder 400 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
MATERIAL
Bleaching powder
3x(3.1416/4)x(400/10)^2 x(100x100)/1000x0.5 gms.
1301
= 18849.60 gms Say 0.189 q
quint
0.189
LABOUR
0116
Fitter
Day
1.97
0114
Beldar
Day
4.59
9999
Sundries including testing of samples
L.S.
53.82
Add water charges @ 1% on

Rate

1750.00
301.00
247.00
1.49
Total:
2137.64

Add C.P & OH @15% on

2159.02
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 2482.87
Rs 2482.85

Item Code: 18.80.10

Disinfecting CI water mains with wate r containing bleaching powder 450 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
MATERIAL
Bleaching powder

DSR-12

Rate

Page 937 of 2298

1301
0116
0114
9999

3x(3.1416/4)x(450/10)^2 x(100x100)/1000x0.5 gms.

= 23856.50 gms Say 0.239 q
LABOUR
Fitter
Beldar
Sundries including testing of samples

quint

0.239

1750.00

Day
Day
L.S.

2.13
4.92
58.24

301.00
247.00
1.49
Total:
2361.40

Add water charges @ 1% on

Add C.P & OH @15% on

2385.01
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 2742.76
Rs 2742.75

Item Code: 18.80.11

Disinfecting CI water mains with wate r containing bleaching powder 500 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
MATERIAL
Bleaching powder
3x(3.1416/4)x(500/10)^2 x(100x100)/1000x0.5 gms.
1301
= 29452.40 gms Say 0.295 q
quint
0.295
LABOUR
0116
Fitter
Day
2.30
0114
Beldar
Day
5.25
9999
Sundries including testing of samples
L.S.
63.70
Add water charges @ 1% on

Rate

1750.00
301.00
247.00
1.49
Total:
2600.21

Add C.P & OH @15% on

2626.21
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 3020.14
Rs 3020.15

Item Code: 18.80.12

Disinfecting CI water mains with wate r containing bleaching powder 600 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
MATERIAL
Bleaching powder 3x (3.1416/4)x(600/10)^2 x
(100x100)/100x0.5gms
1301
= 42411.5 gms Say 0.424 q
quint
0.424
LABOUR
0116
Fitter
Day
2.62
0114
Beldar
Day
5.91
9999
Sundries including testing of samples
L.S.
71.37
Add water charges @ 1% on

Rate

1750.00
301.00
247.00
1.49
Total:
3096.73

Add C.P & OH @15% on

3127.70
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

DSR-12

Rs 3596.86
Rs 3596.85

Page 938 of 2298

Item Code: 18.81.1

Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of
water 80 mm diameter C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
1301
Bleaching powder
quint
0.003
1750.00
0116
Fitter
Day
0.11
301.00
0114
Beldar
Day
0.49
247.00
9999
Sundries including testing of samples
L.S.
4.42
1.49
Total:
Add water charges @ 1% on
165.98
Add C.P & OH @15% on
167.64
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 192.79
Rs 192.80

Item Code: 18.81.2

Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of
water 100 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
1301
Bleaching powder
quint
0.004
1750.00
0116
Fitter
Day
0.16
301.00
0114
Beldar
Day
0.57
247.00
9999
Sundries including testing of samples
L.S.
4.42
1.49
Total:
Add water charges @ 1% on
202.54
Add C.P & OH @15% on
204.57
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 235.26
Rs 235.25

Item Code: 18.81.3

Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of
water 125 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
1301
Bleaching powder
quint
0.006
1750.00
LABOUR:
0116
Fitter
Day
0.22
301.00
0114
Beldar
Day
0.66
247.00
9999
Sundries including testing of samples
L.S.
5.46
1.49
Total:
Add water charges @ 1% on
247.88
Add C.P & OH @15% on
250.36
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

DSR-12

Rs 287.91
Rs 287.90

Page 939 of 2298

Item Code: 18.81.4

Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of
water 150 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
1301
Bleaching powder
quint
0.009
1750.00
LABOUR:
0116
Fitter
Day
0.27
301.00
0114
Beldar
Day
0.74
247.00
9999
Sundries including testing of samples
L.S.
7.15
1.49
Total:
Add water charges @ 1% on
290.45
Add C.P & OH @15% on
293.35
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 337.35
Rs 337.35

Item Code: 18.81.5

Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of
water 200 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
1301
Bleaching powder
quint
0.016
1750.00
0116
Fitter
Day
0.58
301.00
0114
Beldar
Day
0.90
247.00
9999
Sundries including testing of samples
L.S.
9.88
1.49
Total:
Add water charges @ 1% on
439.60
Add C.P & OH @15% on
444.00
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 510.60
Rs 510.60

Item Code: 18.81.6

Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of
water 250 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
1301
Bleaching powder
quint
0.025
1750.00
LABOUR:
0116
Fitter
Day
0.60
301.00
0114
Beldar
Day
1.10
247.00
9999
Sundries including testing of samples
L.S.
10.79
1.49
Total:
Add water charges @ 1% on
512.13
Add C.P & OH @15% on
517.25
Cost for 100.00 m
Rate per 100 Metre:

DSR-12

Rs 594.84

Page 940 of 2298

Rate as per DSR-12:

Rs 594.86

Item Code: 18.81.7

Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of
water 300 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
1301
Bleaching powder
quint
0.035
1750.00
LABOUR:
0116
Fitter
Day
0.60
301.00
0114
Beldar
Day
1.30
247.00
9999
Sundries including testing of samples
L.S.
13.52
1.49
Total:
Add water charges @ 1% on
583.09
Add C.P & OH @15% on
588.92
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 677.26
Rs 677.25

Item Code: 18.81.8

Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of
water 350 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
1301
Bleaching powder
quint
0.048
1750.00
LABOUR:
0116
Fitter
Day
0.70
301.00
0114
Beldar
Day
1.50
247.00
9999
Sundries including testing of samples
L.S.
16.12
1.49
Total:
Add water charges @ 1% on
689.22
Add C.P & OH @15% on
696.11
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 800.53
Rs 800.55

Item Code: 18.81.9

Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of
water 400 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
1301
Bleaching powder
quint
0.063
1750.00
LABOUR:
0116
Fitter
Day
0.80
301.00
0114
Beldar
Day
1.70
247.00
9999
Sundries including testing of samples
L.S.
17.94
1.49
Total:
Add water charges @ 1% on
797.68
Add C.P & OH @15% on

DSR-12

805.66

Page 941 of 2298

Cost for 100.00 m

Rate per 100 Metre:
Rate as per DSR-12:

Rs 926.51
Rs 926.50

Item Code: 18.81.10

Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of
water 450 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
1301
Bleaching powder
quint
0.08
1750.00
LABOUR:
0116
Fitter
Day
0.90
301.00
0114
Beldar
Day
1.90
247.00
9999
Sundries including testing of samples
L.S.
20.67
1.49
Total:
Add water charges @ 1% on
911.00
Add C.P & OH @15% on
920.11
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 1058.13
Rs 1058.15

Item Code: 18.81.11

Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of
water 500 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
1301
Bleaching powder
quint
0.098
1750.00
LABOUR:
0116
Fitter
Day
1.00
301.00
0114
Beldar
Day
2.10
247.00
9999
Sundries including testing of samples
L.S.
23.27
1.49
Total:
Add water charges @ 1% on
1025.87
Add C.P & OH @15% on
1036.13
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 1191.55
Rs 1191.55

Item Code: 18.81.12

Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of
water 600 mm diametre C.I. pipe.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
1301
Bleaching powder
quint
0.141
1750.00
LABOUR:
0116
Fitter
Day
1.20
301.00
0114
Beldar
Day
2.50
247.00
9999
Sundries including testing of samples
L.S.
26.00
1.49
Total:

DSR-12

Page 942 of 2298

Add water charges @ 1% on

1264.19

Add C.P & OH @15% on

1276.83
Cost for 100.00 m
Rate per 100 Metre:
Rate as per DSR-12:

Rs 1468.35
Rs 1468.35

Item Code: 18.82.1

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 80 mm diameter C.I. pipe.

Code

02.008.01
02.025

0761
0771
0117
0114
9999

Details of Cost for : 40.26 m

Description
Unit
Quantity
Details of cost for 40.26 m or 11 nos. joints.
Earth work in excavationfor dismantling pipes including
refilling of excavated earth
1x40.26x55x0.75 m= 16.61 cum
Deduct for pipe 1x40.26x 3.1416/4 x(0.098)^2 m
= (-)0.30 cum . total=16.31cum
E/W excavation in foundation trenches .. .. All kinds of soil.
16.31
Filling available excavated earth (excluding rock) .. ..
Breaking lead caulked joints making blocks and stacking
MATERIALS
Fuel wood required
Kerosene oil
LABOUR
Assistant Filter
Beldar
Sundries and carriage

Rate

130.78

16.31

83.80

quint
litre

0.373
0.379

450.00
30.00

Day
Day
L.S.

0.50
4.00
53.82

273.00
247.00
1.49
Total:
1383.91

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

1397.75
Cost for 40.26 m
Rate per One Metre:
Rate as per DSR-12:

Rs 126.86
Rs 150.70

Item Code: 18.82.2

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 100 mm diametre C.I. pipe.

Code

02.008.01
02.025

0761
0771

DSR-12

Details of Cost for : 40.26 m

Description
Unit
Quantity
Earth work in excavationfor dismantling pipes including
refilling of excavated earth
1x40.26x55x0.75 m=16.61 cum
Deduct for pipe 1x40.26x 3.141`6/4 x(0.098)^2 m
= (-)0.44
E/W excavation in foundation trenches .. .. All kinds of soil.
16.17
Filling available excavated earth (excluding rock) .. ..
Breaking lead caulked joints,making blockst and stacking
MATERIALS
Fuel wood required
Kerosene oil

Rate

130.78

Cum

16.17

83.80

quint
litre

0.466
0.379

450.00
30.00

Page 943 of 2298

0117
0114
9999

LABOUR
Assistant Filter
Beldar
Sundries and carriage

Day
Day
L.S.

0.63
4.50
53.82

Add water charges @ 1% except on [A]+[B] i.e on

273.00
247.00
1.49
Total:
1584.75

Add C.P & OH @15% except on [A]+[B] i.e on

1600.60
Cost for 40.26 m
Rate per One Metre:
Rate as per DSR-12:

Rs 131.90
Rs 155.55

Item Code: 18.82.3

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 125 mm diametre C.I. pipe.

Code

02.008.01
02.025

0761
0771
0117
0114
9999

Details of Cost for : 40.26 m

Description
Unit
Quantity
Detaila of cost for 40.26 m or 11 nos. joints.
Earth work in excavationfor dismantling pipes including
refilling of excavated earth
1x40.26x55x0.75 m= 16.61 cum
Deduct for pipe 1x40.26x 3.1416/4 x(0.144)^2/4
=(-) 0.65cum total=15.96cum
E/W excavation in foundation trenches .. .. All kinds of soil.
15.96
Filling available excavated earth (excluding rock) .. ..
Breaking lead caulked joints,and stacking
MATERIALS
Fuel wood required
Kerosene oil
LABOUR
Assistant Filter
Beldar
Sundries and carriage

Rate

130.78

15.96

83.80

quint
litre

0.559
0.568

450.00
30.00

Day
Day
L.S.

0.75
5.00
53.82

273.00
247.00
1.49
Total:
1788.53

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

1806.42
Cost for 40.26 m
Rate per One Metre:
Rate as per DSR-12:

Rs 136.66
Rs 160.00

Item Code: 18.82.4

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 150 mm diametre C.I. pipe.

02.008.01

Details of Cost for : 40.26 m

Description
Unit
Quantity
Detaila of cost for 40.26 m or 11 nos. joints.
Earth work in excavationfor dismantling pipes including
refilling of excavated earth
1x40.26x55x0.75 m= 16.61 cum
Deduct for pipe 1x40.26x 3.1416/4 x (0.17)^2
=(-) 0.91 cum
E/W excavation in foundation trenches .. .. All kinds of soil.
15.70

02.025

Filling available excavated earth (excluding rock) .. ..

Code

DSR-12

15.70

Rate

130.78
83.80

Page 944 of 2298

0761
0771
0117
0114
9999

Breaking lead caulked joints,making blocks and stacking

MATERIALS
Fuel wood required
Kerosene oil
LABOUR
Assistant Filter
Beldar
Sundries and carriage

quint
litre

0.653
0.568

450.00
30.00

Day
Day
L.S.

0.887
5.50
67.21

273.00
247.00
1.49
Total:
2011.68

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

2031.80
Cost for 40.26 m
Rate per One Metre:
Rate as per DSR-12:

Rs 141.72
Rs 164.60

Item Code: 18.82.5

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 200 mm diametre C.I. pipe.

Code

02.008.01
02.025

0761
0771
0117
0114
9999

Details of Cost for : 40.26 m

Description
Unit
Quantity
Detaila of cost for 40.26 m or 11 nos. joints.
Earth work in excavationfor dismantling pipes including
refilling of excavated earth
1x40.26x60x0.75 m=18.12 cum = 16.56 cum
Deduct for pipe 1x40.26x 3.1416/4 x (0.222)^2
(-) 1.56cum Total=16.56cum
E/W excavation in foundation trenches .. .. All kinds of soil.
16.56
Filling available excavated earth (excluding rock) .. ..
Breaking lead caulked joints making block and stacking
MATERIALS
Fuel wood required
Kerosene oil
LABOUR
Assistant Filter
Beldar
Sundries and carriage

Rate

130.78

16.56

83.80

quint
litre

0.84
0.7576

450.00
30.00

Day
Day
L.S.

1.10
6.50
67.21

273.00
247.00
1.49
Total:
2406.67

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

2430.74
Cost for 40.26 m
Rate per One Metre:
Rate as per DSR-12:

Rs 157.69
Rs 181.90

Item Code: 18.82.6

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 250 mm diametre C.I. pipe.

Code

DSR-12

Details of Cost for : 40.26 m

Description
Unit
Quantity
Detaila of cost for 40.26 m or 11 nos. joints.
Earth work in excavationfor dismantling pipes including
refilling of excavated earth
1x40.26x.65x0.75m= 19.63
Deduct for pipe 1x40.26x 3.1416/4 x (0.274)^2

Rate

Page 945 of 2298

02.008.01
02.025

0761
0771
0117
0114
9999

= (-) 2.37 cum = 17.26

E/W excavation in foundation trenches .. .. All kinds of soil.

17.26

130.78

17.26

83.80

quint
litre

1.026
1.1365

450.00
30.00

Day
Day
L.S.

1.30
7.50
80.73

273.00
247.00
1.49
Total:
2823.49

Filling available excavated earth (excluding rock) .. ..

Breaking lead caulked joints, making blocks and stacking
MATERIALS
Fuel wood required
Kerosene oil
LABOUR
Assistant Filter
Beldar
Sundries and carriage

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

2851.72
Cost for 40.26 m
Rate per One Metre:
Rate as per DSR-12:

Rs 173.45
Rs 198.65

Item Code: 18.82.7

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 300 mm diametre C.I. pipe.

Code

02.008.01
02.025

0761
0771
0117
0114
9999

Description
Detaila of cost for 40.26 m or 11 nos. joints.
Earth work in excavationfor dismantling pipes
including refilling of excavated earth
1x40.26x.65x0.75m= 19.63 = 21.14 cum
Deduct for pipe 1x40.26x 3.1416/4 x (0.274)^2
= (-) 2.37 cum = 17.26 4
E/W excavation in foundation trenches .. .. All kinds of soil.
Filling available excavated earth (excluding rock) .. ..
Breaking lead caulked joints. making blocks and
stacking
MATERIALS
Fuel wood
Kerosene oil
LABOUR
Assistant Filter
Beldar
Sundries and carriage

Details of Cost for : 40.26 m

Unit
Quantity

Rate

17.79

130.78

17.79

83.80

quint
litre

1.12
1.515

450.00
30.00

Day
Day
L.S.

1.50
8.50
94.12

273.00
247.00
1.49
Total:
3198.69

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

3230.68
Cost for 40.26 m
Rate per One Metre:
Rate as per DSR-12:

Rs 187.10
Rs 213.10

Item Code: 18.82.8

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 350 mm diametre C.I. pipe.
Details of Cost for : 40.26 m

DSR-12

Page 946 of 2298

Code

02.008.01
02.025

0761
0771
0117
0114
9999

Description
Unit
Details of cost for 40.26 m or 11 nos. joints.
Earth work in excavationfor dismantling pipes including
refilling of excavated earth
1x40.26x.75x0.75 m=22.65 cum
Deduct for pipe 1x40.26x 3.1416 x (0378)^2/4
= (-) 4.51cum = 18.14 cum
E/W excavation in foundation trenches .. .. All kinds of soil.
Filling available excavated earth (excluding rock) .. ..
Breaking lead caulked joints,making blocks and stacking
MATERIALS
Fuel wood required
Kerosene oil
LABOUR
Assistant Filter
Beldar
Sundries and carriage

Quantity

Rate

18.14

130.78

18.14

83.80

quint
litre

1.213
1.515

450.00
30.00

Day
Day
L.S.

1.75
9.50
107.64

273.00
247.00
1.49
Total:
3575.93

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

3611.69
Cost for 40.26 m
Rate per One Metre:
Rate as per DSR-12:

Rs 199.85
Rs 226.35

Item Code: 18.82.9

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 400 mm diametre C.I. pipe.

Code

02.008.01
02.025

0761
0771
0117
0114
9999

Description
Details of cost for 40.26 m or 11 nos. joints.
Earth work in excavationfor dismantling pipes
including refilling of excavated earth
1x40.26x.80x0.75 m=24.16 cum
Deduct for pipe 1x40.26x 3.1416 x (0.429)^2/4
= (-) 5.93cum = 18.23
E/W excavation in foundation trenches .. .. All kinds of soil.
Filling available excavated earth (excluding rock) .. ..
Breaking lead caulked jointsmaking blocks and stacking
MATERIALS
Fuel wood required
Kerosene oil
LABOUR
Assistant Filter
Beldar
Sundries and carriage

Details of Cost for : 40.26 m

Unit
Quantity

Rate

18.23

130.78

18.23

83.80

quint
litre

1.306
1.894

450.00
30.00

Day
Day
L.S.

2.00
10.50
121.03

273.00
247.00
1.49
Total:
3964.35

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

4003.99
Cost for 40.26 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 211.53
Rs 238.15

Page 947 of 2298

Item Code: 18.82.10

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 450 mm diametre C.I. pipe.

Code

02.008.01
02.025

0761
0771
0117
0114
9999

Details of Cost for : 40.26 m

Description
Unit
Quantity
Detaila of cost for 40.26 m or 11 nos. joints.
Earth work in excavationfor dismantling pipes including
refilling of excavated earth
1x40.26x.85x0.75 m=25.67 cum.
Deduct for pipe 1x40.26x 3.1416 x (0.48)^2/4
= (-) 7.29cum =18.38 cum.
E/W excavation in foundation trenches .. .. All kinds of soil.
18.38
Filling available excavated earth (excluding rock) .. ..
Breaking lead caulked joints, blocks and stacking
MATERIALS
Fuel wood required
Kerosene oil
LABOUR
Assistant Filter
Beldar
Sundries and carriage

Rate

130.78

18.38

83.80

quint
litre

1.40
2.273

450.00
30.00

Day
Day
L.S.

2.25
11.50
134.55

273.00
247.00
1.49
Total:
4353.42

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

4396.95
Cost for 40.26 m
Rate per One Metre:
Rate as per DSR-12:

Rs 223.56
Rs 250.40

Item Code: 18.82.11

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 500 mm diametre C.I. pipe.

Code

02.008.01
02.025

0761
0771
0117
0114
9999

Details of Cost for : 40.26 m

Description
Unit
Quantity
Detaila of cost for 40.26 m or 11 nos. joints.
Earth work in excavationfor dismantling pipes including
refilling of excavated earth
1x40.26x.90x0.75m=27.18cum
Deduct for pipe 1x40.26x 3.1416 x (0.532)^2/4
= (-) 8.94cum = 18.24cum
E/W excavation in foundation trenches .. .. All kinds of soil.
18.24
Filling available excavated earth (excluding rock) .. ..
Breaking lead caulked joints, blocks and stacking
MATERIALS
Fuel wood required
Kerosene oil
LABOUR
Assistant Filter
Beldar
Sundries and carriage

Rate

130.78

18.24

83.80

quint
litre

1.492
2.652

450.00
30.00

Day
Day
L.S.

2.50
12.50
147.94

273.00
247.00
1.49
Total:
4741.39

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

4788.80
Cost for 40.26 m

DSR-12

Page 948 of 2298

Rate per One Metre:

Rate as per DSR-12:

Rs 234.01
Rs 260.65

Item Code: 18.82.12

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes : 600 mm diametre C.I. pipe.

Code

02.008.01
02.025

0761
0771
0117
0114
9999

Details of Cost for : 40.26 m

Description
Unit
Quantity
Detaila of cost for 40.26 m or 11 nos. joints.
Earth work in excavationfor dismantling pipes including
refilling of excavated earth
1x40.26x1.00x0.75 m=30.20 cum
Deduct for pipe 1x40.26x 3.1416 x (0.635)
= (-) 12.76cum 17.44 cum.
E/W excavation in foundation trenches .. .. All kinds of soil.
Cum
17.44
Filling available excavated earth (excluding rock) .. ..
Breaking lead caulked joints, making blocks and stacking
MATERIALS
Fuel wood required
Kerosene oil
LABOUR
Assistant Filter
Beldar
Sundries and carriage

quint
litre
Day
Day
L.S.

Rate

130.78

17.44

83.80

1.68
3.41

450.00
30.00

3.00
14.50
174.85

273.00
247.00
1.49
Total:
5519.33

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

5574.52
Cost for 40.26 m
Rate per One Metre:
Rate as per DSR-12:

Rs 252.19
Rs 277.65

Item Code: 18.83.1

Labour for cutting C.I. pipe with steel saw : 80 mm diameter C.I. pipe.
Code

0116
0114
9999

Details of Cost for : 1.00 nos

Unit
Quantity

Description
Detail of cost for one cut.
LABOUR
Fitter
Belder
Sundries

Day
Day
L.S.

0.06
0.06
1.82

Add water charges @ 1% on

Rate

301.00
247.00
1.49
Total:
35.59

Add C.P & OH @15% on

35.95
Cost for 1.00 nos
Rate per Each Cut:
Rate as per DSR-12:

Rs 41.34
Rs 41.35

Item Code: 18.83.2

Labour for cutting C.I. pipe with steel saw : 100 mm diametre C.I. pipe.
Code

DSR-12

Description

Details of Cost for : 1.00 nos

Unit
Quantity

Rate

Page 949 of 2298

0116
0114
9999

Detail of cost for one cut.

LABOUR
Fitter.
Belder
Sundries

Day
Day
L.S.

0.08
0.08
2.73

Add water charges @ 1% on

301.00
247.00
1.49
Total:
47.91

Add C.P & OH @15% on

48.39
Cost for 1.00 nos
Rate per Each Cut:
Rate as per DSR-12:

Rs 55.65
Rs 55.65

Item Code: 18.83.3

Labour for cutting C.I. pipe with steel saw : 125 mm diametre C.I. pipe.
Code

0116
0114
9999

Details of Cost for : 1.00 nos

Unit
Quantity

Description
Detail of cost for one cut.
LABOUR
Fitter.
Belder
Sundries

Day
Day
L.S.

0.11
0.11
4.42

Add water charges @ 1% on

Rate

301.00
247.00
1.49
Total:
66.87

Add C.P & OH @15% on

67.54
Cost for 1.00 nos
Rate per Each Cut:
Rate as per DSR-12:

Rs 77.67
Rs 77.65

Item Code: 18.83.4

Labour for cutting C.I. pipe with steel saw : 150 mm diametre C.I. pipe.
Code

0116
0114
9999

Details of Cost for : 1.00 nos

Unit
Quantity

Description
Detail of cost for one cut.
LABOUR
Fitter
Belder
Sundries

Day
Day
L.S.

0.15
0.15
5.33

Add water charges @ 1% on

Rate

301.00
247.00
1.49
Total:
90.14

Add C.P & OH @15% on

91.04
Cost for 1.00 nos
Rate per Each Cut:
Rate as per DSR-12:

Rs 104.70
Rs 104.70

Item Code: 18.83.5

Labour for cutting C.I. pipe with steel saw : 200 mm diametre C.I. pipe.
Code

0116

DSR-12

Description
Detail of cost for one cut.
LABOUR
Fitter

Details of Cost for : 1.00 nos

Unit
Quantity

Day

0.20

Rate

301.00

Page 950 of 2298

0114
9999

Belder
Sundries

Day
L.S.

0.20
7.15

Add water charges @ 1% on

247.00
1.49
Total:
120.25

Add C.P & OH @15% on

121.45
Cost for 1.00 nos
Rate per Each Cut:
Rate as per DSR-12:

Rs 139.67
Rs 139.65

Item Code: 18.83.6

Labour for cutting C.I. pipe with steel saw : 250 mm diametre C.I. pipe.
Code

0116
0114
9999

Details of Cost for : 1.00 nos

Unit
Quantity

Description
Detail of cost for one cut.
LABOUR
Fitter
Belder
Sundries

Day
Day
L.S.

0.25
0.25
8.06

Add water charges @ 1% on

Rate

301.00
247.00
1.49
Total:
149.01

Add C.P & OH @15% on

150.50
Cost for 1.00 nos
Rate per Each Cut:
Rate as per DSR-12:

Rs 173.08
Rs 173.10

Item Code: 18.83.7

Labour for cutting C.I. pipe with steel saw : 300 mm diametre C.I. pipe.
Code

0116
0114
9999

Details of Cost for : 1.00 nos

Unit
Quantity

Description
Detail of cost for one cut.
LABOUR
Fitter
Belder
Sundries

Day
Day
L.S.

0.30
0.30
9.88

Add water charges @ 1% on

Rate

301.00
247.00
1.49
Total:
179.12

Add C.P & OH @15% on

180.91
Cost for 1.00 nos
Rate per Each Cut:
Rate as per DSR-12:

Rs 208.05
Rs 208.05

Item Code: 18.83.8

Labour for cutting C.I. pipe with steel saw : 350 mm diametre C.I. pipe.
Code

0116
0114
9999

DSR-12

Description
Detail of cost for one cut.
LABOUR
Fitter
Belder
Sundries

Details of Cost for : 1.00 nos

Unit
Quantity

Day
Day
L.S.

0.35
0.35
10.79

Rate

301.00
247.00
1.49
Total:

Page 951 of 2298

Add water charges @ 1% on

207.88

Add C.P & OH @15% on

209.96
Cost for 1.00 nos
Rate per Each Cut:
Rate as per DSR-12:

Rs 241.45
Rs 241.45

Item Code: 18.83.9

Labour for cutting C.I. pipe with steel saw : 400 mm diametre C.I. pipe.
Code

0116
0114
9999

Details of Cost for : 1.00 nos

Unit
Quantity

Description
Detail of cost for one cut.
LABOUR
Fitter
Belder
Sundries

Day
Day
L.S.

0.40
0.40
12.48

Add water charges @ 1% on

Rate

301.00
247.00
1.49
Total:
237.80

Add C.P & OH @15% on

240.18
Cost for 1.00 nos
Rate per Each Cut:
Rate as per DSR-12:

Rs 276.21
Rs 276.20

Item Code: 18.83.10

Labour for cutting C.I. pipe with steel saw : 450 mm diametre C.I. pipe.
Code

0116
0114
9999

Details of Cost for : 1.00 nos

Unit
Quantity

Description
Detail of cost for one cut.
LABOUR
Fitter
Belder
Sundries

Day
Day
L.S.

0.45
0.45
13.52

Add water charges @ 1% on

Rate

301.00
247.00
1.49
Total:
266.74

Add C.P & OH @15% on

269.41
Cost for 1.00 nos
Rate per Each Cut:
Rate as per DSR-12:

Rs 309.82
Rs 309.80

Item Code: 18.83.11

Labour for cutting C.I. pipe with steel saw : 500 mm diametre C.I. pipe.
Code

0116
0114
9999

DSR-12

Description
Detail of cost for one cut.
LABOUR
Fitter
Belder
Sundries

Details of Cost for : 1.00 nos

Unit
Quantity

Day
Day
L.S.

0.50
0.50
15.21

Rate

Add water charges @ 1% on

301.00
247.00
1.49
Total:
296.66

Add C.P & OH @15% on

299.63

Page 952 of 2298

Cost for 1.00 nos

Rate per Each Cut:
Rate as per DSR-12:

Rs 344.57
Rs 344.55

Item Code: 18.83.12

Labour for cutting C.I. pipe with steel saw : 600 mm diametre C.I. pipe.
Code

0116
0114
9999

Description
Detail of cost for one cut.
LABOUR
Fitter
Belder
Sundries

Details of Cost for : 1.00 nos

Unit
Quantity

Day
Day
L.S.

0.60
0.60
16.12

Add water charges @ 1% on

Rate

301.00
247.00
1.49
Total:
352.82

Add C.P & OH @15% on

356.35
Cost for 1.00 nos
Rate per Each Cut:
Rate as per DSR-12:

Rs 409.80
Rs 409.80

Item Code: 18.84.1

Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology - 15 mm
nominal bore.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
3327
15 mm Battery Based Sensor Pillar Cock
Nos
1.00
5822.50
9999
Carriage of materials and fixing charges
L.S.
8.06
1.49
Total:
Add water charges @ 1% on
5834.51
Add C.P & OH @15% on
5892.86
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 6776.79
Rs 6776.80

Item Code: 19.1.1

P/L and jointing glazed SW pipes grade 'A' CM 1:1 (1 cement : 1 fine sand) including testing of joints etc. Complete : 100 mm
diameter
Details of Cost for : 30.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
1854
(i)100 mm stone ware pipes 60 cm long
each
55.00
36.00
2224
(ii)Carriage of pipes
100 m
33.00
116.80
Added 10% allowance for breakage in items
(I) & (II)
0367
Cement of 50 joints = 0.019 tonne
tonne
0.019
5000.00
2209
Carriage of cement
tonne
0.019
77.87
0983
Fine sand
cum
0.01
640.00
2261
Carriage of fine sand
cum
0.01
87.60
1881
Spun yarn or plain gaskin @ 0.09 kg per joint
kilog
4.50
40.00
= 0.09x50 = 4.50 kg
LABOUR

DSR-12

Page 953 of 2298

0123
0124
0114
0101

Mason 1st class

Mason 2nd class
Beldar
Bhishti

Day
Day
Day
Day

1.00
1.00
3.00
1.00

Add water charges @ 1% on

301.00
273.00
247.00
260.00
Total:
3877.30

Add C.P & OH @15% on

3916.07
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 150.12
Rs 150.10

Item Code: 19.1.2

P/L and jointing glazed SW pipes grade 'A' CM 1:1 (1 cement : 1 fine sand) including testing of joints etc. Complete : 150 mm
diameter
Details of Cost for : 30.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
1855
(i) 150 mn stone.ware pipes 60 cm long
each
55.00
53.00
2225
(ii) Carriage of pipes
100 m
33.00
233.60
Added 10% allowance for breakage in items
(i) & (ii)
0367
Cement of 50 joints = 0.036 tonne
tonne
0.036
5000.00
2209
Carriage of cement
tonne
0.036
77.87
0983
Fine sand
cum
0.019
640.00
2261
Carriage of fine sand
cum
0.019
87.60
1881
Spun yarn or plain gaskin @ 0.18 kg per joint
kilog
9.00
40.00
= 0.18x50 = 9 kg
LABOUR
0123
Mason 1 st class
Day
1.50
301.00
0124
Mason 2nd class
Day
1.50
273.00
0114
Beldar
Day
4.00
247.00
0101
Bhishti
Day
1.00
260.00
Total:
Add water charges @ 1% on
5657.71
Add C.P & OH @15% on
5714.29
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 219.05
Rs 219.05

Item Code: 19.1.3

P/L and jointing glazed SW pipes grade 'A' CM 1:1 (1 cement : 1 fine sand) including testing of joints etc. Complete : 200 mm
diameter
Details of Cost for : 30.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
1856
(i) 200 mm stone ware pipes 60 cm long
each
55.00
91.00
2226
Carraige of S.W. pipes200 mm dia
100 m
33.00
389.33
Added 10% allowance for breakage in items
(i)&(ii)
0367
Cement of 50 joints = 0.053 tonne
tonne
0.053
5000.00
2209
Carriage of cement
tonne
0.053
77.87
0983
Fine sand
cum
0.028
640.00
2261
Carriage of fine sand
cum
0.028
87.60

DSR-12

Page 954 of 2298

1881

0123
0124
0114
0101

Spun yarn or plain gaskin @ 0.24 kg per joint = 0.24x50 =12.00

kg
LABOUR
Mason 1st class
Mason (brick layer) 2nd class
Beldar
Bhishti

kilog

12.00

40.00

Day
Day
Day
Day

1.75
1.75
4.50
1.25

301.00
273.00
247.00
260.00
Total:
8343.98

Add water charges @ 1% on

Add C.P & OH @15% on

8427.42
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 323.05
Rs 323.05

Item Code: 19.1.4

P/L and jointing glazed SW pipes grade 'A' CM 1:1 (1 cement : 1 fine sand) including testing of joints etc. Complete : 250 mm
diameter
Details of Cost for : 30.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
1858
Stoneware pipes grade A (60 cm long) 250 mm dia
each
55.00
130.00
Qty including 10% for breakage
2228
Carraige of S.W. pipes250 mm dia
100 m
33.00
667.43
0367
Cement of 50 joints = 0.094 tonne
tonne
0.094
5000.00
2209
Carraige of Cement
tonne
0.094
77.87
0983
Fine sand (zone IV)
cum
0.05
640.00
2261
Carraige of Fine sand (1 part badarpur sand : 2 parts jamuna cum
0.05
87.60
sand)
1881
Spun yarn or plain gaskin @ 0.30 kg per joint = 0.30x50 =15.00 kilog
15.00
40.00
kg
LABOUR
0123
Mason 1st class
Day
2.25
301.00
0124
Mason (brick layer) 2nd class
Day
2.25
273.00
0114
Beldar
Day
5.50
247.00
0101
Bhishti
Day
1.50
260.00
Total:
Add water charges @ 1% on
11523.95
Add C.P & OH @15% on
11639.19
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 446.17
Rs 446.15

Item Code: 19.1.5

P/L and jointing glazed SW pipes grade 'A' CM 1:1 (1 cement : 1 fine sand) including testing of joints etc. Complete : 250 mm
diameter
Details of Cost for : 30.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
1858
(i) 250 mm stone ware pipes 60 cm long
each
55.00
130.00
2228
(ii) Carriage of pipes
100 m
33.00
667.43
Added 10% allowance for breakage in items
(i) & (ii)
0367
Cement of 50 joints = 0.094 tonne
tonne
0.094
5000.00
2209
Carriage of cement
tonne
0.094
77.87

DSR-12

Page 955 of 2298

0983
2261
1881

0123
0124
0114
0101

Fine sand
Carriage of fine sand
Spun yarn or plain gaskin @ 0.30 kg per joint
= 0.30x50= 15.00 kg
LABOUR
Mason 1st class
Mason 2nd class
Beldar
Bhishti

cum
cum
kilog

0.05
0.05
15.00

640.00
87.60
40.00

Day
Day
Day
Day

2.25
2.25
5.50
1.50

301.00
273.00
247.00
260.00
Total:
11523.95

Add water charges @ 1% on

Add C.P & OH @15% on

11639.19
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 446.17
Rs 597.85

Item Code: 19.2.1

P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes .. ..: 100 mm
diameter S.W. pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
Area = W x (W/2) + 112x (3.14/4 x W.W ) (3.14/4 xd^2 )
= W x {sqr(A) + 0.5 x 3.14/4 } - (3.14/4 x d^2)
Where W = D + X
D = 100 + 12 + 12 = 124 mm or 12.4 cm
X = 300 mm as trench depth is less than 1200 mm
Area = (30.0 + 12.4) (0.5 + 3.14x1/8) - (3.14/2)R^2
= (42.4)^2 (0.5 + 3.14/8) - 3.14/4x(12.4)^2
= (1797.76) (0.89) - 0.7854x153.76
= 1600.01-120.76 = 1479.2 sq.cm.
= 0.1479 sqm Say 0.148 sqm
For 10 m length qty. of concrete reqd. = 1.48 cum
04.001.10 P/L CC excluding centering - All work up to plinth level: 1:5:10 1.48
3357.38
Coarse sand, 40mmstone
Total:
Add water charges @ 1% except on [A] i.e on
0.00
Add C.P & OH @15% except on [A] i.e on
0.00
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 496.89
Rs 496.90

Item Code: 19.2.2

P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes .. ..: 150 mm
diameter S.W. pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
Area = W x (W/2) + 1/2 x (3.14/4 x W^2 ) - (3.14/4 x d^2)
= W x { / + 14 x (3.14/4)} - (3.14/4 x d )
Where W = D + X
D = 150+ 16+ 16= 182 mm or 18.2 cm
X = 300 mm as trench depth is less than 1200 mm
Area = (30.0 + 18.2)^2 (0.5 + 3.14x1/8) - 3.14xx(18.2)^2
= (48.2)^2 (0.5 + 3.14/8) - 3.14/4x(18.2)^2

DSR-12

Page 956 of 2298

04.001.10

= (2323.24) (0.89)-260.02
= 2067.68 -260.02 = 1807.66 sq.cm.
= 0.1808 sqm Say 0.181 sqm
For 10 m length qty. of concrete reqd. = 1.81 cum
P/L CC excluding centering - All work up to plinth level: 1:5:10 Coarse sand, 40mmstone

1.81

3357.38

Add water charges @ 1% except on [A] i.e on

Total:
0.00

Add C.P & OH @15% except on [A] i.e on

0.00
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 607.69
Rs 607.70

Item Code: 19.2.3

P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes .. .. 200 mm
diameter S.W. pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
Area = W x (W/2) + 1/2 x (3.14/4 x W^2 ) - (3.14/4 xd^2 )
= W^2 x {1/2 + 1/2 x (3.14/4)} - (3.14/4 x d^2 )
Where W = D + X
D = 200 + 17 + 17 = 234 mm or 23.4 cm
X = 300 mm as trench depth is less than 1200 mm
Area = (30.0 + 23.4)^2 (0.5 + 3.14x1/8) 3.14x 1/4x(23.4)^2
= (53.4)^2 (0.5 + 3.14/8) - 3.14/4x(23.4)^2
= (2851.56) (0.89)-429.83
= 2537.89 -429.83 =2108.06 sq.cm.
= 0.2108 sqm Say 0.211 sqm
For 10 m length qty. of concrete reqd. = 2.11 cum
04.001.10

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum

Coarse sand, 40mmstone

2.11

3357.38

Add water charges @ 1% except on [A] i.e on

Total:
0.00

Add C.P & OH @15% except on [A] i.e on

0.00
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 708.41
Rs 708.40

Item Code: 19.2.4

P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes .. .. 250 mm
diameter S.W. pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
Area = W x (W/2) + 1/2 x (3.14/4 x W^2 ) - (3.14/4 xd^2 )
= W^2 x {1/2 + 1/2 x (3.14/4)} - (3.14/4 x d^2 )
Where W = D + X
D = 250 + 20 + 20 = 290 mm or 29.0 cm
X = 300 mm as trench depth is less than 1200 mm
W=29 + 30 = 59cm
Area = (30.0 + 29)^2 (0.5 + 3.14x1/8) 3.14x 1/4x(29)^2
= (53.4)^2 (0.5 + 3.14/8) - 3.14/4x(23.4)^2

DSR-12

Page 957 of 2298

= 2447 sq.cm.
= 0.2447 sqm Say 0.244 sqm
For 10 m length qty. of concrete reqd. = 2.44 cum
04.001.10

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum

Coarse sand, 40mmstone

2.44

3357.38

Add water charges @ 1% except on [A] i.e on

Total:
0.00

Add C.P & OH @15% except on [A] i.e on

0.00
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 819.20
Rs 819.20

Item Code: 19.3.1

P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)up to haunches.. including bed concrete
as per standard design : 100mm diameter S.W. pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
Area = WxDl + 2xxR Cot QxR[R^2 /2(3.14/2-Q)] - (3.14/2)R^2
= WD1 + R^2 (Cot Q) - R^2 (3.14/2 - Q) - (3.14/2)R
= WDl+R^2 (CotQ-3.14 + Q)
Where Sin Q = [R/(W/2)] = 2R/W
W = D + X ; X = 300 mm, D = 100 + 12 + 12 = 124 mm
W= 124+ 300 = 424 mm
D1 = Depth = 100 + ( x 124) = 162 mm
R = 62 mm
Sin Q = (2x62)/424 = 0.292 thereforeQ = 170'
Hence Tan Q = 0.3057
Area = 424 x 162 + (62)^2 (Cot Q - 3.14 + Q)
= *68688 + 3844 (1/0.3057 - 180 + 170')+ sqmm
= *68688 + 3844 (3.27 - 1630' x 3.14/180)+ sqmm
= (68688 + 3844 x 0.43) sqmm
= (68688 + 1652.92) sqmm = 70340.92 sqmm
Say 70341 sqmm or 0.070341 sqm
For 10 m length qty. of concrete reqd. =
0.07034x10 = 0.7034 cum
04.001.10

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum

Coarse sand, 40mmstone

0.7034

3357.38

Add water charges @ 1% except on [A] i.e on

Total:
0.00

Add C.P & OH @15% except on [A] i.e on

0.00
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 236.16
Rs 236.15

Item Code: 19.3.2

P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes .. ..: 150 mm
diameter S.W. pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
Area = WxDl + 2xxRcot Q R[R^2 /2(3.14/2-Q)] -(3.14/2)R^2

DSR-12

Page 958 of 2298

=WD1 + R^2 (Cot Q) - R^2 (3.14/2 - Q) - (3.14/2)R

= WD1 + R^2 (Cot Q - 3.14 + Q)
Where Sin Q = [R/(W/2)] = 2R/W
W = D + X;X = 300mm, D= 150+ 16+ 16 = 182 mm
W= 182 + 300 = 482 mm
D1 = Depth = 150 + ( x 182) = 241 mm
R = 91 mm
Sin Q = (2x91)/482 = 0.3776 therefore
Q = 2212'
Hence Tan Q = 0.4081
Area = 482x241 +(91)^2 (Cot Q - 3.14 + Q)
= *116162 + 8281 (1/0.4081-180 +2212')+ sqmm
= *116162 + 8281 (2.45-15748x3.14/180)+ sqmm
= [116162 + 8281 x (2.45-2.75)] sqmm
= [116162 + 8281 x (-0.30)] sqmm
= (116162 - 2484.3) sqmm = 113677.7 sqmm
Say 113677.7 sqmm or 0.1136777 sqm
For 10 m length qty. of concrete reqd. =
0.1136777x10= 1.136777 cum Say 1.14 cum
04.001.10

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum

Coarse sand, 40mmstone

1.14

3357.38

Add water charges @ 1% except on [A] i.e on

Total:
0.00

Add C.P & OH @15% except on [A] i.e on

0.00
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 382.74
Rs 382.75

Item Code: 19.3.3

P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes .. ..: 200 mm
diameter S.W. pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
Area = WxDl + 2xxR Cot Q.R.[R^2 /2(3.14/2-Q)] -(3.14/2)R^2
=WD1 + R^2 (Cot Q) - R^2 (3.14/2 - Q) - (3.14/2)R
= WD1 + R^2 (Cot Q - 3.14 + Q)
Where Sin Q = [R/(W/2)] = 2R/W
W = D + X ; X = 300 mm, D = 200 + 17 + 17
= 234 mm
W = 234 + 300 = 534 mm
D1 = Depth = 150 + ( x 234) = 267
mm R= 117mm
Sin Q = (2x117)/534 = 0.4382 thereforeQ = 260'
Hence Tan Q = 0.4877
Area = 534 x 267 + (117)^2 (Cot Q - 3.14 + Q)
= *142578 + 13689 (1/0.4877-180 + 260')+ sqmm
= *142578 + 13689 (2.05- 540' x 3.14/180)+ sqmm
= [142578 + 13689 x (2.05-2.69)] sqmm
= [142578 + 13689 x (-0.64)] sqmm
= (142578 - 8760.96) sqmm = 133817.04 sqmm
Say 133817 sqmm or 0.134 sqm
For 10 m length qty. of concrete reqd. =
0.134x10= 1.34 cum

DSR-12

Page 959 of 2298

04.001.10

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum

Coarse sand, 40mmstone

1.34

3357.38

Add water charges @ 1% except on [A] i.e on

Total:
0.00

Add C.P & OH @15% except on [A] i.e on

0.00
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 449.89
Rs 449.90

Item Code: 19.3.4

P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes .. ..: 250 mm
diameter S.W. pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
Area = WxDl + 2xxR Cot Q.R.[R^2 /2(3.14/2-Q)] -(3.14/2)R^2
=WD1 + R^2 (Cot Q) - R^2 (3.14/2 - Q) - (3.14/2)R
= WD1 + R^2 (Cot Q - 3.14 + Q)
Where Sin Q = [R/(W/2)] = 2R/W
W = D + X ; X = 300 mm, D = 250 + 20 + 20
= 290 mm
W = 290 + 300 = 590 mm
D1 = Depth = 150 + ( x 234) = 267
mm R= 117mm
Sin Q = (2x145)/590 = 0.49154 thereforeQ = 2926'
Hence Tan Q = 0.5635
Area = 590 x 295 + (145)^2 (Cot Q - 3.14 + Q)
= *174050 + 21025 (1/0.5635-180 + 2626')+ sqmm
= *174050 + 21025 (1.77- 15034' x 3.14/180)+ sqmm
= [174050 + 21025 x (1.77-2.63)] sqmm
= [174050 + 21025 x (-0.86)] sqmm
= (174050 - 18081.5) sqmm = 155968.5 sqmm
Say 155968 sqmm or 0.156 sqm
For 10 m length qty. of concrete reqd. =
0.156x10= 1.56 cum

04.001.10

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum

Coarse sand, 40mmstone

1.56

3357.38

Add water charges @ 1% except on [A] i.e on

Total:
0.00

Add C.P & OH @15% except on [A] i.e on

0.00
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 523.75
Rs 523.75

Item Code: 19.3.5

P/L CC 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes .. ..: 250 mm
diameter S.W. pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
Area = WxDl + 2xxR Cot Q.R.[R^2 /2(3.14/2-Q)] -(3.14/2)R^2
=WD1 + R^2 (Cot Q) - R^2 (3.14/2 - Q) - (3.14/2)R

DSR-12

Page 960 of 2298

= WD1 + R^2 (Cot Q - 3.14 + Q)

Where Sin Q = [R/(W/2)] = 2R/W
W = D + X ; X = 300 mm, D = 250 + 20 + 20
= 290 mm
W = 290 + 300 = 590 mm
Dl = Depth = 150 + QA x 290) = 295 mm
R = 145 mm
Sin Q = (2xl45)/590 = 0.49154 therefore Q =
2926'
Hence Tan Q = 0.5635
Area = 590 x 295 + (145)^2 (Cot Q - 3.14 + Q)
=*174050 + 21025(1/0.5635- 180 +
2926')+ sqmm
= *174050 + 21025(1.77- 15034x
3.14/180)] sqmm
= [ 174050 + 21025 x (1.77-2.63)] sqmm
= [ 174050 + 21025 x (-0.86)] sqmm
= (174050 - 18081.5) sqmm = 155968.5
sqmm
Say 155968 sqmm or 0.156 sqm
For 10 m length qty. of concrete reqd. =
0.156x10= 1.56 cum -
04.001.10

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum

Coarse sand, 40mmstone

1.56

3357.38

Add water charges @ 1% except on [A] i.e on

Total:
0.00

Add C.P & OH @15% except on [A] i.e on

0.00
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 523.75
Rs 604.35

Item Code: 19.4.1.1

P/Fsquare-mouth S.W. gully trap grade 'A'' water tight C.I. cover with frame of 300x300mm : 100x100 mm size P type With F.P.S.
Bricks class designation 75
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
1900
100x100mm P' type Gully trap
each
1.00
70.00
1364
CI grating 100x100mm
each
1.00
15.00
1352
CI cover with frame 300x300mm inside (4.5+2.7 kg)
each
1.00
280.00
9999
Carriage of materials
L.S.
4.50
1.49
Cement concrete 1:5:10 ( 1 cement: 5 fine
sand : 10 graded stone aggregate 40 mm
nominal size)
0.68x0.68x0.10 m = 0.046 cum
Concrete around trap
0.30x0.30x0.675 m = 0.061 cum
=0.107 cum
Deduct:
0.345/3x[0.09+0.01+(0.09x0.01)l/2] = 0.015
cum
3.14/4x(0.124)^2 x0.47 = 0.006 cum
= 0.021 cum
Net quantity 0.107 cum (-) 0.021 cum
= 0.086 cum say 0.09 cum

DSR-12

Page 961 of 2298

04.001.11

P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum

Fine sand, 40mmstone ag
Brick work with 75 class designation brick in
cement mortar 1:4(1 cement: 4 coarse sand)
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum

0.09

3087.47

06.001.01

Brick work with F.P.S. bricks of class desgn 75 in foundation Cum

and plinth in: CM 1:4 (1 cem
1.66x0.115x0.04 m = 0.008 cum
(Rate as per item 4.2.3 of S.H. : concrete

0.13

3508.25

04.002.03

P/L CC walls string courses, coping, bed blocks, window sills Cum
,etc. up to floor five level
12 mm cement plaster 1:3 (1 cement: 3 coarse
sand) finished with floating coat of neat
cement:
[l/2x0.358x(l.20+0.40)] = 0.286 sqm say
0.29 sqm

0.008

5272.38

13.009.01

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a Sqm

floating coat of neat cement.

0.29

173.09

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total:
371.71

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

375.43
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1258.06
Rs 1256.35

Item Code: 19.4.1.2

P/Fsquare-mouth S.W. gully trap grade 'A'' water tight C.I. cover with frame of 300x300mm : 100x100 mm size P typeWith Sewer
bricks conforming to IS : 4885
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
1900
100x100 mm Gully trap P type
each
1.00
70.00
1364
C.I. grating .100x100 mm
each
1.00
15.00
1352
C.l. cover with frame 300x300mm inside
each
1.00
280.00
9999
Carriage of materials
L.S.
4.50
1.49
Cement concrete 1:5:10 ( 1 cement: 5 fine sand : 10 graded
stone aggregate 40 mm nominal size)
0.68x0.68x0.10 m = 0.046 cum
Concrete around trap
0.30x0.30x0.675 m = 0.061 cum =0.107 cum
Deduct:
0.345/3x[0.09+0.01+(0.09x0.01)l/2] = 0.015 cum
3.14/4x(0.124)^2 x0.47 = 0.006 cum = 0.021 cum
Net quantity 0.107 cum (-) 0.021 cum
= 0.086 cum say 0.09 cum
04.001.11 P/L CC excluding centering - All work up to plinth level: 1:5:10 0.09
3087.47
Fine sand, 40mmstone ag
Brick work with sewer bricksconforming to IS:4885 in cement
mortar 1:4(1 cement: 4 coarse sand)
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum
06.036.01 B/W extruded burnt flyash clay sewer bricks in found and
0.13
3794.78
plinth CM 1:4
Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
1.66x0.115x0.04 m = 0.008 cum

DSR-12

Page 962 of 2298

04.002.03

13.009.01

P/L CC walls string courses, coping, bed blocks, window sills

,etc. up to floor five level
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement:
[l/2x0.358x(l.20+0.40)] = 0.286 sqm say 0.29 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.

0.008

5272.38

0.29

173.09

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total:
371.71

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

375.43
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1295.31
Rs 1293.60

Item Code: 19.4.2.1

P/Fsquare-mouth S.W. gully trap grade 'A'' water tight C.I. cover with frame of 300x300mm : 150 x 100 mm size P type With F.P.S.
Bricks class designation 75
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
1902
S.W. Gully trap P type 150x100mm
each
1.00
104.00
1366
C.I. grating 150x150 mm
each
1.00
25.00
1352
C.l. cover with frame 300x300mm inside
each
1.00
280.00
9999
Carriage of materials
L.S.
4.50
1.49
Cement concrete 1:5:10 ( 1 cement: 5 fine sand : 10 graded
stone aggregate 40 mm nominal size)
0.68x0.68x0.10 m = 0.046 cum
Concrete around trap
0.30x0.30x0.675 m = 0.061 cum =0.107 cum
Deduct:
0.322/3x[0.09+0.023+(0.09x0.023) 1/2 ] = 0.017 cum
3.14/4x(0.124)^2 x0.485 = 0.006 cum
= 0.023 cum
Net quantity 0.107 cum (-) 0.023 cum
04.001.11 P/L CC excluding centering - All work up to plinth level: 1:5:10 0.08
3087.47
Fine sand, 40mmstone ag
(Rate as per item 4.1.11 of S.H. : Concrete)
Brick work with 75 class designation brick in cement mortar
1:4(1 cement: 4 coarse sand)
06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation
0.13
3508.25
and plinth in: CM 1:4 (1 cem
Rate as per item no 6.1.1 of SH : Brick Work
Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
1.66x0.115x0.04 m = 0.008 cum
04.002.03 P/L CC walls string courses, coping, bed blocks, window sills
0.008
5272.38
,etc. up to floor five level
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement:
[l/2x0.337x(l.20+0.60)] = 0.303 sqm say 0.30 sqm
13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
0.30
173.09
floating coat of neat cement.
Total:
Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on
415.71
Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on
419.87
Cost for 1.00 No.

DSR-12

Page 963 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 1280.03
Rs 1278.30

Item Code: 19.4.2.2

P/L SW gully trap with CI grating, masonry chamber and CI cover with frame : 150 x 100 mm size P type
4885.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost of one gully trap
1902
S.W. Gully trap P type150x100 mm
each
1.00
1366
C.I. grating .150x150 mm
each
1.00
1352
C.l. cover with frame 300x300mm inside
each
1.00
9999
Carriage of materials
L.S.
4.50
Cement concrete 1:5:10 ( 1 cement: 5 fine sand : 10 graded
stone aggregate 40 mm nominal size)
0.68x0.68x0.10 m = 0.046 cum
Concrete around trap
0.30x0.30x0.675 m = 0.061 cum
=0.107 cum
Deduct:
0.322/3x[0.09+0.023+(0.09x0.023) 1/2 ] =
0.017 cum
3.14/4x(0.124)^2 x0.485 = 0.006 cum
= 0.023 cum
Net quantity 0.107 cum (-) 0.023 cum
04.001.11 P/L CC excluding centering - All work up to plinth level: 1:5:10 0.08
Fine sand, 40mmstone ag
(Rate as per item 4.1.11 of S.H. : Concrete)
Brick work with sewer bricks conforming to IS: 4885 in
cement mortar 1:4(1 cement: 4 coarse sand)
06.036.01 B/W extruded burnt flyash clay sewer bricks in found and
0.13
plinth CM 1:4
Rate as per item no 6.36.1 of SH : Brick Work
Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
1.66x0.115x0.04 m = 0.008 cum
04.002.03 P/L CC walls string courses, coping, bed blocks, window sills
0.008
,etc. up to floor five level
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement:
[l/2x0.337x(l.20+0.60)] = 0.303 sqm say 0.30 sqm
13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
0.30
floating coat of neat cement.
Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

: With Sewer bricks IS:

Rate
104.00
25.00
280.00
1.49

3087.47

3794.78

5272.38

173.09
Total:
415.71

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

419.87
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1317.28
Rs 1315.55

Item Code: 19.4.3.1

P/L SW gully trap with CI grating, masonry chamber and CI cover with frame : 180 x 150 mm size P type : With F.P.S. bricks.

Code

DSR-12

Description
Details of cost of one gully trap

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

Page 964 of 2298

1904
1367
1352
9999

04.001.11

06.001.01

04.002.03

13.009.01

180x150 mm Gully trap P type

each
C.I. grating .180x180 mm
each
C.l. cover with frame 300x300mm inside
each
Carriage of materials
L.S.
Cement concrete 1:5:10 ( 1 cement: 5 fine sand : 10 graded
stone aggregate 40 mm nominal size)
0.68x0.68x0.10 m = 0.046 cum
Concrete around trap
0.30x0.30x0.675 m = 0.061 cum
=0.107 cum
Deduct:
0.55/3x[0.09+0.032+(0.09x0.032) 1/2 ] = 0.008 cum
3.14/4x(0.182) x0.70 = 0.018 cum
= 0.026 cum
Net quantity 0.107 cum (-) 0.026 cum
= 0.081 cum say 0.08 cum
P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag
Brick work with 75 class designation brick in cement mortar
1:4(1 cement: 4 coarse sand)
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum
Brick work with F.P.S. bricks of class desgn 75 in foundation
and plinth in: CM 1:4 (1 cem
Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
1.66x0.115x0.04 m = 0.008 cum
P/L CC walls string courses, coping, bed blocks, window sills
,etc. up to floor five level
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement:
[l/2x0.166x(l.20+0.72)] = 0.159 sqm say 0.16 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.

1.00
1.00
1.00
4.50

195.00
30.00
280.00
1.49

0.08

3087.47

0.13

3508.25

0.008

5272.38

0.16

173.09

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total:
511.71

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

516.83
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1367.29
Rs 1365.55

Item Code: 19.4.3.2

P/L SW gully trap with CI grating, masonry chamber and CI cover with frame : 180 x 150 mm size P type : With Sewer bricks IS:
4885.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost of one gully trap
1904
180x150 mm Gully trap P type
each
1.00
195.00
1367
C.I. grating .180x180 mm
each
1.00
30.00
1352
C.l. cover with frame 300x300mm inside
each
1.00
280.00
9999
Carriage of materials
L.S.
4.50
1.49
Cement concrete 1:5:10 ( 1 cement: 5 fine sand : 10 graded
stone aggregate 40 mm nominal size)
0.68x0.68x0.10 m = 0.046 cum
Concrete around trap
0.30x0.30x0.675 m = 0.061 cum
=0.107 cum
Deduct:

DSR-12

Page 965 of 2298

04.001.11

06.036.01

04.002.03

13.009.01

0.155/3x[0.09+0.032+(0.09x0.032) 1/2 ] = 0.008 cum

3.14/4x(0.182)^2 x0.70 = 0.018 cum
= 0.026 cum
Net quantity 0.107 cum (-) 0.026 cum
= 0.081 cum say 0.08 cum
P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag
Brick work with sewer bricks conforming to IS: 4885. in
cement mortar 1:4(1 cement: 4 coarse sand)
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum
B/W extruded burnt flyash clay sewer bricks in found and
plinth CM 1:4
Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
1.66x0.115x0.04 m = 0.008 cum
P/L CC walls string courses, coping, bed blocks, window sills
,etc. up to floor five level
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement:
[l/2x0.166x(l.20+0.072)] = 0.159 sqm say 0.16 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.

0.08

3087.47

0.13

3794.78

0.008

5272.38

0.16

173.09

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total:
511.71

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

516.83
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1404.54
Rs 1402.80

Item Code: 19.5.1

Dismantling of old S.W pipes including breaking of joints and bed concrete : 100 mm diameter.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
LABOUR
0114
Beldar
Day
0.49
0115
coolie
Day
0.36
Add water charges @ 1% on

Rate
247.00
247.00
Total:
209.95

Add C.P & OH @15% on

212.05
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 24.39
Rs 24.40

Item Code: 19.5.2

Dismantling of old S.W pipes including breaking of joints and bed concrete : 150 mm diameter.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
LABOUR
0114
Beldar
Day
0.49
0115
coolie
Day
0.45

DSR-12

Rate

Add water charges @ 1% on

247.00
247.00
Total:
232.18

Add C.P & OH @15% on

234.50

Page 966 of 2298

Cost for 10.00 m

Rate per One Metre:
Rate as per DSR-12:

Rs 26.97
Rs 26.95

Item Code: 19.5.3

Dismantling of old S.W pipes including breaking of joints and bed concrete : 200 mm diameter.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
LABOUR
0114
Beldar
Day
0.49
0115
Coolie
Day
0.51
Add water charges @ 1% on

Rate
247.00
247.00
Total:
247.00

Add C.P & OH @15% on

249.47
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 28.69
Rs 28.70

Item Code: 19.5.4

Dismantling of old S.W pipes including breaking of joints and bed concrete : 250 mm diameter.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
LABOUR
0114
Beldar
Day
0.49
0115
Coolie
Day
0.57
Add water charges @ 1% on

Rate
247.00
247.00
Total:
261.82

Add C.P & OH @15% on

264.44
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 30.41
Rs 30.40

Item Code: 19.5.5

Dismantling of old S.W pipes including breaking of joints and bed concrete : 300 mm diameter.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
LABOUR
0114
Beldar
Day
0.49
0115
Coolie
Day
0.63
Add water charges @ 1% on

Rate
247.00
247.00
Total:
276.64

Add C.P & OH @15% on

279.41
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 32.13
Rs 32.15

Item Code: 19.5.6

Dismantling of old S.W pipes including breaking of joints and bed concrete : 350 mm diameter.
Details of Cost for : 10.00 m

DSR-12

Page 967 of 2298

Code
0114
0115

Description
LABOUR
Beldar
Coolie

Unit

Quantity

Rate

Day
Day

0.60
0.69

247.00
247.00
Total:
318.63

Add water charges @ 1% on

Add C.P & OH @15% on

321.82
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 37.01
Rs 37.00

Item Code: 19.5.7

Dismantling of old S.W pipes including breaking of joints and bed concrete : 400 mm diameter.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
LABOUR
0114
Beldar
Day
0.66
0115
Coolie
Day
0.75
Add water charges @ 1% on

Rate
247.00
247.00
Total:
348.27

Add C.P & OH @15% on

351.75
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 40.45
Rs 40.45

Item Code: 19.5.8

Dismantling of old S.W pipes including breaking of joints and bed concrete : 450 mm diameter.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
LABOUR
0114
Beldar
Day
0.66
0115
Coolie
Day
0.81
Add water charges @ 1% on

Rate
247.00
247.00
Total:
363.09

Add C.P & OH @15% on

366.72
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 42.17
Rs 42.15

Item Code: 19.6.1

P/L non-pressure NP2 class (light duty) R.C.C. pipes...jointed with stiff mixture of CM in the proportion of 1:2 -complete : 100 mm
dia. R.C.C. pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
1700
100mm dia pipe (in 2.00m length)
metre
10.00
135.00
1714
RCC collars for 100mm dia pipes
each
5.00
20.00
2275
Carriage of RCC pipes 100mm dia
100 m
10.00
191.48
0367
Cement
tonne
0.005
5000.00
Cement of 5 joints = 5x0.00065 = 0.00325
cum = 0.0048 t say 0.005 tonne

DSR-12

Page 968 of 2298

2209
0983
2261
0123
0124
0114
0101

Carriage of cement
Fine sand
Carraige of Carraige of Fine sand
LABOUR:
Mason I class
Mason II class
Beldar
Bhisthi

tonne
cum
cum
Day
Day
Day
Day

0.005
0.006
0.006

77.87
640.00
87.60

0.32
0.32
0.63
0.16

301.00
273.00
247.00
260.00
Total:
1879.80

Add water charges @ 1% on

Add C.P & OH @15% on

1898.60
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 218.34
Rs 218.35

Item Code: 19.6.2

P/L non-pressure NP2 class (light duty) R.C.C. pipes...jointed with stiff mixture of CM in the proportion of 1:2 -complete : 150 mm
dia. R.C.C. pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
1701
150mm dia RCC pipe NP2 class (in 2m length)
metre
10.00
154.00
1715
Collars for 150mm dia NP2 class RCC pipe
each
5.00
25.00
2281
Carriage of RCC pipes 150mm dia
100 m
10.00
319.12
0367
Cement
tonne
0.006
5000.00
Cement of 5 joints = 5x0.00065 = 0.00325
cum = 0.0048 t say 0.005 tonne
2209
0983
2261
0123
0124
0114
0101

Carriage of cement
Fine sand
Carraige of Carraige of Fine sand
LABOUR:
Mason I class
Mason II class
Beldar
Bhisthi

tonne
cum
cum
Day
Day
Day
Day

0.006
0.008
0.008

77.87
640.00
87.60

0.39
0.39
0.78
0.16

301.00
273.00
247.00
260.00
Total:
2191.32

Add water charges @ 1% on

Add C.P & OH @15% on

2213.23
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 254.52
Rs 254.50

Item Code: 19.6.3

P/L non-pressure NP2 class (light duty) R.C.C. pipes...jointed with stiff mixture of CM in the proportion of 1:2 -complete : 250 mm
dia. R.C.C. pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
1702
R.C.C. pipes NP2 class 250 mm d
metre
10.00
188.00
1716
R.C.C. collars NP2 class 250 m
each
5.00
40.00
2287
Carraige of Carraige of R.C.C.pipes 250 mm dia
100 m
10.00
737.68
0367
Cement
tonne
0.009
5000.00
Cement of 5 joints = 5x0.00065 = 0.00325

DSR-12

Page 969 of 2298

cum = 0.0048 t say 0.005 tonne

2209
0983
2261
0123
0124
0114
0101

Carriage of cement
Fine sand
Carraige of Carraige of Fine sand
Mason I class
Mason II class
Beldar
Bhisthi

tonne
cum
cum
Day
Day
Day
Day

0.009
0.012
0.012
0.54
0.54
1.50
0.23

Add water charges @ 1% on

77.87
640.00
87.60
301.00
273.00
247.00
260.00
Total:
2948.46

Add C.P & OH @15% on

2977.94
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 342.46
Rs 342.45

Item Code: 19.6.4

P/L non-pressure NP2 class (light duty) R.C.C. pipes...jointed with stiff mixture of CM in the proportion of 1:2 -complete : 300 mm
dia. R.C.C. pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
1703
RCC pipe - NP2 class - with Collar - 300mm dia
metre
10.00
261.00
1717
Collars for RCC pipes - NP2 Class - 300mm dia
each
4.00
49.00
2290
Carriage for RCC pipes 300mm dia
100 m
10.00
911.78
0367
Cement
tonne
0.011
5000.00
Cement of 5 joints = 5x0.00065 = 0.00325
cum = 0.0048 t say 0.005 tonne
2209
0983
2261
0123
0124
0114
0101

Carriage of cement
Fine sand
Carraige of Carraige of Fine sand
LABOUR:
Mason I class
Mason II class
Beldar
Bhisthi

tonne
cum
cum
Day
Day
Day
Day

0.011
0.015
0.015

77.87
640.00
87.60

0.59
0.59
1.16
0.20

301.00
273.00
247.00
260.00
Total:
3641.13

Add water charges @ 1% on

Add C.P & OH @15% on

3677.54
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 422.92
Rs 422.90

Item Code: 19.6.5

P/L non-pressure NP2 class (light duty) R.C.C. pipes...jointed with stiff mixture of CM in the proportion of 1:2 -complete : 450 mm
dia. R.C.C. pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
1704
450mm dia NP2 class RCC pipe (2.5m long)
metre
10.00
380.00
1718
Collars for 450mm dia RCC pipe
each
4.00
75.00
2299
Carriage for RCC pipes
100 m
10.00
2127.50
0367
Cement
tonne
0.024
5000.00

DSR-12

Page 970 of 2298

Cement of 5 joints = 5x0.00065 = 0.00325

cum = 0.0048 t say 0.005 tonne
2209
0983
2261
0123
0124
0114
0101

Carriage of cement
Fine sand
Carraige of Carraige of Fine sand
LABOUR:
Mason I class
Mason II class
Beldar
Bhisthi

tonne
cum
cum
Day
Day
Day
Day

0.024
0.033
0.033

77.87
640.00
87.60

0.75
0.75
1.50
0.33

301.00
273.00
247.00
260.00
Total:
5345.43

Add water charges @ 1% on

Add C.P & OH @15% on

5398.88
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 620.87
Rs 620.85

Item Code: 19.6.6

P/L non-pressure NP2 class (light duty) R.C.C. pipes...jointed with stiff mixture of CM in the proportion of 1:2 -complete : 500 mm
dia. R.C.C. pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
1705
500 mm dia pipe (in 2.5 m. length = 4)
metre
10.00
454.00
1719
Collars 4 Nos.
each
4.00
89.00
2299
carriage of pipe
100 m
10.00
2127.50
0367
Cement of 4 joints = 4x0.00185 = 0.0074 cum
tonne
0.026
5000.00
= 0.011 t
2209
Carriage of cement
tonne
0.026
77.87
0983
Fine sand for 4 joint = 0.0037x4 = 0.0148 cum
cum
0.036
640.00
= 0.015 cum
2261
Carriage of sand
cum
0.036
87.60
LABOUR
0123
Mason 1 st class
Day
0.81
301.00
0124
Mason 2nd class
Day
0.81
273.00
0114
Beldar
Day
1.62
247.00
0101
Bhishti
Day
0.33
260.00
Total:
Add water charges @ 1% on
6217.84
Add C.P & OH @15% on
6280.02
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 722.20
Rs 722.20

Item Code: 19.6.7

P/L non-pressure NP2 class (light duty) R.C.C. pipes...jointed with stiff mixture of CM in the proportion of 1:2 -complete : 100 mm
dia. R.C.C. pipe
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS
1706
600mm dia pipe (in 2.5 m. length = 4 nos.)
metre
10.00
732.00
1720
Collars 4 Nos
each
4.00
109.00
2303
carriage of pipes
100 m
10.00
3191.25

DSR-12

Page 971 of 2298

0367
2209
0983
2261
0123
0124
0114
0101

Cement of 4 joints = 4x0.0054 = 0.0216 cum = 0.032 t

Carriage of cement
Fine sand for 4 joint = 0.0108x4 = 0.043 cum
Carriage of sand
LABOUR
Mason 1 st class
Mason 2nd class
Beldar
Bhishti

tonne
tonne
cum
cum
Day
Day
Day
Day

0.032
0.032
0.043
0.043

5000.00
77.87
640.00
87.60

0.92
0.92
1.83
0.33

301.00
273.00
247.00
260.00
Total:
9334.80

Add water charges @ 1% on

Add C.P & OH @15% on

9428.15
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1084.24
Rs 1084.25

Item Code: 19.6.8

P/L RCC NP2 class pipes with coller jointed cement mortar 1 : 2 fine sand :- 700 mm dia RCC pipe .
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS
1707
700 mm dia pipe (in 2.5 m. length = 4 nos.)
metre
10.00
1721
Collars 4 Nos
each
4.00
2303
carriage of pipes
100 m
10.00
0367
Cement of 4 joints = 4x0.0062 = 0.0248 cum
tonne
0.037
= 0.037 t
2209
Carriage of cement
tonne
0.037
0983
Fine sand for 4 joint = 0.0124x4 = 0.0496 cum
cum
0.05
= 0.05 cum
2261
Carriage of sand
cum
0.05
LABOUR
0123
Mason 1 st class
Day
1.03
0124
Mason 2nd class
Day
1.03
0114
Beldar
Day
2.06
0101
Bhishti
Day
0.42
Add water charges @ 1% on

Rate
995.00
121.00
3191.25
5000.00
77.87
640.00
87.60
301.00
273.00
247.00
260.00
Total:
12186.63

Add C.P & OH @15% on

12308.50
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1415.48
Rs 1415.50

Item Code: 19.6.9

P/L RCC NP2 class pipes with coller jointed cement mortar 1 : 2 fine sand :- 800 mm dia.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS
1709
800 mm dia pipe (in 2.5 m. length = 4 nos.)
metre
10.00
1723
Collars 4 Nos.
each
4.00
2303
carriage of pipes
100 m
10.00
0367
Cement of 4 joints = 4x0.0072 = 0.0288 cum
tonne
0.042
= 0.042 t
2209
Carriage of cement
tonne
0.042
0983
Fine sand for 4 joint = 0.0143x4 = 0.0572 cum
cum
0.057

DSR-12

Rate
960.00
172.00
3191.25
5000.00
77.87
640.00

Page 972 of 2298

2261
0123
0124
0114
0101

= 0.057 cum
Carriage of sand
LABOUR
Mason 1st class
Mason 2nd class
Beldar
Bhishti

cum

0.057

87.60

Day
Day
Day
Day

1.14
1.14
2.28
0.42

301.00
273.00
247.00
260.00
Total:
12188.59

Add water charges @ 1% on

Add C.P & OH @15% on

12310.48
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1415.71
Rs 1415.70

Item Code: 19.6.10

P/L RCC NP2 class pipes with coller jointed cement mortar 1 : 2 fine sand :- 900 mm dia.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS
1710
900 mm dia pipe (in 2.5 m. length = 4 nos.)
metre
10.00
1724
Collars 4 Nos.
each
4.00
2331
Carriage of pipes
100 m
10.00
0367
Cement of 4 joints = 4x0.0082 = 0.0328 cum
tonne
0.049
= 0.0488 t Say 0.049 t
2209
Carriage of cement
tonne
0.049
0983
Fine sand for 4 joint = 0.0164x4 = 0.066 cum
cum
0.066
2261
Carriage of sand
cum
0.066
LABOUR
0123
Mason 1 st class
Day
1.25
0124
Mason 2nd class
Day
1.25
0114
Beldar
Day
3.00
0101
Bhishti
Day
0.50
Add water charges @ 1% on

Rate
1125.00
210.00
4786.87
5000.00
77.87
640.00
87.60
301.00
273.00
247.00
260.00
Total:
14454.03

Add C.P & OH @15% on

14598.57
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1678.84
Rs 1678.85

Item Code: 19.6.11

P/L RCC NP2 class pipes with coller jointed cement mortar 1 : 2 fine sand :- 1000 mm dia.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS
1711
1000 mm dia pipe (in 2.5 m. length = 4 nos.)
metre
10.00
1725
Collars 4 Nos.
each
4.00
2332
Carriage of pipes
100 m
10.00
0367
Cement of 4 joints = 4x0.0092 = 0.0368 cum
tonne
0.055
= 0.055 t
2209
Carriage of cement
tonne
0.055
0983
Fine sand for 4 joint = 0.0185x4 = 0.074 cum
cum
0.074
2261
Carriage of sand
cum
0.074
LABOUR
0123
Mason 1 st class
Day
1.36

DSR-12

Rate
1420.00
256.00
6382.50
5000.00
77.87
640.00
87.60
301.00

Page 973 of 2298

0124
0114
0101

Mason 2nd class

Beldar
Bhishti

Day
Day
Day

1.36
4.33
0.50

Add water charges @ 1% on

273.00
247.00
260.00
Total:
18175.52

Add C.P & OH @15% on

18357.28
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2111.09
Rs 2111.10

Item Code: 19.6.12

P/L RCC NP2 class pipes with coller jointed cement mortar 1 : 2 fine sand :- 1100 mm dia.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS
1712
1100 mm dia pipe (in 2.5m.length = 4 Nos.)
metre
10.00
1726
Collars 4 Nos.
each
4.00
2333
carnage of pipes
100 m
10.00
0367
Cement of 4 joints = 4x0.0103 =0.0412 cum
tonne
0.061
= 0.061 t
2209
Carriage of cement
tonne
0.061
0983
Fine sand for 4 joint = 0.0206x4 = 0.0824 cum
cum
0.082
= 0.082 cum
2261
Carriage of sand
cum
0.082
LABOUR
0123
Mason 1st class
Day
1.47
0124
Mason 2nd class
Day
1.47
0114
Beldar
Day
6.30
0101
Bhishti
Day
0.60
Add water charges @ 1% on

Rate
1730.00
283.00
6382.50
5000.00
77.87
640.00
87.60
301.00
273.00
247.00
260.00
Total:
21995.54

Add C.P & OH @15% on

22215.50
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2554.78
Rs 2554.80

Item Code: 19.6.13

P/L RCC NP2 class pipes with coller jointed cement mortar 1 : 2 fine sand :- 1200 mm dia.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIALS
1713
1200 mm dia pipe (in 2.5 m. length = 4 nos.)
metre
10.00
1727
Collars 4 Nos
each
4.00
2334
Carriage of pipes
100 m
10.00
0367
Cement of 4 joints = 4x0.0114 = 0.0456 cum
tonne
0.068
= 0.068 t
2209
Carriage of cement
tonne
0.068
0983
Fine sand for 4 joint = 0.0229x4 = 0.0916 cum
cum
0.092
= 0.092 cum
2261
Carriage of sand
cum
0.092
LABOUR
0123
Mason 1 st class
Day
1.59
0124
Mason 2nd class
Day
1.59
0114
Beldar
Day
8.67

DSR-12

Rate
1760.00
330.00
6382.80
5000.00
77.87
640.00
87.60
301.00
273.00
247.00

Page 974 of 2298

0101

Bhishti

Day

0.67

Add water charges @ 1% on

260.00
Total:
23198.87

Add C.P & OH @15% on

23430.86
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2694.55
Rs 2694.55

Item Code: 19.7.1.1

C/o brick masonry manhole in CM1:4 Inside size 90x80cm and 45cm deep including C.I. cover and frame(38kg) : With non-modular
bricks of 7.5 class desgn.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for 1 manhole
MATERIALS
Cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size)
1.51x1.41x0.20=0.426 cum Say 0.43 cun.
04.001.08 P/L CC excluding centering - All work up to plinth level: 1:4:8 0.43
3593.30
Coarse sand, 40mmstone a
Brick work with bricks of class designation 75
in foundation & plinth in cement mortar 1:4 (1 cement: 4
coarse sand)
4.32x0.23x0.35 m = 0.348 cum
Less for pipe 2x3.14/4x(0.15m)^2 x0.23m = (-) 0.008 cum
= 0.340 cum
06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation
0.34
3508.25
and plinth in: CM 1:4 (1 cem
Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) for benching

04.001.03

13.009.01

05.003

0115

05.022.01

DSR-12

2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum

Less for pipe 1x0.90x3.14/4x(0.15 m)^2 = (-) 0.02 cum
= 0.16 cum
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
3.40mx0.05m = 0.17 sqm
2x 1/2x0.80x0.10m = 0.08 sqm
= 0.25 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
Reinforced cement concrete 1:2:4 (1 cement: 2 coarse sand :
4 graded stone aggregate 20 mm nominal size)
For slab: 1.36x1.26x0.15m = 0.257 cum
Less for cover 0.61x0.455x0.15m = (-) 0.042cum
= 0.215 cum Say 0.22 cum
RCC in beams, suspended floors, staircases, etc upto floor 5
level excldg centering, shutt
Deduct labour for not lifting material upto floor five level
Coolie
Day
Mild steel reinforcement for slab :
0.22 cum @ 48.06 kg/cum = 10.57 kg
Reinforcement for R.C.C. work all complete. -Upto plinth level
Mild steel and Medium Tensi

0.16

4514.03

0.25

173.09

0.22

5494.55

-0.41

247.00

10.57

56.77

Page 975 of 2298

05.009.03

0123
0124
1354
9999
9999
9999

Form work = 0.90x0.80= 0.72 sqm

Less cover = 0.61x0.45m = (-) 0.278 sqm
=0.42 sqm. say 0.44 sqm.
Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi
LABOUR
Extra labour for making channel:
Mason 1st class
Day
Mason 2nd class
Day
C.I. Cover with frame 455x610 mm (inside)
each
Carriage of C.I. cover & frame
L.S.
Painting of C.I. cover & frame with coal tar
L.S.
Sundries
L.S.

0.44

311.22

0.06
0.06
1.00
6.76
6.76
13.52

301.00
273.00
1415.00
1.49
1.49
1.49
Total:
1388.45

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

1402.33
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 7061.92
Rs 7132.00

Item Code: 19.7.1.2

Constructing brick masonry manhole in cement mortar 1:4, RCC top slab and making channel CC 1:2:4 :- inside size 90x80 cm 45 cm
deep i/c CI cover with frame (LD). With Sewer bricks IS: 4885.

Code

04.001.08

06.036.01

04.001.03

13.009.01

DSR-12

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for 1 manhole
MATERIALS
Cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size)
1.51x1.41x0.20m=0.426 cum Say 0.43 cun.
P/L CC excluding centering - All work up to plinth level: 1:4:8 0.43
Coarse sand, 40mmstone a
Brick work with sewer bricks conforming to IS: 4885. in
foundation & plinth in cement mortar 1:4 (1 cement: 4 coarse
sand)
4.32x0.23x0.35 m = 0.348 cum
Less for pipe 2x3.14/4x(0.15m)^2 x0.23m = (-) 0.008 cum
= 0.340 cum
B/W extruded burnt flyash clay sewer bricks in found and
0.34
plinth CM 1:4
Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) for benching
2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum
Less for pipe 1x0.90x3.14/4x(0.15 m)^2 = (-) 0.02 cum
= 0.16 cum
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
3.40mx0.05m = 0.17 sqm
2x 1/2x0.80x0.10m = 0.08 sqm
= 0.25 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.

Rate

3593.30

3794.78

0.16

4514.03

0.25

173.09

Page 976 of 2298

05.003

0115

05.022.01

05.009.03

0123
0124
1354
9999
9999
9999

Reinforced cement concrete 1:2:4 (1 cement: 2 coarse sand :

4 graded stone aggregate 20 mm nominal size)
For slab: 1.36x1.26x0.15m = 0.257 cum
Less for cover 0.61x0.455x0.15m = (-) 0.042 cum
= 0.215 cum Say 0.22 cum
RCC in beams, suspended floors, staircases, etc upto floor 5
level excldg centering, shutt
Deduct labour for not lifting material upto floor five level
Coolie
Mild steel reinforcement for slab :
0.22 cum @ 48.06 kg/cum = 10.57 kg
Reinforcement for R.C.C. work all complete. -Upto plinth level
Mild steel and Medium Tensi
Form work = 0.90x0.80= 0.72 sqm
=0.442 sqm say 0.44 sqm
Less cover = 0.61x0.455m = (-) 0.278 sqm
Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi
LABOUR
Extra labour for making channel:
Mason 1st class
Mason 2nd class
C.I. Cover with frame 455x610 mm (inside)
Carriage of C.I. cover & frame
Painting of C.I. cover & frame with coal tar
Sundries

Day

Day
Day
each
L.S.
L.S.
L.S.

0.22

5494.55

-0.41

247.00

10.57

56.77

0.44

311.22

0.06
0.06
1.00
6.76
6.76
13.52

301.00
273.00
1415.00
1.49
1.49
1.49
Total:
1388.45

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

1402.33
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 7159.34
Rs 7229.45

Item Code: 19.7.2.1

C/o brick masonry manhole in CM1:4 Inside size 120x90cm and 90cm deep including C.I. cover and frame(58kg) : With common
burnt FPS (non-modular) bricks of 7.5 class desgn
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for 1 manhole
MATERIALS
Cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size)
1.81x1.51x0.20m=0.547 cum Say 0.55 cun.
04.001.08 P/L CC excluding centering - All work up to plinth level: 1:4:8 0.55
3593.30
Coarse sand, 40mmstone a
Brick work with bricks of class designation 75
in foundation & plinth in cement mortar 1:4 (1 cement: 4
coarse sand)
5.12x0.23x0.80 m = 0.942 cum
Less for pipe 2x3.14/4x(0.15m)^2 x0.23m = (-) 0.008 cum
= 0.934 cum say 0.93 cum
06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation
0.93
3508.25
and plinth in: CM 1:4 (1 cem
Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) for benching

DSR-12

Page 977 of 2298

04.001.03

13.009.01

05.003

0115

05.022.01

05.009.03

0123
0124
1356
9999
9999
9999

2x1.20x(0.90x10.30/2) x (0.30+0.20)/2 = 0.270 cum

Less for pipe 1.20x3.14/4x(0.15 m)^2 = (-) 0.021 cum
= 0.249 cum say 0.25 cum.
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
4.20mx0.50m = 2.10 sqm
2x 1/2x0.90x0.10m = 0.08 sqm
Total = 2.19 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
Reinforced cement concrete 1:2:4 (1 cement: 2 coarse sand :
4 graded stone aggregate 20 mm nominal size)
For slab: 1.66x1.36x0.15m = 0.339 cum
Less for cover 0.7854x(0.50)^2 x0.15m = (-) 0.029 cum =
0.31cum
RCC in beams, suspended floors, staircases, etc upto floor 5
level excldg centering, shutt
Deduct labour for not lifting material upto floor five level
Coolie
Mild steel reinforcement for slab :
0.31 cum @ 48.06 kg/cum = 24.83 kg
Reinforcement for R.C.C. work all complete. -Upto plinth level
Mild steel and Medium Tensi
Form work = 1.20x0.90= 1.08 sqm
Less cover = 3.14/4x(0.50)^2 =(-) 0.196 sqm
= 0.884 sqm Say 0.88 sqm
Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi
LABOUR
Extra labour for making channel:
Mason 1st class
Mason 2nd class
C.I. Cover with frame 500 mm (inside)
Carriage of C.I. cover & frame
Painting of C.I. cover & frame with coal tar
Sundries

Day

Day
Day
each
L.S.
L.S.
L.S.

0.25

4514.03

2.19

173.09

0.31

5494.55

-0.58

247.00

24.83

56.77

0.88

311.22

0.08
0.08
1.00
6.76
6.76
16.64

301.00
273.00
4435.00
1.49
1.49
1.49
Total:
4382.59

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

4426.42
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 15223.73
Rs 15322.95

Item Code: 19.7.2.2

Constructing brick masonry manhole in cement mortar 1:4, RCC top slab and making channel CC 1:2:4 :- inside size 120 x 90 x 90 cm
i/c CI cover with frame 500 mm dia (MD). With Sewer bricks conforming to IS : 4885.

Code

DSR-12

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for 1 manhole
MATERIALS
Cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size)
1.81x1.51x0.20m=0.547 cum Say 0.55 cun.

Rate

Page 978 of 2298

04.001.08

06.036.01

04.001.03

13.009.01

05.003

0115

05.022.01

05.009.03

0123
0124
1356
9999
9999
9999

P/L CC excluding centering - All work up to plinth level: 1:4:8 Coarse sand, 40mmstone a
Brick work with sewer bricks conforming to IS: 4885. in
foundation & plinth in cement mortar 1:4 (1 cement: 4 coarse
sand)
5.12x0.23x0.80 m = 0.942 cum
Less for pipe 2x3.14/4x(0.15m)2 x0.23m = (-) 0.008 cum
= 0.934 cum say 0.93 cum
B/W extruded burnt flyash clay sewer bricks in found and
plinth CM 1:4
Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) for benching
2x1.20x0.90x(0.80/2) x (0.30+0.20)/2 = 0.270 cum
Less for pipe 1.20x3.14/4x(0.15 m)^2 = (-)
0.021 cum
= 0.249 cum say 0.25 cum
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
4.20mx0.50m = 2.10 sqm
2x 1/2x0.90x0.10m = 0.08 sqm
= 2.19 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
Reinforced cement concrete 1:2:4 (1 cement: 2 coarse sand :
4 graded stone aggregate 20 mm nominal size)
For slab: 1.66x1.36x0.15m = 0.339 cum
Less for cover 0.7854x(0.50)^2 x0.15m = (-) 0.029 cum
= 0.31cum
RCC in beams, suspended floors, staircases, etc upto floor 5
level excldg centering, shutt
Deduct labour for not lifting material upto floor five level
Coolie
Mild steel reinforcement for slab :
0.31 cum @ 48.06 kg/cum = 24.83 kg
Reinforcement for R.C.C. work all complete. -Upto plinth level
Mild steel and Medium Tensi
Form work = 1.20x0.90= 1.08 sqm
Less cover = 3.14/4x(0.50)^2 =(-) 0.196 sqm
= 0.884 sqm Say 0.88 sqm
Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi
LABOUR
Extra labour for making channel:
Mason 1st class
Mason 2nd class
C.I. Cover with frame 500 mm (inside)
Carriage of C.I. cover & frame
Painting of C.I. cover & frame with coal tar
Sundries

Day

Day
Day
each
L.S.
L.S.
L.S.

0.55

3593.30

0.93

3794.78

0.25

4514.03

2.19

173.09

0.31

5494.55

-0.58

247.00

24.83

56.77

0.88

311.22

0.08
0.08
1.00
6.76
6.76
16.64

301.00
273.00
4435.00
1.49
1.49
1.49
Total:
4382.59

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

4426.42
Cost for 1.00 No.
Rate per Each:

DSR-12

Rs 15490.21

Page 979 of 2298

Rate as per DSR-12:

Rs 15589.40

Item Code: 19.7.3.1

Constructing brick masonry manhole in cement mortar 1:4, RCC top slab and making channel CC 1:2:4 :- inside size 120 x 90 x 90 cm
i/c CI cover with frame 560 mm dia (MD). with common burnt FPS bricks class 7.5

Code

04.001.08

06.001.01

04.001.03

13.009.01

05.003

0115

DSR-12

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for 1 manhole
MATERIALS
Cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size)
1.81x1.51x0.20m=0.547 cum Say 0.55 cun.
P/L CC excluding centering - All work up to plinth level: 1:4:8 0.55
Coarse sand, 40mmstone a
Brick work with bricks of class designation 75 in foundation &
plinth in cement mortar 1:4 (1 cement: 4 coarse sand)
5.12x0.23x0.65 m = 0.765 cum
1x0.56x0.23x0.15 m =0.019 cum
1x0.79x0.23x0.15 = 0.027 cum =0.811
Less for pipe 2x3.14/4x(0.15m) x0.23m = (-) 0.008 cum
= 0.803 cum say 0.80 cum
Brick work with F.P.S. bricks of class desgn 75 in foundation
and plinth in: CM 1:4 (1 cem
Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) for benching
2x1.20x(0.90/2)x(0.30+0.20)/2 = 0.270 cum
Less for pipe 1.20x3.14/4x(0.15 m)^2 = (-) 0.021 cum
= 0.249 cum say 0.25 cum
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
4.20mx0.35m = 1.47 sqm
2x0.56x0.15m = 0.17 sqm
2x1/2x0.90x0.10m = 0.09 sqm
For fixing cover
0.96x0.96 m =0.922 sqm 2.652 sqm
Less cover 3.14/4x(0.56)^2 =(-) 0.246 sqm
=2.406 sqm Say 2.41 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
Reinforced cement concrete 1:2:4 (1 cement: 2 coarse sand :
4 graded stone aggregate 20 mm nominal size)
For slab: 1.66x1.36x0.15m = 0.339 cum
Add extra concreting
1x(0.56+0.79)x0.15x0.15 m=0.03 cum =0.369 cum
Less for cover 0.7854x(0.50)^2 x0.15m = (-) 0.037 cum
= 0.332 cum Say 0.33 cum
RCC in beams, suspended floors, staircases, etc upto floor 5
level excldg centering, shutt
Deduct labour for not lifting material upto floor five level
Coolie
Steel reinforcement for slab @ 80.9 Kg/cum
For 0.33 cum = 26.43 kg.

Day

Rate

3593.30

0.80

3508.25

0.25

4514.03

2.41

173.09

0.33

5494.55

-0.62

247.00

Page 980 of 2298

05.022.01

05.009.03

0123
0124
3860
9999
9999
9999

Reinforcement for R.C.C. work all complete. -Upto plinth level

Mild steel and Medium Tensi
Form work inside area of man-hole 1.20x0.90 =1.08
Less cover = 3.14/4x(0.56)^2 =(-) 0.246 sqm
= 0.834 sqm Say 0.88 sqm
Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi
LABOUR
Extra labour for making channel:
Mason 1st class
Mason 2nd class
C.I. Cover with frame 560 dia
Carriage of C.I. cover & frame
Painting of C.I. cover & frame with coal tar
Sundries

Day
Day
each
L.S.
L.S.
L.S.

26.43

56.77

0.83

311.22

0.08
0.08
1.00
13.52
6.76
20.28

301.00
273.00
8460.00
1.49
1.49
1.49
Total:
8413.21

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

8497.34
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 19672.46
Rs 19778.80

Item Code: 19.7.3.2

Constructing brick masonry manhole in cement mortar 1:4, RCC top slab and making channel CC 1:2:4 :- inside size 120 x 90 x 90 cm
i/c CI cover with frame 560 mm dia (MD). With sewer bricks IS: 4885.

Code

04.001.08

06.036.01

04.001.03

DSR-12

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for 1 manhole
MATERIALS
Cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size)
1.81x1.51x0.20m=0.547 cum Say 0.55 cun.
P/L CC excluding centering - All work up to plinth level: 1:4:8 0.55
Coarse sand, 40mmstone a
Sewer Brick conforming to IS: 4885. in foundation & plinth in
cement mortar 1:4 (1 cement: 4 coarse sand)
5.12x0.23x0.65 m = 0.765 cum
1x0.56x0.23x0.15 m =0.019 cum
1x0.79x0.23x0.15 = 0.027 cum =0.811
Less for pipe 2x3.14/4x(0.15m) x0.23m = (-) 0.008 cum
= 0.803 cum say 0.80 cum
B/W extruded burnt flyash clay sewer bricks in found and
0.80
plinth CM 1:4
Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) for benching
2x1.20x(0.90/2)x(0.30+0.20)/2 = 0.270 cum
Less for pipe 1.20x3.14/4x(0.15 m)^2 = (-) 0.021 cum
= 0.249 cum say 0.25
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
4.20mx0.35m = 1.47 sqm
2x0.56x0.15m = 0.17 sqm
2x1/2x0.90x0.10m = 0.09 sqm

0.25

Rate

3593.30

3794.78

4514.03

Page 981 of 2298

13.009.01

05.003

0115

05.022.01

05.009.03

0123
0124
3860
9999
9999
9999

For fixing cover

0.96x0.96 m =0.922 sqm
= 2.652 sqm
Less cover 3.14/4x(0.56)^2 =(-) 0.246 sqm
=2.406 sqm Say 2.41 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
Reinforced cement concrete 1:2:4 (1 cement: 2 coarse sand :
4 graded stone aggregate 20 mm nominal size)
For slab: 1.66x1.36x0.15m = 0.339 cum
Add extra concreting
1x(0.56+0.79)x0.15x0.15 m=0.03 cum
=0.369 cum
Less for cover 0.7854x(0.50)^2 x0.15m = (-) 0.037 cum
= 0.332 cum Say 0.33 cum
RCC in beams, suspended floors, staircases, etc upto floor 5
level excldg centering, shutt
Deduct labour for not lifting material upto floor five level
Coolie
Steel reinforcement for slab @ 80.9 Kg/cum
For 0.33 cum = 26.43
Reinforcement for R.C.C. work all complete. -Upto plinth level
Mild steel and Medium Tensi
Form work inside area of man-hole 1.20x0.90 =1.08
Less cover = 3.14/4x(0.56)^2 =(-) 0.246 sqm
= 0.834 sqm Say 0.88 sqm
Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi
LABOUR
Extra labour for making channel:
Mason 1st class
Mason 2nd class
C.I. Cover with frame 560 dia
Carriage of C.I. cover & frame
Painting of C.I. cover & frame with coal tar
Sundries

Day

Day
Day
each
L.S.
L.S.
L.S.

2.41

173.09

0.33

5494.55

-0.62

247.00

26.43

56.77

0.83

311.22

0.08
0.08
1.00
13.52
6.76
20.28

301.00
273.00
8460.00
1.49
1.49
1.49
Total:
8413.21

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

8497.34
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 19901.68
Rs 20008.05

Item Code: 19.8.1.1

Extra for depth for manholes Size 90x80 cm
Code

06.001.01

DSR-12

Details of Cost for : 1.00 m

Description
Unit
Quantity
Details of cost for one meter
MATERIALS
Brick work with bricks of class designation 75 in cement
mortar 1:4(1 cement : 4 coarse sand)
4.32x0.23x1.00 = 0.994 cum Say 0.99
Brick work with F.P.S. bricks of class desgn 75 in foundation
0.99
and plinth in: CM 1:4 (1 cem
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement

Rate

3508.25

Page 982 of 2298

13.009.01

3.40x1 m = 3.40 sqm

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.

3.40

173.09

Add water charges @ 1% except on [A]+[B] i.e on

Total:
0.00

Add C.P & OH @15% except on [A]+[B] i.e on

0.00
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 4061.68
Rs 4061.70

Item Code: 19.8.1.2

Extra for depth of manholes Size 90 x 80 cm : With sewer bricks IS : 4885.
Code

06.036.01

13.009.01

Details of Cost for : 1.00 m

Description
Unit
Quantity
Details of cost for one meter
MATERIALS
Brick work with modular extruded burnt fire clay sewer bricks
in cement mortar 1:4(1 cement : 4 coarse sand)
1x4.32x0.23x1.0 = 0.994 say 0.99 cum
B/W extruded burnt flyash clay sewer bricks in found and
0.99
plinth CM 1:4
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
3.40x1 m = 3.40 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
3.40
floating coat of neat cement.
Add water charges @ 1% except on [A]+[B] i.e on

Rate

3794.78

173.09
Total:
0.00

Add C.P & OH @15% except on [A]+[B] i.e on

0.00
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 4345.34
Rs 4345.40

Item Code: 19.8.2.1

Extra for depth of manholes Size 120 x 90 cm : with F.P.S. bricks .
Code

06.001.01

13.009.01

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIALS
Brick work with modular extruded burnt fire clay sewer bricks
in cement mortar 1:4(1 cement : 4 coarse sand)
5.12x0.23x1.0 = 1.178 say 1.18 cum
Brick work with F.P.S. bricks of class desgn 75 in foundation
and plinth in: CM 1:4 (1 cem
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
4.20x1 m = 4.20 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.

Rate

1.18

3508.25

4.20

173.09

Add water charges @ 1% except on [A]+[B] i.e on

Total:
0.00

Add C.P & OH @15% except on [A]+[B] i.e on

0.00
Cost for 1.00 No.

DSR-12

Page 983 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 4866.72
Rs 4866.75

Item Code: 19.8.2.2

Extra for depth of manholes Size 120 x 90 cm : With sewer bricks IS : 4885.
Code

06.036.01

13.009.01

Details of Cost for : 1.00 m

Unit
Quantity

Rate

1.18

3794.78

4.20

173.09

Add water charges @ 1% except on [A]+[B] i.e on

Total:
0.00

Description
MATERIALS
Brick work with modular extruded burnt fire clay sewer bricks
in cement mortar 1:4 (1 cement : 4 coarse sand)
5.12x0.23x1.00=1.178 say 1.18 cum
B/W extruded burnt flyash clay sewer bricks in found and
plinth CM 1:4
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
4.20x1 m = 4.20sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.

Add C.P & OH @15% except on [A]+[B] i.e on

0.00
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 5204.82
Rs 5204.90

Item Code: 19.9.1.1

C/o brick masonry circular manhole 1.22 m dia./ 0.56m dia : 0.91 m deep with SFRC cover and frame (HD20 grade) wt not less than
182 Kg With bricks of class designation 75.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for 1 manhole
MATERIALS
Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded
stone aggregate 40 mm nominal size) 1.67x1.67x0.225 =
0.63cum.
04.001.06 P/L CC excluding centering - All work up to plinth level: 1:3:6 0.63
3888.20
Coarse sand, 40mmstone a
Brick work with bricks of class designation 75 in cement
mortar 1:4 (1 cement: 4 coarse sand)
Curved on plan
3.14x1.14x0.074x0.23=0.061
3.14x(1.14+0.79)^2 x0.711x0.23 = 0.496
= 0.557
Duduct arch ring and portion of pipe
2x x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)^2 x0.230 = 0.008 cum
= 0.026 cum
Net quantity 0.557-0.026 = 0.531 Say 0.53cum
06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation
0.53
3508.25
and plinth in: CM 1:4 (1 cem
Brick work in foundation with 75 class designation brick in
cement mortar 1:4 ( 1 cement: 4 coarse sand)
2x 1/2 x3.14x0.25 m x0.230x0.10 m = 0.018 cum Say 0.02 cum
06.009

DSR-12

B/W in plain arches in s/s for span upto 6 m with bricks in CM Cum
1:3

0.02

6384.11

Page 984 of 2298

04.001.03

04.002.03

13.009.01

0123
0124
7135
9999
9999

Cement concrete 1:2:4(1 cement: 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size)
For benching:
3.14/4x(0.91+0.82)^2 x0.20 = 0.118 cum
[(2x8.133)/360]x(4/3)x3.14x(0.45)^3 =0.017 cum
= 0.135 cum
Less pipe : 0.91x3.14/4x(0.15)^2 = (-) 0.016 cum
P/L CC excluding centering - All work up to plinth level: 1:2:4 - Cum
Coarse sand, 20mmstone a
Rate as per item no. 4.2.3 of SH : concrete
Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
For fixing cover : 3.14/4 x d^2 x thickness
0.7854x1.020x1.020x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)2 x 0.15 m = (-) 0.037 cum
= 0.086 cum Say 0.09 cum
P/L CC walls string courses, coping, bed blocks, window sills Cum
,etc. up to floor five level
12 mm cement plaster 1:3(1 cement: 3 coarse sand) finished
with floating coat of neat cement 3.14x(0.80+0.56)/2x0.49 =
1.05 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(0.80)^2 /4-0.80x0.15+0.80x 1/2x3.14x0.15 = 0.57 sqm
= 1.75 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
LABOUR
Extra labour for making channel:
Mason 1st class
Mason 2nd class
S.F.R.C cover 560 mm dia with fram (heavy duty)
Carriage
Sundries

Day
Day
each
L.S.
L.S.

0.12

4514.03

0.09

5272.38

1.75

173.09

0.06
0.06
1.00
6.89
16.90

301.00
273.00
1030.00
1.49
1.49
Total:
1099.89

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

1110.89
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 7033.24
Rs 7007.40

Item Code: 19.9.1.2

Constructing brick masonry circular manhole 1.22 m dia. at bottom and 0.56 m dia at top : 0.91 m deep with SFRC cover and frame
(HD20 grade) 560mm internal diameter, total weight not less than 182 Kg With sewer bricks IS: 4885.

Code

04.001.06

DSR-12

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for 1 manhole
MATERIALS
Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded
stone aggregate 40 mm nominal size) 1.67x1.67x0.225 =
0.63cum.
P/L CC excluding centering - All work up to plinth level: 1:3:6 0.63
Coarse sand, 40mmstone a
Brick work with moduler extruded burnt fire clay sewer bricks
in cement mortar 1:4(1 cement: 4 coarse sand)

Rate

3888.20

Page 985 of 2298

06.036.01

06.037

04.001.03

04.002.03

13.009.01

0123
0124
7135
9999
9999

Curved on plan
3.14x1.14x0.074x0.23 =0.061
3.14x(1.14+0.79)/2x0.711x0.23 = 0.496
= 0.557
Duduct arch ring and portion of pipe
2x x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15) x0.230 = 0.008 cum
= 0.026 cum
Net quantity 0.557-0.026 = 0.531 Say 0.53
B/W extruded burnt flyash clay sewer bricks in found and
plinth CM 1:4
Brick work moduler extruded burnt fire clay sewer bricks in
arches brick in cement mortar 1:3 (1 cement: 3 coarse sand)
2x x3.14x0.25m x0.230x0.10 m = 0.018 cum Say 0.02 cum
B/W with modular extruded burnt fly ash clay sewer in arches
in found and plinth in CM 1:3
Cement concrete 1:2:4(1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
For benching:
3.14/4x(0.91+0.82)^2 x0.20 = 0.118 cum
[(2x8.133)/360]x(4/3)x3.14x(0.45)^3 =0.017 cum
= 0.135 cum
Less pipe : 0.91x3.14/4x(0.15)^2 = (-) 0.016 cum
= 0.119 cum Say 0.12 cum
Rate as per item no. 4.1.3 of SH : concrete work
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
For fixing cover : 3.14/4 x d^2 x thickness
0.7854x1.020x1.020x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)^2 x 0.15 m = (-) 0.037 cum
= 0.086 cum Say 0.09 cum
P/L CC walls string courses, coping, bed blocks, window sills
,etc. up to floor five level
12 mm cement plaster 1:3(1 cement: 3 coarse sand) finished
with floating coat of neat cement
3.14x(0.80+0.56)/2x0.49 = 1.05 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(0.80)^2 /4-0.80x0.15+0.80x1/2x3.14x0.15 = 0.57 sqm
= 1.75 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
LABOUR
Extra labour for making channel:
Mason 1st class
Mason 2nd class
S.F.R.C cover 560 mm dia with fram (heavy duty)
Carriage
Sundries

Day
Day
each
L.S.
L.S.

0.53

3794.78

0.02

6221.63

0.12

4514.03

0.09

5272.38

1.75

173.09

0.06
0.06
1.00
6.89
16.90

301.00
273.00
1030.00
1.49
1.49
Total:
1099.89

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

1110.89
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 7181.85
Rs 7162.50

Page 986 of 2298

Item Code: 19.10.1

Extra depth for circuler type manhole 0.91 m internal dia. with bricks of class designation 75.
Details of Cost for : 0.76 m
Code
Description
Unit
Quantity
Details of Cost for 0.76m depth.
Bricks work in foundation with 75 class designation bricks in
cement mortar 1:4 (1 cement : 4 coarse sand)
06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation Cum
0.63
and plinth in: CM 1:4 (1 cem
cement concrete 1:2:4( 1 cement :2 coarse sand :4 graded
stone aggregate 20mm nominal size)
04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.01
Coarse sand, 20mmstone a
12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished
with neat cement.
13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
2.33
floating coat of neat cement.
Add water charges @ 1% except on [A]+[B]+[C] i.e on

Rate

3508.25

4514.03

173.09
Total:
0.00

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

0.00
Cost for 0.76 m
Rate per One Metre:
Rate as per DSR-12:

Rs 3498.21
Rs 3498.25

Item Code: 19.10.2

Extra depth for circuler type manhole 0.91 m internal dia. With sewer brick IS : 4885.
Details of Cost for : 0.76 m
Code
Description
Unit
Quantity
Details of Cost for 0.76m extra depth.
Brick work with modular exturded burnt fire clay bricks in
cement montar 1:4 (1 cement : 4 coarse sand)
06.036.01 B/W extruded burnt flyash clay sewer bricks in found and
0.63
plinth CM 1:4
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size )
04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.01
Coarse sand, 20mmstone a
12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished
with floating coat of neat cement.
13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
2.33
floating coat of neat cement.
Add water charges @ 1% except on [A]+[B]+[C] i.e on

Rate

3794.78

4514.03

173.09
Total:
0.00

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

0.00
Cost for 0.76 m
Rate per One Metre:
Rate as per DSR-12:

Rs 3735.72
Rs 3735.75

Item Code: 19.11.1.1

Constructing brick masonry circular manhole 1.22 m dia. at bottom and 0.56 m dia at top : 1.68 m deep with SFRC cover and frame
(HD20 grade) 560mm internal diameter, total weight not less than 182 Kg With bricks of class designation 75.
Details of Cost for : 1.00 No.

DSR-12

Page 987 of 2298

Code

04.001.06

06.001.01

06.009

04.001.03

04.002.03

13.009.01

0123
0124
7135
9999
9999

DSR-12

Description
Unit
Details of cost for 1 manhole
MATERIALS
Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded
stone aggregate 40 mm nominal size)
1.98x1.98x0.30 = 1.178 say 1.18 cum.
P/L CC excluding centering - All work up to plinth level: 1:3:6 Coarse sand, 40mmstone a
Brick work with bricks of class designation 75 in cement
mortar 1:4(1 cement: 4 coarse sand)
Curved on plan
3.14x1.45x0.24x0.23 = 0.251
3.14x(1.45+0.79)/2x 1.32x0.23= 1.069
= 1.320
Duduct arch ring and portion of pipe
2x x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)^2 x0.230 = 0.008 cum
= 0.026 cum
Net quantity 1.320-0.026 = 1.294 Say 1.29 cum
Brick work with F.P.S. bricks of class desgn 75 in foundation
and plinth in: CM 1:4 (1 cem
Brick work in arches with 75 class designation brick in cement
mortar 1:3(1 cement: 3 coarse sand)
2x x3.14x0.25 m x0.230x0.10 m = 0.018cum Say 0.02 cum
B/W in plain arches in s/s for span upto 6 m with bricks in CM
1:3
Cement concrete 1:2:4(1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) For benching:
3.14/4x(1.22)2x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61) =0.043 cum
= 0.277 cum
Less pipe : 1.22x3.14/4x(0.15) (-) = 0.0216 cum
= 0.2554 cum Say 0.26 cum
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
For fixing cover : 3.14/4 x d x thickness
0.7854x1.020x1.020x0.15 m =0.123 cum
Less cover 3.14/4x(0.28) x 0.15 m : (-) =
0.037 cum
= 0.086 cum Say 0.09 cum
P/L CC walls string courses, coping, bed blocks, window sills
,etc. up to floor five level
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
3.14x(1.136+0.56)/2x1.216 = 3.241 sqm
3.14x0.56x0.075 = 0.13 sqm
3.14x(1.136) /4-1.136x1/2x3.14x0.15= 1.112 sqm
= 4.483 sqm Say 4.48 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
LABOUR
Extra labour for making channel:
Mason 1st class
Mason 2nd class
S.F.R.C manhole cover and 560 mm dia
Carriage
Sundries

Day
Day
each
L.S.
L.S.

Quantity

Rate

1.18

3888.20

1.29

3508.25

0.02

6384.11

0.26

4514.03

0.09

5272.38

4.48

173.09

0.10
0.10
1.00
6.89
16.90

301.00
273.00
1030.00
1.49
1.49

Page 988 of 2298

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Total:
1122.85

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

1134.08
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 12969.19
Rs 12943.40

Item Code: 19.11.1.2

Constructing brick masonry circular manhole 1.22 m dia. at bottom and 0.56 m dia at top : 1.68 m deep with SFRC cover and frame
(HD20 grade) 560mm internal diameter, total weight not less than 182 Kg With sewer bricks IS: 4885.

Code

04.001.06

06.036.01

06.037

04.001.03

DSR-12

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for 1 manhole
MATERIALS
Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded
stone aggregate 40 mm nominal size)
1.98x1.98x0.30 = 1.178 say 1.18 cum.
P/L CC excluding centering - All work up to plinth level: 1:3:6 1.18
Coarse sand, 40mmstone a
Brick work modular exturded burnt fire ash clay in cement
mortar 1:4(1 cement: 4 coarse sand)
Curved on plan
3.14x1.45x0.24x0.23 = 0.251
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069
= 1.320
Duduct arch ring and portion of pipe
2x x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)^2 x0.230 = 0.008 cum
= 0.026 cum
Net quantity 1.320-0.026 = 1.294 Say 1.29 cum
B/W extruded burnt flyash clay sewer bricks in found and
1.29
plinth CM 1:4
Brick work with modular exturded burnt ash clay
brick in arches cement mortar 1:3(1 cement: 3 coarse sand)
2x1/2x3.14x0.25 m x0.230x0.10 m = 0.018
cum Say 0.02 cum
B/W with modular extruded burnt fly ash clay sewer in arches
in found and plinth in CM 1:3
Cement concrete 1:2:4(1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
For benching:
3.14/4x(1.22)^2 x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)^3 =0.043 cum
= 0.277 cum
Less pipe : 1.22x3.14/4x(0.15)^2 (-) = 0.0216 cum
= 0.2554 cum Say 0.26 cum
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
Cement concrete 1:2:4 (1 cement: 2 coarse
sand : 4 graded stone aggregate 20 mm
nominal size)
For fixing cover : 3.14/4xd^2 x thickness
0.7854x1.020x1.020x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)^2 x 0.15 m : (-) = 0.037 cum
= 0.086 cum Say 0.09 cum

Rate

3888.20

3794.78

0.02

6221.63

0.26

4514.03

Page 989 of 2298

04.002.03

13.009.01

0123
0124
7135
9999
9999

P/L CC walls string courses, coping, bed blocks, window sills

,etc. up to floor five level
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
3.14x(1.136+0.56)/2x1.216 = 3.241 sqm
3.14x0.56x0.075 = 0.13 sqm
3.14x(l.136)^2 /4-1.136x1/2x3.14x0.15 = 1.112 sqm
= 4.483 sqm Say 4.48 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
LABOUR
Extra labour for making channel:
Mason 1st class
Mason 2nd class
S.F.R.C manhole cover and frame 560 mm dia
Carriage
Sundries

Day
Day
each
L.S.
L.S.

0.09

5272.38

4.48

173.09

0.10
0.10
1.00
6.89
16.90

301.00
273.00
1030.00
1.49
1.49
Total:
1122.85

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

1134.08
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 13335.57
Rs 13316.30

Item Code: 19.12.1

Extra depth for circuler type manhole 1.22 m internal dia.
Code

06.001.01

13.009.01

Details of Cost for : 0.61 m

Description
Unit
Quantity
Details of Cost for 0.61m extra depth.
Brick work with bricks of class designation 75
in cement mortar 1:4 (1 cement : 4 coarse sand)
Brick work with F.P.S. bricks of class desgn 75 in foundation Cum
0.66
and plinth in: CM 1:4 (1 cem
12mm cement plaster 1:3 (1 cement :
3 coarse sand) finished with floating coat of
neat cement.
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
2.56
floating coat of neat cement.
Add water charges @ 1% except on [A]+[B] i.e on

Rate

3508.25

173.09
Total:
0.00

Add C.P & OH @15% except on [A]+[B] i.e on

0.00
Cost for 0.61 m
Rate per One Metre:
Rate as per DSR-12:

Rs 4522.23
Rs 4522.30

Item Code: 19.12.2

Extra depth for circuler type manhole 1.22 m internal dia.
Code

06.036.01

DSR-12

Details of Cost for : 0.61 m

Description
Unit
Quantity
Details of Cost for 0.61m extra depth.
Brick work with modular exturded burnt fire clay bricks in
cement montar 1:4 (1 cement : 4 coarse sand)
B/W extruded burnt flyash clay sewer bricks in found and
0.66
plinth CM 1:4

Rate

3794.78

Page 990 of 2298

13.009.01

12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished

with floating coat of neat cement.
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.

