Scribd
Upload
1K views

Degree With Minute Tolerance Calculation

There are three ways to measure the size of an angle: degrees, minutes, and seconds. A full circle contains 360 degrees. Each degree is divided into 60 minutes, and each minute is further divided into 60 seconds. For example, an angle could be expressed as 40 degrees, 20 minutes, and 50 seconds. This represents 40 full degrees plus 20/60 degrees (20 minutes) plus 50/3600 degrees (50 seconds). Converting between decimal degrees and degrees-minutes-seconds involves calculating the fractional portions of degrees represented by minutes and seconds.

Uploaded by

vkms
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

Degree With Minute Tolerance Calculation

There are three ways to measure the size of an angle: degrees, minutes, and seconds. A full circle contains 360 degrees. Each degree is divided into 60 minutes, and each minute is further divided into 60 seconds. For example, an angle could be expressed as 40 degrees, 20 minutes, and 50 seconds. This represents 40 full degrees plus 20/60 degrees (20 minutes) plus 50/3600 degrees (50 seconds). Converting between decimal degrees and degrees-minutes-seconds involves calculating the fractional portions of degrees represented by minutes and seconds.

Uploaded by

vkms
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Degrees, Minutes, Seconds

Trigonometry Realms Mathematics Contents Index Home

There are several ways to measure the size of an angle. One way is to use units of degrees. (Radian measure is another way.) In a complete circle there are three hundred and sixty degrees. An angle could have a measurement of 35.75 degrees. That is, the size of the angle in this case would be thirty-five full degrees plus seventy-five hundredths, or three fourths, of an additional degree. Notice that here we are expressing the measurement as a decimal number. Using decimal numbers like this one can express angles to any precision - to hundredths of a degree, to thousandths of a degree, and so on.

There is another way to state the size of an angle, one that subdivides a degree using a system different than the decimal number example given above. The degree is divided into sixty parts called minutes. These minutes are further divided into sixty parts called seconds. The words minute and second used in this context have no immediate connection to how those words are usually used as amounts of time. In a full circle there are 360 degrees. Each degree is split up into 60 parts, each part being 1/60 of a degree. These parts are called minutes. Each minute is split up into 60 parts, each part being 1/60 of a minute. These parts are called seconds.

The size of an angle could be stated this way: 40 degrees, 20 minutes, 50 seconds. There are symbols that are used when stating angles using degrees, minutes, and seconds. Those symbols are show in the following table. Symbol for degree: Symbol for minute: Symbol for second:

So, the angle of 40 degrees, 20 minutes, 50 seconds is usually written this way:

How could you state the above as an angle using common decimal notation? The angle would be this many degrees, (* means times.):

40 + (20 * 1/60) + (50 * 1/60 * 1/60)


That is, we have 40 full degrees, 20 minutes - each 1/60 of a degree, and 50 seconds each 1/60 of 1/60 of a degree. Work that out and you will get a decimal number of degrees. It's 40.34722...

Going the other way is a bit more difficult. Suppose we start with 40.3472 degrees. Can we express that in units of degrees, minutes, and seconds? Well, first of all there are definitely 40 degrees full degrees. That leaves 0.3472 degrees. So, how many minutes is 0.3472 degrees? Well, how many times can 1/60 go into 0.3472? Here's the same question: What is 60 times 0.3472? It's 20.832. So, there are 20 complete minutes with 0.832 of a minute remaining.

How many seconds are in the last 0.832 minutes. Well, how many times can 1/60 go into 0.832, or what is 60 times 0.832? It's 49.92, or almost 50 seconds. So, we've figured that 40.3472 degrees is almost exactly equal to 40 degrees, 20 minutes, 50 seconds. (The only reason we fell a bit short of 50 seconds is that we really used a slightly smaller angle in this second half of the calculation explanation. In the original angle, 40.34722... degrees, the decimal repeats the last digit of 2 infinitely, so, the original angle is a bit bigger than 40.3472.)

Here's a calculator that will take you from angle measurement using degrees, minutes, and seconds to angle measurement expressed as a decimal number. Make up an angle measurement using degrees, minutes, and seconds. Then, using the above procedures, calculate what that angle measurement would be if it were expressed as a decimal number. Finally, enter your original angle in degrees, minutes, and seconds into this calculator, click the 'Calculate' button, and see if your conversion mathematics was correct. Only enter positive integers into this calculator. That is, do not enter any numbers like 5.5, -5.5, or -5. Degrees: Minutes: Seconds:
0

You might also like