2.56

173.09

Add water charges @ 1% except on [A]+[B] i.e on

Total:
0.00

Add C.P & OH @15% except on [A]+[B] i.e on

0.00
Cost for 0.61 m
Rate per One Metre:
Rate as per DSR-12:

Rs 4832.23
Rs 4832.30

Item Code: 19.13.1.1

Constructing brick masonry circular manhole 1.52 Mtr internal dia at bottom and 0.56 m dia. at top : 2.30 m deep with SFRC Cover
and fram e(HD20 grade) 560mm internal diameter, total weight not less than 182 Kg With bricks of class designation 75.

Code

04.001.06

06.001.01

06.009

04.001.03

DSR-12

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for 1 manhole
MATERIALS
Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded
stone aggregate 40 mm nominal size)
2.74x2.74x0.30=2.25cum
P/L CC excluding centering - All work up to plinth level: 1:3:6 - Cum
2.25
Coarse sand, 40mmstone a
Brick work with bricks of class designation 75 in cement
mortar 1:4(1 cement: 4 coarse sand)
Curved on plan
3.14x1.98x0.25x0.46 = 0.716 cum
3.14x(1.98+0.905)/2x0.345xl.93 = 3.019 cum
= 3.735 cum
Duduct arch ring and portion of pipe
2xx3.14x0.25mx0.46x0.10 m = 0.036 cum
2x3.14/4x(0.15)^2 x0.460 = 0.016 cum
= 0.052 cum
Net quantity 3.735-0.052 = 3.683 cum Say 3.68 cum
Brick work with F.P.S. bricks of class desgn 75 in foundation
3.68
and plinth in: CM 1:4 (1 cem
Brick work in arches with 75 class designation brick in cement
mortar 1:3(1 cement: 3 fine sand)
2x1/2x3.14x0.25 m x0.460x0.10 m = 0.036
cum Say 0.04 cum
B/W in plain arches in s/s for span upto 6 m with bricks in CM
0.04
1:3
Cement concrete 1:2:4(1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
For benching:
3.14/4x(l.52)2x0.20 = 0.363 cum
[(2x8.133)/360]x(4/3)x3.14x(0.76)^3 =0.083 cum
= 0.446 cum
Less pipe : 1.52x3.14/4x(0.15)^2 (-) = 0.027 cum
= 0.419 cum Say 0.42 cum
P/L CC excluding centering - All work up to plinth level: 1:2:4 0.42
Coarse sand, 20mmstone a
Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
For fixing cover : 3.14/4 x d^2 x thickness
0.7854x1.020x1.020x0.15 m =0.123 cum

Rate

3888.20

3508.25

6384.11

4514.03

Page 991 of 2298

04.002.03

13.009.01

0123
0124
7135
9999
9999

Less cover 3.14/4x(0.28)^2 x 0.15 m : (-) = 0.037 cum

= 0.086 cum Say 0.09 cum
P/L CC walls string courses, coping, bed blocks, window sills
,etc. up to floor five level
12 mm cement plaster 1:3(1 cement: 3 coarse sand) finished
with floating coat of neat cement
3.14x(1.454+0.56)/2xl.799 = 5.694 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x( 1.454)^2 4-1.454x0.15+1.454x1/2x3.14x
0.15 =1.786 sqm
= 7.61 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
LABOUR
Extra labour for making channel:
Mason 1st class
Mason 2nd class
S.F.R.C cover 560 mm dia HD-20
Carriage
Sundries

Day
Day
each
L.S.
L.S.

0.09

5272.38

7.61

173.09

0.10
0.10
1.00
6.89
16.90

301.00
273.00
1030.00
1.49
1.49
Total:
1122.85

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

1134.08
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 26905.97
Rs 26873.70

Item Code: 19.13.1.2

Constructing brick masonry circular manhole 1.52 Mtr internal dia at bottom and 0.56 m dia. at top : 2.30 m deep with SFRC Cover
and fram e(HD20 grade) 560mm internal diameter, total weight not less than 182 Kg With sewer bricks IS: 4885.

Code

04.001.06

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for 1 manhole
MATERIALS
Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded
stone aggregate 40 mm nominal size)
2.74x2.74x0.30=2.25cum
P/L CC excluding centering - All work up to plinth level: 1:3:6 - Cum
2.25
Coarse sand, 40mmstone a
Brick work with modular exturded burnt fly ash clay bricks in
arches in cement mortar 1:4 (1 cement: 4 coarse sand)

Rate

3888.20

Curved on plan
3.14x1.98x0.25x0.46 = 0.716 cum
3.14x(1.98+0.905)/2x0.345xl.93 = 3.019 cum
= 3.735 cum
Duduct arch ring and portion of pipe

06.036.01

DSR-12

2x / x3.14x0.25mx0.46x0.10 m = 0.036 cum

2x3.14/4x(0.15) x0.460 = 0.016 cum
= 0.052 cum
Net quantity 3.735-0.052 = 3.683 cum Say 3.68 cum
B/W extruded burnt flyash clay sewer bricks in found and
plinth CM 1:4

3.68

3794.78

Page 992 of 2298

06.037

04.001.03

04.002.03

13.009.01

0123
0124
7135
9999
9999

Brick work with modular exturded burnt fly ash clay bricks in
arches in cement mortar 1:3 (1 cement: 3 sand)
2x1/2x3.14x0.25 m x0.460x0.10 m = 0.036 cum
Say 0.04 cum
B/W with modular extruded burnt fly ash clay sewer in arches
in found and plinth in CM 1:3
Cement concrete 1:2:4(1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
For benching:
3.14/4x(1.52) x0.20 = 0.363 cum
[(2x8.133)/360]x(4/3)x3.14x(0.76) =0.083 cum
= 0.446 cum
Less pipe : 1.52x3.14/4x(0.15)K-) = 0.027 cum
= 0.419 cum Say 0.42 cum
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
For fixing cover : 3.14/4 x d thickness
0.7854x1.020x1.020x0.15 m =0.123 cum
Less cover 3.14/4x(0.28) x 0.15 m : (-) = 0.037 cum
= 0.086 cum Say 0.09 cum
P/L CC walls string courses, coping, bed blocks, window sills
,etc. up to floor five level
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
3.14x(1.454+0.56)/2xl.799 = 5.694 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(1.454)^2 4-l. 454x0.15+1.454x1/2x3.14x
0.15 =1.786 sqm
= 7.61 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
LABOUR
Extra labour for making channel :
Mason 1st class
Mason 2nd class
S.F.R.C cover 560 mm dia HD-20
Carriage
Sundries

Day
Day
each
L.S.
L.S.

0.04

6221.63

0.42

4514.03

0.09

5272.38

7.61

173.09

0.10
0.10
1.00
6.89
16.90

301.00
273.00
1030.00
1.49
1.49
Total:
1122.85

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

1134.08
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 27953.91
Rs 27934.70

Item Code: 19.14.1

Extra depth for circuler type manhole 1.52 M internal dia. beyond 2.30 metre: With bricks of class designation 75.

Code

DSR-12

Details of Cost for : 1.88 m

Description
Unit
Quantity
Details of cost for 1.88 m extra depth
Brick work with bricks of class designation 75 in cement
mortar 1:4 (1 cement: 4 coarse sand)

Rate

Page 993 of 2298

06.001.01

13.009.01

Brick work with F.P.S. bricks of class desgn 75 in foundation

and plinth in: CM 1:4 (1 cem
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.

5.26

3508.25

8.99

173.09

Add water charges @ 1% except on [A]+[B] i.e on

Total:
0.00

Add C.P & OH @15% except on [A]+[B] i.e on

0.00
Cost for 1.88 m
Rate per One Metre:
Rate as per DSR-12:

Rs 10643.34
Rs 10643.40

Item Code: 19.14.2

Extra depth for circuler type manhole 1.52 M internal dia. beyond 2.30 metre: With sewer bricks IS: 4885.
Details of Cost for : 1.88 m
Code
Description
Unit
Quantity
Details of cost for 1.88 m extra depth
Brick work with modular exturded burnt fly ash bricks in
cement mortar 1:4 (1 cement: 4 coarse sand)
06.036.01 B/W extruded burnt flyash clay sewer bricks in found and
5.26
plinth CM 1:4
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
8.99
floating coat of neat cement.
Add water charges @ 1% except on [A]+[B] i.e on

Rate

3794.78

173.09
Total:
0.00

Add C.P & OH @15% except on [A]+[B] i.e on

0.00
Cost for 1.88 m
Rate per One Metre:
Rate as per DSR-12:

Rs 11445.01
Rs 11445.10

Item Code: 19.15.1

Providing MS foot rests in manholes with 20 x 20 mm square bar.
Code

1006
9999
0103
0114

04.002.05

0123
0124
0114

DSR-12

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for one M.S foot rests
MATERIALS
M.S. 20 mm square bar 0.75 m @ 3.137 Kg/m
quint
0.024
Carriage painting and other sundries
L.S.
1.82
LABOUR FOR FABRICATION
Black smith (2 nd class)
Day
0.10
Beldar
Day
0.10
Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size)
0.20x0.20x0.10 m = 0.004 cum
P/L CC walls, columns, string courses, coping, bed blocks,
0.004
window sills etc. up to floor f
LABOUR FOR FIXING M.S. FOOT RESTS
Mason 1st class
Day
0.02
Mason 2nd class
Day
0.02
Beldar
Day
0.05

Rate

4250.00
1.49
273.00
247.00

4782.36

301.00
273.00
247.00
Total:

Page 994 of 2298

Add water charges @ 1% except on [A] i.e on

180.54

Add C.P & OH @15% except on [A] i.e on

182.35
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 228.83
Rs 227.95

Item Code: 19.15.2

Providing MS foot rests in manholes With 20 mm dia. round bar.
Code

1003
9999
0103
0114

04.002.05

0123
0124
0114

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for one M.S foot rests
MATERIALS
M.S. round brass20 mm dia 0.75 m @ 2.47kg
quint
0.018
1 m = 0.018 Qq.
Carriage
L.S.
1.82
LABOUR FOR FABRICATION
Black smith (2 nd class)
Day
0.10
Beldar
Day
0.10
Cement concrete 1:3:6 ( 1 cement: 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size)
0.20x0.20x0.10 m = 0.004 cum
P/L CC walls, columns, string courses, coping, bed blocks,
0.004
window sills etc. up to floor f
LABOUR
Mason 1st class
Day
0.02
Mason 2nd class
Day
0.02
Beldar
Day
0.05
Add water charges @ 1% except on [A] i.e on

Rate

4000.00
1.49
273.00
247.00

4782.36

301.00
273.00
247.00
Total:
150.54

Add C.P & OH @15% except on [A] i.e on

152.05
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 193.99
Rs 193.15

Item Code: 19.16

Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12 mm dia steel bar
conforming to IS : 1786.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS
7354
Plastic encapsulated M.S. foot rest 30x20x15
each
1.00
110.00
9999
Carriage and other sundries
L.S.
1.82
1.49
Cement concrete 1:3:6 (0.30x0.20x15 = 0.009 cum)
04.002.05 P/L CC walls, columns, string courses, coping, bed blocks,
0.009
4782.36
window sills etc. up to floor f
LABOUR
0123
Mason 1st class
Day
0.02
301.00
0124
Mason 2nd class
Day
0.20
273.00
0114
Beldar
Day
0.05
247.00
Total:
Add water charges @ 1% except on [A] i.e on
185.68
Add C.P & OH @15% except on [A] i.e on
187.54
Cost for 1.00 No.

DSR-12

Page 995 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 258.71
Rs 256.75

Item Code: 19.17.1

Replacement of MS foot rests in manholes including dismantling concrete blocks: With 20 x 20 mm square bar.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one M.S foot rests
MATERIALS
1006
M.S. 20 mm square bar 0.75 m @ 3.137 Kg/m
quint
0.024
4250.00
=0.024 q
9999
Carriage,painting, and other sundries
L.S.
1.82
1.49
Labour for fabrication
0103
Black smith (2nd class)
Day
0.10
273.00
0114
Beldar
Day
0.10
247.00
Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size)
0.20x0.20x0.10 m = 0.004 cum
04.002.05 P/L CC walls, columns, string courses, coping, bed blocks,
0.004
4782.36
window sills etc. up to floor f
LABOUR for dismantling old fort rest cutting holes and fixing
new M.S. foot rests
0123
Mason 1st class
Day
0.05
301.00
0124
Blacksmith (2nd class)
Day
0.05
273.00
0114
Beldar
Day
0.10
247.00
Total:
Add water charges @ 1% except on [A] i.e on
210.11
Add C.P & OH @15% except on [A] i.e on
212.21
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 263.17
Rs 262.30

Item Code: 19.17.2

Replacement of MS foot rests in manholes including dismantling concrete blocks: With 20 mm diameter round bar.

Code

1003
9999
0103
0114

04.002.05

0123
0124
0114

DSR-12

Description
Details of cost for one MS foot rests
MATERIALS
M.S. roumd bars 20 mm dia 0.75 m @ 2.47 Kg/m =0.018 q
Carriage,painting, and other sundries
Labour for fabrication
Black smith (2 nd class)
Beldar
Cement concrete 1:3:6 ( 1 cement: 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size)
0.20x0.20x0.10 m = 0.004 cum
P/L CC walls, columns, string courses, coping, bed blocks,
window sills etc. up to floor f
LABOUR for dismantling old fort rest cutting holes and fixing
new M.S. foot rests
Mason 1st class
Blacksmith (2nd class)
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

quint
L.S.

0.018
1.82

4000.00
1.49

Day
Day

0.10
0.10

273.00
247.00

0.004

4782.36

0.05
0.05
0.10

301.00
273.00
247.00
Total:

Day
Day
Day

Page 996 of 2298

Add water charges @ 1% except on [A] i.e on

180.11

Add C.P & OH @15% except on [A] i.e on

181.91
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 228.33
Rs 227.45

Item Code: 19.18.1

S/F C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less
than 23 kg.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
1355
CI man-hole cover without frame - 455x610mm - wt 23 kg
each
1.00
980.00
9999

Carriage of C.I. Manhole cover

0114

LABOUR :
Beldar

L.S.

7.15

1.49

Day

0.12

247.00
Total:
1020.29

Add water charges @ 1% on

Add C.P & OH @15% on

1030.49
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1185.06
Rs 1185.05

Item Code: 19.18.2

S/F CI cover without frames : 500 mm dia CI cover (MD) cover not less than 58 Kg
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
1357
C.I. Man-hole cover without frame (medium duty) 500 mm each
1.00
internal diameter
9999
Carriage of C.I. cover
L.S.
13.47
LABOUR
0114
Beldar
Day
0.12
Add water charges @ 1% on

Rate
2210.00
1.49
247.00
Total:
2259.71

Add C.P & OH @15% on

2282.31
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2624.66
Rs 2624.65

Item Code: 19.18.3

S/F CI cover without frames : 560 mm dia CI cover (HD) cover not less than 108 Kg
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
3861
C.I. Man-hole cover without frame (heavy duty) 560 mm each
1.00
internal diameter
9999
Carriage of C. I. cover
L.S.
16.12
LABOUR

DSR-12

Rate
4500.00
1.49

Page 997 of 2298

0114

Beldar

Day

0.12

Add water charges @ 1% on

247.00
Total:
4553.66

Add C.P & OH @15% on

4599.20
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 5289.08
Rs 5289.10

Item Code: 19.19.1.1

P/F in position precast RCC manhole cover and frame : L D - 2.5 : Rectangular shape 600x450 mm internal dimensions.

Code
7130

04.001.03
9999
9999

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS
Precast R.C.C manhole cover and frame 600x450 mm internal each
dimensions
Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 grade
stone aggregate 20 mm nominal size)
1.00x0.85x0.15 = 0.1275 cum
Less cover with frame
0.85x0.70x0.15 = (-) 0.0893 cum
= 0.0382 cum Say 0.04 cum
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
Carriage of R.C.C cover with frame
L.S.
Sundries
L.S.

Rate

1.00

690.00

0.04

4514.03

6.76
13.52

1.49
1.49
Total:
720.21

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

727.41
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1017.08
Rs 1017.10

Item Code: 19.19.1.2

P/F in position precast RCC manhole cover and frame : L D - 2.5 : Square shape 350 mm internal dimensions.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS
7131
R.C.C manhole cover and frame 350 mm square
each
1.00
600.00
9999
Carriage of manhole cover
L.S.
6.76
1.49
Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 grade
stone aggregate 20 mm nominal size)
0.725x0.725x0.15 = 0.0788 cum
Less cover with frame
0.575x0.575x0.15 = (-) 0.0496 cum
= 0.0292 cum Say 0.03 cum
04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.03
4514.03
Coarse sand, 20mmstone a
9999
Sundries
L.S.
13.52
1.49
Total:
Add water charges @ 1% except on [A] i.e on
630.21
Add C.P & OH @15% except on [A] i.e on
636.51
Cost for 1.00 No.

DSR-12

Page 998 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 867.41
Rs 867.40

Item Code: 19.19.1.3

P/F in position precast RCC manhole cover and frame : L D - 2.5 : Circular shape 450 mm internal diameter.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
7132
R.C.C manhole cover and frame 450 mm dia
each
1.00
9999
Carriage of manhole cover
L.S.
6.76
Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 grade
stone aggregate 20 mm nominal size)
3.14/4x(0.775) x0.15 = 0.0708 cum
Less cover with frame
3.14/4x(0.625) x0.15 = (-) 0.0460 cum
= 0.0248 cum Say 0.03 cum
04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.03
Coarse sand, 20mmstone a
9999
Sundries
L.S.
13.52
Add water charges @ 1% except on [A] i.e on

Rate
560.00
1.49

4514.03
1.49
Total:
590.21

Add C.P & OH @15% except on [A] i.e on

596.11
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 820.95
Rs 820.95

Item Code: 19.19.2.1

P/F in position precast RCC manhole cover and frame : M D - 10 : Square shape 500 mm internal dimension.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
7133
R.C.C manhole cover and frame : 450mmx450mm square
each
1.00
9999

04.001.03
9999

Carriage of manhole cover

L.S.
Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 grade
stone aggregate 20 mm nominal size)
0.95x0.95x0.15 =0.1354 cum
Less cover with frame
0.80x0.80x0.15 = (-) 0.096 cum
= 0.0394 cum Say 0.04 cum
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
Sundries
L.S.

Rate
660.00

6.76

1.49

0.04

4514.03

16.64

1.49
Total:
694.86

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

701.81
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 987.64
Rs 987.65

Item Code: 19.19.2.2

P/F in position precast RCC manhole cover and frame : M D - 10 : Circular shape 500 mm internal diameter.

DSR-12

Page 999 of 2298

Code
7134
9999

04.001.03
9999

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS
R.C.C manhole cover and frame 500mm dia
each
Carriage of manhole cover
L.S.
Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 grade
stone aggregate 20 mm nominal size)
3.14/4x(0.95)^2 x0.15 = 0.1064 cum
Less cover wjth frame
3.14/4x(0.8)^2 x0.15 = (-) 0.0754 cum
= 0.031 cum Say 0.03 cum
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
Sundries
L.S.

Rate

1.00
6.76

630.00
1.49

0.03

4514.03

16.64

1.49
Total:
664.86

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

671.51
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 907.66
Rs 907.65

Item Code: 19.19.3.1

P/F in position precast RCC manhole cover and frame : HD - 20 : Circular shape 560 mm internal diameter.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
7135
R.C.C manhole cover and frame 560 mm dia
each
1.00
9999
Carriage of manhole cover
L.S.
13.52
Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 grade
stone aggregate 20 mm nominal size)
3.14/4x(1.05)^2 x0.15 = 0.1299 cum
Less cover with frame
3.14/4x(0.9)^2 x0.15 = (-) 0.0955 cum
= 0.0344 cum Say 0.03 cum
04.001.03 P/L CC excluding centering - All work up to plinth level: 1:2:4 0.03
Coarse sand, 20mmstone a
9999
Sundries
L.S.
20.28
Add water charges @ 1% except on [A] i.e on

Rate
1030.00
1.49

4514.03
1.49
Total:
1080.36

Add C.P & OH @15% except on [A] i.e on

1091.16
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1390.25
Rs 1390.25

Item Code: 19.19.4.1

P/F in position precast RCC manhole cover and frame : EHD - 35 : Circular shape 560 mm internal dia.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
MATERIALS
7136
R.C.C manhole cover and frame 560 mm dia
each
1.00
9999
Carriage of manhole cover
L.S.
13.52
Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 grade
stone aggregate 20 mm nominal size)
3.14/4x(1.05)^2 x0.15 = 0.1299 cum

DSR-12

Rate
1150.00
1.49

Page 1000 of 2298

04.001.03
9999

Less cover with frame

3.14/4x(0.9)^2 x0.15 = (-) 0.0955 cum
= 0.0344 cum Say 0.03 cum
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
Sundries
L.S.

0.03

4514.03

20.28

1.49
Total:
1200.36

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

1212.36
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1529.63
Rs 1529.65

Item Code: 19.20

S/F CI cover 300x300mm w/o frame for gully trap.
Code
1353
9999
0114

Description
MATERIALS
C.I. Cover for gully trap (standard pattern )
Carriage for cover
LABOUR
Beldar

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

each
L.S.

1.00
2.70

200.00
1.49

Day

0.03

247.00
Total:
211.43

Add water charges @ 1% on

Add C.P & OH @15% on

213.54
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 245.57
Rs 245.55

Item Code: 19.21.1

Making connection of drain or sewer line with existing man- hole including breaking. For pipes 100 to 230 mm dia.

Code

04.001.03

13.009.01

0123

DSR-12

Description

Details of Cost for : 1.00 No.

Unit
Quantity

MATERIALS
Cement concrete 1:2:4 mix ( 1 cement: 2
coarse sand : 4 grade stone aggregate 20 mm
nominal size)
= 0.30x0.30x0.23 m = 0.0207 cum
Less pipe = 1/2x3.14x0.23x0.23x0.23 =
0.0096 cum
= 0.0111 cum Say 0.10 cum
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
12 mm cement plaster 1:3 ( 1 cement: 3 coarse
sand ) finished with a floating coat of neat
cement
2x0.35x0.35=0.25
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
LABOUR
(For cutting holes average size 30x30 cm in
23 cm thick wall and making channel etc.)
Mason 1st class
Day

Rate

0.01

4514.03

0.25

173.09

0.12

301.00

Page 1001 of 2298

0124
0114
9999

Mason 2nd class

Beldar
Add for delay sundries etc.

Day
Day
L.S.

0.12
0.25
20.15

Add water charges @ 1% except on [A]+[B] i.e on

273.00
247.00
1.49
Total:
160.65

Add C.P & OH @15% except on [A]+[B] i.e on

162.26
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 275.01
Rs 275.00

Item Code: 19.21.2

Making connection of drain or sewer line with existing man- hole including breaking. For pipes 250 to 300 mm dia.

Code

04.001.03

13.009.01

0123
0124
0114
9999

Description
Details of cost for one connection
MATERIALS
Cement concrete 1:2:4 mix ( 1 cement: 2 coarse sand : 4
grade stone aggregate 20 mm nominal size)
= 0.35x0.35x0.30 m = 0.037 cum
Less pipe = 1/2x3.14x0.30x0.30x0.30 = 0.021 cum
= 0.016 cum Say 0.02 cum
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
12 mm cement plater 1:3(1 cement: 3 coarse sand ) finished
with a floating coat of neat cement
2x0.40x0.40 =0.32
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
LABOUR
(For cutting holes average size 30x30 cm in 23 cm thick wall
and making channel etc.)
Mason 1 st class
Mason 2nd class
Beldar
Add for delay sundries etc.

Details of Cost for : 1.00 No.

Unit
Quantity

Day
Day
Day
L.S.

Rate

0.02

4514.03

0.32

173.09

0.12
0.12
0.25
20.67

301.00
273.00
247.00
1.49
Total:
161.43

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

163.04
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 333.17
Rs 333.15

Item Code: 19.21.3

Making connection of drain or sewer line with existing man- hole including breaking. For pipes 350 to 450 mm dia.

Code

DSR-12

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for one connection
MATERIALS
Cement concrete 1:2:4 mix ( 1 cement: 2 coarse sand : 4
grade stone aggregate 20 mm nominal size)
= 0.50x0.50x0.30 m = 0.075 cum
Less pipe = 1/2x3.14x0.45x0.45x0.30 = 0.048 cum

Rate

Page 1002 of 2298

04.001.03

13.009.01

0123
0124
0114
9999

= 0.027 cum Say 0.03 cum

P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
12 mm cement plater 1:3(1 cement: 3 coarse sand ) finished
with a floating coat of neat cement
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
Rate as per item no 13.9.1 of SH : Finishing
LABOUR
(For cutting holes average size 30x30 cm in 23 cm thick wall
and making channel etc.)
Mason 1st class
Mason 2nd class
Beldar
Add for delay sundries etc.

Day
Day
Day
L.S.

0.03

4514.03

0.60

173.09

0.16
0.16
0.33
26.91

301.00
273.00
247.00
1.49
Total:
213.45

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

215.58
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 487.19
Rs 487.20

Item Code: 19.22.1

Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole:- 100 mm dia.
sand cast iron drop connection.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one drop connection
MATERIALS
1617
100 mm diameter sand cost iron pipe =
each
0.55556
990.00
38+30+33 =101 cm say 1 metre
=1/1.8 pipes = 0.55556nos
9999
Carriage of pipe
L.S.
1.43
1.49
Cutting charges
18.083.02 Labour for cutting C.I. pipe with steel saw : 100 mm diametre
3.00
55.65
C.I. pipe.
water supply
1336
Cleaning eye with chain and lid
each
1.00
44.00
1621
Sand cast iron bend plain
each
1.00
210.00
1628
Sand cast iron tee
each
1.00
310.00
Brick work in cement mortar 1:4(1 cement: 4 coarse sand)

06.001.01

DSR-12

0.20x0.20x0.23 = 0.009 cum

Less pipe 1/2x3.14x0.10x0.10x0.23 = 0.002 cum
= 0.007 cum
Brick work with F.P.S. bricks of class desgn 75 in foundation
and plinth in: CM 1:4 (1 cem
Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded
stone aggregate 40 mm nominal size)
0.40x0.45x1.05 m = 0.189 cum
0.40x0.25x0.40 = 0.040 cum
= 0.229 cum
Less pipe portion
1/2x3.14x0.10x0.10x1.50 = 0.012 cum
Toothing portion
2x0.40x0.05x0.10 m = 0.004 cum
= 0.016 cum

0.007

3508.25

Page 1003 of 2298

04.001.11

13.009.01

12.039.01
9999

05.009.02
9999

0123
0124
0114

Net 0.229-0.016 = 0.213 cum Say 0.21 cum

P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
1x0.25x0.25 m = 0.0625-S.ay 0.06 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
Providing lead caulked joints to 100 mm diameter pipe and
special
Providing lead caulked joints to SCI RWP and fittings: 100 mm
dia. pipe.
Providing joint to S.W. pipe with cement mortar 1:1(1 L.S.
cement: 1 fine sand)
Form work
1.30x1.05 m= 1.36 sqm
Centering & shuttering including strutting, propping etc. Walls including attached pilas
Sundries including carriage of bends etc.
L.S.
LABOUR
For cutting holes 5 cm deep in alternate course of brick work
benching and channel
Mason 1st class
Day
Mason 2nd class
Day
Beldar
Day

0.21

3087.47

0.06

173.09

4.00

207.85

26.91

1.49

1.36

285.14

26.91

1.49

0.70
0.70
2.70

301.00
273.00
247.00
Total:
2265.03

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

2287.68
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 4700.29
Rs 4700.30

Item Code: 19.22.2

Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole:- 150 mm dia.
sand cast iron drop connection.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS
150 mm diameter sand cost iron pipe =
1618
34.5+30+37 =101.5cm say 1.00m
each
0.55556
1630.00
9999
Carriage of pipe
L.S.
1.82
1.49
Cutting charges
18.083.04 Labour for cutting C.I. pipe with steel saw : 150 mm diametre
3.00
104.70
C.I. pipe.
water supply
1337
Cleaning eye with chain and lid
each
1.00
50.00
1622
Sand cast iron bend plain
each
1.00
470.00
7087
Sand cast iron tee
each
1.00
505.00
Brick work in cement mortar 1:4(1 cement: 4 coarse sand)

06.001.01

DSR-12

0.20x0.20x0.23 = 0.009 cum

Less pipe 1/2x3.14x0.15x0.15x0.23 = 0.004 cum
= 0.005 cum
Brick work with F.P.S. bricks of class desgn 75 in foundation
and plinth in: CM 1:4 (1 cem
Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded
stone aggregate 40 mm nominal size)

0.005

3508.25

Page 1004 of 2298

04.001.11

13.009.01

12.039.02
9999

05.009.02
9999

0123
0124
0114

0.45x0.50x1.15 m = 0.259 cum

0.45x0.25x0.45 = 0.0510 cum
= 0.310 cum
Less pipe portion
1/4x3.14x0.15x0.15x1.50 = 0.027 cum
Toothing portion
3x0.45x0.05x0.10 m = 0.004 cum
= 0.031 cum
Net 0.310-0.031 = 0.279 cum Say 0.28 cum
P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag
12 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
1x0.25x0.25m = 0.0625 Say 0.06 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
Providing lead caulked joints to 150 mm diameter pipe and
special
Providing lead caulked joints to SCI RWP and fittings: 150 dia.
pipe.
Providing joint to S.W. pipe with cement mortar 1:1 (1 L.S.
cement: 1 fine sand)
Form work
1.450x1.15 m= 1.67 sqm
Centering & shuttering including strutting, propping etc. Walls including attached pilas
Sundries including carriage of bends etc.
L.S.
LABOUR
For cutting holes 45 holes 5 cm deep toothing in alternate
course of brick work benching and making channel
Mason 1st class
Mason 2nd class
Beldar

Day
Day
Day

0.28

3087.47

0.06

173.09

4.00

287.10

39.91

1.49

1.67

285.14

34.06

1.49

0.85
0.85
3.50

301.00
273.00
247.00
Total:
3395.89

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

3429.85
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 6775.43
Rs 6775.45

Item Code: 19.23.1

Extra for depths beyond 60 cm of sand cast iron drop connection complete : For 100 mm dia. sand cast iron drop connection.

Code
1617
9999

DSR-12

Description

Details of Cost for : 1.00 m

Unit
Quantity

MATERIALS
100 mm diameter sand cost iron pipe 1 meter
each
Carriage of materials and fixing charges
L.S.
Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded
stone aggregate 40 mm nominal size)
0.40x0.45x1.00 mm = 0.18 cum .
Less pipe portion
1/2x3.14x0.10x0.10x1.00 = 0.008 cum
Toothing portion
5x0.40x0.05x0.10 m = 0.010 cum
= 0.018 cum

0.55556
13.39

Rate
990.00
1.49

Page 1005 of 2298

04.001.11

05.009.02
9999

0123
0124
0114

Net 0.18-0.018 = 0.162 cum Say 0.16 cum

P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag
Form work
1.30x1.00 m= 1.30 sqm
Centering & shuttering including strutting, propping etc. Walls including attached pilas
Sundries
L.S.
LABOUR
For cutting holes 5 cm deep in alternate course of brick work
Mason lstclass
Mason 2nd class
Beldar

Day
Day
Day

0.16

3087.47

1.30

285.14

7.15

1.49

0.04
0.04
0.04

301.00
273.00
247.00
Total:
613.44

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

619.57
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1577.19
Rs 1577.20

Item Code: 19.23.2

Extra for depths beyond 60 cm of sand cast iron drop connection complete : For 150 mm dia. sand cast iron drop connection.

Code
1618
9999

04.001.11

05.009.02
9999

0123
0124
0114

Description

Details of Cost for : 1.00 m

Unit
Quantity

MATERIALS
150 mm diameter sand cost iron pipe 1 meter
each
Carriage of materials and fixing charges
L.S.
Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded
stone aggregate 40 mm nominal size)
0.45x0.50x1.00 mm = 0.225 cum
Less pipe portion
1/2x3.14x0.15x0.15x1.00 = 0.018 cum
Toothing portion
5x0.45x0.05x0.10 m = 0.011 cum
= 0.029 cum
Net 0.225-0.029 = 0.196 cum Say 0.20 cum
P/L CC excluding centering - All work up to plinth level: 1:5:10 Fine sand, 40mmstone ag
Form work
1.45x1.00 m= 1.45 sqm
Centering & shuttering including strutting, propping etc. Walls including attached pilas
Sundries
L.S.
LABOUR
For cutting 5 cm deep in alternate course of brick work
Mason 1st class
Day
Mason 2nd class
Day
Beldar
Day

Rate

0.55556
13.39

1630.00
1.49

0.20

3087.47

1.45

285.14

8.09

1.49

0.05
0.05
0.05

301.00
273.00
247.00
Total:
978.61

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

988.40
Cost for 1.00 m
Rate per One Metre:

DSR-12

Rs 2167.60

Page 1006 of 2298

Rate as per DSR-12:

Rs 2167.60

Item Code: 19.24.1

Dismantling of manhole i/c R.C.C. top slab, C.I cover with frame. Rectangular manhole 90x80cm and 45 cm deep.

Code

15.002.02

15.007.04

15.002.01

15.003
9999

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost of a manhole 90x80 and 45 cm deep
Dismantling of cement concrete 1:4:8 (1 cement: 4 coarse
sand 8 : aggregate stone 40 mm nominal size)
1.51x1.41x0.20 m = 0.426 cum Say 0.43 cum
Demolishing cement concrete: 1 : 4 : 8 or leaner.
0.43
Dismantling of second class brick work in Cement mortar 1:4
(1cement : 4 coarse sand)
4.32x0.23x0.35 m =0.348 cum
Less for pipe 2x3.14x(0.15m)^2 x0.23m = (-) 0.008 cum
= 0.340 cum
Demolishing brick work : In cement mortar.
0.34
Dismantling cement concrete 1:2:4 ( 1 cement : 2 coarse sand
: 4 graded stone aggregate 20 mm nominal size)
For benching 2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum
Less for pipe 1x0.90x3.14/4x(0.15m) = (-) 0.02 cum
= 0.16 cum
Demolishing cement concrete: 1 : 3 : 6 or richer.
0.16
Dismantling of R.C.C slab of 1:2:4 (1 cement: 2 coarse sand : 4
grade stone aggregate 20 mm nominal size)
For slab : 1.36x1.26x0.15m = 0.257 cum
Less for cover 0.61x0.455x0.15m = (-) 0.042 cum
= 0.215 cum Say 0.22 cum
Demolishing R.C.C. work.
0.22
Removal of C.I. Cover with frame
L.S.
7.15
Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Rate

413.63

566.58

671.05

978.97
1.49
Total:
10.65

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

10.76
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 705.61
Rs 705.60

Item Code: 19.24.2

Dismantling of manhole i/c R.C.C. top slab, C.I cover with frame. Rectangular manhole 120x90cm and 90 cm deep.

Code

15.002.02

15.007.04

DSR-12

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost of a manhole 120x90 and 90 cm deep
Dismantling of cement concrete 1:4:8 (1 cement: 4 coarse
sand 8 : aggregate stone 40 mm nominal size)
1.81x1.51x0 20 m = 0.547 cum Say 0.55 cum
Demolishing cement concrete: 1 : 4 : 8 or leaner.
0.55
Dismantling of second class brick work in cement mortar 1 :4
(1 cement : 4 coarse sand)
5.12x0.23x0.30m = 0.942 cum
Less for pipe 2x3.14x(0.15m)^2 x0.23 m = (-) 0.008 cum
= 0.934 cum Say 0.93 cum
Demolishing brick work : In cement mortar.
0.93
Dismantling cement concrete 1:2:4 ( 1 cement : 2 coarse sand
: 4 graded stone aggregate 20 mm nominal size)

Rate

413.63

566.58

Page 1007 of 2298

15.002.01

15.003
9999

2x1.20x0.90x(0.80/2) x (0.30+0.20)/2 = 2.70 cum

Less for pipe 1.20x3.14/4x(0.15m)^2 = (-) 0.021 cum
= 0.249 cum say 0.25
Demolishing cement concrete: 1 : 3 : 6 or richer.
Dismantling of R.C.C slab of 1:2:4 (1 cement: 2 coarse sand : 4
grade stone aggregate 20 mm nominal size)
For slab : 1.66x 1.36x0.15m = 0.339 cum
Less for cover 0.7854x(0.50 (0.15m)^2 = (-) 0.029 cum
= 0.31 cum
Demolishing R.C.C. work.
Removal of C.I. Cover with frame
L.S.

0.25

671.05

0.31
7.15

978.97
1.49
Total:
10.65

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

10.76
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1238.03
Rs 1238.05

Item Code: 19.24.3

Dismantling of manhole i/c R.C.C. top slab, C.I cover with frame. Rectangular arch type man hole 140 x 90 cm and 2.45 mtr deep.

Code

15.002.02

15.007.04

15.002.01

15.003
9999
9999

DSR-12

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost of a manhole 140x90 and 2.45 m deep
Dismantling of cement concrete 1:4:8 (1 cement: 4 coarse
sand 8 : aggregate stone 40 mm nominal size)
2.16m x1.66m x 0.20m = 0.72 cum
Demolishing cement concrete: 1 : 4 : 8 or leaner.
0.72
Dismantling of second class brick work in cement mortar 1:4
(1 cement: 4 coarse sand)
Brick work in item 5.52mx0.23mx1.20m = 1.524 cum
3.92mx0.23mx1.15m= 1.037 cum
= 2.561 cum
Deduct arch ring and portion of pipe
2x 1/2 x3.14x0.25mx0.23x0.1m = 0.018 cum
2x3.14/4(0.15)^2 xO.23m = 0.008 cum = (-) 0.026 cum
Net 2.561 - 0.026 = 2.535 cum Say 2.54 cum
Brick work in arch
x3.14x1.13x0.80x0.23m = 0.327 cum
2x x3.14x0.25mx0.23x0.1m = 0.018 cum
= 0.345 cum Say 0.35 cum
Net = 2.54+0.35 = 2.89 cum
Demolishing brick work : In cement mortar.
2.89
Dismantling cement concrete 1:2:4 ( 1 cement: 2 coarse sand
: 4 graded stone aggregate 20 mm nominal size)
2x1.4x0.90/2x(0.20+0.30)/2 = 0.315 cum
Less pipe 1.4x3.14/4x(0.15)^2 = (-) 0.025 cum
= 0.290 cum
Demolishing cement concrete: 1 : 3 : 6 or richer.
0.29
Dismantling of R.C.C slab of 1:2:4 (1 cement: 2 coarse sand : 4
grade stone aggregate 20 mm nominal size)
1.36mx1.06mx0.15 = 0.216 cum
Less cover 3.14x(0.25)^2 x0.15 = (-) 0.029 cum
= 0.187 cum Say 0.19 cum
Demolishing R.C.C. work.
0.19
Removal of C.I. Cover with frame
L.S.
7.15
Removal of M.S foot rest
L.S.
8.06

Rate

413.63

566.58

671.05

978.97
1.49
1.49

Page 1008 of 2298

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total:
22.66

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

22.89
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2342.15
Rs 2342.20

Item Code: 19.24.4

Dismantling of manhole i/c R.C.C. top slab, C.I cover with frame. Circular manhole 122 cm dia. and 1.68 M deep.

Code

15.002.01

15.007.04

15.002.01
9999
9999

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost of a manhole 1.22 in internal diameter 1.68m
deep
Dismantling of cement concrete 1:3:6 (1 cement: 3 coarse
sand : 6 aggregate stone 40 mm nominal size)
1.98mx1.98mx0.30m=1.178cum say 1.18cum
Demolishing cement concrete: 1 : 3 : 6 or richer.
Cum
1.18
Dismantling of second class brick work in cement mortar 1:4
(1 cement: 4 coarse sand)
Curved on plan
3.14x1.45x0.24x0.23= 0.251
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069
= 1.320
Deduct arch ring and portion of pipe
2x x3.14x0.25mx0.23x0.10m = 0.018 cum
2x3.14/4(0.15)^2 x0.23m = 0.008 cum
= 0.026 cum
Net quantity 1.320 - 0.026 = 1.294 Say 1.29 cum
Brick work in arches
2 x x3.14x0.25mx0.230x0.10m = 0.018
cum say 0.02 cum
Total = 1.294+0.02 = 1.314 cum say 1.131 cum
Demolishing brick work : In cement mortar.
1.31
Dismantling cement concrete 1:2:4 ( 1 cement: 2 coarse sand
: 4 graded stone aggregate 20 mm nominal size)
For benching
3.14/4x(1.22)^2 x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)^3 = 0.043 cum
= 0.277 cum
Less pipe:1.22x3.14/4x(0.15)^2 (-)=0.0216cum
= 0.2554 cum say 0.26 cum
In cover fixing 0.7854x1.020x1.020x0.15m
= 0.123 cum
Less cover 3.14/4x(0.28)^2 x0.15m : (-) = 0.037 cum
= 0.086 cum say 0.09 cum
Total = 0.26 + 0.09 = 0.35 cum
Demolishing cement concrete: 1 : 3 : 6 or richer.
0.35
Removal of S.F.R.C Cover with frame size
L.S.
7.15
560 mm diameter (medium duty)
Removal of M.S foot rests
L.S.
8.06
Add water charges @ 1% except on [A]+[B]+[C] i.e on

Rate

671.05

566.58

671.05
1.49
1.49
Total:
22.66

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

22.89
Cost for 1.00 No.

DSR-12

Page 1009 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 1795.25
Rs 1795.30

Item Code: 19.25.1

Extra for depth of manholes dismantled : Rectangular manhole 90x80 cm and 45 cm deep.
Details of Cost for : 1.00 m
Code
Description
Unit
Quantity
Dismantling of second class brick work in cement mortar 1:5
(1 Cement: 5 fine sand)
4.32x0.23x1.0m = 0.994 cum Say 0.99 cum
15.007.04 Demolishing brick work : In cement mortar.
Cum
0.99
9999
Removing of M.S. foot rests
L.S.
1.82
Add water charges @ 1% except on [A] i.e on

Rate

566.58
1.49
Total:
2.71

Add C.P & OH @15% except on [A] i.e on

2.74
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 564.06
Rs 564.10

Item Code: 19.25.2

Extra for depth of manholes dismantled : Rectangular manhole 120x90 cm and 90 cm deep.
Details of Cost for : 1.00 m
Code
Description
Unit
Quantity
Details of cost for one metre
Dismantling of second class brick work in cement mortar 1:5
(1 Cement: 5 fine sand)
5.12x0.23x1.0m = 1.178 cum Say 1.18 cum
15.007.04 Demolishing brick work : In cement mortar.
1.18
9999
Removing of M.S. foot rests
L.S.
1.82
Add water charges @ 1% except on [A] i.e on

Rate

566.58
1.49
Total:
2.71

Add C.P & OH @15% except on [A] i.e on

2.74
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 671.71
Rs 671.75

Item Code: 19.25.3

Extra for depth of manholes dismantled : Rectangular arch type manhole 140 x 90 cm and 2.45 m deep (upto 4.25 m depth).

Code

DSR-12

Details of Cost for : 1.80 m

Description
Unit
Quantity
Details of cost of dismantling one manhole 4.25m deep
Dismantling Ilnd class brick work in cement mortar 1:4(1
Cement: 4 Coarse sand) for 2.45 depth
Qty for 2.45m depth 5.52x0.23x1.20=1.524cum
3.92mx0.23mxl.l5m= 1.037 cum
Total= 2.561 cum
Deduct arch ring and portion of pipe
2x 1/2 x3.14x0.25mx0.23x0.1 m = 0.018 cum
2x3.14/4(0.15) 1x0.23m = 0.008 cum
Total deduction= (-) 0.026 cum
Net 2.561 - 0.026 = 2.535 cum Say 2.54 cum
Qty in arch

Rate

Page 1010 of 2298

15.007.04

15.002.01

1/2 x3.14xl.l3x0.80x0.23m = 0.327 cum

2x1/2 x3.14xO.25mx0.23x0.1m = 0.018 cum
Total= 0.345 cum Say 0.35 cum
Total for 2.45 m depth 2.54 + 0.35 = 2.89 cum
Qty for 4.25m depth
5.52mx0.23mx1.20m= 1.524 cum
3.92mx0.23mx2.95m = 2.660 cum
Total= 4.184 cum
Deduct arch ring and portion of pipe
2x 1/2x3.14x0.70mx0.23x0.1m = 0.051 cum
2x3.14/4x(0.60)^2 x 0.230 = 0.130 cum
Total deduction= (-) 0.181 cum
Net 4.184 - 0.181 = 4.003 cum Say 4.00 cum
Qty in arch
1/2 x3.14xl.l3x0.80x0.23m = 0.327 cum
2x /2x3.14x0.70mx0.23x0.1m = 0.051 cum
Total= 0.378 cum Say 0.38 cum
Total for 4.25 m depth =4.38 cum
Net difference = 4.38 - 2.89 = 1.49 cum
Demolishing brick work : In cement mortar.
Dismantling cement concrete 1:2:4 (1 Cement : 2 coarse sand
: 4 graded stone aggregate 40mm nominal size)
(Qty for 4.25m depth
2x1.4x(0.90/2)x(0.65+0.75)/2 = 0.882 cum
Less pipe :1.4x3.14/4x(0.60 = (-) 0.396 cum
= 0.486 cum Say 0.49 cum
Qty for 2.45m depth
2x1.4x(0.90/2)x(0.20+0.30)/2 = 0.315 cum
Less pipe : 1.4x3.14/4x(0.15) =(-) 0.025 cum
= 0.290 cum Say 0.29 cum
Net difference = 0.49 - 0.29 = 0.20 cum
Demolishing cement concrete: 1 : 3 : 6 or richer.
Cum

1.49

566.58

0.20

671.05
Total:
0.00

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

0.00
Cost for 1.80 m
Rate per One Metre:
Rate as per DSR-12:

Rs 543.56
Rs 543.60

Item Code: 19.25.4

Extra for depth of manholes dismantled : Circular manhole 122 cm dia and 1.68 M deep (upto 2.29 M depth).
Details of Cost for : 0.61 m
Code
Description
Unit
Quantity
Rate
Details of cost of dismantling one manhole 2.29m deep
Dismantling cement concrete 1:3:6(1 Cement : 3 coarse sand :
6 graded stone aggregate 40mm nominal size)
1.98x1.98x0.30 = 1.178 cum. Say 1.18 cum
15.002.01 Demolishing cement concrete: 1 : 3 : 6 or richer.
1.18
671.05
Dismantling IInd class brick work in cement mortar 1:4 (1
Cement: 4 Coarse sand)
Curved on plan
3.14x1.45x0.85x0.23=0.891
3.14x(1.45+0.79)/2x 1.32x0.23 = 1.069 = 1.96
Duduct arch ring and portion of pipe
2x1/2x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)^2 x 0.230 = 0.008 cum
Total deduction = 0.026 cum ,

DSR-12

Page 1011 of 2298

15.007.04

15.002.01
9999
9999
19.024.04

Net quantity 1.96-0.026 = 1.934 Say 1.93 cum

Qty in arch
2x1/2x3.14x0.25 m x0.230x0.10 m = 0.018
cum Say 0.02 cum
Total =1.93+ 0.02= 1.97 cum
Demolishing brick work : In cement mortar.
Dismantling and demolishing
Dismantling cemnet concrete 1:2:4 ( 1 cement : 2 coarse sand
: 4 graded stone aggregate 20 mm nominl size )
For benching:
3.14/4x(1.22)^2 x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)^3 =0.043 cum
= 0.277 cum
Less pipe : 1.22x3.14/4x(0.15)^2 (-) = 0.0216 cum
Net qty= 0.2554 cum Say 0.26 cum
For fixing cover : 3.14/4 xd^2 xthickness
0.7854x1.020x1.020x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)^2 x 0.15 m : (-) = 0.037 cum
Net qty = 0.086 cum Say 0.09 cum
Total = 0.26 + 0.09 = 0.35 cum
Demolishing cement concrete: 1 : 3 : 6 or richer.
Removal of SFRC cover
Removal of M.S. foot rests
Dismantling of manhole i/c R.C.C. top slab, C.I cover with
frame. Circular manhole 122 cm

Cum

1.97

566.58

L.S.
L.S.
Nos

0.35
7.15
8.09
-1.00

671.05
1.49
1.49
1795.25

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total:
22.70

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

22.93
Cost for 0.61 m
Rate per One Metre:
Rate as per DSR-12:

Rs 613.10
Rs 613.10

Item Code: 19.26.1

Raising manhole cover and frame slab to required level. Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of
grade LD - 2.5 .
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one manhole
Dismantling of R.C.C slab of 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggegate 20mm nominal size)
= 1.36x1.26x0.15=0.257cum
Less cover with frame portion
0.85 x 0.70 x 0.15 = (-)0.089 cum
Net Qty = 0.168 cum Say 0.17 cum
15.003
Demolishing R.C.C. work.
Cum
0.17
978.97
9999
Remaval of RCC cover and frame
L.S.
7.15
1.49
R.C.C work 1:2:4 (1 cement : 2 coarse sand : graded stone
aggregate 20mm nominal size
For raised slab - 1.36x1.26x0.15 =0.257cum
Less portion cover with frame
=0.85x0.70x0.15=(-)0.089cum
Net Qty =0.168cum Say 0.17cum
05.003

DSR-12

RCC in beams, suspended floors, staircases, etc upto floor 5 Cum

level excldg centering, shutt
Form work = 0.90x0.80 = 0.72sqm

0.17

5494.55

Page 1012 of 2298

Less Cover = 0.60x0.45= (-)0.27 sqm

Net Qty = 0.045sqm

05.009.03
9999

Centering & shuttering including strutting, propping etc. - Sqm

Suspended floors, roofs, landi
Sundries
L.S.

0.45

311.22

13.52

1.49
Total:
30.79

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

31.10
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1276.30
Rs 1239.70

Item Code: 19.26.2

Raising manhole cover and frame slab to required level. Rectangular manhole 120x90cm with circular cover 500 mm dia of grade
MD-10.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one manhole
Dismantling of R.C.C slab of 1:2:4 (1 cement: 2 coarse sand : 4
aggregate stone 20 mm nominal size) 1.66x1.16x0.15 =0.339

15.003
9999

05.003

05.009.03
9999

Less for RCC cover with frame

3.14/44x(0.80)2x0.15=(-)0.075 cum
Net qty 0.264 cum Say 0.26 cum
Demolishing R.C.C. work.
Removal of R.C.C cover and frame
L.S.
R.C.C work 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size
1.66x1.36x0.15 = 0.339 cum
Less portion cover with frame
= 314/4x0.80x0.80x0.15 =(-) 0.075 cum
Net qty= 0.264 cum Say 0.26 cum
RCC in beams, suspended floors, staircases, etc upto floor 5
level excldg centering, shutt
Form work = 1.2x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.50)^2 =(-) 0.196 sqm
Net qty = 0.884 sqm Say 0.88 sqm
Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi
Sundries
L.S.

0.26
7.15

978.97
1.49

0.26

5494.55

0.88

311.22

16.64

1.49
Total:
35.44

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

35.79
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1998.14
Rs 1942.20

Item Code: 19.26.3

Raising manhole cover and frame slab to required level. Rectangular manhole 120x90cm with circular cover 560 mm dia of grade
HD-20.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate

DSR-12

Page 1013 of 2298

15.003
9999

05.003

05.009.03
9999

Details of cost for one manhole

Dismantling of R.C.C slab of 1:2:4 (1 cement: 2 coarse sand : 4
aggregate stone 20 mm nominal size)
1.66x1.36x0.15 = 0.339 cum
Less for RCC cover with frame
3.14/4x(0.90jfcx0.15 =(-) 0.095 cum
Net qty 0.244 cum Say 0.24 cum
Demolishing R.C.C. work.
Removal of R.C.C cover and frame
L.S.
R.C.C work 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
1.66x1.36x0.15 = 0.339 cum Less portion cover with frame
= 3.14/4x0.90x0.90x0.15 =(-) 0.095 cum
Net qty = 0.244 cum Say 0.24 cum
RCC in beams, suspended floors, staircases, etc upto floor 5
level excldg centering, shutt
Form work = 1.2x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.56)^2 =(-) 0.246 sqm
Net qty = 0.834 sqm Say 0.83 sqm
Centering & shuttering including strutting, propping etc. Suspended floors, roofs, landi
Sundries
L.S.

0.24
7.15

978.97
1.49

0.24

5494.55

0.83

311.22

20.28

1.49
Total:
40.87

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

41.28
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1859.42
Rs 1807.75

Item Code: 19.26.4

Raising manhole cover and frame slab to required level. Circular manhole 140cm dia with circular cover 600 mm dia of grade EHD35
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one manhole
Dismantling of C.C slab of 1:2:4 (1 cement: 2 coarse sand : 4
aggregate stone 20 mm nominal size)
=3.14/4x(0.985)^2 x 0.15 = 0.114 cum

15.003
9999

04.002.03
9999

Less for RCC cover with frame

3.14/4x(0.90)^2x0.15 =(-) 0.095 cum
Net qty 0.019 cum Say 0.02 cum
Demolishing R.C.C. work.
Removal of R.C.C cover and frame
L.S.
C.C work 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
=3.14/4x(0.985)^2x0.15 = 0.114 cum
Less portion cover with frame
= 3.14/4x0.90x0.90x0.15 =(-) 0.095 cum
Net qty = 0.019 cum Say 0.02 cum
P/L CC walls string courses, coping, bed blocks, window sills Cum
,etc. up to floor five level
Sundries
L.S.

0.02
8.06

978.97
1.49

0.02

5272.38

20.28

1.49
Total:
42.23

Add water charges @ 1% except on [A]+[B] i.e on

DSR-12

Page 1014 of 2298

Add C.P & OH @15% except on [A]+[B] i.e on

42.65
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 174.08
Rs 169.75

Item Code: 19.27.1

Constructing brick masonry road gully chamber 50 x 45 x 60 cm with bricks of class designation 75 in C.M 1:5 : With F.P.S. bricks.

Code

04.001.11

06.001.01

13.009.01

04.002.03

05.009.02
7380
9999
9999

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for one chamber
MATERIALS
Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded
stone aggregate 40 mm nominal size) 1.11x1.06x0.15=0.176
say 0.18cum
P/L CC excluding centering - All work up to plinth level: 1:5:10 0.18
Fine sand, 40mmstone ag
Brick work in bricks of clas designation 75 in cement mortar
1:4(1 cement: 4 coarse sand)
2.82 m x 0.23m x0.45 m = 0.29 cum
Brick work with F.P.S. bricks of class desgn 75 in foundation
0.29
and plinth in: CM 1:4 (1 cem
12 mm cement plaster 1:3(1 cement: 3 coarse sand) finished
with floating coat of neat cement
Wall: 1.90x0.45 m = 0.855 sqm
Bed : 0.45x0.50 m = 0.225 sqm Total= 1.080 sqm
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
1.08
floating coat of neat cement.
Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
2.82x0.23x0.15 m = 0.097 cum Say 0.10 cum
P/L CC walls string courses, coping, bed blocks, window sills
0.10
,etc. up to floor five level
Form work
3.50x0.15 m = 0.525 sqm Say 0.53 sqm
Centering & shuttering including strutting, propping etc. 0.53
Walls including attached pilas
Precast R.C.C.gully grating with frame
each
1.00
500x450 mm
Carriage of R.C.C. grating
L.S.
7.15
Fixing R.C.C. grating
L.S.
5.33
Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E] i.e on

Rate

3087.47

3508.25

173.09

5272.38

285.14
650.00
1.49
1.49
Total:
668.59

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E] i.e on

675.28
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 3215.00
Rs 3193.50

Item Code: 19.28.1

Constructing brick masonry road gully chamber 45 x 45 x 77.5 cm with bricks of class designation 75 in C.M 1 : 5: With F.P.S bricks.

Code

DSR-12

Description

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

Page 1015 of 2298

04.001.11

06.001.01

13.009.01

04.002.03

05.003

0155
05.009.02

05.022.01

7381
9999

Details of cost for one chamber

Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded
stone aggregate 40 mm nominal size)
1.06mxl.1.06mx0.15 m= 0.17 cum Say .17 cum
P/L CC excluding centering - All work up to plinth level: 1:5:10 - Cum
Fine sand, 40mmstone ag
Brick work in bricks of class designation 75 in cement mortar
1:4(1 cement: 4 coarse sand)
2.72 m x 0.23m x0.70 m = 0.438 cum
Deduct opening 0.45x0.23x0.10 m = 0.01 cum
Block 3x(0.075)^3 = 0.001 cum
Total deduction= 0.011 cum
Net qty. = 0.438 (-) 0.011 = 0.427 cum Say 0.43 cum
Brick work with F.P.S. bricks of class desgn 75 in foundation
and plinth in: CM 1:4 (1 cem
12 mm cement plaster 1:3 ( 1 cement: 3 coarse sand) finished
with floating coat of neat cement
Wall: 1.80x0.70 m= 1.26 sqm
Bed : 0.45x0.45 m = 0.202 sqm
Top : 0.45x0.20 m = 0.09 sqm
Sides: 2x0.20x0.10 m = 0.04 sqm
Total= 1.592 sqm Deduct opening
0.45x0.10 m = 0.045 sqm
Net qty. = 1.592 (-) 0.045 = 1.547 cum Say
1.55 cum
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
Block = 3 (0.75)^3 = 0.001 cum
P/L CC walls string courses, coping, bed blocks, window sills
,etc. up to floor five level
R.C.C. 1:2:4 (1 cement: 2 coarse sand: 4 graded stone
aggregate 20 mm nominal size).
0.91x0.91x0.075 m = 0.062 cum Say 0.06 cum
RCC in beams, suspended floors, staircases, etc upto floor 5
level excldg centering, shutt
0.45x0.45 m = 0.202 sqm
0.45x0.20 m = 0.09 sqm
outside slab : 3.40x0.075 m = 0.255 sqm
Total= 0.547 sqm Say 0.55 sqm
Dedduct labour for not lifting material upto floor five level - day
Coolie
Centering & shuttering including strutting, propping etc. - Sqm
Walls including attached pilas
Mild steel reinforcement for R.C.C work
0.062 cum @ 80 kg/cum = 4.96 kg
Reinforcement for R.C.C. work all complete. -Upto plinth level
Mild steel and Medium Tensi
Vertical R.C.C.grating 450x100 mm
Fixing and carriage of R.C.C. grating

each
L.S.

0.17

3087.47

0.43

3508.25

1.55

173.09

0.001

5272.38

0.06

5494.55

-0.113

247.00

0.55

285.14

4.96

56.77

1.00
20.67

305.00
1.49
Total:
307.89

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G] i.e on

310.97
Cost for 1.00 No.
Rate per Each:

DSR-12

Rs 3432.68

Page 1016 of 2298

Rate as per DSR-12:

Rs 3451.90

Item Code: 19.29.1

Constructing brick masonry road gully chamber 110 x 50 x 77.5 cm with bricks of class designation 7.5 in C.M 1 : 5: With common
burnt F.P.S. bricks.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one chamber
Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded
stone aggregate 40 mm nominal size)
1.71mx1.71mx0.15m = 0.285 cum Say 0.29 cum
04.001.11 P/L CC excluding centering - All work up to plinth level: 1:5:10 0.29
3087.47
Fine sand, 40mmstone ag
Brick work in bricks of clas designation 75 in cement mortar
1:4(1 cement: 4 coarse sand)
1.91 m x 0.23m x0.45 m = 0.199 cum
2.20mx0.23mx0.70 m = 0.354 cum
Total= 0.553 cum
Deduct lintel portion
2x0.23x0.20x0.20 m = (-) 0.018 cum
Net qty= 0.0535 cum Say 0.54 cum
06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation
0.54
3508.25
and plinth in: CM 1:4 (1 cem
12 mm cement plaster 1:3 ( 1 cement: 3 coarse sand) finished
with floating coat of neat cement
Wall: 1.80x0.70 m = 1.26 sqm
Wall: 1.40x0.45 m = 0.63 sqm
Bed: 1.10x0.50 m = 0.55 sqm
Total= 2.44 sqm
Deduct 2x0.20x0.20 m = (-) 0.08 sqm
Net qty= 2.36 sqm
13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
2.36
173.09
floating coat of neat cement.
Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
Block = 1.92x0.23x0.15 = 0.07 cum
04.002.03 P/L CC walls string courses, coping, bed blocks, window sills
0.07
5272.38
,etc. up to floor five level
R.C.C. 1:2:4 (1 cement: 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
0.88x0.96x0.075 m = 0.063 cum Say 0.06 cum
05.003
RCC in beams, suspended floors, staircases, etc upto floor 5
0.06
5494.55
level excldg centering, shutt
Deduct labour for not lifting material upto floor five level
0115

05.013

05.009.02

DSR-12

Coolie
Day
RCC 1:2:4 in lintels
1x0.96x0.20x0.20 m = 0.04 cum
P/H/F up to floor 5 level precast RCC in small lintels including Cum
centering, shuttering, fi
Form work
Slab bottom 0.50x0.65 m = 0.325 sqm
Outer periphery 3.50x0.075 m = 0.263 sqm
2.20x0.15 m = 0.330 sqm
Total= 0.918 sqm Say 0.91 sqm
Centering & shuttering including strutting, propping etc. - Sqm
Walls including attached pilas
Mild steel reinforcement for R.C.C work
(0.06+0.04) = 0.10 cum @ 80 kg/cum = 8.00 kg

-0.113

247.00

0.04

7244.98

0.91

285.14

Page 1017 of 2298

05.022.01
7380
9999
7381
9999

Reinforcement for R.C.C. work all complete. -Upto plinth level

Mild steel and Medium Tensi
Precast R.C.C.gully grating with frame 500x450 mm
Carriage of R.C.C. grating
Precast R.C.C.grating 450x100 mm vertical
Labour for fixing pre cast R.C.C. grating and

each
L.S.
each
L.S.

8.00

56.77

1.00
7.15
1.00
34.06

650.00
1.49
305.00
1.49
Total:
988.49

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F]+[G]+[H] i.e on

998.37
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 6048.63
Rs 6111.70

Item Code: 19.30.1.1

Constructing brick masonry chamber for under ground C.I inspection chamber :- Inside dimensions 455x610 mm and 45 cm deep
for single pipe line : With F.P.S. bricks.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one chamber
Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded
stone aggregate 40 mm nominal size)
1.22mx1.065mx0.15m=0.195 cum Say 0.20 cum
04.001.11 P/L CC excluding centering - All work up to plinth level: 1:5:10 0.20
3087.47
Fine sand, 40mmstone ag
Brick work in bricks of clas designation 75 in cement mortar
1:4(1 cement: 4 coarse sand)
3.05 m x 0.23m x0.30 m = 0.210 cum
Less pipe
2x3.14/4x(0.10)^2 x0.23 m = (-) 0.004 cum
Net qty= 0.206 cum Say 0.21 cum
06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation
0.21
3508.25
and plinth in: CM 1:4 (1 cem
12 mm cement plaster 1:3 ( 1 cement: 3 coarse sand) finished
with floating coat of neat cement
Wall: 2.13x0.30 m = 0.639 sqm
Bed : 0.61x0.455 m = 0.278 sqm
Total= 0.917 sqm
Less pipe 2x3.14/4x(0.10)^2 = (-) 0.016 sqm
Net qty = 0.901 sqm Say 0.90 sqm
13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
0.90
173.09
floating coat of neat cement.
Cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size)
3.05x0.23x0.15 = 0.105 cum say 0.11 cum
04.002.03 P/L CC walls string courses, coping, bed blocks, window sills
0.11
5272.38
,etc. up to floor five level
Form work
Outer periphery 3.73x0.15 m = 0.56 sqm
05.009.02 Centering & shuttering including strutting, propping etc. - Sqm
0.56
285.14
Walls including attached pilas
1354
C.I. Cover with frame 455x610 mm
each
1.00
1415.00
9999
Carriage of C.I.cover and frame
L.S.
7.15
1.49
9999
Painting of C.I. Cover and frame with coal tar
L.S.
7.15
1.49
9999
Sundries
L.S.
13.52
1.49
Total:
Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E] i.e on
1456.44

DSR-12

Page 1018 of 2298

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E] i.e on

1471.00
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 3941.29
Rs 3917.65

Item Code: 19.30.2.1

Constructing brick masonry chamber for under ground C.I inspection chamber :- Inside dimensions 500x700 mm and 45 cm deep
for pipe line: With F.P.S. bricks.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost of one no.
Cement concrete 1:5:10 (1 cement: 5 fine
sand : 10 graded stone aggregate 40 mm
nominal size)
1.31mx1.11rnx0.15 m= 0.22 cum
04.001.11 P/L CC excluding centering - All work up to plinth level: 1:5:10 0.22
3087.47
Fine sand, 40mmstone ag
Brick work in oncks of clas designation 75 in
cement mortar 1:4(1 cement: 4 coarse sand)
3.32 m x 0.23m x0.30 m = 0.229 cum
Less pipe
3x3.14x(0.10)^2 x0.23 m = (-) 0.005 cum
Net qty= 0.224 cum Say 0.22 cum
06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation
0.22
3508.25
and plinth in: CM 1:4 (1 cem
12 mm cement plaster 1:3 (1 cement: 3 coarse
sand) finished with floating coat of neat cement
Wall: 2.40x0.30 m = 0.72 sqm
Bed : 0.70x0.50 m = 0.35 sqm
= 1.07 sqm
Less pipe 3x3.14/4x(0.10)^2 = (-) 0.02 sqm
Net qty= 1.05 sqm
13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
1.05
173.09
floating coat of neat cement.
R.C.C 1:2:4 ( 1 cement: 2 coarse sand : 4
graded stone aggregate 20 mm nominal size)
1.16x0.96x0.15 = 0.167 cum
Deduct cover
0.61x0.45x0.15 m = (-) 0.042 cum
Net qty= 0.125 cum Say 0.13 cum
05.003
RCC in beams, suspended floors, staircases, etc upto floor 5
0.13
5494.55
level excldg centering, shutt
Form work
Inside area of chamber : 0.70x0.50 m = 0.35 sqm
Outer periphery 4.00x0.15 m = 0.60 sqm
= 0.95 sqm
Deduct cover : 0.61x0.455 m = (-) 0.278 sqm
= 0.672 sqm Say 0.67 sqm
05.009.02 Centering & shuttering including strutting, propping etc. - Sqm
0.67
285.14
Walls including attached pilas
M.S.reinforcement for slab
0.13 cum @ 48.06 kg/cum = 6.25 kg
05.022.01 Reinforcement for R.C.C. work all complete. -Upto plinth level
6.25
56.77
Mild steel and Medium Tensi
1354
C.I. Cover with frame 455x610 mm
each
1.00
1415.00
9999
Carriage of C.I. Cover and frame
L.S.
7.15
1.49
9999
Painting of C.I. Cover and frame with coal tar
L.S.
7.15
1.49
9999
Sundries
L.S.
13.52
1.49

DSR-12

Page 1019 of 2298

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Total:
1456.44

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

1471.00
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 4584.59
Rs 4556.55

Item Code: 19.30.3.1

Constructing brick masonry chamber for under ground C.I inspection chamber :- Inside dimensions 600x850 mm and 45 cm deep
for pipe line: With F.P.S. bricks.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost of one chamber
Cement concrete 1:5:10 (1 cement: 5 fine sand : 10 graded
stone aggregate 40 mm nominal size)
1.46rnxl.21mx0.15 m= 0.26 cum
04.001.11 P/L CC excluding centering - All work up to plinth level: 1:5:10 0.22
3087.47
Fine sand, 40mmstone ag
Brick work in oncks of clas designation 75 in cement mortar
1:4(1 cement: 4 coarse sand)
3.82 m x 0.23m x0.30 m = 0.26 cum
Less pipe
5x3.14/4x(0.10)^2 x0.23 m = (-) 0.009 cum
Net qty= 0.251 cum Say 0.26 cum
06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation
0.22
3508.25
and plinth in: CM 1:4 (1 cem
12 mm cement plaster 1:3 ( 1 cement: 3 coarse sand) finished
with floating coat of neat cement
Wall: 2.90x0.30 m = 0.87 sqm
Bed : 0.85x0.60 m = 0.51 sqm
= 1.38 sqm
Less pipe 5x3.14/4x(0.10) = (-) 0.04 sqm
Net qty = 1.34 sqm
13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
1.05
173.09
floating coat of neat cement.
R.C.C 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
1.31x1.06x0.15 = 0.208 cum Deduct cover
0.61x0.455x0.15 m = (-) 0.042 cum
Net qty= 0.166 cum Say 0.17 cum
05.003
RCC in beams, suspended floors, staircases, etc upto floor 5
0.13
5494.55
level excldg centering, shutt
Deduct labour for not lifting material upto floor five level
0115

05.009.02

DSR-12

Coolie
Day
Form work
Inside area of chamber : 0.85x0.60 m = 0.511 sqm
Outer periphery 4.50x0.15 m = 0.675 sqm =
Total 1.186 sqm
Deduct cover : 0.61x0.455 m = (-) 0.278 sqm
Net qty= 0.908 sqm Say 0.91 sqm
Centering & shuttering including strutting, propping etc. - Sqm
Walls including attached pilas
M.S.reinforcement for slab for 0.17 cum @
48.06 kg/cum
= 48.06x0.17cum = 8.17kg

-0.24

247.00

0.67

285.14

Page 1020 of 2298

05.022.01
1354
9999
9999
9999

Reinforcement for R.C.C. work all complete. -Upto plinth level

Mild steel and Medium Tensi
C.I. Cover with frame 455x610 mm
Carriage of C.I. Cover and frame
Painting of C.I. Cover and frame with coal tar
Sundries

each
L.S.
L.S.
L.S.

6.25

56.77

1.00
7.15
7.15
13.52

1415.00
1.49
1.49
1.49
Total:
1397.16

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E]+[F] i.e on

1411.13
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 4515.74
Rs 5259.10

Item Code: 19.31.1.1

Extra for depth beyond 45 cm of brick masonry chamber :- For 455 x 610 mm size :
Details of Cost for : 1.00 m
Code
Description
Unit
Quantity
Details of cost for one metre
Brick work in bricks of clas designation 75 in cement mortar
1:4(1 cement: 4 coarse sand)
3.05 x 0.23m x 1.00m = 0.70 cum
06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation
0.70
and plinth in: CM 1:4 (1 cem
12mm cement plaster1:3 (1 cement: 3 coarse sand finished
with floating coat of neat cement
Wall: 2.13x1.00 m = 2.13 sqm
13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
2.13
floating coat of neat cement.
Add water charges @ 1% except on [A]+[B] i.e on

Rate

3508.25

173.09
Total:
0.00

Add C.P & OH @15% except on [A]+[B] i.e on

0.00
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2824.46
Rs 2824.45

Item Code: 19.31.2.1

Extra for depth beyond 45 cm of brick masonry chamber :- For 500 x 700 mm size : With F.P.S. bricks.
Details of Cost for : 1.00 m
Code
Description
Unit
Quantity
Details of cost for one metre
Brick work in bricks of clas designation 75 in cement mortar
1:4(1 cement: 4 coarse sand)
3.32 x 0.23m x 1.00m = 0.76 cum
06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation
0.76
and plinth in: CM 1:4 (1 cem
12mm cernem plaster1:3 (1 cement: 3 coarse sand) finished
with floating coat of neat cement
Wall: 2.40x1.00 m = 2.40 sqm
13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
2.40
floating coat of neat cement.

DSR-12

Rate

3508.25

173.09

Add water charges @ 1% except on [A]+[B] i.e on

Total:
0.00

Add C.P & OH @15% except on [A]+[B] i.e on

0.00

Page 1021 of 2298

Cost for 1.00 m

Rate per One Metre:
Rate as per DSR-12:

Rs 3081.69
Rs 3081.70

Item Code: 19.31.3.1

Extra for depth beyond 45 cm of brick masonry chamber :- For 600 x 850 mm size : With F.P.S. bricks.
Details of Cost for : 1.00 m
Code
Description
Unit
Quantity
Details of cost for one metre
Brick work in bricks of clas designation 75 in cement mortar
1:4 ( 1 cement: 4 coarse sand)
3.82 m x 0.23m xl.00 m = 0.88 cum
06.001.01 Brick work with F.P.S. bricks of class desgn 75 in foundation
0.88
and plinth in: CM 1:4 (1 cem
12 mm cement plaster 1:3(1 cement: 3 coarse sand finished
with floating coat of neat cement
Wall : 2.90x1.00 m = 2.90 sqm
13.009.01 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
2.90
floating coat of neat cement.
Add water charges @ 1% except on [A]+[B] i.e on

Rate

3508.25

173.09
Total:
0.00

Add C.P & OH @15% except on [A]+[B] i.e on

0.00
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 3589.22
Rs 3589.25

Item Code: 19.32.1

Making soakpit 2.5 m dia 3 m deep With FPS bricks
Code

02.008.01

02.026.01

2602

0362
0285
0287
1854
2260

DSR-12

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for one soak pit
Earth work in excavation including disposal of surplus earth
3.14/4x(2.5)^2 x3m = 14.73 cum
E/W excavation in foundation trenches .. .. All kinds of soil.
14.73
= 3.14/4x(2.5)^2 x 1.5 m = 7.37 cum
Extra for every additional lift of 1.5 m or part thereof in: All
kinds of soil.
2nd class bricks
perimetre = 4x0.35 =1.40 m
Area = 1.40x2.925 m = 4.1 sqm
Number of brick = 4.1 x487x0.066 =131.78
Wastage 10%= 13.718
Total= 144.96 Say 145 numbers (Common burnt clay F.P.S
(non modular) Bricks of class desig
Brickbats = 3.14/4x(1.2)^2 x2.925m =3.33 cum
Deduct = 0.45x0.45x2.925 m = 0.59 cum
Net qty= 2.74 cum
Brick aggregate 50 to 80 mm nominal size
= 3.14x1.50x0.03x2.925 m = 4.13 cum
Brick aggregate 40 mm nominal size
= 3.14x2.15x0.35x2.925 m =6.91 cum
100 mm diametre S.W. pipes ( 60 cm long)
Carriage of brick bats and aggregate
(2.74+4.13+6.91) cum = 6.25 sqm

Rate

130.78

7.37

34.58

1000

145.00

2900.00

cum

2.74

325.00

cum

4.13

475.00

cum
each

6.91
3.00

500.00
36.00

cum

13.78

95.22

Page 1022 of 2298

2201
9999

05.012

05.022.01

16.008.01

0123
0124
0114
0115

Carriage of bricks
1000
Single matting 2.5x2.5 m = 6.25 sqm
L.S.
Precast R.C.C.slabs 7.5 cm thick in cement concrete 1:2:4 (1
cement: 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size)
0.45x0.45x0.075 m = 0.02 cum
Providing, hoisting and fixing upto floor 5 level precast RCC
work in string courses, band
Reinforcement @ 80 kg/cum = 0.02x80 =1.6 kg
Reinforcement for R.C.C. work all complete. -Upto plinth level
Mild steel and Medium Tensi
2nd class brick edging laid length wise with half brick depth.
3.14x2.6 m =8.17 m
Brick edging laid lengthwise with half brick depth : With F.P.S.
bricks of class designati
LABOUR
Mason 1st class
Mason 2nd class
Beldar
Coolie

Day
Day
Day
Day

145.00
112.14

233.60
1.49

0.02

5262.12

1.60

56.77

8.17

23.80

0.50
0.50
3.00
3.00

301.00
273.00
247.00
247.00
Total:
10117.84

Add water charges @ 1% except on [A]+[B]+[C]+[D]+[E] i.e on

Add C.P & OH @15% except on [A]+[B]+[C]+[D]+[E] i.e on

10219.02
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 14323.63
Rs 15228.15

Item Code: 19.33

Constructing soak pit 1.20x 1.20x1.20 m
Code

02.008.01

0362
2260

16.008.01
1854
9999

0114
9999

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for one soak pit
Earth work in excavation including disposal of surplus earth
1.2x1.2x1.2m = 1.73 cum
E/W excavation in foundation trenches .. .. All kinds of soil.
1.73
Brick bats
1.2x12x1.2 m = 1.73 cum
Carriage of brickbats
Second class brick edging laid length wise with half brick
depth
Brick edging laid lengthwise with half brick depth : With F.P.S.
bricks of class designati
S.W. pipe 100 mm diameter (60 cm long)
Single matting
1.2x1.2 m= 1.44 sqm
LABOUR
For filling brick bats
Beldar
Sundries

cum
cum

Rate

130.78

1.73
1.73

325.00
95.22

5.20

23.80

each

2.00

36.00

L.S.

25.84

1.49

Day
L.S.

0.50
13.50

247.00
1.49
Total:
981.10

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

990.91
Cost for 1.00 No.

DSR-12

Page 1023 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 1489.56
Rs 1591.35

Item Code: 19.34.1

P/L S.W. intercepting trap in manholes with stiff mixture of cement mortar 1 : 1. 100 mm dia.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost of one no.
MATERIALS
7128
S.W intercepting trap 100 mm dia
each
1.00
9999
Carriage of trap
L.S.
1.04
0367
Cement for one joint
tonne
0.0013
2209
Carriage of cement
tonne
0.0013
0983
Fine sand
cum
0.001
2261
Carriage of fine sand
cum
0.001
1881
Spun yarn or plain gaskin
kilog
0.09
LABOUR
0123
Mason 1st class
Day
0.02
0124
Mason 2nd class
Day
0.02
0114
Beldar
Day
0.06
0101
Bhisti
Day
0.02
Add water charges @ 1% on

Rate

170.00
1.49
5000.00
77.87
640.00
87.60
40.00
301.00
273.00
247.00
260.00
Total:
213.98

Add C.P & OH @15% on

216.12
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 248.54
Rs 248.55

Item Code: 19.34.2

P/L S.W. intercepting trap in manholes with stiff mixture of cement mortar 1 : 1. 150 mm dia.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Details of cost of one no.
MATERIALS
7129
S.W. iintercepting trap 150mmdia
each
1.00
9999
Carriage of trap
L.S.
2.08
0367
Cement for one joint
tonne
0.0019
2209
Carriage of cement
tonne
0.0019
0983
Fine sand
cum
0.0014
2261
Carriage of fine sand
cum
0.0014
1881
Spun yarn or plain gaskin
kilog
0.18
LABOUR
0123
Mason 1st class
Day
0.03
0124
Mason 2nd class
Day
0.03
0114
Beldar
Day
0.08
0101
Bhisti
Day
0.03
Add water charges @ 1% on

Rate

225.00
1.49
5000.00
77.87
640.00
87.60
40.00
301.00
273.00
247.00
260.00
Total:
290.75

Add C.P & OH @15% on

293.66
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 337.71
Rs 337.70

Page 1024 of 2298

Item Code: 20.1.1

Providing, driving and insta- lling driven cast-in-situ RCC piles of specified dia. and length below the pile cap M-35 in cement
concrete: 400 mm dia. piles.
Details of Cost for : 20.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
Concrete -3.14/4x0.40 x20 = 2.51 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
2.51
5242.17
grade CC for RCC including pumping o
9999
Sundries
L.S.
521.08
1.49
7181
C.I. Shoes @ 80 kg per pile
kilog
80.00
46.00
7182
M.S. clamps for shoes @ 35 kg per pile
kilog
35.00
42.00
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.36
34000.00
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.06
2200.00
LABOUR
0130
Work supervisor (Mistri)
Day
0.08
301.00
0114
Beldar
Day
2.00
247.00
Total:
Add water charges @ 1% except on [A] i.e on
18816.49
Add C.P & OH @15% except on [A] i.e on
19004.65
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1750.66
Rs 1750.65

Item Code: 20.1.2

Providing, driving and insta- lling driven cast-in-situ RCC piles of specified dia. and length below the pile cap M-35 in cement
concrete: 450 mm dia. piles.
Details of Cost for : 20.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
Concrete -3.14/4x0.45 x20 = 3.18 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
3.18
5242.17
grade CC for RCC including pumping o
9999
Sundries
L.S.
392.70
1.49
7181
C.I. Shoes @ 80 kg per pile
kilog
80.00
46.00
7182
M.S. clamps for shoes @ 35 kg per pile
kilog
35.00
42.00
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.48
34000.00
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.06
2200.00
LABOUR
0130
Work supervisor (Mistri)
Day
0.08
301.00
0114
Beldar
Day
2.00
247.00
Total:
Add water charges @ 1% except on [A] i.e on
22705.20
Add C.P & OH @15% except on [A] i.e on
22932.25
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2152.11
Rs 2152.10

Item Code: 20.1.3

DSR-12

Page 1025 of 2298

Providing, driving and insta- lling driven cast-in-situ RCC piles of specified dia. and length below the pile cap M-35 in cement
concrete: 500 mm dia. piles.
Details of Cost for : 20.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
Concrete 3.14/4x0.50^2 x20 = 3.925 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
3.925
5242.17
grade CC for RCC including pumping o
9999
Sundries
L.S.
530.00
1.49
7181
C.I. Shoes @ 80 kg per pile
kilog
80.00
46.00
7182
M.S. clamps for shoes @ 35 kg per pile
kilog
35.00
42.00
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.60
34000.00
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.06
2200.00
LABOUR
0130
Work supervisor (Mistri)
Day
0.08
301.00
0114
Beldar
Day
2.00
247.00
Total:
Add water charges @ 1% except on [A] i.e on
26989.78
Add C.P & OH @15% except on [A] i.e on
27259.68
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2596.21
Rs 2596.20

Item Code: 20.1.4

Providing, driving and insta- lling driven cast-in-situ RCC piles of specified dia. and length below the pile cap M-35 in cement
concrete: 550 mm dia. piles.
Details of Cost for : 20.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
Concrete 3.14/4x0.55^2 x20 = 4.75 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
4.75
5242.17
grade CC for RCC including pumping o
9999
Sundries
L.S.
371.88
1.49
7181
C.I. Shoes @ 80 kg per pile
kilog
80.00
46.00
7182
M.S. clamps for shoes @ 35 kg per pile
kilog
35.00
42.00
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.60
34000.00
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.06
2200.00
LABOUR
0130
Work supervisor (Mistri)
Day
0.08
301.00
0114
Beldar
Day
2.00
247.00
Total:
Add water charges @ 1% except on [A] i.e on
26754.18
Add C.P & OH @15% except on [A] i.e on
27021.72
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2798.76
Rs 2798.75

Item Code: 20.1.5

Providing, driving and insta- lling driven cast-in-situ RCC piles of specified dia. and length below the pile cap M-35 in cement
concrete: 750 mm dia. piles.

DSR-12

Page 1026 of 2298

Code

05.033.01
9999
7181
7182
0024
0025
0130
0114

Details of Cost for : 15.00 m

Unit
Quantity

Description
MATERIAL
Concrete 3.14/4x0.75^2 x20 = 6.62 cum
P/L machine batched and machine mixed design mix M-25
grade CC for RCC including pumping o
Sundries
C.I. Shoes @ 80 kg per pile
M.S. clamps for shoes @ 35 kg per pile
MACHINERY
Hire and running charges of hydraulic piling rig with power
unit etc. including complete a
Hire and running charges of light crane.
LABOUR
Work supervisor (Mistri)
Belder

Rate

Cum

6.62

5242.17

L.S.
kilog
kilog

573.57
80.00
35.00

1.49
46.00
42.00

per d

0.70

34000.00

per d

0.06

2200.00

Day
Day

0.14
3.50

301.00
247.00
Total:
30843.26

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

31151.69
Cost for 15.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 4701.84
Rs 3526.35

Item Code: 20.1.6

Providing, driving and insta- lling driven cast-in-situ RCC piles of specified dia. and length below the pile cap M-35 in cement
concrete: 1000 mm dia. piles.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
Concrete 3.14/4x1.00^2 x10 = 7.85 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
7.85
5242.17
grade CC for RCC including pumping o
9999
Sundries
L.S.
897.89
1.49
7181
C.I. Shoes @ 80 kg per pile
kilog
80.00
46.00
7182
M.S. clamps for shoes @ 35 kg per pile
kilog
35.00
42.00
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.68
34000.00
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.06
2200.00
LABOUR
0130
Work supervisor (Mistri)
Day
0.16
301.00
0114
Beldar
Day
4.00
247.00
Total:
Add water charges @ 1% except on [A] i.e on
30776.02
Add C.P & OH @15% except on [A] i.e on
31083.78
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 7689.74
Rs 7689.70

Item Code: 20.1.7

Providing, driving and insta- lling driven cast-in-situ RCC piles of specified dia. and length below the pile cap M-35 in cement
concrete: 1200 mm dia. piles.
Details of Cost for : 9.00 m
Code
Description
Unit
Quantity
Rate

DSR-12

Page 1027 of 2298

05.033.01
9999
7181
7182
0024
0025
0130
0114

MATERIAL
Concrete 3.14/4x1.2^2 x9 =10.17cum
P/L machine batched and machine mixed design mix M-25
grade CC for RCC including pumping o
Sundries
a) C.I. Shoes @ 80 kg per pile
b) M.S. clamps for shoes @ 35 kg per pile
MACHINERY
Hire and running charges of hydraulic piling rig with power
unit etc. including complete a
Hire and running charges of light crane.
LABOUR
Work supervisor (Mistri)
Beldar

Cum

10.17

5242.17

L.S.
kilog
kilog

733.37
80.00
35.00

1.49
46.00
42.00

per d

0.67

34000.00

per d

0.06

2200.00

Day
Day

0.18
4.50

301.00
247.00
Total:
30320.40

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

30623.60
Cost for 9.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 9836.67
Rs 9836.65

Item Code: 20.1.8

Providing, driving and insta- lling driven cast-in-situ RCC piles of specified dia. and length below the pile cap M-35 in cement
concrete: 1200 mm dia. piles.
Details of Cost for : 9.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
Concrete 3.14/4x1.5^2 x9 =15.90 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
15.90
5242.17
grade CC for RCC including pumping o
9999
Sundries
L.S.
1113.48
1.49
7181
(a) C.I. Shoes @ 80 kg per pile
kilog
80.00
46.00
7182
(b) M.S. clamps for shoes 35 kg per pile
kilog
35.00
42.00
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.77
34000.00
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.10
2200.00
LABOUR
0130
Work supervisor (Mistri)
Day
0.20
301.00
0114
Beldar
Day
5.00
247.00
Total:
Add water charges @ 1% except on [A] i.e on
34504.29
Add C.P & OH @15% except on [A] i.e on
34849.33
Cost for 9.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 13714.14
Rs 13714.35

Item Code: 20.2.1

Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement
concrete: 300 mm dia. piles.
Details of Cost for : 20.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
Concrete 3.14/4x0.30^2 x20 = 1.41 cum

DSR-12

Page 1028 of 2298

05.033.01
7183
9999
0024
0025
0026
0018
0017
0130
0114

P/L machine batched and machine mixed design mix M-25

grade CC for RCC including pumping o
Bentonite.
Sundries
MACHINERY
Hire and running charges of hydraulic piling rig with power
unit etc. including complete a
Hire and running charges of light crane.
Hire and running charges of bentonite pump.
Hire and running charges of loader.
Hire and running charges of tipper
LABOUR
Work supervisor (Mistri)
Beldar

Cum

1.41

5242.17

tonne
L.S.

0.16
289.85

3100.00
1.49

per d

0.36

34000.00

per d
per d
Day
Day

0.06
0.38
0.30
0.30

2200.00
4200.00
5000.00
1700.00

Day
Day

0.12
2.00

301.00
247.00
Total:
17436.00

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

17610.36
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1382.17
Rs 1382.15

Item Code: 20.2.2

Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement
concrete: 400 mm dia. piles.
Details of Cost for : 20.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
Concrete 3.14/4x0.40^2 x20 = 2.51 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
2.51
5242.17
grade CC for RCC including pumping o
7183
Bentonite
tonne
0.225
3100.00
9999
Sundries
L.S.
79.06
1.49
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.36
34000.00
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.06
2200.00
0026
Hire and running charges of bentonite pump.
per d
0.38
4200.00
0018
Hire and running charges of loader.
Day
0.30
5000.00
0017
Hire and running charges of tipper
Day
0.30
1700.00
LABOUR
0130
Work supervisor (Mistri)
Day
0.12
301.00
0114
Beldar
Day
2.00
247.00
Total:
Add water charges @ 1% except on [A] i.e on
17323.42
Add C.P & OH @15% except on [A] i.e on
17496.65
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1663.95
Rs 1613.95

Item Code: 20.2.3

Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement
concrete: 450 mm dia. piles.
Details of Cost for : 20.00 m
Code
Description
Unit
Quantity
Rate

DSR-12

Page 1029 of 2298

05.033.01
7183
9999
0024
0025
0026
0018
0017
0130
0114

MATERIAL
Concrete 3.14/4x0.45^2 x20 = 3.18 cum
P/L machine batched and machine mixed design mix M-25
grade CC for RCC including pumping o
Bentonite
Sundries
MACHINERY
Hire and running charges of hydraulic piling rig with power
unit etc. including complete a
Hire and running charges of light crane.
Hire and running charges of bentonite pump.
Hire and running charges of loader.
Hire and running charges of tipper
LABOUR
Work supervisor (Mistri)
Beldar

Cum

3.18

5242.17

tonne
L.S.

0.25
230.69

3100.00
1.49

per d

0.47

34000.00

per d
per d
Day
Day

0.63
0.38
0.30
0.30

2200.00
4200.00
5000.00
1700.00

Day
Day

0.12
2.50

301.00
247.00
Total:
22744.35

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

22971.79
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2154.38
Rs 2154.40

Item Code: 20.2.4

Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement
concrete: 500 mm dia. piles.
Details of Cost for : 20.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
Concrete 3.14/4x0.50^2 x20= 3.925 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
3.925
5242.17
grade CC for RCC including pumping o
7183
Bentonite
tonne
0.28
3100.00
9999
Sundries
L.S.
87.95
1.49
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.60
34000.00
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.06
2200.00
0026
Hire and running charges of bentonite pump.
per d
0.38
4200.00
0017
Hire and running charges of tipper
Day
0.30
1700.00
0018
Hire and running charges of loader.
Day
0.30
5000.00
LABOUR
0130
Work supervisor (Mistri)
Day
0.12
301.00
0114
Beldar
Day
2.50
247.00
Total:
Add water charges @ 1% except on [A] i.e on
25790.67
Add C.P & OH @15% except on [A] i.e on
26048.58
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2526.57
Rs 2526.55

Item Code: 20.2.5

Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement
concrete: 600 mm dia. piles.

DSR-12

Page 1030 of 2298

Code

05.033.01
7183
9999
0024
0025
0026
0017
0018
0130
0114

Details of Cost for : 20.00 m

Unit
Quantity

Description
MATERIAL
Concrete 3.14/4x0.60^2 x20= 5.65 cum
P/L machine batched and machine mixed design mix M-25
grade CC for RCC including pumping o
Bentonite
Sundries
MACHINERY
Hire and running charges of hydraulic piling rig with power
unit etc. including complete a
Hire and running charges of light crane.
Hire and running charges of bentonite pump.
Hire and running charges of tipper
Hire and running charges of loader.
LABOUR
Work supervisor (Mistri)
Beldar

Cum

Rate

5.65

5242.17

tonne
L.S.

0.33
317.43

3100.00
1.49

per d

0.75

34000.00

per d
per d
Day
Day

0.06
0.38
0.30
0.30

2200.00
4200.00
1700.00
5000.00

Day
Day

0.12
3.00

301.00
247.00
Total:
31511.09

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

31826.20
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 3310.92
Rs 3310.90

Item Code: 20.2.6

Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement
concrete: 750 mm dia. piles.
Details of Cost for : 15.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
Concrete 3.14/4x0.75^2 xl5 = 6.62 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
6.62
5242.17
grade CC for RCC including pumping o
7183
Bentonite
tonne
0.30
3100.00
9999
Sundries
L.S.
131.58
1.49
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.70
34000.00
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.06
2200.00
0026
Hire and running charges of bentonite pump.
per d
0.75
4200.00
0017
Hire and running charges of tipper
Day
0.30
1700.00
0018
Hire and running charges of loader.
Day
0.30
5000.00
LABOUR
0130
Work supervisor (Mistri)
Day
0.14
301.00
0114
Beldar
Day
3.50
247.00
Total:
Add water charges @ 1% except on [A] i.e on
31124.69
Add C.P & OH @15% except on [A] i.e on
31435.94
Cost for 15.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 4723.63
Rs 4723.60

Item Code: 20.2.7

DSR-12

Page 1031 of 2298

Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement
concrete: 1000 mm dia. piles.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
Concrete 3.14/4x1.00^2 x10 = 7.85 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
7.85
5242.17
grade CC for RCC including pumping o
7183
Bentonite
tonne
0.35
3100.00
9999
Sundries
L.S.
175.89
1.49
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.69
34000.00
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.06
2200.00
0026
Hire and running charges of bentonite pump.
per d
0.75
4200.00
0017
Hire and running charges of tipper
Day
0.40
1700.00
0018
Hire and running charges of loader.
Day
0.40
5000.00
LABOUR
0130
Work supervisor (Mistri)
Day
0.16
301.00
0114
Beldar
Day
4.00
247.00
Total:
Add water charges @ 1% except on [A] i.e on
31805.24
Add C.P & OH @15% except on [A] i.e on
32123.29
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 7809.28
Rs 7809.25

Item Code: 20.2.8

Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement
concrete: 1200 mm dia. piles.
Details of Cost for : 9.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
Concrete 3.14/4x1.20^2 x9 =10.17 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
10.17
5242.17
grade CC for RCC including pumping o
7183
Bentonite
tonne
0.385
3100.00
9999
Sundries
L.S.
290.79
1.49
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.67
34000.00
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.06
2200.00
0026
Hire and running charges of bentonite pump.
per d
0.75
4200.00
0017
Hire and running charges of tipper
Day
0.50
1700.00
0018
Hire and running charges of loader.
Day
0.50
5000.00
LABOUR
0130
Work supervisor (Mistri)
Day
0.18
301.00
0114
Beldar
Day
4.50
247.00
Total:
Add water charges @ 1% except on [A] i.e on
32204.46
Add C.P & OH @15% except on [A] i.e on
32526.50
Cost for 9.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 10079.82
Rs 10079.80

Page 1032 of 2298

Item Code: 20.2.9

Boring, providing and instal- ling bored cast-in-situ RCC pile of specified diametre and length below the pile cap M-35 in cement
concrete: 1500 mm dia. piles.
Details of Cost for : 9.00 m
Code
Description
Unit
Quantity
Rate
Details of cost for 9 m length of pile
MATERIAL
Concrete 3.14/4x1.50^2 x9 = 15.90 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
15.90
5242.17
grade CC for RCC including pumping o
7183
Bentonite
tonne
0.45
3100.00
9999
Sundries
L.S.
593.48
1.49
MACHINERY
0024
Hire and running charges of hydraulic piling
per d
0.77
34000.00
rig with power unit etc. including complete
accessories and shifting at site.
0025
Hire and running charges of light crane.
per d
0.10
2200.00
0026
Hire and running charges of bentonite pump.
per d
0.96
4200.00
0017
Hire and running charges of tipper
Day
0.75
1700.00
0018
Hire and running charges of loader.
Day
0.75
5000.00
LABOUR
0130
Work supervisor (Mistri)
Day
0.25
301.00
0114
Beldar
Day
5.00
247.00
Total:
Add water charges @ 1% except on [A] i.e on
39046.54
Add C.P & OH @15% except on [A] i.e on
39437.01
Cost for 9.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 14300.34
Rs 14300.30

Item Code: 20.3.1

Boring, Providing and install- ing cast in situ single under reamed piles of specified dia. and length below
concrete: 300 mm dia. piles.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIAL
R.C.C
Stem -3.14/4x(0.30)^2 x9.625 = 0.680 cum
Bulb -3.14/4x(0.75)^2 x0.075 = 0.033 cum
2x 3.14/4x(0.525)^2 x0.150 = 0.065 cum
=0.778 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
0.778
grade CC for RCC including pumping o
7183
Bentonite
tonne
0.08
9999
Sundries
L.S.
410.92
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.36
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.03
0026
Hire and running charges of bentonite pump.
per d
0.02
LABOUR
0130
Work supervisor (Mistri)
Day
0.08
0114
Beldar
Day
2.00
Add water charges @ 1% except on [A] i.e on

DSR-12

pile cap M-35in cement

Rate

5242.17
3100.00
1.49
34000.00
2200.00
4200.00
301.00
247.00
Total:
13768.35

Page 1033 of 2298

Add C.P & OH @15% except on [A] i.e on

13906.03
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2007.03
Rs 2007.05

Item Code: 20.3.2

Boring, Providing and install- ing cast in situ single under reamed piles of specified dia. and length below
concrete: 400 mm dia piles.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIAL
R.C.C
Stem -3.14/4x(0.40)^2 x9.30 = 1.169 cum
Bulb -3.14/4x(1.00)^2 x0.1 = 0.079 cum
2x 3.14/4x(0.7)^2 x0.30 = 0.23 cum
= 1.478 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
1.478
grade CC for RCC including pumping o
7183
Bentonite
tonne
0.15
9999
Sundries
L.S.
276.82
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.36
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.06
0026
Hire and running charges of bentonite pump.
per d
0.02
LABOUR
0130
Work supervisor (Mistri)
Day
0.08
0114
Beldar
Day
2.00
Add water charges @ 1% except on [A] i.e on

pile cap M-35in cement

Rate

5242.17
3100.00
1.49
34000.00
2200.00
4200.00
301.00
247.00
Total:
13851.54

Add C.P & OH @15% except on [A] i.e on

13990.06
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2383.65
Rs 2383.65

Item Code: 20.3.3

Boring, Providing and install- ing cast in situ single under reamed piles of specified dia. and length below
concrete: 450 mm dia piles.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIAL
R.C.C
Stem -3.14/4x(0.45)^2 x9.212 = 1.465 cum
Bulb -3.14/4x(1.125)^2 x0.113 = 0.112 cum
2x 3.14/4x(0.788)^2 x0.337 =0.329 cum
= 1.906 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
1.906
grade CC for RCC including pumping o
7183
Bentonite
tonne
0.19
9999
Sundries
L.S.
194.81
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.36
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.06
0026
Hire and running charges of bentonite pump.
per d
0.02

DSR-12

pile cap M-35in cement

Rate

5242.17
3100.00
1.49
34000.00
2200.00
4200.00

Page 1034 of 2298

0130
0114

LABOUR
Work supervisor (Mistri)
Beldar

Day
Day

0.08
2.00

Add water charges @ 1% except on [A] i.e on

301.00
247.00
Total:
13853.35

Add C.P & OH @15% except on [A] i.e on

13991.88
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2608.22
Rs 2608.20

Item Code: 20.3.4

Boring, Providing and install- ing cast in situ single under reamed piles of specified dia. and length below
concrete: 550 mm dia pils.
Details of Cost for : 10.00 m
Code
Description
Unit
Quantity
MATERIAL
R.C.C
Stem -3.14/4x(0.50)^2 x9.125 = 1.792 cum
Bulb -3.14/4x(1.25)^2 x0.125 = 0.153 cum
2x 3.14/4x(0.875)^2 x0.375 = 0.451 cum
= 2.396 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
2.40
grade CC for RCC including pumping o
7183
Bentonite
tonne
0.20
9999
Sundries
L.S.
208.15
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.36
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.06
0026
Hire and running charges of bentonite pump.
per d
0.02
LABOUR
0130
Work supervisor (Mistri)
Day
0.08
0114
Beldar
Day
2.00
Add water charges @ 1% except on [A] i.e on

pile cap M-35in cement

Rate

5242.17
3100.00
1.49
34000.00
2200.00
4200.00
301.00
247.00
Total:
13904.22

Add C.P & OH @15% except on [A] i.e on

14043.26
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2873.10
Rs 2873.00

Item Code: 20.4.1

Extra over item No. 20.3 for providing additional bulb in under reamed piles, under spe- -cified dia. (only the qnty of extra bulbs are
to be paid): 300 mm dia. piles.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for 1 bulb.
Materials :
Bulb - 0.033 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
0.033
5242.17
grade CC for RCC including pumping o
7183
Bentonite
tonne
0.003
3100.00
Machinery
0024
Hire and running charges of hydraulic piling
per d
0.02
34000.00
rig with power unit etc. including complete

DSR-12

Page 1035 of 2298

0025
0026
0130
0114

accessories and shifting at site.

Hire and running charges of light crane.
Hire and running charges of bentonite pump.
Labour
Work supervisior (Mistry)
Beldar

per d
per d

0.01
0.01

2200.00
4200.00

Day
Day

0.02
1.00

301.00
247.00
Total:
1006.32

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

1016.38
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1341.83
Rs 1341.85

Item Code: 20.4.2

Extra over item No. 20.3 for providing additional bulb in under reamed piles, under spe- -cified dia. (only the qnty of extra bulbs are
to be paid): 400 mm dia. piles.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for 1 bulb.
MATERIALS:
Bulb - 0.063 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
0.063
5242.17
grade CC for RCC including pumping o
7183
Bentonite
tonne
0.006
3100.00
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.02
34000.00
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.01
2200.00
0026
Hire and running charges of bentonite pump.
per d
0.01
4200.00
LABOUR
0130
Work supervisior (Mistry)
Day
0.02
301.00
0114
Beldar
Day
1.00
247.00
Total:
Add water charges @ 1% except on [A] i.e on
1015.62
Add C.P & OH @15% except on [A] i.e on
1025.78
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1509.91
Rs 1509.90

Item Code: 20.4.3

Extra over item No. 20.3 for providing additional bulb in under reamed piles, under spe- -cified dia. (only the qnty of extra bulbs are
to be paid): 450 mm dia. piles.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for 1 bulb :
Bulb-0.081 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
0.081
5242.17
grade CC for RCC including pumping o
7183
Bentonite
tonne
0.008
3100.00
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.02
34000.00
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.01
2200.00
0026
Hire and running charges of bentonite pump.
per d
0.01
4200.00

DSR-12

Page 1036 of 2298

0130
0114

LABOUR
Work supervisior (Mistry)
Beldar

Day
Day

0.02
1.00

Add water charges @ 1% except on [A] i.e on

301.00
247.00
Total:
1021.82

Add C.P & OH @15% except on [A] i.e on

1032.04
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1611.47
Rs 1611.45

Item Code: 20.4.4

Extra over item No. 20.3 for providing additional bulb in under reamed piles, under spe- -cified dia. (only the qnty of extra bulbs are
to be paid): 550 mm dia. piles.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for 1 bulb.
MATERIALS :
Bulb-0.102 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
0.102
5242.17
grade CC for RCC including pumping o
7183
Bentonite
tonne
0.01
3100.00
MACHINERY
0024
Hire and running charges of hydraulic piling rig with power per d
0.02
34000.00
unit etc. including complete a
0025
Hire and running charges of light crane.
per d
0.01
2200.00
0026
Hire and running charges of bentonite pump.
per d
0.02
4200.00
LABOUR
0130
Work supervisior (Mistry)
Day
0.02
301.00
0114
Beldar
Day
1.00
247.00
Total:
Add water charges @ 1% except on [A] i.e on
1070.02
Add C.P & OH @15% except on [A] i.e on
1080.72
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1777.53
Rs 1776.55

Item Code: 20.5.1

3roviding, driving and insta- lling driven pre-cast R.C.C. piles of specified diameter and length below the pile cap in M-35 cement
concrete : 400 mm dia.
Details of Cost for : 20.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
Concrete -3.14/4x(0.40)^2 x20 = 2.51 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
2.51
5242.17
grade CC for RCC including pumping o
05.019
Encasing rolled steel sections in beams and columns, with CC
2.51
7259.06
1:2:4
05.001.03 P/L specified grade of RCC excluding centering, shuttering,
-2.51
4703.91
finishing and reinforcement 03.007
Cement mortar 1:2 (1 cement : 2 coarse)
0.025
4863.86
9999
Sundries
L.S.
442.00
1.49
7181
C.I. Shoes @ 80 kg per pile
kilog
80.00
46.00
7182
M.S. shoes 35 kg per pile
kilog
35.00
42.00
MACHINERY

DSR-12

Page 1037 of 2298

0027
0028
0130
0114

Hire and running charges of vibrating pile driving hammer per d

complete with power unit and acc
Hire and running charges of crane 20 tonne capacity.
per d
LABOUR
Work supervisor (Mistri)
Day
Beldar
Day

0.38

35000.00

0.06

9250.00

0.12
3.00

301.00
247.00
Total:
20562.30

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

20767.92
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2172.72
Rs 2172.30

Item Code: 20.5.2

Providing, driving and insta- lling driven pre-cast R.C.C. piles of specified diameter and length below the pile cap in M-35 cement
concrete : 450 mm dia.
Details of Cost for : 20.00 m
Code
Description
Unit
Quantity
Rate
Details of cost for 20 m length of pile
MATERIAL
Concrete -3.14/4x(0.45)^2 x20 = 3.18 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
3.18
5242.17
grade CC for RCC including pumping o
05.019
Encasing rolled steel sections in beams and columns, with CC
3.18
7259.06
1:2:4
05.001.03 P/L specified grade of RCC excluding centering, shuttering,
-3.18
4703.91
finishing and reinforcement 03.007
Cement mortar 1:2 (1 cement : 2 coarse)
0.025
4863.86
Rate as per item no. 3.7
9999
Wooden block @ 1 block per two piles
L.S.
442.00
1.49
Pile shoes
7181
C.I. Shoes @ 80 kg per pile
kilog
80.00
46.00
7182
M.S. shoes @ 35 kg per pile
kilog
35.00
42.00
MACHINERY
0027
Hire and running charges of vibrating pile driving hammer per d
0.38
35000.00
complete with power unit and acc
0028
Hire and running charges of crane 20 tonne capacity.
per d
0.06
9250.00
LABOUR
0130
Work supervisor (Mistri)
Day
1.08
301.00
0114
Beldar
Day
10.78
247.00
Total:
Add water charges @ 1% except on [A]+[B]+[C] i.e on
22772.92
Add C.P & OH @15% except on [A]+[B]+[C] i.e on
23000.65
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2562.31
Rs 2562.40

Item Code: 20.5.3

Providing, driving and insta- lling driven pre-cast R.C.C. piles of specified diameter and length below the pile cap in M-35 cement
concrete : 500 mm dia.
Details of Cost for : 20.00 m
Code
Description
Unit
Quantity
Rate
Details of cost for 20 m length of pile
MATERIAL

DSR-12

Page 1038 of 2298

05.033.01
05.019
05.001.03
03.007
9999
7181
7182
0027
0028
0130
0114

Concrete -3.14/4x(0.50)^2 x20 = 3.925 cum

P/L machine batched and machine mixed design mix M-25
grade CC for RCC including pumping o
Encasing rolled steel sections in beams and columns, with CC
1:2:4
P/L specified grade of RCC excluding centering, shuttering,
finishing and reinforcement Cement mortar 1:2 (1 cement : 2 coarse)
(Rate as per item no. 3.7)
Wooden block @ 1 block per two piles
Pile shoes
C.I. Shoes @ 80 kg per pile
M.S. shoes @ 35 kg per pile
MACHINERY
Hire and running charges of vibrating pile driving hammer
complete with power unit and acc
Hire and running charges of crane 20 tonne capacity.
LABOUR
Work supervisor (Mistri)
Beldar

Cum

3.925

5242.17

3.925

7259.06

-3.925

4703.91

0.025

4863.86

L.S.

442.00

1.49

kilog
kilog

80.00
35.00

46.00
42.00

per d

0.38

35000.00

per d

0.06

9250.00

Day
Day

0.12
3.00

301.00
247.00
Total:
20562.30

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

20767.92
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 2724.38
Rs 2724.50

Item Code: 20.5.4

Providing, driving and insta- lling driven pre-cast R.C.C. piles of specified diameter and length below the pile cap in M-35 cement
concrete : 550 mm dia.
Details of Cost for : 20.00 m
Code
Description
Unit
Quantity
Rate
Details of cost for 20 m length of pile
MATERIAL
Concrete -3.14/4x(0.55)^2 x20 = 4.75 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
4.75
5242.17
grade CC for RCC including pumping o
05.019
Encasing rolled steel sections in beams and columns, with CC
4.75
7259.06
1:2:4
05.001.03 P/L specified grade of RCC excluding centering, shuttering,
-4.75
4703.91
finishing and reinforcement 03.007
Cement mortar 1:2 (1 cement : 2 coarse)
0.025
4863.86
(Rate as per item no. 3.7)
9999
Wooden block @ 1 block per two piles
L.S.
442.00
1.49
Pile shoes
7181
C.I. Shoes @ 80 kg per pile
kilog
80.00
46.00
7182
M.S. shoes @ 35 kg per pile
kilog
35.00
42.00
MACHINERY
0027
Hire and running charges of vibrating pile driving hammer per d
0.38
35000.00
complete with power unit and acc
0028
Hire and running charges of crane 20 tonne capacity.
per d
0.06
9250.00
LABOUR
0130
Work supervisor (Mistri)
Day
0.12
301.00
0114
Beldar
Day
3.00
247.00
Total:
Add water charges @ 1% except on [A]+[B]+[C] i.e on
20562.30

DSR-12

Page 1039 of 2298

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

20767.92
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 3046.02
Rs 3007.90

Item Code: 20.5.5

Providing, driving and insta- lling driven pre-cast R.C.C. piles of specified diameter and length below the pile cap in M-35 cement
concrete : 750 mm dia. piles.
Details of Cost for : 20.00 m
Code
Description
Unit
Quantity
Rate
Details of cost for 20 m length of pile
MATERIAL
Concrete -3.14/4x(0.75)^2 x20 = 10.88 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
10.88
5242.17
grade CC for RCC including pumping o
05.019
Encasing rolled steel sections in beams and columns, with CC
10.88
7259.06
1:2:4
05.001.03 P/L specified grade of RCC excluding centering, shuttering,
-10.88
4703.91
finishing and reinforcement 03.007
Cement mortar 1:2 (1 cement : 2 coarse)
0.025
4863.86
Rate as per item no. 3.7
9999
Wooden block @ 1 block per two piles
L.S.
442.00
1.49
Pile shoes
7181
C.I. Shoes @ 80 kg per pile
kilog
80.00
46.00
7182
M.S. shoes @ 35 kg per pile
kilog
35.00
42.00
MACHINERY
0027
Hire and running charges of vibrating pile driving hammer per d
0.38
35000.00
complete with power unit and acc
0028
Hire and running charges of crane 20 tonne capacity.
per d
0.06
9250.00
LABOUR
0130
Work supervisor (Mistri)
Day
0.12
301.00
0114
Beldar
Day
3.00
247.00
Total:
Add water charges @ 1% except on [A]+[B]+[C] i.e on
20562.30
Add C.P & OH @15% except on [A]+[B]+[C] i.e on
20767.92
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 5435.90
Rs 5436.20

Item Code: 20.5.6

Providing, driving and insta- lling driven pre-cast R.C.C. piles of specified diameter and length below the pile cap in M-35 cement
concrete : 1000 mm dia. piles.
Details of Cost for : 20.00 m
Code
Description
Unit
Quantity
Rate
Details of cost for 20 m length of pile
MATERIAL
Concrete -3.14/4x(1.00)2x20 =15.70 cum
05.033.01 P/L machine batched and machine mixed design mix M-25 Cum
15.70
5242.17
grade CC for RCC including pumping o
05.019
Encasing rolled steel sections in beams and columns, with CC
15.70
7259.06
1:2:4
05.001.03 P/L specified grade of RCC excluding centering, shuttering,
-15.70
4703.91
finishing and reinforcement 03.007
Cement mortar 1:2 (1 cement : 2 coarse)
0.025
4863.86
Rate as per item no. 3.7

DSR-12

Page 1040 of 2298

9999
7181
7182
0027
0028
0130
0114

Wooden block @ 1 block per two piles

L.S.
Pile shoes
C.I. Shoes @ 80 kg per pile
kilog
M.S. shoes @ 35 kg per pile
kilog
MACHINERY
Hire and running charges of vibrating pile driving hammer per d
complete with power unit and acc
Hire and running charges of crane 20 tonne capacity.
per d
LABOUR
Work supervisor (Mistri)
Day
Beldar
Day

442.00

1.49

80.00
35.00

46.00
42.00

0.38

35000.00

0.06

9250.00

0.12
3.00

301.00
247.00
Total:
20562.30

Add water charges @ 1% except on [A]+[B]+[C] i.e on

Add C.P & OH @15% except on [A]+[B]+[C] i.e on

20767.92
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 7315.05
Rs 7315.50

Item Code: 20.6.1.1

Vertical load testing of piles in accordance with IS : 2911 (Part IV) : Single pile rate per test for initial test: Upto 50 ton capacity pile.

Code
7246

Description
Cost per test

Details of Cost for : 1.00 Nos

Unit
Quantity
per t
1.00
Add water charges @ 1% on

Rate
33200.00
Total:
33200.00

Add C.P & OH @15% on

33532.00
Cost for 1.00 Nos
Rate per Per Test:
Rate as per DSR-12:

Rs 38561.80
Rs 38561.80

Item Code: 20.6.1.2

Vertical load testing of piles in accordance with IS : 2911 (Part IV) : Single pile rate per test for initial test: Above 50 and upto 100
tonne capacity pile.
Details of Cost for : 1.00 Nos
Code
Description
Unit
Quantity
Rate
7249
Cyclic verticle load testing of piles in accordance with IS : 2911 per t
1.00
15000.00
(Part-IV) including pr
Total:
Add water charges @ 1% on
15000.00
Add C.P & OH @15% on
15150.00
Cost for 1.00 Nos
Rate per Per Test:
Rate as per DSR-12:

Rs 17422.50
Rs 17422.50

Item Code: 20.6.2.1

Vertical load testing of piles in accordance with IS : 2911 (Part IV) : Single pile rate per test for routine test: Upto 50 tonne capacity
pile.
Details of Cost for : 1.00 Nos
Code
Description
Unit
Quantity
Rate
7247
Cost per test
per t
1.00
40300.00

DSR-12

Page 1041 of 2298

Add water charges @ 1% on

Total:
40300.00

Add C.P & OH @15% on

40703.00
Cost for 1.00 Nos
Rate per Per Test:
Rate as per DSR-12:

Rs 46808.45
Rs 46808.45

Item Code: 20.6.2.2

Vertical load testing of piles in accordance with IS : 2911 (Part IV) : Single pile rate per test for routine test: Above 50 and upto 100
tonne capacity pile routine test.
Details of Cost for : 1.00 Nos
Code
Description
Unit
Quantity
Rate
Details of cost for 1 test
7250
Cyclic verticle load testing of piles in
per t
1.00
23000.00
accordance with IS : 2911 (Part-IV) including
prepration of pile head etc. forSingle pile
above 50 tonne capacity pile and upto 100
tonne capacity pile
Total:
Add water charges @ 1% on
23000.00
Add C.P & OH @15% on
23230.00
Cost for 1.00 Nos
Rate per Per Test:
Rate as per DSR-12:

Rs 26714.50
Rs 26714.50

Item Code: 20.6.3.1

Vertical load testing of piles in accordance with IS : 2911 (Part IV) : Group of two or more piles. Upto 50 tonne capacity rate per test
for initial test.
Details of Cost for : 1.00 Nos
Code
Description
Unit
Quantity
Rate
Details of cost for 1 test
7248
Cost per test
per t
1.00
48500.00
Total:
Add water charges @ 1% on
48500.00
Add C.P & OH @15% on
48985.00
Cost for 1.00 Nos
Rate per Per Test:
Rate as per DSR-12:

Rs 56332.75
Rs 56332.80

Item Code: 20.6.3.2

Vertical load testing of piles in accordance with IS : 2911 (Part IV) : Group of two or more piles. Upto 50 tonne capacity rate for test
for routine test.
Details of Cost for : 1.00 Nos
Code
Description
Unit
Quantity
Rate
Details of cost for 1 test
7251
Cost per test
per t
1.00
29500.00
Total:
Add water charges @ 1% on
29500.00
Add C.P & OH @15% on
29795.00
Cost for 1.00 Nos

DSR-12

Page 1042 of 2298

Rate per Per Test:

Rate as per DSR-12:

Rs 34264.25
Rs 34264.20

Item Code: 20.7.1.1

Cyclic vertical load testing of pile: Single pile. Upto 50 ton capacity pile.
Code
7249

Description
Details of cost for 1 test
cost per test

Details of Cost for : 1.00 Nos

Unit
Quantity
per t

1.00

Add water charges @ 1% on

Rate
15000.00
Total:
15000.00

Add C.P & OH @15% on

15150.00
Cost for 1.00 Nos
Rate per Per Test:
Rate as per DSR-12:

Rs 17422.50
Rs 17422.50

Item Code: 20.7.1.2

Cyclic vertical load testing of pile: Single pile. Above 50 and upto 100 tonne capacity pile.
Details of Cost for : 1.00 Nos
Code
Description
Unit
Quantity
Details of cost for 1 test
7250
Cyclic verticle load testing of piles in
per t
1.00
accordance with IS : 2911 (Part-IV) including
prepration of pile head etc. forSingle pile
above 50 tonne capacity pile and upto 100
tonne capacity pile
Add water charges @ 1% on

Rate
23000.00

Total:
23000.00

Add C.P & OH @15% on

23230.00
Cost for 1.00 Nos
Rate per Per Test:
Rate as per DSR-12:

Rs 26714.50
Rs 26714.50

Item Code: 20.7.2.1

Cyclic vertical load testing of pile: Group of two piles. Upto 50 tonne capacity each.
Details of Cost for : 1.00 Nos
Code
Description
Unit
Quantity
Details of cost for 1 test
7251
Cost per test
per t
1.00
Add water charges @ 1% on

Rate
29500.00
Total:
29500.00

Add C.P & OH @15% on

29795.00
Cost for 1.00 Nos
Rate per Per Test:
Rate as per DSR-12:

Rs 34264.25
Rs 34264.20

Item Code: 20.8.1

Lateral load testing of single pile . Upto 50 tonne capacity pile.
Details of Cost for : 1.00 Nos

DSR-12

Page 1043 of 2298

Code
7252

Description
Details of cost for 1 test
Cost per test

Unit

Quantity

Rate

per t

1.00

15000.00
Total:
15000.00

Add water charges @ 1% on

Add C.P & OH @15% on

15150.00
Cost for 1.00 Nos
Rate per Per Test:
Rate as per DSR-12:

Rs 17422.50
Rs 17422.50

Item Code: 20.8.2

Lateral load testing of single pile . Above 50 and upto 100 tonne capacity piles.
Details of Cost for : 1.00 Nos
Code
Description
Unit
Quantity
Details of cost for 1 test
7253
Cost per test
per t
1.00
Add water charges @ 1% on

Rate
23500.00
Total:
23500.00

Add C.P & OH @15% on

23735.00
Cost for 1.00 Nos
Rate per Per Test:
Rate as per DSR-12:

Rs 27295.25
Rs 27295.20

Item Code: 20.9

Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 ....

Code

0081
0160
0161
9999
9999

Description
Details of cost for one pit test (Ten pits in one day)
MATERIALS:
Pile Integrity testing equipment
LABOUR:
Technician
Helper (technician)
Miscellaneous
Reporting charges
Transportation and consumables etc.,

Details of Cost for : 1.00 Nos

Unit
Quantity

Rate

days

0.10

3000.00

days
days

0.10
0.10

700.00
300.00

100.67
33.56

1.49
1.49
Total:
600.00

L.S.
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

606.00
Cost for 1.00 Nos
Rate per Per Test:
Rate as per DSR-12:

Rs 696.90
Rs 696.90

Item Code: 21.1.1.1

P/F aluminium work in doors, windows, partitions etc - Fixed - Anodised aluminium work
Details of Cost for : 40.02 Kg
Code
Description
Unit
Quantity
Details of cost for 40.02 kg
MATERIAL : Aluminium Section

DSR-12

Rate

Page 1044 of 2298

(i) External member of the frame (Jindal section no 4605)

V = 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
(ii) Internal member of the frame (Jindal section no 4604)

7306
0589
7389
9999

0116
0139
0114
0100
9999

V = 2x2.40 = 4.80 m
H = 1x3x0.95 = 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
(iii) Aluminium snap beading on both side (Jindal section no
4407)
2x6x2 (1.14+0.95) = 50.16 m
Snap beading = 50.16 m @ 0.176 kg/m = 8.33 kg
(iv) Angle cleat 38x38x4.8 mm 50 mm long
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
Add 5% wastage = 2.00 kg
Total = 42.02 kg
kilog
(v) C.P. brass /stainless steel screws 20 mm
100 N
for cleat angle 18x4 = 72 nos
(vii) Anodising
kilog
(viii) Carriage of material
L.S.
LABOUR
For fabrication of frame
Fitter
Day
Beldar (Special)
Day
Beldar
Day
Bandhani
Day
Labour for drilling holes, hire charges of drill,
L.S.

42.02
72.00

220.00
100.00

42.02
52.00

40.00
1.49

2.00
1.00
1.00
0.05
100.00

301.00
260.00
247.00
260.00
1.49
Total:
12345.68

Add water charges @ 1% on

Add C.P & OH @15% on

12469.14
Cost for 40.02 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 358.31
Rs 358.45

Item Code: 21.1.1.2

P/F aluminium work for doors, windows, ventilators and partitions etc as per architectural drawings and the directions of Engineerin-charge. : For fixed portion Powder coated aluminium

Code

Description

Details of Cost for : 40.02 Kg

Unit
Quantity

Rate

MATERIALS:
Aluminium Section
(i) External member of the frame (Jindal section no 4605)
V= 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
(ii) Internal member of the frame (Jindal 'section no 4604)
V- 2x2.40 = 4.80 m
H= 1x3x0.95= 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
(iii) Aluminium snap beading on both side
(Jindal section no 4407)

DSR-12

Page 1045 of 2298

2x6x2 (1.14+0.95) = 50.16 m

Snap beading = 50.16 m @ 0.176 kg/m = 8.33 kg
(iv) Angle cleat 38x38x4.8 mm 50 mm long
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
Add 5% wastage = 2.00 kg
Total = 42.02 kg

7306
0589

Aluminium Sections for partions, door, windows

CP brass / Stainless steel screws - 20mm
for cleat angle 18x4 = 72 nos

kilog
100 N

42.02
72.00

220.00
100.00

7392
9999

Powder coating 50 microns on aluminium sections

(viii) Carriage of material

kilog

42.02

64.00

L.S.

52.00

1.49

Day
Day
Day
Day

2.00
1.00
1.00
0.05

301.00
260.00
247.00
260.00

L.S.

100.00

1.49
Total:
13354.16

LABOUR:
For fabrication of frame
0116
0139
0114
0100
9999

Fitter grade-I
Skilled Beldar
Beldar
Bandhani
Labour for drilling holes, hire charges of drill,

Add water charges @ 1% on

Add C.P & OH @15% on

13487.70
Cost for 40.02 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 387.58
Rs 387.70

Item Code: 21.1.1.3

P/F aluminium work in doors, windows, partitions etc - Fixed - Anodised aluminium work : Polyester Powder coated aluminium

Code

Description

Details of Cost for : 40.02 Kg

Unit
Quantity

Rate

Aluminium Section
(i) External member of the frame (Jindal section no 4605)
V= 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
(ii) Internal member of the frame (Jindal section no 4604)

7306

DSR-12

V= 2x2.40 = 4.80 m
H= 1x3x0.95= 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
(iii) Aluminium snap beading on both side
(Jindal section no 4407)
2x6x2 (1.14+0.95) = 50.16 m
Snap beading = 50.16 m @ 0.176 kg/m = 8.33 kg
(iv) Angle cleat 38x38x4.8 mm 50 mm long
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
Add 5% wastage = 2.00 kg
Total = 42.02 kg

kilog

42.02

220.00

Page 1046 of 2298

0589
7393
9999

0116
0139
0114
0100
9999

(v) C.P. brass /stainless steel screws 20 mm

for cleat angle 18x4 = 72 nos
Polyester powder coating 50 microns on aluminium sections

100 N

72.00

100.00

kilog

42.02

70.00

(viii) Carriage of material

LABOUR
For fabrication of frame
Fitter
Beldar (Special)
Beldar
Bandhani
Labour for drilling holes, hire charges of drill,

L.S.

52.00

1.49

Day
Day
Day
Day
L.S.

2.00
1.00
1.00
0.05
100.00

301.00
260.00
247.00
260.00
1.49
Total:
13606.28

Add water charges @ 1% on

Add C.P & OH @15% on

13742.34
Cost for 40.02 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 394.89
Rs 395.00

Item Code: 21.1.2.1

P/F aluminium work for doors, windows, partitions etc - Shutters - Anodised aluminium
Details of Cost for : 20.21 Kg
Code
Description
Unit
Quantity
MATERIAL
(i) Hanging style (Jindal section no 4524)
1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
(ii) Meeting style (Jindal section no 4526)
1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
(iii) Top & bottom rail (Jindal section no 4510)
2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
(iv) Lock rail (Jindal section no 4524)
1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
(v) Glazing plate (Jindal section no 440) on one side of lock rail

7306
0689

0589
7389
9999
7390

DSR-12

1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg

(vi) Aluminium snap beading (Jindal section no 4497) on both
side
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m @ 0.176 kg/m = 2.51 kg
(vii) Aluminium angle cleat 38x38x4.8 mm 35 mm long
3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
Sub total = 20.62 kg
Add 5% wastage = 1.03 kg
Total = 21.65 kg
(viii) Aluminium hinges 100x75x4 mm
(ix) C.P. brass /stainless steel screws 20 mm
For cleat 12x4 = 48
For cleat 4x8 = 32
For glazing plate @ 15 cm centre to centre in
75 cm length 2x6 = 12
Total = 92 nos
(x) Anodising AC 15
(xi) Carriage of material
(xii) Neoprene/ PVC gasket in groove of
meeting style
LABOUR

Rate

kilog
10 No

21.65
4.00

220.00
500.00

100 N
kilog
L.S.
metre

92.00
21.65
31.20
2.35

100.00
40.00
1.49
25.00

Page 1047 of 2298

0116
0139
0114
0100
0111
0114
9999

For fabrication
Fitter
Beldar (Special)
Beldar
Bandhani
For fixing the shutter including hinges :
Carpenter 1 st class
Beldar
Labour for making provision for fittings and

Day
Day
Day
Day

1.00
1.00
0.50
0.40

301.00
260.00
247.00
260.00

Day
Day
L.S.

0.20
0.50
50.00

301.00
247.00
1.49
Total:
7072.94

Add water charges @ 1% on

Add C.P & OH @15% on

7143.67
Cost for 20.21 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 406.49
Rs 406.50

Item Code: 21.1.2.2

P/F aluminium work for doors, windows, ventilators and partitions as per architectural drawings - : For shutters of doors, windows
& ventilators- Powder coated aluminium
Details of Cost for : 20.21 Kg
Code
Description
Unit
Quantity
Rate
MATERIALS:
(i) Hanging style (Jindal section no 4524)
1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
(ii) Meeting style (Jindal section no 4526)
1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
(iii) Top & bottom rail (Jindal section no
4510)
2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
(iv) Lock rail (Jindal section no 4524)
1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
(v) Glazing plate (Jindal section no 440) on
one side of lock rail
1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg
(vi) Aluminium snap beading (Jindal section
no 4497) on both side
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m@ 0.176 kg/m = 2.51 kg
(vii) Aluminium angle cleat 38x38x4.8 mm 35
mm long
3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
Sub total = 20.62 kg
Add 5% wastage = 1.03 kg
Total = 21.65 kg

DSR-12

7306
0689

Aluminium Sections for partions, door, windows

Aluminium hinge 100x75x4 mm
(ix) C.P. brass /stainless steel screws 20 mm
For cleat 12x4 = 48
For cleat 4x8 = 32
For glazing plate @ 15 cm centre to centre in
75 cm length 2x6 = 12
Total = 92 nos

kilog
10 No

21.65
4.00

220.00
500.00

0589
7392

CP brass / Stainless steel screws - 20mm

Powder coating 50 microns on aluminium sections

100 N
kilog

92.00
21.65

100.00
64.00

Page 1048 of 2298

9999

(xi) Carriage of material

7390

Neoprin/ EPDM rubber gasket

LABOUR:
For fabrication

0116
0139
0114
0100

Fitter grade-I
Skilled Beldar
Beldar
Bandhani
For fixing the shutter including hinges:

0111
0114
9999

Carpenter I class
Beldar
Labour for making provision for fittings and

L.S.
metre

31.20
2.35

1.49
25.00

Day
Day
Day
Day

1.00
1.00
0.50
0.40

301.00
260.00
247.00
260.00

Day
Day

0.20
0.50

301.00
247.00

L.S.

50.00

1.49
Total:
7592.54

Add water charges @ 1% on

Add C.P & OH @15% on

7668.47
Cost for 20.21 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 436.36
Rs 436.35

Item Code: 21.1.2.3

Polyester Powder coated aluminium Polyester Powder coated aluminium Polyester Powder coated aluminium
Details of Cost for : 20.21 Kg
Code
Description
Unit
Quantity
MATERIAL
(i) Hanging style (Jindal section no 4524)
1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
(ii) Meeting style (Jindal section no 4526)
1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
(iii) Top & bottom rail (Jindal section no 4510)
2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
(iv) Lock rail (Jindal section no 4524)
1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
(v) Glazing plate (Jindal section no 440) on one side of lock rail

7306
0689

0589

DSR-12

1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg

(vi) Aluminium snap beading (Jindal section no 4497) on both
side
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m @ 0.176 kg/m = 2.51 kg
(vii) Aluminium angle cleat 38x38x4.8 mm 35 mm long
3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
Sub total = 20.62 kg
Add 5% wastage = 1.03 kg
Total = 21.65 kg
kilog
(viii) Aluminium hinges 100x75x4 mm
10 No
(ix) C.P. brass /stainless steel screws 20 mm
For cleat 12x4 = 48
For cleat 4x8 = 32
For glazing plate @ 15 cm centre to centre in
75 cm length 2x6 = 12
Total = 92 nos
100 N

Rate

21.65
4.00

220.00
500.00

92.00

100.00

Page 1049 of 2298

7393
9999
7390

0116
0139
0114
0100
0111
0114
9999

(X)Polyester powder coating 50 microns on aluminium

sections
(xi) Carriage of material
(xii) Neoprene/ PVC gasket in groove of meeting style
LABOUR
For fabrication
Fitter
Beldar (Special)
Beldar
Bandhani
For fixing the shutter including hinges :
Carpenter 1st class
Beldar
Labour for making provision for fittings and carriage of screws
etc including sundries

kilog

21.65

70.00

L.S.
metre

31.20
2.35

1.49
25.00

Day
Day
Day
Day

1.00
1.00
0.50
0.40

301.00
260.00
247.00
260.00

Day
Day
L.S.

0.20
0.50
50.00

301.00
247.00
1.49

Add water charges @ 1% on

Total:
7722.44

Add C.P & OH @15% on

7799.66
Cost for 20.21 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 443.82
Rs 443.80

Item Code: 21.2.1

with decorative lamination one side and balancing lami- nation on other side . with decorative lamination one side and balancing
lami- nation on other side .
Details of Cost for : 7.00 Sqm
Code
Description
Unit
Quantity
Rate
Details of cost for 7 sqm
MATERIAL
12 mm thick particle board = 7.00 sqm
Add 5% wastage = 0.35 sqm
7477
= 7.35 sqm
sqm
7.35
690.00
9999
Carriage of particle board
L.S.
13.65
1.49
9999
Sundries & screws etc.
L.S.
27.30
1.49
LABOUR:
0112
Carpenter 2nd class
Day
0.90
273.00
0114
Beldar
Day
1.00
247.00
Total:
Add water charges @ 1% on
5625.22
Add C.P & OH @15% on
5681.47
Cost for 7.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 933.38
Rs 933.40

Item Code: 21.2.2

P/F 12mm thick prelaminated particle board - Grade-I- decorative lamination on both sides.
Details of Cost for : 7.00 Sqm
Code
Description
Unit
Quantity
MATERIAL
12 mm thick particle board = 7.00 sqm
Add 5% waistage = 0.35 sqm.
7480
Total =7.35 sqm
sqm
7.35
9999
Carriage of particle board
L.S.
13.65
9999
Sundries & screws etc.
L.S.
27.30

DSR-12

Rate

720.00
1.49
1.49

Page 1050 of 2298

0112
0114

LABOUR:
Carpenter 2nd class
Beldar

Day
Day

0.90
1.00

Add water charges @ 1% on

273.00
247.00
Total:
5845.72

Add C.P & OH @15% on

5904.18
Cost for 7.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 969.97
Rs 969.95

Item Code: 21.3.1

P/F glazing in aluminium door, window, ventilator shutters etc. complete.: With float glass panes of 4.0mm thickness

Code

Description

Details of Cost for : 1.00 Sqm

Unit
Quantity

Rate

MATERIALS:
FloatGlass panes 4.00 mm thick 1.00 sqm
Add for waistage and brecakage 10%-0.10 sqm.
Total =1.10 sqm. sqm
2406
9999

Glass sheet 4mm thick (wt. not less than 10Kg/sqm)

Carriage of glass

7390

Neoprin/ EPDM rubber gasket

LABOUR :
Carpenter II class
Beldar
Sundries and carriage of gasket

0112
0114
9999

sqm

1.10

310.00

L.S.
metre

2.42
6.00

1.49
25.00

Day
Day

0.23
0.23

273.00
247.00

L.S.

6.89

1.49
Total:
624.48

Add water charges @ 1% on

Add C.P & OH @15% on

630.72
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 725.33
Rs 725.35

Item Code: 21.3.2

P/F glazing in aluminium door, window, ventilator shutters etc. complete.: With float glass panes of 5.5mm thickness

Code

2407
9999
7390
0112
0114
9999

Description
MATERIAL
Glass panes 5.50 mm thick = 1.00 sqm
Add for waistage and brcakge 10%= 0.10 sqm
Total =1.00 sqm
Carriage of glass
Neoprene/ PVC gasket
LABOUR:
Glazier
Beldar
Sundries and carriage of gasket

Details of Cost for : 1.00 Sqm

Unit
Quantity

sqm
L.S.
metre

1.10
3.33
6.00

450.00
1.49
25.00

Day
Day
L.S.

0.23
0.23
6.89

273.00
247.00
1.49
Total:
779.83

Add water charges @ 1% on

DSR-12

Rate

Page 1051 of 2298

Add C.P & OH @15% on

787.63
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 905.77
Rs 905.75

Item Code: 21.3.3

P/F glazing in aluminium door, windows, partitions etc. With glass panes 8 mm thick.
Details of Cost for : 1.00 Sqm
Code
Description
Unit
Quantity
MATERIAL
A Float Glass Pones 8.00 mm thick = 1.00 sqm
Add for waistage and brcakge 10%= 0.10 sqm
2406
Total =1.10 sqm
sqm
1.10
9999
Carriage of glass
L.S.
3.33
7390
Neoprene/ PVC gasket
metre
6.00
LABOUR:
0112
Glazier
Day
0.23
0114
Beldar
Day
0.23
9999
Sundries and carriage of gasket
L.S.
6.89
Add water charges @ 1% on

Rate

310.00
1.49
25.00
273.00
247.00
1.49
Total:
625.83

Add C.P & OH @15% on

632.09
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 726.90
Rs 726.90

Item Code: 21.4.1

P/F double acting hydralic door floor spring With Stainless steel cover plate.
Code
7394
9999
9999
04.001.03

0123
0124
0112
0114

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIAL
Double action hydraulic floor spring with sfainlessysteel cover
plate
Carriage
Sundries and screws
Cement concrete 1:2:4
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
LABOUR:
For cutting hole and making it good
Mason 1st class
Mason 2nd class
Carpenter 2nd class for fixing
Beldar

Rate

each

1.00

1525.00

L.S.
L.S.

13.00
26.00

1.49
1.49

0.002

4514.03

0.08
0.08
0.01
0.17

301.00
273.00
273.00
247.00
Total:
1673.75

Day
Day
Day
Day

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

1690.49
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1953.09
Rs 1953.10

Item Code: 21.4.2

DSR-12

Page 1052 of 2298

P/F double acting hydralic door floor spring With brass cover plate.
Code
7396
9999
9999
04.001.03

0123
0124
0112
0114

Details of Cost for : 1.00 No.

Unit
Quantity

Description
MATERIAL
Double action hydraulic floor spring with brass cover plate
Carriage
Sundries and screws
Cement concrete 1:2:4
P/L CC excluding centering - All work up to plinth level: 1:2:4 Coarse sand, 20mmstone a
LABOUR:
For cutting hole and making it good
Mason 1 st class
Mason 2nd class
Carpenter 2nd class for fixing
Beldar

Rate

each

1.00

1675.00

L.S.
L.S.

13.00
26.00

1.49
1.49

0.002

4514.03

0.08
0.08
0.01
0.17

301.00
273.00
273.00
247.00
Total:
1823.75

Day
Day
Day
Day

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

1841.99
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2127.32
Rs 2127.30

Item Code: 21.5

P/F powder coated aluminium work in false ceiling with aluminium tees, angles
Details of Cost for : 6.35 Kg
Code
Description
Unit
Quantity
Details of cost for 6.35 kg (2.40x2.40 = 5.76 sqm)
MATERIAL
(i) Aluminium main runner - assuming Tee of size 35x23.5x1.5
mm @ 600 mm centre to centre 3.00x2.40m, =7.20m

7306
0589
7048

DSR-12

Extra for light fittings

2x1.20 m = 2.40 m
= 9.60 m @ 0.247 kg/m = 2.370 kg
Aluminium cross runner - assuming Tee of size 35x23.5x1.5
mm @ 600 mm centre to centre
3x4x0.60 m = 7.20 m
(-) 2x0.30 = (-) 0.60 m
=6.60 m @ 0.247 kg/m = 1.630 kg
Perimeter angle aluminium - assuming size
25.4x25.4xl .63 mm @ 600 mm centre to centre
4x2.40 m = 9.60 m @ 0.213 kg/m = 2.045 kg
(ii) CLEATS
Aluminium angle- assuming size
25.4x25.4xl.63 mm
Extra for light fittings =3x2x2 = 12.00
Corner = 4.00
For joining runners = 42.00
= 58.00x0.025 = 1.45 m@ 0.213 kg/m = 0.309 kg
Sub total =6.354 kg
Add 5% wastage = 0.318 kg
= 6.672 kg
kilog
(iii) C.P. brass/ stainless steel screws 20 mm
100 N
for angle cleats
(iv) Rawl plug for fixing perimeter angles
each

Rate

6.672
1.16

220.00
100.00

24.00

10.00

Page 1053 of 2298

7392

Epoxy powder coating 50 microns on aluminium sections,

kilog

6.67

64.00

9999
9999

(vi) Carriage of material

(vii) C.P. brass screws for fixing frame with suspenders
LABOUR
For fabrication and erection
Carpenter 1st class
Beldar
Scaffolding and sundries

L.S.
L.S.

13.00
13.00

1.49
1.49

Day
Day
L.S.

0.64
0.64
13.00

301.00
247.00
1.49
Total:
2544.71

0111
0114
9999

Add water charges @ 1% on

Add C.P & OH @15% on

2570.16
Cost for 6.35 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 465.46
Rs 465.45

Item Code: 21.6

P/F 6 mm dia GI level adjusting hangers.
Code

7395

0992
7388
9999
0111
0114

Description
Details of cost for 23 nos (hangers in 2.40 mx 2.40 m = 5.76
sqm)one number
MATERIAL
6 mm dia G.I. adjustable hangers including clips (upto 1.20
metre length)
For light fiting 2x4=8.00 Nos
For runners = 15.00
total = 23.00 Nos
6 mm dia. G.I. adjustable hangers including clips (upto 1.2 m
length)
Ceiling cleats
G.I. flat 40X3 mm 60mm long
23x0.06= [email protected]/m= 1.31kg
Add 5% wastage = 0.07 kg
= 1.38 kg
Dash fastner 12.5 mm dia 40 mm long with 6 mm dia bolts
Carriage of materials
LABOUR:
Carpenter 1 st class
Beldar

Details of Cost for : 23.00 Nos

Unit
Quantity

Rate

each

23.00

28.00

quint
each

0.014
23.00

4750.00
48.00

L.S.

5.20

1.49

Day
Day

0.35
0.27

301.00
247.00
Total:
1994.29

Add water charges @ 1% on

Add C.P & OH @15% on

2014.23
Cost for 23.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 100.71
Rs 100.70

Item Code: 21.7.1

P/F machine moulded aluminium covering over expansion joints on vertical surface/ ceiling:- Anodised aluminium sheet 2.5 mm
thick.
Details of Cost for : 7.00 Kg
Code
Description
Unit
Quantity
Rate
MATERIAL

DSR-12

Page 1054 of 2298

2704
7389
7347

Anodised aluminium sheet 2.5 mm thick, 170 mm wide

5.88m x0.17m = 1.00 sqm @ 7.00 Kg/sqm
= 7.00kg
Add 5% wastage = 0.035 kg
Total = 7.35 kg
kilog
Anodising 15 microns on aluminium sections
kilog
Cadmium plated full threaded steel screws 30 mm x 4 mm dia 100 N

7.35
7.35
30.00

210.00
40.00
28.00

7348
8776

Aluminium washers 2 mm 15 mm dia

100 N
Stainless steel dash fastener of 8 mm dia and 75 mm long bolt Nos

30.00
30.00

10.00
20.00

9999

Carriage of materials
LABOUR
Carpenter 2nd class
Beldar
Sundries including machine work

L.S.

6.50

1.49

Day
Day
L.S.

0.392
0.392
21.45

273.00
247.00
1.49
Total:
2694.39

0112
0114
9999

Add water charges @ 1% on

Add C.P & OH @15% on

2721.33
Cost for 7.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 447.08
Rs 447.05

Item Code: 21.7.2

P/F machine moulded aluminium covering over expansion joints on vertical surface/ ceiling:- Powder coated aluminium sheet 2.5
mm thick.
Details of Cost for : 7.00 Kg
Code
Description
Unit
Quantity
Rate
MATERIAL
Anodised aluminium sheet 2.5 mm thick, 170 mm wide
5.88 mm x0.17m =1.00 m@ 7.00kg/sqm wide
Add 5% wastage = 0.35 kg
2704
Total = 7.35 kg
kilog
7.35
210.00
7392
Epoxy powder coating 50 microns on aluminium sections.
kilog
7.35
64.00
7347

Cadmium plated full threaded steel screws 30 mm x 4 mm dia 100 N

30.00

28.00

7348
8776

Aluminium washers 2 mm 15 mm dia

100 N
Stainless steel dash fastener of 8 mm dia and 75 mm long bolt Nos

30.00
30.00

10.00
20.00

9999

Carriage of materials
LABOUR
Carpenter 2nd class
Beldar
Sundries including machine work

L.S.

6.50

1.49

Day
Day
L.S.

0.392
0.392
21.45

273.00
247.00
1.49
Total:
2870.79

0112
0114
9999

Add water charges @ 1% on

Add C.P & OH @15% on

2899.50
Cost for 7.00 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 476.35
Rs 476.35

Item Code: 21.8.1

DSR-12

Page 1055 of 2298

Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work with weather silocon sealent: Upto 5 mm depth, 5
mm width.
Details of Cost for : 1.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
8646
Silicon sealant (i/c 5% wastage)
cartr
0.087
307.00
8654
Masking tape.
metre
2.00
1.55
9999
Sundries & profile
L.S.
2.60
1.49
9999
Labour
L.S.
20.80
1.49
Total:
Add water charges @ 1% on
64.67
Add C.P & OH @15% on
65.32
Cost for 1.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 75.12
Rs 75.10

Item Code: 21.9.1

Extra for applying additional coating AC 25 instead of AC 15 For fixed portion.
Details of Cost for : 41.09 Kg
Code
Description
Unit
Quantity
7391
Anodising 25 microns on aluminium sections
kilog
41.09
7389
Anodising 15 microns on aluminium sections
kilog
-41.09
Add water charges @ 1% on

Rate
50.00
40.00
Total:
410.90

Add C.P & OH @15% on

415.01
Cost for 41.09 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 11.61
Rs 11.60

Item Code: 21.9.2

Extra for applying additional coating AC 25 instead of AC 15 For shutter of doors, windows and ventilators.
Details of Cost for : 21.65 Kg
Code
Description
Unit
Quantity
7391
Anodising 25 microns on aluminium sections
kilog
21.65
7389
Anodising 15 microns on aluminium sections
kilog
-21.65
Add water charges @ 1% on

Rate
50.00
40.00
Total:
216.50

Add C.P & OH @15% on

218.67
Cost for 21.65 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 11.62
Rs 11.60

Item Code: 21.10

P/F double glazed hermetically sealed glazing in aluminium windows,ventilatorsm partition etc with 6mm thick clear float glass
both side having 12 mm gap, EPDM gasket, perforated aluminium spacers, desiccants, sealant etc.

Code

Description

Details of Cost for : 1.00 Sqm

Unit
Quantity

Rate

MATERIAL
Hermetically sealled double glazed unit made with 6mm thick
clear float glass both side

DSR-12

Page 1056 of 2298

8648
9999
7390
0112
0114
9999

having 12 mm air gap. = 1.00 sqm

Add for wastage & breakage @ 10% = 0.10sqm
Total =1.10sqm
Hermetically sealled double glazed unit made with 6mm thick
clear float glass both side ha
Carriage of glass
Neoprin/EPDM rubber gasket
Glazier
Beldar
Sundries and carriage of gasket

sqm

1.10

2290.00

L.S.
metre
Day
Day
L.S.

6.66
6.00
0.23
0.46
6.89

1.49
25.00
273.00
247.00
1.49
Total:
2865.60

Add water charges @ 1% on

Add C.P & OH @15% on

2894.26
Cost for 1.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 3328.40
Rs 3328.40

Item Code: 21.11.1

P/F stainless steel adjustable friction windows stays 205 x 19 mm.
Code
8649
8647
9999
0112
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
MATERIAL
Stainless steel (SS 304 grade) adjustable friction window stay.
205 x 19mm
Stainless steal screws 30mm x4mm.
Carriage
LABOUR:
Carpenter 2nd class
Beldar

Rate

each

10.00

168.00

cent
L.S.

0.40
2.73

29.00
1.49

Day
Day

0.14
0.14

273.00
247.00
Total:
1768.47

Add water charges @ 1% on

Add C.P & OH @15% on

1786.15
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 205.41
Rs 205.40

Item Code: 21.11.2

P/F stainless steel adjustable friction windows stays 255 x 19 mm.
Code
8650
8647
9999
0112
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
MATERIAL
Stainless steel (SS 304 grade) adjustable friction window stay
255 x 19mm
Stainless steal screws 30mm x4mm.
Carriage
LABOUR:
Carpenter 2nd class
Beldar

Rate

each

10.00

189.00

cent
L.S.

0.40
2.73

29.00
1.49

Day
Day

0.14
0.14

273.00
247.00
Total:
1978.47

Add water charges @ 1% on

Add C.P & OH @15% on

1998.25
Cost for 10.00 Nos

DSR-12

Page 1057 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 229.80
Rs 229.80

Item Code: 21.11.3

P/F stainless steel adjustable friction windows stays 355 x 19 mm.
Code
8651
8647
9999
0112
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
MATERIAL
Stainless steel (SS 304 grade) adjustable friction window stay.
355 x 19mm
Stainless steal screws 30mm x4mm.
Carriage
LABOUR:
Carpenter 2nd class
Beldar

Rate

each

10.00

236.00

cent
L.S.

0.40
2.73

29.00
1.49

Day
Day

0.14
0.14

273.00
247.00
Total:
2448.47

Add water charges @ 1% on

Add C.P & OH @15% on

2472.95
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 284.39
Rs 284.40

Item Code: 21.11.4

P/F stainless steel adjustable friction windows stays 510 x 19 mm.
Code
8652
8647
9999
0112
0114

Details of Cost for : 10.00 Nos

Unit
Quantity

Description
MATERIAL
Stainless steel (SS 304 grade) adjustable friction window stay.
510x19mm
Stainless steal screws 30mm x4mm.
Carriage
LABOUR:
Carpenter 2nd class
Beldar

Rate

each

10.00

437.00

cent
L.S.

0.40
2.73

29.00
1.49

Day
Day

0.14
0.14

273.00
247.00
Total:
4458.47

Add water charges @ 1% on

Add C.P & OH @15% on

4503.05
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 517.85
Rs 517.85

Item Code: 21.11.5

P/F stainless steel adjustable friction windows stays 710 x 19 mm.
Code
8653
8647
9999
0112
0114

DSR-12

Description
MATERIAL
Stainless steel (SS 304 grade) adjustable friction window stay.
710 x 19mm
Stainless steel screws 30mm x4mm.
Carriage
LABOUR:
Carpenter 2nd class
Beldar

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

each

10.00

793.00

cent
L.S.

0.40
2.73

29.00
1.49

Day
Day

0.14
0.14

273.00
247.00

Page 1058 of 2298

Add water charges @ 1% on

Total:
8018.47

Add C.P & OH @15% on

8098.65
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 931.35
Rs 931.35

Item Code: 21.12.1

P/F aluminium tubular handle bar 32 mm O/D, 3.0 mm thick and 2100 mm long Anodized Aluminium tubular
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Rate
Details of cost for 10 nos handle bar.
MATERIALS
10x22/7 x 1/4 (0.032x0.032 - 0.026 x 0.026) x 2.10 = 0.0057
cum
0.0057 cum @ 2710 kg/ cum = 15.56kg
Add 5% wastage 0.78 kg
Total 16.34 kg
7306
Aluminium T or L sections
kilog
16.34
220.00
7389
Anodising 15 microns on aluminium sections
kilog
16.34
40.00
9999
Carriage of material
L.S.
4.42
1.49
8647
Stainless steal screws 30mm x4mm.
cent
0.08
29.00
LABOUR
0111
Carpenter 1st class.
Day
0.125
301.00
Total:
Add water charges @ 1% on
4294.94
Add C.P & OH @15% on
4337.89
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 498.86
Rs 498.85

Item Code: 21.12.2

P/F aluminium tubular handle bar 32 mm O/D, 3.0 mm thick and 2100 mm long Powder coated Aluminium tubular
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
Rate
Details of cost for 10 nos handle bar.
MATERIALS
10x22/7 x 1/4 (0.032x0.032 - 0.026 x 0.026) x 2.10 = 0.0057
cum
0.0057 cum @ 2710 kg/ cum = 15.56kg
Add 5% wastage = 0.78 kg
Total = 16.34 kg
7306
Aluminium T or L sections
kilog
16.34
220.00
7392
Epoxy powder coating 50 micron on aluminium sections.
kilog
16.34
64.00
9999
8647
0111

Carriage of material
Stainless steal screws 30mm x4mm.
LABOUR
Carpenter 1 st class

L.S.
cent

4.42
0.08

1.49
29.00

Day

0.125

301.00
Total:
4687.10

Add water charges @ 1% on

Add C.P & OH @15% on

4733.97
Cost for 10.00 Nos

DSR-12

Page 1059 of 2298

Rate per Each:

Rate as per DSR-12:

Rs 544.41
Rs 544.40

Item Code: 21.12.3

P/F aluminium tubular handle bar 32 mm O/D, 3.0 mm thick and 2100 mm long Polyester Powder coated Aluminium tubular

Code

7306
7393
9999
8647
0111

Description
Details of cost for 10 nos handle bar.
MATERIALS
10x22/7 x 1/4 (0.032x0.032 - 0.026 x 0.026) x 2.10 = 0.0057
0.0057 cum @ 2710 kg/cum = 15.56kg
Add 5% wastage = 0.78 kg
Total =16.34 kg
Aluminium T or L sections
Polyester powder coating 50 microns on aluminium sections
Carriage of material
Stainless steal screws 30mm x4mm.
LABOUR
Carpenter 1 st class

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

kilog
kilog

16.34
16.34

220.00
70.00

L.S.
cent

4.42
0.08

1.49
29.00

Day

0.125

301.00
Total:
4785.14

Add water charges @ 1% on

Add C.P & OH @15% on

4832.99
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 555.79
Rs 555.80

Item Code: 21.13

P/F 100 mm brass locks for aluminium doors.
Code
7001

0111
9999

Details of Cost for : 1.00 No.

Unit
Quantity

Description

MATERIALS
Brass 100 mm mortice latch and lock with 6 levers without each
pair of handles
LABOUR
Carpenter 1 st class
Day
Sundries and screws
L.S.

Rate

1.00

250.00

0.17
3.64

301.00
1.49
Total:
306.59

Add water charges @ 1% on

Add C.P & OH @15% on

309.66
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 356.11
Rs 356.10

Item Code: 21.14

P/F anodised aluminium sub frame work for windows and ventilators
Code

Description

Details of Cost for : 4.082 Kg

Unit
Quantity

Rate

MATERIALS:
Aluminium Section

DSR-12

Page 1060 of 2298

(i) External member of the frame (Jindal section no TU/ 3644)

7306
0589
7389
9999

0116
0139
0114
0100
9999

V = 2x2.00 = 4.00 m
H = 2x1.20 = 2.40 m
= 6.40 m @ 0.607 kg/m = 3.885kg
Angle cleat 38x38x4.8 mm 50 mm long
4x0.05 = 0.200 m @ 0.985 kg/m = 0.197 kg
sub total = 4.082kg.
Add 5% wastage = 0.204kg
Total = 4.276kg
C.P. brass /stainless steel screws 20 mm for cleat angle.
Anodising
Carriage of material
LABOUR
For fabrication of frame
Fitter
Beldar (Special)
Beldar
Bandhani
Labour for drilling holes, hire charges of drill,

kilog
100 N
kilog
L.S.

Day
Day
Day
Day
L.S.

4.286
8.00
4.286
5.20

220.00
100.00
40.00
1.49

0.04
0.04
0.02
0.01
5.20

301.00
260.00
247.00
260.00
1.49
Total:
1167.84

Add water charges @ 1% on

Add C.P & OH @15% on

1179.52
Cost for 4.082 Kg
Rate per One Kg:
Rate as per DSR-12:

Rs 332.30
Rs 332.30

Item Code: 21.15.1

P/F aluminium casement windows fasteners for aluminium windows Anodized Aluminium.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
MATERIALS
8660
Aluminium casement window fastner (Anodised AC 15 )
each
10.00
8666
Stainless steel screws 25mm x4mm
cent
0.40
LABOUR
0111
Carpenter 1st class
Day
0.06
9999
Carriage of materials
L.S.
2.73
Add water charges @ 1% on

Rate
40.00
32.00
301.00
1.49
Total:
434.93

Add C.P & OH @15% on

439.28
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 50.52
Rs 50.50

Item Code: 21.15.2

P/F aluminium casement windows fasteners for aluminium windows Powder coated Aluminium.
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
MATERIALS
8661
Aluminium casement window fastner (powder coated).
each
10.00
8666
Stainless steel screws 25mm x4mm
cent
0.40
LABOUR
0111
Carpenter 1 st class
Day
0.06
9999
Carriage of materials
L.S.
2.73

DSR-12

Rate
41.00
32.00
301.00
1.49

Page 1061 of 2298

Add water charges @ 1% on

Total:
444.93

Add C.P & OH @15% on

449.38
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 51.68
Rs 51.70

Item Code: 21.15.3

P/F aluminium casement windows fasteners for aluminium windows Polyester Powder coated Aluminium
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
MATERIALS
8662
Aluminium casement window fastner (polyester powder each
10.00
coated).
8666
Stainless steel screws 25mm x4mm
cent
0.40
LABOUR
0111
Carpenter 1st class
Day
0.06
9999
Carriage of materials
L.S.
2.73
Add water charges @ 1% on

Rate
42.00
32.00
301.00
1.49
Total:
454.93

Add C.P & OH @15% on

459.48
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 52.84
Rs 52.85

Item Code: 21.16.1

P/F aluminium round shape handle of O/D 100 mm Anodized Aluminium.
Code
8663
8666
0111
9999

Description
MATERIALS
Aluminium round shape handle (anodised AC 15)
Stainless steel screws 25mm x4mm
LABOUR
Carpenter 1 st class
Carriage of materials

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

each
cent

10.00
0.40

49.00
32.00

Day
L.S.

0.06
2.73

301.00
1.49
Total:
524.93

Add water charges @ 1% on

Add C.P & OH @15% on

530.18
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 60.97
Rs 60.95

Item Code: 21.16.2

P/F aluminium round handles - 100mm dia - powder coated
Code
8664
8666
0111

DSR-12

Description
MATERIALS
Aluminium round shape handle (powder coated)
Stainless steel screws 25mm x4mm
LABOUR
Carpenter 1 st class

Details of Cost for : 10.00 Nos

Unit
Quantity

Rate

each
cent

10.00
0.40

54.00
32.00

Day

0.06

301.00

Page 1062 of 2298

9999

Carriage of materials

L.S.

2.73

Add water charges @ 1% on

1.49
Total:
574.93

Add C.P & OH @15% on

580.68
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 66.78
Rs 66.80

Item Code: 21.16.3

P/F aluminium round shape handle of O/D 100 mm Polyester Powder coated Aluminium
Details of Cost for : 10.00 Nos
Code
Description
Unit
Quantity
MATERIALS
8665
Aluminium round shape handle (polyester powder coated).
each
10.00

59.00

8666
0111
9999

Stainless steel screws 25mm x4mm

LABOUR
Carpenter 1st class
Carriage of materials

Rate

cent

0.40

32.00

Day
L.S.

0.06
2.73

301.00
1.49
Total:
624.93

Add water charges @ 1% on

Add C.P & OH @15% on

631.18
Cost for 10.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 72.59
Rs 72.60

Item Code: 21.17

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum
anodic coating of grade AC 15) of approved design/pattern ...

Code

8774
9999

0116
0139
0114
0100
9999

Description
MATERIALS:
Aluminium grill = 10 kg
Add wastage @ 20% = 2 kg
Total = 12.00 kg
Aluminium Grill (anodised)
Carriage
LABOUR:
for fixing
Fitter (grade 1)
Skilled Beldar (for floor rubbing etc.)
Beldar
Bandhani
Sundries

Details of Cost for : 10.00 Kg

Unit
Quantity

Rate

Kg
L.S.

12.00
11.00

250.00
1.49

Day
Day
Day
Day
L.S.

0.50
0.25
0.25
0.05
25.00

301.00
260.00
247.00
260.00
1.49
Total:
3343.89

Add water charges @ 1% on

Add C.P & OH @15% on

3377.33
Cost for 10.00 Kg
Rate per One Kg:
Rate as per DSR-12:

DSR-12

Rs 388.39
Rs 388.40

Page 1063 of 2298

Item Code: 21.18

P/F 12 mm thick frameless toughened glass door shutter including providing and fixing top & bottom pivot & spring type fixing
arrangement and making necessary holes etc. ..
Details of Cost for : 2.10 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
Glass = 2.10 sqm
Add wastage @ 10% = 0.21 sqm
Total = 2.31 Sqm
8778
Toughened glass 12 mm thickness
Sqm
2.31
1800.00
9999
Carriage of glass panes and other materials
L.S.
8.19
1.49
9999
Methylated spirit
L.S.
5.33
1.49
Stainless steel pivot and spring type fixing
21.004.01 P/F double acting hydralic door floor spring With Stainless Nos
2.00
1953.09
steel cover plate.
LABOUR:
0119
Glazier
Day
0.90
273.00
0114
Beldar
Day
0.90
247.00
9999
Sundries, sush rog cotton etc.,
L.S.
1.13
1.49
Total:
Add water charges @ 1% except on [A] i.e on
4647.82
Add C.P & OH @15% except on [A] i.e on
4694.30
Cost for 2.10 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 4430.78
Rs 4444.75

Item Code: 22.1.1

P/F integral cement based treatment for water proofing on horizontal surface at all depth below ground
structures: Using rough kota stone.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
MATERIAL
Ist layer
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.25
(Rate as per item no. 3.8)
1169
Kota stone slab = 10 sqm
Sqm
11.00
Wastage @ 10% = 1sqm
Total = 11 sqm
2216
Cartage 11x0.025 @2330 kg/cum = 0.64 t
tonne
0.64
Cement mortar 1:3
10x0.025 = 0.25 cum
Wastage @ 12% = 0.03 cum
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.28
Cement for slurry Bed
2x10.00 @ 2kg/cum = 40.00 kg
Joints
4x3.7x0.02x0.037 = 0.011 cum
25x0.6x0.02x0.037 = 0.011 cum
= 0.022 cum @ 1440 kg/cum =31.68 kg
0367
Total = 71.88 kg or 0. 72 t
tonne
0.072
2209
Carriage of cement
tonne
0.072
Water proofing material
Mortar = 0.25 + 0.28 = 0.53 cum
Cement in 0.53 cum @ 5.1 q/cum = 2.7 quintal
Cement in slurry = 0.73 quintal
= 3.43 quintal @ 1 kg for 50 kg of cement

DSR-12

level for under ground

Rate

4145.53
175.00

77.87

4145.53

5000.00
77.87

Page 1064 of 2298

1213
0296
2202
0125
0114
0115
0125
0114
0101
9999

i.e. 6.86 kg
12 mm stone grit @ 8 cudm/sqm
1x10.3x8x1/1000 = 0.08 cum
Carriage
Labour for base mortar & kota stone laying i/c slurry job
Mason 2nd class
Beldar
Coolie
Labour for top layer & spreading stone grit
Mason 2nd class
Beldar
Bhisti
Sundries

kilog

6.86

25.00

cum

0.08

1050.00

cum
Day
Day
Day

0.08
1.20
1.00
1.00

87.60
273.00
247.00
247.00

Day
Day
Day
L.S.

1.08
1.08
0.45
6.24

273.00
247.00
260.00
1.49
Total:
6309.59

Add water charges @ 1% on

Add C.P & OH @15% on

6372.69
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 732.86
Rs 732.85

Item Code: 22.2.1

P/L integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 20 to 25 mm thick with
cement slurry with cement mortar 1 : 3. Using rough kota stone.

Code

1169
2216

0367
2209
13.009.02

1213

0125
0114
0115
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description
MATERIAL
1st layer
Kota stone slab = 10 sqm
Wastage 10% = 1 sqm
Total = 11 sqm
Cartage 11x0.025 @ 2330 kg/cum = 0.64t
Cement slurry for jointing
6x3.70 = 22.20 m
7x2.78= 19.46 m
=41.66x0.025x0.012 = 0.013 cum
Cement slurry for filling 20 mm gap
10x0.02 = 0.200 cum
= 0.213 cum @ 1440 kg/cum = 306.70 kg or 0.307 t
Carriage
Cement plaster 1:3 with neat cement punning)
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a
floating coat of neat cement.
Water proofing material
Cement slurry = 0.31 t = 310 kg
Cement plaster 1:3 @ 13.62 q/100sqm = 136.20 kg
Total = 446.20 kg @ 1 kg for 50 kg of cement i.e. 8.90 kg
LABOUR
Fixing of Kota stone and applying cement & applying slurry.
Mason 2nd class
Beldar
Coolie
Sundries and scaffolding

Sqm
tonne

11.00
0.64

175.00
77.87

tonne
tonne

0.31
0.31

5000.00
77.87

10.00

233.79

kilog

8.90

25.00

Day
Day
Day
L.S.

3.00
3.00
1.00
18.20

273.00
247.00
247.00
1.49
Total:
5605.60

Add water charges @ 1% except on [A] i.e on

DSR-12

Rate

Page 1065 of 2298

Add C.P & OH @15% except on [A] i.e on

5661.66
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 884.88
Rs 884.90

Item Code: 22.3

P/L water proofing treatment to vertical and horizontal surfaces of depressed of W.C, kitchen ...
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIAL
0367
Cement slurry @ 4.4 kg/sqm = 44.00 kg or 0.044 t
tonne
0.044
5000.00
2209
Carriage
tonne
0.044
77.87
Cement plaster 1:3 (20 mm thick)
MATERIALS :
03.008
Cement mortar 1:3 (1 cement : 3 coarse sand)
0.224
4145.53
LABOUR
0155
Mason
Day
0.94
287.00
0115
Coolie
Day
1.02
247.00
0101
Bhisti
Day
1.10
260.00
9999
Scafolding and sundries
L.S.
12.61
1.49
Bitumen blown or/and residual bitumen
0313
= 10x1.70= 17 kg = 0.017 t
tonne
0.017
37000.00
2211
Carriage
tonne
0.017
87.60
3002
PVC 400 micron thick sheet
sqm
10.00
31.00
9999
Carriage
L.S.
13.00
1.49
Water proofing compound @ 1 kg per 50 kg of cement used
Cement slurry = 44 kg
Cement plaster 1:3
10x(13.62xl00)/100= 136.2 kg
1213
Total = 180.2 kg/50 = 3.60 kg
kilog
3.60
25.00
LABOUR
0131
Painter
Day
0.20
273.00
0114
Beldar
Day
1.33
247.00
0130
Mistry
Day
0.06
301.00
9999
Sundries
L.S.
7.28
1.49
Total:
Add water charges @ 1% on
3440.42
Add C.P & OH @15% on
3474.82
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 399.60
Rs 399.60

Item Code: 22.4.1

P/P in position suitable PVC water stops conforming to IS: 12200 for constructions/ expansion joints: Serrated with central bulb
(225 mm wide, 8-11mm thick).
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
7427
Water stop serreted with bulb
metre
100.00
390.00
LABOUR
0114
Beldar
Day
2.00
247.00
9999
Sundries & wire etc.
L.S.
26.00
1.49
Total:
Add water charges @ 1% on
39532.74

DSR-12

Page 1066 of 2298

Add C.P & OH @15% on

39928.07
Cost for 100.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 459.17
Rs 459.15

Item Code: 22.4.2

P/P in position suitable PVC water stops conforming to IS: 12200 for constructions/ expansion joints: Dumb bell with central bulb
(180 mm wide, 8 mm thick).
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
7428
Water stops Dumb bell with central bulb
metre
100.00
351.00
LABOUR
0114
Beldar
Day
2.00
247.00
9999
Sundries & wire etc.
L.S.
26.00
1.49
Total:
Add water charges @ 1% on
35632.74
Add C.P & OH @15% on
35989.07
Cost for 100.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 413.87
Rs 413.85

Item Code: 22.4.3

P/P in position suitable PVC water stops conforming to IS: 12200 for constructions/ expansion joints: Kickers (320 mm wide, 5 mm
thick).
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIAL
7429
Kickers (320 mm wide, 5 mm thick)
metre
100.00
360.00
LABOUR
0114
Beldar
Day
2.00
247.00
9999
Sundries & wire etc.
L.S.
26.00
1.49
Total:
Add water charges @ 1% on
36532.74
Add C.P & OH @15% on
36898.07
Cost for 100.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 424.33
Rs 424.35

Item Code: 22.5

P/L water proofing treatment in sunken portion of WC's bathroom etc. by applying cement slurry mixed with water proofing
cement compound
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
Cement 10x(0.488 + 0.242) = 7.30 kg
Sealing fillets10 x 0.5 kg =5.00kg

DSR-12

0367

Total = 12.30 kg = 0.012 tonne

2209

Carraige of Cement
Bonding material 1.6 kgx30x2 = 96 kg

tonne
tonne

0.012
0.012

5000.00
77.87

Page 1067 of 2298

Bitumen (blown/residual type)

10x(0.25+0.126) = 3.79kg
Sealing fillets 10x0.10 kg / sqm = 1.00 kg
Wastage @ 5% on 4.79 kg = 0.24 kg
8501

Total = 5.03 kg Say 5.00 kg

0155
0114
0101
9999

LABOUR :
Mason (average)
Beldar
Bhisti
Sundries, brushes etc

kilog

5.00

127.00

Day
Day
Day

2.00
2.00
0.25

287.00
247.00
260.00

L.S.

15.60

1.49
Total:
1852.17

Add water charges @ 1% on

Add C.P & OH @15% on

1870.69
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 215.13
Rs 215.15

Item Code: 22.6

P/L water proofing treatment on roofs of slab by applying cement slurry mixed with water proofing cement compound Consisting of
applying:
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIAL
Cement 10x (1.289 + 0.488) = 17.77 kg
Sealing fillets @ 10% = 1.77 kg
0367
Total = 19.54kg = 0.020 tonne
tonne
0.02
5000.00
2209
Carriage of Cement
tonne
0.02
77.87
Bonding material 1.6 kgx30x2 = 96 kg
Bitumen (blown/residual type)
10x(0.253+0.67) = 9.23kg
Wastage 5% = 0.46 kg
8501
Total = 9.69 kg
kilog
9.69
127.00
Fibre Glass cloth = 10.00 sqm
Wastage 10 % - 1.00 sqm
8502
Total = 11.00 sqm
sqm
11.00
39.00
LABOUR
0155
Mason (average)
Day
2.00
287.00
0114
Beldar
Day
1.00
247.00
0101
Bhisti
Day
0.25
260.00
9999
Sundries, brushes etc
L.S.
23.40
1.49
Total:
Add water charges @ 1% on
2682.06
Add C.P & OH @15% on
2708.88
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 311.52
Rs 311.50

Item Code: 22.7.1

P/l integral cement based water proofing treatment : With average thickness of 120mm and minimum thickness at khurra as 65
mm.
Details of Cost for : 10.00 Sqm

DSR-12

Page 1068 of 2298

Code
0367
03.010

0285
2260
03.010
0114
0101
0123
0124
0128
0114
9999
0367
0114
13.006.01

1213

7233

0124
0114
9999
0124
0114
0101

Description
i) Cement slurry
Cement
Cement mortar 1:5 (1 cement : 5 coarse sand)
iii) Roof treatment with brick bats and cement mortar
MATERIALS:
Brick bats/ brick aggregate
Carriage
Cement mortar 1:5 (1 cement : 5 coarse sand)
LABOUR
Beldar
Bhishti
Mason 1 st class
Mason 2nd class
Mate
Extra labour for ramming
Beldar
Sundries
iv) Cement slury
Cement
Beldar
v) 20 mm cement plaster 1:4(1 cement: 4 coarse sand)
20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
vi) Water proofing compound
27.50+27.50+69.40+124.00 = 248.40 kg @
1 kg per bag of cement
Extra for making chequers for 10 sqm
Fibre glass tissue reinforcement Type IIGrade I
LABOUR:
Mason 2nd class
Beldar
Chequer plate
Add labour for laying 20 mm bed mortar
Mason 2nd class
Beldar
Bhishti
TOTAL

Unit

Quantity

Rate

0.0275
0.224

5000.00
3129.96

cum
cum

0.94
0.94
0.50

475.00
95.22
3129.96

Day
Day
Day
Day
Day

1.75
0.28
0.05
0.05
0.04

247.00
260.00
301.00
273.00
260.00

Day
L.S.

0.25
13.65

247.00
1.49

0.0275
0.20

5000.00
247.00

10.00

186.68

kilog

5.00

25.00

sqm

10.50

65.00

Day
Day
L.S.

0.36
0.36
13.65

273.00
247.00
1.49

Day
Day
Day

0.54
0.54
0.45

273.00
247.00
260.00
Total:
5165.58

tonne

tonne
Day

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

5217.24
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 786.66
Rs 786.70

Item Code: 22.8.1

P/L four courses water proofing with : bitumen felt (hessian base) type 3 grade I.
Details of Cost for : 30.00 Sqm
Code
Description
Unit
Quantity
Rate
Blown or / and residual bitumen applied hot
0313
= 2x1.45x30 = 87 kg
tonne
0.087
37000.00
Hession felt type 3 Grade I
(hessian base self finished bitumen felt) = 30 sqm
Add for over lapping @ 10% = 3 sqm.
0322
Total = 33 Sqm.
sqm
33.00
50.00
1177
Stone grit 6mm and down size or pea sized gravel. 30x6=180 cum
0.18
900.00
cudm.

DSR-12

Page 1069 of 2298

2202
2211

2200
9999

Carriage of stone grit

Carriage of bitumen and felt. = 0.162t
0.087tx2.7x.001x33=0.162t
Fuel (Steam coal) = 2 quintals/t of bitumen i.e.
2x0.087=0.174q
Carriage of fuel
Praparing roof surface, sutting groove and making good etc.

0131
0114
0130
9999

LABOUR:
Painter
Beldar
Mistries
Sundries, brushes etc.

0370

cum
tonne

0.18
0.162

87.60
87.60

quint

0.174

400.00

tonne
L.S.

0.0174
134.55

100.11
1.49

2.16
3.24
0.18
6.76

273.00
247.00
301.00
1.49
Total:
6786.99

Day
Day
Day
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

6854.86
Cost for 30.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 262.77
Rs 262.75

Item Code: 22.9

P/L Six courses water proof- ing treatment with bitumen felt ( hession base ) type 3 grade I .
Details of Cost for : 30.00 Sqm
Code
Description
Unit
Quantity
Rate
0313
Blown or / and residual bitumen applied hot
tonne
0.123
37000.00
(1.45+1.20+1.45)x30
123 Kg.
0322
Bitumen felt type 3 grade I
sqm
66.00
50.00
(hession base self finished bitumen felt) = 60 sqm.+
Add for over lapping @ 10% = 6 sqm.
=66 Sqm.
2211
Carriage of bitumen and felt. =0.273t.
tonne
0.273
87.60
0.123tx2.7x.001x66=0.273t
1177
Stone grit 6mm and sown size or pea sized gravel cum
0.18
900.00
30x6=180cudm.
2202
Carriage of stone grit
cum
0.18
87.60
0370
Fuel (Steam coal) = 2 quintals/t of bitumen i.e.
quint
0.246
400.00
2x0.123=0.246q
2200
Carriage of fuel
tonne
0.0246
100.11
9999
Praparing roof surface, sutting groove and making good etc. L.S.
134.55
1.49

0131
0114
0130
9999

LABOUR:
Painter
Beldar
Mistries
Sundries, brushes etc.

Day
Day
Day
L.S.

3.24
4.86
0.20
6.76

Add water charges @ 1% on

273.00
247.00
301.00
1.49
Total:
10509.23

Add C.P & OH @15% on

10614.32
Cost for 30.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 406.88
Rs 406.90

Item Code: 22.10

DSR-12

Page 1070 of 2298

P/L six courses water proofing treatment with bitumen felt (fibre base self finished bitumen felt).
Details of Cost for : 30.00 Sqm
Code
Description
Unit
Quantity
Rate
0313
Blown bitumen applied hot
tonne
0.1305
37000.00
(1.45+1.20+1.70)x30
130.5 Kg.
0318
Bitumen felt type B grade I
sqm
66.00
55.00
(fibre base self finished bitumen felt) = 60 sqm.
Add for over lapping @ 10% = 6 sqm.
Total =66 Sqm.
2211
Carriage of bitumen and felt.
tonne
0.275
87.60
0.131 tx2.22x.001x66 = 0.248t
1177
Stone grit 6mm and sown size or pea sized ravel. cum
0.18
900.00
30x6=180cudm.
2202
Carriage of stone grit
cum
0.18
87.60
0370
Fuel (Steam coal) = 2 quintals/t of bitumen i.e.
quint
0.261
400.00
2x0.1305=0.261q
2200
Carriage of fuel
tonne
0.0261
100.11
9999
Preparing roof surface, sutting groove and making good etc. L.S.
134.55
1.49

0131
0114
0130
9999

LABOUR:
Painter
Beldar
Mistries
Sundries, brushes etc.

Day
Day
Day
L.S.

4.32
6.48
0.36
6.76

Add water charges @ 1% on

273.00
247.00
301.00
1.49
Total:
11866.20

Add C.P & OH @15% on

11984.86
Cost for 30.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 459.42
Rs 459.40

Item Code: 22.11

P/L six cours water proofing treatment with bitumen felt (glass fibre base self fini- shed bitumen felt).
Details of Cost for : 30.00 Sqm
Code
Description
Unit
Quantity
Rate
0313
Blown or / and residual bitumen applied hot
tonne
0.1305
37000.00
(1.45+1.20+1.70)x30 =130.5 Kg.
0318
Bitumen felt type 2 grade II
sqm
66.00
55.00
(fibre base self finished bitumen felt) = 60 sqm.+
Add for over lapping @ 10% = 6 sqm.
=66 Sqm.
2211
Carriage of bitumen and felt.
tonne
0.334
87.60
0.131tx3.08x.001x66=334kg.
1177
Stone grit 6mm and down size or pea sized ravel. cum
0.18
900.00
30x6=180cudm.
2202
Carriage of stone grit
cum
0.18
87.60
0370
Fuel (Steam coal) = 2 quintals/t of bitumen i.e.
quint
0.261
400.00
2x0.1305=0.261q (As per CS1)
2200
Carriage of fuel
tonne
0.0261
100.11
9999
Preparing roof surface, sutting groove and making good etc. L.S.
134.55
1.49

0131
0114
0130
9999

DSR-12

LABOUR:
Painter
Beldar
Mistries
Sundries, brushes etc.

Day
Day
Day
L.S.

4.32
6.48
0.36
6.76

273.00
247.00
301.00
1.49

Page 1071 of 2298

Add water charges @ 1% on

Total:
11871.37

Add C.P & OH @15% on

11990.08
Cost for 30.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 459.62
Rs 459.60

Item Code: 22.12

Supplying and applying bitum- enous solution primer on roof
Code
0316
9999
0131
0114
9999

Description
MATERIALS
Bitumenous solution primer
Carriage
LABOUR:
Painter
Beldar
Sundries brushes etc

Details of Cost for : 10.00 Sqm

Unit
Quantity

Rate

litre
L.S.

2.40
1.43

40.00
1.49

Day
Day
L.S.

0.17
0.17
13.52

273.00
247.00
1.49
Total:
206.67

Add water charges @ 1% on

Add C.P & OH @15% on

208.74
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 24.01
Rs 24.00

Item Code: 22.13.1

Deduct for omitting stone grit 6 mm down size or pea sized gravel:- at 6 cubic dm per sqm.
Details of Cost for : -10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS:
1177
Stone grit 6mm or down size 6x10 = 60 cudm.
cum
0.06
2202
Carriage of stone grit
cum
0.06
9999
Labour for screening and spreading grit
L.S.
21.58
9999
Sundries
L.S.
6.76
Add water charges @ 1% on

Rate
900.00
87.60
1.49
1.49
Total:
101.48

Add C.P & OH @15% on

102.49
Cost for -10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

-Rs 11.79
-Rs 11.80

Item Code: 22.13.2

Deduct for omitting stone grit 6 mm down size or pea sized gravel:- at 8 cubic dm per sqm.
Details of Cost for : -10.00 Sqm
Code
Description
Unit
Quantity
MATERIALS:
1177
Stone grit 6mm or down size 6x10 = 60 cudm.
cum
0.08
2202
Carriage of stone grit
cum
0.08
9999
Labour for screening and spreading grit
L.S.
26.91
9999
Sundries
L.S.
6.76

DSR-12

Rate
900.00
87.60
1.49
1.49
Total:

Page 1072 of 2298

Add water charges @ 1% on

129.18

Add C.P & OH @15% on

130.47
Cost for -10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

-Rs 15.00
-Rs 15.00

Item Code: 22.14.1

Grading roof for water proof- ing treatment with :- C.C 1 : 2 : 4 .
Code
0295
0297
2202
0982
2203
0367
2209
0114
0101
0123
9999
0002
0012
9999

Details of Cost for : 1.00 Cum

Unit
Quantity
cum
0.67
cum
0.22
cum
0.89
cum
0.45
cum
0.45
tonne
0.32
tonne
0.32

Description
Stone aggregate 20mm nominal size
Stone aggregate 10mm nominal size
Carriage of stone aggregate
Coarse sand
Carriage of coarse sand
Cement
Carriage of cement
LABOUR:Beldar
Bhishti
Mason 1st Class
Sundries, brushes etc.
Mixer
Vibrator
Sundries for laying in terrace

Day
Day
Day
L.S.
Day
Day
L.S.

1.63
0.70
0.10
14.30
0.07
0.07
45.76

Add water charges @ 1% on

Rate
1050.00
1050.00
87.60
1120.00
87.60
5000.00
77.87
247.00
260.00
301.00
1.49
800.00
300.00
1.49
Total:
3962.00

Add C.P & OH @15% on

4001.62
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 4601.86
Rs 4601.85

Item Code: 22.14.2

Grading roof for water proof- ing treatment with :- C.M 1 : 3 coarse sand.
Code
03.008
0155
0114
0101
0115
9999

Description
MATERIALS:
Cement mortar 1:3 (1 cement : 3 coarse sand)
LABOUR
Mason
Beldar
Bhishti
Coolie
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity

Day
Day
Day
Day
L.S.

Rate

1.00

4145.53

1.00
2.00
0.50
5.00
11.70

287.00
247.00
260.00
247.00
1.49
Total:
6308.96

Add water charges @ 1% on

Add C.P & OH @15% on

6372.05
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

DSR-12

Rs 7327.86
Rs 7327.90

Page 1073 of 2298

Item Code: 22.14.3

Grading roof for water proof- ing treatment with :- C.M 1 : 4 coarse sand.
Code
03.009
0155
0114
0101
0115
9999

Details of Cost for : 1.00 Cum

Unit
Quantity

Description
MATERIALS:
Cement mortar 1:4 (1 cement : 4 coarse sand).
LABOUR
Mason
Beldar
Bhishti
Coolie
Sundries

Day
Day
Day
Day
L.S.

Rate

1.00

3485.41

1.00
2.00
0.50
5.00
10.79

287.00
247.00
260.00
247.00
1.49
Total:
5647.49

Add water charges @ 1% on

Add C.P & OH @15% on

5703.96
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 6559.55
Rs 6559.55

Item Code: 22.15

P/L in situ seven courses water proofing treatment with APP (Atactic PolyProp- lene) modified memberane manufactured by Bengal
Bitu- men, integrated Watre proo- fing Ltd. or General membe- ranes with 1.5 mm.

Code

8200
0316
0313
2211
9999
0370
2200
9999

0131
0114
0130
9999

Details of Cost for : 30.00 Sqm

Unit
Quantity

Description
MATERIAL
APP modified polymeric felt (two layers) 1.5 mm thick = 2x30
= 60 sqm
Add 10% wastage = 6 sqm
Total = 66 sqm
Bitumen primer 0.4x30 = 12
Bitumen (Blown/ residual type) 3x36 =108 kg
= 0.108 tonne
Carriage of bitumen primer
Carriage of polymeric felt
Fuel (steam coal)
Carriage of fuel
Preparing roof surface, cutting grooves and making good the
same
LABOUR
Painter
Beldar
Mistry
Sundries, brushes etc

Rate

sqm
litre
tonne

66.00
12.00
0.108

59.00
40.00
37000.00

tonne
L.S.
quint
tonne
L.S.

0.12
7.80
0.174
0.0174
134.55

87.60
1.49
400.00
100.11
1.49

2.16
3.24
0.18
6.76

273.00
247.00
301.00
1.49
Total:
10118.16

Day
Day
Day
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

10219.34
Cost for 30.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 391.74
Rs 391.75

Item Code: 22.16

DSR-12

Page 1074 of 2298

P/L in situ five courses water proofing treatment with APP (Atactic Poly- Proplene) modified polyme- ric memberane manufactured
by Bengal Bitumen, integra- ted Watre proofing Ltd. or General memberanes with 2.0 mm thick.

Code

8201
0316
0313
2211
9999
0370
2200
9999

0131
0114
0130
9999

Details of Cost for : 30.00 Sqm

Unit
Quantity

Description
MATERIAL
APP modified polymeric felt (two layers) 2.0 mm thick =30
sqm
Total = 33 sqm
Bitumen primer 0.4x30 = 12
Bitumen (Blown/ residual type) 1.20x30x2
=72 kg = 0.072 tonne
Carriage of bitumen primer
Carriage of polymeric felt
Fuel (steam coal)
Carriage of fuel
Preparing roof surface, cutting grooves and making good the
same
LABOUR
Painter
Beldar
Mistry
Sundries, brushes etc

Rate

sqm
litre
tonne

33.00
12.00
0.072

99.00
40.00
37000.00

tonne
L.S.
quint
tonne
L.S.

0.084
7.80
0.174
0.0174
134.55

87.60
1.49
400.00
100.11
1.49

1.58
2.37
0.13
6.76

273.00
247.00
301.00
1.49
Total:
7767.73

Day
Day
Day
L.S.

Add water charges @ 1% on

Add C.P & OH @15% on

7845.41
Cost for 30.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 300.74
Rs 300.75

Item Code: 22.18.1

P/L APP (Atactic PolyProplene polymer)modified prefbricated five layer 2 mm thick water proofing memberane,with glass fibre
matt manufactured Bitumen Co. Ltd., Sopreme or Tamko consisting: joints strength trasverse 350/300 tear strength 60/80N. 2 mm
thic

Code

8203
8206
2211
9999
1241
9999
0159
0130
0114
9999

DSR-12

Description

Details of Cost for : 30.00 Sqm

Unit
Quantity

MATERIALS :
A.P.P. modified 2 mm thick 30 sqm
Add 10% for waistage = 3 sqm
Total = 33 sqm
A.P.P. modified 2 mm thick membrane reinforced with glass sqm
fibre matt
Bitumen primer for bitumen membrane
litre
Carriage of Tar bitumen
tonne
Carriage of bitumen membrane
L.S.
Fuel LPG
kg
Preparing roof surface, cutting grooves
L.S.
LABOUR:
Skilled torch operator for laying tack
Day
Mistry
Day
Beldar
Day
Sundries, brushes, bitumen torch etc
L.S.

Rate

33.00

167.00

12.00
0.012
7.80
7.00
49.53

71.00
87.60
1.49
51.00
1.49

2.16
0.18
3.24
23.40

Add water charges @ 1% on

301.00
301.00
247.00
1.49
Total:
8345.96

Add C.P & OH @15% on

8429.42

Page 1075 of 2298

Cost for 30.00 Sqm

Rate per One Sqm:
Rate as per DSR-12:

Rs 323.13
Rs 323.15

Item Code: 22.19.1

P/L APP (Atactic PolyProplene polymer) five layer 3 mm thick water proofing memberane,with glass fibre matt manufactured
Bitumen Co. Ltd., Sopreme or Tamko consisting: joints strength trasverse 350/300 tear strength 60/80N. 3 mm thick.

Code

8204
8206
2211
9999
1241
9999
0159
0130
0114
9999

Details of Cost for : 30.00 Sqm

Unit
Quantity

Description
MATERIALS :
A.P.P. modified 3mm thick =-30 sqm
Add 10% for wastage 3 sqm. Total 33 sqm
A.P.P. modified 3 mm thick membrance reinforced with glass
fibre matt
Bitumen primer for bitumen membrance
Carriage of Tar bitumen
Carriage of bitumen membrance
Fuel LPG
Preparing roof surface, cutting grooves
LABOUR:
Skilled torch operator for laying tack
Mistry
Beldar
Sundries, brushes, bitumen torch etc

Rate

sqm

33.00

207.00

litre
tonne
L.S.
kg
L.S.

12.00
0.012
7.80
7.00
49.53

71.00
87.60
1.49
51.00
1.49

Day
Day
Day
L.S.

2.16
0.18
3.24
23.40

301.00
301.00
247.00
1.49
Total:
9665.96

Add water charges @ 1% on

Add C.P & OH @15% on

9762.62
Cost for 30.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 374.23
Rs 374.25

Item Code: 22.20.1

P/L APP (Atactic PolyProplene polymer)modified prefbricated five layer 3 mm thick water proofing memberane,with glass fibre
matt manufactured Bitumen Co. Ltd., Sopreme or Tamko consisting: 3 mm thick.

Code

8205
8206
2211
9999
1241
9999
0159
0130
0114
9999

DSR-12

Description

Details of Cost for : 30.00 Sqm

Unit
Quantity

MATERIALS :
A.P.P. modified 3mm thick - 30 sqm
Add 10% for wastage = 3 sqm.
Total = 33 sqm
A.P.P. modified 3 mm thick membrance reinforced with sqm
polyster matt
Bitumen primer for bitumen membrane
litre
Carriage of Tar bitumen
tonne
Carriage of bitumen membrane
L.S.
Fuel LPG
kg
Preparing roof surface, cutting grooves
L.S.
LABOUR:
Skilled torch operator for laying tack
Day
Mistry
Day
Beldar
Day
Sundries, brushes, bitumen torch etc
L.S.

Rate

33.00

245.00

12.00
0.012
7.80
7.00
49.53

71.00
87.60
1.49
51.00
1.49

2.16
0.18
3.24
23.40

301.00
301.00
247.00
1.49
Total:

Page 1076 of 2298

Add water charges @ 1% on

10919.96

Add C.P & OH @15% on

11029.16
Cost for 30.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 422.78
Rs 422.80

Item Code: 22.21

Extra for covering top of memberene with Geotexile, 120 grams non wovwn, 100 % polyster of thickness 1.0 to 1.25 mm by Bhutan
Troch as manufactures recommented (for item No.22.18to22.20).

Code

8207
9999
0159
0130
0114
9999

Description
MATERIALS :
Geotextile 120 gsm membrane =30 sqm
Add 5% for wastage = 1.5 sqm. Total 31.50sqm
Geotextile 120 gsm membrance
Carriage of Geotextile
LABOUR:
Skilled torch operator for laying tack
Mistry 0.18-5 = 0.04
Beldar 3.24-5 = 0.65
Sundries, torch, LPG etc

Details of Cost for : 30.00 Sqm

Unit
Quantity

Rate

sqm
L.S.

31.50
7.80

32.00
1.49

Day
Day
Day
L.S.

0.43
0.04
0.65
46.80

301.00
301.00
247.00
1.49
Total:
1391.37

Add water charges @ 1% on

Add C.P & OH @15% on

1405.28
Cost for 30.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 53.87
Rs 53.85

Item Code: 23.1

Trenching in ordinary soil upto a depth of 60 Cm.
Code
0114
9999
0115

Description
LABOUR
Beldar
Sundries
collies

Details of Cost for : 10.00 Cum

Unit
Quantity
Day
L.S.
Day

0.71
2.73
0.35

Add water charges @ 1% on

Rate
247.00
1.49
247.00
Total:
265.89

Add C.P & OH @15% on

268.55
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 30.88
Rs 30.90

Item Code: 23.2

Supplying and stacks good earth at site i/c carriage.
Code

0114

DSR-12

Description
Details of cost for 1 cum.
Excavation:
Beldar

Details of Cost for : 1.00 Cum

Unit
Quantity

Day

0.177

Rate

247.00

Page 1077 of 2298

0115
0979
2241

Coolie
Royalty for good earth
Carriage of good earth by mechanical

Day
cum
cum

0.167
1.00
1.00

Add water charges @ 1% on

247.00
30.00
109.50
Total:
224.47

Add C.P & OH @15% on

226.71
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 260.72
Rs 260.70

Item Code: 23.3

Supplying and stacks sludge at site i/c carriage.
Code
2317

Description
Carriage of sludge by mechanical transport upto 1 km lead

Details of Cost for : 1.00 Cum

Unit
Quantity
cum
1.00

0980

Royalty of sludge

cum

1.00

Add water charges @ 1% on

Rate
95.22
90.00
Total:
185.22

Add C.P & OH @15% on

187.07
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 215.13
Rs 215.15

Item Code: 23.4.1

Supplying and stacks at site dump manure i/c carriage. Screened sieve I.S. 20 mm.
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
2242
Carriage of dump manure (by mechanical transport)
cum
1.00
Labour for screening:
0114
Beldar
Day
0.08
9999
Sundries
L.S.
2.73
Add water charges @ 1% on

Rate
95.22
247.00
1.49
Total:
119.05

Add C.P & OH @15% on

120.24
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 138.28
Rs 138.30

Item Code: 23.4.2

Supplying and stacks at site dump manure i/c carriage. Screened sieve I.S. 16 mm.
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
2242
Carriage of dump manure (by mechanical transport)
cum
1.00
Labour for screening :
0114
Beldar
Day
0.13
9999
Sundries
L.S.
2.73

DSR-12

Rate
95.22

Add water charges @ 1% on

247.00
1.49
Total:
131.40

Add C.P & OH @15% on

132.71

Page 1078 of 2298

Cost for 1.00 Cum

Rate per One Cum:
Rate as per DSR-12:

Rs 152.62
Rs 152.60

Item Code: 23.4.3

Supplying and stacks at site dump manure i/c carriage. Screened sieve I.S. 4.75 mm.
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
2242
Carriage of dump manure (by mechanical transport)
cum
1.00
Labour for screening :
0114
Beldar
Day
0.17
9999
Sundries
L.S.
2.73
Add water charges @ 1% on

Rate
95.22
247.00
1.49
Total:
141.28

Add C.P & OH @15% on

142.69
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 164.09
Rs 164.10

Item Code: 23.5

Code
0114
9999

Description
LABOUR:
Beldar
Sutndries

Details of Cost for : 100.00 Sqm

Unit
Quantity
Day
L.S.

0.20
1.43

Add water charges @ 1% on

Rate
247.00
1.49
Total:
51.53

Add C.P & OH @15% on

52.05
Cost for 100.00 Sqm
Rate per 100 Sqm:
Rate as per DSR-12:

Rs 59.86
Rs 59.85

Item Code: 23.6

Uprooting weeds from trenched area, disposal of uprooted.
Code
0114
0115
9999

Description
LABOUR:
Beldar
Coolie
Sundries

Details of Cost for : 100.00 Sqm

Unit
Quantity
Day
Day
L.S.

0.33
0.33
2.73

Add water charges @ 1% on

Rate
247.00
247.00
1.49
Total:
167.09

Add C.P & OH @15% on

168.76
Cost for 100.00 Sqm
Rate per 100 Sqm:
Rate as per DSR-12:

Rs 194.07
Rs 194.05

Item Code: 23.7

Details of Cost for : 100.00 Sqm

DSR-12

Page 1079 of 2298

Code
0114
9999

Description
LABOUR:
Beldar
Sundries

Unit

Quantity

Rate

Day
L.S.

0.50
1.43

247.00
1.49
Total:
125.63

Add water charges @ 1% on

Add C.P & OH @15% on

126.89
Cost for 100.00 Sqm
Rate per 100 Sqm:
Rate as per DSR-12:

Rs 145.92
Rs 145.90

Item Code: 23.8

Spreading sludge, dump manure and good earth.
Code

0114
9999

Description
Details of cost for 100sqm.
Labour:
Beldar
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity

Day
L.S.

0.07
0.52

Add water charges @ 1% on

Rate

247.00
1.49
Total:
18.06

Add C.P & OH @15% on

18.24
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 20.98
Rs 21.00

Item Code: 23.9

Mixing earth and sludge or manure in proportion.
Code
0114
0115

Description
LABOUR:
Beldar
Coolie

Details of Cost for : 10.00 Cum

Unit
Quantity
Day
Day

0.25
0.25

Add water charges @ 1% on

Rate
247.00
247.00
Total:
123.50

Add C.P & OH @15% on

124.74
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 14.35
Rs 14.35

Item Code: 23.10.1

Grassing of `Doob' grass i/c watering and maintenance of lawn for 30 days or more: In rowa 15 cm apart.
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
LABOUR:
0114
Beldar
Day
0.80
0115
Coolie
Day
1.60
9999
Sundries
L.S.
6.76
Add water charges @ 1% on

DSR-12

Rate
247.00
247.00
1.49
Total:
602.87

Page 1080 of 2298

Add C.P & OH @15% on

608.90
Cost for 100.00 Sqm
Rate per 100 Sqm:
Rate as per DSR-12:

Rs 700.24
Rs 700.25

Item Code: 23.10.2

Grassing of `Doob' grass i/c watering and maintenance of lawn for 30 days or more: In rows 7.5 cm apart.
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Details of cost for 100sqm.
Labour:
0114
Beldar
Day
0.80
0115
Coolie
Day
1.00
9999
Sundries
L.S.
6.76
Add water charges @ 1% on

Rate

247.00
247.00
1.49
Total:
454.67

Add C.P & OH @15% on

459.22
Cost for 100.00 Sqm
Rate per 100 Sqm:
Rate as per DSR-12:

Rs 528.10
Rs 528.10

Item Code: 23.11

Renovating lawns i/c weeding, cheeling the grass, forking the ground, top dressing with sludge or manure.
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Details of cost for 100sqm.
Labour:
0114
Beldar
Day
2.70
0115
Coolie
Day
2.00
9999
Sundries
L.S.
2.73
Add water charges @ 1% on

Rate

247.00
247.00
1.49
Total:
1164.97

Add C.P & OH @15% on

1176.62
Cost for 100.00 Sqm
Rate per 100 Sqm:
Rate as per DSR-12:

Rs 1353.11
Rs 1353.10

Item Code: 23.12

Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by
forking.
Details of Cost for : 100.00 Sqm
Code
Description
Unit
Quantity
Rate
1. Labour for trenching to a depth of 30cm0114
Beldar
Day
1.50
247.00
0115
Coolie
Day
0.75
247.00
2. Labour for forking to remove weeds and rank vegetation0114
0115

0114

DSR-12

Beldar
Coolie
3. Labour for trenching to a further depth of
30cmBeldar

Day
Day

1.00
0.50

247.00
247.00

Day

2.13

247.00

Page 1081 of 2298

0115

0114
0115
9999
0114
9999
0114
9999
9999

Coolie
Day
4. Removal of weeds from the trenched area with 10 to 15
days of its flooding with water as per item No. 23.6
Beldar
Day
Coolie
Day
Sundries
L.S.
5. Rough dressing as per item No. 23.5
Beldar
Day
Sundries
L.S.
6. Fine dressing as per item No. 23.7
Beldar
Day
Sundries
L.S.
Sundries
L.S.

1.06

247.00

0.33
0.33
2.73

247.00
247.00
1.49

0.20
1.43

247.00
1.49

0.50
1.43
6.76

247.00
1.49
1.49
Total:
2068.50

Add water charges @ 1% on

Add C.P & OH @15% on

2089.19
Cost for 100.00 Sqm
Rate per 100 Sqm:
Rate as per DSR-12:

Rs 2402.57
Rs 2402.55

Item Code: 23.13

Preparation of beds for hedg- ing and shrubbery by excavat- ing 60 Cm deep and trenching refilling the excavated earth after
breaking clods & mixing with sludge or manure in the ratio of 8 : 1.

Code
0114
0115

Details of Cost for : 10.00 Cum

Unit
Quantity

Description
LABOUR:
Beldar
Coolie

Day
Day

1.80
1.25

Add water charges @ 1% on

Rate
247.00
247.00
Total:
753.35

Add C.P & OH @15% on

760.88
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 87.50
Rs 87.50

Item Code: 23.14.1

Digging holes in ordinary soil and refilling the same with 2 : 1 (2 earth : 1 manure): Holes 1.2 m & 1.2 m deep.

Code

02.008.01

Description
Details of cost for one holeExtra Excavation22/7x(1.2)^2 /4x1.2 = 1.36 cum.
E/W excavation in foundation trenches .. .. All kinds of soil.

9999

Refilling mixture and flooding

Details of Cost for : 1.00 No.

Unit
Quantity

L.S.

Rate

1.36

130.78

5.20

1.49
Total:
7.75

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

7.83
Cost for 1.00 No.
Rate per Each:

DSR-12

Rs 186.86

Page 1082 of 2298

Rate as per DSR-12:

Rs 186.90

Item Code: 23.14.2

Digging holes in ordinary soil and refilling the same with 2 : 1 (2 earth : 1 manure): Holes 90 cm dia & 90 cm deep.

Code

02.008.01

Description
Details of cost for one holeExtra Excavation22x(0.6)^2 /4x0.90=0.57cum
E/W excavation in foundation trenches .. .. All kinds of soil.

9999

Refilling mixture and flooding

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

Cum

0.57

130.78

L.S.

3.25

1.49
Total:
4.84

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

4.89
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 80.16
Rs 80.20

Item Code: 23.14.3

Digging holes in ordinary soil and refilling the same with 2 : 1 (2 earth : 1 manure): Holes 60 cm dia & 60 cm deep.

Code

02.008.01

Description
Details of cost for one holeExtra Excavation22x(0.6)^2 /4x0.60=0.17cum
E/W excavation in foundation trenches .. .. All kinds of soil.

9999

Refilling mixture and flooding

Details of Cost for : 1.00 No.

Unit
Quantity

L.S.

Rate

0.17

130.78

1.43

1.49
Total:
2.13

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

2.15
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 24.70
Rs 24.70

Item Code: 23.14.4

Digging holes in ordinary soil and refilling the same with 2 : 1 (2 earth : 1 manure): Holes 45 cm dia & 45 cm deep.

Code

DSR-12

02.008.01

Description
Details of cost for one holeExtra Excavation22x(0.6)^2 /4x0.45=0.07cum
E/W excavation in foundation trenches .. .. All kinds of soil.

9999

Refilling mixture and flooding

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

Cum

0.07

130.78

L.S.

0.88

Add water charges @ 1% except on [A] i.e on

1.49
Total:
1.31

Add C.P & OH @15% except on [A] i.e on

1.32

Page 1083 of 2298

Cost for 1.00 No.

Rate per Each:
Rate as per DSR-12:

Rs 10.67
Rs 10.70

Item Code: 23.15.1

Half brick circular tree guard in 50 class designation bricks, internal dia. 1.25 m and height 1.2 m above GL. With F.P.S. bricks.

Code

2603
2201
9999
0124
0114
9999

Description
Details of cost for one tree guard
MATERIALS:
Brick 3rd class
Carriage of bricks
Lime or cement mortar top 3 courses
LABOUR:
Mason 2nd class
Beldar
Sundries

Details of Cost for : 1.00 No.

Unit
Quantity

1000
1000
L.S.
Day
Day
L.S.

Rate

230.00
230.00
15.86

2450.00
233.60
1.49

0.25
0.25
4.16

273.00
247.00
1.49
Total:
777.06

Add water charges @ 1% on

Add C.P & OH @15% on

784.83
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 902.55
Rs 902.55

Item Code: 23.16

P/F M.S. flat iron tree guard 60 Cm dia. and 2 Mtr height above ground level formed of M.S. flats rivetted to flat iron rings.

Code

1008
9999
9999
2205
0103
0114

DSR-12

Description
Details of cost for one tree guardMATERIALS :
M.S. Flats:- 25x6mm
vertical 4x2.25= 9.00m
25x6mm rings
3x(22/7x0.6)+0.16 = 6.14m
Total = 15.14m
wt. @ 1.2kg per m = 18.17kg.
25x3.00mm verticals 8x2= 16m
16.00x0.25=0.40 sqm.
wt. @24.73kg/sqm. = 9.89kg.
Total M.S. Flats = 28.06kg +
wastage @5% = 1.40kg
Total = 29.46kg.
Say 0.29 quintal
Rivets 36 nos.
G.I. Bolts and nuts
Crriage of material
LABOUR:
Blacksmith 2nd class
Beldar
Painting4x2x0.03x2.0 = 0.496+
8x2x0.028x2.00 = 0.896+
2x6.14x0.031 =0.381

Details of Cost for : 1.00 No.

Unit
Quantity

quint
L.S.
L.S.
tonne
Day
Day

Rate

0.29
40.30
8.06
0.029

4200.00
1.49
1.49
77.87

2.00
1.00

273.00
247.00

Page 1084 of 2298

13.050.04
13.061.01

Total = 1.773
Say 1.77 sqm.
Applying priming coat : With ready mixed red oxide zinc
chromate primer on steel work (sec
Painting with synthetic enamel paint : Two or more coats on
new work

1.77

11.40

1.77

53.87

Add water charges @ 1% except on [A]+[B] i.e on

Total:
2085.32

Add C.P & OH @15% except on [A]+[B] i.e on

2106.17
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2537.63
Rs 2537.60

Item Code: 23.17.1

Making tree guard 53 cm dia. and 1.3 m high as per design from empty coal tar drums supplied free by the Deptt : A coat of coal tar.

Code
9999
9999
9999
0103
0114
9999

13.059

Description
Details of cost for one tree guard.
Cost of 2 putties
Cost of 6mm dia xl0 mm rivets 22 nos
Fire wood
LABOUR:
Blacksmith 2nd class
Beldar
Sundries
Coal tarring alround inside and outside
1/2 x 2 x 22/7 x 0.53 x 1.30 = 2.16.
Coal tarring two coats on new work

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

L.S.
L.S.
L.S.

13.39
26.91
2.73

1.49
1.49
1.49

Day
Day
L.S.

0.13
0.07
1.43

273.00
247.00
1.49

2.16

24.55
Total:
119.03

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

120.22
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 191.28
Rs 191.30

Item Code: 23.17.2

Making tree guard 53 cm dia. and 1.3 m high as per design from empty coal tar drums supplied free by the Deptt : Two or more
coats of ready mixed paint.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one tree guard.
Cost of one free guard
23.017.01 Making tree guard 53 cm dia. and 1.3 m high as per design
1.00
191.28
from empty coal tar drums suppli
Priming coat
13.050.03 Applying priming coat : With ready mixed red oxide zinc
2.16
20.72
chromate primer on steel galvanise
Painting with synthetic enamel paint
13.061.01 Painting with synthetic enamel paint : Two or more coats on
2.16
53.87
new work
13.059
Coal tarring two coats on new work
-2.16
24.55
Total:
Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on
0.00

DSR-12

Page 1085 of 2298

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

0.00
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 299.37
Rs 299.30

Item Code: 23.18.1

Making tree guard 53 Cm dia. and 2 Mtr high as per design from empty coal tar drums supplied free by the Deptt : A coat of coal
tar.
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one tree guard9999
Cost of two M.S. sheet rings 50x0.5mm
L.S.
13.52
1.49
9999
Cost of 6mm dia. rivets 10mm long 50 Nos.
L.S.
67.21
1.49
9999
Fire wood
L.S.
2.73
1.49
LABOUR :
0103
Blacksmith 2nd class
Day
0.19
273.00
0114
Beldar
Day
0.10
247.00
9999
Sundries
L.S.
1.43
1.49
4 legs of M.S. flat 30x3mm including riveting and other end
sharpened for easing fixing the tree guard in the ground 4 legs
0.4 each = 1.6m.
1.6x0.032=0.501sqm. @ 24.73kg/sqm. =1.26 kg = 0.013q
1008
Cost of M.S.flat
quint
0.013
4200.00
Carriage of M.S. flats (negligible)
Coal tarring alround inside and outside.
1/2x2x22/7x0.53x2.0 = 3.33sqm.
13.059
Coal tarring two coats on new work
3.33
24.55
Total:
Add water charges @ 1% except on [A] i.e on
257.65
Add C.P & OH @15% except on [A] i.e on
260.23
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 381.01
Rs 381.00

Item Code: 23.18.2

Making tree guard 53 Cm dia. and 2 Mtr high as per design from empty coal tar drums supplied free by the Deptt :

Code
23.018.01

13.050.03

13.061.01

13.059

Details of Cost for : 1.00 No.

Description
Unit
Quantity
Details of cost for one tree guardMaking tree guard 53 Cm dia. and 2 Mtr high as per design
1.00
from empty coal tar drums suppli
Applying priming coat
1/2 x 2 x 22/7 x 0.53 x 2 = 3.33 sqm
Applying priming coat : With ready mixed red oxide zinc
3.33
chromate primer on steel galvanise
Painting with synthetic enamel paint
Painting with synthetic enamel paint : Two or more coats on
3.33
new work
Less cost of coal tarring
Coal tarring two coats on new work
-3.33
Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

DSR-12

Rate
381.01

20.72

53.87

24.55
Total:
0.00

Page 1086 of 2298

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

0.00
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 547.65
Rs 547.50

Item Code: 23.19.1

Edging with bricks laid dry length wise - Common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Code
2602
2201
0124
0115
9999

Details of Cost for : 10.00 m

Unit
Quantity

Description
MATERIALS:
Common burnt clay F.P.S. (non modular) bricks class
designation7.5
Carraige of Bricks
LABOUR:
Mason (brick layer) 2nd class
Coolie
Earth work in excavation and removal of rubbish (or
spreading and dressing neatly of surpl

Rate

1000

50.00

2900.00

1000

50.00

233.60

Day
Day
L.S.

0.05
0.05
13.52

273.00
247.00
1.49

Add water charges @ 1% on

Total:
202.82

Add C.P & OH @15% on

204.85
Cost for 10.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 23.56
Rs 23.55

Item Code: 23.20

Filling mixture of earth and sludge or manure.
Code
0114
0115

Description
LABOUR:
Beldar
Coolie

Details of Cost for : 10.00 Cum

Unit
Quantity
Day
Day

0.17
0.08

Add water charges @ 1% on

Rate
247.00
247.00
Total:
61.75

Add C.P & OH @15% on

62.37
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 7.17
Rs 7.15

Item Code: 23.21

Code
0114
0115

Description
LABOUR:
Beldar
Coolie

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day

0.35
0.35

Add water charges @ 1% on

Rate
247.00
247.00
Total:
172.90

Add C.P & OH @15% on

174.63
Cost for 1.00 Cum

DSR-12

Page 1087 of 2298

Rate per One Cum:

Rate as per DSR-12:

Rs 200.82
Rs 200.80

Item Code: 23.22

Code
0114
0115

Description
LABOUR:
Beldar
Coolie

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day

0.43
0.35

Add water charges @ 1% on

Rate
247.00
247.00
Total:
192.66

Add C.P & OH @15% on

194.59
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 223.78
Rs 223.80

Item Code: 23.23

Excavation in water bound macadam road.
Code
0114
0115

Description
LABOUR:
Beldar
Coolie

Details of Cost for : 1.00 Cum

Unit
Quantity
Day
Day

0.53
0.43

Add water charges @ 1% on

Rate
247.00
247.00
Total:
237.12

Add C.P & OH @15% on

239.49
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 275.41
Rs 275.40

Item Code: 23.24

Code
0114
9999

Description
Beldar
Sundries

Details of Cost for : 100.00 Sqm

Unit
Quantity
Day
0.17
L.S.
35.88
Add water charges @ 1% on

Rate
247.00
1.49
Total:
95.45

Add C.P & OH @15% on

96.40
Cost for 100.00 Sqm
Rate per 100 Sqm:
Rate as per DSR-12:

Rs 110.86
Rs 110.85

Item Code: 23.25

Supplying and stacking of well decayed cow dung manure at site including royalty and carriage upto 1 km (Cow dung manure
measured in stacks will reduced by 8% for Payment)
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
Rate
0303
Cow Dung
Cum
1.00
47.00
2242
Carraige of Dump manure
cum
1.00
95.22
Total:

DSR-12

Page 1088 of 2298

Add water charges @ 1% on

142.22

Add C.P & OH @15% on

143.64
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 165.19
Rs 128.95

Item Code: 23.26

Providing and fixing M. S. tree guard 45 cm square in plan, height 1.20 metre above ground level and 0.40 metre below ground
level..
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one tree guard
(Ref. Fig. 1 of Tree Guard)
(a)MS Angle iron 25x25x3 mm
Verticle 4x1.60 mtrs= 6.40 mtrs
6.40 mtrs. @ 1.10 kg. / per mtr.=7.04 kg.
(b)MS Flat 25x3 mm
Verticle 2x4x1.20 mtrs.= 9.60 mtrs
9,60 @ 0.60kg / per mtr.=5.76 kg.
(c) MS Flat 25x6 mm
Horizontal 4x4x0.45 mtrs.= 7.20 mtrs
7.20 @ 1.20 kgl per mtr.=8.64 kg.
(d)MS Sheet 1.00 mm thick
1x250x100 mm = 0.025 sqm.
0.025 sqm. @ 7.85 kg l per sqm.=0.20 kg
Quantity (a+b+c+d) = 7.04+5.76+8.64+0.20=
21.64 kg
Say 0.216 Qtl.
10.002
Structural steel work riveted, bolted or welded in builtup Kg
21.60
66.52
sections, trusses etc ..and app
2205
Carraige of Steel
tonne
0.0216
77.87
2) Painting
(e) M.S. Angle 25x25x3 mm
Verticle 2x2(6.40x0.025) = 0.64 sqm.
(f) M.S. Flat
Verticle / Horizontal 2x 9.60 +7.20 x 0.025 =
0.84 sqm.
(g) M. S. Sheet
1x2x0.25 x 0.10 = 0.05 sqm.
Total Area for primer & painting
(e+f+g) 0.64+0.84+0.05 =1.53 sqm
13.061.01

0114

Painting with synthetic enamel paint : Two or more coats on Sqm

new work
LABOUR:
For fixing
Beldar
Day

1.53

53.87

0.07

247.00
Total:
18.97

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

19.16
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

DSR-12

Rs 1541.28
Rs 1540.85

Page 1089 of 2298

Item Code: 23.27

Providing and fixing M. S. tree guard 50 cm square in plan, height 1.40 metre above ground level and 0.50 metre below ground
level...
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
Details of cost for one tree guard
(Ref. Fig. 2 of Tree Guard)
(a)MS Angle iron 25x25x5 mm
Verticle 4x1.9O mtrs = 7.60 mtrs
7.60 mtrs. @ 1.80 kg. I per mtr.=13.68 Kg
(b) MS Flat 25x5 mm
Verticle 2x4x1.40 mtrs.= 11.20 mtrs
11.20 @ 1.00kg I per mtr.= 11.20 kg
(c)MS Flat 25x6 mm
Horizontal 4x4x0.50 mtrs.= 8.00 mtrs
8 mtrs. @ 1.20 kg / per mtr.= 9.60 kg
(d)MS Sheet 1.00 mm thick
1x250x100 mm = 0.025 sqm.
0.025 sqm. @ 7.85 kg / per sqm.= 0.20 kg
Structural steel work welded in built up section:
(a+b+c+d) =13.68+11.20+9.60+0.20= 34.68 kg
= 0.3468 Qtl.
Say 34.68 kg
10.002

Structural steel work riveted, bolted or welded in builtup Kg

sections, trusses etc ..and app
(e) M. S. Angle
Verticle 2x2(7.60x0.025)= 0.76 sqm.
(f) M. S. flat
Verticle / Horizontal 2x19.20x 0.025 = 0.96 sqm.
(g) M. S. Sheet
M. S. Sheet 1x2x025x 0.10 = 0.05 sqm.
Total area for primer & painting =
e+f+g= 1.77 sqm

13.061.01

Painting with synthetic enamel paint : Two or more coats on Sqm

new work
LABOUR:
For fixing
Beldar
Day

0114

34.68

66.52

1.77

53.87

0.07

247.00
Total:
17.29

Add water charges @ 1% except on [A]+[B] i.e on

Add C.P & OH @15% except on [A]+[B] i.e on

17.46
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 2422.34
Rs 2401.60

Item Code: 23.28

Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth,
breaking clods, watering of each layer, dressing etc..

Code
0114
0115
0101

DSR-12

Description
LABOUR:
Beldar
Coolie
Bhisti

Details of Cost for : 10.00 Cum

Unit
Quantity
Day
Day
Day

2.20
3.60
0.40

Rate
247.00
247.00
260.00

Page 1090 of 2298

9999

Sundries

L.S.

1.36

Add water charges @ 1% on

1.49
Total:
1538.63

Add C.P & OH @15% on

1554.02
Cost for 10.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 178.71
Rs 178.70

Item Code: 23.29.1

Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 - Top inside dia 35 cm,
outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm.
Details of Cost for : 1.00 No.
Unit
Quantity

Code

Description
Details of cost for one pot
MATERIAL:
M.S. wire 3.5 mm dia
8 vertical wire 8 X 0.35= 2.80 mtr.
3 Horizontal wire 3 x 3.14 x 0.3 (av)= 2.83
Total = 5.63
Add wastage @ 5% = 0.28
Total = 5.91
5.91 Mtr. @ 0.08 Kg! M = 0.4728 Say 0.47 Kg

05.022.01

Reinforcement for R.C.C. work all complete. -Upto plinth level

Mild steel and Medium Tensi
Reinforced cement concrete work
Cement concrete 1:2:4
Area= (1/2) x[(3.14x 0.35)+ (3.14 x 0.25])x
0.35+3.14x 0.125 x 0.125 = 0.3787 say 0.379
s m.
Tlhickness of Pots 2.54 cm or 0.0254 m
Cubical volume 0.379 x 0.0254 = 0.0096
Say = 0.010 cum
P/L specified grade of RCC excluding centering, shuttering,
finishing and reinforcement Neat cement punning
Centering and shuttering .. .. : Small lintels not exceeding
1.5m clear span, moulding as

05.001.03
13.018
05.009.15

Rate

Kg

0.47

56.77

Cum

0.01

4703.91

Sqm
Sqm

0.379
0.38

31.12
166.88

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total:
0.00

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

0.00
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 148.92
Rs 148.30

Item Code: 23.29.2

Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 - Top inside dia 30 cm,
outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mm

Code

Description

Details of Cost for : 1.00 No.

Unit
Quantity

Rate

MATERIALS:
Details of cost for one pot

DSR-12

Page 1091 of 2298

M.S. wire 3.5 mm dia

8 vertical wire 8 X 0.30= 2.40
3Horizontal wire 3x3.14x0.25(av)= 2.36
Total = 4.76
Add wastage @ 5%= 0.24
Total = 5.00
5.00 Mtr.@ 0.08 Kg! M=0.40 Say 0.40 Kg
05.022.01

Reinforcement for R.C.C. work all complete. -Upto plinth level Kg

Mild steel and Medium Tensi
Reinforced cement concrete work
Cement concrete 1:2:4
Area= (1!2)x((3.14x 0.30) + (3.14 x 0.2))x
0.30+3.14x 0.10 x 0.10 = 0.2669 say 0.267
sqm.
Thickness of Pots 2.54 cm or 0.0254 m
Cubical volume 0.267 x 0.0254 = 0.00678
Say = 0.007 cum

05.001.03

P/L specified grade of RCC excluding centering, shuttering, Cum

finishing and reinforcement Neat cement punning
Sqm
Centering and shuttering .. .. : Small lintels not exceeding Sqm
1.5m clear span, moulding as

13.018
05.009.15

0.40

56.77

0.007

4703.91

0.267
0.27

31.12
166.88

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total:
0.00

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

0.00
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 109.01
Rs 109.00

Item Code: 23.30.1

Providing Square Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 .. Top inner width 35 cm,
outer bottom width 25 cm, total height 35 cm and wall thickness 25.4 mm.

Description
Details of cost for one pot
MATERIALS:
M.S. wire 3.5 mm dia
8 vertical wire8 X 0.85= 2.80
3 Horizontal wire 3 x 3.14 x 0.3 (av)= 2.83
Total = 5.63
Add wastage @ 5%= 0.28
Total = 5.91
5.91 Mtr. @ 0.08 Kg! M =0.4728 Say 0.47Kg

05.022.01

Reinforcement for R.C.C. work all complete. -Upto plinth level Kg

Mild steel and Medium Tensi
Reinforced cement concrete work
Area=
(1x0.25x0.25)+4x(1/2)(O.35+0.25)x.35=0.4825
sqm. Say 0.483 sqm
Thickness of Pots 2.54 cm or 0.0254 m
Cubicel volume 0.483 x 0.0254 = 0.0123 cum
P/L specified grade of RCC excluding centering, shuttering, Cum
finishing and reinforcement -

05.001.03

DSR-12

Details of Cost for : 1.00 No.

Unit
Quantity

Code

Rate

0.47

56.77

0.0123

4703.91

Page 1092 of 2298

13.018
05.009.15

Neat cement punning

Sqm
Centering and shuttering .. .. : Small lintels not exceeding Sqm
1.5m clear span, moulding as

0.483
0.48

31.12
166.88

Add water charges @ 1% except on [A]+[B]+[C]+[D] i.e on

Total:
0.00

Add C.P & OH @15% except on [A]+[B]+[C]+[D] i.e on

0.00
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 179.67
Rs 179.65

Item Code: 24.1.1.1

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) .. .. All types of
soil - 300 mm dia.
Details of Cost for : 35.00 m
Code
Description
Unit
Quantity
Rate
0020
Hydraulic Excavator (3D) with driver and fuel.
Day
1.00
7500.00
0005
Hire charges of Diesel Truck - 9 tonne
Day
0.4286
1600.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting)
(2 x30)/140
Loading, unloading &Errection charges of
drilling Rig Machine
0114
Beldar
Day
4.00
247.00
0130
Mistry
Day
1.00
301.00
7763
Water supply tanker of 5000 litre capacity
Nos
1.00
600.00
Extra labour to assist M/C operator & security
0114
Beldar
Day
2.00
247.00
0113
Chowkidar
Day
1.00
247.00
Total:
Add water charges @ 1% on
10815.76
Add C.P & OH @15% on
10923.92
Cost for 35.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 358.93
Rs 358.90

Item Code: 24.1.1.2

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) .. .. All types of
soil - 350 mm dia.
Details of Cost for : 32.00 m
Code
Description
Unit
Quantity
Rate
0020
Hydraulic Excavator (3D) with driver and fuel.
Day
1.00
7500.00
0005
Hire charges of Diesel Truck - 9 tonne
Day
0.4286
1600.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting)
(2 x30)/140
Loading, unloading &Errection charges of
drilling Rig Machine
0114
Beldar
Day
4.00
247.00
0130
Mistry
Day
1.00
301.00
7763
Water supply tanker of 5000 litre capacity
Nos
1.00
600.00
Extra labour to assist M/C operator & security
0114
Beldar
Day
2.00
247.00
0113
Chowkidar
Day
1.00
247.00
Total:

DSR-12

Page 1093 of 2298

Add water charges @ 1% on

10815.76

Add C.P & OH @15% on

10923.92
Cost for 32.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 392.58
Rs 392.60

Item Code: 24.1.1.3

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) .. .. All types of
soil - 400 mm dia.
Details of Cost for : 25.00 m
Code
Description
Unit
Quantity
Rate
0020
Hydraulic Excavator (3D) with driver and fuel.
Day
1.00
7500.00
0005
Hire charges of Diesel Truck - 9 tonne
Day
0.4286
1600.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting)
(2 x30)/140
Loading, unloading &Errection charges of
drilling Rig Machine
0114
Beldar
Day
4.00
247.00
0130
Mistry
Day
1.00
301.00
7763
Water supply tanker of 5000 litre capacity
Nos
1.00
600.00
Extra labour to assist M/C operator & security
0114
Beldar
Day
2.00
247.00
0113
Chowkidar
Day
1.00
247.00
Total:
Add water charges @ 1% on
10815.76
Add C.P & OH @15% on
10923.92
Cost for 25.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 502.50
Rs 502.50

Item Code: 24.1.2.1

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) .. .. Rocky strata
including Boulders - 300 mm dia.
Details of Cost for : 16.00 m
Code
Description
Unit
Quantity
Rate
0020
Hydraulic Excavator (3D) with driver and fuel.
Day
0.90
7500.00
Extra diesel required for boring in rocky strata
1235
Diesel oil
litre
6.00
41.29
0005
Hire charges of Diesel Truck - 9 tonne
Day
0.4286
1600.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting)
(2 x30)/140
Loading, unloading &Errection charges of
drilling Rig Machine
0114
Beldar
Day
4.00
247.00
0130
Mistry
Day
1.00
301.00
7763
Water supply tanker of 5000 litre capacity
Nos
1.00
600.00
Extra labour to assist M/C operator & security
0134
Rock Hole Driller
Day
0.75
247.00
0114
Beldar
Day
3.00
247.00
0103
Blacksmith 2nd class
Day
0.75
273.00
0113
Chowkidar
Day
1.00
247.00
Total:

DSR-12

Page 1094 of 2298

Add water charges @ 1% on

10950.50

Add C.P & OH @15% on

11060.01
Cost for 16.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 794.94
Rs 797.90

Item Code: 24.1.2.2

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) .. .. Rocky strata
including Boulders - 350 mm dia.
Details of Cost for : 16.00 m
Code
Description
Unit
Quantity
Rate
0020
Hydraulic Excavator (3D) with driver and fuel.
Day
0.90
7500.00
Extra diesel required for boring in rocky strata
1235
Diesel oil
litre
8.00
41.29
0005
Hire charges of Diesel Truck - 9 tonne
Day
0.4286
1600.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting)
(2 x30)/140
Loading, unloading &Errection charges of
drilling Rig Machine
0114
Beldar
Day
4.00
247.00
0130
Mistry
Day
1.00
301.00
7763
Water supply tanker of 5000 litre capacity
Nos
1.00
600.00
Extra labour to assist M/C operator & security
0134
Rock Hole Driller
Day
1.00
247.00
0114
Beldar
Day
4.00
247.00
0103
Blacksmith 2nd class
Day
0.75
273.00
0113
Chowkidar
Day
1.00
247.00
Total:
Add water charges @ 1% on
11341.83
Add C.P & OH @15% on
11455.25
Cost for 16.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 823.35
Rs 827.30

Item Code: 24.1.2.3

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) .. .. Rocky strata
including Boulders - 400 mm dia.
Details of Cost for : 16.00 m
Code
Description
Unit
Quantity
Rate
0020
Hydraulic Excavator (3D) with driver and fuel.
Day
0.90
7500.00
Extra diesel required for boring in rocky strata
1235
Diesel oil
litre
16.00
41.29
0005
Hire charges of Diesel Truck - 9 tonne
Day
0.4286
1600.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting)
(2 x30)/140
Loading, unloading &Errection charges of
drilling Rig Machine
0114
Beldar
Day
4.00
247.00
0130
Mistry
Day
1.00
301.00
7763
Water supply tanker of 5000 litre capacity
Nos
1.00
600.00
Extra labour to assist M/C operator & security
0134
Rock Hole Driller
Day
1.20
247.00

DSR-12

Page 1095 of 2298

0114
0103
0113

Beldar
Blacksmith 2nd class
Chowkidar

Day
Day
Day

8.00
0.75
1.00

Add water charges @ 1% on

247.00
273.00
247.00
Total:
12709.55

Add C.P & OH @15% on

12836.65
Cost for 16.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 922.63
Rs 927.35

Item Code: 24.2.1.1

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) ..All types of soil
- 300 mm dia.
Details of Cost for : 30.00 m
Code
Description
Unit
Quantity
Rate
0020
Hydraulic Excavator (3D) with driver and fuel.
Day
1.00
7500.00
0005
Hire charges of Diesel Truck - 9 tonne
Day
0.4286
1600.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting)
(2 x30)/140
Loading, unloading &Errection charges of
drilling Rig Machine
0114
Beldar
Day
4.00
247.00
0130
Mistry
Day
1.00
301.00
7763
Water supply tanker of 5000 litre capacity
Nos
1.00
600.00
Extra labour to assist M/C operator & security
0114
Beldar
Day
2.00
247.00
0113
Chowkidar
Day
1.00
247.00
Total:
Add water charges @ 1% on
10815.76
Add C.P & OH @15% on
10923.92
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 418.75
Rs 418.75

Item Code: 24.2.1.2

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) ..All types of soil 350 mm dia.
Details of Cost for : 27.00 m
Code
Description
Unit
Quantity
Rate
0020
Hydraulic Excavator (3D) with driver and fuel.
Day
1.00
7500.00
0005
Hire charges of Diesel Truck - 9 tonne
Day
0.4286
1600.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting)
(2 x30)/140
Loading, unloading &Errection charges of
drilling Rig Machine
0114
Beldar
Day
4.00
247.00
0130
Mistry
Day
1.00
301.00
7763
Water supply tanker of 5000 litre capacity
Nos
1.00
600.00
Extra labour to assist M/C operator & security
0114
Beldar
Day
2.00
247.00
0113
Chowkidar
Day
1.00
247.00
Total:

DSR-12

Page 1096 of 2298

Add water charges @ 1% on

10815.76

Add C.P & OH @15% on

10923.92
Cost for 27.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 465.28
Rs 465.30

Item Code: 24.2.1.3

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I) ..All types of soil 400 mm dia.
Details of Cost for : 20.00 m
Code
Description
Unit
Quantity
Rate
0020
Hydraulic Excavator (3D) with driver and fuel.
Day
1.00
7500.00
0005
Hire charges of Diesel Truck - 9 tonne
Day
0.4286
1600.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting)
(2 x30)/140
Loading, unloading &Errection charges of
drilling Rig Machine
0114
Beldar
Day
4.00
247.00
0130
Mistry
Day
1.00
301.00
7763
Water supply tanker of 5000 litre capacity
Nos
1.00
600.00
Extra labour to assist M/C operator & security
0114
Beldar
Day
2.00
247.00
0113
Chowkidar
Day
1.00
247.00
Total:
Add water charges @ 1% on
10815.76
Add C.P & OH @15% on
10923.92
Cost for 20.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 628.13
Rs 628.10

Item Code: 24.2.2.1

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), .. .. Rocky strata
including Boulders - 300 mm dia.
Details of Cost for : 16.00 m
Code
Description
Unit
Quantity
Rate
0020
Hydraulic Excavator (3D) with driver and fuel.
Day
0.90
7500.00
Extra diesel required for boring in rocky strata
1235
Diesel oil
litre
10.00
41.29
0005
Hire charges of Diesel Truck - 9 tonne
Day
0.4286
1600.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting)
(2 x30)/140
Loading, unloading &Errection charges of
drilling Rig Machine
0114
Beldar
Day
4.00
247.00
0130
Mistry
Day
1.00
301.00
7763
Water supply tanker of 5000 litre capacity
Nos
1.00
600.00
Extra labour to assist M/C operator & security
0134
Rock Hole Driller
Day
1.00
247.00
0114
Beldar
Day
5.00
247.00
0103
Blacksmith 2nd class
Day
0.70
273.00
0113
Chowkidar
Day
1.00
247.00
Total:

DSR-12

Page 1097 of 2298

Add water charges @ 1% on

11657.76

Add C.P & OH @15% on

11774.34
Cost for 16.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 846.28
Rs 851.20

Item Code: 24.2.2.2

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), .. .. Rocky strata
including Boulders - 350 mm dia.
Details of Cost for : 16.00 m
Code
Description
Unit
Quantity
Rate
0020
Hydraulic Excavator (3D) with driver and fuel.
Day
0.90
7500.00
Extra diesel required for boring in rocky strata
1235
Diesel oil
litre
12.00
41.29
0005
Hire charges of Diesel Truck - 9 tonne
Day
0.4286
1600.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting)
(2 x30)/140
Loading, unloading &Errection charges of
drilling Rig Machine
0114
Beldar
Day
4.00
247.00
0130
Mistry
Day
1.00
301.00
7763
Water supply tanker of 5000 litre capacity
Nos
1.00
600.00
Extra labour to assist M/C operator & security
0134
Rock Hole Driller
Day
1.00
247.00
0114
Beldar
Day
6.00
247.00
0103
Blacksmith 2nd class
Day
0.75
273.00
0113
Chowkidar
Day
1.00
247.00
Total:
Add water charges @ 1% on
12000.99
Add C.P & OH @15% on
12121.00
Cost for 16.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 871.20
Rs 875.10

Item Code: 24.2.2.3

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), .. .. Rocky strata
including Boulders - 400 mm dia.
Details of Cost for : 14.00 m
Code
Description
Unit
Quantity
Rate
0020
Hydraulic Excavator (3D) with driver and fuel.
Day
0.95
7500.00
Extra diesel required for boring in rocky strata
1235
Diesel oil
litre
16.00
41.29
0005
Hire charges of Diesel Truck - 9 tonne
Day
0.4286
1600.00
Transportation charges for to and fro to site
(assume 140m of bore for one shifting)
(2 x30)/140
Loading, unloading &Errection charges of
drilling Rig Machine
0114
Beldar
Day
4.00
247.00
0130
Mistry
Day
1.00
301.00
7763
Water supply tanker of 5000 litre capacity
Nos
1.00
600.00
Extra labour to assist M/C operator & security
0134
Rock Hole Driller
Day
1.20
247.00

DSR-12

Page 1098 of 2298

0114
0103
0113

Beldar
Blacksmith 2nd class
Chowkidar

Day
Day
Day

8.00
1.00
1.00

Add water charges @ 1% on

247.00
273.00
247.00
Total:
13152.80

Add C.P & OH @15% on

13284.33
Cost for 14.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1091.21
Rs 1096.60

Item Code: 24.3.1

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe .. - 100
mm nominal size dia.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
7758
uPVC blind pipe 100 mm dia as per IS: 12818
m
100.00
385.00
2321
Carraige of Spun iron S & S pipes 150 mm dia
100 m
50.00
319.12
Qty = 50 to consider 50% of carriage as per
2321
LABOUR:
For lowering
0114
Beldar
Day
0.50
247.00
0115
Coolie
Day
0.50
247.00
Total:
Add water charges @ 1% on
38906.56
Add C.P & OH @15% on
39295.63
Cost for 100.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 451.90
Rs 452.00

Item Code: 24.3.2

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe .. - 150
mm nominal size dia.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
7745
PVC blind pipe 150 mm dia as per IS: 12818
m
100.00
460.00
2321
Carraige of Spun iron S & S pipes 150 mm dia
100 m
50.00
319.12
Qty = 50 to consider 50% of carriage as per
2321
LABOUR:
For lowering
0114
Beldar
Day
0.50
247.00
0115
Coolie
Day
0.50
247.00
9999
Sundries (Adhesive etc.,)
L.S.
10.07
1.49
Total:
Add water charges @ 1% on
46421.56
Add C.P & OH @15% on
46885.78
Cost for 100.00 m
Rate per One Metre:
Rate as per DSR-12:

DSR-12

Rs 539.19
Rs 539.15

Page 1099 of 2298

Item Code: 24.3.3

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe .. - 200
mm nominal size dia.
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
7746
PVC blind pipe 200 mm dia as per IS: 12818
m
100.00
834.75
2322
Carraige of Spun iron S & S pipes 200 mm dia
100 m
50.00
519.11
Qty = 50 to consider 50% of carriage as per
2322
LABOUR:
For lowering
0114
Beldar
Day
0.50
247.00
0115
Coolie
Day
0.50
247.00
Total:
Add water charges @ 1% on
83981.56
Add C.P & OH @15% on
84821.38
Cost for 100.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 975.45
Rs 975.80

Item Code: 24.4.1

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes .. ..
100 mm nominal size dia
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
7759
uPVC slotted pipe 100 mm dia as per IS: 12818
m
100.00
390.00
2321
Carraige of Spun iron S & S pipes 150 mm dia
100 m
50.00
319.12
Qty = 50 to consider 50% of carriage as per
2321
LABOUR:
For lowering
0114
Beldar
Day
0.50
247.00
0115
Coolie
Day
0.50
247.00
9999
Sundries (Adhesive etc.,)
L.S.
10.07
1.49
Total:
Add water charges @ 1% on
39421.56
Add C.P & OH @15% on
39815.78
Cost for 100.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 457.88
Rs 457.80

Item Code: 24.4.2

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes .. ..
150 mm nominal size dia
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
7751
PVC slotted pipe 150 mm dia as per IS: 12818
m
100.00
465.15
2321
Carraige of Spun iron S & S pipes 150 mm dia
100 m
50.00
319.12
Qty = 50 to consider 50% of carriage as per

DSR-12

Page 1100 of 2298

0114
0115
9999

2321
LABOUR:
For lowering
Beldar
Coolie
Sundries (Adhesive etc.,)

Day
Day
L.S.

0.50
0.50
10.07

Add water charges @ 1% on

247.00
247.00
1.49
Total:
46936.56

Add C.P & OH @15% on

47405.93
Cost for 100.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 545.17
Rs 544.15

Item Code: 24.4.3

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes .. ..
200 mm nominal size dia
Details of Cost for : 100.00 m
Code
Description
Unit
Quantity
Rate
MATERIALS:
7752
PVC slotted pipe 200 mm dia as per IS: 12818
m
100.00
840.00
2322
Carraige of Spun iron S & S pipes 200 mm dia
100 m
50.00
519.11
Qty = 50 to consider 50% of carriage as per
2322
LABOUR:
For lowering
0114
Beldar
Day
0.50
247.00
0115
Coolie
Day
0.50
247.00
9999
Sundries (Adhesive etc.,)
L.S.
13.42
1.49
Total:
Add water charges @ 1% on
84526.56
Add C.P & OH @15% on
85371.83
Cost for 100.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 981.78
Rs 971.70

Item Code: 24.5

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness ..

Code
7753
0114
9999

Description
MATERIALS:
Boulder 50 mm to 200 mm
Beldar
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity
Cum
Day
L.S.

1.00
0.25
1.00

Add water charges @ 1% on

Rate
332.00
247.00
1.49
Total:
395.24

Add C.P & OH @15% on

399.19
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

DSR-12

Rs 459.07
Rs 459.05

Page 1101 of 2298

Item Code: 24.6

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders ..

Code
7754
0114
9999

Description
MATERIALS:
Gravel 5 mm to 10 mm (including carriage)
Beldar
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity
Cum
Day
L.S.

1.00
0.25
1.00

Add water charges @ 1% on

Rate
650.00
247.00
1.49
Total:
713.24

Add C.P & OH @15% on

720.37
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 828.43
Rs 828.45

Item Code: 24.7

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit..
Details of Cost for : 1.00 Cum
Code
Description
Unit
Quantity
MATERIALS:
7755
Gravel 1.5 mm to 2 mm (including carriage)
Cum
1.00
0114
Beldar
Day
0.25
9999
Sundries
L.S.
1.00
Add water charges @ 1% on

Rate
625.00
247.00
1.49
Total:
688.24

Add C.P & OH @15% on

695.12
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 799.39
Rs 799.40

Item Code: 24.8

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse ..

Code
7772
0114
9999

Description
MATERIALS:
Pea Gravel (including carriage)
Beldar
Sundries

Details of Cost for : 1.00 Cum

Unit
Quantity
Cum
Day
L.S.

1.00
0.30
1.00

Add water charges @ 1% on

Rate
650.00
247.00
1.49
Total:
725.59

Add C.P & OH @15% on

732.85
Cost for 1.00 Cum
Rate per One Cum:
Rate as per DSR-12:

Rs 842.78
Rs 842.80

Item Code: 24.9

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000
x 450x50 mm ..
Details of Cost for : 1.00 No.

DSR-12

Page 1102 of 2298

Code

7762
9999

Description
Details of cost for One No. RCC drain cover
MATERIALS:
Precast R.C.C. perforated slab
Carriage and fixing charges

Unit

Quantity

Rate

Nos
L.S.

1.00
15.00

750.00
1.49
Total:
772.35

Add water charges @ 1% on

Add C.P & OH @15% on

780.07
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 897.08
Rs 897.10

Item Code: 24.10.1

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel
screwed and socketed/ plain ended casing pipes - 100 mm nominal size dia having minimum wall thickness 5.00 mm

Code
7757
7764
2343

13.065.01

0114
0130

Details of Cost for : 30.00 m

Unit
Quantity

Description
MATERIALS:
M.S. pipe 100 mm dia casing pipe
M.S. socket 100 mm dia
Carraige of Ductile iron pipes (k7) 100 mm dia
including loading and unloading
Painting with Anticorrosive Paint
3.14 x.11 x30.00=10.36 sqm.

m
m
100 m

Painting with black anti-corrosive bitumastic paint : Two or Sqm

more coats on new work.
LABOUR:
Beldar
Day
Mistry
Day

Rate

30.00
5.00
30.00

750.00
165.00
191.48

10.36

44.56

1.35
0.50

247.00
301.00
Total:
23866.39

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

24105.05
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 939.42
Rs 950.00

Item Code: 24.10.2

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel
screwed and socketed/ plain ended casing pipes - 150 mm nominal size dia having minimum wall thickness 5.00 mm

Code
7743
7765
2344

13.065.01

DSR-12

Description
MATERIALS:
M.S. pipe 150 mm dia casing pipe
M.S. socket 150 mm dia
Carraige of Cast iron pipes 150 mm dia
including loading and unloading
Painting with Anticorrosive Paint
3.14 x0.16x30.00=15.07 sqm.
Painting with black anti-corrosive bitumastic paint : Two or
more coats on new work.
LABOUR:

Details of Cost for : 30.00 m

Unit
Quantity

Rate

m
Nos
100 m

30.00
5.00
30.00

1042.00
200.00
319.12

Sqm

15.07

44.56

Page 1103 of 2298

0114
0130

Beldar
Mistry

Day
Day

1.40
0.50

Add water charges @ 1% except on [A] i.e on

247.00
301.00
Total:
32852.04

Add C.P & OH @15% except on [A] i.e on

33180.56
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1294.31
Rs 1297.90

Item Code: 24.10.3

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel
screwed and socketed/ plain ended casing pipes - 200 mm nominal size dia having minimum wall thickness 5.40 mm

Code
7744
7766
2345

13.065.01

0114
0130

Details of Cost for : 30.00 m

Unit
Quantity

Description
MATERIALS:
M.S. pipe 200 mm dia casing pipe
M.S. socket 200 mm dia
Carraige of Cast iron pipes 200 mm dia
including loading and unloading
Painting with Anticorrosive Paint
3.14 x 0.21 x 30.00=20.25 sqm.

m
Nos
100 m

Painting with black anti-corrosive bitumastic paint : Two or Sqm

more coats on new work.
LABOUR:
Beldar
Day
Mistry
Day

Rate

30.00
5.00
30.00

1250.00
250.00
519.11

20.25

44.56

1.35
0.50

247.00
301.00
Total:
39389.68

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

39783.58
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1555.12
Rs 1557.65

Item Code: 24.11.1

Supplying, assembling, lowering and fixing in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted mild steel threaded
and socketed / plain bevel ended pipe - 100 mm nominal size dia

Code
7757
7764
9999
2343

13.065.01

0114

DSR-12

Description
MATERIALS:
M.S. pipe 100 mm dia casing pipe
M.S. socket 100 mm dia
Extra for making slots
Carraige of Ductile iron pipes (k7) 100 mm dia
including loading and unloading
Painting with Anticorrosive Paint
3.14 x.11 x30.00=10.36 sqm.

Details of Cost for : 30.00 m

Unit
Quantity
m
m
L.S.
100 m

Painting with black anti-corrosive bitumastic paint : Two or Sqm

more coats on new work.
LABOUR:
Beldar
Day

Rate

30.00
5.00
906.04
30.00

750.00
165.00
1.49
191.48

10.36

44.56

1.35

247.00

Page 1104 of 2298

0130

Mistry

Day

0.50

Add water charges @ 1% except on [A] i.e on

301.00
Total:
25216.39

Add C.P & OH @15% except on [A] i.e on

25468.55
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 991.68
Rs 1002.30

Item Code: 24.11.2

Supplying, assembling, lowering and fixing in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted mild steel threaded
and socketed / plain bevel ended pipe - 150 mm nominal size dia

Code
7743
7765
9999
2344

13.065.01

0114
0130

Description
MATERIALS:
M.S. pipe 150 mm dia casing pipe
M.S. socket 150 mm dia
Extra for making slots
Carraige of Cast iron pipes 150 mm dia
including loading and unloading
Painting with Anticorrosive Paint
3.14 x.0.16x30.00=15.07 sqm.

Details of Cost for : 30.00 m

Unit
Quantity
m
Nos
L.S.
100 m

Painting with black anti-corrosive bitumastic paint : Two or Sqm

more coats on new work.
LABOUR:
Beldar
Day
Mistry
Day

Rate

30.00
5.00
1208.05
30.00

1042.00
200.00
1.49
319.12

15.07

44.56

1.40
0.50

247.00
301.00
Total:
34652.03

Add water charges @ 1% except on [A] i.e on

Add C.P & OH @15% except on [A] i.e on

34998.55
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1364.00
Rs 1373.40

Item Code: 24.11.3

Supplying, assembling, lowering and fixing in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted mild steel threaded
and socketed / plain bevel ended pipe - 200 mm nominal size dia

Code
7744
9999
7766
2345

13.065.01

0114

DSR-12

Description
MATERIALS:
M.S. pipe 200 mm dia casing pipe
Extra for making slots
M.S. socket 200 mm dia
Carraige of Cast iron pipes 200 mm dia
including loading and unloading
Painting with Anticorrosive Paint
3.14 x 0.21 x 30.00=20.25 sqm.

Details of Cost for : 30.00 m

Unit
Quantity
m
L.S.
Nos
100 m

Painting with black anti-corrosive bitumastic paint : Two or Sqm

more coats on new work.
LABOUR:
Beldar
Day

Rate

30.00
1208.05
5.00
30.00

1250.00
1.49
250.00
519.11

20.25

44.56

1.40

247.00

Page 1105 of 2298

0130

Mistry

Day

0.50

Add water charges @ 1% except on [A] i.e on

301.00
Total:
41202.02

Add C.P & OH @15% except on [A] i.e on

41614.04
Cost for 30.00 m
Rate per One Metre:
Rate as per DSR-12:

Rs 1625.28
Rs 1627.80

Item Code: 24.12

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield
without sand content (beyond permissible limit), with required capacity air compressor..

Code
0040
1235

Details of Cost for : 8.00 Nos

Description
Unit
Quantity
Air compressor 250 cfm with two leads for pneumatic cutters/ day
1.00
hammers
Diesel oil
litre
48.00
Add water charges @ 1% on

Rate
1800.00
41.29
Total:
3781.92

Add C.P & OH @15% on

3819.74
Cost for 8.00 Nos
Rate per Each:
Rate as per DSR-12:

Rs 549.09
Rs 549.10

Item Code: 24.13.1

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe..100 mm
dia
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
100mm dia with screwed cap with locking arrangement
7760
M.S. cap 100 mm dia
Nos
1.00
120.00
7760
Add 5% on above item for labour factor
Nos
0.05
120.00
Total:
Add water charges @ 1% on
126.00
Add C.P & OH @15% on
127.26
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 146.35
Rs 146.35

Item Code: 24.13.2

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe..150 mm
dia
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
150mm dia with screwed cap with locking arrangement
7747
M.S. cap 150 mm dia
Nos
1.00
150.00
7747
Add 5% on above item for labour factor
Nos
0.05
150.00
Total:
Add water charges @ 1% on
157.50

DSR-12

Page 1106 of 2298

Add C.P & OH @15% on

159.08
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 182.94
Rs 182.95

Item Code: 24.13.3

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe..200 mm
dia
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
200mm dia with screwed cap with locking arrangement
7748
M.S. cap 200 mm dia
Nos
1.00
180.00
7748
Add 5% on above item for labour factor
Nos
0.05
180.00
Total:
Add water charges @ 1% on
189.00
Add C.P & OH @15% on
190.89
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 219.52
Rs 219.50

Item Code: 24.14.1

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I) - 100 mm
clamp
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
Clamps made of MS flat of size 100x10mm thick
1x2mx7.80 kg per metre = 15.60 kg
10.001
Structural steel work in single section fixed with or without Kg
15.60
59.90
connecting plate including a
9999
Sundries, nuts and bolts etc.,
L.S.
25.00
1.49
Total:
Add water charges @ 1% except on [A] i.e on
37.25
Add C.P & OH @15% except on [A] i.e on
37.62
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 977.70
Rs 977.70

Item Code: 24.14.2

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I) - 150 mm
clamp
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
Clamps made of MS flat of size 100x10mm thick
1x2.10mx7.80 kg per metre = 16.38 kg
10.001
Structural steel work in single section fixed with or without Kg
16.38
59.90
connecting plate including a
9999
Sundries, nuts and bolts etc.,
L.S.
30.00
1.49
Total:

DSR-12

Page 1107 of 2298

Add water charges @ 1% except on [A] i.e on

44.70

Add C.P & OH @15% except on [A] i.e on

45.15
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1033.08
Rs 1033.10

Item Code: 24.14.3

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I) - 200 mm
clamp
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
Clamps made of MS flat of size 100x10mm thick
1x2.4mx7.80 kg per metre = 18.72 kg
10.001
Structural steel work in single section fixed with or without Kg
18.72
59.90
connecting plate including a
9999
Sundries, nuts and bolts etc.,
L.S.
30.00
1.49
Total:
Add water charges @ 1% except on [A] i.e on
44.70
Add C.P & OH @15% except on [A] i.e on
45.15
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 1173.25
Rs 1173.25

Item Code: 24.15.1

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I) 100mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7761
M.S. bail plug 100 mm dia
Nos
1.00
140.00
9999
Sundries
L.S.
5.00
1.49
Total:
Add water charges @ 1% on
147.45
Add C.P & OH @15% on
148.92
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 171.26
Rs 171.30

Item Code: 24.15.2

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I) 150mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7749
M.S bail plug 150 mm dia
Nos
1.00
170.00
9999
Sundries
L.S.
5.00
1.49
Total:
Add water charges @ 1% on
177.45
Add C.P & OH @15% on

DSR-12

179.22

Page 1108 of 2298

Cost for 1.00 No.

Rate per Each:
Rate as per DSR-12:

Rs 206.10
Rs 206.10

Item Code: 24.15.3

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I) 200mm
Details of Cost for : 1.00 No.
Code
Description
Unit
Quantity
Rate
MATERIALS:
7750
M.S bail plug 200 mm dia
Nos
1.00
200.00
9999
Sundries
L.S.
5.00
1.49
Total:
Add water charges @ 1% on
207.45
Add C.P & OH @15% on
209.52
Cost for 1.00 No.
Rate per Each:
Rate as per DSR-12:

Rs 240.95
Rs 240.95

Item Code: 25.1

Raking out joints of stone masonry surface to the required width and depth, with due care and precaution, by mechanical / manual
means ..
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
LABOUR:
0114
Beldar
Day
0.53
247.00
0115
Coolie
Day
0.08
247.00
0101
Bhisti
Day
0.07
260.00
9999
Sundries
L.S.
1.43
1.49
Total:
Add water charges @ 1% on
171.00
Add C.P & OH @15% on
172.71
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 19.86
Rs 19.85

Item Code: 25.2

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height,
above ground level ..
Details of Cost for : 202.50 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
Assuming shutterlng material will become unserviceable after
use of 40 times
Adding for maintenance @ 10% of cost
Taking slvage value after full use of material @ 25% of cost

DSR-12

7397

Base Jack
Qty taken for cost of using once=14x0.85/40=0.2975

Nos

0.30

180.00

4009

Mild steel tubes hot finished welded type

40mm dia Mild steel tubes

kilog

80.02

48.00

Page 1109 of 2298

Vertical standard 2.5m |ength=7x2x9x2.5=

315.00 m
Side support 6.00m length=3x2x6.00=36.00m
Horizonatal support 3.00m
length=18x3x3.00=162.00m
TotaI=1026.00m @ 3.67 kg/m =37S5.42 kg
Qty taken for cost of using once=
3765.42x0.85/40=80.02kg
7387

Spigot for standerd jointing

7x2x9=126 nos x 0.40m length =50.40m
[email protected] /m=123.98kg
Qty taken for cost of using once=
123.98x0.85140=2.63kg

Kg

2.63

45.00

1034

Bolts and nuts up to 300 mm in length

for spigot
2x7x2x9=252 nos
@ 0.15 kg each=37.80
kg =0.378q
Qty taken for cost of using once=
0.378x0.85/40=0.008q

quint

0.008

5400.00

7346

Double coupler
Clamp coupler for tixing MS tube with
scafolding
2x3x2+2x18x3=120 nos
Qty taken for cost of using once=
120x0.85/40=2.55 nos

each

2.55

55.00

7398

Challies
3 nos x 18 |ines=54 nos
Two level plate challies=2x18 lines=36
nos
Tota|=90 nos
Qty taken for cost of using
once=90x0.85!40=1.9125 nos

Nos

1.91

800.00

7399

Cup Locks
For Vertical standards=
(5x7x2x9=630 nos)
+(2x18x19=694 nos)
Tota|=1314 nos
Qty taken for cost of using once=
1314x0.85/40=27.92

Nos

27.92

75.00

2205

Carraige of Steel
40mm dia MS pipe=3765.42kg
25mm spigot=123.98kg
Nuts & bo|ts=37.80kg
clamp=120 [email protected] each=120.00kg
ChaIlies=90 nos @ 15.00kg each=1350.00kg
Cup locks=1314 nos @ 0.50kg each=
657.00kg
TotaI=6054.20kg=6.054 tonne

tonne

6.054

77.87

0116

Fitter (grade 1)
LABOUR:
Beldar

Day

15.50

301.00

Day

31.00

247.00

0114

DSR-12

Page 1110 of 2298

9999

Sundries

L.S.

1035.00

Add water charges @ 1% on

1.49
Total:
22154.83

Add C.P & OH @15% on

22376.38
Cost for 202.50 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 127.08
Rs 127.10

Item Code: 25.3

Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth
etc.
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
7767
Stone cleaning chemical approved by ASI
Ltr
0.10
164.01
1 kg teepal of 3% solution for 10 sqm area
7771

0103
0114
0128
9999

6501
0103
0114
0128

Liquid Amonia 5%
LABOUR:
For applying the chemical solution
Blacksmith 2nd class
Beldar
Mate
(a)Cleaning
T & P & its manitinance cost
(Jet Pump, electrice cable, horse pipe, waler
River Sand
Labour (for pressure cleaning)
Blacksmith 2nd class
Beldar
Mate

Ltr

0.17

160.80

Day
Day
Day

0.20
0.20
0.10

273.00
247.00
260.00

L.S.
cum

1.00
0.0283

1.49
500.00

Day
Day
Day

0.40
0.80
0.10

273.00
247.00
260.00
Total:
522.18

Add water charges @ 1% on

Add C.P & OH @15% on

527.40
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 60.65
Rs 62.70

Item Code: 25.4

Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and
manufacturer ..
Details of Cost for : 10.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
7775
Sodium pentachlorophenate
Kg
0.10
630.00
LABOUR:
0103
Blacksmith 2nd class
Day
0.25
273.00
0114
Beldar
Day
0.25
247.00
0128
Mate
Day
0.125
260.00
Total:
Add water charges @ 1% on
225.50
Add C.P & OH @15% on
227.76
Cost for 10.00 Sqm

DSR-12

Page 1111 of 2298

Rate per One Sqm:

Rate as per DSR-12:

Rs 26.19
Rs 26.80

Item Code: 25.5

Ruled / Flush pointing on Red sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One
lime: 1.5 surkhi (50% red and 50% light yellow surkhi ):1/2 marble dust}

Code
03.019
0155
0115
0101
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description

MATERIALS:
Mortar in lime , surkhi ( 50% red and 50% light yellow) and Cum
marble dust 1:1.5:0.5
Mason (average)
Day
LABOUR:
Coolie
Day
Bhisti
Day
Sundries
L.S.

Rate

0.023

2004.22

0.92

287.00

1.37
0.93
4.03

247.00
260.00
1.49
Total:
896.33

Add water charges @ 1% on

Add C.P & OH @15% on

905.29
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 104.11
Rs 104.30

Item Code: 25.6

Ruled/ Flush pointing on White sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One
lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2 marble dust}

Code
03.019

0155
0115
0101
9999

Details of Cost for : 10.00 Sqm

Unit
Quantity

Description

MATERIALS:
Mortar in lime , surkhi ( 50% red and 50% light yellow) and Cum
marble dust 1:1.5:0.5
LABOUR:
Mason (average)
Day
Coolie
Day
Bhisti
Day
Sundries
L.S.

Rate

0.023

2004.22

0.92
1.37
0.93
4.03

287.00
247.00
260.00
1.49
Total:
896.33

Add water charges @ 1% on

Add C.P & OH @15% on

905.29
Cost for 10.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 104.11
Rs 104.30

Item Code: 25.7

Applying two or more coat of Ethyl Silicate chemical as approved by Archaeological Survey of India/ Engineer-in-charge ..

Code
7769

DSR-12

Description
MATERIALS:
Stone surface strengthening chemical approved by ASI

Details of Cost for : 5.00 Sqm

Unit
Quantity
Ltr

1.00

Rate
1017.17

Page 1112 of 2298

0131
0114
9999

LABOUR:
Painter
Beldar
Sundries

Day
Day
L.S.

0.15
0.15
6.00

Add water charges @ 1% on

273.00
247.00
1.49
Total:
1104.11

Add C.P & OH @15% on

1115.15
Cost for 5.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

Rs 256.48
Rs 267.00

Item Code: 25.8

Applying breathable, non-reactive, antifungal, and water repellant Silane/ Siloxane chemical as approved by Archaeological Survey
of India/ Engineer-in-charge ..
Details of Cost for : 45.00 Sqm
Code
Description
Unit
Quantity
Rate
MATERIALS:
7768
Water repallent chemical approved by ASI
Ltr
1.00
1586.25
7770
Turpentine oil
Ltr
12.00
67.50
LABOUR:
0131
Painter
Day
1.00
273.00
0114
Beldar
Day
1.00
247.00
9999
Handling / transportation charges
L.S.
6.00
1.49
Total:
Add water charges @ 1% on
2925.19
Add C.P & OH @15% on
2954.44
Cost for 45.00 Sqm
Rate per One Sqm:
Rate as per DSR-12:

DSR-12

Rs 75.50
Rs 69.70

Page 1113 of 2298

RMULAS)
SR-2012 and DAR-2012
compare both the rates.

ed rate is tallied with that of DAR-2012.

hat of DAR-2012 because, in DAR every

p. But both the rates are very close.

ntioned in the item it self.

he post from internet.

are welcome! Please do mail me on

y enthusiasm to work more.

DSR-12

Page 1114 of 2298

012

Amount

456.00
3.72
806.40
21.02
42.05
63.07

222.30
117.00
40.10
20.14
1791.80

Amount

498.75
903.00
240.00

222.30
117.00
15.42
7.75
2004.22

Amount

1550.00
24.14
1198.40
93.73

DSR-12

Page 1115 of 2298

185.25
18.20
40.10
20.14
3129.96

Amount

3400.00
52.95
1064.00
83.22

185.25
18.20
40.10
20.14
4863.86

Amount
500.00
87.60
22.23
27.17
637.00

Amount
247.50
34.62
31.40
28.60
205.01
18.03
123.41
147.42

DSR-12

Page 1116 of 2298

182.00
133.38
210.60
18.03
1380.00

Amount

3091.20

2545.75

254.58

608.58
11.52
6511.63

Amount

716.72

DSR-12

Page 1117 of 2298

672.00
220.50
74.46
160.55
148.20
70.20
15.05
13.65
10.40
40.10
20.14
80.19
2242.16

Amount

172.98
0.32

780.78
706.42
1415.31
3075.81

DSR-12

Page 1118 of 2298

Amount
2520.00

180740.16
5579.10

2041.20

6600.00

72000.00

98550.00
368030.46

Amount

1250.00
19.47
684.80
93.73

185.25
18.20
40.10
20.14
2311.69

DSR-12

Page 1119 of 2298

Amount

2550.00
39.71
684.80
93.73

185.25
18.20
40.10
20.14
3631.93

Amount

1900.00
29.59
684.80
93.73

185.25
18.20
40.10
20.14
2971.81

Amount
3400.00
52.95
608.00
83.22
185.25
18.20
40.10
20.14
4407.86

DSR-12

Page 1120 of 2298

Amount

6120.00
39.71
185.25
1070.00
18.20
93.73
60.24

7587.13

Amount
3400.00
52.95
18.20
878.75
40.10
83.22
20.14
185.25
4678.61

Amount

1250.00
19.47
1198.40
93.73

185.25
18.20
40.10
20.14

DSR-12

Page 1121 of 2298

2825.29

Amount

3750.00

0.50

245.13
3995.63

Amount

1900.00
29.59
1198.40
93.73

185.25
18.20
40.10
20.14
3485.41

DSR-12

Page 1122 of 2298

Amount

2550.00
39.71
1198.40
93.73

185.25
18.20
40.10
20.14
4145.53

Amount

54.00
155.61
81.90
9.61
301.12

Amount

8160.00
52.95
950.00
83.22

185.25
18.20
40.10
20.14
9509.86

Amount
1380.00

DSR-12

Page 1123 of 2298

138.00
1518.00

Amount
6511.63
651.16
-3255.82
3906.97

Amount
368030.46
36803.05
-92007.62
312825.89

Amount
97.67
97.67

DSR-12

Page 1124 of 2298

th CP & OH (15%)

Amount
1778.40
1482.00
3260.40
32.60
3293.00
493.95
3786.95

h, .. .., lead upto 50 m and lift upto 1.5 m :

Amount

1457.30
889.20
104.00
1.98
12.00
5.95
0.01
4.07
2474.51
24.75
2499.26
374.89
2874.15

Amount
543.40
889.20
104.00

12.00
1.98
5.95
0.01
4.07

DSR-12

Page 1125 of 2298

1560.61
15.61
1576.22
236.43
1812.65

Amount
1.98
12.00
5.95
0.01
2.71
22.65
0.23
22.88
3.43
26.31

Amount
104.00
104.00
1.04
105.04
15.76
120.80

All kinds of soil

Amount

309.38
206.25
104.00
494.00
1113.63

DSR-12

Page 1126 of 2298

11.14
1124.77
168.72
1293.49

Ordinary rock
Amount
468.75
106.25
174.14
392.73
87.69
123.50
333.45
16.08
1702.59
17.03
1719.62
257.94
1977.56

(requiring blasting)

Amount
937.50
212.50
261.82
697.78
218.60
111.15
333.45
137.55
60.00
24.02
2994.37
29.94
3024.31
453.65
3477.96

asting prohibited)

DSR-12

Page 1127 of 2298

Amount
937.50
212.50
610.09
1482.00
275.60
47.78
185.25
444.60
24.02
4219.34
42.19
4261.53
639.23
4900.76

Amount
309.38
206.25
104.00
506.35
1125.98
11.26
1137.24
170.59
1307.83

Amount
468.75
106.25
218.60
435.96
130.91
123.50
321.10
20.14
1825.21
18.25
1843.46
276.52
2119.98

DSR-12

Page 1128 of 2298

Amount
937.50
212.50
306.28
741.00
261.82
123.50
321.10
224.70
105.00
28.09
3261.49
32.61
3294.10
494.12
3788.22

Amount
937.50
212.50
654.55
1525.23
275.60
47.78
185.25
370.50
26.73
4235.64
42.36
4278.00
641.70
4919.70

ng 80 mm dia.

DSR-12

Page 1129 of 2298

Amount

11122.84 A
7127.19 B
18250.03
0.00
18250.03
0.00
18250.03

0 mm dia upto 300mm

Amount

11101.91 A
7113.78 B
18215.69
0.00
18215.69
0.00
18215.69

Amount

DSR-12

Page 1130 of 2298

9454.09 A
6057.90 B
15511.99
0.00
15511.99
0.00
15511.99

g 80 mm dia.
Amount

18030.60 A
7127.19 B
494.00
25651.79
4.94
25656.73
74.84
25731.57

mm dia not exceeding 300mm

Amount

19843.20 A
7843.68 B
543.40
28230.28
5.43

DSR-12

Page 1131 of 2298

28235.71
82.32
28318.03

Amount

8564.59 A
3385.44 B
232.18
12182.21
2.32
12184.53
35.18
12219.71

Amount

32218.64 A

7127.19 B
617.50
39963.33
6.18
39969.51
93.55
40063.06

DSR-12

Page 1132 of 2298

Amount

35457.55 A

7843.68 B
679.25
43980.48
6.79
43987.27
102.91
44090.18

Amount

15303.95 A

3385.44 B
288.99
18978.38
2.89
18981.27
43.78
19025.05

Amount

DSR-12

Page 1133 of 2298

41842.05 A

7127.19 B
617.50
49586.74
6.18
49592.92
93.55
49686.47

Amount

46048.39 A

7843.68 B
679.25
54571.32
6.79
54578.11
102.91
54681.02

Amount

19875.10 A

3385.44 B
288.99
23549.53
2.89
23552.42
43.78

DSR-12

Page 1134 of 2298

23596.20

Amount

5343.75

1875.00

117.94

131.39
136.50
247.00
40.10
7891.68
78.92
7970.60
1195.59
9166.19

Amount

5343.75

1875.00

DSR-12

Page 1135 of 2298

117.94

131.39
204.75
494.00
60.24
8227.07
82.27
8309.34
1246.40
9555.74

Amount

5343.75

1875.00

117.94

131.39
409.50
988.00
120.29
8985.87
89.86
9075.73

DSR-12

Page 1136 of 2298

1361.36
10437.09

Amount

392.00

128.00

15.24

10.36

16.38
29.64
4.07
595.69
5.96
601.65
90.25
691.90

Amount

DSR-12

Page 1137 of 2298

392.25

128.25

15.24

10.36

32.76
61.75
8.14
648.75
6.49
655.24
98.29
753.53

Amount

392.25

128.00

15.24

DSR-12

Page 1138 of 2298

10.36

51.87
93.86
12.01
703.59
7.04
710.63
106.59
817.22

Amount

2672.00

468.75

58.83

58.16

68.25
123.50
46.88
3496.37
34.96
3531.33
529.70
4061.03

DSR-12

Page 1139 of 2298

Amount

2672.00

468.75

58.83

58.16

136.50
247.00
50.75
3691.99
36.92
3728.91
559.34
4288.25

Amount

2672.00

468.75

58.83

58.16

DSR-12

Page 1140 of 2298

204.75
370.50
70.89
3903.88
39.04
3942.92
591.44
4534.36

Amount

74812.50
26250.00

1651.31

267.79
102981.60
1029.82
104011.42
15601.71
119613.13

ng 1.5 m
Amount

1781.25

1875.00

DSR-12

Page 1141 of 2298

117.66

74.08
68.25
123.50
29.44
4069.18
40.69
4109.87
616.48
4726.35

.5 m but not exceeding 3 m

Amount

1781.25

1875.00

117.66

DSR-12

Page 1142 of 2298

74.08
136.50
247.00
49.39
4280.88
42.81
4323.69
648.55
4972.24

m but not exceeding 4.5 m

Amount

1781.25

1875.00

117.66

74.08
273.00
432.25
69.54
4622.78
46.23
4669.01

DSR-12

Page 1143 of 2298

700.35
5369.36

utting and shoring complete. - Depth not

Amount

134.50

75.00

14.80

5.31
8.19
14.82
2.71
255.33
2.55
257.88
38.68
296.56

g and shoring complete. - Depth exceeding

DSR-12

Page 1144 of 2298

Amount

134.50

75.00

14.80

5.31
16.38
29.64
4.07
279.70
2.80
282.50
42.38
324.88

g and shoring complete. - Depth exceeding

Amount

134.50

DSR-12

Page 1145 of 2298

75.00

14.80

5.31
27.30
49.40
5.42
311.73
3.12
314.85
47.23
362.08

ing 1.5 m
Amount

890.75

138.75

32.79

DSR-12

Page 1146 of 2298

32.76
61.75
29.44
1186.24
11.86
1198.10
179.72
1377.82

1.5 m but not exceeding 3 m

Amount

890.75

138.75

32.79
68.25
123.50
49.39
1303.43
13.03
1316.46
197.47
1513.93

m but not exceeding 4.5 m

Amount

DSR-12

Page 1147 of 2298

890.75

138.75

32.79
136.50
217.36
70.89
1487.04
14.87
1501.91
225.29
1727.20

sition.
Amount

24937.50

26250.00

1651.31

DSR-12

Page 1148 of 2298

148.66
52987.47
529.87
53517.34
8027.60
61544.94

Amount
52.00
617.50
52.00
721.50
7.22
728.72
109.31
838.03

Amount
26.00
271.70
297.70
2.98
300.68
45.10
345.78

DSR-12

Page 1149 of 2298

Amount
52.00
481.65
533.65
5.34
538.99
80.85
619.84

Amount
5000.00
876.00
219.83
264.29
91.00
6451.12
64.51
6515.63
977.34
7492.97

eding 15 cm deep and disposal of rubbish,

Amount
486.59
318.63
805.22
8.05
813.27
121.99
935.26

inds of soil
Amount
679.25

DSR-12

Page 1150 of 2298

130.00
809.25
8.09
817.34
122.60
939.94

n layers -All kinds of soil.

Amount

392.34 A
20.14
412.48
0.20
412.68
3.05
415.73

n layers Ordinary Rock

Amount

636.00 A
20.14
656.14
0.20
656.34
3.05
659.39

n layers - Hard rock (Requiring blasting)

Amount

DSR-12

Page 1151 of 2298

1136.46 A
20.14
1156.60
0.20
1156.80
3.05
1159.85

n layers - Hard rock blasting prohibited

Amount

1475.91 A
20.14
1496.05
0.20
1496.25
3.05
1499.30

val of rubbish..
Amount
266.76
148.20
414.96
4.15
419.11
62.87
481.98

of the area cleared.

Amount
148.20
61.75
2.71
212.66

DSR-12

Page 1152 of 2298

2.13
214.79
32.22
247.01

tting of trunks and branches removing the

30 cm girth up to and including .

Amount

81.51
41.99
4.07
127.57
1.28
128.85
19.33
148.18

tting of trunks and branches removing the

60 cm girth upto and including ..

Amount

370.50
185.25
8.14
563.89
5.64
569.53
85.43
654.96

DSR-12

Page 1153 of 2298

tting of trunks and branches removing the

120 cm girth upto and including 2

Amount

1729.00
864.50
12.01
2605.51
26.06
2631.57
394.74
3026.31

Amount

3458.00
1729.00
40.10
5227.10
52.27
5279.37
791.91
6071.28

DSR-12

Page 1154 of 2298

yriphos/ Lindane emulsifiable concentrate

Amount
16000.00
8.76
16008.76
160.09
16168.85
2425.33
18594.18

treatment - Along external wall - With

Amount

81.51

20.14
101.65
1.02
102.67
15.40
118.07

eatment - Along the external wall below

Amount

98.80
53.46
152.26
1.52
153.78
23.07
176.85

DSR-12

Page 1155 of 2298

tment - Treatment of soil under existing

Amount

494.00
136.50
53.46
683.96
6.84
690.80
103.62
794.42

ent - Treatment of existing masonry - With

Amount

74.10

13.65
26.73
114.48
1.14
115.62
17.34
132.96

DSR-12

Page 1156 of 2298

ment - Treatment at points of contact of

Amount

969.00
54.60
49.40
26.73
1099.73
11.00
1110.73
166.61
1277.34

Amount
-20.80
-197.60
-218.40
-2.18
-220.58
-33.09
-253.67

nloading & stacking up to any lead

Amount

7.75
87.60
95.35
0.95
96.30
14.45
110.75

DSR-12

Page 1157 of 2298

rs (each layer should not exceed 15 cm),

Amount

52.00
617.50
52.00
721.50
7.22
728.72
109.31
838.03

Amount
672.00
220.50
74.46
476.00
37.23
3050.00
47.50
28.70
402.61
182.00
56.00
21.00
21.31
5289.31
52.89
5342.20
801.33
6143.53

aggregate.. ..
Amount
598.50
294.00

DSR-12

Page 1158 of 2298

74.46
476.00
37.23
2000.00
31.15
28.70
402.61
182.00
56.00
21.00
21.31
4222.96
42.23
4265.19
639.78
4904.97

ggregate.. ..
Amount
703.50
231.00
77.96
498.40
38.98
1600.00
24.92
28.70
402.61
182.00
56.00
21.00
21.31
3886.38
38.86
3925.24
588.79
4514.03

ggregate.. ..
Amount
494.00
231.00
115.50

DSR-12

Page 1159 of 2298

49.51
28.91
498.40
38.98
1600.00
24.92
28.70
402.61
182.00
56.00
21.00
20.14
3791.67
37.92
3829.59
574.44
4404.03

ggregate.. ..
Amount
735.00
252.00
82.34
526.40
41.17
1100.00
17.13
28.70
402.61
182.00
56.00
21.00
20.14
3464.49
34.64
3499.13
524.87
4024.00

ggregate.. ..
Amount
617.50
252.00

DSR-12

Page 1160 of 2298

61.89
21.02
526.40
41.17
1100.00
17.13
28.70
402.61
182.00
56.00
21.00
20.14
3347.56
33.48
3381.04
507.16
3888.20

regate.. ..
Amount
617.50
252.00
61.89
21.02
300.80
41.17
1100.00
17.13
28.70
402.61
182.00
56.00
21.00
20.14
3121.96
31.22
3153.18
472.98
3626.16

ggregate.. ..
Amount

DSR-12

Page 1161 of 2298

617.50
252.00
61.89
21.02
526.40
41.17
850.00
13.24
28.70
402.61
182.00
56.00
21.00
20.14
3093.67
30.94
3124.61
468.69
3593.30

Amount
617.50
252.00
61.89
21.02
300.80
41.17
850.00
13.24
28.70
402.61
182.00
56.00
21.00
20.14
2868.07
28.68
2896.75
434.51
3331.26

aggregate.. ..

DSR-12

Page 1162 of 2298

Amount
617.50
252.00
61.89
21.02
526.40
41.17
650.00
10.12
28.70
402.61
182.00
56.00
21.00
20.14
2890.55
28.91
2919.46
437.92
3357.38

gregate.. ..
Amount
617.50
252.00
61.89
21.02
300.80
41.17
650.00
10.12
28.70
402.61
182.00
56.00
21.00
13.37
2658.18
26.58
2684.76
402.71
3087.47

DSR-12

Page 1163 of 2298

Amount
617.50
252.00
61.89
21.02
414.40
32.41
1.63
18.40
850.00
13.24
28.70
402.61
182.00
56.00
21.00
21.31
2994.11
29.94
3024.05
453.61
3477.66

Amount
617.50
252.00
61.89
21.02
380.80
29.78
1.63
18.40
650.00
10.12
28.70
402.61
182.00
56.00
21.00
21.31
2754.76
27.55
2782.31
417.35
3199.66

DSR-12

Page 1164 of 2298

five level excluding centering, shuttering

Amount
672.00
220.50
74.46
476.00
37.23
3050.00
47.50
222.30
192.66
182.00
18.06
16.38
56.00
21.00
170.46
21.31
464.36
5942.22
59.42
6001.64
900.25
6901.89

ering, shuttering finishing : 1:1:3 (Coarse

Amount
598.50
294.00
74.46
476.00
37.23
2000.00
31.15
222.30
192.66
182.00
18.06
16.38

DSR-12

Page 1165 of 2298

56.00
21.00
170.46
21.31
464.36
4875.87
48.76
4924.63
738.69
5663.32

2:4 (Coarse sand - stone aggregate 20mm)

Amount
703.50
231.00
77.96
498.40
38.98
1600.00
24.92
222.30
192.66
182.00
18.06
16.38
56.00
21.00
170.46
21.31
464.36
4539.29
45.39
4584.68
687.70
5272.38

five level excluding centering, shuttering

Amount
494.00

DSR-12

Page 1166 of 2298

231.00
115.50
49.51
28.91
498.40
38.98
1600.00
24.92
222.30
192.66
182.00
18.06
16.38
56.00
21.00
170.46
20.14
464.36
4444.58
44.45
4489.03
673.35
5162.38

five level excluding centering, shuttering

Amount
735.00
252.00
82.34
526.40
41.17
1100.00
17.13
222.30
192.66
182.00
18.06
16.38
56.00
21.00
170.46
20.14
464.36
4117.40
41.17

DSR-12

Page 1167 of 2298

4158.57
623.79
4782.36

tone agg. with coarse sand.

Amount
617.50
252.00
61.89
21.02
526.40
41.17
1100.00
17.13
222.30
192.66
182.00
18.06
16.38
56.00
21.00
170.46
20.14
464.36
4000.47
40.00
4040.47
606.07
4646.54

tone agg. with fine sand.

Amount
617.50
252.00
61.89
21.02
300.80
41.17
1100.00

DSR-12

Page 1168 of 2298

17.13
222.30
192.66
182.00
18.06
16.38
56.00
21.00
170.46
20.14
464.36
3774.87
37.75
3812.62
571.89
4384.51

stone agg. with fine sand.

Amount
617.50
252.00
61.89
21.02
526.40
41.17
650.00
10.12
222.30
192.66
182.00
30.10
56.00
21.00
170.46
21.31
464.36
3540.29
35.40
3575.69
536.35
4112.04

DSR-12

Page 1169 of 2298

Amount

357.00
25.50
197.20
32.98
13.09
64.26
32.93
116.22
225.75
370.50
77.48
38.74
1551.65
15.52
1567.17
235.08
1802.25

Amount

535.50
197.20
49.47

DSR-12

Page 1170 of 2298

19.64
190.40
41.15
116.22
1053.50
1482.00
116.22
77.48
3878.78
38.79
3917.57
587.64
4505.21

Amount

176.80
28.90
129.69
70.55
41.15
77.48
301.00
494.00
58.11
38.74
1416.42
14.16
1430.58
214.59
1645.17

DSR-12

Page 1171 of 2298

Amount

27084.18 A

27084.18
0.00
27084.18
0.00
27084.18

Amount

24144.00 A

24144.00
0.00
24144.00
0.00
24144.00

ates, anchor blocks, plain window sills,

Amount

2207.24 A

125.97

DSR-12

Page 1172 of 2298

12.58 B

45.59 C

11.81 D
54.09
2457.28
1.80
2459.08
27.28
2486.36

ates, anchor blocks, plain window sills,

Amount

2031.31 A

DSR-12

Page 1173 of 2298

12.58 B

125.97

45.59 C

11.81 D
54.09
2281.35
1.80
2283.15
27.28
2310.43

ates, anchor blocks, plain window sills,

Amount

1810.80 A

DSR-12

Page 1174 of 2298

12.58 B

125.97

45.59 C

11.81 D
54.09
2060.84
1.80
2062.64
27.28
2089.92

Amount

0.00 A
2708.42 B

7.64 C

DSR-12

Page 1175 of 2298

45.59 D

11.81 E

45.50
2818.96
0.46
2819.42
6.89
2826.31

: 1 : 2 : 4 - 20 mm stone agg. with coarse

Amount

2708.42 A

7.64 B

DSR-12

Page 1176 of 2298

45.59 C

11.81 D

211.42

167.96
180.60
889.20
4222.64
14.49
4237.13
219.55
4456.68

: 1 : 3 : 6 - 20 mm stone agg. with coarse

Amount

2414.40 A
211.42

7.64 B

DSR-12

Page 1177 of 2298

45.59 C

11.81 D

167.96
180.60
889.20
3928.62
14.49
3943.11
219.55
4162.66

3. 1 : 2 : 4 - 20 mm stone agg. with coarse

Amount

103.82 A

40.10

13.83
15.05
74.10
9.73
256.63
1.53
258.16
23.15
281.31

DSR-12

Page 1178 of 2298

3. 1 : 2 : 4 - 20 mm stone agg. with coarse

Amount

92.55 A

40.10

13.83
15.05
74.10
9.73
245.36
1.53
246.89
23.15
270.04

50 mm ,300mm long in the Bollard and MS

Amount

32.93 A

40.05 B

220.43 C

3.92 D

DSR-12

Page 1179 of 2298

120.72 E

25.26 F

19.37
462.68
0.19
462.87
2.93
465.80

m size.
Amount

1805.61 A

283.50
-283.50
120.40
109.20
2.91
2038.12
2.33
2040.45
35.23
2075.68

size.
Amount

2257.02 A

120.40
109.20
20.14
2506.76
2.50

DSR-12

Page 1180 of 2298

2509.26
37.84
2547.10

Amount
25.00

5.42
30.42
0.30
30.72
4.61
35.33

rse .. ..
Amount
629.00
36.90
14.00
1.49

29.64
17.29

54.60
49.39
832.31
8.32
840.63
126.09
966.72

Amount

DSR-12

Page 1181 of 2298

370.50
370.50
3.71
374.21
56.13
430.34

Amount

187.50
988.00
1175.50
11.76
1187.26
178.09
1365.35

Amount
6.02
5.46
61.75
37.05
110.28
1.10
111.38
16.71
128.09

over 75mm bed by dry brick ballast 40mm.

Amount
375.00
71.42

DSR-12

Page 1182 of 2298

38.40
5.26

39.52
27.17

367.50
126.00
41.17
257.60
20.15
550.00
8.57
247.00
15.05
85.80
19.95
10.07
77.49
266.76
266.76
2916.64
29.17
2945.81
441.87
3387.68

g /water retaining structures etc.,

Amount
45.63
45.63
0.46
46.09
6.91
53.00

ated plant including pumping of RMC and

Amount

DSR-12

Page 1183 of 2298

617.50
252.00
61.89
21.02
414.40
32.41
1.63
18.40
1200.00
18.69
43.80

350.00
300.00
130.00

48.79
494.00
234.00
21.00
19.37
4278.90
42.79
4321.69
648.25
4969.94

ated plant including pumping of RMC and

Amount
617.50
252.00
61.89
21.02
414.40
32.41
1.63
18.40
1100.00
17.13
40.15

350.00
300.00

DSR-12

Page 1184 of 2298

130.00

48.79
494.00
234.00
21.00
19.37
4173.69
41.74
4215.43
632.31
4847.74

ated plant including pumping of RMC and

Amount
617.50
252.00
61.89
21.02
414.40
32.41
1.63
18.40
1200.00
18.69
43.80

350.00
300.00

48.79
494.00
234.00
21.00
19.37

464.36
4613.26
46.13
4659.39
698.91
5358.30

DSR-12

Page 1185 of 2298

ated plant including pumping of RMC and

Amount
617.50
252.00
61.89
21.02
414.40
32.41
1.63
18.40
1100.00
17.13
40.15

350.00
300.00

48.79
494.00
234.00
21.00
19.37

464.36
4508.05
45.08
4553.13
682.97
5236.10

ng of RMC and admixtures - All work upto

Amount
617.50
252.00
61.89
21.02
526.40

DSR-12

Page 1186 of 2298

41.17
1200.00
18.69
43.80

350.00
300.00
130.00

48.79
494.00
234.00
21.00
19.37
4379.63
43.80
4423.43
663.51
5086.94

ng of RMC and admixtures - All work upto

Amount
617.50
252.00
61.89
21.02
526.40
41.17
1100.00
17.13
40.15

350.00
300.00
130.00

48.79
494.00
234.00
21.00
19.37
4274.42
42.74
4317.16

DSR-12

Page 1187 of 2298

647.57
4964.73

g of RMC and admixtures - All work above

Amount
617.50
252.00
61.89
21.02
526.40
41.17
1200.00
18.69
43.80

350.00
300.00

48.79
494.00
234.00
21.00
19.37

464.36
4713.99
47.14
4761.13
714.17
5475.30

g of RMC and admixtures - All work above

Amount
617.50
252.00
61.89
21.02

DSR-12

Page 1188 of 2298

526.40
41.17
1100.00
17.13
40.15

350.00
300.00

48.79
494.00
234.00
21.00
19.37

464.36
4608.78
46.09
4654.87
698.23
5353.10

All work up to plinth level : 1:1:2 -coarse

Amount
672.00
220.50
74.46
476.00
37.23
3050.00
47.50
48.79
494.00
234.00
56.00
21.00
21.31
5452.79
54.53
5507.32
826.10
6333.42

DSR-12

Page 1189 of 2298

All work up to plinth level : 1:1.5:3 -coarse

Amount
598.50
294.00
74.46
476.00
37.23
2000.00
31.15
48.79
494.00
234.00
56.00
21.00
21.31
4386.44
43.86
4430.30
664.55
5094.85

All work up to plinth level : 1:2:4 -coarse

Amount
703.50
231.00
77.96
498.40
38.98
1600.00
24.92
48.79
494.00
234.00
56.00
21.00
21.31
4049.86
40.50
4090.36
613.55
4703.91

DSR-12

Page 1190 of 2298

st of centering, shuttering, finishing and

Amount
6168.96
2024.19
683.54
4369.68
341.77
27999.00
436.06
2788.63
1859.91
2147.60
276.92
251.16
512.00
192.00
196.41
625.84
4248.40
55122.07
551.22
55673.29
8350.99
64024.28

st of centering, shuttering, finishing and

Amount
5494.23
2698.92
683.54
4369.68
341.77
18360.00
285.94
2788.63
1859.91
2147.60
276.92
251.16
512.00
192.00
196.41
625.84

DSR-12

Page 1191 of 2298

4248.40
45332.95
453.33
45786.28
6867.94
52654.22

st of centering, shuttering, finishing and

Amount
6458.13
2120.58
715.71
4575.31
357.85
14688.00
228.75
2788.63
1859.91
2147.60
276.92
251.16
196.41
625.84
512.00
192.00
4248.40
42243.20
422.43
42665.63
6399.84
49065.47

uttering, finishing, reinforcement -1:2:4 -2

Amount
703.50
231.00
77.96
498.40
38.98
1600.00
24.92

DSR-12

Page 1192 of 2298

68.88
679.25
234.00
64.00
24.00
21.31
464.36
4730.56
47.31
4777.87
716.68
5494.55

reinforcement with 1:2:4 - coarse sand -20

Amount
4514.03 A

24.70
52.00
12.04
10.92
10.40
464.36
5088.45
5.74
5094.19
87.02
5181.21

Amount
18804.56
6174.63
2083.98
13322.18
1041.98
42768.00
666.07
1842.54
18156.97

DSR-12

Page 1193 of 2298

6255.60
1712.00
642.00
598.82
1505.00
1365.00
390.00
1111.50
12379.64
130820.47
1308.20
132128.67
19819.30
151947.97

Amount

5344.82 A

64.22
5409.04
0.64
5409.68
9.73
5419.41

Amount

4514.03 A

19.76
4533.79
0.20
4533.99
2.99
4536.98

DSR-12

Page 1194 of 2298

uttering, finishing and reinforcement with

Amount
395.01
194.04
49.14
314.16
24.57
1320.00
20.56
195.13
138.32
156.00
18.06
16.38
44.94
14.14
40.00
15.00
44.46

15.05
13.65
24.70
39.00
3092.31
30.92
3123.23
468.48
3591.71

columns, etc. for mass concrete.

Amount

357.00

25.50

DSR-12

Page 1195 of 2298

197.20

32.98

13.09

64.26

32.93
116.22
225.75
370.50
77.48
38.74
1551.65
15.52
1567.17
235.08
1802.25

ters, butteresses, plinth and string courses

Amount

535.50
197.20
49.47
19.64

190.40

41.15
116.22

DSR-12

Page 1196 of 2298

1053.50
1482.00
116.22
77.48
3878.78
38.79
3917.57
587.64
4505.21

gs, balconies and access platform

Amount

551.41 A
194.00
146.63
32.93
193.70
903.00
1482.00
116.22
74.05
3693.94
31.43
3725.37
476.09
4201.46

DSR-12

Page 1197 of 2298

Amount

551.41 A
194.00
146.63
32.93
193.70
903.00
1482.00
116.22
74.05
3693.94
31.43
3725.37
476.09
4201.46

rders, bressumers and cantilevers.

Amount

DSR-12

Page 1198 of 2298

385.49 A
146.63
44.86
32.93
116.22
376.25
617.50
58.11
36.34
1814.33
14.29
1828.62
216.47
2045.09

nts, Posts and Struts.

Amount

176.80
28.90

129.69

DSR-12

Page 1199 of 2298

70.55

41.15
77.48
301.00
494.00
58.11
38.74
1416.42
14.16
1430.58
214.59
1645.17

pt spiral-staircases.

Amount

722.00

121.75

29.60

4.37

DSR-12

Page 1200 of 2298

477.75
247.00
24.02
1626.49
16.26
1642.75
246.41
1889.16

Amount

367.07 A

918.15 B

541.62 C
1826.84
0.00
1826.84
0.00
1826.84

Amount

DSR-12

Page 1201 of 2298

6406.25

466.20
688.75

41.17
1.13
4368.00
3211.00
17.43
15199.93
152.00
15351.93
2302.79
17654.72

pan
Amount

22197.50

DSR-12

Page 1202 of 2298

88.89

346.81

432.00

1.31

7644.00
5928.00
200.48

-28869.78 A
7969.21
368.39
8337.60
5581.11
13918.71

Amount

535.50
197.20
49.47
19.64
190.40
41.17

116.22
1053.50
1482.00

DSR-12

Page 1203 of 2298

116.22
77.48
3878.80
38.79
3917.59
587.64
4505.23

Amount
3995.63
665.95
4661.58
46.62
4708.20
706.23
5414.43

individually or forming box louvers band,

Amount

2981.25

840.75

DSR-12

Page 1204 of 2298

466.20

30.79

3003.00
2717.00
120.29
10159.28
101.59
10260.87
1539.13
11800.00

taken as 25.1)

s in cornices, window sills, string courses,

Amount

357.00

25.50
197.20
32.98
13.09
64.26

32.93

116.22
225.75
370.50

DSR-12

Page 1205 of 2298

77.48
38.74
1551.65
15.52
1567.17
235.08
1802.25

de
Amount

178.00

484.50

2.65

221.13
133.38
7.75
1027.41
10.27
1037.68
155.65
1193.33

ve 20 cm wide

DSR-12

Page 1206 of 2298

Amount

500.00

547.00

4.19

273.00
185.25
9.69
1519.13
15.19
1534.32
230.15
1764.47

Amount

568.75

681.25

DSR-12

Page 1207 of 2298

110.25

8.89
171.99
155.61
9.69
1706.43
17.06
1723.49
258.52
1982.01

s etc
Amount

334.50

DSR-12

Page 1208 of 2298

78.75

23.67

2.48
218.40
197.60
10.65
866.05
8.66
874.71
131.21
1005.92

s etc., including edges.

Amount

128.13

DSR-12

Page 1209 of 2298

37.50

19.30

1.34
81.90
61.75
7.75
337.67
3.38
341.05
51.16
392.21

y
Amount

1625.09 A
1141.65

194.00
146.63
18.82
193.70
903.00

DSR-12

Page 1210 of 2298

1482.00
116.22
77.48
5898.59
42.74
5941.33
647.44
6588.77

Amount

1172.84 A

657.90
146.63

44.86
16.46
116.22
376.25
617.50
58.11
38.74
3245.51
20.73

DSR-12

Page 1211 of 2298

3266.24
314.01
3580.25

Amount

912.00
768.00
864.00
19.37
38.74
2602.11
26.02
2628.13
394.22
3022.35

Amount

1200.00
768.00
864.00
19.37
38.74
2890.11
28.90
2919.01
437.85
3356.86

Amount

1488.00

DSR-12

Page 1212 of 2298

768.00
864.00
19.37
38.74
3178.11
31.78
3209.89
481.48
3691.37

Amount

1920.00
768.00
864.00
19.37
38.74
3610.11
36.10
3646.21
546.93
4193.14

every additional height of 1 metre or part

Amount

522.17
-513.25

DSR-12

Page 1213 of 2298

307.02

24.55
96.85
903.00
1482.00
193.70
3016.04
30.16
3046.20
456.93
3503.13

etc with 1:2:4

Amount
5134.29 A

24.70
52.00
12.04
10.92
10.40
5244.35
1.10
5245.45
16.67
5262.12

shing excluding reinforcement with 1:2:4 -

Amount
2847.09 A
1001.28 B
12.35
26.00
6.02
5.46

DSR-12

Page 1214 of 2298

5.20
3903.40
0.55
3903.95
8.34
3912.29

Amount
135.42 A

8.40
4.07
60.08 B
2.40

5.24
4.75
11.12
0.47
0.74
1.56
0.36
0.33
0.31
235.25
0.40
235.65
6.02
241.67

Amount

4468.89 A
1151.47 B
274.17

DSR-12

Page 1215 of 2298

24.45
51.48
11.92
10.81
10.30
133.65
400.96
6538.10
9.18
6547.28
139.04
6686.32

hing excluding reinforcement with 1:2:4 -

Amount
7312.73 A

2645.20 B

1802.30 C

444.60

395.20
83.20
18.06
16.38
15.60

658.58
2014.48
15406.33
36.46
15442.79
552.38
15995.17

with 1:2:4
Amount

DSR-12

Page 1216 of 2298

2979.26 A
427.21 B

185.25

16.30
34.32
7.95
7.21
6.86
26.73
106.92
26.73
3824.74
4.18
3828.92
63.37
3892.29

Amount

315.00
9.30
9.24
90.30
81.90
266.76
772.50
7.73
780.23
117.03
897.26

Amount

DSR-12

Page 1217 of 2298

135.00
5.42
5.42
36.12
32.76
123.50
338.22
3.38
341.60
51.24
392.84

Amount
54.38
2.71
2.71
18.06
16.38
61.75
155.99
1.56
157.55
23.63
181.18

Amount

1913.95 A

10.37
22.10
5.12
4.64

DSR-12

Page 1218 of 2298

4.42
1072.36 B

32.15
3065.11
0.79
3065.90
11.94
3077.84

Amount

55296.87 A

302.58
637.00
147.49
133.77
127.40
3670.66 B
60315.77
13.48
60329.25
204.26
60533.51

s etc
Amount

2835.00
20.14
20.14
75.25
61.75

DSR-12

Page 1219 of 2298

3012.28
30.12
3042.40
456.36
3498.76

nsile steel bars.

Amount

4252.50
8.18
38.74

301.00
247.00
40.10
4887.52
48.88
4936.40
740.46
5676.86

Amount

4410.00
8.18

301.00
247.00
40.10
5006.28
50.06
5056.34
758.45
5814.79

DSR-12

Page 1220 of 2298

Amount

4725.00
8.18
38.74

301.00
247.00
40.10
5360.02
53.60
5413.62
812.04
6225.66

Amount

4725.00
8.18
38.74

301.00
247.00
40.10
5360.02
53.60
5413.62
812.04
6225.66

DSR-12

Page 1221 of 2298

Amount

5825.64
8.18
38.74

54.60
370.50
20.14
6317.80
63.18
6380.98
957.15
7338.13

on complete. - Upto plinth level Thermo-

Amount

4725.00

38.74

301.00
247.00
40.10
5351.84
53.52
5405.36
810.80
6216.16

DSR-12

Page 1222 of 2298

Amount
261.50
146.37
185.25
239.20
19.95
17.43
869.70
8.70
878.40
131.76
1010.16

Amount
145.92
106.50
1.66
60.20
54.60
61.75
52.88
96.00
13.14
7.94
9.30
609.89
6.10
615.99
92.40
708.39

Amount

2851.20
68.25
9.30

DSR-12

Page 1223 of 2298

2928.75
29.29
2958.04
443.71
3401.75

Amount
45880.00

108.62
992.00

24.83
758.52
687.96
1990.82
180.53
50623.28
506.23
51129.51
7669.43
58798.94

Amount

11211.00
26.54
242.40
6.11
18.00
0.28
1008.00
78.84

DSR-12

Page 1224 of 2298

758.52
687.96
1990.82
180.53
16209.00
162.09
16371.09
2455.66
18826.75

Amount

2625.00
50.00

819.00
40.10
36.12
32.76
61.75
40.10
3704.83
37.05
3741.88
561.28
4303.16

wide.
Amount
85.54
0.38
60.05
54.60
49.40
249.97
2.50
252.47
37.87

DSR-12

Page 1225 of 2298

290.34

wide.
Amount
114.66
0.51
80.19
73.71
66.69
335.76
3.36
339.12
50.87
389.99

m wide.
Amount
228.00
1.80
1.55
18.29
16.55
2.71
268.90
2.69
271.59
40.74
312.33

m wide.
Amount
323.00
1.80
1.94

DSR-12

Page 1226 of 2298

24.30
21.98
3.49
376.51
3.77
380.28
57.04
437.32

Amount
150.50
136.50
247.00
40.10
574.10
5.74
579.84
86.98
666.82

Amount

187.50
988.00
1175.50
11.76
1187.26
178.09
1365.35

Amount

DSR-12

Page 1227 of 2298

6.02
5.46
61.75
37.05
110.28
1.10
111.38
16.71
128.09

ng pumping of concrete to site, including

Amount
598.50
294.00
74.46
476.00
37.23
1650.00
25.70
60.23

350.00
130.00

48.79
494.00
234.00
21.00
19.37
4513.28
45.13
4558.41
683.76
5242.17

ng pumping of concrete to site, including

Amount
598.50
294.00
74.46

DSR-12

Page 1228 of 2298

476.00
37.23
1650.00
25.70
60.23

350.00
130.00

48.79
494.00
234.00
21.00
19.37

464.36
4977.64
49.78
5027.42
754.11
5781.53

Amount

50.00
0.78

3.65
54.43
0.54
54.97
8.25
63.22

Amount

100.00

DSR-12

Page 1229 of 2298

1.56

7.30
108.86
1.09
109.95
16.49
126.44

Amount

150.00
2.34

8.58
160.92
1.61
162.53
24.38
186.91

Amount
500.00
7.79
507.79
5.08
512.87
76.93
589.80

Amount

DSR-12

Page 1230 of 2298

7915.34 A

7653.12 B

598.68 C

19.37
119.13

301.00
1482.00

1054.43 D
19143.07
19.22
19162.29
291.11
19453.40

plinth level
Amount
598.50
294.00
74.46
476.00
37.23
1650.00
25.70

DSR-12

Page 1231 of 2298

60.23

350.00
300.00
130.00

48.79
494.00
234.00
21.00
19.37
4813.28
48.13
4861.41
729.21
5590.62

above plinth level upto floor five level

Amount
598.50
294.00
74.46
476.00
37.23
1650.00
25.70
60.23

350.00
300.00
130.00

48.79
494.00
234.00
21.00
19.37

464.36
5277.64
52.78
5330.42
799.56
6129.98

DSR-12

Page 1232 of 2298

reof. _x000D_
Amount
130.00
130.00
1.30
131.30
19.70
151.00

d cement manufactured in fully automatic

Amount
617.50
252.00
61.89
21.02
414.40
32.41
1.63
18.40
1650.00
25.70
60.23

350.00
300.00
130.00

48.79
494.00
234.00
21.00
19.37
4752.34
47.52
4799.86
719.98
5519.84

DSR-12

Page 1233 of 2298

d cement manufactured in fully automatic

vel

Amount
617.50
252.00
61.89
21.02
414.40
32.41
1.63
18.40
1650.00
25.70
60.23

350.00
300.00
130.00

48.79
494.00
234.00
21.00
19.37

464.36
5216.70
52.17
5268.87
790.33
6059.20

ry surface. - Non pigmented wet curing

Amount
200.00

125.58
56.81
26.00
12.01

DSR-12

Page 1234 of 2298

185.25
119.20
724.85
7.25
732.10
109.82
841.92

face. - Pigmented wet curing compound

Amount

320.00

125.58
56.81
26.00
12.01
185.25
119.20
844.85
8.45
853.30
128.00
981.30

nforcement - Coupler for 16 mm diameter

Amount
67.50
5.62
26.48
99.60
1.00
100.60
15.09
115.69

DSR-12

Page 1235 of 2298

nforcement - Coupler for 20 mm diameter

Amount
87.75
8.79
37.50
134.04
1.34
135.38
20.31
155.69

nforcement - Coupler for 25 mm diameter

Amount
129.50
12.95
44.12
186.57
1.87
188.44
28.27
216.71

nforcement - Coupler for 28mm diameter

Amount
191.25
19.13
48.53
258.91
2.59
261.50
39.23
300.73

DSR-12

Page 1236 of 2298

nforcement - Coupler for 32 mm diameter

Amount
230.50
23.07
48.53
302.10
3.02
305.12
45.77
350.89

mm wide.
Amount
440.00
1.74
1.94
18.29
16.55
3.49
482.01
4.82
486.83
73.02
559.85

mm wide.
Amount
660.00
1.74
1.94
18.29
16.55
3.49
702.01
7.02
709.03
106.35
815.38

DSR-12

Page 1237 of 2298

nt : 4 coarse sand)

Amount
1432.60
871.35
115.40
4.07
108.36
98.28
338.39
52.00
3020.45
30.20
3050.65
457.60
3508.25

Amount
1432.60
706.32
115.40
4.07
108.36
98.28
338.39
52.00
2855.42
28.55
2883.97
432.60
3316.57

Amount

DSR-12

Page 1238 of 2298

1534.05
113.76
766.79
4.07
99.33
90.09
247.00
46.80
2901.89
29.02
2930.91
439.64
3370.55

Amount
1534.05
113.76
621.56
4.07
99.33
90.09
247.00
46.80
2756.66
27.57
2784.23
417.63
3201.86

nation 12.5 in superstructure above plinth

Amount
2050.10
115.40
706.32
4.07
141.47

DSR-12

Page 1239 of 2298

128.31
444.60
52.00
33.32

279.11
3954.70
39.55
3994.25
599.14
4593.39

nation 12.5 in superstructure above plinth

Amount
1850.60
113.76
621.56
4.07
132.44
120.12
353.21
46.80
24.41

279.11
3546.08
35.46
3581.54
537.23
4118.77

pto floor V level in all shapes and sizes in :

Amount
1432.60
871.35
115.40
4.07

DSR-12

Page 1240 of 2298

141.47
128.31
444.60
52.00
33.32

279.11
3502.23
35.02
3537.25
530.59
4067.84

pto floor V level in all shapes and sizes in :

Amount
1432.60
706.32
115.40
4.07
141.47
128.31
444.60
52.00
33.32

279.11
3337.20
33.37
3370.57
505.59
3876.16

Amount
812.50
330.32
1142.82
11.43

DSR-12

Page 1241 of 2298

1154.25
173.14
1327.39

Amount
226.80
20.14
0.39

111.37
101.01
227.24
6.78
693.73
6.94
700.67
105.10
805.77

Amount

1183.71 A

60.00
36.12
32.76
14.82
1327.41
1.44
1328.85
21.77
1350.62

DSR-12

Page 1242 of 2298

Amount
1093.30
750.34
88.07
216.72
196.56
434.72
93.60
10.65

318.63
3202.59
32.03
3234.62
485.19
3719.81

Amount
1432.60
1036.38
115.40
4.07

1950.08 A

28.09
159.53
144.69
565.63
52.00

279.11
5767.58
38.18

DSR-12

Page 1243 of 2298

5805.76
578.35
6384.11

Amount

22197.50
88.89

346.81

432.00

1.31
7644.00
5928.00
200.48

DSR-12

Page 1244 of 2298

-28869.78 A
7969.21
368.39
8337.60
5581.11
13918.71

Amount
1638.50
1160.75
131.98
20.14
135.45
122.85
382.85
182.00
3774.52
37.75
3812.27
571.84
4384.11

Amount
1638.50
975.91
131.98
20.14
135.45
122.85
382.85
182.00
3589.68
35.90
3625.58
543.84
4169.42

DSR-12

Page 1245 of 2298

Amount
1638.50
1160.75
131.98
20.14
180.60
163.80
494.00
182.00
318.63
4290.40
42.90
4333.30
650.00
4983.30

Amount
1638.50
975.91
131.98
20.14
180.60
163.80
494.00
182.00
318.63
4105.56
41.06
4146.62
621.99
4768.61

Amount

DSR-12

Page 1246 of 2298

812.50
330.32
1142.82
11.43
1154.25
173.14
1327.39

asonry ....
Amount

541.20
1.03
2.71
544.94
5.45
550.39
82.56
632.95

Amount
2408.70
1394.16
108.90
6.78
210.70
191.10
380.38
52.00
4752.72
47.53
4800.25
720.04
5520.29

DSR-12

Page 1247 of 2298

Amount
2408.70
1130.12
108.90
6.78
210.70
191.10
380.38
52.00
4488.68
44.89
4533.57
680.04
5213.61

CM 1:6
Amount

2874.90

108.90
1130.12
6.78
210.70
191.10
380.38
52.00
4954.88
49.55
5004.43
750.66
5755.09

vel in CM 1:6
Amount
2408.70
108.90
1130.12

DSR-12

Page 1248 of 2298

6.78
270.90
245.70
444.60
52.00
279.11
50.36
4997.17
49.97
5047.14
757.07
5804.21

Amount
2408.70
108.90
1219.89
8.14
1950.08 A

28.09
237.79
215.67
792.87
52.00

279.11
7301.24
53.51
7354.75
810.70
8165.45

Amount
2452.10
110.87
1219.89

DSR-12

Page 1249 of 2298

8.14

1950.08 A
28.09
451.50
409.50
1316.51
52.00

279.11
8277.79
63.28
8341.07
958.65
9299.72

Amount
1168.70
52.84
621.83
12.01
282.94
256.62
464.36
85.80

318.63
3263.73
32.64
3296.37
494.46
3790.83

Amount

DSR-12

Page 1250 of 2298

280.68 A

30.80
311.48
0.31
311.79
4.67
316.46

Amount

187.50
988.00
1175.50
11.76
1187.26
178.09
1365.35

Amount
6.02
5.46
61.75
37.05
110.28
1.10
111.38
16.71
128.09

nation 7.5 in exposed brick work including

el

DSR-12

Page 1251 of 2298

Amount
1432.60
115.40
706.32
24.41

123.50
105.35
95.55
264.29
52.00
2919.42
29.19
2948.61
442.29
3390.90

nation 7.5 in exposed brick work including

el

Amount
1432.60
115.40
706.32
24.41

123.50
138.46
125.58
395.20
52.00

279.11
33.32
3425.90
34.26
3460.16
519.02
3979.18

DSR-12

Page 1252 of 2298

in exposed brick work including making

Amount
1534.05
113.76
621.56
24.41

99.33
90.09
247.00
46.80
2777.00
27.77
2804.77
420.72
3225.49

in exposed brick work including making

Amount
1534.05
113.76
621.56
24.41

132.44
120.12
353.21
46.80

279.11
33.32
3258.78
32.59
3291.37
493.71
3785.08

DSR-12

Page 1253 of 2298

tion 12.5 in exposed brick work including

l

Amount
1753.20
113.76
621.56
24.41

99.33
90.09
247.00
46.80
2996.15
29.96
3026.11
453.92
3480.03

tion 12.5 in exposed brick work including

el.

Amount
1753.20
113.76
621.56
24.41

132.44
120.12
353.21
46.80

279.11
33.32
3477.93
34.78
3512.71
526.91
4039.62

DSR-12

Page 1254 of 2298

ss designation 12.5 in exposed brick work

el

Amount
1753.70
115.40
706.32
24.41

108.36
98.28
338.39
52.00
3196.86
31.97
3228.83
484.32
3713.15

s designation 12.5 in exposed brick work

oor V level.

Amount
1753.70
115.40
706.32
24.41

132.44
120.12
444.60
52.00

279.11
33.32
3661.42
36.61
3698.03
554.70
4252.73

DSR-12

Page 1255 of 2298

ricks of class designation 12.5 in exposed

o plinth level

Amount
2050.10
115.40
706.32
24.41

108.36
98.28
338.39
52.00
3493.26
34.93
3528.19
529.23
4057.42

ricks of class 12.5 in exposed brick work

oor V level.

Amount
2050.10
115.40
706.32
24.41

141.47
128.31
444.60
52.00

279.11
33.32
3975.04
39.75
4014.79
602.22
4617.01

DSR-12

Page 1256 of 2298

ss designation 12.5 in exposed brick work

el

Amount
1850.60
113.76
621.56
24.41

99.33
90.09
247.00
46.80
3093.55
30.94
3124.49
468.67
3593.16

lass 12.5 in exposed brick work including

el.

Amount
1850.60
113.76
621.56
24.41

132.44
120.12
353.21
46.80

279.11
33.32
3575.33
35.75
3611.08
541.66
4152.74

DSR-12

Page 1257 of 2298

Amount
1482.00
871.35
115.40
4.10
141.47
128.31
444.60
52.00
13.37

279.11
3531.71
35.32
3567.03
535.05
4102.08

l up to floor 5 level in : CM 1:6 (1 cement :

Amount
1482.00
706.32
115.40
4.07
141.47
128.31
444.60
52.00
13.37

279.11
3366.65
33.67
3400.32
510.05
3910.37

DSR-12

Page 1258 of 2298

Amount
1607.10
766.79
113.76
4.07
141.47
128.31
444.60
52.00
33.32

279.11
3570.53
35.71
3606.24
540.94
4147.18

oor V level in : CM 1:6 -Coarse sand

Amount
1607.10
621.56
113.76
4.07
141.47
128.31
444.60
52.00
33.32

279.11
3425.30
34.25
3459.55
518.93
3978.48

DSR-12

Page 1259 of 2298

PL to floor 5 level in CM 1:4

Amount
1753.20
766.79
113.76
4.07
141.47
128.31
444.60
52.00
33.32

279.11
3716.63
37.17
3753.80
563.07
4316.87

PL to floor 5 level in CM 1:6

Amount
1753.20
621.56
113.76
4.07
141.47
128.31
444.60
52.00
33.32

279.11
3571.40
35.71
3607.11
541.07
4148.18

DSR-12

Page 1260 of 2298

Amount
1899.30
766.79
113.76
4.07
99.33
90.09
247.00
46.80
3267.14
32.67
3299.81
494.97
3794.78

:3
Amount
1899.30
907.98
113.76
4.07
1950.08 A

126.42
114.66
459.42
52.00
5627.69
36.78
5664.47
557.16
6221.63

1:4
Amount
2025.00

DSR-12

Page 1261 of 2298

522.81
87.60
4.07
108.36
98.28
338.39
52.00
749.36 A
3985.87
32.37
4018.24
490.33
4508.57

evel
Amount
4550.00
1325.00
20.14
150.50
247.00
6292.64
62.93
6355.57
953.34
7308.91

Amount

427.31
427.31
4.27
431.58
64.74
496.32

DSR-12

Page 1262 of 2298

vel upto floor 5 level in CM 1:4

Amount
2124.20
871.35
115.40
4.07
141.47
128.31
444.60
52.00

279.11
33.32
4193.83
41.94
4235.77
635.37
4871.14

vel upto floor 5 level in CM 1:6

Amount
2124.20
706.32
115.40
4.07
141.47
128.31
444.60
52.00

279.11
33.32
4028.80
40.29
4069.09
610.36
4679.45

DSR-12

Page 1263 of 2298

Amount
4.07

133.40
10.75
10.70
28.70
24.70
7.80
4.07
224.19
2.24
226.43
33.96
260.39

signation 10, conforming to IS : 12894, in

Amount
1864.50
131.98
1160.75
20.14
180.60
163.80
494.00
182.00

318.63
4516.40
45.16
4561.56
684.23
5245.79

DSR-12

Page 1264 of 2298

signation 10, conforming to IS : 12894, in

Amount
1864.50
131.98
975.91
20.14
180.60
163.80
494.00
182.00

318.63
4331.56
43.32
4374.88
656.23
5031.11

ass designation 10, in SS above plinth and

Amount
2429.50
131.98
1160.75
20.14
180.60
163.80
494.00
182.00

318.63
5081.40
50.81
5132.21
769.83
5902.04

DSR-12

Page 1265 of 2298

ass designation 10, , in SS above plinth and

Amount
2429.50
131.98
975.91
20.14
180.60
163.80
494.00
182.00

318.63
4896.56
48.97
4945.53
741.83
5687.36

Amount
675.00
77.00

119.55
932.35

292.11
264.29
175.37
23.40
68.18
6.59
2633.84
26.34
2660.18
399.03
3059.21

DSR-12

Page 1266 of 2298

veling up with CC 1:6:12 at window sills,

Amount
675.00
77.00
119.55

932.35
365.82
358.15
175.37
23.40
84.26

279.11
22.66
3112.67
31.13
3143.80
471.57
3615.37

Amount
158.34
66.69
225.03
2.25
227.28
34.09
261.37

Amount
195.75
29.89

DSR-12

Page 1267 of 2298

387.66
86.45
699.75
7.00
706.75
106.01
812.76

Amount
67.50
10.31
73.71
130.91
282.43
2.82
285.25
42.79
328.04

oarse sand)
Amount
847.59
816.75
77.00

141.19
578.76
306.28
175.37
23.40
20.14
2986.48
29.86
3016.34
452.45
3468.79

rse sand)

DSR-12

Page 1268 of 2298

Amount
847.59
742.50
77.00

129.86
480.48
306.28
175.37
23.40
20.14
2802.62
28.03
2830.65
424.60
3255.25

ve plinth level and upto floor five level.-

Amount
847.59
816.75
77.00
141.19

649.74
392.73
175.37
23.40

279.11
56.17
3459.05
34.59
3493.64
524.05
4017.69

DSR-12

Page 1269 of 2298

ve plinth level and upto floor five level.-

Amount
847.59
742.50
77.00
129.86

551.46
392.73
175.37
23.40

279.11
56.17
3275.19
32.75
3307.94
496.19
3804.13

Amount
182.91
66.69
249.60
2.50
252.10
37.82
289.92

Amount
216.00
32.98

455.91
86.45
791.34

DSR-12

Page 1270 of 2298

7.91
799.25
119.89
919.14

Amount
74.25
11.34
90.09
130.91
306.59
3.07
309.66
46.45
356.11

one
Amount

79.98
2.41

3.71

24.02
1.81
10.87
5.43
11.44

12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01

DSR-12

Page 1271 of 2298

191.87
1.92
193.79
29.07
222.86

stone
Amount

86.65
2.41

3.71

24.02
1.81
10.87
5.43
11.44

12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01
198.54
1.99
200.53
30.08
230.61

one
Amount

DSR-12

Page 1272 of 2298

79.98
2.41

3.71

48.05
3.61
21.74
10.87
22.88

12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01
245.45
2.45
247.90
37.19
285.09

stone
Amount

86.65
2.41

3.71

48.05
3.61
21.74
10.87
22.88

DSR-12

Page 1273 of 2298

12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01
252.12
2.52
254.64
38.20
292.84

M 1:2 (1 white cement : 2 stone dust) - One

Amount
79.98

2.41

24.02
1.81
10.87
5.43
11.44
12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01
20.14
12.01

3.71
224.02
2.24
226.26
33.94
260.20

DSR-12

Page 1274 of 2298

M 1:2 (1 white cement : 2 stone dust) - One

Amount
86.65

2.41

24.02
1.81
10.87
5.43
11.44
12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01
20.14
12.01

3.71
230.69
2.31
233.00
34.95
267.95

ng with CM 1:2 (1 white cement : 2 stone

Amount
79.98

DSR-12

Page 1275 of 2298

2.41

48.05
3.61
21.74
10.87
22.88
12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01
20.14
12.01

3.71
277.60
2.78
280.38
42.06
322.44

ng with CM 1:2 (1 white cement : 2 stone

Amount
86.65

2.41

48.05
3.61
21.74
10.87
22.88
12.01
1.81
5.43

DSR-12

Page 1276 of 2298

5.43
5.72
5.72
4.07
12.01
20.14
12.01

3.71
284.27
2.84
287.11
43.07
330.18

ng with CM 1:2 (1 white cement : 2 stone

Amount
79.98

2.41

48.05
1.81
52.98
10.87
5.43
11.44
12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01
49.39
12.01

3.71
330.28
3.30
333.58
50.04

DSR-12

Page 1277 of 2298

383.62

ng with CM 1:2 (1 white cement : 2 stone

Amount
86.65

2.41

48.05
1.81
52.98
10.87
5.43
11.44
12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01
49.39
12.01

3.71
336.95
3.37
340.32
51.05
391.37

ng with CM 1:2 (1 white cement : 2 stone

Amount
79.98

DSR-12

Page 1278 of 2298

2.41

96.10
3.61
105.95
21.74
10.87
22.88
12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01
49.39
12.01

3.71
460.85
4.61
465.46
69.82
535.28

ng with CM 1:2 (1 white cement : 2 stone

Amount
86.65

2.41

96.10
3.61
105.95
21.74
10.87

DSR-12

Page 1279 of 2298

22.88
12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01
49.39
12.01

3.71
467.52
4.68
472.20
70.83
543.03

ingle faced punched.

Amount

79.98
2.41

16.11
1.81
10.87
5.43
11.44

12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01

3.71
183.96
1.84

DSR-12

Page 1280 of 2298

185.80
27.87
213.67

e: One Face punched

Amount
86.65

2.41

16.11
1.81
10.87
5.43
11.44

12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01

3.71
190.63
1.91
192.54
28.88
221.42

ed. - Red sand stone

Amount

79.98

DSR-12

Page 1281 of 2298

2.41

3.71

32.21
3.61
21.74
10.87
22.88

12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01
229.61
2.30
231.91
34.79
266.70

Double faced punched.

Amount

86.65
2.41

3.71

32.21
3.61
21.74
10.87
22.88

DSR-12

Page 1282 of 2298

12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01
236.28
2.36
238.64
35.80
274.44

ors or part thereof.

Amount

4.94
4.94
0.05
4.99
0.75
5.74

Amount
13.37
13.37
0.13
13.50
2.03
15.53

exceeding 6 metre.

DSR-12

Page 1283 of 2298

Amount
9.30
9.30
0.09
9.39
1.41
10.80

Amount

22197.50
88.89

346.81

432.00

1.31

DSR-12

Page 1284 of 2298

7644.00
5928.00
200.48

-28869.78 A
7969.21
368.39
8337.60
5581.11
13918.71

sand stone.
Amount

79.98
2.41

12.01

79.44
1.81
10.87
5.43
11.44

12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01

3.71
259.30
2.59
261.89
39.28
301.17

DSR-12

Page 1285 of 2298

te sand stone.
Amount

86.65
2.41
12.01

79.44
1.81
10.87
5.43
11.44

12.01
1.81
5.43
5.43
5.72
5.72
4.07
12.01

3.71
265.97
2.66
268.63
40.29
308.92

quare or rectangular pillars.

Amount
17.43
17.43
0.17
17.60
2.64

DSR-12

Page 1286 of 2298

20.24

gonal pillars.
Amount
49.39
49.39
0.49
49.88
7.48
57.36

Amount

136.50
185.25
321.75
3.22
324.97
48.75
373.72

Red sand stone-exposed face fine dressed

Amount

559.98
16.74
40.10

368.55
9.63
55.33
27.66
58.24

DSR-12

Page 1287 of 2298

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
1735.29
17.35
1752.64
262.90
2015.54

Red sand stone-exposed face fine dressed

Amount

480.00
14.33
40.10

368.55
9.63
55.33
27.66
58.24

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
1652.90
16.53
1669.43
250.41
1919.84

DSR-12

Page 1288 of 2298

Red sand stone-exposed face fine dressed

Amount

400.20
11.91
40.10

368.55
9.63
55.33
27.66
58.24

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
1570.68
15.71
1586.39
237.96
1824.35

Red sand stone-exposed face fine dressed

Amount

319.98
9.58
40.10

368.55
9.63
55.33
27.66
58.24

DSR-12

Page 1289 of 2298

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
1488.13
14.88
1503.01
225.45
1728.46

Red sand stone-exposed face fine dressed

Amount

239.94
7.16
40.10

368.55
9.63
55.33
27.66
58.24

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
1405.67
14.06
1419.73
212.96
1632.69

DSR-12

Page 1290 of 2298

Red sand stone - exposed face machine cut

Amount

559.98
16.74
40.10

737.10
19.26
110.66
55.33
116.48

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
2254.71
22.55
2277.26
341.59
2618.85

Red sand stone - exposed face machine cut

Amount

480.00
14.33
40.10

737.10
19.26
110.66
55.33
116.48

DSR-12

Page 1291 of 2298

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
2172.32
21.72
2194.04
329.11
2523.15

Red sand stone - exposed face machine cut

Amount

400.20
11.91
40.10

737.10
19.26
110.66
55.33
116.48

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
2090.10
20.90
2111.00
316.65
2427.65

DSR-12

Page 1292 of 2298

Red sand stone - exposed face machine cut

Amount

319.98
9.58
40.10

737.10
19.26
110.66
55.33
116.48

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
2007.55
20.08
2027.63
304.14
2331.77

Red sand stone - exposed face machine cut

Amount

239.94
7.16
40.10

737.10
19.26
110.66
55.33
116.48

DSR-12

Page 1293 of 2298

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
1925.09
19.25
1944.34
291.65
2235.99

White sand stone-exposed face fine dressed

Amount

606.65
16.74
40.10

368.55
9.63
55.33
27.66
58.24

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
1781.96
17.82
1799.78
269.97
2069.75

DSR-12

Page 1294 of 2298

White sand stone-exposed face fine dressed

Amount

520.00
14.33
40.10

368.55
9.63
55.33
27.66
58.24

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
1692.90
16.93
1709.83
256.47
1966.30

White sand stone-exposed face fine dressed

Amount

433.55
11.91
40.10

368.55
9.63
55.33
27.66
58.24

DSR-12

Page 1295 of 2298

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
1604.03
16.04
1620.07
243.01
1863.08

White sand stone-exposed face fine dressed

Amount

346.45
9.58
40.10

368.55
9.63
55.33
27.66
58.24

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
1514.60
15.15
1529.75
229.46
1759.21

DSR-12

Page 1296 of 2298

White sand stone-exposed face fine dressed

Amount

259.94
7.16
40.10

368.55
9.63
55.33
27.66
58.24

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
1425.67
14.26
1439.93
215.99
1655.92

White sand stone-exposed face machine cut

Amount

606.65
16.74
40.10

737.10
19.26
110.66
55.33
116.48

DSR-12

Page 1297 of 2298

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
2301.38
23.01
2324.39
348.66
2673.05

White sand stone-exposed face machine cut

Amount

520.00
14.33
40.10

737.10
19.26
110.66
55.33
116.48

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
2212.32
22.12
2234.44
335.17
2569.61

DSR-12

Page 1298 of 2298

White sand stone-exposed face machine cut

Amount

433.55
11.91
40.10

737.10
19.26
110.66
55.33
116.48

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
2123.45
21.23
2144.68
321.70
2466.38

White sand stone-exposed face machine cut

Amount

346.45
9.58
40.10

737.10
19.26
110.66
55.33

DSR-12

Page 1299 of 2298

116.48

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
2034.02
20.34
2054.36
308.15
2362.51

White sand stone-exposed face machine cut

Amount

259.94
7.16
40.10

737.10
19.26
110.66
55.33
116.48

122.30
87.36
82.99
82.99
87.36
32.00
29.44
74.62
1945.09
19.45
1964.54
294.68
2259.22

DSR-12

Page 1300 of 2298

Amount
13.37
13.37
0.13
13.50
2.03
15.53

Amount

313.92
5.81
4.86
96.85
421.44
4.21
425.65
63.85
489.50

Amount
13.56
7.94

DSR-12

Page 1301 of 2298

4.86
26.36
0.26
26.62
3.99
30.61

Amount

10.00
5.81
4.86
2.91
23.58
0.24
23.82
3.57
27.39

along the slope in CM 1:4 Red sand stone:

Amount

426.25
19.70
136.50
82.00
100.34
42.11
9.30
40.10
273.00
370.50
24.02

DSR-12

Page 1302 of 2298

154.96

73.22 A
1752.00
16.79
1768.79
254.34
2023.13

long the slope in CM 1:4 White sand stone

Amount

467.50
19.70
136.50
82.00
100.34
42.11
9.30
40.10
273.00
370.50
24.02

154.96

73.22 A
1793.25
17.20
1810.45
260.58
2071.03

DSR-12

Page 1303 of 2298

ne.
Amount

348.75
17.68
122.85
80.19
9.30
40.10
163.80
197.60
20.14
1000.41
10.00
1010.41
151.56
1161.97

tone.
Amount

382.50
17.68
122.85
80.19
9.30
40.10
163.80
197.60
20.14
1034.16
10.34
1044.50
156.68
1201.18

DSR-12

Page 1304 of 2298

alls with CM 1 : 4 CS.

Amount

240.00
10.90
20.14
234.78
123.50
629.32
6.29
635.61
95.34
730.95

cramps 25 x 6 mm, 30 cm long.

Amount

369.60
10.90

489.38
11.14
66.94
33.47
70.46
280.00

67.27
10.11
30.43
30.43

DSR-12

Page 1305 of 2298

32.03
32.03
22.78
67.26
285.95
1910.18
19.10
1929.28
289.39
2218.67

d sand stone.
Amount

1504.31 A
79.42
191.10
172.90
1947.73
4.43
1952.16
67.18
2019.34

hite sand stone.

Amount

1556.62 A
79.42
191.10
172.90
2000.04

DSR-12

Page 1306 of 2298

4.43
2004.47
67.18
2071.65

Amount

170.50
7.86

3467.10
2087.15
120.29
5852.90
58.53
5911.43
886.71
6798.14

Amount

187.00
7.86

3467.10
2087.15
120.29
5869.40
58.69
5928.09
889.21
6817.30

DSR-12

Page 1307 of 2298

water and removing slush.

Amount

187.50
988.00
1175.50
11.76
1187.26
178.09
1365.35

Amount
6.02
5.46
61.75
37.05
110.28
1.10
111.38
16.71
128.09

ce with stone strips

Amount

156.40

36.40

8.41
160.00

DSR-12

Page 1308 of 2298

126.02

193.47 A
60.24
75.25
68.25
123.50
7.80
40.10
1055.84
8.62
1064.46
130.65
1195.11

with CM 1:2 SD. Kota stone slabs exposed

Amount

2012.50
52.17
596.96
60.24
1774.50
1605.50
1062.10
2808.00
166.19
10138.16
101.38
10239.54
1535.93
11775.47

Amount

DSR-12

Page 1309 of 2298

6918.75
59.66
580.37
165.00
38.35
2317.70
1901.90
387.40
255.68
12624.81
126.25
12751.06
1912.66
14663.72

Amount

4920.00
59.66
580.37
165.00
38.35
2317.70
1901.90
387.40
255.68
10626.06
106.26
10732.32
1609.85
12342.17

Amount
320.77

DSR-12

Page 1310 of 2298

90.30
74.10
39.00
42.61
566.78
5.67
572.45
85.87
658.32

dges) of uniform colour and size 1m x 1m,

Amount

1740.00
80.00
16.74
45.71
228.57
305.08
602.00
988.00
247.00
305.08
75.25
123.50
305.08
76.32
5138.33
51.38
5189.71
778.46
5968.17

dges) of uniform colour and size 1m x 1m,

Amount

DSR-12

Page 1311 of 2298

1892.25
80.00
16.74
45.71
228.57
305.08
602.00
988.00
247.00
305.08
75.25
123.50
305.08
76.32
5290.58
52.91
5343.49
801.52
6145.01

ut eges sand stone)on walls at all heights

Amount

2470.56

2524.50

1494.14 A

78.26

DSR-12

Page 1312 of 2298

70.98
494.00

840.00
403.34
174.20
1215.24
120.29

614.07 B
120.29
10619.87
85.12
10704.99
1289.52
11994.51

Amount
840.00

27.30
273.00
271.70
30.99
30.99
1473.98
14.74
1488.72
223.31
1712.03

Amount

DSR-12

Page 1313 of 2298

366.00
2.34
33.16
11.41

100.84
87.10
82.75
82.75
87.10
42.90
40.64
19.95
956.94
9.57
966.51
144.98
1111.49

Amount

816.00
4.67
59.70
23.77

201.67
174.20
165.49
165.49
174.20
85.80
81.27
40.10
1992.36
19.92
2012.28
301.84
2314.12

DSR-12

Page 1314 of 2298

Sqm
Amount

320.25
41.82
210.70
80.28
80.28
58.11
24.21
815.65
8.16
823.81
123.57
947.38

Sqm
Amount

714.00
83.65
421.40
160.55
160.55
116.22
48.43
1704.80
17.05
1721.85
258.28
1980.13

Amount

813.75

DSR-12

Page 1315 of 2298

41.82
210.70
80.28
80.28
58.11
24.21
1309.15
13.09
1322.24
198.34
1520.58

Amount

3444.00
167.30
842.80
321.10
321.10
116.22
96.85
5309.37
53.09
5362.46
804.37
6166.83

ble work
Amount
300.00
494.00
116.22
910.22
9.10
919.32
137.90

DSR-12

Page 1316 of 2298

1057.22

Amount
500.00
864.50
174.33
1538.83
15.39
1554.22
233.13
1787.35

y resin based
Amount

90.30
74.10
58.11
17.43
239.94
2.40
242.34
36.35
278.69

Amount
120.40
98.80
22.80
242.00
2.42
244.42
36.66
281.08

DSR-12

Page 1317 of 2298

ss finish complete.
Amount

300.00
617.50
390.00
96.85
1404.35
14.04
1418.39
212.76
1631.15

cessary hole in stones and embedding the

Amount

329.40
5.81
4.86
96.85
436.92
4.37
441.29
66.19
507.48

cessary hole in stones and embedding the

DSR-12

Page 1318 of 2298

Amount

313.92
5.81
4.86
96.85
421.44
4.21
425.65
63.85
489.50

nd the cost of bolt etc. complete :- Wedge

Amount

360.00
24.30
75.25
61.75
48.43
569.73
5.70
575.43
86.31
661.74

nd the cost of bolt etc. complete :- Wedge

Amount

DSR-12

Page 1319 of 2298

420.00
32.40
75.25
61.75
48.43
637.83
6.38
644.21
96.63
740.84

nd the cost of bolt etc. complete :- Wedge

Amount

780.00
40.50
75.25
61.75
48.43
1005.93
10.06
1015.99
152.40
1168.39

ck: Raj Nagar plain/ Udaipur green marble/

Amount

348.50
5.89
58.04
37.82
16.50
301.00
247.00

DSR-12

Page 1320 of 2298

25.18
1039.93
10.40
1050.33
157.55
1207.88

k: Granite of any colour and shade.

Amount

691.88
5.89
58.04
37.82
16.50
301.00
247.00
25.18
1383.31
13.83
1397.14
209.57
1606.71

nal partitions: White Agaria Marble stone.

Amount

733.50

32.15

64.31
32.15
862.11
8.62

DSR-12

Page 1321 of 2298

870.73
130.61
1001.34

rinal partitions: Granite Stone of approved

Amount

821.25
32.15
64.31
32.15
949.86
9.50
959.36
143.90
1103.26

k wood
Amount
2432.00
3.80
206.64
17.29
2659.73
26.60
2686.33
402.95
3089.28

Amount
1900.00
3.80

DSR-12

Page 1322 of 2298

206.64
17.29
2127.73
21.28
2149.01
322.35
2471.36

d hollock wood.
Amount

1178.00
3.80
25.84
13.37
206.64
17.29
1444.94
14.45
1459.39
218.91
1678.30

Amount

2527.00
3.80
60.20
54.60

DSR-12

Page 1323 of 2298

49.40
2695.00
26.95
2721.95
408.29
3130.24

Amount

8300.00
16.62
273.00
247.00
80.19
8916.81
89.17
9005.98
1350.90
10356.88

k wood.
Amount

5146.00
16.62
112.88
27.12
273.00
247.00

DSR-12

Page 1324 of 2298

80.19
5902.81
59.03
5961.84
894.28
6856.12

Amount

243.20
0.38
20.66
1.73
265.97
2.66
268.63
40.29
308.92

Amount

190.00
0.38
20.66
1.73
212.77
2.13
214.90
32.24
247.14

DSR-12

Page 1325 of 2298

k wood.
Amount

117.80
0.38
2.58
1.34
20.66
1.73
144.49
1.44
145.93
21.89
167.82

.. ..Second class teak wood ....35 mm thick

Amount

3672.00
5.11
48.00
9.00
24.00
2.00
525.21
187.72
53.46
4526.50
45.27
4571.77
685.77

DSR-12

Page 1326 of 2298

5257.54

.. ..Second class teak wood ....30 mm thick

Amount

3168.00
4.40
48.00
9.00
24.00
2.00
525.21
187.72
53.46
4021.79
40.22
4062.01
609.30
4671.31

ollock wood 35 mm thick

Amount

DSR-12

Page 1327 of 2298

1785.00
5.11
34.68
13.56
48.00
9.00
24.00
2.00
525.21
187.72
53.46
2687.74
26.88
2714.62
407.19
3121.81

ollock wood 30 mm thick

Amount

1540.00
4.40
29.92
13.56
48.00
9.00
24.00
2.00
525.21
187.72
53.46
2437.27
24.37

DSR-12

Page 1328 of 2298

2461.64
369.25
2830.89

ssed butt hinges excluding, panelling - Kiln

Amount

3315.00
5.11
34.68
48.00
9.00
24.00
2.00
525.21
187.72
53.46
4204.18
42.04
4246.22
636.93
4883.15

ssed butt hinges excluding, panelling - Kiln

Amount

DSR-12

Page 1329 of 2298

2860.00
4.40
29.92
36.00
24.00

525.21
187.72
53.46
3720.71
37.21
3757.92
563.69
4321.61

ade-1, medium density flat pressed 3 layer

Amount

4236.40
44.16
48.00
9.00
24.00
2.00
149.24
148.20
53.46
4714.46
47.14
4761.60
714.24
5475.84

-laminated decorative lamination on both

DSR-12

Page 1330 of 2298

Amount

4593.40
44.16
48.00
9.00
24.00
2.00
149.24
148.20
53.46
5071.46
50.71
5122.17
768.33
5890.50

minated (decorative lamination on one side

Amount

4403.00
44.16
48.00
9.00
24.00
2.00
149.24
148.20
53.46
4881.06
48.81
4929.87
739.48
5669.35

DSR-12

Page 1331 of 2298

nd class teak wood.

Amount

928.80
1.29
171.57
6.59
1108.25
11.08
1119.33
167.90
1287.23

n seasoned and chemically treated Hollock

Amount

451.50
1.29
8.77
13.37
171.57
6.59
653.09
6.53
659.62
98.94
758.56

ve veneer on both sides.

DSR-12

Page 1332 of 2298

Amount

768.00
2.71
171.57
6.59
948.87
9.49
958.36
143.75
1102.11

ive veneer on one side and commr veneer

Amount

620.00
2.71
171.57
6.59
800.87
8.01
808.88
121.33
930.21

e decorative veneering.

Amount

676.00
2.71
171.57

DSR-12

Page 1333 of 2298

6.59
856.87
8.57
865.44
129.82
995.26

board.
Amount

260.00
2.71
171.57
6.59
440.87
4.41
445.28
66.79
512.07

12mm thick veneered particle board with

Amount

384.00
2.71
171.57
6.59
564.87
5.65
570.52
85.58
656.10

DSR-12

Page 1334 of 2298

d particle board - one side laminated.

Amount

552.00
2.71
171.57
6.59
732.87
7.33
740.20
111.03
851.23

d particle board - both sides laminated.

Amount

576.00
2.71
171.57
6.59
756.87
7.57
764.44
114.67
879.11

ors, windows etc - for panelled or panelled

Amount

DSR-12

Page 1335 of 2298

497.60
2.71
171.57
6.59
678.47
6.78
685.25
102.79
788.04

ors, windows etc - for panelled or panelled

Amount

248.00
2.71
163.59
40.95
37.05
37.95
530.25
5.30
535.55
80.33
615.88

ors, windows etc - for panelled or panelled

Amount

360.00

DSR-12

Page 1336 of 2298

2.71
163.59
40.95
37.05
37.95
642.25
6.42
648.67
97.30
745.97

ors, windows etc - for panelled or panelled

e with 0.5 mm dia. Wire and 1.4 m

Amount

608.00
2.71
155.61
6.59
772.91
7.73
780.64
117.10
897.74

M.S butt hinges, screws etc - Second class

Amount

DSR-12

Page 1337 of 2298

4176.00
393.70
48.00
9.00
24.00
2.00
5.81
525.21
62.79
190.19
60.24
5496.94
54.97
5551.91
832.79
6384.70

Amount

3600.00
393.70
48.00
9.00
24.00
2.00
5.01
525.21
62.79
190.19
60.24

DSR-12

Page 1338 of 2298

4920.14
49.20
4969.34
745.40
5714.74

ollock wood : 35 mm thick.

Amount

2030.00
39.44
13.56
393.70
48.00
9.00
24.00
2.00
5.81
525.21
62.79
190.19
60.24
3403.94
34.04
3437.98
515.70
3953.68

ollock wood : 30 mm thick.

DSR-12

Page 1339 of 2298

Amount

1750.00
34.00
13.56
393.70
48.00
9.00
24.00
2.00
5.01
525.21
62.79
190.19
60.24
3117.70
31.18
3148.88
472.33
3621.21

essed butt hinges - Kiln seasoned selected

Amount

DSR-12

Page 1340 of 2298

3770.00
39.44
5.81
393.70
48.00
9.00
24.00
2.00

525.21
62.79
190.19
60.24
5130.38
51.30
5181.68
777.25
5958.93

hinges - Kiln seasoned selected planks of

Amount

3250.00
5.01
34.00
393.70
48.00
9.00
24.00
2.00

525.21

DSR-12

Page 1341 of 2298

62.79
190.19
60.24
4604.14
46.04
4650.18
697.53
5347.71

15:2001,using 4mm thick float glass panes

ick shutters.

Amount

3760.40
44.16
48.00
9.00
24.00
2.00
149.24
148.20
53.46
4238.46
42.38
4280.84
642.13
4922.97

ters 5.5mm instead of 4mm

Amount

450.00
-310.00
140.00
1.40
141.40
21.21
162.61

DSR-12

Page 1342 of 2298

Amount
315.00
-310.00
5.00
0.05
5.05
0.76
5.81

Amount

255.00
-310.00
-55.00
-0.55
-55.55
-8.33
-63.88

Amount

138.00
25.00
93.60
7.60

-48.00
-9.00
-24.00
-2.00
181.20
1.81
183.01

DSR-12

Page 1343 of 2298

27.45
210.46

d and other inferior class of wood shutters

Amount

138.00
25.00
93.60
7.60
264.20
2.64
266.84
40.03
306.87

other inferior class of wood shutters

Amount

48.00
9.00
24.00
2.00
83.00
0.83
83.83
12.57
96.40

d class teak wood i/c anodised aluminium

Amount

DSR-12

Page 1344 of 2298

2880.00
4.00
306.90
234.00
91.20
722.40
49.14
190.19
60.24
4538.07
45.38
4583.45
687.52
5270.97

zed shutters - Second class teak wood with

Amount

2880.00

DSR-12

Page 1345 of 2298

4.00
306.90

140.00
216.60
722.40
49.14
190.19
60.24
4569.47
45.69
4615.16
692.27
5307.43

ed aluminium hinges
Amount

3096.00
393.70
234.00
14.40
4.30
525.21
62.79
190.19
60.24
4580.83
45.81
4626.64
694.00
5320.64

DSR-12

Page 1346 of 2298

nd class teak wood - nickel plated bright

Amount

3096.00
4.00
393.70
140.00
34.20

525.21
62.79
190.19
60.24
4506.33
45.06
4551.39
682.71
5234.10
(Error in DAR Calculations)

ck
Amount

2388.75
20.14
40.10
245.70
247.00
2941.69
29.42
2971.11
445.67
3416.78

DSR-12

Page 1347 of 2298

ck
Amount

2866.50
29.44
40.10
245.70
247.00
3428.74
34.29
3463.03
519.45
3982.48

rative and other side balancing lamination

Amount

510.30
1.36
30.03
14.82
11.62
568.13
5.68
573.81
86.07
659.88

rative and other side balancing lamination

DSR-12

Page 1348 of 2298

Amount

554.40
2.71
30.03
14.82
11.62
613.58
6.14
619.72
92.96
712.68

n both faces 35mm thick i/c stainless steel

Amount

3520.00
44.16
138.00
93.60

157.85
135.85
4089.46
40.89
4130.35
619.55
4749.90

n both faces 30mm thick i/c stainless steel

Amount

3190.00
44.16
138.00

DSR-12

Page 1349 of 2298

93.60

157.85
135.85
3759.46
37.59
3797.05
569.56
4366.61

both faces 25mm thick i/c nickel plated MS

Amount

2860.00
44.16
154.00
37.50

157.85
135.85
3389.36
33.89
3423.25
513.49
3936.74

Amount
2420.00
44.16
138.00
93.60

157.85
135.85
2989.46

DSR-12

Page 1350 of 2298

29.89
3019.35
452.90
3472.25

ges:
Amount
2090.00
44.16
138.00
93.60

157.85
135.85
2659.46
26.59
2686.05
402.91
3088.96

including ISI marked nickel plated bright

Amount
1870.00
44.16

154.00
37.50

157.85
135.85
2399.36
23.99
2423.35
363.50
2786.85

DSR-12

Page 1351 of 2298

Amount
320.00
320.00
3.20
323.20
48.48
371.68

n all edges of shutters Over item 9.24 and

Amount
280.00
280.00
2.80
282.80
42.42
325.22

Amount
110.00
110.00
1.10
111.10
16.67
127.77

Amount
170.00
170.00
1.70
171.70
25.76

DSR-12

Page 1352 of 2298

197.46

Amount
290.00
290.00
2.90
292.90
43.94
336.84

Amount
80.00
80.00
0.80
80.80
12.12
92.92

h directions 0.63 mm dia wire for doors,

Amount

3700.80

DSR-12

Page 1353 of 2298

324.30
48.00
9.00
24.00
2.00
5.15
391.30
245.70
259.35
31.61
50.36
5091.57
50.92
5142.49
771.37
5913.86

h directions 0.63 mm dia wire for doors,

hollock wood.

Amount

1799.00
5.15
34.95
13.37

324.30
48.00
9.00
24.00

DSR-12

Page 1354 of 2298

2.00

391.30
245.70
259.35
31.61
50.36
3238.09
32.38
3270.47
490.57
3761.04

h directions 0.63 mm dia wire for doors,

m wood.

Amount

3341.00
5.15
34.95

324.30
48.00
9.00
24.00
2.00

391.30
245.70
259.35
31.61
50.36
4766.72
47.67

DSR-12

Page 1355 of 2298

4814.39
722.16
5536.55

h directions 0.63 mm dia wire for doors,

Amount

3700.80
5.15

324.30
138.00
25.00
93.60
7.60
391.30
245.70
259.35
31.61
50.36
5272.77
52.73
5325.50
798.83
6124.33

h directions 0.63 mm dia wire for doors,

hollock wood.

DSR-12

Page 1356 of 2298

Amount

1799.00
5.15
34.95
13.37

324.30
138.00
25.00
93.60
7.60
391.30
245.70
259.35
31.61
50.36
3419.29
34.19
3453.48
518.02
3971.50

h directions 0.63 mm dia wire for doors,

ham wood.

Amount

DSR-12

Page 1357 of 2298

3341.00
5.15
34.95

324.30
138.00
25.00
93.60
7.60
391.30
245.70
259.35
31.61
50.36
4947.92
49.48
4997.40
749.61
5747.01

h directions 0.63 mm dia wire for doors,

Amount

3168.00
4.40

324.30
48.00

DSR-12

Page 1358 of 2298

9.00
24.00
2.00

361.20
218.40
247.00
30.10
50.36
4486.76
44.87
4531.63
679.74
5211.37

h directions 0.63 mm dia wire for doors,

hollock wood.

Amount

1540.00
4.40
29.92
13.56

324.30
48.00
9.00
24.00
2.00

361.20
218.40

DSR-12

Page 1359 of 2298

247.00
30.10
50.36
2902.24
29.02
2931.26
439.69
3370.95

h directions 0.63 mm dia wire for doors,

ham wood.

Amount

2860.00
4.40
29.92

324.30
48.00
9.00
24.00
2.00

361.20
218.40
247.00
30.10
50.36
4208.68
42.09
4250.77
637.62
4888.39

DSR-12

Page 1360 of 2298

h directions 0.63 mm dia wire for doors,

Amount

3168.00
4.40

324.30
138.00
25.00
93.60
7.60
361.20
218.40
247.00
30.10
50.36
4667.96
46.68
4714.64
707.20
5421.84

h directions 0.63 mm dia wire for doors,

ck wood.

Amount

DSR-12

Page 1361 of 2298

1540.00
4.40
29.92
13.37

324.30
138.00
25.00
93.60
7.60
361.20
218.40
247.00
30.10
50.36
3083.25
30.83
3114.08
467.11
3581.19

h directions 0.63 mm dia wire for doors,

d.

Amount

2860.00
4.40
29.92

DSR-12

Page 1362 of 2298

324.30
138.00
25.00
93.60
7.60
361.20
218.40
247.00
30.10
50.36
4389.88
43.90
4433.78
665.07
5098.85

windows 35 mm thick
Amount

3879.40
44.16
48.00
9.00
24.00
2.00
149.24
148.20
53.46
4357.46
43.57
4401.03
660.15
5061.18

windows 30 mm thick
Amount

DSR-12

Page 1363 of 2298

3296.30
44.16
48.00
9.00
24.00
2.00
149.24
148.20
53.46
3774.36
37.74
3812.10
571.82
4383.92

Amount

896.00
1.40
7.26

204.75
204.75
185.25
1499.41
14.99
1514.40
227.16
1741.56

Amount

DSR-12

Page 1364 of 2298

80.00
30.99
110.99
1.11
112.10
16.82
128.92

Amount

90.00
38.74
128.74
1.29
130.03
19.50
149.53

Amount

120.00
38.74
158.74
1.59
160.33
24.05
184.38

Amount

DSR-12

Page 1365 of 2298

140.00
38.74
178.74
1.79
180.53
27.08
207.61

40 mm thick
Amount

31680.00
5060.00

958.10 A
258.30 B
44.05

647.15
400.14
80.19
39127.93
379.12
39507.05
5743.60
45250.65

25 mm thick.
Amount

19800.00
3162.50
27.53

DSR-12

Page 1366 of 2298

958.10 A
258.30 B

647.15
400.14
80.19
25333.91
241.18
25575.09
3653.80
29228.89

20 mm thick
Amount

15840.00
2530.00
22.02

958.10 A
258.30 B

325.08
218.40
266.76
80.19
20498.85
192.82
20691.67
2921.29
23612.96

12 mm thick
Amount

DSR-12

Page 1367 of 2298

9504.00
1518.00
13.21

958.10 A

325.08
218.40
266.76
258.30 B
80.19
13142.04
119.26
13261.30
1806.74
15068.04

inated one side decorative lamination on

Amount

7590.00
20.14
40.10
258.30 A

349.44
353.21
550.00
9161.19
89.03
9250.22
1348.79
10599.01

DSR-12

Page 1368 of 2298

inated one side decorative lamination on

Amount

8910.00
20.14
40.10
258.30 A

349.44
353.21
550.00
10481.19
102.23
10583.42
1548.77
12132.19

inated one side decorative lamination on

Amount

9680.00
20.14
40.10
258.30 A

349.44
353.21
550.00
11251.19
109.93
11361.12
1665.42

DSR-12

Page 1369 of 2298

13026.54

ing Hollock wood.

Amount

1155.00
3.30
301.00
61.75
10.07

96.86 A
550.00
106.54
2284.52
21.88
2306.40
331.43
2637.83

approved manufacture.

Amount

4800.00
8.14

958.10 A

1143.80
1136.20
180.60
80.19

DSR-12

Page 1370 of 2298

258.30 B
8565.33
73.49
8638.82
1113.36
9752.18

Amount

3264.00
8.14

958.10 A

1143.80
1136.20
180.60
80.19
258.30 B
7029.33
58.13
7087.46
880.66
7968.12

nat- ion) flat pressed,3 layer and graded

Amount

5346.00
12.08

DSR-12

Page 1371 of 2298

1020.00
193.70

210.21
212.42
80.19
154.98 A
7229.58
70.75
7300.33
1071.80
8372.13

nat- ion) flat pressed,3 layer and graded

Amount

5808.00
12.08
1020.00
193.70

210.21
212.42
80.19
154.98 A
7691.58
75.37
7766.95
1141.80
8908.75

class teak wood : 50 x 12 mm.

DSR-12

Page 1372 of 2298

Amount

237.60
0.33
18.00

9.56 A

159.53
425.02
4.15
429.17
62.94
492.11

class teak wood : 50 x 20 mm.

Amount

396.00
0.55
18.00

11.62 A

159.53
585.70
5.74
591.44
86.97
678.41

DSR-12

Page 1373 of 2298

ock wood : 50 x 12 mm.

Amount

115.50
0.33
18.00

9.56 A

159.53
302.92
2.93
305.85
44.44
350.29

ock wood : 50 x 20 mm.

Amount

192.50
0.55
18.00

11.62 A

159.53
382.20
3.71
385.91
56.14
442.05

DSR-12

Page 1374 of 2298

y) i/c fixing 50 x 12mm beading :- Second

Amount

2304.00
3.20
225.75
273.00
123.50
30.10
50.36
3009.91
30.10
3040.01
456.00
3496.01

cial plywood, MS nickel pipe 20mm dia

Amount

124.80

91.80
110.55
12.00
0.77
12.01
11.20
20.00

DSR-12

Page 1375 of 2298

49.14
44.46
33.11
4.07
513.91
5.14
519.05
77.86
596.91

eneer board, nickle plated MS pipe 20 mm

Amount

304.00

99.09
110.55
12.00
0.77
12.01
11.20
20.00
49.14
44.46
33.11
4.07
700.40
7.00
707.40
106.11
813.51

Amount

DSR-12

Page 1376 of 2298

49.60
49.60
0.50
50.10
7.52
57.62

Amount

145.60
145.60
1.46
147.06
22.06
169.12

Amount

200.00
68.25
61.75
330.00
3.30
333.30
50.00
383.30

DSR-12

Page 1377 of 2298

Amount

360.00
14.00
6.00
2.32

34.84 A
4.07
2.32
423.55
3.89
427.44
58.89
486.33

Amount

500.00
14.00
6.00
2.32

34.84 A
4.07
2.32
563.55
5.29
568.84
80.10
648.94

Amount

DSR-12

Page 1378 of 2298

660.00
14.00
6.00
2.32

34.84 A
4.07
2.32
723.55
6.89
730.44
104.34
834.78

Amount

134.00
12.00
6.00
2.32
20.00
7.75
2.32
184.39
1.84
186.23
27.93
214.16

Amount

150.00
14.00
6.00
2.32
20.00
7.75
2.32
202.39
2.02
204.41
30.66

DSR-12

Page 1379 of 2298

235.07

Amount

660.00
168.00
1.56
40.10
29.44

22.38 A

258.86
271.70
1452.04
14.30
1466.34
216.59
1682.93

with rawl plugs screws etc

Amount

660.00

DSR-12

Page 1380 of 2298

168.00

1.56
40.10
29.44

22.38 A

258.86
271.70
80.00

38.74
1570.78
15.48
1586.26
234.58
1820.84

x19mm beading of 2nd class teak wood

Amount

456.30
2.71

31.91 A

DSR-12

Page 1381 of 2298

432.00
0.60
90.09
61.75
40.10
1115.46
10.84
1126.30
164.16
1290.46

sqm to window frames etc. i/c 62 x 19mm

Amount

726.70
2.71

31.91 A

432.00
0.60
90.09
61.75
29.44
1375.20
13.43
1388.63
203.51
1592.14

h average width of aperture 1.4 mm of dia.

DSR-12

Page 1382 of 2298

Amount

388.70
2.71

432.00
0.60
90.09
61.75
29.44
1005.29
10.05
1015.34
152.30
1167.64

h average width of aperture 1.4 mm of dia.

Amount

388.70
2.71
70.00
90.09
61.75
29.44
642.69
6.43
649.12
97.37
746.49

DSR-12

Page 1383 of 2298

in panelled and glazed door and window

Amount

430.00
-310.00
120.00
1.20
121.20
18.18
139.38

Amount

28.14
2.71

23.91 A
8.14
8.19
9.03
7.41
87.53
0.64
88.17
9.64
97.81

exposed surfaces, etc. complete with :- Sal

Amount

DSR-12

Page 1384 of 2298

10355.00
20.72
10.09 A

191.10
358.15
182.00
40.10
11157.16
111.47
11268.63
1688.78
12957.41

unexposed surfaces, etc. complete with :-

Amount

6420.10
20.72
10.09 A

191.10
358.15
182.00
40.10
7222.26
72.12
7294.38
1092.64
8387.02

65 x 2.12 mm.
Amount

130.00
48.00
4.07

DSR-12

Page 1385 of 2298

38.22
22.23
242.52
2.43
244.95
36.74
281.69

x 58 x 1.90 mm._x000D_

Amount
80.00
40.00

4.07
38.22
22.23
184.52
1.85
186.37
27.96
214.33

7 x 1.70 mm.
Amount

60.00
24.00
2.71
38.22
22.23
147.16
1.47
148.63
22.29
170.92

DSR-12

Page 1386 of 2298

7 X 1.50 mm.
Amount

45.00
10.00
1.36
21.84
78.20
0.78
78.98
11.85
90.83

5 x 90 x 4.00 mm.
Amount

320.00
48.00
4.07
38.22
22.23
432.52
4.33
436.85
65.53
502.38

0 x 75 x 3.50 mm.
Amount

160.00
40.00
4.07
38.22
22.23
264.52
2.65
267.17

DSR-12

Page 1387 of 2298

40.08
307.25

x 60 x 3.10 mm.
Amount

83.00
24.00
2.71
38.22
22.23
170.16
1.70
171.86
25.78
197.64

x 40 x 2.50 mm.
Amount

70.00
10.00
1.36
21.84
103.20
1.03
104.23
15.63
119.86

12 mm.
Amount

130.00
56.00

DSR-12

Page 1388 of 2298

5.42
38.22
22.23
251.87
2.52
254.39
38.16
292.55

0 mm.
Amount

80.00
40.00
4.07
38.22
22.23
184.52
1.85
186.37
27.96
214.33

0 mm.
Amount

55.00
27.00
2.71
38.22
22.23
145.16
1.45
146.61
21.99
168.60

0 mm.

DSR-12

Page 1389 of 2298

Amount

45.00
12.00
1.36
21.84
80.20
0.80
81.00
12.15
93.15

0x125x27x2.80 mm
Amount

320.00
40.00
4.07
38.22
34.58
436.87
4.37
441.24
66.19
507.43

5x125x27x2.80 mm
Amount

300.00
40.00
4.07
38.22
34.58
416.87
4.17
421.04
63.16
484.20

DSR-12

Page 1390 of 2298

0x125x27x2.80 mm
Amount

225.00
40.00
4.07
38.22
34.58
341.87
3.42
345.29
51.79
397.08

x 100 x 20 x 2.24 mm.

Amount

190.00
27.00
4.07
38.22
34.58
293.87
2.94
296.81
44.52
341.33

mm._x000D_
Amount
1050.00
56.00
4.07

DSR-12

Page 1391 of 2298

109.20
49.40
1268.67
12.69
1281.36
192.20
1473.56

m.
Amount

1000.00
56.00
4.07
109.20
49.40
1218.67
12.19
1230.86
184.63
1415.49

m.
Amount

800.00
40.00
4.07
109.20
49.40
1002.67
10.03
1012.70
151.91
1164.61

DSR-12

Page 1392 of 2298

mm.
Amount

1100.00
56.00
4.07
109.20
49.40
1318.67
13.19
1331.86
199.78
1531.64

mm.
Amount

1050.00
56.00
4.07
109.20
49.40
1268.67
12.69
1281.36
192.20
1473.56

mm.
Amount

850.00
40.00
4.07
109.20
49.40
1052.67

DSR-12

Page 1393 of 2298

10.53
1063.20
159.48
1222.68

Amount

40.00
9.00
2.71
38.22
22.23
112.16
1.12
113.28
16.99
130.27

Amount

39.00
9.00
2.71
38.22
22.23
111.16
1.11
112.27
16.84
129.11

Amount

49.00

DSR-12

Page 1394 of 2298

9.00
2.71
38.22
22.23
121.16
1.21
122.37
18.36
140.73

Amount

900.00
48.00
200.00
9.49
68.25
1225.74
12.26
1238.00
185.70
1423.70

Amount

800.00
40.00
200.00
9.49
68.25
1117.74
11.18
1128.92
169.34
1298.26

DSR-12

Page 1395 of 2298

Amount

400.00
45.00
5.42
27.30
477.72
4.78
482.50
72.38
554.88

Amount

350.00
36.00
4.07
27.30
417.37
4.17
421.54
63.23
484.77

Amount

250.00
27.00
4.07
27.30
308.37
3.08
311.45
46.72
358.17

DSR-12

Page 1396 of 2298

Amount

200.00
27.00
4.07
21.84
252.91
2.53
255.44
38.32
293.76

Amount

440.00
9.49
68.25
517.74
5.18
522.92
78.44
601.36

20 x 6 mm.
Amount

450.00
31.50
5.42
32.76
519.68
5.20
524.88
78.73
603.61

DSR-12

Page 1397 of 2298

20 x 6 mm.
Amount

400.00
31.50
5.42
32.76
469.68
4.70
474.38
71.16
545.54

Amount

170.00
14.00
4.07
16.38
204.45
2.04
206.49
30.97
237.46

Amount

150.00
14.00
2.71
16.38
183.09
1.83

DSR-12

Page 1398 of 2298

184.92
27.74
212.66

Amount

140.00
14.00
2.71
16.38
173.09
1.73
174.82
26.22
201.04

Amount

120.00
28.00
2.71
21.84
172.55
1.73
174.28
26.14
200.42

Amount

100.00
24.50
2.71
21.84

DSR-12

Page 1399 of 2298

149.05
1.49
150.54
22.58
173.12

Amount

75.00
24.50
2.71
21.84
124.05
1.24
125.29
18.79
144.08

mm weighing not less than 200 gms.

Amount
210.00
18.00
1.36
27.30
256.66
2.57
259.23
38.88
298.11

mm weighing not less than 150 gms.

Amount

180.00

DSR-12

Page 1400 of 2298

14.00
1.36
27.30
222.66
2.23
224.89
33.73
258.62

mm weighing not less than 120 gms.

Amount

170.00
14.00
1.36
27.30
212.66
2.13
214.79
32.22
247.01

Amount

600.00
21.00
1.36
27.30
649.66
6.50
656.16
98.42
754.58

mm.
Amount

DSR-12

Page 1401 of 2298

240.00
192.00
4.07
38.22
22.23
496.52
4.97
501.49
75.22
576.71

mm.
Amount

215.00
156.00
4.07
38.22
22.23
435.52
4.36
439.88
65.98
505.86

m.
Amount

145.00
87.00
2.71
38.22
22.23
295.16
2.95
298.11
44.72
342.83

DSR-12

Page 1402 of 2298

m.
Amount

125.00
38.00
1.36
21.84
186.20
1.86
188.06
28.21
216.27

25 x 64 x 2.50 mm.

Amount

320.00
192.00
4.07
38.22
22.23
576.52
5.77
582.29
87.34
669.63

00 x 60 x 2.50 mm.

Amount

230.00
156.00
4.07
38.22
22.23
450.52

DSR-12

Page 1403 of 2298

4.51
455.03
68.25
523.28

5 x 50 x 2.50 mm.

Amount

195.00
87.00
2.71
38.22
22.23
345.16
3.45
348.61
52.29
400.90

Amount

2900.00
200.00
5.42
42.14
24.70
3172.26
31.72
3203.98
480.60
3684.58

Amount

DSR-12

Page 1404 of 2298

800.00
200.00
5.42
42.14
24.70
1072.26
10.72
1082.98
162.45
1245.43

Amount

2600.00
128.00
4.07
42.14
24.70
2798.91
27.99
2826.90
424.04
3250.94

Amount

650.00
128.00
4.07
42.14
24.70
848.91
8.49
857.40
128.61
986.01

DSR-12

Page 1405 of 2298

Amount

900.00
78.00
4.07
42.14
24.70
1048.91
10.49
1059.40
158.91
1218.31

Amount

400.00
78.00
4.07
42.14
24.70
548.91
5.49
554.40
83.16
637.56

Amount

175.00
32.00
2.71
24.08
233.79
2.34
236.13
35.42
271.55

DSR-12

Page 1406 of 2298

Amount

2600.00
128.00
4.07
42.14
34.58
2808.79
28.09
2836.88
425.53
3262.41

Amount

2300.00
128.00
4.07
42.14
34.58
2508.79
25.09
2533.88
380.08
2913.96

Amount
2000.00
128.00
4.07
42.14
34.58

DSR-12

Page 1407 of 2298

2208.79
22.09
2230.88
334.63
2565.51

Amount

1600.00
78.00
4.07
42.14
34.58
1758.79
17.59
1776.38
266.46
2042.84

Amount
2250.00
130.00
6.78
30.10
2416.88
24.17
2441.05
366.16
2807.21

Amount
1750.00
104.00
4.07

DSR-12

Page 1408 of 2298

30.10
1888.17
18.88
1907.05
286.06
2193.11

Amount
1400.00
104.00
4.07
30.10
1538.17
15.38
1553.55
233.03
1786.58

Amount

900.00
78.00
4.07
30.10
1012.17
10.12
1022.29
153.34
1175.63

Amount

1600.00

DSR-12

Page 1409 of 2298

85.50
5.42
36.12
1727.04
17.27
1744.31
261.65
2005.96

Amount
1500.00
85.50
5.42
36.12
1627.04
16.27
1643.31
246.50
1889.81

er handles._x000D_
Amount

350.00

51.17
5.42
406.59
4.07
410.66
61.60
472.26

dles.
Amount

DSR-12

Page 1410 of 2298

300.00
51.17
5.42
356.59
3.57
360.16
54.02
414.18

Amount
450.00
51.17
5.42
506.59
5.07
511.66
76.75
588.41

mm.
Amount
65.00
51.17
5.42
121.59
1.22
122.81
18.42
141.23

mm.
Amount

70.00

DSR-12

Page 1411 of 2298

51.17
5.42
126.59
1.27
127.86
19.18
147.04

mm.
Amount
75.00

51.17
5.42
131.59
1.32
132.91
19.94
152.85

mm.
Amount
95.00
51.17
5.42
151.59
1.52
153.11
22.97
176.08

Amount
300.00
4.07

DSR-12

Page 1412 of 2298

42.14
346.21
3.46
349.67
52.45
402.12

Amount
1400.00
38.00
4.07
18.06
1460.13
14.60
1474.73
221.21
1695.94

Amount
1250.00
38.00
1.36
18.06
1307.42
13.07
1320.49
198.07
1518.56

Amount
950.00
38.00
1.36

DSR-12

Page 1413 of 2298

18.06
1007.42
10.07
1017.49
152.62
1170.11

Amount

600.00
19.00
4.07
9.03
632.10
6.32
638.42
95.76
734.18

complete. _x000D_
Amount
5350.00
78.00
5.42
273.00
5706.42
57.06
5763.48
864.52
6628.00

Amount
8100.00
78.00

DSR-12

Page 1414 of 2298

1.49
273.00
8452.49
84.52
8537.01
1280.55
9817.56

Amount
450.00
38.00
1.36
30.10
519.46
5.19
524.65
78.70
603.35

Amount
1200.00
52.00
1.36
30.10
1283.46
12.83
1296.29
194.44
1490.73

Amount

1000.00

DSR-12

Page 1415 of 2298

38.00
1.36
30.10
1069.46
10.69
1080.15
162.02
1242.17

Amount
900.00
38.00
1.36
30.10
969.46
9.69
979.15
146.87
1126.02

Amount
700.00
76.00
2.71
24.08
802.79
8.03
810.82
121.62
932.44

Amount
600.00

DSR-12

Page 1416 of 2298

56.00
2.71
24.08
682.79
6.83
689.62
103.44
793.06

Amount
500.00
56.00
2.71
24.08
582.79
5.83
588.62
88.29
676.91

dles with n/ascrews.

Amount
500.00
51.17
5.42
556.59
5.57
562.16
84.32
646.48

Amount
500.00

DSR-12

Page 1417 of 2298

51.17
5.42
556.59
5.57
562.16
84.32
646.48

Amount
62.00
51.17
5.42
118.59
1.19
119.78
17.97
137.75

Amount
70.00
51.17
5.42
126.59
1.27
127.86
19.18
147.04

Amount
82.00
51.17
5.42
138.59

DSR-12

Page 1418 of 2298

1.39
139.98
21.00
160.98

Amount

103.00
51.17
5.42
159.59
1.60
161.19
24.18
185.37

Amount
450.00
4.07
42.14
496.21
4.96
501.17
75.18
576.35

Amount
1600.00
38.00
4.07
18.06
1660.13
16.60

DSR-12

Page 1419 of 2298

1676.73
251.51
1928.24

Amount

1400.00
38.00
1.36
18.06
1457.42
14.57
1471.99
220.80
1692.79

Amount
1200.00
38.00
1.36
18.06
1257.42
12.57
1269.99
190.50
1460.49

Amount
900.00
46.00
1.36
30.10
977.46

DSR-12

Page 1420 of 2298

9.77
987.23
148.08
1135.31

Amount
1400.00
46.00
1.36
30.10
1477.46
14.77
1492.23
223.83
1716.06

Amount
1200.00
46.00
1.36
30.10
1277.46
12.77
1290.23
193.53
1483.76

Amount

1000.00
46.00
1.36
30.10

DSR-12

Page 1421 of 2298

1077.46
10.77
1088.23
163.23
1251.46

Amount
550.00
230.00
5.42
42.14
22.23
849.79
8.50
858.29
128.74
987.03

Amount
510.00
230.00
5.42
42.14
22.23
809.79
8.10
817.89
122.68
940.57

Amount
500.00
152.00
4.07

DSR-12

Page 1422 of 2298

42.14
22.23
720.44
7.20
727.64
109.15
836.79

Amount
490.00
152.00
4.07
42.14
22.23
710.44
7.10
717.54
107.63
825.17

Amount
480.00
152.00
4.07
42.14
22.23
700.44
7.00
707.44
106.12
813.56

Amount

DSR-12

Page 1423 of 2298

475.00
90.00
2.71
42.14
22.23
632.08
6.32
638.40
95.76
734.16

Amount
450.00
90.00
2.71
42.14
22.23
607.08
6.07
613.15
91.97
705.12

Amount
390.00
90.00
2.71
42.14
22.23
547.08
5.47
552.55
82.88
635.43

DSR-12

Page 1424 of 2298

Amount
1550.00
46.00
8.14
150.50
1754.64
17.55
1772.19
265.83
2038.02

Amount
1250.00
46.00
8.14
150.50
1454.64
14.55
1469.19
220.38
1689.57

Amount
700.00
120.00
6.59
37.63
864.22
8.64
872.86
130.93
1003.79

DSR-12

Page 1425 of 2298

Amount
580.00
120.00
6.59
37.63
744.22
7.44
751.66
112.75
864.41

Amount
450.00
120.00
4.07

37.63
611.70
6.12
617.82
92.67
710.49

Amount
360.00
120.00
4.07
24.08
508.15
5.08
513.23
76.98
590.21

DSR-12

Page 1426 of 2298

Amount
280.00
90.00
4.07

24.08
398.15
3.98
402.13
60.32
462.45

Amount
460.00
9.49
68.25
537.74
5.38
543.12
81.47
624.59

Amount
1250.00
46.00
8.14
21.07
12.35
1337.56
13.38

DSR-12

Page 1427 of 2298

1350.94
202.64
1553.58

Amount
470.00
46.00
4.07

18.06
538.13
5.38
543.51
81.53
625.04

Amount
360.00
46.00
2.71
18.06
426.77
4.27
431.04
64.66
495.70

Amount
300.00
40.00
2.71
18.06

DSR-12

Page 1428 of 2298

360.77
3.61
364.38
54.66
419.04

Amount
210.00
23.00
4.07
9.03
246.10
2.46
248.56
37.28
285.84

Amount
580.00
23.00
4.07
9.03
616.10
6.16
622.26
93.34
715.60

IS : 1868).
Amount

460.00
46.00
1.36
30.10

DSR-12

Page 1429 of 2298

537.46
5.37
542.83
81.42
624.25

oved quality).
Amount

250.00
300.00
51.17
6.78
607.95
6.08
614.03
92.10
706.13

Amount
90.00
4.07
2.13
96.20
0.96
97.16
14.57
111.73

erall thickness partition with 8.5 mm thick

Amount
10074.00
720.00
2890.80

DSR-12

Page 1430 of 2298

219.52

1056.00
180.00
77.08
313.30
81.76
669.80
88.00
14.08
77.48
193.70
1977.57
777.23
298.94
1893.26
21602.52
216.03
21818.55
3272.78
25091.33

rall thickness partition with 12.5 mm plain

Amount
7008.00
720.00
2890.80
219.52

1056.00
180.00
77.08
313.30
81.76
669.80
88.00
14.08
77.48
193.70

DSR-12

Page 1431 of 2298

1977.57
777.23
298.94
1893.26
18536.52
185.37
18721.89
2808.28
21530.17

verall thickness partition with 8 mm thick

Amount
9767.40
720.00
2890.80
219.52

1056.00
180.00
77.08
313.30
81.76
669.80
88.00
14.08
77.48
193.70
1977.57
777.23
298.94
1893.26
21295.92
212.96
21508.88
3226.33
24735.21

DSR-12

Page 1432 of 2298

erall thickness partition using 8 mm thick

Amount
9022.80
720.00
2890.80
219.52

1056.00
180.00
77.08
313.30
81.76
669.80
88.00
14.37
77.48
193.70
1977.57
777.23
298.94
1893.26
20551.61
205.52
20757.13
3113.57
23870.70

an 24 grams.
Amount
300.00
12.00
4.07
16.38
332.45
3.32
335.77
50.37
386.14

DSR-12

Page 1433 of 2298

an 24 grams.
Amount
340.00
12.00
4.07
16.38
372.45
3.72
376.17
56.43
432.60

m dia. M.S bright bar.

Amount
420.00
24.00
2.71
38.22
22.23
507.16
5.07
512.23
76.83
589.06

mm dia. M.S bright bar.

Amount
560.00
40.00
4.07
38.22
22.23
664.52
6.65
671.17

DSR-12

Page 1434 of 2298

100.68
771.85

8 mm weighing not less than 60 grams.

Amount
650.00
24.00
4.07
21.84
699.91
7.00
706.91
106.04
812.95

8 mm weighing not less than 78 grams.

Amount
800.00
32.00
4.07
27.30
863.37
8.63
872.00
130.80
1002.80

g 33 grams.
Amount
270.00
6.00
4.07
9.03
289.10

DSR-12

Page 1435 of 2298

2.89
291.99
43.80
335.79

Amount

289.80
7.20

122.14
0.39
30.17
68.25
61.75
14.97
594.67
5.95
600.62
90.09
690.71

Amount

495.36
0.69
3.00

12.92 A

DSR-12

Page 1436 of 2298

225.75
737.72
7.25
744.97
109.81
854.78

Amount
250.00

68.25
61.75
380.00
3.80
383.80
57.57
441.37

Amount
310.00
39.13
3.87
353.00
3.53
356.53
53.48
410.01

Amount
15.00
3.87
18.87
0.19

DSR-12

Page 1437 of 2298

19.06
2.86
21.92

Amount
12.00
3.87
15.87
0.16
16.03
2.40
18.43

Amount
1350.00
29.06
149.15
1528.21
15.28
1543.49
231.52
1775.01

Amount
8.00
1.55
9.55
0.10
9.65
1.45
11.10

DSR-12

Page 1438 of 2298

file size 48 x 40 mm.

Amount
710.00

43.05
37.05
6.97
797.07
7.97
805.04
120.76
925.80

Amount

675.00
43.05
37.05
6.97
762.07
7.62
769.69
115.45
885.14

Amount

4819.50

114.80
98.80
30.34
5063.44
50.63
5114.07
767.11

DSR-12

Page 1439 of 2298

5881.18

moulding edging.
Amount

5057.50

114.80
98.80
30.34
5301.44
53.01
5354.45
803.17
6157.62

ce Multi chamber extruded PVC section of

Amount

4879.00
114.80
98.80
30.34
5122.94
51.23
5174.17
776.13
5950.30

Amount

1650.00

DSR-12

Page 1440 of 2298

43.05
37.05
11.62
1741.72
17.42
1759.14
263.87
2023.01

Amount

4819.50
31.60
24.00
2.00
114.80
98.80
30.34
5121.04
51.21
5172.25
775.84
5948.09

el P.V.C. door shutter.

Amount

5759.60
31.60
24.00
2.00
114.80
98.80
30.34
6061.14
60.61
6121.75
918.26
7040.01

DSR-12

Page 1441 of 2298

Amount
1825.00

43.05
37.05
11.62
1916.72
19.17
1935.89
290.38
2226.27

or shutter.
Amount
4081.70
31.60
24.00
2.00
114.80
98.80
30.34
4383.24
43.83
4427.07
664.06
5091.13

hutter.
Amount

4700.50
31.60
24.00

DSR-12

Page 1442 of 2298

2.00
114.80
98.80
30.34
5002.04
50.02
5052.06
757.81
5809.87

mm width and 30 mm thick.

Amount

1350.00

43.05
37.05
11.62
1441.72
14.42
1456.14
218.42
1674.56

Amount
5045.60
31.60
24.00
2.00

114.80
98.80
30.34
5347.14
53.47
5400.61
810.09
6210.70

DSR-12

Page 1443 of 2298

wood grains)
Amount
5950.00
31.60
24.00
2.00

114.80
98.80
30.34
6251.54
62.52
6314.06
947.11
7261.17

Amount

57.09

32.54
33.11
34.58
6.02
163.34
1.63
164.97
24.75
189.72

rs for doors, windows: Marine plywood of

Amount

DSR-12

Page 1444 of 2298

660.00
2.71
171.57
6.59
840.87
8.41
849.28
127.39
976.67

ers for doors, windows: Fire retardant ply

Amount

688.00
2.71
171.57
6.59
868.87
8.69
877.56
131.63
1009.19

nish with high density: 1.50 mm thick.

Amount

2612.50

DSR-12

Page 1445 of 2298

290.55
150.50
123.50
77.48
3254.53
32.55
3287.08
493.06
3780.14

nish with high density: 1.00 mm thick.

Amount

1925.00
290.55
150.50
123.50
77.48
2567.03
25.67
2592.70
388.91
2981.61

Amount

1868.40
38.74
213.07
2120.21
21.20
2141.41
321.21
2462.62

DSR-12

Page 1446 of 2298

ne side decorative lamination i/c IInd Class

Amount

1914.00
44.16
162.80
43.75
150.50
123.50
21.07
273.00
2732.78
27.33
2760.11
414.02
3174.13

exterior grade-I of approved make: with

Amount

1012.00
517.00
44.16
162.80
43.75
150.50
123.50
21.07
273.00
2347.78
23.48
2371.26
355.69
2726.95

rior grade-I of approved make: With non-

DSR-12

Page 1447 of 2298

Amount

1012.00
341.00
44.16
162.80
43.75
150.50
123.50
21.07
273.00
2171.78
21.72
2193.50
329.03
2522.53

side decorative finish: 25 mm thick.

Amount

1745.90
52.00
80.00
20.25
29.06
58.11
73.71
74.10
2133.13
21.33
2154.46
323.17
2477.63

Amount

DSR-12

Page 1448 of 2298

228.80
96.85
19.37
345.02
3.45
348.47
52.27
400.74

m silicate board made with calcareous and

Amount

4543.60
766.74
240.00
79.80
126.72
30.99
26.60
77.48
38.74
1143.80
1136.20
8210.67
82.11
8292.78
1243.92
9536.70

ultipurpose cement board reinfoced with

Amount

2529.68

DSR-12

Page 1449 of 2298

766.74
240.00
79.80
126.72
30.99
26.60
77.48
38.74
1143.80
1136.20
6196.75
61.97
6258.72
938.81
7197.53

nforming to IS: 2095-1996 Part-I: 12.5 mm

Amount

1964.80
766.74
240.00
79.80
126.72
30.99
26.60
77.48
38.74
1143.80
1136.20
5631.87
56.32
5688.19
853.23
6541.42

oth directions 0.63 mm dia wire for doors,

Amount

DSR-12

Page 1450 of 2298

3700.80

1071.60
48.00
9.00
24.00
2.00
5.15
391.30
245.70
259.35
31.61
50.36
5838.87
58.39
5897.26
884.59
6781.85

e 1.4 mm in both directions 0.63 mm dia

mically treated hollock wood.

Amount

DSR-12

Page 1451 of 2298

1799.00
5.15
34.95
13.37

1071.60
48.00
9.00
24.00
2.00

391.30
245.70
259.35
31.61
50.36
3985.39
39.85
4025.24
603.79
4629.03

e 1.4 mm in both directions 0.63 mm dia

cted class sesham wood.

Amount

3341.00
5.15
34.95

1071.60

DSR-12

Page 1452 of 2298

48.00
9.00
24.00
2.00

391.30
245.70
259.35
31.61
50.36
5514.02
55.14
5569.16
835.37
6404.53

e 1.4 mm in both directions 0.63 mm dia

wood

Amount

3700.80
5.15

1071.60
138.00
25.00
93.60
7.60
391.30
245.70
259.35
31.61

DSR-12

Page 1453 of 2298

50.36
6020.07
60.20
6080.27
912.04
6992.31

e 1.4 mm in both directions 0.63 mm dia

mically treated hollock wood.

Amount

1799.00
5.15
34.95
13.37

1071.60
138.00
25.00
93.60
7.60
391.30
245.70
259.35
31.61
50.36
4166.59
41.67
4208.26
631.24
4839.50

DSR-12

Page 1454 of 2298

e 1.4 mm in both directions 0.63 mm dia

cted class sesham wood.

Amount

3341.00
5.15
34.95

1071.60
138.00
25.00
93.60
7.60
391.30
245.70
259.35
31.61
50.36
5695.22
56.95
5752.17
862.83
6615.00

e 1.4 mm in both directions 0.63 mm dia

wood

Amount

DSR-12

Page 1455 of 2298

3168.00
4.40

1071.60
48.00
9.00
24.00
2.00

361.20
218.40
247.00
30.10
50.36
5234.06
52.34
5286.40
792.96
6079.36

e 1.4 mm in both directions 0.63 mm dia

mically treated hollock wood.

Amount

1540.00
4.40
29.92
13.37

DSR-12

Page 1456 of 2298

1071.60
48.00
9.00
24.00
2.00

361.20
218.40
247.00
30.10
50.36
3649.35
36.49
3685.84
552.88
4238.72

e 1.4 mm in both directions 0.63 mm dia

cted class of sesham wood.

Amount

2860.00
4.40
29.92

1071.60
48.00
9.00
24.00

DSR-12

Page 1457 of 2298

2.00

361.20
218.40
247.00
30.10
50.36
4955.98
49.56
5005.54
750.83
5756.37

e 1.4 mm in both directions 0.63 mm dia

d

Amount

3168.00
4.40

1071.60
138.00
25.00
93.60
7.60
361.20
218.40
247.00
30.10
50.36
5415.26
54.15
5469.41
820.41
6289.82

DSR-12

Page 1458 of 2298

e 1.4 mm in both directions 0.63 mm dia

ly treated hollock wood.

Amount

1540.00
4.40
29.92
13.37

1071.60
138.00
25.00
93.60
7.60
361.20
218.40
247.00
30.10
50.36
3830.55
38.31
3868.86
580.33
4449.19

e 1.4 mm in both directions 0.63 mm dia

f sesham wood.

Amount

DSR-12

Page 1459 of 2298

2860.00
4.40
29.92

1071.60
138.00
25.00
93.60
7.60
361.20
218.40
247.00
30.10
50.36
5137.18
51.37
5188.55
778.28
5966.83

average width of aperture 1.4 mm in both

Amount

1284.40
2.71

DSR-12

Page 1460 of 2298

432.00
0.60
90.09
61.75
29.44
1900.99
19.01
1920.00
288.00
2208.00

average width of aperture 1.4 mm in both

Amount

1284.40
2.71
70.00
90.09
61.75
29.44
1538.39
15.38
1553.77
233.07
1786.84

Amount
0.00
193.70
6.30
200.00
2.00

DSR-12

Page 1461 of 2298

202.00
30.30
232.30

of vertical styles, lock rail, top rail 100mm

Amount
16975.00
268.20
14.90
17258.10
172.58
17430.68
2614.60
20045.28

h clear fire resistant glass panes 6mm thick

Amount

125928.00

6303.44
2025.00
4735.24
268.20
14.90
139274.78
1392.75
140667.53
21100.13

DSR-12

Page 1462 of 2298

161767.66

& Lock on back side of the Panic Latch

Amount
5000.00
51.17
5.42
5056.59
50.57
5107.16
766.07
5873.23

ne face and fixed on wooden /steel frame

Amount
6380.00
258.30 A
59.75
367.36
353.21
50.00
7468.62
72.10
7540.72
1092.36
8633.08

e out of single piece extruded PVC profile

Amount
2250.00

DSR-12

Page 1463 of 2298

43.05
37.05
17.36
2347.46
23.47
2370.93
355.64
2726.57

d soild PVC profiles - Non decorative finish

Amount
4969.44
31.60
24.00
2.00
114.80
98.80
45.22
5285.86
52.86
5338.72
800.81
6139.53

uded soild PVC profiles - decorative finish

Amount
6035.68
31.60
24.00
2.00
114.80
98.80
45.22
6352.10
63.52
6415.62
962.34
7377.96

DSR-12

Page 1464 of 2298

size 65 mm x 55 mm .. ..

Amount
1590.00

43.05
37.05
6.97
1677.07
16.77
1693.84
254.08
1947.92

e of PVC hollow section of size 100mm x

Amount
#REF!

114.80
98.80
30.34
#REF!
#REF!
#REF!
#REF!
#REF!

size 75mm x 53 mm, having wall thickness

Amount
#REF!

43.05
37.05

DSR-12

Page 1465 of 2298

6.97
#REF!
#REF!
#REF!
#REF!
#REF!

ade of PVC hollow extruded printed and

0.2mm) ..

Amount
#REF!

114.80
98.80
30.34
#REF!
#REF!
#REF!
#REF!
#REF!

oor made of extruded profiles - Casement

Amount
#REF!

52.50

26.25

30.10
24.70
7.45
14.90
#REF!
#REF!
#REF!
#REF!
#REF!

DSR-12

Page 1466 of 2298

oor made of extruded profiles - Casement

Amount
#REF!

52.50

26.25

30.10
24.70
7.45
14.90
#REF!
#REF!
#REF!
#REF!
#REF!

oor made of extruded profiles - Casement

Amount
#REF!

52.50

26.25

30.10
24.70
7.45
14.90
#REF!
#REF!
#REF!

DSR-12

Page 1467 of 2298

#REF!
#REF!

oor made of extruded profiles - Casement

m x 34.5mm)

Amount
#REF!

6.02
4.94
4.47
7.45
#REF!
#REF!
#REF!
#REF!
#REF!

oor made of extruded profiles - Casement

Amount
#REF!

26.25

6.02
4.94
4.47
7.45
#REF!
#REF!
#REF!
#REF!
#REF!

DSR-12

Page 1468 of 2298

oor made of extruded profiles - Casement

Amount
#REF!

52.50

30.10
24.70
7.45
14.90
#REF!
#REF!
#REF!
#REF!
#REF!

oor made of extruded profiles - Casement

mm x 75mm ) (style, rail and intermediate

Amount
262.50

52.50

30.10
24.70
7.45
14.90
392.15
3.92
396.07
59.41
455.48

DSR-12

Page 1469 of 2298

oor made of extruded profiles - Casement

Amount
81.90

26.25

6.02
4.94
4.47
7.45
131.03
1.31
132.34
19.85
152.19

door made of extruded profiles - Sliding

Amount
246.75

52.50

42.00

30.10
24.70
7.45
22.35
425.85
4.26
430.11
64.52
494.63

DSR-12

Page 1470 of 2298

door made of extruded profiles - Sliding

Amount
222.60

52.50

31.50

30.10
24.70
7.45
22.35
391.20
3.91
395.11
59.27
454.38

door made of extruded profiles - Sliding

ach shutter)( 45.5 mm x 28 mm)

Amount
47.25

15.75

15.05
12.35
4.47
7.45
102.32
1.02
103.34
15.50
118.84

DSR-12

Page 1471 of 2298

door made of extruded profiles - Sliding

Amount
81.90

26.25

6.02
4.94
4.47
7.45
131.03
1.31
132.34
19.85
152.19

or made of extruded profiles - Sliding Door

Amount
246.75

52.50

21.00

30.10
24.70
14.90
22.35
412.30
4.12
416.42
62.46
478.88

DSR-12

Page 1472 of 2298

or made of extruded profiles - Sliding Door

Amount
288.75

52.50

31.50
26.25

42.14
34.58
7.45
22.35
505.52
5.06
510.58
76.59
587.17

or made of extruded profiles - Sliding Door

45.5 mm x 28 mm)

Amount
47.25

15.75

15.05
12.35
4.47
7.45
102.32
1.02

DSR-12

Page 1473 of 2298

103.34
15.50
118.84

or made of extruded profiles - Sliding Door

Amount
81.90

26.25

6.02
4.94
4.47
7.45
131.03
1.31
132.34
19.85
152.19

with necessary stainless steel screws etc. -

Amount
2250.00
11.60
4.07
38.22
34.58
2338.47
23.38
2361.85
354.28
2716.13

DSR-12

Page 1474 of 2298

with necessary stainless steel screws etc. -

Amount
2750.00
11.60
4.07
38.22
34.58
2838.47
28.38
2866.85
430.03
3296.88

with necessary stainless steel screws etc.

Amount
3500.00
11.60
4.07
38.22
34.58
3588.47
35.88
3624.35
543.65
4168.00

h necessary stainless steel screws etc. -350

Amount
4000.00
11.60
4.07
38.22
34.58
4088.47
40.88
4129.35
619.40
4748.75

DSR-12

Page 1475 of 2298

h necessary stainless steel screws etc. -400

Amount
5000.00
11.60
4.07
38.22
34.58
5088.47
50.88
5139.35
770.90
5910.25

r uPVC casement window with necessary

Amount
1500.00
6.59
4.47
35.88
1546.94
15.47
1562.41
234.36
1796.77

w with necessary screws etc.

Amount
1000.00
6.59
4.47

DSR-12

Page 1476 of 2298

35.88
1046.94
10.47
1057.41
158.61
1216.02

Amount
500.00
6.59
4.47
35.88
546.94
5.47
552.41
82.86
635.27

e.
Amount
800.00
6.59
4.47
35.88
846.94
8.47
855.41
128.31
983.72

oor with necessary screws etc. complete.

Amount
1000.00
6.59

DSR-12

Page 1477 of 2298

4.47
35.88
1046.94
10.47
1057.41
158.61
1216.02

hollow MS tube, placed along the walls,

Amount

2940.96
400.00

99.46 A

120.40
144.69
303.81
15.60
50.00
4074.92
39.75
4114.67
602.28
4716.95

applying a priming coat of approved steel

Amount

4462.50
8.18
150.50
204.75
247.00

DSR-12

Page 1478 of 2298

62.16 A
30.80
5165.89
51.04
5216.93
773.22
5990.15

ng a priming coat steel primer ..

Amount

6800.00

2199.50

8550.00

DSR-12

Page 1479 of 2298

328.32

285.66
32.32

812.70
982.80
1404.00
889.20
114.40

117.69 A
120.29
22636.88
225.19
22862.07
3411.66
26273.73

ron diagonals 20x5mm - etc

Amount

2252.50

552.50

DSR-12

Page 1480 of 2298

2520.00
9.81
400.96
100.34
250.00

217.56 A

903.00
1806.00
1638.00
150.50
136.50
1976.00
240.58
13154.25
129.37
13283.62
1959.91
15243.53

le iron, 3mm MS gusset plates, 25mm dia

Amount

2286.20

688.50

DSR-12

Page 1481 of 2298

5907.50

467.50
16.82
400.96
240.00
249.95
400.96
20.14

372.96 A

602.00
903.00
1092.00
988.00
18.06
16.38
240.58
14911.51
145.39
15056.90
2202.59
17259.49

plates .. ..Using MS angels 40x40x6mm for

Amount

DSR-12

Page 1482 of 2298

2286.20

703.80

3978.00
12.35
140.00
440.00
60.00
249.87
400.96

319.30 A

602.00
903.00
1092.00
18.06
16.38
1235.00
240.58
12697.50
123.78
12821.28
1875.30
14696.58

al braces and central cross piece

Amount

DSR-12

Page 1483 of 2298

2286.20

935.10

2354.50

789.60
11.27
140.00
440.00
60.00
249.87
400.96

304.58 A

602.00
903.00
1092.00
18.06
16.38
1235.00
240.58
12079.10
117.75
12196.85
1783.84
13980.69

DSR-12

Page 1484 of 2298

op cover -80x1.25mm M.S. laths with 1.25

Amount
8625.00
1375.00
250.00
80.19
767.55
629.85
36.12
32.76
90.26
11886.73
118.87
12005.60
1800.84
13806.44

op cover -80x1.20mm M.S. laths with 1.20

Amount
7575.00
762.50
250.00
80.19
767.55
629.85
36.12
32.76
90.26
10224.23
102.24
10326.47
1548.97
11875.44

S. top cover -80x0.90mm M.S. laths with

Amount
6975.00
675.00
250.00

DSR-12

Page 1485 of 2298

80.19
767.55
629.85
36.12
32.76
90.26
9536.73
95.37
9632.10
1444.82
11076.92

Amount
330.00
40.10
370.10
3.70
373.80
56.07
429.87

sqm upto 16.80sqm in the area. _x000D_

Amount
520.00
20.14
540.14
5.40
545.54
81.83
627.37

qm in area.
Amount
550.00
20.14
570.14
5.70

DSR-12

Page 1486 of 2298

575.84
86.38
662.22

float glass panes with glazing clips (Only

ck

Amount

43.04 A

51.17
24.08
21.84
123.50
100.25
363.88
3.21
367.09
48.61
415.70

glass panes with glazing clips (Only labour

Amount
51.17
41.99
100.25
193.41
1.93
195.34
29.30
224.64

s, side /top /centre hung, etc., - Fixing with

Amount

DSR-12

Page 1487 of 2298

1440.00
60.15
46.41
78.26
83.98
22.90
831.30 A

50.56 B
2613.56
17.32
2630.88
262.35
2893.23

s, side /top /centre hung, etc., - Fixing with

Amount
1440.00
60.15
46.41
78.26
83.98
22.90

50.56 A
1782.26
17.32
1799.58
262.35
2061.93

Amount

DSR-12

Page 1488 of 2298

20.00
0.69
4.48
25.17
0.25
25.42
3.81
29.23

applying a priming coat of approved steel

. 1:3:6

Amount

765.00

24.60

8.40

43.04 A
48.00
53.46
26.73
7.94
27.30
45.15
49.40
13.37
1112.39
10.69
1123.08
162.01
1285.09

DSR-12

Page 1489 of 2298

applying a priming coat of approved steel

Amount

765.00

24.60
48.00
53.46
26.73
7.94
27.30
45.15
49.40
13.37
1060.95
10.61
1071.56
160.73
1232.29

g with adjustable lugs with split end tail to

Amount
1100.00

48.00
53.46

DSR-12

Page 1490 of 2298

127.50
7.94
45.15
49.40
13.37

55.74 A
1500.56
14.45
1515.01
218.89
1733.90

with carbon steel galvanised dash fastener

Amount
1100.00

-29.80
48.00
53.46

127.50
7.94
45.15
49.40
13.37

55.74 A
1470.76
14.15
1484.91
214.38
1699.29

DSR-12

Page 1491 of 2298

g with adjustable lugs with split end tail to

Amount
1200.00

48.00
53.46

127.50
7.94
45.15
49.40
13.37

55.74 A
1600.56
15.45
1616.01
234.04
1850.05

with carbon steel galvanised dash fastener

Amount
1200.00

-29.80
48.00
53.46

127.50
7.94
45.15
49.40
13.37

DSR-12

Page 1492 of 2298

55.74 A
1570.76
15.15
1585.91
229.53
1815.44

g with adjustable lugs with split end tail to

Amount
1350.00

48.00
53.46

127.50
7.94
45.15
49.40
13.37

55.74 A
1750.56
16.95
1767.51
256.77
2024.28

with carbon steel galvanised dash fastener

Amount
1350.00

-29.80
48.00

DSR-12

Page 1493 of 2298

53.46

127.50
7.94
45.15
49.40
13.37

55.74 A
1720.76
16.65
1737.41
252.25
1989.66

embedded in cement_x000D_

Amount

486.85

24.60

8.40

43.04 A

DSR-12

Page 1494 of 2298

48.00
53.46
26.73
7.94
10.92
18.06
19.76
5.42
753.18
7.10
760.28
107.59
867.87

ash fastener of required dia and size (to be

Amount

486.85

24.60
48.00
53.46
26.73
7.94
10.92
18.06
19.76
5.42
701.74
7.02
708.76
106.31
815.07

DSR-12

Page 1495 of 2298

d steel primer, - Hot finished welded type

Amount

6000.00
9.73

58.02 A

535.50

451.50
195.00
1358.50
120.29
8728.54
86.71
8815.25
1313.58
10128.83

Amount

DSR-12

Page 1496 of 2298

7250.00
9.73

58.02 A

535.50
451.50
195.00
1358.50
120.29
9978.54
99.21
10077.75
1502.96
11580.71

lded tubes.
Amount

DSR-12

Page 1497 of 2298

8125.00
9.73

58.02 A

535.50
451.50
195.00
1358.50
120.29
10853.54
107.96
10961.50
1635.52
12597.02

Amount

68.00
10.92
9.88
2.71
91.51
0.92
92.43
13.86
106.29

a MS bar

DSR-12

Page 1498 of 2298

Amount

50.00

32.80
8.19
7.41
2.71
101.11
1.01
102.12
15.32
117.44

Amount

102.60
22.50
8.19
6.78
140.07
1.40
141.47
21.22
162.69

Amount

540.00
0.78
103.74
93.86
6.78
745.16
7.45
752.61
112.89

DSR-12

Page 1499 of 2298

865.50

Amount

480.00
0.78
249.83
215.80
16.08
962.49
9.62
972.11
145.82
1117.93

Amount
1.50
0.39
1.89
0.02
1.91
0.29
2.20

Amount

13434.25

DSR-12

Page 1500 of 2298

4963.50

5383.30

1492.00
36.11
7.72
3480.00
556.85
308.75
156.00

1000.57 A
165.23
30984.28
299.84
31284.12
4542.53
35826.65

tings, frames, guard bar, ladder, railings,

Amount

609.00
344.40
1.78
90.00
210.70
123.50

DSR-12

Page 1501 of 2298

65.00
13.47 A
6.78
1464.63
14.51
1479.14
219.85
1698.99

Amount

982.08

1.60
16.99 A
108.00

72.24
222.30
31.20
18.60
1453.01
14.36
1467.37
217.56
1684.93

Amount

1208.35

1.45

DSR-12

Page 1502 of 2298

16.99 A
108.00

72.24
222.30
31.20
18.60
1679.13
16.62
1695.75
251.81
1947.56

Amount

1145.34

1.64

16.99 A
108.00

72.24
222.30
31.20
18.60
1616.31
15.99
1632.30
242.30
1874.60

er sunk head.. .. - 10 x 60 mm

Amount

DSR-12

Page 1503 of 2298

250.00
109.20
98.80
14.90
472.90
4.73
477.63
71.64
549.27

er sunk head.. .. - 10 x 80 mm

Amount
293.00
109.20
98.80
14.90
515.90
5.16
521.06
78.16
599.22

er sunk head.. .. - 10 x 120mm

Amount
364.00
136.50
123.50
14.90
638.90
6.39
645.29
96.79
742.08

er sunk head.. .. - 10 x 140 mm

DSR-12

Page 1504 of 2298

Amount
425.00
136.50
123.50
14.90
699.90
7.00
706.90
106.04
812.94

er sunk head.. .. - 10 x 160 mm

Amount
560.00
163.80
148.20
14.90
886.90
8.87
895.77
134.37
1030.14

ates etc.,
Amount

682.50
120.00

18.06
49.40
5.20
44.70
29.80
11.18
960.84
9.61

DSR-12

Page 1505 of 2298

970.45
145.57
1116.02

. Flat 15x3 mm and nuts & bolts complete -

Amount

388.70
2.71

77.28
2.71
46.41
46.41
14.82
29.44
608.48
6.08
614.56
92.18
706.74

. Flat 15x3 mm and nuts & bolts complete des

Amount

1284.40
2.71

DSR-12

Page 1506 of 2298

77.28
2.71
46.41
46.41
14.82
29.44
1504.18
15.04
1519.22
227.88
1747.10

story windows, all complete with - 4.0 mm

Amount

341.00
2.71
35.49
187.11
566.31
5.66
571.97
85.80
657.77

story windows, all complete with - 5.5 mm

Amount

DSR-12

Page 1507 of 2298

495.00
2.71
35.49
187.11
720.31
7.20
727.51
109.13
836.64

d
Amount
1638.50
131.98
1512.67
100.00
1.56
294.84
61.75
400.14
70.20
4211.64
42.12
4253.76
638.06
4891.82

d
Amount
1638.50
131.98
1226.18
100.00
1.56
294.84
61.75
400.14
70.20

DSR-12

Page 1508 of 2298

3925.15
39.25
3964.40
594.66
4559.06

Amount
1870.50
150.67
96.00
13.14
45.17

245.70
489.06
13.00
2923.24
29.23
2952.47
442.87
3395.34

Amount
280.35
93.45
31.19
199.36
15.59
850.00
13.24
218.40
345.80
270.40
9.03
24.00
60.24
2411.05
24.11
2435.16
365.27
2800.43

DSR-12

Page 1509 of 2298

t concrete 1:2:4 and top layer 12 mm thick

Amount
280.35
93.45
31.19
199.36
15.59
126.50
10.07
1055.00
100.00
17.99
90.28
4.07
586.95
395.20
464.36
70.20
80.19
3620.75
36.21
3656.96
548.54
4205.50

C 1:2:4 and top layer 12_x000D_mm thick

Amount
350.70
116.55
38.98
248.64
19.45
126.50
10.07
1215.00
100.00
20.48
90.28
4.07
586.95
459.42

DSR-12

Page 1510 of 2298

464.36
70.20
80.19
4001.84
40.02
4041.86
606.28
4648.14

eat cement. 18 mm thick.

Amount

974.20
100.00
1.56
513.24
464.36
140.40
29.44
2223.20
22.23
2245.43
336.81
2582.24

Amount
4514.03 A

95.55
44.46
13.00
29.44
4696.48
1.82
4698.30
27.64
4725.94

DSR-12

Page 1511 of 2298

Amount
98.28
88.92
20.14
207.34
2.07
209.41
31.41
240.82

thick etc. complete : Dark shade pigment

Amount

238.35
79.80
26.54
169.12
13.23
545.00
100.00
10.05
156.96
4.47
202.50
3.15
7.00
156.20
5.42
488.67
491.53
270.40
260.00
9.03
24.00
480.00
240.58
3982.00
39.82
4021.82
603.27
4625.09

DSR-12

Page 1512 of 2298

thick etc. complete : Light shade pigment

Amount
4625.10 A

198.80
-156.66

486.00
-202.50
4950.74
3.26
4954.00
49.34
5003.34

mm thick etc. complete : Medium shade

Amount
4625.10 A

170.40
-156.20

243.60
-101.50
4781.40
1.56
4782.96
23.68
4806.64

hick etc. complete : White cement without

Amount

DSR-12

Page 1513 of 2298

238.35
79.80
26.54
169.12
13.23
545.00
100.00
10.05
172.44
4.91
486.00
3.15
7.00
488.67
491.53
270.40
260.00
9.03
24.00
480.00
240.58
4119.80
41.20
4161.00
624.15
4785.15

r 34mm thick CC 1:2:4 and top layer 6mm

Amount
4625.10 A

198.80
-156.20
4667.70
0.43
4668.13
6.45
4674.58

DSR-12

Page 1514 of 2298

r 34mm thick CC 1:2:4 and top layer 6mm

Amount
4625.10 A
-156.20
-11.00
4457.90
-1.67
4456.23
-25.33
4430.90

r 3 mm thick CC 1:2:4 and top layer 9mm

Amount

220.50
73.50
24.53
156.80
12.26
502.50
100.00
9.38
252.00
7.18
289.00
4.50
12.00
222.75
8.14
488.67
491.53
270.40
260.00
9.03
24.00
480.00
200.48
4119.15
41.19
4160.34
624.05
4784.39

DSR-12

Page 1515 of 2298

r 3 mm thick CC 1:2:4 and top layer 9mm

Amount
4784.40 A

283.50
-222.75

693.60
-289.00
5249.75
4.65
5254.40
70.50
5324.90

r 3 mm thick CC 1:2:4 and top layer 9mm

ry cement.

Amount
4784.40 A

243.00
-222.75

346.80
-144.50
5006.95
2.23
5009.18
33.72
5042.90

r 3 mm thick CC 1:2:4 and top layer 9mm

DSR-12

Page 1516 of 2298

Amount

220.50
73.50
24.53
156.80
12.26
502.50
100.00
9.38
252.00
7.18
693.60
4.50
12.00
488.67
491.53
270.40
260.00
9.03
24.00
480.00
240.58
4332.96
43.33
4376.29
656.44
5032.73

r 3 mm thick CC 1:2:4 and top layer 9mm

Amount
4784.40 A

283.50
-222.75
4845.15
0.61
4845.76
9.20
4854.96

DSR-12

Page 1517 of 2298

r 3 mm thick CC 1:2:4 and top layer 9mm

Amount

220.50
73.50
24.53
156.80
12.26
502.50
100.00
9.38
252.00
7.18
289.00
4.50
12.00
488.67
491.53
270.40
260.00
9.03
24.00
480.00
200.48
3888.26
38.88
3927.14
589.07
4516.21

in cement marble powder 3:1 Dark shade

Amount

199.50
63.00
21.90
140.00
10.95
448.50
100.00
8.54
312.12
8.94
405.00
6.31

DSR-12

Page 1518 of 2298

17.00
311.85
9.30
488.67
491.53
270.40
260.00
9.03
24.00
480.00
232.63
4319.17
43.19
4362.36
654.35
5016.71

in cement marble powder 3:1 Light shade

Amount
5016.70 A

396.90
-311.85

972.00
-405.00
5668.75
6.52
5675.27
98.79
5774.06

id in cement marble powder 3:1 Medium

Amount
5016.70 A

340.20
-311.85

DSR-12

Page 1519 of 2298

486.00
-202.50
5328.55
3.12
5331.67
47.25
5378.92

laid in cement marble powder 3:1 White

Amount

199.50
63.00
21.90
140.00
10.95
448.50
100.00
8.54
344.88
9.88
972.00
6.31
17.00
488.67
491.53
270.40
260.00
9.03
24.00
480.00
200.48
4566.57
45.67
4612.24
691.84
5304.08

in cement marble powder 3:1 Light shade

Amount

DSR-12

Page 1520 of 2298

5016.70 A

396.90
-311.85
5101.75
0.85
5102.60
12.88
5115.48

id in cement marble powder 3:1 Ordinary

Amount

199.50
63.00
21.90
140.00
10.95
448.50
100.00
8.54
344.88
9.88
405.00
6.31
17.00
488.67
491.53
270.40
260.00
9.03
24.00
480.00
200.48
3999.57
40.00
4039.57
605.94
4645.51

n cement plaster 1:3 (1 cement : 3 coarse

DSR-12

Page 1521 of 2298

Amount

721.32

156.96
4.47
202.50
3.15
7.00
156.20
5.42
819.00
741.00
260.00
1820.00
300.82
5197.84
51.98
5249.82
787.47
6037.29

n cement plaster 1:3 (1 cement : 3 coarse

Amount
6037.30 A

198.80
-156.20

486.00
-202.50
6363.40
3.26
6366.66
49.40
6416.06

n cement plaster 1:3 (1 cement : 3 coarse

DSR-12

Page 1522 of 2298

Amount
6037.30 A

170.40
-156.20

243.60
-101.50
6193.60
1.56
6195.16
23.68
6218.84

(1 cement : 3 coarse sand) : White cement

Amount

721.32
172.44
4.91
486.00
3.15
7.00
819.00
741.00
260.00
1820.00
300.82
5335.64
53.36
5389.00
808.35
6197.35

3 (1 cement : 3 coarse sand) : Light shade

Amount
6037.30 A

DSR-12

Page 1523 of 2298

198.80
-156.20
6079.90
0.43
6080.33
6.45
6086.78

k in cement plaster 1:3 Ordinary cement

Amount
6037.30 A

-156.20
-11.00
5870.10
-1.67
5868.43
-25.33
5843.10

and 4 mm thick.
Amount

99.00
4.07
68.25
61.75
20.14
253.21
2.53
255.74
38.36
294.10

DSR-12

Page 1524 of 2298

Amount
81.90
74.10
74.10
230.10
2.30
232.40
34.86
267.26

nt marble powder mixture, and under layer

Amount
1181.49 A

200.00
3.11
123.50

312.00
486.00
7.00
198.80
156.96
4.47
3.15
5.42
18.69
361.20
247.00
247.00
1300.00
200.48
140.40
1200.00
6396.67
52.15
6448.82
790.10
7238.92

DSR-12

Page 1525 of 2298

white cement .
Amount

2640.00
60.24
780.73

220.00
528.00
6.85
215.60
436.80
494.00
260.00
260.00
480.00
241.35
6623.57
66.24
6689.81
1003.47
7693.28

cement mortar 1:4 Medium shade using

Amount
2420.00
60.24
780.73

330.00
264.00
6.85
184.80
436.80
494.00
260.00

DSR-12

Page 1526 of 2298

260.00
480.00
241.35
6218.77
62.19
6280.96
942.14
7223.10

nt mortar 1:4 Dark shade using ordinary

Amount
2200.00
60.24
780.73

440.00
6.85
169.40
436.80
494.00
260.00
260.00
480.00
241.35
5829.37
58.29
5887.66
883.15
6770.81

nt mortar 1:4 Ordinary cement without any

Amount
2200.00
60.24
780.73

440.00
6.85

DSR-12

Page 1527 of 2298

169.40
436.80
494.00
260.00
260.00
480.00
241.35
-325.60
5503.77
55.04
5558.81
833.82
6392.63

Amount
60.06
54.34
169.00
283.40
2.83
286.23
42.93
329.16

height on 12 mm thick cement plaster 1:3

Amount
2640.00
60.24
596.96
792.00
5.14
323.40
887.25
802.75
1976.00
240.58
8324.32
83.24
8407.56
1261.13
9668.69

DSR-12

Page 1528 of 2298

height on 12 mm thick cement plaster 1:3

Amount

2420.00
60.24
596.96
396.00
165.00
5.14
277.20
887.25
802.75
1976.00

240.58
7827.12
78.27
7905.39
1185.81
9091.20

height on 12 mm thick cement plaster 1:3

Amount
2200.00
60.24
596.96
330.00
5.14
254.10
887.25
802.75
1976.00
240.58
7353.02
73.53
7426.55

DSR-12

Page 1529 of 2298

1113.98
8540.53

height on 12 mm thick cement plaster 1:3

Amount
2200.00
60.24
596.96
330.00
254.10
5.14
887.25
802.75
1976.00
240.58
-410.30
6942.72
69.43
7012.15
1051.82
8063.97

hite cement .
Amount
3300.00
60.24
780.73
220.00
528.00
6.85
215.60
436.80
494.00
260.00
260.00
480.00
241.35
7283.57
72.84
7356.41
1103.46
8459.87

DSR-12

Page 1530 of 2298

g 50% white and 50 % ordinary cement .

Amount
2860.00
60.24
780.73

330.00
264.00
6.85
184.80
436.80
494.00
260.00
260.00
480.00
241.35
6658.77
66.59
6725.36
1008.80
7734.16

dinary cement .
Amount
2475.00
60.24
780.73

440.00
6.85
169.40
436.80
494.00
260.00
260.00
480.00
241.35

DSR-12

Page 1531 of 2298

6104.37
61.04
6165.41
924.81
7090.22

thout shade
Amount
2475.00
60.24
780.73

440.00
6.85
169.40
436.80
494.00
260.00
260.00
480.00
242.26
-325.60
5779.68
57.80
5837.48
875.62
6713.10

CM 1:4 Light shade using white cement.

Amount
5170.00
60.24
766.79
220.00
576.00
7.16
215.60
436.80
494.00
260.00

DSR-12

Page 1532 of 2298

8206.59
82.07
8288.66
1243.30
9531.96

f CM 1:4 Medium shade using 50 % white

Amount
3960.00
60.24
766.79

340.00
288.00
7.16
184.80
436.80
494.00
260.00
6797.79
67.98
6865.77
1029.87
7895.64

ed of CM 1:4 Dark shade using ordinary

Amount
2530.00
60.24
766.79

460.00
7.16
169.40
436.80
494.00
260.00
5184.39
51.84

DSR-12

Page 1533 of 2298

5236.23
785.43
6021.66

d of CM 1:4 Ordinary cement without any

Amount
2530.00
60.24
766.79

460.00
7.16
169.40
436.80
494.00
260.00
-325.60
4858.79
48.59
4907.38
736.11
5643.49

d alkali resistant tiles

Amount

624.00
9.30
41.82
60.24
16.50

63.99
-39.50
60.20
49.40
40.10

DSR-12

Page 1534 of 2298

926.05
9.26
935.31
140.30
1075.61

alkali resistant tiles

Amount

624.00
9.30
48.80

69.66
-43.00
60.24
26.73
75.25
61.75
40.10
972.83
9.73
982.56
147.38
1129.94

slurry Marble tiles (polished) Rajnagar : 8

Amount
360.74
5.81

58.04
37.77
16.50
3.10

DSR-12

Page 1535 of 2298

75.25
61.75
25.18
644.14
6.44
650.58
97.59
748.17

akrana White Second quality.

Amount

21275.00
780.73

250.00
40.10

361.20
247.00
247.00
1300.00
1200.00
200.48
25901.51
259.02
26160.53
3924.08
30084.61

Nagar Plain.
Amount

6267.50
780.73

DSR-12

Page 1536 of 2298

250.00
40.10

361.20
247.00
247.00
1300.00
1200.00
200.48
10894.01
108.94
11002.95
1650.44
12653.39

aria white.
Amount

12535.00
780.73

250.00
40.10

361.20
247.00
247.00
1300.00
1200.00
200.48
17161.51
171.62
17333.13
2599.97
19933.10

ck Zebra.

DSR-12

Page 1537 of 2298

Amount

5405.00
780.73

250.00
40.10

361.20
247.00
247.00
1300.00
1200.00
200.48
10031.51
100.32
10131.83
1519.77
11651.60

aipur green marble.

Amount

7590.00
780.73

250.00
40.10

361.20
247.00
247.00
1300.00
1200.00
200.48
12216.51
122.17
12338.68
1850.80
14189.48

DSR-12

Page 1538 of 2298

k Plain Marble.
Amount

7015.00
780.73

250.00
40.10

361.20
247.00
247.00
1300.00
1200.00
200.48
11641.51
116.42
11757.93
1763.69
13521.62

Amount
602.00
370.50
650.00
80.19
1702.69
17.03
1719.72
257.96
1977.68

Amount

DSR-12

Page 1539 of 2298

586.95
345.80
185.25
826.80
40.10
1984.90
19.85
2004.75
300.71
2305.46

ement : 4 coarse sand) : 25 mm thick.

Amount

3105.00
52.17
780.73
320.00
4.98
247.50
1200.00
327.60
247.00
247.00
1300.00
310.11
8142.09
81.42
8223.51
1233.53
9457.04

Amount

3105.00
52.17
596.96

DSR-12

Page 1540 of 2298

320.00
4.98
247.50
819.00
741.00
247.00
1820.00
260.72
8214.33
82.14
8296.47
1244.47
9540.94

e.
Amount

1705.00
50.75
782.49

933.10
286.00
135.85
70.20
16.08
3979.47
39.79
4019.26
602.89
4622.15

one.
Amount

DSR-12

Page 1541 of 2298

1870.00
50.75
782.49

933.10
286.00
135.85
70.20
16.08
4144.47
41.44
4185.91
627.89
4813.80

ointing with CM 1:2 Red sand stone.

Amount

1705.00
50.75
782.49

107.61

1173.90
286.00
345.80
143.00
40.10
4634.65
46.35
4681.00
702.15
5383.15

ointing with CM 1:2 White sand stone.

DSR-12

Page 1542 of 2298

Amount

1870.00
50.75
782.49

107.61
1173.90
286.00
345.80
143.00
40.10
4799.65
48.00
4847.65
727.15
5574.80

h joints 3mm thick, side buttered with CM

Amount

1705.00
50.75
782.49

107.61

1173.90
286.00
345.80
143.00
40.10
160.68
296.40
5091.73
50.92
5142.65
771.40
5914.05

DSR-12

Page 1543 of 2298

h joints 3mm thick, side buttered with CM

Amount

1870.00
50.75
782.49

107.61

1173.90
286.00
345.80
143.00
40.10
160.68
296.40
5256.73
52.57
5309.30
796.40
6105.70

Amount
451.50
451.50
4.52
456.02
68.40
524.42

DSR-12

Page 1544 of 2298

Amount
54.60
49.40
104.00
1.04
105.04
15.76
120.80

Amount

21463.20
3428.15
29.84
140.00
806.68
333.45
49.59
26250.91
262.51
26513.42
3977.01
30490.43

Amount

14308.80
2176.13
29.84
140.00

DSR-12

Page 1545 of 2298

650.16
266.76
40.10
17611.79
176.12
17787.91
2668.19
20456.10

Amount

162.80
0.39

2926.00
4.18
526.75
555.75
370.50
30.10
120.29
4696.76
46.97
4743.73
711.56
5455.29

Amount

510.00

DSR-12

Page 1546 of 2298

10.50
0.95
9.00
13.56
24.57
135.45
61.75
12.43 A
778.21
7.66
785.87
116.02
901.89

reen, black in skirting, risers of steps and

Amount

302.38
9.30
58.04
60.24
16.50
75.25
61.75
40.10
623.56
6.24
629.80
94.47
724.27

y, Grey, Fume Red Brown, laid on 20 mm

Amount

DSR-12

Page 1547 of 2298

369.00
9.30
83.65
30.10
16.50
60.20
49.40
40.10
658.25
6.58
664.83
99.72
764.55

ry, Grey, Fume Red brown laid on 20 mm

Amount

376.18
9.30
83.65
30.10
16.50
60.20
49.40
40.10
665.43
6.65
672.08
100.81
772.89

hite, Ivory, Grey, Fume Red Brown, laid on

Amount

522.75
9.30
83.65
20.07

DSR-12

Page 1548 of 2298

16.50
60.20
49.40
40.10
801.97
8.02
809.99
121.50
931.49

cept White, Ivory, Grey, Fume Red Brown,

Amount

548.38
9.30
83.65
20.07
16.50
60.20
49.40
40.10
827.60
8.28
835.88
125.38
961.26

the joints with white cement - Size of Tile

Amount

753.38
9.30
83.65
5.42
16.50
60.20
49.40
40.10
1017.95

DSR-12

Page 1549 of 2298

10.18
1028.13
154.22
1182.35

cement complete. Size of Tile 60x60 cm

Amount

886.63
9.30
83.65
5.42
16.50
60.20
49.40
40.10
1151.20
11.51
1162.71
174.41
1337.12

4 etc., complete. Size of Tile 80x80 cm

Amount

1096.75
9.30
83.65
3.87
16.50
60.20
49.40
40.10
1359.77
13.60
1373.37
206.01
1579.38

DSR-12

Page 1550 of 2298

on 20mm thick CM 1:4 etc., complete. Size

Amount

1670.75
9.30
83.65
3.87
16.50
60.20
49.40
40.10
1933.77
19.34
1953.11
292.97
2246.08

aying of floor tiles.

Amount
83.65
60.24
16.50
60.20
49.40
40.10
310.09
3.10
313.19
46.98
360.17

k-set tile adhesive (Water based) . ... ..

Amount
80.00

DSR-12

Page 1551 of 2298

60.24
60.20
49.40
40.10
289.94
2.90
292.84
43.93
336.77

4 coarse sand), with joints not exceeding 5

ester fibre..

Amount

487.96
182.91
185.25
239.20
13.37
200.00
3.11
123.50

156.00
92.98

104.56
73.14 A
48.76 B

361.20
247.00
247.00
140.40
100.20
3006.54
28.85
3035.39
437.02
3472.41

DSR-12

Page 1552 of 2298

Amount
1575.00

172.90
128.44
93.60
1123.95 A
10806.50
150.50
247.00
74.50
14372.39
132.48
14504.87
2007.14
16512.01

2 mm thick bed of cement mortar 1:3 - Size

Amount
753.38
9.30
58.04
5.42
16.50
75.25
61.75
40.10
1019.74
10.20
1029.94
154.49
1184.43

DSR-12

Page 1553 of 2298

2 mm thick bed of cement mortar 1:3 - Size

Amount
886.63
9.30
58.04
5.42
16.50
75.25
61.75
40.10
1152.99
11.53
1164.52
174.68
1339.20

2 mm thick bed of cement mortar 1:3 - Size

Amount
1096.75
9.30
58.04
5.42
16.50
75.25
61.75
40.10
1363.11
13.63
1376.74
206.51
1583.25

2 mm thick bed of cement mortar 1:3 - Size

DSR-12

Page 1554 of 2298

Amount
1670.75
9.30
58.04
5.42
16.50
75.25
61.75
40.10
1937.11
19.37
1956.48
293.47
2249.95

modified quick set tile adhesive (water

Amount
753.38
9.30
160.00
75.25
123.50
40.10
1161.53
11.62
1173.15
175.97
1349.12

iser of steps, laid with cement based high

Amount
886.63
9.30

DSR-12

Page 1555 of 2298

160.00
75.25
123.50
40.10
1294.78
12.95
1307.73
196.16
1503.89

iser of steps, laid with cement based high

Amount
1096.75
9.30
160.00
75.25
123.50
40.10
1504.90
15.05
1519.95
227.99
1747.94

iser of steps, laid with cement based high

Amount
1670.75
9.30
160.00
75.25
123.50
40.10
2078.90
20.79
2099.69
314.95
2414.64

DSR-12

Page 1556 of 2298

f 0.70 kg of organic coated filler of desired

Amount
105.00
30.10
24.70
7.45
167.25
1.67
168.92
25.34
194.26

f 0.70 kg of organic coated filler of desired

Amount
90.00
24.08
19.76
7.45
141.29
1.41
142.70
21.41
164.11

f 0.70 kg of organic coated filler of desired

Amount
75.00
18.06
14.82
7.45
115.33
1.15

DSR-12

Page 1557 of 2298

116.48
17.47
133.95

f 0.70 kg of organic coated filler of desired

Amount
55.00
12.04
9.88
7.45
84.37
0.84
85.21
12.78
97.99

polymer modified_x000D_

Amount
753.38
9.30
160.00
60.20
98.80
40.10
1121.78
11.22
1133.00
169.95
1302.95

h polymer modified quick set tile adhesive

Amount

DSR-12

Page 1558 of 2298

886.63
9.30
160.00
60.20
98.80
40.10
1255.03
12.55
1267.58
190.14
1457.72

h polymer modified quick set tile adhesive

Amount
1096.75
9.30
160.00
60.20
98.80
40.10
1465.15
14.65
1479.80
221.97
1701.77

h polymer modified quick set tile adhesive

Amount
1670.75
9.30
160.00
60.20
98.80
40.10
2039.15

DSR-12

Page 1559 of 2298

20.39
2059.54
308.93
2368.47

of fixing of vitrified tiles.

Amount
4.65
1.49
6.14
0.06
6.20
0.93
7.13

00mm thick with zinc coating not less than

Amount

118044.50
181.13

1768.00

7290.00
592.90
423.50
40.10
80.19

DSR-12

Page 1560 of 2298

391.30
4231.50
3828.50
172.04
0.77
308.49
279.11
75.35
412.50
10.07
690.69
624.91
47.65
56.75
139549.95
1395.50
140945.45
21141.82
162087.27

nc coating not less than 275gm/m

Amount

96526.50
148.11

DSR-12

Page 1561 of 2298

1768.00

7290.00
592.90
423.50
40.10
80.19
391.30
4231.50
3828.50
172.04
0.77
308.49
279.11
75.35
412.50
10.07
690.69
624.91
47.65
56.75
117998.93
1179.99
119178.92
17876.84
137055.76

not less than 275gm/ m

Amount

DSR-12

Page 1562 of 2298

78205.75
119.92

1768.00

7290.00
592.90
423.50
40.10
80.19
391.30
4231.50
3828.50
172.04
0.77
308.49
279.11
75.35
412.50
10.07
690.69
624.91
47.65
56.75
99649.99
996.50
100646.49
15096.97
115743.46

DSR-12

Page 1563 of 2298

1.00 mm thick.
Amount

45.15
37.05
82.20
0.82
83.02
12.45
95.47

0.80 mm thick.
Amount

36.12
29.64
65.76
0.66
66.42
9.96
76.38

0.63 mm thick.
Amount

36.12
29.64
65.76
0.66
66.42
9.96
76.38

DSR-12

Page 1564 of 2298

Amount

942.13
1546.22
2488.35
24.88
2513.23
376.98
2890.21

Amount

752.50
1235.00
1987.50
19.88
2007.38
301.11
2308.49

Amount

752.50
1235.00
1987.50
19.88
2007.38
301.11
2308.49

DSR-12

Page 1565 of 2298

Amount

2755.00
4.52

98.00
8.96
7.00
2.71
20.14
120.40
361.20
218.40
592.80
4189.13
41.89
4231.02
634.65
4865.67

Amount

2232.50
3.66

98.00
8.96
7.00
2.71
20.14
120.40
361.20

DSR-12

Page 1566 of 2298

218.40
592.80
3665.77
36.66
3702.43
555.36
4257.79

Amount

5804.50
9.34

42.00
3.84
3.00
1.36
20.14
120.40
361.20
218.40
592.80
7176.98
71.77
7248.75
1087.31
8336.06

Amount

2000.23
3.19

21.00

DSR-12

Page 1567 of 2298

2.10
1.50
0.58
16.08
150.50
445.48
273.00
741.00
3654.66
36.55
3691.21
553.68
4244.89

Amount

1502.90
2.46
314.58
40.00
300.00
21.00
10.00
4.07
7.94
150.50
123.50
18.79
84.28
252.84
169.26
414.96
3417.08
34.17
3451.25
517.69
3968.94

DSR-12

Page 1568 of 2298

Amount

1122.90
1.84
314.58
40.00
300.00
21.00
10.00
4.07
7.94
150.50
123.50
18.79
84.28
252.84
169.26
414.96
3036.46
30.36
3066.82
460.02
3526.84

Amount

59482.50

DSR-12

Page 1569 of 2298

247.94
4284.00
119.00
152.32
12.01
58.88
704.34
2549.82
2306.98
69917.79
699.18
70616.97
10592.55
81209.52

- corrugated 6mm thick sheet for chimney,

Amount

36.12
29.64
65.76
0.66
66.42
9.96
76.38

orrugated 6mm thick sheet

Amount

301.00
247.00
548.00
5.48
553.48
83.02
636.50

DSR-12

Page 1570 of 2298

Amount

2513.70
4.67
30.80
150.50
123.50
2823.17
28.23
2851.40
427.71
3279.11

d roofing accessories Corrugated serrated

Amount

4867.80
20.14
10.07
42.14
150.15
405.08
5495.38
54.95
5550.33
832.55
6382.88

DSR-12

Page 1571 of 2298

roofing accessories Plain wing adjustable

Amount

4867.80
20.14
10.07
42.14
150.15
405.08
5495.38
54.95
5550.33
832.55
6382.88

roofing accessories Close fitting adjustable

Amount

5636.40
24.02
10.65
42.14
150.15
405.08
6268.44
62.68
6331.12
949.67
7280.79

DSR-12

Page 1572 of 2298

roofing accessories Unserrated adjustable

Amount

6814.92
10.07
9.88
42.14
150.15
405.08
7432.24
74.32
7506.56
1125.98
8632.54

Corrugated Apron pieces.

Amount

4704.00
4.84
4.84
21.07
76.44
202.54
5013.73
50.14
5063.87
759.58
5823.45

DSR-12

Page 1573 of 2298

Eave's filler pieces.

Amount

3150.00
4.84
4.84
21.07
76.44
202.54
3459.73
34.60
3494.33
524.15
4018.48

North light curves.

Amount

6614.16
360.00
12.80
10.00
14.72
9.30
30.10
81.90
247.00
7379.98
73.80
7453.78
1118.07
8571.85

DSR-12

Page 1574 of 2298

Ventilator curves.
Amount

8321.04
360.00
12.80
10.00
14.72
9.30
30.10
81.90
247.00
9086.86
90.87
9177.73
1376.66
10554.39

Barge boards.
Amount

4147.50
17.50
3.20
1.25
13.95
10.07
12.04
16.38
98.80
4320.69
43.21
4363.90
654.59
5018.49

DSR-12

Page 1575 of 2298

Ridge finials.
Amount

147.00
16.08
163.08
1.63
164.71
24.71
189.42

Special North light curves.

Amount

10794.00
360.00
12.80
10.00
14.72
9.30
30.10
81.90
247.00
11559.82
115.60
11675.42
1751.31
13426.73

S type louvers.
Amount

DSR-12

Page 1576 of 2298

1312.50
16.08
120.00
90.00
4.50
10.80
4.07
19.95
301.00
247.00
36.12
2162.02
21.62
2183.64
327.55
2511.19

ers with purlins

Amount

488.46
95.00
5.70
1.55
114.38
93.86
798.95
7.99
806.94
121.04
927.98

men of grade VG - 10
Amount
629.00
36.60
14.00
1.49
67.20

DSR-12

Page 1577 of 2298

5.26
93.86
40.95
20.14
908.50
9.09
917.59
137.64
1055.23

h tile bricks of class 10 with CM 1:3 Non-

Amount

62.85
79.19

37.50
7.94
12.01
4.07
1178.00
53.26
221.55
0.15
10.07
354.90
926.25
286.00
3233.74
32.34
3266.08
489.91
3755.99

machine moulded tile bricks of class 12.5

DSR-12

Page 1578 of 2298

Amount

62.85
79.19

37.50
7.94
12.01
4.07
1406.00
53.26
221.55
0.15
10.07
354.90
926.25
286.00
3461.74
34.62
3496.36
524.45
4020.81

Amount

6.50
17.29
10.40
40.10
74.29
0.74
75.03
11.25
86.28

DSR-12

Page 1579 of 2298

FPS brick tiles

Amount
1178.00
53.26
650.12
0.13

221.13
266.76
70.20
2.71
2442.31
24.42
2466.73
370.01
2836.74

Amount
1944.00
22.43
128.96

0.25
780.73
180.60
642.20
19.37
3718.54
37.19
3755.73
563.36
4319.09

Amount

87.78
7.32
46.82

DSR-12

Page 1580 of 2298

3.66
150.00
2.34
21.00
13.83
6.50
1.51
1.37
0.96
3.68
1.94
45.15
40.95
7.55
75.25
68.25
247.00
12.01
32.69
23.25
24.95
8.58
2.52
2.13
938.99
9.39
948.38
142.26
1090.64

Amount
7.04
2.31
0.78
4.93
0.39
16.00
0.25
2.22
1.48
0.70
0.15
0.14
0.10
0.39
0.19
31.00
17.00
6.74
5.80
2.03

DSR-12

Page 1581 of 2298

0.58
3.00
0.05
2.30
1.98
0.39
20.14
128.08
1.28
129.36
19.40
148.76

R.C.C. battens : Red sand stone slab : 40 to

Amount
1815.00
98.89
33.11
27.24

436.24
473.20
375.44
78.00
24.02
3361.14
33.61
3394.75
509.21
3903.96

R.C.C. battens : White sand stone slab : 40

Amount
2035.00
98.89
33.11
436.24
473.20
375.44
78.00
24.02

DSR-12

Page 1582 of 2298

27.24
3581.14
35.81
3616.95
542.54
4159.49

mm thick
Amount
2970.00
26.15
40.10
752.50
494.00
46.29
46.29
4375.33
43.75
4419.08
662.86
5081.94

m thick
Amount
3960.00
26.15
40.10
752.50
494.00
46.29
46.29
5365.33
53.65
5418.98
812.85
6231.83

DSR-12

Page 1583 of 2298

oard 12mm thick

Amount
3465.00
26.15
40.10
752.50
494.00
46.29
46.29
4870.33
48.70
4919.03
737.85
5656.88

Amount
3575.00
22.28
40.10
752.50
494.00
46.29
46.29
4976.46
49.76
5026.22
753.93
5780.15

Amount
2002.00
22.28
40.10
752.50
494.00

DSR-12

Page 1584 of 2298

46.29
46.29
3403.46
34.03
3437.49
515.62
3953.11

k
Amount

3096.00
4.30
15.50
797.65
39.59
689.13
11.62
21.89
4675.68
46.76
4722.44
708.37
5430.81

thick
Amount

580.50
5.04
7.94
147.49
96.33
9.10
9.10
752.50
617.50
16.08

DSR-12

Page 1585 of 2298

2241.58
22.42
2264.00
339.60
2603.60

k
Amount

774.00
5.04
7.94
147.49
96.33
9.10
9.10
752.50
617.50
16.08
2435.08
24.35
2459.43
368.91
2828.34

2 mm thick
Amount

677.25
5.04
7.94
147.49
96.33
9.10
9.10
752.50
617.50
16.08

DSR-12

Page 1586 of 2298

2338.33
23.38
2361.71
354.26
2715.97

m thick
Amount

236.50
4.07
7.94
147.49
96.33
9.10
9.10
752.50
617.50
16.08
1896.61
18.97
1915.58
287.34
2202.92

mm thick
Amount

279.50
4.26
7.94
147.49
96.33
9.10
9.10
752.50
617.50
16.08

DSR-12

Page 1587 of 2298

1939.80
19.40
1959.20
293.88
2253.08

Amount
301.00
273.00
494.00
1068.00
10.68
1078.68
161.80
1240.48

excluding frame work : Flat surfaces

Amount

1425.60
4.76
39.00

459.00

879.04
17.09
4.07
481.60

DSR-12

Page 1588 of 2298

395.20

972.23
797.81
140.40
125.13
80.19
5821.12
58.21
5879.33
881.90
6761.23

Amount

1425.60
4.76
39.00

459.00

879.04
17.09
4.07
481.60
395.20
972.23
797.81
140.40
125.13
80.19
150.50
301.00
370.50
6643.12

DSR-12

Page 1589 of 2298

66.43
6709.55
1006.43
7715.98

Amount
439.52
8.54
602.00
494.00
65.00
20.14
1629.20
16.29
1645.49
246.82
1892.31

oor level
Amount
20.14
301.00
247.00
65.00
633.14
6.33
639.47
95.92
735.39

m thick
Amount

2244.00

DSR-12

Page 1590 of 2298

154.96
522.99
301.00
494.00
3716.95
37.17
3754.12
563.12
4317.24

Amount

1595.00
77.48

150.50
123.50
1946.48
19.46
1965.94
294.89
2260.83

th Type N-Normal 50 mm thick.

Amount

1430.00
6.50
19.37
150.50
123.50
1729.87
17.30
1747.17
262.08
2009.25

DSR-12

Page 1591 of 2298

ith type SE- self Extinguishing type 50 mm

Amount

1705.00
6.50
19.37
150.50
123.50
2004.87
20.05
2024.92
303.74
2328.66

Amount

330.00
20.14
20.14
109.20
98.80
7.94
586.22
5.86
592.08
88.81
680.89

Amount
85.00
10.65

DSR-12

Page 1592 of 2298

3.68
37.63
204.75
123.50
3.47
1.16
0.39
2.46
0.19
8.00
0.12
1.11
0.79
0.36
0.09
0.08
0.05
0.39
0.19
484.06
4.84
488.90
73.34
562.24

Amount
125.00
10.65
3.68
37.63
204.75
123.50
3.47
1.16
0.39
2.46
0.19
8.00
0.12
1.11
0.79
0.36
0.09
0.08
0.05

DSR-12

Page 1593 of 2298

0.39
0.19
524.06
5.24
529.30
79.40
608.70

Amount
88.20
4.40
20.14
2.13
18.06
16.38
29.64
178.95
1.79
180.74
27.11
207.85

Amount
133.20
6.80
20.14
4.07
24.08
21.84
37.05
247.18
2.47
249.65
37.45
287.10

DSR-12

Page 1594 of 2298

Amount
325.00
26.15
351.15
3.51
354.66
53.20
407.86

Amount
402.00
16.00
20.14
10.07
57.19
91.39
20.80
27.70
645.29
6.45
651.74
97.76
749.50

Amount
774.00
20.00
26.15
12.01
69.23
111.15
28.60
27.70
1068.84
10.69
1079.53

DSR-12

Page 1595 of 2298

161.93
1241.46

with seal ring : Coupler : 75 mm.

Amount
34.00
32.00
4.07
13.95
84.02
0.84
84.86
12.73
97.59

with seal ring : Coupler : 110 mm.

Amount
52.00
40.00
4.07
16.08
112.15
1.12
113.27
16.99
130.26

g with seal ring : Single pushfit coupler : 75

Amount
50.00
32.00
4.07
13.95
100.02
1.00

DSR-12

Page 1596 of 2298

101.02
15.15
116.17

ng with seal ring : Single pushfit coupler :

Amount
81.00
40.00
4.07
16.08
141.15
1.41
142.56
21.38
163.94

g with seal ring : Single tee with door: 75 x

Amount
115.00
48.00
16.03
179.03
1.79
180.82
27.12
207.94

with seal ring : Single tee with door: 110 x

Amount
180.00
60.00
20.07

DSR-12

Page 1597 of 2298

260.07
2.60
262.67
39.40
302.07

g with seal ring : Single tee without door :

Amount
95.00
48.00
16.03
159.03
1.59
160.62
24.09
184.71

g with seal ring : Single tee without door :

Amount
128.00
60.00
20.07
208.07
2.08
210.15
31.52
241.67

g with seal ring : Bend 87.5 degree: 75 mm

Amount
56.00
16.00
4.07

DSR-12

Page 1598 of 2298

13.95
90.02
0.90
90.92
13.64
104.56

with seal ring : Bend 87.5 degree: 110 mm

Amount
95.00
20.00
4.07
16.08
135.15
1.35
136.50
20.48
156.98

with seal ring : Shoe plain : 75 mm dia.

Amount
107.00
16.00
4.07
13.95
141.02
1.41
142.43
21.36
163.79

Amount
207.00
20.00
4.07
16.08

DSR-12

Page 1599 of 2298

247.15
2.47
249.62
37.44
287.06

g in C.M 1 : 4 coarse sand : For 75 mm dia.

Amount
80.00
3.68
80.00
37.63
204.75
123.50
10.65
1.36
5.81
547.38
5.47
552.85
82.93
635.78

Amount
155.00
3.68
80.00
37.63
204.75
123.50
10.65
1.36
5.81
622.38
6.22
628.60
94.29
722.89

DSR-12

Page 1600 of 2298

Amount

22.00
6.20
28.20
0.28
28.48
4.27
32.75

pressed from M.S. sheet and galvanised in

d conforming to IS: 2095, Part-I.

Amount

17417.60
9287.46
1129.68
3810.24
205.20
1171.80
432.00
288.00
560.00
501.82
821.04
177.80
1586.10
3456.00
1202.88
666.33
8491.39
7682.69
2830.46
61718.49
617.18
62335.67
9350.35
71686.02

DSR-12

Page 1601 of 2298

k made of special sections, power pressed

Amount

25799.82
9287.46
1129.68
3810.24
205.20
1171.80
432.00
288.00
560.00
501.82
821.04
177.80
1586.10
3456.00
1202.88
666.33
8491.39
7682.69
2831.01
70101.26
701.01
70802.27
10620.34
81422.61

k made of special sections, power pressed

Amount

29501.06

DSR-12

Page 1602 of 2298

9287.46
1129.68
3810.24
205.20
1171.80
432.00
288.00
560.00
501.82
821.04
177.80
1586.10
3456.00
1202.88
666.33
8491.39
7682.69
2830.46
73801.95
738.02
74539.97
11181.00
85720.97

om M.S. sheets - Fully Perforated Gypsum

Amount

100913.22
9287.46
1129.68
3810.24
205.20
1171.80
432.00
288.00
560.00
501.82

DSR-12

Page 1603 of 2298

821.04
177.80
1586.10
3456.00
1202.88
666.33
8491.39
7682.69
2830.46
145214.11
1452.14
146666.25
21999.94
168666.19

ht of 8 mm and weighing not less than 100

Amount

77.00
6.20
83.20
0.83
84.03
12.60
96.63

or L hooks, bolts & nuts 8 mm dia.: 2 mm

Amount

129339.50
154.96

1768.00

DSR-12

Page 1604 of 2298

7290.00
592.90
423.50
40.10
80.19
391.30
4231.50
3828.50
148140.45
1481.40
149621.85
22443.28
172065.13

or L hooks, bolts & nuts 8 mm dia.: 2 mm

Amount

111789.72
154.96

1768.00

7290.00
592.90
423.50
40.10
80.19
391.30
4231.50
3828.50
130590.67
1305.91
131896.58
19784.49
151681.07

DSR-12

Page 1605 of 2298

e.
Amount
1632.00
22.43
90.30
385.32
19.37
2149.42
21.49
2170.91
325.64
2496.55

eel frame.
Amount
348.00
1.68
3.01
37.05
3.87
393.61
3.94
397.55
59.63
457.18

Amount

101637.75
154.96
4284.00
119.00
152.32
12.01
58.88

DSR-12

Page 1606 of 2298

704.34
2549.82
2306.98
111980.06
1119.80
113099.86
16964.98
130064.84

Amount

10168.40
20.14
10.07
42.14
150.15
405.08
10795.98
107.96
10903.94
1635.59
12539.53

.
Amount

10168.40
4.84
4.84
21.07
76.44
202.54
10478.13
104.78
10582.91

DSR-12

Page 1607 of 2298

1587.44
12170.35

plete : North light curves.

Amount
10515.05
360.00
12.80
10.00
14.72
9.30
30.10
81.90
247.00
11280.87
112.81
11393.68
1709.05
13102.73

Amount

3844.80
17.50
3.20
1.25
13.95
10.07
12.04
16.38
98.80
4017.99
40.18
4058.17
608.73
4666.90

DSR-12

Page 1608 of 2298

Amount

10679.43
360.00
12.80
10.00
14.72
9.30
30.10
81.90
247.00
11445.25
114.45
11559.70
1733.96
13293.66

Amount

4550.00
1.55
314.58
40.00
300.00
21.00
10.00
4.07
7.94
150.50
123.50
18.79
84.28
252.84
169.26
414.96
6463.27
64.63
6527.90
979.19

DSR-12

Page 1609 of 2298

7507.09

ions.. GI Metal Ceiling Lay in plain Tegular

Amount

80940.45
5516.50
1593.00
10584.00
4998.00
504.00
432.00
216.00
3456.00
280.05
133.03
8428.00
5681.00
122762.03
1227.62
123989.65
18598.45
142588.10

ions.. GI Metal Ceiling Lay in plain Tegular

Amount

90645.30
5516.50
1593.00

DSR-12

Page 1610 of 2298

10584.00
4998.00
504.00
432.00
216.00
3456.00
280.05
133.03
8428.00
5681.00
132466.88
1324.67
133791.55
20068.73
153860.28

ections.. 12.5 mm thick square edge PVC

Amount

49140.00

5516.50
1593.00
10584.00
4998.00
504.00
432.00
216.00
3456.00
280.05
133.03
8428.00
5681.00
90961.58
909.62
91871.20
13780.68
105651.88

DSR-12

Page 1611 of 2298

sections.. 12.5 mm thick fully Perforated

Amount

50820.00

5516.50
1593.00
10584.00
4998.00
504.00
432.00
216.00
3456.00
280.05
133.03
8428.00
5681.00
92641.58
926.42
93568.00
14035.20
107603.20

m silicate false ceiling tiles ..

Amount

90090.00
5664.00

DSR-12

Page 1612 of 2298

1687.50
11319.00
5733.00
504.00
432.00
3456.00
216.00
55.00
742.99
353.85
462.94
8428.00
5681.00
134825.28
1348.25
136173.53
20426.03
156599.56

e 20x30x20 mm made of 0.5 mm thick pre

00x600mm..

Amount

93870.00
10800.00
4293.50
5412.00
220.00
484.00
968.00
2997.00
560.00
480.00
240.00
3840.00
280.12
134.10
8428.00
5681.00
138687.72

DSR-12

Page 1613 of 2298

1386.88
140074.60
21011.19
161085.79

e 20x30x20 mm made of 0.5 mm thick pre

- 0.5 mm thick with 25 mm height..

Amount

104790.00
10800.00
4293.50
5412.00
220.00
484.00
968.00
2997.00
560.00
480.00
240.00
3840.00
280.12
134.10
8428.00
5681.00
149607.72
1496.08
151103.80
22665.57
173769.37

dex) > 78, solar reflection > 0.70 and initial

Amount

DSR-12

Page 1614 of 2298

4964.60
780.73
220.00
528.00
6.85
215.60

436.80
494.00
260.00
260.00
480.00
253.27
8899.85
89.00
8988.85
1348.33
10337.18

ane foam over deck insulation conforming

Amount
40.75

461.34
26.25
10.00
29.99
15.00
66.56
20.49
32.01
25.00
120.00
80.00
927.39
9.27
936.66
140.50
1077.16

DSR-12

Page 1615 of 2298

IS: 8183 ..
Amount

2244.00
77.48

150.50
123.50
29.80
2625.28
26.25
2651.53
397.73
3049.26

Amount
427.94
192.29
185.25
239.20
18.79
1063.47
10.63
1074.10
161.12
1235.22

Amount
332.88
192.29
185.25
239.20
18.79
968.41

DSR-12

Page 1616 of 2298

9.68
978.09
146.71
1124.80

: 4 fine sand)
Amount
511.15

229.60
217.36
257.40
18.79
1234.30
12.34
1246.64
187.00
1433.64

: 6 fine sand)
Amount
397.61

229.60
217.36
257.40
18.79
1120.76
11.21
1131.97
169.80
1301.77

Amount
665.69

DSR-12

Page 1617 of 2298

269.78
251.94
286.00
18.79
1492.20
14.92
1507.12
226.07
1733.19

Amount
517.82

269.78
251.94
286.00
18.79
1344.33
13.44
1357.77
203.67
1561.44

Amount
501.90
192.29
185.25
239.20
18.79
1137.43
11.37
1148.80
172.32
1321.12

DSR-12

Page 1618 of 2298

Amount
406.84

192.29
185.25
239.20
18.79
1042.37
10.42
1052.79
157.92
1210.71

oarse sand)
Amount
599.49

229.60
217.36
257.40
18.79
1322.64
13.23
1335.87
200.38
1536.25

oarse sand)
Amount
485.95

229.60
217.36
257.40
18.79
1209.10
12.09
1221.19
183.18
1404.37

DSR-12

Page 1619 of 2298

Amount
780.73

269.78
251.94
286.00
18.79
1607.24
16.07
1623.31
243.50
1866.81

Amount
632.86

269.78
251.94
286.00
18.79
1459.37
14.59
1473.96
221.09
1695.05

: 3 fine sand)
Amount
523.00

192.29
185.25
239.20
18.79

DSR-12

Page 1620 of 2298

100.00
1.56
77.49
66.69
12.01
1416.28
14.16
1430.44
214.57
1645.01

: 4 fine sand)
Amount
427.94

192.29
185.25
239.20
18.79
100.00
1.56
77.49
66.69
12.01
1321.22
13.21
1334.43
200.16
1534.59

oat of neat cement of mix : 1:3 (1 cement:

Amount
624.69

229.60
217.36
257.40
18.79
100.00
1.56
77.49
66.69
12.01

DSR-12

Page 1621 of 2298

1605.59
16.06
1621.65
243.25
1864.90

oat of neat cement of mix : 1:4 (1 cement:

Amount
511.15

229.60
217.36
257.40
18.79
100.00
1.56
77.49
66.69
12.01
1492.05
14.92
1506.97
226.05
1733.02

. 12 mm cement plaster

Amount
596.96
192.29
185.25
239.20
18.79
100.00
1.56
77.49
66.69
12.01
1490.24
14.90
1505.14
225.77
1730.91

DSR-12

Page 1622 of 2298

. 20 mm cement plaster

Amount
928.60
269.78
251.94
286.00
18.79
100.00
1.56
77.49
66.69
12.01
2012.86
20.13
2032.99
304.95
2337.94

cement on the rough side of single or half

Amount
713.03

229.60
217.36
257.40
18.79
100.00
1.56
77.49
66.69
12.01
1693.93
16.94
1710.87
256.63
1967.50

DSR-12

Page 1623 of 2298

layer 6mm thick CP 1:6 (1 cement: 6 fine

Amount
450.71

166.44

347.27
318.63
273.00
18.79
1574.84
15.75
1590.59
238.59
1829.18

a top layer 6mm thick CP 1:3 (1 cement: 3

Amount
450.71
298.48

347.27
318.63
273.00
18.79
1706.88
17.07
1723.95
258.59
1982.54

Amount
673.72

192.29

DSR-12

Page 1624 of 2298

185.25
239.20
18.79
1309.25
13.09
1322.34
198.35
1520.69

Amount
804.72

229.60
217.36
257.40
18.79
1527.87
15.28
1543.15
231.47
1774.62

Amount
1048.01

269.78
251.94
286.00
18.79
1874.52
18.75
1893.27
283.99
2177.26

DSR-12

Page 1625 of 2298

Amount
261.50
146.37
185.25
239.20
19.95
17.43
869.70
8.70
878.40
131.76
1010.16

ck coat of Lime wash on top of walls when

Amount
261.50
146.37
185.25
239.20
19.95
17.43
100.00
1.56
77.49
66.69
12.01
2.30
3.10
0.77
18.20
17.29
4.07
1173.18
11.73
1184.91
177.74
1362.65

Amount
110.00

DSR-12

Page 1626 of 2298

1.71
77.49
66.69
12.01
267.90
2.68
270.58
40.59
311.17

ushed stone in two layers, 2mm CP 1:4 -

Amount
501.90

192.29
185.25
239.20
14.72
435.83
175.07
170.43
221.00
14.72
91.50
2.60
19.80
5.42
143.50
123.50
26.00
14.72
75.25
61.75
2714.45
27.14
2741.59
411.24
3152.83

ushed stone 6mm to 12.5mm size in two

Amount

DSR-12

Page 1627 of 2298

501.90
192.29
185.25
239.20
14.72
435.83
175.07
170.43
221.00
14.72
91.50
2.60
19.80
5.42
143.50
123.50
26.00
14.72
6.59
2584.04
25.84
2609.88
391.48
3001.36

on recommended by the manufacturers.

Amount

37.00
10.65
47.65
0.48
48.13
7.22
55.35

dditional height of 3 m or part thereof.

Amount
80.19

DSR-12

Page 1628 of 2298

57.40
74.10
26.00
10.65
248.34
2.48
250.82
37.62
288.44

Amount
57.40
49.40
10.65
117.45
1.17
118.62
17.79
136.41

Amount
86.10
74.10
19.95
180.15
1.80
181.95
27.29
209.24

Amount
861.00
494.00
247.00

DSR-12

Page 1629 of 2298

65.00
19.95
1686.95
16.87
1703.82
255.57
1959.39

Amount
1435.00
741.00
494.00
85.80
19.95
2775.75
27.76
2803.51
420.53
3224.04

Amount
215.25
182.78
40.10
438.13
4.38
442.51
66.38
508.89

Amount
229.60
197.60
50.75
477.95

DSR-12

Page 1630 of 2298

4.78
482.73
72.41
555.14

Amount
143.50
123.50
19.95
286.95
2.87
289.82
43.47
333.29

Amount

92.00
5.81
273.91
224.77
125.13
721.62
7.22
728.84
109.33
838.17

Amount
143.50
123.50
2.71

DSR-12

Page 1631 of 2298

269.71
2.70
272.41
40.86
313.27

ush Band
Amount
41.61

77.49
66.69
13.00
2.13
200.92
2.01
202.93
30.44
233.37

unk Band
Amount
41.61

86.10
74.10
13.00
3.10
217.91
2.18
220.09
33.01
253.10

aised Band
Amount
41.61

DSR-12

Page 1632 of 2298

100.45
86.45
13.00
4.07
245.58
2.46
248.04
37.21
285.25

oulded Band
Amount
41.61

186.55
160.55
13.00
2.32
404.03
4.04
408.07
61.21
469.28

sh Band
Amount
59.44

91.84
79.04
15.60
3.10
249.02
2.49
251.51
37.73
289.24

DSR-12

Page 1633 of 2298

k Band
Amount
59.44

103.32
88.92
15.60
4.07
271.35
2.71
274.06
41.11
315.17

sed Band
Amount
59.44

120.54
103.74
15.60
6.59
305.91
3.06
308.97
46.35
355.32

ulded Band
Amount
71.32

246.82
212.42
13.00
4.07
547.63
5.48
553.11
82.97

DSR-12

Page 1634 of 2298

636.08

Amount

43.82
29.72

246.82
212.42
13.00
4.07
549.85
5.50
555.35
83.30
638.65

nd) : Flush / Ruled/ Struck or weathered

Amount
108.96

143.50
148.20
241.80
10.65
21.31
674.42
6.74
681.16
102.17
783.33

Raised and cut pointing

Amount

DSR-12

Page 1635 of 2298

167.07

307.09
323.57
260.00
10.65
24.02
1092.40
10.92
1103.32
165.50
1268.82

Struck or weathered pointing

Amount
167.07
10.65
192.29
197.60
332.80
24.02
924.43
9.24
933.67
140.05
1073.72

nting
Amount
83.53
10.65
264.04
338.39
241.80
24.02
962.43
9.62
972.05
145.81

DSR-12

Page 1636 of 2298

1117.86

ointing
Amount
138.01
10.65
574.00
731.12
260.00
24.02
1737.80
17.38
1755.18
263.28
2018.46

rble dust)
Amount
288.31

10.65
574.00
731.12
260.00
24.02
1888.10
18.88
1906.98
286.05
2193.03

d pointing
Amount
66.12

DSR-12

Page 1637 of 2298

134.89
170.43
153.40
24.02
548.86
5.49
554.35
83.15
637.50

for every additional height of 3 m or part

Amount
19.95
19.95
39.90
0.40
40.30
6.05
46.35

Amount
12.30
1.36
52.00
24.70
6.59
4.07
101.02
1.01
102.03
15.30
117.33

Amount

DSR-12

Page 1638 of 2298

2.30
3.10
0.77
20.80
9.88
4.07
40.92
0.41
41.33
6.20
47.53

e coats) with a base coat of white washing

Amount
12.30
12.01
1.36
78.00
24.70
6.59
4.07
139.03
1.39
140.42
21.06
161.48

e coats) with a base coat of white washing

Amount
12.30
12.01
1.36
78.00
24.70
4.07
4.07
136.51
1.37
137.88
20.68

DSR-12

Page 1639 of 2298

158.56

g priming coat of whiting to give an even

Amount
4.00
4.07
52.50
2.32
10.65
218.40
98.80
8.02
398.76
3.99
402.75
60.41
463.16

ith cement primer.

Amount
56.00
10.65
12.01
63.00
6.59
17.43
273.00
123.50
12.01
574.19
5.74
579.93
86.99
666.92

k.

DSR-12

Page 1640 of 2298

Amount
63.00
6.59
17.24
109.20
113.62
12.01
321.66
3.22
324.88
48.73
373.61

Amount
56.00
10.65
109.20
49.40
12.01
237.26
2.37
239.63
35.94
275.57

Amount
153.60
2.32
125.58
56.81
26.00
10.65
12.01
386.97
3.87
390.84
58.63
449.47

DSR-12

Page 1641 of 2298

base coat of WP cement paint applied @

Amount
649.44
88.00
2.32
163.80
74.10
13.00
10.46
12.01
1013.13
10.13
1023.26
153.49
1176.75

Amount
217.10
88.00
2.32
163.80
74.10
13.00
10.65
12.01
580.98
5.81
586.79
88.02
674.81

uired shade New work (Two or more coats

Amount

DSR-12

Page 1642 of 2298

328.90
88.00
2.32
163.80
74.10
13.00
10.65
12.01
692.78
6.93
699.71
104.96
804.67

Amount
340.00
62.25
1.86
163.80
74.10
13.00
10.46
12.01
677.48
6.77
684.25
102.64
786.89

Amount
244.80
62.25
2.32
163.80
74.10
13.00
10.46
12.01
582.74

DSR-12

Page 1643 of 2298

5.83
588.57
88.29
676.86

Amount
244.80
85.60
2.32
163.80
74.10
13.00
10.46
12.01
606.09
6.06
612.15
91.82
703.97

Amount
63.75
4.07
0.58
68.25
61.75
7.94
16.08
222.42
2.22
224.64
33.70
258.34

od
Amount

DSR-12

Page 1644 of 2298

54.00
4.07
0.58
68.25
61.75
7.94
16.08
212.67
2.13
214.80
32.22
247.02

sed iron/steel works

Amount
36.72
0.77
65.52
59.28
16.08
178.37
1.78
180.15
27.02
207.17

second coat)
Amount
24.48
0.58 A
32.76
29.64
10.65
98.11
0.98
99.09
14.86
113.95

DSR-12

Page 1645 of 2298

and manufacture on wet or patchy portion

Amount
252.00
0.77
4.07
73.71
66.69
7.94
16.08
421.26
4.21
425.47
63.82
489.29

and manufacture on wet or patchy portion

Amount
403.20
0.77
4.07
117.39
106.21
12.71
25.72
670.07
6.70
676.77
101.52
778.29

Amount

51.00
4.07

DSR-12

Page 1646 of 2298

0.58
68.25
61.75
8.14
15.88

393.75
2.13
147.42
133.38
10.07
12.01
908.43
9.08
917.51
137.63
1055.14

ork
Amount

67.20
20.14
0.77
68.25
61.75
4.07
12.01

381.15
10.07
2.13
147.42
133.38
16.08
10.07
934.49
9.34
943.83
141.57
1085.40

DSR-12

Page 1647 of 2298

uding a coat of approved steel primer but

Amount

24.48
0.58
32.76
29.64
10.65

108.00
2.13
147.42
133.38
10.07
12.01
511.12
5.11
516.23
77.43
593.66

cetate in a litre of soft water

Amount
10.26
2.71
1.36
163.80
148.20
53.46
53.46
433.25
4.33
437.58
65.64
503.22

hydrochloric acid in a solution of 13 gms

t water

DSR-12

Page 1648 of 2298

Amount
0.42
3.54
2.60
2.71
1.36
0.20
163.80
148.20
53.46
53.46
429.75
4.30
434.05
65.11
499.16

lack anticorrosive bitumastic paint on new

Amount
36.72
0.77
65.52
59.28
16.08
80.75
2.13
147.42
133.38
7.94
12.01
7.94
91.04
660.98
6.61
667.59
100.14
767.73

lack anticorrosive bitumastic paint on new

DSR-12

Page 1649 of 2298

Amount
54.40
98.28
88.92
23.83
1.36 A
119.85
3.10
218.40
197.60
12.01
16.48
10.65
140.24
985.12
9.85
994.97
149.25
1144.22

ynthetic enamel paint new work. 100 mm

Amount

36.72
0.77
65.52
59.28
16.08
150.80
2.13
7.94
147.42
133.38
10.07
17.82
98.98
746.91
7.47
754.38
113.16
867.54

DSR-12

Page 1650 of 2298

ynthetic enamel paint new work. 150 mm

Amount

54.40
0.97
98.28
88.92
23.83
223.60
3.10
11.82
218.40
197.60
14.91
26.54
151.09
1113.46
11.13
1124.59
168.69
1293.28

Amount

70.00
0.77
40.95
37.05
6.20
5.81
160.78
1.61
162.39
24.36
186.75

DSR-12

Page 1651 of 2298

Amount
1995.00
2.13
147.42
133.38
10.07
12.01
2300.01
23.00
2323.01
348.45
2671.46

Amount
2.13
70.00
2.13
15.00
106.21
7.94
7.94
211.35
2.11
213.46
32.02
245.48

Amount
199.65
10.07
2.13
147.42
133.38
16.08
10.07
518.80
5.19
523.99
78.60

DSR-12

Page 1652 of 2298

602.59

Amount
150.80
7.94
2.13
147.42
133.38
10.07
12.01
463.75
4.64
468.39
70.26
538.65

Amount
63.75
4.07
0.58
68.25
61.75
7.94
16.08
150.80
2.13
147.42
133.38
10.07
12.01
678.23
6.78
685.01
102.75
787.76

DSR-12

Page 1653 of 2298

Amount
92.00
2.13
7.94
147.42
133.38
10.07
17.82
410.76
4.11
414.87
62.23
477.10

Amount
121.80
2.13
7.94
147.42
133.38
10.07
12.01
434.75
4.35
439.10
65.87
504.97

Amount
80.75
2.13
147.42
133.38
7.94
12.01
383.63
3.84
387.47
58.12

DSR-12

Page 1654 of 2298

445.59

Amount
177.60
2.13
7.94
147.42
133.38
10.07
12.01
490.55
4.91
495.46
74.32
569.78

Amount
45.50
4.55
145.00
2.13
7.94
245.70
222.30
10.07
10.65
693.84
6.94
700.78
105.12
805.90

Amount
45.50

DSR-12

Page 1655 of 2298

4.55
157.50
2.13
4.07
245.70
222.30
10.07
10.65
702.47
7.02
709.49
106.42
815.91

Amount
105.95
10.65
49.20
4.07
24.02
19.95
2.13
955.50
12.01
1183.48
11.83
1195.31
179.30
1374.61

Amount
87.50
0.58
218.40
197.60
6.20
10.65
520.93
5.21
526.14
78.92

DSR-12

Page 1656 of 2298

605.06

Amount
17.50
109.20
98.80
7.94
12.01
245.45
2.45
247.90
37.19
285.09

Amount

50.40
1.36
1638.00
494.00
19.95
12.01
2215.72
22.16
2237.88
335.68
2573.56

, under layer 12mm CP 1:4

Amount
501.90

192.29
185.25
239.20

DSR-12

Page 1657 of 2298

13.37
100.00
1.56
61.75

147.00
12.26
44.80
3.50
500.00
7.79
24.70
13.00
6.39
3.10
526.75
432.25
78.00
36.42
301.00
123.50
37.58
3593.36
35.93
3629.29
544.39
4173.68

Amount

37.00
0.58
40.95
37.05
4.26

210.70
172.90

DSR-12

Page 1658 of 2298

106.92
610.36
6.10
616.46
92.47
708.93

Amount

49.50
0.77
40.95
37.05
4.26

210.70
172.90
106.92
623.05
6.23
629.28
94.39
723.67

Amount
320.77
90.30
74.10
39.00
42.61
566.78
5.67
572.45
85.87
658.32

DSR-12

Page 1659 of 2298

Amount
150.50
123.50
80.19
354.19
3.54
357.73
53.66
411.39

ng providing aluminium channels

Amount

1531.20
58.08
125.58
37.05
4.26
106.92
1863.09
18.63
1881.72
282.26
2163.98

Amount
1200.00
-500.00
700.00
7.00
707.00
106.05

DSR-12

Page 1660 of 2298

813.05

r.
Amount
1186.29

344.40
296.40
18.79
1845.88
18.46
1864.34
279.65
2143.99

Amount
45.63
45.63
0.46
46.09
6.91
53.00

roved brand and manufacturer, over the

Amount
342.63

5.81
135.45
111.15

DSR-12

Page 1661 of 2298

59.60
654.64
6.55
661.19
99.18
760.37

ound ) content less than 50 grams/ litre,

- One coat

Amount
23.56
0.77
16.08
90.09
41.99
10.65
183.14
1.83
184.97
27.75
212.72

ound ) content less than 50 grams/ litre,

- Two coats

Amount
37.62
17.24
6.59
109.20
113.62
12.01
296.28
2.96
299.24
44.89
344.13

DSR-12

Page 1662 of 2298

ent less than 50 grams/ litre -One coat

Amount
106.00
0.77
7.94
98.28
88.92
12.01
10.07
323.99
3.24
327.23
49.08
376.31

ent less than 50 grams/ litre -Two coats

Amount
168.00
10.07
2.13
147.42
133.38
16.08
10.07
487.15
4.87
492.02
73.80
565.82

Organic Compound ) content less than 50

Amount
133.00
0.77

DSR-12

Page 1663 of 2298

7.94
98.28
88.92
12.01
10.07
350.99
3.51
354.50
53.18
407.68

Organic Compound ) content less than 50

Amount
210.00
10.07
2.13
147.42
133.38
16.08
10.07
529.15
5.29
534.44
80.17
614.61

ss than 150 grams/ litre - One coat

Amount
95.40
0.77
98.28
88.92
4.07
7.94
12.01
307.39
3.07
310.46
46.57

DSR-12

Page 1664 of 2298

357.03

ss than 150 grams/ litre - Two coats

Amount
151.20
2.13
7.94
147.42
133.38
10.07
12.01
464.15
4.64
468.79
70.32
539.11

nt. - With ready mixed pink or grey primer

Amount
77.25
4.07
0.58
68.25
61.75
7.94
16.08
235.92
2.36
238.28
35.74
274.02

DSR-12

Page 1665 of 2298

ontent. -With ready mixed red oxide zinc

Amount
67.50
0.77
65.52
59.28
16.08
209.15
2.09
211.24
31.69
242.93

t. -With water thinnable cement primer on

Amount
38.50
12.01
109.20
49.40
10.65
219.76
2.20
221.96
33.29
255.25

ne sand)
Amount
543.84
347.27
318.63
133.38
239.20
22.66
1604.98

DSR-12

Page 1666 of 2298

16.05
1621.03
243.15
1864.18

cement mortar 1 : 4 (1 cement : 4 coarse

Amount
637.83

347.27
318.63
133.38
239.20
22.66
1698.97
16.99
1715.96
257.39
1973.35

Amount
22.05
7.56
2.47
15.79
1.24
33.00
0.51
6.67
4.82
2.53
0.54
0.49
0.31
2.13
1.16
0.58
23.12
36.03
20.14
2.71
143.50
185.25

DSR-12

Page 1667 of 2298

4.07
516.67
5.17
521.84
78.28
600.12

Amount
14.70
5.04
1.65
10.53
0.82
22.00
0.34
4.45
3.21
1.69
0.36
0.33
0.21
1.36
0.77
0.39
13.87
14.72
1.36
94.71
123.50
316.01
3.16
319.17
47.88
367.05

Amount
7.35
2.52
0.82
5.26
0.41
11.00
0.17
2.22

DSR-12

Page 1668 of 2298

1.61
0.84
0.18
0.16
0.10
0.77
0.39
0.19
6.94
12.01
1.36
48.79
123.50
4.07
230.66
2.31
232.97
34.95
267.92

Amount
6.67
4.82
2.53
0.31
2.71
78.00
18.21
113.25
1.13
114.38
17.16
131.54

w/ clerestory window.

Amount

23.12
36.61
136.50

DSR-12

Page 1669 of 2298

296.40
98.80
5.22
596.65
5.97
602.62
90.39
693.01

ness 4 mm
Amount

341.00
2.71
20.40
7.94
10.07
62.79
56.81
2.13
503.85
5.04
508.89
76.33
585.22

Amount
495.00
2.71
20.40
7.94
10.07
62.79
56.81
2.13
657.85
6.58
664.43
99.66
764.09

DSR-12

Page 1670 of 2298

._x000D_
Amount
341.00

16.00
12.00
7.50
6.59
4.07
54.60
68.25
111.15
2.71
623.87
6.24
630.11
94.52
724.63

Amount
495.00

16.00
12.00
7.50
6.59
4.07
54.60
68.25
111.15
2.71
777.87
7.78
785.65
117.85
903.50

DSR-12

Page 1671 of 2298

Amount

341.00
4.07
14.72
7.94
81.90
74.10
2.13
525.86
5.26
531.12
79.67
610.79

Amount

495.00
4.07
14.72
7.94
81.90
74.10
2.13
679.86
6.80
686.66
103.00
789.66

Amount

82.80
40.10

DSR-12

Page 1672 of 2298

68.25
61.75
4.07
256.97
2.57
259.54
38.93
298.47

Amount

35.65
40.10
68.25
61.75
4.07
209.82
2.10
211.92
31.79
243.71

Amount

20.40
10.65
4.07
81.90
74.10
2.13
193.25
1.93
195.18
29.28
224.46

DSR-12

Page 1673 of 2298

Amount
20.40
4.07
10.65
81.90
74.10
2.13
193.25
1.93
195.18
29.28
224.46

Amount

81.90
74.10
2.13
5.81
163.94
1.64
165.58
24.84
190.42

000D_
Amount

25.20
20.14

10.65

9.03

DSR-12

Page 1674 of 2298

32.76
61.75
4.07
163.60
1.64
165.24
24.79
190.03

Amount

154.98
133.38

77.49

72.27
31.50
36.13
61.75

221.55

344.40
370.50
260.00
7.94
4.07
1775.96
17.76
1793.72
269.06
2062.78

o 50 mm thick.

DSR-12

Page 1675 of 2298

Amount

218.60
92.63
6.00
60.24
1815.00
109.80
36.60

27.24
485.03
527.80
417.43
88.40
24.02
43.80
3952.59
39.53
3992.12
598.82
4590.94

h oil type wood preserva- tive : Sal wood

Amount

15300.00
30.63

136.50
494.00
7.94
120.29
85.40
49.96
45.20
1.16
7.55
7.17
16285.80
162.86
16448.66
2467.30
18915.96

DSR-12

Page 1676 of 2298

il type wood preservative : Not exceeding

Amount

156.25
2.28
68.25
61.75

37.31
130.00
81.51

15300.00
30.63
273.00
130.00
247.00

31.85
19.11
17.29
0.19
2.71
2.71
30.80
40.10
92.50
16755.24
167.55
16922.79
2538.42
19461.21

DSR-12

Page 1677 of 2298

il type wood preservative : Not exceeding

Amount

96.88
2.28
68.25
61.75

37.31
130.00
81.51

9486.00
30.63
273.00
130.00
247.00

31.85
19.11
17.29
0.19
2.71
2.71
30.80
40.10
92.50
10881.87
108.82
10990.69
1648.60
12639.29

ype wood preservative : Above 4.00 m and

Amount

DSR-12

Page 1678 of 2298

187.50
4.99
68.25
61.75

71.75
163.80
123.50

19150.00
38.34
273.00
260.00
494.00

39.55
21.84
19.76
0.39
3.49
3.29
30.80
49.39
138.75
21204.14
212.04
21416.18
3212.43
24628.61

ype wood preservative : Above 4.00 m and

Amount

DSR-12

Page 1679 of 2298

116.25
3.75
68.25
61.75

71.75
163.80
123.50

11873.00
38.34
273.00
260.00
494.00

39.55
21.84
19.76
0.39
3.49
3.29
30.80
49.39
138.75
13854.65
138.55
13993.20
2098.98
16092.18

Amount

130.91
19.76
18.20
2.13
171.00
1.71
172.71
25.91
198.62

DSR-12

Page 1680 of 2298

pointing on tile work._x000D_

Amount

54.48
3.83
88.92
98.28
93.60
28.09
367.20
3.67
370.87
55.63
426.50

odular brick tiles._x000D_

Amount

61.74
4.33
88.92
98.28
93.60
28.09
374.96
3.75
378.71
56.81
435.52

Amount

DSR-12

Page 1681 of 2298

24.57
15.60
39.52
79.69
0.80
80.49
12.07
92.56

Amount

612.00
17.00
21.76
1.74
102.34
83.98
20.73

38.54 A

82.88 B
980.97
8.60
989.57
130.22
1119.79

Amount

DSR-12

Page 1682 of 2298

552.50
1.01
139.86 A

143.47 B
23.12
36.03
2.71
10.98 C

143.50
185.25
3.87
1242.30
9.48
1251.78
143.62
1395.40

w._x000D_
Amount

2.73
2.60
4.94
0.58

600.00

147.00

DSR-12

Page 1683 of 2298

32.40
120.00

9.03
5.20
27.17

3.42 A
2.52
957.59
9.54
967.13
144.56
1111.69

00D_
Amount

10.92
7.80
14.82
1.55

600.00

420.00
86.40
180.00

DSR-12

Page 1684 of 2298

30.10
13.00
88.92

7.04 A
7.94
1468.49
14.61
1483.10
221.41
1704.51

ns or drains and the like.

Amount

187.50
494.00
681.50
6.82
688.32
103.25
791.57

Amount

54.00
155.61
81.90
9.61
301.12
3.01
304.13
45.62
349.75
(including CP &OH)

DSR-12

Page 1685 of 2298

Amount
1432.60
75.28
115.40
4.07
108.36
98.28
338.39
52.00
2224.38
22.24
2246.62
336.99
2583.61

uperior class teak wood

Amount

4200.00
4.00
306.90
140.00
36.00

DSR-12

Page 1686 of 2298

722.40
49.14
190.19
60.24
5708.87
57.09
5765.96
864.89
6630.85

t class teak wood_x000D_

Amount

3200.00
4.00
306.90
140.00
36.00
722.40
49.14
190.19
60.24
4708.87
47.09
4755.96
713.39
5469.35

DSR-12

Page 1687 of 2298

x000D_
Amount

4515.00
393.70
140.00
36.00
9.00
2.00
4.30
525.21
62.79
190.19
60.24
5938.43
59.38
5997.81
899.67
6897.48

_
Amount

DSR-12

Page 1688 of 2298

3440.00
393.70
140.00
36.00
9.00
2.00
4.30
525.21
62.79
190.19
60.24
4863.43
48.63
4912.06
736.81
5648.87

Second class teak wood.

Amount

1296.00
1.80
2399.54 A
48.00
9.00
24.00
2.00

81.90
3862.24
14.63
3876.87
221.60
4098.47

DSR-12

Page 1689 of 2298

Amount

200.00
80.00
4.07
2.32

34.84 A
4.07
2.32
327.62
2.93
330.55
44.36
374.91

re._x000D_
Amount

240.00
80.00
4.07
2.32

34.84 A
4.07
2.32
367.62
3.33
370.95
50.42
421.37

n frames of windows &_x000D_clerestory

Amount

DSR-12

Page 1690 of 2298

1228.00

264.60
2.88
40.10
95.55
54.60
111.15
1796.88
17.97
1814.85
272.23
2087.08

Amount

15300.00
30.63
191.10
358.15
182.00
14.94 A
40.10
16116.92
161.02
16277.94
2439.45
18717.39

DSR-12

Page 1691 of 2298

Amount

9486.00
30.63
191.10
358.15
182.00
14.94 A
40.10
10302.92
102.88
10405.80
1558.63
11964.43

Amount

3000.00
160.00
5.42
120.40
49.40
3335.22
33.35
3368.57
505.29
3873.86

Amount

2500.00
160.00
5.42

DSR-12

Page 1692 of 2298

120.40
49.40
2835.22
28.35
2863.57
429.54
3293.11

Amount

1500.00
128.00
5.42
120.40
49.40
1803.22
18.03
1821.25
273.19
2094.44

Amount

5000.00
160.00
5.42
120.40
49.40
5335.22
53.35
5388.57
808.29
6196.86

DSR-12

Page 1693 of 2298

Amount

3500.00
160.00
5.42
120.40
49.40
3835.22
38.35
3873.57
581.04
4454.61

Amount

3000.00
128.00
5.42
120.40
49.40
3303.22
33.03
3336.25
500.44
3836.69

Amount

1400.00
57.00
5.42
60.20
1522.62
15.23
1537.85
230.68
1768.53

DSR-12

Page 1694 of 2298

Amount

1200.00
57.00
4.07
51.17
1312.24
13.12
1325.36
198.80
1524.16

Amount

850.00
57.00
4.07
51.17
962.24
9.62
971.86
145.78
1117.64

Amount

1600.00
64.00
4.07
21.07
9.49
1698.63
16.99
1715.62
257.34

DSR-12

Page 1695 of 2298

1972.96

Amount

700.00
1.36
18.06
719.42
7.19
726.61
108.99
835.60

Amount

675.00
1.36
18.06
694.42
6.94
701.36
105.20
806.56

Amount

625.00
1.36
18.06
644.42
6.44
650.86
97.63

DSR-12

Page 1696 of 2298

748.49

Amount

600.00
1.36
18.06
619.42
6.19
625.61
93.84
719.45

Amount

500.00
1.36
18.06
519.42
5.19
524.61
78.69
603.30

Amount

190.00
64.00
1.36
24.08
279.44
2.79
282.23

DSR-12

Page 1697 of 2298

42.33
324.56

Amount

300.00
38.00
1.36
30.10
369.46
3.69
373.15
55.97
429.12

Amount

1200.00
38.00
1.36
30.10
1269.46
12.69
1282.15
192.32
1474.47

Amount

3000.00
80.00
19.00
120.40

DSR-12

Page 1698 of 2298

49.40
3268.80
32.69
3301.49
495.22
3796.71

type).
Amount

810.00
230.00
5.42
42.14
24.70
1112.26
11.12
1123.38
168.51
1291.89

type).
Amount

675.00
152.00
5.42
42.14
24.70
899.26
8.99
908.25
136.24
1044.49

e).

DSR-12

Page 1699 of 2298

Amount

950.00
90.00
2.71
42.14
24.70
1109.55
11.10
1120.65
168.10
1288.75

type).
Amount

425.00
90.00
2.71
42.14
24.70
584.55
5.85
590.40
88.56
678.96

type).
Amount

185.00
40.00
1.36
24.08
250.44
2.50
252.94
37.94
290.88

DSR-12

Page 1700 of 2298

Amount

1450.00
9.49
68.25
1527.74
15.28
1543.02
231.45
1774.47

Amount

8.20
0.77
28.60
14.82
4.07
4.07
60.53
0.61
61.14
9.17
70.31

Amount

4.10
0.77
18.20
7.41
3.10
4.07

DSR-12

Page 1701 of 2298

37.65
0.38
38.03
5.70
43.73

Amount
22.23
9.88
10.40
4.07
2.71
49.29
0.49
49.78
7.47
57.25

Amount

35.00
1.36
7.94
90.09
41.99
6.59
182.97
1.83
184.80
27.72
212.52

Amount
42.00
0.77
16.08

DSR-12

Page 1702 of 2298

90.09
41.99
10.65
201.58
2.02
203.60
30.54
234.14

Amount
27.17
12.35
13.00
9.30
2.71
64.53
0.65
65.18
9.78
74.96

Amount

50.60
0.77
98.28
88.92
9.94
12.01
260.52
2.61
263.13
39.47
302.60

DSR-12

Page 1703 of 2298

ack anticorrosive bitumastic paint : 75 mm

Amount

27.88
0.58
49.14
44.46
12.20
62.05
1.55
111.93
101.27
6.20
9.30
6.59
60.05
493.20
4.93
498.13
74.72
572.85

ack anticorrosive bitumastic paint : 75 mm

Amount

36.55
0.58
73.71
66.69
6.20
9.30
6.59
40.10
239.72
2.40
242.12
36.32
278.44

DSR-12

Page 1704 of 2298

black anticorrosive bitumastic paint - 100

Amount

48.45
0.77
98.28
88.92
7.94
12.01
7.94
50.75
315.06
3.15
318.21
47.73
365.94

black anticorrosive bitumastic paint - 150

Amount

72.25
0.97
144.69
130.91
12.01
17.82
10.64
60.05
449.34
4.49
453.83
68.07
521.90

uminium paint : - 75mm dia pipes

Amount

DSR-12

Page 1705 of 2298

27.88
0.58
49.14
44.46
12.20
70.15
1.55
6.20
111.93
101.27
7.75
13.56
66.83
513.50
5.14
518.64
77.80
596.44

uminium paint : - 100mm dia pipes

Amount

36.72
0.77
65.52
59.28
16.08
133.40
2.13
7.94

147.42
133.38
10.07
17.82
98.98
729.51
7.30
736.81
110.52
847.33

DSR-12

Page 1706 of 2298

uminium paint : - 150mm dia pipes

Amount

54.40
0.97
98.28
88.92
23.83
197.80
3.10
11.82
218.40
197.60
14.91
26.54
151.09
1087.66
10.88
1098.54
164.78
1263.32

work : 75 mm dia. pipe .

Amount

40.25
0.58
3.10
76.44
69.16
6.20
9.30
6.59
40.10
251.72
2.52
254.24
38.14

DSR-12

Page 1707 of 2298

292.38

work : 100 mm dia. pipe.

Amount

52.90
0.77
4.07
98.28
88.92
7.94
12.01
7.94
50.75
323.58
3.24
326.82
49.02
375.84

work : 150 mm dia. pipe.

Amount

78.20
0.97
5.81
144.69
130.91
11.82
17.82
10.65
60.05
460.92
4.61
465.53
69.83
535.36

DSR-12

Page 1708 of 2298

Amount

56.70
0.77
30.03
27.17
4.07
4.07
122.81
1.23
124.04
18.61
142.65

Amount

120.45
0.00
7.94
98.28
88.92
12.01
10.07
337.67
3.38
341.05
51.16
392.21

Amount
91.00
0.77
98.28
88.92

DSR-12

Page 1709 of 2298

4.07
7.94
12.01
302.99
3.03
306.02
45.90
351.92

Amount
52.90
0.77
4.07
98.28
88.92
7.94
12.01
264.89
2.65
267.54
40.13
307.67

Amount
73.50
0.77
4.07
98.28
88.92
7.94
12.01
285.49
2.85
288.34
43.25
331.59

DSR-12

Page 1710 of 2298

Amount
48.45
0.77
98.28
88.92
7.94
12.01
256.37
2.56
258.93
38.84
297.77

Amount
63.70
26.65
1.36
16.08
0.77
480.48
12.01
601.05
6.01
607.06
91.06
698.12

Amount
43.75
0.58
109.20
98.80
6.20
6.59
265.12
2.65

DSR-12

Page 1711 of 2298

267.77
40.17
307.94

Amount

33.30
0.00
1092.00
247.00
10.65
12.01
1394.96
13.95
1408.91
211.34
1620.25

Amount
63.00
0.77
4.07
98.28
88.92
7.94
12.01
274.99
2.75
277.74
41.66
319.40

Amount

DSR-12

Page 1712 of 2298

26.00
12.01
38.01
0.38
38.39
5.76
44.15

Amount
27.00
12.01
39.01
0.39
39.40
5.91
45.31

One or more coats on old work.

Amount
42.00
0.77
16.03
60.06
54.34
10.65
183.85
1.84
185.69
27.85
213.54

ed @ 2.20Kg/10Sqm) over & i/c primer @

Amount
88.00
50.40

DSR-12

Page 1713 of 2298

2.32
125.58
56.81
13.00
10.65
12.01
358.77
3.59
362.36
54.35
416.71

re coats @ 2.20 kg/10 sqm) complete

Amount
88.00
1.64
95.55
29.64
13.00
4.69
12.01
244.53
2.45
246.98
37.05
284.03

surface applied @ 3.28 Kg/10 Sqm).

Amount
649.44
2.32
125.58
56.81
10.65
12.01
856.81
8.57
865.38
129.81
995.19

DSR-12

Page 1714 of 2298

qm).
Amount
360.36
0.77
90.09
41.99
10.65
12.01
515.87
5.16
521.03
78.15
599.18

ed @ 1.67 Ltr/10Sqm) on existing cement

Amount
217.10
1.36
125.58
56.81
7.17
7.94
415.96
4.16
420.12
63.02
483.14

@ 0.90 Ltr./10 Sqm).

Amount
117.00
0.77
90.09
41.99

DSR-12

Page 1715 of 2298

10.65
12.01
272.51
2.73
275.24
41.29
316.53

oats applied @ 1.43 Ltr/10Sqm) on existing

Amount
328.90
1.55
125.58
56.81
10.65
12.01
535.50
5.36
540.86
81.13
621.99

ats) applied @ 0.83 Ltr./10 Sqm).

Amount
190.90
1.36
90.09
41.99
10.65
12.01
347.00
3.47
350.47
52.57
403.04

DSR-12

Page 1716 of 2298

Amount
87.50
0.77
4.07
98.28
88.92
7.94
4.07
291.55
2.92
294.47
44.17
338.64

Amount
93.75
0.77
4.07
98.28
88.92
4.07
6.20
296.06
2.96
299.02
44.85
343.87

Amount

162.50
195.00
6.59
95.55
86.45
6.59
552.68
5.53

DSR-12

Page 1717 of 2298

558.21
83.73
641.94

Amount
45.50
4.07
2.71
36.03
98.28
88.92
275.51
2.76
278.27
41.74
320.01

ht made with 40 mm dia. MS tube 1.50 m

Amount
7820.65

471.42
4665.50
7657.00
1542.15
22156.72
221.57
22378.29
3356.74
25735.03

DSR-12

Page 1718 of 2298

ndows/ ventilators with necessary welding

Amount
450.00
187.11
5.42
642.53
6.43
648.96
97.34
746.30

ators with necessary welding and machine

Amount
170.00
187.11
5.42
362.53
3.63
366.16
54.92
421.08

Amount
108.68
91.39
1.55
201.62
2.02
203.64
30.55
234.19

DSR-12

Page 1719 of 2298

Amount
392.73
177.84
7.17
577.74
5.78
583.52
87.53
671.05

Amount
217.36
135.85
2.91
356.12
3.56
359.68
53.95
413.63

Amount
654.55
177.84
10.46
842.85
8.43
851.28
127.69
978.97

Amount
523.64
222.30
6.97
752.91
7.53

DSR-12

Page 1720 of 2298

760.44
114.07
874.51

Amount

136.50
123.50
19.95
279.95
2.80
282.75
42.41
325.16

Amount

68.25
123.50
19.95
211.70
2.12
213.82
32.07
245.89

Amount
74.10
91.39
1.55
167.04
1.67

DSR-12

Page 1721 of 2298

168.71
25.31
194.02

Amount
306.28
113.62
1.55
421.45
4.21
425.66
63.85
489.51

Amount
108.68
91.39
1.55
201.62
2.02
203.64
30.55
234.19

Amount
261.82
222.30
3.68
487.80
4.88
492.68
73.90
566.58

DSR-12

Page 1722 of 2298

Amount
592.80
395.20
109.20
2.71
1099.91
11.00
1110.91
166.64
1277.55

- From brick work in lime mortar

Amount
691.60
345.80
218.40
13.37
1269.17
12.69
1281.86
192.28
1474.14

Amount
864.50
370.50
338.52
12.01
1585.53
15.86
1601.39
240.21
1841.60

DSR-12

Page 1723 of 2298

Amount
150.67
121.03
2.91
274.61
2.75
277.36
41.60
318.96

Amount
321.10
256.88
4.07
582.05
5.82
587.87
88.18
676.05

: In lime mortar.
Amount
192.66
150.67
4.07
347.40
3.47
350.87
52.63
403.50

: In cement mortar.
Amount
382.85

DSR-12

Page 1724 of 2298

293.93
4.07
680.85
6.81
687.66
103.15
790.81

Amount
13.65
49.40
49.40
0.77
113.22
1.13
114.35
17.15
131.50

Amount
13.65
98.80
49.40
1.36
163.21
1.63
164.84
24.73
189.57

Amount
27.30
44.46
13.65
2.13
87.54

DSR-12

Page 1725 of 2298

0.88
88.42
13.26
101.68

Amount
35.49
61.75
19.11
4.07

120.42
1.20
121.62
18.24
139.86

Amount

13.65
19.76
0.77
34.18
0.34
34.52
5.18
39.70

Amount
19.11
24.70
1.36
45.17
0.45
45.62

DSR-12

Page 1726 of 2298

6.84
52.46

Amount
546.00
494.00
19.95
1059.95
10.60
1070.55
160.58
1231.13

Amount

21.84
19.76
0.77
42.37
0.42
42.79
6.42
49.21

Amount

54.60
74.10
19.95
148.65
1.49
150.14
22.52
172.66

DSR-12

Page 1727 of 2298

Amount

1.64
1.98
0.58
4.20
0.04
4.24
0.64
4.88

Amount

68.25
123.50
19.95
211.70
2.12
213.82
32.07
245.89

Amount

2.73
4.94
0.58
8.25
0.08
8.33
1.25
9.58

DSR-12

Page 1728 of 2298

Amount

13.65
26.00
37.05
4.07
80.77
0.81
81.58
12.24
93.82

Amount
13.65
13.00
24.70
4.07
55.42
0.55
55.97
8.40
64.37

Amount

40.95
26.00
61.75
6.20
134.90
1.35
136.25
20.44
156.69

DSR-12

Page 1729 of 2298

Amount

26.00
61.75
4.07
91.82
0.92
92.74
13.91
106.65

Amount

5.20
14.82
0.58
20.60
0.21
20.81
3.12
23.93

ht of one metre or part thereof beyond 5

Amount

5.20
14.82
0.58
20.60
0.21
20.81
3.12
23.93

DSR-12

Page 1730 of 2298

Amount

60.20
49.40
109.60
1.10
110.70
16.61
127.31

Amount

81.90
29.64
59.28
4.07
174.89
1.75
176.64
26.50
203.14

Amount
161.07
44.46
59.28
4.07
268.88
2.69
271.57
40.74
312.31

DSR-12

Page 1731 of 2298

Amount
61.75
247.00
4.07
312.82
3.13
315.95
47.39
363.34

Amount
437.19
185.25
12.01
634.45
6.34
640.79
96.12
736.91

Amount
147.42
39.52
59.28
3.68
249.90
2.50
252.40
37.86
290.26

Amount
61.75

DSR-12

Page 1732 of 2298

153.14
1.55
216.44
2.16
218.60
32.79
251.39

Amount
136.50
247.00
10.07
393.57
3.94
397.51
59.63
457.14

Amount
54.60
123.50
7.94
186.04
1.86
187.90
28.19
216.09

Amount
437.19
185.25
12.01
634.45
6.34
640.79
96.12

DSR-12

Page 1733 of 2298

736.91

Amount
293.93
298.87
12.01
604.81
6.05
610.86
91.63
702.49

Amount
427.31
61.75
12.01
501.07
5.01
506.08
75.91
581.99

Amount
133.38
5.42
138.80
1.39
140.19
21.03
161.22

DSR-12

Page 1734 of 2298

Amount
123.50
123.50
0.77
247.77
2.48
250.25
37.54
287.79

Amount

26.43
16.55
0.39

19.95
2.13
65.45
0.65
66.10
9.92
76.02

Amount

23.96
14.82
0.39
19.95
12.01
4.07
75.20
0.75
75.95
11.39
87.34

DSR-12

Page 1735 of 2298

Amount
4.07
2.13
6.20
0.06
6.26
0.94
7.20

Amount

864.50
7.94
872.44
8.72
881.16
132.17
1013.33

Amount
27.30
61.75
61.75
4.07
154.87
1.55
156.42
23.46
179.88

DSR-12

Page 1736 of 2298

Amount
27.30
98.80
49.40
6.20
181.70
1.82
183.52
27.53
211.05

Amount
40.95
49.40
49.40
7.94
147.69
1.48
149.17
22.38
171.55

Amount
54.60
61.75
61.75
10.07
188.17
1.88
190.05
28.51
218.56

Amount
54.60

DSR-12

Page 1737 of 2298

74.10
74.10
19.95
222.75
2.23
224.98
33.75
258.73

0 mm.
Amount
54.60
494.00
123.50
19.95
692.05
6.92
698.97
104.85
803.82

40 mm upto 75 mm.

Amount
81.90
741.00
185.25
28.09
1036.24
10.36
1046.60
156.99
1203.59

Amount
54.60
74.10
7.94

DSR-12

Page 1738 of 2298

136.64
1.37
138.01
20.70
158.71

Amount
88.92
88.92
1.36
179.20
1.79
180.99
27.15
208.14

Amount
88.92
93.86
2.32
185.10
1.85
186.95
28.04
214.99

Amount
88.92
98.80
3.10
190.82
1.91
192.73
28.91
221.64

DSR-12

Page 1739 of 2298

Amount

1185.60
592.80
133.65
1912.05
19.12
1931.17
289.68
2220.85

Amount

2371.20
1185.60
160.38
3717.18
37.17
3754.35
563.15
4317.50

Amount

163.02
163.02
53.46
379.50

DSR-12

Page 1740 of 2298

3.80
383.30
57.50
440.80

Amount

163.02
163.02
106.83
432.87
4.33
437.20
65.58
502.78

Amount

2114.71 A
1355.05 B
207.00
11.40
171.99
1111.50
80.19
5051.84
15.82
5067.66
239.69
5307.35

DSR-12

Page 1741 of 2298

Amount

2257.26 A
1446.39 B
463.50
34.20
354.90
1852.50
120.29
6529.04
28.25
6557.29
428.05
6985.34

Amount

2403.74 A
1540.24 B
630.00
68.10
614.25
2840.50
200.48
8297.31
43.53
8340.84
659.53
9000.37

DSR-12

Page 1742 of 2298

Amount

1314.04
1348.62
80.60
630.00
68.10
614.25
2840.50
200.48
7096.59
70.97
7167.56
1075.13
8242.69

Amount

3907.54
4013.75
241.80
1386.00
150.00
2730.00
4940.00
267.31
17636.40
176.36
17812.76
2671.91
20484.67

DSR-12

Page 1743 of 2298

Amount

286.52
293.93
18.20
88.92
93.86
2.32
783.75
7.84
791.59
118.74
910.33

Amount

306.28
316.16
18.20
88.92
217.36
5.62
952.54
9.53
962.07
144.31
1106.38

Amount

DSR-12

Page 1744 of 2298

123.50
34.58
1.94
10.65
170.67
1.71
172.38
25.86
198.24

Amount

71.63
19.76
0.97
7.94
100.30
1.00
101.30
15.20
116.50

Amount

200.07
125.97

DSR-12

Page 1745 of 2298

2.71
39.52
17.29
0.77
75.25
36.12
32.76
260.00
247.00
80.19
1117.65
11.18
1128.83
169.32
1298.15

Amount

34.58
22.23
0.39
61.75
54.34
0.77
32.11
14.82
0.58
10.65
232.22
2.32
234.54
35.18
269.72

Amount
75.25
123.50
26.73

DSR-12

Page 1746 of 2298

225.48
2.25
227.73
34.16
261.89

Amount
180.60
109.20
395.20
133.65
818.65
8.19
826.84
124.03
950.87

Amount

722.40
420.42
1580.80
133.65
2857.27
28.57
2885.84
432.88
3318.72

Amount
451.50
273.00
988.00

DSR-12

Page 1747 of 2298

1712.50
17.13
1729.63
259.44
1989.07

m (outside to outside).

Amount

46.93
29.64
0.58
86.45
74.10
1.36
14.82
7.41
0.19
261.48
2.61
264.09
39.61
303.70

m (outside to outside).

Amount

DSR-12

Page 1748 of 2298

76.57
46.93
0.97
123.50
103.74
1.94
32.11
14.82
0.58
401.16
4.01
405.17
60.78
465.95

- 320 x 120 cm (outside to outside)

Amount

108.68
69.16
1.36
170.43
145.73
2.32
46.93
22.23
0.77
567.61
5.68
573.29
85.99
659.28

DSR-12

Page 1749 of 2298

Amount
88.92
19.76
18.20
2.13
129.01
1.29
130.30
19.55
149.85

Amount
54.60
74.10
8.02
136.72
1.37
138.09
20.71
158.80

.
Amount
7.80
130.00
123.50
136.50
123.50
225.00
67.50
112.50
926.30
9.26
935.56
140.33
1075.89

DSR-12

Page 1750 of 2298

Amount
2.60
74.10
64.13
2.70
143.53
1.44
144.97
21.75
166.72

ls by mechanical means, including loading,

ds including all lifts involved.

Amount
87.60
87.60
0.88
88.48
13.27
101.75

Amount

468.00
4446.00
66.69
81.00
13.34
40.13
2.13
10.07

DSR-12

Page 1751 of 2298

81.00
13.34
40.13
2.13
10.07
5274.03
52.74
5326.77
799.02
6125.79

.
Amount

44.20

12.00
1.98
5.95
0.58
2.13
66.84
0.67
67.51
10.13
77.64

Amount
75.00
487.50
212.50
95.22
870.22
8.70
878.92
131.84
1010.76

DSR-12

Page 1752 of 2298

Amount
75.00
552.50
225.00
95.22
947.72
9.48
957.20
143.58
1100.78

Amount
42.50
270.00
617.50
95.22
1025.22
10.25
1035.47
155.32
1190.79

Amount
330.00
95.22
425.22
4.25
429.47
64.42
493.89

DSR-12

Page 1753 of 2298

Amount
360.00
95.22
455.22
4.55
459.77
68.97
528.74

Amount
52.50
840.00
172.50
87.60
1152.60
11.53
1164.13
174.62
1338.75

Amount
105.00
862.50
172.50
74.46
13.14
1227.60
12.28
1239.88
185.98
1425.86

Amount

DSR-12

Page 1754 of 2298

900.00
87.60
987.60
9.88
997.48
149.62
1147.10

Amount
43.72
41.25
30.00
109.50
224.47
2.24
226.71
34.01
260.72

Amount
450.00
87.60
537.60
5.38
542.98
81.45
624.43

dam specifications i/c spreading in uniform

Amount
64.22
64.22
67.60

49.50
8.15

DSR-12

Page 1755 of 2298

24.36
2.13
4.07
284.25
2.84
287.09
43.06
330.15

nt (Jhama) brick agg. 120 mm to 40 mm.

Amount
86.45
64.22
46.80

6.00
0.99
2.97
0.58
4.07
212.08
2.12
214.20
32.13
246.33

nt (Jhama) brick agg. 90 mm to 45 mm.

Amount
86.45
64.22
46.80

6.00
0.99
2.97
0.58
4.07
212.08
2.12
214.20
32.13

DSR-12

Page 1756 of 2298

246.33

er.
Amount

540.00
52.56

133.38
140.40

81.00
13.34
40.13
2.13
1002.94
10.03
1012.97
151.95
1164.92

n 75.
Amount
464.00
37.38
51.17
46.41
86.45
26.73
13.37
725.51
7.26
732.77
109.92
842.69

DSR-12

Page 1757 of 2298

75.
Amount
142.10
11.45
12.04
10.92
22.23
6.20
204.94
2.05
206.99
31.05
238.04

Amount
333.45
266.76

198.00
32.60
98.11
2.13
8.14
939.19
9.39
948.58
142.29
1090.87

Amount

970.13 A

DSR-12

Page 1758 of 2298

3675.00
714.15

1376.52 B

749.32 C

481.65
649.61
351.00
202.50
33.35
100.33
16.08
30.02
81.00
13.34
40.13
0.82
9484.95
63.89
9548.84
967.93
10516.77

Amount

945.00
393.24
325.08
294.84
531.05
397.67
10.07
2896.95
28.97
2925.92
438.89
3364.81

bricks with class designation 75.

DSR-12

Page 1759 of 2298

Amount
1870.50
150.67
120.40
109.20
266.76
2517.53
25.18
2542.71
381.41
2924.12

Amount

107.17 A
26.38 B
13.74 C
96.60
8.06
407.00
0.96

237.12
118.56
59.28
59.28

175.37
118.56
26.00

118.56
118.56
60.24
1751.44

DSR-12

Page 1760 of 2298

16.04
1767.48
243.03
2010.51

Amount

107.17 A

26.38 B
13.74 C

118.56
59.28
59.28
59.28

118.56
118.56
26.00
80.19
787.00
6.40
793.40
96.92
890.32

Amount

93.10
18.09

DSR-12

Page 1761 of 2298

68.83 A
37.47 B

395.20
197.60
810.29
7.04
817.33
106.65
923.98

gs or 6 mm bar nibs wherever required.

Amount

1648.07 A

8.40
17.42
3.91
3.55
3.38

1537.49 B

DSR-12

Page 1762 of 2298

1166.49 C

250.00
3.89
44.80
6.13
12.35
5.20
183.68
197.60
70.20
2.91
19.76
17.24
80.19
18.21
20.14
5321.01
9.69
5330.70
146.80
5477.50

Amount

11610.00
16.23
11626.23
116.26
11742.49
1761.37
13503.86

Amount
15.00
70.00
4.07

DSR-12

Page 1763 of 2298

27.30
116.37
1.16
117.53
17.63
135.16

th horizontal lines &2 diagonals of barbed

Amount

1604.25
2.33
73.61
36.12
32.76
123.50
150.50
136.50
20.14
2179.71
21.80
2201.51
330.23
2531.74

part provided with 6 horizo- ntal lines and

eparately) : With G.I. barbed wi

Amount

1604.25
2.41

DSR-12

Page 1764 of 2298

1351.60 A
73.61

36.12
32.76
123.50
150.50
136.50
3511.25
21.60
3532.85
327.19
3860.04

Amount

4462.50
8.18
204.75
123.50
273.00
247.00
29.44
5348.37
53.48
5401.85
810.28
6212.13

gn.(cost of posts, welded steel wire fabric,

Amount

36.12
32.76
123.50
150.50
136.50

DSR-12

Page 1765 of 2298

80.19
80.19
639.76
6.40
646.16
96.92
743.08

Amount

114.38
10.07
124.45
1.24
125.69
18.85
144.54

Amount
60.00
29.64
6.20
95.84
0.96
96.80
14.52
111.32

e.
Amount

DSR-12

Page 1766 of 2298

98.10 A

0.49
1.04
0.24
0.22
0.21

74.94 B

83.44 C

9.00
0.14
24.64
3.37
0.67
0.05
0.15
0.07
7.46
9.39
11.96
1.01
0.89
29.64
6.20
363.32
1.07
364.39
16.19
380.58

finishing smooth in 1 : 3. 35 x 111 x 25 cm

Amount

DSR-12

Page 1767 of 2298

490.50 A

2.47
5.20
1.20
1.09
1.04

273.06 B

181.90 C

270.00
4.20
7.04
0.96
1.98
0.18
0.04
0.19
21.53
27.42
35.36
2.91
2.71
49.40
20.14
1400.52

DSR-12

Page 1768 of 2298

4.55
1405.07
68.94
1474.01

finishing smooth in 1 : 3. 50 x 152.52 x 25

Amount

931.94 A

4.69
9.88
2.41
2.18
2.08

518.31 B

287.03 C

450.00
7.01
128.00
17.52
3.21

DSR-12

Page 1769 of 2298

0.26
0.77
0.39
36.16
45.70
59.02
5.04
4.26
49.40
20.14
2585.40
8.48
2593.88
128.49
2722.37

inishing smooth in 1 : 3. 35 x 93.5 x 18 cm

Amount

294.30 A

1.48
3.12
0.72
0.66
0.62

163.50 B

135.17 C

DSR-12

Page 1770 of 2298

210.00
3.27
5.76
0.79
1.48
0.16
0.39
0.19
16.65
21.24
27.30
2.32
1.94
24.70
20.14
935.90
3.43
939.33
51.95
991.28

Sqm with 1.65 Cum of stone chipping 13.2

Amount
8325.00
19.71

1732.50
144.54
180.00
4.50

28.60
345.80
345.80
24.08
28.60
229.71
28.60
229.71
382.85
66.69

DSR-12

Page 1771 of 2298

28.60
165.00
96.00
33.00
82.58
4.07
2.20
5.76
10.07
10.07
12554.04
125.54
12679.58
1901.94
14581.52

Amount

15.77
1575.00

131.40
144.00
3.60

345.80

24.08
28.60
340.86

70.20
209.95
6660.00
209.95
165.00
27.17

DSR-12

Page 1772 of 2298

96.00
28.60
33.00
82.58
2.20
5.76
4.07
4070.00
1050.00
9.64
87.60
10.07
88.00
24.41
2.20
90.00
21.00
44.59
48.00
0.60
1.62
345.80
15.60
239.59
28.60
15.05
18.20
185.25
18.20
153.14
153.14
37.05
15.60
2.13
14.14
16992.81
169.93
17162.74
2574.41
19737.15

Amount
7215.00
1575.00
17.08
131.40
156.00
3.90

DSR-12

Page 1773 of 2298

15.60
121.03
239.59
15.05
15.60
170.43
171.60
125.97
125.97
37.05
15.60
90.00
44.59
2.13
18.00
48.00
1.00
2.16
4.07
7.94
10369.76
103.70
10473.46
1571.02
12044.48

0 % bitumen content-RS grade conforming

Amount
5557.50
17.08
1575.00
131.40

28.60
345.80
345.80
21.07
26.00
247.00
28.60
209.95

DSR-12

Page 1774 of 2298

209.95
66.69
70.20
165.00
30.00
82.58
4.07
2.20
5.76
10.07
14.14
9194.46
91.94
9286.40
1392.96
10679.36

0 % bitumen content-RS grade conforming

Amount
3477.00
10.69
1155.00
96.36

15.60
121.03
239.59
15.05
15.60
155.61
18.20
153.14
153.14
37.05
39.00
90.00
18.00
44.59
2.13
2.20
5.76
4.07
7.94

DSR-12

Page 1775 of 2298

5876.75
58.77
5935.52
890.33
6825.85

5 Kg/Sqm.
Amount
2812.50
6.57
60.00
1.50
1.00
2.16
11.62
9.00
13.56

15.60
360.62
46.93
116.09
3457.15
34.57
3491.72
523.76
4015.48

rface @ 0.50 Kg/Sqm.

Amount
1875.00
4.38
40.00
1.00
1.00
2.16
11.62
9.00
11.62

15.60

DSR-12

Page 1776 of 2298

360.62
46.93
116.09
2495.02
24.95
2519.97
378.00
2897.97

g preparing the surface & cleaning with

sqm

Amount
38780.00
122.64
1008.00
910.00
1600.00
20.80
494.00
42935.44
429.35
43364.79
6504.72
49869.51

g preparing the surface & cleaning with

kg/sqm

Amount
24237.50
76.65
1008.00
910.00
1600.00
20.80

DSR-12

Page 1777 of 2298

494.00
28346.95
283.47
28630.42
4294.56
32924.98

g preparing the surface & cleaning with

kg/sqm

Amount
39480.00
122.64
1008.00
910.00
1600.00
20.80
494.00
43635.44
436.35
44071.79
6610.77
50682.56

g preparing the surface & cleaning with

25kg/sqm

Amount
24675.00
76.65
1008.00
910.00
1600.00
20.80
494.00
28784.45
287.84
29072.29

DSR-12

Page 1778 of 2298

4360.84
33433.13

size and 11.2 mm size and 52 kg and 56 kg

alt.

Amount

5400.00
12.61
231.84
0.88
1890.00
945.00
236.52
115.20
2.88

20.80
345.80
345.80
140.79
57.19
1235.00
66.69
28.60
165.00
82.58
4.07
104.00
160.00
2.20
5.76
10.07
14.14
11623.42
116.23
11739.65
1760.95
13500.60

DSR-12

Page 1779 of 2298

size and 11.2 mm size and 52 kg and 56 kg

Amount

5544.00
12.61
1890.00
945.00
236.52
115.20
2.88

20.80
345.80
345.80
140.79
57.19
1235.00
66.69
28.60
165.00
82.58
4.07
104.00
160.00
2.20
5.76
10.07
14.14
11534.70
115.35
11650.05
1747.51
13397.56

DSR-12

Page 1780 of 2298

size and 11.2 mm size and 52 kg and 56 kg

to IRC : SP : 53-1999.

Amount

5544.00
12.61
231.84
0.88
1890.00
945.00
236.52
115.20
2.88

20.80
345.80
345.80
140.79
57.19
1235.00
66.69
28.60
165.00
82.58
4.07
104.00
160.00
2.20
5.76
10.07
14.14
11767.42
117.67
11885.09
1782.76
13667.85

DSR-12

Page 1781 of 2298

mm and 11.2 mm size respectively per 100

g of asphalt.

Amount

6750.00
289.80
15.77
1.10
2362.50
1176.00
295.21
144.00
3.60

20.80
345.80
345.80
175.37
57.19
1543.75
66.69
28.60
165.00
82.58
4.07
120.00
160.00
2.20
5.76
10.07
14.14
14185.80
141.86
14327.66
2149.15
16476.81

mm and 11.2 mm size respectively per 100

DSR-12

Page 1782 of 2298

Amount

6930.00
15.77
2362.50
1176.00
295.21
144.00
3.60

20.80
345.80
345.80
175.37

57.19
1543.75
66.69
28.60
165.00
82.58
4.07
120.00
160.00
2.20
5.76
10.07
14.14
14074.90
140.75
14215.65
2132.35
16348.00

mm and 11.2 mm size respectively per 100

nforming to IRC : SP : 53-1999.

Amount

DSR-12

Page 1783 of 2298

6930.00
289.80
15.77
1.10
2362.50
1176.00
295.21
144.00
3.60

20.80
345.80
345.80
175.37
57.19
1543.75
66.69
28.60
165.00
82.58
4.07
120.00
160.00
2.20
5.76
10.07
14.14
14365.80
143.66
14509.46
2176.42
16685.88

100 Sqm and bitumen emulsion (medium

Amount
6486.00
20.15

DSR-12

Page 1784 of 2298

2520.00
210.24

57.19
874.38
66.69
28.60
165.00
82.58
4.07
160.00
14.14
10689.04
106.89
10795.93
1619.39
12415.32

100 Sqm and bitumen emulsion (medium

Amount
8121.60
25.23
3150.00
262.80

57.19
1012.70
66.69
28.60
165.00
82.58
4.07
14.14
12990.60
129.91
13120.51
1968.08
15088.59

DSR-12

Page 1785 of 2298

penetration grade : For 50 mm compacted

Amount

9490.50
10258.50
1869.00
555.00
2446.50
2793.00
518.00
951.25
1059.96
388.94
101.62
69375.00
162.06
4117.49
1316.51
659.49
328.51
174.20
328.51
1647.49
165.49
460.20
360.00
915.00
522.99

2104.96
104.40
113174.57
1131.75
114306.32
17145.95
131452.27

penetration grade : For 75 mm compacted

DSR-12

Page 1786 of 2298

Amount

7290.00
771.28
15309.00
4536.00
2050.00
2698.50
850.50
76500.00
2131.31
178.70
6175.00
1976.00
988.00
494.00
260.00
494.00
2470.00
247.00
689.00
400.00
1125.00
639.21

2209.02
108.86
130590.38
1305.90
131896.28
19784.44
151680.72

thick.
Amount

DSR-12

Page 1787 of 2298

3774.00
8.94

21.00
212.10

76.78

174.00

9.45

11.10
0.03
20.24
7.27
15.24
4129.00
203.39
390.00
150.50
910.00
65.00
130.00
370.00
228.37
10906.41
109.06
11015.47
1652.32
12667.79

thick.
Amount

DSR-12

Page 1788 of 2298

3774.00
8.94

21.00
212.10

76.78

174.00

9.45

11.10
0.03
20.24
7.27
15.24
4129.00
203.39
390.00
150.50
910.00
65.00
130.00
370.00
228.37
10906.41
109.06
11015.47
1652.32
12667.79

per kg of asphalt.
Amount

11362.50

DSR-12

Page 1789 of 2298

487.83
26.54
1.86
1039.50
693.00
144.54
242.40
6.07
1848.00
144.54

41.60
345.80
345.80
293.93

72.24
1511.64
83.98
33.80
195.00
168.00
200.00
96.62
7.94
2.60
7.20
10.65
13.37
19426.95
194.27
19621.22
2943.18
22564.40

Amount

11665.50
26.54
1039.50
693.00
144.54

DSR-12

Page 1790 of 2298

242.40
6.07
1848.00
144.54

41.60
345.80
345.80
293.93

72.24
1511.64
83.98
33.80
195.00
168.00
200.00
96.62
7.94
2.60
7.20
10.65
13.37
19240.26
192.40
19432.66
2914.90
22347.56

55 Conforming to IRC : SP 53-1999.

Amount

11665.50
487.83
26.54
1.86
1039.50
693.00
144.54
242.40
6.62

DSR-12

Page 1791 of 2298

1848.00
144.54

41.60
345.80
345.80
293.93

72.24
1511.64
83.98
33.80
195.00
168.00
200.00
96.62
7.94
2.60
7.20
10.65
13.37
19730.50
197.31
19927.81
2989.17
22916.98

Kg of asphalt.
Amount

17962.50
771.19
2.93
41.96
1638.00
1092.00
227.76
2912.00
227.76
383.20
9.59

DSR-12

Page 1792 of 2298

41.60
345.80
345.80
464.36

93.31
2336.62
111.15
46.80
270.00
133.78
240.00
120.00
6.59
1.80
4.86
7.94
24.02
29863.32
298.63
30161.95
4524.29
34686.24

t.
Amount

18441.50
41.96
1638.00
1092.00
227.76
2912.00
227.76
383.20
9.59

41.60
345.80
345.80
464.36

DSR-12

Page 1793 of 2298

93.31
2336.62
111.15
46.80
270.00
133.78
240.00
120.00
6.59
1.80
4.86
7.94
24.02
29568.20
295.68
29863.88
4479.58
34343.46

Conforming to IRC : SP 53-1999.

Amount

18441.50
771.19
2.93
41.96
1638.00
1092.00
227.76
2912.00
227.76
383.20
9.59

41.60
345.80
345.80
464.36

93.31

DSR-12

Page 1794 of 2298

2336.62
111.15
46.80
270.00
133.78
240.00
120.00
6.59
1.80
4.86
7.94
24.02
30342.32
303.42
30645.74
4596.86
35242.60

sieve) with bitumen using 128 Kg of grade

Amount
2880.00
6.73
672.00
52.56
614.40
15.38

15.60
121.03
239.59
74.10

274.17
15.05
37.05
15.60
90.00
40.00
40.00
44.59
0.39
1.00
2.16

DSR-12

Page 1795 of 2298

27.12
5278.52
52.79
5331.31
799.70
6131.01

Amount
3675.00
8.58
990.00
78.84
784.00
19.62

12.04
15.60
170.43
28.60
345.80
345.80
13.00
125.97
37.05
15.60
90.00
18.00
44.59
48.00
1.00
2.16
27.12
4.07
6900.87
69.01
6969.88
1045.48
8015.36

DSR-12

Page 1796 of 2298

Amount

231.00
494.00
115.50
49.51
28.91
498.40
38.98
1600.00
24.92
28.70
402.61
182.00
61.60
21.00
38.74

67.92 A
2.13
3885.92
38.18
3924.10
578.43
4502.53

rse sand and graded stone aggregate of 40

Amount
1700.00
26.48
494.00
231.00
115.50
498.40
49.51
28.91
38.98

494.00

DSR-12

Page 1797 of 2298

70.20
15.05
13.65
10.40
20.09
17.29
350.00
130.00

8.13
20.00
49.55
10.32
10.32

361.86
74.50
4838.14
48.38
4886.52
732.98
5619.50

rse sand and graded stone aggregate of 40

Amount
1700.00
26.48
494.00
231.00
115.50
498.40
49.51
28.91
38.98

494.00
70.20
15.05
13.65
10.40
20.09
17.29

DSR-12

Page 1798 of 2298

350.00
300.00
130.00

8.13
20.00
49.55
10.32
10.32

361.86
74.50
5138.14
51.38
5189.52
778.43
5967.95

Amount
37.00
37.00
0.37
37.37
5.61
42.98

Amount

15750.00

18.40
273.00
741.00
40.10
16822.50
168.23

DSR-12

Page 1799 of 2298

16990.73
2548.61
19539.34

sealing comp- ound in expansion joints.

Amount

799.76
2.63
273.00
617.50
30.80
1723.69
17.24
1740.93
261.14
2002.07

inish paint of superior make like Goodlas

Amount

474.30
7.55
147.42
133.38
54.24
816.89
8.17
825.06
123.76
948.82

DSR-12

Page 1800 of 2298

inish paint of superior make like Goodlas

Amount
282.20
1.67
98.28
88.92
36.42
507.49
5.07
512.56
76.88
589.44

onforming to IS : 164,:- New work (Two or

Amount
177.60
3.95
26.00
147.42
414.96
54.24
824.17
8.24
832.41
124.86
957.27

onforming to IS : 164,:- Old work (One or

Amount
106.80
0.97
15.60
98.28
276.64
36.42

DSR-12

Page 1801 of 2298

534.71
5.35
540.06
81.01
621.07

ot path i/c providing CC 1:3:6 for shape of

Amount

122.93 A

539.00 B

7846.80 C

1373.64 D

1419.25 E

DSR-12

Page 1802 of 2298

2197.81 F

656.63 G

149.69 H
120.00
1.87
32.00
4.38
8.65
0.78
1.89
1.89
94.71
120.54
156.00
12.98
11.35
14872.79
5.67
14878.46
85.91
14964.37

P/ ABS having electronically welded micro-

Amount
2700.00
3.87
136.50
123.50
58.11
3021.98
30.22
3052.20
457.83
3510.03

DSR-12

Page 1803 of 2298

mum thickness 15 cm.

Amount

90.20
5.96
2.15
24.27

28.65
28.65
19.65
71.72
6.18
6.18
0.20
1.20
0.59
0.00
0.27
64.22
64.22
46.80
461.11
4.61
465.72
69.86
535.58

Amount

1961.89
177.84
148.20
50.00
8.76
2.20
2.64

DSR-12

Page 1804 of 2298

0.91
402.95
225.87
194.39
68.12
18.21

2.50
0.44
270.90
489.06
13.00
4037.88
40.38
4078.26
611.74
4690.00

th) upto 3.0 m height of wall with existing

Amount
3650.00

2295.00
400.00
73.61

247.00
150.50
136.50
6952.61
69.53
7022.14
1053.32
8075.46

for profile corrective base/ binding course

average compacted thickness ..

DSR-12

Page 1805 of 2298

Amount

866250.00
1971.00

42750.00
44887.50
41895.00
43890.00
131100.00
24466.68
18810.00

580.79
71100.00
52500.00
16200.00
5400.00
4800.00
13500.00

1350.00
1794.00
6045.00

4485.00
218.40
3458.00

1300.00
1398751.37
13987.51
1412738.88
211910.83
1624649.71

DSR-12

Page 1806 of 2298

ing with paver finisher and rolling with RR:

ge by weight of total mix) and lime fill

Amount

866250.00
1971.00

42750.00
44887.50
41895.00
43890.00
131100.00
24466.68
18810.00
580.79
84000.00
16200.00
5400.00
4800.00
13500.00

1350.00
1794.00
6045.00

4485.00
218.40
3458.00

DSR-12

Page 1807 of 2298

1300.00
1359151.37
13591.51
1372742.88
205911.43
1578654.31

profile corrective base/ binding course i/c

compacted thickness with bitumen of

Amount

606375.00
1379.70

57900.00
60795.00
60795.00
63690.00
66585.00
25360.20
71100.00
52500.00
16200.00
5400.00
4800.00
13500.00

1350.00
1794.00
6045.00

DSR-12

Page 1808 of 2298

4485.00
218.40
3458.00

1300.00
1125030.30
11250.30
1136280.60
170442.09
1306722.69

rading premixed with bituminous binder ..

centage by weight of total mix) prepared i

Amount

606375.00
1379.70

57900.00
60795.00
60795.00
63690.00
66585.00
25360.20
84000.00
16200.00
5400.00
4800.00
13500.00

1350.00

DSR-12

Page 1809 of 2298

1794.00
6045.00

4485.00

218.40
3458.00
1300.00
1085430.30
10854.30
1096284.60
164442.69
1260727.29

VG -30 @ 5% .. ..
Amount

866250.00
1971.00

85286.25
85286.25
134377.50
24466.68
18810.00
580.79
71100.00
52500.00
16200.00
5400.00
4800.00
13500.00
1350.00
1794.00

DSR-12

Page 1810 of 2298

6045.00

4485.00
218.40
3458.00

1397878.87
13978.79
1411857.66
211778.65
1623636.31

ade VG- 30 @5% (percentage by weight of

pe Hot Mix Plant of 60-90 TPH capacity.

Amount

866250.00
1971.00

85286.25
85286.25
134377.50
24466.68
18810.00
580.79
84000.00
16200.00
5400.00
4800.00
13500.00
1350.00
1794.00
6045.00

DSR-12

Page 1811 of 2298

4485.00

218.40
3458.00
1358278.87
13582.79
1371861.66
205779.25
1577640.91

or wearing course, loading, tansporting to

itumen grade CRMB-60 @ 5.5% by weight

Amount

952875.00
2168.10

44651.25
44651.25
37212.00
38984.00
136930.50
24090.00
28072.00

866.36
71100.00
52500.00
16200.00
5400.00
4800.00
13500.00

DSR-12

Page 1812 of 2298

1350.00
1794.00
6045.00

4485.00
218.40
3458.00

1300.00
1492650.86
14926.51
1507577.37
226136.61
1733713.98

e VG-30 @5.5% (percentage by weight of

c additive @8% (percentage by weight of

Amount

952875.00
2168.10

79200.00
44651.25
44651.25
37212.00
38984.00
136930.50
24090.00
28072.00

866.36

DSR-12

Page 1813 of 2298

71100.00
52500.00
16200.00
5400.00
4800.00
13500.00
1350.00
1794.00
6045.00

4485.00
218.40
3458.00

1300.00
1571850.86
15718.51
1587569.37
238135.41
1825704.78

ade PMB-40 @5.5% and lime filler @ 3%

Amount

1024650.00
2168.10

44651.25
44651.25
37212.00
38984.00
136930.50
24090.00
28072.00

DSR-12

Page 1814 of 2298

866.36
71100.00
52500.00
16200.00
5400.00
4800.00
13500.00
1350.00
1794.00
6045.00

4485.00
218.40
3458.00

1300.00
1564425.86
15644.26
1580070.12
237010.52
1817080.64

me filler @ 3% prepared in Batch Type Hot

Amount

960300.00
2168.10

44651.25
44651.25
37212.00
38984.00
136930.50
24090.00
28072.00

DSR-12

Page 1815 of 2298

866.36
71100.00
52500.00
16200.00
5400.00
4800.00
13500.00
1350.00
1794.00
6045.00

4485.00
218.40
3458.00

1300.00
1500075.86
15000.76
1515076.62
227261.49
1742338.11

me filler @ 3% prepared in drum Type Hot

Amount

952875.00
2168.10

44651.25
44651.25
37212.00
38984.00
136930.50
24090.00

DSR-12

Page 1816 of 2298

28072.00

866.36
84000.00
16200.00
5400.00
4800.00
13500.00
1350.00
1794.00
6045.00

4485.00

218.40
3458.00
1300.00
1453050.86
14530.51
1467581.37
220137.21
1687718.58

5% and lime filler @ 3% and waste plastic

Amount

952875.00
2168.10

79200.00

DSR-12

Page 1817 of 2298

44651.25
44651.25
37212.00
38984.00
136930.50
24090.00
28072.00

866.36
84000.00
16200.00
5400.00
4800.00
13500.00
1350.00
1794.00
6045.00

4485.00

218.40
3458.00
1300.00
1532250.86
15322.51
1547573.37
232136.01
1779709.38

.5% and lime filler @ 3% prepared in drum

Amount

1024650.00
2168.10

DSR-12

Page 1818 of 2298

44651.25
44651.25
37212.00
38984.00
136930.50
24090.00
28072.00

866.36
84000.00
16200.00
5400.00
4800.00
13500.00
1350.00
1794.00
6045.00

4485.00

218.40
3458.00
1300.00
1524825.86
15248.26
1540074.12
231011.12
1771085.24

.5% and lime filler @ 3% prepared in drum

Amount

960300.00
2168.10

DSR-12

Page 1819 of 2298

44651.25
44651.25
37212.00
38984.00
136930.50
24090.00
28072.00

866.36
84000.00
16200.00
5400.00
4800.00
13500.00
1350.00
1794.00
6045.00

4485.00

218.40
3458.00
1300.00
1460475.86
14604.76
1475080.62
221262.09
1696342.71

sheet, face to be fully covered with high

ory sign boards of 900 mm dia.

Amount

823.20

DSR-12

Page 1820 of 2298

0.31

1494.50

1441.49 A

2.60
61.75
96.85

57.64 B
67.10 C

116.22
4161.66
25.95
4187.61
393.21
4580.82

DSR-12

Page 1821 of 2298

sheet, face to be fully covered with high

g sign boards of equilateral triangular ..

Amount

457.80
0.17

838.75

1400.25 A

2.60
61.75
96.85

55.81 B

36.93 C

DSR-12

Page 1822 of 2298

96.85
3047.76
15.55
3063.31
235.55
3298.86

minium sheet, face to be fully covered with

ming to type-III of ASTM-D-4956-01:

Amount
4445.70

1.65

7686.00

39.10
77.48
581.10
840.36
379.84 A

14051.23
136.71
14187.94
2071.22
16259.16

aluminium sheet, face to be fully covered

eer-in- charge as per IRC; 67: 2001,

DSR-12

Page 1823 of 2298

Amount

835.80

1494.50

1979.64 A

2.60
61.75
104.64

58.72 B
67.00 C
46.49
4651.14
25.46
4676.60
385.69
5062.29

g hot thermoplastic material by fully/ semi

Amount

33075.00

DSR-12

Page 1824 of 2298

1550.00
750.00
1600.00
3624.06

327.00
1040.00
542.36
1037.40
43545.82
435.46
43981.28
6597.19
50578.47

hick compacted bed of dry brick ballast of

Amount
500.00
95.22
40.00
7.01
86.45
64.22
46.80
1944.10 A
2783.80
8.40
2792.20
127.22
2919.42

with jamuna sand.

Amount
500.00
95.22
40.00
7.01
86.45

DSR-12

Page 1825 of 2298

64.22
46.80
839.70
8.40
848.10
127.22
975.32

ectors are mounted on M.S pipe of 65 mm

Amount
310.00
116.22
58.11
484.33
4.84
489.17
73.38
562.55

required in layer: All kind of soil.

Amount

392.34 A
20.14
412.48
0.20
412.68
3.05
415.73

x 450x 50 mm in footpath to the required

Amount
2640.00
77.48

DSR-12

Page 1826 of 2298

782.49
315.70
286.00
135.85
70.20
16.08
4323.80
43.24
4367.04
655.06
5022.10

making machine over and i/c 50 mm thick

Amount
3250.00
560.00
43.80
96.00
13.14

150.50
136.50
247.00
123.50
4620.44
46.20
4666.64
700.00
5366.64

Amount

29825.25
302.62
752.50
682.50
617.50
407.55
32587.92
325.88

DSR-12

Page 1827 of 2298

32913.80
4937.07
37850.87

ening with 2 mm dia. wire: Made of G.I. of

Amount

2709.00
232.44
584.22
400.14
260.38
4186.18
41.86
4228.04
634.21
4862.25

ening with 2 mm dia. wire: Made of GI of

Amount

2992.50

232.44
584.22
400.14
260.38
4469.68
44.70
4514.38
677.16
5191.54

DSR-12

Page 1828 of 2298

wire of dia. 3 mm i/c strengthening with 2

Amount

3570.00
232.44
584.22
400.14
260.38
5047.18
50.47
5097.65
764.65
5862.30

Amount
945.00
231.89
1176.89
11.77
1188.66
178.30
1366.96

Amount
325.08
294.84
531.05
397.67
10.07
1558.71
15.59

DSR-12

Page 1829 of 2298

1574.30
236.15
1810.45

dation etc. complete with : Moorum.

Amount
3375.00
657.00

405.08
33.80
4470.88
44.71
4515.59
677.34
5192.93

lidation etc. complete with : Stone agg. 20

Amount
7875.00
657.00
506.35
33.80
9072.15
90.72
9162.87
1374.43
10537.30

lidation etc. complete with : Stone agg. 40

Amount

7125.00

DSR-12

Page 1830 of 2298

714.15
506.35
33.80
8379.30
83.79
8463.09
1269.46
9732.55

hall be laid and finished with screed board

brush etc complete.

Amount

5590.62 A
85.23
61.98
5737.83
1.47
5739.30
22.30
5761.60

t.
Amount

135.00
2.10

4.93
142.03
1.42
143.45
21.52
164.97

DSR-12

Page 1831 of 2298

Amount
2.60
61.75
13.50
125.00
48.96
251.81
2.52
254.33
38.15
292.48

fications, mixing in a mechanical mix plant

BR Value-30

Amount

64800.00
75600.00
6855.84
6307.20
52155.00
4993.20
49680.00
49680.00
7568.64
7200.00
4200.00
675.00
4800.00

13500.00

1350.00

DSR-12

Page 1832 of 2298

14700.00
9300.00
104.00
520.00
1976.00
375964.88
3759.65
379724.53
56958.68
436683.21

fications, mixing in a mechanical mix plant

CBR Value-25

Amount

50400.00
52920.00
4799.09
4415.04
65880.00
6307.20
66240.00
66240.00
10091.52
7200.00
4200.00
675.00
4800.00

13500.00

1350.00
14700.00
9300.00
104.00
520.00

DSR-12

Page 1833 of 2298

1976.00
385617.85
3856.18
389474.03
58421.10
447895.13

fications, mixing in a mechanical mix plant

ng CBR Value-20

Amount

92232.00
8830.08
32940.00
3153.60
86940.00
86940.00
13245.12
7200.00
4200.00
675.00
4800.00

13500.00

1350.00
14700.00
9300.00
104.00
520.00
1976.00
382605.80
3826.06
386431.86
57964.78
444396.64

DSR-12

Page 1834 of 2298

to wet mix macadam (WMM) compacting

Amount

20047.50
21161.25
22275.00
23388.75
4242.05
3902.58
29700.00
31185.00
54351.00
10406.88
51232.50
51232.50
7805.16
7920.00
4200.00
450.00
4800.00

14850.00

1485.00
6000.00
6045.00
124.80
520.00
2470.00
379794.97
3797.95
383592.92
57538.94
441131.86

DSR-12

Page 1835 of 2298

se and fine aggregate conforming to IS:383

Amount

202500.00
212625.00
227360.00
337500.00
35478.00
17782.80
5256.23
4800.00
15000.00
5400.00
6000.00
12400.00
1200.00
29700.00

2970.00
291.20
1560.00
5434.00
1123257.23
11232.57
1134489.80
170173.47
1304663.27

ction of Engineer-in-Charge

Amount

DSR-12

Page 1836 of 2298

97.68
1518.00

227.92 A

592.57 B
2436.17
16.16
2452.33
244.78
2697.11

al of mortar etc. ..

Amount
185.25
741.00
2.98
929.23
9.29
938.52
140.78
1079.30

moval of rubbish etc.,

Amount
61.75
247.00
4.02
312.77
3.13
315.90
47.39
363.29

DSR-12

Page 1837 of 2298

d line, level, curvature, colour and pattern

Amount

560.00
43.80
96.00
13.14
150.50
136.50
247.00
123.50
1370.44
13.70
1384.14
207.62
1591.76

e, level and curvature, jointed with cement

Amount

302.62
752.50
682.50
617.50
407.55
2762.67
27.63
2790.30
418.55
3208.85

DSR-12

Page 1838 of 2298

evel flushing cistern : White Vitreous china

Amount
750.00
640.00
308.00
40.10

40.10
376.25
150.50
247.00
2551.95
25.52
2577.47
386.62
2964.09

585 x 480 mm
Amount

3630.00
640.00
308.00
40.10
40.10
376.25
150.50
247.00
5431.95
54.32
5486.27
822.94
6309.21

rn - : W.C. pan white solid plastic seat and

Amount

DSR-12

Page 1839 of 2298

310.00
680.00
640.00

40.10

40.10
376.25
150.50
247.00
2483.95
24.84
2508.79
376.32
2885.11

ern - : W.C. pan with ISI marked black solid

Amount
293.00
680.00
640.00

40.10

40.10
376.25
150.50
247.00
2466.95
24.67
2491.62
373.74
2865.36

rn - : W.C. pan with ISI marked white solid

Amount

DSR-12

Page 1840 of 2298

310.00
680.00
1550.00
93.56
27.00
20.14
24.02
40.10
40.10
301.00
301.00
247.00
3633.92
36.34
3670.26
550.54
4220.80

rn - : W.C. pan with ISI marked black solid

Amount

293.00
680.00
1550.00
93.56
27.00
20.14
24.02
40.10
40.10
301.00
301.00
247.00
3616.92
36.17
3653.09
547.96
4201.05

DSR-12

Page 1841 of 2298

40x410x265mm sizes One urinal basin with

Amount

460.00
490.00
440.00
20.14
20.14
20.14
58.11
40.10
264.88
264.88
370.50
2448.89
24.49
2473.38
371.01
2844.39

340x410x265mm sizes - automatic flushing

Amount

920.00
490.00
1010.00
30.22
30.22
30.22
58.11
40.10
451.50
451.50
494.00
4005.87
40.06
4045.93
606.89
4652.82

DSR-12

Page 1842 of 2298

40x410x265mm sizes Range of three urinal

Amount

1380.00
530.00
1240.00
50.17
50.17
50.17
58.11
60.05
602.00
602.00
741.00
5363.67
53.64
5417.31
812.60
6229.91

4 urinal basins with 10 lt PVC cistern

Amount
1840.00
530.00
1800.00
80.19
80.19
80.19
58.11
80.19
903.00
903.00
988.00
7342.87
73.43
7416.30
1112.45

DSR-12

Page 1843 of 2298

8528.75

n etc Single half stall with 5 lt PVC cistern

Amount
1440.00
490.00
240.00
158.00
26.15
40.10
38.74
60.24
526.75
602.00
988.00
4609.98
46.10
4656.08
698.41
5354.49

shing cistern Range of two half stall urinals

Amount

2880.00
490.00
380.00
158.00
26.15
80.19
38.74
80.19
752.50
903.00
1482.00
7270.77

DSR-12

Page 1844 of 2298

72.71
7343.48
1101.52
8445.00

flushing cistern Range of three half stall

Amount

4320.00
530.00
490.00
200.00
26.15
120.29
38.74
100.14
903.00
1053.50
1729.00
9510.82
95.11
9605.93
1440.89
11046.82

hing cistern Range of four half stall urinals

Amount

5760.00
530.00
570.00
200.00
26.15
160.38
58.11

DSR-12

Page 1845 of 2298

120.29
1053.50
1204.00
1976.00
11658.43
116.58
11775.01
1766.25
13541.26

ern
Amount
740.00
490.00
170.00
26.15
40.10
38.74
40.10
526.75
225.75
741.00
3038.59
30.39
3068.98
460.35
3529.33

VC cistern
Amount
1480.00
490.00
230.00
26.15
80.19
38.74
49.39
752.50
301.00
988.00
4435.97
44.36
4480.33

DSR-12

Page 1846 of 2298

672.05
5152.38

PVC cistern
Amount
2220.00
530.00
290.00
26.15
120.29
38.74
62.76
903.00
451.50
1235.00
5877.44
58.77
5936.21
890.43
6826.64

VC cistern
Amount
2960.00
365.00
530.00
26.15
160.38
38.74
102.85
1053.50
526.75
1358.50
7121.87
71.22
7193.09
1078.96
8272.05

DSR-12

Page 1847 of 2298

of 15mm CP brass pillar taps

Amount

675.00
340.00
55.00
53.00
24.02
19.95
40.10
20.14
99.33
99.33
165.49
1591.36
15.91
1607.27
241.09
1848.36

sh basin size 630x450 mm with a single 15

Amount
675.00
170.00
55.00
53.00
24.02
19.95
40.10
20.14
90.30
99.33
155.61
1402.45
14.02
1416.47
212.47
1628.94

DSR-12

Page 1848 of 2298

Wash basin size 550x400 mm with a pair of

Amount
530.00
340.00
55.00
53.00
24.02
19.95
40.10
20.14
99.33
99.33
165.49
1446.36
14.46
1460.82
219.12
1679.94

at back wash basin size 550x400 mm with

Amount
530.00
170.00
55.00
53.00
24.02
19.95
40.10
20.14
90.30
99.33
155.61
1257.45
12.57
1270.02
190.50
1460.52

DSR-12

Page 1849 of 2298

5mm CP brass pillar tap

Amount
580.00
170.00
55.00
53.00
24.02
19.95
40.10
20.14
90.30
99.33
155.61
1307.45
13.07
1320.52
198.08
1518.60

5mm CP brass pillar tap

Amount
405.00
170.00
55.00
53.00
24.02
19.95
40.10
20.14
90.30
99.33
155.61
1132.45
11.32
1143.77
171.57
1315.34

DSR-12

Page 1850 of 2298

Amount
425.00
170.00
55.00
53.00
24.02
19.95
40.10
20.14
90.30
99.33
155.61
1152.45
11.52
1163.97
174.60
1338.57

mm
Amount
995.00
1200.00
55.00
53.00
24.02
19.95
40.10
20.14
99.33
99.33
165.49
2771.36
27.71
2799.07
419.86
3218.93

DSR-12

Page 1851 of 2298

mm
Amount
995.00
600.00
55.00
53.00
24.02
19.95
40.10
20.14
90.30
99.33
155.61
2152.45
21.52
2173.97
326.10
2500.07

llar tap
Amount
1690.00
170.00
55.00
53.00
24.02
19.95
40.10
20.14
90.30
99.33
155.61
2417.45
24.17
2441.62
366.24
2807.86

lar tap
Amount

DSR-12

Page 1852 of 2298

1470.00
170.00
55.00
53.00
24.02
19.95
40.10
20.14
90.30
99.33
155.61
2197.45
21.97
2219.42
332.91
2552.33

reception of pipes and fittings

Amount
650.00
60.05
60.24
770.29
7.70
777.99
116.70
894.69

.
Amount
1350.00
53.00
27.00
62.00
24.02
19.95
40.10
20.14
66.22

DSR-12

Page 1853 of 2298

99.33
138.32
1900.08
19.00
1919.08
287.86
2206.94

h 250mm.
Amount

5150.00
106.00
40.29
40.10
20.14
66.22
180.60
202.54
5805.89
58.06
5863.95
879.59
6743.54

sink with drain board 510x1040 mm bowl

Amount

4900.00
106.00
40.29
40.10
20.14
66.22
180.60

DSR-12

Page 1854 of 2298

202.54
5555.89
55.56
5611.45
841.72
6453.17

m
Amount
4200.00
106.00
40.29
40.10
20.14
66.22
180.60
202.54
4855.89
48.56
4904.45
735.67
5640.12

Amount
2900.00
106.00
40.29
40.10
20.14
66.22
180.60
202.54
3555.89
35.56
3591.45
538.72
4130.17

DSR-12

Page 1855 of 2298

en sink without drain board 610x510 mm

Amount

2950.00
53.00
20.14
40.10
20.14
66.22
99.33
138.32
3387.25
33.87
3421.12
513.17
3934.29

en sink without drain board 610x460 mm

Amount
2750.00
53.00
20.14
40.10
20.14
66.22
99.33
138.32
3187.25
31.87
3219.12
482.87
3701.99

178MM

DSR-12

Page 1856 of 2298

Amount
2050.00
53.00
20.14
40.10
20.14
66.22
99.33
138.32
2487.25
24.87
2512.12
376.82
2888.94

Amount
820.00
53.00
27.00
62.00
125.00
175.00
24.02
19.95
40.10
20.14
66.22
99.33
138.32
1670.08
16.70
1686.78
253.02
1939.80

Amount

DSR-12

Page 1857 of 2298

1525.00
53.00
27.00
62.00
125.00
175.00
24.02
19.95
40.10
20.14
66.22
99.33
138.32
2375.08
23.75
2398.83
359.82
2758.65

m
Amount
525.00
53.00
19.95
38.74
11.62
18.06
51.17
54.34
771.88
7.72
779.60
116.94
896.54

Amount
340.00
19.95

DSR-12

Page 1858 of 2298

20.14
150.50
123.50
654.09
6.54
660.63
99.09
759.72

0x440 mm
Amount
750.00
19.95
20.14
150.50
123.50
1064.09
10.64
1074.73
161.21
1235.94

440 mm
Amount
1275.00
-750.00
525.00
5.25
530.25
79.54
609.79

Amount
680.00

DSR-12

Page 1859 of 2298

19.95
20.14
150.50
123.50
994.09
9.94
1004.03
150.60
1154.63

of same colour instead of white vitreous

Amount
1080.00
-680.00
1500.00
-890.00
1010.00
10.10
1020.10
153.02
1173.12

Amount

90.00
12.01
18.06
120.07
1.20
121.27
18.19
139.46

DSR-12

Page 1860 of 2298

Amount

100.00
12.01
18.06
130.07
1.30
131.37
19.71
151.08

nforming to IS : 7231, with all fittings and

Amount
640.00

7.75
37.63
30.88
716.26
7.16
723.42
108.51
831.93

nforming to IS : 7231, with all fittings and

Amount
685.00
10.46

37.63
30.88
763.97
7.64
771.61
115.74
887.35

DSR-12

Page 1861 of 2298

h) capacity - white

Amount
975.00
20.14
150.50
123.50
1269.14
12.69
1281.83
192.27
1474.10

h) capacity - coloured

Amount
1400.00
20.14
150.50
123.50
1694.14
16.94
1711.08
256.66
1967.74

at with lid
Amount
310.00

19.95
329.95
3.30
333.25
49.99

DSR-12

Page 1862 of 2298

383.24

t with lid
Amount
293.00

19.95
312.95
3.13
316.08
47.41
363.49

Coloured (other than black & white) solid

Amount
475.00
19.95
494.95
4.95
499.90
74.99
574.89

Amount
61.00
19.95
80.95
0.81
81.76
12.26
94.02

DSR-12

Page 1863 of 2298

40x410x265mm sizes respectively.

Amount
460.00

14.14
114.38
93.86
682.38
6.82
689.20
103.38
792.58

Amount
740.00
16.08
19.95
150.50
150.50
247.00
1324.03
13.24
1337.27
200.59
1537.86

lat back wash basin of size 630x450mm.

Amount
675.00
80.19
14.14
769.33
7.69
777.02
116.55

DSR-12

Page 1864 of 2298

893.57

Flat back wash basin of size 550x400mm.

Amount
530.00
80.19
14.14
624.33
6.24
630.57
94.59
725.16

Amount
580.00
80.19
14.14
674.33
6.74
681.07
102.16
783.23

Amount
405.00
80.19
14.14
499.33
4.99
504.32
75.65
579.97

DSR-12

Page 1865 of 2298

Amount
425.00
80.19
14.14
519.33
5.19
524.52
78.68
603.20

Amount

995.00
80.19
14.14
1089.33
10.89
1100.22
165.03
1265.25

Flat back wash basin of size 550x400mm.

Amount
1350.00
60.24
16.08
1426.32
14.26
1440.58
216.09
1656.67

DSR-12

Page 1866 of 2298

Size 450x300x150 mm.

Amount

820.00
60.24
16.08
896.32
8.96
905.28
135.79
1041.07

Amount
1525.00
60.24
16.08
1601.32
16.01
1617.33
242.60
1859.93

rigid pipe 32 mm dia

Amount
21.00
30.22
51.22
0.51
51.73
7.76
59.49

DSR-12

Page 1867 of 2298

rigid pipe 40 mm dia

Amount
27.00

30.22
57.22
0.57
57.79
8.67
66.46

ble pipe 32 mm dia

Amount
26.00
30.22
56.22
0.56
56.78
8.52
65.30

ble pipe 40 mm dia

Amount
28.00
30.22
58.22
0.58
58.80
8.82
67.62

DSR-12

Page 1868 of 2298

Amount
15.00
6.20
21.20
0.21
21.41
3.21
24.62

Amount
27.00
2.71
29.71
0.30
30.01
4.50
34.51

ers complete.
Amount
290.00
45.90
69.68 A

4.60
6.20
2.13
90.09
81.51
590.11
5.20
595.31
78.84
674.15

DSR-12

Page 1869 of 2298

stic moulded frame of approved make and

Amount
390.00

37.40
20.00
2.30
2.13
6.20
90.09
81.51
629.63
6.30
635.93
95.39
731.32

stic moulded frame of approved make and

Amount
260.00

30.60
40.00
4.60
2.13
6.20
90.09
81.51
515.13
5.15
520.28
78.04
598.32

Amount

DSR-12

Page 1870 of 2298

300.00

28.90
40.00
4.60
2.13
6.20
90.09
81.51
553.43
5.53
558.96
83.84
642.80

cking : Rectangular shape 1500x450 mm

Amount
670.00
125.80
60.00
6.90
2.13
6.20
90.09
81.51
1042.63
10.43
1053.06
157.96
1211.02

Amount
130.00
20.00
7.60
6.20
68.25
61.75
293.80

DSR-12

Page 1871 of 2298

2.94
296.74
44.51
341.25

Amount
115.00
34.84 A
2.30
6.39
32.76
29.64
220.93
1.86
222.79
28.19
250.98

Amount
118.00
34.84 A
6.90
6.39
32.76
29.64
228.53
1.94
230.47
29.34
259.81

DSR-12

Page 1872 of 2298

Amount
10395.00

120.29
80.19
126.42
54.60
205.01
10981.51
109.82
11091.33
1663.70
12755.03

s per IS: 3989.

Amount
11865.00

120.29
80.19
126.42
54.60
205.01
12451.51
124.52
12576.03
1886.40
14462.43

Amount
9345.00
120.29
60.17
105.35
44.20

DSR-12

Page 1873 of 2298

172.90
9847.91
98.48
9946.39
1491.96
11438.35

pipe as per IS: 3989.

Amount
10342.50
120.29
60.17
105.35
44.20
172.90
10845.41
108.45
10953.86
1643.08
12596.94

e sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe

Amount

10.27
84.28
69.16
163.71
1.64
165.35
24.80
190.15

ine sand) in S.C.I./ C.I. Pipes : 100 mm dia

DSR-12

Page 1874 of 2298

Amount

12.01
99.33
81.51
192.85
1.93
194.78
29.22
224.00

f cutting holes and making good the walls

Amount
85.00
3.68
37.63
204.75
123.50
10.65
3.47
1.16
0.39
2.46
0.19
8.00
0.12
1.11
0.79
0.36
0.09
0.08
0.05
0.39
0.19
0.19
484.25
4.84
489.09
73.36
562.45

DSR-12

Page 1875 of 2298

f cutting holes and making good the walls

Amount
75.00
3.68
37.63
204.75
123.50
10.65
3.47
1.16
0.39
2.46
0.19
8.00
0.12
1.11
0.79
0.36
0.09
0.08
0.05
0.39
0.19
0.19
474.25
4.74
478.99
71.85
550.84

st iron S&S as per IS - 1729

Amount
233.00
14.00
20.14
267.14
2.67
269.81
40.47
310.28

DSR-12

Page 1876 of 2298

lts and nuts complete. 100 mm Sand cast

Amount
270.00
14.00
20.14
304.14
3.04
307.18
46.08
353.26

s and nuts complete. 75 mm dia Sand cast

Amount
187.00
11.00
16.08
214.08
2.14
216.22
32.43
248.65

s and nuts complete. 75 mm dia Sand cast

Amount
215.00
11.00
16.08
242.08
2.42
244.50
36.68
281.18

DSR-12

Page 1877 of 2298

lts and nuts complete. 100 mm Sand cast

Amount
210.00
20.14
230.14
2.30
232.44
34.87
267.31

Amount
235.00
20.14
255.14
2.55
257.69
38.65
296.34

and nuts complete. 75 mm Sand cast iron

Amount
170.00
16.08
186.08
1.86
187.94
28.19
216.13

Amount
175.00
16.08

DSR-12

Page 1878 of 2298

191.08
1.91
192.99
28.95
221.94

Amount
239.00
20.14
259.14
2.59
261.73
39.26
300.99

Amount
275.00
20.14
295.14
2.95
298.09
44.71
342.80

Amount
200.00
16.08
216.08
2.16
218.24
32.74
250.98

DSR-12

Page 1879 of 2298

Amount
240.00
16.08
256.08
2.56
258.64
38.80
297.44

r 3 mm thick...: 100x100x100x100mm SCI

Amount

530.00
14.00
19.95
563.95
5.64
569.59
85.44
655.03

r 3 mm thick...: 100x100x100x100mm SCI

Amount

610.00
14.00
19.95
643.95
6.44
650.39
97.56
747.95

DSR-12

Page 1880 of 2298

3 mm thick...: 75x75x75x75 mm Sand cast

Amount

395.00
11.00
16.08
422.08
4.22
426.30
63.95
490.25

3 mm thick...: 75x75x75x75 mm Sand cast

Amount

475.00
11.00
16.08
502.08
5.02
507.10
76.07
583.17

IS - 1729
Amount

490.00
20.14
510.14
5.10
515.24
77.29

DSR-12

Page 1881 of 2298

592.53

IS - 3989
Amount

565.00
20.14
585.14
5.85
590.99
88.65
679.64

as per IS - 1729
Amount

335.00
16.08
351.08
3.51
354.59
53.19
407.78

989
Amount

450.00
16.08
466.08
4.66
470.74
70.61

DSR-12

Page 1882 of 2298

541.35

s per IS - 1729
Amount

350.00
20.14
14.00
384.14
3.84
387.98
58.20
446.18

s per IS - 3989
Amount
465.00

20.14
14.00
499.14
4.99
504.13
75.62
579.75

r IS - 1729
Amount

260.00
16.08
11.00
287.08
2.87

DSR-12

Page 1883 of 2298

289.95
43.49
333.44

r IS - 3989
Amount
350.00

16.08
11.00
377.08
3.77
380.85
57.13
437.98

s per IS - 1729
Amount

310.00
20.14
330.14
3.30
333.44
50.02
383.46

s per IS - 3989
Amount
430.00
20.14
450.14
4.50
454.64
68.20
522.84

DSR-12

Page 1884 of 2298

s per IS - 1729
Amount

240.00
16.08
256.08
2.56
258.64
38.80
297.44

r IS - 3989
Amount

310.00
16.08
326.08
3.26
329.34
49.40
378.74

m : SCI S & S as per IS: 1729.

Amount
550.00
14.00
20.14
584.14
5.84
589.98
88.50
678.48

DSR-12

Page 1885 of 2298

m : SCI S & S as per IS: 3989.

Amount
850.00
14.00
20.14
884.14
8.84
892.98
133.95
1026.93

S as per IS: 1729.

Amount
510.00
20.14
530.14
5.30
535.44
80.32
615.76

S as per IS: 1729.

Amount
780.00
20.14
800.14
8.00
808.14
121.22
929.36

DSR-12

Page 1886 of 2298

Amount
390.00
14.00
20.14
424.14
4.24
428.38
64.26
492.64

Amount
630.00
14.00
20.14
664.14
6.64
670.78
100.62
771.40

er IS: 1729.
Amount

350.00
20.14
370.14
3.70
373.84
56.08
429.92

er IS: 3989.

DSR-12

Page 1887 of 2298

Amount
560.00
20.14
580.14
5.80
585.94
87.89
673.83

S & S as per IS: 1729.

Amount
510.00
20.14
530.14
5.30
535.44
80.32
615.76

S & S as per IS: 3989.

Amount
525.00
20.14
545.14
5.45
550.59
82.59
633.18

as per IS: 1729.

Amount
382.00
16.08

DSR-12

Page 1888 of 2298

398.08
3.98
402.06
60.31
462.37

as per IS: 3989.

Amount
405.00
16.08
421.08
4.21
425.29
63.79
489.08

s per IS: 1729.

Amount
387.00
20.14
407.14
4.07
411.21
61.68
472.89

s per IS: 3989.

Amount
395.00
20.14
415.14
4.15
419.29
62.89
482.18

DSR-12

Page 1889 of 2298

r IS: 1729.
Amount
290.00
16.08
306.08
3.06
309.14
46.37
355.51

r IS: 3989.
Amount
303.00
16.08
319.08
3.19
322.27
48.34
370.61

as per IS: 3989.

Amount
545.00
20.14
565.14
5.65
570.79
85.62
656.41

as per IS: 3989.

Amount

DSR-12

Page 1890 of 2298

700.00
20.14
720.14
7.20
727.34
109.10
836.44

as per IS: 1729.

Amount
466.00
20.14
486.14
4.86
491.00
73.65
564.65

as per IS: 3989.

Amount
505.00
20.14
525.14
5.25
530.39
79.56
609.95

Amount
215.00
16.08
231.08
2.31
233.39
35.01
268.40

DSR-12

Page 1891 of 2298

Amount
246.00
16.08
262.08
2.62
264.70
39.71
304.41

Amount
270.00
20.14
290.14
2.90
293.04
43.96
337.00

Amount
355.00
20.14
375.14
3.75
378.89
56.83
435.72

Amount

DSR-12

Page 1892 of 2298

335.00
26.73
361.73
3.62
365.35
54.80
420.15

Amount
440.00
26.73
466.73
4.67
471.40
70.71
542.11

Amount
215.00
16.08
231.08
2.31
233.39
35.01
268.40

Amount
270.00
24.02
294.02
2.94
296.96
44.54
341.50

DSR-12

Page 1893 of 2298

Amount
370.00
24.02
394.02
3.94
397.96
59.69
457.65

SCI S & S as per IS: 1729.

Amount
350.00
14.00
20.14
384.14
3.84
387.98
58.20
446.18

SCI S & S as per IS: 3989.

Amount
370.00
14.00
20.14
404.14
4.04
408.18
61.23
469.41

DSR-12

Page 1894 of 2298

CI S & S as per IS: 1729.

Amount
253.00
11.00
16.08
280.08
2.80
282.88
42.43
325.31

CI S & S as per IS: 1729.

Amount
260.00
11.00
16.08
287.08
2.87
289.95
43.49
333.44

Amount

187.00
20.14
207.14
2.07
209.21
31.38
240.59

DSR-12

Page 1895 of 2298

Amount

190.00
20.14
210.14
2.10
212.24
31.84
244.08

Amount

137.00
16.08
153.08
1.53
154.61
23.19
177.80

Amount

175.00
16.08
191.08
1.91
192.99
28.95
221.94

DSR-12

Page 1896 of 2298

Amount
133.00
20.14
153.14
1.53
154.67
23.20
177.87

Amount
185.00
20.14
205.14
2.05
207.19
31.08
238.27

Amount
98.00
16.08
114.08
1.14
115.22
17.28
132.50

Amount
130.00
16.08
146.08
1.46
147.54
22.13

DSR-12

Page 1897 of 2298

169.67

ngs of diameter: 100 mm

Amount
88.20
4.40
20.14
2.13
18.06
16.38
29.64
178.95
1.79
180.74
27.11
207.85

ngs of diameter: 75 mm

Amount

79.20
3.60
16.08
2.13
15.05
13.65
22.23
151.94
1.52
153.46
23.02
176.48

ngs of diameter: 50 mm

DSR-12

Page 1898 of 2298

Amount

69.30
2.40
10.07
2.13
12.04
13.65
12.35
121.94
1.22
123.16
18.47
141.63

m
Amount

33.00
20.14
53.14
0.53
53.67
8.05
61.72

Amount

29.00
16.08
45.08
0.45
45.53
6.83
52.36

DSR-12

Page 1899 of 2298

Amount

25.00
14.14
39.14
0.39
39.53
5.93
45.46

Amount
392.00
20.14
4.07
150.50
123.50
690.21
6.90
697.11
104.57
801.68

Amount
263.00
20.14
4.07
150.50
123.50
561.21
5.61
566.82
85.02
651.84

DSR-12

Page 1900 of 2298

vent arm complete... 100 mm inlet and 75

Amount

424.00
20.14
4.07
150.50
123.50
722.21
7.22
729.43
109.41
838.84

vent arm complete... 100 mm inlet and 75

Amount
198.00
20.14
4.07
150.50
123.50
496.21
4.96
501.17
75.18
576.35

pes 100 mm dia.

Amount

DSR-12

Page 1901 of 2298

105.21 A
15.50
6.20
42.14
66.69
235.74
1.31
237.05
19.78
256.83

pes 75 mm dia.
Amount

71.74 A
11.62
5.23
30.10
49.40
168.09
0.96
169.05
14.60
183.65

pes 50 mm dia.
Amount

38.26 A
7.75
4.07
21.07
34.58
105.73
0.67
106.40
10.22
116.62

DSR-12

Page 1902 of 2298

Amount

19.55
13.60
54.00
2.13
10.07
68.25
123.50
291.10
2.91
294.01
44.10
338.11

Amount

19.55
27.00
30.80
10.65
54.60
61.75
204.35
2.04
206.39
30.96
237.35

Amount
27.00

DSR-12

Page 1903 of 2298

5.42
24.57
29.64
86.63
0.87
87.50
13.13
100.63

grey, or buff etc. over a coat of primer (of

Amount

71.69 A

186.39 B
25.57
283.65
0.26
283.91
3.87
287.78

a coat of primer for new work : 75mm dia

Amount

53.87 A
140.06 B
22.66
216.59
0.23
216.82
3.43
220.25

DSR-12

Page 1904 of 2298

any colour such as chocolate, grey or buff

Amount

121.76 A
18.21
139.97
0.18
140.15
2.76
142.91

any colour such as chocolate, grey or buff

Amount

90.68 A
14.14
104.82
0.14
104.96
2.14
107.10

Amount
112.50
10.07
68.25
61.75
252.57
2.53
255.10
38.27
293.37

DSR-12

Page 1905 of 2298

type water closet (Anglo Indian WC pan) :

Amount
310.00
1250.00
1550.00
411.61
27.00
88.13
106.92
176.46
176.46
301.00
301.00
247.00
4945.58
49.46
4995.04
749.26
5744.30

ngth and 62mm breadth wei- ghing not less

Amount
51.00
30.22
81.22
0.81
82.03
12.30
94.33

aste coupling 38mm of 83mm length and

DSR-12

Page 1906 of 2298

Amount

64.00
30.22
94.22
0.94
95.16
14.27
109.43

ttle trap 31mm single piece moulded with

Amount

317.00
30.22
347.22
3.47
350.69
52.60
403.29

ttle trap 38mm single piece moulded with

Amount

345.00
30.22
375.22
3.75
378.97
56.85
435.82

wall of standard shape with bracket of the

DSR-12

Page 1907 of 2298

Amount

145.00
10.07
155.07
1.55
156.62
23.49
180.11

distances of 37mm from wall face with

Amount

116.00
30.22
146.22
1.46
147.68
22.15
169.83

quality and colour. 450MM long towel rail -

Amount
192.00
34.84 A
6.90
6.20
46.41
41.99
328.34
2.94
331.28
44.47
375.75

DSR-12

Page 1908 of 2298

Amount
226.00
34.84 A
6.90
6.20
46.41
41.99
362.34
3.28
365.62
49.62
415.24

0gm
Amount
258.00
34.84 A
6.90
6.20
46.41
41.99
394.34
3.60
397.94
54.47
452.41

eighing not less than 60 grams.

Amount
127.00
10.07
137.07
1.37
138.44

DSR-12

Page 1909 of 2298

20.77
159.21

female threads weighing not less than 48

Amount
94.00
12.01
106.01
1.06
107.07
16.06
123.13

mm flat of specified shape: Total bracket

Amount

291.55
0.54
9.93
13.38
16.06

11.62 A

2.01

441.20 B
786.29
3.33
789.62
50.52
840.14

DSR-12

Page 1910 of 2298

mm flat of specified shape: Total bracket

Amount

427.55
0.79
14.45
19.66
23.71

18.34 A
2.95

441.20 B
948.65
4.89
953.54
74.10
1027.64

mm flat of specified shape: Total bracket

Amount

DSR-12

Page 1911 of 2298

563.55
1.04
18.96
25.94
31.12

25.06 A
3.87

441.20 B
1110.74
6.44
1117.18
97.64
1214.82

nd white vitreous china cistern - capacity 3

Amount
4548.00
2409.60
310.00
14.59
301.00
247.00
301.00
8131.19
81.31
8212.50
1231.88
9444.38

ial /germs free ceramic surface, fixed with

Amount
13208.00

DSR-12

Page 1912 of 2298

3029.60
14.59
150.50
123.50
16526.19
165.26
16691.45
2503.72
19195.17

610 x 390 x 370 mm having pre & post

Amount
12592.75
14.59
150.50
123.50
12881.34
128.81
13010.15
1951.52
14961.67

ng all special fittings of composite material

Amount
900.00
270.00
4.07
99.33
180.18
163.02
1616.60
16.17
1632.77
244.92
1877.69

DSR-12

Page 1913 of 2298

terial . with clamps (Internal work exposed

Amount

1443.00
4.07
99.33
223.86
163.02
1933.28
19.33
1952.61
292.89
2245.50

terial . with clamps (Internal work exposed

Amount
1859.00
4.07
99.33
267.54
163.02
2392.96
23.93
2416.89
362.53
2779.42

terial . with clamps (Internal work exposed

Amount
2509.00
6.20
99.33
267.54

DSR-12

Page 1914 of 2298

242.06
3124.13
31.24
3155.37
473.31
3628.68

terial . with clamps (Internal work exposed

Amount
4030.00
7.94
99.33
357.63
323.57
4818.47
48.18
4866.65
730.00
5596.65

terial . with clamps (Internal work exposed

Amount
4355.00
7.94
99.33
357.63
323.57
5143.47
51.43
5194.90
779.24
5974.14

d on wall): (concealed work ) 1620 (20 mm

DSR-12

Page 1915 of 2298

Amount
1575.00

644.90 A

99.33
180.18
163.02
2662.43
20.18
2682.61
305.66
2988.27

d on wall): (concealed work ) 1620 (20 mm

Amount
1942.50

644.90 A

99.33
180.18
163.02
3029.93
23.85
3053.78
361.33
3415.11

d on wall): (concealed work ) 2025 (25 mm

Amount
2502.50

DSR-12

Page 1916 of 2298

644.90 A

99.33
180.18
163.02
3589.93
29.45
3619.38
446.17
4065.55

d on wall): (concealed work ) 2532 (32 mm

Amount
3377.50

644.90 A

99.33
180.18
163.02
4464.93
38.20
4503.13
578.73
5081.86

216 (16 mm O/D) pipe.

Amount
1170.00

24.08
39.52
163.02
163.02
1559.64
15.60
1575.24
236.29

DSR-12

Page 1917 of 2298

1811.53

620 (20 mm O/D) pipe.

Amount
1443.00

24.08
39.52
163.02
163.02
1832.64
18.33
1850.97
277.65
2128.62

025 (25 mm O/D) pipe.

Amount
1859.00

24.08
39.52
163.02
163.02
2248.64
22.49
2271.13
340.67
2611.80

532 (32 mm O/D) pipe.

Amount

DSR-12

Page 1918 of 2298

2509.00

24.08
39.52
163.02
163.02
2898.64
28.99
2927.63
439.14
3366.77

240 (40 mm O/D) pipe.

Amount
4030.00

48.16
81.51
163.02
163.02
4485.71
44.86
4530.57
679.59
5210.16

050 (50 mm O/D) pipe.

Amount
4355.00

48.16
81.51
163.02
163.02
4810.71
48.11
4858.82

DSR-12

Page 1919 of 2298

728.82
5587.64

s threaded polypropylene random fittings,

Amount
416.00
4.07
99.33
180.18
163.02
862.60
8.63
871.23
130.68
1001.91

s threaded polypropylene random fittings,

Amount
650.00
4.07
99.33
223.86
163.02
1140.28
11.40
1151.68
172.75
1324.43

s threaded polypropylene random fittings,

DSR-12

Page 1920 of 2298

Amount
988.00
4.07
99.33
267.54
163.02
1521.96
15.22
1537.18
230.58
1767.76

s threaded polypropylene random fittings,

Amount
1612.00
6.20
99.33
267.54
242.06
2227.13
22.27
2249.40
337.41
2586.81

s threaded polypropylene random fittings,

Amount
2548.00
7.94
99.33
357.63
323.57
3336.47
33.36
3369.83

DSR-12

Page 1921 of 2298

505.47
3875.30

s threaded polypropylene random fittings,

Amount
3718.00
7.94
99.33
357.63
323.57
4506.47
45.06
4551.53
682.73
5234.26

s threaded polypropylene random fittings,

Amount
560.00

644.90 A

99.33
180.18
163.02
1647.43
10.03
1657.46
151.88
1809.34

s threaded polypropylene random fittings,

DSR-12

Page 1922 of 2298

Amount
875.00

644.90 A

99.33
180.18
163.02
1962.43
13.18
1975.61
199.61
2175.22

s threaded polypropylene random fittings,

Amount
1330.00

644.90 A

99.33
180.18
163.02
2417.43
17.73
2435.16
268.54
2703.70

anti-microbial fusion welded, i/c all PP- R

cutting chases and making the same.:

Amount
2170.00

DSR-12

Page 1923 of 2298

644.90 A

99.33
180.18
163.02
3257.43
26.13
3283.56
395.80
3679.36

o- bial fusion welded, i/c all PP-R plain and

rnal work): PN - 16 Pipe, 15 mm O

Amount
416.00

24.08
39.52
163.02
163.02
805.64
8.06
813.70
122.06
935.76

trenching refilling (External work): PN - 16

Amount
650.00

24.08
39.52
163.02
163.02
1039.64
10.40

DSR-12

Page 1924 of 2298

1050.04
157.51
1207.55

ng trenching refilling (External work): PN -

Amount
988.00

36.12
61.75
163.02
163.02
1411.91
14.12
1426.03
213.90
1639.93

trenching refilling (External work): PN - 16

Amount
1612.00

36.12
61.75
163.02
163.02
2035.91
20.36
2056.27
308.44
2364.71

ng trenching refilling (External work): PN -

DSR-12

Page 1925 of 2298

Amount
2548.00

48.16
81.51
163.02
163.02
3003.71
30.04
3033.75
455.06
3488.81

ng trenching refilling (External work): PN -

Amount
3718.00

48.16
81.51
163.02
163.02
4173.71
41.74
4215.45
632.32
4847.77

ng trenching refilling (External work): PN -

Amount
5785.00

75.25
163.02
163.02
163.02
6349.31
63.49

DSR-12

Page 1926 of 2298

6412.80
961.92
7374.72

o- bial fusion welded, i/c all PP-R plain and

rnal work): PN - 16 Pipe, 75 mm O

Amount
8320.00

75.25
163.02
163.02
163.02
8884.31
88.84
8973.15
1345.97
10319.12

ng trenching refilling (External work): PN -

Amount
13260.00

111.37
239.59
197.60
197.60
14006.16
140.06
14146.22
2121.93
16268.15

DSR-12

Page 1927 of 2298

ng trenching refilling (External work): PN -

Amount
13910.00

111.37
239.59
197.60
197.60
14656.16
146.56
14802.72
2220.41
17023.13

o- bial fusion welded, i/c all PP-R plain and

rnal work): PN - 10 Pipe, 160 mm

Amount
29315.00

174.58
380.38
296.40
296.40
30462.76
304.63
30767.39
4615.11
35382.50

C plain & brass threaded fittings... 15 mm

Amount
663.00

4.07

DSR-12

Page 1928 of 2298

99.33
223.86
163.02
1153.28
11.53
1164.81
174.72
1339.53

C plain & brass threaded fittings... 20 mm

Amount
819.00

4.07
99.33
267.54
163.02
1352.96
13.53
1366.49
204.97
1571.46

C plain & brass threaded fittings... 25 mm

Amount
1170.00

4.07
99.33
267.54
163.02
1703.96
17.04
1721.00
258.15
1979.15

DSR-12

Page 1929 of 2298

C plain & brass threaded fittings... 32 mm

Amount
1560.00
6.20
99.33
267.54
242.06
2175.13
21.75
2196.88
329.53
2526.41

C plain & brass threaded fittings... 40 mm

Amount
2210.00
7.94
99.33
357.63
323.57
2998.47
29.98
3028.45
454.27
3482.72

C plain & brass threaded fittings... 50 mm

Amount

3640.00
7.94
99.33

DSR-12

Page 1930 of 2298

357.63
323.57
4428.47
44.28
4472.75
670.91
5143.66

C plain & brass threaded fittings... 15 mm

Amount
892.50

644.90 A

99.33
180.18
163.02
1979.93
13.35
1993.28
202.26
2195.54

C plain & brass threaded fittings... 20 mm

Amount
1102.50

644.90 A

99.33
180.18
163.02
2189.93
15.45
2205.38
234.07
2439.45

DSR-12

Page 1931 of 2298

C plain & brass threaded fittings... 25 mm

Amount
1575.00

644.90 A

99.33
180.18
163.02
2662.43
20.18
2682.61
305.66
2988.27

C plain & brass threaded fittings... 32 mm

Amount
2100.00

644.90 A

99.33
180.18
163.02
3187.43
25.43
3212.86
385.19
3598.05

plain & brass threaded fittings... External

DSR-12

Page 1932 of 2298

Amount
663.00

24.08
39.52
163.02
163.02
1052.64
10.53
1063.17
159.48
1222.65

plain & brass threaded fittings... External

Amount

819.00
24.08

39.52
163.02

163.02
1208.64
12.09
1220.73
183.11
1403.84

plain & brass threaded fittings... External

Amount
1170.00

36.12
61.75
163.02

DSR-12

Page 1933 of 2298

163.02
1593.91
15.94
1609.85
241.48
1851.33

plain & brass threaded fittings... External

Amount
1560.00

36.12
61.75
163.02
163.02
1983.91
19.84
2003.75
300.56
2304.31

plain & brass threaded fittings... External

Amount
2210.00

48.16
81.51
163.02
163.02
2665.71
26.66
2692.37
403.86
3096.23

DSR-12

Page 1934 of 2298

plain & brass threaded fittings... External

Amount
3640.00

48.16
81.51
163.02
163.02
4095.71
40.96
4136.67
620.50
4757.17

plain & brass threaded fittings... External

Amount
10855.00

75.25
163.02
163.02
163.02
11419.31
114.19
11533.50
1730.03
13263.53

n & brass threaded fittings i/c trenching,

Amount
15405.00

75.25
163.02

DSR-12

Page 1935 of 2298

163.02
163.02
15969.31
159.69
16129.00
2419.35
18548.35

n & brass threaded fittings i/c trenching,

Amount
21320.00

111.37
239.59
197.60
197.60
22066.16
220.66
22286.82
3343.02
25629.84

n & brass threaded fittings i/c trenching,

Amount
37310.00

174.58
380.38
296.40
296.40
38457.76
384.58
38842.34
5826.35
44668.69

DSR-12

Page 1936 of 2298

nominal bore
Amount
931.50
1.10

12.01
4.07
99.33
180.18
163.02
1391.21
13.91
1405.12
210.77
1615.89

nominal bore
Amount
1115.50
1.43

12.01
4.07
99.33
223.86
163.02
1619.22
16.19
1635.41
245.31
1880.72

DSR-12

Page 1937 of 2298

nominal bore
Amount
1541.00
2.20

14.14
6.20
99.33
267.54
163.02
2093.43
20.93
2114.36
317.15
2431.51

nominal bore
Amount
1920.50
2.84

14.14
6.20
99.33
267.54
242.06
2552.61
25.53
2578.14
386.72
2964.86

nominal bore
Amount

DSR-12

Page 1938 of 2298

2323.00
3.27

20.14
7.94
99.33
357.63
323.57
3134.88
31.35
3166.23
474.93
3641.16

nominal bore
Amount
2921.00
4.63

20.14
7.94
99.33
447.72
405.08
3905.84
39.06
3944.90
591.74
4536.64

d making good the wall 15 mm dia nominal

Amount
931.50
1.10

DSR-12

Page 1939 of 2298

12.01

43.90 A

644.90 B

99.33
180.18
163.02
2075.94
13.87
2089.81
210.15
2299.96

d making good the wall 20 mm dia nominal

Amount
1115.50
1.10
12.01

51.60 A

644.90 B

99.33
180.18
163.02
2267.64
15.71
2283.35
238.03
2521.38

k 15 mm dia. nominal bore

Amount

DSR-12

Page 1940 of 2298

826.20
0.97

7.94
24.08
39.52

163.02
163.02
1224.75
12.25
1237.00
185.55
1422.55

k 20 mm dia. nominal bore

Amount
989.40
1.26

7.94
24.08
39.52

163.02
163.02
1388.24
13.88
1402.12
210.32
1612.44

k 25 mm dia. nominal bore

DSR-12

Page 1941 of 2298

Amount
1366.80
1.95

10.07
36.12
61.75

163.02
163.02
1802.73
18.03
1820.76
273.11
2093.87

k 32 mm dia. nominal bore

Amount
1703.40
2.52

10.07
36.12
61.75

163.02
163.02
2139.90
21.40
2161.30
324.20
2485.50

DSR-12

Page 1942 of 2298

dia. nominal bore

Amount
2060.40
2.90

14.14

48.16
81.51

163.02
163.02
2533.15
25.33
2558.48
383.77
2942.25

k 50mm dia. nominal bore

Amount
2590.80
4.10

14.14
48.16
81.51

163.02
163.02
3064.75
30.65
3095.40
464.31
3559.71

DSR-12

Page 1943 of 2298

k 65mm dia. nominal bore

Amount
3315.00
5.26

20.14
75.25
163.02

163.02
163.02
3904.71
39.05
3943.76
591.56
4535.32

k 80mm dia. nominal bore

Amount
4345.20
6.86

20.14
75.25
163.02

163.02
163.02
4936.51
49.37
4985.88
747.88
5733.76

DSR-12

Page 1944 of 2298

Amount
42.00
8.00
7.94
99.33
81.51
238.78
2.39
241.17
36.18
277.35

Amount
270.00
18.00
7.94
135.45
111.15
542.54
5.43
547.97
82.20
630.17

op cock to be paid separately).

Amount
8.00
7.94
99.33
81.51
196.78
1.97
198.75

DSR-12

Page 1945 of 2298

29.81
228.56

Amount
165.00
12.01
177.01
1.77
178.78
26.82
205.60

Amount

215.00
14.14
229.14
2.29
231.43
34.71
266.14

Amount
165.00
12.01
177.01
1.77
178.78
26.82
205.60

DSR-12

Page 1946 of 2298

Amount
215.00
14.59
229.59
2.30
231.89
34.78
266.67

Amount
305.00
16.08
321.08
3.21
324.29
48.64
372.93

Amount
370.00
18.21
388.21
3.88
392.09
58.81
450.90

Amount
450.00
20.14
470.14
4.70
474.84
71.23
546.07

DSR-12

Page 1947 of 2298

Amount
650.00
22.08
672.08
6.72
678.80
101.82
780.62

Amount
900.00
24.02
924.02
9.24
933.26
139.99
1073.25

Amount
1550.00
28.09
1578.09
15.78
1593.87
239.08
1832.95

bore
Amount
190.00
32.15

DSR-12

Page 1948 of 2298

222.15
2.22
224.37
33.66
258.03

bore
Amount
270.00
40.10
310.10
3.10
313.20
46.98
360.18

bore
Amount
315.00
48.04
363.04
3.63
366.67
55.00
421.67

Amount

310.00
20.14
330.14
3.30
333.44
50.02
383.46

DSR-12

Page 1949 of 2298

Amount
320.00
20.14
340.14
3.40
343.54
51.53
395.07

Amount

400.00
22.08
422.08
4.22
426.30
63.95
490.25

Amount

490.00
22.08
512.08
5.12
517.20
77.58
594.78

DSR-12

Page 1950 of 2298

Amount

510.00
24.02
534.02
5.34
539.36
80.90
620.26

Amount

680.00
24.02
704.02
7.04
711.06
106.66
817.72

Amount

780.00
26.15
806.15
8.06
814.21
122.13
936.34

DSR-12

Page 1951 of 2298

Amount

930.00
26.15
956.15
9.56
965.71
144.86
1110.57

Amount
1420.00
28.09
1448.09
14.48
1462.57
219.39
1681.96

Amount
1650.00
28.09
1678.09
16.78
1694.87
254.23
1949.10

Amount
2030.00
30.22

DSR-12

Page 1952 of 2298

2060.22
20.60
2080.82
312.12
2392.94

Amount
2630.00
30.22
2660.22
26.60
2686.82
403.02
3089.84

Amount
115.00
60.05
175.05
1.75
176.80
26.52
203.32

Amount
145.00
70.31
215.31
2.15
217.46
32.62
250.08

DSR-12

Page 1953 of 2298

Amount
205.00
80.19
285.19
2.85
288.04
43.21
331.25

re
Amount

26.00
18.21
44.21
0.44
44.65
6.70
51.35

re
Amount

33.00
18.21
51.21
0.51
51.72
7.76
59.48

ore _x000D_

DSR-12

Page 1954 of 2298

Amount
33.00
20.14
53.14
0.53
53.67
8.05
61.72

re
Amount

43.00
20.14
63.14
0.63
63.77
9.57
73.34

Amount
40.00
10.07
50.07
0.50
50.57
7.59
58.16

Amount

55.00

DSR-12

Page 1955 of 2298

12.01
67.01
0.67
67.68
10.15
77.83

Amount

51.17
46.41
328.51
24.02
450.11
4.50
454.61
68.19
522.80

Amount

279.93
169.26
612.56
59.85
1121.60
11.22
1132.82
169.92
1302.74

- Upto 300 mm dia.

Amount
3450.00

DSR-12

Page 1956 of 2298

7.77
186.11 A
3643.88
34.58
3678.46
523.85
4202.31

- Over 300 mm dia.

Amount
3550.00
7.77
186.11 A
3743.88
35.58
3779.46
539.00
4318.46

mm dia.
Amount
5300.00
7.77
186.11 A
5493.88
53.08
5546.96
804.13
6351.09

mm dia.
Amount

DSR-12

Page 1957 of 2298

5600.00
7.77
186.11 A
5793.88
56.08
5849.96
849.58
6699.54

Amount

8300.00
19.15
201.39 A
8520.54
83.19
8603.73
1260.35
9864.08

Amount

10400.00
25.68
262.41 A
10688.09
104.26
10792.35
1579.49
12371.84

DSR-12

Page 1958 of 2298

Amount

12400.00
31.91
327.51 A
12759.42
124.32
12883.74
1883.43
14767.17

Amount

21200.00
51.91
479.05 A
21730.96
212.52
21943.48
3219.66
25163.14

Amount

28300.00
73.77
645.86 A

DSR-12

Page 1959 of 2298

29019.63
283.74
29303.37
4298.63
33602.00

Amount

37400.00
91.18
831.99 A
38323.17
374.91
38698.08
5679.91
44377.99

Amount

45000.00
127.65
1048.63 A
46176.28
451.28
46627.56
6836.84
53464.40

Amount

DSR-12

Page 1960 of 2298

58700.00
174.07
1276.46 A
60150.53
588.74
60739.27
8919.42
69658.69

Amount

71000.00
212.75
1538.87 A
72751.62
712.13
73463.75
10788.73
84252.48

Amount

82500.00
212.75
1801.28 A
84514.03
827.13
85341.16
12530.98
97872.14

DSR-12

Page 1961 of 2298

Amount

114500.00
319.13
2400.36 A
117219.49
1148.19
118367.68
17395.10
135762.78

100 mm diameter pipe.

Amount

68.00
126.00
11.40
10.07
7.94
301.00
273.00
494.00
1291.41
12.91
1304.32
195.65
1499.97

125 mm diameter pipe.

Amount

DSR-12

Page 1962 of 2298

80.00
166.50
22.80
14.14
14.14
451.50
409.50
741.00
1899.58
19.00
1918.58
287.79
2206.37

150 mm diameter pipe.

Amount

92.00
189.00
22.80
16.08
16.08
451.50
409.50
741.00
1937.96
19.38
1957.34
293.60
2250.94

Amount

120.00
252.00
22.80
20.14
20.14
602.00
546.00

DSR-12

Page 1963 of 2298

988.00
2571.08
25.71
2596.79
389.52
2986.31

250 mm diameter pipe.

Amount

160.00
292.50
34.20
26.15
26.15
752.50
682.50
1235.00
3209.00
32.09
3241.09
486.16
3727.25

300 mm diameter pipe.

Amount

216.00
337.50
45.60
30.22
30.22
903.00
819.00
1482.00
3863.54
38.64
3902.18
585.33
4487.51

DSR-12

Page 1964 of 2298

350 mm diameter pipe.

Amount

248.00
418.50
51.00
36.03
36.03
903.00
819.00
1482.00
3993.56
39.94
4033.50
605.03
4638.53

400 mm diameter pipe.

Amount

296.00
504.00
51.00
40.10
40.10
1204.00
1092.00
1976.00
5203.20
52.03
5255.23
788.28
6043.51

450 mm diameter pipe.

Amount

DSR-12

Page 1965 of 2298

316.00
544.50
68.10
46.29
46.29
1354.50
1228.50
2223.00
5827.18
58.27
5885.45
882.82
6768.27

500 mm diameter pipe.

Amount

340.00
589.50
68.10
50.17
50.17
1429.75
1296.75
2346.50
6170.94
61.71
6232.65
934.90
7167.55

600 mm diameter pipe.

Amount

408.00
756.00
85.20
60.05
60.05

DSR-12

Page 1966 of 2298

1956.50
1774.50
3211.00
8311.30
83.11
8394.41
1259.16
9653.57

Amount
9000.00
7.79
9007.79
90.08
9097.87
1364.68
10462.55

Amount

110.00
400.00
4.07
45.15
40.95
197.60
797.77
7.98
805.75
120.86
926.61

Amount

140.00
800.00

DSR-12

Page 1967 of 2298

6.20
75.25
68.25
247.00
1336.70
13.37
1350.07
202.51
1552.58

Amount

150.00
880.00
6.20
75.25
68.25
247.00
1426.70
14.27
1440.97
216.15
1657.12

Amount

170.00
1040.00
6.20
90.30
81.90
271.70
1660.10
16.60
1676.70
251.51
1928.21

DSR-12

Page 1968 of 2298

Amount

220.00
1040.00
6.20
90.30
81.90
271.70
1710.10
17.10
1727.20
259.08
1986.28

Amount

320.00
1680.00
7.94
120.40
109.20
321.10
2558.64
25.59
2584.23
387.63
2971.86

Amount

400.00
1680.00
7.94
120.40
109.20
321.10

DSR-12

Page 1969 of 2298

2638.64
26.39
2665.03
399.75
3064.78

Amount

450.00
2400.00
7.94
150.50
136.50
370.50
3515.44
35.15
3550.59
532.59
4083.18

Amount

670.00
4320.00
12.01
150.50
136.50
370.50
5659.51
56.60
5716.11
857.42
6573.53

Amount

DSR-12

Page 1970 of 2298

840.00
5400.00
12.01
180.60
163.80
419.90
7016.31
70.16
7086.47
1062.97
8149.44

Amount

1060.00
5800.00
12.01
195.65
177.45
444.60
7689.71
76.90
7766.61
1164.99
8931.60

Amount

1180.00
7000.00
14.14
225.75
204.75
494.00
9118.64
91.19
9209.83
1381.47
10591.30

DSR-12

Page 1971 of 2298

meter : Class I.
Amount

23000.00
34.17
824.47 A

3105.20 B
26963.84
230.34
27194.18
3489.68
30683.86

meter : Class II.

Amount

26500.00
43.50
1047.80 A

3105.20 B
30696.50
265.44
30961.94
4021.34
34983.28

meter : Class I.

DSR-12

Page 1972 of 2298

Amount

26000.00
43.50
1047.80 A

3314.20 B
30405.50
260.44
30665.94
3945.59
34611.53

meter : Class II.

Amount

32000.00
52.82

1271.13 A

3314.20 B
36638.15
320.53
36958.68
4856.00
41814.68

meter : Class I.
Amount

34100.00
55.92

DSR-12

Page 1973 of 2298

1349.30 A

3856.40 B
39361.62
341.56
39703.18
5174.62
44877.80

meter : Class II.

Amount

40000.00
67.18
1609.85 A

3856.40 B
45533.43
400.67
45934.10
6070.18
52004.28

meter : Class I.
Amount

65500.00
94.76
2261.24 A

3972.60 B

DSR-12

Page 1974 of 2298

71828.60
655.95
72484.55
9937.61
82422.16

meter : Class II.

Amount

91000.00
116.51
2800.96 A

3972.60 B
97890.07
911.17
98801.24
13804.15
112605.39

meter : Class I.
Amount

95500.00
139.81
3348.12 A

5943.80 B
104931.73
956.40
105888.13
14489.43
120377.56

DSR-12

Page 1975 of 2298

meter : Class II.

Amount

135000.00
178.64
4278.67 A

5943.80 B
145401.11
1351.79
146752.90
20479.56
167232.46

meter : Class I.
Amount

135000.00
187.96
4511.31 A

6129.60 B
145828.87
1351.88
147180.75
20480.98
167661.73

meter : Class II.

DSR-12

Page 1976 of 2298

Amount

170000.00
235.65
5646.58 A

6129.60 B
182011.83
1702.36
183714.19
25790.70
209504.89

x :- With F.P.S. bricks.

Amount

39.23 A
25.14 B

123.50 C

350.83 D

121.16 E
100.00
2.13

DSR-12

Page 1977 of 2298

109.89 F
-9.39
6.20
868.69
0.99
869.68
14.99
884.67

x :- With non modular bricks

Amount

190.94 A
122.35 B

463.12 C

1999.70 D

373.87 E
185.00
12.01

934.07 F

-79.04

DSR-12

Page 1978 of 2298

749.36 G

267.65 H
12.01
5231.04
1.30
5232.34
19.69
5252.03

e box :- With common burnt non-modular

Amount

372.72 A
238.83 B

710.12 C

3648.58 D

763.33 E
185.00
12.01

1483.53 F

DSR-12

Page 1979 of 2298

-125.97

1244.40 G

463.72 H
12.01
9008.28
0.83
9009.11
12.58
9021.69

box :- With F.P.S. bricks.

Amount

536.20 A
343.58 B

1018.87 C

4630.89 D

1111.24 E
185.00
12.01

DSR-12

Page 1980 of 2298

2252.77 F

-190.19

1862.06 G

715.81 H
12.01
12490.25
0.19
12490.44
2.85
12493.29

box :- With common burnt non-modular

Amount

190.94 A
122.35 B

463.12 C

1999.70 D

373.87 E
185.00
80.19

DSR-12

Page 1981 of 2298

714.29 F

-59.28

594.95 G

267.65 H
12.01
4944.79
2.18
4946.97
33.02
4979.99

surface box :- With common burnt non-

Amount

142.55 A
91.34 B

401.37 C

1227.89 D

228.48 E

DSR-12

Page 1982 of 2298

205.00
20.14

1208.80 F

-101.27

1012.78 G

320.56 H
12.01
4769.65
1.36
4771.01
20.59
4791.60

ing coat, : 15 mm diameter pipe.

Amount

13.94 A

36.25 B
20.14
70.33
0.20
70.53
3.05
73.58

DSR-12

Page 1983 of 2298

ing coat, : 20 mm diameter pipe.

Amount

17.51 A
45.52 B

20.14
83.17
0.20
83.37
3.05
86.42

ing coat, : 25 mm diameter pipe.

Amount

21.98 A
57.16 B

30.22
109.36
0.30
109.66
4.58
114.24

ing coat, : 32 mm diameter pipe.

Amount

DSR-12

Page 1984 of 2298

27.64 A
71.86 B

30.22
129.72
0.30
130.02
4.58
134.60

ing coat, : 40 mm diameter pipe.

Amount

31.49 A
81.88 B

40.10
153.47
0.40
153.87
6.08
159.95

ing coat, : 50mm diameter pipe.

Amount

39.24 A
102.03 B

40.10
181.37
0.40
181.77
6.08
187.85

DSR-12

Page 1985 of 2298

15 mm diameter pipe.

Amount
23.68 A
12.01
35.69
0.12
35.81
1.82
37.63

20 mm diameter pipe.

Amount
29.74 A
12.01
41.75
0.12
41.87
1.82
43.69

25 mm diameter pipe.

Amount
37.34 A
16.08
53.42
0.16
53.58
2.44
56.02

DSR-12

Page 1986 of 2298

32 mm diameter pipe.

Amount
46.94 A
16.27
63.21
0.16
63.37
2.46
65.83

40 mm diameter pipe.

Amount
53.49 A
20.14
73.63
0.20
73.83
3.05
76.88

50 mm diameter pipe.

Amount
66.65 A
20.14
86.79
0.20
86.99
3.05
90.04

pe
Amount
29.99 A
12.01

DSR-12

Page 1987 of 2298

42.00
0.12
42.12
1.82
43.94

pe
Amount
37.65 A
12.01
49.66
0.12
49.78
1.82
51.60

pe
Amount
47.28 A
16.08
63.36
0.16
63.52
2.44
65.96

pe
Amount
59.44 A
16.08
75.52
0.16
75.68
2.44
78.12

DSR-12

Page 1988 of 2298

pe
Amount
67.73 A
18.21
85.94
0.18
86.12
2.76
88.88

pe
Amount
84.40 A
18.21
102.61
0.18
102.79
2.76
105.55

Amount
106.36 A
20.14
126.50
0.20
126.70
3.05
129.75

DSR-12

Page 1989 of 2298

Amount
124.59 A
22.08
146.67
0.22
146.89
3.35
150.24

mm diameter pipe
Amount

471.38
471.38
4.71
476.09
71.41
547.50

mm diameter pipe
Amount

DSR-12

Page 1990 of 2298

477.75
477.75
4.78
482.53
72.38
554.91

mm diameter pipe
Amount

490.49
490.49
4.90
495.39
74.31
569.70

mm diameter pipe
Amount

DSR-12

Page 1991 of 2298

503.23
503.23
5.03
508.26
76.24
584.50

mm diameter pipe
Amount

509.60
509.60
5.10
514.70
77.21
591.91

mm diameter pipe
Amount

528.71

DSR-12

Page 1992 of 2298

528.71
5.29
534.00
80.10
614.10

Amount

834.47
834.47
8.34
842.81
126.42
969.23

Amount

859.95
859.95
8.60
868.55

DSR-12

Page 1993 of 2298

130.28
998.83

Amount

910.91
910.91
9.11
920.02
138.00
1058.02

Amount

1356.81
1356.81
13.57
1370.38
205.56
1575.94

DSR-12

Page 1994 of 2298

Amount

150.50
741.00
387.50
40.20
20.14
1339.34
13.39
1352.73
202.91
1555.64

pth.
Amount

186.62
864.50
480.50
40.20
20.14
1591.96
15.92
1607.88
241.18
1849.06

epth.
Amount

225.75
988.00
581.25

DSR-12

Page 1995 of 2298

40.20
20.14
1855.34
18.55
1873.89
281.08
2154.97

Amount

495.00
20.14
51.17
41.99
10.65
618.95
6.19
625.14
93.77
718.91

Amount

2060.40
2.90
10.07
99.33
185.25
10.80
2368.75
23.69
2392.44
358.87
2751.31

DSR-12

Page 1996 of 2298

Amount

550.00
20.14
30.10
24.70
6.59
631.53
6.32
637.85
95.68
733.53

: 15 mm nominal bore

Amount
40.00
2.71
33.11
27.17
102.99
1.03
104.02
15.60
119.62

- 20 mm nominal bore

Amount
60.00
2.71
33.11
27.17
122.99
1.23
124.22
18.63
142.85

DSR-12

Page 1997 of 2298

Amount
70.00
2.71
33.11
27.17
132.99
1.33
134.32
20.15
154.47

32 mm nominal bore

Amount
100.00
2.71
33.11
27.17
162.99
1.63
164.62
24.69
189.31

40 mm nominal bore

Amount
135.00
2.71
33.11
27.17
197.99
1.98
199.97
30.00
229.97

DSR-12

Page 1998 of 2298

50 mm nominal bore

Amount
180.00
2.71
45.15
37.05
264.91
2.65
267.56
40.13
307.69

Amount

390.00
2.71
45.15
37.05
474.91
4.75
479.66
71.95
551.61

Amount

480.00
2.71
45.15
37.05
564.91
5.65
570.56
85.58

DSR-12

Page 1999 of 2298

656.14

ng ...complete wherever required : 15 mm

Amount
40.00
2.71
99.33
81.51
223.55
2.24
225.79
33.87
259.66

- 20mm nominal bore

Amount
60.00
2.71
99.33
81.51
243.55
2.44
245.99
36.90
282.89

- 25 mm nominal bore

Amount
70.00
2.71
99.33

DSR-12

Page 2000 of 2298

81.51
253.55
2.54
256.09
38.41
294.50

- 32 mm nominal bore

Amount
100.00
2.71
99.33
81.51
283.55
2.84
286.39
42.96
329.35

- 40 mm nominal bore

Amount
135.00
2.71
99.33
81.51
318.55
3.19
321.74
48.26
370.00

-50 mm nominal bore

Amount

DSR-12

Page 2001 of 2298

180.00
2.71
135.45
111.15
429.31
4.29
433.60
65.04
498.64

15 mm nominal bore

Amount
390.00
2.71
135.45
111.15
639.31
6.39
645.70
96.86
742.56

Amount

480.00
2.71
135.45
111.15
729.31
7.29
736.60
110.49
847.09

DSR-12

Page 2002 of 2298

ings and the base support for tank

Amount
2225.00
267.31
133.65
2625.96
26.26
2652.22
397.83
3050.05

Amount
325.00
17.24
342.24
3.42
345.66
51.85
397.51

ng not less than 810 gms -15 mm nominal

Amount
330.00
24.21
354.21
3.54
357.75
53.66
411.41

weighing not less than 690 gms. 15 mm

DSR-12

Page 2003 of 2298

Amount

350.00
20.73
370.73
3.71
374.44
56.17
430.61

Amount
350.00
17.24
367.24
3.67
370.91
55.64
426.55

mm nominal bore
Amount
370.00
16.85
386.85
3.87
390.72
58.61
449.33

not less than 88 gms.

Amount
100.00
12.01
112.01

DSR-12

Page 2004 of 2298

1.12
113.13
16.97
130.10

. not less than 99 gms.

Amount
140.00
12.01
152.01
1.52
153.53
23.03
176.56

t. not less than 110 gms.

Amount
160.00
12.01
172.01
1.72
173.73
26.06
199.79

not less than 93 gms.

Amount
133.00
12.01
145.01
1.45
146.46
21.97
168.43

DSR-12

Page 2005 of 2298

t. not less than 88 gms.

Amount
100.00
12.01
112.01
1.12
113.13
16.97
130.10

not less than 88 gms.

Amount
130.00
12.01
142.01
1.42
143.43
21.51
164.94

. not less than 108 gms.

Amount
173.00
12.01
185.01
1.85
186.86
28.03
214.89

DSR-12

Page 2006 of 2298

Wt. not less than 110 gms.

Amount
160.00
14.14
174.14
1.74
175.88
26.38
202.26

oam flow. Wt. not less than 120 gms.

Amount
225.00
14.14
239.14
2.39
241.53
36.23
277.76

t. not less than 75 gms.

Amount
90.00
12.01
102.01
1.02
103.03
15.45
118.48

t. not less than 46 gms.

Amount
80.00

DSR-12

Page 2007 of 2298

12.01
92.01
0.92
92.93
13.94
106.87

Amount
31.00
6.20
37.20
0.37
37.57
5.64
43.21

25 mm waste hole.
Amount
37.00
6.20
43.20
0.43
43.63
6.54
50.17

mm size square 100 mm dia. of the inner

Amount
101.00
6.20
107.20
1.07
108.27

DSR-12

Page 2008 of 2298

16.24
124.51

Amount

33700.00
38.74
58.11

926.60 A
34723.45
337.97
35061.42
5120.22
40181.64

Amount

49300.00
38.74
58.11

926.60 A
50323.45
493.97
50817.42
7483.62
58301.04

Amount

64000.00

DSR-12

Page 2009 of 2298

38.74
77.48

1552.60 A
65668.82
641.16
66309.98
9713.61
76023.59

mm dia nominal bore.

Amount

2030.00
193.70
38.74
58.11

185.32 A
2505.87
23.21
2529.08
351.56
2880.64

mm dia nominal bore.

Amount

3150.00
193.70
38.74
77.48

310.52 A
3770.44
34.60
3805.04
524.18
4329.22

DSR-12

Page 2010 of 2298

mm dia nominal bore.

Amount

4560.00
232.44
58.11
96.85

385.64 A
5333.04
49.47
5382.51
749.53
6132.04

mm dia nominal bore.

Amount

5100.00
232.44
77.48
154.96

397.26 A
5962.14
55.65
6017.79
843.08
6860.87

Amount

DSR-12

Page 2011 of 2298

2620.00
38.74
58.11

185.32 A
2902.17
27.17
2929.34
411.60
3340.94

Amount

4180.00
38.74
77.48

310.52 A
4606.74
42.96
4649.70
650.88
5300.58

Amount

5420.00
58.11
96.85

385.64 A
5960.60
55.75
6016.35
844.61
6860.96

DSR-12

Page 2012 of 2298

Amount

7550.00
77.48
154.96

397.26 A
8179.70
77.82
8257.52
1179.04
9436.56

m nominal bore, 105 mm long. Wt. not less

Amount
134.00
32.15
166.15
1.66
167.81
25.17
192.98

m nominal bore, 120 mm long. Wt. not less

Amount
195.00
40.10
235.10
2.35
237.45
35.62
273.07

DSR-12

Page 2013 of 2298

m nominal bore, 152mm long. Wt. not less

Amount
420.00
48.04
468.04
4.68
472.72
70.91
543.63

m nominal bore, 206mm long. Wt. not less

Amount
780.00
48.04
828.04
8.28
836.32
125.45
961.77

Amount
1150.00
48.04
1198.04
11.98
1210.02
181.50
1391.52

DSR-12

Page 2014 of 2298

Amount
130.00
12.01
142.01
1.42
143.43
21.51
164.94

Amount
87.00
10.07
97.07
0.97
98.04
14.71
112.75

mm with concealed fitting arrangements.

Amount
120.00
10.07
130.07
1.30
131.37
19.71
151.08

per IS : 1538: Upto 300 mm diametre.

DSR-12

Page 2015 of 2298

Amount
5850.00
7.77
186.11 A
6043.88
58.58
6102.46
887.45
6989.91

per IS : 1538: Above 300 mm diametre.

Amount
7500.00
7.77
186.11 A
7693.88
75.08
7768.96
1137.43
8906.39

0 mm diametre.
Amount
8200.00
7.77
186.11 A
8393.88
82.08
8475.96
1243.48
9719.44

00 mm diametre.

DSR-12

Page 2016 of 2298

Amount
8880.00
7.77
186.11 A
9073.88
88.88
9162.76
1346.50
10509.26

diametre.
Amount
11850.00
7.77
186.11 A
12043.88
118.58
12162.46
1796.45
13958.91

diametre.
Amount
16280.00
7.77
186.11 A
16473.88
162.88
16636.76
2467.60
19104.36

DSR-12

Page 2017 of 2298

Amount
12540.00
7.77
186.11 A
12733.88
125.48
12859.36
1900.99
14760.35

Amount
17580.00
7.77
186.11 A
17773.88
175.88
17949.76
2664.55
20614.31

e cost of rubber gasket : 100 mm diametre

Amount

1300.00
301.00
273.00
247.00
2121.00
21.21
2142.21
321.33
2463.54

DSR-12

Page 2018 of 2298

e cost of rubber gasket : 150 mm diametre

Amount

1800.00
451.50
409.50
741.00
3402.00
34.02
3436.02
515.40
3951.42

e cost of rubber gasket : 200 mm diametre

Amount
3100.00
602.00
546.00
988.00
5236.00
52.36
5288.36
793.25
6081.61

e cost of rubber gasket : 250 mm diametre

Amount
3650.00
752.50
682.50
1235.00
6320.00
63.20
6383.20
957.48
7340.68

DSR-12

Page 2019 of 2298

e cost of rubber gasket : 300 mm diametre

Amount
5150.00
903.00
819.00
1482.00
8354.00
83.54
8437.54
1265.63
9703.17

e cost of rubber gasket : 350 mm diametre

Amount
6350.00
903.00
819.00
1482.00
9554.00
95.54
9649.54
1447.43
11096.97

e cost of rubber gasket : 400 mm diametre

Amount
11700.00
1204.00
1092.00
1976.00
15972.00
159.72
16131.72

DSR-12

Page 2020 of 2298

2419.76
18551.48

e cost of rubber gasket : 450 mm diametre

Amount
13000.00
1354.50
1228.50
2223.00
17806.00
178.06
17984.06
2697.61
20681.67

e cost of rubber gasket : 500 mm diametre

Amount
14250.00
1429.75
1296.75
2346.50
19323.00
193.23
19516.23
2927.43
22443.66

e cost of rubber gasket : 600 mm diametre

Amount
17600.00
1956.50
1774.50
3211.00

DSR-12

Page 2021 of 2298

24542.00
245.42
24787.42
3718.11
28505.53

e cost of rubber gasket : 650 mm diametre

Amount
27100.00
2317.70
2102.10
3803.80
35323.60
353.24
35676.84
5351.53
41028.37

e cost of rubber gasket : 700 mm diametre

Amount
31800.00
2317.70
2102.10
3803.80
40023.60
400.24
40423.84
6063.58
46487.42

e cost of rubber gasket : 800 mm diametre

Amount
34200.00

DSR-12

Page 2022 of 2298

2558.50
2320.50
4199.00
43278.00
432.78
43710.78
6556.62
50267.40

e cost of rubber gasket : 900 mm diametre

Amount
45750.00
3010.00
2730.00
4940.00
56430.00
564.30
56994.30
8549.15
65543.45

ng the cost of rubber gasket : 1000 mm

Amount
56900.00
3311.00
3003.00
5434.00
68648.00
686.48
69334.48
10400.17
79734.65

(IS : 1536): 100 mm diametre C.I. Double

Amount

DSR-12

Page 2023 of 2298

6300.00
9.57
137.31 A
6446.88
63.10
6509.98
955.90
7465.88

(IS : 1536): 150 mm diametre C.I. Double

Amount

9800.00
15.96
224.78 A

10040.74
98.16
10138.90
1487.12
11626.02

(IS : 1536): 200 mm diametre C.I. Double

Amount

15850.00
25.96
323.44 A

16199.40

DSR-12

Page 2024 of 2298

158.76
16358.16
2405.21
18763.37

(IS : 1536): 250 mm diametre C.I. Double

Amount

18650.00
36.88
434.30 A

19121.18
186.87
19308.05
2831.06
22139.11

(IS : 1536): 300 mm diametre C.I. Double

Amount

23850.00
45.59
559.41 A

24455.00
238.96
24693.96
3620.18
28314.14

DSR-12

Page 2025 of 2298

(IS : 1536): 350 mm diametre C.I. Double

Amount

30400.00
63.83

690.61 A

31154.44
304.64
31459.08
4615.27
36074.35

(IS : 1536): 400 mm diametre C.I. Double

Amount

39450.00
87.03
848.26 A
40385.29
395.37
40780.66
5989.86
46770.52

(IS : 1536): 450 mm diametre C.I. Double

Amount

49700.00

DSR-12

Page 2026 of 2298

106.38
1025.24 A

50831.62
498.06
51329.68
7545.67
58875.35

(IS : 1536): 500 mm diametre C.I. Double

Amount

61950.00
106.38
1194.08 A

63250.46
620.56
63871.02
9401.54
73272.56

(IS : 1536): 600 mm diametre C.I. Double

Amount

76650.00
159.56
1603.97 A

78413.53
768.10
79181.63
11636.65
90818.28

DSR-12

Page 2027 of 2298

metre Ductile iron Class K - 7 pipes.

Amount

7080.00
19.15
156.63 A
7255.78
70.99
7326.77
1075.52
8402.29

metre Ductile iron Class K - 7 pipes.

Amount

10350.00
31.91
231.90 A
10613.81
103.82
10717.63
1572.86
12290.49

metre Ductile iron Class K - 7 pipes.

Amount

DSR-12

Page 2028 of 2298

14150.00
51.91
306.15 A
14508.06
142.02
14650.08
2151.59
16801.67

metre Ductile iron Class K - 7 pipes.

Amount

19200.00
73.77
399.72 A
19673.49
192.74
19866.23
2919.98
22786.21

metre Ductile iron Class K - 7 pipes.

Amount

26380.00
91.18
492.28 A
26963.46
264.71
27228.17
4010.38
31238.55

DSR-12

Page 2029 of 2298

metre Ductile iron Class K - 7 pipes.

Amount

31350.00
127.65
671.29 A
32148.94
314.78
32463.72
4768.86
37232.58

metre Ductile iron Class K - 7 pipes.

Amount

37140.00
174.07
796.39 A
38110.46
373.14
38483.60
5653.08
44136.68

metre Ductile iron Class K - 7 pipes.

Amount

DSR-12

Page 2030 of 2298

44110.00
212.75
929.63 A
45252.38
443.23
45695.61
6714.90
52410.51

metre Ductile iron Class K - 7 pipes.

Amount

52140.00
212.75
1084.23 A
53436.98
523.53
53960.51
7931.44
61891.95

metre Ductile iron Class K - 7 pipes.

Amount

68010.00
319.13
1409.70 A
69738.83
683.29
70422.12
10351.86

DSR-12

Page 2031 of 2298

80773.98

metre Ductile iron Class K - 7 pipes.

Amount

87390.00
319.13
1921.30 A
89630.43
877.09
90507.52
13287.93
103795.45

metre Ductile iron Class K - 7 pipes.

Amount

111560.00
319.13
2476.64 A
114355.77
1118.79
115474.56
16949.69
132424.25

metre Ductile iron Class K - 7 pipes.

Amount

DSR-12

Page 2032 of 2298

146170.00
478.69
2875.34 A
149524.03
1466.49
150990.52
22217.28
173207.80

etre Ductile iron Class K - 7 pipes.

Amount

154850.00
638.25
3541.54 A
159029.79
1554.88
160584.67
23556.47
184141.14

metre Ductile iron Class K - 9 pipes.

Amount

7970.00
19.15
180.64 A
8169.79
79.89
8249.68
1210.36

DSR-12

Page 2033 of 2298

9460.04

metre Ductile iron Class K - 9 pipes.

Amount

11700.00
31.91
267.19 A
11999.10
117.32
12116.42
1777.38
13893.80

metre Ductile iron Class K - 9 pipes.

Amount

15950.00
51.91
367.68 A
16369.59
160.02
16529.61
2424.29
18953.90

metre Ductile iron Class K - 9 pipes.

Amount

DSR-12

Page 2034 of 2298

21050.00
73.77
488.21 A
21611.98
211.24
21823.22
3200.25
25023.47

metre Ductile iron Class K - 9 pipes.

Amount

26800.00
91.18
615.24 A
27506.42
268.91
27775.33
4074.01
31849.34

Ductile Iron Class K-9 pipes

Amount

32250.00
127.65
810.93 A
33188.58
323.78

DSR-12

Page 2035 of 2298

33512.36
4905.21
38417.57

metre Ductile iron Class K - 9 pipes.

Amount

43500.00
174.07
964.21 A
44638.28
436.74
45075.02
6616.62
51691.64

metre Ductile iron Class K - 9 pipes.

Amount

50850.00
212.75
1128.68 A
52191.43
510.63
52702.06
7736.01
60438.07

metre Ductile iron Class K - 9 pipes.

DSR-12

Page 2036 of 2298

Amount

61800.00
212.75
1316.94 A
63329.69
620.13
63949.82
9394.93
73344.75

metre Ductile iron Class K - 9 pipes.

Amount

74300.00
319.13
1715.64 A
76334.77
746.19
77080.96
11304.80
88385.76

metre Ductile iron Class K - 9 pipes.

Amount

100500.00
212.75
2212.60 A
102925.35
1007.13

DSR-12

Page 2037 of 2298

103932.48
15257.98
119190.46

metre Ductile iron Class K - 9 pipes.

Amount

113500.00
478.69
2467.48 A
116446.17
1139.79
117585.96
17267.77
134853.73

metre Ductile iron Class K - 9 pipes.

Amount

119900.00
638.25
2716.67 A
123254.92
1205.38
124460.30
18261.54
142721.84

metre Ductile iron Class K - 9 pipes.

DSR-12

Page 2038 of 2298

Amount

140300.00
638.25
3267.84 A
144206.09
1409.38
145615.47
21352.14
166967.61

etre Ductile iron Class K - 9 pipes.

Amount

157500.00
638.28
3866.91 A
162005.19
1581.38
163586.57
23957.95
187544.52

pipes class -9 IS : 8329: 100 mm diametre

Amount

10125.00
9.57
110.86 A
10245.43
101.35

DSR-12

Page 2039 of 2298

10346.78
1535.39
11882.17

pipes class -9 IS : 8329: 150 mm diametre

Amount

14125.00
15.96
165.79 A
14306.75
141.41
14448.16
2142.36
16590.52

pipes class -9 IS : 8329: 200 mm diametre

Amount

18700.00
25.96
224.78 A
18950.74
187.26
19138.00
2836.98
21974.98

pipes class -9 IS : 8329: 250 mm diametre

DSR-12

Page 2040 of 2298

Amount

24675.00
36.88
302.08 A
25013.96
247.12
25261.08
3743.85
29004.93

pipes class -9 IS : 8329: 300 mm diametre

Amount

31650.00
45.59
388.53 A
32084.12
316.96
32401.08
4801.88
37202.96

pipes class -9 IS : 8329: 350 mm diametre

Amount

40100.00
63.83
464.81 A
40628.64
401.64

DSR-12

Page 2041 of 2298

41030.28
6084.82
47115.10

pipes class -9 IS : 8329: 400 mm diametre

Amount

48225.00
87.03
549.23 A
48861.26
483.12
49344.38
7319.27
56663.65

pipes class -9 IS : 8329: 450 mm diametre

Amount

58375.00
106.38
649.93 A
59131.31
584.81
59716.12
8859.93
68576.05

pipes class -9 IS : 8329: 500 mm diametre

DSR-12

Page 2042 of 2298

Amount

69475.00
106.38
752.65 A
70334.03
695.81
71029.84
10541.58
81571.42

pipes class -9 IS : 8329: 600 mm diametre

Amount

93800.00
159.56
1012.01 A
94971.57
939.60
95911.17
14234.87
110146.04

pipes class -9 IS : 8329: 700 mm diametre

Amount

116375.00
106.38
1296.80 A
117778.18
1164.81

DSR-12

Page 2043 of 2298

118942.99
17646.93
136589.92

with 30cm length.

Amount
33.00
18.21
51.21
0.51
51.72
7.76
59.48

with 45 cm length
Amount
38.00

20.14
58.14
0.58
58.72
8.81
67.53

s than 32 gms.
Amount
32.00
5.04
37.04
0.37
37.41
5.61
43.02

DSR-12

Page 2044 of 2298

0gms.
Amount
38.00
5.04
43.04
0.43
43.47
6.52
49.99

weighing not less than 62 grams.

Amount
57.00
5.04
62.04
0.62
62.66
9.40
72.06

Amount

48.16
43.68
308.75

854.25 A

DSR-12

Page 2045 of 2298

158.53 B

24.02
12.01
1449.40
4.37
1453.77
66.15
1519.92

ng finishing complete so as to make it leak

Amount
249.83
226.59
412.49

90.28 A
180.53
60.05
32.15
1251.92
11.62
1263.54
175.99
1439.53

Amount

75.25
68.25
247.00

DSR-12

Page 2046 of 2298

191.29 A
581.79
3.91
585.70
59.16
644.86

Amount

1052.12 A

20.14
1072.26
0.20
1072.46
3.05
1075.51

pipe.
Amount

14.00
99.33
323.57
14.72
451.62
4.52
456.14
68.42
524.56

I. pipe.

DSR-12

Page 2047 of 2298

Amount

21.00
147.49
405.08
20.14
593.71
5.94
599.65
89.95
689.60

I. pipe.
Amount

31.50
198.66
486.59
26.73
743.48
7.43
750.91
112.64
863.55

I. pipe.
Amount

47.25
246.82
568.10
34.09
896.26
8.96
905.22
135.78
1041.00

DSR-12

Page 2048 of 2298

I. pipe.
Amount

82.25
346.15
728.65
46.88
1203.93
12.04
1215.97
182.40
1398.37

I. pipe.
Amount

129.50
445.48
891.67
60.05
1526.70
15.27
1541.97
231.30
1773.27

I. pipe.
Amount

185.50
493.64
973.18
66.25

DSR-12

Page 2049 of 2298

1718.57
17.19
1735.76
260.36
1996.12

I. pipe.
Amount

252.00
541.80
1054.69
72.06
1920.55
19.21
1939.76
290.96
2230.72

I. pipe.
Amount

330.75
592.97
1133.73
80.19
2137.64
21.38
2159.02
323.85
2482.87

I. pipe.
Amount

DSR-12

Page 2050 of 2298

418.25
641.13
1215.24
86.78
2361.40
23.61
2385.01
357.75
2742.76

I. pipe.
Amount

516.25
692.30
1296.75
94.91
2600.21
26.00
2626.21
393.93
3020.14

I. pipe.
Amount

742.00
788.62
1459.77
106.34
3096.73
30.97
3127.70
469.16
3596.86

DSR-12

Page 2051 of 2298

g bleaching powder at 0.5 gms per litre of

Amount
5.25
33.11
121.03
6.59
165.98
1.66
167.64
25.15
192.79

g bleaching powder at 0.5 gms per litre of

Amount
7.00
48.16
140.79
6.59
202.54
2.03
204.57
30.69
235.26

g bleaching powder at 0.5 gms per litre of

Amount
10.50
66.22
163.02
8.14
247.88
2.48
250.36
37.55
287.91

DSR-12

Page 2052 of 2298

g bleaching powder at 0.5 gms per litre of

Amount
15.75
81.27
182.78
10.65
290.45
2.90
293.35
44.00
337.35

g bleaching powder at 0.5 gms per litre of

Amount
28.00
174.58
222.30
14.72
439.60
4.40
444.00
66.60
510.60

g bleaching powder at 0.5 gms per litre of

Amount
43.75
180.60
271.70
16.08
512.13
5.12
517.25
77.59
594.84

DSR-12

Page 2053 of 2298

g bleaching powder at 0.5 gms per litre of

Amount
61.25
180.60
321.10
20.14
583.09
5.83
588.92
88.34
677.26

g bleaching powder at 0.5 gms per litre of

Amount
84.00
210.70
370.50
24.02
689.22
6.89
696.11
104.42
800.53

g bleaching powder at 0.5 gms per litre of

Amount
110.25
240.80
419.90
26.73
797.68
7.98
805.66
120.85

DSR-12

Page 2054 of 2298

926.51

g bleaching powder at 0.5 gms per litre of

Amount
140.00
270.90
469.30
30.80
911.00
9.11
920.11
138.02
1058.13

g bleaching powder at 0.5 gms per litre of

Amount
171.50
301.00
518.70
34.67
1025.87
10.26
1036.13
155.42
1191.55

g bleaching powder at 0.5 gms per litre of

Amount
246.75
361.20
617.50
38.74
1264.19

DSR-12

Page 2055 of 2298

12.64
1276.83
191.52
1468.35

pipes : 80 mm diameter C.I. pipe.

Amount

2133.02 A
1366.78 B

167.85
11.37
136.50
988.00
80.19
4883.71
13.84
4897.55
209.66
5107.21

pipes : 100 mm diametre C.I. pipe.

Amount

2114.71 A
1355.05 B

209.70
11.37

DSR-12

Page 2056 of 2298

171.99
1111.50
80.19
5054.51
15.85
5070.36
240.09
5310.45

pipes : 125 mm diametre C.I. pipe.

Amount

2087.25 A
1337.45 B

251.55
17.04
204.75
1235.00
80.19
5213.23
17.89
5231.12
270.96
5502.08

pipes : 150 mm diametre C.I. pipe.

Amount

2053.25 A
1315.66 B

DSR-12

Page 2057 of 2298

293.85
17.04
242.15
1358.50
100.14
5380.59
20.12
5400.71
304.77
5705.48

pipes : 200 mm diametre C.I. pipe.

Amount

2165.72 A
1387.73 B

378.00
22.73
300.30
1605.50
100.14
5960.12
24.07
5984.19
364.61
6348.80

pipes : 250 mm diametre C.I. pipe.

Amount

DSR-12

Page 2058 of 2298

2257.26 A
1446.39 B

461.70
34.10
354.90
1852.50
120.29
6527.14
28.23
6555.37
427.76
6983.13

pipes : 300 mm diametre C.I. pipe.

Amount

2326.58 A
1490.80 B

504.00
45.45
409.50
2099.50
140.24
7016.07
31.99
7048.06
484.60
7532.66

pipes : 350 mm diametre C.I. pipe.

DSR-12

Page 2059 of 2298

Amount

2372.35 A
1520.13 B

545.85
45.45
477.75
2346.50
160.38
7468.41
35.76
7504.17
541.75
8045.92

pipes : 400 mm diametre C.I. pipe.

Amount

2384.12 A
1527.67 B

587.70
56.82
546.00
2593.50
180.33
7876.14
39.64
7915.78
600.60
8516.38

DSR-12

Page 2060 of 2298

pipes : 450 mm diametre C.I. pipe.

Amount

2403.74 A
1540.24 B

630.00
68.19
614.25
2840.50
200.48
8297.40
43.53
8340.93
659.54
9000.47

pipes : 500 mm diametre C.I. pipe.

Amount

2385.43 A
1528.51 B

671.40
79.56
682.50
3087.50
220.43
8655.33
47.41
8702.74
718.32
9421.06

DSR-12

Page 2061 of 2298

pipes : 600 mm diametre C.I. pipe.

Amount

2280.80 A
1461.47 B

756.00
102.30
819.00
3581.50
260.53
9261.60
55.19
9316.79
836.18
10152.97

Amount

18.06
14.82
2.71
35.59
0.36
35.95
5.39
41.34

Amount

DSR-12

Page 2062 of 2298

24.08
19.76
4.07
47.91
0.48
48.39
7.26
55.65

Amount

33.11
27.17
6.59
66.87
0.67
67.54
10.13
77.67

Amount

45.15
37.05
7.94
90.14
0.90
91.04
13.66
104.70

Amount

60.20

DSR-12

Page 2063 of 2298

49.40
10.65
120.25
1.20
121.45
18.22
139.67

Amount

75.25
61.75
12.01
149.01
1.49
150.50
22.58
173.08

Amount

90.30
74.10
14.72
179.12
1.79
180.91
27.14
208.05

Amount

105.35
86.45
16.08
207.88

DSR-12

Page 2064 of 2298

2.08
209.96
31.49
241.45

Amount

120.40
98.80
18.60
237.80
2.38
240.18
36.03
276.21

Amount

135.45
111.15
20.14
266.74
2.67
269.41
40.41
309.82

Amount

150.50
123.50
22.66
296.66
2.97
299.63
44.94

DSR-12

Page 2065 of 2298

344.57

Amount

180.60
148.20
24.02
352.82
3.53
356.35
53.45
409.80

ck, having foam flow technology - 15 mm

Amount
5822.50
12.01
5834.51
58.35
5892.86
883.93
6776.79

testing of joints etc. Complete : 100 mm

Amount
1980.00
38.54

95.00
1.48
6.40
0.88
180.00

DSR-12

Page 2066 of 2298

301.00
273.00
741.00
260.00
3877.30
38.77
3916.07
587.41
4503.48

testing of joints etc. Complete : 150 mm

Amount
2915.00
77.09

180.00
2.80
12.16
1.66
360.00

451.50
409.50
988.00
260.00
5657.71
56.58
5714.29
857.14
6571.43

testing of joints etc. Complete : 200 mm

Amount
5005.00
128.48

265.00
4.13
17.92
2.45

DSR-12

Page 2067 of 2298

480.00

526.75
477.75
1111.50
325.00
8343.98
83.44
8427.42
1264.11
9691.53

testing of joints etc. Complete : 250 mm

Amount
7150.00
220.25
470.00
7.32
32.00
4.38
600.00

677.25
614.25
1358.50
390.00
11523.95
115.24
11639.19
1745.88
13385.07

testing of joints etc. Complete : 250 mm

Amount
7150.00
220.25

470.00
7.32

DSR-12

Page 2068 of 2298

32.00
4.38
600.00

677.25
614.25
1358.50
390.00
11523.95
115.24
11639.19
1745.88
13385.07

al size) all-round S.W. pipes .. ..: 100 mm

Amount

4968.92 A
4968.92
0.00
4968.92
0.00
4968.92

al size) all-round S.W. pipes .. ..: 150 mm

Amount

DSR-12

Page 2069 of 2298

6076.86 A
6076.86
0.00
6076.86
0.00
6076.86

al size) all-round S.W. pipes .. .. 200 mm

Amount

7084.07 A
7084.07
0.00
7084.07
0.00
7084.07

al size) all-round S.W. pipes .. .. 250 mm

Amount

DSR-12

Page 2070 of 2298

8192.01 A
8192.01
0.00
8192.01
0.00
8192.01

e)up to haunches.. including bed concrete

Amount

2361.58 A
2361.58
0.00
2361.58
0.00
2361.58

al size) all-round S.W. pipes .. ..: 150 mm

Amount

DSR-12

Page 2071 of 2298

3827.41 A
3827.41
0.00
3827.41
0.00
3827.41

al size) all-round S.W. pipes .. ..: 200 mm

Amount

DSR-12

Page 2072 of 2298

4498.89 A
4498.89
0.00
4498.89
0.00
4498.89

al size) all-round S.W. pipes .. ..: 250 mm

Amount

5237.51 A
5237.51
0.00
5237.51
0.00
5237.51

al size) all-round S.W. pipes .. ..: 250 mm

Amount

DSR-12

Page 2073 of 2298

5237.51 A
5237.51
0.00
5237.51
0.00
5237.51

mm : 100x100 mm size P type With F.P.S.

Amount
70.00
15.00
280.00
6.71

DSR-12

Page 2074 of 2298

277.87 A

456.07 B

42.18 C

50.20 D
1198.03
3.72
1201.75
56.31
1258.06

mm : 100x100 mm size P typeWith Sewer

Amount
70.00
15.00
280.00
6.71

277.87 A

493.32 B

DSR-12

Page 2075 of 2298

42.18 C

50.20 D
1235.28
3.72
1239.00
56.31
1295.31

mm : 150 x 100 mm size P type With F.P.S.

Amount
104.00
25.00
280.00
6.71

247.00 A

456.07 B

42.18 C

51.93 D
1212.89
4.16
1217.05
62.98
1280.03

DSR-12

Page 2076 of 2298

00 mm size P type : With Sewer bricks IS:

Amount
104.00
25.00
280.00
6.71

247.00 A

493.32 B

42.18 C

51.93 D
1250.14
4.16
1254.30
62.98
1317.28

mm size P type : With F.P.S. bricks.

Amount

DSR-12

Page 2077 of 2298

195.00
30.00
280.00
6.71

247.00 A

456.07 B

42.18 C

27.69 D
1284.65
5.12
1289.77
77.52
1367.29

50 mm size P type : With Sewer bricks IS:

Amount
195.00
30.00
280.00
6.71

DSR-12

Page 2078 of 2298

247.00 A

493.32 B

42.18 C

27.69 D
1321.90
5.12
1327.02
77.52
1404.54

meter.
Amount
121.03
88.92
209.95
2.10
212.05
31.81
243.86

meter.
Amount
121.03
111.15
232.18
2.32
234.50
35.18

DSR-12

Page 2079 of 2298

269.68

meter.
Amount
121.03
125.97
247.00
2.47
249.47
37.42
286.89

meter.
Amount
121.03
140.79
261.82
2.62
264.44
39.67
304.11

meter.
Amount
121.03
155.61
276.64
2.77
279.41
41.91
321.32

meter.

DSR-12

Page 2080 of 2298

Amount
148.20
170.43
318.63
3.19
321.82
48.27
370.09

meter.
Amount
163.02
185.25
348.27
3.48
351.75
52.76
404.51

meter.
Amount
163.02
200.07
363.09
3.63
366.72
55.01
421.73

the proportion of 1:2 -complete : 100 mm

Amount
1350.00
100.00
19.15
25.00

DSR-12

Page 2081 of 2298

0.39
3.84
0.53
96.32
87.36
155.61
41.60
1879.80
18.80
1898.60
284.79
2183.39

the proportion of 1:2 -complete : 150 mm

Amount
1540.00
125.00
31.91
30.00

0.47
5.12
0.70
117.39
106.47
192.66
41.60
2191.32
21.91
2213.23
331.98
2545.21

the proportion of 1:2 -complete : 250 mm

Amount
1880.00
200.00
73.77
45.00

DSR-12

Page 2082 of 2298

0.70
7.68
1.05
162.54
147.42
370.50
59.80
2948.46
29.48
2977.94
446.69
3424.63

the proportion of 1:2 -complete : 300 mm

Amount
2610.00
196.00
91.18
55.00

0.86
9.60
1.31
177.59
161.07
286.52
52.00
3641.13
36.41
3677.54
551.63
4229.17

the proportion of 1:2 -complete : 450 mm

Amount
3800.00
300.00
212.75
120.00

DSR-12

Page 2083 of 2298

1.87
21.12
2.89
225.75
204.75
370.50
85.80
5345.43
53.45
5398.88
809.83
6208.71

the proportion of 1:2 -complete : 500 mm

Amount
4540.00
356.00
212.75
130.00
2.02
23.04
3.15
243.81
221.13
400.14
85.80
6217.84
62.18
6280.02
942.00
7222.02

the proportion of 1:2 -complete : 100 mm

Amount
7320.00
436.00
319.13

DSR-12

Page 2084 of 2298

160.00
2.49
27.52
3.77
276.92
251.16
452.01
85.80
9334.80
93.35
9428.15
1414.22
10842.37

CC pipe .
Amount
9950.00
484.00
319.13
185.00
2.88
32.00
4.38
310.03
281.19
508.82
109.20
12186.63
121.87
12308.50
1846.28
14154.78

Amount
9600.00
688.00
319.13
210.00
3.27
36.48

DSR-12

Page 2085 of 2298

4.99
343.14
311.22
563.16
109.20
12188.59
121.89
12310.48
1846.57
14157.05

Amount
11250.00
840.00
478.69
245.00
3.82
42.24
5.78
376.25
341.25
741.00
130.00
14454.03
144.54
14598.57
2189.79
16788.36

Amount
14200.00
1024.00
638.25
275.00
4.28
47.36
6.48
409.36

DSR-12

Page 2086 of 2298

371.28
1069.51
130.00
18175.52
181.76
18357.28
2753.59
21110.87

Amount
17300.00
1132.00
638.25
305.00
4.75
52.48
7.18
442.47
401.31
1556.10
156.00
21995.54
219.96
22215.50
3332.33
25547.83

Amount
17600.00
1320.00
638.28
340.00
5.30
58.88
8.06
478.59
434.07
2141.49

DSR-12

Page 2087 of 2298

174.20
23198.87
231.99
23430.86
3514.63
26945.49

cover and frame(38kg) : With non-modular

Amount

1545.12 A

1192.81 B

722.24 C

43.27 D

1208.80 E

-101.27

600.06 F

DSR-12

Page 2088 of 2298

136.94 G

18.06
16.38
1415.00
10.07
10.07
20.14
6837.69
13.88
6851.57
210.35
7061.92

nnel CC 1:2:4 :- inside size 90x80 cm 45 cm

Amount

1545.12 A

1290.23 B

722.24 C

43.27 D

DSR-12

Page 2089 of 2298

1208.80 E

-101.27

600.06 F

136.94 G

18.06
16.38
1415.00
10.07
10.07
20.14
6935.11
13.88
6948.99
210.35
7159.34

.I. cover and frame(58kg) : With common

Amount

1976.32 A

3262.67 B

DSR-12

Page 2090 of 2298

1128.51 C

379.07 D

1703.31 E

-143.26

1409.60 F

273.87 G

24.08
21.84
4435.00
10.07
10.07
24.79
14515.94
43.83
14559.77
663.96
15223.73

nnel CC 1:2:4 :- inside size 120 x 90 x 90 cm

Amount

DSR-12

Page 2091 of 2298

1976.32 A

3529.15 B

1128.51 C

379.07 D

1703.31 E

-143.26

1409.60 F

273.87 G

24.08
21.84
4435.00
10.07
10.07
24.79
14782.42
43.83
14826.25
663.96
15490.21

DSR-12

Page 2092 of 2298

nnel CC 1:2:4 :- inside size 120 x 90 x 90 cm

Amount

1976.32 A

2806.60 B

1128.51 C

417.15 D

1813.20 E

-153.14

DSR-12

Page 2093 of 2298

1500.43 F

258.31 G

24.08
21.84
8460.00
20.14
10.07
30.22
18313.73
84.13
18397.86
1274.60
19672.46

nnel CC 1:2:4 :- inside size 120 x 90 x 90 cm

Amount

1976.32 A

3035.82 B

1128.51 C

DSR-12

Page 2094 of 2298

417.15 D

1813.20 E

-153.14

1500.43 F

258.31 G

24.08
21.84
8460.00
20.14
10.07
30.22
18542.95
84.13
18627.08
1274.60
19901.68

Amount

3473.17 A

DSR-12

Page 2095 of 2298

588.51 B
4061.68
0.00
4061.68
0.00
4061.68

Amount

3756.83 A

588.51 B
4345.34
0.00
4345.34
0.00
4345.34

Amount

4139.74 A

726.98 B
4866.72
0.00
4866.72
0.00
4866.72

DSR-12

Page 2096 of 2298

Amount

4477.84 A

726.98 B
5204.82
0.00
5204.82
0.00
5204.82

r and frame (HD20 grade) wt not less than

Amount

2449.57 A

1859.37 B

127.68 C

DSR-12

Page 2097 of 2298

541.68 D

474.51 E

302.91 F

18.06
16.38
1030.00
10.27
25.18
6855.61
11.00
6866.61
166.63
7033.24

p : 0.91 m deep with SFRC cover and frame

cks IS: 4885.

Amount

2449.57 A

DSR-12

Page 2098 of 2298

2011.23 B

124.43 C

541.68 D

474.51 E

302.91 F

18.06
16.38
1030.00
10.27
25.18
7004.22
11.00
7015.22
166.63
7181.85

DSR-12

Page 2099 of 2298

75.
Amount

2210.20 A

45.14 B

403.30 C
2658.64
0.00
2658.64
0.00
2658.64

Amount

2390.71 A

45.14 B

403.30 C
2839.15
0.00
2839.15
0.00
2839.15

p : 1.68 m deep with SFRC cover and frame

lass designation 75.

DSR-12

Page 2100 of 2298

Amount

4588.08 A

4525.64 B

127.68 C

1173.65 D

474.51 E

775.44 F

30.10
27.30
1030.00
10.27
25.18

DSR-12

Page 2101 of 2298

12787.85
11.23
12799.08
170.11
12969.19

p : 1.68 m deep with SFRC cover and frame

cks IS: 4885.

Amount

4588.08 A

4895.27 B

124.43 C

1173.65 D

DSR-12

Page 2102 of 2298

474.51 E

775.44 F

30.10
27.30
1030.00
10.27
25.18
13154.23
11.23
13165.46
170.11
13335.57

Amount

2315.45 A

443.11 B
2758.56
0.00
2758.56
0.00
2758.56

Amount

2504.55 A

DSR-12

Page 2103 of 2298

443.11 B
2947.66
0.00
2947.66
0.00
2947.66

dia. at top : 2.30 m deep with SFRC Cover

h bricks of class designation 75.

Amount

8748.45 A

12910.36 B

255.36 C

1895.89 D

DSR-12

Page 2104 of 2298

474.51 E

1317.21 F

30.10
27.30
1030.00
10.27
25.18
26724.63
11.23
26735.86
170.11
26905.97

dia. at top : 2.30 m deep with SFRC Cover

h sewer bricks IS: 4885.

Amount

8748.45 A

13964.79 B

DSR-12

Page 2105 of 2298

248.87 C

1895.89 D

474.51 E

1317.21 F

30.10
27.30
1030.00
10.27
25.18
27772.57
11.23
27783.80
170.11
27953.91

s of class designation 75.

Amount

DSR-12

Page 2106 of 2298

18453.40 A

1556.08 B
20009.48
0.00
20009.48
0.00
20009.48

r bricks IS: 4885.

Amount

19960.54 A

1556.08 B
21516.62
0.00
21516.62
0.00
21516.62

Amount

102.00
2.71
27.30
24.70

19.13 A

6.02
5.46
12.35
199.67

DSR-12

Page 2107 of 2298

1.81
201.48
27.35
228.83

Amount

72.00
2.71
27.30
24.70

19.13 A

6.02
5.46
12.35
169.67
1.51
171.18
22.81
193.99

as per IS : 10910 on 12 mm dia steel bar

Amount
110.00
2.71
43.04 A

6.02
54.60
12.35
228.72
1.86
230.58
28.13
258.71

DSR-12

Page 2108 of 2298

0 x 20 mm square bar.
Amount

102.00
2.71
27.30
24.70

19.13 A

15.05
13.65
24.70
229.24
2.10
231.34
31.83
263.17

0 mm diameter round bar.

Amount

72.00
2.71
27.30
24.70

19.13 A

15.05
13.65
24.70
199.24

DSR-12

Page 2109 of 2298

1.80
201.04
27.29
228.33

uty) the weight of the cover to be not less

Amount
980.00

10.65
29.64
1020.29
10.20
1030.49
154.57
1185.06

Amount
2210.00
20.07
29.64
2259.71
22.60
2282.31
342.35
2624.66

Amount
4500.00
24.02

DSR-12

Page 2110 of 2298

29.64
4553.66
45.54
4599.20
689.88
5289.08

450 mm internal dimensions.

Amount
690.00

180.56 A
10.07
20.14
900.77
7.20
907.97
109.11
1017.08

nternal dimensions.
Amount
600.00
10.07

135.42 A
20.14
765.63
6.30
771.93
95.48
867.41

DSR-12

Page 2111 of 2298

nternal diameter.
Amount
560.00
10.07

135.42 A
20.14
725.63
5.90
731.53
89.42
820.95

nternal dimension.
Amount
660.00
10.07

180.56 A
24.79
875.42
6.95
882.37
105.27
987.64

nternal diameter.

DSR-12

Page 2112 of 2298

Amount
630.00
10.07

135.42 A
24.79
800.28
6.65
806.93
100.73
907.66

nternal diameter.
Amount
1030.00
20.14

135.42 A
30.22
1215.78
10.80
1226.58
163.67
1390.25

internal dia.
Amount
1150.00
20.14

DSR-12

Page 2113 of 2298

135.42 A
30.22
1335.78
12.00
1347.78
181.85
1529.63

Amount
200.00
4.02
7.41
211.43
2.11
213.54
32.03
245.57

pipes 100 to 230 mm dia.

Amount

45.14 A

43.27 B

36.12

DSR-12

Page 2114 of 2298

32.76
61.75
30.02
249.06
1.61
250.67
24.34
275.01

pipes 250 to 300 mm dia.

Amount

90.28 A

55.39 B

36.12
32.76
61.75
30.80
307.10
1.61
308.71
24.46
333.17

pipes 350 to 450 mm dia.

Amount

DSR-12

Page 2115 of 2298

135.42 A

103.85 B

48.16
43.68
81.51
40.10
452.72
2.13
454.85
32.34
487.19

ine to main sewer manhole:- 100 mm dia.

Amount

550.00

2.13
166.95 A

44.00
210.00
310.00

24.56 B

DSR-12

Page 2116 of 2298

648.37 C

10.39 D

831.40 E
40.10

387.79 F
40.10

210.70
191.10
666.90
4334.49
22.65
4357.14
343.15
4700.29

ine to main sewer manhole:- 150 mm dia.

Amount

905.56
2.71
314.10 A

50.00
470.00
505.00

17.54 B

DSR-12

Page 2117 of 2298

864.49 C

10.39 D

1148.40 E
59.47

476.18 F
50.75

255.85
232.05
864.50
6226.99
33.96
6260.95
514.48
6775.43

dia. sand cast iron drop connection.

Amount
550.00
19.95

DSR-12

Page 2118 of 2298

494.00 A

370.68 B
10.65

12.04
10.92
9.88
1478.12
6.13
1484.25
92.94
1577.19

dia. sand cast iron drop connection.

Amount
905.56
19.95

617.49 A

413.45 B
12.05

15.05
13.65
12.35
2009.55
9.79
2019.34
148.26
2167.60

DSR-12

Page 2119 of 2298

x80cm and 45 cm deep.

Amount

177.86 A

192.64 B

107.37 C

215.37 D
10.65
703.89
0.11
704.00
1.61
705.61

0x90cm and 90 cm deep.

Amount

227.50 A

526.92 B

DSR-12

Page 2120 of 2298

167.76 C

303.48 D
10.65
1236.31
0.11
1236.42
1.61
1238.03

an hole 140 x 90 cm and 2.45 mtr deep.

Amount

297.81 A

1637.42 B

194.60 C

186.00 D
10.65
12.01

DSR-12

Page 2121 of 2298

2338.49
0.23
2338.72
3.43
2342.15

dia. and 1.68 M deep.

Amount

791.84 A

742.22 B

234.87 C
10.65
12.01
1791.59
0.23
1791.82
3.43
1795.25

DSR-12

Page 2122 of 2298

.
Amount

560.91 A
2.71
563.62
0.03
563.65
0.41
564.06

p.
Amount

668.56 A
2.71
671.27
0.03
671.30
0.41
671.71

d 2.45 m deep (upto 4.25 m depth).

Amount

DSR-12

Page 2123 of 2298

844.20 A

134.21 B
978.41
0.00
978.41
0.00
978.41

upto 2.29 M depth).

Amount

791.84 A

DSR-12

Page 2124 of 2298

1116.16 B

234.87 C
10.65
12.05
-1795.25 D
370.32
0.23
370.55
3.44
373.99

m with rectangular cover 600 x 450 mm of

Amount

166.42 A
10.65

934.07 B

DSR-12

Page 2125 of 2298

140.05 C
20.14
1271.33
0.31
1271.64
4.66
1276.30

m with circular cover 500 mm dia of grade

Amount

254.53 A
10.65

1428.58 B

273.87 C
24.79
1992.42
0.35
1992.77
5.37
1998.14

m with circular cover 560 mm dia of grade

Amount

DSR-12

Page 2126 of 2298

234.95 A
10.65

1318.69 B

258.31 C
30.22
1852.82
0.41
1853.23
6.19
1859.42

h circular cover 600 mm dia of grade EHD-

Amount

19.58 A
12.01

105.45 B
30.22
167.26
0.42

DSR-12

Page 2127 of 2298

167.68
6.40
174.08

nation 75 in C.M 1:5 : With F.P.S. bricks.

Amount

555.74 A

1017.39 B

186.94 C

527.24 D

151.12 E
650.00
10.65
7.94
3107.02
6.69
3113.71
101.29
3215.00

gnation 75 in C.M 1 : 5: With F.P.S bricks.

Amount

DSR-12

Page 2128 of 2298

524.87 A

1508.55 B

268.29 C

5.27 D

329.67 E

-27.91
156.83 F

281.58 G

305.00
30.80
3382.95
3.08
3386.03
46.65
3432.68

DSR-12

Page 2129 of 2298

esignation 7.5 in C.M 1 : 5: With common

Amount

895.37 A

1894.46 B

408.49 C

369.07 D

329.67 E

-27.91

289.80 F

259.48 G

DSR-12

Page 2130 of 2298

454.16 H
650.00
10.65
305.00
50.75
5888.99
9.88
5898.87
149.76
6048.63

dimensions 455x610 mm and 45 cm deep

Amount

617.49 A

736.73 B

155.78 C

579.96 D

159.68 E
1415.00
10.65
10.65
20.14
3706.08
14.56
3720.64

DSR-12

Page 2131 of 2298

220.65
3941.29

dimensions 500x700 mm and 45 cm deep

Amount

679.24 A

771.82 B

181.74 C

714.29 D

191.04 E

354.81 F
1415.00
10.65
10.65
20.14

DSR-12

Page 2132 of 2298

4349.38
14.56
4363.94
220.65
4584.59

dimensions 600x850 mm and 45 cm deep

Amount

679.24 A

771.82 B

181.74 C

714.29 D

-59.28

191.04 E

DSR-12

Page 2133 of 2298

354.81 F
1415.00
10.65
10.65
20.14
4290.10
13.97
4304.07
211.67
4515.74

Amount

2455.78 A

368.68 B
2824.46
0.00
2824.46
0.00
2824.46

F.P.S. bricks.
Amount

2666.27 A

415.42 B
3081.69
0.00
3081.69
0.00

DSR-12

Page 2134 of 2298

3081.69

F.P.S. bricks.
Amount

3087.26 A

501.96 B
3589.22
0.00
3589.22
0.00
3589.22

Amount

1926.39 A

254.85 B

420.50

890.50
1961.75
3455.00
108.00
1312.13

DSR-12

Page 2135 of 2298

33.87
167.09

105.24 C

90.83 D

194.45 E

150.50
136.50
741.00
741.00
12689.60
101.18
12790.78
1532.85
14323.63

Amount

226.25 A

562.25
164.73

123.76 B
72.00
38.50

123.50
20.12
1331.11
9.81
1340.92
148.64
1489.56

DSR-12

Page 2136 of 2298

dia.
Amount

170.00
1.55
6.50
0.10
0.64
0.09
3.60
6.02
5.46
14.82
5.20
213.98
2.14
216.12
32.42
248.54

dia.
Amount

225.00
3.10
9.50
0.15
0.90
0.12
7.20
9.03
8.19
19.76
7.80
290.75
2.91
293.66
44.05
337.71

DSR-12

Page 2137 of 2298

ngth below the pile cap M-35 in cement

Amount

13157.85 A
776.41
3680.00
1470.00
12240.00
132.00
24.08
494.00
31974.34
188.16
32162.50
2850.70
35013.20

ngth below the pile cap M-35 in cement

Amount

16670.10 A
585.12
3680.00
1470.00
16320.00
132.00
24.08
494.00
39375.30
227.05
39602.35
3439.84
43042.19

DSR-12

Page 2138 of 2298

ngth below the pile cap M-35 in cement

Amount

20575.52 A
789.70
3680.00
1470.00
20400.00
132.00
24.08
494.00
47565.30
269.90
47835.20
4088.95
51924.15

ngth below the pile cap M-35 in cement

Amount

24900.31 A
554.10
3680.00
1470.00
20400.00
132.00
24.08
494.00
51654.49
267.54
51922.03
4053.26
55975.29

ngth below the pile cap M-35 in cement

DSR-12

Page 2139 of 2298

Amount

34703.17 A
854.62
3680.00
1470.00
23800.00
132.00
42.14
864.50
65546.43
308.43
65854.86
4672.75
70527.61

ngth below the pile cap M-35 in cement

Amount

41151.03 A
1337.86
3680.00
1470.00
23120.00
132.00
48.16
988.00
71927.05
307.76
72234.81
4662.57
76897.38

ngth below the pile cap M-35 in cement

Amount

DSR-12

Page 2140 of 2298

53312.87 A
1092.72
3680.00
1470.00
22780.00
132.00
54.18
1111.50
83633.27
303.20
83936.47
4593.54
88530.01

ngth below the pile cap M-35 in cement

Amount

83350.50 A
1659.09
3680.00
1470.00
26180.00
220.00
60.20
1235.00
117854.79
345.04
118199.83
5227.40
123427.23

ength below the pile cap M-35 in cement

Amount

DSR-12

Page 2141 of 2298

7391.46 A
496.00
431.88
12240.00
132.00
1596.00
1500.00
510.00
36.12
494.00
24827.46
174.36
25001.82
2641.55
27643.37

ength below the pile cap M-35 in cement

Amount

13157.85 A
697.50
117.80
12240.00
132.00
1596.00
1500.00
510.00
36.12
494.00
30481.27
173.23
30654.50
2624.50
33279.00

ength below the pile cap M-35 in cement

Amount

DSR-12

Page 2142 of 2298

16670.10 A
775.00
343.73
15980.00
1386.00
1596.00
1500.00
510.00
36.12
617.50
39414.45
227.44
39641.89
3445.77
43087.66

ength below the pile cap M-35 in cement

Amount

20575.52 A
868.00
131.05
20400.00
132.00
1596.00
510.00
1500.00
36.12
617.50
46366.19
257.91
46624.10
3907.29
50531.39

ength below the pile cap M-35 in cement

DSR-12

Page 2143 of 2298

Amount

29618.26 A
1023.00
472.97
25500.00
132.00
1596.00
510.00
1500.00
36.12
741.00
61129.35
315.11
61444.46
4773.93
66218.39

ength below the pile cap M-35 in cement

Amount

34703.17 A
930.00
196.05
23800.00
132.00
3150.00
510.00
1500.00
42.14
864.50
65827.86
311.25
66139.11
4715.39
70854.50

DSR-12

Page 2144 of 2298

ength below the pile cap M-35 in cement

Amount

41151.03 A
1085.00
262.08
23460.00
132.00
3150.00
680.00
2000.00
48.16
988.00
72956.27
318.05
73274.32
4818.49
78092.81

ength below the pile cap M-35 in cement

Amount

53312.87 A
1193.50
433.28
22780.00
132.00
3150.00
850.00
2500.00
54.18
1111.50
85517.33
322.04
85839.37
4878.98
90718.35

DSR-12

Page 2145 of 2298

ength below the pile cap M-35 in cement

Amount

83350.50 A
1395.00
884.29
26180.00

220.00
4032.00
1275.00
3750.00
75.25
1235.00
122397.04
390.47
122787.51
5915.55
128703.06

and length below pile cap M-35in cement

Amount

4078.41 A
248.00
612.27
12240.00
66.00
84.00
24.08
494.00
17846.76
137.68
17984.44

DSR-12

Page 2146 of 2298

2085.90
20070.34

and length below pile cap M-35in cement

Amount

7747.93 A
465.00
412.46
12240.00
132.00
84.00
24.08
494.00
21599.47
138.52
21737.99
2098.51
23836.50

and length below pile cap M-35in cement

Amount

9991.58 A
589.00
290.27
12240.00
132.00
84.00

DSR-12

Page 2147 of 2298

24.08
494.00
23844.93
138.53
23983.46
2098.78
26082.24

and length below pile cap M-35in cement

Amount

12581.21 A
620.00
310.14
12240.00
132.00
84.00
24.08
494.00
26485.43
139.04
26624.47
2106.49
28730.96

cified dia. (only the qnty of extra bulbs are

Amount

172.99 A
9.30
680.00

DSR-12

Page 2148 of 2298

22.00
42.00
6.02
247.00
1179.31
10.06
1189.37
152.46
1341.83

cified dia. (only the qnty of extra bulbs are

Amount

330.26 A
18.60
680.00
22.00
42.00
6.02
247.00
1345.88
10.16
1356.04
153.87
1509.91

cified dia. (only the qnty of extra bulbs are

Amount

424.62 A
24.80
680.00
22.00
42.00

DSR-12

Page 2149 of 2298

6.02
247.00
1446.44
10.22
1456.66
154.81
1611.47

cified dia. (only the qnty of extra bulbs are

Amount

534.70 A
31.00
680.00
22.00
84.00
6.02
247.00
1604.72
10.70
1615.42
162.11
1777.53

ength below the pile cap in M-35 cement

Amount

13157.85 A
18220.24 B
-11806.81 C
121.60
658.58
3680.00
1470.00

DSR-12

Page 2150 of 2298

13300.00
555.00
36.12
741.00
40133.58
205.62
40339.20
3115.19
43454.39

ength below the pile cap in M-35 cement

Amount

16670.10 A
23083.81 B
-14958.43 C
121.60
658.58
3680.00
1470.00
13300.00
555.00
325.08
2662.66
47568.40
227.73
47796.13
3450.10
51246.23

ength below the pile cap in M-35 cement

Amount

DSR-12

Page 2151 of 2298

20575.52 A
28491.81 B
-18462.85 C
121.60
658.58
3680.00
1470.00
13300.00
555.00
36.12
741.00
51166.78
205.62
51372.40
3115.19
54487.59

ength below the pile cap in M-35 cement

Amount

24900.31 A
34480.54 B
-22343.57 C
121.60
658.58
3680.00
1470.00
13300.00
555.00
36.12
741.00
57599.58
205.62
57805.20

DSR-12

Page 2152 of 2298

3115.19
60920.39

ength below the pile cap in M-35 cement

Amount

57034.81 A
78978.57 B
-51178.54 C
121.60
658.58
3680.00
1470.00
13300.00
555.00
36.12
741.00
105397.14
205.62
105602.76
3115.19
108717.95

ength below the pile cap in M-35 cement

Amount

82302.07 A
113967.24 B
-73851.39 C
121.60

DSR-12

Page 2153 of 2298

658.58
3680.00
1470.00
13300.00
555.00
36.12
741.00
142980.22
205.62
143185.84
3115.19
146301.03

t for initial test: Upto 50 ton capacity pile.

Amount
33200.00
33200.00
332.00
33532.00
5029.80
38561.80

est for initial test: Above 50 and upto 100

Amount
15000.00
15000.00
150.00
15150.00
2272.50
17422.50

st for routine test: Upto 50 tonne capacity

Amount
40300.00

DSR-12

Page 2154 of 2298

40300.00
403.00
40703.00
6105.45
46808.45

st for routine test: Above 50 and upto 100

Amount
23000.00

23000.00
230.00
23230.00
3484.50
26714.50

piles. Upto 50 tonne capacity rate per test

Amount
48500.00
48500.00
485.00
48985.00
7347.75
56332.75

piles. Upto 50 tonne capacity rate for test

Amount
29500.00
29500.00
295.00
29795.00
4469.25
34264.25

DSR-12

Page 2155 of 2298

Amount
15000.00
15000.00
150.00
15150.00
2272.50
17422.50

Amount
23000.00

23000.00
230.00
23230.00
3484.50
26714.50

Amount
29500.00
29500.00
295.00
29795.00
4469.25
34264.25

DSR-12

Page 2156 of 2298

Amount
15000.00
15000.00
150.00
15150.00
2272.50
17422.50

Amount
23500.00
23500.00
235.00
23735.00
3560.25
27295.25

accordance with IS 14893 ....

Amount

300.00
70.00
30.00
150.00
50.00
600.00
6.00
606.00
90.90
696.90

Amount

DSR-12

Page 2157 of 2298

9244.40
72.00
1680.80
77.48

602.00
260.00
247.00
13.00
149.00
12345.68
123.46
12469.14
1870.37
14339.51

al drawings and the directions of Engineer-

Amount

DSR-12

Page 2158 of 2298

9244.40
72.00

2689.28
77.48

602.00
260.00
247.00
13.00
149.00
13354.16
133.54
13487.70
2023.16
15510.86

: Polyester Powder coated aluminium

Amount

9244.40

DSR-12

Page 2159 of 2298

72.00
2941.40
77.48

602.00
260.00
247.00
13.00
149.00
13606.28
136.06
13742.34
2061.35
15803.69

Amount

4763.00
200.00

92.00
866.00
46.49
58.75

DSR-12

Page 2160 of 2298

301.00
260.00
123.50
104.00
60.20
123.50
74.50
7072.94
70.73
7143.67
1071.55
8215.22

rawings - : For shutters of doors, windows

Amount

4763.00
200.00

92.00
1385.60

DSR-12

Page 2161 of 2298

46.49
58.75

301.00
260.00
123.50
104.00

60.20
123.50
74.50
7592.54
75.93
7668.47
1150.27
8818.74

er coated aluminium
Amount

4763.00
200.00

92.00

DSR-12

Page 2162 of 2298

1515.50
46.49
58.75

301.00
260.00
123.50
104.00
60.20
123.50
74.50
7722.44
77.22
7799.66
1169.95
8969.61

orative lamination one side and balancing

Amount

5071.50
20.34
40.68
245.70
247.00
5625.22
56.25
5681.47
852.22
6533.69

es.
Amount

5292.00
20.34
40.68

DSR-12

Page 2163 of 2298

245.70
247.00
5845.72
58.46
5904.18
885.63
6789.81

s panes of 4.0mm thickness

Amount

341.00
3.61
150.00
62.79
56.81
10.27
624.48
6.24
630.72
94.61
725.33

s panes of 5.5mm thickness

Amount

495.00
4.96
150.00
62.79
56.81
10.27
779.83
7.80
787.63

DSR-12

Page 2164 of 2298

118.14
905.77

Amount

341.00
4.96
150.00
62.79
56.81
10.27
625.83
6.26
632.09
94.81
726.90

Amount
1525.00
19.37
38.74
9.03 A

24.08
21.84
2.73
41.99
1682.78
16.74
1699.52
253.57
1953.09

DSR-12

Page 2165 of 2298

Amount
1675.00
19.37
38.74
9.03 A

24.08
21.84
2.73
41.99
1832.78
18.24
1851.02
276.30
2127.32

Amount

1467.84
1.16
240.00

DSR-12

Page 2166 of 2298

426.88
19.37
19.37

192.64
158.08
19.37
2544.71
25.45
2570.16
385.52
2955.68

Amount

644.00

66.50
1104.00
7.75
105.35
66.69
1994.29
19.94
2014.23
302.13
2316.36

eiling:- Anodised aluminium sheet 2.5 mm

Amount

DSR-12

Page 2167 of 2298

1543.50
294.00
8.40
3.00
600.00
9.69
107.02
96.82
31.96
2694.39
26.94
2721.33
408.20
3129.53

ling:- Powder coated aluminium sheet 2.5

Amount

1543.50
470.40
8.40
3.00
600.00
9.69
107.02
96.82
31.96
2870.79
28.71
2899.50
434.93
3334.43

DSR-12

Page 2168 of 2298

ather silocon sealent: Upto 5 mm depth, 5

Amount
26.71
3.10
3.87
30.99
64.67
0.65
65.32
9.80
75.12

Amount
2054.50
-1643.60
410.90
4.11
415.01
62.25
477.26

s and ventilators.
Amount
1082.50
-866.00
216.50
2.17
218.67
32.80
251.47

ition etc with 6mm thick clear float glass

alant etc.

Amount

DSR-12

Page 2169 of 2298

2519.00
9.92
150.00
62.79
113.62
10.27
2865.60
28.66
2894.26
434.14
3328.40

Amount
1680.00
11.60
4.07
38.22
34.58
1768.47
17.68
1786.15
267.92
2054.07

Amount
1890.00
11.60
4.07
38.22
34.58
1978.47
19.78
1998.25
299.74
2297.99

DSR-12

Page 2170 of 2298

Amount
2360.00
11.60
4.07
38.22
34.58
2448.47
24.48
2472.95
370.94
2843.89

Amount
4370.00
11.60
4.07
38.22
34.58
4458.47
44.58
4503.05
675.46
5178.51

Amount
7930.00
11.60
4.07
38.22
34.58

DSR-12

Page 2171 of 2298

8018.47
80.18
8098.65
1214.80
9313.45

Aluminium tubular
Amount

3594.80
653.60
6.59
2.32
37.63
4294.94
42.95
4337.89
650.68
4988.57

oated Aluminium tubular

Amount

3594.80
1045.76
6.59
2.32
37.63
4687.10
46.87
4733.97
710.10
5444.07

DSR-12

Page 2172 of 2298

Powder coated Aluminium tubular

Amount

3594.80
1143.80
6.59
2.32
37.63
4785.14
47.85
4832.99
724.95
5557.94

Amount
250.00

51.17
5.42
306.59
3.07
309.66
46.45
356.11

Amount

DSR-12

Page 2173 of 2298

942.92
8.00
171.44
7.75

12.04
10.40
4.94
2.60
7.75
1167.84
11.68
1179.52
176.93
1356.45

m.
Amount
400.00
12.80
18.06
4.07
434.93
4.35
439.28
65.89
505.17

minium.
Amount
410.00
12.80
18.06
4.07

DSR-12

Page 2174 of 2298

444.93
4.45
449.38
67.41
516.79

ated Aluminium
Amount
420.00
12.80
18.06
4.07
454.93
4.55
459.48
68.92
528.40

Amount
490.00
12.80
18.06
4.07
524.93
5.25
530.18
79.53
609.71

Amount
540.00
12.80
18.06

DSR-12

Page 2175 of 2298

4.07
574.93
5.75
580.68
87.10
667.78

Amount
590.00
12.80
18.06
4.07
624.93
6.25
631.18
94.68
725.86

shade according to IS: 1868 with minimum

Amount

3000.00
16.39

150.50
65.00
61.75
13.00
37.25
3343.89
33.44
3377.33
506.60
3883.93

DSR-12

Page 2176 of 2298

g top & bottom pivot & spring type fixing

Amount

4158.00
12.20
7.94
3906.18 A

245.70
222.30
1.68
8554.00
46.48
8600.48
704.15
9304.63

epth below ground level for under ground

Amount

1036.38
1925.00

49.84

1160.75

360.00
5.61

DSR-12

Page 2177 of 2298

171.50
84.00
7.01
327.60
247.00
247.00
294.84
266.76
117.00
9.30
6309.59
63.10
6372.69
955.90
7328.59

pecified stone slab 20 to 25 mm thick with

Amount

1925.00
49.84

1550.00
24.14
2337.90 A

222.50

819.00
741.00
247.00
27.12
7943.50
56.06
7999.56

DSR-12

Page 2178 of 2298

849.25
8848.81

hen ...
Amount
220.00
3.43

928.60
269.78
251.94
286.00
18.79
629.00
1.49
310.00
19.37

90.00
54.60
328.51
18.06
10.85
3440.42
34.40
3474.82
521.22
3996.04

pansion joints: Serrated with central bulb

Amount
39000.00
494.00
38.74
39532.74
395.33
39928.07

DSR-12

Page 2179 of 2298

5989.21
45917.28

ansion joints: Dumb bell with central bulb

Amount
35100.00
494.00
38.74
35632.74
356.33
35989.07
5398.36
41387.43

ansion joints: Kickers (320 mm wide, 5 mm

Amount
36000.00
494.00
38.74
36532.74
365.33
36898.07
5534.71
42432.78

cement slurry mixed with water proofing

Amount

60.00
0.93

DSR-12

Page 2180 of 2298

635.00
574.00
494.00
65.00
23.24
1852.17
18.52
1870.69
280.60
2151.29

r proofing cement compound Consisting of

Amount

100.00
1.56

1230.63

429.00
574.00
247.00
65.00
34.87
2682.06
26.82
2708.88
406.33
3115.21

m and minimum thickness at khurra as 65

DSR-12

Page 2181 of 2298

Amount
137.50
701.11

446.50
89.51
1564.98
432.25
72.80
15.05
13.65
10.40
61.75
20.34
137.50
49.40
1866.80 A

125.00

682.50

98.28
88.92
20.34
147.42
133.38
117.00
7032.38
51.66
7084.04
782.59
7866.63

Amount
3219.00

1650.00
162.00

DSR-12

Page 2182 of 2298

15.77
14.19
69.60
1.74
200.48

589.68
800.28
54.18
10.07
6786.99
67.87
6854.86
1028.23
7883.09

I.
Amount
4551.00

3300.00

23.91
162.00
15.77
98.40
2.46
200.48

884.52
1200.42
60.20
10.07
10509.23
105.09
10614.32
1592.15
12206.47

DSR-12

Page 2183 of 2298

en felt).
Amount
4828.50

3630.00

24.09
162.00
15.77
104.40
2.61
200.48

1179.36
1600.56
108.36
10.07
11866.20
118.66
11984.86
1797.73
13782.59

tumen felt).
Amount
4828.50
3630.00

29.26
162.00
15.77
104.40
2.61
200.48

1179.36
1600.56
108.36
10.07

DSR-12

Page 2184 of 2298

11871.37
118.71
11990.08
1798.51
13788.59

Amount
96.00
2.13
46.41
41.99
20.14
206.67
2.07
208.74
31.31
240.05

m.
Amount
54.00
5.26
32.15
10.07
101.48
1.01
102.49
15.37
117.86

m.
Amount
72.00
7.01
40.10
10.07
129.18

DSR-12

Page 2185 of 2298

1.29
130.47
19.57
150.04

Amount
703.50
231.00
77.96
504.00
39.42
1600.00
24.92
402.61
182.00
30.10
21.31
56.00
21.00
68.18
3962.00
39.62
4001.62
600.24
4601.86

Amount
4145.53
287.00
494.00
130.00
1235.00
17.43
6308.96
63.09
6372.05
955.81
7327.86

DSR-12

Page 2186 of 2298

Amount
3485.41
287.00
494.00
130.00
1235.00
16.08
5647.49
56.47
5703.96
855.59
6559.55

dified memberane manufactured by Bengal

Amount

3894.00
480.00
3996.00
10.51
11.62
69.60
1.74
200.48

589.68
800.28
54.18
10.07
10118.16
101.18
10219.34
1532.90
11752.24

DSR-12

Page 2187 of 2298

ied polyme- ric memberane manufactured

m thick.

Amount

3267.00
480.00
2664.00
7.36
11.62
69.60
1.74
200.48

431.34
585.39
39.13
10.07
7767.73
77.68
7845.41
1176.81
9022.22

ater proofing memberane,with glass fibre

erse 350/300 tear strength 60/80N. 2 mm

Amount

5511.00
852.00
1.05
11.62
357.00
73.80
650.16
54.18
800.28
34.87
8345.96
83.46
8429.42
1264.41

DSR-12

Page 2188 of 2298

9693.83

erane,with glass fibre matt manufactured

rength 60/80N. 3 mm thick.

Amount

6831.00
852.00
1.05
11.62
357.00
73.80
650.16
54.18
800.28
34.87
9665.96
96.66
9762.62
1464.39
11227.01

ater proofing memberane,with glass fibre

Amount

8085.00
852.00
1.05
11.62
357.00
73.80
650.16
54.18
800.28
34.87
10919.96

DSR-12

Page 2189 of 2298

109.20
11029.16
1654.37
12683.53

ster of thickness 1.0 to 1.25 mm by Bhutan

Amount

1008.00
11.62
129.43
12.04
160.55
69.73
1391.37
13.91
1405.28
210.79
1616.07

Amount
175.37
4.07
86.45
265.89
2.66
268.55
40.28
308.83

Amount

43.72

DSR-12

Page 2190 of 2298

41.25
30.00
109.50
224.47
2.24
226.71
34.01
260.72

Amount
95.22
90.00
185.22
1.85
187.07
28.06
215.13

Amount
95.22
19.76
4.07
119.05
1.19
120.24
18.04
138.28

Amount
95.22
32.11
4.07
131.40
1.31
132.71
19.91

DSR-12

Page 2191 of 2298

152.62

Amount
95.22
41.99
4.07
141.28
1.41
142.69
21.40
164.09

Amount
49.40
2.13
51.53
0.52
52.05
7.81
59.86

Amount
81.51
81.51
4.07
167.09
1.67
168.76
25.31
194.07

DSR-12

Page 2192 of 2298

Amount
123.50
2.13
125.63
1.26
126.89
19.03
145.92

Amount

17.29
0.77
18.06
0.18
18.24
2.74
20.98

Amount
61.75
61.75
123.50
1.24
124.74
18.71
143.45

wa 15 cm apart.
Amount
197.60
395.20
10.07
602.87
6.03
608.90

DSR-12

Page 2193 of 2298

91.34
700.24

ws 7.5 cm apart.
Amount

197.60
247.00
10.07
454.67
4.55
459.22
68.88
528.10

udge or manure.
Amount

666.90
494.00
4.07
1164.97
11.65
1176.62
176.49
1353.11

all weeds and other growth with roots by

Amount
370.50
185.25

247.00
123.50

526.11

DSR-12

Page 2194 of 2298

261.82

81.51
81.51
4.07
49.40
2.13
123.50
2.13
10.07
2068.50
20.69
2089.19
313.38
2402.57

nching refilling the excavated earth after

Amount
444.60
308.75
753.35
7.53
760.88
114.13
875.01

1.2 m & 1.2 m deep.

Amount

177.86 A
7.75
185.61
0.08
185.69
1.17
186.86

DSR-12

Page 2195 of 2298

90 cm dia & 90 cm deep.

Amount

74.54 A
4.84
79.38
0.05
79.43
0.73
80.16

60 cm dia & 60 cm deep.

Amount

22.23 A
2.13
24.36
0.02
24.38
0.32
24.70

45 cm dia & 45 cm deep.

Amount

9.15 A
1.31
10.46
0.01
10.47
0.20

DSR-12

Page 2196 of 2298

10.67

t 1.2 m above GL. With F.P.S. bricks.

Amount

563.50
53.73
23.63
68.25
61.75
6.20
777.06
7.77
784.83
117.72
902.55

.S. flats rivetted to flat iron rings.

Amount

1218.00
60.05
12.01
2.26
546.00
247.00

DSR-12

Page 2197 of 2298

20.18 A
95.35 B
2200.85
20.85
2221.70
315.93
2537.63

pplied free by the Deptt : A coat of coal tar.

Amount
19.95
40.10
4.07
35.49
17.29
2.13

53.03 A
172.06
1.19
173.25
18.03
191.28

supplied free by the Deptt : Two or more

Amount

191.28 A

44.76 B

116.36 C
-53.03 D
299.37
0.00

DSR-12

Page 2198 of 2298

299.37
0.00
299.37

supplied free by the Deptt : A coat of coal

Amount
20.14
100.14
4.07
51.87
24.70
2.13

54.60

81.75 A
339.40
2.58
341.98
39.03
381.01

pplied free by the Deptt :

Amount
381.01 A

69.00 B

179.39 C

-81.75 D
547.65
0.00
547.65

DSR-12

Page 2199 of 2298

0.00
547.65

class designation 7.5

Amount
145.00
11.68
13.65
12.35
20.14
202.82
2.03
204.85
30.73
235.58

Amount
41.99
19.76
61.75
0.62
62.37
9.36
71.73

Amount
86.45
86.45
172.90
1.73
174.63
26.19
200.82

DSR-12

Page 2200 of 2298

Amount
106.21
86.45
192.66
1.93
194.59
29.19
223.78

Amount
130.91
106.21
237.12
2.37
239.49
35.92
275.41

Amount
41.99
53.46
95.45
0.95
96.40
14.46
110.86

d carriage upto 1 km (Cow dung manure

Amount
47.00
95.22
142.22

DSR-12

Page 2201 of 2298

1.42
143.64
21.55
165.19

round level and 0.40 metre below ground

Amount

1436.83 A
1.68

82.42 B

17.29
1538.22
0.19
1538.41
2.87
1541.28

DSR-12

Page 2202 of 2298

round level and 0.50 metre below ground

Amount

2306.91 A

95.35 B

17.29
2419.55
0.17
2419.72
2.62
2422.34

h in layers not exceeding 20 cm in depth,

Amount
543.40
889.20
104.00

DSR-12

Page 2203 of 2298

2.03
1538.63
15.39
1554.02
233.10
1787.12

nominal mix 1:2:4 - Top inside dia 35 cm,

Amount

26.68 A

47.04 B
11.79 C
63.41 D
148.92
0.00
148.92
0.00
148.92

nominal mix 1:2:4 - Top inside dia 30 cm,

Amount

DSR-12

Page 2204 of 2298

22.71 A

32.93 B
8.31 C
45.06 D
109.01
0.00
109.01
0.00
109.01

ominal mix 1:2:4 .. Top inner width 35 cm,

Amount

26.68 A

57.86 B

DSR-12

Page 2205 of 2298

15.03 C
80.10 D
179.67
0.00
179.67
0.00
179.67

escribed in IS: 2800 (part I) .. .. All types of

Amount
7500.00
685.76

988.00
301.00
600.00
494.00
247.00
10815.76
108.16
10923.92
1638.59
12562.51

escribed in IS: 2800 (part I) .. .. All types of

Amount
7500.00
685.76

988.00
301.00
600.00
494.00
247.00
10815.76

DSR-12

Page 2206 of 2298

108.16
10923.92
1638.59
12562.51

escribed in IS: 2800 (part I) .. .. All types of

Amount
7500.00
685.76

988.00
301.00
600.00
494.00
247.00
10815.76
108.16
10923.92
1638.59
12562.51

scribed in IS: 2800 (part I) .. .. Rocky strata

Amount
6750.00
247.74
685.76

988.00
301.00
600.00
185.25
741.00
204.75
247.00
10950.50

DSR-12

Page 2207 of 2298

109.51
11060.01
1659.00
12719.01

scribed in IS: 2800 (part I) .. .. Rocky strata

Amount
6750.00
330.32
685.76

988.00
301.00
600.00
247.00
988.00
204.75
247.00
11341.83
113.42
11455.25
1718.29
13173.54

scribed in IS: 2800 (part I) .. .. Rocky strata

Amount
6750.00
660.64
685.76

988.00
301.00
600.00
296.40

DSR-12

Page 2208 of 2298

1976.00
204.75
247.00
12709.55
127.10
12836.65
1925.50
14762.15

scribed in IS: 2800 (part I) ..All types of soil

Amount
7500.00
685.76

988.00
301.00
600.00
494.00
247.00
10815.76
108.16
10923.92
1638.59
12562.51

cribed in IS: 2800 (part I) ..All types of soil -

Amount
7500.00
685.76

988.00
301.00
600.00
494.00
247.00
10815.76

DSR-12

Page 2209 of 2298

108.16
10923.92
1638.59
12562.51

cribed in IS: 2800 (part I) ..All types of soil -

Amount
7500.00
685.76

988.00
301.00
600.00
494.00
247.00
10815.76
108.16
10923.92
1638.59
12562.51

scribed in IS: 2800 (part I), .. .. Rocky strata

Amount
6750.00
412.90
685.76

988.00
301.00
600.00
247.00
1235.00
191.10
247.00
11657.76

DSR-12

Page 2210 of 2298

116.58
11774.34
1766.15
13540.49

scribed in IS: 2800 (part I), .. .. Rocky strata

Amount
6750.00
495.48
685.76

988.00
301.00
600.00
247.00
1482.00
204.75
247.00
12000.99
120.01
12121.00
1818.15
13939.15

scribed in IS: 2800 (part I), .. .. Rocky strata

Amount
7125.00
660.64
685.76

988.00
301.00
600.00
296.40

DSR-12

Page 2211 of 2298

1976.00
273.00
247.00
13152.80
131.53
13284.33
1992.65
15276.98

PVC medium well casing (CM) pipe .. - 100

Amount
38500.00
159.56

123.50
123.50
38906.56
389.07
39295.63
5894.34
45189.97

PVC medium well casing (CM) pipe .. - 150

Amount
46000.00
159.56

123.50
123.50
15.00
46421.56
464.22
46885.78
7032.87
53918.65

DSR-12

Page 2212 of 2298

PVC medium well casing (CM) pipe .. - 200

Amount
83475.00
259.56

123.50
123.50
83981.56
839.82
84821.38
12723.21
97544.59

PVC medium well screen (RMS) pipes .. ..

Amount
39000.00
159.56

123.50
123.50
15.00
39421.56
394.22
39815.78
5972.37
45788.15

PVC medium well screen (RMS) pipes .. ..

Amount
46515.00
159.56

DSR-12

Page 2213 of 2298

123.50
123.50
15.00
46936.56
469.37
47405.93
7110.89
54516.82

PVC medium well screen (RMS) pipes .. ..

Amount
84000.00
259.56

123.50
123.50
20.00
84526.56
845.27
85371.83
12805.77
98177.60

arge pit, in the required thickness ..

Amount
332.00
61.75
1.49
395.24
3.95
399.19
59.88
459.07

DSR-12

Page 2214 of 2298

ge pit, over the existing layer of boulders ..

Amount
650.00
61.75
1.49
713.24
7.13
720.37
108.06
828.43

rge pit..
Amount
625.00
61.75
1.49
688.24
6.88
695.12
104.27
799.39

ravel fine/ medium/ coarse ..

Amount
650.00
74.10
1.49
725.59
7.26
732.85
109.93
842.78

f strength not less than M-25, of size 1000

DSR-12

Page 2215 of 2298

Amount

750.00
22.35
772.35
7.72
780.07
117.01
897.08

tric Resistance Welded) FE 410 mild steel

um wall thickness 5.00 mm

Amount
22500.00
825.00
57.44

461.64 A

333.45
150.50
24328.03
238.66
24566.69
3615.76
28182.45

tric Resistance Welded) FE 410 mild steel

um wall thickness 5.00 mm

Amount
31260.00
1000.00
95.74

671.52 A

DSR-12

Page 2216 of 2298

345.80
150.50
33523.56
328.52
33852.08
4977.08
38829.16

tric Resistance Welded) FE 410 mild steel

um wall thickness 5.40 mm

Amount
37500.00
1250.00
155.73

902.34 A

333.45
150.50
40292.02
393.90
40685.92
5967.54
46653.46

d) FE 410 plain slotted mild steel threaded

Amount
22500.00
825.00
1350.00
57.44

461.64 A

333.45

DSR-12

Page 2217 of 2298

150.50
25678.03
252.16
25930.19
3820.28
29750.47

d) FE 410 plain slotted mild steel threaded

Amount
31260.00
1000.00
1799.99
95.74

671.52 A

345.80
150.50
35323.55
346.52
35670.07
5249.78
40919.85

d) FE 410 plain slotted mild steel threaded

Amount
37500.00
1799.99
1250.00
155.73

902.34 A

345.80

DSR-12

Page 2218 of 2298

150.50
42104.36
412.02
42516.38
6242.11
48758.49

blish maximum rate of usable water yield

Amount
1800.00
1981.92
3781.92
37.82
3819.74
572.96
4392.70

of bore well housing/ casing pipe..100 mm

Amount

120.00
6.00
126.00
1.26
127.26
19.09
146.35

of bore well housing/ casing pipe..150 mm

Amount

150.00
7.50
157.50
1.58

DSR-12

Page 2219 of 2298

159.08
23.86
182.94

of bore well housing/ casing pipe..200 mm

Amount

180.00
9.00
189.00
1.89
190.89
28.63
219.52

ubewell as per IS: 2800 (part I) - 100 mm

Amount

934.44 A
37.25
971.69
0.37
972.06
5.64
977.70

ubewell as per IS: 2800 (part I) - 150 mm

Amount

981.16 A
44.70
1025.86

DSR-12

Page 2220 of 2298

0.45
1026.31
6.77
1033.08

ubewell as per IS: 2800 (part I) - 200 mm

Amount

1121.33 A
44.70
1166.03
0.45
1166.48
6.77
1173.25

mbly of tubewell as per IS:2800 (part I) -

Amount
140.00
7.45
147.45
1.47
148.92
22.34
171.26

mbly of tubewell as per IS:2800 (part I) -

Amount
170.00
7.45
177.45
1.77
179.22
26.88

DSR-12

Page 2221 of 2298

206.10

mbly of tubewell as per IS:2800 (part I) -

Amount
200.00
7.45
207.45
2.07
209.52
31.43
240.95

re and precaution, by mechanical / manual

Amount
130.91
19.76
18.20
2.13
171.00
1.71
172.71
25.91
198.62

building/structure, upto 25 metre height,

Amount

54.00

3840.96

DSR-12

Page 2222 of 2298

118.35

43.20

140.25

1528.00

2094.00

471.42

4665.50
7657.00

DSR-12

Page 2223 of 2298

1542.15
22154.83
221.55
22376.38
3356.46
25732.84

e, fungus, monkey beats, vegetable growth

Amount
16.40

27.34

54.60
49.40
26.00

1.49
14.15
109.20
197.60
26.00
522.18
5.22
527.40
79.11
606.51

ntachlorophenate, of reputed brand and

Amount
63.00
68.25
61.75
32.50
225.50
2.26
227.76
34.16
261.92

DSR-12

Page 2224 of 2298

dust mortar in the ratio of 1:1.5:1/2 {One

Amount
46.10
264.04
338.39
241.80
6.00
896.33
8.96
905.29
135.79
1041.08

e dust mortar in the ratio of 1:1.5:1/2 {One

Amount
46.10

264.04
338.39
241.80
6.00
896.33
8.96
905.29
135.79
1041.08

y of India/ Engineer-in-charge ..

Amount
1017.17

DSR-12

Page 2225 of 2298

40.95
37.05
8.94
1104.11
11.04
1115.15
167.27
1282.42

mical as approved by Archaeological Survey

Amount
1586.25
810.00
273.00
247.00
8.94
2925.19
29.25
2954.44
443.17
3397.61

DSR-12

Page 2226 of 2298

BASIC RATES (AS PER DSR-2012)

Sl.No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46

DSR-12

Rate Code
Description of Rate
MATERIALS :
0001
Hire charges of Coaltar Boiler 900 to 1400 litres
0002
Hire charges of Concrete Mixer 0.14 cubic metre
0004
Production cost of concrete by batch mix plant.
0005
Hire charges of Diesel Truck - 9 tonne
0006
Hire charges of Spraying machine including electric charges
0007
Hire charges of Coaltar Sprayer
Pumping charges of concrete including Hire charges of pump, piping
0009
work & accessories etc.
0010
Hire charges of Derrick monkey rope
0011
Hire charges of Pump set of capacity 4000 litres/hour.
0012
Vibrator (Needle type 40mm)
0013
Machine for rubbing of floors
0014
Front end loader
0016
Mastic Cooker
0017
Hire and running charges of tipper
0018
Hire and running charges of loader.
0019
Hand Grinder For mirror polish
0020
Hydraulic Excavator (3D) with driver and fuel.
0021
Pin vibrator
0022
Surface Vibrator
0023
Hire charges of Bitumen Concrete Mixer
Hire and running charges of hydraulic piling rig with power unit etc.
0024
including complete a
0025
Hire and running charges of light crane.
0026
Hire and running charges of bentonite pump.
Hire and running charges of vibrating pile driving hammer complete
0027
with power unit and acc
0028
Hire and running charges of crane 20 tonne capacity.
0029
Carriage of concrete by transit mixer.
0033
Paint applicator.
0037
Mobile crane.
0038
Tractor with ripper attachment.
0039
Tractor with trolley.
Air compressor 250 cfm with two leads for pneumatic cutters/
0040
hammers
0041
Joint cutting machine with 2-3 blades
0050
Issue Rate of Cement
0052
Front end loader 1 cum bucket capacity (incl POL)
0053
Tipper -5 Cum
0054
Vibratory roller 8 to 10 tonne
0055
Smooth Wheeled Roller 8 to 10 tonne
0056
Tandem Road Roller
0057
Water Tanker 5 to 6 KL capacity
0058
Air compressor
0059
Wet Mix Plant 60 TPH
0061
Emulsion Pressure Distributor @ 1750 sqm per hour
0062
Hot mix Plant -120 TPH capacity
0063
Hot mix Plant 100 TPH Capacity
0064
Paver finisher Hydrostatic with sensor control 100 TPH
0065
Paver finisher Mechanical 100 TPH

Unit
Day
Day
cum
Day
Day
Day
cum
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
per day
per day
per day
per day
per day
km/ cum
per day
per day
per day
per day
day
per day
One hour
hour
tonne km
hour
hour
hour
One hour
One hour
One hour
One hour
Hours
hour
Hours
One hour

Local Market Rates : 2227 of 2298

DSR-12

47
48
49
50

0066
0069
0070
0075

51
52
53
54
55

0076
0081
0222
0223
0224

56
57

0225
0226

58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87

0227
0228
0229
0230
0231
0232
0233
0234
0235
0236
0237
0285
0286
0287
0291
0292
0293
0294
0295
0296
0297
0298
0302
0303
0304
0305
0308
0309
0310
0312

88
89
90
91
92
93
94
95
96
97

0313
0314
0316
0317
0318
0322
0324
0325
0326
0328

Batching and Mixing Plant @ 75 cum per hour

Generator 250 kVA
Generator 100 KVA/125 KVA
Road sweeper (Mechamical Broom) @ 1250 sqm per hour
Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour actual
output
Pile Integrity testing equipment
Seam bolts and nuts 6 mm dia and 25 mm long
Non - Asbestos fibre cement corrugated sheet 6mm thick.
Non - Asbestos fibre cement close fitting adjustable ridge.
Non - Asbestos fibre cement corrugate serrated adjustable ridge.

One hour
Hours
One hour
One hour
One hour

Non - Asbestos fibre cement plain wing adjustable ridge.

Non - Asbestos fibre cement unserrated adjustable ridge for hips.

metre
metre

Non - Asbestos fibre cement corrugated apron piece.

Non - Asbestos fibre cement eaves filler piece.
Non - Asbestos fibre cement north light curves.
Non - Asbestos fibre cement ventilator curves.
Non - Asbestos fibre cement barge boards 6 mm thick.
Non - Asbestos fibre cement ridge finial .
Non - Asbestos fibre cement special north light curves.
Non - Asbestos fibre cement S type louvers.
Non - Asbestos multi purpose fibre cement board 6mm thick.
Non - Asbestos multi purpose fibre cement board 8mm thick.
Brick Aggregate (Single size) : 63 mm nominal size
Brick Aggregate (Single size) : 50 mm nominal size
Brick Aggregate (Single size) : 40 mm nominal size
Stone Aggregate (Single size) : 63 mm nominal size
Stone Aggregate (Single size) : 50 mm nominal size
Stone Aggregate (Single size) : 40 mm nominal size
Stone Aggregate (Single size) : 25 mm nominal size
Stone Aggregate (Single size) : 20 mm nominal size
Stone Aggregate (Single size) : 12.5 mm nominal size
Stone Aggregate (Single size) : 10 mm nominal size
Stone Aggregate (Single size) : 06 mm nominal size
Safeda ballies 125 mm diameter
Cow Dung
Bajri
Bamboo 25 mm dia 2.5 metre long
Bhusa
Paving bitumen S-90 of approved quality
Bitumen emulsion
Bitumen grade PMB - 40
Blown type petroleum bitumen of penetration 85/25 of approved
quality
Bitumen hot sealing compound : grade A
Bitumen solution primer of approved quality
Premoulded joint filler 12 mm thick
Bitumen felt fibre base (vegetable or animal):Type 2 grade 1
Bitumen felt :Type 3 grade 1
Coal Tar
Blasting powder
Blasting fuse (fuse wire)
White face insulating board:12 mm thick

metre
each
metre
each
metre
pair
each
each
sqm
sqm
cum
cum
cum
cum
cum
cum
cum
cum
cum
cum
cum
metre
One Cum
cum
score
quintal
tonne
tonne
M.T.
tonne

per day
10 Nos
sqm
metre
metre

kilogram
litre
sqm
sqm
sqm
litre
kilogram
each
sqm

Local Market Rates : 2228 of 2298

DSR-12

98
99

0332
0336

100

0339

101

0341

102

0346

103

0347

104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140

0348
0362
0364
0365
0367
0368
0370
0373
0378
0379
0380
0381
0382
0383
0384
0385
0386
0387
0388
0389
0390
0391
0392
0393
0394
0400
0401
0402
0403
0404
0405
0406
0408
0409
0410
0411
0412

141

0413

142
143
144
145

0414
0417
0418
0419

Natural colour insulating board:12 mm thick

sqm
Flame retardant face insulating board: 12 mm thick
sqm
Flame retardant face insulating, Impregnated fibre board 12 mm thick sqm
Flat pressed 3 layer particle board (medium density) Grade I :12 mm
thick
Extra for veneered particle board with : Teak veneering on one side
and commercial veneere
Extra for veneered particle board with : Commercial veneering on both
side
Extra for veneered particle board with : Teak veneering on both sides

sqm

Brick bats
Wire brush
Soft brush
Portland Cement
White Cement
Coal (steam)
Cramp Gun metal 25x6x300 mm
Brass butt hinges (light/ordinary type) : 125x70x4 mm
Brass butt hinges (light/ordinary type) : 100x70x4 mm
Brass butt hinges (light/ordinary type) : 75x40x2.5 mm
Brass butt hinges (light/ordinary type) : 50x40x2.5 mm
Brass butt hinges (heavy type) : 125x85x5.5 mm(.70)kg
Brass butt hinges (heavy type) : 100x85x5.5 mm(.56)kg
Brass butt hinges (heavy type) :75x65x4.0 mm(.20)kg
Brass parliamentary hinges 150x125x27x5 mm
Brass parliamentary hinges 125x125x27x5 mm
Brass parliamentary hinges 100x125x27x5 mm
Brass parliamentary hinges75x100x20x3.2 mm
Brass single acting spring hinges 150 mm
Brass single acting spring hinges 125 mm
Brass single acting spring hinges 100 mm
Brass double acting spring hinges 150 mm
Brass double acting spring hinges 125 mm
Brass double acting spring hinges 100 mm
Brass tower bolt (barrel type) 250x10 mm
Brass tower bolt (barrel type) 200x10 mm
Brass tower bolt (barrel type) 150x10 mm
Brass tower bolt (barrel type) 100x10 mm
Brass flush bolt 250 mm
Brass flush bolt 150 mm
Brass flush bolt 100 mm
Brass handles 125 mm with plate 175x32 mm
Brass handles 100 mm with plate 150x32 mm
Brass handles75 mm with plate 125x32 mm
Brass door latch 300x16x5 mm (0.380 kg)
Brass door latch 250x16x5 mm (0.350 kg)
Brass mortice latch and lock 100x65 mm with6 levers and a pair of
brass lever handles
Brass mortice latch 100x65mm with a pair of brass lever handles

cum
each
each
tonne
tonne
quintal
each
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each

Brass 150 mm floor door stopper (0.357kg)

Brass hard drawn hooks and eyes 300 mm
Brass hard drawn hooks and eyes 250 mm

each
10 Nos
10 Nos

sqm
sqm
sqm

each

Local Market Rates : 2229 of 2298

146
147
148
149

0420
0421
0422
0423

150

0424

151

0425

152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170

0426
0427
0428
0429
0430
0431
0432
0433
0438
0442
0444
0445
0446
0447
0449
0450
0451
0452
0453

171

0524

172

0525

173

0526

174

0527

175
176

0528
0555

177
178

0556
0557

179
180

0558
0568

181

0569

182

0570

183
184
185
186
187

0571
0583
0584
0585
0586

Brass hard drawn hooks and eyes 200 mm

Brass hard drawn hooks and eyes 150 mm
Brass hard drawn hooks and eyes 100 mm
Brass casement window fastener
Brass casement stays (straight peg type ) 300 mm weighing not less
than 0.33 kg
Brass casement stays (straight peg type ) 250 mm weighing not less
than 0.28 kg
Brass casement stays (straight peg type ) 200 mm weighing not less
than 0.24 kg
Brass quadrant stays 300 mm
Brass fanlight catch
Brass fanlight pivot
Brass chain with hook for fan light catch
Brass hasps and staples (safety type) 300 mm
Brass hasps and staples (safety type) 115 mm
Brass hasps and staples (safety type)90 mm
Brass Night latch
Brass helical spring 150 mm
Brass curtain rod 20 mm dia 1.25 mm thick
Brass curtain rod 25 mm dia 1.25 mm thick
Brass brackets (curtain rods) 20 mm
Brass cupboard knob or ward robe knob 50 mm
Brass screws 50 mm
Brass screws 40 mm
Brass screws 30 mm
Brass screws 25 mm
Brass screws 20 mm
Chromium plated Brass butt hinges (heavy) type 75x65x4 .0 mm 200
gms
Chromium plated Brass butt hinges (light/ordinary) type 125x70x4

10 Nos
10 Nos
10 Nos
Each
each
each
each
each
10 Nos
10 Nos
each
10 Nos
10 Nos
10 Nos
each
each
metre
metre
each
each
100 Nos
100 Nos
100 Nos
100 Nos
100 Nos
10 Nos
10 Nos

Chromium plated Brass butt hinges (light/ordinary) type 100x70x4mm 10 Nos

DSR-12

Chromium plated Brass butt hinges (light/ordinary) type 75x40x2.5

10 Nos

Chromium plated Brass butt hinges (light/ordinary) type 50x40x2.5

10 Nos

Chromium plated Brass handles 125 mm with plate 175 x32 mm

Chromium plated Brass handles 100 mm with plate 150 x 32 mm

Each
Each

Chromium plated Brass handles 75mm with plate 125x32 mm

Chromium plated Brass mortice latch and lock 100x65 mm with6

Each
each

Chromium plated brass casement window fastener

Chromium plated Brass casement stays (straight peg type ) 300
mmweighing not less than 0.3
Chromium plated Brass casement stays (straight peg type ) 250 mm
weighing not less than 0.
Chromium plated Brass casement stays (straight peg type ) 200 mm
weighing not less than 0.
Chromium plated Brass Night latch
Chromium plated Brass Wardrobe Knob 50 mm
Chromium plated Brass screws 50 mm
Chromium plated Brass screws 40 mm

each
each
each
each
each
each
100 Nos
100 Nos

Local Market Rates : 2230 of 2298

DSR-12

188
189
190
191
192
193

0587
0588
0589
0590
0591
0592

194

0594

195

0595

196

0596

197
198
199
200
201
202
203

0597
0608
0635
0637
0638
0639
0640

204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237

0641
0642
0643
0644
0645
0646
0647
0648
0649
0650
0651
0652
0653
0654
0655
0656
0660
0661
0662
0663
0664
0665
0666
0667
0668
0669
0670
0679
0680
0681
0682
0683
0684
0685

Chromium plated Brass screws 30 mm

Chromium plated Brass screws 25 mm
Chromium plated Brass screws 20 mm
Chromium plated Brass curtain rod 12 mm dia 1.25mm thick
Chromium plated Brass curtain rod 20 mm dia 1.25mm thick
Chromium plated Brass curtain rod 25 mm dia 1.25mm thick
Bright finished or black enameled mild steel butt hinges 125x65x2.12
mm
Bright finished or black enameled mild steel butt hinges 100x58x1.90
mm
Bright finished or black enameled mild steel butt hinges75x47x1.70
mm
Bright finished or black enameled mild steel butt hinges 50x37x1.50
mm
Nickel plated mild steel piano hinges 1 mm thick 35 mm wide
Bright finished or black enameled mild steel screws 50 mm
Bright finished or black enameled mild steel screws 40 mm
Bright finished or black enameled mild steel screws 30 mm
Bright finished or black enameled mild steel screws 25 mm
Bright finished or black enameled mild steel screws 20 mm
Bright finished or black enameled mild steel bolts and nuts 50x6 mm

100 Nos
100 Nos
100 Nos
metre
metre
metre
10 Nos

Oxidised mild steel butt hinges 125x65x2.12 mm

Oxidised mild steel butt hinges 100x58x1.90 mm
Oxidised mild steel butt hinges75x47x1.70 mm
Oxidised mild steel butt hinges50x37x1.50 mm
Oxidised mild steel parliamentary hinges150x125x27x2.8 mm
Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm
Oxidised mild steel parliamentary hinges 100x125x27x2.8 mm
Oxidised mild steel parliamentary hinges 75x100x20x2.24 mm
Oxidised mild steel single acting spring hinges 150 mm
Oxidised mild steel single acting spring hinges 125 mm
Oxidised mild steel single acting spring hinges 100 mm
Oxidised mild steel double acting spring hinges 150 mm
Oxidised mild steel double acting spring hinges 125 mm
Oxidised mild steel double acting spring hinges 100 mm
Nickel plated mild steel piano hinges 1 mm thick 35 mm wide
Oxidised mild steel sliding door bolt 300x16 mm
Oxidised mild steel sliding door bolt 250x16 mm
Oxidised mild steel door latch 300x20x6 mm
Oxidised mild steel door latch 250x20x6 mm
Oxidised mild steel tower bolt (barrel type) 250x10 mm
Oxidised mild steel tower bolt (barrel type) 200x10 mm
Oxidised mild steel tower bolt (barrel type) 150x10 mm
Oxidised mild steel tower bolt (barrel type) 100x10 mm
Oxidised mild steel handles 125 mm
Oxidised mild steel handles 100 mm
Oxidised mild steel handles75 mm
Oxidised mild steel hasps and staples(safety type) 150 mm
Oxidised mild steel hasps and staples(safety type) 115 mm
Oxidised mild steel hasps and staples(safety type)90 mm
Oxidised mild steel screws 50 mm
Oxidised mild steel screws 40 mm
Oxidised mild steel screws 30 mm
Oxidised mild steel screws 25 mm

10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
each
each
each
each
each
each
metre
each
each
each
each
each
each
each
each
each
each
each
10 Nos
10 Nos
10 Nos
100 Nos
100 Nos
100 Nos
100 Nos

10 Nos
10 Nos
10 Nos
metre
100 Nos
100 Nos
100 Nos
100 Nos
100 Nos
each

Local Market Rates : 2231 of 2298

DSR-12

238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257

0686
0687
0688
0689
0690
0691
0692
0693
0694
0696
0697
0698
0699
0700
0701
0702
0703
0704
0705
0706

258

0713

259

0714

260

0715

261

0717

262

0718

263

0719

264

0752

265

0753

266

0754

267

0755

268
269
270
271
272
273
274
275
276
277
278
279
280
281

0757
0759
0761
0763
0769
0770
0771
0773
0775
0776
0777
0784
0785
0788

Oxidised mild steel screws 20 mm

Anodised Aluminium butt hinges 125x75x4 mm
Anodised Aluminium butt hinges 125x63x4 mm
Anodised Aluminium butt hinges 100x75x4 mm
Anodised Aluminium butt hinges 100x63x3.2 mm
Anodised Aluminium butt hinges 100x63x4 mm
Anodised Aluminium butt hinges 75x63x4 mm
Anodised Aluminium butt hinges 75x63x3.2 mm
Anodised Aluminium butt hinges 75x45x3.2 mm
Anodised Aluminium sliding door bolt 300x16 mm
Anodised Aluminium sliding door bolt 250x16 mm
Anodised Aluminium tower bolt (barrel type)300x10 mm
Anodised Aluminium tower bolt (barrel type)250x10 mm
Anodised Aluminium tower bolt (barrel type)200x10 mm
Anodised Aluminium tower bolt (barrel type)150x10 mm
Anodised Aluminium tower bolt (barrel type)100x10 mm
Anodised Aluminium handles 125 mm with plate 175 x 32 mm
Anodised Aluminium handles 100 mm with plate 150 x 32 mm
Anodised Aluminium handles 75mm with plate 125 x 32 mm
Anodised Aluminium kicking plate 50 cm long100x3.15 mm
Block board construction flush door with teak wood ply on both faces
35 mm thick
Block board construction flush door with teak wood ply on both faces
30 mm thick
Block board construction flush door with teak wood ply on both faces:
25 mm thick
Block board construction flush door with commercial ply on both faces
:35 mm thick
Block board construction flush door with commercial ply on both faces
: 30 mm thick
Block board construction flush door with commercial ply on both
faces:25 mm thick
Block board construction flush door lipping

100 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
each
each
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
each
sqm

Square vision panel in Block board construction flush door

sqm of doo

Circular vision panel in Block board construction flush door

Sqm of doo

Decorative type Louvers in Block board construction flush door

sqm of doo

Rebate cutting in Block board construction flush door

sqm of doo

Decorative plywood 4 mm
Fuel wood
Glue
Cement Concrete Jali 40 mm thick
Cement Concrete Jali 25 mm thick
Kerosene oil
Unslaked lime
Dehradun white lime
Satna lime
Dry hydrated lime (factory made)
Marble dust/ powder
Marble chips up to 4mm and downsize White & black
Marble chips large size above 4 mm White & black

sqm
quintal
kilogram
sqm
sqm
litre
quintal
quintal
quintal
quintal
cum
quintal
quintal

sqm
sqm
sqm
sqm
sqm
sqm of doo

Local Market Rates : 2232 of 2298

DSR-12

282

0801

283
284

0802
0803

285

0804

286

0805

287

0806

288

0807

289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304

0808A
0810
0811
0815
0816
0820
0821
0823
0824
0826
0827
0828
0829
0830
0831
0833

305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320

0834
0835
0845
0851
0855
0856
0857
0858
0859
0863
0865
0868
0869
0870
0873
0874

321
322

0875
0876

323
324
325
326
327

0886
0966
0967
0969
0973

Silicon and acrylic emulsion

Acrylic distemper 1st quality , having VOC content less than 50 gm/kg

One Litre
One Kg

Acrylic emulsion , having VOC content less than 50 gm/litre

Premium acrylic emulsion of interior grade, having VOC content less
than 50 gm/ltr.
Synthetic enamel paint , having VOC (Volatile Organic Compound)
content less than 150 gm/l
Ready mixed pink or grey primer on wood work (hard and soft wood)
having VOC content less
Ready mixed red oxide zinc chromatic on steel/ iron work, having VOC
content less than 250
Water thinnable cement primer for interior wall surface, having VOC
content less than 50 g
Moorum
Mud (dry)
Dry distemper
Oil bound washable distemper/ Acrylic distemper
Cement primer
Distemper primer
Pink primer (for wood)
Cement base wall care putty
Aluminium paint
Acid proof paint (chocolate or black)
Anticorrosive bituminous paint (black)
Black Japan
Enamel paint
Floor enamel paint in all shades except green
Synthetic enamel paint in black or chocolate shade
Synthetic enamel paint in all shades except black or chocolate shade

One Litre
One Litre

Plastic emulsion paint

Roofing paint for iron sheets in red colour
Water proofing cement paint
Wax polish (ready made)
Ordinary varnish
Superior copal varnish
Superior spar varnish
Oil type wood preservative
Putty for wood work
Pig lead
Premixed super white gypsum plaster.
Plaster of Paris
Plug
Copper pins 6 mm dia 7.5 cm long
Black colour dark shade pigment
Red, chocolate, orange, buff or yellow (red oxide of iron) light shade
pigment
Green or blue medium shade pigment
Standard holder bat clamps for sand cast iron or cast iron pipes 150
mm dia
Sand Cast iron plain shoe 150 mm dia
Copper plate
Pulley 25 mm dia
Rolling shutter made of 80x1.25 mm machine rolled laths

litre
litre
kilogram
kilogram
litre
litre
litre
litre
kilogram
kilogram
kg
kilogram
each
each
kilogram
kilogram

One Litre
One Litre
One Litre
One Litre
cum
cum
kilogram
kilogram
litre
litre
litre
One Kg
litre
litre
litre
litre
litre
litre
litre
litre

kilogram
each
each
kilogram
each
sqm

Local Market Rates : 2233 of 2298

DSR-12

328
329
330

0974
0975
0976

331

0977

332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352

0978
0979
0980
0982
0983
0992
0994
0996
0999
1000
1001
1002
1003
1004
1005
1005-A
1006
1007
1008
1009
1010

353
354
355
356
357
358

1011
1013
1015
1019
1020
1021

359
360

1022
1023

361
362
363
364
365

1024
1025
1028
1029
1030

366
367
368
369
370
371
372
373
374
375
376

1031
1032
1034
1035
1036
1143
1149
1151
1154
1157
1158

Top cover for rolling shutters

27.5 cm long wire spring grade no 2 for rolling shutters
Ball bearing for rolling shutters
Extra for mechanical devices chain and cranked operation for
operating rolling shutters :
Extra for mechanical devices chain and cranked operation for
operating rolling shutters :
Royalty for good earth
Royalty for sludge
Coarse sand (zone III)
Fine sand (zone IV)
Galvanised steel plain sheets
Standard quality hard board sheet 3 mm thick
Standard quality hard board sheet 4.5 mm thick
Shellac
Spirit
Spun yarn
Mild steel round bar 12 mm dia and below
Mild steel round bar above 12 mm dia
Average rate of Mild steel round bars for reinforcements
Twisted steel / deformed bars
Thermo mechanically treated steel bars (for reinforcement)
Mild steel square bars
Structural steel such as tees, angles channels and R.S. joists
Flats up to 10 mm in thickness
Flats exceeding 10 mm in thickness
Mild steel plates
Steel glazed door,window/ ventilator, all members viz. F7D, F4B, K11
and K12B etc.
Mild steel sheets for tanks
Mild steel expanded metal 20x60 mm strands
Mild steel hooks
Mild steel rivets
Hard drawn steel wire fabric
Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head
with slots
Galvanised steel J or L hooks 8 mm dia
Galvanised steel bolts & nuts 10 mm dia and 125 mm long round head
with slots
Mild stel bolts 6 mm dia and 25 mm long with hexagonal head
Straining bolts
Galvanised steel barbed wire
Galvanised steel turn buckles
Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides

metre
each
each
sqm of doo

Galvanised steel bolts 10 mm dia and 7 cm long with nuts

Bolts and nuts up to 300 mm in length
Bolts and nuts above 300 mm in length
Iron pintels including welded pin
Steel beading
Glass strip 4 mm thick40 mm deep
Boundary stone top chisel dressed 15x15x90 cm
Through and bond stone
Stone for masonry work
Stone for pitching 15 cm x 22.5 cm

each
quintal
quintal
each
metre
metre
each
100 Nos
cum
cum

sqm of doo
cum
cum
cum
cum
quintal
sqm
sqm
kilogram
litre
kilogram
quintal
quintal
quintal
quintal
Qtl
quintal
quintal
quintal
quintal
quintal
One Kg
quintal
sqm
each
quintal
sqm
10 Nos
10 Nos
each
10 Nos
each
quintal
each
each

Local Market Rates : 2234 of 2298

DSR-12

377
378
379
380
381
382
383
384
385
386
387
388
389
390

1159
1160
1161
1163
1164
1165
1166
1168
1169
1174
1175
1177
1179
1182

391
392
393
394
395
396
397
398
399
400
401
402
403
404

1186
1187
1188
1189
1190
1194
1196
1197
1198
1199
1200
1201
1202
1203

405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424

1204
1207
1208
1209
1210
1211
1213
1214
1215
1216
1219
1220
1221
1222
1224
1225
1227
1228
1229
1231

425
426
427
428

1237
1241
1301
1304

Stone dust
Red sand stone block
White sand stone block
White sand stone slab 75 mm thick (un-dressed)
Red sand stone slab 40 mm thick (un-dressed)
White sand stone slab 40 mm thick (un-dressed)
Red sand stone slab 30 mm thick (un-dressed)
Kota stone slab 20 mm to 25 mm thick (semi-polished)
Kota stone slab 25mm thick (rough chiseled)
Red sand stone slab 45 mm and 50 mm thick (un-dressed)
White sand stone slab 45 mm and 50 mm thick (un-dressed)
Stone grit 6 mm and down size or pea sized gravel
Crushed stone 2.36 mm to 12.5 mm size
Surkhi
Superior class teak wood such as Dandeli, Balarshah or Malabar in
planks
First class teak wood in scantling
First class teak wood in planks
Second class teak wood in scantling
Second class teak wood in planks
Second class deodar wood in planks
First class kail wood in planks
Second class kail wood in scantling
Second class kail wood in planks
Sal wood in scantling
Kiln seasoned selected sheesum wood planks
Precast terrazzo tiles 22 mm thick (light shade)
Precast terrazzo tiles 22 mm thick(medium shade)
Precast terrazzo tiles 22 mm thick (dark shade)
Precast heat resistant terrace tiles (size 300x300 mm) and 20 mm thick

cum
10 cudm
10 cudm
sqm
sqm
sqm
sqm
sqm
Sqm
sqm
sqm
cum
cum
Cum
One Cum

G.I. Limpet washer

Bitumen washer
G.I. plain washer thick
G.I. plain washer thin
G.I. plain washer for seam bolts
Water proofing materials
Welding by gas plant
Welding by electric plant
Whiting
Wire nails
Wire mesh (rabbit)
20 mm dia holding down bolts
Mild steel sheets with bolts and nuts to rest on pintels
Hard drawn steel wire
Mild steel flat strap fitting
Chequered terrazzo tiles 22 mm thick(light shade)
Chequered terrazzo tiles 22 mm thick(medium shade)
Chequered terrazzo tiles 22 mm thick (dark shade)
Extra for selected planks of second class teakwood
Cutting marble or sand stone slab up to 50 mm thick by mechanical
device
Commercial LPG in cylinder.
Bleaching powder
Surface box for stop cock

100 Nos
100 Nos
100 Nos
100 Nos
100 Nos
kilogram
cm
cm
quintal
kilogram
sqm
quintal
each
quintal
quintal
sqm
sqm
sqm
10 cudm
metre

One Cum
One Cum
One Cum
One Cum
One Cum
One Cum
One Cum
One Cum
One Cum
One Cum
sqm
sqm
sqm
One Sqm

kg
quintal
each

Local Market Rates : 2235 of 2298

DSR-12

429
430
431
432
433
434

1305
1307
1309
1314
1315
1330

435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479

1331
1332
1334
1335
1336
1337
1339
1340
1342
1343
1350
1352
1353
1354
1355
1356
1357
1360
1361
1362
1363
1364
1366
1367
1369
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1392
1396
1397
1464
1466
1468
1470
1472

480
481

1532
1533

Surface box for sluice valve

Surface box for water meter
C.I. bracket for wash basin and sinks
C.P.brass chain with 32 mm dia rubber plug
C.P.brass chain with 40 mm dia rubber plug
Clamps and M.S. stays including bolts and nuts for 100 mm pipe
M.S.Holder bat clamp of approved design for 100 mm S.C.I. pipe

each
each
pair
each
each
each
each

M.S.Holder bat clamp of approved design for75 mm S.C.I. pipe

Clamps and M.S. stays including bolts and nuts for 50 mm pipe
Clamps and M.S. stays including bolts and nuts for 75 mm pipe
Clearing eye with chain and lid 100 mm dia
Clearing eye with chain and lid 150 mm dia
Brass bib-cock 15 mm dia
Brass bib-cock 20 mm dia
Brass stop-cock 15 mm dia
Brass stop-cock 20 mm dia
Mosquito proof coupling of approved design
C.I. cover and frame 300x300 mm inside
C.I.cover without frame 300x300mm inside i/c cover of 4.50 kg
Rectangular cover 455x610 mm with frame (low duty)
Rectangular cover 455x610mm without frame (low duty)
500 mm dia cover with frame (medium duty)
500 mm dia cover without frame (medium duty)
C.I.mouth, brass ferrule 15 mm dia
C.I.mouth, brass ferrule 20 mm dia
C.I.mouth, brass ferrule 25 mm dia
Vitreous china foot rests 250x130x30 mm
C.I. grating 100x100 mm
C.I. grating 150x150 mm
C.I. grating 180x180 mm
S.C.I. gully or nahani grating 100 mm dia
Rubber insertions for80 mm dia pipe joints
Rubber insertions for 100 mm dia pipe joints
Rubber insertions for 125 mm dia pipe joints
Rubber insertions for 150 mm dia pipe joints
Rubber insertions for 200 mm dia pipe joints
Rubber insertions for 250 mm dia pipe joints
Rubber insertions for 300 mm dia pipe joints
Rubber insertions for 350 mm dia pipe joints
Rubber insertions for 400 mm dia pipe joints
Rubber insertions for 450 mm dia pipe joints
Rubber insertions for 500 mm dia pipe joints
Rubber insertions for 600 mm dia pipe joints
Mirror of superior make glass 60x45 cm
Vitreous china pedestal for wash basin
Pig lead
S & S.C.I.standard specials up to 300 mm dia (heavy class)
S & S.C.I.standard specials over 300 mm dia (heavy class)
Flanged C.I. standard specials up to 300 mm dia(heavy class)
Flanged C.I. standard specials over 300 mm dia(heavy class)
Casing pipe 100 mm dia
Flush pipe with union spreaders and clamps all in C.P. brass for single
stall
Flush pipe with union spreaders and clamps all in C.P. brass for

each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
pair
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
kilogram
quintal
quintal
quintal
quintal
metre
each
each

Local Market Rates : 2236 of 2298

DSR-12

482
483

1534
1535

484

1540

485

1541

486

1542

487
488
489
490
491
492
493
494
495
496
497
498
499
500

1543
1545
1546
1547
1548
1549
1550
1551
1552
1555
1559
1608
1612
1614

501

1616

502

1617

503
504
505
506
507
508
509
510
511

1618
1620
1621
1622
1624
1625
1627
1628
1630

512
513
514

1631
1633
1634

515

1636

516
517
518
519
520
521
522
523
524
525
526

1637
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648

Flush pipe with union spreaders and clamps all in C.P. brass for
Flush pipe with union spreaders and clamps all in C.P. brass for
Flush pipe and spreaders G.I.for single set of one squatting plate urinal
each
Flush pipe and spreaders G.I.for range of two squatting plates urinal

each
each
each

Flush pipe and spreaders G.I.for range of three squatting plates urinal

each

Flush pipe and spreaders G.I.for range of four squatting plates urinal

each

G.I. pipes 15 mm dia

G.I. pipes 20 mm dia
G.I. pipes 25 mm dia
G.I. pipes 32 mm dia
G.I. pipes 40 mm dia
G.I. pipes 50 mm dia
G.I. pipes 65 mm dia
G.I. pipes 80 mm dia
G.I. back (jam) nuts25 mm dia
G.I. back (jam) nuts65 mm dia
G.I. tees (equal) 25 mm
G.I. tees (equal) 65 mm
G.I. inlet connection
S.C.I. soil, waste and vent single socketed pipe1.80 metres long:75mm
dia
S.C.I. soil, waste and vent single socketed pipe1.80 metres long:
100mm dia
S.C.I. soil, waste and vent single socketed pipe1.80 metres long:
150mm dia
S.C.I. plain bend75mm dia
S.C.I. plain bend 100mm dia
S.C.I. plain bend 150mm dia
S.C.I. bend with access door 75mm dia
S.C.I. bend with access door 100mm dia
S.C.I. plain single equal junctions75x75x75 mm dia
S.C.I. plain single equal junctions100x100x100 mm dia
S.C.I. single equal junctions75x75x75 mm dia with access door.
S.C.I. single equal junctions 100x100x100 mm dia with access door.

metre
metre
metre
metre
metre
metre
metre
metre
each
each
each
each
each
each

S.C.I. plain double equal junctions 75x75x75x75 mm dia

S.C.I. plain double equal junctions100x100x100x100 mm dia
S.C.I. double equal junctions75x75x75x75 mm dia with access door.

each
each
each

S.C.I. double equal junctions 100x100x100x100 mm dia with access

door
Slotted cowl (terminal guard )75 mm dia
Slotted cowl (terminal guard ) 100 mm dia
G.I. Union 15 mm nominal bore
G.I. Union 20 mm nominal bore
G.I. Union 25 mm nominal bore
G.I. Union 32 mm nominal bore
G.I. Union 40 mm nominal bore
G.I. Union 50 mm nominal bore
G.I. Union 65 mm nominal bore
G.I. Union 80mm nominal bore

each

each

each
each
each
each
each
each
each
each
each
each
each

each
each
each
each
each
each
each
each
each
each

Local Market Rates : 2237 of 2298

DSR-12

527

1649

528

1653

529

1656

530

1659

531
532
533

1662
1666
1667

534

1669

535

1670

536

1672

537

1673

538

1674

539
540
541
542
543

1677
1682
1683
1685
1686

544

1687

545

1688

546

1689

547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566

1690
1693
1700
1701
1702
1703
1704
1705
1706
1707
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718

Polyethylene water storage tank with cover and suitable locking

per litre
arrangement
Sand cast iron S&S plain single unequal junctions : 100x100x75 mm dia each
Sand cast iron S&S single unequal junctions: 100x100x75 mm dia with
access door.
Sand cast iron S&S plain double unequal junctions : 100x100x75x75
mm dia
Sand cast iron S&S double unequal junctions: 100x100x75x75 mm dia
with access door.
Sand cast iron heel rest bend75mm dia
Sand cast iron heel rest bend 100mm dia
S.C.I. single equal invert branch of required degree75x75x75 mm dia

each

S.C.I. single equal invert branch of required degree 100x100x100 mm

dia
S.C.I. double equal invert branch of required degree 75x75x75x75 mm
dia
S.C.I. double equal invert branch of required degree 100x100x100x100
mm dia
S.C.I. single unequal invert branch of required degree 100x100x75 mm
dia
S.C.I. double unequal invert branch of required degree 100x100x75x75
mm dia
S.C.I. door pieces 75 mm dia
S.C.I. door pieces 100 mm dia
S.C.I. collar 75 mm dia
S.C.I. collar 100 mm dia
Unplasticised P.V.C. connection pipe with brass union 30 cm long 15
mm bore
Unplasticised P.V.C. connection pipe with brass union 30 cm long 20
mm bore
Unplasticised P.V.C. connection pipe with brass union 45 cm long 15
mm bore
Unplasticised P.V.C. connection pipe with brass union 45 cm long 20
mm bore
S.C.I. hand pump
R.C.C. pipes NP2 class 100 mm dia
R.C.C. pipes NP2 class 150 mm dia
R.C.C. pipes NP2 class 250 mm dia
R.C.C. pipes NP2 class 300 mm dia
R.C.C. pipes NP2 class 450 mm dia
R.C.C. pipes NP2 class 500 mm dia
R.C.C. pipes NP2 class 600 mm dia
R.C.C. pipes NP2 class 700 mm dia
R.C.C. pipes NP2 class 800 mm dia
R.C.C. pipes NP2 class 900 mm dia
R.C.C. pipes NP2 class 1000 mm dia
R.C.C. pipes NP2 class 1100 mm dia
R.C.C. pipes NP2 class 1200 mm dia
R.C.C. collarsNP2 class 100 mm dia
R.C.C. collarsNP2 class 150 mm dia
R.C.C. collarsNP2 class 250 mm dia
R.C.C. collarsNP2 class 300 mm dia
R.C.C. collarsNP2 class 450 mm dia

each

each
each
each
each
each

each
each
each
each
each
each
each
each
each
each
each
each
each
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
each
each
each
each
each

Local Market Rates : 2238 of 2298

DSR-12

567
568
569
570
571
572
573
574
575
576
577
578
579
580
581

1719
1720
1721
1723
1724
1725
1726
1727
1854
1855
1856
1858
1863
1871
1872

582

1875

583
584
585
586
587
588
589

1876
1878
1879
1881
1882
1885
1889

590

1891

591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609

1893
1895
1896
1897
1898
1900
1902
1904
1913
1915
1922
1923
1924
1927
1928
1929
1930
1931
1932

610

1933

611

1934

612

1935

613

1936

R.C.C. collarsNP2 class 500 mm dia

R.C.C. collarsNP2 class 600 mm dia
R.C.C. collarsNP2 class 700 mm dia
R.C.C. collarsNP2 class 800 mm dia
R.C.C. collarsNP2 class 900 mm dia
R.C.C. collarsNP2 class 1000 mm dia
R.C.C. collarsNP2 class 1100 mm dia
R.C.C. collarsNP2 class 1200 mm dia
Stoneware pipes grade A (60 cm long) 100 mm dia
Stoneware pipes grade A (60 cm long) 150 mm dia
Stoneware pipes grade A (60 cm long) 200 mm dia
Stoneware pipes grade A (60 cm long) 250 mm dia
Fire clay kitchen sink: 600x450x250 mm
White vitreous china laboratory sink450x300x150 mm
White vitreous china laboratory sink600x450x200 mm
White plastic seat (solid)with lid C.P.brass hinges and rubber buffers

each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each

Black plastic seat (solid) with lid C.P.brass hinges and rubber buffers

each

Shower rose C.P.brass for 15 to 20 mm inlet 100 mm dia

Shower rose C.P.brass for 15 to 20 mm inlet 150 mm dia
Spun yarn
Strainer brass 40 mm dia 1.5 metre long
15 mm C.P.brass tap
C.P.brass toilet paper holder of standard size
C.I. trap for standard urinal with vent arm with operating and other
couplings in C.P.bras
C.I. trap for standard urinal with vent arm with operating and other
couplings in C.P.bras
C.P.brass trap40 mm dia
100 mm S.C.I. trap with vent heel
100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet
100 mm S.C.I. trap with 100 mm inlet and75 mm outlet
S.W. gully trap P type 100x100 mm
S.W. gully trap P type 150x100 mm
S.W. gully trap P type 180x150 mm
Vitreous china lipped front urinal
Vitreous china squatting plate urinal
H.P. or L.P. ball valve with polythene floats: 15 mm dia
H.P. or L.P. ball valve with polythene floats: 20 mm dia
H.P. or L.P. ball valve with polythene floats: 25 mm dia
Brass full way valve with C.I. wheel (screwed end) 25 mm dia
Brass full way valve with C.I. wheel (screwed end) 32 mm dia
Brass full way valve with C.I. wheel (screwed end) 40 mm dia
Brass full way valve with C.I. wheel (screwed end) 50 mm dia
Brass full way valve with C.I. wheel (screwed end) 65 mm dia
Brass full way valve with C.I. wheel (screwed end) 80 mm dia
Gunmetal non-return valve-horizontal (screwed end) 25 mm dia

each
each
kilogram
each
each
each
each

Gunmetal non-return valve-horizontal (screwed end) 32 mm dia

each

Gunmetal non-return valve-horizontal (screwed end) 40 mm dia

each

Gunmetal non-return valve-horizontal (screwed end) 50 mm dia

each

each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each

Local Market Rates : 2239 of 2298

DSR-12

614

1937

615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638

1938
1940
1941
1942
1943
1944
1945
1947
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964

639
640
641

1965
1970
1980

642
643
644
645
646
647
648
649
650
651
652
653
654
655

1984
1986
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2211
2215

656
657
658
659
660
661
662
663

2216
2224
2225
2226
2228
2241
2242
2260

Gunmetal non-return valve-horizontal (screwed end) 65 mm dia

each

Gunmetal non-return valve-horizontal (screwed end) 80 mm dia

each

C.I.sluice valve (with caps) class I : 100 mm dia

C.I.sluice valve (with caps) class I : 125 mm dia
C.I.sluice valve (with caps) class I : 150 mm dia
C.I.sluice valve (with caps) class I : 200 mm dia
C.I.sluice valve (with caps) class I : 250 mm dia
C.I.sluice valve (with caps) class I : 300 mm dia
Vitreous china flat back wash basin 630x450 mm
Vitreous china angle back wash basin 600x480 mm
Vitreous china angle back wash basin 400x400 mm
C.P. brass waste 32 mm
C.P. brass waste 40 mm
Vitreous china Indian type w.c. pan size 580 mm
Vitreous china orrisa type w.c. pan size 580 mm
Vitreous china pedestal type water closet
Bolts and nuts 16 mm dia 60 mm long
Bolts and nuts 16 mm dia 65 mm long
Bolts and nuts 20 mm dia 65 mm long
Bolts and nuts 20 mm dia 70 mm long
Bolts and nuts 20 mm dia 75 mm long
Bolts and nuts 20 mm dia 80 mm long
Bolts and nuts 24 mm dia 85 mm long
Bolts and nuts 24 mm dia 90 mm long
Bolts and nuts 27 mm dia 100 mm long
White vitreous china dual purpose closet (Anglo Indian W.C.) suitable
for use as squatting
Vitreous china foot rests 250x125x25 mm
Fly ash
Common burnt clay F.P.S.( non modular) bricks tile class designation
10
Common burnt clay modular bricks class designation 12.5
Carraige of Steam coal
Carraige of Bricks
Carraige of Stone aggregate below 40 mm nominal size
Carraige of Coarse sand
Carraige of Timber
Carraige of Steel
Carraige of Stone aggregate 40 mm nominal size and above
Carraige of Brick tiles
Carraige of Lime
Carraige of Cement
Carraige of Tar bitumen
Carraige of Soling stone & masonry stone
Carraige of Stone blocks white & red sand stone & kota stone slab

each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each

Carraige of S.W. pipes100 mm dia

Carraige of S.W. pipes150 mm dia
Carraige of S.W. pipes200 mm dia
Carraige of S.W. pipes250 mm dia
Carraige of Good earth
Carraige of Dump manure
Carraige of Brick aggregate

100 metre
100 metre
100 metre
100 metre
cum
cum
cum

pair
cum
1000 Nos
1000 Nos
tonne
1000 Nos
cum
cum
cum
tonne
cum
1000 Nos
cum
tonne
tonne
cum
tonne

Local Market Rates : 2240 of 2298

664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717

DSR-12

2261
2262
2264
2265
2267
2268
2271
2273
2275
2281
2287
2290
2299
2302
2303
2308
2309
2311
2314
2317
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2341
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2355
2356
2357
2391
2392

Carraige of Fine sand (1 part badarpur sand : 2 parts jamuna sand)

cum

Carraige of Fly ash

Carraige of Rubbish
Carraige of Moorum
Carraige of Stone dust
Carraige of Marble dust and marble chips
Carraige of G.I. pipes below 100 mm dia
Carraige of A.C.sheet and accessories
Carraige of R.C.C. pipes 100 mm dia
Carraige of R.C.C. pipes 150 mm dia
Carraige of R.C.C. pipes 250 mm dia
Carraige of R.C.C. pipes 300 mm dia
Carraige of R.C.C. pipes 450 & 500 mm dia
Carraige of G.I.sheet and accessories
Carraige of R.C.C. pipes 600, 700, 750 & 800 mm dia
Carraige of Plaster of paris
Carraige of Cast iron fittings
Carraige of Red bajri
Carraige of Barbed wire
Carraige of Sludge
Carraige of Spun iron S & S pipes 100 mm dia
Carraige of Spun iron S & S pipes 125 mm dia
Carraige of Spun iron S & S pipes 150 mm dia
Carraige of Spun iron S & S pipes 200 mm dia
Carraige of Spun iron S & S pipes 250 mm dia
Carraige of Spun iron S & S pipes 300 mm dia
Carraige of Spun iron S & S pipes 350 mm dia
Carraige of Spun iron S & S pipes 400 mm dia
Carraige of Spun iron S & S pipes 450 mm dia
Carraige of Spun iron S & S pipes 500 mm dia
Carraige of Spun iron S & S pipes 600mm dia
Carraige of C.I. pipes 500 mm dia
Carraige of R.C.C. pipes 900 mm dia
Carraige of R.C.C. pipes 1000 mm dia
Carraige of R.C.C. pipes 1100 mm dia
Carraige of R.C.C. pipes 1200 mm dia
Carraige of Jamuna sand
Carraige of Pig lead
Carraige of Ductile iron pipes (k7) 100 mm dia
Carraige of Cast iron pipes 150 mm dia
Carraige of Cast iron pipes 200 mm dia
Carraige of Cast iron pipes 250 mm dia
Carraige of Cast iron pipes 300 mm dia
Carraige of Cast iron pipes 350 mm dia
Carraige of Cast iron pipes 400 mm dia
Carraige of Cast iron pipes 450 mm dia
Carraige of Cast iron pipes 500 mm dia
Carraige of Cast iron pipes 600 mm dia
Carraige of Cast iron pipes 700 mm dia
Carraige of Cast iron pipes 800 mm dia
Carraige of Cast iron pipes 900 mm dia
Carraige of Cast iron pipes 1000 mm dia
Strips-Aluminium fluted 3.15mm thick and 150mm wide
Strips Aluminium fluted 3.15mm thick and 200mm wide metre

cum
cum
cum
cum
cum
tonne
tonne
100 metre
100 metre
100 metre
100 metre
100 metre
tonne
100 metre
tonne
tonne
cum
tonne
cum
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
cum
tonne
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
metre
Metre

Local Market Rates : 2241 of 2298

DSR-12

718
719
720
721
722
723

2393
2394
2395
2396
2397
2398

724

2406

725
726
727
728

2407
2412
2413
2447

729

2449

730

2451

731

2452

732

2453

733
734

2454
2455

735
736

2456
2459

737
738
739

2464
2465
2466

740
741
742
743
744
745

2467
2468
2469
2470
2471
2480

746

2481

747
748
749
750

2483
2500
2504
2505

751

2506

752

2507

753

2508

754

2509

755

2510

1 mm thick Stainless Steel Cover plate grade 304

Coupler 16 mm dia
Coupler 20 mm dia
Coupler 25 mm dia
Coupler 28 mm dia
Coupler 32 mm dia
Float glass sheet of nominal thickness 4 mm (weight not less than
10kg/sqm).
Float glass sheet of nominal thickness 5.5 mm.(weight not less than
13.50 kg/sqm).
Ply wood 5 ply with commercial ply on both faces 6 mm thick
12 mm commercial ply
Hollock ballies 125 mm diameter
Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x 42 mm
with screws, bolts
Brass cupboard lock 6 levers (best make of approved quality) 40 mm
size
Brass cupboard lock 6 levers (best make of approved quality) 50 mm
size
Brass cupboard lock 6 levers (best make of approved quality) 65 mm
size
Brass cupboard lock 6 levers (best make of approved quality) 75 mm
size
Brass hanging type door stopper 150 mm
Hydraulic door closer bottle type M.S. body with necessary accessories
and screws complet
Anodised Aluminium hanging type door stopper
Anodised Aluminium pull bolt lock (locking bolt) of size 85 mmx42mm
with screws, bolts
Anodised Aluminium Casement stay 250 mm
Hollock wood in scantling
Chromium plated Brass pull bolt lock (locking bolt) of size 85
mmx42mm with screws, bolt
Nickeled Chromium Brass cupboard lock 40 mm size
Nickeled Chromium Brass cupboard lock 50 mm size
Nickeled Chromium Brass cupboard lock 65 mm size
Nickeled Chromium Brass cupboard lock 75 mm size
Ply wood 5 ply with teak ply on both faces 9 mm thick
Ply wood 5 ply with teak ply on one face and commercial ply on
another face 9 mm thick
Ply wood 7 ply with teak ply on one face and commercial ply on
another face 9 mm thick
Extra for selected planks of second class deodar wood
Kiln seasoning of timber
Hollock wood in planks
Carben Steel galvanised dash fastner (min 5 micron) of 10 mmdia
double threaded 6.8 grade
Carben Steel galvanised dash fastner (min 5 micron) of 10 mmdia
double threaded 6.8 grade
Carben Steel galvanised dash fastner (min 5 micron) of 10 mmdia
double threaded 6.8 grade
Carben Steel galvanised dash fastner (min 5 micron) of 10 mmdia
double threaded 6.8 grade
Carben Steel galvanised dash fastner (min 5 micron) of 10 mmdia
double threaded 6.8 grade

One Kg
Each
Each
Each
Each
Each
sqm
sqm
sqm
One Sqm
metre
each
each
each
each
each
each
each
each
each
each
cum
each
each
each
each
each
sqm
sqm
sqm
one cum
cum
one cum
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos

Local Market Rates : 2242 of 2298

DSR-12

756

2602

757
758
759
760

2603
2704
2708
2709

761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776

2710
2750
2751
2901
2902
2903
2904
2908
2909
2910
2911
2914
2916
3002
3004
3050

777

3080

778

3084

779

3088

780

3092

781
782

3096
3213

783
784

3228
3229

785
786
787
788
789
790
791
792
793

3300
3311
3314
3317
3320
3321
3326
3327
3617

794

3620

795
796
797
798

3621
3624
3625
3628

Common burnt clay F.P.S. (non modular) bricks class designation7.5

1000 Nos

Common burnt clay F.P.S. bricks (non modular)class designation 5

1000 Nos

Aluminium Strip 40 mm wide and 2 mm thick

Truf Paver (500 x 500 x 40 mm)
Ceremic Tiles Pieces for Crazy Flooring
White marble makrana second quality plain veined stone pieces for
crazy flooring
8 mm thick granite stone tiles (mirror polished of all shades)
8 mm thick marble tiles (polished) Raj Nagar
Stone Aggregate (Single size) : 100 mm nominal size
Stone Aggregate (Single size) : 80 mm nominal size
Stone chippings/ screenings 4.75 mm nominal size
Stone chippings/ screenings 150 micron nominal size
Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size
Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size
Stone chippings/ screenings 12.5/ 13.2 mm nominal size
Stone chippings/ screenings 10/ 11.2 mm nominal size
Solvent
Paving Asphalt 80/100 penetration
Polyvinyl chloride sheet 400 micron thick
Stone ware spouts 100 mm dia 60 cm long
Galvanised steel corrugated sheets
Gunmetal non-return valve-horizontal (screwed end) 25 mm dia

kilogram
One Sqm
One Qtl
quintal

Gunmetal non-return valve-horizontal (screwed end) 32 mm dia

each

Gunmetal non-return valve-horizontal (screwed end) 40 mm dia

each

Gunmetal non-return valve-horizontal (screwed end) 50 mm dia

each

Gunmetal non-return valve-horizontal (screwed end) 65 mm dia

each

Vitreous china Surgeon type wash basin of size 660x460 mm

600x120 mm glass shelf with anodised aluminium angle frame,
C.P.brass brackets and guard r
Vitreous china flat back wash basin 550x400 mm
Gunmetal non-return valve-horizontal (screwed end) 80 mm dia

each
each

C.I.sluice valve (with caps) class II : 100 mm dia

C.I.sluice valve (with caps) class II : 125 mm dia
C.I.sluice valve (with caps) class II : 150 mm dia
C.I.sluice valve (with caps) class II : 200 mm dia
C.I.sluice valve (with caps) class II : 250 mm dia
C.I.sluice valve (with caps) class II : 300 mm dia
15 mm Battery Based Sensor Pillar Cock
C.P. Brass union 40 mm dia
C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres
long:100mm dia
C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres long:75mm
dia
S.C.I. S&S bends with access door100mm dia
S.C.I. S&S bends with access door75mm dia
S.C.I. S&S bend100mm dia

each
each
each
each
each
each
Each
each
each

sqm
sqm
cum
cum
cum
cum
cum
cum
cum
cum
kilogram
tonne
sqm
each
quintal
each

each
each

each
each
each
each

Local Market Rates : 2243 of 2298

DSR-12

799
800
801
802
803

3629
3634
3635
3640
3641

804
805
806
807

3644
3645
3650
3651

808

3654

809
810
811

3655
3660
3664

812

3670

813

3674

814

3681

815

3682

816

3685

817

3686

818

3690

819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839

3695
3699
3707
3708
3712
3713
3716
3717
3728
3729
3733
3734
3738
3739
3746
3747
3749
3860
3861
4001
4002

840

4006

S.C.I. S&S bend75mm dia

S.C.I. S&S heel rest sanitary bend 100mm dia
S.C.I. S&S heel rest sanitary bend 75mm dia
S.C.I. S&S single equal junctions100x100x100 mm
S.C.I. S&S single equal junctions75x75x75 mm
S.C.I. S&S single equal junctions with access door 100x100x100 mm

each
each
each
each
each
each

S.C.I. S&S single equal junctions with access door 75x75x75 mm

S.C.I. S&S double equal junctions100x100x100x100 mm
S.C.I. S&S double equal junctions75x75x75x75 mm
S.C.I. S&S double equal junctions with access door 100x100x100x100
mm.
S.C.I. S&S double equal junctions with access door 75x75x75x75 mm

each
each
each
each

S.C.I. S&S single unequal junctions100x100x75 mm

S.C.I. S&S single unequal junctions with access door
S.C.I. S&S double unequal junctions100x100x75x75 mm 100x100x75
mm
S.C.I. S&S double unequal junctions with access door 100x100x75x75
mm
S.C.I. S&S single equal invert branch of required degree 100x100x100
mm dia
S.C.I. S&S single equal invert branch of required degree 75x75x75 mm
dia
S.C.I. S&S double equal invert branch of required
degree100x100x100x100 mm dia
S.C.I. S&S double equal invert branch of required degree 75x75x75x75
mm dia
S.C.I. S&S single unequal invert branch of required degree100x100x75
mm dia
S.C.I. S&S double unequal invert branch of required
degree100x100x75x75 mm dia
S.C.I. S&S, 75 mm offset for75 mm dia pipe
S.C.I. S&S, 150 mm offset for75 mm dia pipe
S.C.I. S&S, 150 mm offset for100 mm dia pipe
S.C.I. S&S, 114 mm offset for75 mm dia pipe
S.C.I. S&S, 114 mm offset for100 mm dia pipe
S.C.I. S&S, 152 mm offset for75 mm dia pipe
S.C.I. S&S, 152 mm offset for100 mm dia pipe
S.C.I S&S door pieces 100 mm dia
S.C.I S&S door pieces 75 mm dia
S.C.I S&S, Slotted Cowl (Terminal Guard) 100 mm
S.C.I S&S, Slotted Cowl (Terminal Guard) 75 mm
S.C.I S&S, collars 100 mm
S.C.I S&S, collars 75 mm
S.C.I. S&S, 76 mm offset for75 mm dia pipe
S.C.I. S&S, 76 mm offset for100 mm dia pipe
Vitreous china toilet paper holder of standard size
560 mm dia cover with frame (Heavy duty)
560 mm dia cover without frame (Heavy duty)
Stainless steel (Grade-304)hollow section round/square tubes
Stainless steel bolts/square bar and plates
Pressed steel door frames (mild steel sheet 1.25mm) Profile B

each
each
each

each

each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
One Kg
One Kg
metre

Local Market Rates : 2244 of 2298

DSR-12

841

4007

842
843
844
845
846
847
848
849
850
851
852
853
854

4008
4009
4010
4011
4012
4013
4201
4202
4203
4204
4205
4206
4207

855
856
857
858
859

6001
6007
6010
6019
6501

860

7001

861
862
863
864

7003
7004
7005
7006

865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882

7008
7009
7010
7011
7012
7013
7014
7015
7016
7017
7018
7019
7020
7021
7022
7023
7024
7028

883
884
885

7029
7030
7031

886
887

7032
7033

Pressed steel door frames (mild steel sheet 1.25mm) Profile C

metre

Pressed steel door frames (mild steel sheet 1.25mm) Profile E

metre

Mild steel tubes hot finished welded type

Mild steel tubes hot finished seamless type
Mild steel tubes electric resistant or induction butt welded
Circular C.I. Box for ceiling fan
Pulley 40 mm dia
Aluminium primer
Red oxide Zinc chromate primer
Copper acetate
Hydrochloric acid
Copper chloride
Copper nitrate
Ammonium chloride
White marble slab Makrana second quality plain veined 18 mm thick

kilogram
kilogram
kilogram
each
each
litre
litre
kilogram
kilogram
kilogram
kilogram
kilogram
sqm

Pink marble slab plain 18mm thick

Udaypur green marble slab plain 18mm thick
Black Zebra marble slab plain 18mm thick
River Sand
Brass 100mm mortice latch and lock with6 levers without pair of
handles
Pair of Anodised Aluminium lever handles for 100mm mortice latch
and lock
Vitreous china flat back wash basin 450x300 mm
Vitreous china 10 litres low level cistern without fittings
Vitreous china 10 litres low level cistern with fittings
Common burnt clay F.P.S. clay fly ash bricks class designation 7.5

sqm
sqm
sqm
cum
each

Gypsum board
Ceiling sections
Perimeter channel
Intermediate channel
Ceiling angle
Connecting clips
Soffit cleat
Joint filler
Joint finisher
Joint tape roll
Dash fastener/ Chemical fastener
All drive screws ( for gypsum board)
Primer ( for gypsum board)
Chlorpyriphos 20% E.C. / Lindane 20% E.C.
Chromium plated brackets ( curtain rods)
Acid Proof cement
12.5 mm thick Fully Perforated gypsum board
Galvanised wire mesh of average width of aperture 1.4 mm and
nominal dia. of wire 0.63 mm
12.5 mm thick tapered edge gypsum fire resistant board
12.5 mm thick tapered edge gypsum moisture resistant board
Frosted glass sheet of nominal thickness 4 mm (weighing not less than
10 kg/sqm)
Nickel plated M.S. pipe 25 mm dia.

sqm
metre
metre
metre
metre
each
each
kilogram
kilogram
roll
each
100 Nos
litre
litre
each
tonne
One Sqm
sqm

each
each
each
each
1000 Nos

One Sqm
One Sqm
sqm
metre

Local Market Rates : 2245 of 2298

DSR-12

888
889
890
891
892
893
894
895
896
897
898
899
900
901

7034
7035
7036
7040
7044
7045
7046
7047
7048
7049
7050
7051
7052
7053

902
903

7055
7056

904
905

7059
7060

906

7063

907

7064

908

7065

909

7070

910
911
912
913
914

7071
7072
7073
7074
7075

915
916
917
918
919

7076
7077
7087
7090
7091

920

7095

921

7096

922

7097

923

7098

924

7101

925

7102

926
927

7103
7104

Nickel plated M.S. pipe 20 mm dia.

Nickel plated M.S. Brackets for curtain rod 20 mm
Nickel plated M.S. Brackets for curtain rod 25 mm
Oxidised mild steel screws 35 mm
Rolling shutters of 80x0.90 mm laths
Rolling shutters of 80x1.2 mm laths
Top cover of Rolling shutters 0.90 mm thick
Top cover of Rolling shutters 1.20 mm thick
Rawl plug 50 mm (designation 10 no.)
Teak wood lipping of size 25x3 mm in pelmets
PU Primer
40 mm (average) PU spray having 40-45 kg/cum density
GI wire netting 3/4" x 24 G
400 G polythene sheet
Flat pressed 3 layer and graded particle board (medium density) Grade
1 conforming to IS :
Aluminium tee channel (heavy duty) with rollers and stop end
Aluminium hanging floor door stopper with twin rubber & stopper

metre
each
each
100 Nos
sqm
sqm
metre
metre
each
metre
One Sqm
One Sqm
One Sqm
One Sqm
sqm

Hydraulic door closer tubular type Aluminium section body

Oxidised M.S.casement stay (straight peg type) 300 mm not less than
0.33 kg
Oxidised M.S.casement stay (straight peg type) 250 mm not less than
0.28 kg
Oxidised M.S.casement stay (straight peg type) 200 mm not less than
0.24 kg
Chequered precast cement concrete tiles 22mm thick using marble
chips of size 6mm - Light
White marble Raj Nagar plain 20 mm thick (slab area 0.10 sqm to 0.20
sqm)
Wall mounted water closet
Adjustable Vetrious China Cistern with fittings
White Vetrious China Waterless Urinal
Cistern with fittings for Waterless Urinal
White Vetrious Urinal (battery based infrared sensor operated 610x390x370mm)
Acid and alkali resistant tiles 300x300 mm size, 10 mm thick
S.C.I. Tee 150 mm
Expanded polystyrene type N- Normal
Expanded polystyrene type - SE
Stainless steel kitchen sink - with drain board bowl depth 250 mm.

each
each

Stainless steel kitchen sink - with drain board 510 x 1040mm bowl
depth 225 mm.
Stainless steel kitchen sink - with drain board 510 x 1040mm bowl
depth 200 mm.
Stainless steel kitchen sink - with drain board 510x1040mm bowldepth
178 mm
Stainless steel kitchen sink - without drain board 610x510mm bowl
depth 200 mm.
Stainless steel kitchen sink - without drain board 610x460mm bowl
depth 200 mm.
Stainless steel kitchen sink - without drain board 470x420mm bowl
depth 178 mm
Coloured Orissa pattern W.C. pan 580x440 mm

each

metre
each

each
each
sqm
sqm
Each
Each
Each
Each
Each
10 Nos
each
sqm
sqm
each

each
each
each
each
each
each

Local Market Rates : 2246 of 2298

DSR-12

928
929

7105
7106

930
931

7107
7112

932

7113

933

7114

934
935

7115
7116

936

7117

937

7118

938

7119

939

7120

940

7123

941

7126

942
943
944

7127
7128
7129

945

7130

946

7131

947

7132

948

7133

949

7134

950

7135

951

7136

952

7137

953

7139

954

7143

955

7151

956

7154

957

7155

Coloured Pedestal type W.C. pan 580x440 mm (European type)

Coloured Vitreous china 10 lit. low level cistern
Coloured (other than black) solid P.V.C. seat in European W.C. pan

each
each
each

Circular shape 450 mm dia Mirror with Plastic moulded frame

Rectangular shape 453x357 mm Mirror with Plastic moulded frame

each
each

Oval shape 450x350 mm (outer dimensions) Mirror with Plastic

moulded frame
Rectangular shape 1500x450 mm Mirror with Plastic moulded frame

each

Hard board 6 mm thick

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with
length not less than 700
Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with mm
dia with length not le
Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm
dia with length not le
Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm
dia with length not le
Coloured High density polyethylene/ poly propylene 10 lit. (full flush)
capacity controlle
White Vitreous china 10 lit. (full flush) capacity controlled low level
flushing cistern
Coloured Vitreous china 10 lit. (full flush) capacity controlled low level
flushing cister
S.W. intercepting trap 100 mm dia
S.W. intercepting trap 150 mm dia
Rectangular shape 600x450 mm precast R.C.C. manhole cover with
frame - L.D. - 25
Square shape 350x350 mm precast R.C.C. manhole cover with frame L.D. - 25
Circular shape 450 mm dia precast R.C.C. manhole cover with frame

sqm
each

Rectangular shape 500x500 mm precast R.C.C. manhole cover with

frame - M.D. - 10
Circular shape 500 mm dia precast R.C.C. manhole cover with frame M.D. - 10
Circular shape 560 mm dia precast R.C.C. manhole cover with frame H.D. - 20
Circular shape 560 mm dia precast R.C.C. manhole cover with frame E.H.D. - 35
Factory made 35 mm thick shutters with laminated veneer lumber
styles rails as per TADS IS
Factory made 35 mm thick shutters with laminated veneer lumber
styles rails as per TADS IS
Factory made 35 mm thick shutters with laminated veneer lumber
styles rails as per TADS IS
Factory made 30 mm thick shutters with laminated veneer lumber
styles rails as per TADS IS
Factory made 35 mm thick shutters with laminated veneer lumber
styles rails as per TADS IS
Factory made 30 mm thick shutters with laminated veneer lumber
styles rails as per TADS IS

each

each

each
each
each
each
each
each
each
each
each
each
each

each
each
each
sqm
sqm
sqm
sqm
sqm
sqm

Local Market Rates : 2247 of 2298

DSR-12

958
959
960
961
962

7157
7178
7181
7182
7183

963
964

7184
7187

965

7188

966

7189

967

7190

968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985

7191
7192
7193
7194
7195
7196
7197
7198
7199
7208
7209
7212
7213
7214
7215
7231
7232
7233

986

7236

987
988
989
990

7237
7239
7240
7241

991

7244

992

7245

993

7246

994

7247

995

7248

996

7249

997

7250

Laminated veneer lumber confirming to TADSS IS:1995 manufactured

in factory in frames of
Chemical ASTMC-type I
C.I. pile shoe
M.S. clamps for pile shoe
Bentonite
Oxidised M.S. safety chain (weighing not less than 450 gms) for door

One cum
One Kg
kilogram
kilogram
tonne
each

C.I. grating 150 mm dia. (Weighing not less than 440 gm)
each
U-PVC pipes (working pressure 4 kg / cm2) Single socketed pipe 75
metre
mm dia.
U-PVC pipes (working pressure 4 kg / cm2) Single socketed pipe 110
metre
mm dia.
U-PVC pipes (working pressure 4 kg / cm2) Rubber (Seal) Ring 75 mm each
dia.
U-PVC pipes (working pressure 4 kg / cm2) Rubber (Seal) Ring 110 mm metre
dia.
UPVC coupler for UPVC drainage pipes 75 mm
each
UPVC coupler for UPVC drainage pipes 110 mm
each
UPVC pushfit coupler (single) 75 mm thick
each
UPVC pushfit coupler (single) 110 mm thick
each
UPVC single equal Tee (with door) 75x75x75 mm
each
UPVC single equal Tee (with door) 110x110x110 mm
each
UPVC single equal Tee (with door) 75x75x75 mm
each
UPVC single equal Tee (with door) 110x110x110 mm
each
UPVC bend 87.5o 75 mm bend
each
UPVC bend 87.5o 110 mm bend
each
UPVC plain shoe 75 mm bend
each
UPVC plain shoe 110 mm bend
each
UPVC pipe clip 75 mm bend
each
UPVC pipe clip 110 mm bend
each
Resin Bonded Glass wool 16 kg/m 50 mm thick
sqm
Resin Bonded Glass wool 24 kg/m 50 mm thick
sqm
Fibre glass tissue reinforcement Type II Grade I
sqm
Precast chequered cement tiles 22 mm thick Dark shade using ordinary sqm
cement
Precast chequered cement tiles 22 mm thick Medium shade using 50% Sqm
White cement & 50% Ordi
Epoxy paint
litre
Fire retardant paint
litre
Melamine polish
litre
Table rubbed polished stone 18 mm thick (75x50cm) Agaria Marble
sqm
stone - 18 mm thick
Table rubbed polished stone 18mm thick (75x50cm) Granite stone sqm
18mm thick
Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part- per test
IV) including
Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part- per test
IV) including
Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part- per test
IV) including
Cyclic vertical load testing of piles in accordance with IS : 2911 (Part-IV) per test
including pre
Cyclic vertical load testing of piles in accordance with IS : 2911 (Part-IV) per test
including pre

Local Market Rates : 2248 of 2298

DSR-12

998

7251

999

7252

1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011

7253
7254
7255
7256
7257
7258
7259
7260
7261
7266
7269
7271

1012
1013
1014

7272
7280
7281

1015

7295

1016
1017

7297
7306

1018
1019

7307
7309

1020

7312

1021

7313

1022

7314

1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041

7315
7318
7319
7320
7321
7322
7323
7324
7325
7326
7327
7328
7329
7330
7331
7332
7333
7334
7338

Cyclic vertical load testing of piles in accordance with IS : 2911 (PartIV) including pr
Lateral load testing of single pile in accordance with IS : 2911 part -IV
for determining
Lateral load testing of single pile in accordance with IS : 2911 part -IV
for determining
Hardening Compound
Road marking paint (spirit based)
Superior quality road marking paint
C.P. Brass bibcock 15 mm
C.P. Brass long nose bibcock 15 mm
C.P. Brass long body bibcock 15 mm
C.P. Brass stop cock (concealed) 15 mm
C.P. Brass angle valve 15 mm
Pressed clay tiles
25 mm thick particle board
IInd class teak wood lipping 25 mm wide x 12 mm thick
25 mm thick melamine faced prelaminated three layer particle board

per test

Waste plastic additive

Chemical ASTMC-type II
Granite Black marble, 18 mm thick slab, above 0.2 sqm up to 0.5 sqm
(areawise)
Granite Black marble, 18 mm thick slab, above 1.0 sqm up to 2.0 sqm
(areawise)
Aluminium T or L sections
For flush door shutters Extra for providing teak veneering on one side
instead of commerc
Paving Asphalt of grade VG-30 of approved quality
Expandable fastener with plastic sleeve and M.S. screws. 25 mm long

One MT
One Kg
sqm

Expandable fastener with plastic sleeve and M.S. screws. 32 mm long

each

Expandable fastener with plastic sleeve and M.S. screws. 40 mm long

each

Expandable fastener with plastic sleeve and M.S. screws. 50 mm long

each

Plasticizer / super plasticizer

Wall form panel 1250x500 mm
Tie bolt 12 mm dia 100 mm length
Tie bolt 12 mm dia 150 mm length
Tie bolt 20 mm dia 150 mm length
Tie bolt 20 mm dia 225 mm length
Spring coil 12 mm
Plastic cone 12 mm dia
Corner angle 45x45x5 mm 1.50 m long
100 mm channel shoulder 2.5 m long
Double clip ( bridge clip)
Single clip
M.S. tube 40 mm dia
Wall form panel 1250x450 mm
Corner angle 45x45x5 m 2.50 m long
Column clamp 450x1070 m
Prop 2 m ( 2-3.5m)
Gun metal cramp

kilogram
each
each
each
each
each
each
each
each
each
each
each
metre
each
each
each
each
kilogram

per test
per test
litre
litre
litre
each
each
each
each
each
1000 Nos
sqm
metre
sqm

sqm
kilogram
sqm
tonne
each

Local Market Rates : 2249 of 2298

DSR-12

1042
1043
1044
1045
1046
1047
1048
1049
1050
1051

7339
7342
7343
7344
7345
7346
7347
7348
7349
7354

1052
1053
1054
1055
1056
1057

7358
7359
7361
7363
7364
7366

1058

7367

1059

7369

1060

7375

1061

7376

1062

7377

1063

7378

1064

7379

1065
1066

7380
7381

1067
1068
1069
1070
1071
1072
1073
1074

7382
7387
7388
7389
7390
7391
7392
7393

1075

7394

1076
1077
1078
1079
1080
1081
1082
1083
1084

7395
7396
7397
7398
7399
7400
7401
7402
7403

Stainless steel cramp

Adjustable span ESO+SI (2.35-3.40)
Adjustable telescopic prop 3 m (2.02-3.75 m)
Beam clamp 300-380 mm (450-1070 mm)
Prop 4 m
Double coupler
Cadmium plated full threaded steel screws (30x4 mm dia.)
Aluminium washer 2 mm thick 15 mm dia
12 mm M.S. U beading
Plastic encapsulated M.S. foot rest 30x20x15 cm
Flushing Cistern P.V.C. 10 lts capacity ( low level ) (White) ( with
fittings, accessorie
P.V.C. automatic flushing cistern 5 lts capacity
P.V.C. automatic flushing cistern 10 lts capacity
15 mm C.P. brass tap with elbow operation lever
White glazed fire clay draining board 600x450x25 mm
Glass reinforced Gyp sum ( GRG) board 8.5 mm thick
Galvanised M.S. sheet 0.5 mm thick pressed channel section of size
50x32 mm
Galvanised M.S. sheet 0.50 mm thick pressed stud. 48x34x36 mm

kilogram
each
each
each set
each
each
100 Nos
100 Nos
metre
each
each

G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe
Single lipped urina
G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe
Range of two lipped
G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe
Range of three lipp
G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe
Range of four lippe
White vitreous china clay half stall urinal flat back 580x380x350 mm or
angle back 450x3
Precast R.C.C. grating with frame 500x450 mm horizontal grating

each

Precast R.C.C. grating with frame 450x100 mm vertical grating

Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887-1995

each
tonne

Spigot for standerd jointing

Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia bolt
Anodising 15 microns on aluminium sections
Neoprene/EPDM rubber gasket
Anodising 25 microns on aluminium sections
Powder coating 50 microns on aluminium sections.
Polyester powder coating 50 microns on aluminium sections
Double action hydraulic floor spring with stainless steel cover plate

One Kg
each
kilogram
metre
kilogram
kilogram
kilogram
each

6 mm dia. G.I. adjustable hangers including clips (up to 1.2 m length)

each

Double action hydraulic floor spring with brass cover plate

Base Jack
Challies
Cup Locks
15 mm PTMT bib cock
15 mm PTMT bib cock with flange (fancy)
15 mm PTMT bib cock long body with flange
15 mm dia PTMT stop cock(male thread)

each
Each
Each
Each
each
each
each
each

each
each
each
each
sqm
metre
metre

each
each
each
each
each

Local Market Rates : 2250 of 2298

DSR-12

1085
1086
1087
1088
1089
1090
1091

7405
7406
7407
7408
7409
7410
7411

1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104

7412
7415
7416
7417
7418
7419
7420
7421
7422
7423
7424
7425
7426

1105
1106
1107
1108
1109
1110

7427
7428
7429
7430
7431
7432

1111
1112
1113
1114
1115
1116
1117

7439
7442
7443
7444
7445
7449
7451

1118

7452

1119

7453

1120

7468

1121

7477

1122

7478

1123

7479

1124

7480

1125

7485

1126
1127

7486
7491

20 mm dia. PTMT stop cock

PTMT pillar cock
PTMT push cock 15 mm dia.
PTMT push cock 12 mm dia. 20 mm BSP
PTMT grating 100 mm dia.
PTMP. Pillar cock (fancy) 15mm foam flow
125 mm grating with waste hole
Rectangular type with openable circular lid 150 mm size 18 mm high
with 100 mm dia. (110 g
Double acting air valve 50 mm
Double acting air valve 80 mm
Double acting air valve 100 mm
Water meter (including testing charges) 80 mm
Water meter (including testing charges) 100 mm
Water meter (including testing charges) 150 mm
Water meter (including testing charges) 200 mm
Dirt box strainer 80 mm
Dirt box strainer 100 mm
Dirt box strainer 150 mm
Dirt box strainer 200 mm
Cats eye
Water stops Serrated with central bulb (225 mm wide, 8-11 mm thick)

each
each
each
each
each
Each
each
each

Water stops Dumb bell with central bulb

Kickers
Wedge expansion hold fastener 1/4\" or 6 mm
Wedge expansion hold fastener 3/8\" or 10 mm
Wedge expansion hold fastener 1/2\" or 12 mm
8mm thick (mirror polished tiles machine cut edge) Raj Nagar white

metre
metre
each
each
each
sqm

Wheel 75 mm dia. 40 mm wide

Aluminium single cleat of size 30x32x3
Aluminium grip strip of size 50x12x2
25 mm prelaminated flush door both side decorative
Aluminium U beading
Glass sheet (Pin headed) 4 mm thick
Raj nagar plain white marble (table rubbed and polished) 18 mm thick

each
each
each
sqm
kilogram
sqm
sqm

Raj nagar plain white marble (table rubbed and polished) 18 mm thick
above 0.20 sqm up to
Veneered particle board with commercial veneering on both sides 12
mm thick
Prelaminated particle board with one side decorative and other side
balencing lamination
Prelaminated particle board with one side decorative and other side
balencing lamination f
Prelaminated particle board with one side decorative and other side
balencing lamination f
Prelaminated particle board with both sides decorative lamination, flat
pressed 3 layer
Oxidised M. S. hinges finished with nickel plating 50 mm (Over all
width)
Oxidised M. S. hinges finished with nickel plating 65 mm (Over all
width)
PTMT Waste Coupling 31/32MM

sqm

each
each
each
each
each
each
each
each
each
each
each
each
metre

sqm
sqm
sqm
sqm
sqm
metre
metre
Each

Local Market Rates : 2251 of 2298

DSR-12

1128
1129
1130

7492
7493
7494

1131

7495

1132

7496

1133

7497

1134

7498

1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169

7499
7500
7501
7503
7504
7505
7506
7507
7508
7509
7512
7513
7514
7515
7516
7517
7518
7552
7553
7555
7556
7651
7652
7653
7654
7655
7656
7657
7658
7659
7660
7661
7662
7663
7664

1170

7665

1171

7666

1172

7668

1173

7669

PTMT Waste Coupling 38/40MM

PTMT Bottle Trap 31/32MM
PTMT Bottle Trap 38/40MM
PTMT Ball Cock 15mm Complete with Epoxy Coated Aluminium Road &
H.D. Ball
PTMT Ball Cock 20mm Complete with Epoxy Coated Aluminium Road &
H.D. Ball
PTMT Ball Cock 25mm Complete with Epoxy Coated Aluminium Road &
H.D. Ball
PTMT Ball Cock 40mm Complete with Epoxy Coated Aluminium Road &

Each
Each
Each
each

PTMT Ball Cock 50mm Complete with Epoxy Coated Aluminium Road &
H.D. Ball
PTMT Angle Stop cock with Flange 15mm
PTMT Swiveling shower 15mm
PTMT Liquid Soap Container of 400ml capacity
PTMT Towel Ring 215xd200x37mm
PTMT Towel Rail (450MM)
PTMT Towel Rail (600MM)
PTMT Shelf 450x124x36mm
PTMT Urinal Spreader 15MM
PTMT Soap Dish/Holder 138x102x75mm
PTMT handle 125x34x24mm
PTMT handle 150x34x24mm
PTMT butt hinges 75x60x10mm
PTMT butt hinges 100x75x10mm
PTMT Tower bolt 152x42x18mm
PTMT Tower bolt 202x42x18mm
PTMT door catcher 72x42mm
Coir veneered board 4mm thick
Coir veneered board 6mm thick
Coir veneered board 12mm thick
Coir veneered board 18mm thick
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 150mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 200mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 300mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 400mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 450mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 500mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 600mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 700mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 750mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 800mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 900mm dia
Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 1000mm dia

each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 100mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 150mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 200mm dia

Each

each
each
each

Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
sqm
sqm
sqm
sqm
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre

Local Market Rates : 2252 of 2298

DSR-12

1174

7670

1175

7671

1176

7672

1177

7673

1178

7674

1179

7675

1180

7676

1181

7677

1182

7678

1183

7679

1184

7680

1185

7681

1186

7682

1187

7683

1188

7684

1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211

7685
7686
7687
7688
7689
7690
7691
7692
7693
7694
7695
7696
7697
7698
7699
7700
7701
7702
7703
7704
7705
7706
7707

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 250mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 300mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 350mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 400mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 450mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 500mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 600mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 700mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 750mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 800mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 900mm dia

Each

Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 1000mm dia

Each

Ductile Iron K - 12 specials suitable for push on jointing up to 600mm

dia
Ductile Iron K - 12 specials suitable for push on jointing over 600mm
dia
Ductile Iron specials suitable for mechanical jointing as per I.S. 9523 up to 600mm dia
Ductile Iron Specials suitable for mechanical jointing as per I.S. 9523
over 600mm dia
Ductile Iron Pipe Class K-9 flanges and welding 100mm dia
Ductile Iron Pipe Class K-9 flanges and welding 150 dia
Ductile Iron Pipe Class K-9 flanges and welding 200mm dia
Ductile Iron Pipe Class K-9 flanges and welding 250mm dia
Ductile Iron Pipe Class K-9 flanges and welding 300mm dia
Ductile Iron Pipe Class K-9 flanges and welding 350mm dia
Ductile Iron Pipe Class K-9 flanges and welding 400mm dia
Ductile Iron Pipe Class K-9 flanges and welding 450mm dia
Ductile Iron Pipe Class K-9 flanges and welding 500mm dia
Ductile Iron Pipe Class K-9 flanges and welding 600mm dia
Ductile Iron Pipe Class K-9 flanges and welding 700mm dia
S&S Centrifugally (Spun) C.I. Pipe class LA 100mm dia
S&S Centrifugally (Spun) C.I. Pipe class LA 125mm dia
S&S Centrifugally (Spun) C.I. Pipe class LA 150mm dia
S&S Centrifugally (Spun) C.I. Pipe class LA 200mm dia
S&S Centrifugally (Spun) C.I. Pipe class LA 250mm dia
S&S Centrifugally (Spun) C.I. Pipe class LA 300mm dia
S&S Centrifugally (Spun) C.I. Pipe class LA 350mm dia
S&S Centrifugally (Spun) C.I. Pipe class LA 400mm dia
S&S Centrifugally (Spun) C.I. Pipe class LA 450mm dia
S&S Centrifugally (Spun) C.I. Pipe class LA 500mm dia
S&S Centrifugally (Spun) C.I. Pipe class LA 600mm dia

Quintal
Quintal
Quintal
Quintal
Metre
metre
Metre
Metre
metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
metre
metre
Metre
Metre
Metre
metre
Metre
Metre
Metre
Metre

Local Market Rates : 2253 of 2298

DSR-12

1212

7708

1213

7709

1214

7710

1215

7711

1216

7712

1217

7713

1218

7714

1219

7715

1220

7716

1221

7717

1222

7718

1223

7719

1224

7720

1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238

7721
7722
7723
7724
7725
7726
7727
7728
7729
7730
7731
7732
7733
7734

1239

7735

1240
1241

7736
7737

1242
1243
1244

7738
7739
7741

1245
1246
1247
1248

7742
7743
7744
7745

S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for
lead jointing up
S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for
lead jointing ove
S&S Centrifugally (Spun) C.I. Pipe specials suitable for mechanical joint
as per I.S. 1338
S&S Centrifugally (Spun) C.I. Pipe Specials suitable for mechanical joint
as per IS 13382
Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B
conforming to I.S.
Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B
conforming to I.S.
Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B
conforming to I.S.
Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B
conforming to I.S.
Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B
conforming to I.S.
Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B
conforming to I.S.
Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B
conforming to I.S.
Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B
conforming to I.S.
Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B
conforming to I.S.
Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B
conforming to I.S.
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 150mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 200mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 250mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 300mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 350mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 400mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 450mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 500mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 600mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 700mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 800mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 900mm dia
Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 1000mm dia

Quintal

Extruded burnt flyash clay sewer bricks conforming to I.S 4885 - 1988

1000 Nos

Quintal
Quintal
Quintal
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
metre
Metre
Metre
metre
metre

Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894-1989

1000 Nos
Calcium Silicate Bricks machine moulded confirming to I.S. 4139 - 1989 1000 Nos
Modified Bitumen Refinery produced CRMB - 55
Tonne
Modified Bitumen Refinery produced CRMB - 60
tonne
Bitumen emulsion medium setting (M.S.) confirming to IS : 8887-1995 tonne
M.S. pipe 150 mm dia casing pipe
M.S. pipe 200 mm dia casing pipe
PVC blind pipe 150 mm dia as per IS: 12818

One Metre
One Metre
One Metre

Local Market Rates : 2254 of 2298

DSR-12

1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273

7746
7747
7748
7749
7750
7751
7752
7753
7755
7757
7758
7759
7760
7761
7762
7763
7764
7765
7766
7767
7768
7769
7770
7771
7775

1274

7800

1275

7801

1276

7802

1277

7803

1278

7804

1279

7805

1280

7806

1281

7807

1282

7808

1283
1284
1285
1286
1287
1288

7809
7850
7857
7858
7859
7861

1289

7862

1290
1291

7863
7864

PVC blind pipe 200 mm dia as per IS: 12818

M.S. cap 150 mm dia
M.S. cap 200 mm dia
M.S bail plug 150 mm dia
M.S bail plug 200 mm dia
PVC slotted pipe 150 mm dia as per IS: 12818
PVC slotted pipe 200 mm dia as per IS: 12818
Boulder 50 mm to 200 mm
Gravel 1.5 mm to 2 mm
M.S. pipe 100 mm dia casing pipe
uPVC blind pipe 100 mm dia as per IS: 12818
uPVC slotted pipe 100 mm dia as per IS: 12818
M.S. cap 100 mm dia
M.S. bail plug 100 mm dia
Precast R.C.C. perforated slab
Water supply tanker of 5000 litre capacity
M.S. socket 100 mm dia
M.S. socket 150 mm dia
M.S. socket 200 mm dia
Stone cleaning chemical approved by ASI
Water repallent chemical approved by ASI
Stone surface strengthening chemical approved by ASI
Turpentine oil
Liquid Amonia 5%
Sodium pentachlorophenate
Ceramic Glazed Tiles Ist quality minimum thickness 5mm in all colours
shades and designs e
Ceramic Glazed Tiles Ist quality 300 x 300mm in all shades and designs
of White, Ivory, gr
Ceramic Glazed Tiles Ist quality 300 x 300 in all shades designs except
White, Ivory, Grey
Rectified Ceramic Glazed Tiles Ist quality 300x 300 or more in all
shades designs Whi
Rectified Ceramic Glazed Tiles Ist quality 300 x 300 or more in all
shades designs excep
Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan 724mm
X 578mm
Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X 355mm

One Metre
Each
Each
Each
Each
One Metre
One Metre
One Cum
One Cum
One Metre
One Metre
One Metre
Each
Each
Each
Each
One Metre
Each
Each
One Litre
One Litre
One Litre
One Litre
One Litre
One Kg
sqm

Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X 345mm

each

Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm outlet

each

Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm outlet

each

Agaria White marble slab plain 18mm thick

P.T.M.T. Grating square slit 150mm
P.T.M.T. Urinal cock 15mm dia
P.T.M.T. Bib cock with nozzle 15mm
P.T.M.T. Stop cock (concealed) 15mm
15 mm nominal bore and 30 cm length PVC connection pipe with
P.T.M.T. Nuts
15 mm nominal bore and 45 cm length PVC connection pipe with
P.T.M.T. Nuts
P.T.M.T. extension nipple 15mm

sqm
each
each
each
each
each

sqm
sqm
sqm
sqm
each
each

each
each

Local Market Rates : 2255 of 2298

1292
1293
1294

7865
7866
7900

1295

7901

1296

7902

1297
1298

7903
7904

1299

8001

1300
1301

8002
8003

1302
1303

8004
8006

1304
1305

8010
8011

1306
1307
1308
1309

8014
8100
8200
8201

1310

8203

1311

8204

1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322

8205
8206
8207
8210
8211
8212
8214
8215
8216
8217
8218

1323

8219

1324

8220

1325
1326
1327
1328
1329
1330
1331
1332

8221
8222
8223
8224
8225
8300
8301
8302

P.T.M.T. extension nipple 20mm

P.T.M.T. extension nipple 25mm
Common burnt clay Modular bricks of class designation 7.5
Machine moulded perforated FPS (non modular) bricks of class
designation 12.5
Machine moulded modular perforated bricks of class designation 12.5

each
each
1000 Nos
1000 Nos

Machine moulded common burnt clay F.P.S. (non modular) bricks of

class designation 12.5
Machine moulded tile bricks of class designation 12.5
24 mm thick Factory made shutters with frame, rails and panels of PVC
extruded sections in
30 mm thick Factory made shutters with frame, rails and panels of PVC
extruded sections in
Factory made PVC rigid foam paneled shutter i/c carriage
Factory made PVC rigid foam paneled shutter as per IS : 4020 i/c
carriage
Factory made PVC rigid foam sheet 1mm thick
48mmX40mmX1.5mm thick Factory made door frame of PVC extruded
sections in white, grey or w
Factory made door frame PVC extruded sheet i/c carriage
Factory made door frame of size 50x47mm with wall thickness 5 mm
made of single piecs extr
Powder coated M.S. butt hinges 100mm X58mmX1.9mm
A.P.P. modified polymeric felt (two layers) 1.5 mm thick
A.P.P. modified polymeric felt (two layers) 2 mm thick
A.P.P. modified 2 mm thick membrane reinforced with glass fibre matt

1000 Nos

1000 Nos

1000 Nos
sqm
sqm
sqm
sqm
sqm
Metre
metre
One Metre
10 Nos
sqm
sqm
sqm

A.P.P. modified 3 mm thick membrane reinforced with glass fibre matt sqm
A.P.P. modified 3 mm thick membrane reinforced with polyester matt sqm

DSR-12

Bitumen primer for bitumen membrane

Geotextile 120 gsm membrane
Stainless steel screws 50 mm
Stainless steel screws 40 mm
Stainless steel screws 30 mm
Stainless steel screws 20 mm
Stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked
Stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked
Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked
Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked
Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS : 12817
marked
Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 12817
marked
Stainless steel butt hinges (heavy weight) 75x50x2.5 mm IS : 12817
marked
M.S. heavy weight but hinges 125x90x4.0mm IS : 1341 marked.
M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 marked
M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked
M.S. heavy weight butt hinges 50x40x2.5 mm IS : 1341 marked
1216 mm PE-AL-PE Composite pressure pipe
1620 mm PE-AL-PE Composite pressure pipe
2025 mm PE-AL-PE Composite pressure pipe

litre
sqm
100 Nos
100 Nos
100 Nos
100 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos.
10 Nos
10 Nos
Metre
Metre
Metre

Local Market Rates : 2256 of 2298

DSR-12

1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344

8303
8304
8305
8501
8502
8504
8505
8506
8507
8508
8509
8510

1345

8589

1346

8590

1347

8591

1348

8592

1349
1350

8593
8595

1351

8597

1352

8598

1353

8599

1354

8600

1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374

8601
8602
8604
8605
8606
8607
8608
8609
8610
8611
8612
8613
8614
8615
8616
8617
8620
8621
8622
8623

1375

8625

2532 mm PE-AL-PE Composite pressure pipe

3240 mm PE-AL-PE Composite pressure pipe
4050 mm PE-AL-PE Composite pressure pipe
Polymer modified cementation coating
Fibre glass cloth
Multi surface paint
Acrylic exterior paint
Premium Acrylic exterior paint
Textured exterior paint
Primer for cement paint
Special Primer (C.W.)
Metal Primer (U.G.)
Calcium Silicate tegular edged celling tiles 595x595 mm and 15 mm
thick
Galvanised Steel main Tee ceiling section Size 24 x 38 x 0.33 mm (3
metre long)
Galvanised Steel perimeter wall Angle Size 24 x 24 x 0.40 mm (3.00
metre long)
Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33 mm
(1.2 metre long)
Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33 mm (
0.6 metre long)
Wooden screws with plastic rawl plugs 35x8 mm
GI Metal Tile Clip in Plain Beveled edge global white colour tiles of size
600x600 mm and
GI Metal Tile Clip in Perforated Beveled edge global white colour tiles
of size 600x600 mm
G.I Metal Tile Lay-in plain Tegular edge global white color tiles of size
595x595mm and 0.
GI Metal Tile Lay-in Perforated Tegular edge global white color tiles of
Size 595x595 mm a
PVC Laminated Gypsum Tiles (Square edge) of Size 595x595 mm and
12.5 mm thick
Polished Porcelain floor tiles 50x50 cm
Spring T-section 24x34x0.45 mm (3.00 meter long)
C Wall angle section 20x30x20x0.50 mm (3.00 meter long)
Main C Carrier Size 10x38x10x0.70 mm (3.00 meter long)
Spring T-connector
C Carrier Connector
C Suspension Clip
Wire Coupling Clip
Main T ceiling sections 24x38x0.3 mm (3 metre long)
Perimeter wall angle 21x21 mm (3 metre long)
Intermediate cross channel (1.2 mtrs)
Intermediate cross channel (1.6 mtrs)
Hanger rod 0.5 mm thick
Adjustment clip
Soffit cleat
Vitrified floor tile 50x50 cm
Vitrified floor tile 60x60 cm
Vitrified floor tile 80x80 cm
Vitrified floor tile 100x100 cm
Poly propylene- Random - Co - Polymer (PPR) pipes SDR 7.4 - 16 Outer
dia

Metre
Metre
Metre
kilogram
sqm
litre
litre
litre
litre
litre
litre
litre
One Sqm
Each
Each
Each
Each
Each
One Sqm
One Sqm
One Sqm
One Sqm
One Sqm
Sqm
One Metre
One Metre
One Metre
Each
Each
Each
Each
each
each
each
each
each
each
each
sqm
sqm
sqm
sqm
Metre

Local Market Rates : 2257 of 2298

DSR-12

1376

8626

1377

8627

1378

8628

1379

8629

1380

8630

1381

8631

1382

8632

1383

8633

1384

8634

1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397

8635
8636
8637
8638
8639
8640
8641
8642
8643
8644
8645
8646
8647

1398

8648

1399

8649

1400

8650

1401

8651

1402

8652

1403
1404
1405
1406
1407
1408
1409
1410
1411

8653
8654
8655
8656
8657
8658
8659
8660
8661

1412
1413

8662
8663

Poly propylene - Random - Co - Polymer (PPR) pipes SDR 7.4 - 20mm

Outer dia.
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 25 mm
outer dia.
Poly propylene - Random - Co - poymer (PPR) pipes SDR 7.4 - 32 mm
Outer dia.
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 40mm
Outer dia.
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 50mm
Outer dia.
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 63mm
Outer dia.
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 75mm
Outer dia.
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 90mm
Outer dia.
Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11 - 110mm
Outer dia.
Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11- 160mm
Outer dia.
Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia.
Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia.
Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia.
Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia.
Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia.
Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia.
Chlorinated Polyvinyl - chloride (CPVC) pipe 62.5mm inner dia.
Chlorinated Polyvinyl - chloride (CPVC) pipe 75 mm inner dia.
Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm inner dia.
Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm inner dia.
Silicon sealant.
Stainless steal screws 30mm x4mm.
Hermetically sealed double glazed unit made with 6mm thick clear
float glass both side ha
Stainless steel (SS 304 grade) adjustable friction window stay. 205
x19mm
Stainless steel (SS 304 grade) adjustable friction window stay 255
x19mm
Stainless steel (SS 304 grade) adjustable friction window stay. 355
x19mm
Stainless steel (SS 304 grade) adjustable friction window stay. 510 x 19
mm
Stainless steel (SS 304 grade) adjustable friction window stay. 710 x
19mm
Masking tape.
Autoclaved aerated cement (AAC) blocks.
Gypsum panel 666 X 500 X 100 mm size.
Bonding plaster for Gypsum panel.
Mechanised Autoclaved fly ash sand lime non modular bricks.
Water proof ply 12mm thick.
Aluminium casement window fastener (Anodised AC 15 )
Aluminium casement window fastener (powder coated ).
Aluminium casement window fastener (polyester powder coated).

Metre

Aluminium round shape handle (anodised AC 15)

each

Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
cartridge
cent
sqm
each
each
each
each
each
metre
cum
sqm
kg
1000 Nos
sqm
each
each
each

Local Market Rates : 2258 of 2298

DSR-12

1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427

8664
8665
8666
8667
8668
8669
8670
8671
8672
8673
8674
8675
8676
8677

1428
1429
1430
1431
1432
1433
1434
1435
1436
1437

8678
8682
8683
8684
8685
8686
8687
8688
8689
8690

1438
1439
1440
1441

8691
8692
8693
8694

1442

8695

1443

8696

1444

8697

1445
1446
1447
1448

8698
8699
8700
8703

1449

8704

1450
1451

8705
8706

1452

8707

1453

8708

1454
1455

8709
8710

1456

8712

Aluminium round shape handle (powder coated)

Aluminium round shape handle (polyester powder coated).
Stainless steel screws 25mm x4mm
UV stabilised 2 mm thick plain FRP sheet .
UV stabilised 2 mm thick corrugated FRP sheet .
Mangalore ridge tiles 20mm thick.
Mangalore tiles 20mm thick.
Precoated galvanised iron profile sheet 0.50 mm TCT
Precoated galvanised steel plain ridges.
Precoated galvanised steel flashings/aprons.
Precoated galvanised steel gutter
Precoated galvanised steel north light curves.
Precoated galvanised steel barge board.
Precoated galvanised steel crimp curve
1mm thick 35mm wide bright finished stainless steel piano hinges .

each
each
cent
sqm
sqm
each
each
sqm
metre
metre
metre
metre
metre
sqm
metre

Epoxy Grout
Red sand stone gang saw cut 30mm thick.
White sand stone gang saw cut 30mm thick.
Delineator
Precast C.C. Kerb stone M - 25
Thermoplastic paint
Glass beads
Interlocking C.C. paver block ( 60 mm thick, M-30 )
High intensity retro - reflective sheet.
Punched tape concertina coil 600 m dia. 10m openable length (Total
length 90m)
RBT reinforced barbed wire.
Turn buckle and strengthening bolt.
Precast pavement slab 450 x 450 x 50mm (M - 30).
Chain link fabric fencing mesh of size 50x50mm made of G.I. wire of
dia. 4mm.
Chain link fabric fencing mesh of size 50x50mm made of G.I. wire of
dia. 4mm, PVC coated
Chain link fabric fencing mesh of size 25x25mm made of G.I. wire of
dia. 3mm.
Stainless steel cramps with nuts, bolts and washer for dry stone
cladding .
8 mm thick tapered edge calcium silicate board .
10 mm thick calcium silicate board.
Telescopic drawer channels 300mm long .
Stainless steel roller for sliding arrangement in racks/ cupboards/
cabinets shutter .
50mmX42mmX2mm thick Factory made door frame of PVC extruded
sections in white, grey or wo
25mm thick factory made PVC flush door shutter i/c carriage.
Factory made glass reinforced plastic door frame 90x45 mm i/c
carriage.
30 mm thick factory made glass fiber reinforced plastic panel door
shutter i/c carriage.
30mm thick factory made solid PVC profile panelled doort single piece
extruded profile dec
Factory made solid PVC door frame 60 x 30mm i/c carriage.
30 mm thick factory made solid PVC profile panelled door single piece
extruded profile non

One Kg
sqm
sqm
each
cum
kg
kg
sqm
sqm
bundle
metre
each set
each
sqm
sqm
sqm
each
sqm
sqm
set
each
metre
sqm
metre
sqm
One Sqm
metre
One Sqm

Local Market Rates : 2259 of 2298

DSR-12

1457
1458
1459
1460
1461

8713
8714
8715
8716
8717

1462

8719

1463

8720

1464
1465
1466
1467
1468
1469
1470

8721
8722
8723
8724
8725
8726
8727

1471
1472

8730
8731

1473

8732

1474

8733

1475

8735

1476

8736

1477

8737

1478

8738

1479
1480
1481

8739
8740
8741

1482
1483
1484

8742
8743
8744

1485

8745

1486
1487
1488
1489

8750
8751
8752
8753

1490

8754

1491

8755

1492

8756

1493

8757

Fiber glass reinforced plastic chajja.

Magnetic catcher triple strip vertical type.
Magnetic catcher double strip horizontal type.
100 mm mortice lock with 6 levers for aluminium door.
12.5 mm thick Glass fibre reinforced Gypsum board .
2nd class teak wood lipping/ moulded beading or Taj beading of size
18X5mm
Ceiling sections 0.55 mm thick having a knurled web of 51.55mm and
two flanges of 26mm e
Perimeter channel having one flange of 20mm and another flange of
30mm with thickness of 0
Nylon sleeves & wooden screws (40mm)
Counter sunk ribbed head screw 25mm.
12mm thick marine plywood conforming to IS:710
12mm thick fire retardant plywood conforming to IS: 5509.
1.5 mm thick decorative laminated sheet
1.0 mm thick decorative laminated sheet
30 mm thick factory made glass fiber reinforced plastic flush door
shutter i/c carriage.
High polymer modified quickset tile adhesive
Synthetic ployster triangular fibre of length 12mm, effective diameter
10-40 microns and s
Synthetic ployster triangular fibre of length 6mm, effective diameter
10-40 microns and sp
35 mm thick factory made solid panel PVC door shutter of single piece
extruded profile non
35 mm thick factory made solid panel PVC door shutter of single piece
extruded profile dec
Stainless steel wire guage (Grade-304) aperture 1.4mm and 0.50 mm
dia wire
Factory made door frame fire rated ( 60 minutes) made with 16 SWG
G.I. Sheet of section 14
Fire rated door shuttere made with 16 SWG G.I. sheet( 60 minutes)
without panel
Fire seal putty
Clear fire resistant glass panes 6mm thick (60 minutes)
G.I. U beading of 16 SWG G.I. sheet (zinc coating >120gm/sqm) with
ceramic tape of suitabl
Matrix Mineral Board
Panic Bar / latch (Double point)
65mm x 55mm x 2mm thick Factory made door frame of PVC extruded
section in white,grey or w
Zinc alloy (white powder coated) casement handle for uPVC windows

sqm
each
each
each
sqm
metre

Zinc alloy (white powder coated) Touch Lock for uPVC windows
Zinc alloy rollers for uPVC windows
Zinc alloy rollers for uPVC door
Zinc alloy (white powder coated) casement lock for uPVC windows

Each
Each
Each
Each

Stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for uPVC

windows
Stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for uPVC
windows
Stainless steel friction hinge of size 300 mm x 19 x 1.9 mm for uPVC
windows

Each

metre
metre
each
cent
sqm
sqm
sqm
sqm
sqm
per kg
one kg
one kg
One Sqm
One Sqm
One Sqm
One Metre
One Sqm
One Kg
One Sqm
One Metre
One Metre
Each
One Metre
Each

Each
Each

Local Market Rates : 2260 of 2298

DSR-12

Stainless steel friction hinge of size 350 mm x 19 x 1.9 mm for uPVC

windows
Stainless steel friction hinge of size 400 mm x 19 x 1.9 mm for uPVC
windows
uPVC extruded profile casement Window Sash/Mullion ( 67 mm x 75
mm)(Style,rail and interme
uPVC extruded profile casement window glazing bead (35 mm x 18
mm)
uPVC extruded profile Two Track Sliding frame (67 mm x 52 mm)

Each

uPVC extruded profile Sliding window Sash (60 mm x 44 mm)

uPVC extruded profile Sliding Interlock for Window (one vertical length
in each shutter) (
uPVC extruded profile Sliding Door Sash (80 mm x 44 mm)
Aluminium Track on bottom rail for uPVC window
Wool Pine for uPVC window
Aluminium Grill (anodised)
Steel Galvanised tubular reinforcement for uPVC door/ window

One Metre
One Metre

8775
8776
8778
9999
LABOUR :

Stainless steel dash fastener of 8 mm dia and 75 mm long bolt

Toughened glass 12 mm thickness
Co-efficeint for L.S. items (149/100)

Each
One Sqm
L.S.

0003
0100
0101
0102
0103
0111
0112
0113
0114
0115
0116
0117
0119
0122
0123
0124
0125
0126
0127
0128
0130
0131
0132
0133
0134
0135
0138
0139
0141
0155
0156

Hire charges of Diesel Road Roller - 8 to 10 tonne

Bandhani
Bhisti
Blacksmith 1st class
Blacksmith 2nd class
Carpenter 1st class
Carpenter 2nd class
Chowkidar
Beldar
Coolie
Fitter (grade 1)
Assistant Fitter or 2nd class Fitter
Glazier
Mason (for plaster of paris work) 1st class
Mason (brick layer) 1st class
Mason (brick layer) 2nd class
Mason (for plain stone work) 2nd class)
Mason (for ornamental stone work) 1st class
Driver (for Road Roller, Concrete Mixer, Truck etc.)
Mate
Mistry
Painter
Rock Excavator
Rock Breaker
Rock Hole Driller
Stone Chiseller
Sprayer (for bitumen, tar etc.)
Skilled Beldar (for floor rubbing etc.)
White Washer
Mason (average)
Carpenter (average)

L.S.
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day
Day

1494

8758

1495

8759

1496

8766

1497

8767

1498
1499

8768
8769

1500
1501
1502
1503
1504

8770
8771
8772
8773
8774

1505
1506
1507
1508

Each
One Metre
One Metre
One Metre

One Metre
One Metre
One Metre
One Kg
One Metre

Local Market Rates : 2261 of 2298

0157
0159
0160
0161
0768
1235
2342
7754
7772

DSR-12

Operator (Pile/ Special machine)

Skilled torch operator for laying tack
Technician
Helper (technician)
Cement Concrete Jali 50 mm thick
Diesel oil
Carraige of Solvent/ Diesel.
Gravel 5 mm to 10 mm
Pea Gravel

Day
Day
per day
per day
Day
litre
quintal
Day
Day

Local Market Rates : 2262 of 2298

12)

Rate
800.00
800.00
350.00
1600.00
250.00
300.00
130.00
775.00
500.00
300.00
300.00
5000.00
740.00
1700.00
5000.00
200.00
7500.00
325.00
400.00
4000.00
34000.00
2200.00
4200.00
35000.00
9250.00
30.00
750.00
6500.00
1350.00
1350.00
1800.00
900.00
2450.00
800.00
3.00
1550.00
460.00
1150.00
150.00
325.00
1200.00
800.00
23700.00
17500.00
2700.00
1000.00

DSR-12

Local Market Rates : 2263 of 2298

2500.00
900.00
700.00
360.00
14000.00
3000.00
35.00
250.00
200.00
200.00
200.00
280.00
200.00
150.00
310.00
390.00
395.00
140.00
514.00
250.00
182.00
206.00
475.00
490.00
500.00
850.00
900.00
950.00
1000.00
1050.00
1050.00
1050.00
1100.00
37.00
47.00
900.00
300.00
375.00
37000.00
28500.00
41400.00
37000.00
26.00
40.00
350.00
55.00
50.00
25.00
35.00
15.00
360.00

DSR-12

Local Market Rates : 2264 of 2298

270.00
315.00
350.00
325.00
235.00
155.00
455.00
325.00
20.00
18.00
5000.00
12000.00
400.00
70.00
800.00
650.00
400.00
175.00
2900.00
2600.00
900.00
2600.00
2300.00
2000.00
1600.00
300.00
250.00
150.00
500.00
350.00
300.00
225.00
175.00
140.00
90.00
140.00
120.00
85.00
140.00
125.00
95.00
160.00
150.00
350.00
300.00
160.00
700.00
675.00

DSR-12

Local Market Rates : 2265 of 2298

625.00
600.00
500.00
45.00
120.00
100.00
90.00
120.00
170.00
190.00
30.00
700.00
600.00
500.00
450.00
300.00
100.00
120.00
40.00
30.00
200.00
160.00
130.00
95.00
80.00
950.00
810.00
675.00
425.00
185.00
160.00
140.00
120.00
500.00
90.00
140.00
120.00
100.00
500.00
45.00
230.00
190.00

DSR-12

Local Market Rates : 2266 of 2298

150.00
115.00
100.00
180.00
250.00
330.00
130.00
80.00
60.00
45.00
35.00
60.00
50.00
40.00
30.00
25.00
5.00
130.00
80.00
55.00
45.00
320.00
300.00
225.00
190.00
105.00
100.00
80.00
110.00
105.00
85.00
40.00
90.00
80.00
45.00
40.00
40.00
35.00
25.00
20.00
17.00
15.00
14.00
120.00
100.00
75.00
70.00
50.00
45.00
35.00

DSR-12

Local Market Rates : 2267 of 2298

30.00
550.00
510.00
500.00
480.00
490.00
475.00
450.00
390.00
155.00
125.00
700.00
580.00
450.00
360.00
280.00
470.00
360.00
300.00
125.00
1600.00
1450.00
1300.00
1100.00
950.00
850.00
280.00
110.00
170.00
290.00
80.00
400.00
450.00
65.00
180.00
145.00
30.00
300.00
410.00
230.00
220.00
1000.00
180.00
180.00

DSR-12

Local Market Rates : 2268 of 2298

140.00
38.00
200.00
350.00
180.00
103.00
125.00
55.00
450.00
50.00
35.00
42.00
80.00
80.00
85.00
23.50
115.00
105.00
85.00
90.00
125.00
120.00
130.00
135.00
165.00
110.00
40.00
175.00
65.00
125.00
125.00
70.00
30.00
90.00
7.00
4.00
8.00
10.00
55.00
70.00
60.00
25.00
325.00
270.00
30.00
1150.00

DSR-12

Local Market Rates : 2269 of 2298

550.00
250.00
330.00
520.00
550.00
30.00
90.00
1120.00
640.00
4750.00
110.00
130.00
205.00
65.00
40.00
4100.00
4000.00
4050.00
4500.00
4500.00
4250.00
4250.00
4200.00
4150.00
4500.00
48.00
4600.00
270.00
30.00
4800.00
430.00
20.00
90.00
10.00
25.00
70.00
5175.00
15.00
20.00
15.00
5400.00
5400.00
35.00
20.00
9.00
60.00
1100.00
675.00
420.00

DSR-12

Local Market Rates : 2270 of 2298

925.00
60.00
65.00
280.00
155.00
170.00
120.00
270.00
175.00
165.00
185.00
900.00
915.00
700.00
105000.00
70000.00
80000.00
64000.00
72000.00
48000.00
30000.00
25000.00
25000.00
50000.00
65000.00
240.00
220.00
200.00
482.00
35.00
25.00
32.00
30.00
32.00
25.00
1.50
1.50
400.00
52.00
45.00
5400.00
110.00
4200.00
3950.00
300.00
260.00
225.00
11500.00
8.00
51.00
1750.00
100.00

DSR-12

Local Market Rates : 2271 of 2298

185.00
205.00
53.00
26.00
27.00
33.00
17.00
15.00
25.00
29.00
44.00
50.00
165.00
215.00
165.00
215.00
27.00
280.00
200.00
1415.00
980.00
4435.00
2210.00
115.00
145.00
205.00
90.00
15.00
25.00
30.00
15.00
11.00
14.00
15.00
17.00
22.00
32.00
40.00
45.00
67.00
84.00
106.00
118.00
290.00
650.00
90.00
3450.00
3550.00
5300.00
5600.00
335.00
240.00
380.00

DSR-12

Local Market Rates : 2272 of 2298

490.00
570.00
170.00
230.00
290.00
365.00
81.00
97.00
134.00
167.00
202.00
254.00
325.00
426.00
8.00
18.00
42.00
270.00
61.00
890.00
990.00
1630.00
170.00
210.00
470.00
187.00
233.00
240.00
310.00
260.00
350.00
335.00
490.00
395.00
530.00
137.00
187.00
40.00
60.00
70.00
100.00
135.00
180.00
390.00
480.00

DSR-12

Local Market Rates : 2273 of 2298

4.45
350.00
390.00
510.00
550.00
200.00
239.00
290.00
387.00
382.00
510.00
466.00
545.00
253.00
350.00
98.00
133.00
26.00
33.00
33.00
43.00
550.00
135.00
154.00
188.00
261.00
380.00
454.00
732.00
995.00
960.00
1125.00
1420.00
1730.00
1760.00
20.00
25.00
40.00
49.00
75.00

DSR-12

Local Market Rates : 2274 of 2298

89.00
109.00
121.00
172.00
210.00
256.00
283.00
330.00
36.00
53.00
91.00
130.00
1350.00
820.00
1525.00
310.00
293.00
40.00
55.00
40.00
495.00
170.00
115.00
158.00
200.00
125.00
308.00
263.00
198.00
70.00
104.00
195.00
460.00
740.00
190.00
270.00
315.00
305.00
370.00
450.00
650.00
900.00
1550.00
310.00
400.00
510.00
780.00

DSR-12

Local Market Rates : 2275 of 2298

1420.00
2030.00
2300.00
2600.00
3410.00
6550.00
9550.00
13500.00
675.00
580.00
405.00
55.00
62.00
340.00
750.00
680.00
10.00
11.00
13.00
13.00
14.00
15.00
27.00
29.00
35.00
1250.00
100.00
7.75
3100.00
3600.00
100.11
233.60
87.60
87.60
100.11
77.87
95.22
140.16
87.60
77.87
87.60
103.06
77.87
116.80
233.60
389.33
667.43
109.50
95.22
95.22

DSR-12

Local Market Rates : 2276 of 2298

87.60
87.60
87.60
87.60
87.60
87.60
77.87
77.87
191.48
319.12
737.68
911.78
2127.50
77.87
3191.25
77.67
77.67
87.60
77.67
95.22
191.48
256.77
319.12
519.11
737.68
911.78
1276.50
1740.68
2127.50
2127.50
3191.25
2127.50
4786.87
6382.50
6382.50
6382.80
87.60
77.87
191.48
319.12
519.11
737.68
911.78
1276.50
1740.68
2127.50
2127.50
3191.25
3191.25
3191.25
4786.87
6382.50
228.00
323.00

DSR-12

Local Market Rates : 2277 of 2298

275.00
67.50
87.75
129.50
191.25
230.50
310.00
450.00
340.00
580.00
35.00
44.00
65.00
70.00
75.00
95.00
60.00
535.00
21.00
46.00
46.00
31000.00
145.00
62.00
70.00
82.00
103.00
960.00
775.00
845.00
7300.00
680.00
35000.00
250.00
293.00
364.00
425.00
560.00

DSR-12

Local Market Rates : 2278 of 2298

2900.00
2450.00
210.00
1080.65
130.00
130.00
675.00
340.00
750.00
750.00
1150.00
1150.00
330.00
360.00
1050.00
1050.00
23.00
37500.00
31.00
33.00
5075.00
320.00
490.00
680.00
930.00
1650.00
995.00
130.00
530.00
2630.00
2650.00
3200.00
4000.00
9100.00
13500.00
17000.00
5822.50
175.00
1130.00
985.00
270.00
215.00
235.00

DSR-12

Local Market Rates : 2279 of 2298

175.00
275.00
240.00
430.00
310.00
465.00
350.00
565.00
450.00
610.00
475.00
560.00
630.00
780.00
850.00
395.00
303.00
525.00
405.00
505.00
700.00
215.00
270.00
370.00
270.00
355.00
335.00
440.00
370.00
260.00
190.00
175.00
185.00
130.00
215.00
246.00
118.00
8460.00
4500.00
325.00
120.00
220.00

DSR-12

Local Market Rates : 2280 of 2298

240.00
270.00
48.00
58.00
65.00
50.00
25.00
72.00
68.00
270.00
32.00
272.00
200.00
15.00
1850.00
610.00
660.00
470.00
500.00
250.00
300.00
425.00
890.00
1550.00
3000.00
160.00
39.00
27.00
42.00
19.00
6.20
4.00
22.00
24.00
140.00
13.00
56.00
85.00
160.00
7.00
8100.00
927.00
230.00
237.00
271.00
315.00
75.00

DSR-12

Local Market Rates : 2281 of 2298

67.00
6.00
7.00
40.00
930.00
1010.00
270.00
305.00
10.00
20.00
40.75
419.40
26.25
15.00
390.00
45.00
58.00
810.00
21.00
18.00
17.00
470.00
545.00
4548.00
2409.60
13208.00
3029.60
12592.75
520.00
505.00
130.00
155.00
5150.00
4900.00
4200.00
2900.00
2950.00
2750.00
2050.00
1275.00

DSR-12

Local Market Rates : 2282 of 2298

1080.00
1500.00
475.00
390.00
260.00
300.00
670.00
170.00
21.00
27.00
26.00
28.00
685.00
975.00
1400.00
170.00
225.00
690.00
600.00
560.00
660.00
630.00
1030.00
1150.00
1780.00
1930.00
1850.00
1580.00
1630.00
1385.00

DSR-12

Local Market Rates : 2283 of 2298

66500.00
100.00
46.00
42.00
3100.00
60.00
22.00
67.00
129.00
16.00
20.00
34.00
52.00
50.00
81.00
95.00
128.00
115.00
180.00
56.00
95.00
107.00
207.00
16.00
31.00
145.00
204.00
65.00
230.00
360.00
315.00
350.00
250.00
1630.00
1825.00
33200.00
40300.00
48500.00
15000.00
23000.00

DSR-12

Local Market Rates : 2284 of 2298

29500.00
15000.00
23500.00
37.00
120.00
170.00
325.00
330.00
350.00
350.00
370.00
12150.00
460.00
39.00
870.00
40000.00
160.00
1550.00
1640.00
220.00
320.00
38500.00
8.00
9.00
12.00
14.00
36.50
1050.00
38.00
50.00
62.00
80.00
16.00
18.00
300.00
1160.00
97.00
77.00
280.00
1040.00
340.00
1220.00
830.00
305.00

DSR-12

Local Market Rates : 2285 of 2298

320.00
1825.00
1150.00
422.00
1170.00
55.00
28.00
10.00
14.00
110.00
640.00
490.00
530.00
600.00
525.00
230.00
60.00
72.00
440.00
1010.00
1240.00
1800.00
1440.00
650.00
305.00
27700.00
45.00
48.00
40.00
25.00
50.00
64.00
70.00
1525.00
28.00
1675.00
180.00
800.00
75.00
100.00
140.00
160.00
100.00

DSR-12

Local Market Rates : 2286 of 2298

130.00
160.00
90.00
80.00
31.00
225.00
37.00
101.00
3370.00
4930.00
6400.00
2030.00
3150.00
4560.00
5100.00
2620.00
4180.00
5420.00
7550.00
180.00
390.00
351.00
360.00
12.00
14.00
26.00
480.00
60.00
13.00
10.00
790.00
208.00
255.00
610.00
680.00
480.00
690.00
810.00
880.00
720.00
39.00
49.00
51.00

DSR-12

Local Market Rates : 2287 of 2298

64.00
317.00
345.00
134.00
195.00
420.00
780.00
1150.00
130.00
87.00
145.00
116.00
192.00
226.00
258.00
127.00
120.00
30.00
34.00
42.00
56.00
65.00
80.00
27.00
272.00
367.00
622.00
950.00
797.00
1170.00
1595.00
2105.00
2680.00
3225.00
4350.00
5085.00
6180.00
7430.00
10050.00
11350.00
11990.00
14030.00
15750.00
26.00
36.00
62.00

DSR-12

Local Market Rates : 2288 of 2298

73.00
103.00
127.00
234.00
260.00
285.00
352.00
542.00
636.00
684.00
915.00
1138.00
11850.00
16280.00
12540.00
17580.00
2025.00
2825.00
3740.00
4935.00
6330.00
8020.00
9645.00
11675.00
13895.00
18760.00
23275.00
830.00
1040.00
1240.00
2120.00
2830.00
3740.00
4500.00
5870.00
7100.00
8250.00
11450.00

DSR-12

Local Market Rates : 2289 of 2298

5850.00
7500.00
8200.00
8880.00
1260.00
1960.00
3170.00
3730.00
4770.00
6080.00
7890.00
9940.00
12390.00
15330.00
708.00
1035.00
1415.00
1920.00
2638.00
3135.00
3714.00
4411.00
5214.00
6801.00
8739.00
11156.00
14617.00
15485.00
3900.00
3300.00
3600.00
38500.00
38800.00
28200.00
1042.00
1250.00
460.00

DSR-12

Local Market Rates : 2290 of 2298

834.75
150.00
180.00
170.00
200.00
465.15
840.00
332.00
625.00
750.00
385.00
390.00
120.00
140.00
750.00
600.00
165.00
200.00
250.00
164.01
1586.25
1017.17
67.50
160.80
630.00
295.00
360.00
367.00
510.00
535.00
3630.00
1690.00
1470.00
392.00
424.00
1090.00
77.00
94.00
133.00
173.00
33.00
38.00
32.00

DSR-12

Local Market Rates : 2291 of 2298

38.00
57.00
3150.00
4150.00
3800.00
3550.00
3700.00
2025.00
2125.00
2025.00
2420.00
173.00
142.00
330.00
450.00
79.00
59.00
99.00
167.00
207.00
245.00
71.00
32.00
240.00
195.00
145.00
95.00
240.00
215.00
145.00
125.00
320.00
230.00
195.00
320.00
160.00
83.00
70.00
90.00
111.00
143.00

DSR-12

Local Market Rates : 2292 of 2298

193.00
310.00
335.00
127.00
39.00
272.00
130.00
230.00
198.00
63.00
83.00
107.00
858.00
192.00
125.00
77.00
39.00
0.55
894.00
998.00
809.00
906.00
468.00
484.00
180.00
155.00
164.00
5.00
11.00
11.00
9.00
187.00
118.00
72.00
34.00
7.00
6.00
3.00
735.00
865.00
1070.00
1630.00
32.00

DSR-12

Local Market Rates : 2293 of 2298

50.00
76.00
124.00
196.00
286.00
445.00
640.00
1020.00
1070.00
2255.00
51.00
63.00
90.00
120.00
170.00
280.00
835.00
1185.00
1640.00
2870.00
307.00
29.00
2290.00
168.00
189.00
236.00
437.00
793.00
1.55
2025.00
455.00
53.00
4300.00
645.00
40.00
41.00
42.00
49.00

DSR-12

Local Market Rates : 2294 of 2298

54.00
59.00
32.00
465.00
538.00
29.00
10.20
435.00
440.00
440.00
455.00
455.00
445.00
475.00
37.00
500.00
400.00
435.00
310.00
4025.00
63.00
62.00
325.00
1525.00
730.00
8.50
40.00
55.00
258.00
285.00
340.00
84.00
223.00
370.00
135.00
8.00
135.00
2050.00
365.00
1715.00
2500.00
270.00
2120.00

DSR-12

Local Market Rates : 2295 of 2298

3460.00
15.00
12.00
310.00
160.00
25.00
39.00
25.00
1.90
72.00
825.00
860.00
475.00
350.00
1975.00
16.00
365.00
365.00
2088.00
2536.00
760.00
0.00
4850.00
675.00
19800.00
247.00
61.85
5000.00
318.00
150.00
100.00
50.00
80.00
100.00
225.00
275.00
350.00

DSR-12

Local Market Rates : 2296 of 2298

400.00
500.00
250.00
78.00
235.00
212.00
45.00
275.00
20.00
15.00
250.00
50.00
20.00
1800.00
1.49
0.00
1500.00
260.00
260.00
301.00
273.00
301.00
273.00
247.00
247.00
247.00
301.00
273.00
273.00
301.00
301.00
273.00
273.00
301.00
301.00
260.00
301.00
273.00
247.00
247.00
247.00
260.00
260.00
260.00
260.00
287.00
287.00

DSR-12

Local Market Rates : 2297 of 2298

327.00
301.00
700.00
300.00
210.00
41.29
8.76
650.00
650.00

DSR-12

Local Market Rates : 2298 of 2298